This file last updated: 13/12/2021

Ya DM

Mo GC et al., A novel ECL sensor based on a boronate affinity molecular imprinting technique and functionalized SiO2@CQDs/AuNPs/MPBA nanocomposites for sensitive determination of alpha-fetoprotein.
Biosensors and Bioelectronics, 126, 558-564, (2019)
   

Ya Y

Wang YY et al., Investigation on Electrochemical Preparation of Methyl Parathion Imprinted Film Modified Electrode and Its Application.
Journal of Xingyang Normal University (Natural Science), 23, (4), 566-570, (2010)
   

Yaakoubi N

Ktari N et al., Design of a polypyrrole MIP-SAW sensor for selective detection of flumequine in aqueous media. Correlation between experimental results and DFT calculations.
RSC Advances, 5, (108), 88666-88674, (2015)
   

Ktari N et al., Surface Acoustic Wave Sensor for Selective Detection of Flumequine.
Procedia Engineering, 120, 998-1002, (2015)
   

Mazouz Z et al., Highly Selective Polypyrrole MIP-Based Gravimetric and Electrochemical Sensors for Picomolar Detection of Glyphosate.
Sensors, 17, (11), ArticleNo2586-(2017)
   

Mazouz Z et al., Design of Novel Electrochemical Sensors for the Selective Detection of Glyphosate.
Proceedings, 1, (4), ArticleNo483-(2017)
   

Achour B et al., Proceeding, Ultrasensitive Ion Imprinted Polypyrole Polymer Based Piezoelectric Sensors for Selective Detection of Lead Ions, 
1-4, (2018)
   

Ait-Touchente Z et al., Zinc Oxide Nanorods Wrapped with Ion-Imprinted Polypyrrole Polymer for Picomolar Selective and Electrochemical Detection of Mercury II Ions.
Proceedings, 2, (13), Article1004-(2018)
   

Aloui N et al., Novel Approach for Modeling an Ionic Imprinted Polymer Based SAW Sensor with COMSOL Multiphysics.
Proceedings, 2, (13), ArticleNo975-(2018)
   

Yabe MJS

Germiniano TO et al., Synthesis of novel copper ion-selective material based on hierarchically imprinted cross-linked poly(acrylamide-co-ethylene glycol dimethacrylate).
Reactive and Functional Polymers, 82, 72-80, (2014)
   

Yacob AR

Zinalibdin MR et al., A Novel Molecularly Imprinted Acrylonitrile-butadiene-styrene Membrane for Adsorption of Hippuric acid.
Procedia Chemistry, 16, 91-98, (2015)
   

Yadav S

Pundir CS et al., Creatinine sensors.
TrAC Trends in Analytical Chemistry, 50, 42-52, (2013)
   

Yadav SK

Yadav SK et al., A review on determination of steroids in biological samples exploiting nanobio-electroanalytical methods.
Analytica Chimica Acta, 762, 14-24, (2013)
   

Yadavalli G

Li K et al., Selective Adsorption of Gd3+ on a Magnetically Retrievable Imprinted Chitosan/Carbon Nanotube Composite with High Capacity.
ACS Applied Materials & Interfaces, 7, (38), 21047-21055, (2015)
   

Yadegari H

Yazdani Z et al., A molecularly imprinted electrochemical nanobiosensor for prostate specific antigen determination.
Analytical Biochemistry, 566, 116-125, (2019)
   

Yadnum S

Wattanakit C et al., Enantioselective recognition at mesoporous chiral metal surfaces.
Nature Communications, 5, Article No 4325-(2014)
   

Yaftian MR

Mostafavi M et al., A new diclofenac molecularly imprinted electrochemical sensor based upon a polyaniline/reduced graphene oxide nano-composite.
Biosensors and Bioelectronics, 122, 160-167, (2018)
   

Piri S et al., Imprinted Azorubine electrochemical sensor based upon composition of MnO2 and 1-naphthylamine on graphite nanopowder.
Journal of the Iranian Chemical Society, 15, (12), 2713-2720, (2018)
   

Saadati F et al., Synthesis and characterization of nanostructure molecularly imprinted polyaniline/graphene oxide composite as highly selective electrochemical sensor for detection of p-nitrophenol.
Journal of the Taiwan Institute of Chemical Engineers, 86, 213-221, (2018)
   

Yagci Y

Salmi Z et al., Preparation of MIP grafts for quercetin by tandem aryl diazonium surface chemistry and photopolymerization.
Microchimica Acta, 180, (15-16), 1411-1419, (2013)
   

Bakas I et al., Molecularly imprinted polymeric sensings layers grafted from aryl diazonium-modified surfaces for electroanalytical applications. A mini review.
Surface And Interface Analysis, 46, (10-11), 1014-1020, (2014)
   

Bakas I et al., Picomolar Detection of Melamine Using Molecularly Imprinted Polymer-Based Electrochemical Sensors Prepared by UV-Graft Photopolymerization.
Electroanalysis, 27, (2), 429-439, (2015)
   

Msaadi R et al., Diazonium-based ion-imprinted polymer/clay nanocomposite for the selective extraction of lead (II) ions in aqueous media.
European Polymer Journal, 89, 367-380, (2017)
   

Msaadi R et al., Highly Selective Copper Ion Imprinted Clay/Polymer Nanocomposites Prepared by Visible Light Initiated Radical Photopolymerization.
Polymers, 11, (2), ArticleNo286-(2019)
   

Yagi SS

Zhou Q et al., Extended gate-type organic transistor functionalized by molecularly imprinted polymer for taurine detection.
Nanoscale, 13, (1), 100-107, (2021)
   

Yagisawa Y

Yoshimi Y et al., Blood heparin sensor made from a paste electrode of graphite particles grafted with molecularly imprinted polymer.
Sensors and Actuators B: Chemical, 259, 455-462, (2018)
   

Yoshimi Y et al., Corrigendum to "Blood heparin sensor made from a paste electrode of graphite particles grafted with molecularly imprinted polymer" [Sens. Actuators B: Chem. 259 (2018) 455-462].
Sensors and Actuators B: Chemical, 333, Article129588-(2021)
   

Yagishita M

Yagishita M et al., Efficient extraction of estrogen receptor-active compounds from environmental surface water via a receptor-mimic adsorbent, a hydrophilic PEG-based molecularly imprinted polymer.
Chemosphere, 217, 204-212, (2019)
   

Yago ACC

Pernites RB et al., Nanostructured, Molecularly Imprinted, and Template-Patterned Polythiophenes for Chiral Sensing and Differentiation.
Small, 8, (11), 1669-1674, (2012)
   

Yahaya N

Rozaini MNH et al., Rapid ultrasound assisted emulsification micro-solid phase extraction based on molecularly imprinted polymer for HPLC-DAD determination of bisphenol A in aqueous matrices.
Talanta, 171, 242-249, (2017)
   

Khoo WC et al., Synthesis and characterization of graphene oxide-molecularly imprinted polymer for Neopterin adsorption study.
Journal of Polymer Research, 26, (8), 184-(2019)
   

Rozaini MNH et al., Molecularly imprinted silica gel incorporated with agarose polymer matrix as mixed matrix membrane for separation and preconcentration of sulfonamide antibiotics in water samples.
Talanta, 199, 522-531, (2019)
   

Husin NA et al., Application of a new choline-imidazole based deep eutectic solvents in hybrid magnetic molecularly imprinted polymer for efficient and selective removal of naproxen from aqueous samples.
Materials Chemistry and Physics, 261, Article124228-(2021)
   

Yahyazadeh F

Hashemi-Moghaddam H et al., Synthesis a new adsorbent of molecularly imprinted polymer for absorb the silver ions from biological sample.
E3S Web of Conferences, 1, Art. No. 39001-(2013)
   

Hashemi-Moghaddam H et al., Synthesis of a New Molecularly Imprinted Polymer for Sorption of the Silver Ions from Geological and Antiseptic Samples for Determination by Flame Atomic Absorption Spectrometry.
Journal of AOAC International, 97, (5), 1434-1438, (2014)
   

Yakabe H

Deore B et al., Enantioselective uptake of amino acids using an electromodulated column packed with carbon fibres modified with overoxidised polypyrrole.
Analyst, 127, (7), 935-939, (2002)
   

Okuno H et al., Characterization of overoxidized polypyrrole colloids imprinted with L-lactate and their application to enantioseparation of amino acids.
Analytical Chemistry, 74, (16), 4184-4190, (2002)
   

Shiigi H et al., Highly selective molecularly imprinted overoxidized polypyrrole colloids: One-step preparation technique.
Analytical Sciences, 18, (1), 41-44, (2002)
   

Shiigi H et al., Molecularly imprinted overoxidized polypyrrole colloids: Promising materials for molecular recognition.
Microchimica Acta, 143, (2-3), 155-162, (2003)
   

Yakhkind MI

Yakhkind MI et al., Molecular imprinted polymers for macrolides, aminoglycosides and some other biosynthetic antibiotics.
Antibiotiki i Khimioterapiya, 59, (7-8), 37-40, (2014)
   

Yakhkind MI et al., Molecularly imprinted polymers: possible use for isolation of biosynthetic antibiotics.
Russian Chemical Bulletin, 63, (5), 1049-1056, (2014)
   

Yakimanskii AV

Men’shikova AYu et al., Sorption of vapors of aromatic compounds by cross-linked polymer particles containing luminophores: A spectroscopic study.
Russian Journal of Applied Chemistry, 83, (11), 1997-2005, (2010)
   

Men’shikova AYu et al., Crosslinked monodisperse particles containing luminophore groups in shells for molecular recognition of lower alcohols (Original Russian Text © A.Yu. Men'shikova, N.N. Shevchenko, T.G. Evseeva, A.V. Koshkin, G.A. Pankova, B.M. Shabsel's, V.V. Faraonova, M.Ya. Goikhman, A.V. Yakimanskii, V.A. Sazhnikov, M.V. Alfimov, 2012, published in Russian in Vysokomolekulyarnye Soedineniya, Ser. B, 2012, Vol. 54, No. 1, pp. 93 - 101.).
Polymer Science Series B, 54, (1), 21-29, (2012)
   

Yakovleva M

Yakovleva M et al., The enzyme thermistor - A realistic biosensor concept. A critical review.
Analytica Chimica Acta, 766, 1-12, (2013)
   

Yakup B

Muhammad K et al., Screening the Best Functional Monomer for Preparation of Molecularly Imprinted Polymer of 4-Nitrophenol and Application on Solid Phase Extraction of Water Sample.
Chinese Journal of Applied Chemistry, 31, (4), 482-488, (2014)
   

Chang JH et al., A Simple and Selective Fluorescent Sensor Chip for Indole-3-Butyric Acid in Mung Bean Sprouts Based on Molecularly Imprinted Polymer Coatings.
Sensors, 17, (9), ArticleNo1954-(2017)
   

Chen L et al., New immobilisation protocol for the template used in solid-phase synthesis of MIP nanoparticles.
Applied Surface Science, 406, 115-121, (2017)
   

Yakura Y

Hwang KO et al., Template-assisted assembly of metal binding sites on a silica surface.
Materials Science & Engineering C-Biomimetic Materials Sensors And Systems, 3, (2), 137-141, (1995)
   

Yalcin MS

Battal D et al., Molecularly imprinted polymer based quartz crystal microbalance sensor system for sensitive and label-free detection of synthetic cannabinoids in urine.
Biosensors and Bioelectronics, 111, 10-17, (2018)
   

Akgönüllü S et al., Rapid and sensitive detection of synthetic cannabinoids JWH-018, JWH-073 and their metabolites using molecularly imprinted polymer-coated QCM nanosensor in artificial saliva.
Microchemical Journal, 153, Article104454-(2020)
   

Yalinca Z

Yalinca Z et al., Evaluation of chitosan tripolyphosphate gel beads as bioadsorbents for iron in aqueous solution and in human blood in vitro.
Journal of Applied Polymer Science, 125, (2), 1493-1505, (2012)
   

Yamada K

Nagahori N et al., Synthetic studies on specific glyco-ligands by molecular imprinting method.
Abstracts of Papers of the American Chemical Society, 215, (CARB), 043-043, (1998)
   

Yamamoto C et al., Preparation of HPLC chiral packing materials using cellulose tris(4-methylbenzoate) for the separation of chrysanthemate isomers.
Journal of Polymer Science Part A: Polymer Chemistry, 44, (17), 5087-5097, (2006)
   

Yamada M

Shinkai S et al., Template synthesis from starch as an approach to tailor-made cyclodextrin.
Tetrahedron Letters, 24, (33), 3501-3504, (1983)
   

Lin JM et al., Recent advances in the preparation and use of molecularly imprinted polymers for molecular recognition.
Memoirs of the Graduate School of Engineering, Tokyo Metropolitan University, 47, 5603-5614, (1998)
   

Lin JM et al., Chemiluminescent reaction of fluorescent organic compounds with KHSO5 using cobalt(II) as catalyst and its first application to molecular imprinting.
Analytical Chemistry, 72, (6), 1148-1155, (2000)
   

Lin JM et al., Chemiluminescent flow-through sensor for 1, 10-phenanthroline based on the combination of molecular imprinting and chemiluminescence.
Analyst, 126, (6), 810-815, (2001)
   

Yamada S

Hayashi K et al., Cellulose-based molecularly imprinted red-blood-cell-like microparticles for the selective capture of cortisol.
Carbohydrate Polymers, 193, 173-178, (2018)
   

Yamada T

Matsui J et al., Molecular Imprinting under Molecular Crowding Conditions: An Aid to the Synthesis of a High-Capacity Polymeric Sorbent for Triazine Herbicides.
Analytical Chemistry, 79, (4), 1749-1757, (2007)
   

Matsui J et al., Face-to-face porphyrin moieties assembled with spacing for pyrazine recognition in molecularly imprinted polymers.
Biosensors and Bioelectronics, 25, (3), 635-639, (2009)
   

Ikawa T et al., Virus-Templated Photoimprint on the Surface of an Azobenzene-Containing Polymer.
Langmuir, 26, (15), 12673-12679, (2010)
   

Takeuchi T et al., Molecularly Imprinted Nanogels Acquire Stealth In Situ by Cloaking Themselves with Native Dysopsonic Proteins.
Angewandte Chemie International Edition, 56, (25), 7088-7092, (2017)
   

Yoshida A et al., Gold Nanoparticle-Incorporated Molecularly Imprinted Microgels as Radiation Sensitizers in Pancreatic Cancer.
ACS Applied Bio Materials, 2, (3), 1177-1183, (2019)
   

Yamagishi T

Nakayama T et al., Proceeding, Star shaped molecularly imprinted polymer working as a drug carrier, 
(2006)
   

Yamaguchi R

Yoshimi Y et al., Blood heparin sensor made from a paste electrode of graphite particles grafted with molecularly imprinted polymer.
Sensors and Actuators B: Chemical, 259, 455-462, (2018)
   

Yoshimi Y et al., Corrigendum to "Blood heparin sensor made from a paste electrode of graphite particles grafted with molecularly imprinted polymer" [Sens. Actuators B: Chem. 259 (2018) 455-462].
Sensors and Actuators B: Chemical, 333, Article129588-(2021)
   

Yamaguchi T

Basavaraja C et al., Dependence of molecular recognition for a specific cation on the change of the oxidation state of the metal catalyst component in the hydrogel network.
Bulletin of the Korean Chemical Society, 28, (5), 805-810, (2007)
   

Yamakita S

Katada N et al., Book chapter, Molecular sieving overlayer prepared by chemical vapor deposition of silica using molecule as template on metal oxide surface, 
In: Recent Advances In The Science And Technology Of Zeolites And Related Materials, Parts A -C, van Steen E, Callanan H, Claeys M (Eds.) Elsevier: Amsterdam, 710-716, (2004)
   

Katada N et al., Formation of selective adsorption cavity by chemical vapor deposition of molecular sieving silica overlayer on alumina using molecular template in the presence of acetic acid.
Bulletin of the Chemical Society of Japan, 78, (6), 1001-1007, (2005)
   

Yamakita S et al., Shape-selective adsorption of substituted benzaldehyde isomers by a molecular sieving silica overlayer prepared by the chemical vapor deposition method using organic template on tin oxide.
Bulletin of the Chemical Society of Japan, 78, (8), 1425-1430, (2005)
   

Yamamizu T

Takeda K et al., Shape-memory pore structure in porous crosslinked polystyrenes.
Angewandte Makromolekulare Chemie, 157, 123-136, (1988)
   

Yamamoto C

Kamiya Y et al., Proceeding, Optical resolution of chrysanthemic acid derivatives on cellulose and amylose columns, 
1513, (2002)
   

Yamamoto C et al., Preparation of HPLC chiral packing materials using cellulose tris(4-methylbenzoate) for the separation of chrysanthemate isomers.
Journal of Polymer Science Part A: Polymer Chemistry, 44, (17), 5087-5097, (2006)
   

Yamamoto KI

Murakami S et al., A molecularly imprinted polymer for the reconstruction of a molecular recognition region.
Chemistry Letters, 37, (10), 1028-1029, (2008)
   

Yamamoto N

Morihara K et al., Footprint catalysis .3. Inducible alteration of substrate specificities of silica(alumina) gel catalysts for 2, 4-dinitrophenolysis of toluic anhydrides by footprint imprinting.
Bulletin of the Chemical Society of Japan, 62, (2), 499-505, (1989)
   

Yamamoto T

Yamamoto T et al., The Effects of Cyclodextrins on the Conformation of Proteins.
Current Organic Chemistry, 15, (6), 831-838, (2011)
   

Yamamoto Y

Shiigi H et al., Placement of Nanospace on an Electrode for Biosensing.
Analytical Sciences, 28, (11), 1037-1048, (2012)
   

Shan XL et al., Spontaneous and specific binding of enterohemorrhagic Escherichia coli to overoxidized polypyrrole-coated microspheres.
Chemical Communications, 53, (27), 3890-3893, (2017)
   

Shan XL et al., A rapid and specific bacterial detection method based on cell-imprinted microplates.
Analyst, 143, (7), 1568-1574, (2018)
   

Yamamura I

Fujiwara M et al., A sol-gel method using acetic anhydride in the presence of cholesterol in organic solution media: Preparation of silicas that recognize steroid hormones.
Analytical Chemistry, 76, (8), 2374-2381, (2004)
   

Fujiwara M et al., Bisphenol A imprinted SiO2-ZrO2 mixed oxide materials prepared by acetic anhydride sol-gel method.
Synthesis and Reactivity in Inorganic, Metal-Organic and Nano-Metal Chemistry, 37, (10), 771-777, (2007)
   

Yamamura K

Tabushi I et al., Supramolecular sensor based on SnO2 electrode modified with octadecylsilyl monolayer having molecular-binding sites.
Tetrahedron Letters, 28, (37), 4299-4302, (1987)
   

Yamamura K et al., Recognition-adsorption of artificial liposomes onto glass-surface modified with octadecylsilyl monolayer.
Chemistry Letters, 17, (1), 99-102, (1988)
   

Yamamura K et al., Guest selective molecular recognition by an octadecylsilyl monolayer covalently bound on an SnO2 electrode.
Journal of the Chemical Society-Chemical Communications, (2), 79-81, (1988)
   

Yaman M

Bicim T et al., Sensitivity Enhancement in Uranium Determination by UV-Visible Spectroscopy Using Ion Imprinted Polymer.
Spectroscopy and Spectral Analysis, 36, (6), 1992-1997, (2016)
   

Bicim T et al., Sensitive Determination of Uranium in Natural Waters Using UV-Vis Spectrometry After Preconcentration by Ion-Imprinted Polymer-Ternary Complexes.
Journal of AOAC International, 99, (4), 1043-1048, (2016)
   

Yaman YT

Bolat G et al., Molecularly imprinted electrochemical impedance sensor for sensitive dibutyl phthalate (DBP) determination.
Sensors and Actuators B: Chemical, 299, Article127000-(2019)
   

Yücebas BB et al., Molecular imprinted polymer based electrochemical sensor for selective detection of paraben.
Sensors and Actuators B: Chemical, 305, Article127368-(2020)
   

Yaman YT et al., Molecularly imprinted label-free sensor platform for impedimetric detection of 3-monochloropropane-1, 2-diol.
Sensors and Actuators B: Chemical, 328, Article128986-(2021)
   

Yamanaka H

Mascini M et al., Book chapter, Multiple Minima Hypersurfaces Procedures for Biomimetic Ligands Screening, 
In: Sensors and Microsystems, Neri G, Donato N, D'Amico A, Di Natale C (Eds.) Springer Netherlands: Ch. 65, 403-407, (2011)
   

Pedroso MM et al., Electrochemical sensor for dodecyl gallate determination based on electropolymerized molecularly imprinted polymer.
Sensors and Actuators B: Chemical, 253, 180-186, (2017)
   

Yamani HZ

Kamel AH et al., Assessment of pesticides in environmental samples using voltammetric molecular imprinted based sensors: A review.
European Chemical Bulletin, 5, (2), 69-76, (2016)
   

Yamashita K

Kondo F et al., Proceeding, Molecular design of hydrogel catalyst for hydrolysis -Attempt to molecular imprinting in water-, 
1429, (2002)
   

Yamashita K et al., Proceeding, Dependence of gel structure on the molecular recognition ability of stimuli-responsive imprinting hydrogel, 
1843, (2002)
   

Yamashita K et al., Proceeding, Preparation of imprinting hydrogel adsorbents, 
1842, (2002)
   

Yamashita K et al., Proceeding, Attempts to imprinting of hydrogel in aqueous system, 
684, (2002)
   

Yamashita K et al., Two-step imprinting procedure of inter-penetrating polymer network-type stimuli-responsive hydrogel-adsorbents.
Polymer Journal, 35, (7), 545-550, (2003)
   

Ohkouchi H et al., Molecular design of a functionalized photosensitive hydrogel.
Polymer Preprints, Japan, 54, (1), 1783-(2005)
   

Yamashita S

Iwata K et al., Preparation of Fluorescent Molecularly Imprinted Polymer Micropowder for Odorant Visualization.
Sensors and Materials, 28, (3), 173-179, (2016)
   

Yamauchi H

Kawanami Y et al., Imprinted polymer catalysts for the hydrolysis of p-nitrophenyl acetate.
Journal of Molecular Catalysis A: Chemical, 145, (1-2), 107-110, (1999)
   

Yamauchi T

Inoue K et al., Ionic Conductivity of Cross-linked Polymethacrylate Derivatives/Cyclophosphazenes/Li+ Salt Complexes.
Journal of Inorganic and Organometallic Polymers and Materials, 17, (2), 367-375, (2007)
   

Shan XL et al., Spontaneous and specific binding of enterohemorrhagic Escherichia coli to overoxidized polypyrrole-coated microspheres.
Chemical Communications, 53, (27), 3890-3893, (2017)
   

Shan XL et al., Binding Constant of the Cell-shaped Cavity Formed on a Polymer for Escherichia coli O157.
Analytical Sciences, 34, (4), 483-486, (2018)
   

Shan XL et al., A rapid and specific bacterial detection method based on cell-imprinted microplates.
Analyst, 143, (7), 1568-1574, (2018)
   

Yamazaki T

Yamazaki T et al., Alteration of substrate specificity of galactose oxidase by chemical cross-linking.
Denki Kagaku, 65, 435-439, (1997)
   

Sode K et al., A new concept for the construction of an artificial dehydrogenase for fructosylamine compounds and its application for an amperometric fructosylamine sensor.
Analytica Chimica Acta, 435, (1), 151-156, (2001)
   

Yamazaki T et al., A novel amperometric sensor for organophosphotriester insecticides detection employing catalytic polymer mimicking phosphotriesterase catalytic center.
Electrochemistry, 69, (12), 969-972, (2001)
   

Yamazaki T et al., Towards the use of molecularly imprinted polymers containing imidazoles and bivalent metal complexes for the detection and degradation of organophosphotriester pesticides.
Analytica Chimica Acta, 435, (1), 209-214, (2001)
   

Meng ZH et al., Enhancement of the catalytic activity of an artificial phosphotriesterase using a molecular imprinting technique.
Biotechnology Letters, 25, (13), 1075-1080, (2003)
   

Sode K et al., Construction of a molecular imprinting catalyst using target analogue template and its application for an amperometric fructosylamine sensor.
Biosensors and Bioelectronics, 18, (12), 1485-1490, (2003)
   

Yamazaki T et al., Molecular imprinting catalyst based artificial enzyme sensor for fructosylamines.
Analytical Letters, 36, (1), 75-89, (2003)
   

Meng ZH et al., A molecularly imprinted catalyst designed by a computational approach in catalysing a transesterification process.
Biosensors and Bioelectronics, 20, (6), 1068-1075, (2004)
   

Meng ZH et al., Construction of artificial cyclic amide amidohydrolases using molecular imprinting technique.
Biotechnology Letters, 27, (7), 471-475, (2005)
   

Yamazaki T et al., Molecular recognition of AGEs using molecularly imprinted polymer.
Nippon Kagakkai Koen Yokoshu, 86, (2), 944-(2006)
   

Yamazaki T et al., Operational condition of a molecular imprinting catalyst-based fructosyl-valine sensor.
Electrochemistry, 76, (8), 590-593, (2008)
   

Sode K et al., Molecular recognition of fructosyl amine compounds by molecularly imprinted polymers.
Nippon Kagakkai Koen Yokoshu, 79, (2), 840-(2011)
   

Yamazaki T, An Amperometric Sensor Based on Gold Electrode Modified by Soluble Molecularly Imprinted Catalyst for Fructosyl Valine.
Electrochemistry, 80, (5), 353-357, (2012)
   

Yoshimatsu K et al., Influence of template/functional monomer/cross-linking monomer ratio on particle size and binding properties of molecularly imprinted nanoparticles.
Journal of Applied Polymer Science, 124, (2), 1249-1255, (2012)
   

Yamini Y

Khajeh M et al., Imprinted polymer particles for selenium uptake: Synthesis, characterization and analytical applications.
Analytica Chimica Acta, 581, (2), 208-213, (2007)
   

Ebrahimzadeh H et al., Molecular-imprinted polymer extraction combined with dispersive liquid-liquid micro-extraction for ultra-preconcentration of mononitrotoluene.
Journal of Separation Science, 33, (23-24), 3759-3766, (2010)
   

Faraji M et al., Magnetic nanoparticles: Synthesis, stabilization, functionalization, characterization, and applications.
Journal of the Iranian Chemical Society, 7, (1), 1-37, (2010)
   

Ebrahimzadeh H et al., Optimization of Cu(II)-ion imprinted nanoparticles for trace monitoring of copper in water and fish samples using a Box-Behnken design.
Reactive and Functional Polymers, 73, (1), 23-29, (2013)
   

Seidi S et al., Electrochemically assisted solid based extraction techniques: A review.
Talanta, 132, 339-353, (2015)
   

Asiabi H et al., Preparation and evaluation of a novel molecularly imprinted polymer coating for selective extraction of indomethacin from biological samples by electrochemically controlled in-tube solid phase microextraction.
Analytica Chimica Acta, 913, 76-85, (2016)
   

Hassanpour S et al., Magnetic Cr(VI) Ion Imprinted Polymer for the Fast Selective Adsorption of Cr(VI) from Aqueous Solution.
Journal of Polymers and the Environment, 26, (1), 101-115, (2018)
   

Lashgari M et al., An overview of the most common lab-made coating materials in solid phase microextraction.
Talanta, 191, 283-306, (2019)
   

Yan AP

Xiong HH et al., Thermosensitive and magnetic molecularly imprinted polymers for selective recognition and extraction of aristolochic acid I.
Food Chemistry, 372, Article131250-(2022)
   

Yan B

Ma LC et al., Characterization and properties of Cu2+ ion-imprinted magnetic chitosan beads and their Cu2+ adsorption performance.
Journal of Chemical Engineering of Chinese Universities, 30, (1), 174-181, (2016)
   

Ma LC et al., Synthesis of Cu2+ ion-imprinted magnetic chitosan beads for selective recognition of Cu2+ ion in aqueous solution.
Chinese Journal of Rare Metals, 40, (6), 606-612, (2016)
   

Yan C

Deng QL et al., Investigation of molecularly imprinted monolithic capillary column with barbital as template for separation of barbital and its analogues by capillary electrochromatography.
Chinese Journal of Analysis Laboratory, 22, (Suppl 1), 113-115, (2003)
   

Yan WY et al., Capillary electrochromatographic separation of ionizable compounds with a molecular imprinted monolithic cationic exchange column.
Journal of Separation Science, 26, (6-7), 555-561, (2003)
   

Liu ZS et al., Preparation and characterization of molecularly imprinted monolithic column based on 4-hydroxybenzoic acid for the molecular recognition in capillary electrochromatography.
Analytica Chimica Acta, 523, (2), 243-250, (2004)
   

Liu ZS et al., Chiral separation of binaphthol enantiomers on molecularly imprinted polymer monolith by capillary electrochromatography.
Analytical Sciences, 20, (4), 673-678, (2004)
   

Liu ZS et al., Capillary electrochromatography of molecularly imprinted monolithic column using p-hydroxybenzoic acid as templates.
Chinese Chemical Letters, 15, (12), 1469-1472, (2004)
   

Yan C et al., Capillary electrochromatography: Advances in instrumentation and stationary phases.
Abstracts of Papers of the American Chemical Society, 227, (ANYL), 254-254, (2004)
   

Deng QL et al., Molecularly imprinted polymers as tools for the screening of felodipine from dihydropyridine calcium antagonists by pressurized capillary electrochromatography.
Analytical and Bioanalytical Chemistry, 382, (1), 51-58, (2005)
   

Deng QL et al., Preparation and evaluation of molecularly imprinted monolithic column for felodipine in micro-liquid chromatography.
Chinese Chemical Letters, 16, (7), 955-958, (2005)
   

Liu ZS et al., Mechanism of molecular recognition on molecular imprinted monolith by capillary electrochromatography.
Journal of Chromatography A, 1087, (1-2), 20-28, (2005)
   

Xu YL et al., Chiral recognition ability of an (S)-naproxen-imprinted monolith by capillary electrochromatography.
Electrophoresis, 26, (4-5), 804-811, (2005)
   

Lun ZH et al., Molecularly imprinted polymer monolithic column separation of isomers and analogues of vanillin by capillary electrochromatography.
Chinese Journal of Chemistry, 24, (3), 442-444, (2006)
   

Liang Z et al., Development of Molecularly Imprinted Monolithic Column for Capillary Electrochromatography.
Journal of Instrumental Analysis, 26, (5), 757-762, (2007)
   

Liu ZS et al., Molecularly imprinted polymers as a tool for separation in CEC.
Electrophoresis, 28, (1-2), 127-136, (2007)
   

Yan CL

Wu JM et al., Selective adsorption of copper ion by copper ion templated alginate gel.
Chinese Journal of Analytical Chemistry, 30, (12), 1414-1417, (2002)
   

Yan CL et al., Coating lysozyme molecularly imprinted thin films on the surface of microspheres in aqueous solutions.
Journal of Polymer Science Part A: Polymer Chemistry, 45, (10), 1911-1919, (2007)
   

Yan CL et al., Two-dimensional imprinting of protein molecules.
Progress In Chemistry, 20, (6), 969-974, (2008)
   

Lu Y et al., Preparation and recognition of surface molecularly imprinted core-shell microbeads for protein in aqueous solutions.
Applied Surface Science, 255, (12), 6061-6066, (2009)
   

Lu Y et al., Protein imprinting and recognition via forming nanofilms on microbeads surfaces in aqueous media.
Applied Surface Science, 256, (5), 1341-1346, (2009)
   

Yan CL et al., Selective Recognition of Ciprofloxacin Hydrochloride Based on Molecular Imprinted Sensor via Electrochemical Copolymerization of Pyrrole and o-phenylenediamine.
International Journal of Electrochemical Science, 11, 6466-6476-(2016)
   

Yan CL et al., A selective strategy for determination of ascorbic acid based on molecular imprinted copolymer of o-phenylenediamine and pyrrole.
Journal of Electroanalytical Chemistry, 780, 276-281, (2016)
   

Zhuo KL et al., Molecularly imprinted polymer based potentiometric sensor for the determination of 1-hexyl-3-methylimidazolium cation in aqueous solution.
Ionics, 22, (10), 1947-1955, (2016)
   

Liu J et al., Molecularly Imprinted Polymer Enables High-Efficiency Recognition and Trapping Lithium Polysulfides for Stable Lithium Sulfur Battery.
Nano Letters, 17, (8), 5064-5070, (2017)
   

Yan CL et al., Electrochemical determination of enrofloxacin based on molecularly imprinted polymer via one-step electro-copolymerization of pyrrole and o-phenylenediamine.
Journal of Electroanalytical Chemistry, 806, 130-135, (2017)
   

Yan CR

Xu YR et al., A novel controllable molecularly imprinted drug delivery system based on the photothermal effect of graphene oxide quantum dots.
Journal of Materials Science, 54, (12), 9124-9139, (2019)
   

Zhang N et al., Molecularly Imprinted Materials for Selective Biological Recognition.
Macromolecular Rapid Communications, 40, (17), Article1900096-(2019)
   

Yan CR et al., Drug-based magnetic imprinted nanoparticles: Enhanced lysozyme amyloid fibrils cleansing and anti-amyloid fibrils toxicity.
International Journal of Biological Macromolecules, 153, 723-735, (2020)
   

Yan CY

Cheng JL et al., Performance and application of the two types of molecularly imprinted polymers for melamine.
Chinese Journal of Health Laboratory Technology, 21, (1), 44-47, (2011)
   

Yu XN et al., Preparation of rare earth metal ion/TiO2Hal-conducting polymers by ions imprinting technique and its photodegradation property on tetracycline.
Applied Clay Science, 99, 125-130, (2014)
   

Zhou WC et al., Preparation and Performance of a Novel Magnetic Imprinted TiO2 Photocatalyst.
Nanoscience and Nanotechnology Letters, 7, (8), 678-684, (2015)
   

Yan D

Pan JM et al., Molecularly imprinted polymer foams with well-defined open-cell structure derived from Pickering HIPEs and their enhanced recognition of [lambda]-cyhalothrin.
Chemical Engineering Journal, 253, 138-147, (2014)
   

Rizvi AS et al., Development of Molecularly Imprinted 2D Photonic Crystal Hydrogel Sensor for Detection of L-Kynurenine in Human Serum.
Talanta, 208, Article120403-(2020)
   

Yan F

Shen N et al., Imprinted Human Serum Albumin with Antioxidant Activity.
Chemical Research in Chinese Universities, 27, (2), 258-263, (2011)
   

Yang QQ et al., Preparation of baicalein molecularly imprinted monolithic columns.
Chinese Journal of Pharmaceutical Analysis, 31, (1), 1-5, (2011)
   

Fan HT et al., Selective Removal of Arsenic(V) from Aqueous Solution Using A Surface-Ion-Imprinted Amine-Functionalized Silica Gel Sorbent.
Industrial & Engineering Chemistry Research, 51, (14), 5216-5223, (2012)
   

Fan HT et al., Preparation of Cd(II)-imprinted silica by hydrothermal-assisted surface imprinting technique and its adsorption properties.
Journal of Functional Materials, 43, (15), 2060-2064, (2012)
   

Guo MM et al., Preparation, characterization and adsorption properties of cadmium(II) ion imprinted silica gel sorbents.
Journal of Functional Materials, 44, (6), 800-804, (2013)
   

Fan HT et al., Ionic Imprinted Silica-Supported Hybrid Sorbent with an Anchored Chelating Schiff Base for Selective Removal of Cadmium(II) Ions from Aqueous Media.
Industrial & Engineering Chemistry Research, 53, (1), 369-378, (2014)
   

Su MX et al., Stereoselective adsorption utilizing l-phenylalanine imprinting chiral ordered mesoporous silica.
RSC Advances, 4, (98), 54998-55002, (2014)
   

Liu MX et al., Selective adsorption of lead(II) from aqueous solution by ion-imprinted PEI-functionalized silica sorbent: studies on equilibrium isotherm, kinetics, and thermodynamics.
Desalination and Water Treatment, 57, (7), 3270-3282, (2016)
   

Yan FC

Yan FC et al., Preparation of Molecularly Imprinted Polymers for 6-Gingerol Separation.
Food Science, 30, (20), 227-230, (2009)
   

Peng N et al., Preparation and Binding Characteristics of Molecularly Imprinted Polymers for Furan.
Chinese Journal of Analytical Chemistry, 38, (4), 559-563, (2010)
   

Yan FH

Hu C et al., Extraction of the toluene exposure biomarkers hippuric acid and methylhippuric acid using a magnetic molecularly imprinted polymer, and their quantitation by LC-MS/MS.
Microchimica Acta, 186, (3), Article135-(2019)
   

Yan FY

Tan SJ et al., A dummy molecularly imprinted solid-phase extraction coupled with liquid chromatography-tandem mass spectrometry for selective determination of four pyridine carboxylic acid herbicides in milk.
Journal of Chromatography B, 1108, 65-72, (2019)
   

Zhao MJ et al., The determination of patulin from food samples using dual-dummy molecularly imprinted solid-phase extraction coupled with LC-MS/MS.
Journal of Chromatography B, 1125, Article121714-(2019)
   

Zhao MJ et al., Preparation of core-shell magnetic molecularly imprinted polymers for extraction of patulin from juice samples.
Journal of Chromatography A, 1615, Article460751-(2020)
   

Yan G

Wan LB et al., Dummy molecularly imprinted solid phase extraction in a nylon membrane filter for analysis of vardenafil in health care products.
Microchemical Journal, 165, Article106157-(2021)
   

Yan GL

Liu HY et al., Monolithic molecularly imprinted columns for chromatographic separation.
Chromatographia, 61, (9-10), 429-432, (2005)
   

Shen N et al., Imprinted Human Serum Albumin with Antioxidant Activity.
Chemical Research in Chinese Universities, 27, (2), 258-263, (2011)
   

Yan GQ

Miao YM et al., Construction of biomolecular sensors based on quantum dots.
RSC Advances, 6, (110), 109009-109022, (2016)
   

Luo SQ et al., Molecular imprinting based on phosphorescent resonance energy transfer for malachite green detection in fishes and water.
New Journal of Chemistry, 42, (12), 9510-9516, (2018)
   

Luo SQ et al., Phosphorimetric determination of 4-nitrophenol using mesoporous molecular imprinting polymers containing manganese(II)-doped ZnS quantum dots.
Microchimica Acta, 186, (4), Article249-(2019)
   

Miao YM et al., -Phosphorescent Mesoporous Surface Imprinting Microspheres: Preparation and Application for Transferrin Recognition from Biological Fluids.
ACS Applied Materials & Interfaces, 11, (2), 2264-2272, (2019)
   

Yan H

Yan H et al., Special selectivity of molecularly imprinted monolithic stationary phase.
Journal of Liquid Chromatography & Related Technologies, 28, (20), 3147-3155, (2005)
   

Yan H et al., Molecularly imprinted monolithic stationary phases for liquid chromatographic separation of tryptophan and N-CBZ-phenylalanine enantiomers.
Biotechnology and Bioprocess Engineering, 11, (4), 357-363, (2006)
   

Yan H et al., Characteristic and synthetic approach of molecularly imprinted polymer.
International Journal of Molecular Sciences, 7, (5-6), 155-178, (2006)
   

Yan H et al., Characteristic and molecular recognition mechanism of theophylline monolithic molecularly imprinted polymer.
Journal of Liquid Chromatography & Related Technologies, 29, (10), 1393-1404, (2006)
   

Yan H et al., Preparation and characterization of theophylline-imprinted monolithic column.
Separation Science and Technology, 41, (9), 1841-1855, (2006)
   

Yan H et al., Molecularly Imprinted-Matrix Solid-Phase Dispersion for Selective Extraction of Five Fluoroquinolones in Eggs and Tissue.
Analytical Chemistry, 79, (21), 8242-8248, (2007)
   

Yan H et al., Characteristics of a monolithic molecularly imprinted column and its application for chromatographic separation.
Journal of Industrial and Engineering Chemistry, 13, (4), 552-557, (2007)
   

Yan H et al., Rapid determination of enrofloxacin from bovine milk by liquid chromatography with monolithic imprinted column.
Abstracts of Papers of the American Chemical Society, 236, (ANYL), 88-(2008)
   

Yan H et al., Molecularly imprinted solid-phase extraction for determination of enrofloxacin and ciprofloxacin in chicken muscle.
Bulletin of the Korean Chemical Society, 29, (6), 1173-1178, (2008)
   

Yan H et al., Novel molecularly imprinted monolithic column for selective on-line extraction of ciprofloxacin from human urine.
Biomedical Chromatography, 22, (5), 487-493, (2008)
   

Yan H et al., Water-compatible molecularly imprinted polymers for selective extraction of ciprofloxacin from human urine.
Talanta, 75, (1), 227-232, (2008)
   

Yan H et al., Determination of enrofloxacin and ciprofloxacin in milk using molecularly imprinted solid-phase extraction.
Journal of Separation Science, 31, (16-17), 3015-3020, (2008)
   

Yan H et al., Selective Solid-Phase Extraction of Glabridin from Licorice Root using Molecularly Imprinted Polymer.
Separation Science and Technology, 44, (2), 359-369, (2009)
   

Yan H et al., Molecularly Imprinted Monolithic Column for Selective On-Line Extraction of Enrofloxacin and Ciprofloxacin from Urine.
Chromatographia, 70, (7), 1087-1093, (2009)
   

Yan H et al., Ionic liquid-mediated molecularly imprinted solid-phase extraction coupled with gas chromatography-electron capture detector for rapid screening of dicofol in vegetables.
Journal of Chromatography A, 1307, 21-26, (2013)
   

Liu JJ et al., Synthesis of molecularly imprinted polymer for strong adsorption of rhodamine B and the evaluation of its adsorption ability.
Journal of Food Safety and Quality, 8, (3), 958-962, (2017)
   

Ma MM et al., Interfacial potentiometry with double poles sensor based on molecularly imprinted polymer for monitoring of 4-aminoazobenzene.
International Journal of Environmental Analytical Chemistry, 97, (3), 289-300, (2017)
   

Wu L et al., Surface Imprinted Gold Nanoparticle Based Surface Enhanced Raman Scattering for Sensitive and Specific Detection of Patulin in Food Samples.
Food Analytical Methods, 12, (7), 1648-1657, (2019)
   

Zhu YY et al., Enzyme induced molecularly imprinted polymer on SERS substrate for ultrasensitive detection of patulin.
Analytica Chimica Acta, 1101, 111-119, (2020)
   

Lu ZY et al., Pollutant template method synthesis of oxygen vacancy and template cavity riched TB-TiO2@MFA towards selective photodegradation of ciprofloxacin.
Applied Surface Science, 569, Article151027-(2021)
   

Yang YY et al., Molecularly imprinted solid-phase extraction of Chikusetsu saponin IVa from Panacis majoris Rhizoma.
Journal of Separation Science, 44, (19), 3665-3676, (2021)
   

Lu ZY et al., Heterotopic reaction strategy for enhancing selective reduction and synergistic oxidation ability through trapping Cr (VI) into specific reaction site: A stable and self-cleaning ion imprinted CdS/HTNW photocatalytic membrane.
Applied Catalysis B: Environmental, 301, Article120787-(2022)
   

Yan H et al., Aqueous-phase synthesis of heterojunction molecular imprinted photocatalytic nanoreactor via stable interaction forces for improved selectivity and photocatalytic property.
Applied Surface Science, 579, Article152174-(2022)
   

Yan HJ

Ji WH et al., Selective extraction and determination of chlorogenic acids as combined quality markers in herbal medicines using molecularly imprinted polymers based on a mimic template.
Analytical and Bioanalytical Chemistry, 409, (30), 7087-7096, (2017)
   

Bai JW et al., Synthesis and characterization of paclitaxel-imprinted microparticles for controlled release of an anticancer drug.
Materials Science and Engineering: C, 92, 338-348, (2018)
   

Yan HL

Yang XX et al., Screening for the bioactive constituents of traditional Chinese medicines-progress and challenges.
RSC Advances, 7, (6), 3089-3100, (2017)
   

Yan HS

Liu GD et al., Utilization of synergetic effect of weak interactions in the design of polymeric sorbents with high sorption selectivity.
Journal of Chromatography A, 952, (1-2), 71-78, (2002)
   

Zhao M et al., Efficient synthesis of narrowly dispersed hydrophilic and magnetic molecularly imprinted polymer microspheres with excellent molecular recognition ability in a real biological sample.
Chemical Communications, 50, (17), 2208-2210, (2014)
   

Zhao M et al., Well-Defined Hydrophilic Molecularly Imprinted Polymer Microspheres for Efficient Molecular Recognition in Real Biological Samples by Facile RAFT Coupling Chemistry.
Biomacromolecules, 15, (5), 1663-1675, (2014)
   

Yan HY

Qiao FX et al., Molecularly Imprinted Polymers for Solid Phase Extraction.
Chromatographia, 64, (11), 625-634, (2006)
   

Yan HY et al., Determination of Three Tanshinones from Radix Salvia Miltiorrhiza by Molecularly Imprinted Solid-phase Extraction.
Chinese Journal of Chemistry, 27, (11), 2212-2216, (2009)
   

Lv YK et al., Enrofloxacin-imprinted monolithic HPLC columns synthesized by in situ copolymerization for chromatographic separation.
Journal of Liquid Chromatography & Related Technologies, 34, (9), 705-718, (2011)
   

Qiao FX et al., Simultaneous analysis of fluoroquinolones and xanthine derivatives in serum by molecularly imprinted matrix solid-phase dispersion coupled with liquid chromatography.
Journal of Chromatography B, 879, (30), 3551-3555, (2011)
   

Qiao JD et al., Simultaneous Determination of Four Sudan Dyes in Egg Yolks by Molecularly Imprinted SPE Coupled with LC-UV Detection.
Chromatographia, 73, (3), 227-233, (2011)
   

Qiao JD et al., Determination of ofloxacin and lomefloxacin in chicken muscle using molecularly imprinted solid-phase extraction coupled with liquid chromatography.
Journal of Separation Science, 34, (19), 2668-2673, (2011)
   

Wang H et al., Determination of dicofol in aquatic products using molecularly imprinted solid-phase extraction coupled with GC-ECD detection.
Talanta, 85, (4), 2100-2105, (2011)
   

Yan HY et al., Molecularly imprinted solid-phase extraction combined with ultrasound-assisted dispersive liquid-liquid microextraction for the determination of four Sudan dyes in sausage samples.
Analyst, 136, (12), 2629-2634, (2011)
   

Yan HY et al., Application of molecularly imprinted solid-phase extraction on drug residues in animal source foods.
Chinese Journal of Chromatography, 29, (7), 572-579, (2011)
   

Yan HY et al., Molecularly imprinted matrix solid-phase dispersion combined with dispersive liquid-liquid microextraction for the determination of four Sudan dyes in egg yolk.
Journal of Chromatography A, 1218, (16), 2182-2188, (2011)
   

Yan HY et al., Rapid and selective screening of melamine in bovine milk using molecularly imprinted matrix solid-phase dispersion coupled with liquid chromatography-ultraviolet detection.
Journal of Chromatography B, 908, 137-142, (2012)
   

Yan HY et al., Proceeding, Preparation and Characteristic of the New Magnetic Organic–Inorganic Hybrid Molecularly Imprinted Microsphere Materials, 
Sung WP, Kao CM, Chen R (Eds.), 1106-1109, (2012)
   

Yan HY et al., Screening, recognition and quantitation of salbutamol residues in ham sausages by molecularly imprinted solid phase extraction coupled with high-performance liquid chromatography-ultraviolet detection.
Journal of Chromatography B, 900, (1), 18-23, (2012)
   

Yan HY et al., Miniaturized molecularly imprinted matrix solid-phase dispersion coupled with high performance liquid chromatography for rapid determination of auxins in orange samples.
Journal of Chromatography A, 1256, 1-8, (2012)
   

Yan HY et al., Dummy Molecularly Imprinted Solid-Phase Extraction for Selective Determination of Five Phthalate Esters in Plastic Bottled Functional Beverages.
Journal of Agricultural and Food Chemistry, 60, (22), 5524-5531, (2012)
   

Yan HY et al., Simultaneous determination of four plant hormones in bananas by molecularly imprinted solid-phase extraction coupled with high performance liquid chromatography.
Analyst, 137, (12), 2884-2890, (2012)
   

Yan HY et al., Proceeding, Analysis of Cyanazine and Atrazine in Cucumber by Pseudo Imprinted Solid-Phase Extraction Coupled with Liquid Chromatography, 
Sung WP, Kao JCM, Chen R (Eds.), 289-292, (2012)
   

Yan HY et al., Molecularly imprinted solid-phase extraction coupled to liquid chromatography for determination of Sudan dyes in preserved beancurds.
Food Chemistry, 132, (1), 649-654, (2012)
   

Han YH et al., Rapid determination of acyclovir in edible creatural tissues by molecularly imprinted matrix solid-phase dispersion coupled with high performance liquid chromatography.
Analytical Methods, 5, (13), 3285-3290, (2013)
   

Liu ST et al., Water-Compatible Molecularly Imprinted Microspheres in Pipette Tip Solid-Phase Extraction for Simultaneous Determination of Five Fluoroquinolones in Eggs.
Journal of Agricultural and Food Chemistry, 61, (49), 11974-11980, (2013)
   

Wang F et al., Selective screening of trace trazine herbicides in tomato samples employing dummy molecularly imprinted solid-phase extraction coupled with liquid chromatography.
Analytical Methods, 5, (9), 2398-2405, (2013)
   

Yan HY et al., Ionic liquids modified dummy molecularly imprinted microspheres as solid phase extraction materials for the determination of clenbuterol and clorprenaline in urine.
Journal of Chromatography A, 1294, 10-16, (2013)
   

Yan HY et al., Synthesis of Multi-core-shell Magnetic Molecularly Imprinted Microspheres for Rapid Recognition of Dicofol in Tea.
Journal of Agricultural and Food Chemistry, 61, (11), 2896-2901, (2013)
   

Cheng XL et al., Vortex-assisted magnetic dispersive solid-phase microextraction for rapid screening and recognition of dicofol residues in tea products.
Food Chemistry, 162, 104-109, (2014)
   

Qiao JD et al., Dispersive Solid-Phase Extraction Based on Magnetic Dummy Molecularly Imprinted Microspheres for Selective Screening of Phthalates in Plastic Bottled Beverages.
Journal of Agricultural and Food Chemistry, 62, (13), 2782-2789, (2014)
   

Yan HY et al., Ionic liquid molecularly imprinted polymers for application in pipette-tip solid-phase extraction coupled with gas chromatography for rapid screening of dicofol in celery.
Journal of Chromatography A, 1361, 53-59, (2014)
   

Yan HY et al., Hybrid molecularly imprinted polymers synthesized with 3-aminopropyltriethoxysilane-methacrylic acid monomer for miniaturized solid-phase extraction: A new and economical sample preparation strategy for determination of acyclovir in urine.
Journal of Chromatography A, 1346, 16-24, (2014)
   

Yan HY et al., Rapid screening of ofloxacin enantiomers in human urine by molecularly imprinted solid-phase extraction coupled with ligand exchange chromatography.
Journal of Liquid Chromatography & Related Technologies, 37, (9), 1237-1248, (2014)
   

Yang X et al., Synthesis of a novel molecularly imprinted organic-inorganic hybrid polymer for the selective isolation and determination of fluoroquinolones in tilapia.
Journal of Chromatography B, 945-946, 127-134, (2014)
   

Lv TW et al., Hydrophilic Molecularly Imprinted Resorcinol-Formaldehyde-Melamine Resin Prepared in Water with Excellent Molecular Recognition in Aqueous Matrices.
Analytical Chemistry, 87, (21), 11084-11091, (2015)
   

Yang C et al., Glyoxal-Urea-Formaldehyde Molecularly Imprinted Resin as Pipette Tip Solid-Phase Extraction Adsorbent for Selective Screening of Organochlorine Pesticides in Spinach.
Journal of Agricultural and Food Chemistry, 63, (43), 9650-9656, (2015)
   

Yuan YA et al., Ionic liquid-molecularly imprinted polymers for pipette tip solid-phase extraction of (Z)-3-(chloromethylene)-6-flourothiochroman-4-one in urine.
Journal of Chromatography A, 1408, 49-55, (2015)
   

Cao JK et al., Hydrophilic molecularly imprinted melamine-urea-formaldehyde monolithic resin prepared in water for selective recognition of plant growth regulators.
Analytica Chimica Acta, 943, 136-145, (2016)
   

Qiao FX et al., Molecularly imprinted ionic liquid magnetic microspheres for the rapid isolation of organochlorine pesticides in environmental water.
Journal of Separation Science, 39, (7), 1310-1315, (2016)
   

Wang L et al., Synthesis of mimic molecularly imprinted ordered mesoporous silica adsorbent by thermally reversible semicovalent approach for pipette-tip solid-phase extraction-liquid chromatography fluorescence determination of estradiol in milk.
Journal of Chromatography A, 1456, 58-67, (2016)
   

Wang MY et al., Water-compatible dummy molecularly imprinted resin prepared in aqueous solution for green miniaturized solid-phase extraction of plant growth regulators.
Journal of Chromatography A, 1458, 9-17, (2016)
   

Han YH et al., Ionic Liquid-Hybrid Molecularly Imprinted Material-Filter Solid-Phase Extraction Coupled with HPLC for Determination of 6-Benzyladenine and 4-Chlorophenoxyacetic Acid in Bean Sprouts.
Journal of Agricultural and Food Chemistry, 65, (8), 1750-1757, (2017)
   

Liang SR et al., Molecularly imprinted phloroglucinol-formaldehyde-melamine resin prepared in a deep eutectic solvent for selective recognition of clorprenaline and bambuterol in urine.
Analytica Chimica Acta, 951, 68-77, (2017)
   

Yuan YN et al., Green synthesis of hydrophilic protein-imprinted resin with specific recognition of bovine serum albumin in aqueous matrix.
Analytica Chimica Acta, 1033, 213-220, (2018)
   

Cao JK et al., Attapulgite/hydrophilic molecularly imprinted monolithic resin composite for the selective recognition and sensitive determination of plant growth regulators in cucumbers.
Food Chemistry, 297, Article124974-(2019)
   

Wang MW et al., Green protocol for the preparation of hydrophilic molecularly imprinted resin in water for the efficient selective extraction and determination of plant hormones from bean sprouts.
Analytica Chimica Acta, 1064, 47-55, (2019)
   

Han YH et al., Newly designed molecularly imprinted 3-aminophenol-glyoxal-urea resin as hydrophilic solid-phase extraction sorbent for specific simultaneous determination of three plant growth regulators in green bell peppers.
Food Chemistry, 311, Article125999-(2020)
   

Yuan YN et al., Selective extraction and detection of [beta]-agonists in swine urine for monitoring illegal use in livestock breeding.
Food Chemistry, 313, Article126155-(2020)
   

Chen X et al., Selective, sensitive, and miniaturized analytical method based on molecularly imprinted graphene oxide composites for the determination of naphthalene-derived plant growth regulators in apples.
Food Chemistry, 349, Article128982-(2021)
   

Wu XQ et al., Efficient enrichment and analysis of atrazine and its degradation products in Chinese Yam using accelerated solvent extraction and pipette tip solid-phase extraction followed by UPLC-DAD.
Food Chemistry, 337, Article127752-(2021)
   

Yan J

Li Q et al., Study on the influence factors to the binding performance of molecular imprinted polymers.
Chemical Research and Application, 19, (5), 550-552, (2007)
   

Chen HY et al., Fast determination of sulfonamides and their acetylated metabolites from environmental water based on magnetic molecularly imprinted polymers.
Environmental Science and Pollution Research, 20, (12), 8567-8578, (2013)
   

He KC et al., Selective adsorption of L-TA/D-TA by [beta]-cyclodextrin derivative modified with l-tryptophan: Isotherm, kinetic and thermodynamics studies.
Journal of Industrial and Engineering Chemistry, 20, (4), 1293-1300, (2014)
   

Chen HY et al., Rapid preparation of molecularly imprinted polymers by microwave-assisted emulsion polymerization for the extraction of florfenicol in milk.
Journal of Chromatography B, 983-984, 32-38, (2015)
   

Chen X et al., Preparation of Promecarb Electrochemical Sensor Based on 3D-Graphene and Molecularly Imprinted Polymer.
Chinese Journal of Analytical Chemistry, 44, (12), 1834-1839, (2016)
   

Zhang H et al., Recent Advances in Molecular Imprinting-Electrochemiluminescence Technology.
Journal of Instrumental Analysis, 35, (6), 769-776, (2016)
   

Wu JK et al., Facile Preparation of a Bacteria Imprinted Artificial Receptor for Highly Selective Bacterial Recognition and Label-Free Impedimetric Detection.
Analytical Chemistry, 91, (1), 1027-1033, (2019)
   

Wang RN et al., Rapid, sensitive and label-free detection of pathogenic bacteria using a bacteria-imprinted conducting polymer film-based electrochemical sensor.
Talanta, 226, Article122135-(2021)
   

Wu YL et al., Dual-imprinted mixed matrix membranes for selective recognition and separation: A synergetic imprinting strategy based on complex initiation system.
Journal of Colloid and Interface Science, 606, 87-100, (2022)
   

Yan M et al., Polydopamine-based multilevel molecularly imprinted nanocomposite membranes comprising metal organic frameworks for selective recognition and separation.
Journal of Colloid and Interface Science, 606, 696-708, (2022)
   

Yan JH

Pu JZ et al., Synthesis and Characterization of Molecularly Imprinted Polymers for the Recognition of Lidocaine.
Journal of Instrumental Analysis, 23, (3), 86-89, (2004)
   

Yan JJ

Korostynska O et al., Proceeding, Flexible Approach to Sensors Arrays Nanopatterning for Real-Time Water Contaminants Monitoring Platform, 
Hristoforou E, Vlachos DS (Eds.), 55-58, (2013)
   

Yan JL

Yang ZP et al., Enhanced removal of bilirubin on molecularly imprinted titania film.
Colloids and Surfaces B: Biointerfaces, 87, (1), 187-191, (2011)
   

Yang ZP et al., Piezoelectric detection of bilirubin based on bilirubin-imprinted titania film electrode.
Analytical Biochemistry, 421, (1), 37-42, (2012)
   

Zhang CJ et al., Enhanced adsorption of atrazine from aqueous solution by molecularly imprinted TiO2 film.
Solid State Sciences, 14, (7), 777-781, (2012)
   

Liu BZ et al., Molecularly Imprinted Electrochemical Sensor for the Determination of Sulfamethoxazole.
Journal of New Materials for Electrochemical Systems, 21, (2), 63-131, (2018)
   

Liu BZ et al., Electrochemical Sensor Based on Molecularly Imprinted Polymer for Determination of Nonylphenol.
International Journal of Electrochemical Science, 13, 11953-11960, (2018)
   

Liu BZ et al., Molecularly imprinted electrochemical sensor for the detection of bisphenol A.
International Journal of Electrochemical Science, 14, 3510-3617, (2019)
   

Yan JX

Yan JX et al., A novel high selectivity sensor for tetradifon residues based on double-side hollow molecularly imprinted materials.
Analytical Methods, 4, (1), 177-182, (2012)
   

Yan JY

Yan JY et al., Combined strategy for preparation of a bioimprinted Geotrichum sp. lipase biocatalyst effective in non-aqueous media.
Process Biochemistry, 44, (10), 1128-1132, (2009)
   

Yan JY et al., Preparation of a Crosslinked Bioimprinted Lipase for Enrichment of Polyunsaturated Fatty Acids from Fish Processing Waste.
Applied Biochemistry and Biotechnology, 162, (3), 757-765, (2010)
   

Ji SL et al., Synthesis of molecularly imprinted polymer sorbents and application for the determination of aminoglycosides antibiotics in honey.
Journal of Chromatography A, 1313, 113-118, (2013)
   

Yan K

Wang R et al., A highly sensitive photoelectrochemical sensor for 4-aminophenol based on CdS-graphene nanocomposites and molecularly imprinted polypyrrole.
Electrochimica Acta, 121, 102-108, (2014)
   

Wang B et al., A highly selective electrochemical sensor for 4-chlorophenol determination based on molecularly imprinted polymer and PDDA-functionalized graphene.
Sensors and Actuators B: Chemical, 236, 294-303, (2016)
   

Yan K et al., Highly Selective Self-Powered Sensing Platform for p-Nitrophenol Detection Constructed with a Photocathode-Based Photocatalytic Fuel Cell.
Analytical Chemistry, 89, (17), 8599-8603, (2017)
   

Yan K et al., A self-powered sensor based on molecularly imprinted polymer-coupled graphitic carbon nitride photoanode for selective detection of bisphenol A.
Sensors and Actuators B: Chemical, 259, 394-401, (2018)
   

Yan KL

Xiao XH et al., Rapid analysis of ractopamine in pig tissues by dummy-template imprinted solid-phase extraction coupling with surface-enhanced Raman spectroscopy.
Talanta, 138, 40-45, (2015)
   

Yan L

He ZH et al., Fabrication of new cellulose acetate blend imprinted membrane assisted with ionic liquid ([BMIM]Cl) for selective adsorption of salicylic acid from industrial wastewater.
Separation and Purification Technology, 145, 63-74, (2015)
   

Long F et al., Cobalt-nickel bimetallic nanoparticles decorated graphene sensitized imprinted electrochemical sensor for determination of octylphenol.
Electrochimica Acta, 168, 337-345, (2015)
   

Luo HY et al., Molecularly imprinted open porous membranes made from Pickering W/O HIPEs for selective adsorption and separation of methyl 4-hydroxybenzoate.
Chinese Chemical Letters, 26, (8), 1036-1041, (2015)
   

Meng MJ et al., Fabrication of a novel cellulose acetate imprinted membrane assisted with chitosan-wrapped multi-walled carbon nanotubes for selective separation of salicylic acid from industrial wastewater.
Journal of Applied Polymer Science, 132, (42), ArticleNo42654-(2015)
   

Sun FQ et al., Fabrication of ordered microporous styrene-acrylonitrile copolymer blend imprinted membranes for selective adsorption of phenol from salicylic acid using breath figure method.
Journal of Applied Polymer Science, 132, (31), ArticleNo42350-(2015)
   

Yin YL et al., Magnetic molecularly imprinted polydopamine nanolayer on multiwalled carbon nanotubes surface for protein capture.
Talanta, 144, 671-679, (2015)
   

Zhang ZH et al., Preparation of novel curcumin-imprinted polymers based on magnetic multi-walled carbon nanotubes for the rapid extraction of curcumin from ginger powder and kiwi fruit root.
Journal of Separation Science, 38, (1), 108-114, (2015)
   

Long F et al., Magnetic imprinted electrochemical sensor combined with magnetic imprinted solid-phase extraction for rapid and sensitive detection of tetrabromobisphenol S.
Journal of Electroanalytical Chemistry, 777, 58-66, (2016)
   

Long F et al., Magnetic Graphene Modified Imprinted Electrochemical Sensor for Detection of 4-Octylphenol.
Chinese Journal of Analytical Chemistry, 44, (6), 908-914, (2016)
   

Mao YL et al., Fabrication of highly selective molecularly imprinted membranes for the selective adsorption of methyl salicylate from salicylic acid.
RSC Advances, 6, (94), 91659-91668, (2016)
   

Yan L et al., Synthesis and Application of Novel 3D Magnetic Chlorogenic Acid Imprinted Polymers Based on a Graphene-Carbon Nanotube Composite.
Journal of Agricultural and Food Chemistry, 64, (15), 3091-3100, (2016)
   

Yin YL et al., Polydopamine-coated magnetic molecularly imprinted polymer for the selective solid-phase extraction of cinnamic acid, ferulic acid and caffeic acid from radix scrophulariae sample.
Journal of Separation Science, 39, (8), 1480-1488, (2016)
   

Yan L et al., A facile synthesis of novel three-dimensional magnetic imprinted polymers for rapid extraction of bovine serum albumin in bovine calf serum.
Analytical and Bioanalytical Chemistry, 409, (13), 3453-3463, (2017)
   

Yin YL et al., Magnetic Molecularly Imprinted Polymer Preconcentration of 4-Chlorophenol with Determination by High-Performance Liquid Chromatography.
Analytical Letters, 50, (1), 117-134, (2017)
   

Zhao J et al., Molecularly imprinted nanocomposite membranes based on GO/PVDF blended membranes with an organic-inorganic structure for selective separation of norfloxacin.
New Journal of Chemistry, 41, (24), 14966-14976, (2017)
   

Cui JY et al., Synthesis of cauliflower-like ion imprinted polymers for selective adsorption and separation of lithium ion.
New Journal of Chemistry, 42, (17), 14502-14509, (2018)
   

Gao J et al., Bioinspired synthesis of multi-walled carbon nanotubes based enoxacin-imprinted nanocomposite membranes with excellent antifouling and selective separation properties.
Journal of the Taiwan Institute of Chemical Engineers, 91, 468-480, (2018)
   

Wu XL et al., Bioinspired synthesis of pDA@GO-based molecularly imprinted nanocomposite membranes assembled with dendrites-like Ag microspheres for high-selective adsorption and separation of ibuprofen.
Journal of Membrane Science, 553, 151-162, (2018)
   

Chen LF et al., Preparation and application of graphene oxide-based surface molecularly imprinted polymer for monolithic fiber array solid phase microextraction of organophosphate flame retardants in environmental water.
Journal of Chromatography A, 1623, Article461200-(2020)
   

Jian YJ et al., Molecularly imprinted polymers immobilized on graphene oxide film for monolithic fiber solid phase microextraction and ultrasensitive determination of triphenyl phosphate.
Analytica Chimica Acta, 1133, 1-10, (2020)
   

Yan LG

Xu R et al., Molecular imprinted photoelectrochemical sensor for bisphenol A supported by flower-like AgBiS2/In2S3 matrix.
Sensors and Actuators B: Chemical, 330, Article129387-(2021)
   

Yan LP

Shao MY et al., Carbon Quantum Dots Encapsulated Molecularly Imprinted Fluorescence Quenching Particles for Sensitive Detection of Zearalenone in Corn Sample.
Toxins, 10, (11), ArticleNo438-(2018)
   

Yan LQ

Zhong M et al., Pyrrole-phenylboronic acid: A novel monomer for dopamine recognition and detection based on imprinted electrochemical sensor.
Biosensors and Bioelectronics, 64, 212-218, (2015)
   

Yan LS

Yan LS et al., Molecularly imprinted polymer monoliths prepared in capillaries by photoinitiated in situ polymerization for the screening of caffeine.
Chemical Journal of Chinese Universities, 22, (12), 2008-2010, (2001)
   

Yan LS et al., Determination of caffeine by micro high performance liquid chromatography with a molecularly imprinted capillary monolithic column.
Chinese Journal of Analytical Chemistry, 32, (2), 148-152, (2004)
   

Yan LS et al., Preparation of Chloramphenicol- Imprinted Polymer.
Journal of Nanchang Institute of Aeronautical Technology (Natural Sciences), 19, (1), 1-5, (2005)
   

Yan LS et al., Preparation of quercetin-imprinted polymer and its property as a sorbent for solid phase extraction.
Chinese Journal of Analysis Laboratory, 25, (5), 97-100, (2006)
   

Luo XB et al., Novel molecularly imprinted polymer using 1-([alpha]-methyl acrylate)-3-methylimidazolium bromide as functional monomer for simultaneous extraction and determination of water-soluble acid dyes in wastewater and soft drink by solid phase extraction and high performance liquid chromatography.
Journal of Chromatography A, 1218, (8), 1115-1121, (2011)
   

Guo HQ et al., Synthesis of molecularly imprinted polymers using acrylamide-[beta]-cyclodextrin as a cofunctional monomer for the specific capture of tea saponins from the defatted cake extract of Camellia oleifera.
Journal of Separation Science, 39, (22), 4439-4448, (2016)
   

Sheng L et al., Well-defined magnetic surface imprinted nanoparticles for selective enrichment of 2, 4-dichlorophenoxyacetic acid in real samples.
Talanta, 174, 725-732, (2017)
   

Guo HQ et al., Surface molecular imprinting on carbon microspheres for fast and selective adsorption of perfluorooctane sulfonate.
Journal of Hazardous Materials, 348, 29-38, (2018)
   

Lin LK et al., Selective extraction of perfluorooctane sulfonate in real samples by superparamagnetic nanospheres coated with a polydopamine-based molecularly imprinted polymer.
Journal of Separation Science, 44, (5), 1015-1025, (2021)
   

Yan LY

El Jaouhari A et al., Enhanced molecular imprinted electrochemical sensor based on zeolitic imidazolate framework/reduced graphene oxide for highly recognition of rutin.
Analytica Chimica Acta, 1106, 103-114, (2020)
   

Yan M

Yan M et al., Fabrication of molecularly imprinted polymer microstructures.
Analytica Chimica Acta, 435, (1), 163-167, (2001)
   

Chen Y et al., Optical Molecularly Imprinted Polymer Sensors.
Proceedings of the Oregon Academy of Science, 39, 37-37, (2003)
   

Chen Y et al., Steady-State Fluorescence Anisotropy Studies Of Molecularly Imprinted Polymer Sensors.
Proceedings of the Oregon Academy of Science, 40, 49-49, (2004)
   

Brazier JJ et al., Book chapter, Micromonoliths and microfabricated molecularly imprinted polymers, 
In: Molecularly Imprinted Materials: Science and Technology, Yan M, Ramström O (Eds.) Marcel Dekker: New York, Ch. 19, 491-516, (2005)
   

Dong WG et al., A computational and experimental investigation of the interaction between the template molecule and the functional monomer used in the molecularly imprinted polymer.
Analytica Chimica Acta, 542, (2), 186-192, (2005)
   

Dong WG et al., Effect of solvent on molecular recognition of molecularly imprinted polymer: Experimental investigation and computational quantum chemistry analysis.
Journal of Chemical Industry and Engineering (China), 56, (7), 1247-1252, (2005)
   

Dong WG et al., Effect of functional monomer on molecular recognition of molecularly imprinted polymer: Quantum chemical calculation and experimental investigation.
Journal of Chemical Industry and Engineering (China), 56, (11), 2131-2136, (2005)
   

Ramström O et al., Book chapter, Molecular imprinting - an introduction, 
In: Molecularly Imprinted Materials: Science and Technology, Yan M, Ramström O (Eds.) Marcel Dekker: New York, Ch. 1, 1-12, (2005)
   

Dong WG et al., Effects of solvents on the adsorption selectivity of molecularly imprinted polymers: Molecular simulation and experimental validation.
Separation and Purification Technology, 53, (2), 183-188, (2007)
   

Ge SG et al., On-line molecular imprinted solid-phase extraction flow-injection fluorescence sensor for determination of florfenicol in animal tissues.
Journal of Pharmaceutical and Biomedical Analysis, 52, (4), 615-619, (2010)
   

Wan FW et al., A high throughput chemiluminescence method based on molecularly imprinted sol-gel films for determination of sibutramine.
Advanced Materials Letters, 1, (2), 164-169, (2010)
   

Yu JH et al., Molecularly imprinted polymeric microspheres for determination of bovine serum albumin based on flow injection chemiluminescence sensor.
Biosensors and Bioelectronics, 26, (2), 632-637, (2010)
   

Ge SG et al., Layer-by-layer self-assembly CdTe quantum dots and molecularly imprinted polymers modified chemiluminescence sensor for deltamethrin detection.
Sensors and Actuators B: Chemical, 156, (1), 222-227, (2011)
   

Ge SG et al., Development of a novel deltamethrin sensor based on molecularly imprinted silica nanospheres embedded CdTe quantum dots.
Spectrochimica Acta Part A-Molecular and Biomolecular Spctroscopy, 79, (5), 1704-1709, (2011)
   

Zhao PN et al., Determination of glyphosate in foodstuff by one novel chemiluminescence-molecular imprinting sensor.
Spectrochimica Acta Part A-Molecular and Biomolecular Spctroscopy, 78, (5), 1482-1486, (2011)
   

Chen AW et al., Novel thiourea-modified magnetic ion-imprinted chitosan/TiO2 composite for simultaneous removal of cadmium and 2, 4-dichlorophenol.
Chemical Engineering Journal, 191, (1), 85-94, (2012)
   

Ge SG et al., Multi-branch chemiluminescence-molecular imprinting sensor for sequential determination of carbofuran and omethoate in foodstuff.
Analytical Methods, 4, (10), 3150-3156, (2012)
   

Yan JX et al., A novel high selectivity sensor for tetradifon residues based on double-side hollow molecularly imprinted materials.
Analytical Methods, 4, (1), 177-182, (2012)
   

Zang DJ et al., A novel high selectivity chemiluminescence sensor for fenvalerate based on double-sided hollow molecularly imprinted materials.
Analyst, 137, (18), 4247-4253, (2012)
   

Zhao PN et al., One novel chemiluminescence sensor for determination of fenpropathrin based on molecularly imprinted porous hollow microspheres.
Sensors and Actuators B: Chemical, 162, (1), 166-172, (2012)
   

Ge L et al., Molecularly Imprinted Polymer Grafted Porous Au-Paper Electrode for an Microfluidic Electro-Analytical Origami Device.
Advanced Functional Materials, 23, (24), 3115-3123, (2013)
   

Wang PP et al., Visible light photoelectrochemical sensor based on Au nanoparticles and molecularly imprinted poly(o-phenylenediamine)-modified TiO2 nanotubes for specific and sensitive detection chlorpyrifos.
Analyst, 138, (3), 939-945, (2013)
   

Wang PP et al., Photoelectrochemical lab-on-paper device based on molecularly imprinted polymer and porous Au-paper electrode.
Analyst, 138, (17), 4802-4811, (2013)
   

Wang SM et al., Molecularly imprinted polymer grafted paper-based multi-disk micro-disk plate for chemiluminescence detection of pesticide.
Biosensors and Bioelectronics, 50, 262-268, (2013)
   

Wang YH et al., A novel microfluidic origami photoelectrochemical sensor based on CdTe quantum dots modified molecularly imprinted polymer and its highly selective detection of S-fenvalerate.
Electrochimica Acta, 107, 147-154, (2013)
   

Zang DJ et al., A disposable simultaneous electrochemical sensor array based on a molecularly imprinted film at a NH2-graphene modified screen-printed electrode for determination of psychotropic drugs.
Analyst, 138, (9), 2704-2711, (2013)
   

Sun GQ et al., Photoelectrochemical sensor for pentachlorophenol on microfluidic paper-based analytical device based on the molecular imprinting technique.
Biosensors and Bioelectronics, 56, 97-103, (2014)
   

Wu YL et al., Fabrication and Evaluation of Artemisinin-Imprinted Composite Membranes by Developing a Surface Functional Monomer-Directing Prepolymerization System.
Langmuir, 30, (49), 14789-14796, (2014)
   

Wu Y et al., Accelerating the design of multi-component nanocomposite imprinted membranes by integrating a versatile metal-organic methodology with a mussel-inspired secondary reaction platform.
Green Chemistry, 17, (6), 3338-3349, (2015)
   

Wu YL et al., Bio-inspired adhesion: fabrication and evaluation of molecularly imprinted nanocomposite membranes by developing a "bio-glue" imprinted methodology.
RSC Advances, 5, (57), 46146-46157, (2015)
   

Wu YL et al., Bio-inspired adhesion: Fabrication of molecularly imprinted nanocomposite membranes by developing a hybrid organic-inorganic nanoparticles composite structure.
Journal of Membrane Science, 490, 169-178, (2015)
   

Wu YL et al., A Multiple-Functional Ag/SiO2/Organic Based Biomimetic Nanocomposite Membrane for High-Stability Protein Recognition and Cell Adhesion/Detachment.
Advanced Functional Materials, 25, (36), 5823-5832, (2015)
   

Wang YH et al., Paper-based colorimetric analytical device based on molecularly imprinted polymers.
Nanomedicine: Nanotechnology, Biology and Medicine, 12, (2), 534-534, (2016)
   

Ge SG et al., Nanomaterials-modified cellulose paper as a platform for biosensing applications.
Nanoscale, 9, (13), 4366-4382, (2017)
   

Sun XL et al., Photoelectrochemical sensor based on molecularly imprinted film modified hierarchical branched titanium dioxide nanorods for chlorpyrifos detection.
Sensors and Actuators B: Chemical, 251, 1-8, (2017)
   

Wu YL et al., Facile bio-functionalized design of thermally responsive molecularly imprinted composite membrane for temperature-dependent recognition and separation applications.
Chemical Engineering Journal, 309, 98-107, (2017)
   

Chen SN et al., Rapid and sensitive biomarker detection using molecular imprinting polymer hydrogel and surface-enhanced Raman scattering.
Royal Society Open Science, 5, (1), ArticleNo171488-(2018)
   

Sun XL et al., Ultrasensitive Microfluidic Paper-Based Electrochemical Biosensor Based on Molecularly Imprinted Film and Boronate Affinity Sandwich Assay for Glycoprotein Detection.
ACS Applied Materials & Interfaces, 11, (17), 16198-16206, (2019)
   

Yan M et al., Fabrication and evaluation of bioinspired pDA@TiO2-based ibuprofen-imprinted nanocomposite membranes for highly selective adsorption and separation applications.
New Journal of Chemistry, 44, (25), 10703-10712, (2020)
   

Yan M et al., Polydopamine-based multilevel molecularly imprinted nanocomposite membranes comprising metal organic frameworks for selective recognition and separation.
Journal of Colloid and Interface Science, 606, 696-708, (2022)
   

Yan MD

Yan MD et al., Microfabricated molecularly imprinted polymers.
Abstracts of Papers of the American Chemical Society, 219, (OLY), 165-165, (2000)
   

Kapua A et al., Molecularly imprinted polymer thin films and microstructures.
Abstracts of Papers of the American Chemical Society, 221, (IEC), 403-403, (2001)
   

Brazier JJ et al., Proceeding, Molecularly imprinted polymers used as optical waveguides for the detection of fluorescent analytes, 
Shea KJ, Yan M, Roberts MJ, Cremer PS, Crooks RM, Sailor MJ (Eds.), 115-120, (2002)
   

Yan MD, Molecularly imprinted polymers as antibody mimics: Applications in immunoassays and recent developments.
Journal of Clinical Ligand Assay, 25, (2), 234-236, (2002)
   

Chen YC et al., Book chapter, Evaluation of molecularly imprinted polyurethane as an optical waveguide for PAH sensing, 
In: Nanosensing: Materials And Devices, Islam MS, Dutta AK (Eds.) The International Society for Optical Engineering: 513-520, (2004)
   

Chen YC et al., Fluorescence-based optical sensor design for molecularly imprinted polymers.
Sensors and Actuators B: Chemical, 102, (1), 107-116, (2004)
   

Chen YC et al., Book chapter, Steady-state fluorescence anisotropy studies of molecularly imprinted polymer sensors, 
In: Molecularly Imprinted Materials-2003, Kofinas P, Sellergren B, Roberts MJ (Eds.) Materials Research Society: Warrendale, Ch. 6, 35-39, (2004)
   

Chen YC et al., Fluorescence anisotropy studies of molecularly imprinted polymers.
Luminescence, 21, (1), 7-14, (2006)
   

Xu CG et al., Photoconjugation of Molecularly Imprinted Polymer with Magnetic Nanoparticles.
ACS Applied Materials & Interfaces, 5, (11), 5208-5213, (2013)
   

Chaudhary S et al., Controlled short-linkage assembly of functional nano-objects.
Applied Surface Science, 300, 22-28, (2014)
   

Kamra T et al., Photoconjugation of Molecularly Imprinted Polymer Nanoparticles for Surface-Enhanced Raman Detection of Propranolol.
ACS Applied Materials & Interfaces, 7, (49), 27479-27485, (2015)
   

Yan MM

Yan MM et al., Advance of molecularly imprinted technology based on nanomaterials.
Chinese Journal of Analysis Laboratory, 37, (5), 607-613, (2018)
   

Hong SH et al., A Novel CdSe/ZnS Quantum Dots Fluorescence Assay Based on Molecularly Imprinted Sensitive Membranes for Determination of Triazophos Residues in Cabbage and Apple.
Frontiers in Chemistry, 7, Article130-(2019)
   

Wang SS et al., Dual-template imprinted polymers for class-selective solid-phase extraction of seventeen triazine herbicides and metabolites in agro-products.
Journal of Hazardous Materials, 367, 686-693, (2019)
   

Yan MM et al., A molecularly imprinted polymer with integrated gold nanoparticles for surface enhanced Raman scattering based detection of the triazine herbicides, prometryn and simetryn.
Microchimica Acta, 186, (3), Article143-(2019)
   

Zhao MJ et al., The determination of patulin from food samples using dual-dummy molecularly imprinted solid-phase extraction coupled with LC-MS/MS.
Journal of Chromatography B, 1125, Article121714-(2019)
   

Ma J et al., An overview on molecular imprinted polymers combined with surface-enhanced Raman spectroscopy chemical sensors toward analytical applications.
Talanta, 225, Article122031-(2021)
   

Yan MP

Fang GZ et al., An ion-imprinted functionalized silica gel sorbent prepared by a surface imprinting technique combined with a sol-gel process for selective solid-phase extraction of cadmium(II).
Analytical Chemistry, 77, (6), 1734-1739, (2005)
   

Yan P

Chen SE et al., 12-Plex UHPLC-MS/MS analysis of sarcosine in human urine using integrated principle of multiplex tags chemical isotope labeling and selective imprint enriching.
Talanta, 224, Article121788-(2021)
   

Yan QF

Liu QS et al., Novel Beta-Tubulin-Immobilized Nanoparticles Affinity Material for Screening [beta]-Tubulin Inhibitors from a Complex Mixture.
ACS Applied Materials & Interfaces, 9, (7), 5725-5732, (2017)
   

Yan QL

Yang F et al., Preparation and application of a molecularly imprinted monolith for specific recognition of domoic acid.
Analytical and Bioanalytical Chemistry, 410, (6), 1845-1854, (2018)
   

Yan QW

Wen YP et al., Imprinted voltammetric streptomycin sensor based on a glassy carbon electrode modified with electropolymerized poly(pyrrole-3-carboxy acid) and electrochemically reduced graphene oxide.
Microchimica Acta, 184, (3), 935-941, (2017)
   

Yan RH

Huang J et al., Rational designed molecularly imprinted triazine-based porous aromatic frameworks for enhanced palladium capture via three synergistic mechanisms.
Chemical Engineering Journal, 430, Article132962-(2022)
   

Yan RX

Wang F et al., Selectivity/Specificity Improvement Strategies in Surface-Enhanced Raman Spectroscopy Analysis.
Sensors, 17, (11), ArticleNo2689-(2017)
   

Wang ZW et al., In situ reduced silver nanoparticles embedded molecularly imprinted reusable sensor for selective and sensitive SERS detection of Bisphenol A.
Applied Surface Science, 457, 323-331, (2018)
   

Yan RY

Ke CB et al., Diltiazem-imprinted porphyrinic covalent organic frameworks as solid-phase extractants and fluorescent sensors.
Analytica Chimica Acta, 1168, Article338608-(2021)
   

Wang ZH et al., The fabrication of molecularly imprinted polymer microspheres via Pickering emulsion polymerization stabilized with novel ferric hydroxide colloid.
Reactive and Functional Polymers, 169, Article105084-(2021)
   

Wang ZH et al., Facile fabrication of snowman-like magnetic molecularly imprinted polymer microspheres for bisphenol A via one-step Pickering emulsion polymerization.
Reactive and Functional Polymers, 164, Article104911-(2021)
   

Yan S

Li JW et al., Molecularly imprinted calixarene fiber for solid-phase microextraction of four organophosphorous pesticides in fruits.
Food Chemistry, 192, 260-267, (2016)
   

Yan SL

Yan SL et al., Progress of molecular imprinting technique on the determination of pesticides residues.
Journal of Hygiene Research, 34, (2), 227-230, (2005)
   

Fang YJ et al., Recognition mechanism and affinity assessment of maleic hydrazide molecularly imprinted polymers.
Journal of Preventive Medicine of Chinese People's Liberation Army, 24, (3), 171-174, (2006)
   

Yan SL et al., Preparation and affinity assessment of monocrotophos molecularly imprinted polymers.
Acta Polymerica Sinica, (1), 160-163, (2006)
   

Yan SL et al., Monocrotophos molecularly imprinted microspheres prepared by precipitation polymerization in acetonitrile.
Rare Metal Materials And Engineering, 35, (Suppl. 3), 621-622, (2006)
   

Yan SL et al., Characterization and quality assessment of binding properties of malachite green molecularly imprinted polymers prepared by precipitation polymerization in acetonitrile.
Dyes and Pigments, 74, (3), 572-577, (2007)
   

Yan SL et al., Quartz crystal microbalance for the determination of daminozide using molecularly imprinted polymers as recognition element.
Biosensors and Bioelectronics, 22, (6), 1087-1091, (2007)
   

Yan SL et al., Determination of Daminozide in Apple Sample by MIP-Coated Piezoelectric Quartz Sensor.
Analytical Letters, 40, (6), 1013-1021, (2007)
   

Yan SL et al., Characterization and quality assessment of binding properties of the monocrotophos molecularly imprinted microspheres prepared by precipitation polymerization in toluene.
Polymer Engineering & Science, 47, (9), 1302-1308, (2007)
   

Fang YJ et al., Flow injection chemiluminescence sensor using molecularly imprinted polymers as recognition element for determination of maleic hydrazide.
Biosensors and Bioelectronics, 24, (8), 2323-2327, (2009)
   

Yang WH et al., Preparation and recognized characteristic of 4-methyl imidazole molecularly imprinted polymers.
China Brewing, (5), 73-(2009)
   

Lv YK et al., Effects of cation-anion on recognition characteristics of sarafloxacin -Co(II) complex imprinted polymer in aqueous media.
Chemical Journal on Internet, 12, (1), (2010)
   

Yang WH et al., Preparation of Melamine Molecularly Imprinted Polymer Microspheres by Precipitation Polymerization.
Acta Polymerica Sinica, (10), 1163-1169, (2010)
   

Yang WH et al., Preparation and Application of Core-Shell Magnetic Molecularly Imprinted Polymer Microspheres.
Progress In Chemistry, 22, (9), 1819-1825, (2010)
   

Lv YK et al., Preparation and Characterization of Imprinted Polymers Based on Cobalt(II)-Enrofloxacin Coordination.
Asian Journal of Chemistry, 23, (9), 4037-4041, (2011)
   

Lv YK et al., Synthesis and Evaluation of Restricted Access Material-Molecularly Imprinted Polymer Based on Self-Assembly and Sol-Gel Technique.
Asian Journal of Chemistry, 24, (9), 3905-3908, (2012)
   

Lv YK et al., Synthesis and characterization of molecularly imprinted poly(methacrylic acid)/silica hybrid composite materials for selective recognition of lincomycin in aqueous media.
Journal of Applied Polymer Science, 126, (5), 1631-1636, (2012)
   

Zhou XN et al., Proceeding, Preparation and Recognized Characteristic of Histamine Molecularly Imprinted Polymers, 
Liu ZL, Peng F, Liu XG (Eds.), 780-786, (2012)
   

Lv YK et al., Synthesis and characterization of the molecularly imprinted mesoporous silica based on the self-assembly technique for selective recognition of lomefloxacin in aqueous solution.
Journal of Porous Materials, 20, (5), 1345-1352, (2013)
   

Li CL et al., Determination of tyramine in soy sauce by molecular imprinting solid phase extraction coupled with high performance liquid chromatography.
Journal of Food Safety and Quality, 5, (9), 2728-2734, (2014)
   

Haran Y et al., Preparation of Quantum Dots and Fluorescent Molecularly Imprinted Composite Microspheres for Determination of Tyramine.
Journal of Nanotechnology and Materials Science, 4, (2), 1-7, (2017)
   

Yan SZ

Basavaraja C et al., Dependence of molecular recognition for a specific cation on the change of the oxidation state of the metal catalyst component in the hydrogel network.
Bulletin of the Korean Chemical Society, 28, (5), 805-810, (2007)
   

Yan W

Feng QZ et al., Molecularly imprinted solid-phase extraction and flow-injection chemiluminescence for trace analysis of 2, 4-dichlorophenol in water samples.
Analytical and Bioanalytical Chemistry, 391, (3), 1073-1079, (2008)
   

Feng QZ et al., Synthesis and binding site characteristics of 2, 4, 6-trichlorophenol-imprinted polymers.
Analytical and Bioanalytical Chemistry, 392, (7-8), 1419-1429, (2008)
   

Ji F et al., Synthesis and evaluation of surface molecularly imprinted silica for propazine pesticide.
Chinese Journal of Analytical Chemistry, 36, (7), 920-924, (2008)
   

Feng QZ et al., Molecularly imprinted solid-phase extraction combined with high performance liquid chromatography for analysis of phenolic compounds from environmental water samples.
Journal of Hazardous Materials, 167, (1-3), 282-288, (2009)
   

Jiang TH et al., Molecularly imprinted solid-phase extraction for the selective determination of 17[beta]-estradiol in fishery samples with high performance liquid chromatography.
Talanta, 78, (2), 442-447, (2009)
   

Guoning C et al., Preparation of molecularly imprinted polymers and application in a biomimetic biotin-avidin-ELISA for the detection of bovine serum albumin.
Talanta, 198, 55-62, (2019)
   

Yan WY

Yan WY et al., Capillary electrochromatographic separation of ionizable compounds with a molecular imprinted monolithic cationic exchange column.
Journal of Separation Science, 26, (6-7), 555-561, (2003)
   

Yan WY et al., The recognition mechanism of 4-aminopyridine molecularly imprinted polymer-based monolithic capillary column in electrochromatography.
Chinese Journal of Analysis Laboratory, 22, (2), 5-7, (2003)
   

Yan WY et al., Preparation of 4-aminopyridine imprinted polymer-based monolithic capillary column and evaluation of electrochromatography.
Chemical Journal of Chinese Universities, 24, (6), 1026-1030, (2003)
   

Yang YK et al., Magnetic molecularly imprinted electrochemical sensors: A review.
Analytica Chimica Acta, 1106, 1-21, (2020)
   

Yang YK et al., Development of a molecularly imprinted photoelectrochemical sensing platform based on NH2-MIL-125(Ti)-TiO2 composite for the sensitive and selective determination of oxtetracycline.
Biosensors and Bioelectronics, 177, Article113000-(2021)
   

Yan X

Yan X et al., Determination of hydralazine with flow injection chemiluminescence sensor using molecularly imprinted polymer as recognition element.
Journal of Pharmaceutical and Biomedical Analysis, 41, (3), 694-700, (2006)
   

Yan X et al., Review of optical sensors for pesticides.
TrAC Trends in Analytical Chemistry, 103, 1-20, (2018)
   

Yan XM

Jia XH et al., Design, preparation, surface recognition properties, and characteristics of icariin molecularly imprinted polymers.
Cogent Chemistry, 1, (1), 1059597-(2015)
   

Li W et al., Fabrication of Surface Protein-Imprinted Nanoparticles Using a Metal Chelating Monomer via Aqueous Precipitation Polymerization.
ACS Applied Materials & Interfaces, 7, (49), 27188-27196, (2015)
   

Yang CC et al., Synthesis of surface protein-imprinted nanoparticles endowed with reversible physical cross-links.
Biosensors and Bioelectronics, 75, 129-135, (2016)
   

Gao Y et al., Selective recognition and preliminary separation of hepatoprotective component silybin from milk thistle seeds by the prepared core-shell magnetic molecularly imprinted polymer.
Journal of Polymer Research, 25, (7), ArticleNo150-(2018)
   

Zhang W et al., Preparation, adsorption and recognition properties of uranyl ion-imprinted marine facultative fungus mainly modified by phytic acid and tetraethyl silicate.
Journal of Radioanalytical and Nuclear Chemistry, 317, (2), 701-714, (2018)
   

Fang LW et al., Isolation of aristolochic acid I from herbal plant using molecular imprinted polymer composited ionic liquid-based zeolitic imidazolate framework-67.
Journal of Separation Science, 42, (19), 3047-3053, (2019)
   

Yan XN

Liu YT et al., Electrochemical sensor based on a poly(para-aminobenzoic acid) film modified glassy carbon electrode for the determination of melamine in milk.
Electrochimica Acta, 56, (12), 4595-4602, (2011)
   

Yan XN et al., Preparation and application of isocarbophos sensor based on molecularly imprinting technique.
Chinese Journal of Analysis Laboratory, 31, (2), 41-46, (2012)
   

Yan XN et al., A novel electrochemical sensor for isocarbophos based on a glassy carbon electrode modified with electropolymerized molecularly imprinted terpolymer.
Sensors and Actuators B: Chemical, 171-172, 1087-1094, (2012)
   

Yan XP

Lv YK et al., Study on adsorption and recognition of ion-imprinted materials synthesized by sol-gel method for cadmium ions.
Journal of Guangxi Normal University (Natural Science Edition), 21, (z6), 304-304, (2003)
   

Lu YK et al., An imprinted organic-inorganic hybrid sorbent for selective separation of cadmium from aqueous solution.
Analytical Chemistry, 76, (2), 453-457, (2004)
   

Fang GZ et al., Synthesis and evaluation of an ion-imprinted functionalized sorbent for selective separation of cadmium ion.
Separation Science and Technology, 40, (8), 1597-1608, (2005)
   

Han DM et al., Preparation and evaluation of a molecularly imprinted sol-gel material for on-line solid-phase extraction coupled with high performance liquid chromatography for the determination of trace pentachlorophenol in water samples.
Journal of Chromatography A, 1100, (2), 131-136, (2005)
   

Lü YK et al., Preparation and application of molecularly imprinted sol-gel materials.
Chinese Journal of Analytical Chemistry, 33, (2), 254-260, (2005)
   

Wang HF et al., A Room Temperature Ionic Liquid (RTIL)-Mediated, Non-Hydrolytic Sol-Gel Methodology to Prepare Molecularly Imprinted, Silica-Based Hybrid Monoliths for Chiral Separation.
Advanced Materials, 18, (24), 3266-3270, (2006)
   

Wang HF et al., Fabrication of molecularly imprinted hybrid monoliths via a room temperature ionic liquid-mediated nonhydrolytic sol-gel route for chiral separation of zolmitriptan by capillary electrochromatography.
Electrophoresis, 29, (4), 952-959, (2008)
   

Tan J et al., A fluorescent sensor array based on ion imprinted mesoporous silica.
Biosensors and Bioelectronics, 24, (11), 3316-3321, (2009)
   

Tan J et al., Discrimination of Saccharides with a Fluorescent Molecular Imprinting Sensor Array Based on Phenylboronic Acid Functionalized Mesoporous Silica.
Analytical Chemistry, 81, (13), 5273-5280, (2009)
   

Wang HF et al., Surface Molecular Imprinting on Mn-Doped ZnS Quantum Dots for Room-Temperature Phosphorescence Optosensing of Pentachlorophenol in Water.
Analytical Chemistry, 81, (4), 1615-1621, (2009)
   

Wu P et al., A simple chemical etching strategy to generate "ion-imprinted" sites on the surface of quantum dots for selective fluorescence turn-on detecting of metal ions.
Chemical Communications, (37), 7046-7048, (2010)
   

Tan J et al., Molecularly-imprinted monoliths for sample treatment and separation.
TrAC Trends in Analytical Chemistry, 39, 207-217, (2012)
   

Tan J et al., Book chapter, Discrimination of Analytes with Fluorescent Molecular Imprinting Sensor Arrays, 
In: Molecularly Imprinted Sensors, Li SJ, Ge Y, Piletsky SA, Lunec J (Eds.) Elsevier: Amsterdam, Ch. 7, 161-173, (2012)
   

Wang HF et al., Book chapter, Molecularly Imprinted Room Temperature Phosphorescent Optosensors for Environmental Pollutants, 
In: Handbook of Molecular Imprinting - Advanced Sensor Applications, Lee SW, Kunitake T (Eds.) Pan Stanford Publishing Pte. Ltd.: Singapore, Ch. 10, 359-388, (2013)
   

Wu P et al., Doped quantum dots for chemo/biosensing and bioimaging.
Chemical Society Reviews, 42, (12), 5489-5521, (2013)
   

Yan XP et al., Rapid Detection of Dimethoate in Soybean Samples by Microfluidic Paper Chips Based on Oil-Soluble CdSe Quantum Dots.
Foods, 10, (11), ArticleNo2810-(2021)
   

Yan XS

Pan JM et al., Magnetic molecularly imprinted microcapsules derived from Pickering emulsion polymerization and their novel adsorption characteristics for [lambda]-cyhalothrin.
RSC Advances, 4, (9), 4435-4443, (2014)
   

Yan XW

Lv SW et al., Near-Infrared Light-Responsive Hydrogel for Specific Recognition and Photothermal Site-Release of Circulating Tumor Cells.
ACS Nano, 10, (6), 6201-6210, (2016)
   

Yan XX

Peng RF et al., An investigation of template anchoring strategy for molecularly imprinting materials based on nanomagnetic polyhedral oligomeric silsesquioxanes composites.
Journal of Chromatography A, 1597, 28-38, (2019)
   

He HB et al., Boronate affinity directing adenosine imprinted nanomagnetic polyhedral oligomeric silsesquioxanes for selective extraction of nucleosides in urine sample.
Microchemical Journal, 169, Article106575-(2021)
   

Yan XY

Zhou H et al., Direct synthesis of surface molecularly imprinted polymers based on vinyl-SiO2 nanospheres for recognition of bisphenol A.
Journal of Applied Polymer Science, 128, (6), 3846-3852, (2013)
   

Li J et al., Solid-phase extraction for selective determination of bisphenol A in drinks and fruits by dummy surface molecularly imprinted polymer with direct synthetic method.
Food Additives & Contaminants: Part A, 31, (6), 1139-1146, (2014)
   

Zhu FL et al., Preparation and recognition characteristics of alanine surface molecularly imprinted polymers.
Analytical Methods, 7, (20), 8740-8749, (2015)
   

Chang TT et al., One-pot synthesis of uniform and monodisperse superparamagnetic molecularly imprinted polymer nanospheres through a sol-gel process for selective recognition of bisphenol A in aqueous media.
RSC Advances, 6, (70), 66297-66306, (2016)
   

Gu Y et al., Biomimetic sensor based on molecularly imprinted polymer with nitroreductase-like activity for metronidazole detection.
Biosensors and Bioelectronics, 77, 393-399, (2016)
   

Yang R et al., An effective method for the synthesis of yolk-shell magnetic mesoporous carbon-surface molecularly imprinted microspheres.
Journal of Materials Chemistry A, 4, (25), 9807-9815, (2016)
   

Yang R et al., Simultaneous extraction and determination of phthalate esters in aqueous solution by yolk-shell magnetic mesoporous carbon-molecularly imprinted composites based on solid-phase extraction coupled with gas chromatography-mass spectrometry.
Talanta, 161, 114-121, (2016)
   

Chang TT et al., Magnetic Dummy Template Silica Sol-Gel Molecularly Imprinted Polymer Nanospheres as Magnetic Solid-Phase Extraction Material for the Selective and Sensitive Determination of Bisphenol A in Plastic Bottled Beverages.
Food Analytical Methods, 10, (12), 3980-3990, (2017)
   

Wei MX et al., Preparation and evaluation of superparamagnetic core-shell dummy molecularly imprinted polymer for recognition and extraction of organophosphorus pesticide.
Journal of Materials Science, 53, (7), 4897-4912, (2018)
   

Fu X et al., Superparamagnetic core-shell dummy template molecularly imprinted polymer for magnetic solid-phase extraction of food additives prior to the determination by HPLC.
Microchemical Journal, 150, Article104169-(2019)
   

Yan Y

Liu YQ et al., Research and progress of mimetic enzymes.
Progress In Chemistry, 17, (6), 1067-1073, (2005)
   

Liu YQ et al., Investigation and progress of chromatography column packed with molecularly imprinted polymer.
Chemical Research and Application, 19, (4), 351-357, (2007)
   

Liu YQ et al., Development of Molecularly Imprinted Polymer Sensor.
Journal of Instrumental Analysis, 26, (3), 450-454, (2007)
   

Li C et al., Adsorption behaviors of Sr(II) in aqueous solution by attapulgite and its surface ion-imprinted polymer.
Journal of the Chinese Ceramic Society, 37, (10), 1705-1711, (2009)
   

Li N et al., Separation and purification of the antioxidant compound hispidin from mushrooms by molecularly imprinted polymer.
Applied Microbiology and Biotechnology, 99, (18), 7569-7577, (2015)
   

Yan Y et al., Imprinted photonic hydrogel pillar for self-reporting water treatment of heavy metal ions.
RSC Advances, 5, (118), 97604-97610, (2015)
   

Meng XJ et al., Proceeding, Molecularly Imprinted Polymers-Based Electrochemical Sensor for Detection of Nitrocellulose, 
Woodley C, Cullis I (Eds.), 705-708, (2016)
   

Yan YF

Fang GZ et al., Highly Selective Determination of Chrysoidine in Foods Through a Surface Molecularly Imprinted Sol-Gel Polymer Solid-Phase Extraction Coupled with HPLC.
Food Analytical Methods, 7, (2), 345-351, (2014)
   

Yan YJ

Cao XW et al., Optimization of the lipase imprinting with fat acid in silane matrix.
Applied Chemical Industry, 37, (7), 717-720, 724, (2008)
   

Cao XW et al., Improving esterification activity of Burkholderia cepacia lipase encapsulated in silica by bioimprinting with substrate analogues.
Process Biochemistry, 44, (2), 177-182, (2009)
   

Yan JY et al., Combined strategy for preparation of a bioimprinted Geotrichum sp. lipase biocatalyst effective in non-aqueous media.
Process Biochemistry, 44, (10), 1128-1132, (2009)
   

Li DY et al., Thermo-sensitive imprinted polymer embedded carbon dots using epitope approach.
Biosensors and Bioelectronics, 79, 187-192, (2016)
   

Yan YJ et al., Nitrogen-doped graphene quantum dots-labeled epitope imprinted polymer with double templates via the metal chelation for specific recognition of cytochrome c.
Biosensors and Bioelectronics, 91, 253-261, (2017)
   

Li K et al., Enhancing enzyme activity and enantioselectivity of Burkholderia cepacia lipase via immobilization on melamine-glutaraldehyde dendrimer modified magnetic nanoparticles.
Chemical Engineering Journal, 351, 258-268, (2018)
   

Yan YN

Yang C et al., Extensive Imprinting Adaptability of Polyacrylamide-based Amphoteric Cryogels Against Protein Molecules.
Chinese Journal of Analytical Chemistry, 44, (9), 1322-1327, (2016)
   

Yang C et al., Depletion of abundant human serum proteins by per se imprinted cryogels based on sample heterogeneity.
Proteomics, 17, (9), ArticleNo1600284-(2017)
   

Wang J et al., Preparation and Performance of an Estradiol Templated Magnetic Sphere of Molecularly Imprinted Cryogel.
Journal of the Brazilian Chemical Society, 29, (1), 2-10, (2018)
   

Yang C et al., Synthesis of Molecularly Imprinted Cryogels to Deplete Abundant Proteins from Bovine Serum.
Polymers, 10, (1), ArticleNo97-(2018)
   

Yan YS

Ge YR et al., A novel molecularly imprinted polymer:synthesis and adsorption behavior of gatifloxacin.
Chinese Journal of Reactive Polymers, 17, (2), 29-35, (2008)
   

Huo PW et al., Molecular imprinting technology and its application in field of catalysis.
Chemical Reagents, 30, (6), 421-425, 448, (2008)
   

Li CX et al., Application and progress of molecularly imprinted technique in analytical chemistry.
Metallurgical Analysis, 28, (12), 41-50, (2008)
   

Pan JM et al., Preparation of surface ion-imprinted attapulgite-supported polymer and its adsorption behaviors of Sr(II).
Chinese Journal of Reactive Polymers, 17, (2), 55-65, (2008)
   

Duan YQ et al., Selective Separation of Rhein by Molecular Imprinting Polymer and Solid-phase Extraction.
Chemistry and Industry of Forest Products, 29, (5), 35-40, (2009)
   

Li CX et al., An ion-imprinted polymer supported by attapulgite with a chitosan incorporated sol-gel process for selective separation of Ce(III).
Chinese Chemical Letters, 20, (8), 985-989, (2009)
   

Li CX et al., Synthesis, characterization, and adsorption performance of Pb(II)-imprinted polymer in nano-TiO2 matrix.
Journal of Environmental Sciences, 21, (12), 1722-1729, (2009)
   

Li CX et al., A novel CeIII-imprinted polymer supported by attapulgite: synthesis, characterisation and adsorption behaviours towards CeIII in aqueous solution.
International Journal of Materials and Structural Integrity, 3, (4), 294-308, (2009)
   

