MIPs logo MIPdatabase     Cranfield University Short course banner: Biosensors Technology - Advances and Market Drivers

kaempferol

Huang ZJ et al., Preparing molecularly imprinted membranes by phase inversion to separate kaempferol.
Polymers for Advanced Technologies, 28, (3), 373-378, (2017)
   

kaempferol

Huang ZJ et al., Surface molecularly imprinted polymer microspheres based on nano-TiO2 for selective recognition of kaempferol.
Journal of Applied Polymer Science, 134, (23), ArticleNo44888-(2017)
   

kaempferol

Xia Q et al., Preparation and characterization of monodisperse molecularly imprinted polymer microspheres by precipitation polymerization for kaempferol.
Designed Monomers and Polymers, 20, (1), 201-209, (2017)
   

kaempferol

Cai PS et al., Preparation of magnetic molecularly imprinted polymers for selective isolation and determination of kaempferol and protoapigenone in Macrothelypteris torresiana.
Journal of Huazhong University of Science and Technology (Medical Sciences), 34, (6), 845-855, (2014)
   

kaempferol

Gupta VK et al., A novel molecular imprinted nanosensor based quartz crystal microbalance for determination of kaempferol.
Sensors and Actuators B: Chemical, 194, 79-85, (2014)
   

kaempferol

Zhang ZM et al., Preparation and adsorption performance of molecularly imprinted polymers for Kaempferol.
Desalination and Water Treatment, 51, (19-21), 3914-3919, (2013)
   

kaempferol

Yu LZ et al., Preparation and Application for Kaempferol Molecularly-imprinted Polymers.
Chemistry and Industry of Forest Products, 31, (4), 19-24, (2011)
   

kaempferol

He MQ et al., Synthesis and Characterization of Kaempferol Molecularly Imprinted Polymers.
Chemical World, 51, (11), 670-674, (2010)
   

Kaldnes carrier

Le Noir M et al., Removal of endocrine-disrupting compounds from water using macroporous molecularly imprinted cryogels in a moving-bed reactor.
Journal of Separation Science, 32, (9), 1471-1479, (2009)
   

Kallikrein

Book chapter, Xu JJet al., Guide to the Preparation of Molecularly Imprinted Polymer Nanoparticles for Protein Recognition by Solid-Phase Synthesis, 
In: NanoArmoring of Enzymes: Rational Design of Polymer-Wrapped Enzymes, Kumar CV (Ed.) 
Academic Press: 115-141, (2017)
   

Kanamycin

Khan S et al., Thioglycolic acid-CdTe quantum dots sensing and molecularly imprinted polymer based solid phase extraction for the determination of kanamycin in milk, vaccine and stream water samples.
Sensors and Actuators B: Chemical, 246, 444-454, (2017)
   

Kanamycin

Lian WJ et al., A novel strategy to improve the sensitivity of antibiotics determination based on bioelectrocatalysis at molecularly imprinted polymer film electrodes.
Biosensors and Bioelectronics, 73, 214-220, (2015)
   

Kanamycin

Long F et al., Imprinted electrochemical sensor based on magnetic multi-walled carbon nanotube for sensitive determination of kanamycin.
Journal of Electroanalytical Chemistry, 755, 7-14, (2015)
   

Kaoline composites

Xie QJ et al., Molecularly imprinted β-cyclodextrin/Kaoline particles for the selective recognition and binding of bisphenol A.
The Canadian Journal of Chemical Engineering, 92, (4), 720-728, (2014)
   

Kaolinite

Mao YL et al., Synthesis of surface imprinted polymer upon modified kaolinite and study on the selective adsorption of BPA.
Desalination and Water Treatment, 57, (9), 3947-3956, (2016)
   

Kaolinite

Guo WL et al., Selective adsorption and separation of BPA from aqueous solution using novel molecularly imprinted polymers based on kaolinite/Fe3O4 composites.
Chemical Engineering Journal, 171, (2), 603-611, (2011)
   

Kelthane

Li SH et al., Synergetic recognition and separation of kelthane and pyridaben base on magnetic molecularly imprinted polymer nanospheres.
Journal of Separation Science, 39, (20), 4019-4026, (2016)
   

