W087

Book chapter, Wulff G, Biomimetic reactions using organized polymeric supports, 
In: Biomimetic Polymers, Gebelein CG (Ed.) 
Plenum Press: New York, 1-14, (1990)    

W086

Wulff G et al., Chromatographische Racemat-Trennung an Adsorbentien mit chiralen Hohlräumen.
GIT Labor-Fachzeitschrift, 35, 10-17, (1991)
   

W088

Book chapter, Wulff G, Polymer assisted molecular recognition: The current understanding of the molecular imprinting procedure, 
In: Bioorganic Chemistry in Healthcare and Technology, Pandit UK, Alderweireldt FC (Eds.) 
Plenum Press: New York, 55-68, (1991)    

W089

Book chapter, Wulff G, Biorecognition in molecularly imprinted polymers. Concept, chemistry, and application, 
In: Molecular Interactions in Bioseparations, Ngo T (Ed.) 
Plenum Press: New York, 363-381, (1993)    

W

Uezu K et al., Novel metal ion-imprinted resins prepared by surface template polymerization with W/O emulsion.
Journal of Chemical Engineering of Japan, 27, (3), 436-438, (1994)
   

W090

Book chapter, Wulff G, Imprinting techniques in synthetic polymers - New options for chemosensors, 
In: Frontiers in Biosensorics I.Fundamental Aspects, Scheller FW, Schubert F, Fedrowitz J (Eds.) 
Birkhäuser Verlag: Basel, Switzerland, 13-26, (1997)    

W

Chen YB et al., Influence of the pH on the behavior of an imprinted polymeric stationary phase - supporting evidence for a binding site model.
Journal of Chromatography A, 927, (1-2), 1-17, (2001)
   

W

Chen YB et al., Influence of the pH on the behavior of an imprinted polymeric stationary phase - supporting evidence for a binding site model.
Journal of Chromatography A, 927, (1-2), 1-17, (2001)
   

W

Ramamoorthy M et al., Molecular imprinting of cellulose acetate-sulfonated polysulfone blend membranes for Rhodamine B by phase inversion technique.
Journal of Membrane Science, 217, (1-2), 207-214, (2003)
   

W

Ramamoorthy M et al., Molecular imprinting of cellulose acetate-sulfonated polysulfone blend membranes for Rhodamine B by phase inversion technique.
Journal of Membrane Science, 217, (1-2), 207-214, (2003)
   

W

Toorisaka E et al., A molecularly imprinted polymer that shows enzymatic activity.
Biochemical Engineering Journal, 14, (2), 85-91, (2003)
   

W

Ou SH et al., Polyacrylamide gels with electrostatic functional groups for the molecular imprinting of lysozyme.
Analytica Chimica Acta, 504, (1), 163-166, (2004)
   

W

Ou SH et al., Polyacrylamide gels with electrostatic functional groups for the molecular imprinting of lysozyme.
Analytica Chimica Acta, 504, (1), 163-166, (2004)
   

W

Ornelas M et al., Synthesis of glycylglycine-imprinted silica microspheres through different water-in-oil emulsion techniques.
Journal of Chromatography A, 1297, 138-145, (2013)
   

W

Ornelas M et al., Naproxen-imprinted xerogels in the micro- and nanospherical forms by emulsion technique.
Journal of Chromatography A, 1422, 43-52, (2015)
   

W

Ornelas M et al., Acylated-naproxen as the surface-active template in the preparation of micro- and nanospherical imprinted xerogels by emulsion techniques.
Journal of Chromatography A, 1437, 107-115, (2016)
   

Wacker oxidation

Karakhanov EA et al., Design of supramolecular metal complex catalytic systems for petrochemical and organic synthesis.
Russian Chemical Bulletin, 57, (4), 780-792, (2008)
   

Wacker-oxidation

Karakhanov EA et al., Molecular imprinting technique for the design of cyclodextrin based materials and their application in catalysis.
Current Organic Chemistry, 14, (13), 1284-1295, (2010)
   