Li CX et al., Strontium(II) ion surface-imprinted polymers supported by potassium tetratitanate whiskers: Synthesis, characterization and adsorption behaviours.
Adsorption Science & Technology, 27, (9), 845-859, (2009)
   

Wang LL et al., Application of nano-materials in the analysis of metal ions.
Metallurgical Analysis, 29, (2), 37-44, (2009)
   

Wang LL et al., Synthesis, characterization and adsorption behavior of Pb2+ - Imprinted polymer in aqueous solution.
Chinese Journal of Analytical Chemistry, 37, (4), 537-542, (2009)
   

Xu PP et al., Molecularly-imprinted Material for Dibenzothiophene Recognition Prepared by Surface Imprinting Methods.
Adsorption Science & Technology, 27, (10), 975-987, (2009)
   

Duan YQ et al., Optimization of the process parameters of synthesis of oligomeric procyanidins imprinted polymer.
Scientific Research and Essays, 5, (19), 2953-2964, (2010)
   

Huang WH et al., Preparation, Characterization and Performance of a Novel Surfaceimprinting Polymer for the Adsorption of Dibenzothiophene.
Adsorption Science & Technology, 28, (7), 629-640, (2010)
   

Li CX et al., Synthesis and characterisation of sodium trititanate whisker surface CdII ion-imprinted polymer and selective solid-phase extraction of cadmium.
International Journal of Materials and Structural Integrity, 4, (2-3), 291-307, (2010)
   

Liu Y et al., Synthesis and Adsorption Performance of Surface-Grafted Co(II)-Imprinted Polymer for Selective Removal of Cobalt.
Chinese Journal of Chemistry, 28, (4), 548-554, (2010)
   

Liu Y et al., A New Sr(II) Ion-imprinted Polymer Grafted onto Potassium Titanate Whiskers: Synthesis and Adsorption Performance for the Selective Separation of Strontium Ions.
Adsorption Science & Technology, 28, (1), 23-37, (2010)
   

Pan JM et al., Synthesis and applications of Ce(III)-imprinted polymer based on attapulgite as the sacrificial support material for selective separation of cerium(III) ions.
Microchimica Acta, 171, (1), 151-160, (2010)
   

Pan JM et al., Selective recognition of 2, 4-dichlorophenol from aqueous solution by uniformly sized molecularly imprinted microspheres with [beta]-cyclodextrin/attapulgite composites as support.
Chemical Engineering Journal, 162, (3), 910-918, (2010)
   

Pan JM et al., Selective Adsorption of Co(II) Ions by Whisker Surface Ion-Imprinted Polymer: Equilibrium and Kinetics Modeling.
Chinese Journal of Chemistry, 28, (12), 2483-2488, (2010)
   

Pan JM et al., Progress in the study of separation, enrichment and analysis of mid-low radioactive metallic elements.
Metallurgical Analysis, 30, (8), 35-44, (2010)
   

Pan JM et al., An ion-imprinted polymer based on palygorskite as a sacrificial support for selective removal of strontium(II).
Applied Clay Science, 50, (2), 260-265, (2010)
   

Wang LL et al., Study on adsorption behavior and mechanism of copper(II) ion imprinted polymer.
Metallurgical Analysis, 30, (2), 17-22, (2010)
   

Xu PP et al., A surface-imprinted polymer for removing dibenzothiophene from gasoline.
Microchimica Acta, 171, (3), 441-449, (2010)
   

Zhang XJ et al., A Ce3+-imprinted functionalized potassium tetratitanate whisker sorbent prepared by surface molecularly imprinting technique for selective separation and determination of Ce3+.
Microchimica Acta, 169, (3), 289-296, (2010)
   

Zhang ZL et al., Kinetic and thermodynamic analysis of selective adsorption of Cs(I) by a novel surface whisker-supported ion-imprinted polymer.
Desalination, 263, (1-3), 97-106, (2010)
   

Zhang ZL et al., Analysis of Properties of Cadmium Adsorption onto Whisker Surface Ion-Imprinted Polymer by Inductively Coupled Plasma Atomic Emission Spectrometry.
Spectroscopy and Spectral Analysis, 30, (3), 792-796, (2010)
   

He MQ et al., Synthesis and recognition of molecularly imprinted polymers for gastrodin based on surface-modified silica nanoparticles.
Journal of Applied Polymer Science, 121, (4), 2354-2360, (2011)
   

Huang WH et al., Synthesis and Evaluation of Surface Molecular Imprinted Potassium Tetratitanate Whisker for Dibenzothiophene.
Chinese Journal of Analytical Chemistry, 39, (4), 560-563, (2011)
   

Huo PW et al., Enhanced photodegradation of antibiotics solution under visible light with Fe2+/Fe3+ immobilized on TiO2/fly-ash cenospheres by using ions imprinting technology.
Chemical Engineering Journal, 172, (2-3), 615-622, (2011)
   

Liu Y et al., Selective Adsorption of Co(II) by Mesoporous Silica SBA-15-Supported Surface Ion Imprinted Polymer: Kinetics, Isotherms, and Thermodynamics Studies.
Chinese Journal of Chemistry, 29, (3), 387-398, (2011)
   

Liu Y et al., A surface ion-imprinted mesoporous sorbent for separation and determination of Pb(II) ion by flame atomic absorption spectrometry.
Microchimica Acta, 172, (3), 309-317, (2011)
   

Liu Y et al., Selective adsorption behavior of Pb(II) by mesoporous silica SBA-15-supported Pb(II)-imprinted polymer based on surface molecularly imprinting technique.
Journal of Hazardous Materials, 186, (1), 197-205, (2011)
   

Pan JM et al., Selective Recognition of 2, 4, 6-Trichlorophenol by Molecularly Imprinted Polymers Based on Magnetic Halloysite Nanotubes Composites.
Journal of Physical Chemistry C, 115, (13), 5440-5449, (2011)
   

Pan JM et al., Magnetic molecularly imprinted polymers based on attapulgite/Fe3O4 particles for the selective recognition of 2, 4-dichlorophenol.
Chemical Engineering Journal, 174, (1), 68-75, (2011)
   

Pan JM et al., Molecularly imprinted polymers based on magnetic fly-ash-cenosphere composites for bisphenol A recognition.
Journal of Materials Chemistry, 21, (39), 15741-15751, (2011)
   

Wang X et al., Selective Removal of 3-Chlorophenol from Aqueous Solution Using Surface Molecularly Imprinted Microspheres.
Journal of Chemical & Engineering Data, 56, (6), 2793-2801, (2011)
   

Wang X et al., Selective recognition of sesamol using molecularly imprinted polymers containing magnetic wollastonite.
Journal of Separation Science, 34, (22), 3287-3294, (2011)
   

Wang X et al., Preparation of magnetic imprinted polymer particles via microwave heating initiated polymerization for selective enrichment of 2-amino-4-nitrophenol from aqueous solution.
Chemical Engineering Journal, 178, (1), 85-92, (2011)
   

Xu FF et al., Advance in surface molecularly imprinted carriers.
Chemical Industry and Engineering Progress, 30, (5), 1033-1038, 1134, (2011)
   

Xu FF et al., Preparation and Adsorption Property of (-)-Epigallocatechin Gallate Surface Molecularly Imprinted Polymer.
The Chinese Journal of Process Engineering, 11, (4), 706-710, (2011)
   

Xu WZ et al., A molecularly imprinted polymer based on TiO2 as a sacrificial support for selective recognition of dibenzothiophene.
Chemical Engineering Journal, 172, (1), 191-198, (2011)
   

Xu WZ et al., Preparation and evaluation of a novel surface-imprinted polymer for selective adsorption of dibenzothiophene.
Microchimica Acta, 175, (1), 167-175, (2011)
   

Yu ZX et al., Selective adsorption copper (II) behavior by surface molecular imprinted polymers.
Fresenius Environmental Bulletin, 20, (12), 3186-3193, (2011)
   

Yu ZX et al., Proceeding, Ion-imprinted polymers supported by SiO₂ with a chitosan incorporated sol-gel process for selective separation of Pb(II) and Cu(II) system, 
2921-2924, (2011)
   

Chu JY et al., Selective Removal of 2, 4-Dichlorophenol by Surface Molecularly Imprinted Polymers Based on Amino-Functionalized Fe₃O₄@SiO₂ Composites.
Adsorption Science & Technology, 30, (5), 409-424, (2012)
   

Dai JD et al., Preparation of molecularly imprinted nanoparticles with superparamagnetic susceptibility through atom transfer radical emulsion polymerization for the selective recognition of tetracycline from aqueous medium.
Journal of Hazardous Materials, 205 - 206, (1), 179-188, (2012)
   

Duan YQ et al., Preparation and Adsorption Characteristics of Resveratrol-Imprinted Polymer on Nano-Silica Surface.
Food Science, 33, (9), 6-10, (2012)
   

He MQ et al., A new molecularly imprinted polymer prepared by surface imprinting technique for selective adsorption towards kaempferol.
Polymer Bulletin, 68, (4), 1039-1052, (2012)
   

Huo PW et al., Preparation photocatalyst of selected photodegradation antibiotics by molecular imprinting technology onto TiO2/fly-ash cenospheres.
Chemical Engineering Journal, 189-190, (1), 75-83, (2012)
   

Huo PW et al., Preparation molecular/ions imprinted photocatalysts of La3+@POPD/TiO2/fly-ash cenospheres: Preferential photodegradation of TCs antibiotics.
Chemical Engineering Journal, 198-199, (1), 73-80, (2012)
   

Meng MJ et al., Selective Adsorption of Methylparaben by Submicrosized Molecularly Imprinted Polymer: Batch and Dynamic Flow Mode Studies.
Industrial & Engineering Chemistry Research, 51, (45), 14915-14924, (2012)
   

Pan JM et al., Selective recognition of 2, 4, 5-trichlorophenol by temperature responsive and magnetic molecularly imprinted polymers based on halloysite nanotubes.
Journal of Materials Chemistry, 22, (8), 3360-3369, (2012)
   

Pan JM et al., Switched recognition and release ability of temperature responsive molecularly imprinted polymers based on magnetic halloysite nanotubes.
Journal of Materials Chemistry, 22, (33), 17167-17175, (2012)
   

Wu Y et al., Preparation and characterization of mesoporous silica SBA-15-supported molecularly caffeine-imprinted polymers by surface molecularly imprinting technique.
Journal of Jiangsu University (Medicine Edition), 22, (2), 151-154, (2012)
   

Xu LC et al., Preparation of thermal-responsive magnetic molecularly imprinted polymers for selective removal of antibiotics from aqueous solution.
Journal of Hazardous Materials, 233-234, 48-56, (2012)
   

Xu LC et al., Composites of Silica and Molecularly Imprinted Polymers for Degradation of Sulfadiazine.
Journal of Physical Chemistry C, 116, (48), 25309-25318, (2012)
   

Xu LC et al., Magnetic ZnO surface-imprinted polymers prepared by ARGET ATRP and the application for antibiotics selective recognition.
RSC Advances, 2, (13), 5571-5579, (2012)
   

Yang WM et al., Synthesis and Characterization of a Surface Molecular Imprinted Polymer as a New Adsorbent for the Removal of Dibenzothiophene.
Journal of Chemical & Engineering Data, 57, (6), 1713-1720, (2012)
   

Zhang XJ et al., Selective adsorption of micro ciprofloxacin by molecularly imprinted functionalized polymers appended onto ZnS.
Environmental Technology, 33, (17), 2019-2025, (2012)
   

Duan YQ et al., Determination of epigallocatechin-3-gallate with a high-efficiency electrochemical sensor based on a molecularly imprinted poly(o-phenylenediamine) film.
Journal of Applied Polymer Science, 129, (5), 2882-2890, (2013)
   

Gao X et al., Photocatalytic properties of Fe3+@ dual conducting polymers /TiO2/HNTs composite by ion imprinting technology.
Fresenius Environmental Bulletin, 22, (8A), 2385-2392, (2013)
   

Liu CB et al., Molecular Imprinting in Fluorescent Particle Stabilized Pickering Emulsion for Selective and Sensitive Optosensing of [lambda]-Cyhalothrin.
Journal of Physical Chemistry C, 117, (20), 10445-10453, (2013)
   

Liu XL et al., Microwave-assisted synthesis of selective degradation photocatalyst by surface molecular imprinting method for the degradation of tetracycline onto ClTiO2.
Chemical Engineering Journal, 217, 398-406, (2013)
   

Lu ZY et al., Performance of molecularly imprinted photocatalysts based on fly-ash cenospheres for selective photodegradation of single and ternary antibiotics solution.
Journal of Molecular Catalysis A: Chemical, 378, 91-98, (2013)
   

Lu ZY et al., Preparation and performance of a novel magnetic conductive imprinted photocatalyst for selective photodegradation of antibiotic solution.
RSC Advances, 3, (40), 18373-18382, (2013)
   

Meng MJ et al., Optimization of surface imprinted layer attached poly(vinylidene fluoride) membrane for selective separation of salicylic acid from acetylsalicylic acid using central composite design.
Chemical Engineering Journal, 231, 132-145, (2013)
   

Meng MJ et al., Highly efficient adsorption of salicylic acid from aqueous solution by wollastonite-based imprinted adsorbent: A fixed-bed column study.
Chemical Engineering Journal, 225, 331-339, (2013)
   

Pan JM et al., Fabrication and evaluation of temperature responsive molecularly imprinted sorbents based on surface of yeast via surface-initiated AGET ATRP.
Applied Surface Science, 287, 211-217, (2013)
   

Pan JM et al., Fabrication and Evaluation of Magnetic/Hollow Double-Shelled Imprinted Sorbents Formed by Pickering Emulsion Polymerization.
Langmuir, 29, (25), 8170-8178, (2013)
   

Pan JM et al., Study on the nonylphenol removal from aqueous solution using magnetic molecularly imprinted polymers based on fly-ash-cenospheres.
Chemical Engineering Journal, 223, 824-832, (2013)
   

Wei X et al., Research progress of surface molecular imprinting technique in analytical chemistry.
Ion Exchange and Adsorption, 29, (2), 183-192, (2013)
   

Xing WN et al., Synthesis of thermal-responsive photocatalysts by surface molecular imprinting for selective degradation of tetracycline.
RSC Advances, 3, (48), 26334-26342, (2013)
   

Xu WZ et al., Synthesis of Potassium Tetratitanate-Based Molecularly Imprinted Polymer for Selective Adsorption of Dibenzothiophene.
Adsorption Science & Technology, 31, (10), 917-930, (2013)
   

Yu XN et al., Preparation and photodegradation properties of transition metal ion-poly-o-phenylenediamine/TiO2/fly-ash cenospheres by ion imprinting technology.
RSC Advances, 3, (34), 14807-14813, (2013)
   

Zhang HH et al., Molecularly Imprinted Membrane Possessing Selectivity and Adsorption Behaviour to Targeted (-)-Epigallocatechin-3-gallate Molecule.
Asian Journal of Chemistry, 25, (7), 3711-3718, (2013)
   

Zhang HH et al., Proceeding, Selective Adsorption and Pre-Concentration of Morin by Molecularly Imprinted Polymers with Chitosan Beads as Functional Matrix, 
Yu L, Guo JW, Yi GB, Yu Q (Eds.), 756-759, (2013)
   

Zhang HH et al., Selective Adsorption and Separation of (-)-Epigallocatechin Gallate (EGCG) based on Silica Gel Surface Molecularly Imprinted Polymers.
IERI Procedia, 5, 339-343, (2013)
   

Cao ZJ et al., Preparation of Magnetic Imprinted Core-Shell Particles Through Reverse Atom Transfer Radical Precipitation Polymerization for Selective Removal of Sulfamethazine.
Journal of Computational and Theoretical Nanoscience, 6, (8), 657-665, (2014)
   

Dai JD et al., Versatile Method To Obtain Homogeneous Imprinted Polymer Thin Film at Surface of Superparamagnetic Nanoparticles for Tetracycline Binding.
Industrial & Engineering Chemistry Research, 53, (17), 7157-7166, (2014)
   

Dai JD et al., Narrowly dispersed imprinted microspheres with hydrophilic polymer brushes for the selective removal of sulfamethazine.
RSC Advances, 4, (4), 1965-1973, (2014)
   

Dai JD et al., Surface imprinted core-shell nanorod with ultrathin water-compatible polymer brushes for specific recognition and adsorption of sulfamethazine in water medium.
Journal of Applied Polymer Science, 131, (19), Article No 40854-(2014)
   

Dai JD et al., Highly-controllable imprinted polymer nanoshell at the surface of magnetic halloysite nanotubes for selective recognition and rapid adsorption of tetracycline.
RSC Advances, 4, (16), 7967-7978, (2014)
   

Gan MY et al., Molecularly imprinted polymers derived from lignin-based Pickering emulsions and their selectively adsorption of lambda-cyhalothrin.
Chemical Engineering Journal, 257, 317-327, (2014)
   

Gao L et al., Molecularly imprinted polymer microspheres for optical measurement of ultra trace nonfluorescent cyhalothrin in honey.
Food Chemistry, 156, 1-6, (2014)
   

Gao L et al., A core-shell surface magnetic molecularly imprinted polymers with fluorescence for [lambda]-cyhalothrin selective recognition.
Analytical and Bioanalytical Chemistry, 406, (28), 7213-7220, (2014)
   

Liu CB et al., A simple and sensitive surface molecularly imprinted polymers based fluorescence sensor for detection of [lambda]-Cyhalothrin.
Talanta, 125, 14-23, (2014)
   

Liu LK et al., Molecular Simulation Assisted Design and Preparation of Magnetic Molecularly Imprinted Polymers and Their Characteristics.
Chinese Journal of Analytical Chemistry, 42, (2), 249-257, (2014)
   

Liu XL et al., Surface Molecular Imprinting Modified TiO2 Photocatalyst for Adsorption and Photocatalytic Degradation of Salicylic Acid.
Fresenius Environmental Bulletin, 23, (7A), 1626-1634, (2014)
   

Liu XL et al., Selective degradation of ciprofloxacin with modified NaCl/TiO2 photocatalyst by surface molecular imprinted technology.
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 441, 420-426, (2014)
   

Liu Y et al., Synthesis, characterization, and adsorption properties of a Ce(III)-imprinted polymer supported by mesoporous SBA-15 matrix by a surface molecular imprinting technique.
Canadian Journal of Chemistry - Revue Canadienne de Chimie, 92, (3), 257-266, (2014)
   

Lu ZY et al., Microwave synthesis of a novel magnetic imprinted TiO2 photocatalyst with excellent transparency for selective photodegradation of enrofloxacin hydrochloride residues solution.
Chemical Engineering Journal, 249, 15-26, (2014)
   

Meng MJ et al., Introduction of an ordered porous polymer network into a ceramic alumina membrane via non-hydrolytic sol-gel methodology for targeted dynamic separation.
RSC Advances, 4, (73), 38630-38642, (2014)
   

Meng MJ et al., An ion-imprinted functionalized SBA-15 adsorbent synthesized by surface imprinting technique via reversible addition-fragmentation chain transfer polymerization for selective removal of Ce(III) from aqueous solution.
Journal of Hazardous Materials, 278, 134-143, (2014)
   

Meng MJ et al., Preparation, characterization, and adsorption performance of p-hydroxybenzoic acid imprinted polymer and selective catalysis of toluene to para-chlorotoluene.
Journal of Applied Polymer Science, 131, (8), Article No 40118-(2014)
   

Meng MJ et al., Selective separation of salicylic acid from aqueous solutions using molecularly imprinted nano-polymer on wollastonite synthesized by oil-in-water microemulsion method.
Journal of Industrial and Engineering Chemistry, 20, (6), 3975-3983, (2014)
   

Meng MJ et al., Preparation of composite-imprinted alumina membrane for effective separation of p-hydroxybenzonic acid from its isomer using Box-Behnken design-based statistical modeling.
Journal of Applied Polymer Science, 131, (16), Article No 40621-(2014)
   

Pan JM et al., Magnetic molecularly imprinted microcapsules derived from Pickering emulsion polymerization and their novel adsorption characteristics for [lambda]-cyhalothrin.
RSC Advances, 4, (9), 4435-4443, (2014)
   

Pan JM et al., Molecularly imprinted polymer foams with well-defined open-cell structure derived from Pickering HIPEs and their enhanced recognition of [lambda]-cyhalothrin.
Chemical Engineering Journal, 253, 138-147, (2014)
   

Wang J et al., Surface molecularly imprinted polymers based on yeast prepared by atom transfer radical emulsion polymerization for selective recognition of ciprofloxacin from aqueous medium.
Journal of Applied Polymer Science, 131, (11), Article No 40310-(2014)
   

Wei X et al., Composites of surface imprinting polymer capped Mn-doped ZnS quantum dots for room-temperature phosphorescence probing of 2, 4, 5-trichlorophenol.
Journal of Luminescence, 155, 298-304, (2014)
   

Wei X et al., Synthesis of molecularly imprinted silica nanospheres embedded mercaptosuccinic acid-coated CdTe quantum dots for selective recognition of [lambda]-cyhalothrin.
Journal of Luminescence, 153, 326-332, (2014)
   

Wu YL et al., Efficient one-pot synthesis of artemisinin-imprinted membrane by direct surface-initiated AGET-ATRP.
Separation and Purification Technology, 131, 117-125, (2014)
   

Wu YL et al., Fabrication and Evaluation of Artemisinin-Imprinted Composite Membranes by Developing a Surface Functional Monomer-Directing Prepolymerization System.
Langmuir, 30, (49), 14789-14796, (2014)
   

Wu YL et al., Fabrication and evaluation of molecularly imprinted regenerated cellulose composite membranes via atom transfer radical polymerization.
Chinese Chemical Letters, 25, (2), 273-278, (2014)
   

Yu XN et al., Preparation of rare earth metal ion/TiO2Hal-conducting polymers by ions imprinting technique and its photodegradation property on tetracycline.
Applied Clay Science, 99, 125-130, (2014)
   

Zhao CY et al., One-pot method for obtaining hydrophilic tetracycline-imprinted particles via precipitation polymerization in ethanol.
Journal of Applied Polymer Science, 131, (7), Article 40071-(2014)
   

Zou TB et al., Preparation of silica-based surface-imprinted core-shell nanoadsorbents for the selective recognition of sulfamethazine via reverse atom transfer radical precipitation polymerization.
Journal of Polymer Research, 21, (8), Article No 520-(2014)
   

Zou YL et al., Magnetic and hydrophilic imprinted particles via ATRP at room temperature for selective separation of sulfamethazine.
Colloid & Polymer Science, 292, (2), 333-342, (2014)
   

Chen TT et al., Imprinted ZnO/Magnetic Fly-Ash Photocatalyst Selectively Photodegraded Danofloxacin Mesylate Solution.
Nanoscience and Nanotechnology Letters, 7, (5), 441-445, (2015)
   

Gao L et al., Detection of nonfluorescent cyhalothrin in honey by a spheral SiO2-based particle coating with thin fluorescent molecularly imprinted polymers film.
RSC Advances, 5, (116), 96158-96164, (2015)
   

Gao L et al., Detection of [lambda]-cyhalothrin by a core-shell spherical SiO2-based surface thin fluorescent molecularly imprinted polymer film.
Analytical and Bioanalytical Chemistry, 407, (30), 9177-9184, (2015)
   

He ZH et al., Fabrication of new cellulose acetate blend imprinted membrane assisted with ionic liquid ([BMIM]Cl) for selective adsorption of salicylic acid from industrial wastewater.
Separation and Purification Technology, 145, 63-74, (2015)
   

Liu Y et al., Thermal-responsive ion-imprinted polymer based on magnetic mesoporous silica SBA-15 for selective removal of Sr(II) from aqueous solution.
Colloid & Polymer Science, 293, (1), 109-123, (2015)
   

Liu Y et al., Synthesis of hydrophilic surface ion-imprinted polymer based on graphene oxide for removal of strontium from aqueous solution.
Journal of Materials Chemistry A, 3, (3), 1287-1297, (2015)
   

Lu ZY et al., Selective photodegradation of 2-mercaptobenzothiazole by a novel imprinted CoFe2O4/MWCNTs photocatalyst.
RSC Advances, 5, (59), 47820-47829, (2015)
   

Ma W et al., Core-shell molecularly imprinted polymers based on magnetic chitosan microspheres for chloramphenicol selective adsorption.
Monatshefte für Chemie - Chemical Monthly, 146, (3), 465-474, (2015)
   

Meng MJ et al., Fabrication of a novel cellulose acetate imprinted membrane assisted with chitosan-wrapped multi-walled carbon nanotubes for selective separation of salicylic acid from industrial wastewater.
Journal of Applied Polymer Science, 132, (42), ArticleNo42654-(2015)
   

Meng XG et al., Synthesis of novel ion-imprinted polymers by two different RAFT polymerization strategies for the removal of Cs(I) from aqueous solutions.
RSC Advances, 5, (17), 12517-12529, (2015)
   

Pan JM et al., Thermoresponsive and magnetic molecularly imprinted polymers based on iron oxide encapsulated carbon nanotubes as a matrix for the selective adsorption and controlled release of 2, 4, 5-trichlorophenol.
Journal of Applied Polymer Science, 132, (27), ArticleNo42087-(2015)
   

Pan JM et al., Fabrication and evaluation of molecularly imprinted multi-hollow microspheres adsorbents with tunable inner pore structures derived from templating Pickering double emulsions.
Chemical Engineering Journal, 266, 299-308, (2015)
   

Qiu CX et al., Rational design and preparation of dibenzothiophene-targeting molecularly imprinted polymers with molecular dynamics approaches and surface-initiated activators regenerated by electron-transfer atom-transfer radical polymerization.
Journal of Applied Polymer Science, 132, (41), ArticleNo42629-(2015)
   

Sun FQ et al., Fabrication of ordered microporous styrene-acrylonitrile copolymer blend imprinted membranes for selective adsorption of phenol from salicylic acid using breath figure method.
Journal of Applied Polymer Science, 132, (31), ArticleNo42350-(2015)
   

Wang JX et al., Optical Detection of [lambda]-Cyhalothrin by Core-Shell Fluorescent Molecularly Imprinted Polymers in Chinese Spirits.
Journal of Agricultural and Food Chemistry, 63, (9), 2392-2399, (2015)
   

Wei X et al., Swelling technique inspired synthesis of a fluorescent composite sensor for highly selective detection of bifenthrin.
RSC Advances, 5, (97), 79511-79518, (2015)
   

Wei X et al., A novel molecularly imprinted polymer thin film at surface of ZnO nanorods for selective fluorescence detection of para-nitrophenol.
RSC Advances, 5, (55), 44088-44095, (2015)
   

Wei X et al., Molecularly imprinted polymer nanospheres based on Mn-doped ZnS QDs via precipitation polymerization for room-temperature phosphorescence probing of 2, 6-dichlorophenol.
RSC Advances, 5, (26), 19799-19806, (2015)
   

Wei X et al., Highly-controllable imprinted polymer nanoshell at the surface of silica nanoparticles based room-temperature phosphorescence probe for detection of 2, 4-dichlorophenol.
Analytica Chimica Acta, 870, 83-91, (2015)
   

Wei X et al., Specific recognition and fluorescent determination of aspirin by using core-shell CdTe quantum dot-imprinted polymers.
Microchimica Acta, 182, (7-8), 1527-1534, (2015)
   

Wu Y et al., Accelerating the design of multi-component nanocomposite imprinted membranes by integrating a versatile metal-organic methodology with a mussel-inspired secondary reaction platform.
Green Chemistry, 17, (6), 3338-3349, (2015)
   

Wu YL et al., Bio-inspired adhesion: fabrication and evaluation of molecularly imprinted nanocomposite membranes by developing a "bio-glue" imprinted methodology.
RSC Advances, 5, (57), 46146-46157, (2015)
   

Wu YL et al., Bio-inspired adhesion: Fabrication of molecularly imprinted nanocomposite membranes by developing a hybrid organic-inorganic nanoparticles composite structure.
Journal of Membrane Science, 490, 169-178, (2015)
   

Wu YL et al., A Multiple-Functional Ag/SiO2/Organic Based Biomimetic Nanocomposite Membrane for High-Stability Protein Recognition and Cell Adhesion/Detachment.
Advanced Functional Materials, 25, (36), 5823-5832, (2015)
   

Xu WZ et al., Synthesis and Characterization of a Magnetic Molecularly Imprinted Polymer by Suspension Polymerization for Selective Recognition of Dibenzothiophene from Gasoline Samples.
Adsorption Science & Technology, 33, (9), 819-830, (2015)
   

Yu P et al., Magnetic imprinted nanomicrosphere attached to the surface of bacillus using miniemulsion polymerization for selective recognition of 2, 4, 6-trichlorophenol from aqueous solutions.
Journal of Industrial and Engineering Chemistry, 29, 349-358, (2015)
   

Yu P et al., Selective removal of 2, 4-dichlorophenol in aqueous solutions by nanoparticles modified yeast using miniemulsion imprinting polymerization.
Journal of Environmental Chemical Engineering, 3, (2), 797-806, (2015)
   

Yu P et al., Preparation and characterization of molecularly-imprinted magnetic microspheres for adsorption of 2, 4, 6-trichlorophenol from aqueous solutions.
Korean Journal of Chemical Engineering, 32, (4), 767-776, (2015)
   

Yu P et al., Magnetic Molecularly Imprinted Polymer Beads Obtained by Suspension Polymerization for the Adsorption of 2, 4, 6-Trichlorophenol from an Aqueous Solution in a Fixed-bed Column.
Adsorption Science & Technology, 33, (3), 321-336, (2015)
   

Zheng XD et al., Silica nanoparticles doped with a europium(III) complex and coated with an ion imprinted polymer for rapid determination of copper(II).
Microchimica Acta, 182, (3-4), 753-761, (2015)
   

Zhou WC et al., Preparation and Performance of a Novel Magnetic Imprinted TiO2 Photocatalyst.
Nanoscience and Nanotechnology Letters, 7, (8), 678-684, (2015)
   

Zhu YZ et al., Facile synthesis of eggshell-stabilized erythromycin-based imprinted composites for recognition and separation applications.
RSC Advances, 5, (108), 89030-89040, (2015)
   

Zhu Z et al., Surface imprinting of a g-C3N4 photocatalyst for enhanced photocatalytic activity and selectivity towards photodegradation of 2-mercaptobenzothiazole.
RSC Advances, 5, (51), 40726-40736, (2015)
   

Cui JY et al., Bio-inspired synthesis of molecularly imprinted nanocomposite membrane for selective recognition and separation of artemisinin.
Journal of Applied Polymer Science, 133, (19), ArticleNo43405-(2016)
   

Dai JD et al., Novel pitaya-inspired well-defined core-shell nanospheres with ultrathin surface imprinted nanofilm from magnetic mesoporous nanosilica for highly efficient chloramphenicol removal.
Chemical Engineering Journal, 284, 812-822, (2016)
   

Gao L et al., Expeditious quantitative analysis of [lambda]-cyhalothrin depending on fluorescence quenching of fluorescent surface molecularly imprinted sensors.
Analytical Methods, 8, (11), 2434-2440, (2016)
   

Han WJ et al., A fluorescent molecularly imprinted polymer sensor synthesized by atom transfer radical precipitation polymerization for determination of ultra trace fenvalerate in the environment.
RSC Advances, 6, (84), 81346-81353, (2016)
   

Hao TF et al., An eco-friendly molecularly imprinted fluorescence composite material based on carbon dots for fluorescent detection of 4-nitrophenol.
Microchimica Acta, 183, (7), 2197-2203, (2016)
   

He JS et al., Magnetic organic-inorganic nanocomposite with ultrathin imprinted polymers via an in situ surface-initiated approach for specific separation of chloramphenicol.
RSC Advances, 6, (74), 70383-70393, (2016)
   

Li HJ et al., Rapid and sensitive detection of hemoglobin with gold nanoparticles based fluorescence sensor in aqueous solution.
Journal of Alloys and Compounds, 685, 820-827, (2016)
   

Liu Y et al., Selective separation of phenol from salicylic acid effluent over molecularly imprinted polystyrene nanospheres composite alumina membranes.
Chemical Engineering Journal, 286, 622-631, (2016)
   

Lu ZY et al., Specific oriented recognition of a new stable ICTX@Mfa with retrievability for selective photocatalytic degrading of ciprofloxacin.
Catalysis Science & Technology, 6, (5), 1367-1377, (2016)
   

Lu ZY et al., A novel hollow capsule-like recyclable functional ZnO/C/Fe3O4 endowed with three-dimensional oriented recognition ability for selectively photodegrading danofloxacin mesylate.
Catalysis Science & Technology, 6, (17), 6513-6524, (2016)
   

Ma P et al., A biomimetic Setaria viridis-inspired imprinted nanoadsorbent: green synthesis and application to the highly selective and fast removal of sulfamethazine.
RSC Advances, 6, (12), 9619-9630, (2016)
   

Mao YL et al., Fabrication of highly selective molecularly imprinted membranes for the selective adsorption of methyl salicylate from salicylic acid.
RSC Advances, 6, (94), 91659-91668, (2016)
   

Mao YL et al., Selective separation of bifenthrin by pH-sensitive/magnetic molecularly imprinted polymers prepared by pickering emulsion polymerization.
Fibers and Polymers, 17, (10), 1531-1539, (2016)
   

Pan JM et al., Hierarchical porous molecule/ion imprinted polymers with double specific binding sites: Combination of Pickering HIPEs template and pore-filled strategy.
Chemical Engineering Journal, 301, 210-221, (2016)
   

Sun J et al., Surface hydrophilic imprinted particles via a green precipitation polymerization for selective removal of tetracycline from aqueous solution.
Journal of the Iranian Chemical Society, 13, (3), 489-497, (2016)
   

Wang JX et al., Molecularly imprinted fluorescent hollow nanoparticles as sensors for rapid and efficient detection [lambda]-cyhalothrin in environmental water.
Biosensors and Bioelectronics, 85, 387-394, (2016)
   

Wang L et al., Determination of trace 2, 4-dichlorophenol in water by molecularly imprinted polymer fiber solid phase micro-extraction coupled with HPLC.
Chinese Journal of Analysis Laboratory, 35, (9), 1103-1109, (2016)
   

Wang YS et al., Enhanced selective photocatalytic properties of a novel magnetic retrievable imprinted ZnFe2O4/PPy composite with specific recognition ability.
RSC Advances, 6, (57), 51877-51887, (2016)
   

Wei X et al., Facile polymerizable surfactant inspired synthesis of fluorescent molecularly imprinted composite sensor via aqueous CdTe quantum dots for highly selective detection of [lambda]-cyhalothrin.
Sensors and Actuators B: Chemical, 224, 315-324, (2016)
   

Wu YL et al., A novel approach toward fabrication of porous molecularly imprinted nanocomposites with bioinspired multilevel internal domains: Application to selective adsorption and separation membrane.
Chemical Engineering Journal, 306, 492-503, (2016)
   

Xie AT et al., Hollow imprinted polymer nanorods with a tunable shell using halloysite nanotubes as a sacrificial template for selective recognition and separation of chloramphenicol.
RSC Advances, 6, (56), 51014-51023, (2016)
   

Yang L et al., Thermosensitive/magnetic molecularly imprinted polymers prepared by Pickering emulsion polymerization for selective separation of bifenthrin.
Desalination and Water Treatment, 57, (40), 18927-18938, (2016)
   

Yin YJ et al., Rationally designed hybrid molecularly imprinted polymer foam for highly efficient [lambda]-cyhalothrin recognition and uptake via twice imprinting strategy.
Chemical Engineering Journal, 286, 485-496, (2016)
   

Zheng XD et al., Efficient adsorption and separation of dysprosium from NdFeB magnets in an acidic system by ion imprinted mesoporous silica sealed in a dialysis bag.
Green Chemistry, 18, (18), 5031-5040, (2016)
   

Zheng XD et al., A lanthanide complex-based molecularly imprinted luminescence probe for rapid and selective determination of [lambda]-cyhalothrin in the environment.
New Journal of Chemistry, 40, (7), 6141-6147, (2016)
   

Zhu YZ et al., Fabrication of magnetic imprinted sorbents prepared by Pickering emulsion polymerization for adsorption of erythromycin from aqueous solution.
Journal of Environmental Chemical Engineering, 4, (3), 3570-3579, (2016)
   

Cui YH et al., Facile synthesis of imprinted submicroparticles blend polyvinylidene fluoride membranes at ambient temperature for selective adsorption of methyl p-hydroxybenzoate.
Korean Journal of Chemical Engineering, 34, (3), 600-608, (2017)
   

Li HJ et al., Thermo-responsive molecularly imprinted sensor based on the surface-enhanced Raman scattering for selective detection of R6G in the water.
Dalton Transactions, 46, (34), 11282-11290, (2017)
   

Li HJ et al., A high performance and highly-controllable core-shell imprinted sensor based on the surface-enhanced Raman scattering for detection of R6G in water.
Journal of Colloid and Interface Science, 501, 86-93, (2017)
   

Li HJ et al., Preparation of a self-cleanable molecularly imprinted sensor based on surface-enhanced Raman spectroscopy for selective detection of R6G.
Analytical and Bioanalytical Chemistry, 409, (19), 4627-4635, (2017)
   

Li HJ et al., A thin shell and "sunny shape" molecular imprinted fluorescence sensor in selective detection of trace level pesticides in river.
Journal of Alloys and Compounds, 705, 524-532, (2017)
   

Li HJ et al., A high-performance SERS-imprinted sensor doped with silver particles of different surface morphologies for selective detection of pyrethroids in rivers.
New Journal of Chemistry, 41, (23), 14342-14350, (2017)
   

Lu ZY et al., Construction of stable core-shell imprinted Ag-(poly-o-phenylenediamine)/CoFe2O4 photocatalyst endowed with the specific recognition capability for selective photodegradation of ciprofloxacin.
RSC Advances, 7, (77), 48894-48903, (2017)
   

Ma W et al., Core-shell thermal-responsive and magnetic molecularly imprinted polymers based on mag-yeast for selective adsorption and controlled release of tetracycline.
Journal of the Iranian Chemical Society, 14, (1), 209-219, (2017)
   

Meng MJ et al., Fabrication of submicrosized imprinted spheres attached polypropylene membrane using "two-dimensional" molecular imprinting method for targeted separation.
Adsorption Science & Technology, 35, (1-2), 162-177, (2017)
   

Qiu H et al., A precise and efficient detection of Beta-Cyfluthrin via fluorescent molecularly imprinted polymers with allyl fluorescein as functional monomer in agricultural products.
Food Chemistry, 217, 620-627, (2017)
   

Shao HH et al., An ion-imprinted material embedded carbon quantum dots for selective fluorometric determination of lithium ion in water samples.
Microchimica Acta, 184, (12), 4861-4868, (2017)
   

Sun DS et al., Fabrication of highly selective ion imprinted macroporous membranes with crown ether for targeted separation of lithium ion.
Separation and Purification Technology, 175, 19-26, (2017)
   

Wu XL et al., Surface molecular imprinted polymers based on Mn-doped ZnS quantum dots by atom transfer radical polymerization for a room-temperature phosphorescence probe of bifenthrin.
Analytical Methods, 9, (31), 4609-4615, (2017)
   

Wu YL et al., Accelerating the design of gold/polymers/silica-based imprinted nanocomposite for light-triggered recognition and separation of biomolecules.
Chemical Engineering Journal, 307, 621-630, (2017)
   

Wu YL et al., Facile bio-functionalized design of thermally responsive molecularly imprinted composite membrane for temperature-dependent recognition and separation applications.
Chemical Engineering Journal, 309, 98-107, (2017)
   

Wu YL et al., Bioinspired synthesis of pDA/SiO2-based porous ciprofloxacin-imprinted nanocomposite membrane by a polydopamine-assisted organic-inorganic method.
Chemical Engineering Journal, 309, 263-271, (2017)
   

Wu YL et al., Bioinspired synthesis of high-performance nanocomposite imprinted membrane by a polydopamine-assisted metal-organic method.
Journal of Hazardous Materials, 323, (Part B), 663-673, (2017)
   

Yu XP et al., Fouling Resistant CA/PVA/TiO2 Imprinted Membranes for Selective Recognition and Separation Salicylic Acid from Waste Water.
Frontiers in Chemistry, 5, ArticleNo2-(2017)
   

Zhang YF et al., SiO2-MIP core-shell nanoparticles containing gold nanoclusters for sensitive fluorescence detection of the antibiotic erythromycin.
Microchimica Acta, 184, (7), 2241-2248, (2017)
   

Zhao J et al., Molecularly imprinted nanocomposite membranes based on GO/PVDF blended membranes with an organic-inorganic structure for selective separation of norfloxacin.
New Journal of Chemistry, 41, (24), 14966-14976, (2017)
   

Zheng XD et al., Selective adsorption and separation of gadolinium with three-dimensionally interconnected macroporous imprinted chitosan films.
Cellulose, 24, (2), 977-988, (2017)
   

Zheng XD et al., Efficient Recovery of Neodymium in Acidic System by Free-Standing Dual-Template Docking Oriented Ionic Imprinted Mesoporous Films.
ACS Applied Materials & Interfaces, 9, (1), 730-739, (2017)
   

Zhu HJ et al., Ion/molecule imprinted polymers with double binding sites via twice imprinting strategy for selective and simultaneous removal of [lambda]-cyhalothrin and Cu(II).
Journal of Industrial and Engineering Chemistry, 49, 198-207, (2017)
   

Chen L et al., Direct Detection of Potential Pyrethroids in Yangtze River via an Imprinted Multilayer Phosphorescence Probe.
Analytical Sciences, 34, (5), 613-618, (2018)
   

Cui JY et al., Synthesis of cauliflower-like ion imprinted polymers for selective adsorption and separation of lithium ion.
New Journal of Chemistry, 42, (17), 14502-14509, (2018)
   

Cui JY et al., Fabrication of lithium ion imprinted hybrid membranes with antifouling performance for selective recovery of lithium.
New Journal of Chemistry, 42, (1), 118-128, (2018)
   

Gao J et al., Bioinspired synthesis of multi-walled carbon nanotubes based enoxacin-imprinted nanocomposite membranes with excellent antifouling and selective separation properties.
Journal of the Taiwan Institute of Chemical Engineers, 91, 468-480, (2018)
   

Li HJ et al., High-performance composite imprinted sensor based on the surface enhanced Raman scattering for selective detection of 2, 6-dichlorophenol in water.
Journal of Raman Spectroscopy, 49, (2), 222-229, (2018)
   

Li HJ et al., A polydopamine-based molecularly imprinted polymer on nanoparticles of type SiO2@rGO@Ag for the detection of [lambda]-cyhalothrin via SERS.
Microchimica Acta, 185, (3), 193-(2018)
   

Liu JX et al., A versatile strategy to fabricate dual-imprinted porous adsorbent for efficient treatment co-contamination of [lambda]-cyhalothrin and copper(II).
Chemical Engineering Journal, 332, 517-527, (2018)
   

Lu J et al., Anti-fouling and thermosensitive ion-imprinted nanocomposite membranes based on grapheme oxide and silicon dioxide for selectively separating europium ions.
Journal of Hazardous Materials, 353, 244-253, (2018)
   

Lu J et al., Multilayered ion-imprinted membranes with high selectivity towards Li+ based on the synergistic effect of 12-crown-4 and polyether sulfone.
Applied Surface Science, 427, (Part A), 931-941, (2018)
   

Lu ZY et al., Facile microwave synthesis of a Z-scheme imprinted ZnFe2O4/Ag/PEDOT with the specific recognition ability towards improving photocatalytic activity and selectivity for tetracycline.
Chemical Engineering Journal, 337, 228-241, (2018)
   

Sun DS et al., Synthesis of ion imprinted nanocomposite membranes for selective adsorption of lithium.
Separation and Purification Technology, 194, 64-72, (2018)
   

Wang JX et al., Surface-imprinted fluorescence microspheres as ultrasensitive sensor for rapid and effective detection of tetracycline in real biological samples.
Sensors and Actuators B: Chemical, 263, 533-542, (2018)
   

Wang YY et al., Synthesis of molecularly imprinted dye-silica nanocomposites with high selectivity and sensitivity: Fluorescent imprinted sensor for rapid and efficient detection of [tau]-fluvalinate in vodka.
Journal of Separation Science, 41, (8), 1880-1887, (2018)
   

Wu CX et al., Fluorescent molecularly imprinted nanoparticles for selective and rapid detection of ciprofloxacin in aquaculture water.
Journal of Separation Science, 41, (19), 3782-3790, (2018)
   

Wu XL et al., Bioinspired synthesis of pDA@GO-based molecularly imprinted nanocomposite membranes assembled with dendrites-like Ag microspheres for high-selective adsorption and separation of ibuprofen.
Journal of Membrane Science, 553, 151-162, (2018)
   

Wu XL et al., Accelerating the design of molecularly imprinted nanocomposite membranes modified by Au@polyaniline for selective enrichment and separation of ibuprofen.
Applied Surface Science, 428, 555-565, (2018)
   

Wu YL et al., Bioinspired synthesis of SiO2/pDA-based nanocomposite-imprinted membranes with sol-gel imprinted layers for selective adsorption and separation applications.
Physical Chemistry Chemical Physics, 20, (23), 15775-15783, (2018)
   

Wu YL et al., Bioinspired Synthesis of Janus Nanocomposite-Incorporated Molecularly Imprinted Membranes for Selective Adsorption and Separation Applications.
ACS Sustainable Chemistry & Engineering, 6, (7), 9104-9112, (2018)
   

Wu YL et al., Bioinspired synthesis of multiple-functional nanocomposite platform showing optically and thermally responsive affinity: Application to environmentally responsive separation membrane.
Journal of Colloid and Interface Science, 531, 1-10, (2018)
   

Xu XC et al., A facile strategy toward ion-imprinted hierarchical mesoporous material via dual-template method for simultaneous selective extraction of lithium and rubidium.
Journal of Cleaner Production, 171, 264-274, (2018)
   

Zhang FS et al., A flexible imprinted photonic resin film templated by nanocrystalline cellulose for naked-eye recognition of sulfonamides.
Journal of Industrial and Engineering Chemistry, 58, 172-178, (2018)
   

Zhao J et al., Insights into high-efficiency molecularly imprinted nanocomposite membranes by channel modification for selective enrichment and separation of norfloxacin.
Journal of the Taiwan Institute of Chemical Engineers, 89, 198-207, (2018)
   

Zheng XD et al., Dual-template docking oriented ionic imprinted bilayer mesoporous films with efficient recovery of neodymium and dysprosium.
Journal of Hazardous Materials, 353, 496-504, (2018)
   

Cui JY et al., Facile synthesis of degradable CA/CS imprinted membrane by hydrolysis polymerization for effective separation and recovery of Li+.
Carbohydrate Polymers, 205, 492-499, (2019)
   

Gao J et al., One pot-economical fabrication of molecularly imprinted membrane employing carbon nanospheres sol coagulation bath with specific separation and advanced antifouling performances.
Separation and Purification Technology, 218, 59-69, (2019)
   

Liu XQ et al., A tailored molecular imprinting ratiometric fluorescent sensor based on red/blue carbon dots for ultrasensitive tetracycline detection.
Journal of Industrial and Engineering Chemistry, 72, 100-106, (2019)
   

Liu XQ et al., Constructing carbon dots and CdTe quantum dots multi-functional composites for ultrasensitive sensing and rapid degrading ciprofloxacin.
Sensors and Actuators B: Chemical, 289, 242-251, (2019)
   

Lu J et al., Antibacterial, high-flux and 3D porous molecularly imprinted nanocomposite sponge membranes for cross-flow filtration of emodin from analogues.
Chemical Engineering Journal, 360, 483-493, (2019)
   

Si ZH et al., Thermo-Responsive Molecularly Imprinted Hydrogels for Selective Adsorption and Controlled Release of Phenol From Aqueous Solution.
Frontiers in Chemistry, 6, Article674-(2019)
   

Sun LL et al., Molecularly imprinted Ag/Ag3VO4/g-C3N4 Z-scheme photocatalysts for enhanced preferential removal of tetracycline.
Journal of Colloid and Interface Science, 552, 271-286, (2019)
   

Wang MC et al., High-sensitive imprinted membranes based on surface-enhanced Raman scattering for selective detection of antibiotics in water.
Spectrochimica Acta Part A-Molecular and Biomolecular Spctroscopy, 222, Article117116-(2019)
   

Wu YL et al., Fabrication and evaluation of GO/TiO2-based molecularly imprinted nanocomposite membranes by developing a reformative filtering strategy: Application to selective adsorption and separation membrane.
Separation and Purification Technology, 212, 245-254, (2019)
   

Xu YQ et al., Preparation of functionalized double ratio fluorescent imprinted sensors for visual determination and recognition of dopamine in human serum.
Spectrochimica Acta Part A-Molecular and Biomolecular Spctroscopy, 219, 225-231, (2019)
   

Zheng XD et al., Selective extraction of gadolinium using free-standing imprinted mesoporous carboxymethyl chitosan films with high capacity.
Cellulose, 26, (2), 1209-1219, (2019)
   

Zheng XD et al., Dual-Functional Mesoporous Films Templated by Cellulose Nanocrystals for the Selective Adsorption of Lithium and Rubidium.
Journal of Chemical & Engineering Data, 64, (3), 926-933, (2019)
   

Zhu YZ et al., Convenient synthesis of uncovered imprinted microspheres by Ganoderma lucidum spore-stabilized pickering emulsion polymerization and their enhanced recognition of spiramycin.
RSC Advances, 9, (60), 34772-34783, (2019)
   

Dong ZQ et al., Antifouling molecularly imprinted membranes for pretreatment of milk samples: Selective separation and detection of lincomycin.
Food Chemistry, 333, Article127477-(2020)
   

Liu HB et al., Optical Recognition of Sulfamethoxazole by a Colored Chiral Nematic Imprinted Film.
Analytical Sciences, 36, (2), 221-226, (2020)
   

Wang WJ et al., Efficient fabrication of ratiometric fluorescence imprinting sensors based on organic-inorganic composite materials and highly sensitive detection of oxytetracycline in milk.
Microchemical Journal, 157, Article105053-(2020)
   

Xu YQ et al., Fluorescent polydopamine based molecularly imprinted sensor for ultrafast and selective detection of p-nitrophenol in drinking water.
Microchimica Acta, 189, (1), Article25-(2021)
   

Chen MN et al., Design of self-cleaning molecularly imprinted membrane with antibacterial ability for high-selectively separation of ribavirin.
Journal of Membrane Science, 642, Article119994-(2022)
   

Xu YQ et al., Molecularly imprinted polydopamine coated CdTe@SiO2 as a ratiometric fluorescent probe for ultrafast and visual p-nitrophenol monitoring.
Microchemical Journal, 172, Article106899-(2022)
   

Xu YQ et al., SiO2-coated molecularly imprinted sensor based on Si quantum dots for selective detection of catechol in river water.
Journal of Environmental Chemical Engineering, 10, (1), Article106850-(2022)
   

Yu C et al., Tailor-made double-face imprinted membrane with ultra-high specific surface area asymmetric structure through a connective method of dip-coating and delayed phase inversion for selective adsorption of cadmium ion.
Separation and Purification Technology, 280, Article119865-(2022)
   

Yan Z

Zhan J et al., Preparation of a semicovalent, molecularly surface imprinted polymer for the rapid determination of trace acid orange II in food and environmental samples.
Analytical and Bioanalytical Chemistry, 405, (19), 6353-6363, (2013)
   

Cheng Y et al., A molecularly imprinted polymer synthesized using [beta]-cyclodextrin as the monomer for the efficient recognition of forchlorfenuron in fruits.
Analytical and Bioanalytical Chemistry, 409, (21), 5065-5072, (2017)
   

Farooq S et al., Molecularly imprinted polymers' application in pesticide residue detection.
Analyst, 143, (17), 3971-3989, (2018)
   

Cheng Y et al., Synthesis and characterization of core-shell magnetic molecularly imprinted polymers for selective recognition and determination of quercetin in apple samples.
Food Chemistry, 287, 100-106, (2019)
   

Farooq S et al., Synthesis of core-shell magnetic molecularly imprinted polymer for the selective determination of imidacloprid in apple samples.
Journal of Separation Science, 42, (14), 2455-2465, (2019)
   

Liu YX et al., 2, 4-Dichlorophenol removal from water using an electrochemical method improved by a composite molecularly imprinted membrane/bipolar membrane.
Journal of Hazardous Materials, 377, 259-266, (2019)
   

Yan Z et al., Molecularly imprinted polymer based on upconversion nanoparticles for highly selective and sensitive determination of Ochratoxin A.
Journal of Central South University, 26, (3), 515-523, (2019)
   

Yu HL et al., Preparation of molecularly imprinted polymers coupled with high-performance liquid chromatography for the selective extraction of salidroside from Rhodiola crenulata.
Journal of Chromatography B, 1118-1119, 180-186, (2019)
   

Yan ZC

Li XT et al., Selective removal and persulfate catalytic decomposition of diethyl phthalate from contaminated water on modified MIL100 through surface molecular imprinting.
Chemosphere, 240, Article124875-(2020)
   

Xie YC et al., Targeted degradation of sulfamethoxazole in wastewater by molecularly imprinted MOFs in advanced oxidation processes: Degradation pathways and mechanism.
Chemical Engineering Journal, 429, Article132237-(2022)
   

Zeng C et al., Targeted degradation of TBBPA using novel molecularly imprinted polymer encapsulated C-Fe-Nx nanocomposite driven from MOFs.
Journal of Hazardous Materials, 424, Article127499-(2022)
   

Yan ZF

Zhang H et al., Preparing molecularly imprinted nanoparticles of saponins via cooperative imprinting strategy.
Journal of Separation Science, 43, (11), 2162-2171, (2020)
   

Yan ZH

Zhao DY et al., Development of a biomimetic enzyme-linked immunosorbent assay method based on a hydrophilic molecularly imprinted polymer film for determination of olaquindox in chick feed samples.
Journal of Immunoassay and Immunochemistry, 34, (1), 16-29, (2013)
   

Chen HC et al., L-lysine-structure-directed MIL-88A and its application in electrochemical sensing of cholylglycine via molecular imprinting technique.
Microchemical Journal, 158, Article105249-(2020)
   

Luo K et al., A sensitive and visual molecularly imprinted fluorescent sensor incorporating CaF2 quantum dots and [beta]-cyclodextrins for 5-hydroxymethylfurfural detection.
Analytica Chimica Acta, 1124, 113-120, (2020)
   

Ye JP et al., Molecularly imprinted ratiometric fluorescent probe for visual and fluorescent determination of aristolochic acid I based on a Schiff-base fluorescent compound.
Microchimica Acta, 187, (11), Article623-(2020)
   

Yan ZJ

Wei SL et al., Study of Melatonin Sensor Based on Molecular Imprinting Technique and Electropolymerization Membrane.
Chinese Journal of Analytical Chemistry, 40, (8), 1219-1224, (2012)
   

Wei SL et al., Preparation of Caffeine Molecularly Imprinted Polymers and Application on Solid Phase Extraction.
Chinese Journal of Analytical Chemistry, 40, (7), 1071-1075, (2012)
   

Wei SL et al., Study and Application of Acid Orange II Sensor Based on Molecularly Imprinted Electropolymerized Membrane.
Journal of Instrumental Analysis, 33, (6), 683-687, (2014)
   

Wei SL et al., Preparation and Application of Di(2-propylheptyl) Phthalate Molecularly Imprinted Solid-phase Extraction Sorbent.
Chinese Journal of Chromatography, 32, (5), 458-463, (2014)
   

Wei SL et al., Molecularly imprinted solid phase extraction coupled to high performance liquid chromatography for determination of aflatoxin M1 and B1 in foods and feeds.
RSC Advances, 5, (27), 20951-20960, (2015)
   

Yang YJ et al., Constructing synergistic groups in porous aromatic frameworks for the selective removal and recovery of lead(ii) ions.
Journal of Materials Chemistry A, 6, (12), 5202-5207, (2018)
   

Xie CS et al., Preparation of magnetic ion imprinted polymer with waste beer yeast as functional monomer for Cd(II) adsorption and detection.
RSC Advances, 9, (41), 23474-23483, (2019)
   

Yan ZQ

Chen W et al., Molecularly imprinted hollow sphere array for the sensing of proteins.
Journal of Biophotonics, 8, (10), 838-845, (2015)
   

Lu W et al., Visual detection of 2, 4, 6-trinitrotolune by molecularly imprinted colloidal array photonic crystal.
Journal of Hazardous Materials, 316, 87-93, (2016)
   

Lu W et al., Colorimetric sensor arrays based on pattern recognition for the detection of nitroaromatic molecules.
Journal of Hazardous Materials, 326, 130-137, (2017)
   

Yanai Y

Sode K et al., Construction of a molecular imprinting catalyst using target analogue template and its application for an amperometric fructosylamine sensor.
Biosensors and Bioelectronics, 18, (12), 1485-1490, (2003)
   

Yamazaki T et al., Molecular imprinting catalyst based artificial enzyme sensor for fructosylamines.
Analytical Letters, 36, (1), 75-89, (2003)
   

Sode K et al., Molecular recognition of fructosyl amine compounds by molecularly imprinted polymers.
Nippon Kagakkai Koen Yokoshu, 79, (2), 840-(2011)
   

Yanase H

Ohga K et al., Adsorption of Cu2+ or Hg2+ ion on resins prepared by cross-linking metal-complexed chitosans.
Bulletin of the Chemical Society of Japan, 60, (1), 444-446, (1987)
   

Yane T

Takeuchi T et al., Atrazine transformation using synthetic enzymes prepared by molecular imprinting.
Organic & Biomolecular Chemistry, 2, (18), 2563-2566, (2004)
   

Takeuchi T et al., Atrazine transformation using synthetic enzymes prepared by molecular imprinting (vol 2, pg 2563, 2004).
Organic & Biomolecular Chemistry, 2, (19), 2884-2884, (2004)
   

Yane T et al., Atrazine transforming polymer prepared by molecular imprinting with post-imprinting process.
Organic & Biomolecular Chemistry, 4, (24), 4469-4473, (2006)
   

Yane T et al., Artificial enzyme for atrazine decomposition prepared by molecular imprinting.
Polymer Preprints, Japan, 55, (2), 4806-(2006)
   

Yanez F

Alvarez-Lorenzo C et al., Imprinted soft contact lenses as norfloxacin delivery systems.
Journal of Controlled Release, 113, (3), 236-244, (2006)
   

Yang B

Yang B et al., Determination of rhodium by resonance light-scattering technique coupled with solid phase extraction using Rh(III) ion-imprinted polymers as sorbent.
Talanta, 105, 124-130, (2013)
   

He K et al., Highly selective recognition and fluorescent detection of JEV via virus-imprinted magnetic silicon microspheres.
Sensors and Actuators B: Chemical, 233, 607-614, (2016)
   

Yang B et al., Progress of Mimetic Enzymes and Their Applications in Chemical Sensors.
Critical Reviews in Analytical Chemistry, 46, (6), 469-481, (2016)
   

Yang B et al., A molecularly imprinted electrochemiluminescence sensor based on the mimetic enzyme catalytic effect for ultra-trace Ni2+ determination.
Analyst, 141, (20), 5822-5828, (2016)
   

Yang B et al., A resonance light scattering sensor based on bioinspired molecularly imprinted polymers for selective detection of papain at trace levels.
Analytica Chimica Acta, 912, 125-132, (2016)
   

Bao H et al., Bacteria-templated fabrication of a charge heterogeneous polymeric interface for highly specific bacterial recognition.
Chemical Communications, 53, (15), 2319-2322, (2017)
   

Yang B et al., A virus resonance light scattering sensor based on mussel-inspired molecularly imprinted polymers for high sensitive and high selective detection of Hepatitis A Virus.
Biosensors and Bioelectronics, 87, 679-685, (2017)
   

Li JP et al., Molecularly imprinted sensor based on Russian Matryoshka structured molecules for enhanced specific identification and double amplification in ultra-trace Tb3+ determination.
Biosensors and Bioelectronics, 109, 224-229, (2018)
   

Yang B et al., Frontiers in highly sensitive molecularly imprinted electrochemical sensors: Challenges and strategies.
TrAC Trends in Analytical Chemistry, 105, 53-7, (2018)
   

Zhong CJ et al., Current Progress of Nanomaterials in Molecularly Imprinted Electrochemical Sensing.
Critical Reviews in Analytical Chemistry, 48, (1), 15-32, (2018)
   

Xing JY et al., Fabrication of a photoelectric-sensitive imprinting polymer by PPy-cross-linked Gel/CS complex and its comprehensive treatment of Cr(VI).
Polymer Bulletin, 77, (2), 869-882, (2020)
   

Li XT et al., Targeted degradation of refractory organic compounds in wastewaters based on molecular imprinting catalysts.
Water Research, 203, Article117541-(2021)
   

Yang BC

Ji SL et al., Synthesis of molecularly imprinted polymer sorbents and application for the determination of aminoglycosides antibiotics in honey.
Journal of Chromatography A, 1313, 113-118, (2013)
   

Xia ZYY et al., Preparation and application of tilmicosin-templated magnetic surface molecularly imprinted polymer.
Chinese Journal of Chromatography, 37, (9), 932-938, (2019)
   

Yang BJ

Yang BJ et al., Synthesis of the artemisinin-imprinting polymers on silica surface and its adsorption behavior in supercritical CO2 fluid.
AIChE Journal, 57, (12), 3514-3521, (2011)
   

Yang BM

Xu ZG et al., Development of dummy template molecularly imprinted techniques in sample pretreatment.
Progress In Chemistry, 24, (8), 1592-1598, (2012)
   

Yang BW

Wang SS et al., Configurational Simulations and Theoretical Calculations of Molecularly Imprinted Polymers of Histamine and 2-(Trifluoromethyl)acrylic Acid Based on Computational Chemistry.
Journal of the Chinese Chemical Society, 64, (4), 434-439, (2017)
   

Yang BX

Yang BX et al., The Preparation of Bisphenol A Molecularly Imprinted Polymers and Its Pilot Application in Environmental Monitoring.
Henan Science, 25, (6), 1047-1051, (2007)
   

Yang BX et al., The Synthesis of Bisphenol A Molecularly Imprinted Polymers and Investigation of Its Binding Characteristics.
Journal of Nanjing University (Natural Sciences), 43, (4), 351-357, (2007)
   

Yang BX et al., Simultaneous Determination of 11 Aminoglycoside Residues in Honey, Milk, and Pork by Liquid Chromatography with Tandem Mass Spectrometry and Molecularly Imprinted Polymer Solid Phase Extraction.
Journal of AOAC International, 100, (6), 1869-1878, (2017)
   

Yang C

Wu Z et al., Direct and label-free detection of cholic acid based on molecularly imprinted photonic hydrogels.
Journal of Materials Chemistry, 18, (45), 5452-5458, (2008)
   

Wang Y et al., Development of a sensitive and selective kojic acid sensor based on molecularly imprinted polymer modified electrode in the lab-on-valve system.
Talanta, 85, (5), 2522-2527, (2011)
   

Yan H et al., Ionic liquid-mediated molecularly imprinted solid-phase extraction coupled with gas chromatography-electron capture detector for rapid screening of dicofol in vegetables.
Journal of Chromatography A, 1307, 21-26, (2013)
   

Yang C et al., Sample-Imprinted Polymer Potentially for Protein Depletion and Enrichment.
Analytical Chemistry Letters, 3, (1), 40-45, (2013)
   

Yang C et al., Synthesis and Application of a Polymer Imprinted by Pending Templates of Protein Molecules.
Journal of Instrumental Analysis, 32, (2), 249-252, (2013)
   

Yang C et al., Pending templates imprinted polymers - hypothesis, synthesis, adsorption, and chromatographic properties.
Electrophoresis, 34, (9-10), 1383-1389, (2013)
   

Yan HY et al., Ionic liquid molecularly imprinted polymers for application in pipette-tip solid-phase extraction coupled with gas chromatography for rapid screening of dicofol in celery.
Journal of Chromatography A, 1361, 53-59, (2014)
   

Yang C et al., Depletion of Chicken Egg White Proteins by Pending Templates Imprinted Polymers.
Chinese Journal of Analytical Chemistry, 42, (11), 1651-1655, (2014)
   

Wang J et al., Research Progress of the Molecularly Imprinted Cryogel.
Chinese Journal of Analytical Chemistry, 43, (11), 1777-1784, (2015)
   

Wang J et al., Research Progress of the Molecularly Imprinted Cryogel.
Chinese Journal of Analytical Chemistry, 43, (11), 1777-1784, (2015)
   

Yang C et al., Glyoxal-Urea-Formaldehyde Molecularly Imprinted Resin as Pipette Tip Solid-Phase Extraction Adsorbent for Selective Screening of Organochlorine Pesticides in Spinach.
Journal of Agricultural and Food Chemistry, 63, (43), 9650-9656, (2015)
   

Yang C et al., Extensive Imprinting Adaptability of Polyacrylamide-based Amphoteric Cryogels Against Protein Molecules.
Chinese Journal of Analytical Chemistry, 44, (9), 1322-1327, (2016)
   

Yang C et al., Charged groups synergically enhance protein imprinting in amphoteric polyacrylamide cryogels.
Journal of Applied Polymer Science, 133, (34), ArticleNo43851-(2016)
   

Tang XS et al., Synthesis of magnetic molecularly imprinted polymers with excellent biocompatibility for the selective separation and inhibition of testosterone in prostate cancer cells.
International Journal of Nanomedicine, 12, 2979-2993, (2017)
   

Yang C et al., Depletion of abundant human serum proteins by per se imprinted cryogels based on sample heterogeneity.
Proteomics, 17, (9), ArticleNo1600284-(2017)
   

Wang J et al., Preparation and Performance of an Estradiol Templated Magnetic Sphere of Molecularly Imprinted Cryogel.
Journal of the Brazilian Chemical Society, 29, (1), 2-10, (2018)
   

Yang C et al., Synthesis of Molecularly Imprinted Cryogels to Deplete Abundant Proteins from Bovine Serum.
Polymers, 10, (1), ArticleNo97-(2018)
   

Yang C et al., An ultra sensitive and selective impedance sensor based on protein-imprinted polymer.
Sensors and Actuators B: Chemical, 282, 818-823, (2019)
   

Yang C et al., Molecularly imprinted polymer based sensor directly responsive to attomole bovine serum albumin.
Talanta, 196, 402-407, (2019)
   

Yang XY et al., Dual Functional Molecular Imprinted Polymer-Modified Organometal Lead Halide Perovskite: Synthesis and Application for Photoelectrochemical Sensing of Salicylic Acid.
Analytical Chemistry, 91, (15), 9356-9360, (2019)
   

Cheng GH et al., A highly sensitive and selective method for the determination of ceftiofur sodium in milk and animal-origin food based on molecularly imprinted solid-phase extraction coupled with HPLC-UV.
Food Chemistry, 347, Article129013-(2021)
   

Sun PX et al., Determination of Glucose by a Molecular Capacitor Array Based Using a 3-(Acrylamido) Phenylboronic Acid Prepared Molecularly Imprinted Polyacrylamide Cryogel.
Analytical Letters, 54, (17), 2789-2800, (2021)
   

Yang HR et al., Site-imprinted hollow composites with integrated functions for ultra-efficient capture of hexavalent chromium from water.
Separation and Purification Technology, 284, Article120240-(2022)
   

Yang CC

Li W et al., Fabrication of Surface Protein-Imprinted Nanoparticles Using a Metal Chelating Monomer via Aqueous Precipitation Polymerization.
ACS Applied Materials & Interfaces, 7, (49), 27188-27196, (2015)
   

Yang CC et al., Synthesis of surface protein-imprinted nanoparticles endowed with reversible physical cross-links.
Biosensors and Bioelectronics, 75, 129-135, (2016)
   

Wang YM et al., Synthesis of thermo-responsive bovine hemoglobin imprinted nanoparticles by combining ionic liquid immobilization with aqueous precipitation polymerization.
Journal of Separation Science, 41, (3), 765-773, (2018)
   

Yang CF

Li XL et al., Fabrication of Polyether Sulfone Blend Imprinted Membranes for Selective Adsorption of p-hydroxybenzonic from Salicylic Acid.
Fibers and Polymers, 19, (5), 977-986, (2018)
   

Yang CH

Zhang HH et al., Progress of the Preparation of Molecularly Imprinted Polymers.
Hunan Agricultural Sciences, (6), 59-60, 63, (2007)
   

Lee MH et al., Molecularly imprinted electrochemical sensing of urinary melatonin in a microfluidic system.
Biomicrofluidics, 8, (5), Article No 054115-(2014)
   

Lee MH et al., Electrochemical sensing of urinary progesterone with molecularly imprinted poly(aniline-co-metanilic acid)s.
Journal of Materials Chemistry B, 4, (21), 3782-3787, (2016)
   

Lee MH et al., A multichannel system integrating molecularly imprinted conductive polymers for ultrasensitive voltammetric determination of four steroid hormones in urine.
Microchimica Acta, 186, (11), Article695-(2019)
   

Yang CH et al., Fluorometric determination of fipronil by integrating the advantages of molecularly imprinted silica and carbon quantum dots.
Microchimica Acta, 187, (1), Article12-(2019)
   

Chien HW et al., Interaction of LiYF4:Yb3+/Er3+/Ho3+/Tm3+@LiYF4:Yb3+ upconversion nanoparticles, molecularly imprinted polymers, and templates.
RSC Advances, 10, (59), 35600-35610, (2020)
   

Lee MH et al., Doping of transition metal dichalcogenides in molecularly imprinted conductive polymers for the ultrasensitive determination of 17[beta]-estradiol in eel serum.
Biosensors and Bioelectronics, 150, Article111901-(2020)
   

Lee MH et al., Epitope imprinting of alpha-synuclein for sensing in Parkinson's brain organoid culture medium.
Biosensors and Bioelectronics, 175, Article112852-(2021)
   

Lee MH et al., Transition metal dichalcogenides to optimize the performance of peptide-imprinted conductive polymers as electrochemical sensors.
Microchimica Acta, 188, (6), Article203-(2021)
   

Yang CJ

Ma JJ et al., Application of Molecularly Imprinted Polymers in Separation of Chiral Drugs and Determination of Medicines.
Chemical Industry Times, 18, (1), 5-8, (2004)
   

Yang CL

Guo LY et al., Analysis of sulfamerazine in pond water and several fishes by high-performance liquid chromatography using molecularly imprinted solid-phase extraction.
Analytical and Bioanalytical Chemistry, 391, (6), 2291-2298, (2008)
   

Yang CL et al., Synthesis and Properties of the Rhein Molecularly Imprinted Polymers.
Journal of Gansu Normal Colleges, (2), 33-36, (2013)
   

Wang L et al., Synthesis of mimic molecularly imprinted ordered mesoporous silica adsorbent by thermally reversible semicovalent approach for pipette-tip solid-phase extraction-liquid chromatography fluorescence determination of estradiol in milk.
Journal of Chromatography A, 1456, 58-67, (2016)
   

Han YH et al., Ionic Liquid-Hybrid Molecularly Imprinted Material-Filter Solid-Phase Extraction Coupled with HPLC for Determination of 6-Benzyladenine and 4-Chlorophenoxyacetic Acid in Bean Sprouts.
Journal of Agricultural and Food Chemistry, 65, (8), 1750-1757, (2017)
   

Yuan YN et al., Green synthesis of hydrophilic protein-imprinted resin with specific recognition of bovine serum albumin in aqueous matrix.
Analytica Chimica Acta, 1033, 213-220, (2018)
   

Yang CN

Yang CN et al., Signal-on

Yang CP

Dai H et al., An electrochemical impedimetric sensor based on biomimetic electrospun nanofibers for formaldehyde.
Analyst, 140, (2), 582-589, (2015)
   

Yang CX

Zhao KY et al., Preparation of bovine serum albumin-imprinted calcium polyacrylate/alginate hybrid microspheres via Ca2+ crosslinking.
Journal of Applied Polymer Science, 113, (2), 1133-1140, (2009)
   

Yang CY

Zhang MN et al., The synthesis and function research of the molecular imprinted polymer of cross-linking sulfhydryl chitosan by Pb2+ as template.
Journal of Hainan Normal University (Natural Science), 19, (3), 251-255, (2006)
   

Yang CY et al., Molecularly Imprinted On-line Solid-phase Extraction Combined with Flow Injection Chemiluminescence for Determination of Chlortetracycline.
Chinese Journal of Applied Chemistry, 24, (3), 273-277, (2007)
   

Yang CY et al., Molecularly imprinted on-line solid-phase extraction combined with chemiluminescence for the determination of pazufloxacin mesilate.
Microchimica Acta, 159, (3), 299-304, (2007)
   

Chen AH et al., The chemically crosslinked metal-complexed chitosans for comparative adsorptions of Cu(II), Zn(II), Ni(II) and Pb(II) ions in aqueous medium.
Journal of Hazardous Materials, 163, (2-3), 1068-1075, (2009)
   

Chang PP et al., Molecularly imprinted polymer-based chemiluminescence array sensor for the detection of proline.
Analytica Chimica Acta, 666, (1-2), 70-75, (2010)
   

Chen CY et al., Biosorption of Cu(II), Zn(II), Ni(II) and Pb(II) ions by cross-linked metal-imprinted chitosans with epichlorohydrin.
Journal of Environmental Management, 92, (3), 796-802, (2011)
   

Hwang MJ et al., Preparation of Molecularly Imprinted Polymers for the Detection of Aromatic Hydrocarbons.
Journal of Nanoscience and Nanotechnology, 11, (8), 7206-7209, (2011)
   

Yang CY et al., Synthesis and adsorption property of Cd(II) - 8-hydroxyquinoline molecularly imprinted polymer microspheres.
Environmental Science, 35, (6), 2223-2229, (2014)
   

Chang ZQ et al., Synthesis and study on adsorption property of congo red molecularly imprinted polymer nanospheres.
Environmental Science, 36, (7), 2564-2572, (2015)
   

Shu YQ et al., Synthesis and characterization of surface molecularly imprinted polymers of cloprop on graphite oxide.
Chinese Journal of Analysis Laboratory, 36, (3), 316-321, (2017)
   

Yang CZ

Tan YB et al., Electrochemical Determination of Bisphenol A Using a Molecularly Imprinted Chitosan-acetylene Black Composite Film Modified Glassy Carbon Electrode.
Electroanalysis, 28, (1), 189-196, (2016)
   

Yang D

Liu YW et al., Highly selective determination of inorganic mercury(II) after preconcentration with Hg(II)-imprinted diazoaminobenzene-vinylpyridine copolymers.
Analytica Chimica Acta, 538, (1-2), 85-91, (2005)
   

Zhai YH et al., Selective enrichment of trace copper(II) from biological and natural water samples by SPE using ion-imprinted polymer.
Journal of Separation Science, 31, (6-7), 1195-1200, (2008)
   

Fan WJ et al., Application of core-satellite polydopamine-coated Fe3O4 nanoparticles-hollow porous molecularly imprinted polymer combined with HPLC-MS/MS for the quantification of macrolide antibiotics.
Analytical Methods, 13, (11), 1412-1421, (2021)
   

Yang DD

Yang DD et al., Synthesis and Characterization of a Molecularly Imprinted Polymer for Preconcentration of Clothianidin in Environmental Samples.
Analytical Letters, 47, (15), 2613-2627, (2014)
   

Yang DD et al., Determination of Three Neonicotinoid Pesticides Residues by High Performence Liquid Chromatography with Molecularly Imprinting Solid Phase Extraction.
Chinese Journal of Analytical Chemistry, 42, (6), 872-977, (2014)
   

Yang DH

Yang DH, The Synthesis and Adsorption Properties of Metal Ion imprinted Microspheres.
Journal of Taiyuan University of Technology, 30, (5), 502-504, (1999)
   

Yang DH et al., Proceeding, Molecular imprinting of cholesterols onto ultrathin films TiO2-gel containing [beta]-cyclodextrin, 
1564, (2002)
   

Lee SW et al., Regioselective imprinting of anthracenecarboxylic acids onto TiO2 gel ultrathin films: an approach to thin film sensor.
Sensors and Actuators B: Chemical, 104, (1), 35-42, (2005)
   

Yang DH et al., Facile fabrication of molecularly imprinted cavities in spin-coated TiO2 nanofilms.
Chemistry Letters, 34, (12), 1686-1687, (2005)
   

Mizutani N et al., Proceeding, Fabrication and Application of Enantioselective TiO2 Nanoflims by Molecular Imprinting, 
1249-1252, (2006)
   

Takahara N et al., Molecular imprinting of BPA in a [beta]-cyclodextrin/TiO2 gel ultrathin layers.
Nippon Kagakkai Koen Yokoshu, 86, (1), 582-(2006)
   

Yang DH et al., Design of highly efficient receptor sites by combination of cyclodextrin units and molecular cavity in TiO2 ultrathin layer.
Biosensors and Bioelectronics, 22, (3), 388-392, (2006)
   

Ju MJ et al., Landmine detection: Improved binding of 2, 4-dinitrotoluene in a g-CD/metal oxide matrix and its sensitive detection via a cyclic surface polarization impedance (cSPI) method.
Chemical Communications, (25), 2630-2632, (2007)
   

Yang DH et al., Enhanced sensor capability of juxtaposed b-cyclodextrin rings in TiO2 ultrathin matrix as determined by cyclic surface-polarization impedance measurement.
Sensors and Materials, 20, (4), 191-200, (2008)
   

Yang DH et al., Fabrication of glucose-sensitive TiO2 ultrathin films by molecular imprinting and selective detection of monosaccharides.
Sensors and Actuators B: Chemical, 130, (1), 379-385, (2008)
   

Yang DH et al., Simple method for the fabrication of 1-hydroxypyrene-imprinted TiO2 gel nanofilms.
Current Applied Physics, 9, (2, Supplement 1), e136-e139, (2009)
   

Lee SW et al., A Novel Mass-Sensitive Sensor Based on beta-Cyclodextrin-Anchored Bisphenol A-Imprinted TiO(2) Ultrathin Layers.
Sensors and Materials, 23, (4), 229-236, (2011)
   

Mizutani N et al., Remarkable enantioselectivity of molecularly imprinted TiO2 nano-thin films.
Analytica Chimica Acta, 694, (1-2), 142-150, (2011)
   

Araki K et al., Self-assembly and imprinting of macrocyclic molecules in layer-by-layered TiO2 ultrathin films.
Analytica Chimica Acta, 779, 72-81, (2013)
   

Yang DH et al., Molecularly imprinted titania microbeads for extraction of the metabolite 1-hydroxypyrene from urine prior to its determination by HPLC.
Microchimica Acta, 183, (5), 1601-1609, (2016)
   

Yang DH et al., An electrochemical nanofilm sensor for determination of 1-hydroxypyrene using molecularly imprinted receptors.
Journal of Industrial and Engineering Chemistry, 51, 106-112, (2017)
   

Yang DP

Bai XY et al., Hollow ZnS-CdS nanocage based photoelectrochemical sensor combined with molecularly imprinting technology for sensitive detection of oxytetracycline.
Biosensors and Bioelectronics, 168, Article112522-(2020)
   

Yang DS

Byun HS et al., Synthesis and characterization of high selective molecularly imprinted polymers for bisphenol A and 2, 4-dichlorophenoxyacetic acid by using supercritical fluid technology.
Polymer, 54, (2), 589-595, (2013)
   

Yang DY

He KC et al., Selective adsorption of L-TA/D-TA by [beta]-cyclodextrin derivative modified with l-tryptophan: Isotherm, kinetic and thermodynamics studies.
Journal of Industrial and Engineering Chemistry, 20, (4), 1293-1300, (2014)
   

Wang YY et al., Calix[4]arenes functionalized dual-imprinted mesoporous film for the simultaneous selective recovery of lithium and rubidium.
Applied Organometallic Chemistry, 32, (10), ArticleNoe4511-(2018)
   

Xu XC et al., A facile strategy toward ion-imprinted hierarchical mesoporous material via dual-template method for simultaneous selective extraction of lithium and rubidium.
Journal of Cleaner Production, 171, 264-274, (2018)
   

Xu JC et al., Simultaneous adsorption of Li(I) and Rb(I) by dual crown ethers modified magnetic ion imprinting polymers.
Applied Organometallic Chemistry, 33, (3), Article_e4778-(2019)
   

Yang E

Xia XX et al., Nanostructured Shell-Layer Artificial Antibody with Fluorescence-Tagged Recognition Sites for the Trace Detection of Heavy Metal Ions by Self-Reporting Microsensor Arrays.
ACS Applied Materials & Interfaces, 13, (48), 57981-57997, (2021)
   

Yang F

Hao MY et al., Review of Prepartion of Molecularly Imprinted Membrane.
Chinese Polymer Bulletin, (6), 8-14, (2007)
   

Yang CY et al., Molecularly imprinted on-line solid-phase extraction combined with chemiluminescence for the determination of pazufloxacin mesilate.
Microchimica Acta, 159, (3), 299-304, (2007)
   

Lin Z et al., Preparation and evaluation of a macroporous molecularly imprinted hybrid silica monolithic column for recognition of proteins by high performance liquid chromatography.
Journal of Chromatography A, 1216, (49), 8612-8622, (2009)
   

Lin Z et al., Organic-inorganic hybrid silica as supporting matrices for selective recognition of bovine hemoglobin via covalent immobilization.
Journal of Separation Science, 32, (22), 3980-3987, (2009)
   

Gai PP et al., Highly-sensitive ion selective electrode based on molecularly imprinted polymer particles for determination of tetracycline in aqueous samples.
Russian Journal of Electrochemistry, 47, (8), 940-947, (2011)
   

Liu HJ et al., Improvement of metal adsorption onto chitosan/Sargassum sp. composite sorbent by an innovative ion-imprint technology.
Water Research, 45, (1), 145-154, (2011)
   

Qi YT et al., A novel artificial metallocyclodextrins polymer: Synthesis and photoactive properties in imprinting of molecular recognition.
Inorganic Chemistry Communications, 70, 22-26, (2016)
   

Yang F et al., Preparation and application of a molecularly imprinted monolith for specific recognition of domoic acid.
Analytical and Bioanalytical Chemistry, 410, (6), 1845-1854, (2018)
   

He YY et al., A novel lead-ion-imprinted magnetic biosorbent: preparation, optimization and characterization.
Environmental Technology, 40, (4), 499-507, (2019)
   

Lu S et al., Sorption Properties of Ion-imprinted Seaweed-Chitosan Composite Adsorbents for Nickel Ions.
IOP Conference Series: Earth and Environmental Science, 295, (3), Article032070-(2019)
   

Wang CX et al., Fe3O4@C Core-Shell Carbon Hybrid Materials as Magnetically Separable Adsorbents for the Removal of Dibenzothiophene in Fuels.
ACS Omega, 4, (1), 1652-1661, (2019)
   

Yang FF

Cai XQ et al., Novel Pb2+ Ion Imprinted Polymers Based on Ionic Interaction via Synergy of Dual Functional Monomers for Selective Solid-Phase Extraction of Pb2+ in Water Samples.
ACS Applied Materials & Interfaces, 6, (1), 305-313, (2014)
   

Zhang Z et al., Uniform core-shell molecularly imprinted polymers: a correlation study between shell thickness and binding capacity.
RSC Advances, 4, (60), 31507-31514, (2014)
   

Yang FF et al., Molecularly Imprinted Mesoporous SBA-15 Synthesized by Surface-Initiated Atom Transfer Radical Polymerization for Bisphenol A Recognition.
Chromatographia, 78, (1-2), 45-54, (2015)
   

Yang FF et al., An artificial receptor synthesized by surface-confined imprinting for the recognition of acetylation on histone H4 K16.
Chemical Communications, 51, (36), 7673-7676, (2015)
   

Hu XL et al., Novel surface dummy molecularly imprinted silica as sorbent for solid-phase extraction of bisphenol A from water samples.
Talanta, 148, 29-36, (2016)
   

Yang X et al., A molecularly imprinted polymer as an antibody mimic with affinity for lysine acetylated peptides.
Journal of Materials Chemistry B, 4, (5), 920-928, (2016)
   

Wang XH et al., Green synthesis of water-compatible and thermo-responsive molecularly imprinted nanoparticles.
European Polymer Journal, 92, 174-184, (2017)
   

Yang FF et al., Preparation of an epitope-imprinted polymer with antibody-like selectivity for [beta]2-microglobulin and application in serum sample analysis with a facile method of on-line solid-phase extraction coupling with high performance liquid chromatography.
Journal of Chromatography A, 1494, 18-26, (2017)
   

Wang X et al., A polyhedral oligomeric silsesquioxane/molecular sieve codoped molecularly imprinted polymer for gastroretentive drug-controlled release in vivo.
Biomaterials Science, 6, (12), 3170-3177, (2018)
   

Yang FF et al., Enhanced molecular recognition for imprinted monolithic column containing polyhedral oligomeric silsesquioxanes by dendritic effect of mesoporous molecular sieve scaffolds.
Analytical and Bioanalytical Chemistry, 410, (21), 5183-5193, (2018)
   

Yang FQ

Fu QF et al., Enhancement of enantioselectivity in chiral capillary electrophoresis using hydroxypropyl-beta-cyclodextrin as chiral selector under molecular crowding conditions induced by dextran or dextrin.
Electrophoresis, 35, (20), 2938-2945, (2014)
   

Tong LY et al., A novel lead ion-imprinted chelating nanofiber: Preparation, characterization, and performance evaluation.
Journal of Applied Polymer Science, 132, (8), Article No 41507-(2015)
   

Gao D et al., Molecularly imprinted polymer for the selective extraction of luteolin from Chrysanthemum morifolium Ramat.
Journal of Separation Science, 39, (15), 3002-3010, (2016)
   

Gao D et al., Molecularly imprinted polymers for the selective extraction of tiliroside from the flowers of Edgeworthia gardneri (wall.) Meisn.
Journal of Separation Science, 40, (12), 2629-2637, (2017)
   

Gao D et al., In Vivo Selective Capture and Rapid Identification of Luteolin and Its Metabolites in Rat Livers by Molecularly Imprinted Solid-Phase Microextraction.
Journal of Agricultural and Food Chemistry, 65, (6), 1158-1166, (2017)
   

Gao D et al., Preparation and evaluation of magnetic molecularly imprinted polymers for the specific enrichment of phloridzin.
Talanta, 178, 299-307, (2018)
   

Zhang JW et al., Simultaneous extraction of several targets by using non-toxic dual template molecularly imprinted polymers in vivo and in vitro.
Talanta, 219, Article121283-(2020)
   

Zhang JW et al., Extraction of activated epimedium glycosides in vivo and in vitro by using bifunctional-monomer chitosan magnetic molecularly imprinted polymers and identification by UPLC-Q-TOF-MS.
Talanta, 219, Article121350-(2020)
   

Yang G

Yang G et al., Adsorption isotherms on aminoantipyrine imprinted polymer stationary phase.
Chromatographia, 58, (1-2), 53-58, (2003)
   

Gul S et al., Fabrication of magnetic core shell particles coated with phenylalanine imprinted polymer.
Polymer Testing, 75, 262-269, (2019)
   

Yang GJ

Gao WH et al., Study on synthesis and adsorption property of molecularly imprinted polymer of semicarbazide.
Chemical Reagents, 32, (10), 886-888, 924, (2010)
   

Lai YX et al., Molecular Imprinting Polymers Electrochemical Sensor Based on AuNPs/PTh Modified GCE for Highly Sensitive Detection of Carcinomaembryonic Antigen.
Journal of Biomedical Nanotechnology, 14, (10), 1688-1694, (2018)
   

Lai YX et al., A novel [alpha]-fetoprotein-MIP immunosensor based on AuNPs/PTh modified glass carbon electrode.
Chinese Chemical Letters, 30, (1), 160-162, (2019)
   

Zhang XL et al., Study of ethosuximide detection using a novel molecularly imprinted electrochemiluminescence sensor based on tris(2, 2'-bipyridyl) ruthenium(II)@nitrogen doped graphene quantum dots.
Journal of Electroanalytical Chemistry, 874, Article114455-(2020)
   

Yang GL

Fan ZL et al., Investigation of Molecularly Imprinted Polymer Rod with Aminoantipyrine as Template by In-situ Polymerization Method and Their Separation Characteristics.
Chinese Journal of Chromatography, 21, (3), 199-201, (2003)
   

Wang DX et al., Caffeine molecular imprinted microgel spheres by precipitation polymerization.
Korean Journal of Chemical Engineering, 20, (6), 1073-1076, (2003)
   

Fan ZL et al., Aminoantipyrine imprinted column prepared by in-situ polymerization and investigation of binding character in aqueous medium.
Acta Chimica Sinica, 62, (12), 1176-1179, (2004)
   

Wu WX et al., Adsorption Characteristic of Triadimenol-imprinted Polymer.
Journal of Hebei University (Natural Science Edition), 24, (6), 615-618, (2004)
   

Yang GL et al., Chiral separation of nateglinide and its (L) enantiomer on a molecularly imprinted polymer-based stationary phase.
Chromatographia, 59, (11-12), 705-708, (2004)
   

Yin JF et al., Molecular recognition in in-situ nateglinide imprinted chiral stationary phase.
Acta Chimica Sinica, 62, (19), 1922-1926, (2004)
   

He JF et al., Preparation, characterization and properties studies of quinine-imprinted polymers in the aqueous phase.
Acta Scientiarum Naturalium Universitatis Sunyatseni, 44, (3), 58-62, (2005)
   

He JF et al., Synthesis and Properties of Quinine Imprinted Polymer Bound on Silica.
Chinese Journal of Applied Chemistry, 22, (11), 1161-1166, (2005)
   

Li L et al., Adsorption characteristic of acetaniprid-imprinted polymer.
Ion Exchange and Adsorption, 21, (2), 168-173, (2005)
   

Li ZW et al., Fast Separation of Nicotinamide and Nicotinic Acid with Molecularly Imprinted Monolithic Column.
Chinese Journal of Chromatography, 23, (6), 622-625, (2005)
   

Li ZW et al., Adsorption isotherms on nicotinamide-imprinted polymer stationary phase.
Journal of Chromatographic Science, 43, (7), 362-366, (2005)
   

Liu HY et al., Molecular recognition properties and adsorption isotherms of diniconaziole-imprinted polymers.
Journal of Liquid Chromatography & Related Technologies, 28, (15), 2315-2323, (2005)
   

Yin JF et al., Rapid and efficient chiral separation of nateglinide and its l-enantiomer on monolithic molecularly imprinted polymers.
Journal of Chromatography A, 1090, (1-2), 68-75, (2005)
   

Zhang GQ et al., In-situ polymerization of aminopyrine imprinted column and investigation of binding character in aqueous medium.
Chinese Journal of Analytical Chemistry, 33, (10), 1393-1396, (2005)
   

He JF et al., Preparation, characterization and properties studies of quinine-imprinted polymer in the aqueous phase.
Frontiers of Chemistry in China, 1, (2), 211-216, (2006)
   

Liu HY et al., Solid-phase extraction of trace diniconazole on imprinted polymers stationary phase.
Chemical Journal on Internet, 8, (9), Art. No.: 089056ne-(2006)
   

Wu WX et al., Characteristics of Molecular Recognition of Triadimefon Imprinting Polymer.
Journal of Hebei University (Natural Science Edition), 26, (4), 396-400, 404, (2006)
   

Wu WX et al., Study on the preparation and recognition property of molecular imprinted polymer of myclobutanil.
Physical Testing and Chemical Analysis Part B: Chemical Analysis, 42, (2), 77-79, (2006)
   

Yang GL et al., Synthesis and Evaluation of Molecularly Imprinted Polymer of Paclobutrazol.
Journal of Hebei University (Natural Science Edition), 26, (3), 262-265, (2006)
   

Yang GL et al., Chromatographic characterization and solid-phase extraction on diniconazole-imprinted polymers stationary phase.
Reactive and Functional Polymers, 66, (5), 579-583, (2006)
   

Yin JF et al., Molecularly imprinted solid-phase extraction for rapid screening of mycophenolic acid in human plasma.
Journal of Chromatography B, 844, (1), 142-147, (2006)
   

Li L et al., Molecularly Imprinted Polymer as Stationary Phase in HPLC for the Separation and Recognition of Sulfamethoxazole.
Journal of Instrumental Analysis, 26, (3), 409-412, (2007)
   

Yan H et al., Water-compatible molecularly imprinted polymers for selective extraction of ciprofloxacin from human urine.
Talanta, 75, (1), 227-232, (2008)
   

Zhang SJ et al., On-Line Preconcentration and Analysis of Metribuzin Residues in Corn Fields by Use of a Molecularly Imprinted Polymer.
Chromatographia, 69, (7), 615-619, (2009)
   

Yang GL et al., Application of Monolithic Stationary Phases in Solid-Phase Extraction and Pharmaceutical Analysis.
Current Pharmaceutical Analysis, 6, (3), 213-224, (2010)
   

Yin JF et al., Molecularly imprinted nanotubes for enantioselective drug delivery and controlled release.
Chemical Communications, 46, (41), 7688-7690, (2010)
   

Wang H et al., Determination of dicofol in aquatic products using molecularly imprinted solid-phase extraction coupled with GC-ECD detection.
Talanta, 85, (4), 2100-2105, (2011)
   

Yan HY et al., Molecularly imprinted solid-phase extraction combined with ultrasound-assisted dispersive liquid-liquid microextraction for the determination of four Sudan dyes in sausage samples.
Analyst, 136, (12), 2629-2634, (2011)
   

Yan HY et al., Application of molecularly imprinted solid-phase extraction on drug residues in animal source foods.
Chinese Journal of Chromatography, 29, (7), 572-579, (2011)
   

Yan HY et al., Molecularly imprinted matrix solid-phase dispersion combined with dispersive liquid-liquid microextraction for the determination of four Sudan dyes in egg yolk.
Journal of Chromatography A, 1218, (16), 2182-2188, (2011)
   

Yan HY et al., Miniaturized molecularly imprinted matrix solid-phase dispersion coupled with high performance liquid chromatography for rapid determination of auxins in orange samples.
Journal of Chromatography A, 1256, 1-8, (2012)
   

Yan HY et al., Dummy Molecularly Imprinted Solid-Phase Extraction for Selective Determination of Five Phthalate Esters in Plastic Bottled Functional Beverages.
Journal of Agricultural and Food Chemistry, 60, (22), 5524-5531, (2012)
   

Yan HY et al., Simultaneous determination of four plant hormones in bananas by molecularly imprinted solid-phase extraction coupled with high performance liquid chromatography.
Analyst, 137, (12), 2884-2890, (2012)
   

Han YH et al., Rapid determination of acyclovir in edible creatural tissues by molecularly imprinted matrix solid-phase dispersion coupled with high performance liquid chromatography.
Analytical Methods, 5, (13), 3285-3290, (2013)
   

Qiao JD et al., Dispersive Solid-Phase Extraction Based on Magnetic Dummy Molecularly Imprinted Microspheres for Selective Screening of Phthalates in Plastic Bottled Beverages.
Journal of Agricultural and Food Chemistry, 62, (13), 2782-2789, (2014)
   

Yang GM

Yang GM et al., Magnetic entrapment for fast and sensitive determination of metronidazole with a novel magnet-controlled glassy carbon electrode.
Electrochimica Acta, 135, 154-160, (2014)
   

Yang GM et al., Electrochemical determination of cefotaxime based on a three-dimensional molecularly imprinted film sensor.
Biosensors and Bioelectronics, 53, 447-452, (2014)
   

Yang GM et al., A novel electrochemical sensor for the determination of lidocaine based on surface-imprinting on porous three-dimensional film.
Journal of Materials Chemistry C, 2, (47), 10201-10208, (2014)
   

Yang GM et al., Molecularly imprinted polymer grown on multiwalled carbon nanotube surface for the sensitive electrochemical determination of amoxicillin.
Electrochimica Acta, 174, 33-40, (2015)
   

Yang GM et al., Electrochemical sensor for chloramphenicol based on novel multiwalled carbon nanotubes@molecularly imprinted polymer.
Biosensors and Bioelectronics, 64, 416-422, (2015)
   

Yang GM et al., Electrochemical sensor for dimetridazole based on novel gold nanoparticles@molecularly imprinted polymer.
Sensors and Actuators B: Chemical, 220, 1017-1022, (2015)
   

Yang GM et al., A Novel Photoelectrochemical Sensor for Thiamphenicol Based on Porous Three-Dimensional Imprinted Film.
International Journal of Electrochemical Science, 12, (7), 7272-7286, (2017)
   

Shi L et al., One-step Synthesis of Ultrasmall Platinum Nanoparticles Supported on Amino-Functionalized Graphene to Create an Electrochemical Molecularly Imprinted Polymer Sensor for Fluxapyroxad.
International Journal of Electrochemical Science, 16, Article210767-(2021)
   

Yang GQ

Yin JF et al., Molecularly imprinted solid-phase extraction for rapid screening of mycophenolic acid in human plasma.
Journal of Chromatography B, 844, (1), 142-147, (2006)
   

Song ZH et al., Chromatographic performance of zidovudine imprinted polymers coated silica stationary phases.
Talanta, 239, Article123115-(2022)
   

Yang H

Yang H et al., Thin, highly crosslinked polymer layer synthesized via photoinitiated graft copolymerization on a self-assembled-monolayer-coated gold surface.
Journal of Applied Polymer Science, 97, (1), 158-164, (2005)
   

Bing NC et al., Recognition properties of poly(vinylidene fluoride) hollow-fiber membranes modified by levofloxacin-imprinted polymers.
Journal of Applied Polymer Science, 106, (1), 71-76, (2007)
   

Shi XZ et al., Preparation and Chromatographic Evaluation of Molecularly Imprinted Polymer Microspheres for Chloramphenicol.
Food Science, 31, (18), 95-98, (2010)
   

Wang HF et al., Study on Enzyme Mimics of Molecularly Imprinted Microgels.
Chemical Journal of Chinese Universities, 31, (12), 2488-2493, (2010)
   

Wei S et al., Development of gold-nanoparticles embedded molecularly imprinted polymers for solid phase extraction of indomethacin.
Chemical Research and Application, 22, (3), 293-296, (2010)
   

Wang B et al., Preparation and characterization of molecularly imprinted microspheres for selective extraction of trace melamine from milk samples.
Microchimica Acta, 174, (1), 191-199, (2011)
   

Wang HF et al., Temperature-sensitive molecularly imprinted microgels with esterase activity.
SCIENCE CHINA Chemistry, 54, (3), 515-520, (2011)
   

Fu XW et al., Preparation and utilization of molecularly imprinted polymer for chlorsulfuron extraction from water, soil, and wheat plant.
Environmental Monitoring and Assessment, 184, (7), 4161-4170, (2012)
   

Qi XL et al., Development of a broad selective molecularly imprinted polymers-based solid phase extraction of contraceptive drug levonorgestrel from water samples.
International Journal of Environmental Analytical Chemistry, 92, (3), 268-278, (2012)
   

Qu JR et al., Synthesis and utilisation of molecular imprinting polymer for clean-up of propachlor in food and environmental media.
Food Chemistry, 135, (3), 1148-1156, (2012)
   

Zuo HG et al., Progresss of molecular imprinting technique on the determination of pesticides residues.
Journal of Nanjing Agricultural University, 35, (5), 175-182, (2012)
   

Guo LJ et al., Development of a molecularly imprinted polymer for prometryne clean-up in the environment.
Journal of Separation Science, 36, (24), 3911-3917, (2013)
   

Xie JQ et al., Synthesis and Application of Molecularly Imprinted Polymer on Selective Solid-Phase Extraction for the Determination of Artemisinin in Artemisia Annua L.
Analytical Letters, 46, (1), 107-119, (2013)
   

Xie JQ et al., Synthesis and application of a molecularly imprinted polymer as a filter to reduce polycyclic aromatic hydrocarbon levels in mainstream cigarette smoke.
Reactive and Functional Polymers, 73, (12), 1606-1611, (2013)
   

Miao SS et al., Preparation of Dufulin imprinted polymer on surface of silica gel and its application as solid-phase extraction sorbent.
Abstracts of Papers of the American Chemical Society, 248, (AGRO), 252-(2014)
   

Miao SS et al., Preparation of Dufulin imprinted polymer on surface of silica gel and its application as solid-phase extraction sorbent.
Environmental Science: Processes & Impacts, 16, (4), 932-941, (2014)
   

Yang H et al., Pharmacokinetic study of liquiritin in rat serum using molecularly imprinted solid-phase extraction combined with RP-HPLC.
Analytical Methods, 6, (5), 1563-1568, (2014)
   

Zheng XF et al., Synthesis of chitosan-gelatin molecularly imprinted membranes for extraction of l-tyrosine.
RSC Advances, 4, (80), 42478-42485, (2014)
   

Geng HR et al., A newly developed molecularly imprinted polymer on the surface of TiO2 for selective extraction of triazine herbicides residues in maize, water, and soil.
Analytical and Bioanalytical Chemistry, 407, (29), 8803-8812, (2015)
   

Jiang MJ et al., Synthesis of a Temperature-Sensitive Matrine-Imprinted Polymer and Its Potential Application for the Selective Extraction of Matrine from Radix Sophorae Tonkinensis.
International Journal of Molecular Sciences, 16, (2), 3441-3451, (2015)
   

Miao SS et al., Core-Shell Magnetic Molecularly Imprinted Polymers as Sorbent for Sulfonylurea Herbicide Residues.
Journal of Agricultural and Food Chemistry, 63, (14), 3634-3645, (2015)
   

Zheng XF et al., Correction: Synthesis of chitosan-gelatin molecularly imprinted membranes for extraction of l-tyrosine.
RSC Advances, 5, (3), 2038-2038, (2015)
   

Zuo HG et al., Preparation of malathion MIP-SPE and its application in environmental analysis.
Environmental Monitoring and Assessment, 187, (7), ArticleNo394-(2015)
   

Zheng XF et al., Surface Molecularly Imprinted Polymer of Chitosan Grafted Poly(methyl methacrylate) for 5-Fluorouracil and Controlled Release.
Scientific Reports, 6, ArticleNo21409-(2016)
   

Zheng XF et al., Preparation and characterization of temperature-memory nanoparticles of MIP-CS-g-PMMA.
RSC Advances, 6, (112), 110722-110732, (2016)
   

Wang L et al., A novel nanoenzyme based on Fe3O4 nanoparticles@thionine-imprinted polydopamine for electrochemical biosensing.
Sensors and Actuators B: Chemical, 253, 108-114, (2017)
   

Yang H et al., Determination of Tributyltin in Seafood Based on Magnetic Molecularly Imprinted Polymers Coupled with High Performance Liquid Chromatography-Inductively Coupled Plasma Mass Spectrometry.
Journal of Food Quality, 2017, ArticleNo7405475-(2017)
   

Yang H et al., Preparation of Ion-Imprinted Amino-Functionalized Nano-Porous Silica for Selective Removal of Heavy Metal Ions from Water Environment.
Journal of Nanoscience and Nanotechnology, 17, (9), 6818-6826, (2017)
   

Yang H et al., Molecularly imprinted electrochemical sensor based on bioinspired Au microflowers for ultra-trace cholesterol assay.
Biosensors and Bioelectronics, 92, 748-754, (2017)
   

Yang H et al., Determination of Trace Tributyltin in Seafood by Molecularly Imprinted Polymer and High Performance Liquid Chromatography-inductively Coupled Plasma Mass Spectrometry.
Modern Food Science and Technology, 33, (2), 243-249, (2017)
   

Zuo HG et al., Preparation of a novel RAM-MIP for selective solid-phase extraction and gas chromatography determination of heptachlor, endosulfan and their metabolite residues in pork.
Analytical Methods, 9, (42), 6009-6018, (2017)
   

Duan DD et al., Three-dimensional molecularly imprinted electrochemical sensor based on Au NPs@Ti-based metal-organic frameworks for ultra-trace detection of bovine serum albumin.
Electrochimica Acta, 261, 160-166, (2018)
   

Chen SJ et al., Preparation and application of magnetic molecular imprinted polymers for extraction of cephalexin from pork and milk samples.
Journal of Chromatography A, 1602, 124-134, (2019)
   

Chen SJ et al., A phosphorescent probe for cephalexin consisting of mesoporous thioglycolic acid-modified Mn:ZnS quantum dots coated with a molecularly imprinted polymer.
Microchimica Acta, 187, (1), Article40-(2019)
   

Duan DD et al., A three-dimensional conductive molecularly imprinted electrochemical sensor based on MOF derived porous carbon/carbon nanotubes composites and prussian blue nanocubes mediated amplification for chiral analysis of cysteine enantiomers.
Electrochimica Acta, 302, 137-144, (2019)
   

Yang H et al., Investigation on synthesis of ion-imprinted mesoporous adsorbents by using ultrasound- and microwave-assisted preparation and their dynamic adsorption properties on heavy metals.
Environmental Science and Pollution Research, 26, (11), 10987-10999, (2019)
   