Kelvin Probe

Pohle R et al., Detection of Explosives based on the Work Function Read-out of Molecularly Imprinted Polymers.
Procedia Engineering, 47, 1370-1373, (2012)
   

kemp elimination

Bonomi P et al., Modulation of imprinting efficiency in nanogels with catalytic activity in the Kemp elimination.
Journal of Molecular Recognition, 25, (6), 352-360, (2012)
   

Kendir extract

Yin XY et al., Determination of hyperoside and isoquercitrin in rat plasma by membrane-protected micro-solid-phase extraction with high-performance liquid chromatography.
Journal of Separation Science, 35, (3), 384-391, (2012)
   

Ketamine

Meng L et al., Fast screening of ketamine in biological samples based on molecularly imprinted photonic hydrogels.
Analytica Chimica Acta, 771, 86-94, (2013)
   

Ketamine

Harun N et al., Analysis of ketamine and norketamine in hair samples using molecularly imprinted solid-phase extraction (MISPE) and liquid chromatography–tandem mass spectrometry (LC-MS/MS).
Analytical and Bioanalytical Chemistry, 396, (7), 2449-2459, (2010)
   

2-keto-3-deoxy-d-manno-octulosonate

Barbani N et al., Molecularly imprinted polymers by phase inversion technique for the selective recognition of saccharides of biomedical interest in aqueous solutions.
Polymer International, 66, (6), 900-907, (2017)
   

ketoprofen

Gañán J et al., Evaluation of mesoporous imprinted silicas as MSPD selective sorbents of ketoprofen in powder milk.
Materials Letters, 197, 5-7, (2017)
   

ketoprofen

Gao SP et al., Molecularly imprinted polymer prepared with polyhedral oligomeric silsesquioxane through reversible addition-fragmentation chain transfer polymerization.
Analytical and Bioanalytical Chemistry, 409, (15), 3741-3748, (2017)
   

ketoprofen

Zunngu SS et al., Synthesis and application of a molecularly imprinted polymer in the solid-phase extraction of ketoprofen from wastewater.
Comptes Rendus Chimie, 20, (5), 585-591, (2017)
   

ketoprofen

Sun X et al., Thermoresponsive ketoprofen-imprinted monolith prepared in ionic liquid.
Analytical and Bioanalytical Chemistry, 406, (22), 5359-5367, (2014)
   

ketoprofen

Jiang JB et al., Novel molecularly imprinted microsphere using a single chiral monomer and chirality-matching (S)-ketoprofen template.
Journal of Chromatography A, 1218, (24), 3763-3770, (2011)
   

ketoprofen

Zhao L et al., Preparation and characterization of imprinted monolith with metal ion as pivot.
Journal of Chromatography A, 1218, (50), 9071-9079, (2011)
   

ketoprofen

Zaidi SA et al., Preparation of an open-tubular capillary column with a monolithic layer of S-ketoprofen imprinted and 4-styrenesulfonic acid incorporated polymer and its enhanced chiral separation performance in capillary electrochromatography.
Journal of Chromatography A, 1216, (14), 2947-2952, (2009)
   

ketoprofen

Hung CY et al., Synthesis and molecular recognition of molecularly imprinted polymer with ibuprofen as template.
Journal of the Chinese Chemical Society, 53, (5), 1173-1180, (2006)
   

Ketoproxen

Zhong SA et al., Preparation and separation of cellulose acetate-(S)-naproxen molecularly imprinted composite membrane.
Journal of Central South University (Science and Technology), 37, (6), 1122-1126, (2006)
   

Ketotifen

Alvarez-Lorenzo C et al., Ocular drug delivery from molecularly-imprinted contact lenses.
Journal of Drug Delivery Science and Technology, 20, (4), 237-248, (2010)
   

Ketotifen fumarate

Tieppo A et al., Sustained in vivo release from imprinted therapeutic contact lenses.
Journal of Controlled Release, 157, (3), 391-397, (2012)
   

key to success,designing MIP sensors - addressing or circumventing limitations of imprinting process

