Alternatively for mipdatabase quick searches go here

Custom Search

Abstract: Surface imprinting is an effective and simple method to fabricate and retain imprinted templates and recognizable nanocavities after template extraction. The imprinted effects can be controlled depending on the surface morphological changes. In general, a planar film has a limited area compared to a structured film with relatively higher surface-to-volume (S/V) ratio (A/A0), leading to the conventional sensing response upon the functionality of monomers in a fixed chemical composition. To increase the limited sensing properties and develop simple fabrication of porous arrays on a large area, we herein demonstrate the 2,4-dichlorophenoxyacetic acid (2,4-D, herbicide)-imprinted porous thin film lithographically patterned using photopolymerization and silica colloidal array as a master mold, derived by a unidirectional rubbing method. The resonant frequency changes with respect to the adsorption of 2,4-D molecules on a template-extracted porous poly(MAA-co-EGDMA) (MIP) film in a 10-1 mM aqueous solution of 2,4-D for 1 h, and when compared to the planar MIP film, the higher sensing response (Δ f = -283 ± 7 Hz &8776; 1543 ± 38 ng/cm2) appears on the porous MIP film due to the specific recognition toward the more accessible templated cavities of the structured porous array, indicating an imprinting effect (If) value of 3.5. In addition, a higher selectivity for 2,4-D was also displayed on the porous MIP film compared to other herbicides. From these results, it was revealed that these improved sensing properties can be determined from the effects of various parameters (template functionality, film structuring, hydroxyl groups of silica colloids, etc.)
Template and target information: 2,4-Dichlorophenoxyacetic Acid, 2,4-D
Author keywords: molecular imprinting, photopolymerization, Colloidal lithography, colloidal silica, herbicide