Yang H et al., Synthesis of imprinted amino-functionalized mesoporous silica and their selective adsorption performance of Pb2+, Cu2+, and Zn2+.
Journal of Sol-Gel Science and Technology, 90, (3), 465-477, (2019)
   

Zuo HG et al., Synthesis of Molecularly Imprinted Polymer on Surface of TiO2 Nanowires and Assessment of Malathion and its Metabolite in Environmental Water.
Journal of Analytical Chemistry, 74, (10), 1039-1055, (2019)
   

He SN et al., Advances of molecularly imprinted polymers (MIP) and the application in drug delivery.
European Polymer Journal, 143, Article110179-(2021)
   

Yang H et al., Synthesis, performance, and application of molecularly imprinted membranes: A review.
Journal of Environmental Chemical Engineering, 9, (6), Article106352-(2021)
   

Yang HA

Yang HA et al., Surface hydrophilic modification with well-defined glycopolymer for protein imprinting matrix.
International Journal of Biological Macromolecules, 48, (3), 432-438, (2011)
   

Yang HC

Chou TC et al., Proceeding, Molecular imprinting and its applications in bio-molecular sensing and purification, 
785, (2005)
   

Zhang GK et al., Preparation of Roxarsone Imprinted Polymers and Its Application to Solid Phase Extraction.
Chinese Journal of Analytical Chemistry, 41, (9), 1401-1405, (2013)
   

Zhou T et al., Determination of azithromycin residue in pork using a molecularly imprinted monolithic microcolumn coupled to liquid chromatography with tandem mass spectrometry.
Journal of Separation Science, 39, (7), 1339-1346, (2016)
   

Yang HF

Wang F et al., Selectivity/Specificity Improvement Strategies in Surface-Enhanced Raman Spectroscopy Analysis.
Sensors, 17, (11), ArticleNo2689-(2017)
   

Wang ZW et al., In situ reduced silver nanoparticles embedded molecularly imprinted reusable sensor for selective and sensitive SERS detection of Bisphenol A.
Applied Surface Science, 457, 323-331, (2018)
   

Yang HH

Yang HH et al., Molecularly imprinted sol-gel nanotubes membrane for biochemical separations.
Journal of the American Chemical Society, 126, (13), 4054-4055, (2004)
   

Zhang SQ et al., Preparation of molecular imprinting sol-gel nanotubes membrane and its application to biochemical separations.
Chemical Journal of Chinese Universities, 25, (6), 1028-1030, (2004)
   

Li Y et al., Surface molecularly imprinted polymer nanowires used for protein recognition.
Chemical Journal of Chinese Universities, 26, (9), 1634-1636, (2005)
   

Yang HH et al., Surface molecularly imprinted nanowires for biorecognition.
Journal of the American Chemical Society, 127, (5), 1378-1379, (2005)
   

Li Y et al., Synthesis of magnetic molecularly imprinted polymer nanowires using a nanoporous alumina template.
Macromolecules, 39, (13), 4497-4499, (2006)
   

Li Y et al., Protein recognition via surface molecularly imprinted polymer nanowires.
Analytical Chemistry, 78, (1), 317-320, (2006)
   

Wang HJ et al., Template Synthesized Molecularly Imprinted Polymer Nanotube Membranes for Chemical Separations.
Journal of the American Chemical Society, 128, (50), 15954-15955, (2006)
   

Lu CH et al., Surface-Imprinted Core-Shell Nanoparticles for Sorbent Assays.
Analytical Chemistry, 79, (14), 5457-5461, (2007)
   

Yin XF et al., Discovery of Active Component of Alkaloid From Marine Microorgamism Using Molecularly Imprinted Technique.
Advances in Marine Science, 26, (2), 228-233, (2008)
   

Zhou WH et al., Preparation of molecularly imprinted polymer nano-films by controlled/living radical polymerization.
Journal of Fuzhou University (Natural Science Edition), 36, (2), 284-287, (2008)
   

Li Y et al., Grafting of molecularly imprinted polymers from the surface of silica gel particles via reversible addition-fragmentation chain transfer polymerization: A selective sorbent for theophylline.
Talanta, 79, (2), 141-145, (2009)
   

Lu CH et al., Bifunctional superparamagnetic surface molecularly imprinted polymer core-shell nanoparticles.
Journal of Materials Chemistry, 19, (8), 1077-1079, (2009)
   

Yang HH et al., Molecularly imprinted polymer as SPE sorbent for selective extraction of melamine in dairy products.
Talanta, 80, (2), 821-825, (2009)
   

Zhou WH et al., Synthesis of Melamine Molecularly Imprinted Polymer and Separation of Melamine in Milk Products.
Journal of Instrumental Analysis, 28, (6), 687-691, (2009)
   

Li LL et al., Synthesis of Domoic Acid Imprinted Polymer and Its Extraction Application.
Chinese Journal of Applied Chemistry, 27, (2), 132-136, (2010)
   

Li Y et al., Preparation of Molecularly Imprinted Polymer Films Modified Silica gel and its Extraction Application.
Chinese Journal of Applied Chemistry, 27, (1), 102-106, (2010)
   

Zhou WH et al., Mussel-inspired molecularly imprinted polymer coating superparamagnetic nanoparticles for protein recognition.
Journal of Materials Chemistry, 20, (4), 880-883, (2010)
   

Zhou WH et al., A quartz crystal microbalance sensor based on mussel-inspired molecularly imprinted polymer.
Biosensors and Bioelectronics, 26, (2), 585-589, (2010)
   

Zhou WH et al., Molecularly imprinted polymer for selective extraction of domoic acid from seafood coupled with high-performance liquid chromatographic determination.
Talanta, 84, (3), 777-782, (2011)
   

Lin Z et al., Synthesis of uniformly sized molecularly imprinted polymer-coated silica nanoparticles for selective recognition and enrichment of lysozyme.
Journal of Materials Chemistry, 22, (34), 17914-17922, (2012)
   

Lu CH et al., Sensing HIV related protein using epitope imprinted hydrophilic polymer coated quartz crystal microbalance.
Biosensors and Bioelectronics, 31, (1), 439-444, (2012)
   

Li YX et al., Molecularly imprinted fluorescent and colorimetric sensor based on TiO2@Cu(OH)2 nanoparticle autocatalysis for protein recognition.
Journal of Materials Chemistry B, 1, (9), 1256-1262, (2013)
   

Lin Z et al., One-pot preparation of a molecularly imprinted hybrid monolithic capillary column for selective recognition and capture of lysozyme.
Journal of Chromatography A, 1284, 8-16, (2013)
   

Lin ZA et al., Preparation of boronate-functionalized molecularly imprinted monolithic column with polydopamine coating for glycoprotein recognition and enrichment.
Journal of Chromatography A, 1319, 141-147, (2013)
   

Liu BQ et al., Au(III)-promoted magnetic molecularly imprinted polymer nanospheres for electrochemical determination of streptomycin residues in food.
Biosensors and Bioelectronics, 41, 551-556, (2013)
   

Xia ZW et al., Facile synthesis of polydopamine-coated molecularly imprinted silica nanoparticles for protein recognition and separation.
Biosensors and Bioelectronics, 47, 120-126, (2013)
   

Yang HH et al., Depletion of albumin and immunoglobulin G from human serum using epitope-imprinted polymers as artificial antibodies.
Journal of Biomedical Materials Research Part A, 101A, (7), 1935-1942, (2013)
   

Zhang XL et al., A facile approach for preparation of molecularly imprinted polymers layer on the surface of carbon nanotubes.
Talanta, 105, 403-408, (2013)
   

Zheng C et al., A Selective Artificial Enzyme Inhibitor Based on Nanoparticle-Enzyme Interactions and Molecular Imprinting.
Advanced Materials, 25, (41), 5922-5927, (2013)
   

Lin ZA et al., Synthesis of boronic acid-functionalized molecularly imprinted silica nanoparticles for glycoprotein recognition and enrichment.
Journal of Materials Chemistry B, 2, (6), 637-643, (2014)
   

Li YX et al., Synthesis and characterization of vinyl-functionalized magnetic nanofibers for protein imprinting.
Chemical Communications, 51, (1), 202-205, (2015)
   

Yang HL

Tong YJ et al., Preparation and Performance Research on Glutathione Molecularly Imprinted Polymers.
Chromatographia, 74, (5), 443-450, (2011)
   

Xin Y et al., Study on the Glutathione Molecularly Imprinted Polymers with Different Functional Monomers.
Acta Chimica Sinica, 70, (6), 803-811, (2012)
   

Pan GQ et al., Thermo-responsive molecularly imprinted nanogels for specific recognition and controlled release of proteins.
Soft Matter, 9, (14), 3840-3850, (2013)
   

Pan GQ et al., Thermo-Responsive Hydrogel Layers Imprinted with RGDS Peptide: A System for Harvesting Cell Sheets.
Angewandte Chemie International Edition, 52, (27), 6907-6911, (2013)
   

Pan GQ et al., Facile preparation of varisized thermo-responsive molecularly imprinted nanogels for specific recognition and controlled release of protein.
Journal of Controlled Release, 172, (1), e102-e103, (2013)
   

Liu LT et al., Visible-Light-Responsive Surface Molecularly Imprinted Polymer for Acyclovir through Chicken Skin Tissue.
ACS Applied Bio Materials, 1, (3), 845-852, (2018)
   

Chen MJ et al., A hollow visible-light-responsive surface molecularly imprinted polymer for the detection of chlorpyrifos in vegetables and fruits.
Food Chemistry, 355, Article129656-(2021)
   

Yang HM

Ge SG et al., One novel molecular imprinting nanowires chemiluminescence sensor: preparation and pendimethalin recognition.
Monatshefte für Chemie - Chemical Monthly, 146, (3), 493-499, (2015)
   

Peng SH et al., Analysis of imidacloprid residues in mango, cowpea and water samples based on portable molecular imprinting sensors.
PLoS ONE, 16, (9), Article_e0257042-(2021)
   

Peng SH et al., Smartphone-based molecularly imprinted sensors for rapid detection of thiamethoxam residues and applications.
PLoS ONE, 16, (11), Article_e0258508-(2021)
   

Yang HP

Yang HP et al., Entrapment of alkaloids within silver: from enantioselective hydrogenation to chiral recognition.
Chemical Communications, 50, (64), 8868-8870, (2014)
   

Shi L et al., One-step Synthesis of Ultrasmall Platinum Nanoparticles Supported on Amino-Functionalized Graphene to Create an Electrochemical Molecularly Imprinted Polymer Sensor for Fluxapyroxad.
International Journal of Electrochemical Science, 16, Article210767-(2021)
   

Yang HR

Yang HR et al., Site-imprinted hollow composites with integrated functions for ultra-efficient capture of hexavalent chromium from water.
Separation and Purification Technology, 284, Article120240-(2022)
   

Yang HY

Li M et al., Synthesis and characterization of a surface-grafted Cd(II) ion-imprinted polymer for selective separation of Cd(II) ion from aqueous solution.
Applied Surface Science, 332, 463-472, (2015)
   

Yang HY et al., Potentiometric Langmuir Isotherm Analysis of Histamine-Selective Molecularly Imprinted Polymer-Based Field-Effect Transistor.
ECS Journal of Solid State Science and Technology, 7, (7), Q3079-Q3082, (2018)
   

Zhao W et al., Preparation of molecularly imprinted polymer/Au nanohybrids as an effective biosensing material.
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 555, 95-102, (2018)
   

Chen Q et al., Preparation and evaluation of magnetic graphene oxide molecularly imprinted polymers (MIPs-GO-Fe3O4@SiO2) for the analysis and separation of tripterine.
Reactive and Functional Polymers, 169, Article105055-(2021)
   

Yang J

Muralidharan S et al., Organized molecular self-assemblies for metal ion recognition.
Abstracts of Papers of the American Chemical Society, 222, U373-U374, (2001)
   

Yang J et al., A new molecularly imprinted polymer for solid-phase extraction of cotinine from human urine.
Chinese Chemical Letters, 16, (11), 1503-1506, (2005)
   

Zhu XL et al., Selective solid-phase extraction using molecularly imprinted polymer for the analysis of polar organophosphorus pesticides in water and soil samples.
Journal of Chromatography A, 1092, (2), 161-169, (2005)
   

Zhu XL et al., Molecularly imprinted polymer for monocrotophos and its binding characteristics for organophosphorus pesticides.
Annali di Chimica, 95, (11-12), 877-885, (2005)
   

Yang J et al., A new molecularly imprinted polymer for selective extraction of cotinine from urine samples by solid-phase extraction.
Analytical and Bioanalytical Chemistry, 384, (3), 761-768, (2006)
   

Zhu XL et al., Molecularly imprinted polymer membranes for substance-selective solid-phase extraction from aqueous solutions.
Journal of Applied Polymer Science, 101, (6), 4468-4473, (2006)
   

Zhu XL et al., Films coated with molecular imprinted polymers for the selective stir bar sorption extraction of monocrotophos.
Journal of Chromatography A, 1131, (1-2), 37-44, (2006)
   

Zhu XL et al., Spectroscopy study of molecular recognition of a molecular imprinted monocrotophos-specific polymer.
Spectroscopy and Spectral Analysis, 26, (10), 1817-1820, (2006)
   

Wu PJ et al., Rapid Removal of Template from Molecularly Imprinted Polymers by Accelerated Solvent Extraction.
Chinese Journal of Analytical Chemistry, 35, (4), 484-488, (2007)
   

Yang J et al., Spectroscopy and XPS studies on molecular recognition of a molecularly imprinted cotinine-specific polymer.
Spectroscopy and Spectral Analysis, 27, (6), 1152-1155, (2007)
   

Yang J et al., Selective hair analysis of nicotine by molecular imprinted solid-phase extraction: An application for evaluating tobacco smoke exposure.
Food and Chemical Toxicology, 45, (6), 896-903, (2007)
   

Yang J, Spectroscopy Studies on Molecular Recognition of a Molecularly Imprinted Nicotine -Specific Polymer.
Instrumentation Analysis Monitoring, (1), 26-28, (2007)
   

Liang FX et al., Accelerated solvent extraction and matrix solid phase dispersion using molecularly imprinted polymer for the analysis of monocrotophos in soil.
Asian Journal of Chemistry, 20, (5), 3954-3960, (2008)
   

Shen ZL et al., Study on the Binding Characteristic of Methamidophos-specific Molecularly Imprinted Polymer and the Interactions between Template and Monomers.
Journal of the Chinese Chemical Society, 55, (3), 587-593, (2008)
   

Hou CJ et al., Application of molecular imprinting technique in field of organophosphorus pesticide detection.
Transducer and Microsystem Technologies, 28, (4), 5-9, 14, (2009)
   

Shen ZL et al., Spectroscopy Study of Binding Mechanisms and Molecular Recognition of Methamidophos-Specific Moleculary Imprinted Polymer.
Spectroscopy and Spectral Analysis, 29, (1), 78-81, (2009)
   

Tang ZZ et al., Spectroscopy Study on Molecular Recognition of 1-Naphthalenamine Molecularly Imprinted Polymer.
Chinese Journal of Spectroscopy Laboratory, 27, (2), 761-765, (2010)
   

Qin PY et al., Characterization and selectivity studies of molecular imprinted membranes of Puerarin using scanning electron microscopy.
Scanning, 33, (1), 7-12, (2011)
   

Zhang YJ et al., Molecularly Imprinted Electrospinning Polyethersulfone Nano-Scale Fibers for the Binding and Recognition of Bisphenol A.
Separation Science and Technology, 46, (10), 1615-1620, (2011)
   

Du YF et al., Selective Solid Phase Extraction of Aromatic Amines in Mainstream Tobacco Smoke Solution Using Molecularly Imprinted Polymer.
Asian Journal of Chemistry, 24, (3), 1175-1178, (2012)
   

He CX et al., Preparation of sunset yellow sensor based on molecularly imprinting.
Journal of Liaoning Normal University (Natural Science Edition), 35, (1), 78-82, (2012)
   

Liu PX et al., Study on preparation and characters of BPA molecular imprinting adsorbent.
Material Science and Technology, 20, (1), 98-102, (2012)
   

Wei ZM et al., The preparation and adsorption properties of electrospun aramid nanofibers.
Journal of Polymer Science Part B: Polymer Physics, 50, (20), 1414-1420, (2012)
   

Yao L et al., Development, validation, and application of a liquid chromatography-tandem mass spectrometry method for the determination of 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol in human hair.
Analytical and Bioanalytical Chemistry, 404, (8), 2259-2266, (2012)
   

Liu BZ et al., Development of a Sensitive Method for the Determination of 4-(Methylnitrosamino)-1-(3-pyridyl)-1-butanol in Human Urine Using Solid-phase Extraction Combined with Ultrasound-assisted Dispersive Liquid-liquid Microextraction and LC-MS/MS Detection.
Journal of the Chinese Chemical Society, 60, (8), 1055-1061, (2013)
   

Shen W et al., Preparation and application of imprinted polymer for tetrabromobisphenol A using tetrachlorobisphenol A as the dummy template.
Analytical Methods, 5, (19), 5208-5214, (2013)
   

Wei FD et al., Molecularly Imprinted Nanosilica Solid-Phase Extraction for Bisphenol A in Fish Samples.
Food Analytical Methods, 6, (2), 415-420, (2013)
   

Wei FD et al., Synthesis of molecularly imprinted CdTe@SiO2 quantum dots for recognition of noradrenalin.
Abstracts of Papers of the American Chemical Society, 245, (ANYL), 304-(2013)
   

Zhang ZD et al., Synthesis and Solid Phase Extraction Performance Study of NNAL-specific Molecularly Imprinted Polymers Using Dummy Templates.
Chinese Journal of Chemical Physics, 26, (3), 361-368, (2013)
   

Gong YR et al., Preparation of Isoprocarb Surface Molecular-Imprinted Materials and Its Recognition Character.
Chinese Journal of Analytical Chemistry, 42, (1), 28-35, (2014)
   

Lei Y et al., Preparation of a stir bar coated with molecularly imprinted polymer and its application in analysis of dopamine in urine.
Journal of Pharmaceutical and Biomedical Analysis, 94, 118-124, (2014)
   

Ren YM et al., The selective binding character of a molecular imprinted particle for Bisphenol A from water.
Water Research, 50, 90-100, (2014)
   

Wei FD et al., Molecularly imprinted polymer based on CdTe@SiO2 quantum dots as a fluorescent sensor for the recognition of norepinephrine.
Analyst, 139, (22), 5785-5792, (2014)
   

Zhu XL et al., Selective Adsorption Behaviour of Mesoporous Silica SBA-15-N-Acetylcysteine Imprinted Polymer Based on Surface Molecular Imprinting Technique.
Asian Journal of Chemistry, 26, (19), 6461-6464, (2014)
   

Zhu XL et al., Determination of Acrolein-Derived 3-Hydroxypropylmercapturic Acid in Human Urine Using Solid-phase Extraction Combined with Molecularly Imprinted Mesoporous Silica and LC-MS/MS Detection.
Journal of the Chinese Chemical Society, 61, (2), 227-232, (2014)
   

Chen JX et al., Fabrication of High-Performance Magnetic Lysozyme-Imprinted Microsphere and Its NIR-Responsive Controlled Release Property.
ACS Applied Materials & Interfaces, 7, (51), 28606-28615, (2015)
   

Wang XX et al., Analysis of Chlorophenols in Seawater Samples by Molecular Imprinted Magnetic Composite-based Dispersive Solid Phase Extraction Coupled with Liquid Chromatography.
Journal of Instrumental Analysis, 34, (11), 1213-1219, (2015)
   

Zhu L et al., Determination of melamine in powdered milk by molecularly imprinted stir bar sorptive extraction coupled with HPLC.
Journal of Colloid and Interface Science, 454, 8-13, (2015)
   

Niu YL et al., Preparation of Tetracycline Surface Molecularly Imprinted Material for the Selective Recognition of Tetracycline in Milk.
Food Analytical Methods, 9, (8), 2342-2351, (2016)
   

Sun GY et al., Cost-effective imprinting combining macromolecular crowding and a dummy template for the fast purification of punicalagin from pomegranate husk extract.
Journal of Separation Science, 39, (10), 1963-1970, (2016)
   

Wei FD et al., Molecularly imprinted polymers on dual-color quantum dots for simultaneous detection of norepinephrine and epinephrine.
Sensors and Actuators B: Chemical, 229, 38-46, (2016)
   

Yang LT et al., Facile preparation of molecularly imprinted polypyrrole-graphene-multiwalled carbon nanotubes composite film modified electrode for rutin sensing.
Talanta, 161, 413-418, (2016)
   

Jia M et al., A strategy of improving the imprinting effect of molecularly imprinted polymer: Effect of heterogeneous macromolecule crowding.
Talanta, 175, 488-494, (2017)
   

Lu XL et al., Surface Molecular Imprinting on Silica-Coated CdTe Quantum Dots for Selective and Sensitive Fluorescence Detection of p-aminophenol in Water.
Journal of Fluorescence, 27, (1), 181-189, (2017)
   

Sun GY et al., Two-dimensional Wang C et al., Preparation of ionic liquid-mediated imprinted monolith for selective capture and purification of corilagin.
Journal of Chromatography B, 1041-1042, 98-103, (2017)
   

Yang J et al., Determination of leucomalachite green in fish using a novel MIP-coated QDs probe based on synchronous fluorescence quenching effect.
Sensors and Actuators B: Chemical, 252, 561-567, (2017)
   

Zhao LJ et al., Preparation of hydrophilic surface-imprinted ionic liquid polymer on multi-walled carbon nanotubes for the sensitive electrochemical determination of imidacloprid.
RSC Advances, 7, (8), 4704-4709, (2017)
   

Jia M et al., Improvement of imprinting effect of ionic liquid molecularly imprinted polymers by use of a molecular crowding agent.
Analytical and Bioanalytical Chemistry, 410, (2), 595-604, (2018)
   

Li LL et al., Preparation and Application of Bisphenol-A TiO2 Gel Molecularly Imprinted Electrochemical Sensor Based on the Sensitivity-Enhancement of Gold Nanoparticles.
Chinese Journal of Applied Chemistry, 35, (4), 484-490, (2018)
   

Sun YK et al., A strategy of utilizing Zn(II) as metallic pivot in room temperature ionic liquid to prepare molecularly imprinted polymers for compound with intramolecular hydrogen bonds.
Analytical and Bioanalytical Chemistry, 410, (2), 349-359, (2018)
   

Xie JJ et al., Preparation of nicotine surface molecularly imprinted polymers for selective solid-phase extraction of nicotine from zero-level refill liquids of electronic cigarettes.
Analytical Methods, 10, (29), 3637-3644, (2018)
   

Yang J et al., Detection of trace tetracycline in fish via synchronous fluorescence quenching with carbon quantum dots coated with molecularly imprinted silica.
Spectrochimica Acta Part A-Molecular and Biomolecular Spctroscopy, 190, 450-456, (2018)
   

Yang J et al., Detection of trace leucomalachite green with a nanoprobe of CdTe quantum dots coated with molecularly imprinted silica via synchronous fluorescence quenching.
New Journal of Chemistry, 42, (4), 2640-2648, (2018)
   

Yang J et al., Simultaneous detection of malachite and leucomalachite green based on dual template CdTe@MIP via normal and synchronous fluorescence quenching.
Dyes and Pigments, 155, 171-178, (2018)
   

Yang SM et al., A Molecularly Imprinted Polythionine-Modified Electrode Based on a Graphene-Gold Nanoparticle Composite (MIP/AuNPs/rGO/GCE) for the Determination of Thrombin.
International Journal of Electrochemical Science, 13, 9333-9345, (2018)
   

Sun YK et al., Cost-effective imprinting to minimize consumption of template in room-temperature ionic liquid for fast purification of chlorogenic acid from the extract of E. ulmoides leaves.
Analytical and Bioanalytical Chemistry, 411, (6), 1261-1271, (2019)
   

Wang YF et al., Fast screening of antibiotics in milk using a molecularly imprinted two-dimensional photonic crystal hydrogel sensor.
Analytica Chimica Acta, 1070, 97-103, (2019)
   

Yang J et al., Corrigendum to "Detection of trace tetracycline in fish via synchronous fluorescence quenching with carbon quantum dots coated with molecularly imprinted silica" [Spectrochim. Acta A Mol. Biomol. Spectrosc., 2018, 190: 450-456 (doi: 10.1016/j.saa.2017.09.066)].
Spectrochimica Acta Part A-Molecular and Biomolecular Spctroscopy, 206, 630-631, (2019)
   

Yang J et al., Molecularly imprinted polymer-decorated signal on-off ratiometric electrochemical sensor for selective and robust dopamine detection.
Biosensors and Bioelectronics, 135, 224-230, (2019)
   

Zhou YL et al., Potentiometric analysis of sialic acid with a flexible carbon cloth based on boronate affinity and molecularly imprinted polymers.
Analyst, 144, (21), 6432-6437, (2019)
   

He HL et al., Fluorescent turn-on assay of C-type natriuretic peptide using a molecularly imprinted ratiometric fluorescent probe with high selectivity and sensitivity.
Microchimica Acta, 187, (11), Article614-(2020)
   

Yang J et al., Improving performance of molecularly imprinted polymers prepared with template of low purity utilizing the strategy of macromolecular crowding.
Journal of Chromatography A, 1624, Article461155-(2020)
   

Zhang X et al., Improving imprinting effect by reducing sites embedding: Selective extraction of 1, 2, 3, 4, 6-penta-O-galloyl-[beta]-d-glucose from Paeonia lactiflora Pall by hydrophilic molecularly imprinted polymers based on macromonomer and metal ion pivot.
Microchemical Journal, 158, Article105140-(2020)
   

Chen SX et al., MXene/carbon nanohorns decorated with conductive molecularly imprinted poly(hydroxymethyl-3, 4-ethylenedioxythiophene) for voltammetric detection of adrenaline.
Microchimica Acta, 188, (12), Article420-(2021)
   

Jiang H et al., A self-driven PET chip-based imprinted electrochemical sensor for the fast detection of Salmonella.
Sensors and Actuators B: Chemical, 349, Article130785-(2021)
   

Zhao JH et al., A photoelectrochemical sensor based on Z-Scheme TiO2@Au@CdS and molecularly imprinted polymer for uric acid detection.
Microchimica Acta, 188, (6), Article188-(2021)
   

Yang JA

Huo PW et al., Molecular imprinting technology and its application in field of catalysis.
Chemical Reagents, 30, (6), 421-425, 448, (2008)
   

Yang JC

Kim JM et al., Quartz crystal microbalance (QCM) gravimetric sensing of theophylline via molecularly imprinted microporous polypyrrole copolymers.
Sensors and Actuators B: Chemical, 206, 50-55, (2015)
   

Yang JC et al., Lithographically patterned molecularly imprinted polymer for gravimetric detection of trace atrazine.
Sensors and Actuators B: Chemical, 216, 476-481, (2015)
   

Yang JC et al., Polymeric Colloidal Nanostructures Fabricated via Highly Controlled Convective Assembly and Their Use for Molecular Imprinting.
ACS Applied Materials & Interfaces, 8, (11), 7381-7389, (2016)
   

Kong S et al., Caffeine-imprinted conducting polymeric films with 2D hierarchical pore arrays prepared via colloidal mask-assisted electrochemical polymerization.
Sensors and Actuators B: Chemical, 260, 587-592, (2018)
   

Yang JC et al., Surface imprinted conducting polymer patterns electrochemically grown from gold pinhole arrays on 2D inverse silica opals and their effective use in aspartame detection.
Sensors and Actuators B: Chemical, 255, (Part 1), 463-470, (2018)
   

Aya GA et al., Replicated Pattern Formation and Recognition Properties of 2, 4-Dichlorophenoxyacetic Acid-Imprinted Polymers Using Colloidal Silica Array Molds.
Polymers, 11, (8), ArticleNo1332-(2019)
   

Oh DK et al., Molecular imprinting of polymer films on 2D silica inverse opal via thermal graft copolymerization for bisphenol A detection.
Sensors and Actuators B: Chemical, 323, Article128670-(2020)
   

Pan Y et al., Detection of organophosphorus compounds using a surface acoustic wave array sensor based on supramolecular self-assembling imprinted films.
Analytical Methods, 12, (17), 2206-2214, (2020)
   

Yang JC et al., Molecularly imprinted quartz crystal microbalance sensors with lithographically patterned frisbee-like pillar arrays for sensitive and selective detection of iprodione.
Sensors and Actuators B: Chemical, 320, Article128366-(2020)
   

Yang JC et al., Improving Surface Imprinting Effect by Reducing Nonspecific Adsorption on Non-Imprinted Polymer Films for 2, 4-D Herbicide Sensors.
Chemosensors, 9, (3), Article43-(2021)
   

Yang JC et al., Molecular imprinting of hemispherical pore-structured thin films via colloidal lithography for gaseous formaldehyde Gravimetric sensing.
Applied Surface Science, 570, Article151161-(2021)
   

Choi DY et al., Optimization and characterization of electrochemical protein Imprinting on hemispherical porous gold patterns for the detection of trypsin.
Sensors and Actuators B: Chemical, 350, Article130855-(2022)
   

Yang JF

Xiang GQ et al., A surface ion imprinted magnetic silica sorbent for the separation and determination of leaching silver in antibacterial food contact products.
Canadian Journal of Chemistry - Revue Canadienne de Chimie, 93, (6), 621-625, (2015)
   

Qian LW et al., Immobilization of BSA on ionic liquid functionalized magnetic Fe3O4 nanoparticles for use in surface imprinting strategy.
Talanta, 168, 174-182, (2017)
   

Qian LW et al., Zwitterionic polymer chain-assisted lysozyme imprinted core-shell carbon microspheres with enhanced recognition and selectivity.
Talanta, 217, Article121085-(2020)
   

Yang JF, Construction of molecularly imprinted electrochemical sensor and penicillin detection based on FeS2@C.
Journal of Materials, Processing and Design, 5, (1), 23-30, (2021)
   

Yang JH

Wang JS et al., Proceeding, Selective Adsorption of Uranium(VI) on U(VI) Ion-Imprinted Chitosan Composite Magnetic Microsphers, 
1714-1717, (2011)
   

Hu M et al., Rapid fabrication of molecularly imprinted polymer fibers for solid phase microextraction of bisphenol A.
Chinese Journal of Chromatography, 33, (2), 123-131, (2015)
   

Hu M et al., Fabrication of the Monolithic Fiber for the Solid Phase Micro-extraction of Malachite Green.
Journal of the Chinese Chemical Society, 62, (4), 305-310, (2015)
   

Wang JX et al., Optical Detection of [lambda]-Cyhalothrin by Core-Shell Fluorescent Molecularly Imprinted Polymers in Chinese Spirits.
Journal of Agricultural and Food Chemistry, 63, (9), 2392-2399, (2015)
   

Guo QJ et al., In-situ and controllable synthesis of graphene-gold nanoparticles/molecularly imprinted polymers composite modified electrode for sensitive and selective rutin detection.
Microchemical Journal, 158, Article105254-(2020)
   

Kou YC et al., Recyclable Magnetic MIP-Based SERS Sensors for Selective, Sensitive, and Reliable Detection of Paclobutrazol Residues in Complex Environments.
ACS Sustainable Chemistry & Engineering, 8, (38), 14549-14556, (2020)
   

Yang X et al., Synergistic effects of layer-by-layer films for highly selective and sensitive electrochemical detection of trans-resveratrol.
Food Chemistry, 338, Article127851-(2021)
   

Yang JJ

Huai QY et al., Molecular Imprinted Polymers as Chromatographic Stationary Phases for Molecular Recognition.
Journal of Instrumental Analysis, 20, (6), 84-89, (2001)
   

Liu Y et al., Grafting of Tilmicosin molecularly imprinted polymer on silica supports.
Chemical Research and Application, 18, (10), 1186-1188, (2006)
   

Yu ZR et al., Emodin voltammetric sensor based on molecularly imprinted polymer membrane-modified electrode using a multiple hydrogen bonds strategy.
Journal of Applied Polymer Science, 126, (4), 1344-1350, (2012)
   

Sun XL et al., Novel dummy molecularly imprinted polymers for matrix solid-phase dispersion extraction of eight fluoroquinolones from fish samples.
Journal of Chromatography A, 1359, 1-7, (2014)
   

Sun XL et al., Highly class-selective solid-phase extraction of bisphenols in milk, sediment and human urine samples using well-designed dummy molecularly imprinted polymers.
Journal of Chromatography A, 1360, 9-16, (2014)
   

Sun H et al., Solid-phase extraction based on a molecularly imprinted polymer for the selective determination of four benzophenones in tap and river water.
Journal of Separation Science, 38, (19), 3412-3420, (2015)
   

Yang JJ et al., Preparation of molecularly imprinted polymers using dummy template and the applications in selective solid-phase extraction of seven bisphenols from human urine, bovine serum and beer samples.
Chinese Journal of Chromatography, 33, (5), 468-474, (2015)
   

Yang JJ et al., Molecularly imprinted polymer microspheres prepared by Pickering emulsion polymerization for selective solid-phase extraction of eight bisphenols from human urine samples.
Analytica Chimica Acta, 872, 35-45, (2015)
   

Yang JJ et al., Novel sponge-like molecularly imprinted mesoporous silica material for selective isolation of bisphenol A and its analogues from sediment extracts.
Analytica Chimica Acta, 853, 311-319, (2015)
   

Sun H et al., Preparation of dummy-imprinted polymers by Pickering emulsion polymerization for the selective determination of seven bisphenols from sediment samples.
Journal of Separation Science, 39, (11), 2188-2195, (2016)
   

Yang JJ et al., A Phenolphthalein-Dummy Template Molecularly Imprinted Polymer for Highly Selective Extraction and Clean-Up of Bisphenol A in Complex Biological, Environmental and Food Samples.
Polymers, 10, (10), ArticleNo1150-(2018)
   

Yuan GY et al., A novel ion-imprinted polymer induced by the glycylglycine modified metal-organic framework for the selective removal of Co(II) from aqueous solutions.
Chemical Engineering Journal, 333, 280-288, (2018)
   

Sun XL et al., Preparation and evaluation of dummy-template molecularly imprinted polymer as a potential sorbent for solid phase extraction of imidazole fungicides from river water.
Journal of Chromatography A, 1586, 1-8, (2019)
   

Zhang XX et al., Dummy molecularly imprinted microspheres prepared by Pickering emulsion polymerization for matrix solid-phase dispersion extraction of three azole fungicides from fish samples.
Journal of Chromatography A, 1620, Article461013-(2020)
   

Yang JK

Cao XW et al., Optimization of the lipase imprinting with fat acid in silane matrix.
Applied Chemical Industry, 37, (7), 717-720, 724, (2008)
   

Cao XW et al., Improving esterification activity of Burkholderia cepacia lipase encapsulated in silica by bioimprinting with substrate analogues.
Process Biochemistry, 44, (2), 177-182, (2009)
   

Yan JY et al., Combined strategy for preparation of a bioimprinted Geotrichum sp. lipase biocatalyst effective in non-aqueous media.
Process Biochemistry, 44, (10), 1128-1132, (2009)
   

Yang JK et al., Combination of bioimprinting and silane precursor alkyls improved the activity of sol-gel-encapsulated lipase.
Enzyme and Microbial Technology, 46, (3-4), 257-261, (2010)
   

Sun RC et al., Book chapter, Application of Molecularly Imprinted Polymers in Purification and Separation for Epothilones, 
In: Advances in Applied Biotechnology, Zhang TC, Nakajima M (Eds.) Springer: Berlin, Heidelberg, Ch. 59, 571-580, (2015)
   

Yang JL

Lu FG et al., Flow injection chemiluminescence sensor using core-shell molecularly imprinted polymers as recognition element for determination of dapsone.
Analytical and Bioanalytical Chemistry, 404, (1), 79-88, (2012)
   

Liu X et al., Preparation of Cu(II)-imprinted nanofibers from co-electrospinning PVA and imprinting complex.
Chemical Research in Chinese Universities, 31, (6), 1062-1065, (2015)
   

Yang JL et al., Recent advances in analysis of phthalate esters in foods.
TrAC Trends in Analytical Chemistry, 72, 10-26, (2015)
   

Zhang ZR et al., Facile construction of a molecularly imprinted polymer-based electrochemical sensor for the detection of milk amyloid A.
Microchimica Acta, 187, (12), Article642-(2020)
   

Yang JM

Xu ZX et al., Determination of Trace Para Red Residues in Foods through On-Line Molecularly Imprinted Solid Phase Extraction Coupled with High-Performance Liquid Chromatography.
Journal of Food Science, 75, (1), C49-C54, (2010)
   

Wang ZH et al., Copper(II) determination by using carbon paste electrode modified with molecularly imprinted polymer.
Electrochimica Acta, 58, (1), 750-756, (2011)
   

Wang ZH et al., Preparation of an amperometric sensor for norfloxacin based on molecularly imprinted grafting photopolymerization.
Analytical and Bioanalytical Chemistry, 405, (8), 2525-2533, (2013)
   

Yang JN

Yang JN et al., Preferential catalytic ozonation of p-nitrophenol by molecularly imprinted Fe3O4/SiO2 core-shell magnetic composites.
Water Science & Technology, 69, (1), 170-176, (2014)
   

Yang JP

Yang JP et al., Coinduction of a Chiral Microenvironment in Polypyrrole by Overoxidation and Camphorsulfonic Acid for Electrochemical Chirality Sensing.
Analytical Chemistry, 90, (15), 9551-9558, (2018)
   

Zhao QQ et al., Single-Template Molecularly Imprinted Chiral Sensor for Simultaneous Recognition of Alanine and Tyrosine Enantiomers.
Analytical Chemistry, 91, (19), 12546-12552, (2019)
   

Yang JR

Liu X et al., Molecularly imprinted nanoparticles with nontailing peaks in capillary electrochromatography.
Journal of Chromatography A, 1264, 137-142, (2012)
   

Tang L et al., Macromolecular crowding of molecular imprinting: A facile pathway to produce drug delivery devices for zero-order sustained release.
International Journal of Pharmaceutics, 496, (2), 822-833, (2015)
   

Yang JT

Dong JW et al., Determination of malachite green in environmental water samples by spectrophotometry with molecularly imprinted solid phase extraction.
Journal of Food Safety and Quality, 4, (4), 1200-1206, (2013)
   

Yang JW

He QQ et al., Simultaneous determination of quinoxaline-1, 4-dioxides in feeds using molecularly imprinted solid-phase extraction coupled with HPLC.
Journal of Separation Science, 36, (2), 301-310, (2013)
   

Tang HZ et al., Preparation and Condition Optimization of Imprinted Microspheres of Ofloxacin.
Guangdong Chemical Industry, 40, (2), 5-6, (2013)
   

Tang YZ et al., Preparation of ractopamine molecularly imprinted polymers and its chromatographic characterization.
Chinese Journal of Analysis Laboratory, 32, (5), 15-19, (2013)
   

Zhang GK et al., Preparation of Roxarsone Imprinted Polymers and Its Application to Solid Phase Extraction.
Chinese Journal of Analytical Chemistry, 41, (9), 1401-1405, (2013)
   

Yang JW et al., Preparation of Cyproheptadine Imprinted Polymers and Its Application to Solid Phase Extraction.
Chinese Journal of Analytical Chemistry, 42, (6), 878-884, (2014)
   

Yang JW et al., Determination of cyproheptadine in feeds using molecularly imprinted solid-phase extraction coupled with HPLC.
Journal of Chromatography B, 990, 39-44, (2015)
   

Yang JX

Shi HG et al., Novel imprinted nanocapsule with highly enhanced hydrolytic activity for organophosphorus pesticide degradation and elimination.
European Polymer Journal, 72, 190-201, (2015)
   

Wang HP et al., A Novel Magnetic Cd(II) Ion-Imprinted Polymer as a Selective Sorbent for the Removal of Cadmium Ions from Aqueous Solution.
Journal of Inorganic and Organometallic Polymers and Materials, 29, (6), 1874-1885, (2019)
   

Yang JY

Pan MF et al., Reproducible Molecularly Imprinted Piezoelectric Sensor for Accurate and Sensitive Detection of Ractopamine in Swine and Feed Products.
Sensors, 18, (6), ArticleNo1870-(2018)
   

Luo LH et al., Fast and sensitive detection of Japanese encephalitis virus based on a magnetic molecular imprinted polymerGÇôresonance light scattering sensor.
Talanta, 202, 21-26, (2019)
   

Yang JY et al., A novel fluorescence molecularly imprinted sensor for Japanese encephalitis virus detection based on metal organic frameworks and passivation-enhanced selectivity.
Talanta, 212, Article120744-(2020)
   

Huang SQ et al., Highly sensitive molecular imprinted voltammetric sensor for resveratrol assay in wine via polyaniline/gold nanoparticles signal enhancement and polyacrylamide recognition.
Journal of Electroanalytical Chemistry, 895, Article115455-(2021)
   

Wang LY et al., Specific determination of HBV using a viral aptamer molecular imprinting polymer sensor based on ratiometric metal organic framework.
Microchimica Acta, 188, (7), Article221-(2021)
   

Yang K

Feng MX et al., Molecularly imprinted polymer-high performance liquid chromatography for the determination of tetracycline drugs in animal derived foods.
Food Control, 69, 171-176, (2016)
   

Wang GN et al., Molecularly imprinted polymer-based solid phase extraction combined high performance liquid chromatography for determination of fluoroquinolones in milk.
Analytical Methods, 8, (27), 5511-5518, (2016)
   

Yang K et al., Preparation of dual-template molecularly imprinted polymer coated stir bar based on computational simulation for detection of fluoroquinolones in meat.
Journal of Chromatography B, 1046, 65-72, (2017)
   

Yang KG

Yang KG et al., Molecularly imprinted polyethersulfone microspheres for the binding and recognition of bisphenol A.
Analytica Chimica Acta, 546, (1), 30-36, (2005)
   

Yang KG et al., Preparation and selective binding characterization of Bisphenol A imprinted polyethersulfone particles.
Journal of Applied Polymer Science, 106, (4), 2791-2799, (2007)
   

Yu BY et al., Effect of the template molecules and nonsolvent additives on the recognition property of molecular imprinted polyethersulfone particles.
Journal of Applied Polymer Science, 108, (6), 3859-3866, (2008)
   

Zhao CS et al., BPA transfer rate increase using molecular imprinted polyethersulfone hollow fiber membrane.
Journal of Membrane Science, 310, (1-2), 38-43, (2008)
   

Yang KG et al., Molecularly imprinted porous polysulfone particles for the binding and recognition of bisphenol A.
Desalination, 245, (1-3), 232-245, (2009)
   

Yang KG et al., One-Pot Synthesis of Hydrophilic Molecularly Imprinted Nanoparticles.
Macromolecules, 42, (22), 8739-8746, (2009)
   

Cao FM et al., Self-Assembly Molecularly Imprinted Nanofiber for 4-HA Recognition.
Analytical Letters, 43, (17), 2790-2797, (2010)
   

Liu JX et al., Macroporous molecularly imprinted monolithic polymer columns for protein recognition by liquid chromatography.
Journal of Separation Science, 33, (17-18), 2757-2761, (2010)
   

Liu JX et al., Preparation of a new type of affinity materials combining metal coordination with molecular imprinting.
Chemical Communications, 47, (13), 3969-3971, (2011)
   

Yang KG et al., Protein-imprinted materials: rational design, application and challenges.
Analytical and Bioanalytical Chemistry, 403, (8), 2173-2183, (2012)
   

Li QR et al., Transferrin recognition based on a protein imprinted material prepared by hierarchical imprinting technique.
Microchimica Acta, 180, (15-16), 1379-1386, (2013)
   

Li QR et al., Preparation of epitope imprinted particles for transferrin recognition by reversible addition fragmentation chain transfer strategy.
Chinese Journal of Chromatography, 32, (10), 1029-1033, (2014)
   

Li QR et al., Surface Protein Imprinted Core-Shell Particles for High Selective Lysozyme Recognition Prepared by Reversible Addition-Fragmentation Chain Transfer Strategy.
ACS Applied Materials & Interfaces, 6, (24), 21954-21960, (2014)
   

Liu JX et al., Preparation of protein imprinted materials by hierarchical imprinting techniques and application in selective depletion of albumin from human serum.
Scientific Reports, 4, Article 5487-(2014)
   

Yang KG et al., Epitope imprinted polyethersulfone beads by self-assembly for target protein capture from the plasma proteome.
Chemical Communications, 50, (67), 9521-9524, (2014)
   

Li SW et al., Surface-Imprinted Nanoparticles Prepared with a His-Tag-Anchored Epitope as the Template.
Analytical Chemistry, 87, (9), 4617-4620, (2015)
   

Li QR et al., Preparation of surface imprinted core-shell particles via a metal chelating strategy: specific recognition of porcine serum albumin.
Microchimica Acta, 183, (1), 345-352, (2016)
   

Li SW et al., Correction: Epitope imprinting enhanced IMAC (EI-IMAC) for highly selective purification of His-tagged protein.
Journal of Materials Chemistry B, 4, (15), 2739-2739, (2016)
   

Li SW et al., Thermoresponsive Epitope Surface-Imprinted Nanoparticles for Specific Capture and Release of Target Protein from Human Plasma.
ACS Applied Materials & Interfaces, 8, (9), 5747-5751, (2016)
   

Li SW et al., Epitope imprinting enhanced IMAC (EI-IMAC) for highly selective purification of His-tagged protein.
Journal of Materials Chemistry B, 4, (11), 1960-1967, (2016)
   

Liu LK et al., Protein-imprinted material for the treatment of antibiotic-resistant bacteria.
Science Bulletin, 61, (24), 1890-1891, (2016)
   

Yang KG et al., Multiepitope Templates Imprinted Particles for the Simultaneous Capture of Various Target Proteins.
Analytical Chemistry, 88, (11), 5621-5625, (2016)
   

Liu LK et al., Artificial Antibody with Site-Enhanced Multivalent Aptamers for Specific Capture of Circulating Tumor Cells.
Analytical Chemistry, 91, (4), 2591-2594, (2019)
   

Yang KG et al., Epitope Imprinting Technology: Progress, Applications, and Perspectives toward Artificial Antibodies.
Advanced Materials, 31, (50), Article1902048-(2019)
   

Yang KG et al., Recent advances and application of epitope imprinted materials.
Chinese Science Bulletin, 64, (13), 1368-1379, (2019)
   

Yang KK

Li Q et al., Studies on Preparation and Performance of GSH Molecularly Imprinted Polymers.
Chemical Journal of Chinese Universities, 28, (6), 1059-1063, (2007)
   

Yang KL

Bi X et al., Complexation of Copper Ions with Histidine-Containing Tripeptides Immobilized on Solid Surfaces.
Langmuir, 23, (22), 11067-11073, (2007)
   

Bi XY et al., Preparation of Ion-Imprinted Silica Gels Functionalized with Glycine, Diglycine, and Triglycine and Their Adsorption Properties for Copper Ions.
Langmuir, 23, (15), 8079-8086, (2007)
   

Bi XY et al., On-Line Monitoring Imidacloprid and Thiacloprid in Celery Juice Using Quartz Crystal Microbalance.
Analytical Chemistry, 81, (2), 527-532, (2009)
   

Yang L

Yang L et al., Artificial receptor layer for herbicide detection based on electrosynthesized molecular imprinting technique and capacitive transduction.
Analytical Letters, 37, (11), 2303-2319, (2004)
   

Yang L et al., Capacitive biosensor for glutathione detection based on electropolymerized molecularly imprinted polymer and kinetic investigation of the recognition process.
Electroanalysis, 17, (11), 969-977, (2005)
   

Lin HT et al., Progress in preparation and applications of metal ion imprinted chitosan resin.
Tropical Agricultural Engineering, (1), 15-19, (2006)
   

Lv YK et al., Preparation of molecularly imprinted microspheres for solid-phase extraction coupled with HPLC for determination of the florfenicol residue in milk.
International Journal of Science Innovations and Discoveries, 2, (6), 610-616, (2012)
   

Lv YK et al., Synthesis and application of molecularly imprinted poly(methacrylic acid)-silica hybrid composite material for selective solid-phase extraction and high-performance liquid chromatography determination of oxytetracycline residues in milk.
Journal of Chromatography A, 1227, (1), 48-53, (2012)
   

Lv YK et al., Preparation and evaluation of a novel molecularly imprinted hybrid composite monolithic column for on-line solid-phase extraction coupled with HPLC to detect trace fluoroquinolone residues in milk.
Analytical Methods, 5, (7), 1848-1855, (2013)
   

Xie JQ et al., Synthesis and application of a molecularly imprinted polymer as a filter to reduce polycyclic aromatic hydrocarbon levels in mainstream cigarette smoke.
Reactive and Functional Polymers, 73, (12), 1606-1611, (2013)
   

Pan Y et al., A SAW-Based Chemical Sensor for Detecting Sulfur-Containing Organophosphorus Compounds Using a Two-Step Self-Assembly and Molecular Imprinting Technology.
Sensors, 14, (5), 8810-8820, (2014)
   

Lu ZY et al., Selective photodegradation of 2-mercaptobenzothiazole by a novel imprinted CoFe2O4/MWCNTs photocatalyst.
RSC Advances, 5, (59), 47820-47829, (2015)
   

Pan Y et al., Selective Surface Acoustic Wave-Based Organophosphorus Sensor Employing a Host-Guest Self-Assembly Monolayer of [beta]-Cyclodextrin Derivative.
Sensors, 15, (8), 17916-17925, (2015)
   

Lu ZY et al., Specific oriented recognition of a new stable ICTX@Mfa with retrievability for selective photocatalytic degrading of ciprofloxacin.
Catalysis Science & Technology, 6, (5), 1367-1377, (2016)
   

Yang L et al., Thermosensitive/magnetic molecularly imprinted polymers prepared by Pickering emulsion polymerization for selective separation of bifenthrin.
Desalination and Water Treatment, 57, (40), 18927-18938, (2016)
   

Li SF et al., Study on the preparation and adsorption of the cesium ion imprinted polymer based on surface imprinting technique.
Journal of Functional Materials, 48, (7), 7062-7068, (2017)
   

Yang L et al., Selective adsorption and separation of Cs(I) from salt lake brine by a novel surface magnetic ion-imprinted polymer.
Journal of Dispersion Science and Technology, 38, (11), 1547-1555, (2017)
   

Yang L et al., Preparation of Cs(I) Magnetic Ion-Imprinted Polymer and its Adsorption Behavior.
Bulletin of the Chinese Ceramic Society, 36, (2), 1-8, (2017)
   

Zhu YY et al., Molecularly imprinted nanoparticles and their releasing properties, bio-distribution as drug carriers.
Asian Journal of Pharmaceutical Sciences, 12, (2), 172-178, (2017)
   

Zhao X et al., Fast and Sensitive Detection of Diisononyl Phthalate in Liquor Sample by Molecularly Imprinted Polymer Based Electrochemical Sensor.
Russian Journal of Electrochemistry, 54, (8), 636-643, (2018)
   

Feng ZM et al., Coupling mesoporous imprinted polymer based DGT passive samplers and HPLC: A new tool for in-situ selective measurement of low concentration tetrabromobisphenol A in freshwaters.
Science of The Total Environment, 685, 442-450, (2019)
   

Pan Y et al., Detection of organophosphorus compounds using a surface acoustic wave array sensor based on supramolecular self-assembling imprinted films.
Analytical Methods, 12, (17), 2206-2214, (2020)
   

Yang LB

Yang LB et al., Ultrasensitive SERS Detection of TNT by Imprinting Molecular Recognition Using a New Type of Stable Substrate.
Chemistry - A European Journal, 16, (42), 12683-12693, (2010)
   

Zhao XY et al., Decoration of graphene with 2-aminoethanethiol functionalized gold nanoparticles for molecular imprinted sensing of erythrosine.
Carbon, 127, 618-626, (2018)
   

Yang LF

Yang LF et al., Preparation and Characteristics of Nickel(II) Ion-imprinted Polymer.
Journal of Instrumental Analysis, 30, (2), 135-139, 145, (2011)
   

Zhang XR et al., Preparation of L-Asparagine molecularly imprinted polymer using ionic liuid as cosolvent.
Journal of Functional Materials, 45, (14), 14052-14056, (2014)
   

Gao B et al., The performance optimization and specific adsorption of L-phenylalanine imprinted polymers using 1-vinyl-3-carboxymethylimidazolium chloride as functional monomer.
Designed Monomers and Polymers, 18, (3), 185-198, (2015)
   

Wang CL et al., Preparation of Molecularly Imprinted Regenerated Cellulose Composite Membranes by Surface-Initiated Atom Transfer Radical Polymerization Method for Selective Recognition of Lysozyme.
Adsorption Science & Technology, 33, (4), 411-425, (2015)
   

Yang LF et al., Molecularly imprinted polymers for the selective recognition of l-phenylalanine based on 1-buty-3-methylimidazolium ionic liquid.
Journal of Applied Polymer Science, 132, (36), ArticleNo42485-(2015)
   

Yang LG

Kang YF et al., Proceeding, Preparation of Cu2+ Imprinted Polymer Microspheres and its Application for the Determination of Cu2+ in Water, 
Jiang LZ (Ed.), 7-11, (2013)
   

Cui CF et al., Carbon-dot-encapsulated molecularly imprinted mesoporous organosilica for fluorescent sensing of rhodamine 6G.
Research on Chemical Intermediates, 44, (8), 4633-4640, (2018)
   

Yang LH

Jia XL et al., Ultrasensitive Detection of Phosphate Using Ion-Imprinted Polymer Functionalized AlInN/GaN High Electron Mobility Transistors.
IEEE Electron Device Letters, 37, (7), 913-915, (2016)
   

Yang LJ

Quan T et al., Effective extraction methods based on hydrophobic deep eutectic solvent coupled with functional molecularly imprinted polymers: Application on quercetagetin extraction from natural medicine and blood.
Microchemical Journal, 174, Article107076-(2022)
   

Yang LL

Li L et al., Surface molecularly imprinted polymers-based electrochemical sensor for bovine hemoglobin recognition.
Analyst, 138, (22), 6962-6968, (2013)
   

Xu GL et al., Selective recognition and electrochemical detection of p-nitrophenol based on a macroporous imprinted polymer containing gold nanoparticles.
Microchimica Acta, 180, (15-16), 1461-1469, (2013)
   

Zhu AH et al., Sol-Gel Imprinted Polymers Based Electrochemical Sensor for Paracetamol Recognition and Detection.
Analytical Letters, 46, (7), 1132-1144, (2013)
   

Cui FH et al., An Electrochemical Ethylparaben Sensor Based on Molecular Imprinted Film.
Journal of Analytical Science, 30, (3), 365-368, (2014)
   

Li L et al., Preparation and Application of Imprinted Electrochemical Sensor Based on Dopamine Self-Polymerization.
Journal of The Electrochemical Society, 161, (14), B312-B316, (2014)
   

Luo YY et al., Selective photodegradation of 1-methylimidazole-2-thiol by the magnetic and dual conductive imprinted photocatalysts based on TiO2/Fe3O4/MWCNTs.
Chemical Engineering Journal, 240, 244-252, (2014)
   

Chen TT et al., Imprinted ZnO/Magnetic Fly-Ash Photocatalyst Selectively Photodegraded Danofloxacin Mesylate Solution.
Nanoscience and Nanotechnology Letters, 7, (5), 441-445, (2015)
   

Lu ZY et al., Selective photodegradation of 2-mercaptobenzothiazole by a novel imprinted CoFe2O4/MWCNTs photocatalyst.
RSC Advances, 5, (59), 47820-47829, (2015)
   

Zhu Z et al., Surface imprinting of a g-C3N4 photocatalyst for enhanced photocatalytic activity and selectivity towards photodegradation of 2-mercaptobenzothiazole.
RSC Advances, 5, (51), 40726-40736, (2015)
   

Sun Y et al., Preparation of hemoglobin imprinted polymers based on graphene and protein removal assisted by electric potential.
RSC Advances, 6, (66), 61897-61905, (2016)
   

Gao J et al., Bioinspired synthesis of multi-walled carbon nanotubes based enoxacin-imprinted nanocomposite membranes with excellent antifouling and selective separation properties.
Journal of the Taiwan Institute of Chemical Engineers, 91, 468-480, (2018)
   

He JY et al., Synergistic recognition of transferrin by using performance dual epitope imprinted polymers.
Analytica Chimica Acta, 1186, Article339117-(2021)
   

Tan L et al., Specific adsorption and determination of aspartame in soft drinks with a zein magnetic molecularly imprinted modified MGCE sensor.
RSC Advances, 11, (22), 13486-13496, (2021)
   

Tan L et al., Investigating two distinct dummy templates molecularly imprinted polymers as paclitaxel adsorbent in synthesis system and releaser in biological samples.
Microchemical Journal, 165, Article106042-(2021)
   

Yang LM

Liu X et al., A novel non-imprinted adsorbent with superior selectivity towards high-performance capture of Ag(I).
Chemical Engineering Journal, 348, 224-231, (2018)
   

Lai WQ et al., Optimization of adsorption configuration by DFT calculation for design of adsorbent: A case study of palladium ion-imprinted polymers.
Journal of Hazardous Materials, 379, Article120791-(2019)
   

Ni CQ et al., Selective removal and recovery of La(III) using a phosphonic-based ion imprinted polymer: Adsorption performance, regeneration, and mechanism.
Journal of Environmental Chemical Engineering, 9, (6), Article106701-(2021)
   

Yang LN

Yang LY et al., A Study of Preparation and Performance of a Dichlorvos Electrochemical Sensor Based on Molecularly Imprinted Technique.
Analytical Letters, 45, (9), 1036-1044, (2012)
   

Yang LQ

Yang LQ et al., Selective enrichment and determination of nicosulfuron in water and soil by a stir bar based on molecularly imprinted polymer coatings.
Analytica Chimica Acta, 670, (1-2), 72-77, (2010)
   

Chen CB et al., Trace bensulfuron-methyl analysis in tap water, soil, and soybean samples by a combination of molecularly imprinted stir bar sorption extraction and HPLC-UV.
Journal of Applied Polymer Science, 122, (2), 1198-1205, (2011)
   

Yang LR

Li WS et al., Magnetic molecularly imprinted polymers for improved extraction of tanshinones from herbs via integrated extraction and cleanup system.
Biochemical Engineering Journal, 79, 206-213, (2013)
   

Yang LT

Wu WH et al., Sensitively Voltammetric Determination of Vanillin with a Molecularly Imprinted Ionic Liquid Polymer-Carboxyl Single-Walled Carbon Nanotubes Composite Electrode.
International Journal of Electrochemical Science, 11, 6009-6022, (2016)
   

Yang LT et al., Facile preparation of molecularly imprinted polypyrrole-graphene-multiwalled carbon nanotubes composite film modified electrode for rutin sensing.
Talanta, 161, 413-418, (2016)
   

Yang LT et al., Electrochemical determination of eugenol using a three-dimensional molecularly imprinted poly (p-aminothiophenol-co-p-aminobenzoic acids) film modified electrode.
Electrochimica Acta, 210, 293-300, (2016)
   

Wu WH et al., A vanillin electrochemical sensor based on molecularly imprinted poly(1-vinyl-3-octylimidazole hexafluoride phosphorus)-multi-walled carbon nanotubes@polydopamine-carboxyl single-walled carbon nanotubes composite.
Sensors and Actuators B: Chemical, 239, 481-487, (2017)
   

Xu BJ et al., Electrochemical determination of luteolin using molecularly imprinted poly-carbazole on MoS2/graphene-carbon nanotubes nanocomposite modified electrode.
Electrochimica Acta, 258, 1413-1420, (2017)
   

Yang LT et al., A novel quercetin electrochemical sensor based on molecularly imprinted poly(para-aminobenzoic acid) on 3D Pd nanoparticles-porous graphene-carbon nanotubes composite.
Sensors and Actuators B: Chemical, 251, 601-608, (2017)
   

Yang LT et al., Ionic liquid functionalized 3D graphene-carbon nanotubes-AuPd nanoparticles-molecularly imprinted copolymer based paracetamol electrochemical sensor: Preparation, characterization and application.
Talanta, 224, Article121845-(2021)
   

Yang LW

Yang LW et al., Synthesis and Recognition-Function of Ursolic Acid-Imprinted Polymer on Silica Surface.
Chinese Journal of Applied Chemistry, 25, (2), 137-141, (2008)
   

Liu J et al., Molecular structure and spectral characteristics of hyperoside and analysis of its molecular imprinting adsorption properties based on density functional theory.
Journal of Molecular Graphics and Modelling, 88, 228-236, (2019)
   

Yang LX

Liu YT et al., Enhanced photocatalysis on TiO2 nanotube arrays modified with molecularly imprinted TiO2 thin film.
Journal of Hazardous Materials, 182, (1-3), 912-918, (2010)
   

Luo XB et al., Grafting of molecularly imprinted polymers from the surface of Fe3O4 nanoparticles containing double bond via suspension polymerization in aqueous environment: A selective sorbent for theophylline.
Journal of Applied Polymer Science, 121, (4), 1930-1937, (2011)
   

Luo XB et al., Removal of water-soluble acid dyes from water environment using a novel magnetic molecularly imprinted polymer.
Journal of Hazardous Materials, 187, (1-3), 274-282, (2011)
   

Yang LX et al., Preparation of a Pyrazosulfuron-Ethyl Imprinted Polymer with Hydrophilic External Layers by Reversible Addition-Fragmentation Chain Transfer Precipitation and Grafting Polymerization.
Analytical Letters, 44, (16), 2617-2632, (2011)
   

Deng F et al., Preparation of conductive polypyrrole/TiO2 nanocomposite via surface molecular imprinting technique and its photocatalytic activity under simulated solar light irradiation.
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 395, (0), 183-189, (2012)
   

Luo XB et al., Preparation of water-compatible molecularly imprinted polymers for caffeine with a novel ionic liquid as a functional monomer.
Journal of Applied Polymer Science, 127, (4), 2884-2890, (2013)
   

Yang MX et al., Preparation of a bifunctional pyrazosulfuron-ethyl imprinted polymer with hydrophilic external layers by reversible addition-fragmentation chain transfer polymerization and its application in the sulfonylurea residue analysis.
Talanta, 114, 143-151, (2013)
   

Luo XB et al., Lithium ion-imprinted polymers with hydrophilic PHEMA polymer brushes: The role of grafting density in anti-interference and anti-blockage in wastewater.
Journal of Colloid and Interface Science, 492, 146-156, (2017)
   

Sun XL et al., Determination of nine bisphenols in sewage and sludge using dummy molecularly imprinted solid-phase extraction coupled with liquid chromatography tandem mass spectrometry.
Journal of Chromatography A, 1552, 10-16, (2018)
   

Sun XL et al., Dummy molecularly imprinted solid phase extraction of climbazole from environmental water samples.
Talanta, 196, 47-53, (2019)
   

Sun XL et al., Preparation and evaluation of dummy-template molecularly imprinted polymer as a potential sorbent for solid phase extraction of imidazole fungicides from river water.
Journal of Chromatography A, 1586, 1-8, (2019)
   

Yang LY

Yang LY et al., A Study of Preparation and Performance of a Dichlorvos Electrochemical Sensor Based on Molecularly Imprinted Technique.
Analytical Letters, 45, (9), 1036-1044, (2012)
   

Wang YF et al., Synthesis and Characterization of Magnetic Molecularly Imprinted Polymer for the Enrichment of Ofloxacin Enantiomers in Fish Samples.
Molecules, 21, ArticleNo915-(2016)
   

Wang YF et al., Surface-Imprinted Magnetic Carboxylated Cellulose Nanocrystals for the Highly Selective Extraction of Six Fluoroquinolones from Egg Samples.
ACS Applied Materials & Interfaces, 9, (2), 1759-1769, (2017)
   

Xu XR et al., Film-like bacterial cellulose based molecularly imprinted materials for highly efficient recognition and adsorption of cresol isomers.
Chemical Engineering Journal, 382, Article123007-(2020)
   

Tao Y et al., Fiber based organic electrochemical transistor integrated with molecularly imprinted membrane for uric acid detection.
Talanta, 238, Article123055-(2022)
   

Yang LZ

Yang LZ et al., Direct Evaluation of Ligand-Receptor Interaction by a Novel Imaging Model Based on Fluorescent Silica Nanoparticle as Ligand Probe and Molecular Imprinting Polymer as Artificial Receptor.
Analytical Letters, 44, (4), 687-697, (2011)
   

You M et al., Label-free electrochemical multi-sites recognition of G-rich DNA using multi-walled carbon nanotubes-supported molecularly imprinted polymer with guanine sites of DNA.
Electrochimica Acta, 199, 133-141, (2016)
   

Yang M

Zhu XX et al., Cross-linked porous polymer resins with reverse micellar imprints: Factors affecting the porosity of the polymers.
Macromolecules, 32, (2), 277-281, (1999)
   

Yang M et al., Preparation of Monodispersed Molecularly Imprinted Polymeric Microspheres by One-step Swelling Polymerization.
Fine Chemicals, 25, (6), 550-553, 557, (2008)
   

Huai LF et al., Synthesis and Characterization of Molecularly Imprinted Polymer Microspheres for Recognition of Chlorpyrifos.
Chinese Journal of Applied Chemistry, 26, (10), 1144-1148, (2009)
   

Yang M et al., Differential pulse voltammetric determination of trace rotenone using molecularly imprinted polymer microspheres.
Microchimica Acta, 166, (1), 95-99, (2009)
   

Liu J et al., Proceeding, Removal of chlorpyrifos from contaminated water using molecularly imprinted polymeric microspheres, 
Art. No. 5514935, (2010)
   

Liu J et al., Proceeding, Molecularly imprinted solid-phase extraction for chlorpyrifos determination in water samples, 
Du ZY, Sun XB (Eds.), 947-951, (2010)
   

Ma J et al., Study on the preparation of Gatifloxacin imprinted polymers and its binding properties.
Chemistry Bulletin, 73, (5), 455-460, (2010)
   

Hou CJ et al., Preparation and properties of molecularly imprinted polymeric microspheres for recognition of omethoate.
Journal of Functional Materials, 42, (12), 2233-2236+2240, (2011)
   

Wu J et al., TiO2 nanoparticles-enhanced luminol chemiluminescence and its analytical applications in organophosphate pesticide imprinting.
Sensors and Actuators B: Chemical, 160, (1), 511-516, (2011)
   

Yang M et al., Determination of trace rotenone by UV-Vis spectrophotometry using molecularly imprinted polymer microspheres.
Journal of Analytical Chemistry, 66, (9), 820-823, (2011)
   

Yang M et al., Proceeding, Preparation and Characterization of Molecularly Imprinted Polymer Microspheres of p-Nitroaniline, 
Sun DY, Sung WP, Chen R (Eds.), 3411-3414, (2011)
   

Shin MJ et al., Sensing Capability of Molecularly Imprinted Self-Assembled Monolayer Using Terphenylpropanethiol.
Particulate Science and Technology, 30, (6), 543-552, (2012)
   

Yang M et al., Development of Molecular Imprinted Solid Phase Extraction on the Detection for Trace Amounts of Analytes.
Materials Review, 26, (7), 69-73 (final page number not verified), (2012)
   

Yang M et al., Magnetic nanoparticles and quantum dots co-loaded imprinted matrix for pentachlorophenol.
Journal of Hazardous Materials, 237-238, 63-70, (2012)
   

Li JJ et al., Molecularly imprinted polymers on the surface of silica microspheres via sol-gel method for the selective extraction of streptomycin in aqueous samples.
Journal of Separation Science, 36, (6), 1142-1148, (2013)
   

Li ZF et al., Proceeding, Study on the Preparation of Streptomycin Imprinted Polymers on the Surface of Silica Micro and Nano Spheres, 
Tang F (Ed.), 920-925, (2013)
   

Yang M et al., Determination of ATP using a double-receptor sandwich method based on molecularly imprinted membrane and fluorescence-labeled uranyl-salophen complex.
Analytical and Bioanalytical Chemistry, 405, (23), 7545-7551, (2013)
   

Yang M et al., Proceeding, Preparation and Characterization of Molecularly Imprinted Polymer Microspheres of 2, 4-Dichlorophenoxyacetic Acid, 
Yarlagadda P, Kim YH (Eds.), 1816-1819, (2013)
   

Lu B et al., Molecularly imprinted electrochemical sensor based on an electrode modified with an imprinted pyrrole film immobilized on a [beta]-cyclodextrin/gold nanoparticles/graphene layer.
RSC Advances, 5, (101), 82930-82935, (2015)
   

Xie L et al., Solid-phase extraction using molecularly imprinted polymer for determination of ochratoxin A in human urine.
World Mycotoxin Journal, 8, (1), 37-43, (2015)
   

Gu Y et al., Biomimetic sensor based on molecularly imprinted polymer with nitroreductase-like activity for metronidazole detection.
Biosensors and Bioelectronics, 77, 393-399, (2016)
   

Sun Y et al., Preparation of hemoglobin (Hb) imprinted polymer by Hb catalyzed eATRP and its application in biosensor.
Biosensors and Bioelectronics, 77, 894-900, (2016)
   

Xia JF et al., Molecularly imprinted electrochemical biosensor based on chitosan/ionic liquid-graphene composites modified electrode for determination of bovine serum albumin.
Sensors and Actuators B: Chemical, 225, 305-311, (2016)
   

Yao J et al., Experimental and theoretical studies of a novel electrochemical sensor based on molecularly imprinted polymer and B, N, F-CQDs/AgNPs for enhanced specific identification and dual signal amplification in highly selective and ultra-trace bisphenol S determination in plastic products.
Analytica Chimica Acta, 1066, 36-48, (2019)
   

Zang YJ et al., Fabrication of S-MoSe2/NSG/Au/MIPs imprinted composites for electrochemical detection of dopamine based on synergistic effect.
Microchemical Journal, 156, Article104845-(2020)
   

Yang MC

Huang SC et al., A microfluidic system with integrated molecular imprinting polymer films for surface plasmon resonance detection.
Journal of Micromechanics and Microengineering, 16, (7), 1251-1257, (2006)
   

Hsu CW et al., Enhancement of the imprinting effect in cholesterol-imprinted microporous silica.
Journal of Non-Crystalline Solids, 354, (34), 4037-4042, (2008)
   

Hsu CW et al., Electrochemical epinephrine sensor using artificial receptor synthesized by sol-gel process.
Sensors and Actuators B: Chemical, 134, (2), 680-686, (2008)
   

Xie JJ et al., Preparation of nicotine surface molecularly imprinted polymers for selective solid-phase extraction of nicotine from zero-level refill liquids of electronic cigarettes.
Analytical Methods, 10, (29), 3637-3644, (2018)
   

Yang MH

Wang GS et al., Preparation and Characteristics of Esculin-Imprinted Polymers.
Helvetica Chimica Acta, 90, (6), 1179-1189, (2007)
   

Wang GS et al., Molecular imprinted solid-phase extraction of huperzine A from Huperzia Serrata.
Journal of Applied Polymer Science, 113, (5), 3049-3058, (2009)
   

Cao JL et al., Molecularly imprinted polymer-based solid phase clean-up for analysis of ochratoxin A in ginger and LC-MS/MS confirmation.
Food Control, 33, (2), 337-343, (2013)
   

Cao JL et al., Research progress on rapid detection methods of mycotoxins.
Chinese Journal of Pharmaceutical Analysis, 33, (1), 159-164, (2013)
   

Cao JL et al., Molecularly imprinted polymer-based solid phase clean-up for analysis of ochratoxin A in beer, red wine, and grape juice.
Journal of Separation Science, 36, (7), 1291-1297, (2013)
   

Xie LW et al., Determination of ochratoxin A in human urine by HPLC-FLD after cleaned-up by molecularly imprinted polymer solid phase extraction column.
Acta Pharmaceutica Sinica, 49, (4), 517-523, (2014)
   

Xu ZY et al., Sensitive and selective molecularly imprinted electrochemical sensor based on multi-walled carbon nanotubes for doxycycline hyclate determination.
Chinese Chemical Letters, 31, (1), 185-188, (2020)
   

Yang MK

Li DJ et al., Efficient vitamin B12-imprinted boronate affinity magnetic nanoparticles for the specific capture of vitamin B12.
Analytical Biochemistry, 561-562, 18-26, (2018)
   

Li DJ et al., Efficient preparation of surface imprinted magnetic nanoparticles using poly (2-anilinoethanol) as imprinting coating for the selective recognition of glycoprotein.
Talanta, 184, 316-324, (2018)
   

Yang ML

Sun BW et al., Relationship between template structure and its imprinting efficiency.
Acta Chimica Sinica, 61, (6), 878-884, (2003)
   

Yang ML et al., Study on the molecularly imprinted polymers with ethyl benzoate and its derivatives as templates.
Journal of Guangxi Normal University (Natural Science Edition), 21, (z5), 179-180, (2003)
   

Yang ML et al., Molecular imprinting mechanism study with benzoic acid and ethyl benzoate analogues as templates.
Chemical Journal of Chinese Universities, 25, (6), 1034-1036, (2004)
   

Yang ML et al., Molecularly imprinted polymers with p-acetaminophenol and its positional isomers as templates.
Analytical Letters, 37, (10), 2043-2052, (2004)
   

Yang ML et al., Molecularly imprinted polymer with salicylaldehyde-Cu(OAc)2 as template.
Journal of Molecular Recognition, 18, (1), 103-108, (2005)
   

Lai JP et al., Molecularly imprinted microspheres and nanospheres for di(2-ethylhexyl)phthalate prepared by precipitation polymerization.
Analytical and Bioanalytical Chemistry, 389, (2), 405-412, (2007)
   

Li ZM et al., Preparation for nitrocellulose membrane-poly (vinyl alcohol)-ionic imprinting and its application to determine trace copper by room temperature phosphorimetry.
Analytica Chimica Acta, 589, (1), 44-50, (2007)
   

Shen RL et al., Study on the Recognition Property of Molecularly Imprinted Polymers with Methyltestosterone as Template.
Modern Scientific Instruments, (6), 76-(2008)
   

Yang ML et al., Study on the molecularly imprinted polymers with methyl-testosterone as the template.
Talanta, 81, (1-2), 156-161, (2010)
   

Yang ML et al., Molecularly Imprinted Polymers with Mandelic Acid as Template.
Analytical Letters, 43, (15), 2390-2398, (2010)
   

Cui HZ et al., Novel Pb(II) ion-imprinted materials based on bis-pyrazolyl functionalized mesoporous silica for the selective removal of Pb(II) in water samples.
Microporous And Mesoporous Materials, 241, 165-177, (2017)
   

Yi Y et al., Preparation and Adsorption Studies of Tridentate Monomer-functionalized Lead Ion Imprinted Mesoporous Silica.
Chemistry Letters, 48, (6), 566-569, (2019)
   

Liu LX et al., Magnetic solid phase extraction sorbents using methyl-parathion and quinalphos dual-template imprinted polymers coupled with GC-MS for class-selective extraction of twelve organophosphorus pesticides.
Microchimica Acta, 187, (9), Article503-(2020)
   

Tian HJ et al., Rapid and sensitive determination of trace fluoroquinolone antibiotics in milk by molecularly imprinted polymer-coated stainless steel sheet electrospray ionization mass spectrometry.
Talanta, 219, Article121282-(2020)
   

Wang Y et al., Molecularly Imprinted Electrochemiluminescence Sensor for Sensitive and Selective Detection of Hydroquinone.
Chemistry Letters, 49, (7), 855-858, (2020)
   

Yang MX

Yang LX et al., Preparation of a Pyrazosulfuron-Ethyl Imprinted Polymer with Hydrophilic External Layers by Reversible Addition-Fragmentation Chain Transfer Precipitation and Grafting Polymerization.
Analytical Letters, 44, (16), 2617-2632, (2011)
   

Wang HS et al., Development of separation materials using controlled/living radical polymerization.
TrAC Trends in Analytical Chemistry, 31, (1), 96-108, (2012)
   

Yang MX et al., Preparation of a bifunctional pyrazosulfuron-ethyl imprinted polymer with hydrophilic external layers by reversible addition-fragmentation chain transfer polymerization and its application in the sulfonylurea residue analysis.
Talanta, 114, 143-151, (2013)
   

Qian LW et al., Immobilization of BSA on ionic liquid functionalized magnetic Fe3O4 nanoparticles for use in surface imprinting strategy.
Talanta, 168, 174-182, (2017)
   

Qian LW et al., Zwitterionic polymer chain-assisted lysozyme imprinted core-shell carbon microspheres with enhanced recognition and selectivity.
Talanta, 217, Article121085-(2020)
   

Yang N

Zhao KY et al., Adsorption and recognition of protein molecular imprinted calcium alginate/polyacrylamide hydrogel film with good regeneration performance and high toughness.
Reactive and Functional Polymers, 87, 7-14, (2015)
   

Chen HQ et al., Chitosan-Based Surface Molecularly Imprinted Polymer Microspheres for Sustained Release of Sinomenine Hydrochloride in Aqueous Media.
Applied Biochemistry and Biotechnology, 185, (2), 370-384, (2018)
   

Chen HQ et al., Chitosan-Based Surface Molecularly Imprinted Polymer Microspheres for Sustained Release of Sinomenine Hydrochloride in Aqueous Media.
Applied Biochemistry and Biotechnology, 185, (2), 370-384, (2018)
   

Yang NJ

Liu MC et al., A pM leveled photoelectrochemical sensor for microcystin-LR based on surface molecularly imprinted TiO2@CNTs nanostructure.
Journal of Hazardous Materials, 331, 309-320, (2017)
   

Yang P

Yang P et al., Preparation of quercetin imprinted core-shell organosilicate microspheres using surface imprinting technique.
Chinese Chemical Letters, 23, (5), 615-618, (2012)
   

Guo M et al., Synthesis and characterization of the molecularly imprinted polymer of ethyl carbamate and the exploration of molecular recognition properties.
Journal of Chinese Institute of Food Science and Technology, 14, (3), 55-63, (2014)
   

Yang P et al., A novel morphological ion imprinted polymers for selective solid phase extraction of Cd(II): Preparation, adsorption properties and binding mechanism to Cd(II).
Reactive and Functional Polymers, 151, Article104569-(2020)
   

Yang PH

Yang L et al., Capacitive biosensor for glutathione detection based on electropolymerized molecularly imprinted polymer and kinetic investigation of the recognition process.
Electroanalysis, 17, (11), 969-977, (2005)
   

Yang PJ

Zhou CY et al., Water-compatible halloysite-imprinted polymer by Pickering emulsion polymerization for the selective recognition of herbicides.
Journal of Separation Science, 38, (8), 1365-1371, (2015)
   

Yang PY

Luo YY et al., Selective photodegradation of 1-methylimidazole-2-thiol by the magnetic and dual conductive imprinted photocatalysts based on TiO2/Fe3O4/MWCNTs.
Chemical Engineering Journal, 240, 244-252, (2014)
   

Yang Q

Yang Q et al., Removal of Cr3+ by the surface molecularly imprinted adsorbent by penicillium chysogenum mycelium in wastewater.
Environmental Pollution and Control, 28, (1), 14-16, 27, (2006)
   

Wang MJ et al., Preparation of electrochemical sensor for paracetamol based on molecular imprinted film.
Chemical Research and Application, 23, (7), 888-892, (2011)
   

Gao JF et al., The design of protein-imprinted polymers as antibody substitutes for investigating protein-protein interactions.
Biomaterials, 33, (11), 3344-3352, (2012)
   

Yang Q et al., Using molecularly imprinted polymer for protecting functional group in organic reaction.
Journal of Applied Polymer Science, 130, (1), 595-602, (2013)
   

Lan F et al., Polydopamine-based superparamagnetic molecularly imprinted polymer nanospheres for efficient protein recognition.
Colloids and Surfaces B: Biointerfaces, 123, 213-218, (2014)
   

Liu DJ et al., Core-shell molecularly imprinted polymer nanoparticles with assistant recognition polymer chains for effective recognition and enrichment of natural low-abundance protein.
Acta Biomaterialia, 10, (2), 769-775, (2014)
   

Fu XW et al., Template-Monomer Interaction in Molecular Imprinting: Is the Strongest the Best?
Open Journal of Organic Polymer Materials, 5, 58-68, (2015)
   

Hou J et al., Hydrophilic-Hydrophobic Patterned Molecularly Imprinted Photonic Crystal Sensors for High-Sensitive Colorimetric Detection of Tetracycline.
Small, 11, (23), 2738-2742, (2015)
   

Yang Q et al., Design and Preparation of Ferulic Acid Surface-Imprinted Material and Its Molecular Recognition Characteristic.
Polymer Materials Science and Engineering, 32, (2), 173-178+185, (2016)
   

Lan F et al., Superparamagnetic nanocomposites based on surface imprinting for biomacromolecular recognition.
Materials Science and Engineering: C, 70, (Part 2), 1076-1080, (2017)
   

Yang Q et al., Label-free colorimetric detection of tetracycline using analyte-responsive inverse-opal hydrogels based on molecular imprinting technology.
New Journal of Chemistry, 41, (18), 10174-10180, (2017)
   

Li JH et al., Thermosensitive molecularly imprinted core-shell CdTe quantum dots as a ratiometric fluorescence nanosensor for phycocyanin recognition and detection in seawater.
Analyst, 143, (15), 3570-3578, (2018)
   

Ostovan A et al., Hydrophilic Multitemplate Molecularly Imprinted Biopolymers Based on a Green Synthesis Strategy for Determination of B-Family Vitamins.
ACS Applied Materials & Interfaces, 10, (4), 4140-4150, (2018)
   

Yang Q et al., Strategies of molecular imprinting-based fluorescence sensors for chemical and biological analysis.
Biosensors and Bioelectronics, 112, 54-71, (2018)
   

Yang Q et al., Simultaneous phase-inversion and imprinting based sensor for highly sensitive and selective detection of bisphenol A.
Talanta, 176, 595-603, (2018)
   

Yang Q et al., Ternary Emission of a Blue-, Green-, and Red-Based Molecular Imprinting Fluorescence Sensor for the Multiplexed and Visual Detection of Bovine Hemoglobin.
Analytical Chemistry, 91, (10), 6561-6568, (2019)
   

Yang Q et al., Dual-emission color-controllable nanoparticle based molecular imprinting ratiometric fluorescence sensor for the visual detection of Brilliant Blue.
Sensors and Actuators B: Chemical, 284, 428-436, (2019)
   

Li CY et al., Facile approach to the synthesis of molecularly imprinted ratiometric fluorescence nanosensor for the visual detection of folic acid.
Food Chemistry, 319, Article126575-(2020)
   

Yang Q et al., Rational construction of a triple emission molecular imprinting sensor for accurate naked-eye detection of folic acid.
Nanoscale, 12, (11), 6529-6536, (2020)
   

Yang QL

Yang QL et al., Preparation and Performance of Fiber-Packed Needle-type Extraction Device.
Chinese Journal of Analytical Chemistry, 42, (4), 507-512, (2014)
   

Lou DW et al., Preparation and application of a coated-fiber needle extraction device.
Journal of Separation Science, 39, (19), 3769-3774, (2016)
   

Yang QQ

Yang QQ et al., Preparation of baicalein molecularly imprinted monolithic columns.
Chinese Journal of Pharmaceutical Analysis, 31, (1), 1-5, (2011)
   

Yang QR

Li X et al., Specific adsorption and highly sensitive detection of methyl red in wastewater using an iron paste electrode modified with a molecularly imprinted polymer.
Electrochemistry Communications, 132, Article107144-(2021)
   

Yang QW

Liu MC et al., A pM leveled photoelectrochemical sensor for microcystin-LR based on surface molecularly imprinted TiO2@CNTs nanostructure.
Journal of Hazardous Materials, 331, 309-320, (2017)
   

Yang QX

Hao Y et al., Preparation of Magnetic Chitosan Cu2+ Imprinted Particles and the Adsorption of Cu2+.
Polymer Materials Science and Engineering, 30, (5), 154-158, (2014)
   

Liu YH et al., Sensitive analysis of trace macrolide antibiotics in complex food samples by ambient mass spectrometry with molecularly imprinted polymer-coated wooden tips.
Talanta, 204, 238-247, (2019)
   

Yang QY

Yang QY et al., Determination of Parathion in Vegetables by Electrochemical Sensor Based on Molecularly Imprinted Polyethyleneimine/Silica Gel Films.
Journal of Agricultural and Food Chemistry, 57, (15), 6558-6563, (2009)
   

Liang Y et al., Composites of Polyaniline Nanofibers and Molecularly Imprinted Polymers for Recognition of Nitroaromatic Compounds.
Chemistry - A European Journal, 17, (21), 5989-5997, (2011)
   

Tang XS et al., Fe3O4@Au sphere molecular imprinting with self-assembled monolayer for the recognition of parathion-methyl.
Analytical Methods, 3, (10), 2313-2321, (2011)
   

Zhang D et al., A molecularly imprinted polymer based on functionalized multiwalled carbon nanotubes for the electrochemical detection of parathion-methyl.
Analyst, 137, (11), 2629-2636, (2012)
   

Yang QZ

Yuan B et al., Pillar[6]arene Containing Multilayer Films: Reversible Uptake and Release of Guest Molecules with Methyl Viologen Moieties.
ACS Applied Materials & Interfaces, 8, (6), 3679-3685, (2016)
   

Yang R

Zhu L et al., Determination of 16 polycyclic aromatic hydrocarbons with European priority in smoked meat by molecularly imprinted solid-phase extraction.
Journal of Food Safety and Quality, 4, (3), 911-916, (2013)
   

Tan L et al., A fluorescent turn-on detection scheme for [alpha]-fetoprotein using quantum dots placed in a boronate-modified molecularly imprinted polymer with high affinity for glycoproteins.
Microchimica Acta, 182, (15-16), 2615-2622, (2015)
   

Tan L et al., Ultra-high performance liquid chromatography combined with mass spectrometry for determination of aflatoxins using dummy molecularly imprinted polymers deposited on silica-coated magnetic nanoparticles.
Microchimica Acta, 183, (4), 1469-1477, (2016)
   

Yang R et al., An effective method for the synthesis of yolk-shell magnetic mesoporous carbon-surface molecularly imprinted microspheres.
Journal of Materials Chemistry A, 4, (25), 9807-9815, (2016)
   

Yang R et al., Simultaneous extraction and determination of phthalate esters in aqueous solution by yolk-shell magnetic mesoporous carbon-molecularly imprinted composites based on solid-phase extraction coupled with gas chromatography-mass spectrometry.
Talanta, 161, 114-121, (2016)
   

Liang YM et al., Molecularly imprinted electrochemical sensor for daidzein recognition and detection based on poly(sodium 4-styrenesulfonate) functionalized graphene.
Sensors and Actuators B: Chemical, 251, 542-550, (2017)
   

Liang YM et al., High sensitive and selective graphene oxide/molecularly imprinted polymer electrochemical sensor for 2, 4-dichlorophenol in water.
Sensors and Actuators B: Chemical, 240, 1330-1335, (2017)
   

Liu YY et al., A highly sensitive and selective electrochemical sensor based on polydopamine functionalized graphene and molecularly imprinted polymer for the 2, 4-dichlorophenol recognition and detection.
Talanta, 195, 691-698, (2019)
   

Wang L et al., AgNPs-PDA-GR nanocomposites-based molecularly imprinted electrochemical sensor for highly recognition of 2, 4, 6-trichlorophenol.
Microchemical Journal, 159, Article105567-(2020)
   

Yang RB

Liu YT et al., Enhanced photocatalysis on TiO2 nanotube arrays modified with molecularly imprinted TiO2 thin film.
Journal of Hazardous Materials, 182, (1-3), 912-918, (2010)
   

Yang RC

Yu PP et al., Green synthesis of ion-imprinted macroporous composite magnetic hydrogels for selective removal of nickel (II) from wastewater.
Journal of Molecular Liquids, 344, Article117963-(2021)
   

Yang RF

Grenier CJ et al., Rapid, High Affinity Binding by a Fluorescein Templated Copolymer Combining Covalent, Hydrophobic, and Acid-Base Noncovalent Crosslinks.
Sensors, 18, (5), ArticleNo1330-(2018)
   

Yang RG

Xu HQ et al., Synthesizing a surface-imprinted polymer based on the nanoreactor SBA-15 for optimizing the adsorption of salicylic acid from aqueous solution by response surface methodology.
New Journal of Chemistry, 45, (14), 6192-6205, (2021)
   

Yang RT

Yang RT et al., Book chapter, Silica gel, MCM, and activated alumina, 
In: Adsorbents: Fundamentals and Applications, Yang RT (Ed.) John Wiley & Sons, Inc.: New York, Ch. 6, 131-156, (2003)
   

Yang RX

Yang RX et al., Solid-phase extraction based on a molecularly imprinted polymer nanoshell at the surface of silica nanospheres for the specific enrichment and identification of alkaloids from Crinum asiaticum L. var. sinicum.
Journal of Separation Science, 40, (5), 1150-1157, (2017)
   

Yang S

Dan R et al., The synthesis of molecular imprinted chitosan-gels copolymerized with multiform functional monomers at three different temperatures and the recognition for the template ovalbumin.
Analyst, 138, (12), 3433-3443, (2013)
   

Jia XP et al., Polydopamine-based molecular imprinting on silica-modified magnetic nanoparticles for recognition and separation of bovine hemoglobin.
Analyst, 138, (2), 651-658, (2013)
   

Yang S et al., Synthesis of modified chitosan-based molecularly imprinted polymers for adsorptive protein separation.
Analytical Methods, 5, (20), 5471-5477, (2013)
   

Zhang CJ et al., Thermosensitive molecularly imprinted hydrogel cross-linked with N-malely chitosan for the recognition and separation of BSA.
Journal of Separation Science, 37, (4), 419-426, (2014)
   

Zhang M et al., The preparation of magnetic molecularly imprinted nanoparticles for the recognition of bovine hemoglobin.
Talanta, 120, 376-385, (2014)
   

Yang S et al., Proceeding, Preparation and characterization of molecularly imprinted mesoporous organosilica for biphenol Z recognition and separation, 
970-975, (2015)
   

Yang S et al., A Facile and Universal Method to Prepare Hydrophilic Molecularly Imprinted Microspheres by Encapsulating a Polymer in Hollow Mesoporous Silica Microspheres.
Chemistry - An Asian Journal, 10, (3), 722-727, (2015)
   

Zhang X et al., Surface Molecular Imprinting on Manganese-Doped Zinc Sulfide Quantum Dots for Fluorescence Detection of Bisphenol A in Water.
Analytical Letters, 48, (13), 2075-2089, (2015)
   

Zhang X et al., Mn-doped ZnS QDs entrapped in molecularly imprinted membranes for detection of trace bisphenol A.
Analytical Methods, 7, (19), 8212-8219, (2015)
   

Yang S et al., Preparation and evaluation of Fe3O4 nanoparticles incorporated molecularly imprinted polymers for protein separation.
Journal of Materials Science, 51, (2), 937-949, (2016)
   

Yang S et al., Molecularly Imprinted Polymers for the Identification and Separation of Chiral Drugs and Biomolecules.
Polymers, 8, (6), ArticleNo216-(2016)
   

You M et al., Label-free electrochemical multi-sites recognition of G-rich DNA using multi-walled carbon nanotubes-supported molecularly imprinted polymer with guanine sites of DNA.
Electrochimica Acta, 199, 133-141, (2016)
   

Zhang X et al., Surface-imprinted polymer coating l-cysteine-capped ZnS quantum dots for target protein specific recognition.
Journal of Materials Science, 51, (12), 6075-6085, (2016)
   

Yang S et al., Ion-Imprinted Mesoporous Silica for Selective Removal of Uranium from Highly Acidic and Radioactive Effluent.
ACS Applied Materials & Interfaces, 9, (34), 29337-29344, (2017)
   

You M et al., Ultrasensitive Electrochemical Detection of Glycoprotein Based on Boronate Affinity Sandwich Assay and Signal Amplification with Functionalized SiO2@Au Nanocomposites.
ACS Applied Materials & Interfaces, 9, (16), 13855-13864, (2017)
   

Zhang LX et al., Surface Ion-Imprinted Polypropylene Nonwoven Fabric for Potential Uranium Seawater Extraction with High Selectivity over Vanadium.
Industrial & Engineering Chemistry Research, 56, (7), 1860-1867, (2017)
   

Zhang X et al., Specific recognition and detection of target proteins by new fluorescence molecularly imprinted membrane.
Chinese Journal of Chromatography, 35, (3), 252-254, (2017)
   

You M et al., Molecularly imprinted polymers-based electrochemical DNA biosensor for the determination of BRCA-1 amplified by SiO2@Ag.
Biosensors and Bioelectronics, 112, 72-78, (2018)
   

Zhang X et al., Fluorescent molecularly imprinted membranes as biosensor for the detection of target protein.
Sensors and Actuators B: Chemical, 254, 1078-1086, (2018)
   

Zhang X et al., Magnetic Fluorescence Molecularly Imprinted Polymer Based on FeOx/ZnS Nanocomposites for Highly Selective Sensing of Bisphenol A.
Polymers, 11, (7), ArticleNo1210-(2019)
   

Kou YC et al., Recyclable Magnetic MIP-Based SERS Sensors for Selective, Sensitive, and Reliable Detection of Paclobutrazol Residues in Complex Environments.
ACS Sustainable Chemistry & Engineering, 8, (38), 14549-14556, (2020)
   

You M et al., A novel electrochemical biosensor with molecularly imprinted polymers and aptamer-based sandwich assay for determining amyloid-[beta] oligomer.
Journal of Electroanalytical Chemistry, 862, Article114017-(2020)
   

Gan Q et al., Two-Dimensional Ion-Imprinted Silica for Selective Uranium Extraction from Low-Level Radioactive Effluents.
ACS Sustainable Chemistry & Engineering, 9, (23), 7973-7981, (2021)
   

Zhou L et al., Dual Ion-Imprinted Mesoporous Silica for Selective Adsorption of U(VI) and Cs(I) through Multiple Interactions.
ACS Applied Materials & Interfaces, 13, (5), 6322-6330, (2021)
   

Yang SC

Han XY et al., Recent Progress of Imprinted Polymer Photonic Waveguide Devices and Applications.
Polymers, 10, (6), ArticleNo603-(2018)
   

Yang SF

Yang SF et al., Proceeding, The Latest Applications of Chitin and Chitosan in Wastewater Treatment, 
Shi YX, Wan AJ (Eds.), 151-157, (2013)
   

Jiang SH et al., A Novel Molecularly Imprinted Sensor for Direct Tartrazine Detection.
Analytical Letters, 47, (2), 323-330, (2014)
   

Guo QJ et al., In-situ and controllable synthesis of graphene-gold nanoparticles/molecularly imprinted polymers composite modified electrode for sensitive and selective rutin detection.
Microchemical Journal, 158, Article105254-(2020)
   

Yang SG

Zhuang Y et al., Determination of Tetracyclines in Water and Milk by Solid-phase Microextraction Based on Tetracylines Molecularly Imprinted Polymers Coupled with HPLC.
Journal of Analytical Science, 30, (4), 451-456, (2014)
   

Yang SH

Yang SH et al., Open Tubular Molecular Imprinted Polymer Fabricated in Silica Capillary for the Chiral Recognition of Neutral Enantiomers in Capillary Electrochromatography.
Bulletin of the Korean Chemical Society, 33, (5), 1664-1668, (2012)
   

Cao JL et al., Molecularly imprinted polymer-based solid phase clean-up for analysis of ochratoxin A in ginger and LC-MS/MS confirmation.
Food Control, 33, (2), 337-343, (2013)
   

Cheong WJ et al., Book chapter, Open Tubular Molecular Imprinted Phases in Chiral Capillary Electrochromatography, 
In: Chiral Separations, Methods and Protocols, Scriba GKE (Ed.) Humana Press: Ch. 30, 469-487, (2013)
   

Cheong WJ et al., Molecular imprinted polymers for separation science: A review of reviews.
Journal of Separation Science, 36, (3), 609-628, (2013)
   

Yang SH et al., Restricted access media as a streamlined approach toward on-line sample preparation: Recent advancements and applications.
Journal of Separation Science, 36, (17), 2922-2938, (2013)
   

Yang SJ

Kim JH et al., Morphochemical imprinting of melamine cyanurate mesocrystals in glucose-derived carbon for high performance lithium ion batteries.
Journal of Materials Chemistry A, 5, (39), 20635-20642, (2017)
   

Yang SL

Yang SL et al., Preparation of methyl parathion imprinted Polymer and Its Application for Solid-phase Extraction.
Journal of Qinghai Normal University (Natural Science Edition), (4), 47-50, (2009)
   

Ma C et al., Application of parathion MIPs in solid-phase extraction.
Chinese Journal of Analysis Laboratory, 30, (3), 43-45, (2011)
   

Ma C et al., Preparation of malathion imprinted polymer and its application for solid-phase extraction.
Chinese Journal of Analysis Laboratory, 30, (7), 58-61, (2011)
   

Zheng H et al., Highly selective determination of rhodium(III) using silica gel surface-imprinted solid-phase extraction.
International Journal of Environmental Analytical Chemistry, 91, (11), 1013-1023, (2011)
   

Hou SY et al., Multi-templates Molecularly Imprinted Polymer for the Specific Solid-Phase Extraction of Saponins from Panax notoginseng Herbal Extract.
Current Pharmaceutical Analysis, 11, (4), 292-299, (2015)
   

Yang SM

Wang PL et al., Molecularly imprinted polymer solid phase extraction coupled with gas chromatography-mass spectrometry for the determination of trace clenbuterol hydrochloric in animal urine.
Chinese Journal of Analytical Chemistry, 35, (9), 1319-1322, (2007)
   

Yang SM et al., Molecularly imprinted electrochemical sensor based on the synergic effect of nanoporous gold and copper nanoparticles for the determination of cysteine.
Journal of Solid State Electrochemistry, 20, (7), 2037-2044, (2016)
   

Yang SM et al., Electrochemical determination of thrombin with molecularly imprinted polymers and multiwalled carbon nanotubes.
Canadian Journal of Chemistry - Revue Canadienne de Chimie, 95, (7), 799-805, (2017)
   

Li LL et al., Preparation and Application of Bisphenol-A TiO2 Gel Molecularly Imprinted Electrochemical Sensor Based on the Sensitivity-Enhancement of Gold Nanoparticles.
Chinese Journal of Applied Chemistry, 35, (4), 484-490, (2018)
   

Yang SM et al., A Molecularly Imprinted Polythionine-Modified Electrode Based on a Graphene-Gold Nanoparticle Composite (MIP/AuNPs/rGO/GCE) for the Determination of Thrombin.
International Journal of Electrochemical Science, 13, 9333-9345, (2018)
   

Yang SM et al., Study of horseradish peroxidase and hydrogen peroxide bi-analyte sensor with boronate affinity-based molecularly imprinted film.
Canadian Journal of Chemistry - Revue Canadienne de Chimie, 97, (12), 833-839, (2019)
   

Yang SP

Hu Q et al., The Preparation and Application of Nitrofurantoin Molecular-Imprinted Electrochemical Sensor Based on Glassy Carbon Electrode.
Journal of Analytical Science, 32, (1), 63-66, (2016)
   

Peng MJ et al., Magnetic Porous Molecularly Imprinted Polymers Based on Surface Precipitation Polymerization and Mesoporous SiO2 Layer as Sacrificial Support for Efficient and Selective Extraction and Determination of Chlorogenic Acid in Duzhong Brick Tea.
Molecules, 23, (7), ArticleNo1554-(2018)
   

Yang SQ

Cheng ZQ et al., Synthesis and characterization of an ion-imprinted polymer for selective solid phase extraction of thorium(IV).
Microchimica Acta, 173, (3), 423-431, (2011)
   

Yang SR

Yang SR et al., A Novel Rutin Electrochemical Sensor Using Reduced Graphene Oxide/Magnetite/Silver Nanoparticle-Molecularly Imprinted Polymer Composite Modified Electrode.
International Journal of Electrochemical Science, 13, 2483-2497, (2018)
   

Yang ST

Dong W et al., Synthesis of molecularly imprinted polymers and their enzyme-mimicking catalysis.
Journal of Nanjing University of Science and Technology, 30, (3), 361-365, (2006)
   

Yang SW

Zhang L et al., Improvement of Ag(I) adsorption onto chitosan/triethanolamine composite sorbent by an ion-imprinted technology.
Applied Surface Science, 263, 696-703, (2012)
   

Zhang L et al., Adsorption of Ni(II) ion on Ni(II) ion-imprinted magnetic chitosan/poly(vinyl alcohol) composite.
Colloid & Polymer Science, 293, (9), 2497-2506, (2015)
   

Wang WJ et al., Fluorescent and visual detection of norfloxacin in aqueous solutions with a molecularly imprinted polymer coated paper sensor.
Talanta, 208, Article120435-(2020)
   

Yang SX

Cheng HL et al., A pH-controllable imprinted composite membrane for selective separation of podophyllotoxin and its analog.
Journal of Applied Polymer Science, 128, (1), 363-370, (2013)
   

Yang SY

Lu ZY et al., Preparation and performance of a novel magnetic conductive imprinted photocatalyst for selective photodegradation of antibiotic solution.
RSC Advances, 3, (40), 18373-18382, (2013)
   

Peng SH et al., Analysis of imidacloprid residues in mango, cowpea and water samples based on portable molecular imprinting sensors.
PLoS ONE, 16, (9), Article_e0257042-(2021)
   

Yang SZ

Jin GP et al., Extremely sensitive electrode for melamine using a kind of molecularly imprinted nano-porous film.
Microchimica Acta, 174, (3), 265-271, (2011)
   

Yang T

Tang YW et al., The characteristic and application of molecularly imprinted polymer: Efficient sample preconcentration of antibiotic cefathiamidine from human plasma and serum by solid phase extraction.
Analytical Letters, 38, (2), 219-226, (2005)
   

Li YH et al., Development of a group selective molecularly imprinted polymers based solid phase extraction of malachite green from fish water and fish feed samples.
Analytica Chimica Acta, 624, (2), 317-325, (2008)
   

Yang T et al., Development of a selective molecularly imprinted polymer-based solid-phase extraction for indomethacin from water samples.
Analytical and Bioanalytical Chemistry, 391, (8), 2905-2914, (2008)
   

Yang T et al., Synthesis and Adsorption Characteristics of Cypermethrin-imprinted Polymer.
Food Science, 30, (9), 85-88, (2009)
   

Yang T et al., Preparation of clenbuterol-imprinted material using surface-molecular imprinting method and its molecule recognition character.
Plant Protection, 24, (5), 792-796, (2012)
   

Yang T et al., Determination of Trace Clenbuterol Residue in Swine Urine by LC-MS/MS with Dispersive Solid Phase Extraction using Molecular Imprinted Polymer as Adsorbent.
Journal of Agriculture, 2, (11), 48-51, (2012)
   

Yang T et al., Preparation and Characterization of Ractopamine-Imprinted Material Using Surface-Molecular Imprinting Method and Its Adsorption Characteristics.
Scientia Agricultura Sinica, 46, (6), 1256-1262, (2013)
   

Zhu SS et al., Synthesis and characterization of a molecularly imprinted polymer for the determination of trace tributyltin in seawater and seafood by liquid chromatography-tandem mass spectroscopy.
Journal of Chromatography B, 921-922, 21-26, (2013)
   

Zhu SS et al., Extraction of tributyltin by magnetic molecularly imprinted polymers.
Microchimica Acta, 180, (7-8), 545-553, (2013)
   

Sun L et al., Preparation and evaluation of camphor monolithic molecularly imprinted column.
Chinese Journal of Analysis Laboratory, 33, (7), 791-795, (2014)
   

Yang T et al., A molecularly imprinted organic-inorganic hybrid monolithic column for the selective extraction and HPLC determination of isoprocarb residues in rice.
Journal of Separation Science, 37, (5), 587-594, (2014)
   

Yin C et al., Separation and determination of camphor in the essential oil of lavandula angustifolia by magnetic molecularly imprinted polymer extraction/gas chromatography.
Chinese Journal of Analysis Laboratory, 33, (11), 1281-1285, (2014)
   

Li SS et al., Preparation of a multi-hollow magnetic molecularly imprinted polymer for the selective enrichment of indolebutyric acid.
Journal of Separation Science, 38, (15), 2573-2579, (2015)
   

Yang T et al., Dual-template magnetic molecularly imprinted particles with multi-hollow structure for the detection of dicofol and chlorpyrifos-methyl.
Journal of Separation Science, 39, (12), 2388-2395, (2016)
   

Zhang W et al., Novel Potentiometric Sensor Based on Molecular Imprinted Polyacrylamide for the Determination of Shikimic Acid in Herbal Medicine.
Analytical Letters, 51, (18), 2920-2932, (2018)
   

He YY et al., A novel lead-ion-imprinted magnetic biosorbent: preparation, optimization and characterization.
Environmental Technology, 40, (4), 499-507, (2019)
   