Book chapter, Zhang YGet al., Molecular Imprinting and Sensor Development, 
In: Chemosensors, Wang B, Anslyn EV (Eds.) 
John Wiley & Sons, Inc.: Hoboken, N.J., 107-120, (2011)
   

KGLVDDADI (lys-gly-leu-val-asp-asp-ala-asp-ile)

Gupta N et al., An epitope-imprinted piezoelectric diagnostic tool for Neisseria meningitidis detection.
Journal of Molecular Recognition, 29, (12), 572-579, (2016)
   

Kidney

Lombardo-Agüí M et al., Laser induced fluorescence coupled to capillary electrophoresis for the determination of fluoroquinolones in foods of animal origin using molecularly imprinted polymers.
Journal of Chromatography A, 1217, (15), 2237-2242, (2010)
   

Kidney analysis

Wen YP et al., Imprinted voltammetric streptomycin sensor based on a glassy carbon electrode modified with electropolymerized poly(pyrrole-3-carboxy acid) and electrochemically reduced graphene oxide.
Microchimica Acta, 184, (3), 935-941, (2017)
   

Kidney disease

Mohabbati-Kalejahi E et al., A review on creatinine measurement techniques.
Talanta, 97, 1-8, (2012)
   

Kinetic

Zhu F et al., Selective adsorption behavior of Cd(II) ion imprinted polymers synthesized by microwave-assisted inverse emulsion polymerization: Adsorption performance and mechanism.
Journal of Hazardous Materials, 321, 103-110, (2017)
   

Kinetic

de Oliveira FM et al., Hybrid molecularly imprinted poly(methacrylic acid-TRIM)-silica chemically modified with (3-glycidyloxypropyl)trimethoxysilane for the extraction of folic acid in aqueous medium.
Materials Science and Engineering: C, 59, 643-651, (2016)
   

Kinetic

Wong A et al., Study on the cross-linked molecularly imprinted poly(methacrylic acid) and poly(acrylic acid) towards selective adsorption of diuron.
Reactive and Functional Polymers, 100, 26-36, (2016)
   

Kinetic

Muzyka KM, Computational experiments for investigation of the «template»-«artificial receptors» formation kinetics.
Technology Audit and Production Reserves, 3, (2), 70-73, (2015)
   

Kinetic

Clausen DN et al., Improved selective cholesterol adsorption by molecularly imprinted poly(methacrylic acid)/silica (PMAA-SiO2) hybrid material synthesized with different molar ratios.
Materials Science and Engineering: C, 44, 99-108, (2014)
   

Kinetic

Faghihian H et al., Kinetics & thermodynamics of Cu(II) adsorption by imprinted salen-functionalized silica gel.
Desalination and Water Treatment, 52, (37-39), 7205-7217, (2014)
   

Kinetic

Sid Kalal H et al., Adsorption of Strontium (II) on new ion-imprinted solid-phase support: determination, isotherms, thermodynamic and kinetic studies.
Caspian Journal of Environmental Sciences, 11, (1), 53-63, (2013)
   

Kinetic

Nie GJ et al., Characterization of Bioimprinted Tannase and Its Kinetic and Thermodynamics Properties in Synthesis of Propyl Gallate by Transesterification in Anhydrous Medium.
Applied Biochemistry and Biotechnology, 167, (8), 2305-2317, (2012)
   

Kinetic

Salehi E et al., Thermodynamic investigation and mathematical modeling of ion-imprinted membrane adsorption.
Journal of Membrane Science, 389, (1), 334-342, (2012)
   

Kinetic

Singh DK et al., Synthesis and characterization of Hg(II)-ion-imprinted polymer: Kinetic and isotherm studies.
Desalination, 257, (1-3), 177-183, (2010)
   

Kinetic

Zhang ZL et al., Kinetic and thermodynamic analysis of selective adsorption of Cs(I) by a novel surface whisker-supported ion-imprinted polymer.
Desalination, 263, (1-3), 97-106, (2010)
   

Kinetic

Yang L et al., Capacitive biosensor for glutathione detection based on electropolymerized molecularly imprinted polymer and kinetic investigation of the recognition process.
Electroanalysis, 17, (11), 969-977, (2005)
   