WALLED CARBON NANOTUBES

Ariga K, Template-assisted nano-patterning: From the submicron scale to the submolecular level.
Journal of Nanoscience and Nanotechnology, 4, (1-2), 23-34, (2004)
   

WALLED CARBON NANOTUBES

Hua F et al., Polymer imprint lithography with molecular-scale resolution.
Nano Letters, 4, (12), 2467-2471, (2004)
   

walnuts

Kalogiouri NP et al., A green molecular imprinted solid-phase extraction protocol for bisphenol A monitoring with HPLC-UV to guarantee the quality and safety of walnuts under different storage conditions.
Journal of Separation Science, 44, (8), 1633-1640, (2021)
   

Warfare agent

Book chapter, Sharma PSet al., Molecular Imprinting for Selective Sensing of Explosives, Warfare Agents, and Toxins, 
In: Portable Chemical Sensors, Nikolelis D (Ed.) 
Springer Netherlands: 63-94, (2012)    

Warfare agents

Pavel D et al., Computationally designed monomers for molecular imprinting of chemical warfare agents - Part V.
Polymer, 47, (25), 8389-8399, (2006)
   

Warfarin

Nateghi MR et al., Imprinted Poly(o-phenylenediamine-co-aniline) Electrode for Warfarin Assay in Human Samples by Differential Pulse Voltammetry.
Asian Journal of Chemistry, 22, (5), 3516-3524, (2010)
   

Warfarin

Nicholls IA et al., Warfarin: an environment-dependent switchable molecular probe.
Journal of Molecular Recognition, 23, (6), 604-608, (2010)
   

Warfarin

Rosengren AM et al., In situ detection of warfarin using time-correlated single-photon counting.
Biochemical and Biophysical Research Communications, 407, (1), 60-62, (2011)
   

Warfarin

Rosengren AM et al., Consequences of Morphology on Molecularly Imprinted Polymer-Ligand Recognition.
International Journal of Molecular Sciences, 14, (1), 1207-1217, (2013)
   

Warfarin

Peyrovi M et al., Synthesis of molecularly imprinted polypyrrole as an adsorbent for solid-phase extraction of warfarin from human plasma and urine.
Biomedical Chromatography, 29, (11), 1623-1628, (2015)
   

Warfarin

Nakamura Y et al., Preparation of molecularly imprinted polymers for warfarin and coumachlor by multi-step swelling and polymerization method and their imprinting effects.
Journal of Chromatography A, 1516, 71-78, (2017)
   

Warfarin

Giovannoli C et al., Affinity Capillary Electrochromatography of Molecularly Imprinted Thin Layers Grafted onto Silica Capillaries Using a Surface-Bound Azo-Initiator and Living Polymerization.
Polymers, 10, (2), ArticleNo192-(2018)
   

Warfarin

Haginaka J et al., Retention and molecular-recognition mechanisms of molecularly imprinted polymers for warfarin derivatives and their application for the determination of warfarin in human serum.
Talanta, 232, Article122419-(2021)
   

Warfarin

Kubo A et al., Enantioseparation of warfarin derivatives on molecularly imprinted polymers for (S)- and (R)-chlorowarfarin.
Journal of Chromatography A, 1641, Article461995-(2021)
   

Warfarin determination

Rezaei B et al., An electrochemical sensor based on multiwall carbon nanotubes and molecular imprinting strategy for warfarin recognition and determination.
Sensors and Actuators B: Chemical, 196, 539-545, (2014)
   

Warfarin pseudo template

Huang ZP et al., Synthesis and application of magnetic-surfaced pseudo molecularly imprinted polymers for zearalenone pretreatment in cereal samples.
Food Chemistry, 308, Article125696-(2020)
   

Warfarin sodium

Liu J et al., Electrochemical microfluidic chip based on molecular imprinting technique applied for therapeutic drug monitoring.
Biosensors and Bioelectronics, 91, 714-720, (2017)
   