Liu PX et al., Two different states conversion mechanism of the imprinting sites.
Journal of Colloid and Interface Science, 539, 235-244, (2019)
   

Yan XP et al., Rapid Detection of Dimethoate in Soybean Samples by Microfluidic Paper Chips Based on Oil-Soluble CdSe Quantum Dots.
Foods, 10, (11), ArticleNo2810-(2021)
   

Yang TH

Cai PS et al., Preparation of magnetic molecularly imprinted polymers for selective isolation and determination of kaempferol and protoapigenone in Macrothelypteris torresiana.
Journal of Huazhong University of Science and Technology (Medical Sciences), 34, (6), 845-855, (2014)
   

Yang TR

Zhang HX et al., Magnetic Pb(II) Ion-Imprinted Polymer Prepared by Surface Imprinting Technique and its Adsorption Properties.
Separation Science and Technology, 50, (6), 901-910, (2015)
   

Zhang HX et al., Magnetic Zn (II) ion-imprinted polymer prepared by the surface imprinting technique and its adsorption properties.
Environmental Technology, 36, (21), 2702-2711, (2015)
   

Yang TY

Yang XH et al., Progress of molecular imprinting technique on the determination of pesticides residues.
Journal of Food Safety and Quality, 8, (2), 462-467, (2017)
   

Yang W

Yang HH et al., Molecularly imprinted sol-gel nanotubes membrane for biochemical separations.
Journal of the American Chemical Society, 126, (13), 4054-4055, (2004)
   

Ai JB et al., A self-probing, gate-controlled, molecularly imprinted electrochemical sensor for ultrasensitive determination of p-nonylphenol.
Electrochemistry Communications, 89, 1-5, (2018)
   

Ji SL et al., A hollow porous molecularly imprinted polymer as a sorbent for the extraction of 7 macrolide antibiotics prior to their determination by HPLC-MS/MS.
Microchimica Acta, 185, (3), ArticleNo203-(2018)
   

Wang Q et al., A facile horseradish peroxidase electrochemical biosensor with surface molecular imprinting based on polyaniline nanotubes.
Journal of Electroanalytical Chemistry, 817, 184-194, (2018)
   

Guo PQ et al., Rapid detection of aflatoxin B1 by dummy template molecularly imprinted polymer capped CdTe quantum dots.
Analytical and Bioanalytical Chemistry, 411, (12), 2607-2617, (2019)
   

Wang Q et al., An Ultrahighly Sensitive Electrochemical Biosensor for Cytochrome c with Surface Molecular Imprinting Based on Hybrid Nanomaterials.
International Journal of Electrochemical Science, 15, 990-1004, (2020)
   

Li QC et al., Simple electrochemical detection of Listeria monocytogenes based on a surface-imprinted polymer-modified electrode.
Analytical Methods, 13, (41), 4864-4870, (2021)
   

Zhang HP et al., Magnetic imprinted nanoparticles with synergistic tailoring of covalent and non-covalent interactions for purification and detection of procyanidin B2.
Microchimica Acta, 188, (1), Article17-(2021)
   

Yang WF

Wu KK et al., A surface molecularly imprinted electrospun polyethersulfone (PES) fiber mat for selective removal of bilirubin.
Journal of Materials Chemistry B, 5, (29), 5763-5773, (2017)
   

Yang WH

Yang WH et al., Preparation and recognized characteristic of 4-methyl imidazole molecularly imprinted polymers.
China Brewing, (5), 73-(2009)
   

Yang WH et al., Preparation of Melamine Molecularly Imprinted Polymer Microspheres by Precipitation Polymerization.
Acta Polymerica Sinica, (10), 1163-1169, (2010)
   

Yang WH et al., Preparation and Application of Core-Shell Magnetic Molecularly Imprinted Polymer Microspheres.
Progress In Chemistry, 22, (9), 1819-1825, (2010)
   

Yang WJ

Yang WJ et al., Preparation of dibenzoyl-D-tartaric acid molecularly imprinted monolithic column and its chromatographic property.
Chinese Journal of Analysis Laboratory, 29, (10), 21-25, (2010)
   

Chen XQ et al., In situ synthesis of monolithic molecularly imprinted stationary phases for liquid chromatographic enantioseparation of dibenzoyl tartaric acid enantiomers.
Journal of Porous Materials, 19, (5), 587-595, (2012)
   

Yang WJ et al., Molecularly imprinted polymers coated on multi-walled carbon nanotubes through a simple indirect method for the determination of 2, 4-dichlorophenoxyacetic acid in environmental water.
Applied Surface Science, 284, 692-699, (2013)
   

Yang WL

Zhou J et al., Studies on character of adsorption and recognition of etharidine template polymer.
Chemical Journal of Chinese Universities, 19, (9), 1388-1392, (1998)
   

Yang WL et al., Properties evaluation and separation application of naringin-imprinted polymers prepared by a covalent imprinting method based on boronate ester.
Journal of Polymer Research, 21, (4), Article No 383-(2014)
   

Li DJ et al., Efficient vitamin B12-imprinted boronate affinity magnetic nanoparticles for the specific capture of vitamin B12.
Analytical Biochemistry, 561-562, 18-26, (2018)
   

Yang WM

Xu WZ et al., Selective Solid-phase Extraction of Pb(II) Ions Using an Ion-imprinted Functionalized Sodium Trititanate Whisker Adsorbent Prepared by a Surface-imprinting Technique.
Adsorption Science & Technology, 28, (6), 509-519, (2010)
   

Huang WH et al., Selective Adsorption of Dibenzothiophene using Magnetic Molecularly Imprinted Polymers.
Adsorption Science & Technology, 30, (4), 331-344, (2012)
   

Li H et al., Synthesis of magnetic molecularly imprinted polymer particles for selective adsorption and separation of dibenzothiophene.
Microchimica Acta, 179, (1-2), 123-130, (2012)
   

Yang WM et al., Preparation and evaluation of hollow molecular imprinted polymer for adsorption of dibenzothiophene.
Applied Surface Science, 258, (17), 6583-6589, (2012)
   

Yang WM et al., Synthesis and Characterization of a Surface Molecular Imprinted Polymer as a New Adsorbent for the Removal of Dibenzothiophene.
Journal of Chemical & Engineering Data, 57, (6), 1713-1720, (2012)
   

Niu DD et al., Preparation and characterization of magnetic molecularly imprinted polymers for selective recognition of 3-methylindole.
Journal of Applied Polymer Science, 130, (4), 2859-2866, (2013)
   

Yang WM et al., Rational design and preparation for novel denitrogenation adsorbents by computational simulation and improved atom transfer radical polymerization.
New Journal of Chemistry, 37, (9), 2758-2767, (2013)
   

Yang WM et al., Rational preparation of dibenzothiophene-imprinted polymers by surface imprinting technique combined with atom transfer radical polymerization.
Applied Surface Science, 282, 809-819, (2013)
   

Yang WM et al., Preparation of indole surface molecularly imprinted polymer by atom transfer radical emulsion polymerization and its adsorption performance.
Journal of Materials Research, 28, (19), 2666-2676, (2013)
   

Liu LK et al., Molecular Simulation Assisted Design and Preparation of Magnetic Molecularly Imprinted Polymers and Their Characteristics.
Chinese Journal of Analytical Chemistry, 42, (2), 249-257, (2014)
   

Ma PF et al., Preparation and application of sulfadiazine surface molecularly imprinted polymers with temperature-responsive properties.
Journal of Applied Polymer Science, 132, (15), Article No 41769-(2015)
   

Ma PF et al., Preparation of Surface Molecularly Imprinted Polymers for Selective Removal and Determination of Sulphamethoxazole from Aqueous Media.
Adsorption Science & Technology, 33, (1), 45-62, (2015)
   

Ma PF et al., Surface imprinted polymers for oil denitrification with the combination of computational simulation and multi-template molecular imprinting.
Polymers for Advanced Technologies, 26, (5), 476-486, (2015)
   

Qiu CX et al., Rational design and preparation of dibenzothiophene-targeting molecularly imprinted polymers with molecular dynamics approaches and surface-initiated activators regenerated by electron-transfer atom-transfer radical polymerization.
Journal of Applied Polymer Science, 132, (41), ArticleNo42629-(2015)
   

Qiu CX et al., Surface molecular imprinting on hybrid SiO2-coated CdTe nanocrystals for selective optosensing of bisphenol A and its optimal design.
Applied Surface Science, 345, 405-417, (2015)
   

Wang YC et al., A core-shell CdTe quantum dots molecularly imprinted polymer for recognizing and detecting p-nitrophenol based on computer simulation.
RSC Advances, 5, (90), 73424-73433, (2015)
   

Yang WM et al., Synthesis of a Denitrification Adsorbent with Large Surface Area and Specific Pore Structure for the Removal of Indole from Fuel Oil.
Adsorption Science & Technology, 33, (5), 441-456, (2015)
   

Yang WM et al., Development of surface imprinting polymer as a selective adsorbent for adsorbing and separating dibenzothiophene from fuel oil.
Research on Chemical Intermediates, 41, (4), 2619-2633, (2015)
   

Yang WM et al., Optimal design of an imprinted preassembled system by quantum chemical calculations and preparation of a surface-imprinted material for the selective removal of quinoline.
Journal of Applied Polymer Science, 132, (15), Article No 41730-(2015)
   

Fan T et al., Molecularly imprinted polymer microspheres derived from pickering emulsions polymerization in determination of di(2-ethylhexyl) phthalate in bottled water samples.
Journal of Applied Polymer Science, 133, (22), ArticleNo43484-(2016)
   

Huang WH et al., Thermosensitive molecularly imprinted polymers based on magnetic nanoparticles for the recognition of sulfamethazine.
RSC Advances, 6, (78), 74734-74741, (2016)
   

Huang WH et al., Preparation and characterization of novel thermosensitive magnetic molecularly imprinted polymers for selective recognition of norfloxacin.
Journal of Polymer Research, 23, (5), ArticleNo94-(2016)
   

Li T et al., Synthesis and evaluation of a molecularly imprinted polymer with high-efficiency recognition for dibutyl phthalate based on Mn-doped ZnS quantum dots.
RSC Advances, 6, (59), 54615-54622, (2016)
   

Xu WZ et al., Acetylene black paste electrode modified with molecularly imprinted polymers/graphene for the determination of bisphenol A.
Journal of Separation Science, 39, (24), 4851-4857, (2016)
   

Yang WM et al., Computer-aided design and synthesis of magnetic molecularly imprinted polymers with high selectivity for the removal of phenol from water.
Journal of Separation Science, 39, (3), 503-517, (2016)
   

Han Y et al., Computer-aided design of molecularly imprinted polymers for recognition of atrazine.
Computational and Theoretical Chemistry, 1121, 29-34, (2017)
   

Luo X et al., Electrochemical sensor based on lead ion-imprinted polymer particles for ultra-trace determination of lead ions in different real samples.
RSC Advances, 7, (26), 16033-16040, (2017)
   

Xu WZ et al., Computer-aided design and synthesis of CdTe@SiO2 core-shell molecularly imprinted polymers as a fluorescent sensor for the selective determination of sulfamethoxazole in milk and lake water.
Journal of Separation Science, 40, (5), 1091-1098, (2017)
   

Xu WZ et al., Synthesis of surface molecular imprinted polymers based on carboxyl-modified silica nanoparticles with the selective detection of dibutyl phthalate from tap water samples.
Applied Surface Science, 426, 1075-1083, (2017)
   

Xu WZ et al., A magnetic fluorescence molecularly imprinted polymer sensor with selectivity for dibutyl phthalate via Mn doped ZnS quantum dots.
RSC Advances, 7, (81), 51632-51639, (2017)
   

Xu WZ et al., Preparation of Magnetic Imprinted Polymer by Surface Grafting and Its Recognition Performance for Dibutyl Phthalate.
Chinese Journal of Analytical Chemistry, 45, (4), 521-528, (2017)
   

Xu WZ et al., Construction of a novel electrochemical sensor based on molecularly imprinted polymers for the selective determination of chlorpyrifos in real samples.
Journal of Separation Science, 40, (24), 4839-4846, (2017)
   

Yang WM et al., Core-Shell Magnetic Molecularly Imprinted Polymer Prepared for Selectively Removed Indole from Fuel Oil.
Advances in Polymer Technology, 36, (2), 168-176, (2017)
   

Zhang XM et al., Synthesis and Evaluation of Ionic Liquid-Mediated Molecularly Imprinted Polymer for Highly Selective Recognition of Dibutyl Phthalate from Liquor Samples.
Advances in Polymer Technology, 36, (2), 220-229, (2017)
   

Zhou ZP et al., Synthesis of surface molecular imprinting polymer on SiO2-coated CdTe quantum dots as sensor for selective detection of sulfadimidine.
Applied Surface Science, 404, 188-196, (2017)
   

Zhou ZP et al., Synthesis and characterization of fluorescence molecularly imprinted polymers as sensor for highly sensitive detection of dibutyl phthalate from tap water samples.
Sensors and Actuators B: Chemical, 240, 1114-1122, (2017)
   

Chen XQ et al., Ratiometric fluorescence nanosensors based on core-shell structured carbon/CdTe quantum dots and surface molecularly imprinted polymers for the detection of sulfadiazine.
Journal of Separation Science, 41, (23), 4394-4401, (2018)
   

Huang WH et al., Novel Thermosensitive Core-Shell Surface Molecularly Imprinted Polymers Based on SiO2 for the Selective Adsorption of Sulfamethazine.
Materials, 11, (11), ArticleNo2067-(2018)
   

Wang YY et al., Surface molecularly imprinted polymers based ZnO quantum dots as fluorescence sensors for detection of diethylhexyl phthalate with high sensitivity and selectivity.
Polymer International, 67, (8), 1003-1010, (2018)
   

Gao ZK et al., Fluorometric determination of sulfadiazine by using molecularly imprinted poly(methyl methacrylate) nanobeads doped with manganese(II)-doped ZnS quantum dots.
Microchimica Acta, 186, (9), Article625-(2019)
   

Yang WM et al., A stimuli response, core-shell structured and surface molecularly imprinted polymers with specific pH for rapid and selective detection of sulfamethoxazole from milk sample.
Reactive and Functional Polymers, 151, Article104578-(2020)
   

Zhang YY et al., Computer-aided design and synthesis of molecular imprinting polymers based on doubly oriented functional multiwalled carbon nanotubes for electrochemically sensing bisphenol A.
Reactive and Functional Polymers, 157, Article104767-(2020)
   

Yang WM et al., Synthesis and characterization of an innovative molecular imprinted polymers based on CdTe QDs fluorescence sensing for selective detection of sulfadimidine.
Journal of Polymer Research, 28, (9), Article356-(2021)
   

Yang WQ

Yang WQ et al., Determination of Maleic Hydrazide Using the Chemiluminescence Sensor Method Based on Molecular Imprinting Technology.
Journal of Jiangxi Normal University (Natural Sciences Edition), 34, (1), 72-77, (2010)
   

Yang WR

Liu JQ et al., Molecularly engineered graphene surfaces for sensing applications: A review.
Analytica Chimica Acta, 859, 1-19, (2015)
   

Yang WT

Du ZX et al., Molecularly imprinted polymers on chloromethyl polystyrene resin prepared via RAFT polymerization.
Chinese Chemical Letters, 17, (4), 549-552, (2006)
   

Deng JP et al., Developments and new applications of UV-induced surface graft polymerizations.
Progress in Polymer Science, 34, (2), 156-193, (2009)
   

Hu YY et al., Surface-imprinted polymer microsphere based on self-stabilized precipitation polymerization for selective removal of norfloxacin.
Applied Surface Science, 574, Article151706-(2022)
   

Yang WW

Yang WW et al., Preparation of stoichiometric molecularly imprinted polymer coatings on magnetic particles for the selective extraction of auramine O from water.
Journal of Separation Science, 41, (22), 4185-4193, (2018)
   

Pataer P et al., Preparation of a stoichiometric molecularly imprinted polymer for auramine O and application in solid-phase extraction.
Journal of Separation Science, 42, (8), 1634-1643, (2019)
   

Wubulikasimu M et al., Synthesis of fluorescent drug molecules for competitive binding assay based on molecularly imprinted polymers.
RSC Advances, 9, (12), 6779-6784, (2019)
   

Yigaimu A et al., Magnetic Molecularly Imprinted Polymer Particles Based Micro-Solid Phase Extraction for the Determination of 4-Nitrophenol in Lake Water.
Macromolecular Research, 27, (11), 1089-1094, (2019)
   

Yang WX

Yang WX et al., Fabrication of inverse-opal lysozyme-imprinted polydopamine/polypyrrole microspheres with near-infrared-light-controlled release property.
Journal of Colloid and Interface Science, 548, 37-47, (2019)
   

Yang X

Zhang HB et al., Preparation and adsorption properties of p-nitrophenol imprinted materials based on multi-walled carbon nanotubes surface.
Chemical Journal of Chinese Universities, 31, (11), 2141-2147, (2010)
   

Zhang ZH et al., Synthesis and application of core-shell complex-imprinted polymer for the solid-phase extraction of melamine from dairy products.
Journal of Separation Science, 33, (17-18), 2854-2861, (2010)
   

Zhang ZH et al., Novel surface molecularly imprinted material modified multi-walled carbon nanotubes as solid-phase extraction sorbent for selective extraction gallium ion from fly ash.
Talanta, 82, (1), 304-311, (2010)
   

Liu X et al., Solid Phase Extraction of Ursolic Acid Using Imprinted Polymer Modified Multi-walled Carbon Nanotubes.
Chinese Journal of Analytical Chemistry, 39, (6), 839-845, (2011)
   

Luo LJ et al., Study on Nano-materials Modified Highly Sensitive L-phenylalaine Imprinted Sol-Gel Sensor.
Journal of Instrumental Analysis, 30, (5), 473-480, (2011)
   

Shi ZL et al., Molecularly imprinted on-line solid-phase extraction combined with chemiluminescence for the determination of resveratrol.
Chinese Journal of Analysis Laboratory, 30, (3), 5-8, (2011)
   

Yang X et al., Application of molecular imprinting technology in separation and purification of active ingredients from natural products.
Journal of Northeast Agricultural University, 42, (8), 146-153, (2011)
   

Zhang HB et al., Synthesis of a Novel Composite Imprinted Material Based on Multiwalled Carbon Nanotubes as a Selective Melamine Absorbent.
Journal of Agricultural and Food Chemistry, 59, (4), 1063-1071, (2011)
   

Zhang ML et al., Preparation of core-shell magnetic ion-imprinted polymer for selective extraction of Pb(II) from environmental samples.
Chemical Engineering Journal, 178, (1), 443-450, (2011)
   

Zhang ML et al., Preparation and Adsorption Properties of Magnetic Fe3O4@SiO2@CS Cadmium Ion-imprinted Polymer.
Chemical Journal of Chinese Universities, 32, (12), 2763-2768, (2011)
   

Zhang ZH et al., Novel molecularly imprinted polymers based on multi-walled carbon nanotubes with binary functional monomer for the solid-phase extraction of erythromycin from chicken muscle.
Journal of Chromatography B, 879, (19), 1617-1624, (2011)
   

Zhang ZH et al., Preparation of ursolic acid imprinted polymers based on multi-walled carbon nanotube surface and its application in solid phase extraction.
Acta Polymerica Sinica, (12), 1470-1476, (2011)
   

Zhang ZH et al., Novel magnetic bovine serum albumin imprinted polymers with a matrix of carbon nanotubes, and their application to protein separation.
Analytical and Bioanalytical Chemistry, 401, (9), 2855-2863, (2011)
   

Zhang ZH et al., A Polypyrrole-Imprinted Electrochemical Sensor Based on Nano-SnO2/Multiwalled Carbon Nanotubes Film Modified Carbon Electrode for the Determination of Oleanolic Acid.
Electroanalysis, 23, (10), 2446-2455, (2011)
   

Chen X et al., Molecularly imprinted polymers based on multi-walled carbon nanotubes for selective solid-phase extraction of oleanolic acid from the roots of kiwi fruit samples.
Talanta, 99, 959-965, (2012)
   

Chen X et al., Novel molecularly imprinted polymers based on multiwalled carbon nanotubes with bifunctional monomers for solid-phase extraction of rhein from the root of kiwi fruit.
Journal of Separation Science, 35, (18), 2414-2421, (2012)
   

Hu YF et al., Electrochemical Sensor for Sensitive Determination of Ga(III) Ion Based on [beta]-Cyclodextrin Incorporated Multi-walled Carbon Nanotubes and Imprinted Sol-gel Composite Film.
Chinese Journal of Chemistry, 30, (2), 377-385, (2012)
   

Liu X et al., Preparation and Adsorption Performance of Emodin Imprinted Material Based on Multi-wall Carbon Nanotubes.
Chemistry Bulletin, 75, (1), 51-57, (2012)
   

Shi ZL et al., A high sensitive and fully reversible chemiluminescence sensor based on molecularly imprinted polymers for determination of sulfadiazine in cattle and chicken tissues.
Chinese Journal of Analysis Laboratory, 31, (4), 110-114, (2012)
   

Yang X et al., Preparation of Bis(2-ethylhexyl) phthalate Imprinted Polymers Based on Multi-walled Carbon Nanotubes Surface and Its Application in Solid Phase Extraction.
Chinese Journal of Analytical Chemistry, 40, (6), 870-876, (2012)
   

Zhang ZH et al., Preparation of l-phenylalanine imprinted polymer based on monodisperse hybrid silica microsphere and its application on chiral separation of phenylalanine racemates as HPLC stationary phase.
Separation and Purification Technology, 87, (1), 142-148, (2012)
   

Huang WW et al., Fast and selective recognizes polysaccharide by surface molecularly imprinted film coated onto aldehyde-modified magnetic nanoparticles.
Analyst, 138, (21), 6653-6661, (2013)
   

Zhu LL et al., Preparation of Surface-Imprinted Polymer Magnetic Nanoparticles with Miniemulsion Polymerization for Recognition of Salicylic Acid.
Analytical Letters, 46, (6), 982-998, (2013)
   

He GW et al., A Sensitive and Selective Amperometric Immunosensor for Chloramphenicol Detection Based on Magnetic Nanocomposites Modify Screen-Printed Carbon Electrode as a Disposable Platform.
International Journal of Electrochemical Science, 9, 6962-6974, (2014)
   

Yang X et al., Novel molecularly imprinted polymers with carbon nanotube as matrix for selective solid-phase extraction of emodin from kiwi fruit root.
Food Chemistry, 145, 687-693, (2014)
   

Yang X et al., Synthesis of a novel molecularly imprinted organic-inorganic hybrid polymer for the selective isolation and determination of fluoroquinolones in tilapia.
Journal of Chromatography B, 945-946, 127-134, (2014)
   

Liu GY et al., Preparation of a magnetic molecularly imprinted polymer using g-C3N4-Fe3O4 for atrazine adsorption.
Materials Letters, 160, 472-475, (2015)
   

Zhao S et al., Water-compatible surface imprinting of 'Saccharin sodium' on silica surface for selective recognition and detection in aqueous solution.
Talanta, 144, 717-725, (2015)
   

Liu GY et al., Competitive fluorescence assay for specific recognition of atrazine by magnetic molecularly imprinted polymer based on Fe3O4-chitosan.
Carbohydrate Polymers, 137, 75-81, (2016)
   

Tang Q et al., Photoresponsive surface molecularly imprinted polymer on ZnO nanorods for uric acid detection in physiological fluids.
Materials Science and Engineering: C, 66, 33-39, (2016)
   

Yang X et al., A molecularly imprinted polymer as an antibody mimic with affinity for lysine acetylated peptides.
Journal of Materials Chemistry B, 4, (5), 920-928, (2016)
   

Zhang M et al., Preparation and characterization of surface molecularly imprinted film coated on a magnetic nanocore for the fast and selective recognition of the new neonicotinoid insecticide paichongding (IPP).
RSC Advances, 6, (5), 3714-3722, (2016)
   

Zhi KK et al., Preparation and Adsorption Properties Study of Glucose Magnetic Molecularly Imprinted Polymers with Dual Functional Monomers.
Acta Chimica Sinica, 74, (2), 199-207, (2016)
   

Gong CB et al., Photocontrolled extraction of uric acid from biological samples based on photoresponsive surface molecularly imprinted polymer microspheres.
Journal of Separation Science, 40, (6), 1396-1402, (2017)
   

Xie TJ et al., A facile molecularly imprinted electrochemical sensor based on graphene: application to the selective determination of thiamethoxam in grain.
RSC Advances, 7, (62), 38884-38894, (2017)
   

Zhang M et al., Molecularly imprinted polymer on graphene surface for selective and sensitive electrochemical sensing imidacloprid.
Sensors and Actuators B: Chemical, 252, 991-1002, (2017)
   

Zhi KK et al., Preparation and adsorption properties of glucose molecularly imprinted polymers in hydrous solution for effective determination of glucose in fruits by MISPE-HPLC.
Journal of the Iranian Chemical Society, 14, (10), 2087-2096, (2017)
   

Liang YL et al., Molecular imprinting technology and its application in terpenoids.
China Journal of Chinese Materia Medica, 43, (2), 267-273, (2018)
   

Yang SR et al., A Novel Rutin Electrochemical Sensor Using Reduced Graphene Oxide/Magnetite/Silver Nanoparticle-Molecularly Imprinted Polymer Composite Modified Electrode.
International Journal of Electrochemical Science, 13, 2483-2497, (2018)
   

Yao ZF et al., Electrochemical quercetin sensor based on a nanocomposite consisting of magnetized reduced graphene oxide, silver nanoparticles and a molecularly imprinted polymer on a screen-printed electrode.
Microchimica Acta, 185, (1), ArticleNo70-(2018)
   

Zhang SQ et al., Adsorption Behavior of Selective Recognition Functionalized Biochar to Cd(II) in Wastewater.
Materials, 11, (2), ArticleNo299-(2018)
   

Zhao QY et al., Selective recognition and fast enrichment of anthocyanins by dummy molecularly imprinted magnetic nanoparticles.
Journal of Chromatography A, 1572, 9-19, (2018)
   

Liang YL et al., Amido surface-functionalized magnetic molecularly imprinted polymers for the efficient extraction of Sibiskoside from Sibiraea angustata.
Journal of Chromatography B, 1109, 90-98, (2019)
   

Yang X et al., Controlled synthesis of PEGylated surface protein-imprinted nanoparticles.
Analyst, 144, (18), 5439-5448, (2019)
   

Yang X et al., Molecularly imprinted polymers based on zeolite imidazolate framework-8 for selective removal of 2, 4-dichlorophenoxyacetic acid.
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 570, 244-250, (2019)
   

Zhao QY et al., Dual functional monomer surface molecularly imprinted microspheres for polysaccharide recognition in aqueous solution.
Analytical Methods, 11, (21), 2800-2808, (2019)
   

Guo QJ et al., In-situ and controllable synthesis of graphene-gold nanoparticles/molecularly imprinted polymers composite modified electrode for sensitive and selective rutin detection.
Microchemical Journal, 158, Article105254-(2020)
   

Zhao QY et al., Strategy of Fusion Covalent Organic Frameworks and Molecularly Imprinted Polymers: A Surprising Effect in Recognition and Loading of Cyanidin-3-O-glucoside.
ACS Applied Materials & Interfaces, 12, (7), 8751-8760, (2020)
   

Chen ZL et al., Separation and enrichment of sibiskoside from Sibiraea angustat with magnetic surface dummy template molecularly imprinted polymers.
Journal of Chromatography B, 1178, Article122767-(2021)
   

Yang X et al., Synergistic effects of layer-by-layer films for highly selective and sensitive electrochemical detection of trans-resveratrol.
Food Chemistry, 338, Article127851-(2021)
   

Zhao QY et al., Synthesis of magnetic covalent organic framework molecularly imprinted polymers at room temperature: A novel imprinted strategy for thermo-sensitive substance.
Talanta, 225, Article121958-(2021)
   

Yang XA

Zhang ZH et al., Microwave-assisted Heating Preparation of Core-shell Ion-imprinted Polymer and Extraction of Cr(III) from Urine.
Chemical Journal of Chinese Universities, 31, (9), 1734-1740, (2010)
   

Yang XA et al., Preparation and Evaluation Properties of Pb2+ on-Imprinted Polymers on Chitosan Modified Multi-walled Carbon Nanotube.
Chinese Journal of Analytical Chemistry, 39, (1), 34-38, (2011)
   

Yang XB

Jia MF et al., A molecular imprinting fluorescence sensor based on quantum dots and a mesoporous structure for selective and sensitive detection of 2, 4-dichlorophenoxyacetic acid.
Sensors and Actuators B: Chemical, 252, 934-943, (2017)
   

Jia MF et al., Molecular imprinting technology for microorganism analysis.
TrAC Trends in Analytical Chemistry, 106, 190-201, (2018)
   

Zhang Z et al., Deposition of CdTe quantum dots on microfluidic paper chips for rapid fluorescence detection of pesticide 2, 4-D.
Analyst, 144, (4), 1282-1291, (2019)
   

Hao GY et al., A versatile microfluidic paper chip platform based on MIPs for rapid ratiometric sensing of dual fluorescence signals.
Microchemical Journal, 157, Article105050-(2020)
   

Yan XP et al., Rapid Detection of Dimethoate in Soybean Samples by Microfluidic Paper Chips Based on Oil-Soluble CdSe Quantum Dots.
Foods, 10, (11), ArticleNo2810-(2021)
   

Yang XC

Yang XC et al., Book chapter, Boronic Acid-Based Receptors and Chemosensors, 
In: Artificial Receptors for Chemical Sensors, Mirsky VM, Yatsimirsky AK (Eds.) Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, Ch. 6, 169-189, (2010)
   

Liao S et al., Adsorption characteristics, recognition properties, and preliminary application of nordihydroguaiaretic acid molecularly imprinted polymers prepared by sol-gel surface imprinting technology.
Applied Surface Science, 364, 579-588, (2016)
   

Yang XC et al., Preparation of magnetic imprinted graphene oxide composite for catalytic degradation of Congo red under dark ambient condition.
Water Science & Technology, 76, (7), 1676-1686, (2017)
   

Yang XD

Zhang XL et al., Determination of Ropivacaine Hydrochloride with Graphene Quantum Dots-Molecularly Imprinted Polymer Electrochemical Sensor.
Journal of Instrumental Analysis, 34, (2), 159-163, (2015)
   

Pan Y et al., Developing a generally applicable electrochemical sensor for detecting macrolides in water with thiophene-based molecularly imprinted polymers.
Water Research, 205, Article117670-(2021)
   

Yang XF

Chen ZP et al., Preparation of molecular surface imprinting material and its identification properties for bilirubin.
The Chinese Journal of Process Engineering, 9, (2), 387-392, (2009)
   

Li WS et al., Magnetic molecularly imprinted polymers for improved extraction of tanshinones from herbs via integrated extraction and cleanup system.
Biochemical Engineering Journal, 79, 206-213, (2013)
   

Li PJ et al., Imprinted nanobead-based disposable screen-printed potentiometric sensor for highly sensitive detection of 2-naphthoic acid.
Materials Letters, 225, 138-141, (2018)
   

Yang XG

Dong HX et al., A chiral stationary phase coated by surface molecularly imprinted polymer for separating 1, 1'-binaphthalene-2, 2'-diamine enantiomer by high performance liquid chromatography.
Journal of Chromatography A, 1376, 172-176, (2015)
   

Yang XH

Chen W et al., Preparation and Application of Electrode Modifided with Phoxim Molecular Imprinted Polymer.
Journal of Instrumental Analysis, 33, (3), 270-276, (2014)
   

Yang XH et al., Progress of molecular imprinting technique on the determination of pesticides residues.
Journal of Food Safety and Quality, 8, (2), 462-467, (2017)
   

Yang XJ

Liu HM et al., Uniformly sized [beta]-cyclodextrin molecularly imprinted microspheres prepared by a novel surface imprinting technique for ursolic acid.
Analytica Chimica Acta, 628, (1), 87-94, (2008)
   

Liu HM et al., Solid-phase extraction of ursolic acid from herb using b-cyclodextrin-based molecularly imprinted microspheres.
Journal of Separation Science, 31, (20), 3573-3580, (2008)
   

Xiong YQ et al., Molecularly imprinted membrane for the recognition of ursolic acid by phase inversion technique.
Journal of Hunan University Natural Sciences, 37, (2), 60-63, (2010)
   

Mao CY et al., The controlled drug release by pH-sensitive molecularly imprinted nanospheres for enhanced antibacterial activity.
Materials Science and Engineering: C, 77, 84-91, (2017)
   

Yang XL

Yang XL et al., Molecular Imprinting Technique and Its Application in Separating and Assaying Functional Components in Tea.
Journal of Tea, 34, (1), 15-18, 55, (2008)
   

Hu XH et al., Hydrogel Contact Lens for Extended Delivery of Ophthalmic Drugs.
International Journal of Polymer Science, 2011, Article ID 814163-(2011)
   

Liu J et al., Synthesis and application of ion-imprinted polymer particles for solid-phase extraction and determination of trace scandium by ICP-MS in different matrices.
Analytical Methods, 5, (7), 1811-1817, (2013)
   

Yang MX et al., Preparation of a bifunctional pyrazosulfuron-ethyl imprinted polymer with hydrophilic external layers by reversible addition-fragmentation chain transfer polymerization and its application in the sulfonylurea residue analysis.
Talanta, 114, 143-151, (2013)
   

Wang S et al., Preparation of magnetic molecularly imprinted polymer beads and their recognition for baicalein.
RSC Advances, 5, (11), 8028-8036, (2015)
   

Liu TW et al., Molecular imprinted S-nitrosothiols nanoparticles for nitric oxide control release as cancer target chemotherapy.
Colloids and Surfaces B: Biointerfaces, 173, 356-365, (2019)
   

Yang XL et al., A molecularly imprinted biosensor based on water-compatible and electroactive polymeric nanoparticles for lysozyme detection.
Talanta, 236, Article122891-(2022)
   

Yang XM

Qi XL et al., Development of a broad selective molecularly imprinted polymers-based solid phase extraction of contraceptive drug levonorgestrel from water samples.
International Journal of Environmental Analytical Chemistry, 92, (3), 268-278, (2012)
   

Fang T et al., Ultrasensitive photoelectrochemical determination of chromium(VI) in water samples by ion-imprinted/formate anion-incorporated graphitic carbon nitride nanostructured hybrid.
Journal of Hazardous Materials, 312, 106-113, (2016)
   

Yang XM et al., Electrospun template directed molecularly imprinted nanofibers incorporated with BiOI nanoflake arrays as photoactive electrode for photoelectrochemical detection of triphenyl phosphate.
Biosensors and Bioelectronics, 92, 61-67, (2017)
   

Fan JP et al., Preparation, characterization, and application of multiple stimuli-responsive rattle-type magnetic hollow molecular imprinted poly (ionic liquids) nanospheres (Fe3O4@void@PILMIP) for specific recognition of protein.
Chemical Engineering Journal, 337, 722-732, (2018)
   

Fan JP et al., Preparation of a novel supermacroporous molecularly imprinted cryogel membrane with a specific ionic liquid for protein recognition and permselectivity.
Journal of Applied Polymer Science, 135, (41), ArticleNo46740-(2018)
   

Yang XQ

Chen X et al., Liquid chromatography of active principles in Sophora flavescens root.
Journal of Chromatography B, 812, (1-2), 149-163, (2004)
   

Wang GS et al., Preparation and recognition properties of GA3-imprinted polymers/membranes.
Chemical Research and Application, 21, (2), 141-145, (2009)
   

Wang GS et al., Molecular imprinted solid-phase extraction of huperzine A from Huperzia Serrata.
Journal of Applied Polymer Science, 113, (5), 3049-3058, (2009)
   

Zhu XF et al., Property and mechanism study of hesperidin imprinted polymer.
Chemical Research and Application, 21, (11), 1516-1520, (2009)
   

Zhu XF et al., Preparation and Recognition Mechanism of Gallic Acid Imprinted Polymers.
Helvetica Chimica Acta, 92, (1), 78-87, (2009)
   

Yang XQ et al., Selective enrichment and separation of phosphotyrosine peptides by thermosensitive molecularly imprinted polymers.
Journal of Separation Science, 39, (2), 419-426, (2016)
   

Yuan B et al., A novel recycling system for nano-magnetic molecular imprinting immobilised cellulases: Synergistic recovery of anthocyanin from fruit and vegetable waste.
Bioresource Technology, 222, 14-23, (2016)
   

Yang XR

Cheng ZL et al., Capacitive detection of glucose using molecularly imprinted polymers.
Biosensors and Bioelectronics, 16, (3), 179-185, (2001)
   

Song W et al., Dopamine sensor based on molecularly imprinted electrosynthesized polymers.
Journal of Solid State Electrochemistry, 14, (10), 1909-1914, (2010)
   

Yang XX

Tang YT et al., Well-defined nanostructured surface-imprinted polymers for the highly selective enrichment of low-abundance protein in mammalian cell extract.
New Journal of Chemistry, 40, (12), 10545-10553, (2016)
   

Yang XX et al., Screening for the bioactive constituents of traditional Chinese medicines-progress and challenges.
RSC Advances, 7, (6), 3089-3100, (2017)
   

Hu YT et al., A simple on-line detection system based on fiber-optic sensing for the realtime monitoring of fixed bed adsorption processes of molecularly imprinted polymers.
Journal of Chromatography A, 1622, Article461112-(2020)
   

Yang XY

Sun LN et al., Synthesis and Applications of Molecularly Imprinted Polymers Modified TiO2 Nanomaterials: A Review.
Polymers, 10, (11), ArticleNo1248-(2018)
   

Yang XY et al., Dual Functional Molecular Imprinted Polymer-Modified Organometal Lead Halide Perovskite: Synthesis and Application for Photoelectrochemical Sensing of Salicylic Acid.
Analytical Chemistry, 91, (15), 9356-9360, (2019)
   

Xiong XX et al., In situ grown TiO2 nanorod arrays functionalized by molecularly imprinted polymers for salicylic acid recognition and detection.
Journal of Electroanalytical Chemistry, 873, Article114394-(2020)
   

Yang XY et al., Molecularly imprinted polymers and PEG double engineered perovskite: an efficient platform for constructing aqueous solution feasible photoelectrochemical sensor.
Sensors and Actuators B: Chemical, 304, Article127321-(2020)
   

Sui GQ et al., Synthesis of SERS imprinted membrane based on Ag/ESM with different morphologies for selective detection of antibiotics in aqueous sample.
Optical Materials, 121, Article111581-(2021)
   

Yang Y

Clavier CW et al., A method for the preparation of transparent mesoporous silica sol-gel monoliths containing grafted organic functional groups.
Journal of Materials Chemistry, 15, (24), 2356-2361, (2005)
   

Guo YS et al., Study on specific solid phase extraction of anticholinergic drugs by molecularly imprinted polymers with structural analogues as templates.
Chinese Journal of Analytical Chemistry, 34, (3), 347-350, (2006)
   

Fu XJ et al., A novel chiral separation material: polymerized organogel formed by chiral gelators for the separation of D- and L-phenylalanine.
Journal of Molecular Recognition, 20, (4), 238-244, (2007)
   

Wang J et al., Preparation of Pirimicarb Molecular-Imprinted PMAA on Surface of Silica Gel Particles and Binding Characteristic.
Journal of Functional Polymers, 21, (1), 44-49, (2008)
   

Yang Y et al., Molecularly imprinted polymer using [beta]-cyclodextrin as functional monomer for the efficient recognition of bilirubin.
Analytica Chimica Acta, 606, (1), 92-97, (2008)
   

Gao BJ et al., Studies of Imprinting Conditions and Application Performance of Pirimicarb Molecule-Imprinted Material Prepared Using a Novel Surface-Imprinting Technique.
Chromatographia, 69, (11), 1353-1361, (2009)
   

Yang Y et al., Preparation and Properties of Trichlorfon Molecularly Imprinted Polymers.
Journal of Huaqiao University (Natural Science), 30, (3), 284-288, (2009)
   

Yang Y et al., An investigation of porous structure in molecularly imprinted polymer for sensor development: Non-linear fluorescence quenching of 17[beta]-estradiol bound inside MIP submicron particles by sodium nitrite and methacrylamide.
Journal of Photochemistry and Photobiology A-Chemistry, 213, (2-3), 123-128, (2010)
   

Guo Y et al., Preparation of a PTE simulacrum based on surface molecular imprinting.
Chinese Chemical Letters, 22, (4), 493-496, (2011)
   

Guo Y et al., Core/shell molecular imprinting microparticles prepared using RAFT technology for degradation of paraoxon.
Macromolecular Research, 19, (11), 1202-1209, (2011)
   

Lai EPC et al., Optimization of Molecularly Imprinted Polymer Method for Rapid Screening of 17[beta]-Estradiol in Water by Fluorescence Quenching.
International Journal of Analytical Chemistry, 2011, Article ID 214747-(2011)
   

Zhou DZ et al., Surface imprinted macroporous film for high performance protein recognition in combination with quartz crystal microbalance.
Sensors and Actuators B: Chemical, 153, (1), 96-102, (2011)
   

Yang Y et al., Preparation and Catalytic Performances of a Molecularly Imprinted Ru-Complex Catalyst with an NH2 Binding Site on a SiO2 Surface.
Chemistry - A European Journal, 18, (4), 1142-1153, (2012)
   

Li YC et al., Novel Electrochemical Sensing Platform Based on a Molecularly Imprinted Polymer Decorated 3D Nanoporous Nickel Skeleton for Ultrasensitive and Selective Determination of Metronidazole.
ACS Applied Materials & Interfaces, 7, (28), 15474-15480, (2015)
   

Liu X et al., Electrochemical Sensor based on Imprinted Sol-Gel Polymer on Au NPs-MWCNTs-CS Modified Electrode for the Determination of Acrylamide.
Food Analytical Methods, 9, (1), 114-121, (2016)
   

Liu RH et al., Preparation of Sialic Acid-Imprinted Fluorescent Conjugated Nanoparticles and Their Application for Targeted Cancer Cell Imaging.
ACS Applied Materials & Interfaces, 9, (3), 3006-3015, (2017)
   

Li GR et al., A study on the preparation and application of a core-shell surface imprinted uranyl magnetic chelating adsorbent.
RSC Advances, 8, (65), 37401-37409, (2018)
   

Yang Y et al., Synthesis of a surface molecular imprinting polymer based on silica and its application in the identification of nitrocellulose.
RSC Advances, 8, (18), 9802-9811, (2018)
   

Chen SJ et al., Preparation and application of magnetic molecular imprinted polymers for extraction of cephalexin from pork and milk samples.
Journal of Chromatography A, 1602, 124-134, (2019)
   

Chen SJ et al., A phosphorescent probe for cephalexin consisting of mesoporous thioglycolic acid-modified Mn:ZnS quantum dots coated with a molecularly imprinted polymer.
Microchimica Acta, 187, (1), Article40-(2019)
   

Li SH et al., Fluorometric aptasensor for cadmium(II) by using an aptamer-imprinted polymer as the recognition element.
Microchimica Acta, 186, (12), Article823-(2019)
   

Ma XH et al., Synthesis of Zr-coordinated amide porphyrin-based two-dimensional covalent organic framework at liquid-liquid interface for electrochemical sensing of tetracycline.
Biosensors and Bioelectronics, 146, Article111734-(2019)
   

Meng XJ et al., Preparation of an Electrochemical Sensor Based on Surface Molecularly Imprinted Polymers Modified Electrode and its Application in Detection of Nitrocellulose.
Propellants, Explosives, Pyrotechnics, 44, (7), 807-815, (2019)
   

Chen SJ et al., Preparation and characterization of magnetic molecular imprinted polymers with ionic liquid for the extraction of carbaryl in food.
Analytical and Bioanalytical Chemistry, 412, (5), 1049-1062, (2020)
   

Li SH et al., Novel molecularly imprinted amoxicillin sensor based on a dual recognition and dual detection strategy.
Analytica Chimica Acta, 1127, 69-78, (2020)
   

Wang D et al., Molecular Simulation-Aided Preparation of Molecularly Imprinted Polymeric Solid-Phase Microextraction Coatings for Kojic Acid Detection in Wheat Starch and Flour Samples.
Food Analytical Methods, 14, (10), 2076-2087, (2021)
   

Yang YC

Xu J et al., Preparation of the sensor for determination of DEP based on molecularly imprinted polymer.
Chemical Research and Application, 19, (9), 1021-1024, (2007)
   

Yang YF

Che AF et al., Molecular imprinting fibrous membranes of poly(acrylonitrile-co-acrylic acid) prepared by electrospinning.
Chemical Research in Chinese Universities, 22, (3), 390-393, (2006)
   

Yang YF et al., Advances in surface molecular imprinting.
Chemistry Bulletin, 70, (5), 324-330, (2007)
   

Long CY et al., Determination of multi-residue for malachite green, gentian violet and their metabolites in aquatic products by high-performance liquid chromatography coupled with molecularly imprinted solid-phase extraction.
Journal of Chromatography A, 1216, (12), 2275-2281, (2009)
   

Long CY et al., Synthesis and characterization of a novel molecularly imprinted polymer for simultaneous extraction and determination of water-soluble and fat-soluble synthetic colorants in chilli products by solid phase extraction and high performance liquid chromatography.
Journal of Chromatography A, 1216, (47), 8379-8385, (2009)
   

Yang YF et al., Determination of nine fluoroquinolone residues in chicken by ultra performance liquid chromatography-tandem mass spectrometry coupled with molecularly imprinted solid phase extraction.
Chinese Journal of Chromatography, 34, (11), 1063-1069, (2016)
   

Luo X et al., Electrochemical sensor based on lead ion-imprinted polymer particles for ultra-trace determination of lead ions in different real samples.
RSC Advances, 7, (26), 16033-16040, (2017)
   

Xu WZ et al., Computer-aided design and synthesis of CdTe@SiO2 core-shell molecularly imprinted polymers as a fluorescent sensor for the selective determination of sulfamethoxazole in milk and lake water.
Journal of Separation Science, 40, (5), 1091-1098, (2017)
   

Xu WZ et al., Synthesis of surface molecular imprinted polymers based on carboxyl-modified silica nanoparticles with the selective detection of dibutyl phthalate from tap water samples.
Applied Surface Science, 426, 1075-1083, (2017)
   

Xu WZ et al., A magnetic fluorescence molecularly imprinted polymer sensor with selectivity for dibutyl phthalate via Mn doped ZnS quantum dots.
RSC Advances, 7, (81), 51632-51639, (2017)
   

Zhou ZP et al., Synthesis of surface molecular imprinting polymer on SiO2-coated CdTe quantum dots as sensor for selective detection of sulfadimidine.
Applied Surface Science, 404, 188-196, (2017)
   

Wang YY et al., Surface molecularly imprinted polymers based ZnO quantum dots as fluorescence sensors for detection of diethylhexyl phthalate with high sensitivity and selectivity.
Polymer International, 67, (8), 1003-1010, (2018)
   

Sun Y et al., Fabrication of a thermal responsive hemoglobin (Hb) biosensor via Hb-catalyzed eATRP on the surface of ZnO nanoflowers.
Journal of Electroanalytical Chemistry, 848, Article113346-(2019)
   

Liu XG et al., Preparation and Adsorption Properties of Lanthanum Ion MCM-41 Imprinted Polymers.
Journal of Inorganic and Organometallic Polymers and Materials, 30, (5), 1483-1489, (2020)
   

Sun Y et al., Preparation of hemoglobin (Hb)-imprinted poly(ionic liquid)s via Hb-catalyzed eATRP on gold nanodendrites.
Analytical and Bioanalytical Chemistry, 412, (4), 983-991, (2020)
   

Yang YH

Chen W et al., A hydrochlorothiazide-imprinted polymer.
Analytical Letters, 33, 809-818, (2000)
   

Wu ZY et al., Sensitive nicotine sensor based on molecularly imprinted electropolymer of o-aminophenol.
Journal of Hunan University Natural Sciences, 32, (3), 10-14, (2005)
   

Cheng SL et al., Separation of isoflavones from Radix Pueraria by molecular imprinting technology.
Chinese Traditional Patent Medicine, 28, (10), 1484-1488, (2006)
   

Wu ZY et al., A sensitive nicotine sensor based on molecularly imprinted electropolymer of o-aminophenol.
Frontiers of Chemistry in China, 1, (2), 183-187, (2006)
   

Cheng SL et al., Preparation and adsorption characteristics of amino acids magnetic molecularly imprinted plymer microspheres.
Journal of Functional Materials, 43, (22), 3101-3105, (2012)
   

Bai HP et al., A Novel Sensitive Electrochemical Sensor for Podophyllotoxin Assay Based on the Molecularly Imprinted Poly-o-Phenylenediamine Film.
Journal of Nanoscience and Nanotechnology, 15, (3), 2456-2463, (2015)
   

Gong CB et al., Photoresponsive hollow molecularly imprinted polymer for the determination of trace bisphenol A in water.
Journal of Colloid and Interface Science, 481, 236-244, (2016)
   

Gong CB et al., Photoresponsive hollow molecularly imprinted polymer for trace triamterene in biological samples.
Materials Science and Engineering: C, 76, 568-578, (2017)
   

Yan K et al., Highly Selective Self-Powered Sensing Platform for p-Nitrophenol Detection Constructed with a Photocathode-Based Photocatalytic Fuel Cell.
Analytical Chemistry, 89, (17), 8599-8603, (2017)
   

Yan K et al., A self-powered sensor based on molecularly imprinted polymer-coupled graphitic carbon nitride photoanode for selective detection of bisphenol A.
Sensors and Actuators B: Chemical, 259, 394-401, (2018)
   

Yang YH et al., A photoresponsive surface molecularly imprinted polymer shell for determination of trace griseofulvin in milk.
Materials Science and Engineering: C, 92, 365-373, (2018)
   

Zhou YQ et al., Preparation of Imazethapyr Surface Molecularly Imprinted Polymers for Its Selective Recognition of Imazethapyr in Soil Samples.
Journal of Analytical Methods in Chemistry, 2018, ArticleID7535417-(2018)
   

Gong CB et al., A photoresponsive molecularly imprinted polymer with rapid visible-light-induced photoswitching for 4-ethylphenol in red wine.
Materials Science and Engineering: C, 96, 661-668, (2019)
   

Ma R et al., Preparation and optimization of diatom-based cadmium ion-imprinted materials.
Journal of Molecular Structure, 1251, Article132044-(2022)
   

Zhang H et al., Study of ion-imprinted adsorbent materials on diatom-based Cr(VI) Surfaces.
Materials Letters, 308, Article131149-(2022)
   

Yang YJ

Fu XJ et al., A novel chiral separation material: polymerized organogel formed by chiral gelators for the separation of D- and L-phenylalanine.
Journal of Molecular Recognition, 20, (4), 238-244, (2007)
   

Li JY et al., Combinational Technology of Separation, Selection and Identification on Active Composition of Chinese Traditional Herb and Molecular Imprinting Technology.
Lishizhen Medicine and Materia Medica Research, 19, (12), 2901-2904, (2008)
   

Zhang SZ et al., Selective adsorption of D- and L-phenylalanine on molecularly-imprinted polymerized organogels formed using polymerizable gelator N-octadecyl maleamic acid.
Journal of Separation Science, 31, (21), 3782-3787, (2008)
   

Xiong Y et al., Selective Adsorption of D- and L-Phenylalanine on the Imprinted Polymerized Organogel Membranes.
Acta Chimica Sinica, 67, (5), 442-446, (2009)
   

Yang YJ et al., Affinity of Polymer-Supported Reagents for Lanthanides as a Function of Donor Atom Polarizability.
Industrial & Engineering Chemistry Research, 48, (13), 6173-6187, (2009)
   

Zhang SZ et al., Cholesterol Imprinted Polymerized Organogel Formed by Polymerizable Gelator and Adsorption Ability.
Acta Polymerica Sinica, (3), 244-248, (2009)
   

Lou DW et al., Preparation of Benzoic Acid Molecularly Imprinted Polymers and Its Adsorption Property.
Chinese Journal of Analytical Chemistry, 38, (3), 401-404, (2010)
   

Sun Y et al., Polymerized organogel particles formed and imprinted by chiral gelators and their selective adsorption for phenylalanine racemates.
Soft Matter, 7, (2), 348-350, (2011)
   

Yang YJ et al., Optimization of polymerization parameters for the sorption of oseltamivir onto molecularly imprinted polymers.
Analytical and Bioanalytical Chemistry, 400, (10), 3665-3674, (2011)
   

Li LP et al., Study on the Synthesis of Copper Ion Imprinted Polymer byUsing Cu(2+)-1, 10-Phenanthroline Complex as Template Molecules.
Journal of Yunnan University of The Nationalities (Natural Sciences Edition), 21, (1), 18-21, (2012)
   

Lan X et al., Adsorption of tartaric acid-cadmium complex by imprinted chitosan biopolymer.
Desalination and Water Treatment, 51, (19-21), 3883-3888, (2013)
   

Yang YJ et al., A Non-Biological Method for Screening Active Components against Influenza Virus from Traditional Chinese Medicine by Coupling a LC Column with Oseltamivir Molecularly Imprinted Polymers.
PLoS ONE, 8, (12), e84458-(2013)
   

Yang YJ et al., Molecularly Imprinted Solid-Phase Extraction for Selective Extraction of Bisphenol Analogues in Beverages and Canned Food.
Journal of Agricultural and Food Chemistry, 62, (46), 11130-11137, (2014)
   

Su YJ et al., Separation of bovine hemoglobin using novel magnetic molecular imprinted nanoparticles.
RSC Advances, 8, (11), 6192-6199, (2018)
   

Sun YH et al., Molecularly imprinted polymers fabricated using Janus particle-stabilized Pickering emulsions and charged monomer polymerization.
New Journal of Chemistry, 42, (9), 7355-7363, (2018)
   

Yang YJ et al., Constructing synergistic groups in porous aromatic frameworks for the selective removal and recovery of lead(ii) ions.
Journal of Materials Chemistry A, 6, (12), 5202-5207, (2018)
   

Yang YJ et al., Preparation and Evaluation of Oseltamivir Molecularly Imprinted Polymer Silica Gel as Liquid Chromatography Stationary Phase.
Molecules, 23, (8), ArticleNo1881-(2018)
   

Yuan Y et al., Molecularly Imprinted Porous Aromatic Frameworks and Their Composite Components for Selective Extraction of Uranium Ions.
Advanced Materials, 30, (12), ArticleNo1706507-(2018)
   

Yuan Y et al., Molecularly Imprinted Porous Aromatic Frameworks Serving as Porous Artificial Enzymes.
Advanced Materials, 30, (27), 1800069-(2018)
   

Li TH et al., Preparation and characterization of molecularly imprinted polymers based on [beta]-cyclodextrin-stabilized Pickering emulsion polymerization for selective recognition of erythromycin from river water and milk.
Journal of Separation Science, 43, (18), 3683-3690, (2020)
   

Liu H et al., Capsule-like molecular imprinted polymer nanoparticles for targeted and chemophotothermal synergistic cancer therapy.
Colloids and Surfaces B: Biointerfaces, 208, Article112126-(2021)
   

Wan QQ et al., A critical review of molecularly imprinted solid phase extraction technology.
Journal of Polymer Research, 28, (10), Article401-(2021)
   

Yang YK

Liu HL et al., A novel dual-function molecularly imprinted polymer on CdTe/ZnS quantum dots for highly selective and sensitive determination of ractopamine.
Analytica Chimica Acta, 762, 76-82, (2013)
   

Yang YK et al., Electrochemical sensor based on molecularly imprinted polymer film via sol-gel technology and multi-walled carbon nanotubes-chitosan functional layer for sensitive determination of quinoxaline-2-carboxylic acid.
Biosensors and Bioelectronics, 47, 475-481, (2013)
   

Kong LJ et al., Molecularly imprinted quartz crystal microbalance sensor based on poly(o-aminothiophenol) membrane and Au nanoparticles for ractopamine determination.
Biosensors and Bioelectronics, 51, 286-292, (2014)
   

Yang YK et al., Sensitive and selective electrochemical determination of quinoxaline-2-carboxylic acid based on bilayer of novel poly(pyrrole) functional composite using one-step electro-polymerization and molecularly imprinted poly(o-phenylenediamine).
Analytica Chimica Acta, 806, 136-143, (2014)
   

Pan MF et al., Molecularly imprinted biomimetic QCM sensor involving a poly(amidoamine) dendrimer as a functional monomer for the highly selective and sensitive determination of methimazole.
Sensors and Actuators B: Chemical, 207, (Part A), 588-595, (2015)
   

Yang YK et al., Prussian blue mediated amplification combined with signal enhancement of ordered mesoporous carbon for ultrasensitive and specific quantification of metolcarb by a three-dimensional molecularly imprinted electrochemical sensor.
Biosensors and Bioelectronics, 64, 247-254, (2015)
   

Fang GZ et al., Quartz crystal microbalance sensor based on molecularly imprinted polymer membrane and three-dimensional Au nanoparticles@mesoporous carbon CMK-3 functional composite for ultrasensitive and specific determination of citrinin.
Sensors and Actuators B: Chemical, 230, 272-280, (2016)
   

Fang GZ et al., Development and application of a quartz crystal microbalance sensor based on molecularly imprinted sol-gel polymer for rapid detection of patulin in foods.
Sensors and Actuators B: Chemical, 237, 239-246, (2016)
   

Guo T et al., Upconversion fluorescence metal-organic frameworks thermo-sensitive imprinted polymer for enrichment and sensing protein.
Biosensors and Bioelectronics, 79, 341-346, (2016)
   

Yang YK et al., Imprinting of molecular recognition sites combined with [pi]-donor-acceptor interactions using bis-aniline-crosslinked Au-CdSe/ZnS nanoparticles array on electrodes: Development of electrochemiluminescence sensor for the ultrasensitive and selective detection of 2-methyl-4-chlorophenoxyacetic acid.
Biosensors and Bioelectronics, 77, 1134-1143, (2016)
   

Yang YK et al., Preparation and evaluation of novel surface molecularly imprinted polymers by sol-gel process for online solid-phase extraction coupled with high performance liquid chromatography to detect trace patulin in fruit derived products.
RSC Advances, 6, (59), 54510-54517, (2016)
   

Yang YK et al., Electrochemiluminescence Analysis Based on Molecular Imprinting Technique.
Progress In Chemistry, 28, (9), 1351-1362, (2016)
   

Fang GZ et al., Development and application of molecularly imprinted quartz crystal microbalance sensor for rapid detection of metolcarb in foods.
Sensors and Actuators B: Chemical, 251, 720-728, (2017)
   

Yang YK et al., Electrochemiluminescent graphene quantum dots enhanced by MoS2 as sensing platform: a novel molecularly imprinted electrochemiluminescence sensor for 2-methyl-4-chlorophenoxyacetic acid assay.
Electrochimica Acta, 228, 107-113, (2017)
   

Yun YG et al., Molecularly imprinted electrodeposition o-aminothiophenol sensor for selective and sensitive determination of amantadine in animal-derived foods.
Sensors and Actuators B: Chemical, 238, 32-39, (2017)
   

Jin XC et al., A molecularly imprinted electrochemiluminescence sensor based on upconversion nanoparticles enhanced by electrodeposited rGO for selective and ultrasensitive detection of clenbuterol.
Biosensors and Bioelectronics, 102, 357-364, (2018)
   

Liu JM et al., Emerging functional nanomaterials for the detection of food contaminants.
Trends In Food Science & Technology, 71, 94-106, (2018)
   

Yang YK et al., Fluorometric microplate-based dimethoate assay using CdSe/ZnS quantum dots coated with a molecularly imprinted polymer.
Microchimica Acta, 186, (8), Article589-(2019)
   

Yang YK et al., Magnetic molecularly imprinted electrochemical sensors: A review.
Analytica Chimica Acta, 1106, 1-21, (2020)
   

Yang YK et al., Development of a molecularly imprinted photoelectrochemical sensing platform based on NH2-MIL-125(Ti)-TiO2 composite for the sensitive and selective determination of oxtetracycline.
Biosensors and Bioelectronics, 177, Article113000-(2021)
   

Yang YK et al., Surface molecularly imprinted magnetic MOFs: A novel platform coupled with magneto electrode for high throughput electrochemical sensing analysis of oxytetracycline in foods.
Food Chemistry, 363, Article130337-(2021)
   

Zhang M et al., A molecularly imprinted electrochemical sensor based on cationic intercalated two-dimensional titanium carbide nanosheets for sensitive and selective detection of triclosan in food samples.
Food Control, 132, Article108532-(2022)
   

Yang YL

Zhang X et al., Preparation and Characterization of a Molecularly Imprinted Polymer for Selective Recognition of Trichlorfon and Monocrotophos.
Journal of Macromolecular Science, Part B, 55, (4), 382-392, (2016)
   

Cheng WW et al., A facile electrochemical method for rapid determination of 3-chloropropane-1, 2-diol in soy sauce based on nanoporous gold capped with molecularly imprinted polymer.
Food Control, 134, Article108750-(2022)
   

Yang YP

Yang YP et al., Mesoporous yolk-shell structure molecularly imprinted magnetic polymers for the extraction and detection of 17[beta]-estradiol.
Analytical Methods, 12, (4), 507-513, (2020)
   

Yang YQ

Lai XQ et al., Preparation and Characteristics of the Yttrium(III)-ion Complex Molecularly Imprinted Polymer.
Acta Chimica Sinica, 67, (8), 863-868, (2009)
   

Yang YQ et al., Glucose sensors based on electrodeposition of molecularly imprinted polymeric micelles: A novel strategy for MIP sensors.
Biosensors and Bioelectronics, 26, (5), 2607-2612, (2011)
   

Fan CH et al., Research on Amphiphilic Copolymer MIP micelles electrochemical sensor.
Acta Chimica Sinica, 71, (6), 934-940, (2013)
   

Li SS et al., One-step electrodeposition of a molecularly imprinting chitosan/phenyltrimethoxysilane/AuNPs hybrid film and its application in the selective determination of p-nitrophenol.
Analyst, 138, (9), 2761-2768, (2013)
   

Yang YQ et al., Epitope imprinted polymer coating CdTe quantum dots for specific recognition and direct fluorescent quantification of the target protein bovine serum albumin.
Biosensors and Bioelectronics, 54, 266-272, (2014)
   

Niu H et al., Efficient one-pot synthesis of hydrophilic and fluorescent molecularly imprinted polymer nanoparticles for direct drug quantification in real biological samples.
Biosensors and Bioelectronics, 74, 440-446, (2015)
   

Yang YQ et al., Direct and Highly Selective Drug Optosensing in Real, Undiluted Biological Samples with Quantum-Dot-Labeled Hydrophilic Molecularly Imprinted Polymer Microparticles.
ACS Applied Materials & Interfaces, 8, (24), 15741-15749, (2016)
   

Yang YQ et al., One-pot synthesis of quantum dot-labeled hydrophilic molecularly imprinted polymer nanoparticles for direct optosensing of folic acid in real, undiluted biological samples.
Biosensors and Bioelectronics, 86, 580-587, (2016)
   

Zhang HQ et al., Book chapter, Molecular Imprinting Technique for Biomimetic Sensing and Diagnostics, 
In: Biomedical Nanomaterials, Zhao YL, Shen YQ (Eds.) Wiley: Weinheim, Ch. 11, 283-326, (2016)
   

Yang SR et al., A Novel Rutin Electrochemical Sensor Using Reduced Graphene Oxide/Magnetite/Silver Nanoparticle-Molecularly Imprinted Polymer Composite Modified Electrode.
International Journal of Electrochemical Science, 13, 2483-2497, (2018)
   

Yao ZF et al., Electrochemical quercetin sensor based on a nanocomposite consisting of magnetized reduced graphene oxide, silver nanoparticles and a molecularly imprinted polymer on a screen-printed electrode.
Microchimica Acta, 185, (1), ArticleNo70-(2018)
   

Yang YS

Yang YS et al., Study on preparation and performance of rutin molecularly imprinted polymers.
Science and Technology of Food Industry, 33, (2), 119-121, 125, (2012)
   

Liu XL et al., Enhanced and Selective Degradation of Ciprofloxacin Performance with Surface Molecular Imprinted Cds Photocatalyst by Microwave-Assisted Method.
Fresenius Environmental Bulletin, 26, (1A), 1033-1040, (2017)
   

Zhang LX et al., Rapid and ultrasensitive detection of ellagic acid by integrating boronate-affinity controllable-oriented imprinted magnetic nanoparticle and boronic acid-modified / polyethylene glycol-coated allochroic-graphene oxide.
Sensors and Actuators B: Chemical, 345, Article130400-(2021)
   

Yang YT

He FY et al., Exploration of research approaches of Chinese medicine's pharmacology based on "imprinting templates" (medical element) of supramolecules.
China Journal of Chinese Materia Medica, 40, (21), 4313-4318, (2015)
   

He FY et al., Impact of "imprinting templates" characteristics of traditional Chinese medicine injection supramolecules on (anaphylactoid) hypersensibility.
China Journal of Chinese Materia Medica, 41, (2), 345-349, (2016)
   

He FY et al., Dispute for Japanese (wild) honeysuckle flower based on supermolecular imprinting templates.
China Journal of Chinese Materia Medica, 41, (6), 1152-1160, (2016)
   

Yang YT et al., Chinese medicine preparation supramolecular imprinting templates based on in vitro release characteristics of BYHW sustained-release tablet.
China Journal of Chinese Materia Medica, 41, (6), 1040-1045, (2016)
   

Yang YW

Liu LY et al., An Electrochemical Sensor for Diphenylamine Detection Based on Reduced Graphene Oxide/Fe3O4-Molecularly Imprinted Polymer with 1, 4-Butanediyl-3, 3'-bis-l-vinylimidazolium Dihexafluorophosphate Ionic Liquid as Cross-Linker.
Polymers, 10, (12), Article1329-(2018)
   

Lu X et al., Rapid and reliable determination of p-nitroaniline in wastewater by molecularly imprinted fluorescent polymeric ionic liquid microspheres.
Biosensors and Bioelectronics, 99, 47-55, (2018)
   

Yang YW et al., Voltammetric determination of 5-hydroxytryptamine based on the use of platinum nanoparticles coated with molecularly imprinted silica.
Microchimica Acta, 185, (4), ArticleNo219-(2018)
   

Zhang ZL et al., Preparation of molecularly imprinted ordered mesoporous silica for rapid and selective separation of trace bisphenol A from water samples.
Applied Surface Science, 448, 380-388, (2018)
   

Zhu XD et al., A new composite of graphene and molecularly imprinted polymer based on ionic liquids as functional monomer and cross-linker for electrochemical sensing 6-benzylaminopurine.
Biosensors and Bioelectronics, 108, 38-45, (2018)
   

Xie W et al., Highly sensitive and selective detection of 4-nitroaniline in water by a novel fluorescent sensor based on molecularly imprinted poly(ionic liquid).
Analytical and Bioanalytical Chemistry, 412, (23), 5653-5661, (2020)
   

Lei XL et al., A novel composite of conductive metal organic framework and molecularly imprinted poly (ionic liquid) for highly sensitive electrochemical detection of bisphenol A.
Sensors and Actuators B: Chemical, 339, Article129885-(2021)
   

Yang YX

Wang LL et al., Study on adsorption behavior and mechanism of copper(II) ion imprinted polymer.
Metallurgical Analysis, 30, (2), 17-22, (2010)
   

Li J et al., Improved detection and recognition of glycoproteins using fluorescent polymers with a molecular imprint based on glycopeptides.
Microchimica Acta, 188, (12), 439-(2021)
   

Song WQ et al., Constructing High-Recognition Protein-Imprinted Materials Using "Specially Designed" Block Macromolecular Chains as Functional Monomers and Crosslinkers.
ACS Applied Materials & Interfaces, 13, (45), 54428-54438, (2021)
   

Yang YY

Wang YQ et al., Bisphenol A sensing based on surface molecularly imprinted, ordered mesoporous silica.
Electrochimica Acta, 56, (5), 2105-2109, (2011)
   

Huang YY et al., Rapid and sensitive detection of trace malachite green and its metabolite in aquatic products using molecularly imprinted polymer-coated wooden-tip electrospray ionization mass spectrometry.
RSC Advances, 7, (82), 52091-52100, (2017)
   

Yuan GY et al., A novel ion-imprinted polymer induced by the glycylglycine modified metal-organic framework for the selective removal of Co(II) from aqueous solutions.
Chemical Engineering Journal, 333, 280-288, (2018)
   

Liu YH et al., Sensitive analysis of trace macrolide antibiotics in complex food samples by ambient mass spectrometry with molecularly imprinted polymer-coated wooden tips.
Talanta, 204, 238-247, (2019)
   

Li YT et al., Electrochemical fabrication of reduced MoS2-based portable molecular imprinting nanoprobe for selective SERS determination of theophylline.
Microchimica Acta, 187, (4), Article203-(2020)
   

Dong CY et al., Molecularly imprinted polymers by the surface imprinting technique.
European Polymer Journal, 145, Article110231-(2021)
   

Yang YY et al., Molecularly imprinted solid-phase extraction of Chikusetsu saponin IVa from Panacis majoris Rhizoma.
Journal of Separation Science, 44, (19), 3665-3676, (2021)
   

Yang YY et al., Electrokinetic Preseparation and Molecularly Imprinted Trapping for Highly Selective SERS Detection of Charged Phthalate Plasticizers.
Analytical Chemistry, 93, (2), 946-955, (2021)
   

Yang YZ

Schwarz LJ et al., Enrichment of (E)-Resveratrol from Peanut Byproduct with Molecularly Imprinted Polymers.
Journal of Agricultural and Food Chemistry, 59, (8), 3539-3543, (2011)
   

Yang YZ et al., Molecularly imprinted polymer on carbon microsphere surfaces for adsorbing dibenzothiophene.
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 377, (1-3), 379-385, (2011)
   

Gao T et al., Preparation and characterization of photoresponsive organic-inorganic hybrid molecularly imprinted polymers.
Chemical Journal of Chinese Universities, 33, (12), 2801-2808, (2012)
   

Yang YZ et al., Grafting molecularly imprinted poly(2-acrylamido-2-methylpropanesulfonic acid) onto the surface of carbon microspheres.
Applied Surface Science, 258, (17), 6441-6450, (2012)
   

Gong CB et al., The preparation and characterization of photo-responsive sol-gel materials for 2, 4-dichlorophenoxyacetic acid by surface imprinting.
Journal of Sol-Gel Science and Technology, 67, (3), 442-450, (2013)
   

Hashim SNNS et al., Rapid solid-phase extraction and analysis of resveratrol and other polyphenols in red wine.
Journal of Chromatography A, 1313, 284-290, (2013)
   

Liu WF et al., Reactive carbon microspheres prepared by surface-grafting 4-(chloromethyl)phenyltrimethoxysilane for preparing molecularly imprinted polymer.
Applied Surface Science, 277, 146-154, (2013)
   

Duan FF et al., Preparation and Evaluation of Water-Compatible Surface Molecularly Imprinted Polymers for Selective Adsorption of Bisphenol A from Aqueous Solution.
Industrial & Engineering Chemistry Research, 53, (37), 14291-14300, (2014)
   

Duan FF et al., Efficient adsorptive removal of dibenzothiophene by graphene oxide-based surface molecularly imprinted polymer.
RSC Advances, 4, (3), 1469-1475, (2014)
   

Liu WF et al., Synthesis and characterization of dibenzothiophene imprinted polymers on the surface of iniferter-modified carbon microspheres.
Materials Chemistry and Physics, 148, (3), 605-613, (2014)
   

Liu WF et al., Selective removal of benzothiophene and dibenzothiophene from gasoline using double-template molecularly imprinted polymers on the surface of carbon microspheres.
Fuel, 117, Part A, 184-190, (2014)
   

Yang YZ et al., Recent advances in molecular imprinting technology for the deep desulfurization of fuel oils.
Carbon, 71, 343-(2014)
   

Yang YZ et al., Recent advances in molecular imprinting technology for the deep desulfurization of fuel oils.
New Carbon Materials, 29, (1), 1-14, (2014)
   

Yang YZ et al., Ultrasensitive detection of bisphenol A in aqueous media using photoresponsive surface molecular imprinting polymer microspheres.
New Journal of Chemistry, 38, (4), 1780-1788, (2014)
   

Li LF et al., Preparation and characterization of 5-fluorouracil surface-imprinted thermosensitive magnetic microspheres.
Monatshefte für Chemie - Chemical Monthly, 146, (3), 441-447, (2015)
   

Li ZY et al., Photocontrolled solid-phase extraction of guanine from complex samples using a novel photoresponsive molecularly imprinted polymer.
Food Chemistry, 172, 56-62, (2015)
   

Qin L et al., Functional monomer screening and preparation of dibenzothiophene-imprinted polymers on the surface of carbon microsphere.
Monatshefte für Chemie - Chemical Monthly, 146, (3), 449-458, (2015)
   

Xu F et al., Immunoassay of chemical contaminants in milk: A review.
Journal of Integrative Agriculture, 14, (11), 2282-2295, (2015)
   

Duan FF et al., Water-compatible surface molecularly imprinted polymers with synergy of bi-functional monomers for enhanced selective adsorption of bisphenol A from aqueous solution.
Environmental Science: Nano, 3, (1), 213-222, (2016)
   

Gong CB et al., Photoresponsive hollow molecularly imprinted polymer for the determination of trace bisphenol A in water.
Journal of Colloid and Interface Science, 481, 236-244, (2016)
   

Hashim SNNS et al., Recovery of ergosterol from the medicinal mushroom, Ganoderma tsugae var. Janniae, with a molecularly imprinted polymer derived from a cleavable monomer-template composite.
Journal of Chromatography A, 1468, 1-9, (2016)
   

Li LF et al., Temperature and magnetism bi-responsive molecularly imprinted polymers: Preparation, adsorption mechanism and properties as drug delivery system for sustained release of 5-fluorouracil.
Materials Science and Engineering: C, 61, 158-168, (2016)
   

Liu WF et al., Molecularly imprinted polymers on the surface of porous carbon microspheres for capturing dibenzothiophene.
Microchimica Acta, 183, (3), 1153-1160, (2016)
   

Qin L et al., Surface molecularly imprinted polymers grafted on ordered mesoporous carbon nanospheres for fuel desulfurization.
RSC Advances, 6, (15), 12504-12513, (2016)
   

Qin L et al., Porous Carbon Microspheres: An Excellent Support To Prepare Surface Molecularly Imprinted Polymers for Selective Removal of Dibenzothiophene in Fuel Oil.
Industrial & Engineering Chemistry Research, 55, (6), 1710-1719, (2016)
   

Kulsing C et al., Use of peak sharpening effects to improve the separation of chiral compounds with molecularly imprinted porous polymer layer open-tubular capillaries.
Electrophoresis, 38, (8), 1179-1187, (2017)
   

Zhang L et al., Recognition of 5-fluorouracil by thermosensitive magnetic surface molecularly imprinted microspheres designed using a computational approach.
Journal of Applied Polymer Science, 134, (43), ArticleNo45468-(2017)
   

Liu WF et al., Thermo-responsive ion imprinted polymer on the surface of magnetic carbon microspheres for identification and removal of low-concentrations of Cu2+.
Environmental Chemistry, 15, (5), 306-316, (2018)
   

Zhao XF et al., A molecularly-imprinted polymer decorated on graphene oxide for the selective recognition of quercetin.
New Carbon Materials, 33, (6), 529-543, (2018)
   

Hashim SNNS et al., Parallel enrichment of polyphenols and phytosterols from Pinot noir grape seeds with molecularly imprinted polymers and analysis by capillary high-performance liquid chromatography electrospray ionisation tandem mass spectrometry.
Talanta, 208, Article120397-(2020)
   

Qu Y et al., Multilayered molecularly imprinted composite membrane based on porous carbon nanospheres/pDA cooperative structure for selective adsorption and separation of phenol.
Separation and Purification Technology, 280, Article119915-(2022)
   

Yang Z

Lai JP et al., Progresses on Synthesis Methods of Molecularly Imprinted Microspheres and Their Applications in Solid phase Extraction.
Journal of Instrumental Analysis, 31, (9), 1161-1169, (2012)
   

Yang Z et al., Enhancement of protein imprint via computational guided electropolymerization.
Abstracts of Papers of the American Chemical Society, 246, (BIOL), 161-(2013)
   

Li XQ et al., Evaluation of matrix effect in isotope dilution mass spectrometry based on quantitative analysis of chloramphenicol residues in milk powder.
Analytica Chimica Acta, 807, 75-83, (2014)
   

Yang Z et al., Molecularly Imprinted Sensor Based on Lead-Gallic Acid Complexes and Its Application.
Journal of Analytical Science, 31, (4), 470-474, (2015)
   

Yang Z et al., Selective Adsorption of Di(2-ethylhexyl) Phthalate by Surface Imprinted Polymers with Modified Silica Gel as Functional Support.
Journal of the Chemical Society of Pakistan, 37, (5), 939-949, (2015)
   

Chen JF et al., Theoretical analysis of a high performance protein imprint on a nanosensor.
Sensing and Bio-Sensing Research, 7, 12-19, (2016)
   

Piletsky SS et al., Development of molecularly imprinted polymers specific for blood antigens for application in antibody-free blood typing.
Chemical Communications, 53, (11), 1793-1796, (2017)
   

Hu C et al., Extraction of the toluene exposure biomarkers hippuric acid and methylhippuric acid using a magnetic molecularly imprinted polymer, and their quantitation by LC-MS/MS.
Microchimica Acta, 186, (3), Article135-(2019)
   

Tang JW et al., Trace analysis of estrogens in milk samples by molecularly imprinted solid phase extraction with genistein as a dummy template molecule and high-performance liquid chromatography-tandem mass spectrometry.
Steroids, 145, 23-31, (2019)
   

Yin N et al., Carbon Nanotube Facilitated Interface Formation for Enhanced Protein Sensing in Electrosynthesized Molecular Imprinting.
ACS Applied Bio Materials, 2, (10), 4604-4611, (2019)
   

Yang ZC

Yang ZC et al., Temperature-sensitive molecularly imprinted hydrogels.
Chemical Industry and Engineering Progress, 33, (1), 117-123, (2014)
   

Chen KC et al., A fluorescent glycosyl-imprinted polymer for pH and temperature regulated sensing of target glycopeptide antibiotic.
Biosensors and Bioelectronics, 94, 609-615, (2017)
   

Qi M et al., Adsorption and Electrochemical Detection of Bovine Serum Albumin Imprinted Calcium Alginate Hydrogel Membrane.
Polymers, 11, (4), ArticleNo622-(2019)
   

Yang ZG

Yang ZG et al., Molecular imprinted polymers of dibenzoyl-L-tartaric acid with recognition properties prepared by thermal polymerization method. II: Characterizing molecular recognition properties and their thermodynamics.
Journal of East China University of Science and Technology, 31, (5), 585-588, (2005)
   

Yang ZG et al., Study on the Molecular Imprinted Polymers with Recognition Properties Towards to Dibenzoyl-tartaric Acid Prepared by Photo-polymerization Method II. Characterizing Molecular Recognition Properties.
Journal of Functional Polymers, 18, (1), 42-46, (2005)
   

Yang ZG et al., Study on the Molecular Imprinted Polymers with Recognition Properties Towards to Dibenzoyl-L-tartaric Acid Prepared by Photo-Polymerization Method I. Photo-polymerization Conditions.
Journal of Functional Polymers, 18, (1), 36-41, (2005)
   

Yang ZG et al., Molecular imprinted polymers of dibenzoyl-L-tartaric acid with recognition properties prepared by thermal polymerization method. I: Optimizing the thermal polymerization conditions.
Journal of East China University of Science and Technology, 31, (5), 580-584+611, (2005)
   

Bing NC et al., Optimizing conditions of molecularly imprinted polymers of levofloxacin by thermal polymerization method.
Journal of Nanjing University of Technology (Natural Science Edition), 28, (1), 41-45, (2006)
   

Bing NC et al., Characteristics of Levofloxacin Imprinted Polymers Prepared via Thermal Polymerization Method.
Chinese Journal of Applied Chemistry, 23, (10), 1085-1089, (2006)
   

Wang XJ et al., Molecular recognition characteristics of complex imprinted polymer.
Journal of East China University of Science and Technology, 32, (6), 690-694, (2006)
   

Yang ZG et al., Pervaporation of molecular imprinted composite membranes to isopropanol/water system.
Journal of East China University of Science and Technology, 32, (12), 1373-1377, (2006)
   

Yang ZG et al., Study on the separation of ethanol/water using L-DBTA molecular imprinted composite membranes.
Polymer Materials Science and Engineering, 22, (6), 220-224, (2006)
   

Yang ZG et al., Research progress of molecularly imprinted membrane.
Chemical Industry and Engineering Progress, 25, (2), 131-135, (2006)
   

Bing NC et al., Levofloxacin-imprinted membranes for selective separation of ofloxacin under solid phase extraction conditions.
Journal of East China University of Science and Technology, 33, (2), 163-166+199, (2007)
   

Bing NC et al., Recognition properties of poly(vinylidene fluoride) hollow-fiber membranes modified by levofloxacin-imprinted polymers.
Journal of Applied Polymer Science, 106, (1), 71-76, (2007)
   

Wang XJ et al., Molecular recognition in aqueous media with molecular imprinting technique.
Progress In Chemistry, 19, (5), 805-812, (2007)
   

Wang XJ et al., Preparation and Aqueous Recognition of Metal Complex Imprinted Polymer Using N-vinyl-2-pyrrolidone as Functional Monomer.
Chinese Journal of Chemical Engineering, 15, (4), 595-599, (2007)
   

Yang ZG et al., Properties of D-tryptophane molecular imprinting composite membranes and its preparation.
Journal of Chemical Industry and Engineering (China), 58, (1), 125-129, (2007)
   

Yang ZG et al., Study on the preparation of dibenzoyl-L-tartaric acid (L-DBTA) imprinted composite membranes and its properties.
Journal of Chemical Engineering of Chinese Universities, 21, (5), 760-765, (2007)
   

Wang XJ et al., Molecularly imprinted membranes for the recognition of lovastatin acid in aqueous medium by a template analogue imprinting strategy.
Journal of Membrane Science, 313, (1-2), 97-105, (2008)
   

Wang XJ et al., Preparation and characterization of metal-complex imprinted PVDF hollow fiber membranes.
Journal of Applied Polymer Science, 109, (1), 64-73, (2008)
   

Yang ZH

Yu YJ et al., Quantitative real-time detection of carcinoembryonic antigen (CEA) from pancreatic cyst fluid using 3-D surface molecular imprinting.
Analyst, 141, (14), 4424-4431, (2016)
   

Yu YJ et al., Design of a molecular imprinting biosensor with multi-scale roughness for detection across a broad spectrum of biomolecules.
Analyst, 141, (19), 5607-5617, (2016)
   

Yang ZK

Yang ZK et al., Free-standing molecularly imprinted photonic hydrogels based on [beta]-cyclodextrin for the visual detection of l-tryptophan.
Analytical Methods, 7, (19), 8352-8359, (2015)
   

Yang ZK et al., Preparation and Characterization of L-Tryptophan Molecularly Imprinted Photonic Hydrogels.
Chemical Journal of Chinese Universities, 37, (1), 37-42, (2016)
   

Yang ZL

Xu ZG et al., Development of dual-templates molecularly imprinted stir bar sorptive extraction and its application for the analysis of environmental estrogens in water and plastic samples.
Journal of Chromatography A, 1358, 52-59, (2014)
   

Yang ZM

Xu Y et al., Preparation and adsorption of surface molecularly imprinted polymers.
Modern Chemical Industry, 29, (z1), 360-362, (2009)
   

Yang ZP

Xie YL et al., Molecular imprinting and adsorption of bovine serum albumin on nanocrystalline titania films.
Chinese Journal of Analytical Chemistry, 35, (4), 555-558, (2007)
   

Zhang CJ et al., Cellulose acetate-based molecularly imprinted polymeric membrane for separation of vanillin and o-vanillin.
Brazilian Journal of Chemical Engineering, 25, (2), 365-373, (2008)
   

Chen X et al., Potentiometric urea biosensor based on immobilization of urease onto molecularly imprinted TiO2 film.
Journal of Electroanalytical Chemistry, 635, (1), 1-6, (2009)
   

Yang ZP et al., Designing of MIP-based QCM sensor for the determination of Cu(II) ions in solution.
Sensors and Actuators B: Chemical, 142, (1), 210-215, (2009)
   

Yang ZP et al., Enhanced removal of bilirubin on molecularly imprinted titania film.
Colloids and Surfaces B: Biointerfaces, 87, (1), 187-191, (2011)
   

Yang ZP et al., Molecularly imprinted hydroxyapatite thin film for bilirubin recognition.
Biosensors and Bioelectronics, 29, (1), 167-171, (2011)
   

Yang ZP et al., Piezoelectric detection of bilirubin based on bilirubin-imprinted titania film electrode.
Analytical Biochemistry, 421, (1), 37-42, (2012)
   

Zhang CJ et al., Enhanced adsorption of atrazine from aqueous solution by molecularly imprinted TiO2 film.
Solid State Sciences, 14, (7), 777-781, (2012)
   

Yang ZP et al., Enhanced photocatalytic performance of molecularly imprinted hydroxyapatite thin film for bilirubin degradation.
Asia-Pacific Journal of Chemical Engineering, 8, (1), 54-58, (2013)
   

Zhang CJ et al., Kinetics of photocatalytic degradation of atrazine on molecularly imprinted titania film.
Asia-Pacific Journal of Chemical Engineering, 8, (3), 318-322, (2013)
   

Yang ZP et al., Photoelectrochemical bilirubin biosensor based on Fe3O4/hydroxyapatite/molecularly imprinted polypyrrole nanoparticles.
Sensors and Actuators B: Chemical, 201, 167-172, (2014)
   

Yang ZP et al., Modification of carbon aerogel electrode with molecularly imprinted polypyrrole for electrochemical determination of dopamine.
Sensors and Actuators B: Chemical, 212, 457-463, (2015)
   

Yang ZP et al., A high-performance nonenzymatic piezoelectric sensor based on molecularly imprinted transparent TiO2 film for detection of urea.
Biosensors and Bioelectronics, 74, 85-90, (2015)
   

Zhang CJ et al., A highly selective photoelectrochemical biosensor for uric acid based on core-shell Fe3O4@C nanoparticle and molecularly imprinted TiO2.
Biosensors and Bioelectronics, 65, 115-120, (2015)
   

Zhang CJ et al., Design of molecularly imprinted TiO2/carbon aerogel electrode for the photoelectrochemical determination of atrazine.
Sensors and Actuators B: Chemical, 211, 206-212, (2015)
   

Zhang CJ et al., Facile synthesis of Fe3O4/SiO2/molecularly imprinted hydroxyapatite nanocomposite and its enhanced photocatalytic degradation of target contaminant.
Separation and Purification Technology, 143, 88-93, (2015)
   

Zhang CJ et al., Facile synthesis of magnetically recoverable Fe3O4/Al2O3/molecularly imprinted TiO2 nanocomposites and its molecular recognitive photocatalytic degradation of target contaminant.
Journal of Molecular Catalysis A: Chemical, 402, 10-16, (2015)
   

Zhang CJ et al., A novel photoelectrochemical sensor for bilirubin based on porous transparent TiO2 and molecularly imprinted polypyrrole.
Electrochimica Acta, 187, 451-456, (2016)
   

Zhang CL et al., Modification of nanocrystalline TiO2 coatings with molecularly imprinted TiO2 for uric acid recognition.
Journal of Molecular Recognition, 32, (6), Article_e2775-(2019)
   

Zhang CL et al., Fabrication of Red Mud/Molecularly Imprinted Polypyrrole-Modified Electrode for the Piezoelectric Sensing of Bilirubin.
IEEE Sensors Journal, 19, (4), 1280-1284, (2019)
   

Yang ZQ

Li XP et al., Molecularly Imprinted Dispersive Solid-Phase Extraction for the Determination of Triazine Herbicides in Grape Seeds by High-Performance Liquid Chromatography.
Journal of Chromatographic Science, 54, (5), 871-877, (2016)
   

Yang ZR

Lv YK et al., Preparation of doxycycline-imprinted magnetic microspheres by inverse-emulsion suspension polymerization for magnetic dispersion extraction of tetracyclines from milk samples.
Journal of Separation Science, 36, (16), 2656-2663, (2013)
   

Yang ZS

Chen W et al., Preparation and Application of Electrode Modifided with Phoxim Molecular Imprinted Polymer.
Journal of Instrumental Analysis, 33, (3), 270-276, (2014)
   

Yang ZT

Wang JQ et al., Preparation of surface protein imprinted thermosensitive polymer monolithic column and its specific adsorption for BSA.
Talanta, 200, 526-536, (2019)
   

Yang ZT et al., Design and preparation of self-driven BSA surface imprinted tubular carbon nanofibers and their specific adsorption performance.
Chemical Engineering Journal, 373, 923-934, (2019)
   

Yang ZT et al., Self-Driven BSA Surface Imprinted Magnetic Tubular Carbon Nanofibers: Fabrication and Adsorption Performance.
ACS Sustainable Chemistry & Engineering, 8, (8), 3241-3252, (2020)
   

Yang ZT et al., Development of surface imprinted heterogeneous nitrogen-doped magnetic carbon nanotubes as promising materials for protein separation and purification.
Talanta, 224, Article121760-(2021)
   

Yang ZT et al., Cobalt-Iron Double Ion-Bovine Serum Albumin Chelation-Assisted Thermo-Sensitive Surface-Imprinted Nanocage with High Specificity.
ACS Applied Materials & Interfaces, 13, (29), 34829-34842, (2021)
   

Zhang YF et al., Fabrication of Surface-Imprinted Magnetic Wrinkled Microspheres and Their Specific Adsorption of BSA.
Industrial & Engineering Chemistry Research, 60, (30), 11277-11288, (2021)
   

Yang ZX

Li H et al., Preparation of homoharringtonine imprinted polymer by precipitation polymerization.
Chemical Industry and Engineering Progress, 28, (10), 1787-1791, (2009)
   

Chen X et al., Synthesis and Application of Novel Magnetic Lead (II) Ion Imprinted Polymers Based on Multiwalled Carbon Nanotubes.
Chinese Journal of Analytical Chemistry, 41, (9), 1406-1412, (2013)
   

Long F et al., Imprinted electrochemical sensor based on magnetic multi-walled carbon nanotube for sensitive determination of kanamycin.
Journal of Electroanalytical Chemistry, 755, 7-14, (2015)
   

Long F et al., Magnetic Graphene Modified Imprinted Electrochemical Sensor for Detection of 4-Octylphenol.
Chinese Journal of Analytical Chemistry, 44, (6), 908-914, (2016)
   

Fu JL et al., A dual-response ratiometric fluorescence imprinted sensor based on metal-organic frameworks for ultrasensitive visual detection of 4-nitrophenol in environments.
Biosensors and Bioelectronics, 198, Article113848-(2022)
   

Yang ZY

Han Q et al., Fe3O4@rGO doped molecularly imprinted polymer membrane based on magnetic field directed self-assembly for the determination of amaranth.
Talanta, 123, 101-108, (2014)
   

Wu JH et al., Vanillin-molecularly targeted extraction of stir bar based on magnetic field induced self-assembly of multifunctional Fe3O4@Polyaniline nanoparticles for detection of vanilla-flavor enhancers in infant milk powders.
Journal of Colloid and Interface Science, 442, 22-29, (2015)
   

Cai QZ et al., Selective capture and rapid identification of Panax notoginseng metabolites in rat faeces by the integration of magnetic molecularly imprinted polymers and high-performance liquid chromatography coupled with orbitrap mass spectrometry.
Journal of Chromatography A, 1455, 65-73, (2016)
   

Yang ZY et al., Selective separation and identification of metabolite groups of Polygonum cuspidatum extract in rat plasma using dispersion solid-phase extraction by magnetic molecularly imprinted polymers coupled with LC/Q-TOF-MS.
RSC Advances, 6, (15), 12193-12204, (2016)
   

Luo JP et al., Determination of active ingredients in Chinese medicine Danning Tablets using dispersion solid-phase extraction by molecular imprinting nanomaterials coupled with HPLC-DAD.
Analytical Methods, 9, (17), 2585-2589, (2017)
   

Wen YL et al., Bionic receptor for atherosclerosis therapy: Molecularly imprinted polymers mediate unique cholesterol efflux and inhibit inflammation.
Chemical Engineering Journal, 430, Article132870-(2022)
   

Yankelov R

Yankelov R et al., The selectivity of protein-imprinted gels and its relation to protein properties: A computer simulation study.
Journal of Molecular Recognition, 30, (7), ArticleNoe2607-(2017)
   

Yano K

Kugimiya A et al., Recognition of sialic-acid using molecularly imprinted polymer.
Analytical Letters, 28, (13), 2317-2323, (1995)
   

Piletsky SA et al., Atrazine sensing by molecularly imprinted membranes.
Biosensors and Bioelectronics, 10, (9-10), 959-964, (1995)
   

Tanabe K et al., Recognition of barbiturates in molecularly imprinted copolymers using multiple hydrogen-bonding.
Journal of the Chemical Society-Chemical Communications, (22), 2303-2304, (1995)
   

Kugimiya A et al., Recognition in novel molecularly imprinted polymer sialic acid receptors in aqueous media.
Analytical Letters, 29, (7), 1099-1107, (1996)
   

Piletsky SA et al., A biomimetic receptor system for sialic acid based on molecular imprinting.
Analytical Letters, 29, (2), 157-170, (1996)
   

Cheong SH et al., Development of steroid sensors using molecularly imprinted polymers.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 31-31, (1997)
   

Cheong SH et al., Testosterone receptor binding mimic constructed using molecular imprinting.
Macromolecules, 30, (5), 1317-1322, (1997)
   

Levi R et al., Optical detection of chloramphenicol using molecularly imprinted polymers.
Analytical Chemistry, 69, (11), 2017-2021, (1997)
   

McNiven S et al., Applications of molecularly imprinted polymers to molecules.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 113-113, (1997)
   

Piletsky SA et al., Optical detection system for triazine based on molecularly-imprinted polymers.
Analytical Letters, 30, (3), 445-455, (1997)
   

Yano K et al., Development of artificial host polymers which mimick biochemical interactions.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 114-114, (1997)
   

Yano K et al., Stereoselective recognition of dipeptide derivatives in molecularly imprinted polymers which incorporate an L-valine derivative as a novel functional monomer.
Analytica Chimica Acta, 357, (1-2), 91-98, (1997)
   

Cheong SH et al., Synthesis and binding properties of a noncovalent molecularly imprinted testosterone-specific polymer.
Journal of Polymer Science Part A: Polymer Chemistry, 36, (11), 1725-1732, (1998)
   

McNiven S et al., Chloramphenicol sensor based on an in situ imprinted polymer.
Analytica Chimica Acta, 365, (1-3), 69-74, (1998)
   

McNiven SJ et al., Book chapter, Application of molecular imprinting to the recognition and detection of bioactive materials, 
In: Molecular and Ionic Recognition with Imprinted Polymers, Bartsch RA, Maeda M (Eds.) The American Chemical Society: Washington DC, Ch. 6, 90-108, (1998)
   

Nomura Y et al., Selective recognition of 2, 4-dichlorophenoxyacetic acid using a molecularly imprinted polymer.
Analytical Letters, 31, (6), 973-980, (1998)
   

Rachkov A et al., Molecularly imprinted polymers selective for [beta]-estradiol.
Supramolecular Chemistry, 9, (4), 317-323, (1998)
   

Rachkov AE et al., Molecularly imprinted polymers as artificial steroid receptors.
Polymers for Advanced Technologies, 9, (8), 511-519, (1998)
   

Yano K et al., Molecularly imprinted polymers which mimic multiple hydrogen bonds between nucleotide bases.
Analytica Chimica Acta, 363, (2-3), 111-117, (1998)
   

Yano K et al., Molecularly imprinted polymers for biosensor applications.
TrAC Trends in Analytical Chemistry, 18, (3), 199-204, (1999)
   

Rachkov A et al., Fluorescence detection of b-estradiol using a molecularly imprinted polymer.
Analytica Chimica Acta, 405, (1-2), 23-29, (2000)
   

Yano Y

Katada N et al., Formation of selective adsorption cavity by chemical vapor deposition of molecular sieving silica overlayer on alumina using molecular template in the presence of acetic acid.
Bulletin of the Chemical Society of Japan, 78, (6), 1001-1007, (2005)
   

Yanti

Nurhayati T et al., Synthesis and Study of Guest-Rebinding of MIP Based on MAA Prepared using Theophylline Template.
Journal of Physics: Conference Series, 739, (1), ArticleNo012127-(2016)
   

Yanti et al., Synthesis and characterization of MAA-based molecularly-imprinted polymer (MIP) with D-glucose template.
Journal of Physics: Conference Series, 739, (1), ArticleNo012143-(2016)
   

Widayani et al., Preliminary Study of Molecularly Imprinted Polymer-based Potentiometric Sensor for Glucose.
Procedia Engineering, 170, 84-87, (2017)
   

Yao AX

Han S et al., A molecularly imprinted polymer based on MOF and deep eutectic solvent for selective recognition and adsorption of bovine hemoglobin.
Analytical and Bioanalytical Chemistry, 413, (21), 5409-5417, (2021)
   

Han S et al., Determination of chloropropanol with an imprinted electrochemical sensor based on multi-walled carbon nanotubes/metal-organic framework composites.
RSC Advances, 11, (30), 18468-18475, (2021)
   

Han S et al., An ionic liquid-molecularly imprinted composite based on graphene oxide for the specific recognition and extraction of cancer antigen 153.
RSC Advances, 11, (22), 13085-13090, (2021)
   

Yao B

Chai CY et al., Towards the development of a portable sensor based on a molecularly imprinted membrane for the rapid determination of salbutamol in pig urine.
Analytica Chimica Acta, 675, (2), 185-190, (2010)
   

Liu XF et al., Bionic Sensor for Detection of Diazepam in Meat Using Molecularly Imprinted Film.
Chinese Journal of Analytical Chemistry, 38, (5), 683-687, (2010)
   

Liu XF et al., Spectroscopic Study of Diazepam Molecularly Imprinted Polymers and Initiative Application to Conductimetric Sensor Based on Molecularly Imprinted Films.
Spectroscopy and Spectral Analysis, 30, (8), 2228-2231, (2010)
   

Liu XF et al., Electrochemical Sensor for Diazepam Based on Molecularly Imprinted Film Modified Screen Printed Electrode.
Journal of Instrumental Analysis, 29, (11), 1121-1125, 1131, (2010)
   

Yao BJ

Hu YY et al., Improved selective extraction of 3, 3'-dichlorobenzidine by molecularly imprinted polysiloxane microspheres.
Environmental Chemistry Letters, 10, (3), 275-280, (2012)
   

Yao C

Kong Y et al., Identification of Aspartic Acid Enantiomers Based on Molecularly Imprinted Polyaniline.
Chinese Journal of Chemistry, 29, (12), 2659-2663, (2011)
   

Kong Y et al., Enantioselective recognition of glutamic acid enantiomers based on poly(aniline-co-m-aminophenol) electrode column.
Electrochemistry Communications, 14, (1), 17-20, (2012)
   

Yao CX

Shi XZ et al., Group-selective molecularly imprinted polymer solid-phase extraction for the simultaneous determination of six sulfonamides in aquaculture products.
Journal of Chromatography B, 879, (15-16), 1071-1076, (2011)
   

Liang Y et al., A novel molecularly imprinted polymer composite based on polyaniline nanoparticles as sensitive sensors for parathion detection in the field.
Food Control, 133, Article108638-(2022)
   

Yao CY

Liang Z et al., Study on Preparation of Molecularly Imprinted Polymer Microspheres by Precipitation Polymerization with 1-Phenyl-1-propanol as Template.
Journal of Xiamen University (Natural Science), 46, (2), 204-208, (2007)
   

Liang Z et al., Development of Molecularly Imprinted Monolithic Column for Capillary Electrochromatography.
Journal of Instrumental Analysis, 26, (5), 757-762, (2007)
   

Yao CY et al., Proceeding, Preparation of MIP Microspheres by Precipitation Polymerization with 1-Phenyl-1-Propanol as Template, 
Bu JL, Jiang ZY, Jiao SH (Eds.), 1225-1230, (2011)
   

Yao D

Chu HT et al., Preparation and application of methimazole molecularly imprinted polymer based on silver-loaded dendritic fiber-type silica.
RSC Advances, 11, (22), 13446-13457, (2021)
   

Yao DD

Gu XL et al., Efficient discovery and capture of new neuronal nitric oxide synthase-postsynaptic density protein-95 uncouplers from herbal medicines using magnetic molecularly imprinted polymers as artificial antibodies.
Journal of Separation Science, 40, (17), 3522-3534, (2017)
   

Sun CH et al., The Multi-Template Molecularly Imprinted Polymer Based on SBA-15 for Selective Separation and Determination of Panax notoginseng Saponins Simultaneously in Biological Samples.
Polymers, 9, (12), ArticleNo653-(2017)
   

Huang JJ et al., Novel surface imprinted magnetic mesoporous silica as artificial antibodies for efficient discovery and capture of candidate nNOS-PSD-95 uncouplers for stroke treatment.
Journal of Materials Chemistry B, 6, (10), 1531-1542, (2018)
   

Yao DD et al., A surface magnetic imprinted polymers as artificial receptors for selective and efficient capturing of new neuronal nitric oxide synthase-post synaptic density protein-95 uncouplers.
Journal of Pharmaceutical and Biomedical Analysis, 154, 180-190, (2018)
   

Sun CH et al., A biomimetic fluorescent nanosensor based on imprinted polymers modified with carbon dots for sensitive detection of alpha-fetoprotein in clinical samples.
Analyst, 144, (22), 6760-6772, (2019)
   

Yao FJ

Ao JX et al., A novel ion-imprinted amidoxime-functionalized UHMWPE fiber based on radiation-induced crosslinking for selective adsorption of uranium.
RSC Advances, 9, (49), 28588-28597, (2019)
   

Yao GH

Yao GH et al., Surface Plasmon Resonance Sensor Based on Magnetic Molecularly Imprinted Polymers Amplification for Pesticide Recognition.
Analytical Chemistry, 85, (24), 11944-11951, (2013)
   

Yao GX

Liu XL et al., Microwave-assisted synthesis of selective degradation photocatalyst by surface molecular imprinting method for the degradation of tetracycline onto ClTiO2.
Chemical Engineering Journal, 217, 398-406, (2013)
   

Liu XL et al., Surface Molecular Imprinting Modified TiO2 Photocatalyst for Adsorption and Photocatalytic Degradation of Salicylic Acid.
Fresenius Environmental Bulletin, 23, (7A), 1626-1634, (2014)
   

Liu XL et al., Selective degradation of ciprofloxacin with modified NaCl/TiO2 photocatalyst by surface molecular imprinted technology.
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 441, 420-426, (2014)
   

Yao H

Pan JM et al., Selective Recognition of 2, 4, 6-Trichlorophenol by Molecularly Imprinted Polymers Based on Magnetic Halloysite Nanotubes Composites.
Journal of Physical Chemistry C, 115, (13), 5440-5449, (2011)
   

Pan JM et al., Selective adsorption of 2, 6-dichlorophenol by surface imprinted polymers using polyaniline/silica gel composites as functional support: Equilibrium, kinetics, thermodynamics modeling.
Chemical Engineering Journal, 172, (2-3), 847-855, (2011)
   

Fan HT et al., Ionic Imprinted Silica-Supported Hybrid Sorbent with an Anchored Chelating Schiff Base for Selective Removal of Cadmium(II) Ions from Aqueous Media.
Industrial & Engineering Chemistry Research, 53, (1), 369-378, (2014)
   

Wang JX et al., Optical Detection of [lambda]-Cyhalothrin by Core-Shell Fluorescent Molecularly Imprinted Polymers in Chinese Spirits.
Journal of Agricultural and Food Chemistry, 63, (9), 2392-2399, (2015)
   

Han S et al., A kanamycin sensor based on an electrosynthesized molecularly imprinted poly-o-phenylenediamine film on a single-walled carbon nanohorn modified glassy carbon electrode.
Analyst, 142, (1), 218-223, (2017)
   

Zhu HJ et al., Magnetic nanoparticles combining teamed boronate affinity and surface imprinting for efficient selective recognition of glycoproteins under physiological pH.
Chemical Engineering Journal, 346, 317-328, (2018)
   

Yao HF

Wang XL et al., pH/temperature-sensitive hydrogel-based molecularly imprinted polymers (hydroMIPs) for drug delivery by frontal polymerization.
RSC Advances, 6, (96), 94038-94047, (2016)
   

Liu XL et al., Green Synthesis of Carbon Nanotubes-Reinforced Molecularly Imprinted Polymer Composites for Drug Delivery of Fenbufen.
AAPS PharmSciTech, 19, (8), 3895-3906, (2018)
   