Kinetic adsorption

Xu ZX et al., Synthesis and characterization of molecularly imprinted novel functional absorbent of endocrine-disrupting compounds estrone.
Ion Exchange and Adsorption, 24, (6), 489-495, (2008)
   

Kinetic and thermodynamic data

Tarley CRT et al., Ion-imprinted polyvinylimidazole-silica hybrid copolymer for selective extraction of Pb(II): Characterization and metal adsorption kinetic and thermodynamic studies.
Reactive and Functional Polymers, 72, (1), 83-91, (2012)
   

kinetic model

Liu YW, Selective sorption of Pb(II) from aqueous solution using an imprinted silica-supported sorbent based on the solgel imprinting technique.
Desalination and Water Treatment, 57, (39), 18417-18424, (2016)
   

kinetic model

Zarghami S et al., Adsorption Behavior of Cu(II) Ions on Crosslinked Chitosan/Polyvinyl Alcohol Ion Imprinted Membrane.
Journal of Dispersion Science and Technology, 36, (2), 190-195, (2015)
   

kinetic model

He KC et al., Selective adsorption of L-TA/D-TA by β-cyclodextrin derivative modified with l-tryptophan: Isotherm, kinetic and thermodynamics studies.
Journal of Industrial and Engineering Chemistry, 20, (4), 1293-1300, (2014)
   

kinetic model

Liu YQ et al., Adsorption of Cr(VI) by modified chitosan from heavy-metal polluted water of Xiangjiang River, China.
Transactions of Nonferrous Metals Society of China, 23, 3095-3103, (2013)
   

Kinetic modeling and isotherm

Ahamed MEH et al., Ion imprinted polymers for the selective extraction of silver(I) ions in aqueous media: Kinetic modeling and isotherm studies.
Reactive and Functional Polymers, 73, (3), 474-483, (2013)
   

Kinetic models

Fan DX et al., Synthesis and characterization of hollow porous molecular imprinted polymers for the selective extraction and determination of caffeic acid in fruit samples.
Food Chemistry, 224, 32-36, (2017)
   

Kinetic parameters

Eser A et al., Removal of erythrosine dye from aqueous solutions using magnetic chitosan with erythrosine as imprinted molecules.
Desalination and Water Treatment, 57, (36), 17002-17010, (2016)
   

kinetic release

Otero-Pazos P et al., Active Food Packaging Based on Molecularly Imprinted Polymers: Study of the Release Kinetics of Ferulic Acid.
Journal of Agricultural and Food Chemistry, 62, (46), 11215-11221, (2014)
   

kinetic resolution

Graber M et al., Improved racemate resolution of pentan-2-ol and trans-(Z)-cyclooct-5-ene-1,2-diol by lipase catalysis.
Journal of Biotechnology, 238, 60-68, (2016)
   

kinetic resolution

Weiser D et al., Bioimprinted lipases in PVA nanofibers as efficient immobilized biocatalysts.
Tetrahedron, 72, (46), 7335-7342, (2016)
   

kinetic resolution

Mukherjee J et al., Molecular bioimprinting of lipases with surfactants and its functional consequences in low water media.
International Journal of Biological Macromolecules, 81, 544-551, (2015)
   

kinetics

Huang HL et al., Synthesis and characterization of a novel quercetin magnetic molecularly imprinted polymer via reversible addition fragmentation chain transfer strategy.
Journal of Macromolecular Science, Part A, 54, (7), 446-451, (2017)
   

kinetics

Song XL et al., Effective and selective adsorption of As(III) via imprinted magnetic Fe3O4/HTCC composite nanoparticles.
Journal of Environmental Chemical Engineering, 5, (1), 16-25, (2017)
   

kinetics

Ahamed MEH et al., Statistical Optimization, Kinetic and Isotherm Studies on Selective Adsorption of Silver and Gold Cyanocomplexes Using Aminoguanidyl-Chitosan Imprinted Polymers.
Journal of Advanced Chemical Engineering, 6, (2), ArticleNo149-(2016)
   