Yao J

Yao J et al., Preparation of metal ion imprinting adsorbent resin by inverse microemulsion polymerization and its performance.
Petrochemical Technology, 37, (4), 397-401, (2008)
   

Hu YY et al., Selective Detection of 20 Triazoles Residues in Food Uusing Molecularly Imprinted Solid Phase Extraction coupled with Liquid Chromatography Tandem Mass Spectrometry.
Chinese Journal of Analytical Chemistry, 42, (2), 227-232, (2014)
   

He H et al., Detection of trace microcystin-LR on a 20 MHz QCM sensor coated with in situ self-assembled MIPs.
Talanta, 131, 8-13, (2015)
   

Liu J et al., Preparation and characterization of erythromycin molecularly imprinted polymers based on distillation-precipitation polymerization.
Journal of Separation Science, 38, (17), 3103-3109, (2015)
   

Li YC et al., Supportless electrochemical sensor based on molecularly imprinted polymer modified nanoporous microrod for determination of dopamine at trace level.
Biosensors and Bioelectronics, 78, 308-314, (2016)
   

Fan WG et al., Functional organic material for roxarsone and its derivatives recognition via molecular imprinting.
Journal of Molecular Recognition, 31, (3), ArticleNoe2625-(2018)
   

Zhi KK et al., Preparation and evaluation of molecularly imprinted polymer for selective recognition and adsorption of gossypol.
Journal of Molecular Recognition, 31, (3), ArticleNoe2627-(2018)
   

Yao J et al., Experimental and theoretical studies of a novel electrochemical sensor based on molecularly imprinted polymer and B, N, F-CQDs/AgNPs for enhanced specific identification and dual signal amplification in highly selective and ultra-trace bisphenol S determination in plastic products.
Analytica Chimica Acta, 1066, 36-48, (2019)
   

Yao JH

Qi JY et al., Removal of Trace Aniline from Water by Using Molecularly Imprinted Polymers.
China Water & Wastewater, 24, (1), 69-72, (2008)
   

Yao JH et al., Computational design and synthesis of molecular imprinted polymers with high selectivity for removal of aniline from contaminated water.
Analytica Chimica Acta, 610, (2), 282-288, (2008)
   

Yao JL

Lu F et al., Evaluation of the binding specificity of electrosynthesized poly-ortho-phenylenediamine molecularly imprinted with metal chelates.
Microchimica Acta, 174, (1), 47-54, (2011)
   

Wang LY et al., Electrosynthesis and Characterization of Metal Chelate Imprinted Poly-o-Phenylenediamine Films.
Acta Physico-Chimica Sinica, 27, (6), 1451-1456, (2011)
   

Yao JM

Yao JM et al., Specific recognition of cationic paraquat in environmental water and vegetable samples by molecularly imprinted stir-bar sorptive extraction based on monohydroxylcucurbit[7]uril-paraquat inclusion complex.
Microchimica Acta, 187, (10), Article578-(2020)
   

Yao JS

Wang XD et al., Enantioselection and development in chiral stationary phase based on amino acid.
Chinese Journal of Organic Chemistry, 26, (7), 912-921, (2006)
   

Yao JT

Liu SC et al., Graphene oxide based molecularly imprinted polymers with double recognition abilities: The combination of covalent boronic acid and traditional non-covalent monomers.
Chemical Engineering Journal, 290, 220-231, (2016)
   

Liu Y et al., Selective separation of phenol from salicylic acid effluent over molecularly imprinted polystyrene nanospheres composite alumina membranes.
Chemical Engineering Journal, 286, 622-631, (2016)
   

Wang P et al., Double affinity integrated MIPs nanoparticles for specific separation of glycoproteins: A combination of synergistic multiple bindings and imprinting effect.
Chemical Engineering Journal, 358, 143-152, (2019)
   

Yao JT et al., Janus-like boronate affinity magnetic molecularly imprinted nanobottles for specific adsorption and fast separation of luteolin.
Chemical Engineering Journal, 356, 436-444, (2019)
   

Yao JX

Gao T et al., Progress of Protein Molecular imprinting in Carrier Materials Form.
Chinese Polymer Bulletin, (4), 36-43, (2010)
   

Guo MJ et al., Molecularly imprinted polymers with assistant recognition polymer chains for bovine serum albumin.
SCIENCE CHINA Chemistry, 53, (4), 905-911, (2010)
   

Zhang Y et al., Protein Imprinted with Cyclodextrin Pseudo polyrotaxanes as Pseudo-supports.
Chinese Journal of Analytical Chemistry, 42, (2), 186-191, (2014)
   

Yao JY

Liu ZP et al., Molecularly imprinted polymer decorated 3D-framework of functionalized multi-walled carbon nanotubes for ultrasensitive electrochemical sensing of Norfloxacin in pharmaceutical formulations and rat plasma.
Sensors and Actuators B: Chemical, 288, 363-372, (2019)
   

Yao KJ

Wang HY et al., Progress in fluorescent molecular imprinting polymer sensors.
Chemistry Bulletin, 73, (5), 396-403, (2010)
   

Mu HY et al., Progress in template-ion imprinted polymer.
Chemical Industry and Engineering Progress, 30, (11), 2467-2480, (2011)
   

Mu HY et al., Preparation of an Ion Imprinted Fluorescent Sensor for Selectivity Determination of Cadmium in Aqueous Media.
Journal of Instrumental Analysis, 30, (7), 795-798, (2011)
   

Fu K et al., Selective Determination of Methylmercury Ion in Aqueous Media with Molecularly Imprinted Polymer Fluorescent Sensor.
Journal of Instrumental Analysis, 31, (8), 1001-1004, (2012)
   

Guo XW et al., Preparation and Properties of Temperature-responsive Molecularly Imprinted Polymer Hydrogels to Salicylic Acid.
Journal of Instrumental Analysis, 31, (10), 1303-1308, (2012)
   

Xu XH et al., Molecular imprinting in chemical sensors and sensor arrays.
Chemical Industry and Engineering Progress, 32, (12), 2901-2909, (2013)
   

Yang ZC et al., Temperature-sensitive molecularly imprinted hydrogels.
Chemical Industry and Engineering Progress, 33, (1), 117-123, (2014)
   

Gao YL et al., Surface molecularly imprinted polymers for solid-phase extraction of (-)-epigallocatechin gallate from toothpaste.
Frontiers of Chemical Science and Engineering, 9, (4), 467-478, (2015)
   

Yao KS

Cheng TC et al., Molecular Recognition of Sulfaquinoxaline and Sulfapyridine with Molecularly Imprinted Polymer.
Journal of the Chilean Chemical Society, 54, (3), 295-298, (2009)
   

Yao L

Cui Y et al., Bio-imprinting of protein-nucleic acid mixture and its catalytic behavior in hydrolysis.
Journal of Tianjin University of Technology, 24, (3), 74-76, (2008)
   

Yang X et al., Application of molecular imprinting technology in separation and purification of active ingredients from natural products.
Journal of Northeast Agricultural University, 42, (8), 146-153, (2011)
   

Men JY et al., Preparation of 5-Fluorouracil-Surface Imprinted Microspheres MIP-PSSS/CPVA and Studies on its Character of Colon-Specific Drug Delivery.
Acta Chimica Sinica, 70, (21), 2273-2280, (2012)
   

Yao L et al., Development, validation, and application of a liquid chromatography-tandem mass spectrometry method for the determination of 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol in human hair.
Analytical and Bioanalytical Chemistry, 404, (8), 2259-2266, (2012)
   

Liu BZ et al., Development of a Sensitive Method for the Determination of 4-(Methylnitrosamino)-1-(3-pyridyl)-1-butanol in Human Urine Using Solid-phase Extraction Combined with Ultrasound-assisted Dispersive Liquid-liquid Microextraction and LC-MS/MS Detection.
Journal of the Chinese Chemical Society, 60, (8), 1055-1061, (2013)
   

Men JY et al., Preparation and Characterization of Metronidazole-Surface Imprinted Microspheres MIP-PSSS/CPVA for Colon-Specific Drug Delivery System.
Journal of Macromolecular Science, Part A, 51, (11), 914-923, (2014)
   

Xie TJ et al., A facile molecularly imprinted electrochemical sensor based on graphene: application to the selective determination of thiamethoxam in grain.
RSC Advances, 7, (62), 38884-38894, (2017)
   

Wang YY et al., CuCo2O4/N-Doped CNTs loaded with molecularly imprinted polymer for electrochemical sensor: Preparation, characterization and detection of metronidazole.
Biosensors and Bioelectronics, 142, Article111483-(2019)
   

Zhao QY et al., Dual functional monomer surface molecularly imprinted microspheres for polysaccharide recognition in aqueous solution.
Analytical Methods, 11, (21), 2800-2808, (2019)
   

Yao LD

Yao LD et al., Nicotinic acid voltammetric sensor based on molecularly imprinted polymer membrane-modified electrode.
Analytical Letters, 40, (4), 677-688, (2007)
   

Yao LD et al., An Electrochemical Sensor for Phenylephrine Based on Molecular Imprinting.
Analytical Sciences, 25, (9), 1089-1093, (2009)
   

Yao LF

Gao Y et al., Synthesis of rice husk-based ion-imprinted polymer for selective capturing Cu(II) from aqueous solution and re-use of its waste material in Glaser coupling reaction.
Journal of Hazardous Materials, 424, Article127203-(2022)
   

Yao LL

Mao LB et al., A synergistic approach to enhance the photoelectrochemical performance of carbon dots for molecular imprinting sensors.
Nanoscale, 11, (16), 7885-7892, (2019)
   

Mao LB et al., Molecularly imprinted photoelectrochemical sensor for fumonisin B1 based on GO-CdS heterojunction.
Biosensors and Bioelectronics, 127, 57-63, (2019)
   

Mao LB et al., Organic-inorganic nanoparticles molecularly imprinted photoelectrochemical sensor for [alpha]-solanine based on p-type polymer dots and n-CdS heterojunction.
Analytica Chimica Acta, 1059, 94-102, (2019)
   

Yao LX

Yao LX et al., Design and Synthesis of Cross-Linked Micellar Particles to Assist Microalgae Lipid Recovery from Aqueous Extract.
Journal of the American Oil Chemists' Society, 93, (1), 51-60, (2016)
   

Yao M

Shao MY et al., Carbon Quantum Dots Encapsulated Molecularly Imprinted Fluorescence Quenching Particles for Sensitive Detection of Zearalenone in Corn Sample.
Toxins, 10, (11), ArticleNo438-(2018)
   

Yao QH

Zhou WH et al., A quartz crystal microbalance sensor based on mussel-inspired molecularly imprinted polymer.
Biosensors and Bioelectronics, 26, (2), 585-589, (2010)
   

Ran H et al., Self-assembly PS@dual-emission ratiometric fluorescence probe coupled with core-shell structured MIP for the detection of malachite green in fish.
Journal of Photochemistry and Photobiology A-Chemistry, 372, 260-269, (2019)
   

Ran H et al., Ratiometric fluorescence probe of MIPs@CdTe QDs for trace malachite green detection in fish.
Analytical and Bioanalytical Chemistry, 411, (2), 537-544, (2019)
   

Yao QQ

Sun Q et al., Determination of Parathion-methyl in Vegetables by Fluorescent-Labeled Molecular Imprinted Polymer.
Chinese Journal of Chemistry, 29, (10), 2134-2140, (2011)
   

Fan HX et al., Development of new solid phase extraction techniques in the last ten years.
Journal of Chinese Pharmaceutical Sciences, 22, (4), 293-302, (2013)
   

Yao QZ

Yao QZ et al., Synthesis of TiO2 Hybrid Molecular Imprinted Polymer for Ethofumesate Linked by Silane Coupling Agent.
Journal of Inorganic and Organometallic Polymers and Materials, 18, (4), 477-484, (2008)
   

Yao QZ et al., Surface Functional Imprinting of Bensulfuron-methyl at Surface of Silica Nanoparticles Linked by Silane Coupling Agent.
Journal of Inorganic and Organometallic Polymers and Materials, 19, (2), 215-222, (2009)
   

Yao QZ et al., Synthesis of TiO2 Hybrid Molecular Imprinted Nanospheres Linked by Silane Coupling Agent.
Journal of Inorganic and Organometallic Polymers and Materials, 19, (4), 466-472, (2009)
   

Yao R

Yao R et al., Preparation and evaluation of molecularly imprinted membrane of teicoplanin.
Analytical Methods, 10, (45), 5416-5422, (2018)
   

Yu HN et al., Development of a novel assay of molecularly imprinted membrane by design-based gaussian pattern for vancomycin determination.
Journal of Pharmaceutical and Biomedical Analysis, 175, Article112789-(2019)
   

Yao RH

Liu J et al., Spectroscopy Study of Methyl Parathion Molecularly Imprinted Polymers.
Spectroscopy and Spectral Analysis, 29, (10), 2756-2759, (2009)
   

Yao RQ

Li SX et al., Potentiometric Detection of Trace-Level Chlorpyrifos in Seawater Using a Polymeric Membrane Electrode Coupled with on-line Molecularly Imprinted Solid-Phase Extraction.
International Journal of Electrochemical Science, 10, 1393-1403, (2015)
   

Wang TT et al., An all-solid-state imprinted polymer-based potentiometric sensor for determination of bisphenol S.
RSC Advances, 6, (77), 73308-73312, (2016)
   

Liang RN et al., Soluble Molecularly Imprinted Nanorods for Homogeneous Molecular Recognition.
Frontiers in Chemistry, 6, ArticleNo81-(2018)
   

Zhang H et al., Soluble Molecularly Imprinted Polymer-Based Potentiometric Sensor for Determination of Bisphenol AF.
Analytical Chemistry, 90, (1), 657-662, (2018)
   

Yao S

Wang HW et al., Fabrication of a Simple and Sensitive Electrochemical Dicyandiamide Sensor Based on Molecularly Imprinted Technology.
International Journal of Electrochemical Science, 10, 8834-8843, (2015)
   

Wang HW et al., Selective extraction and determination of fluoroquinolones in bovine milk samples with montmorillonite magnetic molecularly imprinted polymers and capillary electrophoresis.
Analytical and Bioanalytical Chemistry, 408, (2), 589-598, (2016)
   

Wang HW et al., Molecularly imprinted electrochemical sensor based on Au nanoparticles in carboxylated multi-walled carbon nanotubes for sensitive determination of olaquindox in food and feedstuffs.
Biosensors and Bioelectronics, 87, 417-421, (2017)
   

Wang HW et al., Selective recognization of dicyandiamide in bovine milk by mesoporous silica SBA-15 supported dicyandiamide imprinted polymer based on surface molecularly imprinting technique.
Food Chemistry, 240, 1262-1267, (2018)
   

Chen SY et al., Highly selective recognition of L-phenylalanine with molecularly imprinted polymers based on imidazolyl amino acid chiral ionic liquid.
Chirality, 31, (10), 824-834, (2019)
   

Huang XJ et al., Development of molecularly imprinted electrochemical sensor with reduced graphene oxide and titanium dioxide enhanced performance for the detection of toltrazuril in chicken muscle and egg.
Journal of Pharmaceutical and Biomedical Analysis, 164, 607-614, (2019)
   

Guo XX et al., Multi-functional magnetic molecular imprinting probe for visual detection of IgY antibodies.
Microchimica Acta, 188, (11), Article378-(2021)
   

Yao SP

Kong Y et al., Molecularly imprinted polypyrrole prepared by electrodeposition for the selective recognition of tryptophan enantiomers.
Journal of Applied Polymer Science, 115, (4), 1952-1957, (2010)
   

Yao SZ

Liang CD et al., Study of a molecular imprinting polymer coated BAW bio-mimic sensor and its application to the determination of caffeine in human serum and urine.
Analyst, 124, 1781-1785, (1999)
   

Liang CD et al., Molecular imprinting polymer coated BAW bio-mimic sensor for direct determination of epinephrine.
Analytica Chimica Acta, 415, (1-2), 135-141, (2000)
   

Liang CD et al., Bulk acoustic wave sensor for herbicide assay based on molecularly imprinted polymer.
Fresenius Journal of Analytical Chemistry, 367, (6), 551-555, (2000)
   

Peng H et al., Non-aqueous assay system for phenobarbital using biomimetic bulk acoustic wave sensor based on a molecularly imprinted polymer.
Analytical Letters, 33, (5), 793-808, (2000)
   

Peng H et al., Bulk acoustic wave sensor using molecularly imprinted polymers as recognition elements for the determination of pyrimethamine.
Talanta, 52, (3), 441-448, (2000)
   

Peng H et al., Development of a new atropine sulfate bulk acoustic wave sensor based on a molecularly imprinted electrosynthesized copolymer of aniline with o-phenylenediamine.
Analytica Chimica Acta, 423, (2), 221-228, (2000)
   

Yao SZ et al., Biomimetic bulk acoustic wave sensor for determination of trimethoprim in the organic phase based on a molecular imprinting polymer.
Analytical Sciences, 16, (2), 211-215, (2000)
   

Peng H et al., Development of a thickness shear mode acoustic sensor based on an electrosynthesized molecularly imprinted polymer using an underivatized amino acid as the template.
Analyst, 126, (2), 189-194, (2001)
   

Tan YG et al., A new assay system for phenacetin using biomimic bulk acoustic wave sensor with a molecularly imprinted polymer coating.
Sensors and Actuators B: Chemical, 73, (2-3), 179-184, (2001)
   

Tan YG et al., A study of a new TSM bio-mimetic sensor using a molecularly imprinted polymer coating and its application for the determination of nicotine in human serum and urine.
Bioelectrochemistry, 53, (2), 141-148, (2001)
   

Tan YG et al., A piezoelectric biomimetic sensor for aminopyrine with a molecularly imprinted polymer coating.
Analyst, 126, (5), 664-668, (2001)
   

Tan YG et al., A study of a bio-mimetic recognition material for the BAW sensor by molecular imprinting and its application for the determination of paracetamol in the human serum and urine.
Talanta, 55, (2), 337-347, (2001)
   

Liu YH et al., Enantioseparation of DL-phenylalanine, based on a continuous molecularly imprinted polymer rod, using a series quartz crystal sensor as the detector.
Instrumentation Science & Technology, 30, (4), 455-464, (2002)
   

Peng H et al., Characterization of electrosynthesized poly(o-aminophenol) as a molecular imprinting material for sensor preparation by means of quartz crystal impedance analysis.
Analytical Letters, 35, (3), 435-450, (2002)
   

Zhang ZH et al., Microspheres sensor based on molecularly imprinted polymer synthesized by precipitation polymerization.
Chinese Journal of Chemistry, 21, (5), 550-555, (2003)
   

Li H et al., Adsorption isotherms and sites distribution of caffeic acid - imprinted polymer monolith from frontal analysis.
Chromatographia, 60, (7-8), 425-431, (2004)
   

Liao HP et al., Electrosynthesis of imprinted polyacrylamide membranes for the stereospecific L-histidine sensor and its characterization by AC impedance spectroscopy and piezoelectric quartz crystal technique.
Journal of Biochemical and Biophysical Methods, 59, (1), 75-87, (2004)
   

Liao HP et al., Preparation of the molecularly imprinted polymers-based capacitive sensor specific for tegafur and its characterization by electrochemical impedance and piezoelectric quartz crystal microbalance.
Electrochimica Acta, 49, (24), 4101-4107, (2004)
   

Zhang ZH et al., Effect of the size of molecularly imprinted polymers sensing materials on piezoelectric quartz crystal sensor performance.
Analytical Sciences, 20, (2), 291-295, (2004)
   

Zhang ZH et al., Study of molecularly imprinted post-microspheres as dipyridamole sensors.
Instrumentation Science & Technology, 32, (5), 507-518, (2004)
   

Li H et al., Separation and purification of chlorogenic acid by molecularly imprinted polymer monolithic stationary phase.
Journal of Chromatography A, 1098, (1-2), 66-74, (2005)
   

Ma JY et al., Synthesis of diethylstilbestrol-based molecularly imprinted polymers and its application in residues analysis.
Chinese Journal of Analytical Chemistry, 33, (10), 1413-1416, (2005)
   

Zhang ZH et al., Effect of the extraction method on the MIP-sensor.
Analytical Letters, 38, (2), 203-217, (2005)
   

Zhang ZH et al., Influence of cross-linkers' amount on the performance of the piezoelectric sensor modified with molecularly imprinted polymers.
Sensors and Actuators B: Chemical, 105, (2), 176-182, (2005)
   

Zhang ZH et al., Stereoselective histidine sensor based on molecularly imprinted sol-gel films.
Analytical Biochemistry, 336, (1), 108-116, (2005)
   

Ding L et al., Molecularly Imprinted Solid Phase Extraction of Epicatechin from Tea Beverage.
Analytical Letters, 39, (12), 2373-2385, (2006)
   

Zhang ZH et al., Molecularly imprinted thin film self-assembled on piezoelectric quartz crystal surface by the sol-gel process for protein recognition.
Biosensors and Bioelectronics, 21, (7), 1244-1251, (2006)
   

Zhang ZH et al., Electrodeposited sol-gel-imprinted sensing film for cytidine recognition on Au-electrode surface.
Talanta, 69, (2), 435-442, (2006)
   

Zhang ZH et al., Preparation and characterization of stereoselective L-histidine imprinted microspheres.
Chemical Journal of Chinese Universities, 29, (10), 1941-1946, (2008)
   

Hu YF et al., Research on Self-assembly MWNTs-clindamycin Molecularly Imprinted Sol-gel Electrochemical Sensor.
Chemical Journal of Chinese Universities, 30, (9), 1703-1708, (2009)
   

Tang F et al., Sample preparation for analyzing traditional Chinese medicines.
TrAC Trends in Analytical Chemistry, 28, (11), 1253-1262, (2009)
   

Zhang HB et al., Preparation and Application of Chlorogenic Acid Imprinted Solid Phase Extraction Materials Based on Multiwalled Carbon Nanotubes.
Chinese Journal of Analytical Chemistry, 37, (7), 955-959, (2009)
   

Zhang ZH et al., Preparation and Evaluation of Caffeine Molecularly Imprinted Composite Membrane.
Acta Chimica Sinica, 67, (18), 2121-2126, (2009)
   

Zhang ZH et al., Synthesis, characterization and evaluation of uniformly sized core-shell imprinted microspheres for the separation trans-resveratrol from giant knotweed.
Applied Surface Science, 255, (23), 9327-9332, (2009)
   

Zhang ZH et al., Electrochemical layer-by-layer modified imprinted sensor based on multi-walled carbon nanotubes and sol-gel materials for sensitive determination of thymidine.
Journal of Electroanalytical Chemistry, 644, (1), 7-12, (2010)
   

Zhang ZH et al., Microwave-assisted Heating Preparation of Core-shell Ion-imprinted Polymer and Extraction of Cr(III) from Urine.
Chemical Journal of Chinese Universities, 31, (9), 1734-1740, (2010)
   

Zhang ZH et al., Synthesis and application of core-shell complex-imprinted polymer for the solid-phase extraction of melamine from dairy products.
Journal of Separation Science, 33, (17-18), 2854-2861, (2010)
   

Zhang ZH et al., Novel Layer-by-layer Assembly Multi-walled Carbon Nanotube/Resveratrol Imprinted Sol-gel Electrochemical Sensor.
Acta Chimica Sinica, 68, (5), 431-436, (2010)
   

Zhang ZH et al., Novel layer-by-layer assembly molecularly imprinted sol-gel sensor for selective recognition of clindamycin based on Au electrode decorated by multi-wall carbon nanotube.
Journal of Colloid and Interface Science, 344, (1), 158-164, (2010)
   

Zhang ZH et al., Layer-by-layer assembly sensitive electrochemical sensor for selectively probing l-histidine based on molecular imprinting sol-gel at functionalized indium tin oxide electrode.
Biosensors and Bioelectronics, 26, (2), 696-702, (2010)
   

Zhang ZH et al., Novel surface molecularly imprinted material modified multi-walled carbon nanotubes as solid-phase extraction sorbent for selective extraction gallium ion from fly ash.
Talanta, 82, (1), 304-311, (2010)
   

Zhang ZH et al., Synthesis and application of multi-walled carbon nanotubes-molecularly imprinted sol-gel composite material for on-line solid-phase extraction and high-performance liquid chromatography determination of trace Sudan IV.
Analytica Chimica Acta, 661, (2), 173-180, (2010)
   

Zhang ZH et al., Preparation and Evaluation of Uniform-Sized Sol-Gel Theophylline Imprinted Microspheres as Solid Phase Extraction Sorbent.
Analytical Letters, 43, (15), 2318-2330, (2010)
   

Hu YF et al., Imprinted sol-gel electrochemical sensor for the determination of benzylpenicillin based on Fe3O4@SiO2/multi-walled carbon nanotubes-chitosans nanocomposite film modified carbon electrode.
Analytica Chimica Acta, 698, (1-2), 61-68, (2011)
   

Hu YF et al., Electrochemical determination of l-phenylalanine at polyaniline modified carbon electrode based on [beta]-cyclodextrin incorporated carbon nanotube composite material and imprinted sol-gel film.
Talanta, 84, (2), 305-313, (2011)
   

Zhang HB et al., Synthesis of a Novel Composite Imprinted Material Based on Multiwalled Carbon Nanotubes as a Selective Melamine Absorbent.
Journal of Agricultural and Food Chemistry, 59, (4), 1063-1071, (2011)
   

Zhang ML et al., Preparation of core-shell magnetic ion-imprinted polymer for selective extraction of Pb(II) from environmental samples.
Chemical Engineering Journal, 178, (1), 443-450, (2011)
   

Zhang ZH et al., Novel molecularly imprinted polymers based on multi-walled carbon nanotubes with binary functional monomer for the solid-phase extraction of erythromycin from chicken muscle.
Journal of Chromatography B, 879, (19), 1617-1624, (2011)
   

Zhang ZH et al., Novel magnetic bovine serum albumin imprinted polymers with a matrix of carbon nanotubes, and their application to protein separation.
Analytical and Bioanalytical Chemistry, 401, (9), 2855-2863, (2011)
   

Zhang ZH et al., A Polypyrrole-Imprinted Electrochemical Sensor Based on Nano-SnO2/Multiwalled Carbon Nanotubes Film Modified Carbon Electrode for the Determination of Oleanolic Acid.
Electroanalysis, 23, (10), 2446-2455, (2011)
   

Chen HJ et al., Surface-Imprinting Sensor Based on Carbon Nanotubes/Graphene Composite for Determination of Bovine Serum Albumin.
Electroanalysis, 24, (11), 2109-2116, (2012)
   

Chen HJ et al., Surface-imprinted chitosan-coated magnetic nanoparticles modified multi-walled carbon nanotubes biosensor for detection of bovine serum albumin.
Sensors and Actuators B: Chemical, 163, (1), 76-83, (2012)
   

Chen X et al., Molecularly imprinted polymers based on multi-walled carbon nanotubes for selective solid-phase extraction of oleanolic acid from the roots of kiwi fruit samples.
Talanta, 99, 959-965, (2012)
   

Chen X et al., Novel molecularly imprinted polymers based on multiwalled carbon nanotubes with bifunctional monomers for solid-phase extraction of rhein from the root of kiwi fruit.
Journal of Separation Science, 35, (18), 2414-2421, (2012)
   

Hu YF et al., Electrochemical Sensor for Sensitive Determination of Ga(III) Ion Based on [beta]-Cyclodextrin Incorporated Multi-walled Carbon Nanotubes and Imprinted Sol-gel Composite Film.
Chinese Journal of Chemistry, 30, (2), 377-385, (2012)
   

Hu YF et al., A sensitive and selective sensor-coated molecularly imprinted sol-gel film incorporating [beta]-cyclodextrin-multi-walled carbon nanotubes and cobalt nanoparticles-chitosan for oxacillin determination.
Surface And Interface Analysis, 44, (3), 334-341, (2012)
   

Hu YF et al., Electrochemical imprinted sensor for determination of oleanic acid based on poly (sodium 4-styrenesulfonate-co-acrylic acid)-grafted multi-walled carbon nanotubes-chitosan and cobalt hexacyanoferrate nanoparticles.
Biosensors and Bioelectronics, 31, (1), 190-196, (2012)
   

Hu YF et al., Selective and sensitive molecularly imprinted sol-gel film-based electrochemical sensor combining mercaptoacetic acid-modified PbS nanoparticles with Fe₃O₄@Au-multi-walled carbon nanotubes-chitosan.
Journal of Solid State Electrochemistry, 16, (3), 857-867, (2012)
   

Hu YF et al., Sensitive and selective imprinted electrochemical sensor for p-nitrophenol based on ZnO nanoparticles/carbon nanotubes doped chitosan film.
Thin Solid Films, 520, (16), 5314-5321, (2012)
   

Zhang ZH et al., Preparation of l-phenylalanine imprinted polymer based on monodisperse hybrid silica microsphere and its application on chiral separation of phenylalanine racemates as HPLC stationary phase.
Separation and Purification Technology, 87, (1), 142-148, (2012)
   

Chen H et al., Molecularly imprinted electrochemical sensor based on a reduced graphene modified carbon electrode for tetrabromobisphenol A detection.
Analyst, 138, (9), 2769-2776, (2013)
   

Chen HJ et al., Molecularly imprinted electrochemical sensor based on amine group modified graphene covalently linked electrode for 4-nonylphenol detection.
Talanta, 115, 222-227, (2013)
   

Yang X et al., Novel molecularly imprinted polymers with carbon nanotube as matrix for selective solid-phase extraction of emodin from kiwi fruit root.
Food Chemistry, 145, 687-693, (2014)
   

Yao T

Yao T et al., Recent Advances in Application of Surface Plasmon Resonance Sensors Based on Molecular Imprinted Polymers in Food Safety Detection.
Journal of Instrumental Analysis, 34, (2), 237-244, (2015)
   

Li TF et al., Electrochemical detection of ractopamine based on a molecularly imprinted poly-o-phenylenediamine/gold nanoparticle-ionic liquid-graphene film modified glass carbon electrode.
RSC Advances, 6, (71), 66949-66956, (2016)
   

Yao T et al., Enhancement of surface plasmon resonance signals using a MIP/GNPs/rGO nano-hybrid film for the rapid detection of ractopamine.
Biosensors and Bioelectronics, 75, 96-100, (2016)
   

Yao W

Yan SL et al., Characterization and quality assessment of binding properties of the monocrotophos molecularly imprinted microspheres prepared by precipitation polymerization in toluene.
Polymer Engineering & Science, 47, (9), 1302-1308, (2007)
   

Yao W et al., Study on the synthesis and performance of caffeine molecularly imprinted polymer micro-spheres via precipitation polymerization.
Chemical Industry and Engineering Progress, 26, (6), 869-872, 877, (2007)
   

Gao ZX et al., Quartz Crystal Microbalance for the Determination of Carbaryl Using Molecularly Imprinted Polymers as Recognition Element.
Acta Scientiarum Naturalium Universitatis Nankaiensis (Natural Science Edition), 41, (3), 34-40, (2008)
   

Yao W et al., Adsorption of carbaryl using molecularly imprinted microspheres prepared by precipitation polymerization.
Polymers for Advanced Technologies, 19, (7), 812-816, (2008)
   

Yao W et al., Recognition of Staphylococcus enterotoxin via molecularly imprinted beads.
Journal of Separation Science, 31, (2), 413-418, (2008)
   

Han JG et al., Synthesis and assessment of adsorption properties of endosulfan molecularly imprinted polymers.
Chemical Industry and Engineering Progress, 28, (3), 347-440, (2009)
   

Li GL et al., Development on quartz crystal microbalance for the determination of profenofos using molecularly imprinted polymers as recognition element.
Chinese Journal of Analysis Laboratory, 28, (11), 25-28, (2009)
   

Yao W et al., Quartz crystal microbalance for the detection of carbaryl using molecularly imprinted polymers as recognition element.
Journal of Separation Science, 32, (19), 3334-3339, (2009)
   

Li HX et al., Proceeding, Glucose Molecularly Imprinted Electrochemical Sensor Based on Chitosan and Nickel Oxide Electrode, 
Bhatnagar AK (Ed.), 215-219, (2014)
   

Yao W et al., Polyacrylamide gel beads for the recognition of staphylococcal enterotoxin B.
Polymers for Advanced Technologies, 25, (8), 900-904, (2014)
   

Yao WF

Li S et al., Multi-template molecularly imprinted solid phase extraction and its application in the extraction and separation of multi-components from traditional Chinese medicine.
Acta Pharmaceutica Sinica, 56, (3), 751-760, (2021)
   

Yao WR

Xie YF et al., Selective detection of chloramphenicol in milk based on a molecularly imprinted polymer-surface-enhanced Raman spectroscopic nanosensor.
Journal of Raman Spectroscopy, 48, (2), 204-210, (2017)
   

Xie YF et al., Simultaneous Determination of Erythromycin, Tetracycline, and Chloramphenicol Residue in Raw Milk by Molecularly Imprinted Polymer Mixed with Solid-Phase Extraction.
Food Analytical Methods, 11, (2), 374-381, (2018)
   

Yao X

Zhang L et al., Preparation and Characterization of Broad-Spectrum Artificial Antibody for OPPs Based on Dummy Template Imprinting Technique.
International Journal of Polymer Analysis and Characterization, 19, (6), 510-521, (2014)
   

Yao XC

Zhang H et al., Preparation of ellagic acid molecularly imprinted polymeric microspheres based on distillation-precipitation polymerization for the efficient purification of a crude extract.
Journal of Separation Science, 39, (16), 3098-3104, (2016)
   

Yao XJ

Zhang Y et al., Preparation of molecularly imprinted polymer for vanillin via seed swelling and suspension polymerization.
Polymer Science Series B, 56, (4), 538-545, (2014)
   

Yao YC

He JX et al., Preparation and characterization of molecularly imprinted silica monolith for screening sulfamethazine.
Journal of Separation Science, 33, (20), 3263-3271, (2010)
   

Wang JP et al., Molecularly Imprinted Polymers Solid Phase Extraction Preconcentration Coupled with HPLC.
Food Research and Development, 32, (2), 171-175, (2011)
   

Wang S et al., Rapid determination estrone method on the basis of molecular imprinted polymer.
Science and Technology of Food Industry, 32, (3), 393-395, (2011)
   

Yao YH

Tang YT et al., Well-defined nanostructured surface-imprinted polymers for the highly selective enrichment of low-abundance protein in mammalian cell extract.
New Journal of Chemistry, 40, (12), 10545-10553, (2016)
   

Yao YM

Cao FM et al., Synthesis and application of a highly selective molecularly imprinted adsorbent based on multi-walled carbon nanotubes for selective removal of perfluorooctanoic acid.
Environmental Science: Water Research & Technology, 4, (5), 689-700, (2018)
   

Yao YX

Yin YF et al., Synthesis and Characterization of Emodin Molecularly Imprinted Monolithic Column.
Journal of Instrumental Analysis, 27, (7), 758-761, (2008)
   

Yin YF et al., The Synthesis and Characterization of Metsulforon Methyl Imprinted Polymers with High Binding Capacity.
Journal of Analytical Science, 25, (4), 414-418, (2009)
   

Yao YY

Zhang H et al., Water-Compatible Molecular Imprinting Separation Technique and Its Application in Analytical Chemistry.
Progress In Chemistry, 23, (10), 2140-2150, (2011)
   

Yao ZF

Yao ZF et al., Electrochemical quercetin sensor based on a nanocomposite consisting of magnetized reduced graphene oxide, silver nanoparticles and a molecularly imprinted polymer on a screen-printed electrode.
Microchimica Acta, 185, (1), ArticleNo70-(2018)
   

Yao ZY

Lu DN et al., An ultra-sensitive molecularly imprinted polymer (MIP) and gold nanostars (AuNS) modified voltammetric sensor for facile detection of perfluorooctance sulfonate (PFOS) in drinking water.
Sensors and Actuators B: Chemical, 352, Article131055-(2022)
   

Yapati H

El-Sharif HF et al., Highly selective BSA imprinted polyacrylamide hydrogels facilitated by a metal-coding MIP approach.
Acta Biomaterialia, 28, 121-127, (2015)
   

Yaqub S

Lieberzeit PA et al., Nanostructured Particles and Layers for Sensing Contaminants in Air and Water.
Nano, 3, (4), 205-208, (2008)
   

Yaqub S et al., Plastic antibodies as chemical sensor material for atrazine detection.
Sensors and Actuators B: Chemical, 160, (1), 227-233, (2011)
   

Yarahmadi R

Panjali Z et al., Development of a selective sorbent based on a magnetic ion imprinted polymer for the preconcentration and FAAS determination of urinary cadmium.
Analytical Methods, 7, (8), 3618-3624, (2015)
   

Panjali Z et al., A Simple and Fast Method Based on New Magnetic Ion Im-printed Polymer as a Highly Selective Sorbent for Preconcentra-tion and Determination of Cadmium in Environmental Samples.
Iranian Journal of Public Health, 45, (8), 1044-1053, (2016)
   

Khadem M et al., Modification of Carbon Paste Electrode Based on Molecularly Imprinted Polymer for Electrochemical Determination of Diazinon in Biological and Environmental Samples.
Electroanalysis, 29, (3), 708-715, (2017)
   

Khadem M et al., Development of a specific electrochemical sensor for occupational and environmental monitoring of Diazinon.
Tehran University Medical Journal - Health and Safety at Work, 7, (1), 9-22, (2017)
   

Khadem M et al., Designing and Development of an Electrochemical Sensor Modified with Molecularly Imprinted Polymer and Carbon Nanotubes for Evaluation of Occupational and Environmental Exposures to Dicloran Pesticide.
Iran Occupational Health Journal, 14, (3), 1-12, (2017)
   

Yarahmadi S

Yarahmadi S et al., Hybrid synthetic receptor composed of molecularly imprinted polydopamine and aptamers for impedimetric biosensing of urea.
Microchimica Acta, 186, (2), Article71-(2019)
   

Yaripour S

Yaripour S et al., Electromembrane extraction of tartrazine from food samples: Effects of nano-sorbents on membrane performance.
Journal of Separation Science, 39, (13), 2642-2651, (2016)
   

Yaripour S et al., Electromembrane extraction of phenytoin from biological fluids: A survey on the effects of molecularly imprinted polymer and carbon nanotubes on extraction efficiency.
Microchemical Journal, 156, Article104800-(2020)
   

Yarman A

Yarman A et al., Coupling Biocatalysis with Molecular Imprinting in a Biomimetic Sensor.
Angewandte Chemie International Edition, 52, (44), 11521-11525, (2013)
   

Yarman A et al., Sensors based on cytochrome P450 and CYP mimicking systems.
Electrochimica Acta, 110, 63-72, (2013)
   

Scheller FW et al., Book chapter, Future of Biosensors: A Personal View, 
In: Biosensors Based on Aptamers and Enzymes, Gu MB, Kim HS (Eds.) Springer: Berlin, Heidelberg, 1-28, (2014)
   

Yarman A et al., The First Electrochemical MIP Sensor for Tamoxifen.
Sensors, 14, (5), 7647-7654, (2014)
   

Yarman A et al., Book chapter, Electropolymers for (nano-)imprinted biomimetic biosensors, 
In: Nanosensors for Chemical and Biological Applications: Sensing with Nanotubes, Nanowires and Nanoparticles, Honeychurch KC (Ed.) Woodhead Publishing: Amsterdam, Ch. 6, 125-149, (2014)
   

Bosserdt M et al., Microelectrospotting as a new method for electrosynthesis of surface-imprinted polymer microarrays for protein recognition.
Biosensors and Bioelectronics, 73, 123-129, (2015)
   

Jetzschmann KJ et al., Vectorially Imprinted Hybrid Nanofilm for Acetylcholinesterase Recognition.
Advanced Functional Materials, 25, (32), 5178-5183, (2015)
   

Scheller FW et al., Bio vs. Mimetics in Bioanalysis: An Editorial.
Biochemistry & Analytical Biochemistry, 4, (2), e154-(2015)
   

Scheller FW et al., Book chapter, Electrochemical Approaches for Molecular Surface Imprinting of Polymers Toward Fully Synthetic Receptors for Selective Recognition of Proteins, 
In: Design of Polymeric Platforms for Selective Biorecognition, Rodríguez-Hernández J, Cortajarena AL (Eds.) Springer: Ch. 13, 347-356, (2015)
   

Yarman A et al., Cytochrome c-Derived Hybrid Systems Based on Moleculary Imprinted Polymers.
Electroanalysis, 27, (3), 573-586, (2015)
   

Dechtrirat D et al., Book chapter, Catalytically Active MIP Architectures, 
In: Molecularly Imprinted Catalysts: Principles, Syntheses and Applications, Li SJ, Cao SS, Piletsky SA, Turner APF (Eds.) Elsevier: Amsterdam, Ch. 2, 19-34, (2016)
   

Erdõssy J et al., Electrosynthesized molecularly imprinted polymers for protein recognition.
TrAC Trends in Analytical Chemistry, 79, 179-190, (2016)
   

Menger M et al., MIPs and Aptamers for Recognition of Proteins in Biomimetic Sensing.
Biosensors, 6, (3), ArticleNo35-(2016)
   

Peng L et al., Molecularly Imprinted Electropolymer for a Hexameric Heme Protein with Direct Electron Transfer and Peroxide Electrocatalysis.
Sensors, 16, (3), ArticleNo272-(2016)
   

Yarman A et al., MIP-esterase/Tyrosinase Combinations for Paracetamol and Phenacetin.
Electroanalysis, 28, (9), 2222-2227, (2016)
   

Yarman A et al., Enzymes as Tools in MIP-Sensors.
Chemosensors, 5, (2), ArticleNo11-(2017)
   

Jetzschmann KJ et al., Book chapter, Label-Free MIP Sensors for Protein Biomarkers, 
In: Label-Free Biosensing: Advanced Materials, Devices and Applications, Schöning MJ, Poghossian A (Eds.) Springer International Publishing: Cham, 291-321, (2018)
   

Jetzschmann KJ et al., Molecular LEGO by domain-imprinting of cytochrome P450 BM3.
Colloids and Surfaces B: Biointerfaces, 164, 240-246, (2018)
   

Yarman A, Development of a Molecularly Imprinted Polymer-Based Electrochemical Sensor for Tyrosinase.
Turkish Journal of Chemistry, 42, 346-354, (2018)
   

Zhang XR et al., Electrosynthesized MIPs for transferrin: Plastibodies or nano-filters?
Biosensors and Bioelectronics, 105, 29-35, (2018)
   

Scheller FW et al., Molecularly imprinted polymer-based electrochemical sensors for biopolymers.
Current Opinion in Electrochemistry, 14, 53-59, (2019)
   

Ozcelikay G et al., Au-Pt nanoparticles based molecularly imprinted nanosensor for electrochemical detection of the lipopeptide antibiotic drug Daptomycin.
Sensors and Actuators B: Chemical, 320, Article128285-(2020)
   

Caserta G et al., Insights in electrosynthesis, target binding, and stability of peptide-imprinted polymer nanofilms.
Electrochimica Acta, 381, Article138236-(2021)
   

Yarman A et al., Simple and robust: The claims of protein sensing by molecularly imprinted polymers.
Sensors and Actuators B: Chemical, 330, Article129369-(2021)
   

Zhang XR et al., Out of Pocket

Yarmohammadi M

Samadi-Maybodi A et al., Magnetized ion-imprinted polymer-coated nano-particles for selective separation and trace detection of 203Pb using gamma-ray spectrometry.
Journal of Radioanalytical and Nuclear Chemistry, 316, (2), 465-473, (2018)
   

Yarynka D

Sergeyeva T et al., Fluorescent sensor systems based on nanostructured polymeric membranes for selective recognition of Aflatoxin B1.
Talanta, 175, 101-107, (2017)
   

Sergeyeva T et al., Development of a smartphone-based biomimetic sensor for aflatoxin B1 detection using molecularly imprinted polymer membranes.
Talanta, 201, 204-210, (2019)
   

Yasar M

Yasar M et al., Polymeric nanoparticles for selective protein recognition by using thiol-ene miniemulsion photopolymerization.
Journal of Biomaterials Science-Polymer Edition, 31, (16), 2044-2059, (2020)
   

Yaseen HM

Abdulla NI et al., Potentiometric Transducers for the Selective Recognition of Risperidone Based on Molecularly Imprinted Polymer.
Iraqi Journal of Pharmaceutical Science, 24, (2), 30-40, (2015)
   

Yashima E

Goto H et al., Chiral stimuli-responsive gels: Helicity induction in poly(phenylacetylene) gels bearing a carboxyl group with chiral amines.
Journal of the American Chemical Society, 125, (9), 2516-2523, (2003)
   

Yashima E et al., Helical Polymers: Synthesis, Structures, and Functions.
Chemical Reviews, 109, (11), 6102-6211, (2009)
   

Yashiro M

Mori K et al., A Pretreatment-Free, Polymer-Based Platform Prepared by Molecular Imprinting and Post-Imprinting Modifications for Sensing Intact Exosomes.
Angewandte Chemie International Edition, 58, (6), 1612-1615, (2018)
   

Yasin A

Zhi KK et al., Influence of Size and Shape of Silica Supports on the Sol-Gel Surface Molecularly Imprinted Polymers for Selective Adsorption of Gossypol.
Materials, 11, (5), ArticleNo777-(2018)
   

Wang LL et al., Design and synthesis of supramolecular functional monomers bearing urea and norbornene motifs.
RSC Advances, 9, (35), 20058-20064, (2019)
   

Wang LL et al., Molecularly Imprinted Polymers for Gossypol via Sol-Gel, Bulk, and Surface Layer Imprinting-A Comparative Study.
Polymers, 11, (4), ArticleNo602-(2019)
   

Yasinzai M

Yasinzai M et al., Ion imprinted polymer based receptors for sensitive and selective detection of mercury ions in aqueous environment.
Journal of Sensors, ArticleNo8972549-(2018)
   

Asghar N et al., Real-Time and Online Monitoring of Glucose Contents by Using Molecular Imprinted Polymer-Based IDEs Sensor.
Applied Biochemistry and Biotechnology, 189, (4), 1156-1166, (2019)
   

Yasmeen N

Yasmeen N et al., Molecularly imprinted polymer as a synthetic receptor mimic for capacitive impedimetric selective recognition of Escherichia coli K-12.
Analytica Chimica Acta, 1188, Article339177-(2021)
   

Yassari M

Sedghi R et al., Novel molecularly imprinted polymer based on [beta]-cyclodextrin@graphene oxide: Synthesis and application for selective diphenylamine determination.
Journal of Colloid and Interface Science, 503, 47-56, (2017)
   

Sedghi R et al., Thermo-responsive molecularly imprinted polymer containing magnetic nanoparticles: Synthesis, characterization and adsorption properties for curcumin.
Colloids and Surfaces B: Biointerfaces, 162, 154-162, (2018)
   

Sedghi R et al., Corrigendum to "Novel molecularly imprinted polymer based on [beta]-cyclodextrin@graphene oxide: Synthesis and its application for selective diphenylamine determination" [J. Colloid Interface Sci. 503 (2017) 47-56].
Journal of Colloid and Interface Science, 533, 781-781, (2019)
   

Yassen HM

Yassen HM et al., PVC Polymeric Membranes Coated Graphite Electrodes Based on Molecularly Imprinted Polymers for the Selective Determination of Glibenclamide.
Ibn AL-Haitham Journal For Pure and Applied Science, 29, (1), 133-149, (2016)
   

Yasuda K

Tominaga Y et al., Development of molecularly imprinted porous polymers for selective adsorption of gaseous compounds.
Microporous And Mesoporous Materials, 156, (1), 161-165, (2012)
   

Tominaga Y et al., Synthesis of novel polymer type sulfoxide solid phase combined with the porogen imprinting for enabling selective separation of polychlorinated biphenyls.
Chemosphere, 89, (4), 378-382, (2012)
   

Yasumira AAN

Saifuddin N et al., Microwave Enhanced Synthesis of Chitosan-graft-Polyacrylamide Molecularly Imprinted Polymer (MIP) for Selective Extraction of Antioxidants.
E-Journal of Chemistry, 7, (4), 1362-1374, (2010)
   

Yasunaga K

Okahata Y et al., Imprinted chiral molecular recognition in dipeptide crystals immobilized on a quartz-crystal microbalance.
Journal of the Chemical Society-Chemical Communications, (4), 469-470, (1994)
   

Yasuyama T

Yasuyama T et al., A Study of the Various Factors That Affect the Properties of Molecularly Imprinted Polymers.
Chemical and Pharmaceutical Bulletin, 61, (5), 546-550, (2013)
   

Yasuyama T et al., A Study of the Strength of a Template Molecule-A Functional Monomer Interaction That Affects the Performance of Molecularly Imprinted Polymers and Its Application to Chiral Amplification.
Chemical and Pharmaceutical Bulletin, 65, (4), 396-402, (2017)
   

Yatabe R

Liu CJ et al., Molecularly Imprinted Sol-Gel-Based QCM Sensor Arrays for the Detection and Recognition of Volatile Aldehydes.
Sensors, 17, (2), ArticleNo382-(2017)
   

Yatim NI

Ariffin MM et al., Selective surface characteristics and extraction performance of a nitro-group explosive molecularly imprinted polymer.
Malaysian Journal of Analytical Sciences, 19, (3), 574-585, (2015)
   

Yatsimirsky AK

Yatsimirsky AK, Book chapter, Enzyme Mimics, 
In: Encyclopedia of Supramolecular Chemistry, Atwood JL, Steed JW (Eds.) Taylor and Francis: 546-553, (2001)
   

Nikitina VN et al., Molecular imprinting of boronate functionalized polyaniline for enzyme-free selective detection of saccharides and hydroxy acids.
Sensors and Actuators B: Chemical, 246, 428-433, (2017)
   

Yau KY

Liu ZL et al., Book chapter, Future Perspectives and Challenges, 
In: Immunoassays in Agricultural Biotechnology, Shan GM (Ed.) John Wiley & Sons, Inc.: Hoboken, New Jersey, 325-339, (2011)
   

Yavo N

Riskin M et al., Stereoselective and Chiroselective Surface Plasmon Resonance (SPR) Analysis of Amino Acids by Molecularly Imprinted Au-Nanoparticle Composites.
Chemistry - A European Journal, 16, (24), 7114-7120, (2010)
   

Yavuz H

Yavuz H et al., Iron removal from human plasma based on molecular recognition using imprinted beads.
Materials Science and Engineering: C, 25, (4), 521-528, (2005)
   

Yavuz H et al., Molecular recognition based iron removal from human plasma with imprinted membranes.
International Journal of Artificial Organs, 29, (9), 900-911, (2006)
   

Yavuz H et al., Synthesis of cholesterol imprinted polymeric particles.
International Journal of Biological Macromolecules, 41, (1), 8-15, (2007)
   

Caktu K et al., Cholesterol removal from intestinal mimicking solution by MIP technology.
Current Opinion in Biotechnology, 22, (Supplement 1), S109-S109, (2011)
   

Koç I et al., Selective removal of 17[beta]-estradiol with molecularly imprinted particle-embedded cryogel systems.
Journal of Hazardous Materials, 192, (3), 1819-1826, (2011)
   

Andaç M et al., Molecularly imprinted composite cryogel for albumin depletion from human serum.
Journal of Molecular Recognition, 25, (11), 555-563, (2012)
   

Ergün B et al., Ion imprinted beads embedded cryogels for in vitro removal of iron from [beta]-thalassemic human plasma.
Journal of Applied Polymer Science, 125, (1), 254-262, (2012)
   

Çaktü K et al., Cholesterol removal from various samples by cholesterol-imprinted monosize microsphere-embedded cryogels.
Artificial Cells, Nanomedicine, and Biotechnology, 42, (6), 365-375, (2014)
   

Andac M et al., Book chapter, Molecularly Imprinted Cryogels for Human Serum Albumin Depletion, 
In: Affinity Chromatography, Reichelt S (Ed.) Springer: New York, 233-237, (2015)
   

Çiek Ç et al., Molecularly Imprinted Quartz Crystal Microbalance Sensor (QCM) for Bilirubin Detection.
Chemosensors, 4, (4), ArticleNo21-(2016)
   

Akgönüllü S et al., Preparation of imprinted cryogel cartridge for chiral separation of l-phenylalanine.
Artificial Cells, Nanomedicine, and Biotechnology, 45, (4), 800-807, (2017)
   

Öncel P et al., Molecularly imprinted cryogel membranes for mitomycin C delivery.
Journal of Biomaterials Science-Polymer Edition, 28, (6), 519-531, (2017)
   

Saylan Y et al., Molecular Imprinting of Macromolecules for Sensor Applications.
Sensors, 17, (4), ArticleNo898-(2017)
   

Battal D et al., Molecularly imprinted polymer based quartz crystal microbalance sensor system for sensitive and label-free detection of synthetic cannabinoids in urine.
Biosensors and Bioelectronics, 111, 10-17, (2018)
   

Jalilzadeh M et al., Oral Chelation Therapy for Cadmium Poisoning with Cd(II)- MAC Imprinted pHEMAC Nanoparticles.
Hacettepe Journal of Biology and Chemistry, 46, (4), 505-514, (2018)
   

Saylan Y et al., Molecularly Imprinted Polymer Based Sensors for Medical Applications.
Sensors, 19, (6), ArticleNo1279-(2019)
   

Akgönüllü S et al., Rapid and sensitive detection of synthetic cannabinoids JWH-018, JWH-073 and their metabolites using molecularly imprinted polymer-coated QCM nanosensor in artificial saliva.
Microchemical Journal, 153, Article104454-(2020)
   

Akgönüllü S et al., SPR nanosensor based on molecularly imprinted polymer film with gold nanoparticles for sensitive detection of aflatoxin B1.
Talanta, 219, Article121219-(2020)
   

Bereli N et al., Molecular Imprinting Technology for Biomimetic Assemblies.
Hacettepe Journal of Biology and Chemistry, 48, (5), 575-601, (2020)
   

Bereli N et al., Protein chromatography by molecular imprinted cryogels.
Journal of Liquid Chromatography & Related Technologies, 43, (15-16), 657-670, (2020)
   

Razym G et al., Surface-imprinted silica particles for Concanavalin A purification from Canavalia ensiformis.
Journal of Chromatography B, 1136, Article121852-(2020)
   

Yawari E

Ahmadi F et al., Computational design of an enantioselective molecular imprinted polymer for the solid phase extraction of S-warfarin from plasma.
Journal of Chromatography A, 1338, 9-16, (2014)
   

Yawari I

Yawari I et al., Determination of (S)-warfarin using an activated screen printed gold electrode modified with gold nanoparticles and an enantioselective molecularly imprinted polymer.
Analytical Methods, 9, (46), 6583-6589, (2017)
   

Yawer H

Piletska E et al., Biomimetic Silica Nanoparticles Prepared by a Combination of Solid-Phase Imprinting and Ostwald Ripening.
Scientific Reports, 7, (1), ArticleNo11537-(2017)
   

Yazan Y

Demirel M et al., Propranolol HCl Imprinted Polymeric Microspheres: Development, Characterization and Dissolution.
FABAD Journal of Pharmaceutical Sciences, 32, (4), 147-157, (2007)
   

Yenilmez E et al., Formulation, characterization and in vivo efficacy of [alpha]-tocopherol imprinted polymeric system for cosmetic application.
European International Journal of Science and Technology, 6, (2), 11-20, (2017)
   

Yazd SS

Etemadi M et al., Selective adsorption of Cr(VI) ions from aqueous solutions using Cr6+-imprinted Pebax/chitosan/GO/APTES nanofibrous adsorbent.
International Journal of Biological Macromolecules, 95, 725-733, (2017)
   

Yazdani Asrami M

Yazdani Asrami M et al., Proceeding, Synthesis and Characterization of Dexamethasone Imprinted Polymers Nanospheres prepared by precipitation polymerization as an adsorbent for selective removal of Dexamethasone from contaminated water, 
(2016)
   

Yazdani Z

Yazdani Z et al., A molecularly imprinted electrochemical nanobiosensor for prostate specific antigen determination.
Analytical Biochemistry, 566, 116-125, (2019)
   

Yazdani-Pedram M

Folch-Cano C et al., Inclusion and Functionalization of Polymers with Cyclodextrins: Current Applications and Future Prospects.
Molecules, 19, (9), 14066-14079, (2014)
   

Yazdanian N

Yazdanian N et al., Proceeding, Synthesis and characterization of Al (III)-ion imprinted polymer as a new sorbent for separation and preconcentration of aluminium, 
(2011)
   

Yazdanian N et al., Improving the determination of celecoxib in body fluids and pharmaceuticals using a new selective and thermosensitive molecularly imprinted poly(vinylidene fluoride) membrane.
Analytical Methods, 12, (16), 2185-2195, (2020)
   

Yazdanparast R

Esmaeili MA et al., Molecularly imprinted poly [beta]-cyclodextrin polymer: Application in protein refolding.
Biochimica et Biophysica Acta (BBA) - General Subjects, 1770, (6), 943-950, (2007)
   

Yazdanshenas ME

Dehghani M et al., Determination of cefixime using a novel electrochemical sensor produced with gold nanowires/graphene oxide/electropolymerized molecular imprinted polymer.
Materials Science and Engineering: C, 96, 654-660, (2019)
   

Yazici T

Özer ET et al., Dummy molecularly imprinted microbeads as solid-phase extraction material for selective determination of phthalate esters in water.
Journal of Chromatography A, 1500, 53-60, (2017)
   

Yañez F

Alvarez-Lorenzo C et al., Ocular drug delivery from molecularly-imprinted contact lenses.
Journal of Drug Delivery Science and Technology, 20, (4), 237-248, (2010)
   

Braga MEM et al., Improved drug loading/release capacities of commercial contact lenses obtained by supercritical fluid assisted molecular imprinting methods.
Journal of Controlled Release, 148, (1), e102-e104, (2010)
   

Yañez F et al., Computational modeling and molecular imprinting for the development of acrylic polymers with high affinity for bile salts.
Analytica Chimica Acta, 659, (1-2), 178-185, (2010)
   

Yañez F et al., Timolol-imprinted soft contact lenses: Influence of the template: Functional monomer ratio and the hydrogel thickness.
Journal of Applied Polymer Science, 122, (2), 1333-1340, (2011)
   

Yañez F et al., Supercritical fluid-assisted preparation of imprinted contact lenses for drug delivery.
Acta Biomaterialia, 7, (3), 1019-1030, (2011)
   

Yañez-Gomez F

Alvarez-Lorenzo C et al., Book chapter, Modular biomimetic drug delivery systems, 
In: Polymeric Materials, Medicinal and Pharmaceutical Applications, Dumitriu S, Popa V (Eds.) CRC Press: Boca Raton, Ch. 4, 85-122, (2013)
   

Ye BC

Li YC et al., Novel Electrochemical Sensing Platform Based on a Molecularly Imprinted Polymer Decorated 3D Nanoporous Nickel Skeleton for Ultrasensitive and Selective Determination of Metronidazole.
ACS Applied Materials & Interfaces, 7, (28), 15474-15480, (2015)
   

Liu J et al., Preparation and characterization of erythromycin molecularly imprinted polymers based on distillation-precipitation polymerization.
Journal of Separation Science, 38, (17), 3103-3109, (2015)
   

Li YC et al., Supportless electrochemical sensor based on molecularly imprinted polymer modified nanoporous microrod for determination of dopamine at trace level.
Biosensors and Bioelectronics, 78, 308-314, (2016)
   

Li YC et al., Fabrication of ultra-sensitive and selective dopamine electrochemical sensor based on molecularly imprinted polymer modified graphene@carbon nanotube foam.
Electrochemistry Communications, 64, 42-45, (2016)
   

Li YC et al., A novel sensitive and selective electrochemical sensor based on molecularly imprinted polymer on a nanoporous gold leaf modified electrode for warfarin sodium determination.
RSC Advances, 6, (49), 43724-43731, (2016)
   

Liu J et al., Electrochemical sensor based on molecularly imprinted polymer for sensitive and selective determination of metronidazole via two different approaches.
Analytical and Bioanalytical Chemistry, 408, (16), 4287-4295, (2016)
   

Song H et al., Molecularly imprinted polymer functionalized nanoporous Au-Ag alloy microrod: Novel supportless electrochemical platform for ultrasensitive and selective sensing of metronidazole.
Electrochimica Acta, 208, 10-16, (2016)
   

Zhang B et al., Ultrasensitive and selective assay of glutathione species in arsenic trioxide-treated leukemia HL-60 cell line by molecularly imprinted polymer decorated electrochemical sensors.
Biosensors and Bioelectronics, 80, 491-496, (2016)
   

Zhang L et al., Pneumocandin B0-imprinted Polymer Using Surface-imprinting Technique for Efficient Purification of Crude Product.
Analytical Sciences, 32, (9), 923-930, (2016)
   

Liu Y et al., Highly sensitive and selective voltammetric determination of dopamine using a gold electrode modified with a molecularly imprinted polymeric film immobilized on flaked hollow nickel nanospheres.
Microchimica Acta, 184, (5), 1285-1294, (2017)
   

Li YG et al., A robust electrochemical sensing platform using carbon paste electrode modified with molecularly imprinted microsphere and its application on methyl parathion detection.
Biosensors and Bioelectronics, 106, 71-77, (2018)
   

Li YG et al., A robust electrochemical sensing of molecularly imprinted polymer prepared by using bifunctional monomer and its application in detection of cypermethrin.
Biosensors and Bioelectronics, 127, 207-214, (2019)
   

Wang DY et al., Novel electrochemical sensing platform based on integration of molecularly imprinted polymer with Au@Ag hollow nanoshell for determination of resveratrol.
Talanta, 196, 479-485, (2019)
   

Ma WW et al., Novel electrochemical sensing platform based on ion imprinted polymer with nanoporous gold for ultrasensitive and selective determination of As3+.
Microchimica Acta, 187, (10), Article571-(2020)
   

Li X et al., A high sensitivity electrochemical sensor based on a dual-template molecularly imprinted polymer for simultaneous determination of clenbuterol hydrochloride and ractopamine.
Analyst, 146, (20), 6323-6332, (2021)
   

Li X et al., Specific adsorption and highly sensitive detection of methyl red in wastewater using an iron paste electrode modified with a molecularly imprinted polymer.
Electrochemistry Communications, 132, Article107144-(2021)
   

Li YG et al., A novel electrochemical sensor based on molecularly imprinted polymer-modified C-ZIF67@Ni for highly sensitive and selective determination of carbendazim.
Talanta, 237, Article122909-(2022)
   

Ye BJ

Ao JX et al., A novel ion-imprinted amidoxime-functionalized UHMWPE fiber based on radiation-induced crosslinking for selective adsorption of uranium.
RSC Advances, 9, (49), 28588-28597, (2019)
   

Ye BQ

Tang T et al., Preparation of Surface Molecularly Imprinted Polymer Based on CNTs/SiO2 and Its Application in Electrochemical Detecting Rutin.
Journal of Instrumental Analysis, 34, (11), 1253-1258, (2015)
   

Ye C

Wang P et al., Preparation of hydrophilic molecularly imprinted polymers for tetracycline antibiotics recognition.
Chinese Chemical Letters, 22, (5), 611-614, (2011)
   

Zhu QJ et al., Research progress in anti-oxidative and thermo-sensitive lipoic acid molecularly imprinted polymers.
Journal of Food Safety and Quality, 4, (6), 1785-1789, (2013)
   

Xu L et al., Chitosan in Molecularly-Imprinted Polymers: Current and Future Prospects.
International Journal of Molecular Sciences, 16, 18328-18347, (2015)
   

Xu L et al., Preparation and application of molecularly imprinted polymers based on chitosan.
Chemical Industry and Engineering Progress, 35, (3), 847-855, (2016)
   

Wang P et al., Fluorescent, magnetic dual-responsive molecularly imprinted polymers for the selective detection of moxidectin in animal samples.
Journal of the Iranian Chemical Society, 14, (4), 755-762, (2017)
   

Huang YA et al., Development of an active packaging with molecularly imprinted polymers for beef preservation.
Packaging Technology and Science, 31, (4), 213-220, (2018)
   

Ye CZ

Ye CZ et al., Highly sensitive detection to gallic acid by polypyrrole-based MIES supported by MOFs-Co2+@Fe3O4.
Journal of Electroanalytical Chemistry, 859, Article113839-(2020)
   

Ye CZ et al., Study on the properties and reaction mechanism of polypyrrole@norfloxacin molecularly imprinted electrochemical sensor based on three-dimensional CoFe-MOFs/AuNPs.
Electrochimica Acta, 379, Article138174-(2021)
   

Ye DX

Yang H et al., Molecularly imprinted electrochemical sensor based on bioinspired Au microflowers for ultra-trace cholesterol assay.
Biosensors and Bioelectronics, 92, 748-754, (2017)
   

Duan DD et al., Three-dimensional molecularly imprinted electrochemical sensor based on Au NPs@Ti-based metal-organic frameworks for ultra-trace detection of bovine serum albumin.
Electrochimica Acta, 261, 160-166, (2018)
   

An JX et al., A novel molecularly imprinted electrochemical sensor based on Prussian blue analogue generated by iron metal organic frameworks for highly sensitive detection of melamine.
Electrochimica Acta, 326, Article134946-(2019)
   

Ye GB

Zhang HT et al., The Application of Molecularly Imprinted Polymer Sensor in Pesticide Detection.
Chinese Journal of Pesticide Science, 8, (1), 8-13, (2006)
   

Ye GR

Zhou L et al., A capacitive sensor based on molecularly imprinted polymers and poly(p-aminobenzene sulfonic acid) film for detection of pazufloxacin mesilate.
Science in China Series B: Chemistry, 50, (4), 547-553, (2007)
   

Ye H

Wu SJ et al., A Review of the Methods for Detection of Staphylococcus aureus Enterotoxins.
Toxins, 8, (7), ArticleNo176-(2016)
   

Ye HL

Feng ZF et al., Fast Extraction and Detection of 4-Methylimidazole in Soy Sauce Using Magnetic Molecularly Imprinted Polymer by HPLC.
Molecules, 22, (11), ArticleNo1885-(2017)
   

Yang LT et al., A novel quercetin electrochemical sensor based on molecularly imprinted poly(para-aminobenzoic acid) on 3D Pd nanoparticles-porous graphene-carbon nanotubes composite.
Sensors and Actuators B: Chemical, 251, 601-608, (2017)
   

Ye HL et al., Preparations of magnetic molecularly imprinted polymer for selective recognition and determination of 4-methylimidazole in soft beverage by high performance liquid chromatography.
Adsorption Science & Technology, 35, (1-2), 37-54, (2017)
   

Zhao LJ et al., Preparation of hydrophilic surface-imprinted ionic liquid polymer on multi-walled carbon nanotubes for the sensitive electrochemical determination of imidacloprid.
RSC Advances, 7, (8), 4704-4709, (2017)
   

Zhang XM et al., Silicon nanoparticles coated with an epitope-imprinted polymer for fluorometric determination of cytochrome c.
Microchimica Acta, 185, (3), ArticleNo173-(2018)
   

Ye HP

Ye HP et al., Magnetic molecularly imprinted polymers for extraction of S-phenylmercapturic acid from urine samples followed by high-performance liquid chromatography.
Journal of Molecular Recognition, 34, (11), Article_e2930-(2021)
   

Ye J

Wang SS et al., Affinity-tunable specific recognition of glycoproteins via boronate affinity-based controllable oriented surface imprinting.
Chemical Science, 5, (3), 1135-1140, (2014)
   

Ye J et al., A Boronate Affinity Sandwich Assay: An Appealing Alternative to Immunoassays for the Determination of Glycoproteins.
Angewandte Chemie International Edition, 53, (39), 10386-10389, (2014)
   

Bie ZJ et al., Boronate-Affinity Glycan-Oriented Surface Imprinting: A New Strategy to Mimic Lectins for the Recognition of an Intact Glycoprotein and Its Characteristic Fragments.
Angewandte Chemie International Edition, 54, (35), 10211-10215, (2015)
   

Wang ZH et al., The synthesis of hydrophilic molecularly imprinted polymer microspheres and their application for selective removal of bisphenol A from water.
Reactive and Functional Polymers, 116, 69-76, (2017)
   

Wang ZH et al., The synthesis of molecular recognition polymer particles via miniemulsion polymerization.
Reactive and Functional Polymers, 126, 1-8, (2018)
   

Wang ZH et al., Polymerization induced shaping of Pickering emulsion droplets: From simple hollow microspheres to molecularly imprinted multicore microrattles.
Chemical Engineering Journal, 332, 409-418, (2018)
   

Wang ZH et al., The building of molecularly imprinted single hole hollow particles: A miniemulsion polymerization approach.
Chemical Engineering Journal, 357, 348-357, (2019)
   

Ye J et al., The building of molecular imprinted sites on the Stöber spheres of resorcinol-formaldehyde resin: In situ organic vs. inorganic imprinting method.
Materials Chemistry and Physics, 230, 239-248, (2019)
   

Ye JP

Ye JP et al., Molecularly imprinted ratiometric fluorescent probe for visual and fluorescent determination of aristolochic acid I based on a Schiff-base fluorescent compound.
Microchimica Acta, 187, (11), Article623-(2020)
   

Ye JS

Zhao WY et al., Development of a novel sensing platform based on molecularly imprinted polymer and closed bipolar electrochemiluminescence for sensitive detection of dopamine.
Journal of Electroanalytical Chemistry, 888, Article115215-(2021)
   

Ye L

Ramström O et al., Artificial antibodies to corticosteroids prepared by molecular imprinting.
Chemistry & Biology, 3, (6), 471-477, (1996)
   

Ramström O et al., Molecularly imprinted materials - Their use in separations, immunoassay-type analyses and syntheses.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 129-129, (1997)
   

Ramström O et al., Chiral recognition by molecularly imprinted polymers in aqueous media.
Chromatographia, 48, (3-4), 197-202, (1998)
   

Ramström O et al., Applications of molecularly imprinted materials as selective adsorbents: Emphasis on enzymatic equilibrium shifting and library screening.
Chromatographia, 47, (7-8), 465-469, (1998)
   

Ramström O et al., Book chapter, Recent advances in the use of molecularly imprinted materials in separation and synthesis, 
In: Molecular and Ionic Recognition with Imprinted Polymers, Bartsch RA, Maeda M (Eds.) The American Chemical Society: Washington DC, Ch. 5, 82-89, (1998)
   

Ramström O et al., Screening of a combinatorial steroid library using molecularly imprinted polymers.
Analytical Communications, 35, (1), 9-11, (1998)
   

Ye L et al., Molecularly imprinted polymeric adsorbents for byproduct removal.
Analytical Chemistry, 70, (14), 2789-2795, (1998)
   

Ye L et al., A new application of molecularly imprinted materials.
Journal of Molecular Recognition, 11, (1-6), 75-78, (1998)
   

Ye L et al., Molecularly imprinted monodisperse microspheres for competitive radioassay.
Analytical Communications, 36, (2), 35-38, (1999)
   

Ye L et al., Use of molecularly imprinted polymers in a biotransformation process.
Biotechnology and Bioengineering, 64, (6), 650-655, (1999)
   

Brüggemann O et al., New configurations and applications of molecularly imprinted polymers.
Journal of Chromatography A, 889, (1-2), 15-24, (2000)
   

Surugiu I et al., An enzyme-linked molecularly imprinted sorbent assay.
Analyst, 125, (1), 13-16, (2000)
   

Ye L et al., Synthesis and characterization of molecularly imprinted microspheres.
Macromolecules, 33, (22), 8239-8245, (2000)
   

Janotta M et al., Molecularly imprinted polymers for nitrophenols - An advanced separation material for environmental analysis.
International Journal of Environmental Analytical Chemistry, 80, (2), 75-86, (2001)
   

Mosbach K et al., Generation of new enzyme inhibitors using imprinted binding sites: The anti-idiotypic approach, a step toward the next generation of molecular imprinting.
Journal of the American Chemical Society, 123, (49), 12420-12421, (2001)
   

Surugiu I et al., Development of a flow injection capillary chemiluminescent ELISA using an imprinted polymer instead of the antibody.
Analytical Chemistry, 73, (17), 4388-4392, (2001)
   

Surugiu I et al., Chemiluminescence imaging ELISA using an imprinted polymer as the recognition element instead of an antibody.
Analytical Chemistry, 73, (3), 487-491, (2001)
   

Ye L et al., Polymers recognizing biomolecules based on a combination of molecular imprinting and proximity scintillation: A new sensor concept.
Journal of the American Chemical Society, 123, (12), 2901-2902, (2001)
   

Ye L et al., Molecular imprinting on microgel spheres.
Analytica Chimica Acta, 435, (1), 187-196, (2001)
   

Ye L et al., Towards the development of molecularly imprinted artificial receptors for the screening of estrogenic chemicals.
Analyst, 126, (6), 760-765, (2001)
   

Ye L et al., Molecularly imprinted microspheres as antibody binding mimics.
Reactive and Functional Polymers, 48, (1-3), 149-157, (2001)
   

Ye L et al., The technique of molecular imprinting - Principle, state of the art, and future aspects.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 41, (1-4), 107-113, (2001)
   

Yilmaz E et al., Book chapter, The use of imprinted polymers as recognition elements in biosensors and binding assays, 
In: Novel Approaches In Biosensors And Rapid Diagnostic Assays, Liron Z, Bromberg A, Fisher M (Eds.) Kluwer Academic/Plenum Publishers: New York, Ch. 14, 193-209, (2001)
   

Ye L, Proceeding, Molecularly imprinted materials: Towards the next generation, 
Shea KJ, Yan M, Roberts MJ, Cremer PS, Crooks RM, Sailor MJ (Eds.), 51-59, (2002)
   

Ye L et al., Scintillation proximity assay using molecularly imprinted microspheres.
Analytical Chemistry, 74, (5), 959-964, (2002)
   

Yu YH et al., Formation of a class of enzyme inhibitors (drugs), including a chiral compound, by using imprinted polymers or biomolecules as molecular-scale reaction vessels.
Angewandte Chemie International Edition, 41, (23), 4459-4463, (2002)
   

Yu YH et al., Removal of the fermentation by-product succinyl L-tyrosine from the b-lactamase inhibitor clavulanic acid using a molecularly imprinted polymer.
Biotechnology and Bioengineering, 79, (1), 23-28, (2002)
   

Ye L et al., Molecularly imprinted polymers as antibody and receptor mimics for assays, sensors and drug discovery.
Analytical and Bioanalytical Chemistry, 378, (8), 1887-1897, (2004)
   

Ye L, Book chapter, Molecularly imprinted micro- and nano-particles by precipitation polymerization, 
In: Molecularly Imprinted Materials-2003, Kofinas P, Sellergren B, Roberts MJ (Eds.) Materials Research Society: Warrendale, Ch. 14, 97-102, (2004)
   

Isarankura-Na-Ayudhya C et al., Construction of Molecularly Imprinted Polymers for Cholesterol by Semi-covalent Imprinting Approach and Nitroxide Mediated Radical Polymerization.
Thammasat International Journal of Science and Technology, 10, (4), 1-6, (2005)
   

Piacham T et al., Erratum to "Molecularly imprinted polymer thin films on quartz crystal microbalance using a surface bound photo-radical initiator": [Analytica Chimica Acta 536 (2005) 191-196].
Analytica Chimica Acta, 542, (1), 135-135, (2005)
   

Piacham T et al., Proceeding, Molecularly imprinted polymer as a tool for nanobiosensors and enzyme mimics, 
Art. No. E0119, (2005)
   

Piacham T et al., Molecularly imprinted polymer thin films on quartz crystal microbalance using a surface bound photo-radical initiator.
Analytica Chimica Acta, 536, (1-2), 191-196, (2005)
   

Ye L et al., Book chapter, Molecularly imprinted polymer beads, 
In: Molecularly Imprinted Materials: Science and Technology, Yan M, Ramström O (Eds.) Marcel Dekker: New York, Ch. 17, 435-454, (2005)
   

Ye L, Book chapter, Solid phase extraction and by-product removal, 
In: Molecularly Imprinted Materials: Science and Technology, Yan M, Ramström O (Eds.) Marcel Dekker: New York, Ch. 23, 603-618, (2005)
   

Boonpangrak S et al., Molecularly imprinted polymer microspheres prepared by precipitation polymerization using a sacrificial covalent bond.
Journal of Applied Polymer Science, 99, (4), 1390-1398, (2006)
   

Boonpangrak S et al., Preparation of molecularly imprinted polymers using nitroxide-mediated living radical polymerization.
Biosensors and Bioelectronics, 22, (3), 349-354, (2006)
   

Chronakis IS et al., Encapsulation and Selective Recognition of Molecularly Imprinted Theophylline and 17b-Estradiol Nanoparticles within Electrospun Polymer Nanofibers.
Langmuir, 22, (21), 8960-8965, (2006)
   

Chronakis IS et al., Generation of molecular recognition sites in electrospun polymer nanofibers via molecular imprinting.
Macromolecules, 39, (1), 357-361, (2006)
   

Nantasenamat C et al., In silico design for synthesis of molecularly imprinted microspheres specific towards bisphenol A by precipitation polymerization.
EXCLI Journal, 5, 103-117, (2006)
   

Ye L et al., Preparation of molecularly imprinted polymers in supercritical carbon dioxide.
Journal of Applied Polymer Science, 102, (3), 2863-2867, (2006)
   

Zhang H et al., MIP for Regioselective Huisgen 1, 3-Dipolar Cycloaddition Reaction.
Synfacts, (7), 0742-0742, (2006)
   

Zhang HQ et al., Non-covalent molecular imprinting with emphasis on its application in separation and drug development.
Journal of Molecular Recognition, 19, (4), 248-259, (2006)
   

Zhang HQ et al., Molecularly imprinted nanoreactors for regioselective Huisgen 1, 3-dipolar cycloaddition reaction.
Journal of the American Chemical Society, 128, (13), 4178-4179, (2006)
   

Philip JYN et al., Preparation of Molecularly Imprinted Polymers Using Anacardic Acid Monomers Derived from Cashew Nut Shell Liquid.
Journal of Agricultural and Food Chemistry, 55, (22), 8870-8876, (2007)
   

Yoshimatsu K et al., Uniform molecularly imprinted microspheres and nanoparticles prepared by precipitation polymerization: The control of particle size suitable for different analytical applications.
Analytica Chimica Acta, 584, (1), 112-121, (2007)
   

Isarankura-Na-Ayudhya C et al., Computational Insights on Sulfonamide Imprinted Polymers.
Molecules, 13, (12), 3077-3091, (2008)
   

Priego-Capote F et al., Monoclonal Behavior of Molecularly Imprinted Polymer Nanoparticles in Capillary Electrochromatography.
Analytical Chemistry, 80, (8), 2881-2887, (2008)
   

Reimhult K et al., Characterization of QCM sensor surfaces coated with molecularly imprinted nanoparticles.
Biosensors and Bioelectronics, 23, (12), 1908-1914, (2008)
   

Trikka F et al., Molecularly imprinted polymers that selectively recognize histamine.
FEBS Journal, 275, (Suppl. 1), 373-373, (2008)
   

Ye L et al., Molecular Imprinting: Synthetic Materials As Substitutes for Biological Antibodies and Receptors.
Chemistry of Materials, 20, (3), 859-868, (2008)
   

Yoshimatsu K et al., Selective molecular adsorption using electrospun nanofiber affinity membranes.
Biosensors and Bioelectronics, 23, (7), 1208-1215, (2008)
   

Yoshimatsu K et al., Molecularly imprinted polymer microspheres (spherical OMNiMIPs) prepared by precipitation polymerization using a single bifunctional monomer.
Abstracts of Papers of the American Chemical Society, 236, (ANYL), 388-(2008)
   

Yoshimatsu K et al., A simple method for preparation of molecularly imprinted nanofiber materials with signal transduction ability.
Chemical Communications, (17), 2022-2024, (2008)
   

Feás X et al., Application of dummy molecularly imprinted solid-phase extraction in the analysis of cyproheptadine in bovine urine.
Journal of Separation Science, 32, (10), 1740-1747, (2009)
   

Yang KG et al., One-Pot Synthesis of Hydrophilic Molecularly Imprinted Nanoparticles.
Macromolecules, 42, (22), 8739-8746, (2009)
   

Yoshimatsu K et al., Peptide-imprinted polymer microspheres prepared by precipitation polymerization using a single bi-functional monomer.
Analyst, 134, (4), 719-724, (2009)
   

Feás X et al., Molecularly imprinted polyallylamine hydrogels: another reassessment.
Polymer International, 59, (1), 11-15, (2010)
   

Forchheimer D et al., Molecularly imprinted nanostructures by nanoimprint lithography.
Analyst, 135, (6), 1219-1223, (2010)
   

Yoshimatsu K et al., Corrigendum to "Uniform molecularly imprinted microspheres and nanoparticles prepared by precipitation polymerization: The control of particle size suitable for different analytical applications" [Anal. Chim. Acta 584 (2007) 112-121].
Analytica Chimica Acta, 657, (2), 215-215, (2010)
   

Forchheimer D et al., Molecularly selective nanopatterns using nanoimprint lithography: A label-free sensor architecture.
Journal of Vacuum Science & Technology B, 29, (1), Article No. 011021-(2011)
   

Long YY et al., Insight into molecular imprinting in precipitation polymerization systems using solution NMR and dynamic light scattering.
Journal of Molecular Recognition, 24, (4), 619-630, (2011)
   

Shen XT et al., Molecular imprinting in Pickering emulsions: a new insight into molecular recognition in water.
Chemical Communications, 47, (37), 10359-10361, (2011)
   

Shen XT et al., Interfacial Molecular Imprinting in Nanoparticle-Stabilized Emulsions.
Macromolecules, 44, (14), 5631-5637, (2011)
   

Xu CG et al., Clickable molecularly imprinted nanoparticles.
Chemical Communications, 47, (21), 6096-6098, (2011)
   

Ara B et al., Preparation and characterization of uniform molecularly imprinted polymer beads for separation of triazine herbicides.
Journal of Applied Polymer Science, 126, (1), 315-321, (2012)
   

Chen ZY et al., Controlling size and uniformity of molecularly imprinted nanoparticles using auxiliary template.
Journal of Molecular Recognition, 25, (6), 370-376, (2012)
   

Philip JYN et al., The influence of aliphatic side chain of anacardic acid on molecular recognition properties of imprinted polymers.
Tanzania Journal of Science, 38, (1), 104-117, (2012)
   

Shen XT et al., Imprinted polymer beads enabling direct and selective molecular separation in water.
Soft Matter, 8, (27), 7169-7176, (2012)
   

Shen XT et al., Molecular imprinting of protein in Pickering emulsion.
Chemical Communications, 48, (66), 8198-8200, (2012)
   

Shen XT et al., Molecular imprinting for removing highly toxic organic pollutants.
Chemical Communications, 48, (6), 788-798, (2012)
   

Trikka FA et al., Molecularly imprinted polymers for histamine recognition in aqueous environment.
Amino Acids, 43, (5), 2113-2124, (2012)
   

Xu CG et al., Molecularly imprinted magnetic materials prepared from modular and clickable nanoparticles.
Journal of Materials Chemistry, 22, (15), 7427-7433, (2012)
   

Yoshimatsu K et al., Influence of template/functional monomer/cross-linking monomer ratio on particle size and binding properties of molecularly imprinted nanoparticles.
Journal of Applied Polymer Science, 124, (2), 1249-1255, (2012)
   

Chen ZY et al., Book chapter, Molecularly Imprinted Nanoparticles, 
In: Molecular Imprinting: Principles and Applications of Micro- and Nanostructure Polymers, Ye L (Ed.) Taylor and Francis Group, LLC: Boca Raton, Fl, Ch. 5, 161-196, (2013)
   

Chronakis IS et al., Book chapter, Molecularly Imprinted Micro- and Nanostructures by Electrospinning, 
In: Molecular Imprinting: Principles and Applications of Micro- and Nanostructure Polymers, Ye L (Ed.) Taylor and Francis Group, LLC: Boca Raton, Fl, Ch. 6, 197-220, (2013)
   

Gurtova O et al., Potentiometric propranolol-selective sensor based on molecularly imprinted polymer.
Analytical and Bioanalytical Chemistry, 405, (1), 287-295, (2013)
   

Hajizadeh S et al., Cryogelation of molecularly imprinted nanoparticles: A macroporous structure as affinity chromatography column for removal of [beta]-blockers from complex samples.
Journal of Chromatography A, 1274, 6-12, (2013)
   

Shen XT et al., Molecularly Imprinted Polymers for Clean Water: Analysis and Purification.
Industrial & Engineering Chemistry Research, 52, (39), 13890-13899, (2013)
   

Shen XT et al., Molecular recognition with colloidosomes enabled by imprinted polymer nanoparticles and fluorogenic boronic acid.
Journal of Materials Chemistry B, 1, (36), 4612-4618, (2013)
   

Xu CG et al., Photoconjugation of Molecularly Imprinted Polymer with Magnetic Nanoparticles.
ACS Applied Materials & Interfaces, 5, (11), 5208-5213, (2013)
   

Ye L, Book chapter, New Frontiers in Molecular Imprinting: From Micro- to Nanofabrication, 
In: Molecular Imprinting: Principles and Applications of Micro- and Nanostructure Polymers, Ye L (Ed.) Taylor and Francis Group, LLC: Boca Raton, Fl, Ch. 1, 1-24, (2013)
   

Chaudhary S et al., Controlled short-linkage assembly of functional nano-objects.
Applied Surface Science, 300, 22-28, (2014)
   

Malm B et al., Characterization of molecularly imprinted polymer nanoparticles by photon correlation spectroscopy.
Journal of Molecular Recognition, 27, (12), 714-721, (2014)
   

Shen XT et al., Bacterial Imprinting at Pickering Emulsion Interfaces.
Angewandte Chemie International Edition, 53, (40), 10687-10690, (2014)
   

Wu YT et al., Selective and simultaneous determination of trace bisphenol A and tebuconazole in vegetable and juice samples by membrane-based molecularly imprinted solid-phase extraction and HPLC.
Food Chemistry, 164, 527-535, (2014)
   

Zhou TC et al., Molecularly imprinted polymer beads prepared by Pickering emulsion polymerization for steroid recognition.
Journal of Applied Polymer Science, 131, (1), Art No 39606-(2014)
   

Zhou TC et al., Molecularly imprinted polymer beads for nicotine recognition prepared by RAFT precipitation polymerization: a step forward towards multi-functionalities.
RSC Advances, 4, (57), 30292-30299, (2014)
   

Gurtova OV et al., Effect of plasticizer on the characteristics of molecularly imprinted polymer based potentiometric sensor for propranolol.
Bulletin of Dnipropetrovsk University: Series Chemistry, 21, (19), 20-34, (2015)
   

Kamra T et al., Implementation of Molecularly Imprinted Polymer Beads for Surface Enhanced Raman Detection.
Analytical Chemistry, 87, (10), 5056-5061, (2015)
   

Kamra T et al., Photoconjugation of Molecularly Imprinted Polymer Nanoparticles for Surface-Enhanced Raman Detection of Propranolol.
ACS Applied Materials & Interfaces, 7, (49), 27479-27485, (2015)
   

Kamra T et al., Covalent immobilization of molecularly imprinted polymer nanoparticles using an epoxy silane.
Journal of Colloid and Interface Science, 445, 277-284, (2015)
   

Wu YT et al., Monitoring bisphenol A and its biodegradation in water using a fluorescent molecularly imprinted chemosensor.
Chemosphere, 119, 515-523, (2015)
   

Ye L, Book chapter, Synthetic Strategies in Molecular Imprinting, 
In: Molecularly Imprinted Polymers in Biotechnology, Mattiasson B, Ye L (Eds.) Springer: Berlin, Heidelberg, Ch. 1, 1-24, (2015)
   

Zhou TC et al., Preparation of protein imprinted polymer beads by Pickering emulsion polymerization.
Journal of Materials Chemistry B, 3, (7), 1254-1260, (2015)
   

Kamra T et al., Covalent immobilization of molecularly imprinted polymer nanoparticles on a gold surface using carbodiimide coupling for chemical sensing.
Journal of Colloid and Interface Science, 461, 1-8, (2016)
   

Kamra T et al., Corrigendum to "Covalent immobilization of molecularly imprinted polymer nanoparticles on a gold surface using carbodiimide coupling for chemical sensing" [J. Colloid Interface Sci. 461 (2016) 1-8].
Journal of Colloid and Interface Science, 461, 444-445, (2016)
   

Li QJ et al., A modular approach for assembling turn-on fluorescence sensors using molecularly imprinted nanoparticles.
Chemical Communications, 52, (82), 12237-12240, (2016)
   

Ye L, Molecularly imprinted polymers with multi-functionality.
Analytical and Bioanalytical Chemistry, 408, (7), 1727-1733, (2016)
   

Ye L et al., Molecular imprinting in particle-stabilized emulsions: enlarging template size from small molecules to proteins and cells.
Molecular Imprinting, 3, (1), 8-16, (2016)
   

Bagán H et al., Synthesis and characterization of epitope-imprinted polymers for purification of human hemoglobin.
RSC Advances, 7, (66), 41705-41712, (2017)
   

Shen XT et al., Book chapter, Generation of Janus Molecularly Imprinted Polymer Particles, 
In: Synthetic Antibodies: Methods and Protocols, Tiller T (Ed.) Springer: New York, NY, 353-362, (2017)
   

Zhang K et al., Book chapter, Characterization of Protein-Protein Interactions in Recombinant Hemoglobin Producing Escherichia coli Cells Using Molecularly Imprinted Polymers, 
In: Oxygen Transport to Tissue XXXIX, Halpern HJ, LaManna JC, Harrison DK, Epel B (Eds.) Springer International Publishing: Cham, 367-373, (2017)
   

de Escobar CC et al., Molecularly imprinted TiO2 photocatalysts for degradation of diclofenac in water.
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 538, 729-738, (2018)
   

Hajizadeh S et al., Composite imprinted macroporous hydrogels for haemoglobin purification from cell homogenate.
Journal of Chromatography A, 1534, 22-31, (2018)
   

Kujawska M et al., Synthesis of naproxen-imprinted polymer using Pickering emulsion polymerization.
Journal of Molecular Recognition, 31, (3), ArticleNoe2626-(2018)
   

Li QJ et al., A paradigm shift design of functional monomers for developing molecularly imprinted polymers.
Chemical Engineering Journal, 350, 217-224, (2018)
   

Li QJ et al., Synthesis of fluorescent molecularly imprinted nanoparticles for turn-on fluorescence assay using one-pot synthetic method and a preliminary microfluidic approach.
Polymer, 138, 352-358, (2018)
   

Zhou TC et al., Preparation of diclofenac-imprinted polymer beads for selective molecular separation in water.
Journal of Molecular Recognition, 31, (3), ArticleNoe2608-(2018)
   

Jiang LD et al., Towards Detection of Glycoproteins Using Molecularly Imprinted Nanoparticles and Boronic Acid-Modified Fluorescent Probe.
Polymers, 11, (1), ArticleNo173-(2019)
   

Zhang K et al., Chromatographic separation of hemoglobin variants using robust molecularly imprinted polymers.
Talanta, 199, 27-31, (2019)
   

Mohamed Idris Z et al., Amino-functionalised silica-grafted molecularly imprinted polymers for chloramphenicol adsorption.
Journal of Environmental Chemical Engineering, 8, (5), Article103981-(2020)
   

Viltres-Portales M et al., Synthesis of molecularly imprinted polymers using an amidine-functionalized initiator for carboxylic acid recognition.
Reactive and Functional Polymers, 165, Article104969-(2021)
   

Ye LB

Tao YG et al., Proceeding, Pb (II)-Imprinted Chitosan/TiO2 Hybrid Film for High Selectivity of Adsorption Lead Ion in Aqueous Solution, 
Jiang ZY, Han JT, Liu XH (Eds.), 484-488, (2010)
   

Ye LF

Feng YG et al., Ordered macroporous quercetin molecularly imprinted polymers: Preparation, characterization, and separation performance.
Journal of Separation Science, 40, (4), 971-978, (2017)
   

Liang C et al., Ordered macroporous molecularly imprinted polymers prepared by a surface imprinting method and their applications to the direct extraction of flavonoids from Gingko leaves.
Food Chemistry, 309, Article125680-(2020)
   

Ye LL

Li HF et al., Core-shell magnetic molecularly imprinted polymer nanoparticles for the extraction of triazophos residues from vegetables.
Microchimica Acta, 184, (4), 1011-1019, (2017)
   

Ye M

Espenschied KG et al., Extraction and Quantification of Bisphenol A from Broth-Based Soup Matrices Using Molecularly Imprinted Solid Phase Extraction.
The Reporter, 33, (3), 24-25, (2015)
   

Ye MJ

Pan SD et al., Synthesis of a monodisperse well-defined core-shell magnetic molecularly-imprinted polymer prior to LC-MS/MS for fast and sensitive determination of mycotoxin residues in rice.
Analytical Methods, 9, (36), 5281-5292, (2017)
   

Pan SD et al., Correction: Synthesis of a monodisperse well-defined core-shell magnetic molecularly-imprinted polymer prior to LC-MS/MS for fast and sensitive determination of mycotoxin residues in rice.
Analytical Methods, 11, (25), 3269-3270, (2019)
   

Ye ML

Zou HF et al., Monolithic stationary phases for liquid chromatography and capillary electrochromatography.
Journal of Chromatography A, 954, (1-2), 5-32, (2002)
   

Qin F et al., Monolithic enantiomer-selective stationary phases for capillary electrochromatography.
Journal of Separation Science, 29, (10), 1332-1343, (2006)
   

Ou JJ et al., Enantioseparation of tetrahydropalmatine and Tröger's base by molecularly imprinted monolith in capillary electrochromatography.
Journal of Biochemical and Biophysical Methods, 70, (1), 71-76, (2007)
   

Ou JJ et al., Preparation and Evaluation of a Molecularly Imprinted Polymer Derivatized Silica Monolithic Column for Capillary Electrochromatography and Capillary Liquid Chromatography.
Analytical Chemistry, 79, (2), 639-646, (2007)
   

Wu RA et al., Recent development of monolithic stationary phases with emphasis on microscale chromatographic separation.
Journal of Chromatography A, 1184, (1-2), 369-392, (2008)
   

Ye MM

Li S et al., Enhanced adsorption of norfloxacin on modified TiO2 particles prepared via surface molecular imprinting technique.
Desalination and Water Treatment, 57, (1), 408-418, (2016)
   

Ye NS

Ye NS et al., Determination of dopamine, epinephrine, and norepinephrine by open-tubular capillary electrochromatography using graphene oxide molecularly imprinted polymers as the stationary phase.
Journal of Separation Science, 37, (16), 2239-2247, (2014)
   

Ye NS et al., Hollow fiber-supported graphene oxide molecularly imprinted polymers for the determination of dopamine using HPLC-PDA.
Analytical Methods, 6, (18), 7518-7524, (2014)
   

Chen XW et al., A graphene oxide surface-molecularly imprinted polymer as a dispersive solid-phase extraction adsorbent for the determination of cefadroxil in water samples.
RSC Advances, 7, (54), 34077-34085, (2017)
   

Ye P

Zhang MS et al., Preparation of Hydroquinone Molecularly Imprinted Polymer Microspheres by Suspension Polymerization in Two-phase System of Ionic Liquid-based Aqueous.
Chinese Journal of Applied Chemistry, 27, (5), 518-522, (2010)
   

Ye Q

Chen XJ et al., The application of molecular imprinting technique in analysis and test.
Journal of Food Safety and Quality, 5, (5), 1459-1467, (2014)
   

Ye QC

Ye QC et al., Preparation of a molecularly imprinted test strip for point-of-care detection of thiodiglycol, a sulfur mustard poisoning metabolic marker.
Talanta, 234, Article122701-(2021)
   

Ye T

Wang JJ et al., Preparation of Novel Molecular Imprinted Film/Au nanoparticlar Modified Electrode for Bromophos ethyl and Its Application.
Chemical Journal of Chinese Universities, 32, (11), 2528-2532, (2011)
   

Ye T et al., One-bath synthesis of hydrophilic molecularly imprinted quantum dots for selective recognition of chlorophenol.
Chinese Chemical Letters, 22, (10), 1253-1256, (2011)
   

Xu MB et al., Synthesis of bovine serum albumin imprinted Mn:ZnS quantum dots.
Chinese Chemical Letters, 23, (12), 1403-1406, (2012)
   

Li QS et al., G-Quadruplex DNA with an Apurinic Site as a Soft Molecularly Imprinted Sensing Platform.
Analytical Chemistry, 90, (9), 5552-5556, (2018)
   

Ye T et al., Colorimetric detection of pyrethroid metabolite by using surface molecularly imprinted polymer.
Sensors and Actuators B: Chemical, 254, 417-423, (2018)
   

Yang P et al., A novel morphological ion imprinted polymers for selective solid phase extraction of Cd(II): Preparation, adsorption properties and binding mechanism to Cd(II).
Reactive and Functional Polymers, 151, Article104569-(2020)
   

Ye T et al., Core-satellite surface imprinting polymer-based pipette tip solid-phase extraction for the colorimetric determination of pyrethroid metabolite.
Microchimica Acta, 187, (7), Article412-(2020)
   

Yin FQ et al., Synthesis and evaluation of mesoporous silica/mesoporous molecularly imprinted nanoparticles as adsorbents for detection and selective removal of imidacloprid in food samples.
Food Chemistry, 364, Article130216-(2021)
   

Ye TT

Hu XG et al., Molecularly imprinted polymer coated on stainless steel fiber for solid-phase microextraction of chloroacetanilide herbicides in soybean and corn.
Journal of Chromatography A, 1217, (38), 5875-5882, (2010)
   

Hu XG et al., Novel liquid-liquid-solid microextraction method with molecularly imprinted polymer-coated stainless steel fiber for aqueous sample pretreatment.
Journal of Chromatography A, 1218, (25), 3935-3939, (2011)
   

Hu XG et al., Molecularly imprinted polymer coated solid-phase microextraction fibers for determination of Sudan I - IV dyes in hot chili powder and poultry feed samples.
Journal of Chromatography A, 1219, (1), 39-46, (2012)
   

Ye WC

Zhang QW et al., Techniques for extraction and isolation of natural products: a comprehensive review.
Chinese Medicine, 13, (1), ArticleNo20-(2018)
   

Ye XB

Ma P et al., A biomimetic Setaria viridis-inspired imprinted nanoadsorbent: green synthesis and application to the highly selective and fast removal of sulfamethazine.
RSC Advances, 6, (12), 9619-9630, (2016)
   

Ye XS

Li QA et al., Strontium and calcium ion adsorption by molecularly imprinted hybrid gel.
Chemical Engineering Journal, 157, (2-3), 401-407, (2010)
   

Ye XS et al., Proceeding, The Preparation and Adsorption Properties of Li+-Imprinted Hybrid Gels, 
Tsing L, Luo AQ (Eds.), 435-440, (2016)
   

Ye XX

Wang CY et al., Molecularly Imprinted Photo-electrochemical Sensor for Human Epididymis Protein 4 Based on Polymerized Ionic Liquid Hydrogel and Gold Nanoparticle/ZnCdHgSe Quantum Dots Composite Film.
Analytical Chemistry, 89, (22), 12391-12398, (2017)
   

Wang YY et al., Voltammetric myoglobin sensor based on a glassy carbon electrode modified with a composite film consisting of carbon nanotubes and a molecularly imprinted polymerized ionic liquid.
Microchimica Acta, 184, (1), 195-202, (2017)
   

Wang X et al., Sensing Platform for Neuron Specific Enolase Based on Molecularly Imprinted Polymerized Ionic Liquids in between Gold Nanoarrays.
Biosensors and Bioelectronics, 99, 34-39, (2018)
   

Wei QX et al., Impedance sensing platform for 4, 4'-dibromobiphenyl based on a molecularly imprinted polymerized ionic liquid film/gold nanoparticle-modified glassy carbon electrode.
Journal of Nanoparticle Research, 20, (11), Article-(2018)
   

Ye XY

Yao QZ et al., Synthesis of TiO2 Hybrid Molecular Imprinted Polymer for Ethofumesate Linked by Silane Coupling Agent.
Journal of Inorganic and Organometallic Polymers and Materials, 18, (4), 477-484, (2008)
   

Li K et al., Highly sensitive and selective detection of naproxen via molecularly imprinted carbon dots as a fluorescent sensor.
RSC Advances, 11, (46), 29073-29079, (2021)
   

Ye Y

Li J et al., Selective determination of trace thiamphenicol in milk and honey by molecularly imprinted polymer monolith microextraction and high-performance liquid chromatography.
Journal of Separation Science, 35, (1), 137-144, (2012)
   

Ma C et al., Preparation of Molecularly Imprinted Polymer Monolith with an Analogue of Thiamphenicol and Application to Selective Solid-Phase Microextraction.
Food Analytical Methods, 5, (6), 1267-1275, (2012)
   

Sun N et al., Determination of sulfamethoxazole in milk using molecularly imprinted polymer monolith microextraction coupled to HPLC.
Microchimica Acta, 179, (1), 33-40, (2012)
   

Liu XF et al., Preparation, characterization and application of organic-inorganic hybrid caffeine imprinted monolith.
Journal of Chromatography A, 1304, 10-17, (2013)
   

Zhang T et al., Selective microextraction of carbaryl and naproxen using organic-inorganic monolithic columns containing a double molecular imprint.
Microchimica Acta, 180, (7-8), 695-702, (2013)
   

Ye YD

Zhang HC et al., A Novel Electrochemical Sensor Based on Molecularly Imprinted Solid-Phase Extraction for Rapid Determination of Ractopamine in Pig Urine.
Analytical Letters, 45, (12), 1736-1748, (2012)
   

Ye YT

Ye YT et al., Theophylline Molecular Imprinted Composite Membranes Prepared on a Ceramic Hollow Fiber Substrate.
Industrial & Engineering Chemistry Research, 53, (1), 346-354, (2014)
   

Zhao HY et al., Synthesis and properties of cadmium(II)-imprinted polymer supported by magnetic multi-walled carbon nanotubes.
Analytical Methods, 6, (23), 9313-9320, (2014)
   

Ye ZB

Huang Y et al., Proceeding, Molecularly Imprinted Polymer-Chemiluminescence Sensor Detect Phentolamine in Urine Sample, 
Chen SA, Liu ZT, Zeng QZ (Eds.), 1841-1844, (2012)
   

Xiong Y et al., Proceeding, Selective Determination of Metformin in Urine Sample Based on Molecularly Imprinted Polymer-Chemiluminescence Sensor, 
Liu ZL, Peng F, Liu XG (Eds.), 798-801, (2012)
   

Xiong Y et al., A microvolume molecularly imprinted polymer modified fiber-optic evanescent wave sensor for bisphenol A determination.
Analytical and Bioanalytical Chemistry, 406, (9-10), 2411-2420, (2014)
   

Ye ZH

Wang PL et al., Determination of Four Kinds of [beta]-Agonists in Swine Urine by Molecularly Imprinted Solid Phase Extraction Followed Gas Chromatography Coupled Mass Spectrometry.
Chinese Journal of Analytical Chemistry, 40, (3), 470-473, (2012)
   

Wang PL et al., Synthesis of ractopamine molecularly imprinted membrane and its application in the rapid determination of three [beta]-agonists in porcine urine samples.
Journal of Separation Science, 36, (8), 1455-1462, (2013)
   

Wang PL et al., Determination of [beta]2-Agonists in Porcine Urine by Molecularly Imprinted Solid Phase Extraction Followed Ultra-Performance Liquid Chromatography-Tandem Mass Spectrometry Detection.
Analytical Letters, 46, (5), 734-744, (2013)
   

Ye ZL

Li X et al., Molecularly imprinted polymer-based sensors for atrazine detection by electropolymerization of o-phenylenediamine.
RSC Advances, 5, (70), 56534-56540, (2015)
   

Ye ZX

Xu J et al., Preparation of the sensor for determination of DEP based on molecularly imprinted polymer.
Chemical Research and Application, 19, (9), 1021-1024, (2007)
   

Xu J et al., Book chapter, Preparation of Molecularly Imprintin Sensor for Cuprum (II) Based on Quartz Crystal Microbalance, 
In: Piezoelectricity, Acoustic Waves and Device Applications, Wang J, Chen WQ (Eds.) World Scientific: 328-331, (2007)
   

Li W et al., Molecularly Imprinted Technique-Flow Injection-Chemoluminescence System Analysis Detect Phenol in Water.
Chinese Journal of Environmental Science, (11), 2829-2834, (2010)
   

Li W et al., Molecularly imprinted technique-flow injection-chemoluminescence system analysis detect phenol in water.
Environmental Science, 31, (11), 2829-2834, (2010)
   