kinetics

Cao FM et al., Synthesis of a perfluorooctanoic acid molecularly imprinted polymer for the selective removal of perfluorooctanoic acid in an aqueous environment.
Journal of Applied Polymer Science, 133, (15), ArticleNo43192-(2016)
   

kinetics

de Oliveira FM et al., Evaluation of a new water-compatible hybrid molecularly imprinted polymer combined with restricted access for the selective recognition of folic acid in binding assays.
Journal of Applied Polymer Science, 133, (21), ArticleNo43463-(2016)
   

kinetics

Gündogdu N et al., Kinetic study for adsorption of α-naphtholphthalein onto silica gel surface-imprinted polymer and non-imprinted polymer.
Journal of Macromolecular Science, Part A, 53, (12), 734-740, (2016)
   

kinetics

Ho YS, Comments on the paper ’Synthesis and application of ion-imprinted resin based on modified melamine-thiourea for selective removal of Hg(II)’.
Polymer International, 65, (7), 845-846, (2016)
   

kinetics

Jing YJ et al., Pb(II)-imprinted chitosan beads to enhance the adsorption property and selectivity: characterization, kinetics, and thermodynamics.
Desalination and Water Treatment, 57, (32), 15073-15082, (2016)
   

kinetics

Wang N et al., Preparation of molecularly imprinted polymer for methylene blue and study on its molecular recognition mechanism.
Colloid & Polymer Science, 294, (8), 1305-1314, (2016)
   

kinetics

Asman S et al., Influence of polymer morphology on the adsorption behaviors of molecularly imprinted polymer-methacrylic acid functionalized β-cyclodextrin.
Journal of Applied Polymer Science, 132, (43), ArticleNo42720-(2015)
   

kinetics

Kyzas GZ et al., Nanoadsorbents for pollutants removal: A review.
Journal of Molecular Liquids, 203, 159-168, (2015)
   

kinetics

Liu J et al., Preparation and characterization of erythromycin molecularly imprinted polymers based on distillation-precipitation polymerization.
Journal of Separation Science, 38, (17), 3103-3109, (2015)
   

kinetics

Yang LF et al., Molecularly imprinted polymers for the selective recognition of l-phenylalanine based on 1-buty-3-methylimidazolium ionic liquid.
Journal of Applied Polymer Science, 132, (36), ArticleNo42485-(2015)
   

kinetics

Zhang ZL et al., Synthesis and characterization of whisker surface imprinted polymer and selective solid-phase extraction of trace Sr(II) from environment aqueous solution.
Desalination and Water Treatment, 54, (9), 2441-2451, (2015)
   

kinetics

Cao Y et al., Surface molecularly imprinted polymer prepared by reverse atom transfer radical polymerization for selective adsorption indole.
Journal of Applied Polymer Science, 131, (13), Article No 40473-(2014)
   

kinetics

Germiniano TO et al., Synthesis of novel copper ion-selective material based on hierarchically imprinted cross-linked poly(acrylamide-co-ethylene glycol dimethacrylate).
Reactive and Functional Polymers, 82, 72-80, (2014)
   

kinetics

Liu XL et al., Surface Molecular Imprinting Modified TiO2 Photocatalyst for Adsorption and Photocatalytic Degradation of Salicylic Acid.
Fresenius Environmental Bulletin, 23, (7A), 1626-1634, (2014)
   

kinetics

Surikumaran H et al., Molecular Imprinted Polymer of Methacrylic Acid Functionalised β-Cyclodextrin for Selective Removal of 2,4-Dichlorophenol.
International Journal of Molecular Sciences, 15, (4), 6111-6136, (2014)
   

kinetics

Wang J et al., Surface molecularly imprinted polymers based on yeast prepared by atom transfer radical emulsion polymerization for selective recognition of ciprofloxacin from aqueous medium.
Journal of Applied Polymer Science, 131, (11), Article No 40310-(2014)
   

kinetics

Guan WS et al., Selective recognition of beta-cypermethrin by molecularly imprinted polymers based on magnetite yeast composites.
Journal of Applied Polymer Science, 129, (4), 1952-1958, (2013)
   

kinetics

Proceeding, Pang M et al, Solid Phase Extraction of Trace Cobalt(II) from Aqueous Solutions through Physicochemical Adsorption by Surface Ion-Imprinted Polymer, 
In: Advanced Materials Research, Zhao J, Iranpour R, Li XY, Jin B (Eds.), 
700-706, (2013)
   

kinetics

Zhao LL et al., Selective binding of an imprinted polymer resulted from controlling cobalt coordination to nitric oxide.
Journal of Applied Polymer Science, 127, (3), 2160-2168, (2013)
   

kinetics

Castro-López MdM et al., Preparation, evaluation and characterization of quercetin-molecularly imprinted polymer for preconcentration and clean-up of catechins.
Analytica Chimica Acta, 721, (1), 68-78, (2012)
   

kinetics

Chaput L et al., Enhancing the enantioselectivity of CALB by substrate imprinting: A combined experimental and molecular dynamics simulation model study.
Journal of Molecular Catalysis B: Enzymatic, 84, 55-61, (2012)
   

kinetics

Speight RE et al., A Survey of the 2010 Quartz Crystal Microbalance Literature.
Journal of Molecular Recognition, 25, (9), 451-473, (2012)
   

kinetics

Cela-Pérez MC et al., Synthesis and characterization of bisphenol-A imprinted polymer as a selective recognition receptor.
Analytica Chimica Acta, 706, (2), 275-284, (2011)
   

kinetics

Chen CY et al., Biosorption of Cu(II), Zn(II), Ni(II) and Pb(II) ions by cross-linked metal-imprinted chitosans with epichlorohydrin.
Journal of Environmental Management, 92, (3), 796-802, (2011)
   

kinetics

Hong Y et al., Kinetics of adsorption of Zn2+ on imprinted chitosan polymer.
Chemical Industry and Engineering Progress, 30, (6), 1296-1301, (2011)
   

kinetics

Servant A et al., Tuning Molecular Recognition in Water-Soluble Nanogels with Enzyme-Like Activity for the Kemp Elimination.
Chemistry - A European Journal, 17, (39), 11052-11059, (2011)
   

kinetics

Farhadi K et al., Removal of malachite green from aqueous solutions using molecularly imprinted polymer.
Desalination and Water Treatment, 24, (1-3), 20-27, (2010)
   

kinetics

Pan JM et al., Selective Adsorption of Co(II) Ions by Whisker Surface Ion-Imprinted Polymer: Equilibrium and Kinetics Modeling.
Chinese Journal of Chemistry, 28, (12), 2483-2488, (2010)
   

kinetics

Kyzas GZ et al., Selective separation of basic and reactive dyes by molecularly imprinted polymers (MIPs).
Chemical Engineering Journal, 149, (1-3), 263-272, (2009)
   

kinetics

Li SJ et al., Selective Adsorption and Molecular Recognition by a Molecularly Imprinted Polymer: Kinetic Study and Analysis.
Journal of the Chinese Chemical Society, 55, (1), 121-128, (2008)
   

kinetics

Li SJ et al., Molecularly imprinted polymers: Thermodynamic and kinetic considerations on the specific sorption and molecular recognition.
Sensors, 8, (4), 2854-2864, (2008)
   

kinetics

Cooper MA et al., A survey of the 2001 to 2005 quartz crystal microbalance biosensor literature: applications of acoustic physics to the analysis of biomolecular interactions.
Journal of Molecular Recognition, 20, (3), 154-184, (2007)
   

kinetics

Fang CL et al., Thermodynamic and Kinetic Considerations on the Specific Adsorption and Molecular Recognition by Molecularly Imprinted Polymer.
Journal of Inorganic and Organometallic Polymers and Materials, 17, (4), 623-629, (2007)
   

kinetics

Li WK et al., A kinetic consideration on the selective adsorption and molecular recognition by molecularly imprinted polymer.
Bulletin of the Korean Chemical Society, 28, (8), 1346-1352, (2007)
   

kinetics

Peng SW et al., Study on Adsorbing Properties and Kinetics of Co~(2+) Imprinting Chitosan Chelated Resins.
Guangzhou Chemical Industry, 34, (6), 1-3, (2006)
   