He Q et al., Molecularly imprinted technique-flow injection-molecularl fluorometry detect bisphenol A in water.
Journal of Shanghai Normal University (Natural Sciences), 40, (6), 574-579, (2011)
   

Ye ZX et al., Proceeding, Molecularly imprinted technique-flow injection-chemoluminescence system analysis detect hydroquinone in water, 
3235-3238, (2011)
   

Yebra-Biurrun MC

Yebra-Biurrun MC et al., Flow-Injection Flame Atomic Absorption Determination of Hexavalent Chromium with on-Line Preconcentration on an Anion Imprinted Polymer.
American Journal of Analytical Chemistry, 3, (11), 755-760, (2012)
   

Yechezkel T

Brandis A et al., A two-step strategy to visually identify molecularly imprinted polymers for tagged proteins.
Journal of Separation Science, 40, (16), 3358-3367, (2017)
   

Yeh TL

Chyou JJ et al., Precise determination of the dielectric constant and thickness of a nanolayer by use of surface plasmon resonance sensing and multiexperiment linear data analysis.
Applied Optics, 45, (23), 6038-6044, (2006)
   

Yeh WK

Lee MH et al., Epitope imprinting of alpha-synuclein for sensing in Parkinson's brain organoid culture medium.
Biosensors and Bioelectronics, 175, Article112852-(2021)
   

Lee MH et al., Transition metal dichalcogenides to optimize the performance of peptide-imprinted conductive polymers as electrochemical sensors.
Microchimica Acta, 188, (6), Article203-(2021)
   

Yeh WM

Ho KC et al., Amperometric detection of morphine based on poly(3, 4-ethylenedioxythiophene) immobilized molecularly imprinted polymer particles prepared by precipitation polymerization.
Analytica Chimica Acta, 542, (1), 90-96, (2005)
   

Yeh WM et al., Amperometric morphine sensing using a molecularly imprinted polymer-modified electrode.
Analytica Chimica Acta, 542, (1), 76-82, (2005)
   

Weng CH et al., A microfluidic system utilizing molecularly imprinted polymer films for amperometric detection of morphine.
Sensors and Actuators B: Chemical, 121, (2), 576-582, (2007)
   

Yehl MA

Stephenson CJ et al., Virus imprinting and reuptake in polymer films.
Polymer Preprints, 47, (2), 463-463, (2006)
   

Yemis F

Yemis F et al., Molecularly imprinted polymers and their synthesis by different methods.
Polymers & Polymer Composites, 21, (3), 145-150, (2013)
   

Yen CPH

Kim H et al., Highly Stereospecific Generation of Helical Chirality by Imprinting with Amino Acids: A Universal Sensor for Amino Acid Enantiopurity.
Angewandte Chemie International Edition, 47, (45), 8657-8660, (2008)
   

Yen R

Zhu XX et al., Polymer resins with controlled pore sizes created by reverse micellar imprinting.
Abstracts of Papers of the American Chemical Society, 211, (MSE), 248-248, (1996)
   

Zhu XX et al., Book chapter, New polymer resins with specific pore sizes created by reverse micellar imprinting, 
In: International conference on biorelated polymers, controlled release and reactive polymers, Ch. 87, 23-24, (1997)
   

Zhu XX et al., Pore size control in cross-linked polymer resins by reverse micellar imprinting.
Macromolecules, 30, (10), 3031-3035, (1997)
   

Yenchitsomanus PT

Sukjee W et al., Small-Molecule Dengue Virus Co-imprinting and Its Application as an Electrochemical Sensor.
ChemistryOpen, 6, (3), 340-344, (2017)
   

Yenigül B

Yemis F et al., Molecularly imprinted polymers and their synthesis by different methods.
Polymers & Polymer Composites, 21, (3), 145-150, (2013)
   

Yenigül M

Yemis F et al., Molecularly imprinted polymers and their synthesis by different methods.
Polymers & Polymer Composites, 21, (3), 145-150, (2013)
   

Yenilmez E

Yenilmez E et al., Formulation, characterization and in vivo efficacy of [alpha]-tocopherol imprinted polymeric system for cosmetic application.
European International Journal of Science and Technology, 6, (2), 11-20, (2017)
   

Yeoh CB

Yeoh CB et al., Study Toward the Preparation of Aqueous Compatible Shikimic Acid Imprinted Polymer.
Journal of Oil Palm Research, 27, (1), 90-96, (2015)
   

Yerramilli A

Dasary S et al., Terbium complex fluorescence quenching based detection of organophosphates using molecularly imprinted polymer microbeads.
Abstracts of Papers of the American Chemical Society, 236, (INOR), 517-(2008)
   

Dasary S et al., Fluorescence quenching of lanthanide complexes with nerve agent imprinted polymer microbeads for sensor application.
Abstracts of Papers of the American Chemical Society, 236, (INOR), 224-(2008)
   

Yerramreddy TR

Yerramreddy TR et al., An efficient and metal-free synthesis of 5, 7-dimethylcyclopentenon[2, 3-c]coumarin.
Journal of Chemical Research, Article17475198211046781-(2021)
   

Yesilada A

Tunc Y et al., Comonomer effects on binding performances and morphology of acrylate-based imprinted polymers.
Polymer, 47, (20), 6931-6940, (2006)
   

Yesildag C

Waffo AFT et al., Fully electrochemical MIP sensor for artemisinin.
Sensors and Actuators B: Chemical, 275, 163-173, (2018)
   

Sehit E et al., Ultrasensitive nonenzymatic electrochemical glucose sensor based on gold nanoparticles and molecularly imprinted polymers.
Biosensors and Bioelectronics, 165, Article112432-(2020)
   

Yesilkaya H

Motib A et al., Modulation of Quorum Sensing in a Gram-Positive Pathogen by Linear Molecularly Imprinted Polymers with Anti-infective Properties.
Angewandte Chemie International Edition, 56, (52), 16555-16558, (2017)
   

Yesilova E

Yesilova E et al., Molecularly imprinted particle embedded composite cryogel for selective tetracycline adsorption.
Separation and Purification Technology, 200, 155-163, (2018)
   

Yetimoglu EK

Firlak M et al., Recovery of Au(III) ions by Au(III)-imprinted hydrogel.
Chemical Papers, 70, (6), 757-768, (2016)
   

Yetiskin B

Seven F et al., Imprinting hydrogels with metal ions for metal nanoparticle preparation and use in hydrogen production as catalysis media.
Abstracts of Papers of the American Chemical Society, 245, (POLY), 366-(2013)
   

Yeung CC

Tuwahatu CA et al., The molecularly imprinted polymer essentials: curation of anticancer, ophthalmic, and projected gene therapy drug delivery systems.
Journal of Controlled Release, 287, 24-34, (2018)
   

Venkatesh S et al., Selective and sensitive onsite detection of phthalates in common solvents.
Sensors and Actuators B: Chemical, 259, 650-657, (2018)
   

Yeung KWK

Mao CY et al., The controlled drug release by pH-sensitive molecularly imprinted nanospheres for enhanced antibacterial activity.
Materials Science and Engineering: C, 77, 84-91, (2017)
   

Yeung SY

Pan GQ et al., An Epitope-Imprinted Biointerface with Dynamic Bioactivity for Modulating Cell-Biomaterial Interactions.
Angewandte Chemie International Edition, 56, (50), 15959-15963, (2017)
   

Ertürk G et al., Bisphosphonate ligand mediated ultrasensitive capacitive protein sensor: complementary match of supramolecular and dynamic chemistry.
New Journal of Chemistry, 43, (2), 847-852, (2019)
   

Yi CL

Fang C et al., Electrochemical sensor based on molecular imprinting by photo-sensitive polymers.
Biosensors and Bioelectronics, 24, (10), 3164-3169, (2009)
   

Yang YQ et al., Glucose sensors based on electrodeposition of molecularly imprinted polymeric micelles: A novel strategy for MIP sensors.
Biosensors and Bioelectronics, 26, (5), 2607-2612, (2011)
   

Wang XH et al., Paracetamol Sensor Based on Molecular Imprinting by Photosensitive Polymers.
Electroanalysis, 25, (8), 1907-1916, (2013)
   

Yi CQ

Chen X et al., Liquid chromatography of active principles in Sophora flavescens root.
Journal of Chromatography B, 812, (1-2), 149-163, (2004)
   

Yi D

Lu W et al., Visual detection of 2, 4, 6-trinitrotolune by molecularly imprinted colloidal array photonic crystal.
Journal of Hazardous Materials, 316, 87-93, (2016)
   

Ma XQ et al., Solanesol extraction from tobacco leaves by Flash chromatography based on molecularly imprinted polymers.
Journal of Chromatography B, 1020, 1-5, (2016)
   

Yi H

Lai C et al., A review of titanium dioxide and its highlighted application in molecular imprinting technology in environment.
Journal of the Taiwan Institute of Chemical Engineers, 91, 517-531, (2018)
   

Yi HM

Yang S et al., Proceeding, Preparation and characterization of molecularly imprinted mesoporous organosilica for biphenol Z recognition and separation, 
970-975, (2015)
   

Yi J

Kim Y et al., Advances in environmental technologies via the application of mesoporous materials.
Journal of Industrial and Engineering Chemistry, 10, (1), 41-51, (2004)
   

Yi JC

He YY et al., Efficient removal of Pb(II) from aqueous solution by a novel ion imprinted magnetic biosorbent: Adsorption kinetics and mechanisms.
PLoS ONE, 14, (3), Article_e0213377-(2019)
   

Yi JH

Duan ZJ et al., Novel surface molecularly imprinted sol-gel polymer applied to the online solid phase extraction of methyl-3-quinoxaline-2-carboxylic acid and quinoxaline-2-carboxylic acid from pork muscle.
Analytical and Bioanalytical Chemistry, 401, (7), 2291-2299, (2011)
   

Duan ZJ et al., A sensitive and selective imprinted solid phase extraction coupled to HPLC for simultaneous detection of trace quinoxaline-2-carboxylic acid and methyl-3-quinoxaline-2-carboxylic acid in animal muscles.
Food Chemistry, 139, (1-4), 274-280, (2013)
   

Wang H et al., Immobilization of Carbon Dots in Molecularly Imprinted Microgels for Optical Sensing of Glucose at Physiological pH.
ACS Applied Materials & Interfaces, 7, (29), 15735-15745, (2015)
   

Yi JJ

Wang YT et al., Potentiometric sensors based on surface molecular imprinting: Detection of cancer biomarkers and viruses.
Sensors and Actuators B: Chemical, 146, (1), 381-387, (2010)
   

Yi JT

Zhang WX et al., A novel electrochemical biomimetic sensor based on E-MIP artificial acceptor and SI-ATRP assisted signal amplification.
Journal of Electroanalytical Chemistry, 842, 24-33, (2019)
   

Yi LN

Liu QS et al., Proceeding, A Novel Method for Preparing the Surface Molecularly Imprinted Polymers to Target Isolate Ginsenoside Rg1 and its Analogues, 
Cui CX, Li YL, Yuan ZH (Eds.), 2400-2403, (2012)
   

Yi LN et al., Application of molecularly imprinting technology in efficient separation of active components from Traditional Chinese herb.
Journal of International Pharmaceutical Research, 39, (4), 307-310, (2012)
   

Yi LN et al., Proceeding, Preparation and Properties of Ginsenoside Rg1 Molecularly Imprinted Polymers, 
Liu ZL, Peng F, Liu XG (Eds.), 1715-1718, (2012)
   

Liu QS et al., Comparative study on two polymerization methods for preparing ginsenoside Rg1 molecularly imprinted polymer separating materials.
China Journal of Chinese Materia Medica, 38, (24), 4287-4291, (2013)
   

Liu QS et al., Proceeding, A Novel Extraction Method for Active Compounds from Traditional Chinese Medicinal Materials Environment Friendly, 
Zhao J, Iranpour R, Li XY, Jin B (Eds.), 618-621, (2013)
   

Yi LN et al., Study on directional separation of picroside II from extract of traditional Chinese medicine by molecularly imprinted technology.
China Journal of Chinese Materia Medica, 38, (13), 2136-2139, (2013)
   

Yi LN et al., Preparation of Picroside II Molecularly Imprinted Polymers by Precipitation Polymerization.
Lishizhen Medicine and Materia Medica Research, 24, (5), 1167-1169, (2013)
   

Yi LX

Yi LX et al., Molecularly Imprinted Solid-Phase Extraction in the Analysis of Agrochemicals.
Journal of Chromatographic Science, 51, (7), 608-618, (2013)
   

Fang R et al., On-line preconcentration in capillary electrophoresis for analysis of agrochemical residues.
Journal of Liquid Chromatography & Related Technologies, 37, (10), 1465-1497, (2014)
   

Yi LZ

Liu S et al., Traditional Chinese medicine and separation science.
Journal of Separation Science, 31, (11), 2113-2137, (2008)
   

Yi N

Yi N et al., Research Progress of Sensor Based Molecularly imprinted polymers.
Development and Application of Materials, (1), 117-124, (2013)
   

Yi QY

Lan F et al., Superparamagnetic nanocomposites based on surface imprinting for biomacromolecular recognition.
Materials Science and Engineering: C, 70, (Part 2), 1076-1080, (2017)
   

Yi SC

Jo SH et al., Continuous separation of copper ions from a mixture of heavy metal ions using a three-zone carousel process packed with metal ion-imprinted polymer.
Journal of Chromatography A, 1217, (45), 7100-7108, (2010)
   

Jo SH et al., Development of a four-zone carousel process packed with metal ion-imprinted polymer for continuous separation of copper ions from manganese ions, cobalt ions, and the constituent metal ions of the buffer solution used as eluent.
Journal of Chromatography A, 1218, (33), 5664-5674, (2011)
   

Yi X

Lei XL et al., Preparation of Rhodamine B Molecularly Imprinted Polymer Microspheres and Its Application in Solid Phase Extraction.
Chinese Journal of Applied Chemistry, 28, (5), 531-536, (2011)
   

Yi Y

Liu ZH et al., Cation-Selective Microcontact Printing Based on Surface-Molecular-Imprinted Layer-by-Layer Films.
Advanced Materials, 22, (24), 2689-2693, (2010)
   

Liu ZH et al., Surface Molecular Imprinted Layer-by-Layer Film Attached to a Porous Membrane for Selective Filtration.
Langmuir, 27, (19), 11806-11812, (2011)
   

Yi Y et al., Preparation and Adsorption Studies of Tridentate Monomer-functionalized Lead Ion Imprinted Mesoporous Silica.
Chemistry Letters, 48, (6), 566-569, (2019)
   

Yi YL

Wu JB et al., Removal of cadmium from aqueous solution by organic-inorganic hybrid sorbent combining sol-gel processing and imprinting technique.
Korean Journal of Chemical Engineering, 30, (5), 1111-1118, (2013)
   

Wu JB et al., Sol-gel derived ion imprinted thiocyanato-functionalized silica gel as selective adsorbent of cadmium(II).
Journal of Sol-Gel Science and Technology, 66, (3), 434-442, (2013)
   

Yiannikouris A

Kudupoje MB et al., 300 Contractile response of bovine lateral saphenous vein to ergotamine tartrate exposed to molecularly imprinted polymers - Physiological significance of in vitro studies.
Journal of Animal Science, 95, (supplement4), 148-149, (2017)
   

Kudupoje MB et al., Contractile Response of Bovine Lateral Saphenous Vein to Ergotamine Tartrate Exposed to Different Concentrations of Molecularly Imprinted Polymer.
Toxins, 10, (2), ArticleNo58-(2018)
   

Kudupoje MB et al., Synthesis, Evaluation, and Characterization of an Ergotamine Imprinted Styrene-Based Polymer for Potential Use as an Ergot Alkaloid Selective Adsorbent.
ACS Omega, 6, (45), 30260-30280, (2021)
   

Yerramreddy TR et al., An efficient and metal-free synthesis of 5, 7-dimethylcyclopentenon[2, 3-c]coumarin.
Journal of Chemical Research, Article17475198211046781-(2021)
   

Yie JE

Lee HI et al., Rational design of ordered mesoporous carbon with controlled bimodal porosity via dual silica templating route.
Chemical Communications, (48), 6035-6037, (2005)
   

Yigaimu A

Yang WW et al., Preparation of stoichiometric molecularly imprinted polymer coatings on magnetic particles for the selective extraction of auramine O from water.
Journal of Separation Science, 41, (22), 4185-4193, (2018)
   

Aihebaier S et al., Membrane-Protected Molecularly Imprinted Polymer for the Microextraction of Indole-3-butyric Acid in Mung Bean Sprouts.
ACS Omega, 4, (16), 16789-16793, (2019)
   

Yigaimu A et al., Magnetic Molecularly Imprinted Polymer Particles Based Micro-Solid Phase Extraction for the Determination of 4-Nitrophenol in Lake Water.
Macromolecular Research, 27, (11), 1089-1094, (2019)
   

Yildirim E

Yildirim E et al., Construction of myoglobin imprinted polymer films by grafting from silicon surface.
Journal of Materials Chemistry, 22, (2), 636-642, (2012)
   

Zengin A et al., Molecularly imprinted superparamagnetic iron oxide nanoparticles for rapid enrichment and separation of cholesterol.
Analyst, 138, (23), 7238-7245, (2013)
   

Yildirim E et al., Ibuprofen-imprinted ultrathin poly[N-(2-hydroxypropyl) methacrylamide] films.
Journal of Applied Polymer Science, 135, (4), ArticleNo45707-(2018)
   

Yildiz HB

Menger M et al., MIPs and Aptamers for Recognition of Proteins in Biomimetic Sensing.
Biosensors, 6, (3), ArticleNo35-(2016)
   

Yilmaz E

Yilmaz E et al., Influence of functional and cross-linking monomers and the amount of template on the performance of molecularly imprinted polymers in binding assays.
Analytical Communications, 36, (5), 167-170, (1999)
   

Brüggemann O et al., New configurations and applications of molecularly imprinted polymers.
Journal of Chromatography A, 889, (1-2), 15-24, (2000)
   

Surugiu I et al., An enzyme-linked molecularly imprinted sorbent assay.
Analyst, 125, (1), 13-16, (2000)
   

Yilmaz E et al., The use of immobilized templates - A new approach in molecular imprinting.
Angewandte Chemie International Edition, 39, (12), 2115-2118, (2000)
   

Yamazaki T et al., Towards the use of molecularly imprinted polymers containing imidazoles and bivalent metal complexes for the detection and degradation of organophosphotriester pesticides.
Analytica Chimica Acta, 435, (1), 209-214, (2001)
   

Yilmaz E et al., Book chapter, The use of imprinted polymers as recognition elements in biosensors and binding assays, 
In: Novel Approaches In Biosensors And Rapid Diagnostic Assays, Liron Z, Bromberg A, Fisher M (Eds.) Kluwer Academic/Plenum Publishers: New York, Ch. 14, 193-209, (2001)
   

Yilmaz E et al., A facile method for preparing molecularly imprinted polymer spheres using spherical silica templates.
Journal of Materials Chemistry, 12, (5), 1577-1581, (2002)
   

Yilmaz E, Combining the bioimprinting technique with lipase immobilization for interesterification.
World Journal Of Microbiology & Biotechnology, 18, (7), 621-625, (2002)
   

Yilmaz E, Bio-imprinting of microbial lipase at air-water interface.
World Journal Of Microbiology & Biotechnology, 18, (2), 141-145, (2002)
   

Yilmaz E, Improving the application of microbial lipase by bio-imprinting at substrate-interfaces.
World Journal Of Microbiology & Biotechnology, 18, (1), 37-40, (2002)
   

Bhand SG et al., Coupled biosensor, biomimetic and chemometrics strategies for analysis of the metals in complex environmental matrices.
Journal de Physique IV, 107, 169-172, (2003)
   

Yilmaz E, Orlistat-induced molecular bio-imprinting of microbial lipase.
World Journal Of Microbiology & Biotechnology, 19, (2), 161-165, (2003)
   

Lettau K et al., An esterolytic imprinted polymer prepared via a silica-supported transition state analogue.
Chemistry of Materials, 16, 2745-2749, (2004)
   

Shim YH et al., Chiral recognition and separation of b2-amino acids using noncovalently molecularly imprinted polymers.
Analyst, 129, (12), 1211-1215, (2004)
   

Visnjevski A et al., Catalyzing a cycloaddition with molecularly imprinted polymers obtained via immobilized templates.
Applied Catalysis A: General, 260, (2), 169-174, (2004)
   

Visnjevski A et al., Catalysis of a Diels-Alder cycloaddition with differently fabricated molecularly imprinted polymers.
Catalysis Communications, 6, (9), 601-606, (2005)
   

Xia Y et al., Analysis of the Tobacco-Specific Nitrosamine 4-(Methylnitrosamino)-1-(3-pyridyl)-1-butanol in Urine by Extraction on a Molecularly Imprinted Polymer Column and Liquid Chromatography/Atmospheric Pressure Ionization Tandem Mass Spectrometry.
Analytical Chemistry, 77, (23), 7639-7645, (2005)
   

Ye L et al., Book chapter, Molecularly imprinted polymer beads, 
In: Molecularly Imprinted Materials: Science and Technology, Yan M, Ramström O (Eds.) Marcel Dekker: New York, Ch. 17, 435-454, (2005)
   

Yilmaz E et al., Book chapter, The noncovalent approach, 
In: Molecularly Imprinted Materials: Science and Technology, Yan M, Ramström O (Eds.) Marcel Dekker: New York, Ch. 3, 25-57, (2005)
   

Visnjevski A et al., Erratum to "Catalysis of a Diels-Alder cycloaddition with differently fabricated molecularly imprinted polymers" [Catal. Commun. 6 (9) (2005) 601-606].
Catalysis Communications, 7, (2), 114-114, (2006)
   

Widstrand C et al., Selective extractions by molecularly imprinted polymers (MIPs).
The Column, 2, (2), 20-24, (2006)
   

Widstrand C et al., Analysis of analytes - The use of MIPs in solid-phase extraction increases efficiency and improves detection limits.
Laboratory News, (June), 14-15, (2006)
   

Widstrand C et al., Molecularly imprinted polymers: A new generation of affinity matrices.
American Laboratory, 38, (19), 12-(2006)
   

Boyd B et al., Development of an improved method for trace analysis of chloramphenicol using molecularly imprinted polymers.
Journal of Chromatography A, 1174, (1-2), 63-71, (2007)
   

Mohamed R et al., Advantages of Molecularly Imprinted Polymers LC-ESI-MS/MS for the Selective Extraction and Quantification of Chloramphenicol in Milk-Based Matrixes. Comparison with a Classical Sample Preparation.
Analytical Chemistry, 79, (24), 9557-9565, (2007)
   

Mohamed R et al., Use of Molecularly Imprinted Solid-Phase Extraction Sorbent for the Determination of Four 5-Nitroimidazoles and Three of Their Metabolites from Egg-Based Samples before Tandem LC-ESIMS/MS Analysis.
Journal of Agricultural and Food Chemistry, 56, (10), 3500-3508, (2008)
   

Utku S et al., Ion-Imprinted Thermosensitive Polymers for Fe3+ Removal from Human Plasma.
Hacettepe Journal of Biology and Chemistry, 36, (4), 291-304, (2008)
   

Zorita S et al., Selective determination of acidic pharmaceuticals in wastewater using molecularly imprinted solid-phase extraction.
Analytica Chimica Acta, 626, (2), 147-154, (2008)
   

Vonderheide AP et al., Analysis of permethrin isomers in composite diet samples by molecularly imprinted solid-phase extraction and isotope dilution gas chromatography-ion trap mass spectrometry.
Journal of Chromatography A, 1216, (22), 4633-4640, (2009)
   

Yilmaz E et al., MIP-based processing.
Innovations in Pharmaceutical Technology, (27), 88-91, (2009)
   

Yilmaz E et al., Studies towards enantioselective surface imprinted polymers.
Journal of Separation Science, 32, (19), 3274-3277, (2009)
   

Sener G et al., Quartz crystal microbalance based nanosensor for lysozyme detection with lysozyme imprinted nanoparticles.
Biosensors and Bioelectronics, 26, (2), 815-821, (2010)
   

Chimuka L et al., Selective extraction of triazine herbicides based on a combination of membrane assisted solvent extraction and molecularly imprinted solid phase extraction.
Journal of Chromatography A, 1218, (5), 647-653, (2011)
   

Yalinca Z et al., Evaluation of chitosan tripolyphosphate gel beads as bioadsorbents for iron in aqueous solution and in human blood in vitro.
Journal of Applied Polymer Science, 125, (2), 1493-1505, (2012)
   

Özgür E et al., A new molecular imprinting-based mass-sensitive sensor for real-time detection of 17[beta]-estradiol from aqueous solution.
Environmental Progress & Sustainable Energy, 32, (4), 1164-1169, (2013)
   

Kecili R et al., Fast identification of selective resins for removal of genotoxic aminopyridine impurities via screening of molecularly imprinted polymer libraries.
Journal of Chromatography A, 1339, 65-72, (2014)
   

Yilmaz E et al., Book chapter, Utilizing the Cross-Reactivity of MIPs, 
In: Molecularly Imprinted Polymers in Biotechnology, Mattiasson B, Ye L (Eds.) Springer: Berlin, Heidelberg, Ch. 7, 167-182, (2015)
   

Yilmaz E et al., Whole cell imprinting based Escherichia coli sensors: A study for SPR and QCM.
Sensors and Actuators B: Chemical, 209, 714-721, (2015)
   

Duarte M et al., Solvent-free synthesis of chiral molecularly imprinted polymers: Porosity control using a nano-sized solid porogen.
Journal of Applied Polymer Science, 133, (41), ArticleNo44104-(2016)
   

Bayram E et al., Multiclonal plastic antibodies for selective aflatoxin extraction from food samples.
Food Chemistry, 221, 829-837, (2017)
   

Perçin I et al., Microcontact Imprinted Plasmonic Nanosensors: Powerful Tools in the Detection of Salmonella paratyphi.
Sensors, 17, (6), ArticleNo1375-(2017)
   

Yilmaz E et al., Plastic antibody based surface plasmon resonance nanosensors for selective atrazine detection.
Materials Science and Engineering: C, 73, 603-610, (2017)
   

Yilmaz E et al., Molecular Imprinting Applications in Forensic Science.
Sensors, 17, (4), ArticleNo691-(2017)
   

Duarte M et al., Molecularly imprinted polymers synthesized via template immobilization on fumed silica nanoparticles for the enrichment of phosphopeptides.
Journal of Molecular Recognition, 31, (3), ArticleNoe2677-(2018)
   

Yilmaz F

Say R et al., Preconcentration of copper on ion-selective imprinted polymer microbeads.
Analytica Chimica Acta, 480, (2), 251-258, (2003)
   

Özcan AA et al., Semi-synthetic biotin imprinting onto avidin crosslinked gold-silver nanoparticles.
Journal of Nanoparticle Research, 14, (6), Art No 945-(2012)
   

Asir S et al., Triazine herbicide imprinted monolithic column for capillary electrochromatography.
Electrophoresis, 36, (23), 2888-2895, (2015)
   

Derazshamshir A et al., Molecularly imprinted hydrophobic polymers as a tool for separation in capillary electrochromatography.
Analytical Methods, 7, (6), 2659-2669, (2015)
   

Çiek Ç et al., Molecularly Imprinted Quartz Crystal Microbalance Sensor (QCM) for Bilirubin Detection.
Chemosensors, 4, (4), ArticleNo21-(2016)
   

Çimen D et al., Removal of iron by chelation with molecularly imprinted supermacroporous cryogel.
Artificial Cells, Nanomedicine, and Biotechnology, 44, (4), 1158-1166, (2016)
   

Dibekkaya H et al., Surface plasmon resonance sensors for real-time detection of cyclic citrullinated peptide antibodies.
Journal of Macromolecular Science, Part A, 53, (9), 585-594, (2016)
   

Asir S et al., Dopamine-imprinted monolithic column for capillary electrochromatography.
Electrophoresis, 38, (22-23), 3003-3012, (2017)
   

Saylan Y et al., Molecular Imprinting of Macromolecules for Sensor Applications.
Sensors, 17, (4), ArticleNo898-(2017)
   

Saylan Y et al., Development of surface plasmon resonance sensors based on molecularly imprinted nanofilms for sensitive and selective detection of pesticides.
Sensors and Actuators B: Chemical, 241, 446-454, (2017)
   

Yilmaz F et al., Book chapter, Surface plasmon resonance based nanosensors for detection of triazinic pesticides in agricultural foods, 
In: New Pesticides and Soil Sensors, Grumezescu AM (Ed.) Academic Press: Ch. 18, 679-718, (2017)
   

Göktürk I et al., Protein depletion with bacterial cellulose nanofibers.
Journal of Chromatography B, 1099, 1-9, (2018)
   

Cakir O et al., Novel QCM and SPR sensors based on molecular imprinting for highly sensitive and selective detection of 2, 4-dichlorophenoxyacetic acid in apple samples.
Materials Science and Engineering: C, 102, 483-491, (2019)
   

Safran V et al., Rapid sensing of Cu+2 in water and biological samples by sensitive molecularly imprinted based plasmonic biosensor.
Microchemical Journal, 148, 141-150, (2019)
   

Topçu AA et al., Real time monitoring and label free creatinine detection with artificial receptors.
Materials Science and Engineering: B, 244, 6-11, (2019)
   

Bakhshpour M et al., Detection of Pesticide via Nanoparticle Based Quartz Crystal Microbalance Sensor.
Hacettepe Journal of Biology and Chemistry, 48, (1), 75-82, (2020)
   

Derazshamshir A et al., Phenol removal from wastewater by surface imprinted bacterial cellulose nanofibres.
Environmental Technology, 41, (24), 3134-3145, (2020)
   

Yilmaz F et al., Book chapter, Molecularly Imprinted Sensors for Detecting Controlled Release of Pesticides, 
In: Controlled Release of Pesticides for Sustainable Agriculture, Rakhimol KR, Thomas S, Volova T, Jayachandran K (Eds.) Springer International Publishing: Cham, 207-235, (2020)
   

Bakhshpour M et al., Selective Detection of Penicillin G Antibiotic in Milk by Molecularly Imprinted Polymer-Based Plasmonic SPR Sensor.
Biomimetics, 6, (4), ArticleNo72-(2021)
   

Çakir O et al., Sensitive and selective detection of amitrole based on molecularly imprinted nanosensor.
Journal of Molecular Recognition, 34, (11), Article_e2929-(2021)
   

Safran V et al., Development of Molecularly Imprinted Polymer-Based Optical Sensor for the Sensitive Penicillin G Detection in Milk.
ChemistrySelect, 6, (43), 11865-11875, (2021)
   

Türkmen D et al., Selective dopamine detection by SPR sensor signal amplification using gold nanoparticles.
New Journal of Chemistry, 45, (39), 18296-18306, (2021)
   

Yilmaz G

Msaadi R et al., Highly Selective Copper Ion Imprinted Clay/Polymer Nanocomposites Prepared by Visible Light Initiated Radical Photopolymerization.
Polymers, 11, (2), ArticleNo286-(2019)
   

Yilmaz H

Yilmaz V et al., Selective solid phase extraction of copper using a new Cu(II)-imprinted polymer and determination by inductively coupled plasma optical emission spectroscopy (ICP-OES).
Microchemical Journal, 114, 65-72, (2014)
   

Yilmaz H et al., Development of a molecularly imprinted solid-phase extraction sorbent for the selective extraction of telmisartan from human urine.
Journal of Separation Science, 38, (8), 1433-1439, (2015)
   

Yilmaz H et al., Preconcentration of indapamide from human urine using molecularly imprinted solid-phase extraction.
Journal of Separation Science, 38, (17), 3090-3095, (2015)
   

Gorbani Y et al., Spectrofluorimetric determination of atenolol from human urine using high-affinity molecularly imprinted solid-phase extraction sorbent.
Luminescence, 32, (8), 1391-1397, (2017)
   

Yilmaz V et al., Novel Imprinted Polymer for the Preconcentration of Cadmium with Determination by Inductively Coupled Plasma Mass Spectrometry.
Analytical Letters, 50, (3), 482-499, (2017)
   

Yilmaz V

Yilmaz V et al., Synthesis, characterization and application of a novel ion-imprinted polymer for selective solid phase extraction of copper(II) ions from high salt matrices prior to its determination by FAAS.
Talanta, 116, 322-329, (2013)
   

Yilmaz V et al., Selective solid phase extraction of copper using a new Cu(II)-imprinted polymer and determination by inductively coupled plasma optical emission spectroscopy (ICP-OES).
Microchemical Journal, 114, 65-72, (2014)
   

Yilmaz V et al., Preparation of a new Cu(II)-imprinted polymer and its application for the determination of trace copper in water samples by flame atomic absorption spectrometry.
International Journal of Environmental Analytical Chemistry, 95, (2), 106-120, (2015)
   

Yilmaz V et al., Novel Imprinted Polymer for the Preconcentration of Cadmium with Determination by Inductively Coupled Plasma Mass Spectrometry.
Analytical Letters, 50, (3), 482-499, (2017)
   

Topcu C et al., Electrochemical Determination of Copper(II) in Water Samples Using a Novel Ion-Selective Electrode Based on a Graphite Oxide-Imprinted Polymer Composite.
Analytical Letters, 51, (12), 1890-1910, (2018)
   

Yilmaz Y

Güney O et al., Metal ion templated chemosensor for metal ions based on fluorescence quenching.
Sensors and Actuators B: Chemical, 85, (1-2), 86-89, (2002)
   

Yilmaz Y et al., How the internal structures of the imprinted and the random hydrogels change upon washing?
Journal of Sol-Gel Science and Technology, 80, (1), 77-86, (2016)
   

Yimit A

Aihebaier S et al., Membrane-Protected Molecularly Imprinted Polymer for the Microextraction of Indole-3-butyric Acid in Mung Bean Sprouts.
ACS Omega, 4, (16), 16789-16793, (2019)
   

Yimit O

Muhammad T et al., Rational design of molecularly imprinted polymer: the choice of cross-linker.
Analyst, 137, (11), 2623-2628, (2012)
   

Muhammad T et al., On-line determination of 4-nitrophenol by combining molecularly imprinted solid-phase extraction and fiber-optic spectrophotometry.
Journal of Separation Science, 37, (14), 1873-1879, (2014)
   

Yin C

Yin C et al., Separation and determination of camphor in the essential oil of lavandula angustifolia by magnetic molecularly imprinted polymer extraction/gas chromatography.
Chinese Journal of Analysis Laboratory, 33, (11), 1281-1285, (2014)
   

Li SS et al., Preparation of a multi-hollow magnetic molecularly imprinted polymer for the selective enrichment of indolebutyric acid.
Journal of Separation Science, 38, (15), 2573-2579, (2015)
   

Yang T et al., Dual-template magnetic molecularly imprinted particles with multi-hollow structure for the detection of dicofol and chlorpyrifos-methyl.
Journal of Separation Science, 39, (12), 2388-2395, (2016)
   

Yin DC

Zhou RB et al., A review on recent advances for nucleants and nucleation in protein crystallization.
CrystEngComm, 19, (8), 1143-1155, (2017)
   

Yin DH

Zhu ZK et al., Preparation of Molecularly Imprinted Polymer-Supported Gold Nanoparticles and Their Ability for Specific Substrate Recognition.
Chinese Journal of Catalysis, 32, (9), 1508-1512, (2011)
   

Sun WQ et al., Molecularly imprinted polymer containing Fe(III) catalysts for specific substrate recognition.
Chinese Journal of Catalysis, 34, (8), 1589-1598, (2013)
   

Yin DX

Yin DX et al., Antibody-Imprinted Membrane Adsorber via Two-Step Surface Grafting.
Biomacromolecules, 14, (12), 4489-4496, (2013)
   

Yin DX et al., Protein-selective adsorbers by molecular imprinting via a novel two-step surface grafting method.
Journal of Materials Chemistry B, 1, (25), 3209-3219, (2013)
   

Yin DY

Chen Y et al., Dual-template docking oriented molecular imprinting: a facile strategy for highly efficient imprinting within mesoporous materials.
Chemical Communications, 51, (54), 10929-10932, (2015)
   

Yin DY et al., Surface-enhanced Raman scattering imaging of cancer cells and tissues via sialic acid-imprinted nanotags.
Chemical Communications, 51, (100), 17696-17699, (2015)
   

Liu J et al., Probing Low-Copy-Number Proteins in a Single Living Cell.
Angewandte Chemie International Edition, 55, (42), 13215-13218, (2016)
   

Tu XY et al., Molecularly Imprinted Polymer-Based Plasmonic Immunosandwich Assay for Fast and Ultrasensitive Determination of Trace Glycoproteins in Complex Samples.
Analytical Chemistry, 88, (24), 12363-12370, (2016)
   

Wang SS et al., Targeting and Imaging of Cancer Cells via Monosaccharide-Imprinted Fluorescent Nanoparticles.
Scientific Reports, 6, ArticleNo22757-(2016)
   

Yin DY et al., Targeted cancer imaging and photothermal therapy via monosaccharide-imprinted gold nanorods.
Chemical Communications, 53, (50), 6716-6719, (2017)
   

Yin F

Peng H et al., Characterization of electrosynthesized poly(o-aminophenol) as a molecular imprinting material for sensor preparation by means of quartz crystal impedance analysis.
Analytical Letters, 35, (3), 435-450, (2002)
   

Yin F et al., Construction and analytical application of a novel ion-selective capacitive sensor for determination of cinchonine.
Analytical Letters, 37, (15), 3129-3147, (2004)
   

Yin F, Capacitive sensors using electropolymerized o-phenylenediamine film doped with ion-pair complex as selective elements for the determination of pentoxyverine.
Talanta, 63, (3), 641-646, (2004)
   

Duan GW et al., The preparation of Fe3O4/molecular-imprinted nanocomposite and the application on the recognition and separation of glyphosate.
Inorganic and Nano-Metal Chemistry, 47, (4), 481-487, (2017)
   

Yin FQ

Yin FQ et al., Synthesis and evaluation of mesoporous silica/mesoporous molecularly imprinted nanoparticles as adsorbents for detection and selective removal of imidacloprid in food samples.
Food Chemistry, 364, Article130216-(2021)
   

Yin GF

Fan MX et al., Molecularly imprinted polymer coated Mn-doped ZnS quantum dots embedded in a metal-organic framework as a probe for selective room temperature phosphorescence detection of chlorpyrifos.
RSC Advances, 11, (45), 27845-27854, (2021)
   

Yin GH

Li SH et al., Selective detection of fenaminosulf via a molecularly imprinted fluorescence switch and silver nano-film amplification.
Biosensors and Bioelectronics, 71, 342-347, (2015)
   

Li SH et al., Selective determination of dimethoate via fluorescence resonance energy transfer between carbon dots and a dye-doped molecularly imprinted polymer.
Sensors and Actuators B: Chemical, 206, 14-21, (2015)
   

Li SH et al., Supramolecular imprinted sensor for carbofuran detection based on a functionalized multiwalled carbon nanotube-supported Pd-Ir composite and methylene blue as catalyst.
Electrochimica Acta, 188, 294-300, (2016)
   

Li SH et al., Supramolecular imprinted electrochemical sensor for the neonicotinoid insecticide imidacloprid based on double amplification by Pt-In catalytic nanoparticles and a Bromophenol blue doped molecularly imprinted film.
Microchimica Acta, 183, (12), 3101-3109, (2016)
   

Li SH et al., Aptamer-molecularly imprinted sensor base on electrogenerated chemiluminescence energy transfer for detection of lincomycin.
Biosensors and Bioelectronics, 91, 687-691, (2017)
   

Li SH et al., Molecularly imprinted electroluminescence switch sensor with a dual recognition effect for determination of ultra-trace levels of cobalt (II).
Biosensors and Bioelectronics, 139, Article111321-(2019)
   

Li SH et al., Novel chloramphenicol sensor based on aggregation-induced electrochemiluminescence and nanozyme amplification.
Biosensors and Bioelectronics, 176, Article112944-(2021)
   

Yin GW

Zheng XF et al., Preparation and characterization of temperature-memory nanoparticles of MIP-CS-g-PMMA.
RSC Advances, 6, (112), 110722-110732, (2016)
   

Yin H

Gao WH et al., Synthesis and Adsorption Property of Bitertanol Molecularly Imprinted Polymer.
Modern Food Science and Technology, 29, (8), 1761-1769, (2013)
   

Yao W et al., Polyacrylamide gel beads for the recognition of staphylococcal enterotoxin B.
Polymers for Advanced Technologies, 25, (8), 900-904, (2014)
   

Yin HD

Lu ZW et al., Novel dual-template molecular imprinted electrochemical sensor for simultaneous detection of CA and TPH based on peanut twin-like NiFe2O4/CoFe2O4/NCDs nanospheres: Fabrication, application and DFT theoretical study.
Biosensors and Bioelectronics, 190, Article113408-(2021)
   

Yin HQ

Yang WM et al., Synthesis and characterization of an innovative molecular imprinted polymers based on CdTe QDs fluorescence sensing for selective detection of sulfadimidine.
Journal of Polymer Research, 28, (9), Article356-(2021)
   

Yin HS

Ma YF et al., Electrochemical synthesis of L-tryotophan molecular imprinting film sensor and its application.
Journal of Shandong Agricultural University (Natural Science), 40, (2), 254-258, (2009)
   

Ma YF et al., Determination of atrazine in soil sample based on molecularly imprinted film electrochemical sensors.
Chemical Research and Application, 21, (5), 624-629, (2009)
   

Yin HZ

Shi XJ et al., A Biomimetic Sensor with Signal Enhancement of Ferriferrous Oxide-Reduced Graphene Oxide Nanocomposites for Ultratrace Levels Quantification of Methamidophos or Omethoate in Vegetables.
Food Analytical Methods, 10, (4), 910-920, (2017)
   

Yin J

Tan YG et al., A study of a new TSM bio-mimetic sensor using a molecularly imprinted polymer coating and its application for the determination of nicotine in human serum and urine.
Bioelectrochemistry, 53, (2), 141-148, (2001)
   

Yang YJ et al., Molecularly Imprinted Solid-Phase Extraction for Selective Extraction of Bisphenol Analogues in Beverages and Canned Food.
Journal of Agricultural and Food Chemistry, 62, (46), 11130-11137, (2014)
   

Gan Q et al., Two-Dimensional Ion-Imprinted Silica for Selective Uranium Extraction from Low-Level Radioactive Effluents.
ACS Sustainable Chemistry & Engineering, 9, (23), 7973-7981, (2021)
   

Zhou L et al., Dual Ion-Imprinted Mesoporous Silica for Selective Adsorption of U(VI) and Cs(I) through Multiple Interactions.
ACS Applied Materials & Interfaces, 13, (5), 6322-6330, (2021)
   

Yin JF

Yang GL et al., Chiral separation of nateglinide and its (L) enantiomer on a molecularly imprinted polymer-based stationary phase.
Chromatographia, 59, (11-12), 705-708, (2004)
   

Yin JF et al., Molecular recognition in in-situ nateglinide imprinted chiral stationary phase.
Acta Chimica Sinica, 62, (19), 1922-1926, (2004)
   

Yin JF et al., Rapid and efficient chiral separation of nateglinide and its l-enantiomer on monolithic molecularly imprinted polymers.
Journal of Chromatography A, 1090, (1-2), 68-75, (2005)
   

Yin JF et al., Molecularly imprinted solid-phase extraction for rapid screening of mycophenolic acid in human plasma.
Journal of Chromatography B, 844, (1), 142-147, (2006)
   

Yin JF et al., Pseudo-template molecularly imprinted polymer for selective screening of trace [beta]-lactam antibiotics in river and tap water.
Journal of Chromatography A, 1217, (33), 5420-5426, (2010)
   

Yin JF et al., Molecularly imprinted nanotubes for enantioselective drug delivery and controlled release.
Chemical Communications, 46, (41), 7688-7690, (2010)
   

Yin JF et al., Dummy molecularly imprinted polymer for selective screening of trace bisphenols in river water.
Analytical Methods, 3, (1), 173-180, (2011)
   

Liu B et al., Dopamine molecularly imprinted electrochemical sensor based on graphene - chitosan composite.
Electrochimica Acta, 75, (1), 108-114, (2012)
   

Yin JF et al., Highly Selective Determination of Uric Acid in Human Serum by Molecularly Imprinted Electrochemical Sensor.
Journal of Huaqiao University (Natural Science), 33, (1), 33-38, (2012)
   

Yin JF et al., Plastic antibody for DNA damage: fluorescent imaging of BPDE-dG adducts in genomic DNA.
Analyst, 138, (17), 4958-4966, (2013)
   

Yuan YN et al., Selective extraction and detection of [beta]-agonists in swine urine for monitoring illegal use in livestock breeding.
Food Chemistry, 313, Article126155-(2020)
   

Yin JG

Li XY et al., Synthesis of molecularly imprinted polymer adsorbents for solid-phase extraction of strobilurin fungicides from agricultural products.
Journal of Separation Science, 43, (11), 2133-2141, (2020)
   

Zhang Z et al., Synthesis of dummy-template molecularly imprinted polymer adsorbents for solid phase extraction of aminoglycosides antibiotics from environmental water samples.
Talanta, 208, Article120385-(2020)
   

Cao XL et al., Preparation of Magnetic Dummy Template Molecularly Imprinted Polymers for the Determination of Aminoglycosides Antibiotics in Milk.
Food Analytical Methods, 14, (10), 2111-2120, (2021)
   

Yin JJ

Ji YS et al., Preparation of magnetic molecularly imprinted polymer for rapid determination of bisphenol A in environmental water and milk samples.
Analytical and Bioanalytical Chemistry, 395, (4), 1125-1133, (2009)
   

Yin JX

Xu D et al., Rational design of molecularly imprinted photonic films assisted by chemometrics.
Journal of Materials Chemistry, 22, (32), 16572-16581, (2012)
   

Yin KL

Wang CL et al., Preparation and molecular recognition of D-p-hydroxyphenylglycine imprinted polymer.
Journal of Chemical Industry and Engineering (China), 60, (4), 923-928, (2009)
   

Yin L

Xue M et al., Determination of trichlorfon in samples of spicy vegetables using a molecularly imprinted solid-phase extraction technique.
Analytical Methods, 7, (6), 2420-2424, (2015)
   

Yin LH

Cao JL et al., Research progress on rapid detection methods of mycotoxins.
Chinese Journal of Pharmaceutical Analysis, 33, (1), 159-164, (2013)
   

Cao JL et al., Molecularly imprinted polymer-based solid phase clean-up for analysis of ochratoxin A in beer, red wine, and grape juice.
Journal of Separation Science, 36, (7), 1291-1297, (2013)
   

Wang X et al., Molecular imprinted photonic crystal hydrogels for the rapid and label-free detection of imidacloprid.
Food Chemistry, 141, (4), 3947-3953, (2013)
   

Yin LY

Gao J et al., Lipase Immobilization through the Combination of Bioimprinting and Cross-Linked Protein-Coated Microcrystal Technology for Biodiesel Production.
Industrial & Engineering Chemistry Research, 55, (42), 11037-11043, (2016)
   

Yin M

Yan Y et al., Imprinted photonic hydrogel pillar for self-reporting water treatment of heavy metal ions.
RSC Advances, 5, (118), 97604-97610, (2015)
   

Xie WY et al., Specific purification of a single protein from a cell broth mixture using molecularly imprinted membranes for the biopharmaceutical industry.
RSC Advances, 9, (41), 23425-23434, (2019)
   

Yin MN

Wang DD et al., Magnetic molecularly imprinted polymer for the selective extraction of hesperetin from the dried pericarp of Citrus reticulata Blanco.
Talanta, 184, 307-315, (2018)
   

Yin MT

Zhao DY et al., Molecularly imprinted photoelectrochemical sensing based on ZnO/polypyrrole nanocomposites for acrylamide detection.
Biosensors and Bioelectronics, 173, Article112816-(2021)
   

Yin N

Yin N et al., Carbon Nanotube Facilitated Interface Formation for Enhanced Protein Sensing in Electrosynthesized Molecular Imprinting.
ACS Applied Bio Materials, 2, (10), 4604-4611, (2019)
   

Yin NN

Jing YJ et al., Pb(II)-imprinted chitosan beads to enhance the adsorption property and selectivity: characterization, kinetics, and thermodynamics.
Desalination and Water Treatment, 57, (32), 15073-15082, (2016)
   

Yu XQ et al., The effective and selective separation of (-)-epigallocatechin gallate by molecularly imprinted chitosan beads.
Journal of Food Science and Technology, 54, (3), 770-777, (2017)
   

Yin P

Tian C et al., DNA Nanostructures-Mediated Molecular Imprinting Lithography.
ACS Nano, 11, (1), 227-238, (2017)
   

Yin R

Jenkins AL et al., Molecularly imprinted polymer sensors for pesticide and insecticide detection in water.
Analyst, 126, (6), 798-802, (2001)
   

Jenkins AL et al., Molecularly imprinted polymers for the detection of chemical agents in water.
Abstracts of Papers of the American Chemical Society, 221, (MSE), 42-42, (2001)
   

Jenkins AL et al., Book chapter, Molecularly Imprinted Polymers for the Detection of Chemical Agents in Water, 
In: Defense Applications of Nanomaterials, Miziolek AW, Karna SP, Mauro JM, Vaia RA (Eds.) American Chemical Society: Washington, DC, Ch. 5, 63-80, (2005)
   

Yin R et al., Extraction of matrine from soil with matrix solid-phase dispersion by molecularly imprinted polymers derived from lignin-based Pickering emulsions.
Journal of Separation Science, 42, (23), 3563-3570, (2019)
   

Yin R et al., Preparation of porous carbon-based molecularly imprinted polymers for separation of triazine herbicides in corn.
Microchimica Acta, 189, (1), Article23-(2021)
   

Yin RH

Yuan J et al., Probing the molecular basis for sulfonamides recognition in surface molecularly imprinted polymers using computational and experimental approaches.
Reactive and Functional Polymers, 170, Article105105-(2022)
   

Yin RL

Jia H et al., Anti-diabetic Drugs Detection by Raman Spectrometry with Molecular Imprinted Composite Membrane.
Chemical Journal of Chinese Universities, 37, (2), 239-245, (2016)
   

Yin S

Zhao ZH et al., Preparation and Properties of Phenol Imprinted Polymers Based on Silica Modified Multi-Walled Carbon Nanotubes.
Journal of Nanoscience and Nanotechnology, 17, (2), 1504-1509, (2017)
   

Yin SJ

Wang JY et al., Binding constant and transport property of S-Naproxen molecularly imprinted composite membrane.
Journal of Membrane Science, 331, (1-2), 84-90, (2009)
   

Yin TJ

Wang TT et al., An all-solid-state imprinted polymer-based potentiometric sensor for determination of bisphenol S.
RSC Advances, 6, (77), 73308-73312, (2016)
   

Yin W

Fa HB et al., Study on Synthesis and properties of Molecularly Imprinted Polymeric Microspheres of Metalloporphyrins with Dimethyl Methylphosphonate as template molecule.
Chemical Journal of Chinese Universities, 34, (5), 1160-1165, (2013)
   

Fa HB et al., Molecularly imprinted polymeric microspheres with metalloporphyrin-based molecular recognition sites coassembled with methacrylic acid.
High Performance Polymers, 25, (7), 790-797, (2013)
   

Yang DD et al., Synthesis and Characterization of a Molecularly Imprinted Polymer for Preconcentration of Clothianidin in Environmental Samples.
Analytical Letters, 47, (15), 2613-2627, (2014)
   

Zhang Y et al., A dual read-out molecularly imprinted composite membrane sensor based on zinc porphyrin for the detection of dimethyl methylphosphonate.
Chemical Research in Chinese Universities, 32, (5), 725-730, (2016)
   

Zang YJ et al., Fabrication of S-MoSe2/NSG/Au/MIPs imprinted composites for electrochemical detection of dopamine based on synergistic effect.
Microchemical Journal, 156, Article104845-(2020)
   

Yin WL

Li JP et al., A strategy for improving the sensitivity of molecularly imprinted electrochemical sensors based on catalytic copper deposition.
Analytica Chimica Acta, 817, 17-22, (2014)
   

Li JP et al., A sensitive electrochemical molecularly imprinted sensor based on catalytic amplification by silver nanoparticles for 3-indoleacetic acid determination.
Sensors and Actuators B: Chemical, 197, 109-115, (2014)
   

Li X et al., Clopyralid detection by using a molecularly imprinted electrochemical luminescence sensor based on the "gate-controlled" effect.
Journal of Solid State Electrochemistry, 18, (7), 1815-1822, (2014)
   

Yin WM

Yin WM et al., Surface-imprinted SiO2@Ag nanoparticles for the selective detection of BPA using surface enhanced Raman scattering.
Sensors and Actuators B: Chemical, 258, 566-573, (2018)
   

Zhu YY et al., Enzyme induced molecularly imprinted polymer on SERS substrate for ultrasensitive detection of patulin.
Analytica Chimica Acta, 1101, 111-119, (2020)
   

Yin WX

Ye T et al., Colorimetric detection of pyrethroid metabolite by using surface molecularly imprinted polymer.
Sensors and Actuators B: Chemical, 254, 417-423, (2018)
   

Yin WY

Gao Y et al., Synthesis of rice husk-based ion-imprinted polymer for selective capturing Cu(II) from aqueous solution and re-use of its waste material in Glaser coupling reaction.
Journal of Hazardous Materials, 424, Article127203-(2022)
   

Yin X

Guo M et al., Synthesis and characterization of the molecularly imprinted polymer of ethyl carbamate and the exploration of molecular recognition properties.
Journal of Chinese Institute of Food Science and Technology, 14, (3), 55-63, (2014)
   

Yin XC

Long J et al., An ion-imprinted polymer based on the novel functional monomer for selective removal of Ni(II) from aqueous solution.
Journal of Environmental Chemical Engineering, 4, (4, Part A), 4776-4785, (2016)
   

Luo XB et al., Capturing Cadmium(II) Ion from Wastewater Containing Solid Particles and Floccules Using Ion-Imprinted Polymers with Broom Effect.
Industrial & Engineering Chemistry Research, 56, (9), 2350-2358, (2017)
   

Yin XC et al., Recovery of Silver from Wastewater Using a New Magnetic Photocatalytic Ion-Imprinted Polymer.
ACS Sustainable Chemistry & Engineering, 5, (3), 2090-2097, (2017)
   

Yin XF

Li Y et al., Synthesis of magnetic molecularly imprinted polymer nanowires using a nanoporous alumina template.
Macromolecules, 39, (13), 4497-4499, (2006)
   

Wang HJ et al., Template Synthesized Molecularly Imprinted Polymer Nanotube Membranes for Chemical Separations.
Journal of the American Chemical Society, 128, (50), 15954-15955, (2006)
   

Su J et al., Molecular imprinted polymer(MIP)and its application.
Journal of Shandong University of Technology (Natural Science Edition), 22, (6), 90-95, (2008)
   

Yin XF et al., Discovery of Active Component of Alkaloid From Marine Microorgamism Using Molecularly Imprinted Technique.
Advances in Marine Science, 26, (2), 228-233, (2008)
   

Zhou WH et al., Preparation of molecularly imprinted polymer nano-films by controlled/living radical polymerization.
Journal of Fuzhou University (Natural Science Edition), 36, (2), 284-287, (2008)
   

Yi N et al., Research Progress of Sensor Based Molecularly imprinted polymers.
Development and Application of Materials, (1), 117-124, (2013)
   

Zhang XL et al., A facile approach for preparation of molecularly imprinted polymers layer on the surface of carbon nanotubes.
Talanta, 105, 403-408, (2013)
   

Xu WZ et al., Photo-stimulated "turn-on/off" molecularly imprinted polymers based on magnetic mesoporous silicon surface for efficient detection of sulfamerazine.
Journal of Separation Science, 43, (13), 2550-2557, (2020)
   

Zhang YY et al., Computer-aided design and synthesis of molecular imprinting polymers based on doubly oriented functional multiwalled carbon nanotubes for electrochemically sensing bisphenol A.
Reactive and Functional Polymers, 157, Article104767-(2020)
   

Huang WH et al., Photoresponsive molecularly imprinted polymers based on 4-[(4-methacryloyloxy)phenylazo] benzenesulfonic acid for the determination of sulfamethazine.
Journal of Separation Science, 44, (13), 2536-2544, (2021)
   

Huang WH et al., Selective enrichment-release of trace dibutyl phthalate via molecular-imprinting based photo-controlled switching followed by high-performance liquid chromatography analysis.
Journal of Separation Science, 44, (2), 513-520, (2021)
   

Xu WZ et al., Highly sensitive electrochemical BPA sensor based on titanium nitride-reduced graphene oxide composite and core-shell molecular imprinting particles.
Analytical and Bioanalytical Chemistry, 413, (4), 1081-1090, (2021)
   

Yin XJ

Yin XJ et al., Studies on preparation and performances of analogue of ethinylestradiol molecularly imprinted polymers.
Chemical Research and Application, 22, (1), 73-77, (2010)
   

Yin XL

Zhu HJ et al., Magnetic nanoparticles combining teamed boronate affinity and surface imprinting for efficient selective recognition of glycoproteins under physiological pH.
Chemical Engineering Journal, 346, 317-328, (2018)
   

Yin XQ

Li ZM et al., Metal-ion-imprinted thermo-responsive materials obtained from bacterial cellulose: synthesis, characterization, and adsorption evaluation.
Journal of Materials Chemistry A, 7, (19), 11742-11755, (2019)
   

Yin XX

Guo M et al., Preparation and Properties Characterization of Intelligent Molecularly Imprinted Polymer Based on Diles-Alder Reaction.
Chemical Journal of Chinese Universities, 39, (3), 566-574, (2018)
   

Yin XY

Yin XY et al., The Spectroscopy Analysis of Intermolecular Interaction Between the Template Molecule and Functional Monomer Before Polymerization.
Spectroscopy and Spectral Analysis, 30, (8), 2211-2214, (2010)
   

Yin XY et al., Proceeding, Preparation and recognition properties of andrographolide molecularly imprinted ploymer microspheres, 
Zhang GJ, Xu J (Eds.), 777-782, (2010)
   

Yin XY et al., Proceeding, The Effect on Adsorption Performance of Molecularly Imprinted Polymer Using the Different Functional Monomers, 
Bu JL, Wang PC, Ai LQ, Sang XM, Li YG (Eds.), 334-337, (2011)
   

Yin XY et al., Development of andrographolide molecularly imprinted polymer for solid-phase extraction.
Spectrochimica Acta Part A-Molecular and Biomolecular Spctroscopy, 79, (1), 191-196, (2011)
   

Jiang YF et al., Study on targeted separation of atractylenolide IQ from traditional Chinese herbs by molecularly imprinted solid phase extraction.
Chinese Pharmaceutical Journal, 47, (13), 1077-1080, (2012)
   

Yi LN et al., Application of molecularly imprinting technology in efficient separation of active components from Traditional Chinese herb.
Journal of International Pharmaceutical Research, 39, (4), 307-310, (2012)
   

Yi LN et al., Proceeding, Preparation and Properties of Ginsenoside Rg1 Molecularly Imprinted Polymers, 
Liu ZL, Peng F, Liu XG (Eds.), 1715-1718, (2012)
   

Yin XY et al., Determination of hyperoside and isoquercitrin in rat plasma by membrane-protected micro-solid-phase extraction with high-performance liquid chromatography.
Journal of Separation Science, 35, (3), 384-391, (2012)
   

Liu QS et al., Proceeding, A Novel Method for Prepairing Higher Performance Picroside I Surface Molecularly Imprinted Polymers for TCM Research, 
Yu L, Guo WP, Sun M, He J (Eds.), 642-645, (2013)
   

Liu QS et al., Comparative study on two polymerization methods for preparing ginsenoside Rg1 molecularly imprinted polymer separating materials.
China Journal of Chinese Materia Medica, 38, (24), 4287-4291, (2013)
   

Liu QS et al., Proceeding, Molecularly Imprinted Solid-Phase Extraction: Extraction of Traditional Chinese Medicine Active Ingredients, 
Hegde G (Ed.), 311-313, (2014)
   

Yin XY et al., Correlation study between molecular structure of sesquiterpene lactones and the selective adsorption performance of molecularly imprinted polymers.
Journal of Chromatography A, 1354, 9-17, (2014)
   

Liu QS et al., Book chapter, The application of MITs on active ingredients extraction and separation from TCM, 
In: Advances in Energy Equipment Science and Engineering, Zhou SQ, Patty A, Chen SM (Eds.) CRC Press: London, Ch. 47, 241-244, (2015)
   

Liu QS et al., Innovative method for the enrichment of high-polarity bioactive molecules present at low concentrations in complex matrices.
Journal of Separation Science, 40, (3), 744-752, (2017)
   

Liu QS et al., Novel Beta-Tubulin-Immobilized Nanoparticles Affinity Material for Screening [beta]-Tubulin Inhibitors from a Complex Mixture.
ACS Applied Materials & Interfaces, 9, (7), 5725-5732, (2017)
   

Liang XY et al., Facile synthesis of molecularly imprinted polymers for selective extraction of tyrosine metabolites in human urine.
Journal of Chromatography A, 1587, 34-41, (2019)
   

Sun Y et al., Preparation and evaluation of photo-responsive hollow SnO2 molecularly imprinted polymers for the selective recognition of kaempferol.
Analytical Methods, 13, (7), 925-932, (2021)
   

Yin XZ

Huang X et al., Book chapter, Nanoenzymes as Selenoprotein Mimics, 
In: Selenoproteins and Mimics, Liu JQ, Luo GM, Mu Y (Eds.) Springer: Berlin Heidelberg, Ch. 19, 289-302, (2012)
   

Yin Y

Chi ZF et al., Selective Recycle of Cd(0) Based on pH/T Switchable Controlled Cd(II) Adsorption on Ion-Imprinted Polymer.
Fresenius Environmental Bulletin, 28, (10), 7449-7460, (2019)
   

Yin YF

Yin YF et al., Synthesis and Characterization of Emodin Molecularly Imprinted Monolithic Column.
Journal of Instrumental Analysis, 27, (7), 758-761, (2008)
   

Yin YF et al., The Synthesis and Characterization of Metsulforon Methyl Imprinted Polymers with High Binding Capacity.
Journal of Analytical Science, 25, (4), 414-418, (2009)
   

Yin YG

Zhu QH et al., Synthesis of molecularly imprinted polymers for the application of selective clean-up vinblastine from Catharanthus roseus extract.
SCIENCE CHINA Chemistry, 53, (12), 2587-2592, (2010)
   

Li M et al., Preparation and evaluation of biodegradable molecularly imprinted polymers.
Chinese Journal of Tissue Engineering Research, 17, (38), 6817-6824, (2013)
   

Li MT et al., Molecularly imprinted polymers on a silica surface for the adsorption of tobacco-specific nitrosamines in mainstream cigarette smoke.
Journal of Separation Science, 38, (14), 2551-2557, (2015)
   

Yin YJ

Zhang LY et al., Molecule selecting property of cimetidine imprinted polymeric microspheres via suspension polymerization.
Chinese Journal of Analytical Chemistry, 31, (6), 655-658, (2003)
   

Gan MY et al., Molecularly imprinted polymers derived from lignin-based Pickering emulsions and their selectively adsorption of lambda-cyhalothrin.
Chemical Engineering Journal, 257, 317-327, (2014)
   

Pan JM et al., Thermoresponsive and magnetic molecularly imprinted polymers based on iron oxide encapsulated carbon nanotubes as a matrix for the selective adsorption and controlled release of 2, 4, 5-trichlorophenol.
Journal of Applied Polymer Science, 132, (27), ArticleNo42087-(2015)
   

Pan JM et al., Fabrication and evaluation of molecularly imprinted multi-hollow microspheres adsorbents with tunable inner pore structures derived from templating Pickering double emulsions.
Chemical Engineering Journal, 266, 299-308, (2015)
   

Wang JX et al., Thermo-responsive and magnetic molecularly imprinted Fe3O4@carbon nanospheres for selective adsorption and controlled release of 2, 4, 5-trichlorophenol.
Journal of Industrial and Engineering Chemistry, 25, 321-328, (2015)
   

Pan JM et al., Hierarchical porous molecule/ion imprinted polymers with double specific binding sites: Combination of Pickering HIPEs template and pore-filled strategy.
Chemical Engineering Journal, 301, 210-221, (2016)
   

Yin YJ et al., Rationally designed hybrid molecularly imprinted polymer foam for highly efficient [lambda]-cyhalothrin recognition and uptake via twice imprinting strategy.
Chemical Engineering Journal, 286, 485-496, (2016)
   

Yin YK

Wang P et al., Preparation of bovine hemoglobin surface molecularly imprinted cotton for selective protein recognition.
Process Biochemistry, 88, 31-37, (2020)
   

Yin YL

Cai R et al., An imprinted electrochemical sensor for bisphenol A determination based on electrodeposition of a graphene and Ag nanoparticle modified carbon electrode.
Analytical Methods, 6, (5), 1590-1597, (2014)
   

Rao W et al., Magnetic dummy molecularly imprinted polymers based on multi-walled carbon nanotubes for rapid selective solid-phase extraction of 4-nonylphenol in aqueous samples.
Talanta, 128, 170-176, (2014)
   

Rao W et al., Fast separation and determination of erythromycin with magnetic imprinted solid extraction coupled with high performance liquid chromatography.
RSC Advances, 4, (36), 18503-18511, (2014)
   

Rao W et al., Preparation and Application of Magnetic Bisphenol A Imprinted Polymers with Binary Functional Monomers.
Chemical Journal of Chinese Universities, 36, (3), 449-455, (2015)
   

Yin YL et al., Magnetic molecularly imprinted polydopamine nanolayer on multiwalled carbon nanotubes surface for protein capture.
Talanta, 144, 671-679, (2015)
   

Zhang ZH et al., Preparation of novel curcumin-imprinted polymers based on magnetic multi-walled carbon nanotubes for the rapid extraction of curcumin from ginger powder and kiwi fruit root.
Journal of Separation Science, 38, (1), 108-114, (2015)
   

Yan L et al., Synthesis and Application of Novel 3D Magnetic Chlorogenic Acid Imprinted Polymers Based on a Graphene-Carbon Nanotube Composite.
Journal of Agricultural and Food Chemistry, 64, (15), 3091-3100, (2016)
   

Yin YL et al., Polydopamine-coated magnetic molecularly imprinted polymer for the selective solid-phase extraction of cinnamic acid, ferulic acid and caffeic acid from radix scrophulariae sample.
Journal of Separation Science, 39, (8), 1480-1488, (2016)
   

Yin YL et al., Magnetic Molecularly Imprinted Polymer Preconcentration of 4-Chlorophenol with Determination by High-Performance Liquid Chromatography.
Analytical Letters, 50, (1), 117-134, (2017)
   

Yin YM

Chen YP et al., Quantum Dots Capped with Dummy Molecularly Imprinted Film as Luminescent Sensor for the Determination of Tetrabromobisphenol A in Water and Soils.
Journal of Agricultural and Food Chemistry, 60, (42), 10472-10479, (2012)
   

Yin YM et al., Dummy molecularly imprinted polymers on silica particles for selective solid-phase extraction of tetrabromobisphenol A from water samples.
Journal of Chromatography A, 1220, (1), 7-13, (2012)
   

Yin YN

Pu D et al., Synthesis of glycylglycine imprinted polymer microspheres via emulsion polymerization.
The Chinese Journal of Process Engineering, 11, (4), 671-677, (2011)
   

Yin YN et al., Study on Adsorption Properties of Glycylglycine Molecular Imprinted Polymer Microspheres.
Chemistry Bulletin, 75, (1), 58-62, (2012)
   

Song RY et al., Preparation and properties of molecularly imprinted polymer microspheres for erythromycin.
Ion Exchange and Adsorption, 29, (2), 97-107, (2013)
   

Yin YW

Liang QW et al., Fast and selective removal of Cr(VI) from aqueous solutions by a novel magnetic Cr(VI) ion-imprinted polymer.
Journal of Molecular Liquids, 248, 767-774, (2017)
   

Yin YX

Kan XW et al., The Preparation and Applications of Molecularly Imprinted Polymers Based on Silica Materials.
Progress In Chemistry, 22, (1), 107-112, (2010)
   

Yin YZ

Huang X et al., Incorporation of glutathione peroxidase active site into polymer based on imprinting strategy.
Biosensors and Bioelectronics, 25, (3), 657-660, (2009)
   

Huang X et al., Design of Artificial Selenoenzymes Based on Macromolecular Scaffolds.
Macromolecular Bioscience, 10, (12), 1385-1396, (2010)
   

Dong ZY et al., Supramolecular enzyme mimics by self-assembly.
Current Opinion in Colloid & Interface Science, 16, (6), 451-458, (2011)
   

Yin YZ et al., Biomimetic catalysts designed on macromolecular scaffolds.
Progress in Polymer Science, 37, (11), 1476-1509, (2012)
   

Yin ZF

Wu WA et al., Study and application of mitoxantrone sensor based on molecular imprinting.
Chemical Journal of Chinese Universities, 29, (7), 1334-1338, (2008)
   

Liu R et al., Fabrication and Application of Chlorpromazine Molecular Imprinting Film Sensor.
Chinese Journal of Applied Chemistry, 30, (11), 1361-1365, (2013)
   

Yin ZH

Yin ZH et al., Synthesis and characterization of 2, 4-dichlorophenoxyacetic acid molecularly imprinted monolithic column and its chromatographic property.
Journal of Instrumental Analysis, 28, (8), 949-953, (2009)
   

Yin ZM

Fan WG et al., Functional organic material for roxarsone and its derivatives recognition via molecular imprinting.
Journal of Molecular Recognition, 31, (3), ArticleNoe2625-(2018)
   

Yin ZQ

Xu WZ et al., Acetylene black paste electrode modified with molecularly imprinted polymers/graphene for the determination of bisphenol A.
Journal of Separation Science, 39, (24), 4851-4857, (2016)
   

Yin ZZ

Huang J et al., Molecularly imprinted polymer coating with fluorescence on magnetic particle.
Macromolecular Research, 21, (9), 1021-1028, (2013)
   

Wang DD et al., Preparation of A Sensor Based on Graphene Modified Electrode and Molecularly Imprinted Polymers and Its Determination on Dopamine.
Journal of Instrumental Analysis, 32, (5), 581-585, (2013)
   

Chen ZD et al., Determination of Bisphenol A Using an Electrochemical Sensor Based on a Molecularly Imprinted Polymer-Modified Multiwalled Carbon Nanotube Paste Electrode.
Analytical Letters, 47, (6), 996-1014, (2014)
   

Zhai YY et al., Electrochemical Molecular Imprinted Sensors Based on Electrospun Nanofiber and Determination of Ascorbic Acid.
Analytical Sciences, 31, (8), 793-798, (2015)
   

Li QS et al., G-Quadruplex DNA with an Apurinic Site as a Soft Molecularly Imprinted Sensing Platform.
Analytical Chemistry, 90, (9), 5552-5556, (2018)
   

Liu LY et al., An Electrochemical Sensor for Diphenylamine Detection Based on Reduced Graphene Oxide/Fe3O4-Molecularly Imprinted Polymer with 1, 4-Butanediyl-3, 3'-bis-l-vinylimidazolium Dihexafluorophosphate Ionic Liquid as Cross-Linker.
Polymers, 10, (12), Article1329-(2018)
   

Yin ZZ et al., Highly sensitive and selective sensor for sunset yellow based on molecularly imprinted polydopamine-coated multi-walled carbon nanotubes.
Biosensors and Bioelectronics, 100, 565-570, (2018)
   

Zhang ZL et al., Preparation of molecularly imprinted ordered mesoporous silica for rapid and selective separation of trace bisphenol A from water samples.
Applied Surface Science, 448, 380-388, (2018)
   

Ying HJ

Chang YH et al., Solid-phase extraction sorbent for organosulphur compounds present in fuels made by molecular imprinting.
Ion Exchange and Adsorption, 19, (5), 450-456, (2003)
   

Ying HJ et al., Solid-phase extraction sorbent for orgenosulphur compounds present in fuels by molecular imprinting.
Journal of Nanjing University of Technology (Natural Science Edition), 28, (1), 11-14, (2006)
   

Chang YH et al., Desulfurization of Gasoline using Molecularly Imprinted Chitosan as Selective Adsorbents.
Applied Biochemistry and Biotechnology, 160, (2), 593-603, (2010)
   

Ying HQ

Zhou ZP et al., Synthesis of surface molecular imprinting polymer on SiO2-coated CdTe quantum dots as sensor for selective detection of sulfadimidine.
Applied Surface Science, 404, 188-196, (2017)
   

Ying J

Huo PW et al., Preparation molecular/ions imprinted photocatalysts of La3+@POPD/TiO2/fly-ash cenospheres: Preferential photodegradation of TCs antibiotics.
Chemical Engineering Journal, 198-199, (1), 73-80, (2012)
   

Ying LL

Wang XH et al., Enhancement of selective separation on molecularly imprinted monolith by molecular crowding agent.
Analytical and Bioanalytical Chemistry, 409, (1), 201-211, (2017)
   

Wang XH et al., Green synthesis of water-compatible and thermo-responsive molecularly imprinted nanoparticles.
European Polymer Journal, 92, 174-184, (2017)
   

Ying PC

Huang ZL et al., Molecularly imprinted polymer functionalized reduced graphene oxide: a new platform for the detection of hydroxyl radicals in the atmosphere.
Analytical Methods, 11, (40), 5126-5133, (2019)
   

Ying RJ

Song XL et al., Determination of 16 polycyclic aromatic hydrocarbons in seawater using molecularly imprinted solid-phase extraction coupled with gas chromatography-mass spectrometry.
Talanta, 99, 75-82, (2012)
   

Ying RJ et al., Ion imprinted dual reference ratiometric fluorescence probe for respective and simultaneous detection of Fe3+ and Cu2+.
New Journal of Chemistry, 43, (16), 6404-6410, (2019)
   

Ying TL

Gao MJ et al., Study on 2, 4-D Molecularly Imprinted Polymer.
Analysis and Testing Technology and Instruments, 7, (4), 210-214, (2001)
   

Gao MZ et al., Introduction of molecularly imprinted technology.
Journal of Fuel Chemistry and Technology, 29, (3), 286-288, (2001)
   

Ying TL et al., Highly selective technique-molecular imprinting.
Chinese Journal of Analytical Chemistry, 29, (1), 99-102, (2001)
   

Ying X

Song H et al., An ultrasensitive and selective electrochemical sensor for determination of estrone 3-sulfate sodium salt based on molecularly imprinted polymer modified carbon paste electrode.
Analytical and Bioanalytical Chemistry, 409, (27), 6509-6519, (2017)
   

Ying XF

Lu F et al., Evaluation of the binding specificity of electrosynthesized poly-ortho-phenylenediamine molecularly imprinted with metal chelates.
Microchimica Acta, 174, (1), 47-54, (2011)
   

Ying XG

Zhang FJ et al., Emulsion and macromolecules templated alginate based polymer microspheres.
Reactive and Functional Polymers, 66, (7), 712-719, (2006)
   

Zhao KY et al., Macromolecularly imprinted calcium phosphate/alginate hybrid polymer microspheres with the surface imprinting of bovine serum albumin in inverse-phase suspension.
Journal of Applied Polymer Science, 109, (4), 2687-2693, (2008)
   

Zhao KY et al., Rebinding and recognition properties of protein-macromolecularly imprinted calcium phosphate/alginate hybrid polymer microspheres.
Reactive and Functional Polymers, 68, (3), 732-741, (2008)
   

Ying XG et al., Specific rebinding property of protein macromolecularly imprinted polymer microspheres based on calcium alginate hydrogel via gas jetting-dropping method.
Journal of Applied Polymer Science, 117, (4), 2331-2339, (2010)
   

Ying XG et al., Preparation and characterization of protein imprinted agarose microspheres.
Polymer Bulletin, 65, (3), 245-263, (2010)
   

Ying XG et al., Effect on rebinding behavior with different composition and structure of the dually imprinted alginate polymer microspheres using proteins and o/w emulsion drops as dual templates.
Journal of Applied Polymer Science, 115, (6), 3516-3526, (2010)
   

Ding J et al., Proceeding, Preparation of L-Tryptophan Imprinted Polymer Microspheres in Aqueous Media by In Situ Grafting on Surface, 
Liu SQ, Zuo M (Eds.), 1658-1662, (2011)
   

Ying XG et al., Preparation and Characterization of Protein Imprinted Calcium Alginate Microspheres Modified by Interpenetrating Networks.
Journal of Tianjin University, 44, (2), 134-140, (2011)
   

Ying XG et al., The imprinting induce-fit model of specific rebinding of macromolecularly imprinted polymer microspheres.
Journal of Applied Polymer Science, 122, (3), 1847-1856, (2011)
   

Xu W et al., Preparation and performance of sensing films of molecularly imprinted electrochemical sensor for L-tryptophan.
Chemical Journal of Chinese Universities, 33, (10), 2199-2204, (2012)
   

Zhang WY et al., Preparation and Properties of Ambient Crosslinking Porous Molecularly Imprinted Latex Membranes.
Chinese Journal of Materials Research, 26, (4), 431-436, (2012)
   

Lin MN et al., Preparation and properties of porous L-tryptophan imprinted latex membrane from core-shell emulsion.
Journal of Applied Polymer Science, 127, (3), 2067-2073, (2013)
   

Ying XG et al., Stimuli-responsive recognition of BSA-imprinted poly vinyl acetate grafted calcium alginate core-shell hydrogel microspheres.
Journal of Applied Polymer Science, 127, (5), 3898-3909, (2013)
   

Zhao F et al., An Electrochemical Sensor for L-Tryptophan Using a Molecularly Imprinted Polymer Film Produced by Copolymerization of o-Phenylenediamine and Hydroquinone.
Analytical Letters, 47, (10), 1712-1725, (2014)
   

Li LX et al., Molecularly imprinted polyurethane grafted calcium alginate hydrogel with specific recognition for proteins.
Materials Letters, 143, 248-251, (2015)
   

Li LX et al., Protein-imprinted polyurethane-grafted calcium alginate hydrogel microspheres.
Journal of Applied Polymer Science, 132, (26), ArticleNo42140-(2015)
   

Liu JQ et al., BSA imprinted polyethylene glycol grafted calcium alginate hydrogel microspheres.
Journal of Applied Polymer Science, 133, (36), ArticleNo43617-(2016)
   

Wang HX et al., Specific rebinding of protein imprinted polyethylene glycol grafted calcium alginate hydrogel with different crosslinking degree.
Journal of Polymer Research, 24, (6), ArticleNo93-(2017)
   

Ying XG et al., Molecular imprinting technique in putrescine visualized detection.
Sensors and Actuators B: Chemical, 258, 870-880, (2018)
   

Ying XG et al., Polyacrylamide-grafted calcium alginate microspheres as protein-imprinting materials.
Polymer Bulletin, 75, (5), 2139-2150, (2018)
   

Ying XG et al., Preparation and specific recognition of protein macromolecularly imprinted polyampholyte hydrogel.
Talanta, 192, 14-23, (2019)
   

Ying XG et al., Molecular imprinted electrospun chromogenic membrane for l-tyrosine specific recognition and visualized detection.
Talanta, 204, 647-654, (2019)
   

Ying XG et al., Molecular imprint enhanced specific adsorption visualization on electrospun chromogenic membrane for efficient detection of putrescine.
Journal of Applied Polymer Science, 136, (45), Article48186-(2019)
   

Ying Y

Ma J et al., An overview on molecular imprinted polymers combined with surface-enhanced Raman spectroscopy chemical sensors toward analytical applications.
Talanta, 225, Article122031-(2021)
   

Ying YB

Zhang C et al., A disposable electrochemical sensor based on electrospinning of molecularly imprinted nanohybrid films for highly sensitive determination of the organotin acaricide cyhexatin.
Microchimica Acta, 186, (8), Article504-(2019)
   

Yingyuad P

Dechtrirat D et al., A screen-printed carbon electrode modified with gold nanoparticles, poly(3, 4-ethylenedioxythiophene), poly(styrene sulfonate) and a molecular imprint for voltammetric determination of nitrofurantoin.
Microchimica Acta, 185, (5), ArticleNo261-(2018)
   

Yip WT

Gilliland JW et al., Solvent effect on mobility and photostability of organic dyes embedded inside silica sol-gel thin films.
Chemistry of Materials, 17, (26), 6702-6712, (2005)
   

Yli-Kauhaluoma J

Nilsson SME et al., Enantioselective hyperporous molecularly imprinted thin film polymers.
RSC Advances, 9, (58), 33653-33656, (2019)
   

Yngman S

Ertürk Bergdahl G et al., In Vivo Detection and Absolute Quantification of a Secreted Bacterial Factor from Skin Using Molecularly Imprinted Polymers in a Surface Plasmon Resonance Biosensor for Improved Diagnostic Abilities.
ACS Sensors, 4, (3), 717-725, (2019)
   

Yogo T

Hayashi K et al., Cellulose-based molecularly imprinted red-blood-cell-like microparticles for the selective capture of cortisol.
Carbohydrate Polymers, 193, 173-178, (2018)
   

Yokobayashi Y

McNiven S et al., Enhancing the selectivity of molecularly imprinted polymers.
Chemistry Letters, 26, (12), 1297-1298, (1997)
   

McNiven S et al., Applications of molecularly imprinted polymers to molecules.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 113-113, (1997)
   

Yokobayashi Y et al., Enhancing the selectivity of molecularly imprinted polymers.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 26-26, (1997)
   

McNiven SJ et al., Book chapter, Application of molecular imprinting to the recognition and detection of bioactive materials, 
In: Molecular and Ionic Recognition with Imprinted Polymers, Bartsch RA, Maeda M (Eds.) The American Chemical Society: Washington DC, Ch. 6, 90-108, (1998)
   

Yokota N

Yokota N et al., Fabrication of Bisphenol A Sensor Utilizing Electrode Modified with Molecularly Imprinted Polymer.
ECS Meeting Abstracts, 802, (50), 3118-3118, (2008)
   

Yokota N et al., Fabrication of Bisphenol A Sensor Utilizing Electrode Modified with Molecularly Imprinted Polymer.
ECS Transactions, 16, (11), 551-556, (2008)
   

Kubo I et al., The Establishment of Bisphenol A Sensing System Utilizing Molecularly Imprinted Polymer Receptor and Electrochemical Determination.
International Journal of Electrochemistry, 2011, Article ID 534936-(2011)
   

Kubo I et al., Characteristics of Molecularly Imprinted Polymer Thin Layer for Bisphenol A and Response of the MIP-Modified Sensor.
ISRN Materials Science, 2012, Article ID 861643-(2012)
   

Kubo I et al., Proceeding, Sensing System for Bisphenol A Utilizing a Molecularly Imprinted Polymer Modified Electrode, 
Pei L (Ed.), 922-926, (2012)
   

Yokota S

Stevens MG et al., Preparation of Highly Selective Sorbents Composed of Peptides and Silica Using Novel Molecular Imprinting Technology for Target Metal Ions.
Journal of Chemical Engineering of Japan, 53, (9), 485-493, (2020)
   

Yokoyama K

Matsui J et al., Molecular recognition in continuous polymer rods prepared by a molecular imprinting technique.
Analytical Chemistry, 65, (17), 2223-2224, (1993)
   

Matsui J et al., A molecularly imprinted nicotine-selective polymer.
Analytical Letters, 29, (12), 2071-2078, (1996)
   

Gilliland JW et al., Solvent effect on mobility and photostability of organic dyes embedded inside silica sol-gel thin films.
Chemistry of Materials, 17, (26), 6702-6712, (2005)
   

Yola ML

Gupta VK et al., Molecular imprinted polypyrrole modified glassy carbon electrode for the determination of tobramycin.
Electrochimica Acta, 112, 37-43, (2013)
   

Gupta VK et al., A novel molecular imprinted nanosensor based quartz crystal microbalance for determination of kaempferol.
Sensors and Actuators B: Chemical, 194, 79-85, (2014)
   

Yola ML et al., Determination of amikacin in human plasma by molecular imprinted SPR nanosensor.
Sensors and Actuators B: Chemical, 198, 70-76, (2014)
   

Yola ML et al., Development of molecular imprinted nanosensor for determination of tobramycin in pharmaceuticals and foods.
Talanta, 120, 318-324, (2014)
   

Yola ML et al., Molecularly imprinted electrochemical biosensor based on Fe@Au nanoparticles involved in 2-aminoethanethiol functionalized multi-walled carbon nanotubes for sensitive determination of cefexime in human plasma.
Biosensors and Bioelectronics, 60, 277-285, (2014)
   

Yola ML et al., Molecular imprinted nanosensor based on surface plasmon resonance: Application to the sensitive determination of amoxicillin.
Sensors and Actuators B: Chemical, 195, 28-35, (2014)
   

Atar N et al., A sensitive molecular imprinted surface plasmon resonance nanosensor for selective determination of trace triclosan in wastewater.
Sensors and Actuators B: Chemical, 216, 638-644, (2015)
   

Atar N et al., A molecular imprinted SPR biosensor for sensitive determination of citrinin in red yeast rice.
Food Chemistry, 184, 7-11, (2015)
   

Eren T et al., A sensitive molecularly imprinted polymer based quartz crystal microbalance nanosensor for selective determination of lovastatin in red yeast rice.
Food Chemistry, 185, 430-436, (2015)
   

Gupta VK et al., Selective QCM sensor based on atrazine imprinted polymer: Its application to wastewater sample.
Sensors and Actuators B: Chemical, 218, 215-221, (2015)
   

Yola ML et al., A sensitive molecular imprinted electrochemical sensor based on gold nanoparticles decorated graphene oxide: Application to selective determination of tyrosine in milk.
Sensors and Actuators B: Chemical, 210, 149-157, (2015)
   

Yola ML et al., Sensitive and selective determination of aqueous triclosan based on gold nanoparticles on polyoxometalate/reduced graphene oxide nanohybrid.
RSC Advances, 5, (81), 65953-65962, (2015)
   

Yola ML et al., Correction: Sensitive and selective determination of aqueous triclosan based on gold nanoparticles on polyoxometalate/reduced graphene oxide nanohybrid.
RSC Advances, 5, (89), 72590-72591, (2015)
   

Yola ML et al., Oxytocin imprinted polymer based surface plasmon resonance sensor and its application to milk sample.
Sensors and Actuators B: Chemical, 221, 842-848, (2015)
   

Atar N et al., Sensitive determination of citrinin based on molecular imprinted electrochemical sensor.
Applied Surface Science, 362, 315-322, (2016)
   

Ertan B et al., Sensitive analysis of simazine based on platinum nanoparticles on polyoxometalate/multi-walled carbon nanotubes.
Journal of Colloid and Interface Science, 470, 14-21, (2016)
   

Yola ML et al., New molecular imprinted voltammetric sensor for determination of ochratoxin A.
Materials Science and Engineering: C, 61, 368-375, (2016)
   

Yola ML et al., A Molecular Imprinted Voltammetric Sensor Based on Carbon Nitride Nanotubes: Application to Determination of Melamine.
Journal of The Electrochemical Society, 163, (13), B588-B593, (2016)
   

Akyildirim O et al., Palladium nanoparticles functionalized graphene quantum dots with molecularly imprinted polymer for electrochemical analysis of citrinin.
Journal of Molecular Liquids, 243, 677-681, (2017)
   

Yola ML et al., Electrochemical Detection of Atrazine by Platinum Nanoparticles/Carbon Nitride Nanotubes with Molecularly Imprinted Polymer.
Industrial & Engineering Chemistry Research, 56, (27), 7631-7639, (2017)
   

Yola ML et al., Molecular imprinting polymer with polyoxometalate/carbon nitride nanotubes for electrochemical recognition of bilirubin.
Electrochimica Acta, 246, 135-140, (2017)
   

Yola ML et al., A Review: Molecularly Imprinted Electrochemical Sensors for Determination of Biomolecules/Drug.
Current Analytical Chemistry, 13, (1), 13-17, (2017)
   

Beytur M et al., A highly selective and sensitive voltammetric sensor with molecularly imprinted polymer based silver@gold nanoparticles/ionic liquid modified glassy carbon electrode for determination of ceftizoxime.
Journal of Molecular Liquids, 251, 212-217, (2018)
   

Onac C et al., Transport of melamine by a new generation of nano-material membranes containing carbon nanotubes and determination with surface plasmon resonance.
Innovative Food Science & Emerging Technologies, 45, 467-470, (2018)
   

Yola ML et al., Phenylethanolamine A (PEA) Imprinted Polymer on Carbon Nitride Nanotubes/Graphene Quantum Dots/Core-Shell Nanoparticle Composite for Electrochemical PEA Detection in Urine Sample.
Journal of The Electrochemical Society, 165, (2), H1-H9, (2018)
   

Yola ML et al., A novel detection approach for serotonin by graphene quantum dots/two-dimensional (2D) hexagonal boron nitride nanosheets with molecularly imprinted polymer.
Applied Surface Science, 458, 648-655, (2018)
   

Özkan A et al., Enhanced surface plasmon resonance (SPR) signals based on immobilization of core-shell nanoparticles incorporated boron nitride nanosheets: Development of molecularly imprinted SPR nanosensor for anticancer drug, etoposide.
Biosensors and Bioelectronics, 130, 293-298, (2019)
   

Yola ML et al., Development of cardiac troponin-I biosensor based on boron nitride quantum dots including molecularly imprinted polymer.
Biosensors and Bioelectronics, 126, 418-424, (2019)
   

Yola ML et al., Development of molecular imprinted sensor including graphitic carbon nitride/N-doped carbon dots composite for novel recognition of epinephrine.
Composites Part B: Engineering, 175, Article107113-(2019)
   

Kadirsoy S et al., Molecularly imprinted QCM sensor based on delaminated MXene for chlorpyrifos detection and QCM sensor validation.
New Journal of Chemistry, 44, (16), 6524-6532, (2020)
   

Karaman C et al., A molecularly imprinted electrochemical biosensor based on hierarchical Ti2Nb10O29 (TNO) for glucose detection.
Microchimica Acta, 189, (1), Article24-(2021)
   

Yolcu M

Yolcu M et al., All-solid-State Potentiometric Cu(II)-selective Sensor Based on Ion Imprinted Methacrylamide Polymer.
Electroanalysis, 30, (6), 1147-1154, (2018)
   

Yolcu M et al., A Novel Copper Selective Sensor Based on Ion Imprinted 2-Vinylpyridine Polymer.
Canadian Journal of Chemistry - Revue Canadienne de Chimie, 96, (12), 1027-1036, (2018)
   

Yonamine Y

Yonamine Y et al., ELISA-Mimic Screen for Synthetic Polymer Nanoparticles with High Affinity to Target Proteins.
Biomacromolecules, 13, (9), 2952-2957, (2012)
   

Yonetani K

Yoshikawa M et al., Proceeding, Chiral recognition ability of molecularly imprinted membranes with oligopeptide derivative tweezers, 
331, (2002)
   

Yoshikawa M et al., Molecularly imprinted polymeric membranes with oligopeptide tweezers for optical resolution.
Desalination, 149, (1-3), 287-292, (2002)
   

Yoshikawa M et al., Optical resolution of racemic amino acid derivatives with molecularly imprinted membranes bearing oligopeptide tweezers.
Journal of Polymer Science Part A: Polymer Chemistry, 43, (2), 385-396, (2005)
   

Yoneyama H

Kugimiya A et al., Sialic acid imprinted polymer-coated quartz crystal microbalance.
Electroanalysis, 12, (16), 1322-1326, (2000)
   

Yong G

Wei D et al., Improving the enzymatic enantioselective ammonolysis of phenylglycine methyl ester by molecular imprinting of the lipase.
Abstracts of Papers of the American Chemical Society, 224, (ORGN), 021-021, (2002)
   

Yong GP

Zhang XB et al., Hollow porous molecularly imprinted polymer nanosphere for fast and efficient recognition of bisphenol A.
RSC Advances, 2, (26), 9778-9780, (2012)
   

Yong JWH

Pan CZ et al., Progress and development of analytical methods for gibberellins.
Journal of Separation Science, 40, (1), 346-360, (2017)
   

Yong KL

Huo SX et al., Synthesis and Characterization of p-Hydroxyacetophenone Molecularly Imprinted Polymer.
Journal of Instrumental Analysis, 27, (8), 866-869, (2008)
   

Lv JC et al., Synthesis of molecularly imprinted polymer of loureirin B and its application in selective extraction of functional components from dragon's blood.
Journal of Liquid Chromatography & Related Technologies, 34, (19), 2373-2382, (2011)
   

Yong KT

Zeng SW et al., Nanomaterials enhanced surface plasmon resonance for biological and chemical sensing applications.
Chemical Society Reviews, 43, (10), 3426-3452, (2014)
   

Yong KW

Choi JR et al., Progress in Molecularly Imprinted Polymers for Biomedical Applications.
Combinatorial Chemistry & High Throughput Screening, 22, (2), 78-88, (2019)
   

Yong W

Shen RL et al., Study on the Recognition Property of Molecularly Imprinted Polymers with Methyltestosterone as Template.
Modern Scientific Instruments, (6), 76-(2008)
   

Yong XY

Yu HL et al., Materials Established for Enantioselective Release of Chiral Compounds.
Industrial & Engineering Chemistry Research, 55, (21), 6037-6048, (2016)
   

Yong YH

Ma XB et al., Magnetic molecularly imprinted specific solid-phase extraction for determination of dihydroquercetin from Larix griffithiana using HPLC.
Journal of Separation Science, 43, (12), 2301-2310, (2020)
   

Yongabi D

Stilman W et al., Optimization and characterization of a flow cell for heat-transfer-based biosensing.
physica status solidi (a), 214, (9), ArticleNo1600758-(2017)
   

Gennaro A et al., Cell detection by surface imprinted polymers (SIPs) - A study of the sensor surface by optical and dielectric relaxation spectroscopy.
IEEE Transactions on Dielectrics and Electrical Insulation, 25, (3), 816-821, (2018)
   

Yongabi D et al., Cell detection by surface imprinted polymers SIPs: A study to unravel the recognition mechanisms.
Sensors and Actuators B: Chemical, 255, (Part 1), 907-917, (2018)
   

Cornelis P et al., Sensitive and specific detection of E. coli using biomimetic receptors in combination with a modified heat-transfer method.
Biosensors and Bioelectronics, 136, 97-105, (2019)
   

Stilman W et al., Detection of yeast strains by combining surface-imprinted polymers with impedance-based readout.
Sensors and Actuators B: Chemical, 340, Article129917-(2021)
   

Yongsheng Y

Li CX et al., Synthesis and applications of novel attapulgite-supported Co(II)-imprinted polymers for selective solid-phase extraction of cobalt(II) from aqueous solutions.
International Journal of Environmental Analytical Chemistry, 91, (11), 1035-1049, (2011)
   

Yoo DK

Hoai NT et al., Batch and column separation characteristics of copper-imprinted porous polymer micro-beads synthesized by a direct imprinting method.
Journal of Hazardous Materials, 173, (1-3), 462-467, (2010)
   

Yoo HS

Zeng ZY et al., Synthetic Polymer Nanoparticles with Antibody-like Affinity for a Hydrophilic Peptide.
ACS Nano, 4, (1), 199-204, (2009)
   

Yoon CW

Zhu T et al., Solid-phase Extraction of [beta]-Sitosterol from Oldenlandia diffusa Using Molecular Imprinting Polymer.
Chinese Journal of Chemistry, 29, (6), 1246-1250, (2011)
   

Yoon H

Lee KM et al., Chemical Design of Functional Polymer Structures for Biosensors: From Nanoscale to Macroscale.
Polymers, 10, (5), ArticleNo551-(2018)
   

Yoon J

Lee B et al., Scattering studies of nanoporous organosilicate thin films imprinted with reactive star porogens.
Macromolecules, 38, (22), 8991-8995, (2005)
   

Heo K et al., Synchrotron X-ray Scattering Study of the Mechanism of Nanopore Generation in Nanoporous Organosilicate Thin Films Imprinted with a Reactive Six-Armed Porogen.
Journal of Physical Chemistry B, 110, (32), 15887-15895, (2006)
   

Kim HN et al., Recent progress on polymer-based fluorescent and colorimetric chemosensors.
Chemical Society Reviews, 40, (1), 79-93, (2011)
   

Yoon JH

Kim DM et al., A potentiometric non-enzymatic glucose sensor using a molecularly imprinted layer bonded on a conducting polymer.
Biosensors and Bioelectronics, 91, 276-283, (2017)
   

Yoon JY

Huang JX et al., Enantioselective discrimination of D- and L-phenylalanine by chiral polyaniline thin films.
Advanced Materials, 15, (14), 1158-1161, (2003)
   

Yoon SD

Park HR et al., Synthesis of molecular imprinting polymers separating toluic acid isomers (II).
Journal of Polymers and the Environment, 13, (1), 81-86, (2005)
   

Park HR et al., Molecular imprinting polymers for the separation of toluic acid isomers.
Journal of Applied Polymer Science, 96, (3), 650-654, (2005)
   

Park HR et al., Separation of hydroxybenzoic acid isomers using the molecular imprinting technique.
Journal of Applied Polymer Science, 105, (5), 2824-2829, (2007)
   

Yun YH et al., Preparation and characterization of molecularly imprinted polymers for the selective separation of 2, 4-dichlorophenoxyacetic acid.
Journal of Materials Science, 44, (22), 6206-6211, (2009)
   

Byun HS et al., Selective separation of aspirin using molecularly imprinted polymers.
Separation and Purification Technology, 74, (1), 144-153, (2010)
   

Yoon SD et al., Application of Separation Technology and Supercritical Fluids Process.
Clean Technology, 18, (2), 123-143, (2012)
   

Yoon SD et al., Molecularly imprinted polymers for selective separation of acetaminophen and aspirin by using supercritical fluid technology.
Chemical Engineering Journal, 226, 171-180, (2013)
   

Hwang MJ et al., Adsorption of toxic gases on molecularly imprinted polymer coated QCM: measurements and modeling for partial pressure in gas mixture.
Adsorption, 25, (4), 825-832, (2019)
   

Tak HY et al., Sulindac imprinted mungbean starch/PVA biomaterial films as a transdermal drug delivery patch.
Carbohydrate Polymers, 208, 261-268, (2019)
   

Kim HS et al., Preparation and release properties of arbutin imprinted inulin/polyvinyl alcohol biomaterials.
International Journal of Biological Macromolecules, 161, 763-770, (2020)
   

Kim HS et al., Preparation and evaluation of functional allopurinol imprinted starch based biomaterials for transdermal drug delivery.
International Journal of Biological Macromolecules, 175, 217-228, (2021)
   

Yoon SK

Yoon SK et al., Synthesis of molecularly imprinted polymer (MIP) by radiation-induced polymerization and separation of ferulic acid from rice oil using MIP-packed column.
Analytical Science &Technology, 19, (3), 218-225, (2006)
   

Yoon YS

Yang DH et al., Simple method for the fabrication of 1-hydroxypyrene-imprinted TiO2 gel nanofilms.
Current Applied Physics, 9, (2, Supplement 1), e136-e139, (2009)
   

Yordanova T

Dakova I et al., Non-chromatographic mercury speciation and determination in wine by new core-shell ion-imprinted sorbents.
Journal of Hazardous Materials, 231-232, 49-56, (2012)
   

Yordanova T et al., Polymeric ion-imprinted nanoparticles for mercury speciation in surface waters.
Microchemical Journal, 113, 42-47, (2014)
   

Karadjova I et al., Nanomaterials for elemental speciation.
Journal of Analytical Atomic Spectrometry, 31, (10), 1949-1973, (2016)
   

Mitreva M et al., Chromate surface-imprinted silica gel sorbent for speciation of Cr in surface waters.
Turkish Journal of Chemistry, 40, (6), 921-932, (2016)
   

Yordanova TV

Yordanova TV et al., Proceeding, Mercury Determination and Speciation in Surface Waters after Preconcentration with Nanosized Ion-imprinted Polymer Gels, 
Ozdemir C, Sahinkaya S, Kalipci E, Oden MK (Eds.), (2013)
   

Yosef I

Pachón LD et al., Chiral imprinting of palladium with cinchona alkaloids.
Nature Chemistry, 1, (2), 160-164, (2009)
   

Yoshida A

Yoshida A et al., Gold Nanoparticle-Incorporated Molecularly Imprinted Microgels as Radiation Sensitizers in Pancreatic Cancer.
ACS Applied Bio Materials, 2, (3), 1177-1183, (2019)
   

Cheubong C et al., Molecularly Imprinted Nanogels Capable of Porcine Serum Albumin Detection in Raw Meat Extract for Halal Food Control.
Analytical Chemistry, 92, (9), 6401-6407, (2020)
   

Yoshida IVP

Segatelli MG et al., Cadmium ion-selective sorbent preconcentration method using ion imprinted poly(ethylene glycol dimethacrylate-co-vinylimidazole).
Reactive and Functional Polymers, 70, (6), 325-333, (2010)
   

Santos WdJR et al., Novel electrochemical sensor for the selective recognition of chlorogenic acid.
Analytica Chimica Acta, 695, (1-2), 44-50, (2011)
   

Santos WdJR et al., Electrochemical sensor based on imprinted sol-gel and nanomaterial for determination of caffeine.
Sensors and Actuators B: Chemical, 166-167, (1), 739-745, (2012)
   

Yoshida M

Yoshida M et al., Metal ion-imprinted resins with novel bifunctional monomer by surface template polymerization.
Journal of Chemical Engineering of Japan, 29, (1), 174-176, (1996)
   

Hara T et al., Separation of rare earth metals by imprinted polymers utilizing surface template polymerization.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 30-30, (1997)
   

Yoshida M et al., A novel bifunctional organophosphorus monomer for metal ion-imprinted polymers by surface template polymerization.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 25-25, (1997)
   

Yoshida M et al., Spacer effect of novel bifunctional organophosphorus monomers in metal-imprinted polymers prepared by surface template polymerization.
Journal of Polymer Science Part A: Polymer Chemistry, 36, (15), 2727-2734, (1998)
   

Yoshida M et al., An enantioselective polymer prepared by the surface molecular-imprinting technique.
Chemistry Letters, 27, (9), 925-926, (1998)
   

Toorisaka E et al., Artificial biocatalyst prepared by the surface molecular imprinting technique.
Chemistry Letters, 28, (5), 387-388, (1999)
   

Uezu K et al., Molecular recognition using surface template polymerization.
Chemtech, 29, (4), 12-18, (1999)
   

Yoshida M et al., Metal ion imprinted microsphere prepared by surface molecular imprinting technique using water-in-oil-in-water emulsions.
Journal of Applied Polymer Science, 73, (7), 1223-1230, (1999)
   

Yoshida M et al., Required properties for functional monomers to produce a metal template effect by a surface molecular imprinting technique.
Macromolecules, 32, (4), 1237-1243, (1999)
   

Araki K et al., Lanthanide-imprinted resins prepared by surface template polymerization.
Journal of Chemical Engineering of Japan, 33, (4), 665-668, (2000)
   

Goto M et al., Book chapter, Surface molecular imprinted resins recognizable amino acid chirality, 
In: Ion Exchange At The Millennium, Greig JA (Ed.) World Scientific Publishing: Singapore, 322-329, (2000)
   

Yoshida M et al., Chiral-recognition polymer prepared by surface molecular imprinting technique.
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 169, (1-3), 259-269, (2000)
   

Yoshida M et al., Surface imprinted polymers recognizing amino acid chirality.
Journal of Applied Polymer Science, 78, (4), 695-703, (2000)
   

Yoshida M et al., Metal-imprinted microsphere prepared by surface template polymerization and its application to chromatography.
Journal of Polymer Science Part A: Polymer Chemistry, 38, (4), 689-696, (2000)
   

Uezu K et al., Characterization and control of matrix for surface molecular-imprinted polymer.
Kagaku Kogaku Ronbunshu, 27, (6), 753-755, (2001)
   

Uezu K et al., Lanthanoid element recognition on surface-imprinted polymers containing dioleylphosphoric acid as a functional host.
Analytical Sciences, 20, (11), 1593-1597, (2004)
   

Yoshida R

Miyata T et al., Preparation of micro-sized molecule-responsive gels by photo-polymerization.
Polymer Preprints, Japan, 55, (1), 1708-(2006)
   

Yoshida R et al., Book chapter, Stimuli-Responsive Hydrogels and Their Application to Functional Materials, 
In: Biomedical Applications of Hydrogels Handbook, Park K, Okano T (Eds.) Springer: New York, 19-43, (2010)
   

Shiraki Y et al., Preparation of Molecule-Responsive Microsized Hydrogels via Photopolymerization for Smart Microchannel Microvalves.
Macromolecular Rapid Communications, 36, (6), 515-519, (2015)
   

Yoshida T

Kanazawa R et al., Preparation of molecular imprinted thermosensitive gel adsorbents and adsorption/desorption properties of heavy metal ions by temperature swing.
Journal of Chemical Engineering of Japan, 37, (1), 59-66, (2004)
   

Yoshida W

Yoshida W et al., Cu(II)-Imprinted Chitosan Derivative Containing Carboxyl Groups for the Selective Removal of Cu(II) from Aqueous Solution.
Journal of Chemical Engineering of Japan, 49, (7), 630-634, (2016)
   

Yoshidome T

Nishimura S et al., Selective measurement of optical isomer by using molecular imprinting and surface plasmon resonance sensor.
Analytical Sciences, 17, (Supplement (Proceedings of IUPAC International Congress on Analytical Sciences 2001 (ICAS 2001))), i1697-i1699, (2001)
   

Nishimura S et al., Selective measurements of tetracaine by using a surface plasmon resonance sensor with a molecular imprinted film.
Bunseki Kagaku, 50, (11), 733-738, (2001)
   

Yoshihama I

Kitahara KI et al., Synthesis of monodispersed molecularly imprinted polymer particles for high-performance liquid chromatographic separation of cholesterol using templating polymerization in porous silica gel bound with cholesterol molecules on its surface.
Journal of Chromatography A, 1217, (46), 7249-7254, (2010)
   

Yoshihara K

Inoue K et al., Chiroselective re-binding of saccharides to the fibrous aggregates prepared from organic gels of cholesterylphenylboronic acid.
Tetrahedron Letters, 39, (19), 2981-2984, (1998)
   

Yoshihara S

Osawa T et al., Importance of the position of vinyl group on [beta]-cyclodextrin for the effective imprinting of amino acid derivatives and oligopeptides in water.
Macromolecules, 39, (7), 2460-2466, (2006)
   

Song SH et al., Recognition of Solution Structures of Peptides by Molecularly Imprinted Cyclodextrin Polymers.
Macromolecules, 40, (10), 3530-3532, (2007)
   

Yoshiizumi R

Yoshimi Y et al., Chiral-Discriminative Gate Effect in Self-Supporting Phenylalanine-Imprinted Poly(Methacrylic Acid-co-2-Vinylpyridine-co-Triethyleneglycol Dimethacrylate) Membrane.
Journal of Chemical Engineering of Japan, 42, (8), 600-606, (2009)
   

Yoshikawa K

Kozuka H et al., Binding of anthraquinone dyes by cross-linked polyvinylpyrrolidone.
Journal of Polymer Science, Polymer Chemistry Edition, 24, (10), 2695-2700, (1986)
   

Kitayama Y et al., Post-Cross-Linked Molecular Imprinting with Functional Polymers as a Universal Building Block for Artificial Polymeric Receptors.
Macromolecules, 50, (19), 7526-7534, (2017)
   

Yoshikawa M

Yoshikawa M et al., Molecularly imprinted polymeric membranes for optical resolution.
Journal of Membrane Science, 108, (1-2), 171-175, (1995)
   

Yoshikawa M et al., Enantioselective electrodialysis of N-a-acetyltryptophans through molecularly imprinted polymeric membranes.
Chemistry Letters, 25, (8), 611-612, (1996)
   

Yoshikawa M et al., Molecularly imprinted polymeric membranes containing DIDE derivatives for optical resolution of amino acids.
Macromolecules, 29, (25), 8197-8203, (1996)
   

Izumi JI et al., Enantioselective Permeation of Racemic Glutamic Acid through Alternative Molecularly Imprinted Cellulose Acetate Membranes.
Membrane, 22, (3), 149-154, (1997)
   

Yoshikawa M et al., Alternative molecularly imprinted polymeric membranes from a tetrapeptide residue consisting of D- or L-amino acids.
Macromolecular Rapid Communications, 18, (9), 761-767, (1997)
   

Yoshikawa M, Molecularly imprinted polymeric membranes for optical resolution.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 154-154, (1997)
   

Yoshikawa M et al., Enantioselective electrodialysis of amino acids with charged polar side chains through molecularly imprinted polymeric membranes containing DIDE derivatives.
Polymer Journal, 29, (3), 205-210, (1997)
   

Yoshikawa M et al., Molecularly imprinted polymeric membranes involving tetrapeptide EQKL derivatives as chiral-recognition sites toward amino acids.
Analytica Chimica Acta, 365, (1-3), 59-67, (1998)
   

Yoshikawa M et al., Carboxylated polysulfone membranes having a chiral recognition site induced by an alternative molecular imprinting technique.
Polymer Bulletin, 40, (4-5), 517-524, (1998)
   

Yoshikawa M et al., Chiral recognition of N-a-acetyltryptophans with molecularly imprinted polymeric membranes containing DVNE derivatives.
Sen'i Gakkaishi, 54, (2), 77-84, (1998)
   

Yoshikawa M, Book chapter, Molecularly imprinted polymeric membranes for optical resolution, 
In: Molecular and Ionic Recognition with Imprinted Polymers, Bartsch RA, Maeda M (Eds.) The American Chemical Society: Washington DC, Ch. 12, 170-187, (1998)
   

Yoshikawa M et al., Alternative molecular imprinting, a facile way to introduce chiral recognition sites.
Reactive and Functional Polymers, 42, (1), 93-102, (1999)
   

Yoshikawa M et al., Molecularly imprinted polymeric membranes having EFF derivatives as a chiral recognition site.
Macromolecular Chemistry And Physics, 200, (6), 1458-1465, (1999)
   

Yoshikawa M et al., Alternative molecularly imprinted membranes from a derivative of natural polymer, cellulose acetate.
Journal of Applied Polymer Science, 72, (4), 493-499, (1999)
   

Kondo Y et al., Molecularly imprinted polyamide membranes for chiral recognition.
Polymer Bulletin, 44, (5-6), 517-524, (2000)
   

Yoshikawa M, Optical Resolution with Molecularly Imprinted Polymeric Membranes.
Membrane, 25, (6), 280-282, (2000)
   

Kondo Y et al., Effect of solvent composition on chiral recognition ability of molecularly imprinted DIDE derivatives.
Analyst, 126, (6), 781-783, (2001)
   

Yoshikawa M et al., Novel polymeric membranes having chiral recognition sites converted from tripeptide derivatives.
Analyst, 126, (6), 775-780, (2001)
   

Yoshikawa M, Molecularly Imprinted Polymers.
Membrane, 26, (1), 39-45, (2001)
   

Yoshikawa M et al., Factors governing chiral recognition ability of molecularly imprinted oligopeptide membranes.
Abstracts of Papers of the American Chemical Society, 222, (COLL), 9-9, (2001)
   

Yoshikawa M et al., Recognition and selective transport of nucleic acid components through molecularly imprinted polymeric membranes.
Macromolecular Materials And Engineering, 286, (1), 52-59, (2001)
   

Yoshikawa M et al., Selective Recognition and Permeation of Bisphenol A with Molecularly Imprinted Polyamide Membranes.
Membrane, 26, (4), 185-188, (2001)
   

Yoshikawa M et al., Novel membrane materials having EEE derivatives as a chiral recognition site.
European Polymer Journal, 37, (2), 335-342, (2001)
   

Yoshikawa M et al., Proceeding, Chiral recognition ability of molecularly imprinted membranes with oligopeptide derivative tweezers, 
331, (2002)
   

Yoshikawa M et al., Relationship between enantioselectivity of alternative molecularly imprinted polymeric membranes and species of amino acid residues composing chiral recognition sites.
Bioseparation, 10, (6), 323-330, (2002)
   

Yoshikawa M et al., Molecularly imprinted polymeric membranes with oligopeptide tweezers for optical resolution.
Desalination, 149, (1-3), 287-292, (2002)
   

Yoshikawa M et al., Proceeding, Chiral recognition ability of oligopeptide derivatives consisiting of glutamyl residues, 
625, (2002)
   

Yoshikawa M, Molecularly imprinted polymeric membranes.
Bioseparation, 10, (6), 277-286, (2002)
   

Kondo Y et al., Effect of constituting amino acid residue numbers on molecularly imprinted chiral recognition sites.
Chirality, 15, (6), 498-503, (2003)
   

Robertson GP et al., Modified polysulfones. VI. Preparation of polymer membrane materials containing benzimine and benzylamine groups as precursors for molecularly imprinted sensor devices.
Journal of Polymer Science Part A: Polymer Chemistry, 41, (9), 1316-1329, (2003)
   

Taniwaki K et al., Proceeding, Evaluation of the recognition ability of molecularly imprinted materials by SPR spectroscopy, 
IIIJ18, (2003)
   

Taniwaki K et al., Evaluation of the recognition ability of molecularly imprinted materials by surface plasmon resonance (SPR) spectroscopy.
Analytica Chimica Acta, 489, (2), 191-198, (2003)
   

Yoshikawa M et al., Chiral recognition sites converted from tetrapeptide derivatives adopting racemates as print molecules.
Macromolecular Bioscience, 3, (9), 487-498, (2003)
   

Yoshikawa M et al., Proceeding, Molecularly Imprinted Films Derived from Torlon Polyamide-imide, 
1U13, (2004)
   

Yoshikawa M et al., Optical resolution of racemic amino acid derivatives with molecularly imprinted membranes bearing oligopeptide tweezers.
Journal of Polymer Science Part A: Polymer Chemistry, 43, (2), 385-396, (2005)
   

Yoshikawa M et al., Chiral recognition ability of oligopeptide derivatives consisting of glutamyl residues.
Journal of Applied Polymer Science, 95, (6), 1302-1309, (2005)
   

Yoshikawa M et al., Molecularly imprinted films derived from Torlon[trademark] polyamide-imide.
Journal of Molecular Structure, 739, (1-3), 41-46, (2005)
   

Yoshikawa M et al., Chiral recognition sites from carbonyldioxyglyceryl moiety by an alternative molecular imprinting.
Sensors and Actuators B: Chemical, 104, (2), 282-288, (2005)
   

Yoshikawa M, A facile way to construct molecular recognition materials.
Sen'i Gakkaishi, 61, (4), P_99-P_102, (2005)
   

Yoshikawa M et al., Moelcularly imprinted materials from water soluble proteins from Geobacillus thermodenitrificans DSM465.
Polymer Preprints, Japan, 54, (1), 1478-(2005)
   

Yoshikawa M et al., Green polymers from Geobacillus thermodenitrificans DSM465 - Candidates for molecularly imprinted materials.
Macromolecular Bioscience, 6, (3), 210-215, (2006)
   

Yoshikawa M et al., Chiral separation membranes from modified polysulfone having myrtenal-derived terpenoid side groups.
European Polymer Journal, 42, (10), 2532-2539, (2006)
   

Yoshikawa M et al., Molecularly Imprinted Nanofiber Membranes from Carboxylated Polysulfone by Electrospray Deposition.
Macromolecular Rapid Communications, 28, (21), 2100-2105, (2007)
   

Yoshikawa M et al., Evaluation of the Recognition Ability of Molecularly Imprinted Proteins by Surface Plasmon Resonance (SPR) Spectroscopy.
Membrane, 32, (1), 40-44, (2007)
   

Itou Y et al., Optical resolution of racemic amino acid derivatives with molecularly imprinted membranes from tetrapetide consisting of glycinyl residues.
Journal of Membrane Science, 325, (1), 371-375, (2008)
   

Yoshikawa M et al., Surface plasmon resonance studies on molecularly imprinted films.
Journal of Applied Polymer Science, 110, (5), 2826-2832, (2008)
   

Sueyoshi Y et al., Molecularly imprinted nanofiber membranes from cellulose acetate aimed for chiral separation.
Journal of Membrane Science, 357, (1-2), 90-97, (2010)
   

Hatanaka M et al., Polyurea With L-Lysinyl Residues as Components: Application to Membrane Separation of Enantiomers.
Macromolecular Chemistry And Physics, 212, (13), 1351-1359, (2011)
   

Yoshikawa M et al., Molecularly imprinted nanofiber membranes.
Current Opinion in Chemical Engineering, 1, (1), 18-26, (2011)
   

Hatanaka M et al., Polyurea Bearing L-Lysinyl Residue as a Chiral Building Block and Its Application to Optical Resolution.
Journal of Materials Science Research, 1, (4), 114-122, (2012)
   

Mizushima H et al., Electrospun nanofiber membranes from polysulfones with chiral selector aimed for optical resolution.
European Polymer Journal, 48, (10), 1717-1725, (2012)
   

Sueyoshi Y et al., Chiral separation with molecularly imprinted polysulfone-aldehyde derivatized nanofiber membranes.
Journal of Membrane Science, 401-402, (1), 89-96, (2012)
   

Hatanaka M et al., Chiral Polyurea with L-Lysinyl Residue Aimed for Optical Resolution.
Journal of Membrane and Separation Technology, 2, (2), 109-119, (2013)
   

Hatanaka M et al., Chiral separation with polyurea membrane consisting of L-lysinyl residue: Proposal of facile method for prediction of permselectivity.
Journal of Applied Polymer Science, 128, (1), 123-131, (2013)
   

Yoshikawa M et al., Book chapter, Enantioselective Membranes, 
In: Encyclopedia of Membrane Science and Technology, Hoek EMV, Tarabara VV (Eds.) John Wiley & Sons, Inc.: (2013)
   

Isezaki J et al., Molecularly Imprinted Nanofiber Membranes: Localization of Molecular Recognition Sites on the Surface of Nanofiber.
Journal of Membrane and Separation Technology, 3, (3), 119-126, (2014)
   

Yoshikawa M, Separation with Molecularly Imprinted Membranes.
Kobunshi Ronbunshu, 71, (5), 223-241, (2014)
   

Ghorani B et al., Approaches for the assembly of molecularly imprinted electrospun nanofibre membranes and consequent use in selected target recognition.
Food Research International, 78, 448-464, (2015)
   

Nakai Y et al., Cellulose as a membrane material for optical resolution.
Polymer Journal, 47, 334-339, (2015)
   

Yoshikawa M et al., Book chapter, Application of Membranes from Cellulose Acetate Nanofibers, 
In: Handbook of Polymer Nanocomposites. Processing, Performance and Application, Pandey JK, Takagi H, Nakagaito AN, Kim HJ (Eds.) Springer: Berlin, Heidelberg, Ch. 71, 369-394, (2015)
   

Zheng HY et al., Molecularly imprinted cellulose membranes for pervaporation separation of xylene isomers.
Journal of Membrane Science, 478, 148-154, (2015)
   

Iwasaki H et al., Molecularly imprinted polyacrylonitrile adsorbents for the capture of Cs+ ions.
Polymer Journal, 48, 1151-1156, (2016)
   

Shiomi K et al., Molecularly Imprinted Chitin Nanofiber Membranes: Multi-Stage Cascade Membrane Separation within the Membrane.
Journal of Membrane and Separation Technology, 5, (3), 103-114, (2016)
   

Yoshikawa M et al., Molecularly Imprinted Membranes: Past, Present, and Future.
Chemical Reviews, 116, (19), 11500-11528, (2016)
   

Yoshikazo K

Hosoya K et al., Study on molecular recognition by molecular imprinting.
Kuromatogurafi, 18, (2), 104-105, (1997)
   

Yoshikiyo K

Yamamoto T et al., The Effects of Cyclodextrins on the Conformation of Proteins.
Current Organic Chemistry, 15, (6), 831-838, (2011)
   

Yoshimatsu K

Ye L et al., Preparation of molecularly imprinted polymers in supercritical carbon dioxide.
Journal of Applied Polymer Science, 102, (3), 2863-2867, (2006)
   

Yoshimatsu K et al., Uniform molecularly imprinted microspheres and nanoparticles prepared by precipitation polymerization: The control of particle size suitable for different analytical applications.
Analytica Chimica Acta, 584, (1), 112-121, (2007)
   

Reimhult K et al., Characterization of QCM sensor surfaces coated with molecularly imprinted nanoparticles.
Biosensors and Bioelectronics, 23, (12), 1908-1914, (2008)
   

Trikka F et al., Molecularly imprinted polymers that selectively recognize histamine.
FEBS Journal, 275, (Suppl. 1), 373-373, (2008)
   

Yoshimatsu K et al., Selective molecular adsorption using electrospun nanofiber affinity membranes.
Biosensors and Bioelectronics, 23, (7), 1208-1215, (2008)
   

Yoshimatsu K et al., Molecularly imprinted polymer microspheres (spherical OMNiMIPs) prepared by precipitation polymerization using a single bifunctional monomer.
Abstracts of Papers of the American Chemical Society, 236, (ANYL), 388-(2008)
   

Yoshimatsu K et al., A simple method for preparation of molecularly imprinted nanofiber materials with signal transduction ability.
Chemical Communications, (17), 2022-2024, (2008)
   

Yoshimatsu K et al., Peptide-imprinted polymer microspheres prepared by precipitation polymerization using a single bi-functional monomer.
Analyst, 134, (4), 719-724, (2009)
   

Yoshimatsu K et al., Corrigendum to "Uniform molecularly imprinted microspheres and nanoparticles prepared by precipitation polymerization: The control of particle size suitable for different analytical applications" [Anal. Chim. Acta 584 (2007) 112-121].
Analytica Chimica Acta, 657, (2), 215-215, (2010)
   

Trikka FA et al., Molecularly imprinted polymers for histamine recognition in aqueous environment.
Amino Acids, 43, (5), 2113-2124, (2012)
   

Yoshimatsu K et al., Influence of template/functional monomer/cross-linking monomer ratio on particle size and binding properties of molecularly imprinted nanoparticles.
Journal of Applied Polymer Science, 124, (2), 1249-1255, (2012)
   

Malm B et al., Characterization of molecularly imprinted polymer nanoparticles by photon correlation spectroscopy.
Journal of Molecular Recognition, 27, (12), 714-721, (2014)
   

Yoshimatsu K et al., Preparation of abiotic polymer nanoparticles for sequestration and neutralization of a target peptide toxin.
Nature Protocols, 10, (4), 595-604, (2015)
   

Yoshimi Y

Yoshimi Y et al., Template recognition and changes in the diffusive permeability of a thin layer of molecularly imprinted polymer.
Japanese Journal of Artificial Organs, 29, (2), 441-445, (2000)
   

Hattori K et al., Gate effect of cellulosic dialysis membrane grafted with molecularly imprinted polymer.
Journal of Chemical Engineering of Japan, 34, (11), 1466-1469, (2001)
   

Yoshimi Y et al., Gate effect Yoshimi Y et al., Gate Effect Hattori K et al., Gate effect of theophylline-imprinted polymers grafted to the cellulose by living radical polymerization.
Journal of Membrane Science, 233, (1-2), 169-173, (2004)
   

Hattori K et al., Chiral-selectivity on gate effect of phenylalanine-imprinted polymers grafted onto cellulosic membrane.
Chem Sens, 20, (Supplement B), 384-385, (2004)
   

Hattori K et al., Effect of electrostatic interactions on gate effect in molecularly imprinted polymers.
Electrochemistry, 72, (7), 508-510, (2004)
   

Sekine S et al., Chiral sensing in organic solvent using gate effect of molecularly imprinted polymer.
Chem Sens, 21, (Supplement B), 22-24, (2005)
   

Sekine SI et al., Proceeding, Development of an amperometric sensor for chiral recognition in organic solvent using the gate effect of molecularly imprinted polymer, 
(2006)
   

Yoshimi Y et al., Star shaped molecularly imprinted polymer.
Polymer Preprints, Japan, 55, (2), 5404-5405, (2006)
   

Hattori K et al., Gate effect of glucose-imprinted dialysis membrane.
Nephrology Dialysis Transplantation, 22, (Suppl. 6), 121-122, (2007)
   

Sekine SI et al., Influence of solvents on chiral discriminative gate effect of molecularly imprinted poly(ethylene glycol dimethacrylate-co-methacrylic acid).
Sensors and Actuators B: Chemical, 127, (2), 512-517, (2007)
   

Yoshimi Y et al., Development of an enzyme-free glucose sensor using the gate effect of a molecularly imprinted polymer.
Journal of Artificial Organs, 12, (4), 264-270, (2009)
   

Yoshimi Y et al., A glucose sensor using gate effect of molecularly imprinted polymer grafted on electrode.
Journal of Bioscience and Bioengineering, 108, (Supplement 1), S31-S31, (2009)
   

Yoshimi Y et al., Chiral-Discriminative Gate Effect in Self-Supporting Phenylalanine-Imprinted Poly(Methacrylic Acid-co-2-Vinylpyridine-co-Triethyleneglycol Dimethacrylate) Membrane.
Journal of Chemical Engineering of Japan, 42, (8), 600-606, (2009)
   

Yoshimi Y et al., Influence of the solvent on nature of gate effect in molecularly imprinted membrane.
Analytica Chimica Acta, 682, (1-2), 110-116, (2010)
   

Hattori K et al., Chiral-selectivity on gate effect of phenylalanine-imprinted polymers grafted onto cellulosic membrane.
Chem Sens, 20, (Supplement B), 384-385, (2011)
   

Yoshimi Y et al., Application of the 'gate effect' of a molecularly imprinted polymer grafted on an electrode for the real-time sensing of heparin in blood.
Analyst, 138, (17), 5121-5128, (2013)
   

Yoshimi Y et al., Changes in the Porosity and Permeability of a Molecularly Imprinted Membrane Induced by the Adsorption of a Trace Quantity of Template.
The Open Analytical Chemistry Journal, 7, 22-29, (2013)
   

Yoshimi Y et al., Improved Gate Effect Enantioselectivity of Phenylalanine-Imprinted Polymers in Water by Blending Crosslinkers.
Analytica Chimica Acta, 862, 77-85, (2015)
   

Yoshimi Y, Biomimetic sensors using of molecularly imprinted polymers.
IEEJ Transactions on Sensors and Micromachines, 135, (8), 305-310, (2015)
   

Yoshimi Y et al., Stabilized sensing of heparin in whole blood using the 'gate effect' of heparin-imprinted polymer grafted onto an electrode.
Molecular Imprinting, 4, (1), 13-20, (2016)
   

Yoshimi Y et al., Metaniche session 2016: Tailor-made sensors for rapid Therapeutic Drug Monitoring - Interactions between Biomaterial Physicists, Chemical Engineers and Clinicians for successful translation of technologies in Healthcare.
Journal of Stem Cells & Regenerative Medicine, 12, (2), 105-107, (2016)
   

Yoshimi Y, Book chapter, Molecularly Imprinted Polymers Applicable for Biomimetic Catalysts in Sensors, 
In: Molecularly Imprinted Catalysts: Principles, Syntheses and Applications, Li SJ, Cao SS, Piletsky SA, Turner APF (Eds.) Elsevier: Amsterdam, Ch. 12, 241-252, (2016)
   

Orihara K et al., Heparin molecularly imprinted polymer thin flm on gold electrode by plasma-induced graft polymerization for label-free biosensor.
Journal of Pharmaceutical and Biomedical Analysis, 151, 324-330, (2018)
   

Yoshimi Y et al., Blood heparin sensor made from a paste electrode of graphite particles grafted with molecularly imprinted polymer.
Sensors and Actuators B: Chemical, 259, 455-462, (2018)
   

Yoshimi Y et al., Corrigendum to "Blood heparin sensor made from a paste electrode of graphite particles grafted with molecularly imprinted polymer" [Sens. Actuators B: Chem. 259 (2018) 455-462].
Sensors and Actuators B: Chemical, 333, Article129588-(2021)
   

Yoshimoto M

Mine Y et al., Enhanced enzyme activity and enantioselectivity of lipases in organic solvents by crown ethers and cyclodextrins.
Journal of Bioscience and Bioengineering, 95, (5), 441-447, (2003)
   

Mine Y et al., Structural effects of amphiphiles on Candida rugosa lipase activation by freeze-drying of aqueous solution of enzyme and amphiphile.
Journal of Bioscience and Bioengineering, 96, (6), 525-528, (2003)
   

Yoshimura K

Matsuoka S et al., Recent trends in solid phase spectrometry: 2003-2009. A Review.
Analytica Chimica Acta, 664, (1), 1-18, (2010)
   

Yoshinaga K

Ohkubo K et al., Preparation and catalytic property of L-histidyl group-introduced, cross-linked poly(ethylene imine)s imprinted by a transition-state analog of an esterolysis reaction.
Polymer, 35, (24), 5372-5374, (1994)
   

Ohkubo K et al., Molecular design of transition-state analog-imprinted polymer catalysts-stereoselective esterolysis of amino-acid esters.
Kobunshi Ronbunshu, 52, (10), 644-649, (1995)
   

Ohkubo K et al., Catalytic activities of novel L-histidyl group-introduced polymers imprinted by a transition-state analog in the hydrolysis of amino-acid esters.
Journal of Molecular Catalysis A: Chemical, 101, (2), L111-L114, (1995)
   

Yoshino W

Yoshimi Y et al., Stabilized sensing of heparin in whole blood using the 'gate effect' of heparin-imprinted polymer grafted onto an electrode.
Molecular Imprinting, 4, (1), 13-20, (2016)
   

Yoshioka HT

Iwata K et al., Preparation of Fluorescent Molecularly Imprinted Polymer Micropowder for Odorant Visualization.
Sensors and Materials, 28, (3), 173-179, (2016)
   

Liu CJ et al., Preparation of molecularly imprinted polymer nanobeads for selective sensing of carboxylic acid vapors.
Analytica Chimica Acta, 1010, 1-10, (2018)
   

Ying XG et al., Molecular imprinting technique in putrescine visualized detection.
Sensors and Actuators B: Chemical, 258, 870-880, (2018)
   

Yoshioka N

Kubo H et al., Fluorescent imprinted polymers prepared with 2-acrylamidoquinoline as a signaling monomer.
Organic Letters, 7, (3), 359-362, (2005)
   

Yoshizaki M

Inoue K et al., Selectivity series in the adsorption of metal-ions on a resin prepared by crosslinking copper(II)-complexed chitosan.
Chemistry Letters, 17, (8), 1281-1284, (1988)
   

Yoshizako K

Hosoya K et al., Uniform-size macroporous polymer-based stationary-phase for HPLC prepared through molecular imprinting technique.
Chemistry Letters, 23, (8), 1437-1438, (1994)
   

Hosoya K et al., Molecularly imprinted uniform-size polymer-based stationary phase for high-performance liquid chromatography - Structural contribution of cross-linked polymer network on specific molecular recognition.
Journal of Chromatography A, 728, (1-2), 139-147, (1996)
   

Yoshizako K et al., Uniformly sized polymer based stationary phase having multi-chiral selectors.
Chemistry Letters, 25, (8), 717-718, (1996)
   

Hosoya K et al., Molecular recognition towards coplanar polychlorinated biphenyls based on the porogen imprinting effects of xylenes.
Journal of Chromatography A, 828, (1-2), 91-94, (1998)
   

Yoshizako K et al., Porogen imprinting effects.
Analytical Chemistry, 70, (2), 386-389, (1998)
   

Hosoya K et al., An unexpected molecular imprinting effect for a polyaromatic hydrocarbon, anthracene, using uniform size ethylene dimethacrylate particles.
HRC - Journal of High Resolution Chromatography, 22, (5), 256-260, (1999)
   

Hosoya K et al., Selective surface modification technique for improvement of chromatographic separation selectivity for sugar derivatives.
Analytical Sciences, 18, (1), 55-58, (2002)
   

Yoshizawa S

Yoshizawa S et al., Transcription-Type Protein Imprinted Polymers for SPR Sensing Prepared Using Target-immobilized Stamps based on Submicrometer-Sized Particles via Biotin-Avidin Linkage.
Molecular Imprinting, 3, (1), 26-34, (2015)
   

Yoshizuka K

Inoue K et al., Selectivity series in the adsorption of metal-ions on a resin prepared by crosslinking copper(II)-complexed chitosan.
Chemistry Letters, 17, (8), 1281-1284, (1988)
   

You AM

You AM et al., Colorimetric sensing of melamine using colloidal magnetically assembled molecularly imprinted photonic crystals.
RSC Advances, 6, (87), 83663-83667, (2016)
   

You AM et al., Colloidal Magnetically Assembled Molecularly Imprinted Photonic Crystals and L-Phenylalanine Sensing.
Chemical Journal of Chinese Universities, 38, (2), 182-186, (2017)
   

You AM et al., Colorimetric Chemosensor for Chloramphenicol Based on Colloidal Magnetically Assembled Molecularly Imprinted Photonic Crystals.
Journal of the Chinese Chemical Society, 64, (10), 1235-1241, (2017)
   

Zhu LL et al., Facile and versatile strategy to prepare magnetic molecularly imprinted particles based on the coassembly of magnetic nanoparticles and amphiphilic random copolymers.
Journal of Separation Science, 41, (2), 578-581, (2018)
   

You B

Zhang XB et al., Hollow porous molecularly imprinted polymer nanosphere for fast and efficient recognition of bisphenol A.
RSC Advances, 2, (26), 9778-9780, (2012)
   

You HY

Wang XR et al., An Ion Imprinted Polymers Grafted Paper-based Fluorescent Sensor Based on Quantum Dots for Detection of Cu2+ Ions.
Chinese Journal of Analytical Chemistry, 43, (10), 1499-1504, (2015)
   

Wu XQ et al., Molecularly imprinted polymers-coated gold nanoclusters for fluorescent detection of bisphenol A.
Sensors and Actuators B: Chemical, 211, 507-514, (2015)
   

Wu XQ et al., Water-compatible temperature and magnetic dual-responsive molecularly imprinted polymers for recognition and extraction of bisphenol A.
Journal of Chromatography A, 1435, 30-38, (2016)
   

You HZ

Zhang XX et al., Synthesis and Application of Molecularly Imprinted Polymer.
Guangzhou Chemical Industry, 40, (9), 6-10, (2012)
   

You J

You J et al., Molecular Imprinted Polymer Used as An Additive for High Performance Capillary Electrophoresis.
Journal of Instrumental Analysis, 20, (1), 19-22, (2001)
   

You J et al., A study of molecular imprinted polymer as the adsorbent in the clean-up step after supercritical fluid extraction.
Chinese Journal of Analytical Chemistry, 30, (5), 518-521, (2002)
   

Yang LY et al., A Study of Preparation and Performance of a Dichlorvos Electrochemical Sensor Based on Molecularly Imprinted Technique.
Analytical Letters, 45, (9), 1036-1044, (2012)
   

Su LQ et al., Applications of the malachite green imprinted material prepared by RAFT radical precipitation polymerization.
Chinese Journal of Analysis Laboratory, 36, (8), 938-942, (2017)
   

You JM

Cai XQ et al., Chemodosimeter-based fluorescent detection of l-cysteine after extracted by molecularly imprinted polymers.
Talanta, 120, 297-303, (2014)
   

Zheng LF et al., Core-shell magnetic molecularly imprinted polymers used rhodamine B hydroxyproline derivate as template combined with in situ derivatization for the specific measurement of L-hydroxyproline.
Journal of Chromatography A, 1532, 30-39, (2018)
   

You LN

Fan WY et al., Water-compatible graphene oxide/molecularly imprinted polymer coated stir bar sorptive extraction of propranolol from urine samples followed by high performance liquid chromatography-ultraviolet detection.
Journal of Chromatography A, 1443, 1-9, (2016)
   

You LQ

He J et al., Preparation and evaluation of molecularly imprinted microspheres for solid-phase extraction of 1, 4-hydroxybenzoic acid esters in soy.
Journal of Separation Science, 34, (19), 2739-2744, (2011)
   

He J et al., Fragment-imprinted microspheres for the extraction of sulfonamides.
Microchimica Acta, 180, (9-10), 903-910, (2013)
   

He J et al., Synthesis of Fragment-Imprinted Microspheres of 2, 6-Dichloropyrimidine as Templates and Determination of Sulfonamides in Milk Samples.
Chromatographia, 76, (15-16), 959-965, (2013)
   

Suo A et al., New methods for preparation of molecularly imprinted polymers and their application in food safety.
Journal of Food Safety and Quality, 5, (11), 3587-3591, (2014)
   

Wu CJ et al., Solid-phase extraction of aflatoxins using a nanosorbent consisting of a magnetized nanoporous carbon core coated with a molecularly imprinted polymer.
Microchimica Acta, 185, (11), ArticleNo515-(2018)
   

Huang ZP et al., Preparation of dummy molecularly imprinted polymers for extraction of Zearalenone in grain samples.
Journal of Chromatography A, 1602, 11-18, (2019)
   

Liang YT et al., An amino-functionalized zirconium-based metal-organic framework of type UiO-66-NH2 covered with a molecularly imprinted polymer as a sorbent for the extraction of aflatoxins AFB1, AFB2, AFG1 and AFG2 from grain.
Microchimica Acta, 187, (1), Article32-(2019)
   

Rui CF et al., Selective extraction and enrichment of aflatoxins from food samples by mesoporous silica FDU-12 supported aflatoxins imprinted polymers based on surface molecularly imprinting technique.
Talanta, 201, 342-349, (2019)
   

Huang ZP et al., Synthesis and application of magnetic-surfaced pseudo molecularly imprinted polymers for zearalenone pretreatment in cereal samples.
Food Chemistry, 308, Article125696-(2020)
   

Wang HG et al., Etching of halloysite nanotubes hollow imprinted materials as adsorbent for extracting of Zearalenone from grain samples.
Microchemical Journal, 157, Article104953-(2020)
   

Zhang YX et al., Application of surface-imprinted polymers supported by hydroxyapatite in the extraction of zearalenone in various cereals.
Analytical and Bioanalytical Chemistry, 412, (17), 4045-4055, (2020)
   

You M

Hao LY et al., Fabrication of ordered macroporous CdS and ZnS by colloidal crystal template.
Chinese Chemical Letters, 13, (2), 181-182, (2002)
   

You M et al., Label-free electrochemical multi-sites recognition of G-rich DNA using multi-walled carbon nanotubes-supported molecularly imprinted polymer with guanine sites of DNA.
Electrochimica Acta, 199, 133-141, (2016)
   

You M et al., Ultrasensitive Electrochemical Detection of Glycoprotein Based on Boronate Affinity Sandwich Assay and Signal Amplification with Functionalized SiO2@Au Nanocomposites.
ACS Applied Materials & Interfaces, 9, (16), 13855-13864, (2017)
   

You M et al., Molecularly imprinted polymers-based electrochemical DNA biosensor for the determination of BRCA-1 amplified by SiO2@Ag.
Biosensors and Bioelectronics, 112, 72-78, (2018)
   

You M et al., A novel electrochemical biosensor with molecularly imprinted polymers and aptamer-based sandwich assay for determining amyloid-[beta] oligomer.
Journal of Electroanalytical Chemistry, 862, Article114017-(2020)
   

You QH

Li Y et al., Protein recognition via surface molecularly imprinted polymer nanowires.
Analytical Chemistry, 78, (1), 317-320, (2006)
   

You QP

Shi SY et al., Selective and simultaneous extraction and determination of hydroxybenzoic acids in aqueous solution by magnetic molecularly imprinted polymers.
Chemical Engineering Journal, 243, 485-493, (2014)
   

You QP et al., Preparation of magnetic dummy molecularly imprinted polymers for selective extraction and analysis of salicylic acid in Actinidia chinensis.
Analytical and Bioanalytical Chemistry, 406, (3), 831-839, (2014)
   

You QP et al., High-capacity thermo-responsive magnetic molecularly imprinted polymers for selective extraction of curcuminoids.
Journal of Chromatography A, 1354, 1-8, (2014)
   

Xie LW et al., Novel molecular imprinted polymers over magnetic mesoporous silica microspheres for selective and efficient determination of protocatechuic acid in Syzygium aromaticum.
Food Chemistry, 178, 18-25, (2015)
   

You S

Tian HJ et al., Rapid and sensitive determination of trace fluoroquinolone antibiotics in milk by molecularly imprinted polymer-coated stainless steel sheet electrospray ionization mass spectrometry.
Talanta, 219, Article121282-(2020)
   

You XX

You XX et al., Analysis of sulfonylurea herbicides in grain samples using molecularly imprinted polymers on the surface of magnetic carbon nanotubes by extraction coupled with HPLC.
Analytical Methods, 8, (5), 1003-1012, (2016)
   

You XX et al., Preparation of a magnetic molecularly imprinted polymer by atom-transfer radical polymerization for the extraction of parabens from fruit juices.
Journal of Separation Science, 39, (14), 2831-2838, (2016)
   

Yang XC et al., Preparation of magnetic imprinted graphene oxide composite for catalytic degradation of Congo red under dark ambient condition.
Water Science & Technology, 76, (7), 1676-1686, (2017)
   

You XX et al., Preparation of magnetic molecularly imprinted polymers by atom transfer radical polymerization for the rapid extraction of avermectin from fish samples.
Journal of Separation Science, 40, (2), 424-430, (2017)
   

You XY

Gong X et al., Synthesis of adenosine-imprinted microspheres for the recognition of ADP-ribosylated proteins.
Biosensors and Bioelectronics, 87, 858-864, (2017)
   

Chen SN et al., High-performance detection of p-nitroaniline on defect-graphene SERS substrate utilizing molecular imprinting technique.
Microchemical Journal, 168, Article106536-(2021)
   

You YJ

Huang HP et al., Determination of clenbuterol hydrochloride with molecularly imprinted solid phase extraction-high performance liquid chromatography in Chuangxiling capsules.
Chinese Journal of Pharmaceutical Analysis, 32, (2), 233-236, (2012)
   

You YZ

Liu J et al., Molecularly Imprinted Polymer Enables High-Efficiency Recognition and Trapping Lithium Polysulfides for Stable Lithium Sulfur Battery.
Nano Letters, 17, (8), 5064-5070, (2017)
   

You ZY

Fu YF et al., Magnetic molecularly imprinting polymers, reduced graphene oxide, and zeolitic imidazolate frameworks modified electrochemical sensor for the selective and sensitive detection of catechin.
Microchimica Acta, 188, (3), Article71-(2021)
   

Youn H

Ma XL et al., Preparation of molecularly imprinted CS membrane for recognizing naringin in aqueous media.
Polymer Bulletin, 66, (6), 853-863, (2011)
   

Youn YN

Byun HS et al., Selective separation of aspirin using molecularly imprinted polymers.
Separation and Purification Technology, 74, (1), 144-153, (2010)
   

Young MC

Basavaraja C et al., Dependence of molecular recognition for a specific cation on the change of the oxidation state of the metal catalyst component in the hydrogel network.
Bulletin of the Korean Chemical Society, 28, (5), 805-810, (2007)
   

Younis MR

Younis MR et al., Molecularly imprinted porous beads for the selective removal of copper ions.
Journal of Separation Science, 39, (4), 793-798, (2016)
   

Yousefi H

Saraji M et al., Selective solid-phase extraction of Ni(II) by an ion-imprinted polymer from water samples.
Journal of Hazardous Materials, 167, (1-3), 1152-1157, (2009)
   

Saraji M et al., Preparation and evaluation of an ion imprinted sol-gel material for selective solid-phase extraction of Ni(II).
International Journal of Environmental Analytical Chemistry, 89, (5), 305-317, (2009)
   

Yousefi N

Etemadi M et al., Selective adsorption of Cr(VI) ions from aqueous solutions using Cr6+-imprinted Pebax/chitosan/GO/APTES nanofibrous adsorbent.
International Journal of Biological Macromolecules, 95, 725-733, (2017)
   

Yousefsani BS

Khansari1 MR et al., Synthesis of Surface Molecularly Imprinting Polymers for Methylphenidate and its Application in Separating Methylphenidate.
Journal of Analytical & Bioanalytical Techniques, 8, (2), ArticleNo351-(2017)
   

Yousefsani BS et al., Liquid Chromatography Analysis of Clozapine in Rat Brain Tissue, Using its Molecularly Imprinted Polymer after Administration of Toxic Dose of Drug and Lipid Emulsion Therapy.
Current Pharmaceutical Analysis, 15, (3), 251-257, (2019)
   

Yousefzadeh A

Yousefzadeh A et al., Surface molecular imprinting and powerfully enhanced chemiluminescence emission by Cu nanoclusters/MOF composite for detection of tramadol.
Sensors and Actuators B: Chemical, 286, 154-162, (2019)
   

Yousefzadeh M

Yousefzadeh A et al., Surface molecular imprinting and powerfully enhanced chemiluminescence emission by Cu nanoclusters/MOF composite for detection of tramadol.
Sensors and Actuators B: Chemical, 286, 154-162, (2019)
   

Youssef HZ

Beckett AH et al., Active sites in stereoselective adsorbents as models of drug receptors and enzyme active sites.
Journal of Pharmacy and Pharmacology, 15, 253T-266T, (1963)
   

Youssef I

Monier M et al., Preparation of ruthenium (III) ion-imprinted beads based on 2-pyridylthiourea modified chitosan.
Journal of Colloid and Interface Science, 513, 266-278, (2018)
   

Monier M et al., Synthesis of imprinted styrene-maleic acid functionalized resin for enantio-selective extraction of R-amphetamine.
Chemical Engineering Journal, 356, 693-701, (2019)
   

Monier M et al., Preparation of functionalized ion-imprinted phenolic polymer for efficient removal of copper ions.
Polymer International, 69, (1), 31-40, (2020)
   

Youssef MA

Abdalla NS et al., All Solid-State Poly (Vinyl Chloride) Membrane Potentiometric Sensor Integrated with Nano-Beads Imprinted Polymers for Sensitive and Rapid Detection of Bispyribac Herbicide as Organic Pollutant.
Molecules, 24, (4), ArticleNo712-(2019)
   

Youwen T

Hu XG et al., Molecularly imprinted polymer coated on stainless steel fiber for solid-phase microextraction of chloroacetanilide herbicides in soybean and corn.
Journal of Chromatography A, 1217, (38), 5875-5882, (2010)
   

Yu A

Zhang J et al., The application of molecular imprinting technique in steroid recognition and analysis.
Chemical Reagents, 27, (6), 331-335, 351, (2005)
   

Wang YJ et al., Specific binding of cholic acid by cross-linked polymers prepared by the hybrid imprinting method.
Polymer, 48, (19), 5565-5571, (2007)
   

Yu AM

Chen LG et al., Fast and Selective Extraction of Sulfonamides from Honey Based on Magnetic Molecularly Imprinted Polymer.
Journal of Agricultural and Food Chemistry, 57, (21), 10073-10080, (2009)
   

Chen LG et al., Preparation of magnetic molecularly imprinted polymer for the separation of tetracycline antibiotics from egg and tissue samples.
Journal of Chromatography A, 1216, (18), 3710-3719, (2009)
   

Chen LG et al., Determination of fluoroquinolone antibiotics in environmental water samples based on magnetic molecularly imprinted polymer extraction followed by liquid chromatography-tandem mass spectrometry.
Analytica Chimica Acta, 662, (1), 31-38, (2010)
   

Yu B

Zhou YX et al., Potentiometric sensing of chiral amino acids.
Chemistry of Materials, 15, (14), 2774-2779, (2003)
   

Zhou YX et al., Chiral surface imprinting: Integrated recognition and transduction.
Abstracts of Papers of the American Chemical Society, 225, (ANYL), 132-132, (2003)
   

Zhou YX et al., Chiral surface imprinting: Integrated recognition and transduction.
Abstracts of Papers of the American Chemical Society, 225, (COLL), 495-495, (2003)
   

Zhou YX et al., Surface imprinted polymer for development of a sensor for methylphosphonic acid: A degradation product of chemical warfare agents.
Abstracts of Papers of the American Chemical Society, 227, (COLL), 531-531, (2004)
   

Zhou YX et al., Potentiometric sensing of chemical warfare agents: Surface imprinted polymer integrated with an indium tin oxide electrode.
Analytical Chemistry, 76, (10), 2689-2693, (2004)
   

Zhou YX et al., Is it possible to construct molecular cavities on surface by SAM? Surface imprinted polymers (SIPs) for next generation sensor development.
Abstracts of Papers of the American Chemical Society, 230, 238-COLL, (2005)
   

Zhou YX et al., Potentiometric sensor for dipicolinic acid.
Biosensors and Bioelectronics, 20, (9), 1851-1855, (2005)
   

Zhou YX et al., Chemical and biological agent sensor development based on surface imprinted polysiloxane.
Abstracts of Papers of the American Chemical Society, 230, 4-MACR, (2005)
   

Zhou YX et al., Chiral surface imprinting: Integrated recognition and transduction.
Abstracts of Papers of the American Chemical Society, ANYL, (225), 132-132, (2006)
   

Jin GP et al., Extremely sensitive electrode for melamine using a kind of molecularly imprinted nano-porous film.
Microchimica Acta, 174, (3), 265-271, (2011)
   

Zhao C et al., Preparation of molecular imprinted film based on chitosan/nafion/nano-silver/poly quercetin for clenbuterol sensing.
Food Chemistry, 129, (2), 595-600, (2011)
   

Zhao C et al., Preparation of Electrochemical Sensor Modified by Molecularly Imprinted Nano-porous Film for Melamine Determination.
Food Science, 33, (4), 214-218, (2012)
   

Yuan H et al., The Fabrication and Application of Bio-Functional Microspheres.
Current Organic Chemistry, 18, (17), 2270-2279, (2014)
   

Li Z et al., Recent development and application of solid phase extraction materials.
Reviews on Advanced Materials Science, 49, (1), 87-111, (2017)
   

Yu BB

Zhang MS et al., Study of Preparation and Binding Characteristics of Molecularly Imprinted Polymers for 1-(2-Pyridylazo)-2-naphthol.
Journal of Analytical Science, 23, (6), 655-659, (2007)
   

Yu BF

Zhao XX et al., Effects of zinc ion on the selectivity and template removal of molecularly imprinted polymers for sulfadiazine.
Analytical Methods, 6, (19), 8059-8062, (2014)
   

Guan XJ et al., Preparation of temperature sensitive molecularly imprinted polymer coatings on nickel foam for determination of ofloxacin in Yellow River water by solid-phase microextraction.
RSC Advances, 5, (111), 91716-91722, (2015)
   

Yu BQ

Cao XW et al., Improving esterification activity of Burkholderia cepacia lipase encapsulated in silica by bioimprinting with substrate analogues.
Process Biochemistry, 44, (2), 177-182, (2009)
   

Feng XX et al., Hydrophilic surface molecularly imprinted naringin prepared via reverse atom transfer radical polymerization with excellent recognition ability in a pure aqueous phase.
RSC Advances, 7, (45), 28082-28091, (2017)
   

Yu BY

Yu BY et al., Effect of the template molecules and nonsolvent additives on the recognition property of molecular imprinted polyethersulfone particles.
Journal of Applied Polymer Science, 108, (6), 3859-3866, (2008)
   

Zhao CS et al., BPA transfer rate increase using molecular imprinted polyethersulfone hollow fiber membrane.
Journal of Membrane Science, 310, (1-2), 38-43, (2008)
   

Yang KG et al., Molecularly imprinted porous polysulfone particles for the binding and recognition of bisphenol A.
Desalination, 245, (1-3), 232-245, (2009)
   

Yu C

Ramström O et al., Chiral recognition in adrenergic receptor binding mimics prepared by molecular imprinting.
Journal of Molecular Recognition, 9, (5-6), 691-696, (1996)
   

Yu C et al., Molecular imprinting utilizing an amide functional group for hydrogen bonding leading to highly efficient polymers.
Journal of Organic Chemistry, 62, (12), 4057-4064, (1997)
   

Yu C et al., Enantiomeric recognition by molecularly imprinted polymers using hydrophobic interactions.
Analytical Letters, 30, (12), 2123-2140, (1997)
   

Ramström O et al., Book chapter, Recent advances in the use of molecularly imprinted materials in separation and synthesis, 
In: Molecular and Ionic Recognition with Imprinted Polymers, Bartsch RA, Maeda M (Eds.) The American Chemical Society: Washington DC, Ch. 5, 82-89, (1998)
   

Yu C et al., Insights into the origins of binding and the recognition properties of molecularly imprinted polymers prepared using an amide as the hydrogen-bonding functional group.
Journal of Molecular Recognition, 11, (1-6), 69-74, (1998)
   

Yu C et al., Influence of mobile phase composition and cross-linking density on the enantiomeric recognition properties of molecularly imprinted polymers.
Journal of Chromatography A, 888, (1-2), 63-72, (2000)
   

Luo W et al., Synthesis of surface molecularly imprinted silica micro-particles in aqueous solution and the usage for selective off-line solid-phase extraction of 2, 4-dinitrophenol from water matrixes.
Analytica Chimica Acta, 618, (2), 147-156, (2008)
   

Li Y et al., Separation and enrichment of trace ractopamine in biological samples by uniformly-sized molecularly imprinted polymers.
Journal of Pharmaceutical Analysis, 2, (6), 395-402, (2012)
   

Tang HQ et al., Selective photocatalysis mediated by magnetic molecularly imprinted polymers.
Separation and Purification Technology, 95, (1), 165-171, (2012)
   

Lu J et al., Antibacterial, high-flux and 3D porous molecularly imprinted nanocomposite sponge membranes for cross-flow filtration of emodin from analogues.
Chemical Engineering Journal, 360, 483-493, (2019)
   

Dong ZQ et al., Antifouling molecularly imprinted membranes for pretreatment of milk samples: Selective separation and detection of lincomycin.
Food Chemistry, 333, Article127477-(2020)
   

Xing WD et al., Biomass Activated Carbon/SiO2-Based Imprinted Membranes for Selective Separation of Atrazine: A Synergistic Integration System.
ACS Sustainable Chemistry & Engineering, 8, (14), 5636-5647, (2020)
   

Xing WD et al., Novel Molecular Organic Framework Composite Molecularly Imprinted Nanofibrous Membranes with a Bioinspired Viscid Bead Structure for Selective Recognition and Separation of Atrazine.
ACS Applied Materials & Interfaces, 13, (24), 28749-28763, (2021)
   

Chen MN et al., Design of self-cleaning molecularly imprinted membrane with antibacterial ability for high-selectively separation of ribavirin.
Journal of Membrane Science, 642, Article119994-(2022)
   

Wen YL et al., Bionic receptor for atherosclerosis therapy: Molecularly imprinted polymers mediate unique cholesterol efflux and inhibit inflammation.
Chemical Engineering Journal, 430, Article132870-(2022)
   

Xing WD et al., Metal-organic framework based molecularly imprinted nanofiber membranes with enhanced selective recognition and separation performance: A multiple strengthening system.
Separation and Purification Technology, 278, Article119624-(2022)
   

Yu C et al., Tailor-made double-face imprinted membrane with ultra-high specific surface area asymmetric structure through a connective method of dip-coating and delayed phase inversion for selective adsorption of cadmium ion.
Separation and Purification Technology, 280, Article119865-(2022)
   

Yu CF

Qian T et al., Ultrasensitive dopamine sensor based on novel molecularly imprinted polypyrrole coated carbon nanotubes.
Biosensors and Bioelectronics, 58, 237-241, (2014)
   

Zhou X et al., Facile Synthesis of Molecularly Imprinted Graphene Quantum Dots for the Determination of Dopamine with Affinity-Adjustable.
ACS Applied Materials & Interfaces, 7, (22), 11741-11747, (2015)
   

Yu CH

Mo GC et al., A novel ECL sensor based on a boronate affinity molecular imprinting technique and functionalized SiO2@CQDs/AuNPs/MPBA nanocomposites for sensitive determination of alpha-fetoprotein.
Biosensors and Bioelectronics, 126, 558-564, (2019)
   

Yu CH et al., A sensitive molecularly imprinted electrochemical aptasensor for highly specific determination of melamine.
Food Chemistry, 363, Article130202-(2021)
   

Yu CS

Yang XC et al., Preparation of magnetic imprinted graphene oxide composite for catalytic degradation of Congo red under dark ambient condition.
Water Science & Technology, 76, (7), 1676-1686, (2017)
   

Yu CW

Lu HZ et al., A dual reference ion-imprinted ratiometric fluorescence probe for simultaneous detection of silver (I) and lead (II).
Sensors and Actuators B: Chemical, 288, 691-698, (2019)
   

Yu CY

Yu CY et al., Separation of Phthalocyanine-like Substances from Humic Acids Using a Molecular Imprinting Method and Their Photochemical Activity under Simulated Sunlight Irradiation.
Journal of Agricultural and Food Chemistry, 57, (15), 6927-6931, (2009)
   

Yu CY et al., Photochemical Effect of Humic Acid Components Separated Using Molecular Imprinting Method Applying Porphyrin-like Substances as Templates in Aqueous Solution.
Environmental Science & Technology, 44, (15), 5812-5817, (2010)
   

Ou XX et al., Separation of photosensitive substances in humic acids using molecular imprinting method based on electrostatic interactions and hydrogen bond.
Journal of Physics: Conference Series, 418, (1), Art. No. 012076-(2013)
   

Yu D

Lei QF et al., Molecular recognition characteristics and solid-phase extraction in epigallocatechin gallate imprinted polymer.
Chinese Journal of Analytical Chemistry, 33, (6), 857-860, (2005)
   

Xu SX et al., Microwave-assisted preparation of monolithic molecularly imprinted polymeric fibers for solid phase microextraction.
Analyst, 138, (10), 2982-2987, (2013)
   

Liu XY et al., Preparation of a magnetic molecularly imprinted polymer for selective recognition of rhodamine B.
Applied Surface Science, 320, 138-145, (2014)
   

Yu D et al., Dummy molecularly imprinted mesoporous silica prepared by hybrid imprinting method for solid-phase extraction of bisphenol A.
Journal of Chromatography A, 1396, 17-24, (2015)
   

Yu DH

Kirk C et al., Aqueous batch rebinding and selectivity studies on sucrose imprinted polymers.
Biosensors and Bioelectronics, 25, (3), 623-628, (2009)
   

Burri HVR et al., An Assay Study of Molecular Recognition of Amino Acids in Water: Covalent Imprinting of Cysteine.
Journal of Biomedical Science and Engineering, 8, (12), 805-814, (2015)
   

Burri HVR et al., Covalent Imprinting and Covalent Rebinding of Benzyl Mercaptan: Towards a Facile Detection of Proteins.
Analytical Letters, 50, (5), 866-876, (2017)
   

Yu DJ

Yu DJ et al., A novel electrochemical sensor for determination of dopamine based on AuNPs@SiO2 core-shell imprinted composite.
Biosensors and Bioelectronics, 38, (1), 270-277, (2012)
   

Zhang D et al., A molecularly imprinted polymer based on functionalized multiwalled carbon nanotubes for the electrochemical detection of parathion-methyl.
Analyst, 137, (11), 2629-2636, (2012)
   

Yu DM

Hou HB et al., Preparation and Properties of Ion-Imprinted Hollow Particles for the Selective Adsorption of Silver Ions.
Langmuir, 31, (4), 1376-1384, (2015)
   

Yu F

Ge SG et al., Layer-by-layer self-assembly CdTe quantum dots and molecularly imprinted polymers modified chemiluminescence sensor for deltamethrin detection.
Sensors and Actuators B: Chemical, 156, (1), 222-227, (2011)
   

Li YC et al., Novel Electrochemical Sensing Platform Based on a Molecularly Imprinted Polymer Decorated 3D Nanoporous Nickel Skeleton for Ultrasensitive and Selective Determination of Metronidazole.
ACS Applied Materials & Interfaces, 7, (28), 15474-15480, (2015)
   

Liu Y et al., Fabrication of highly sensitive and selective electrochemical sensor by using optimized molecularly imprinted polymers on multi-walled carbon nanotubes for metronidazole measurement.
Sensors and Actuators B: Chemical, 206, 647-652, (2015)
   

Li YC et al., Fabrication of ultra-sensitive and selective dopamine electrochemical sensor based on molecularly imprinted polymer modified graphene@carbon nanotube foam.
Electrochemistry Communications, 64, 42-45, (2016)
   

Song H et al., Molecularly imprinted polymer functionalized nanoporous Au-Ag alloy microrod: Novel supportless electrochemical platform for ultrasensitive and selective sensing of metronidazole.
Electrochimica Acta, 208, 10-16, (2016)
   

Zhang JJ et al., Voltammetric lidocaine sensor by using a glassy carbon electrode modified with porous carbon prepared from a MOF, and with a molecularly imprinted polymer.
Microchimica Acta, 185, (1), ArticleNo78-(2018)
   

Wei YB et al., Self-cleaning electrochemical protein-imprinting biosensor with a dual-driven switchable affinity for sensing bovine serum albumin.
Talanta, 237, Article122893-(2022)
   

Yu FF

Zhang C et al., Development of a biomimetic enzyme-linked immunosorbent assay based on molecularly imprinted polymers on paper for the detection of carbaryl.
Food Chemistry, 240, 893-897, (2018)
   

Zhang C et al., Preparation of dummy molecularly imprinted polymers based on dextran-modified magnetic nanoparticles Fe3O4 for the selective detection of acrylamide in potato chips.
Food Chemistry, 317, Article126431-(2020)
   

Yu FS

Yu FS et al., Molecular Imprinting-Chemiluminescence Sensor for the Determination of Prulifloxacin.
Analytical Letters, 42, (2), 381-392, (2009)
   

Yu G

Svec F et al., Monolithic stationary phases for capillary electrochromatography based on synthetic polymers: Designs and applications.
HRC - Journal of High Resolution Chromatography, 23, (1), 3-18, (2000)
   

Yu Q et al., Selective removal of perfluorooctane sulfonate from aqueous solution using chitosan-based molecularly imprinted polymer adsorbents.
Water Research, 42, (12), 3089-3097, (2008)
   

Deng SB et al., Selective sorption of perfluorooctane sulfonate on molecularly imprinted polymer adsorbents.
Frontiers of Environmental Science & Engineering in China, 3, (2), 171-177, (2009)
   

Du ZW et al., Adsorption behavior and mechanism of perfluorinated compounds on various adsorbents - A review.
Journal of Hazardous Materials, 274, 443-454, (2014)
   

Yu GB

Chen K et al., Application and rheology of anisotropic particle stabilized emulsions: Effects of particle hydrophobicity and fractal structure.
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 524, 8-16, (2017)
   

Yu GG

Sai N et al., An imprinted crystalline colloidal array chemical-sensing material for detection of trace diethylstilbestrol.
Analyst, 138, (9), 2720-2728, (2013)
   

Sai N et al., A novel enrichment imprinted crystalline colloidal array for the ultratrace detection of chloramphenicol.
Talanta, 161, 1-7, (2016)
   

Sai N et al., A novel photonic sensor for the detection of chloramphenicol.
Arabian Journal of Chemistry, 12, (8), 4398-4406, (2019)
   

Yu GL

Liu BJ et al., Removal of Pb(II) from aqueous solution using dithiocarbamate modified chitosan beads with Pb(II) as imprinted ions.
Chemical Engineering Journal, 220, 412-419, (2013)
   

Liu BJ et al., Adsorption of heavy metal ions, dyes and proteins by chitosan composites and derivatives - A review.
Journal of Ocean University of China, 12, (3), 500-508, (2013)
   

Liu BJ et al., Biosorption of lead from aqueous solutions by ion-imprinted tetraethylenepentamine modified chitosan beads.
International Journal of Biological Macromolecules, 86, 562-569, (2016)
   

Shi H et al., Molecularly imprinted mesoporous silica incorporating C3N4 dots and CdTe quantum dots as ratiometric fluorescent probe for determination of Malachite Green.
Microchimica Acta, 186, (8), Article556-(2019)
   

Yu H

Fu GQ et al., Bovine serum albumin-imprinted polymer gels prepared by graft copolymerization of acrylamide on chitosan.
Reactive and Functional Polymers, 67, (5), 442-450, (2007)
   

Fu GQ et al., Imprinting effect of protein-imprinted polymers composed of chitosan and polyacrylamide: A re-examination.
Biomaterials, 29, (13), 2138-2142, (2008)
   

Chen ZB et al., Preparation of Quercetin Molecularly Imprinted Polymers.
Designed Monomers & Polymers, 15, (1), 93-111, (2012)
   

Fu Y et al., Preparation and adsorption selectivity of rutin molecularly imprinted polymers.
Journal of Applied Polymer Science, 123, (2), 903-912, (2012)
   

Yu H et al., Synthesis and optimization of molecularly imprinted polymers for quercetin.
Polymer International, 61, (6), 1002-1009, (2012)
   

Liu XJ et al., Preparation and Selectivity Evaluation of Glutathione Molecularly Imprinted Polymers from Aqueous Media.
Industrial & Engineering Chemistry Research, 53, (41), 16082-16090, (2014)
   

Du JJ et al., Selective extraction of dimethoate from cucumber samples by use of molecularly imprinted microspheres.
Journal of Pharmaceutical Analysis, 5, (3), 200-206, (2015)
   

Tan L et al., Highly sensitive determination of amanita toxins in biological samples using [beta]-cyclodextrin collaborated molecularly imprinted polymers coupled with ultra-high performance liquid chromatography tandem mass spectrometry.
Journal of Chromatography A, 1630, Article461514-(2020)
   

Chen W et al., Molecularly imprinted colloidal array with multi-boronic acid sites for glycoprotein detection under neutral pH.
Journal of Colloid and Interface Science, 607, 1163-1172, (2022)
   

Yu HC

Huang XY et al., Preparation and properties of an electrochemical sensor based on molecular imprinted polymer for phenobarbital detection.
Chinese Journal of Analysis Laboratory, 33, (5), 550-554, (2014)
   

Huang XY et al., Preparation and Application of Novel Amobarbital Electrochemical Sensor Based on CuO Nanoparticles Modified Glassy Carbon.
Chemical Journal of Chinese Universities-Chinese, 35, (10), 2078-2084, (2014)
   

Yu HC et al., Preparation and Recognition Properties of CuO Nanoparticles Doping Molecularly Imprinted Polymer Sensor for Phenobarbital.
Chinese Journal of Analytical Chemistry, 42, (11), 1661-1666, (2014)
   

Yu HC et al., Preparation and Application of Phenobarbital Electrochemical Sensor Based on Molecular Imprinted Technique and Electropolymerization Membrane.
Journal of Instrumental Analysis, 33, (7), 752-757, (2014)
   

Yu HC et al., Molecularly imprinted electrochemical sensor based on nickel nanoparticle-modified electrodes for phenobarbital determination.
Electrochimica Acta, 141, 45-50, (2014)
   

Yu HC et al., Preparation and Electrochemical Properties of Phenobarbital Molecularly Imprinted Polymer Sensor Based on CuO Nanoparticle-modified Glassy Carbon Electrode.
Acta Physico-Chimica Sinica, 30, (11), 2085-2091, (2014)
   

Hu Q et al., Molecularly imprinted electrochemical sensor based on a graphene doping gold nanoparticles modified electrode for the determination of metolcarb.
Chinese Journal of Analysis Laboratory, 34, (3), 249-254, (2015)
   

Hu Q et al., Preparation of Molecularly Imprinted Electrochemical Sensor for Detection of 3, 5-Xylyl Methylcarbamate Based on Gold Nanoparticles dopped Graphene Modified Glassy Carbon Electrode.
Journal of Instrumental Analysis, 34, (3), 328-334, (2015)
   

Tan XC et al., An electrochemical sensor for the determination of phoxim based on a graphene modified electrode and molecularly imprinted polymer.
Analytical Methods, 7, (11), 4786-4792, (2015)
   

Tan XC et al., Electrochemical sensor based on molecularly imprinted polymer reduced graphene oxide and gold nanoparticles modified electrode for detection of carbofuran.
Sensors and Actuators B: Chemical, 220, 216-221, (2015)
   

Tan XC et al., Electrochemical Sensor for Determination of Chlorpyrifos Based on Graphene Modified Electrode and Molecularly Imprinted Polymer.
Chinese Journal of Analytical Chemistry, 43, (3), 387-393, (2015)
   

Hu Q et al., The Preparation and Application of Nitrofurantoin Molecular-Imprinted Electrochemical Sensor Based on Glassy Carbon Electrode.
Journal of Analytical Science, 32, (1), 63-66, (2016)
   

Li HJ et al., Hydrophilic modification of PVDF-based SERS imprinted membrane for the selective detection of L-tyrosine.
Journal of Environmental Management, 304, Article114260-(2022)
   

Yu HF

Liu GD et al., Utilization of synergetic effect of weak interactions in the design of polymeric sorbents with high sorption selectivity.
Journal of Chromatography A, 952, (1-2), 71-78, (2002)
   

Wan YC et al., Rapid determination of neomycin in biological samples using fluorescent sensor based on quantum dots with doubly selective binding sites.
Journal of Pharmaceutical and Biomedical Analysis, 154, 75-84, (2018)
   

Yu HL

Liu GY et al., Competitive fluorescence assay for specific recognition of atrazine by magnetic molecularly imprinted polymer based on Fe3O4-chitosan.
Carbohydrate Polymers, 137, 75-81, (2016)
   

Yu HL et al., Materials Established for Enantioselective Release of Chiral Compounds.
Industrial & Engineering Chemistry Research, 55, (21), 6037-6048, (2016)
   

Zheng LF et al., Fabrication of a highly sensitive electrochemical sensor based on electropolymerized molecularly imprinted polymer hybrid nanocomposites for the determination of 4-nonylphenol in packaged milk samples.
Analytical Biochemistry, 559, 44-50, (2018)
   

Tan SJ et al., A dummy molecularly imprinted solid-phase extraction coupled with liquid chromatography-tandem mass spectrometry for selective determination of four pyridine carboxylic acid herbicides in milk.
Journal of Chromatography B, 1108, 65-72, (2019)
   

Yu HL et al., Preparation of molecularly imprinted polymers coupled with high-performance liquid chromatography for the selective extraction of salidroside from Rhodiola crenulata.
Journal of Chromatography B, 1118-1119, 180-186, (2019)
   

Yu HM

Sun RF et al., Construction and application of a stoichiometric displacement model for retention in chiral recognition of molecular imprinting.
Journal of Chromatography A, 1055, (1-2), 1-9, (2004)
   

Sun RF et al., Thermodynamic study on chiral separation process using molecular imprinting.
Acta Chimica Sinica, 63, (3), 189-195, (2005)
   

Sun RF et al., Preparation of molecularly imprinted polymers and studies on their pore-structure.
Acta Polymerica Sinica, (2), 248-253, (2005)
   

Sun RF et al., Preparation and specific molecular recognition properties of human hemoglobin imprinted polymers.
The Chinese Journal of Process Engineering, 5, (3), 341-344, (2005)
   

Yu HN

Wang ZC et al., Preparation of Capsaicin Molecular Imprinting Polymers and Application to Solid Phase Extraction.
Food Science, 34, (12), 45-50, (2013)
   

Lay S et al., Molecularly imprinted polymers as the extracted sorbents of clenbuterol ahead of liquid chromatographic determination.
Journal of Zhejiang University SCIENCE B, 17, (6), 465-475, (2016)
   

Lay S et al., State-of-the-art applications of cyclodextrins as functional monomers in molecular imprinting techniques: a review.
Journal of Separation Science, 39, (12), 2321-2331, (2016)
   

He CZJ et al., Synthesis and application of selective adsorbent for pirimicarb pesticides in aqueous media using allyl-[beta]-cyclodextrin based binary functional monomers.
Journal of the Science of Food and Agriculture, 98, (6), 2089-2097, (2017)
   

Yao R et al., Preparation and evaluation of molecularly imprinted membrane of teicoplanin.
Analytical Methods, 10, (45), 5416-5422, (2018)
   

Yu HN et al., Development of a novel assay of molecularly imprinted membrane by design-based gaussian pattern for vancomycin determination.
Journal of Pharmaceutical and Biomedical Analysis, 175, Article112789-(2019)
   

Yu HP

Zhang XY et al., Solid phase extraction of food contaminants using molecular imprinted polymers.
Science and Technology of Food Industry, 30, (1), 341-344, (2009)
   

Yu HQ

Wang XH et al., Preparation and Application of Molecularly Imprinted Polymers.
Shanghai Plastics, (3), 1-4, (2011)
   

Wang XH et al., Preparation and characterization of the luteolin molecular imprinted polymer.
China Synthetic Resin and Plastics, 29, (4), 25-29, (2012)
   

Pei DN et al., Electrochemical Sensing of Bisphenol A on Facet-Tailored TiO2 Single Crystals Engineered by Inorganic-Framework Molecular Imprinting Sites.
Analytical Chemistry, 90, (5), 3165-3173, (2018)
   

Si Y et al., Photo-assisted electrochemical detection of bisphenol A in water samples by renewable {001}-exposed TiO2 single crystals.
Water Research, 157, 30-39, (2019)
   

Yu HT

Dasary S et al., Terbium complex fluorescence quenching based detection of organophosphates using molecularly imprinted polymer microbeads.
Abstracts of Papers of the American Chemical Society, 236, (INOR), 517-(2008)
   

Dasary S et al., Fluorescence quenching of lanthanide complexes with nerve agent imprinted polymer microbeads for sensor application.
Abstracts of Papers of the American Chemical Society, 236, (INOR), 224-(2008)
   

Saloni J et al., Molecularly imprinted polymers for detection of explosives: computational study on molecular interactions of 2, 6-dinitrotoluene and methacrylic acid complex.
Structural Chemistry, 21, (6), 1171-1184, (2010)
   

Saloni J et al., Theoretical study of molecular interactions of TNT, acrylic acid, and ethylene glycol dimethacrylate - Elements of molecularly imprinted polymer modeling process.
Polymer, 52, (4), 1206-1216, (2011)
   

Zhao HM et al., Selectively Electrochemical Determination of Chloramphenicol in Aqueous Solution Using Molecularly Imprinted Polymer-Carbon Nanotubes-Gold Nanoparticles Modified Electrode.
Journal of The Electrochemical Society, 159, (6), J231-J236, (2012)
   

Zhao Y et al., An electrochemical sensor for selective determination of sulfamethoxazole in surface water using a molecularly imprinted polymer modified BDD electrode.
Analytical Methods, 7, (6), 2693-2698, (2015)
   

Yu HW

Shen XT et al., Enhanced Photocatalytic Degradation and Selective Removal of Nitrophenols by Using Surface Molecular Imprinted Titania.
Environmental Science & Technology, 42, (5), 1687-1692, (2008)
   

Shen XT et al., Selective photocatalysis on molecular imprinted TiO2 thin films prepared via an improved liquid phase deposition method.
New Journal of Chemistry, 33, (8), 1673-1679, (2009)
   

Feng XB et al., A novel dual-template molecularly imprinted electrochemiluminescence immunosensor array using Ru(bpy)32+-Silica@Poly-L-lysine-Au composite nanoparticles as labels for near-simultaneous detection of tumor markers.
Electrochimica Acta, 139, 127-136, (2014)
   

Yu HX

Liu XH et al., Research and development of molecular imprinting technique in the environmental monitoring field.
Energy Environmental Protection, 19, (1), 1-4, (2005)
   

Gong CB et al., The Fabrication of a Photoresponsive Molecularly Imprinted Polymer for the Photoregulated Uptake and Release of Caffeine.
Advanced Functional Materials, 16, (13), 1759-1767, (2006)
   

Liu J et al., The Research of Fluorescent Sensing to Endocrine Disruptor 17[beta]-Estradiol Measured by Microsphere Molecularly Imprinted Polymer.
Research of Environmental Sciences, 19, (5), 91-95, (2006)
   

Yang BX et al., The Preparation of Bisphenol A Molecularly Imprinted Polymers and Its Pilot Application in Environmental Monitoring.
Henan Science, 25, (6), 1047-1051, (2007)
   

Yang BX et al., The Synthesis of Bisphenol A Molecularly Imprinted Polymers and Investigation of Its Binding Characteristics.
Journal of Nanjing University (Natural Sciences), 43, (4), 351-357, (2007)
   

Liu J et al., Optimized Conditions for the Synthesized Microsphere Molecularly Imprinted Polymer on 17[beta]-Estradiol.
Journal of Nantong University (Natural Science), 7, (3), 72-74, (2008)
   

Luo W et al., Synthesis of surface molecularly imprinted silica micro-particles in aqueous solution and the usage for selective off-line solid-phase extraction of 2, 4-dinitrophenol from water matrixes.
Analytica Chimica Acta, 618, (2), 147-156, (2008)
   

Li MKY et al., An organically modified silicate molecularly imprinted solid-phase microextraction device for the determination of polybrominated diphenyl ethers.
Analytica Chimica Acta, 633, (2), 197-203, (2009)
   

Yu HY

Luo XB et al., Selective removal Pb(II) ions form wastewater using Pb(II) ion-imprinted polymers with bi-component polymer brushes.
RSC Advances, 7, (42), 25811-25820, (2017)
   

Luo XB et al., Capturing Cadmium(II) Ion from Wastewater Containing Solid Particles and Floccules Using Ion-Imprinted Polymers with Broom Effect.
Industrial & Engineering Chemistry Research, 56, (9), 2350-2358, (2017)
   

Fang LL et al., Highly Selective Adsorption of Antimonite by Novel Imprinted Polymer with Microdomain Confinement Effect.
Journal of Chemical & Engineering Data, 63, (5), 1513-1523, (2018)
   

Fang LL et al., Development of an anion imprinted polymer for high and selective removal of arsenite from wastewater.
Science of The Total Environment, 639, 110-117, (2018)
   

Yu HY et al., Palladium ion-imprinted polymers with PHEMA polymer brushes: Role of grafting polymerization degree in anti-interference.
Chemical Engineering Journal, 359, 176-185, (2019)
   

Yu J

Petrikovics I et al., Determining the biomarker cyanide metabolite 2-aminothiazoline-4-carboxylic acid in mice liver after cyanide exposure.
Toxicology Letters, 196, (Supplement 1), S295-S296, (2010)
   

Liu YS et al., Oriented immobilization of proteins on solid supports for use in biosensors and biochips: a review.
Microchimica Acta, 183, (1), 1-19, (2016)
   

Wang L et al., A novel nanoenzyme based on Fe3O4 nanoparticles@thionine-imprinted polydopamine for electrochemical biosensing.
Sensors and Actuators B: Chemical, 253, 108-114, (2017)
   

Yang XX et al., Screening for the bioactive constituents of traditional Chinese medicines-progress and challenges.
RSC Advances, 7, (6), 3089-3100, (2017)
   

Zhou TY et al., Preparation of magnetic superhydrophilic molecularly imprinted resins for detection of triazines in aqueous samples.
Journal of Chromatography A, 1497, 38-46, (2017)
   

Hao X et al., A novel U(VI)-imprinted graphitic carbon nitride composite for the selective and efficient removal of U(VI) from simulated seawater.
Inorganic Chemistry Frontiers, 5, (9), 2218-2226, (2018)
   

Zhu JH et al., Novel Ion-Imprinted Carbon Material Induced by Hyperaccumulation Pathway for the Selective Capture of Uranium.
ACS Applied Materials & Interfaces, 10, (34), 28877-28886, (2018)
   

Zhai HY et al., Novel coordination imprinted polymer monolithic column applied to the solid-phase extraction of flumequine from fish samples.
Journal of Chromatography B, 1118-1119, 55-62, (2019)
   

Song ML et al., Enzyme-Free Molecularly Imprinted and Graphene-Functionalized Photoelectrochemical Sensor Platform for Pollutants.
ACS Applied Materials & Interfaces, 13, (31), 37212-37222, (2021)
   

Yu JB

Song XL et al., Determination of 16 polycyclic aromatic hydrocarbons in seawater using molecularly imprinted solid-phase extraction coupled with gas chromatography-mass spectrometry.
Talanta, 99, 75-82, (2012)
   

Yu JC

Wang F et al., Hexagonal tungsten trioxide nanorods as a rapid adsorbent for methylene blue.
Separation and Purification Technology, 91, (1), 103-107, (2012)
   

Yu JCC

Yu JCC et al., Interaction of ochratoxin A with molecularly imprinted polypyrrole film on surface plasmon resonance sensor.
Reactive and Functional Polymers, 63, (3), 171-176, (2005)
   

Yu JCC et al., Molecularly-imprinted polypyrrole-modified stainless steel frits for selective solid phase preconcentration of ochratoxin A.
Analytical and Bioanalytical Chemistry, 382, (7), 1534-1540, (2005)
   

Yu JCC et al., Molecularly imprinted polypyrrole modified carbon nanotubes on stainless steel frit for selective micro solid phase pre-concentration of ochratoxin A.
Reactive and Functional Polymers, 66, (7), 702-711, (2006)
   

Wei Y et al., Molecularly Imprinted Solid Phase Extraction in a Syringe Needle Packed with Polypyrrole-encapsulated Carbon Nanotubes for Determination of Ochratoxin A in Red Wine.
Food Science and Technology International, 13, (5), 375-380, (2007)
   

Yu JCC et al., Molecularly imprinted polypyrrole encapsulated carbon nanotubes in stainless steel frit for micro solid phase extraction of estrogenic compounds.
Journal of Nanoscience and Nanotechnology, 7, (9), 3095-3103, (2007)
   

Yu JCC et al., Determination of ochratoxin A in red wines by multiple pulsed elutions from molecularly imprinted polypyrrole.
Food Chemistry, 105, (1), 301-310, (2007)
   

Yu JCC et al., Molecularly imprinted nanomaterials for analytical separation of trace mycotoxins.
Abstracts of Papers of the American Chemical Society, 235, (AGFD), 131-(2008)
   

Yu JCC et al., Book chapter, Molecularly Imprinted Polymer Nanomaterials for Mycotoxin Extraction, 
In: Mycotoxin Prevention and Control in Agriculture, Appell M, Kendra D, Trucksess M (Eds.) American Chemical Society: Washington DC, Ch. 19, 277-292, (2009)
   

Jackson R et al., Molecularly imprinted polymer stir bar sorption extraction and electrospray ionization tandem mass spectrometry for determination of 2-aminothiazoline-4-carboxylic acid as a marker for cyanide exposure in forensic urine analysis.
Analytical Methods, 2, (5), 552-557, (2010)
   

Yu JCC et al., Molecularly Imprinted Polymers for Ochratoxin A Extraction and Analysis.
Toxins, 2, (6), 1536-1553, (2010)
   

Petrikovics I et al., Plasma persistence of 2-aminothiazoline-4-carboxylic acid in rat system determined by liquid chromatography tandem mass spectrometry.
Journal of Chromatography B, 891-892, (1), 81-84, (2012)
   

Yu JF

Zhu C et al., Highly efficient extraction of lead ions from smelting wastewater, slag and contaminated soil by two-dimensional montmorillonite-based surface ion imprinted polymer absorbent.
Chemosphere, 209, 246-257, (2018)
   

Yu JG

Jiao FP et al., Study on Process of Thermodynamics for Chiral Separation of Naproxen in Molecular Imprinting.
Materials Review, 19, (8), 114-116, (2005)
   

Yu JH

Yu JH et al., Hydrolysis of carboxylate ester catalyzed by a new artificial abzyme based on molecularly imprinted polymer.
Progress in Natural Science, 11, (7), 516-519, (2001)
   

Li Y et al., Book chapter, Study of the chiral transference and recognition effect in layered aluminophosphates templated by chiral cobalt complexes, 
In: Frontiers Of Solid State Chemistry, Feng SH, Chen JS (Eds.) World Scientific Publishing Co.: 295-301, (2002)
   

Zuo YJ et al., The preparation of molecularly imprinting nanometer layer and its application in detecting nerve agent sarin.
Chinese Journal of Analytical Chemistry, 31, (7), 769-773, (2003)
   

Zuo YJ et al., The preparation of poly(o-phenylenediamine) sarin acid imprinting nanometer layer and its structural characterization.
Acta Physico-Chimica Sinica, 19, (6), 528-532, (2003)
   

Pan Y et al., Study on the Detection of Dimethylmethylphosphonate by Surface Acoustic Wave-Molecular Imprinting Technology.
Journal of Instrumental Analysis, 24, (4), 42-44, (2005)
   

Yu JH et al., Quantification of fenfluramine with a molecularly imprinted chemiluminescence sensor and sulfonophenylazo rhodanine.
Journal of Separation Science, 32, (12), 2170-2179, (2009)
   

Yu JH et al., Highly selective molecular recognition and high throughput detection of melamine based on molecularly imprinted sol-gel film.
Analytica Chimica Acta, 651, (2), 209-214, (2009)
   

Yu JH et al., Quantification of Sorbic Acid Using the Molecularly Imprinted Chemiluminescence Method with Rhodanine Derivative.
Analytical Sciences, 25, (11), 1351-1356, (2009)
   

Yu JH et al., Flow Injection Chemiluminescence Sensor with Novel Rhodanine Ramification for Determination of Fenfluramine Based on Molecularly Imprinted Polymer.
Analytical Letters, 42, (5), 746-757, (2009)
   

Yu JH et al., Highly selective determination of phenolphthalein by flow injection chemiluminescence method based on a molecular imprinting polymer.
Luminescence, 24, (6), 444-447, (2009)
   

Ge L et al., High selectivity chemiluminescence sensor for determination of puerarin in diet foods/weight loss promoters based on novel rhodanine and monodisperse molecularly imprinted microspheres.
Analytical Methods, 2, (10), 1506-1513, (2010)
   

Ge SG et al., On-line molecular imprinted solid-phase extraction flow-injection fluorescence sensor for determination of florfenicol in animal tissues.
Journal of Pharmaceutical and Biomedical Analysis, 52, (4), 615-619, (2010)
   

Wan FW et al., Molecular Imprinting-Chemiluminescence Sensor for the Determination of Amoxicillin.
Analytical Letters, 43, (6), 1033-1045, (2010)
   

Wan FW et al., A high throughput chemiluminescence method based on molecularly imprinted sol-gel films for determination of sibutramine.
Advanced Materials Letters, 1, (2), 164-169, (2010)
   

Yu JH et al., Molecularly imprinted polymeric microspheres for determination of bovine serum albumin based on flow injection chemiluminescence sensor.
Biosensors and Bioelectronics, 26, (2), 632-637, (2010)
   

Ge SG et al., Proceeding, Synthesis and Application of Molecularly Imprinted Sol-Gel Film for Simultaneous Determination of Multi-Component Pesticide Residue, 
Liu SQ, Zuo M (Eds.), 1667-1672, (2011)
   

Ge SG et al., Layer-by-layer self-assembly CdTe quantum dots and molecularly imprinted polymers modified chemiluminescence sensor for deltamethrin detection.
Sensors and Actuators B: Chemical, 156, (1), 222-227, (2011)
   

Ge SG et al., Development of a novel deltamethrin sensor based on molecularly imprinted silica nanospheres embedded CdTe quantum dots.
Spectrochimica Acta Part A-Molecular and Biomolecular Spctroscopy, 79, (5), 1704-1709, (2011)
   

Zang DJ et al., Proceeding, A High Throughput and High Selective Chemiluminescence Method for Quantification of Bifenthrin Based on Molecularly Imprinted Film, 
Liu SQ, Zuo M (Eds.), 663-666, (2011)
   

Zhao PN et al., A Novel Molecularly Imprinted Core-Shell Chemiluminescence Sensor: Preparation and Pendimethalin Recognition.
Journal of Inorganic and Organometallic Polymers and Materials, 21, (4), 846-851, (2011)
   

Zhao PN et al., Determination of glyphosate in foodstuff by one novel chemiluminescence-molecular imprinting sensor.
Spectrochimica Acta Part A-Molecular and Biomolecular Spctroscopy, 78, (5), 1482-1486, (2011)
   

Gao WQ et al., Electrochemical Sensor for Detection of Trichlorfon Based on Molecularly Imprinted Sol-Gel Films Modified Glassy Carbon Electrode.
Journal of Inorganic and Organometallic Polymers and Materials, 22, (1), 37-41, (2012)
   

Ge SG et al., Multi-branch chemiluminescence-molecular imprinting sensor for sequential determination of carbofuran and omethoate in foodstuff.
Analytical Methods, 4, (10), 3150-3156, (2012)
   

Lian WJ et al., Electrochemical sensor based on gold nanoparticles fabricated molecularly imprinted polymer film at chitosan-platinum nanoparticles/graphene-gold nanoparticles double nanocomposites modified electrode for detection of erythromycin.
Biosensors and Bioelectronics, 38, (1), 163-169, (2012)
   

Lian WJ et al., A molecularly imprinted sensor based on [beta]-cyclodextrin incorporated multiwalled carbon nanotube and gold nanoparticles-polyamide amine dendrimer nanocomposites combining with water-soluble chitosan derivative for the detection of chlortetracycline.
Food Control, 26, (2), 620-627, (2012)
   

Lu JJ et al., Detection of L-phenylalanine using molecularly imprinted solid-phase extraction and flow injection electrochemiluminescence.
Journal of Separation Science, 35, (2), 320-326, (2012)
   

Xing XR et al., Electrochemical sensor based on molecularly imprinted film at polypyrrole-sulfonated graphene/hyaluronic acid-multiwalled carbon nanotubes modified electrode for determination of tryptamine.
Biosensors and Bioelectronics, 31, (1), 277-283, (2012)
   

Yan JX et al., A novel high selectivity sensor for tetradifon residues based on double-side hollow molecularly imprinted materials.
Analytical Methods, 4, (1), 177-182, (2012)
   

Zang DJ et al., A novel high selectivity chemiluminescence sensor for fenvalerate based on double-sided hollow molecularly imprinted materials.
Analyst, 137, (18), 4247-4253, (2012)
   

Zhao PN et al., One novel chemiluminescence sensor for determination of fenpropathrin based on molecularly imprinted porous hollow microspheres.
Sensors and Actuators B: Chemical, 162, (1), 166-172, (2012)
   

Ge L et al., Molecularly Imprinted Polymer Grafted Porous Au-Paper Electrode for an Microfluidic Electro-Analytical Origami Device.
Advanced Functional Materials, 23, (24), 3115-3123, (2013)
   

Lian WJ et al., Determination of Oxytetracycline with a Gold Electrode Modified by Chitosan-Multiwalled Carbon Nanotube Multilayer Films and Gold Nanoparticles.
Analytical Letters, 46, (7), 1117-1131, (2013)
   

Lian WJ et al., Electrochemical sensor using neomycin-imprinted film as recognition element based on chitosan-silver nanoparticles/graphene-multiwalled carbon nanotubes composites modified electrode.
Biosensors and Bioelectronics, 44, 70-76, (2013)
   

Wang PP et al., Visible light photoelectrochemical sensor based on Au nanoparticles and molecularly imprinted poly(o-phenylenediamine)-modified TiO2 nanotubes for specific and sensitive detection chlorpyrifos.
Analyst, 138, (3), 939-945, (2013)
   

Wang PP et al., Photoelectrochemical Sensor Based on Molecularly Imprinted Polymer-Coated TiO2 Nanotubes for Lindane Specific Recognition and Detection.
Journal of Inorganic and Organometallic Polymers and Materials, 23, (3), 703-711, (2013)
   

Wang PP et al., Photoelectrochemical lab-on-paper device based on molecularly imprinted polymer and porous Au-paper electrode.
Analyst, 138, (17), 4802-4811, (2013)
   

Wang SM et al., Molecularly imprinted polymer grafted paper-based multi-disk micro-disk plate for chemiluminescence detection of pesticide.
Biosensors and Bioelectronics, 50, 262-268, (2013)
   

Wang YH et al., A novel microfluidic origami photoelectrochemical sensor based on CdTe quantum dots modified molecularly imprinted polymer and its highly selective detection of S-fenvalerate.
Electrochimica Acta, 107, 147-154, (2013)
   

Zang DJ et al., A disposable simultaneous electrochemical sensor array based on a molecularly imprinted film at a NH2-graphene modified screen-printed electrode for determination of psychotropic drugs.
Analyst, 138, (9), 2704-2711, (2013)
   

Sun GQ et al., Photoelectrochemical sensor for pentachlorophenol on microfluidic paper-based analytical device based on the molecular imprinting technique.
Biosensors and Bioelectronics, 56, 97-103, (2014)
   

Ge SG et al., One novel molecular imprinting nanowires chemiluminescence sensor: preparation and pendimethalin recognition.
Monatshefte für Chemie - Chemical Monthly, 146, (3), 493-499, (2015)
   

Wang YH et al., Paper-based colorimetric analytical device based on molecularly imprinted polymers.
Nanomedicine: Nanotechnology, Biology and Medicine, 12, (2), 534-534, (2016)
   

Gao CM et al., Engineering anatase hierarchically cactus-like TiO2 arrays for photoelectrochemical and visualized sensing platform.
Biosensors and Bioelectronics, 90, 336-342, (2017)
   

Ge SG et al., Nanomaterials-modified cellulose paper as a platform for biosensing applications.
Nanoscale, 9, (13), 4366-4382, (2017)
   

Kong QK et al., A novel microfluidic paper-based colorimetric sensor based on molecularly imprinted polymer membranes for highly selective and sensitive detection of bisphenol A.
Sensors and Actuators B: Chemical, 243, 130-136, (2017)
   

Sun XL et al., Photoelectrochemical sensor based on molecularly imprinted film modified hierarchical branched titanium dioxide nanorods for chlorpyrifos detection.
Sensors and Actuators B: Chemical, 251, 1-8, (2017)
   

Xu JM et al., A molecularly imprinted polypyrrole for ultrasensitive voltammetric determination of glyphosate.
Microchimica Acta, 184, (7), 1959-1967, (2017)
   

Kong QK et al., Highly sensitive microfluidic paper-based photoelectrochemical sensing platform based on reversible photo-oxidation products and morphology-preferable multi-plate ZnO nanoflowers.
Biosensors and Bioelectronics, 110, 58-64, (2018)
   

Sun XL et al., Ultrasensitive Microfluidic Paper-Based Electrochemical Biosensor Based on Molecularly Imprinted Film and Boronate Affinity Sandwich Assay for Glycoprotein Detection.
ACS Applied Materials & Interfaces, 11, (17), 16198-16206, (2019)
   

Zhao PN et al., Paper-Based SERS Sensing Platform Based on 3D Silver Dendrites and Molecularly Imprinted Identifier Sandwich Hybrid for Neonicotinoid Quantification.
ACS Applied Materials & Interfaces, 12, (7), 8845-8854, (2020)
   

Yu JJ

Yu JJ et al., Determination of urinary aromatic amines in smokers and nonsmokers using a MIPs-SPE coupled with LC-MS/MS method.
Journal of Chromatography B, 958, 130-135, (2014)
   

Yu JL

Lu S et al., Selective Nitration of Toluene on Molecular Imprinted Polymers.
Jiangsu Chemical Industry, 33, (z1), 111-112, (2005)
   

Yang YJ et al., Molecularly Imprinted Solid-Phase Extraction for Selective Extraction of Bisphenol Analogues in Beverages and Canned Food.
Journal of Agricultural and Food Chemistry, 62, (46), 11130-11137, (2014)
   

Wang XY et al., A molecular imprinting-based turn-on Ratiometric fluorescence sensor for highly selective and sensitive detection of 2, 4-dichlorophenoxyacetic acid (2, 4-D).
Biosensors and Bioelectronics, 81, 438-444, (2016)
   

Wang XY et al., Molecular imprinting ratiometric fluorescence sensor for highly selective and sensitive detection of phycocyanin.
Biosensors and Bioelectronics, 77, 624-630, (2016)
   

Yu JL et al., One-pot synthesis of a quantum dot-based molecular imprinting nanosensor for highly selective and sensitive fluorescence detection of 4-nitrophenol in environmental waters.
Environmental Science: Nano, 4, (2), 493-502, (2017)
   

Wang XY et al., Quantum dots based imprinting fluorescent nanosensor for the selective and sensitive detection of phycocyanin: A general imprinting strategy toward proteins.
Sensors and Actuators B: Chemical, 255, (Part 1), 268-274, (2018)
   

Wang XY et al., Fluorescent nanosensor designing via hybrid of carbon dots and post-imprinted polymers for the detection of ovalbumin.
Talanta, 211, Article120727-(2020)
   

Yu JP

Zhang YX et al., 13C NMR aided design of molecularly imprinted adsorbents for selectively preparative separation of erythromycin.
Journal of Materials Chemistry B, 2, (10), 1390-1399, (2014)
   

Yu JQ

Xu ZF et al., Study on the preparation and binding properties in aqueous media of Cholic acid imprinted polymers.
Chemical Journal of Chinese Universities, 32, (8), 1727-1732, (2011)
   

Yu JS

Cao H et al., Preparation and adsorption characteristics of malachite green imprinted polymers.
Journal of Sichuan University (Natural Science Edition), 49, (6), 1319-1324, (2012)
   

Cao H et al., Preparation and performance valuation of high selective molecularly imprinted polymers for malachite green.
Research on Chemical Intermediates, 39, (6), 2321-2337, (2013)
   

Zeng HJ et al., A molecule-imprinted polyaniline membrane modified on carbon fiber for detection of glycine.
Bio-Medical Materials and Engineering, 24, (1), 1085-1091, (2014)
   

Ye T et al., Colorimetric detection of pyrethroid metabolite by using surface molecularly imprinted polymer.
Sensors and Actuators B: Chemical, 254, 417-423, (2018)
   

Yang P et al., A novel morphological ion imprinted polymers for selective solid phase extraction of Cd(II): Preparation, adsorption properties and binding mechanism to Cd(II).
Reactive and Functional Polymers, 151, Article104569-(2020)
   

Ye T et al., Core-satellite surface imprinting polymer-based pipette tip solid-phase extraction for the colorimetric determination of pyrethroid metabolite.
Microchimica Acta, 187, (7), Article412-(2020)
   

Yu JW

Wang XY et al., Preparation and Application of the Core-Shell Carbon Nanotubes-Molecularly Imprinted Composite for Chloramphenicols.
Journal of Analytical Science, 32, (6), 758-762, (2016)
   

Wang XY et al., Preparation and Application of Molecularly Imprinted Polymers for Chloramphenicol Based on Ionic Liquids Assistance.
Journal of Instrumental Analysis, 36, (1), 18-24, (2017)
   

Yu JX

Fan JP et al., A molecular imprinted polymer on the surface of superparamagnetic Fe3O4-graphene oxide (MIP@Fe3O4@GO) for simultaneous recognition and enrichment of evodiamine and rutaecarpine in Evodiae fructus.
Journal of Applied Polymer Science, 134, (7), ArticleNo44465-(2017)
   

Fan JP et al., Preparation, characterization, and application of multiple stimuli-responsive rattle-type magnetic hollow molecular imprinted poly (ionic liquids) nanospheres (Fe3O4@void@PILMIP) for specific recognition of protein.
Chemical Engineering Journal, 337, 722-732, (2018)
   

Lin CC et al., Embedded Upconversion Nanoparticles in Magnetic Molecularly Imprinted Polymers for Photodynamic Therapy of Hepatocellular Carcinoma.
Biomedicines, 9, (12), ArticleNo1923-(2021)
   

Gao Y et al., Synthesis of rice husk-based ion-imprinted polymer for selective capturing Cu(II) from aqueous solution and re-use of its waste material in Glaser coupling reaction.
Journal of Hazardous Materials, 424, Article127203-(2022)
   

Yu JY

Xu L et al., Preparation and Absorption Property of Molecularly Imprinted Polymer for Metoprolol.
Journal of Instrumental Analysis, 25, (4), 45-47, 51, (2006)
   

Yu JY et al., Proceeding, Synthesis and properties of molecularly imprinted composite membranes of roxithromycin, 
Ma LX, Wang CS, Yang WM (Eds.), 80-85, (2009)
   

Yu JY et al., Thin layer molecularly imprinted composite membranes for selective separation of erythromycin from water.
Frontiers of Earth Science in China, 3, (4), 480-489, (2009)
   

Jiao CC et al., Preparation and Influence Factors of Composite Molecular Imprinted Membranes.
Chemical Industry and Engineering, 27, (4), 358-364, (2010)
   

Yu JY et al., Proceeding, Molecularly imprinted polymer microspheres prepared by precipitation polymerization for atenolol recognition, 
Liu XH, Jiang ZY, Han JT (Eds.), 1192-1198, (2010)
   

Yu JY et al., Proceeding, Molecularly imprinted polymer microspheres prepared by precipitation polymerization for the binding and recognition of roxithromycin, 
Art. No. 5515319, (2010)
   

Jiao SQ et al., Surface plasmon resonance sensor based on Bi-monomer System (BMS) molecularly imprinted polymer for detection of 17[beta]-estradiol in aqueous media.
IOP Conference Series: Earth and Environmental Science, 295, (3), Article032017-(2019)
   

Yu JY et al., Surface plasmone resonance sensor for biomimetic detection of progesterone with macroporous molecularly imprinted polymers prepared by visible light.
IOP Conference Series: Materials Science and Engineering, 688, Article033032-(2019)
   

Nawaz T et al., The biomimetic detection of progesterone by novel bifunctional group monomer based molecularly imprinted polymers prepared in UV light.
New Journal of Chemistry, 44, (17), 6992-7000, (2020)
   

Nawaz T et al., A recyclable tetracycline imprinted polymeric SPR sensor: in synergy with itaconic acid and methacrylic acid.
New Journal of Chemistry, 45, (6), 3102-3111, (2021)
   

Yu K

Tsukagoshi K et al., Adsorption behavior of metal-ions onto Co(II)-imprinted microspheres prepared by surface imprinting - effect of Co(II)-imprinting.
Kobunshi Ronbunshu, 50, (5), 455-458, (1993)
   

Li LY et al., Rapid extraction of trace bisphenol A in real water samples using hollow mesoporous silica surface dummy molecularly imprinted polymers.
Analytical Methods, 10, (32), 3926-3932, (2018)
   

Tian MJ et al., Fabrication of dual-template molecularly imprinted mesoporous silica for simultaneous rapid and efficient detection of bisphenol A and diethylstilbestrol in environmental water samples.
Analytical Methods, 11, (37), 4761-4768, (2019)
   

Wang YF et al., A versatile strategy to fabricate magnetic dummy molecularly imprinted mesoporous silica particles for specific magnetic separation of bisphenol A.
New Journal of Chemistry, 43, (8), 3400-3408, (2019)
   

Yu KF

Shang JB et al., Preparation and selective adsorption of organic pollutants by an inorganic molecular imprinted polymer.
Water Science And Technology, 74, (5), 1193-1201, (2016)
   

Song YQ et al., Synthesis of an inorganic-framework molecularly imprinted Fe-doped TiO2 composite and its selective photo-Fenton-like degradation of acid orange II.
Journal of Chemical Technology & Biotechnology, 92, (8), 2038-2049, (2017)
   

Song YQ et al., Selective Fenton-like catalytic oxidation of acid orange II on inorganic heterogeneous molecular imprinted catalysts.
Journal of Advanced Oxidation Technologies, 20, (1), ArticleNo20160195-(2017)
   

Zhang YY et al., Selective Fenton-like oxidation of methylene blue on modified Fe-zeolites prepared via molecular imprinting technique.
Water Science And Technology, 75, (3), 659-(2017)
   

Yu KX

Wan FW et al., A high throughput chemiluminescence method based on molecularly imprinted sol-gel films for determination of sibutramine.
Advanced Materials Letters, 1, (2), 164-169, (2010)
   

Yu KY

Yu KY et al., Metal ion-imprinted microspheres prepared by reorganization of the coordinating groups on the surface.
Analytical Sciences, 8, (5), 701-703, (1992)
   

Tsukagoshi K et al., Metal ion-selective adsorbent prepared by surface-imprinting polymerization.
Bulletin of the Chemical Society of Japan, 66, (1), 114-120, (1993)
   

Tsukagoshi K et al., Surface imprinting - characterization of a latex resin and the origin of the imprinting effect.
Bulletin of the Chemical Society of Japan, 68, (11), 3095-3103, (1995)
   

Tsukagoshi K et al., Book chapter, Surface imprinting: Preparation of metal ion-imprinted resins by use of complexation at the aqueous-organic interface, 
In: Molecular and Ionic Recognition with Imprinted Polymers, Bartsch RA, Maeda M (Eds.) The American Chemical Society: Washington DC, Ch. 17, 251-263, (1998)
   

Yu L

Xie ZM et al., Preparation of Oridonin molecularly imprinted polymers and study on its molecular recognition properties.
Chemical Research and Application, 23, (10), 1349-1352, (2011)
   

Zhang YX et al., Highly-sensitive and selective colorimetric sensor for amino acids chiral recognition based on molecularly imprinted photonic polymers.
Sensors and Actuators B: Chemical, 181, 850-857, (2013)
   

Xu WZ et al., Computer-aided design and synthesis of CdTe@SiO2 core-shell molecularly imprinted polymers as a fluorescent sensor for the selective determination of sulfamethoxazole in milk and lake water.
Journal of Separation Science, 40, (5), 1091-1098, (2017)
   

Yu LB

Zhang FS et al., A flexible imprinted photonic resin film templated by nanocrystalline cellulose for naked-eye recognition of sulfonamides.
Journal of Industrial and Engineering Chemistry, 58, 172-178, (2018)
   

Yu LG

Yang YK et al., Fluorometric microplate-based dimethoate assay using CdSe/ZnS quantum dots coated with a molecularly imprinted polymer.
Microchimica Acta, 186, (8), Article589-(2019)
   

Yang YK et al., Magnetic molecularly imprinted electrochemical sensors: A review.
Analytica Chimica Acta, 1106, 1-21, (2020)
   

Yang YK et al., Development of a molecularly imprinted photoelectrochemical sensing platform based on NH2-MIL-125(Ti)-TiO2 composite for the sensitive and selective determination of oxtetracycline.
Biosensors and Bioelectronics, 177, Article113000-(2021)
   

Yang YK et al., Surface molecularly imprinted magnetic MOFs: A novel platform coupled with magneto electrode for high throughput electrochemical sensing analysis of oxytetracycline in foods.
Food Chemistry, 363, Article130337-(2021)
   

Yu LL

Liang YM et al., High sensitive and selective graphene oxide/molecularly imprinted polymer electrochemical sensor for 2, 4-dichlorophenol in water.
Sensors and Actuators B: Chemical, 240, 1330-1335, (2017)
   

Li LQ et al., A sensitive and selective molecularly imprinted electrochemical sensor based on Pd-Cu bimetallic alloy functionalized graphene for detection of amaranth in soft drink.
Talanta, 197, 68-76, (2019)
   

Guo LL et al., A novel molecularly imprinted sensor based on PtCu bimetallic nanoparticle deposited on PSS functionalized graphene with peroxidase-like activity for selective determination of puerarin.
Talanta, 210, Article120621-(2020)
   

Du QZ et al., Surface molecularly imprinted polymers fabricated by differential UV-vis spectra and reverse prediction method for the enrichment and determination of sterigmatocystin.
Food Chemistry, 367, Article130715-(2022)
   

Yu LP

Wang LQ et al., A molecularly imprinted photonic polymer sensor with high selectivity for tetracyclines analysis in food.
Analyst, 137, (15), 3502-3509, (2012)
   

Liu XY et al., Molecularly imprinted photonic polymer based on [beta]-cyclodextrin for amino acid sensing.
Talanta, 116, 283-289, (2013)
   

Zhang YH et al., Development of molecularly imprinted photonic polymers for sensing of sulfonamides in egg white.
Analytical Methods, 10, (1), 101-108, (2018)
   

Yu LZ

Yu LZ et al., Preparation, recognition characteristics and properties for quercetin molecularly imprinted polymers.
Desalination and Water Treatment, 34, (1-3), 309-314, (2011)
   

Yu LZ et al., Preparation and Application for Kaempferol Molecularly-imprinted Polymers.
Chemistry and Industry of Forest Products, 31, (4), 19-24, (2011)
   

Yu M

Huang M et al., Synthesis of Thiophene Molecularly Imprinted Polymer and Its Molecule Recognition Capability.
Journal of Instrumental Analysis, 31, (11), 1401-1405, (2012)
   

Chu HT et al., Preparation and application of methimazole molecularly imprinted polymer based on silver-loaded dendritic fiber-type silica.
RSC Advances, 11, (22), 13446-13457, (2021)
   

Yu MG

Liang WX et al., Functionalization of Molecularly Imprinted Polymer Microspheres for the Highly Selective Removal of Contaminants from Aqueous Solutions and the Analysis of Food-Grade Fish Samples.
Polymers, 10, (10), ArticleNo1130-(2018)
   

Yu MM

Guo JF et al., Preparation of Core-Shell Magnetic Molecularly Imprinted Polymer with Uniform Thin Polymer Layer for Adsorption of Dichlorophen.
Journal of Chemical & Engineering Data, 63, (8), 3068-3073, (2018)
   

Wei X et al., Magnetic nanoparticles coated with a molecularly imprinted polymer doped with manganese-doped ZnS quantum dots for the determination of 2, 4, 6-trichlorophenol.
Microchimica Acta, 185, (4), ArticleNo208-(2018)
   

Wei X et al., A Core-Shell Spherical Silica Molecularly Imprinted Polymer for Efficient Selective Recognition and Adsorption of Dichlorophen.
Fibers and Polymers, 20, (3), 459-465, (2019)
   

Yu MM et al., A descriptive and comparative analysis on the adsorption of PPCPs by molecularly imprinted polymers.
Talanta, 236, Article122875-(2022)
   

Yu MZ

Yu MZ et al., Titanium dioxide and polypyrrole molecularly imprinted polymer nanocomposites based electrochemical sensor for highly selective detection of p-nonylphenol.
Analytica Chimica Acta, 1080, 84-94, (2019)
   