kinetic studies

Sid Kalal H et al., The Pre-concentration and determination of Iridium and Palladium in environmental water by imprinted polymer-based method.
International Journal of Environmental Science and Technology, 10, (5), 1091-1102, (2013)
   

kinetic studies

Manoochehri M et al., Synthesis and Evaluation of Ion Imprinted Mercapto-Functionalized Nano Alumina as a Selective Sorbent for Nd(III) Removal from Water Samples.
World Applied Sciences Journal, 19, (2), 215-222, (2012)
   

kinetic study

Hassan S et al., Synthesis and Characterization of Molecularly Imprinted Nanoparticle Polymers for Selective Separation of Anthracene.
Journal of Dispersion Science and Technology, 37, (9), 1241-1251, (2016)
   

Kinetic theory

Proceeding, Yang S et al, Preparation and characterization of molecularly imprinted mesoporous organosilica for biphenol Z recognition and separation, 

970-975, (2015)
   

K+ ion

Rajabi HR et al., Preparation of a novel potassium ion imprinted polymeric nanoparticles based on dicyclohexyl 18C6 for selective determination of K+ ion in different water samples.
Materials Science and Engineering: C, 33, (6), 3374-3381, (2013)
   

Kirenol

Chen FF et al., Molecularly imprinted polymer for the specific solid-phase extraction of kirenol from Siegesbeckia pubescens herbal extract.
Talanta, 89, (1), 505-512, (2012)
   

Kiwi fruit root

Yang X et al., Novel molecularly imprinted polymers with carbon nanotube as matrix for selective solid-phase extraction of emodin from kiwi fruit root.
Food Chemistry, 145, 687-693, (2014)
   

Klarite

Kamra T et al., Photoconjugation of Molecularly Imprinted Polymer Nanoparticles for Surface-Enhanced Raman Detection of Propranolol.
ACS Applied Materials & Interfaces, 7, (49), 27479-27485, (2015)
   

knockout

Li H et al., A novel molecularly imprinted method with computational simulation for the affinity isolation and knockout of baicalein from Scutellaria baicalensis.
Biomedical Chromatography, 30, (2), 117-125, (2016)
   

Kojic acid

Wang Y et al., Development of a sensitive and selective kojic acid sensor based on molecularly imprinted polymer modified electrode in the lab-on-valve system.
Talanta, 85, (5), 2522-2527, (2011)
   

Konjac glucomannan

Tian DT et al., Synthesis and Properties of Caffeine Molecularly Imprinted Polymers Based on Konjac Glucomannan.
Advances in Polymer Technology, 36, (1), 68-76, (2017)
   

Konjac glucomannan

Proceeding, Mi ZY et al, Preparation and Characterize of Konjac Glucomannan-Based Protein Molecularly Imprinted Polymer, 
In: Advanced Materials Research, Zhang H, Jin D (Eds.), 
460-463, (2012)
   

Konjac glucomannan

Proceeding, Mi ZY et al, Recognition of Papain by Konjac Glucomannan-Based Molecularly Imprinted Membrane, 
In: Advanced Materials Research, Zhang H, Jin D (Eds.), 
687-690, (2011)
   

kukoamine A

Piletska EV et al., Application of a Molecularly Imprinted Polymer for the Extraction of Kukoamine A from Potato Peels.
Journal of Agricultural and Food Chemistry, 60, (1), 95-99, (2012)
   

top

 



Molecules Special Issue call     Sensors Special Issue call






Join the Society for Molecular Imprinting
Logo of the Society for Molecular Imprinting

New items RSS feed
new items RSS feed  View latest updates

Sign-up for e-mail updates:
Choose between receiving an occasional newsletter or more frequent e-mail alerts.
Click here to go to the sign-up page.


Is your name elemental or peptidic? Enter your name and find out by clicking either of the buttons below!
Other products you may like:
view listings for MIP books on eBay:
UK listings   US listings

Searching for Molecular Imprinting books on Amazon.co.uk:
Molecular Imprinting
Imprinted Polymers
Polymer Chemistry
Organic Chemistry
Biosensors

Lab supplies and Glassware