Miao JN et al., Magnetic ferroferric oxide and polydopamine molecularly imprinted polymer nanocomposites based electrochemical impedance sensor for the selective separation and sensitive determination of dichlorodiphenyltrichloroethane (DDT).
Analytica Chimica Acta, 1095, 82-92, (2020)
   

Yu N

Luo QH et al., Surface plasmon resonance sensor for antibiotics detection based on photo-initiated polymerization molecularly imprinted array.
Talanta, 161, 797-803, (2016)
   

Dhanjai et al., A flexible-imprinted capacitive sensor for rapid detection of adrenaline.
Talanta, 204, 602-606, (2019)
   

Yu NX

Peng HL et al., Preparation of photonic-magnetic responsive molecularly imprinted microspheres and their application to fast and selective extraction of 17[beta]-estradiol.
Journal of Chromatography A, 1442, 1-11, (2016)
   

Zhu WT et al., Zipper-like magnetic molecularly imprinted microspheres for on/off-switchable recognition and extraction of 17[beta]-estradiol from food samples.
Food Chemistry, 261, 87-95, (2018)
   

Wen T et al., A nanowell-based molecularly imprinted electrochemical sensor for highly sensitive and selective detection of 17[beta]-estradiol in food samples.
Food Chemistry, 297, Article124968-(2019)
   

Yu P

Zhang MS et al., Preparation and characteristics of protein molecularly imprinted membranes on the surface of multiwalled carbon nanotubes.
Talanta, 81, (1-2), 162-166, (2010)
   

Hang H et al., Selective separation of lambdacyhalothrin by porous/magnetic molecularly imprinted polymers prepared by Pickering emulsion polymerization.
Journal of Separation Science, 36, (19), 3285-3294, (2013)
   

Liu CB et al., Molecular Imprinting in Fluorescent Particle Stabilized Pickering Emulsion for Selective and Sensitive Optosensing of [lambda]-Cyhalothrin.
Journal of Physical Chemistry C, 117, (20), 10445-10453, (2013)
   

Meng MJ et al., Optimization of surface imprinted layer attached poly(vinylidene fluoride) membrane for selective separation of salicylic acid from acetylsalicylic acid using central composite design.
Chemical Engineering Journal, 231, 132-145, (2013)
   

Dai JD et al., Narrowly dispersed imprinted microspheres with hydrophilic polymer brushes for the selective removal of sulfamethazine.
RSC Advances, 4, (4), 1965-1973, (2014)
   

Dai JD et al., Highly-controllable imprinted polymer nanoshell at the surface of magnetic halloysite nanotubes for selective recognition and rapid adsorption of tetracycline.
RSC Advances, 4, (16), 7967-7978, (2014)
   

Liu CB et al., A simple and sensitive surface molecularly imprinted polymers based fluorescence sensor for detection of [lambda]-Cyhalothrin.
Talanta, 125, 14-23, (2014)
   

Wei X et al., Synthesis of molecularly imprinted silica nanospheres embedded mercaptosuccinic acid-coated CdTe quantum dots for selective recognition of [lambda]-cyhalothrin.
Journal of Luminescence, 153, 326-332, (2014)
   

Xie QJ et al., Molecularly imprinted [beta]-cyclodextrin/Kaoline particles for the selective recognition and binding of bisphenol A.
The Canadian Journal of Chemical Engineering, 92, (4), 720-728, (2014)
   

Zhao CY et al., One-pot method for obtaining hydrophilic tetracycline-imprinted particles via precipitation polymerization in ethanol.
Journal of Applied Polymer Science, 131, (7), Article 40071-(2014)
   

Zou YL et al., Magnetic and hydrophilic imprinted particles via ATRP at room temperature for selective separation of sulfamethazine.
Colloid & Polymer Science, 292, (2), 333-342, (2014)
   

Yu P et al., Magnetic imprinted nanomicrosphere attached to the surface of bacillus using miniemulsion polymerization for selective recognition of 2, 4, 6-trichlorophenol from aqueous solutions.
Journal of Industrial and Engineering Chemistry, 29, 349-358, (2015)
   

Yu P et al., Selective removal of 2, 4-dichlorophenol in aqueous solutions by nanoparticles modified yeast using miniemulsion imprinting polymerization.
Journal of Environmental Chemical Engineering, 3, (2), 797-806, (2015)
   

Yu P et al., Preparation and characterization of molecularly-imprinted magnetic microspheres for adsorption of 2, 4, 6-trichlorophenol from aqueous solutions.
Korean Journal of Chemical Engineering, 32, (4), 767-776, (2015)
   

Yu P et al., Magnetic Molecularly Imprinted Polymer Beads Obtained by Suspension Polymerization for the Adsorption of 2, 4, 6-Trichlorophenol from an Aqueous Solution in a Fixed-bed Column.
Adsorption Science & Technology, 33, (3), 321-336, (2015)
   

Peng J et al., New techniques of on-line biological sample processing and their application in the field of biopharmaceutical analysis.
Acta Pharmaceutica Sinica B, 6, (6), 540-551, (2016)
   

Dong YY et al., Grafting of MIPs from PVDF Membranes via Reversible Addition-fragmentation Chain Transfer Polymerization for Selective Removal of p-Hydroxybenzoic Acid.
Chemical Research in Chinese Universities, 34, (6), 1051-1057, (2018)
   

Guo PQ et al., Monodisperse molecularly imprinted microsphere cartridges coupled with HPLC for selective analysis of dexamethasone and hydrocortisone in cosmetics by using matrix solid-phase dispersion.
Analytical Methods, 11, (29), 3687-3696, (2019)
   

Si ZH et al., Thermo-Responsive Molecularly Imprinted Hydrogels for Selective Adsorption and Controlled Release of Phenol From Aqueous Solution.
Frontiers in Chemistry, 6, Article674-(2019)
   

Li X et al., A high sensitivity electrochemical sensor based on a dual-template molecularly imprinted polymer for simultaneous determination of clenbuterol hydrochloride and ractopamine.
Analyst, 146, (20), 6323-6332, (2021)
   

Li X et al., Specific adsorption and highly sensitive detection of methyl red in wastewater using an iron paste electrode modified with a molecularly imprinted polymer.
Electrochemistry Communications, 132, Article107144-(2021)
   

Yu PH

Cui JY et al., Fabrication of lithium ion imprinted hybrid membranes with antifouling performance for selective recovery of lithium.
New Journal of Chemistry, 42, (1), 118-128, (2018)
   

Yu PL

Zia AI et al., Proceeding, Introducing molecular selectivity in rapid impedimetric sensing of phthalates, 
838-843, (2014)
   

Zia AI et al., Proceeding, Improved detection limits for phthalates by selective solid-phase micro-extraction, 
733-738, (2015)
   

Zia AI et al., Rapid and molecular selective electrochemical sensing of phthalates in aqueous solution.
Biosensors and Bioelectronics, 67, 342-349, (2015)
   

Yu PP

Yu PP et al., Green synthesis of ion-imprinted macroporous composite magnetic hydrogels for selective removal of nickel (II) from wastewater.
Journal of Molecular Liquids, 344, Article117963-(2021)
   

Yu Q

Yu Q et al., Selective removal of perfluorooctane sulfonate from aqueous solution using chitosan-based molecularly imprinted polymer adsorbents.
Water Research, 42, (12), 3089-3097, (2008)
   

Deng SB et al., Selective sorption of perfluorooctane sulfonate on molecularly imprinted polymer adsorbents.
Frontiers of Environmental Science & Engineering in China, 3, (2), 171-177, (2009)
   

Yu QQ

Yu QQ et al., Hydroxytyrosol magnetic molecularly imprinted polymers as the sorbent for solid-phase extraction for selective recognition of hydroxytyrosol from Chinese olive leaves.
Materials Today Communications, 29, Article102992-(2021)
   

Yu QR

Yu QR et al., Fluorometric determination of acetamiprid using molecularly imprinted upconversion nanoparticles.
Microchimica Acta, 187, (4), Article222-(2020)
   

Yu QW

He HB et al., Fabrication of enrofloxacin imprinted organic-inorganic hybrid mesoporous sorbent from nanomagnetic polyhedral oligomeric silsesquioxanes for the selective extraction of fluoroquinolones in milk samples.
Journal of Chromatography A, 1361, 23-33, (2014)
   

Zheng HB et al., Facile synthesis of magnetic molecularly imprinted polymers and its application in magnetic solid phase extraction for fluoroquinolones in milk samples.
Journal of Chromatography A, 1329, 17-23, (2014)
   

Tang F et al., Hydrophilic materials in sample pretreatment.
TrAC Trends in Analytical Chemistry, 86, 172-184, (2017)
   

Peng RF et al., An investigation of template anchoring strategy for molecularly imprinting materials based on nanomagnetic polyhedral oligomeric silsesquioxanes composites.
Journal of Chromatography A, 1597, 28-38, (2019)
   

Yu QX

Tan WH et al., Fabrication of a SnO2-Based Acetone Gas Sensor Enhanced by Molecular Imprinting.
Sensors, 15, (1), 352-364, (2015)
   

Tan WH et al., Design of SnO2-based highly sensitive ethanol gas sensor based on quasi molecular-cluster imprinting mechanism.
Sensors and Actuators B: Chemical, 212, 47-54, (2015)
   

Yu QY

Kong Y et al., Molecular dynamics simulations of molecularly imprinted polymer approaches to the preparation of selective materials to remove norfloxacin.
Journal of Applied Polymer Science, 133, (1), ArticleNo42817-(2016)
   

Yu R

Xie LW et al., Simultaneous determination of gallic and protocatechuic acids in Lycium chinense using HPLC coupled with magnetic molecular-imprinted solid phase extraction.
European Journal of Integrative Medicine, 6, (6), 718-(2014)
   

Yu RC

Lian ZR et al., Dual-emission ratiometric fluorescent sensor based molecularly imprinted nanoparticles for visual detection of okadaic acid in seawater and sediment.
Sensors and Actuators B: Chemical, 346, Article130465-(2021)
   

Ma JX et al., Application of novel quantum dot-based molecularly imprinted fluorescence sensor in rapid detection.
Chinese Journal of Chromatography, 39, (8), 775-780, (2021)
   

Yu RF

Lin ZA et al., Preparation of boronate-functionalized molecularly imprinted monolithic column with polydopamine coating for glycoprotein recognition and enrichment.
Journal of Chromatography A, 1319, 141-147, (2013)
   

Yu RL

Yu RL et al., Synthesis and adsorption properties of pyrazosulfuron-ethyl molecularly imprinted polymers.
Journal of Beijing University of Chemical Technology (Natural Science Edition), 41, (1), 46-51, (2014)
   

Tang KJ et al., Study on Residue Determination of Clenbuterol in Pork Liver by Molecularly Imprinted Solid Phase Extraction/High Performance Liquid Chromatography.
Journal of Instrumental Analysis, 35, (1), 115-118, (2016)
   

Yu RP

Kang RF et al., A novel magnetic and hydrophilic ion-imprinted polymer as a selective sorbent for the removal of cobalt ions from industrial wastewater.
Journal of Environmental Chemical Engineering, 4, (2), 2268-2277, (2016)
   

Yu RP et al., Rational selection of the monomer for molecularly imprinted polymer preparation for selective and sensitive detection of 3-methylindole in water.
Journal of Electroanalytical Chemistry, 832, 129-136, (2019)
   

Yu RQ

Gong JL et al., A novel electrosynthesized polymer applied to molecular imprinting technology.
Talanta, 61, (4), 447-453, (2003)
   

Huan SY et al., An microelectrode based on molecularly imprinted oligomer film for rapid electrochemical sensing.
Analytical Letters, 36, (11), 2401-2416, (2003)
   

Ren J et al., The Development of Research in Molecular Imprinting Technique.
Biotechnology Bulletin, (4), 19-21, (2003)
   

Gong JL et al., Capacitive chemical sensor for fenvalerate assay based on electropolymerized molecularly imprinted polymer as the sensitive layer.
Analytical and Bioanalytical Chemistry, 379, (2), 302-307, (2004)
   

Huan SY et al., Selective electrochemical molecular recognition of benzenediol isomers using molecularly imprinted TiO2 film electrodes.
Analytica Chimica Acta, 506, (1), 31-39, (2004)
   

Huan SY et al., Determination of heavy metal ions in mixed solution by imprinted SAMs.
Electrochimica Acta, 49, (25), 4273-4280, (2004)
   

Huan SY et al., Enantioselective recognition of amino acid by differential pulse voltammetry in molecularly imprinted monolayers assembled on Au electrodes.
Electroanalysis, 16, (12), 1019-1023, (2004)
   

Liu ZH et al., Detection of cinchohine using molecularly imprinted electrosynthesized polymer as biomimetic receptor layers.
Chemical Journal of Chinese Universities, 26, (6), 1049-1051, (2005)
   

Liu ZH et al., Progress of electrochemical sensor based on molecular imprinting.
Chemical Sensors (China), 25, (4), 1-8, (2005)
   

Wu ZY et al., Sensitive nicotine sensor based on molecularly imprinted electropolymer of o-aminophenol.
Journal of Hunan University Natural Sciences, 32, (3), 10-14, (2005)
   

Liu ZH et al., Molecularly imprinted TiO2 thin film using stable ground-state complex as template as applied to selective electrochemical determination of mercury.
Talanta, 68, (4), 1120-1125, (2006)
   

Liu ZH et al., Progress in the Application of MIPs.
Science and Technology Review, 24, (1), 51-54, (2006)
   

Wu ZY et al., A sensitive nicotine sensor based on molecularly imprinted electropolymer of o-aminophenol.
Frontiers of Chemistry in China, 1, (2), 183-187, (2006)
   

Yu S

Yu S et al., Preliminary study on the molecularly imprinted polymer of bovine hemoglobin.
Chemistry Bulletin, 71, (6), 446-449, (2008)
   

Yu S et al., Proceeding, Preliminary study on repeatability of molecular recognition capability of a silica-based molecularly imprinted polymer, 
Art. No. 5516486, (2010)
   

Nie F et al., Cu2+-imprinted cross-linked chitosan resin as micro-column packing materials for online chemiluminescence determination of trace copper.
Luminescence, 26, (4), 289-295, (2011)
   

Zhou ZP et al., Synthesis of surface molecular imprinting polymer on SiO2-coated CdTe quantum dots as sensor for selective detection of sulfadimidine.
Applied Surface Science, 404, 188-196, (2017)
   

Yu SA

Yu SA et al., Lysozyme-imprinted polymer synthesized using UV free-radical polymerization.
Talanta, 83, (1), 156-161, (2010)
   

Yu SH

Wang J et al., Research Progress of the Molecularly Imprinted Cryogel.
Chinese Journal of Analytical Chemistry, 43, (11), 1777-1784, (2015)
   

Liu ZG et al., Core-Shell Regeneration Magnetic Molecularly Imprinted Polymers-Based SERS for Sibutramine Rapid Detection.
ACS Sustainable Chemistry & Engineering, 7, (9), 8168-8175, (2019)
   

Liu ZG et al., Three-template magnetic molecular imprinted polymer for the rapid separation and specific recognition of illegal cooking oil markers.
Microchemical Journal, 157, Article105052-(2020)
   

Yu SL

Zhang LX et al., Preparation and adsorption properties study of molecularly imprinted polymers based on PVA-multi-walled carbon nanotubes with enrofloxacin.
Chinese Journal of Analysis Laboratory, 37, (3), 301-305, (2018)
   

Yu SM

Yu SM et al., Molecular Imprinting Polymers for Chiral Separation of N-BOC-L-Trp.
Chemical Industry Times, 25, (10), 18-20, (2011)
   

Su LQ et al., Preparation of Vanillin Molecularly Imprinted Polymeric Microspheres by Seed Swelling Suspension Polymerization.
Chemistry Bulletin, 75, (2), 176-179, (2012)
   

Liu WL et al., Poly(3, 6-diamino-9-ethylcarbazole) based molecularly imprinted polymer sensor for ultra-sensitive and selective detection of 17-[beta]-estradiol in biological fluids.
Biosensors and Bioelectronics, 104, 79-86, (2018)
   

Wang XY et al., Molecular Imprinting Based Hybrid Ratiometric Fluorescence Sensor for the Visual Determination of Bovine Hemoglobin.
ACS Sensors, 3, (2), 378-385, (2018)
   

Zheng WH et al., Electrochemical sensor based on molecularly imprinted polymer/reduced graphene oxide composite for simultaneous determination of uric acid and tyrosine.
Journal of Electroanalytical Chemistry, 813, 75-82, (2018)
   

Zheng WH et al., Electrodeposited Pt@Molecularly imprinted polymer core-shell nanostructure: Enhanced sensing platform for sensitive and selective detection of bisphenol A.
Sensors and Actuators B: Chemical, 272, 655-661, (2018)
   

Wang XY et al., Fluorescent nanosensor designing via hybrid of carbon dots and post-imprinted polymers for the detection of ovalbumin.
Talanta, 211, Article120727-(2020)
   

Yu SN

Jin GY et al., Novel superparamagnetic core-shell molecular imprinting microspheres towards high selective sensing.
Analyst, 133, (10), 1367-1372, (2008)
   

Yu SR

Lu DN et al., An ultra-sensitive molecularly imprinted polymer (MIP) and gold nanostars (AuNS) modified voltammetric sensor for facile detection of perfluorooctance sulfonate (PFOS) in drinking water.
Sensors and Actuators B: Chemical, 352, Article131055-(2022)
   

Yu SS

Luo Y et al., PEGylation of boronate-affinity-oriented surface imprinting magnetic nanoparticles with improved performance.
Talanta, 238, Article122992-(2022)
   

Yu SW

Xiao SJ et al., Application of molecularly imprinted polymers in separation fields.
New Chemical Materials, 35, (2), 4-5, 8, (2007)
   

Xiao SJ et al., Solid-phase extraction of luteolin from peanut hull using molecular imprinted polymers.
Chemical Industry and Engineering Progress, 29, (2), 293-296, (2010)
   

Xiao SJ et al., Proceeding, Synthesis of Novel Separation Materials Based on Molecular Imprinting Technology, 
Cui CX, Li YL, Yuan ZH (Eds.), 1441-1445, (2012)
   

Xiao SJ et al., Proceeding, Research Progress of Molecular Imprinting Technology, 
Bu JL, Kim YH (Eds.), 1678-1681, (2013)
   

Yu TM

Yu TM et al., Selective adsorption of Zn2+ on surface ion-imprinted polymer.
Desalination and Water Treatment, 57, (33), 15455-15466, (2016)
   

Yu WB

Chen CC et al., Molecularly Imprinted Polymer as an Antibody Substitution in Pseudo-immunoassays for Chemical Contaminants in Food and Environmental Samples.
Journal of Agricultural and Food Chemistry, 66, (11), 2561-2571, (2018)
   

Yu WD

Liu YK et al., Dynamic rheological behavior of the P(AN-co-MAA) molecularly imprint cast solution with the template molecular of the uracil.
Polymer Materials Science and Engineering, 23, (4), 118-120, 124, (2007)
   

Yu WL

Yu WL et al., Preparation of a carboxylated single-walled carbon-nanotube-chitosan functional layer and its application to a molecularly imprinted electrochemical sensor to quantify semicarbazide.
Food Chemistry, 333, Article127524-(2020)
   

Yu WN

Zhu GF et al., A new ionic liquid surface-imprinted polymer for selective solid-phase-extraction and determination of sulfonamides in environmental samples.
Journal of Separation Science, 42, (3), 725-735, (2019)
   

Yu WX

Huang L et al., Chip-based multi-molecularly imprinted monolithic capillary array columns coated Fe3O4/GO for selective extraction and simultaneous determination of tetracycline, chlortetracycline and deoxytetracycline in eggs.
Microchemical Journal, 150, Article104097-(2019)
   

Yu X

Zhai HY et al., A glass/PDMS electrophoresis microchip embedded with molecular imprinting SPE monolith for contactless conductivity detection.
Microchemical Journal, 114, 223-228, (2014)
   

Lian WJ et al., Biomacromolecular Logic Devices Based on Simultaneous Electrocatalytic and Electrochemiluminescence Responses of Ru(bpy)32+ at Molecularly Imprinted Polymer Film Electrodes.
The Journal of Physical Chemistry C, 119, (34), 20003-20010, (2015)
   

Zeng JX et al., A ion-imprinted chitosan/Al2O3 composite material for selective separation of copper(II).
Desalination and Water Treatment, 55, (5), 1229-1239, (2015)
   

Liang GH et al., Synthesis of carbon quantum dots-doped dummy molecularly imprinted polymer monolithic column for selective enrichment and analysis of aflatoxin B1 in peanut.
Journal of Pharmaceutical and Biomedical Analysis, 149, 258-264, (2018)
   

Yu X et al., Computational design of a molecularly imprinted polymer compatible with an aqueous environment for solid phase extraction of chenodeoxycholic acid.
Journal of Chromatography A, 1609, Article460490-(2020)
   

Zeng HN et al., Synthesis of molecularly imprinted polymers based on boronate affinity for diol-containing macrolide antibiotics with hydrophobicity-balanced and pH-responsive cavities.
Journal of Chromatography A, 1642, Article461969-(2021)
   

Yu XB

Yu XB et al., Simulation and Preparation of Molecular Imprinting System with Atrazine as Template.
Chinese Journal of Structural Chemistry, 34, (4), 488-496, (2015)
   

Yu XF

Zhang ZR et al., Facile construction of a molecularly imprinted polymer-based electrochemical sensor for the detection of milk amyloid A.
Microchimica Acta, 187, (12), Article642-(2020)
   

Yu XH

Jiang WJ et al., Ion-imprinted magnetic nanoparticles for specific separation and concentration of ultra-trace methyl mercury from aqueous sample.
Journal of Chromatography A, 1496, 167-173, (2017)
   

Ma JQ et al., Preparation of molecularly imprinted hybrid mesoporous silica materials for determination of fluoroquinolone veterinary drug residues in codfish by solid-phase extraction-high performance liquid chromatography.
Journal of Food Safety and Quality, 9, (3), 540-546, (2018)
   

Yu XJ

Liu YY et al., Preparation of Surface Molecular Imprinting Microspheres and Its Application in Water Treatment.
Materials Review, 25, (7), 131-134, (2011)
   

Yu XL

Yuan XY et al., Molecularly imprinted polymer and its application in organic synthesis.
Journal of Hubei University (Natural Science Edition), 24, (3), 250-255+266, (2002)
   

Tang B et al., Study on Preparation of Pirimicarb Molecularly Imprinted Polymers and Its Absorption Property.
Journal of Shanghai Jiaotong University (Agricultural Science), 28, (3), 286-291, (2010)
   

Zhao DY et al., Preparation and characterization of a molecularly imprinted polymer by grafting on silica supports: a selective sorbent for patulin toxin.
Analytical and Bioanalytical Chemistry, 401, (7), 2259-2273, (2011)
   

Yu XL et al., Magnetic molecularly imprinted polymer nanoparticles for separating aromatic amines from azo dyes - Synthesis, characterization and application.
Separation and Purification Technology, 204, 213-219, (2018)
   

Yu XN

Yu XN et al., Preparation and photodegradation properties of transition metal ion-poly-o-phenylenediamine/TiO2/fly-ash cenospheres by ion imprinting technology.
RSC Advances, 3, (34), 14807-14813, (2013)
   

Yu XN et al., Preparation of rare earth metal ion/TiO2Hal-conducting polymers by ions imprinting technique and its photodegradation property on tetracycline.
Applied Clay Science, 99, 125-130, (2014)
   

Yu XP

Wang L et al., Application of molecular imprinting technique to solid-phase microextraction.
Metallurgical Analysis, 33, (11), 33-39, (2013)
   

Yu XP et al., Fouling Resistant CA/PVA/TiO2 Imprinted Membranes for Selective Recognition and Separation Salicylic Acid from Waste Water.
Frontiers in Chemistry, 5, ArticleNo2-(2017)
   

Dong YY et al., Grafting of MIPs from PVDF Membranes via Reversible Addition-fragmentation Chain Transfer Polymerization for Selective Removal of p-Hydroxybenzoic Acid.
Chemical Research in Chinese Universities, 34, (6), 1051-1057, (2018)
   

Si ZH et al., Thermo-Responsive Molecularly Imprinted Hydrogels for Selective Adsorption and Controlled Release of Phenol From Aqueous Solution.
Frontiers in Chemistry, 6, Article674-(2019)
   

Yu XQ

Zhang Y et al., Proceeding, Electrochemical Sensor for Parathion Based on Molecularly Imprinted Sol-Gel Polymer, 
Iranpour R, Zhao J, Wang AJ, Yang FL, Li XY (Eds.), 1383-1386, (2012)
   

Jing YJ et al., Pb(II)-imprinted chitosan beads to enhance the adsorption property and selectivity: characterization, kinetics, and thermodynamics.
Desalination and Water Treatment, 57, (32), 15073-15082, (2016)
   

Yu XQ et al., The effective and selective separation of (-)-epigallocatechin gallate by molecularly imprinted chitosan beads.
Journal of Food Science and Technology, 54, (3), 770-777, (2017)
   

Yu XR

Wang XJ et al., Characterization and application of molecularly imprinted polymer-coated quantum dots for sensitive fluorescent determination of diethylstilbestrol in water samples.
Talanta, 197, 98-104, (2019)
   

Yu XR et al., Development and Application of the Dispersive Solid-Phase Extraction Method Based on Molecular Imprinted Polymers for Removal of Matrix Components of Bivalve Shellfish Extracts in the GC-MS/MS Analysis of Amide/Dinitroaniline/Substituted Urea Herbicides.
Chromatographia, 82, (6), 961-970, (2019)
   

Yu XX

Hu YF et al., Research on Self-assembly MWNTs-clindamycin Molecularly Imprinted Sol-gel Electrochemical Sensor.
Chemical Journal of Chinese Universities, 30, (9), 1703-1708, (2009)
   

Yu XY

Yu XY et al., Nanostructured metal oxides/hydroxides-based electrochemical sensor for monitoring environmental micropollutants.
Trends in Environmental Analytical Chemistry, 3-4, 28-35, (2014)
   

Ding HY et al., Preparation and characterization of biocompatible molecularly imprinted poly(ionic liquid) films on the surface of multi-walled carbon nanotubes.
RSC Advances, 6, (49), 43526-43538, (2016)
   

Liu MM et al., A sol-gel derived pH-responsive bovine serum albumin molecularly imprinted poly(ionic liquids) on the surface of multiwall carbon nanotubes.
Analytica Chimica Acta, 932, 29-40, (2016)
   

Liu ZG et al., Core-Shell Regeneration Magnetic Molecularly Imprinted Polymers-Based SERS for Sibutramine Rapid Detection.
ACS Sustainable Chemistry & Engineering, 7, (9), 8168-8175, (2019)
   

Yu XZ

Zhang Q et al., Preparation and application of molecularly imprinted polymer solid-phase microextraction fiber for the selective analysis of auxins in tobacco.
Journal of Separation Science, 42, (16), 2687-2695, (2019)
   

Yu Y

Yu Y et al., Study on the Preparation and Recognition Property of Molecular Imprinted Polymer of Osalmide.
Chemical Industry Times, 23, (6), 18-20, (2009)
   

Yu Y et al., Study on the preparation and recognition property of molecular imprinted polymer of salicylanilide.
Chemical Engineer, 23, (4), 63-(2009)
   

Cai D et al., A molecular-imprint nanosensor for ultrasensitive detection of proteins.
Nature Nanotechnology, 5, (8), 597-601, (2010)
   

Hu XG et al., Molecularly imprinted polymer coated on stainless steel fiber for solid-phase microextraction of chloroacetanilide herbicides in soybean and corn.
Journal of Chromatography A, 1217, (38), 5875-5882, (2010)
   

Hu XG et al., Preparation and Characterization of Metolachlor Molecularly Imprinted Polymer Coating on Stainless Steel Fibers for Solid-Phase Microextraction.
Analytical Letters, 44, (7), 1358-1370, (2011)
   

Hu XG et al., Novel liquid-liquid-solid microextraction method with molecularly imprinted polymer-coated stainless steel fiber for aqueous sample pretreatment.
Journal of Chromatography A, 1218, (25), 3935-3939, (2011)
   

Zhou XN et al., Proceeding, Preparation and Recognized Characteristic of Histamine Molecularly Imprinted Polymers, 
Liu ZL, Peng F, Liu XG (Eds.), 780-786, (2012)
   

Yu Y et al., Polycyclic aromatic hydrocarbons in edible oils: analysis by molecularly imprinted solid-phase extraction with HPLC-FLD.
Agro FOOD Industry Hi Tech, 25, (3), 19-22, (2014)
   

Lai JP et al., Hydrophilic molecularly imprinted microspheres functionalized with amino and carboxyl groups for highly selective recognition of human hemoglobin in aqueous solution.
RSC Advances, 5, (63), 51392-51398, (2015)
   

Li ZM et al., A review of biosensing techniques for detection of trace carcinogen contamination in food products.
Analytical and Bioanalytical Chemistry, 407, (10), 2711-2726, (2015)
   

Li XP et al., Molecularly imprinted solid phase extraction in a syringe filter for determination of triazine herbicides in Radix Paeoniae Alba by ultra-fast liquid chromatography.
Talanta, 148, 539-547, (2016)
   

Yang JP et al., Coinduction of a Chiral Microenvironment in Polypyrrole by Overoxidation and Camphorsulfonic Acid for Electrochemical Chirality Sensing.
Analytical Chemistry, 90, (15), 9551-9558, (2018)
   

Zhang GH et al., A sensitive determination of albumin in urine by molecularly imprinted electrochemical biosensor based on dual-signal strategy.
Sensors and Actuators B: Chemical, 288, 564-570, (2019)
   

Zhang GH et al., Dual-mode of electrochemical-colorimetric imprinted sensing strategy based on self-sacrifice beacon for diversified determination of cardiac troponin I in serum.
Biosensors and Bioelectronics, 167, Article112502-(2020)
   

Zhang GH et al., Precise detection of prostate specific antigen in serum: A surface molecular imprinted sensor based on novel cooperated signal amplification strategy.
Sensors and Actuators B: Chemical, 302, Article126998-(2020)
   

Yu YC

Liu XY et al., Grafting of Molecularly Imprinted Polymers on to Carboxyl-Modified Multiwalled Carbon Nanotubes for the Extraction of Rhodamine B from Dried Chili Powder.
Analytical Letters, 46, (16), 2583-2596, (2013)
   

Ji SJ et al., Preparation and Adsorption Properties of Rhodamine B Molecularly Imprinted Polymers.
Food Science, 35, (6), 12-16, (2014)
   

Liu XY et al., Preparation of a magnetic molecularly imprinted polymer for selective recognition of rhodamine B.
Applied Surface Science, 320, 138-145, (2014)
   

Shen R et al., Progress in Application of Dual/Multi-Template Molecularly Imprinted Polymers.
Chinese Journal of Analytical Chemistry, 49, (10), e21205-e21215, (2021)
   

Yu YF

Liu LM et al., The Seperation and Analysis of Triadimenol and Its Analogues by Triadimenol Monolithic Imprinted Polymers.
Agrochemicals, 46, (10), 677-678, 681, (2007)
   

Ma X et al., Novel electrochemical sensing platform based on a molecularly imprinted polymer-decorated 3D-multi-walled carbon nanotube intercalated graphene aerogel for selective and sensitive detection of dopamine.
Analytical Methods, 12, (14), 1845-1851, (2020)
   

Ma X et al., Hierarchical porous MXene/amino carbon nanotubes-based molecular imprinting sensor for highly sensitive and selective sensing of fisetin.
Sensors and Actuators B: Chemical, 309, Article127815-(2020)
   

Chen SX et al., MXene/carbon nanohorns decorated with conductive molecularly imprinted poly(hydroxymethyl-3, 4-ethylenedioxythiophene) for voltammetric detection of adrenaline.
Microchimica Acta, 188, (12), Article420-(2021)
   

Yu YH

Mosbach K et al., Generation of new enzyme inhibitors using imprinted binding sites: The anti-idiotypic approach, a step toward the next generation of molecular imprinting.
Journal of the American Chemical Society, 123, (49), 12420-12421, (2001)
   

Ye L et al., Towards the development of molecularly imprinted artificial receptors for the screening of estrogenic chemicals.
Analyst, 126, (6), 760-765, (2001)
   

Yu YH et al., Formation of a class of enzyme inhibitors (drugs), including a chiral compound, by using imprinted polymers or biomolecules as molecular-scale reaction vessels.
Angewandte Chemie International Edition, 41, (23), 4459-4463, (2002)
   

Yu YH et al., Removal of the fermentation by-product succinyl L-tyrosine from the b-lactamase inhibitor clavulanic acid using a molecularly imprinted polymer.
Biotechnology and Bioengineering, 79, (1), 23-28, (2002)
   

Huang CN et al., Determination of Methomyl in Vegetables by Magnetic Molecularly Imprinted Polymer Extraction/High Performance Liquid Chromatography.
Journal of Instrumental Analysis, 32, (3), 275-280, (2013)
   

Yu YI

Wang JF et al., Simultaneously molecular imprinting chiral stationary phase.
Chinese Journal of Analytical Chemistry, 28, (12), 1531-1534, (2000)
   

Yu YJ

Li MKY et al., An organically modified silicate molecularly imprinted solid-phase microextraction device for the determination of polybrominated diphenyl ethers.
Analytica Chimica Acta, 633, (2), 197-203, (2009)
   

Yu YJ et al., Quantitative real-time detection of carcinoembryonic antigen (CEA) from pancreatic cyst fluid using 3-D surface molecular imprinting.
Analyst, 141, (14), 4424-4431, (2016)
   

Yu YJ et al., Design of a molecular imprinting biosensor with multi-scale roughness for detection across a broad spectrum of biomolecules.
Analyst, 141, (19), 5607-5617, (2016)
   

Liu MY et al., Molecularly Imprinted Core-Shell CdSe@SiO2/CDs as a Ratiometric Fluorescent Probe for 4-Nitrophenol Sensing.
Nanoscale Research Letters, 13, (1), ArticleNo27-(2018)
   

Wang YT et al., Surface-imprinted biosensors for the detection of proteins, cancer markers and viruses.
Current Trends in Polymer Science, 18, 1-13, (2018)
   

Ricotta V et al., A chip-based potentiometric sensor for a Zika virus diagnostic using 3D surface molecular imprinting.
Analyst, 144, (14), 4266-4280, (2019)
   

Yu YL

Boonjob W et al., Online Hyphenation of Multimodal Microsolid Phase Extraction Involving Renewable Molecularly Imprinted and Reversed-Phase Sorbents to Liquid Chromatography for Automatic Multiresidue Assays.
Analytical Chemistry, 82, (7), 3052-3060, (2010)
   

Li QS et al., G-Quadruplex DNA with an Apurinic Site as a Soft Molecularly Imprinted Sensing Platform.
Analytical Chemistry, 90, (9), 5552-5556, (2018)
   

Yu YM

Sun JD et al., Studies on the Characteristics of Adsorption of Cr(6+) by Rhizopus oryzae Mycelium Surface Imprinted Adsorbent.
Journal of Shenyang Agricultural University, 40, (1), 92-94, (2009)
   

Lin L et al., An l-dopa electrochemical sensor based on a graphene doped molecularly imprinted chitosan film.
Analytical Methods, 7, (4), 1387-1394, (2015)
   

Yu YP

Liu YX et al., 2, 4-Dichlorophenol removal from water using an electrochemical method improved by a composite molecularly imprinted membrane/bipolar membrane.
Journal of Hazardous Materials, 377, 259-266, (2019)
   

Yu YX

Jiang ZY et al., Preparation and applications of molecularly imprinted polymer membranes.
Membrane Science and Technology, 26, (1), 78-84, (2006)
   

Jiang ZY et al., Preparation of CS/GPTMS hybrid molecularly imprinted membrane for efficient chiral resolution of phenylalanine isomers.
Journal of Membrane Science, 280, (1-2), 876-882, (2006)
   

Wu H et al., Molecularly Imprinted Chitosan Membrane for Chiral Resolution of Phenylalanine Isomers.
Journal of Functional Polymers, 19-20, (3), 262-266, (2007)
   

Yu YY

Wang H et al., Immobilization of Carbon Dots in Molecularly Imprinted Microgels for Optical Sensing of Glucose at Physiological pH.
ACS Applied Materials & Interfaces, 7, (29), 15735-15745, (2015)
   

Nie DX et al., Composites of multiwalled carbon nanotubes/polyethyleneimine (MWCNTs/PEI) and molecularly imprinted polymers for dinitrotoluene recognition.
Sensors and Actuators B: Chemical, 224, 584-591, (2016)
   

Liang Y et al., A novel molecularly imprinted polymer composite based on polyaniline nanoparticles as sensitive sensors for parathion detection in the field.
Food Control, 133, Article108638-(2022)
   

Yu Z

Chang J et al., The development of molecularly imprinted technology research in forensic science toxicology.
Chinese Journal of Forensic Medicine, 25, (6), 411-413, (2010)
   

Chang J et al., Application of molecularly imprinted solid-phase extraction for separating and assaying amphetamines in blood samples.
Chinese Journal of Forensic Medicine, 26, (1), 22-25, (2011)
   

Guo ZN et al., Magnetic imprinted surface enhanced Raman scattering (MI-SERS) based ultrasensitive detection of ciprofloxacin from a mixed sample.
Analytical Methods, 6, (6), 1627-1632, (2014)
   

Yao R et al., Preparation and evaluation of molecularly imprinted membrane of teicoplanin.
Analytical Methods, 10, (45), 5416-5422, (2018)
   

Yu ZC

Ma XB et al., Magnetic molecularly imprinted specific solid-phase extraction for determination of dihydroquercetin from Larix griffithiana using HPLC.
Journal of Separation Science, 43, (12), 2301-2310, (2020)
   

Yu ZH

Lu ZY et al., Construction of stable core-shell imprinted Ag-(poly-o-phenylenediamine)/CoFe2O4 photocatalyst endowed with the specific recognition capability for selective photodegradation of ciprofloxacin.
RSC Advances, 7, (77), 48894-48903, (2017)
   

Lu ZY et al., Facile microwave synthesis of a Z-scheme imprinted ZnFe2O4/Ag/PEDOT with the specific recognition ability towards improving photocatalytic activity and selectivity for tetracycline.
Chemical Engineering Journal, 337, 228-241, (2018)
   

Yu ZJ

Meng LZ et al., Preparation and recognition of dyes molecular imprinting silicone (I).
Journal of Wuhan University (Natural Science Edition), 48, (2), 147-150, (2002)
   

Gong SL et al., Dye-molecular-imprinted polysiloxanes. II. Preparation, characterization, and recognition behavior.
Journal of Applied Polymer Science, 93, (2), 637-643, (2004)
   

Yu ZL

Zhang WY et al., A Novel Cu(II) Ion-Imprinted Alginate-Chitosan Complex Adsorbent for Selective Separation of Cu(II) from Aqueous Solution.
Polymer Bulletin, 76, (4), 1861-1876, (2019)
   

Yu ZR

Yu ZR et al., Emodin voltammetric sensor based on molecularly imprinted polymer membrane-modified electrode using a multiple hydrogen bonds strategy.
Journal of Applied Polymer Science, 126, (4), 1344-1350, (2012)
   

Yu ZR et al., Preparation and evaluation of aconitine imprinted microspheres and its application to body fluid samples.
Journal of Applied Polymer Science, 128, (5), 3425-3431, (2013)
   

Xu SY et al., Methyl parathion imprinted polymer nanoshell coated on the magnetic nanocore for selective recognition and fast adsorption and separation in soils.
Journal of Hazardous Materials, 264, 34-41, (2014)
   

Yu ZR et al., Recognition and neutralization of angiotensins I and II using an artificial nanogel receptor fabricated by ligand specificity determinant imprinting.
Chemical Communications, 50, (21), 2728-2731, (2014)
   

Tan L et al., Antibody-free ultra-high performance liquid chromatography/tandem mass spectrometry measurement of angiotensin I and II using magnetic epitope-imprinted polymers.
Journal of Chromatography A, 1411, 69-76, (2015)
   

Yu ZT

Tan WH et al., Fabrication of a SnO2-Based Acetone Gas Sensor Enhanced by Molecular Imprinting.
Sensors, 15, (1), 352-364, (2015)
   

Yu ZW

Shen XT et al., Inorganic molecular imprinted titanium dioxide photocatalyst: synthesis, characterization and its application for efficient and selective degradation of phthalate esters.
Journal of Materials Chemistry, 19, (27), 4843-4851, (2009)
   

Yu ZX

Yu ZX et al., Selective adsorption copper (II) behavior by surface molecular imprinted polymers.
Fresenius Environmental Bulletin, 20, (12), 3186-3193, (2011)
   

Yu ZX et al., Proceeding, Ion-imprinted polymers supported by SiO₂ with a chitosan incorporated sol-gel process for selective separation of Pb(II) and Cu(II) system, 
2921-2924, (2011)
   

Yu ZY

Qin F et al., Monolithic enantiomer-selective stationary phases for capillary electrochromatography.
Journal of Separation Science, 29, (10), 1332-1343, (2006)
   

Yu ZY et al., Progress in extraction and purification of alkaloids.
Chemical Industry and Engineering Progress, 25, (3), 259-263, (2006)
   

Li ZC et al., Cd(II)-imprinted polymer sorbents prepared by combination of surface imprinting technique with hydrothermal assisted sol-gel process for selective removal of cadmium(II) from aqueous solution.
Chemical Engineering Journal, 171, (2), 703-710, (2011)
   

Chen MX et al., Synthesis and adsorption behavior of Cd(II)-imprinted silica gel.
Polymer Materials Science and Engineering, 28, (8), 163-166, (2012)
   

Yu ZZ

Cai GN et al., Actuating photoelectrochemical sensing sensitivity coupling core-core-shell Fe3O4@C@TiO2 with molecularly imprinted polypyrrole.
Talanta, 219, Article121341-(2020)
   

Yuan AQ

Shi YY et al., Determination of Trace Cd(II) in Traditional Chinese Medicine by Flame Atomic Absorption Spectrometry after Separation and Preconcentration with Ions Imprinting of Chitosan/Attapulgite.
Journal of Analytical Science, 28, (3), 348-352, (2012)
   

Yuan B

Zhang JW et al., Multilayer Films with Nanocontainers: Redox-Controlled Reversible Encapsulation of Guest Molecules.
Chemistry - A European Journal, 18, (47), 14968-14973, (2012)
   

Zhang JW et al., Layer-by-Layer Assembly of Azulene-Based Supra-Amphiphiles: Reversible Encapsulation of Organic Molecules in Water by Charge-Transfer Interaction.
Langmuir, 29, (21), 6348-6353, (2013)
   

Nicolas H et al., Cucurbit[8]uril as Nanocontainer in a Polyelectrolyte Multilayer Film: A Quantitative and Kinetic Study of Guest Uptake.
Langmuir, 31, (39), 10734-10742, (2015)
   

Yuan B et al., A novel recycling system for nano-magnetic molecular imprinting immobilised cellulases: Synergistic recovery of anthocyanin from fruit and vegetable waste.
Bioresource Technology, 222, 14-23, (2016)
   

Yuan B et al., Pillar[6]arene Containing Multilayer Films: Reversible Uptake and Release of Guest Molecules with Methyl Viologen Moieties.
ACS Applied Materials & Interfaces, 8, (6), 3679-3685, (2016)
   

Li CG et al., Purification and identification of an actinomycin D analogue from actinomycetes associated with Ganoderma applanatum via magnetic molecularly imprinted polymers and tandem mass spectrometry.
Food and Chemical Toxicology, 119, 150-160, (2018)
   

Yuan BF

Li XS et al., Synthesis and applications of functionalized magnetic materials in sample preparation.
TrAC Trends in Analytical Chemistry, 45, 233-247, (2013)
   

Tang F et al., Hydrophilic materials in sample pretreatment.
TrAC Trends in Analytical Chemistry, 86, 172-184, (2017)
   

Yuan C

Lee MH et al., Synthesis of Magnetic Molecularly Imprinted Poly(ethylene-co-vinyl alcohol) Nanoparticles and Their Uses in the Extraction and Sensing of Target Molecules in Urine.
ACS Applied Materials & Interfaces, 2, (6), 1729-1736, (2010)
   

Bi YJ et al., Proceeding, Synthesis of Molecularly Imprinted Polymers for the Binding and Recognition of Nonylphenol, 
Sung WP, Zhang CZ, Chen R (Eds.), 55-59, (2013)
   

Yuan CS

Gu XL et al., Synthesis of surface nano-molecularly imprinted polymers for sensitive baicalin detection in biological samples.
RSC Advances, 5, (52), 41377-41384, (2015)
   

Li H et al., A novel molecularly imprinted method with computational simulation for the affinity isolation and knockout of baicalein from Scutellaria baicalensis.
Biomedical Chromatography, 30, (2), 117-125, (2016)
   

Gao D et al., In Vivo Selective Capture and Rapid Identification of Luteolin and Its Metabolites in Rat Livers by Molecularly Imprinted Solid-Phase Microextraction.
Journal of Agricultural and Food Chemistry, 65, (6), 1158-1166, (2017)
   

Gu XL et al., Efficient discovery and capture of new neuronal nitric oxide synthase-postsynaptic density protein-95 uncouplers from herbal medicines using magnetic molecularly imprinted polymers as artificial antibodies.
Journal of Separation Science, 40, (17), 3522-3534, (2017)
   

Sun CH et al., The Multi-Template Molecularly Imprinted Polymer Based on SBA-15 for Selective Separation and Determination of Panax notoginseng Saponins Simultaneously in Biological Samples.
Polymers, 9, (12), ArticleNo653-(2017)
   

Huang JJ et al., Novel surface imprinted magnetic mesoporous silica as artificial antibodies for efficient discovery and capture of candidate nNOS-PSD-95 uncouplers for stroke treatment.
Journal of Materials Chemistry B, 6, (10), 1531-1542, (2018)
   

Yao DD et al., A surface magnetic imprinted polymers as artificial receptors for selective and efficient capturing of new neuronal nitric oxide synthase-post synaptic density protein-95 uncouplers.
Journal of Pharmaceutical and Biomedical Analysis, 154, 180-190, (2018)
   

Zhang YZ et al., Polydopamine-Coated Magnetic Molecularly Imprinted Polymers with Fragment Template for Identification of Pulsatilla Saponin Metabolites in Rat Feces with UPLC-Q-TOF-MS.
Journal of Agricultural and Food Chemistry, 66, (3), 653-660, (2018)
   

Zhang YZ et al., Preparation and evaluation of temperature and magnetic dual-responsive molecularly imprinted polymers for the specific enrichment of formononetin.
Journal of Separation Science, 41, (15), 3060-3068, (2018)
   

Sun CH et al., A biomimetic fluorescent nanosensor based on imprinted polymers modified with carbon dots for sensitive detection of alpha-fetoprotein in clinical samples.
Analyst, 144, (22), 6760-6772, (2019)
   

Zhang JW et al., Debittering of lemon juice using surface molecularly imprinted polymers and the utilization of limonin.
Journal of Chromatography B, 1104, 205-211, (2019)
   

Li W et al., Rapid measurements of curcumin from complex samples coupled with magnetic biocompatibility molecularly imprinted polymer using electrochemical detection.
Journal of Separation Science, 43, (6), 1173-1182, (2020)
   

Pan LL et al., Modeling rapid and selective capture of nNOS-PSD-95 uncouplers from Sanhuang Xiexin decoction by novel molecularly imprinted polymers based on metal-organic frameworks.
RSC Advances, 10, (13), 7671-7681, (2020)
   

Wang SX et al., Specific adsorption of tetracycline from milk by using biocompatible magnetic molecular imprinting material and evaluation by ECD.
Food Chemistry, 326, Article126969-(2020)
   

Zhang JW et al., Simultaneous extraction of several targets by using non-toxic dual template molecularly imprinted polymers in vivo and in vitro.
Talanta, 219, Article121283-(2020)
   

Zhang JW et al., Extraction of activated epimedium glycosides in vivo and in vitro by using bifunctional-monomer chitosan magnetic molecularly imprinted polymers and identification by UPLC-Q-TOF-MS.
Talanta, 219, Article121350-(2020)
   

He JY et al., Synergistic recognition of transferrin by using performance dual epitope imprinted polymers.
Analytica Chimica Acta, 1186, Article339117-(2021)
   

Tan L et al., Specific adsorption and determination of aspartame in soft drinks with a zein magnetic molecularly imprinted modified MGCE sensor.
RSC Advances, 11, (22), 13486-13496, (2021)
   

Tan L et al., Investigating two distinct dummy templates molecularly imprinted polymers as paclitaxel adsorbent in synthesis system and releaser in biological samples.
Microchemical Journal, 165, Article106042-(2021)
   

Yuan CW

Zhan SZ et al., Synthesis, recognition and separation of print molecule in molecularly imprinted polymers.
Analytical Letters, 32, (4), 677-687, (1999)
   

Li P et al., Book chapter, Resolution of amino acid derivative on molecularly imprinted polymer, 
In: IEEE-EMBS Asia Pacific Conference on Biomedical Engineering - Proceedings, Pts 1 & 2, Zheng XX, He B, Zhang YT (Eds.) World Publishing Corporation: Beijing, 419-420, (2000)
   

Li P et al., Surface plasmon resonance studies on molecular imprinting.
Sensors, 2, (1), 35-40, (2002)
   

Li P et al., Synthesis of a molecularly imprinted polymer and its application in chiral separation for phenylalanine ethyl esters.
Chinese Journal of Analysis Laboratory, 21, (2), 12-14, (2002)
   

Li P et al., Chiral separation of phenylalanine ethyl ester using molecular imprinting polymer as chromatographic stationary phase.
Journal of Instrumental Analysis, 21, (3), 25-27, (2002)
   

Li P et al., Morphologies and binding characteristics of molecularly imprinted polymers prepared by precipitation polymerization.
Polymer International, 52, (12), 1799-1806, (2003)
   

Li P et al., Study on binding characteristics of (S)-naproxen imprinted polymer and performance of its complexes during preparation.
Journal of Southeast University (Natural Science Edition), 33, (4), 475-478, (2003)
   

Li P et al., Preparation of molecularly imprinted polymer with racemic 2-chloromandelic acid and study on its chiral resolution.
Acta Chimica Sinica, 61, (11), 1885-1889, (2003)
   

Ping L et al., Studies on the preparation of L-2-chloromandelic acid-imprinted polymer and its selective binding characteristics.
Acta Polymerica Sinica, (5), 724-727, (2003)
   

Li P et al., Study on the binding characteristic of S-naproxen imprinted polymer and the interactions between templates and monomers.
Journal of Analytical Chemistry, 59, (10), 939-944, (2004)
   

Rong F et al., Preparation of Molecularly Imprinted Microspheres Using L-2-Chloromandelic Acid as Template by Precipitation Polymerisation.
Journal of Functional Polymers, 18, (4), 607-612, (2005)
   

Rong F et al., Binding characteristics of molecularly imprinted polymer for pazufloxacin.
Journal of Southeast University (Natural Science Edition), 35, (5), 801-804, (2005)
   

Rong F et al., Chiral Separation of Mandelic Acid and Its Derivatives by Thin-Layer Chromatography Using Molecularly Imprinted Stationary Phases.
Journal of Liquid Chromatography & Related Technologies, 29, (17), 2593-2602, (2006)
   

Rong F et al., Preparation of molecularly imprinted microspheres by photo-grafting on supports modified with iniferter.
Chinese Science Bulletin, 51, (21), 2566-2571, (2006)
   

Rong F et al., Preparation and Evaluation of Molecularly Imprinted Stationary Phase Used for Thin-Layer Chromatography.
Chinese Journal of Chromatography, 24, (3), 305-308, (2006)
   

Yuan D

Lin F et al., Determination of bisphenol A in environmental water samples by stir bar sorptive extraction based.
Chinese Journal of Chromatography, 28, (5), 507-512, (2010)
   

Shen ZL et al., Selective Solid-Phase Extraction Using Molecularly Imprinted Polymer for Analysis of Methamidophos in Water and Soil Samples.
Bioscience Biotechnology and Biochemistry, 75, (3), 473-479, (2011)
   

Liu SC et al., Graphene oxide based molecularly imprinted polymers with double recognition abilities: The combination of covalent boronic acid and traditional non-covalent monomers.
Chemical Engineering Journal, 290, 220-231, (2016)
   

Zhou RL et al., Preparation and adsorption properties of isoamyl alcohol molecularly imprinted polymers.
Chinese Journal of Analysis Laboratory, 35, (10), 1167-1170, (2016)
   

Zhou RL et al., Study on preparation and adsorption properties of butyl alcohol molecular imprinting polymers.
Chinese Journal of Analysis Laboratory, 35, (11), 1317-1320, (2016)
   

Zhou TY et al., Determination of triazine herbicides from honey samples based on hydrophilic molecularly imprinted resins followed by high performance liquid chromatography-tandem mass spectrometry.
RSC Advances, 6, (101), 98663-98673, (2016)
   

Guo XY et al., Study on preparation and characterization of carbaryl fluorescent molecularly imprintied polymers.
Chinese Journal of Analysis Laboratory, 36, (12), 1439-1443, (2017)
   

Wang ZL et al., Preparation and property study of molecularly imprinted polymers for methyl orange.
Chinese Journal of Analysis Laboratory, 36, (3), 306-311, (2017)
   

Guo XY et al., Determination of roxithromycin residue in environmental water samples using molecularly imprinted solid phase extraction coupled with high performance liquid chromatography.
Chinese Journal of Analysis Laboratory, 37, (5), 533-536, (2018)
   

Li XM et al., Preparation and properties of cadmium(II) ion imprinted polymers.
Chinese Journal of Analysis Laboratory, 37, (3), 311-315, (2018)
   

Yuan DD

Liu Y et al., Thermal-responsive ion-imprinted polymer based on magnetic mesoporous silica SBA-15 for selective removal of Sr(II) from aqueous solution.
Colloid & Polymer Science, 293, (1), 109-123, (2015)
   

Yuan DH

Xiao DL et al., Preparation of molecularly imprinted polymers on the surface of magnetic carbon nanotubes with a pseudo template for rapid simultaneous extraction of four fluoroquinolones in egg samples.
Analyst, 138, (11), 3287-3296, (2013)
   

Xiao DL et al., Development of novel molecularly imprinted magnetic solid-phase extraction materials based on magnetic carbon nanotubes and their application for the determination of gatifloxacin in serum samples coupled with HPLC.
Journal of Chromatography A, 1274, 44-53, (2013)
   

Dai H et al., Synthesis and analytical applications of molecularly imprinted polymers on the surface of carbon nanotubes: a review.
Microchimica Acta, 182, (5-6), 893-908, (2015)
   

Yuan DX

Lin FH et al., Preparation of Stir Cake Sorptive Extraction Based on Bisphenol A Imprinted Polymer and Its Extraction Performance.
Chinese Journal of Analytical Chemistry, 40, (2), 243-248, (2012)
   

Nong SY et al., Preparation of a stir bar sorptive extraction coating based on molecularly imprinted polymer and its application in the extraction of dienestrol and hexestrol in complicated samples.
Chinese Journal of Chromatography, 30, (11), 1133-1142, (2012)
   

Nong SY et al., Preparation of Stir Bar Sorptive Extraction Based on o-Nitrophenol Imprinted Polymer and Its Extraction Performance.
Chinese Journal of Analytical Chemistry, 41, (4), 585-589, (2013)
   

Yuan DY

Chen HC et al., Silica nanoparticle supported molecularly imprinted polymer layers with varied degrees of crosslinking for lysozyme recognition.
Analytica Chimica Acta, 779, 82-89, (2013)
   

Chen HC et al., Synthesis of surface molecularly imprinted nanoparticles for recognition of lysozyme using a metal coordination monomer.
Biosensors and Bioelectronics, 53, 5-11, (2014)
   

Guo H et al., Enhanced surface imprinting of lysozyme over a new kind of magnetic chitosan submicrospheres.
Journal of Colloid and Interface Science, 440, 53-59, (2015)
   

Yuan F

Zhao HM et al., Proceeding, Electrochemical Sensor Based on Molecularly Imprinted Carbon Nanotubes for Selective Determination of Bisphenol A, 
Kim HY, Yarlaggada P (Eds.), 170-179, (2013)
   

Zhao Y et al., An electrochemical sensor for selective determination of sulfamethoxazole in surface water using a molecularly imprinted polymer modified BDD electrode.
Analytical Methods, 7, (6), 2693-2698, (2015)
   

Xu WZ et al., Acetylene black paste electrode modified with molecularly imprinted polymers/graphene for the determination of bisphenol A.
Journal of Separation Science, 39, (24), 4851-4857, (2016)
   

Yuan G

Gu JY et al., Surface-initiated molecularly imprinted polymeric column: In situ synthesis and application for semi-preparative separation by high performance liquid chromatography.
Journal of Chromatography A, 1218, (45), 8150-8155, (2011)
   

Chen TF et al., Semi-Preparative Scale Separation of Emodin from Plant Extract by Using Molecularly Imprinted Polymer as Stationary Phase.
Chromatographia, 77, (13-14), 893-899, (2014)
   

Yuan GL

Gu XH et al., Preparation of chlorogenic acid surface-imprinted magnetic nanoparticles and their usage in separation of Traditional Chinese Medicine.
Analytica Chimica Acta, 675, (1), 64-70, (2010)
   

Yuan GY

Yuan GY et al., A novel ion-imprinted polymer induced by the glycylglycine modified metal-organic framework for the selective removal of Co(II) from aqueous solutions.
Chemical Engineering Journal, 333, 280-288, (2018)
   

Yuan H

Yuan H et al., Book chapter, 2.18 - Monoliths, Fundamentals for Sample Preparation, 
In: Comprehensive Sampling and Sample Preparation, Pawliszyn J (Ed.) Academic Press: Oxford, Ch. 18, 345-358, (2012)
   

Yuan H et al., The Fabrication and Application of Bio-Functional Microspheres.
Current Organic Chemistry, 18, (17), 2270-2279, (2014)
   

Li Z et al., Recent development and application of solid phase extraction materials.
Reviews on Advanced Materials Science, 49, (1), 87-111, (2017)
   

Yuan HG

Ye T et al., Core-satellite surface imprinting polymer-based pipette tip solid-phase extraction for the colorimetric determination of pyrethroid metabolite.
Microchimica Acta, 187, (7), Article412-(2020)
   

Yuan HM

Zhu GJ et al., Recent development of monolithic materials as matrices in microcolumn separation systems.
Journal of Separation Science, 30, (6), 792-803, (2007)
   

Yuan J

Yuan J et al., Probing the molecular basis for sulfonamides recognition in surface molecularly imprinted polymers using computational and experimental approaches.
Reactive and Functional Polymers, 170, Article105105-(2022)
   

Yuan JB

Zhang JW et al., Extraction of activated epimedium glycosides in vivo and in vitro by using bifunctional-monomer chitosan magnetic molecularly imprinted polymers and identification by UPLC-Q-TOF-MS.
Talanta, 219, Article121350-(2020)
   

Yuan JH

Li M et al., A novel In(III) ion-imprinted polymer (IIP) for selective extraction of In(III) ions from aqueous solutions.
Hydrometallurgy, 176, 243-252, (2018)
   

Yuan JS

Deng HN et al., Preparation of a Copper Ion Selective Membrane by Surface-Modified Molecular Imprinting.
Industrial & Engineering Chemistry Research, 51, (43), 14018-14025, (2012)
   

Yuan KS

Yuan KS et al., Sensitive determination of rose bengal in brown sugar by a molecularly imprinted solid-phase extraction monolithic capillary column coupled with capillary electrophoresis.
Analytical Methods, 7, (19), 8297-8303, (2015)
   

Zhai HY et al., Molecularly imprinted coated graphene oxide solid-phase extraction monolithic capillary column for selective extraction and sensitive determination of phloxine B in coffee bean.
Analytica Chimica Acta, 865, 16-21, (2015)
   

Huang L et al., Chip-based dual-molecularly imprinted monolithic capillary array columns coated Ag/GO for selective extraction and simultaneous determination of bisphenol A and nonyl phenol in fish samples.
Journal of Chromatography A, 1474, 14-22, (2016)
   

Zhai HY et al., Chip-based molecularly imprinted monolithic capillary array columns coated GO/SiO2 for selective extraction and sensitive determination of rhodamine B in chili powder.
Food Chemistry, 214, 664-669, (2017)
   

Yuan L

Yan XP et al., Rapid Detection of Dimethoate in Soybean Samples by Microfluidic Paper Chips Based on Oil-Soluble CdSe Quantum Dots.
Foods, 10, (11), ArticleNo2810-(2021)
   

Yuan LH

Ding MJ et al., Synthesis of core-shell magnetic molecularly imprinted polymers and detection of sildenafil and vardenafil in herbal dietary supplements.
Journal of Hazardous Materials, 191, (1-3), 177-183, (2011)
   

Li Y et al., Preparation of Imprinted Polymers at Surface of Magnetic Nanoparticles for the Selective Extraction of Tadalafil from Medicines.
ACS Applied Materials & Interfaces, 3, (9), 3308-3315, (2011)
   

Ma J et al., The study of core-shell molecularly imprinted polymers of 17[beta]-estradiol on the surface of silica nanoparticles.
Biosensors and Bioelectronics, 26, (5), 2791-2795, (2011)
   

Wang S et al., Construction of uniformly sized pseudo template imprinted polymers coupled with HPLC-UV for the selective extraction and determination of trace estrogens in chicken tissue samples.
Journal of Hazardous Materials, 186, (2-3), 1513-1519, (2011)
   

Yuan LH et al., Electrochemical sensor based on molecularly imprinted membranes at platinum nanoparticles-modified electrode for determination of 17[beta]-estradiol.
Biosensors and Bioelectronics, 29, (1), 29-33, (2011)
   

Yuan LH et al., Preparation of estriol-molecularly imprinted silica nanoparticles for determining oestrogens in milk tablets.
Food Chemistry, 131, (3), 1063-1068, (2012)
   

Yuan LJ

Meng LZ et al., Preparation and recognition of dyes molecular imprinting silicone (I).
Journal of Wuhan University (Natural Science Edition), 48, (2), 147-150, (2002)
   

Feng H et al., Surface molecular imprinting on dye-(NH2)-SiO2 NPs for specific recognition and direct fluorescent quantification of perfluorooctane sulfonate.
Sensors and Actuators B: Chemical, 195, 266-273, (2014)
   

Tran TTT et al., Molecularly imprinted polymer modified TiO2 nanotube arrays for photoelectrochemical determination of perfluorooctane sulfonate (PFOS).
Sensors and Actuators B: Chemical, 190, 745-751, (2014)
   

Tang JW et al., Determination of [beta]-Agonist Residues in Animal-Derived Food by a Liquid Chromatography-Tandem Mass Spectrometric Method Combined with Molecularly Imprinted Stir Bar Sorptive Extraction.
Journal of Analytical Methods in Chemistry, 2018, ArticleID9053561-(2018)
   

Tang JW et al., Dummy Molecularly Imprinted Matrix Solid-Phase Dispersion for Selective Extraction of Seven Estrogens in Aquatic Products.
Food Analytical Methods, 12, (10), 2241-2249, (2019)
   

Tang JW et al., Trace analysis of estrogens in milk samples by molecularly imprinted solid phase extraction with genistein as a dummy template molecule and high-performance liquid chromatography-tandem mass spectrometry.
Steroids, 145, 23-31, (2019)
   

Yuan LL

He J et al., Synthesis of Fragment-Imprinted Microspheres of 2, 6-Dichloropyrimidine as Templates and Determination of Sulfonamides in Milk Samples.
Chromatographia, 76, (15-16), 959-965, (2013)
   

Yuan LL et al., Application of magnetic molecularly imprinted polymers in the analysis of food safety.
Journal of Food Safety and Quality, 5, (11), 3582-3586, (2014)
   

Wu CJ et al., Synthesis of cobalt-based magnetic nanoporous carbon core-shell molecularly imprinted polymers for the solid-phase extraction of phthalate plasticizers in edible oil.
Analytical and Bioanalytical Chemistry, 410, (26), 6943-6954, (2018)
   

Wang HX et al., Comparative study of capsaicin molecularly imprinted polymers prepared by different polymerization methods.
Journal of Polymer Science Part A: Polymer Chemistry, 57, (2), 157-164, (2019)
   

Yuan LM

Wang BJ et al., The molecular imprinting of magnetic nanoparticles with boric acid affinity for the selective recognition and isolation of glycoproteins.
RSC Advances, 11, (41), 25524-25529, (2021)
   

Yuan M

Lang L et al., Synthesis of molecular imprinted polymers for methyl dopa with different functional monomers.
West China Journal of Pharmaceutical Sciences, 20, (3), 202-204, (2005)
   

Ye T et al., Colorimetric detection of pyrethroid metabolite by using surface molecularly imprinted polymer.
Sensors and Actuators B: Chemical, 254, 417-423, (2018)
   

Yang P et al., A novel morphological ion imprinted polymers for selective solid phase extraction of Cd(II): Preparation, adsorption properties and binding mechanism to Cd(II).
Reactive and Functional Polymers, 151, Article104569-(2020)
   

Ye T et al., Core-satellite surface imprinting polymer-based pipette tip solid-phase extraction for the colorimetric determination of pyrethroid metabolite.
Microchimica Acta, 187, (7), Article412-(2020)
   

Yin FQ et al., Synthesis and evaluation of mesoporous silica/mesoporous molecularly imprinted nanoparticles as adsorbents for detection and selective removal of imidacloprid in food samples.
Food Chemistry, 364, Article130216-(2021)
   

Yuan Q

Li DJ et al., Efficient vitamin B12-imprinted boronate affinity magnetic nanoparticles for the specific capture of vitamin B12.
Analytical Biochemistry, 561-562, 18-26, (2018)
   

Yuan QH

Yuan QH et al., Progress on molecularly imprinted polymers with novel functional monomers.
Chemistry Bulletin, 72, (8), 707-712, (2009)
   

Wu SQ et al., Recognition characteristics of molecularly imprinted microspheres for triazine herbicides using hydrogen-bond array strategy and their analytical applications for corn and soil samples.
Journal of Chromatography A, 1218, (10), 1340-1346, (2011)
   

Huang BT et al., Electrochemical sensing platform based on molecularly imprinted polymer decorated N, S co-doped activated graphene for ultrasensitive and selective determination of cyclophosphamide.
Talanta, 164, 601-607, (2017)
   

Liu J et al., Novel molecularly imprinted polymer (MIP) multiple sensors for endogenous redox couples determination and their applications in lung cancer diagnosis.
Talanta, 199, 573-580, (2019)
   

Yuan R

Xu L et al., Conductometric salicylic acid sensor based on molecular imprinting technique.
Journal of Guangxi Normal University (Natural Science Edition), 21, (z6), 137-137, (2003)
   

Zhou L et al., A capacitive sensor based on molecularly imprinted polymers and poly(p-aminobenzene sulfonic acid) film for detection of pazufloxacin mesilate.
Science in China Series B: Chemistry, 50, (4), 547-553, (2007)
   

Ye T et al., Core-satellite surface imprinting polymer-based pipette tip solid-phase extraction for the colorimetric determination of pyrethroid metabolite.
Microchimica Acta, 187, (7), Article412-(2020)
   

Yuan S

Gao CM et al., Engineering anatase hierarchically cactus-like TiO2 arrays for photoelectrochemical and visualized sensing platform.
Biosensors and Bioelectronics, 90, 336-342, (2017)
   

Yuan SF

Fang GZ et al., Preparation and Evaluation of Lysozyme Molecularly Imprinted Polymer Film on the Surface of Multi-wall Carbon Nanotubes.
Current Organic Chemistry, 16, (12), 1461-1467, (2012)
   

Yuan SF et al., Protein imprinted ionic liquid polymer on the surface of multiwall carbon nanotubes with high binding capacity for lysozyme.
Journal of Chromatography B, 960, 239-246, (2014)
   

Yuan SQ

Lu ZY et al., Magnetic Hierarchical Photocatalytic Nanoreactors: Toward Highly Selective Cd2+ Removal with Secondary Pollution Free Tetracycline Degradation.
ACS Applied Nano Materials, 2, (3), 1664-1674, (2019)
   

Yuan T

Zhang SZ et al., Preparation methods and selective adsorption capabilities of cholesterol molecularly imprinted polymers.
Chemistry Bulletin, 74, (2), 137-143, (2011)
   

Ao JJ et al., Applying molecular modelling and experimental studies to develop molecularly imprinted polymer for domoic acid enrichment from both seawater and shellfish.
Chemosphere, 199, 98-106, (2018)
   

Yuan TT

Fan JP et al., Preparation, characterization, and application of multiple stimuli-responsive rattle-type magnetic hollow molecular imprinted poly (ionic liquids) nanospheres (Fe3O4@void@PILMIP) for specific recognition of protein.
Chemical Engineering Journal, 337, 722-732, (2018)
   

Yuan W

He Q et al., Molecularly imprinted technique-flow injection-molecularl fluorometry detect bisphenol A in water.
Journal of Shanghai Normal University (Natural Sciences), 40, (6), 574-579, (2011)
   

Yuan WZ

Cai Y et al., Preparation of a chemiluminescence sensor for multi-detection of benzimidazoles in meat based on molecularly imprinted polymer.
Food Chemistry, 280, 103-109, (2019)
   

Cai Y et al., Molecularly imprinted microspheres based multiplexed fluorescence method for simultaneous detection of benzimidazoles and pyrethroids in meat samples.
Food Chemistry, 319, Article126539-(2020)
   

Yuan X

Qin L et al., Molecularly imprinted beads with double thermosensitive gates for selective recognition of proteins.
Analytical and Bioanalytical Chemistry, 399, (10), 3375-3385, (2011)
   

Yu XB et al., Simulation and Preparation of Molecular Imprinting System with Atrazine as Template.
Chinese Journal of Structural Chemistry, 34, (4), 488-496, (2015)
   

Yuan XC

Guo P et al., Dummy-surface molecularly imprinted polymers as a sorbent of micro-solid-phase extraction combined with dispersive liquid-liquid microextraction for determination of five 2-phenylpropionic acid NSAIDs in aquatic environmental samples.
Analytical and Bioanalytical Chemistry, 410, (2), 373-389, (2018)
   

Yuan XC et al., Magnetic dummy-template molecularly imprinted polymers based on multi-walled carbon nanotubes for simultaneous selective extraction and analysis of phenoxy carboxylic acid herbicides in cereals.
Food Chemistry, 333, Article127540-(2020)
   

Yuan XC et al., Fe3O4/graphene molecularly imprinted composite for selective separation of catecholamine neurotransmitters and their analysis in rat brain tissues.
Talanta, 224, Article121843-(2021)
   

Yuan Y et al., Dummy molecularly imprinted membranes based on an eco-friendly synthesis approach for recognition and extraction of enrofloxacin and ciprofloxacin in egg samples.
Journal of Chromatography A, 1653, Article462411-(2021)
   

Yuan XH

Yuan XH et al., Synthesis and molecule recognition capability of corilagin-molecularly imprinted polymer.
Acta Pharmaceutica Sinica, 42, (11), 1218-1221, (2007)
   

Hu J et al., Recognition of proteins and peptides: Rational development of molecular imprinting technology.
Polymer Science Series A, 52, (3), 328-339, (2010)
   

Yuan XH et al., Solid-phase extraction of corilagin and its analogs from Phyllanthus urinaria L. by corilagin-molecularly imprinted polymer.
Chinese Pharmaceutical Journal, 45, (8), 574-577, (2010)
   

Yuan XH et al., Optimization of Preparation Technique of Valsartan Molecularly Imprinted Polymer by Orthogonal Experiment.
Traditional Chinese Drug Research and Clinical Pharmacology, (4), 420-423, (2013)
   

Yuan XH et al., A convenient separation method for di(2-ethylhexyl)phthalate by novel superparamagnetic molecularly imprinted polymers.
RSC Advances, 8, (63), 36191-36199, (2018)
   

Yuan XK

Zeng JX et al., A ion-imprinted chitosan/Al2O3 composite material for selective separation of copper(II).
Desalination and Water Treatment, 55, (5), 1229-1239, (2015)
   

Yuan XL

Li M et al., A novel In(III) ion-imprinted polymer (IIP) for selective extraction of In(III) ions from aqueous solutions.
Hydrometallurgy, 176, 243-252, (2018)
   

Huang QD et al., A novel fluorescent optical fiber sensor for highly selective detection of antibiotic ciprofloxacin based on replaceable molecularly imprinted nanoparticles composite hydrogel detector.
Sensors and Actuators B: Chemical, 328, Article129000-(2021)
   

Yuan XY

Yuan XY et al., Molecularly imprinted polymer and its application in organic synthesis.
Journal of Hubei University (Natural Science Edition), 24, (3), 250-255+266, (2002)
   

Zhou Q et al., Application of Molecular Imprinting Technique in the Environmental Field.
Bulletin of Science and Technology, 21, (1), 110-114, (2005)
   

Yuan XY et al., Chiral determination of cinchonine using an electrochemiluminescent sensor with molecularly imprinted membrane on the surfaces of magnetic particles.
Luminescence, 32, (7), 1116-1122, (2017)
   

Wei J et al., Ionic liquid-sensitized molecularly imprinted polymers based on heteroatom co-doped quantum dots functionalized graphene for sensitive detection of [lambda]-cyhalothrin.
Analytica Chimica Acta, 1136, 9-18, (2020)
   

Yuan XY et al., High-Performance Multiporous Imprinted Microspheres Based on N-Doped Carbon Dots Exfoliated from Covalent Organic Framework for Flonicamid Optosensing.
ACS Applied Materials & Interfaces, 12, (22), 25150-25158, (2020)
   

Yuan XY et al., N-doped carbon dots derived from covalent organic frameworks embedded in molecularly imprinted polymers for optosensing of flonicamid.
Microchemical Journal, 159, Article105585-(2020)
   

Zhang Y et al., Determination of nereistoxin-related insecticide via quantum-dots-doped covalent organic frameworks in a molecularly imprinted network.
Microchimica Acta, 187, (8), Article464-(2020)
   

Yuan XY et al., Molecularly Imprinted Dual-Responsive Extraction for Avenanthramides Using Covalent Organic Frameworks Doped with Polyethyleneimine-Modified Mn-ZnS Quantum Dots.
Food Analytical Methods, 14, (7), 1336-1344, (2021)
   

Yuan Y

Lei XL et al., Preparation of Rhodamine B Molecularly Imprinted Polymer Microspheres and Its Application in Solid Phase Extraction.
Chinese Journal of Applied Chemistry, 28, (5), 531-536, (2011)
   

Peng L et al., Molecularly imprinted polymer for solid-phase extraction of rutin in complicated traditional Chinese medicines.
Analyst, 136, (4), 756-763, (2011)
   

Yuan Y et al., Development and characterization of molecularly imprinted polymers for the selective enrichment of podophyllotoxin from traditional Chinese medicines.
Analytica Chimica Acta, 695, (1-2), 63-72, (2011)
   

Zhu HB et al., Development and characterization of molecularly imprinted polymer microspheres for the selective detection of kaempferol in traditional Chinese medicines.
Analytical Methods, 3, (2), 348-355, (2011)
   

Yang YJ et al., Constructing synergistic groups in porous aromatic frameworks for the selective removal and recovery of lead(ii) ions.
Journal of Materials Chemistry A, 6, (12), 5202-5207, (2018)
   

Yuan Y et al., Molecularly Imprinted Porous Aromatic Frameworks and Their Composite Components for Selective Extraction of Uranium Ions.
Advanced Materials, 30, (12), ArticleNo1706507-(2018)
   

Yuan Y et al., Molecularly Imprinted Porous Aromatic Frameworks Serving as Porous Artificial Enzymes.
Advanced Materials, 30, (27), 1800069-(2018)
   

Li J et al., Preparation of Molecularly Imprinted Polymer Sensor on Electrochemically Reduced Graphene Oxide Modified Electrode for Selective Probing of Thiabendazole.
Journal of The Electrochemical Society, 166, (2), B84-B91, (2019)
   

Yuan Y et al., A biosensor based on hemoglobin immobilized with magnetic molecularly imprinted nanoparticles and modified on a magnetic electrode for direct electrochemical determination of 3-chloro-1, 2-propandiol.
Journal of Electroanalytical Chemistry, 834, 233-240, (2019)
   

Yuan XC et al., Fe3O4/graphene molecularly imprinted composite for selective separation of catecholamine neurotransmitters and their analysis in rat brain tissues.
Talanta, 224, Article121843-(2021)
   

Yuan Y et al., Dummy molecularly imprinted membranes based on an eco-friendly synthesis approach for recognition and extraction of enrofloxacin and ciprofloxacin in egg samples.
Journal of Chromatography A, 1653, Article462411-(2021)
   

Yuan YA

Yuan YA et al., Ionic liquid-molecularly imprinted polymers for pipette tip solid-phase extraction of (Z)-3-(chloromethylene)-6-flourothiochroman-4-one in urine.
Journal of Chromatography A, 1408, 49-55, (2015)
   

Yuan YH

Yuan YH et al., Preparation of core-shell magnetic molecular imprinted polymer with binary monomer for the fast and selective extraction of bisphenol A from milk.
Journal of Chromatography A, 1462, 2-7, (2016)
   

Yuan YL

Liu YT et al., Electrochemical sensor based on a poly(para-aminobenzoic acid) film modified glassy carbon electrode for the determination of melamine in milk.
Electrochimica Acta, 56, (12), 4595-4602, (2011)
   

Wei XP et al., Highly sensitive analysis of organometallic compounds based on molecularly imprinted electrochemical sensors.
Analytical Methods, 9, (11), 1771-1778, (2017)
   

Yuan YN

Yuan YN et al., Green synthesis of hydrophilic protein-imprinted resin with specific recognition of bovine serum albumin in aqueous matrix.
Analytica Chimica Acta, 1033, 213-220, (2018)
   

Yuan YN et al., Selective extraction and detection of [beta]-agonists in swine urine for monitoring illegal use in livestock breeding.
Food Chemistry, 313, Article126155-(2020)
   

Chen X et al., Selective, sensitive, and miniaturized analytical method based on molecularly imprinted graphene oxide composites for the determination of naphthalene-derived plant growth regulators in apples.
Food Chemistry, 349, Article128982-(2021)
   

Wu XQ et al., Efficient enrichment and analysis of atrazine and its degradation products in Chinese Yam using accelerated solvent extraction and pipette tip solid-phase extraction followed by UPLC-DAD.
Food Chemistry, 337, Article127752-(2021)
   

Yuan YW

Wang PL et al., An aptamer based assay for the [beta]-adrenergic agonist ractopamine based on aggregation of gold nanoparticles in combination with a molecularly imprinted polymer.
Microchimica Acta, 183, (11), 2899-2905, (2016)
   

Yuan YX

Li Y et al., Selective removal of 2, 4-dichlorophenol from contaminated water using non-covalent imprinted microspheres.
Environmental Pollution, 157, (6), 1879-1885, (2009)
   

Li Y et al., Synthesis of core-shell magnetic molecular imprinted polymer by the surface RAFT polymerization for the fast and selective removal of endocrine disrupting chemicals from aqueous solutions.
Environmental Pollution, 158, (6), 2317-2323, (2010)
   

Yuan YX et al., Hydrogel Photonic Sensor for the Detection of 3-Pyridinecarboxamide.
Chemistry - A European Journal, 18, (1), 303-309, (2012)
   

Zhang YL et al., Molecularly imprinted photonic crystals for the direct label-free distinguishing of l-proline and d-proline.
Physical Chemistry Chemical Physics, 15, (40), 17250-17256, (2013)
   

Yuan XC et al., Magnetic dummy-template molecularly imprinted polymers based on multi-walled carbon nanotubes for simultaneous selective extraction and analysis of phenoxy carboxylic acid herbicides in cereals.
Food Chemistry, 333, Article127540-(2020)
   

Yuan YY

Tong LY et al., A novel lead ion-imprinted chelating nanofiber: Preparation, characterization, and performance evaluation.
Journal of Applied Polymer Science, 132, (8), Article No 41507-(2015)
   

Li J et al., Iron-based magnetic molecular imprinted polymers and their application in removal and determination of di-n-pentyl phthalate in aqueous media.
Royal Society Open Science, 4, (8), ArticleNo170672-(2017)
   

Li ZM et al., Metal-ion-imprinted thermo-responsive materials obtained from bacterial cellulose: synthesis, characterization, and adsorption evaluation.
Journal of Materials Chemistry A, 7, (19), 11742-11755, (2019)
   

Yuan Z

Guo TY et al., Chemically modified chitosan beads as matrices for adsorptive separation of proteins by molecularly imprinted polymer.
Carbohydrate Polymers, 62, (3), 214-221, (2005)
   

Lin Z et al., Application of molecular imprinting technique to separating and purifying active components in Chinese materia medica.
Chinese Traditional and Herbal Drugs, 38, (3), 457-460, (2007)
   

Yuan ZB

He JF et al., Preparation and characterization of quinine-imprinted polymers by two-step swelling polymerization.
Chinese Journal of Analysis Laboratory, 22, (z1), 322-325, (2003)
   

Zhang YP et al., Rapid preparation of molecularly imprinted capillary monolithic columns by microwave polymerization.
Chemical Journal of Chinese Universities, 28, (9), 1654-1656, (2007)
   

Yuan ZC

Yuan ZC et al., Preparation of Cu(II)-Imprinted Smart Microgels for Selective Separation of Copper Ions.
Separation Science and Technology, 50, (10), 1480-1486, (2015)
   

Yuan ZG

Xue F et al., Molecularly Imprinted Photonic Crystal for Detection of Glucose.
Chinese Journal of Analytical Chemistry, 39, (7), 1015-1020, (2011)
   

Yuan ZG et al., Preparation and phenol-recognizing ability of a poly(methacrylic acid) molecular imprint on the surface of a silica gel.
Microchimica Acta, 172, (1), 89-94, (2011)
   

Yuan ZH

Peng DP et al., Enzyme-linked immunoassay based on imprinted microspheres for the detection of sulfamethazine residue.
Journal of Chromatography A, 1506, 9-17, (2017)
   

Li ZZ et al., Selective Solid-Phase Extraction of Sulfonamides from Edible Swine Tissues Using High-Performance Imprinted Polymers.
Food Analytical Methods, 13, (6), 1304-1313, (2020)
   

Yuan ZL

Yang ML et al., Molecularly imprinted polymer with salicylaldehyde-Cu(OAc)2 as template.
Journal of Molecular Recognition, 18, (1), 103-108, (2005)
   

Zhong SA et al., Preparation and adsorption behaviors of Cu(II) ion-imprinted polymers.
Journal of Chongqing University (English Edition), 7, (1), 23-27, (2008)
   

Zhong SA et al., Preparation and Permeation Characteristics of Copper Ion Imprinted Polymer Membranes.
Chinese Journal of Applied Chemistry, 25, (8), 989-991, (2008)
   

Yuan ZQ

Zhong JP et al., Layered-nanomaterial-amplified chemiluminescence systems and their analytical applications.
Analytical and Bioanalytical Chemistry, 408, (30), 8731-8746, (2016)
   

Zeng JX et al., Ion-imprinted poly(methyl methacrylate-vinyl pyrrolidone)/poly(vinylidene fluoride) blending membranes for selective removal of ruthenium(III) from acidic water solutions.
Polymers for Advanced Technologies, 30, (7), 1865-1877, (2019)
   

Yuan ZY

Fan HT et al., Preparation of Cobalt(II) Ion Imprinted Silica Gel Sorbents by Surface Imprinting Technique and Its Adsorption Properties.
Chemical Journal of Chinese Universities, 32, (12), 2902-2907, (2011)
   

Yuangsawad R

Yuangsawad R et al., Synthesis of Molecularly Imprinted Polymer for Sterol Separation.
MATEC Web of Conferences, 62, ArticleNo04006-(2016)
   

Yue CY

Yue CY et al., Application of molecularly imprinted polymers particles in capillary electrochromatography.
Chinese Journal of Chromatography, 31, (1), 10-14, (2013)
   

Yue CY et al., Water-compatible surface molecularly imprinted silica nanoparticles as pseudostationary phase in electrokinetic chromatography for the enantioseparation of tryptophan.
Journal of Chromatography A, 1311, 176-182, (2013)
   

Yue H

Liu XH et al., A Highly Substrate-Selective Metal Nanoreactor Using a Template-Imprinted Memory.
Journal of Inorganic and Organometallic Polymers and Materials, 19, (3), 335-341, (2009)
   

Yue HJ

Zhang JJ et al., Highly selective and efficient imprinted polymers based on carboxyl-functionalized magnetic nanoparticles for the extraction of gallic acid from pomegranate rind.
Journal of Separation Science, 41, (2), 540-547, (2018)
   

Yue J

Lv KQ et al., Application and Research Development of Molecular Imprinting in Analysis of Drug Residues in Food.
Guangzhou Chemical Industry, 45, (2), 18-19, 44, (2017)
   

Yue QY

Li LL et al., Molecularly imprinted carbon nanosheets supported TiO2: Strong selectivity and synergic adsorption-photocatalysis for antibiotics removal.
Journal of Hazardous Materials, 383, Article121211-(2020)
   

Gao Y et al., Synthesis of rice husk-based ion-imprinted polymer for selective capturing Cu(II) from aqueous solution and re-use of its waste material in Glaser coupling reaction.
Journal of Hazardous Materials, 424, Article127203-(2022)
   

Yue TL

Zhang WG et al., Surface molecularly imprinted polymer capped Mn-doped ZnS quantum dots as a phosphorescent nanosensor for detecting patulin in apple juice.
Food Chemistry, 232, 145-154, (2017)
   

Yue WJ

Nie GJ et al., Enhancement of transesterification-catalyzing capability of bio-imprinted tannase in organic solvents by cryogenic protection and immobilization.
Journal of Molecular Catalysis B: Enzymatic, 94, 1-6, (2013)
   

Yue XD

Zhang TL et al., Selective adsorption of CuSO4 from mixed sulfate solutions by Cu(II) ion-imprinted polymers containing salicylaldoximes, ammonium cations, and tertiary amino groups.
Materials & Design, 107, 372-377, (2016)
   

Zhang TL et al., Synthesis of Cu(II) ion-imprinted polymers as solid phase adsorbents for deep removal of copper from concentrated zinc sulfate solution.
Hydrometallurgy, 169, 599-606, (2017)
   

Yue XF

Zhang J et al., Preparation of molecular imprinted monolithic extraction column and its application to strychnine analysis in Wan Tong Jin Gu troche by HPLC.
Journal of Liquid Chromatography & Related Technologies, 33, (6), 770-777, (2010)
   

Han YT et al., Preparation of lysozyme based molecularly imprinted polymers and its chromatographic evaluation.
Journal of Shaanxi Normal University (Natural Science Edition), 40, (4), 46-50, (2012)
   

Zhang J et al., Preparation and characterization of molecularly imprinted polymer of bovine serum albumin.
Journal of Applied Polymer Science, 124, (1), 723-728, (2012)
   

Yue XY

Lu LL et al., Template-synthesized ultra-thin molecularly imprinted polymers membrane for the selective preconcentration of dyes.
Journal of Materials Chemistry A, 3, (20), 10959-10968, (2015)
   

Yue XY et al., Selective electrochemical determination of tertiary butylhydroquinone in edible oils based on an in-situ assembly molecularly imprinted polymer sensor.
Food Chemistry, 289, 84-94, (2019)
   

Yue YC

Wu YC et al., On-line Determination of Cr3+ in Wastewater by Imprinting Chitosan Resin Solid phase Extraction Combined with Flow Injection Chemiluminescence.
Journal of Instrumental Analysis, 34, (6), 686-690, (2015)
   

Yue YM

Fu Y et al., Preparation and adsorption selectivity of rutin molecularly imprinted polymers.
Journal of Applied Polymer Science, 123, (2), 903-912, (2012)
   

Yue YZ

Boffa V et al., Sol-Gel Synthesis of a Biotemplated Inorganic Photocatalyst: A Simple Experiment for Introducing Undergraduate Students to Materials Chemistry.
Journal of Chemical Education, 89, (11), 1466-1469, (2012)
   

Yue ZF

Chen XX et al., Molecular imprinting technique and its application in separation of chiral pharmaceutical drugs.
Modern Chemical Industry, (z1), 245-247, (2003)
   

Chen XX et al., Preparation of chloramphenicol molecularly imprinted solid-phase extraction cartridge and the optimization of extraction conditions.
Journal of South China University of Technology (Natural Science Edition), 32, (7), 51-55, (2004)
   

Yulkifli

Sabrina N et al., Molecularly Imprinted Polymer (MIPs) Nanomaterials Modified as Absorbing Cholesterol.
Journal of Physics: Conference Series, 1788, (1), Article012001-(2021)
   

Yun C

So J et al., Adsorption of 1-naphthyl methyl carbamate in water by utilizing a surface molecularly imprinted polymer.
Chemical Physics Letters, 699, 199-207, (2018)
   

Yun LH

Meng ZH et al., The research of adsorption of organophosphorus toxicants on molecule imprinting polymers.
Chinese Journal of Analytical Chemistry, 28, (4), 432-435, (2000)
   

Yun MY

Zhang WY et al., A Novel Cu(II) Ion-Imprinted Alginate-Chitosan Complex Adsorbent for Selective Separation of Cu(II) from Aqueous Solution.
Polymer Bulletin, 76, (4), 1861-1876, (2019)
   

Yun YB

Yu LZ et al., Preparation, recognition characteristics and properties for quercetin molecularly imprinted polymers.
Desalination and Water Treatment, 34, (1-3), 309-314, (2011)
   

Yu LZ et al., Preparation and Application for Kaempferol Molecularly-imprinted Polymers.
Chemistry and Industry of Forest Products, 31, (4), 19-24, (2011)
   

Yun YB et al., Synthesis and Adsorption Performance of Molecularly Imprinted Microspheres for Quercetin by Suspension Polymerization.
Pharmaceutica Analytica Acta, 3, (3), Art.No. 151-(2012)
   

Zhang ZM et al., Preparation and adsorption performance of molecularly imprinted polymers for Kaempferol.
Desalination and Water Treatment, 51, (19-21), 3914-3919, (2013)
   

Huang ZJ et al., Surface molecularly imprinted polymer microspheres based on nano-TiO2 for selective recognition of kaempferol.
Journal of Applied Polymer Science, 134, (23), ArticleNo44888-(2017)
   

Huang ZJ et al., Preparing molecularly imprinted membranes by phase inversion to separate kaempferol.
Polymers for Advanced Technologies, 28, (10), 1207-1207, (2017)
   

Huang ZJ et al., Preparing molecularly imprinted membranes by phase inversion to separate kaempferol.
Polymers for Advanced Technologies, 28, (3), 373-378, (2017)
   

Xia Q et al., Preparation and characterization of monodisperse molecularly imprinted polymer microspheres by precipitation polymerization for kaempferol.
Designed Monomers and Polymers, 20, (1), 201-209, (2017)
   

Huang ZJ et al., Effects of different organic additives on kaempferol molecularly imprinted membrane properties.
Polymer Bulletin, 75, (2), 441-452, (2018)
   

Yun YG

Guo T et al., A double responsive smart upconversion fluorescence sensing material for glycoprotein.
Biosensors and Bioelectronics, 85, 596-602, (2016)
   

Yang YK et al., Electrochemiluminescence Analysis Based on Molecular Imprinting Technique.
Progress In Chemistry, 28, (9), 1351-1362, (2016)
   

Yun YG et al., Molecularly imprinted electrodeposition o-aminothiophenol sensor for selective and sensitive determination of amantadine in animal-derived foods.
Sensors and Actuators B: Chemical, 238, 32-39, (2017)
   

Pan MF et al., Reproducible Molecularly Imprinted QCM Sensor for Accurate, Stable, and Sensitive Detection of Enrofloxacin Residue in Animal-Derived Foods.
Food Analytical Methods, 11, (2), 495-503, (2018)
   

Yun YG et al., An electrodeposited molecularly imprinted quartz crystal microbalance sensor sensitized with AuNPs and rGO material for highly selective and sensitive detection of amantadine.
RSC Advances, 8, (12), 6600-6607, (2018)
   

Yun YH

Park HR et al., Synthesis of molecular imprinting polymers separating toluic acid isomers (II).
Journal of Polymers and the Environment, 13, (1), 81-86, (2005)
   

Yun YH et al., Preparation and characterization of molecularly imprinted polymers for the selective separation of 2, 4-dichlorophenoxyacetic acid.
Journal of Materials Science, 44, (22), 6206-6211, (2009)
   

Byun HS et al., Selective separation of aspirin using molecularly imprinted polymers.
Separation and Purification Technology, 74, (1), 144-153, (2010)
   

Tak HY et al., Sulindac imprinted mungbean starch/PVA biomaterial films as a transdermal drug delivery patch.
Carbohydrate Polymers, 208, 261-268, (2019)
   

Kim HS et al., Preparation and release properties of arbutin imprinted inulin/polyvinyl alcohol biomaterials.
International Journal of Biological Macromolecules, 161, 763-770, (2020)
   

Kim HS et al., Preparation and evaluation of functional allopurinol imprinted starch based biomaterials for transdermal drug delivery.
International Journal of Biological Macromolecules, 175, 217-228, (2021)
   

Yun YS

Lin S et al., Selective recovery of Pd(II) from extremely acidic solution using ion-imprinted chitosan fiber: Adsorption performance and mechanisms.
Journal of Hazardous Materials, 299, 10-17, (2015)
   

Yune Sung K

Cheong WJ et al., Recent applications of molecular imprinted polymers for enantio-selective recognition.
Talanta, 106, 45-59, (2013)
   

Yung KY

Cheung MC et al., Porous nanostructured encapsulation and immobilization materials for optical biosensors.
IEEE Journal on Selected Topics in Quantum Electronics, 18, (3), 1147-1159, (2012)
   

Yungerman I

Yungerman I et al., Factors contributing to binding-site imperfections in imprinted polymers.
Chemistry of Materials, 18, (3), 657-663, (2006)
   

Yankelov R et al., The selectivity of protein-imprinted gels and its relation to protein properties: A computer simulation study.
Journal of Molecular Recognition, 30, (7), ArticleNoe2607-(2017)
   

Yunjun Y

Jinyong Y et al., Strategies for exploiting microbial lipase resource and improving lipase biocatalyst--a review.
Acta Microbiologica Sinica, 48, (9), 1276-1281, (2008)
   

Yunoki T

Kawanami Y et al., Imprinted polymer catalysts for the hydrolysis of p-nitrophenyl acetate.
Journal of Molecular Catalysis A: Chemical, 145, (1-2), 107-110, (1999)
   

Yunzhe L

Guoning C et al., Preparation of molecularly imprinted polymers and application in a biomimetic biotin-avidin-ELISA for the detection of bovine serum albumin.
Talanta, 198, 55-62, (2019)
   

Yuphintharakun N

Yuphintharakun N et al., A nanocomposite optosensor containing carboxylic functionalized multiwall carbon nanotubes and quantum dots incorporated into a molecularly imprinted polymer for highly selective and sensitive detection of ciprofloxacin.
Spectrochimica Acta Part A-Molecular and Biomolecular Spctroscopy, 201, 382-391, (2018)
   

Yurchenko O

Bunina ZY et al., Sorption materials based on ethylene glycol dimethacrylate and methacrylic acid copolymers for rare earth elements extraction from aqueous solutions.
Adsorption Science & Technology, 35, (5-6), 545-559, (2017)
   

Yurrita P

Barrios CA et al., Molecularly imprinted polymer for label-free integrated optical waveguide bio(mimetic)sensors.
Sensors and Actuators B: Chemical, 161, (1), 607-614, (2012)
   

Yus M

Casado C et al., l- and d-Proline Adsorption by Chiral Ordered Mesoporous Silica.
Langmuir, 28, (16), 6638-6644, (2012)
   

Yusa SI

Plewa A et al., Molecularly Imprinted Hybrid Adsorbents for Adenine and Adenosine-5'-triphosphate.
Journal of Medicinal Chemistry, 55, (20), 8712-8720, (2012)
   

Mikulska A et al., Polymeric/silicagel hybrid molecularly photoimprinted adsorbents for adenosine and its derivatives.
European Polymer Journal, 59, 230-238, (2014)
   

Iwanowska A et al., Selective adsorption of modified nucleoside cancer biomarkers by hybrid molecularly imprinted adsorbents.
Journal of Separation Science, 39, (15), 3072-3080, (2016)
   

Yusof N

Yusof N et al., Preparation and Characterization of Molecularly Imprinted Polymer as SPE Sorbent for Melamine Isolation.
Polymers, 5, (4), 1215-1228, (2013)
   

Yusof NA

Yusof NA et al., Synthesis and Evaluation of a Molecularly Imprinted Polymer for Pb(II) Ion Uptake.
Pertanika Journal of Science and Technology, 17, (1), 155-161, (2009)
   

Zakaria ND et al., Synthesis and Evaluation of a Molecularly Imprinted Polymer for 2, 4-Dinitrophenol.
International Journal of Molecular Sciences, 10, (1), 354-365, (2009)
   

Yusof NA et al., Synthesis and Characterization of a Molecularly Imprinted Polymer for Pb2+ Uptake Using 2-vinylpyridine as the Complexing Monomer.
Sains Malaysiana, 39, (5), 829-835, (2010)
   

Asman S et al., Synthesis and characterization of a molecularly imprinted polymer for methylene blue.
Asian Journal of Chemistry, 23, (11), 4786-4794, (2011)
   

Zakaria ND et al., Synthesis and Characterization of a Molecularly Imprinted Polymer for 2, 4-Dinitrophenol Uptake Using 4-Vinylbenzoic Acid as the Complexing Monomer.
Asian Journal of Chemistry, 23, (6), 2456-2460, (2011)
   

Asman S et al., Synthesis and Characterization of Hybrid Molecularly Imprinted Polymer (MIP) Membranes for Removal of Methylene Blue (MB).
Molecules, 17, (2), 1916-1928, (2012)
   

Yusof NA et al., Synthesis and Characterization of Molecularly Imprinted Polymer Membrane for the Removal of 2, 4-Dinitrophenol.
International Journal of Molecular Sciences, 14, (2), 3993-4004, (2013)
   

Yusof NA et al., Preparation and Characterization of Molecular Imprinted Polymer for Melamine Based on Methacrylamide and 9-Vinylcarbazole as Complexing Monomer.
Asian Journal of Chemistry, 26, (8), 2285-2288, (2014)
   

Yze LH et al., Fabrication and Characterization of Molecularly Imprinted Polymer for Hg(II) Ion.
Asian Journal of Chemistry, 26, (16), 5029-5032, (2014)
   

Khairi NAS et al., Removal of Toxic Mercury from Petroleum Oil by Newly Synthesized Molecularly-Imprinted Polymer.
International Journal of Molecular Sciences, 16, (5), 10562-10577, (2015)
   

Yeoh CB et al., Study Toward the Preparation of Aqueous Compatible Shikimic Acid Imprinted Polymer.
Journal of Oil Palm Research, 27, (1), 90-96, (2015)
   

Beng YC et al., Elucidation of type of molecular interactions for the imprinting of shikimic acid.
Journal of Oil Palm Research, 28, (3), 353-358, (2016)
   

Rahman SKA et al., Correction: Evaluation of porogen factors for the preparation of ion imprinted polymer monoliths used in mercury removal.
PLoS ONE, 13, (11), Article_e0208242-(2018)
   

Rahman SKA et al., Evaluation of porogen factors for the preparation of ion imprinted polymer monoliths used in mercury removal.
PLoS ONE, 13, (4), ArticleNoe0195546-(2018)
   

Yusof NF

Mehamod FS et al., The development of molecular imprinting technology for caffeine extraction.
International Journal of Technology, 6, (4), 546-554, (2015)
   

Othman NA et al., Isotherm Studies of Pyrogallol-imprinted Polymers via Precipitation Polymerization.
International Journal of Technology, 8, (1), 37-47, (2017)
   

Yusof NF et al., Ion-imprinted polymer-based on picolinic acid as a co-functional monomer for highly selective sorption of Cu(II) ions in an aqueous solution.
AIP Conference Proceedings, 1885, (1), ArticleNo020017-(2017)
   

Yusof NF et al., Characteristics of adsorption isotherm and kinetic study for newly prepared Co2+-imprinted polymer linkage with dipicolinic acid.
IOP Conference Series: Materials Science and Engineering, 440, ArticleNo.012005-(2018)
   

Yusof NF et al., Fabrication and binding characterization of ion imprinted polymers for highly selective Co2+ ions in an aqueous medium.
Journal of Environmental Chemical Engineering, 7, (2), Article103007-(2019)
   

Yusof NNM

Ibrahim MNM et al., Purification of vanillin by a molecular imprinting polymer technique.
Separation and Purification Technology, 66, (3), 450-456, (2009)
   

Yusof NNM et al., Ionic Imprinted Calix[4]resorcinarene Host for Pb(II) Adsorbent Using Diallylaminomethyl-Calix[4]resorcinarene Copolymer.
Chemistry Letters, 42, (10), 1119-1121, (2013)
   

Yusof NNM et al., Efficient Separation on Vanillin Operated with Permeability Performance of Hollow Fiber Membranes Embedded Vanillin Imprinted Polymer Particles.
Industrial & Engineering Chemistry Research, 52, (47), 16951-16957, (2013)
   

Yusof NNM et al., Molecularly imprinted polymer particles having coordinated hydrogen bonding in covalent-imprinting for efficient recognition towards vanillin.
Separation and Purification Technology, 122, 341-349, (2014)
   

Yusof NNM et al., Ionic Imprinting Polymers Using Diallylaminomethyl-Calix[4] Resorcinarene Host for the Recognition of Pb (II) Ions.
Polymers & Polymer Composites, 24, (9), 687-694, (2016)
   

Yusoff MM

Mustapa NRN et al., Ion imprinted polymers for selective recognition and separation of lanthanum and cerium ions from other lanthanide.
Separation Science and Technology, 51, (17), 2762-2771, (2016)
   

Yusoff MM et al., Synthesis of ion imprinted polymers for selective recognition and separation of rare earth metals.
Journal of Rare Earths, 35, (2), 177-186, (2017)
   

Yusuf Y

Aba L et al., Selectivity Improvement of Gas Sensor Based on Poly(3, 4-ethylenedioxythiophene):Poly(styrenesulfonate) Thin Film by Using Imprinting Method.
Journal of Modern Physics, 3, (7), 529-533, (2012)
   

Yutthalekha T

Yutthalekha T et al., Enantioselective Recognition of DOPA by Mesoporous Platinum Imprinted with Mandelic Acid.
Electroanalysis, 27, (9), 2209-2213, (2015)
   

Yutthalekha T et al., Asymmetric synthesis using chiral-encoded metal.
Nature Communications, ArticleNo12678-(2016)
   

Yze LH

Yze LH et al., Fabrication and Characterization of Molecularly Imprinted Polymer for Hg(II) Ion.
Asian Journal of Chemistry, 26, (16), 5029-5032, (2014)
   

Yáñez-Sedeño P

Mena ML et al., Molecularly imprinted polymers for on-line clean up and preconcentration of chloramphenicol prior to its voltammetric determination.
Analytical and Bioanalytical Chemistry, 376, (1), 18-25, (2003)
   

Yáñez-Sedeño P et al., Electrochemical sensors based on magnetic molecularly imprinted polymers: A review.
Analytica Chimica Acta, 960, 1-17, (2017)
   

Yöntem FD

Yasar M et al., Polymeric nanoparticles for selective protein recognition by using thiol-ene miniemulsion photopolymerization.
Journal of Biomaterials Science-Polymer Edition, 31, (16), 2044-2059, (2020)
   

Yüce S

Kalim R et al., Catalysis of a beta-elimination applying membranes with incorporated molecularly imprinted polymer particles.
Polymer Bulletin, 55, (4), 287-297, (2005)
   

Yücebas BB

Yücebas BB et al., Molecular imprinted polymer based electrochemical sensor for selective detection of paraben.
Sensors and Actuators B: Chemical, 305, Article127368-(2020)
   

Yücel N

Yücel N et al., Proceeding, Synthesis and characterization of molecularly imprinted polymer from renewable sources, 
1-4, (2021)
   

Yüksek H

Akyildirim O et al., Palladium nanoparticles functionalized graphene quantum dots with molecularly imprinted polymer for electrochemical analysis of citrinin.
Journal of Molecular Liquids, 243, 677-681, (2017)
   

Beytur M et al., A highly selective and sensitive voltammetric sensor with molecularly imprinted polymer based silver@gold nanoparticles/ionic liquid modified glassy carbon electrode for determination of ceftizoxime.
Journal of Molecular Liquids, 251, 212-217, (2018)