Washing

Yilmaz Y et al., How the internal structures of the imprinted and the random hydrogels change upon washing?
Journal of Sol-Gel Science and Technology, 80, (1), 77-86, (2016)
   

waste

Randhawa M et al., Imprinted polymers for water purification.
Journal of Applied Polymer Science, 106, (5), 3321-3326, (2007)
   

Waste minimization

Lazar MM et al., Could the porous chitosan-based composite materials have a chance to a "NEW LIFE" after Cu(II) ion binding?
International Journal of Biological Macromolecules, 131, 134-146, (2019)
   

Waste utilization

Wu SR et al., The ion-imprinted oyster shell material for targeted removal of Cd(II) from aqueous solution.
Journal of Environmental Management, 302, Article114031-(2022)
   

WASTE- WATER

de Alda MJL et al., Liquid chromatography-(tandem) mass spectrometry of selected emerging pollutants (steroid sex hormones, drugs and alkylphenolic surfactants) in the aquatic environment.
Journal of Chromatography A, 1000, (1-2), 503-526, (2003)
   

Wastewater

Beltran A et al., Synthesis and application of a carbamazepine-imprinted polymer for solid-phase extraction from urine and wastewater.
Analytica Chimica Acta, 597, (1), 6-11, (2007)
   

Wastewater

Sun Z et al., Selective trace analysis of diclofenac in surface and wastewater samples using solid-phase extraction with a new molecularly imprinted polymer.
Analytica Chimica Acta, 620, (1-2), 73-81, (2008)
   

Wastewater

González-Mariño I et al., Comparison of molecularly imprinted, mixed-mode and hydrophilic balance sorbents performance in the solid-phase extraction of amphetamine drugs from wastewater samples for liquid chromatography-tandem mass spectrometry determination.
Journal of Chromatography A, 1216, (48), 8435-8441, (2009)
   

Wastewater

Nemulenzi O et al., Potential of combining of liquid membranes and molecularly imprinted polymers in extraction of 17beta-estradiol from aqueous samples.
Journal of Separation Science, 32, (11), 1941-1948, (2009)
   

Wastewater

Valtchev M et al., Development of sulfamethoxazole-imprinted polymers for the selective extraction from waters.
Journal of Hazardous Materials, 170, (2-3), 722-728, (2009)
   

Wastewater

Proceeding, Li ZC et al, Application of Imprinted Functionalized Silica Gel Sorbent for Selective Removal of Cadmium (II) from Industial Wastewaters, 
In: Advanced Materials Research, Yushu Z (Ed.), 
441-444, (2011)
   

Wastewater

Prieto A et al., Synthesis of a molecularly imprinted polymer and its application for microextraction by packed sorbent for the determination of fluoroquinolone related compounds in water.
Analytica Chimica Acta, 685, (2), 146-152, (2011)
   

Wastewater

Saifuddin N et al., Microwave enhanced synthesis of chitosan-graft-polyacrylamide molecular imprinting polymer for selective removal of 17β-estradiol at trace concentration.
Asian Journal of Biochemistry, 6, (1), 38-54, (2011)
   

Wastewater

Murray A et al., Application of molecularly imprinted and non-imprinted polymers for removal of emerging contaminants in water and wastewater treatment: a review.
Environmental Science and Pollution Research, 19, (9), 3820-3830, (2012)
   

Wastewater

Warwick C et al., Sensing and analysis of soluble phosphates in environmental samples: A review.
Biosensors and Bioelectronics, 41, 1-11, (2013)
   

Wastewater

Bello OS et al., Sequestering Nickel (II) Ions from Aqueous Solutions Using Various Adsorbents: A Review.
Pakistan Journal of Analytical and Environmental Chemistry, 15, (1), 1-17, (2014)
   

Wastewater

Malihe KS et al., Magnetite molecularly imprinted nanoparticles for selective detection of phenol in wastewater samples followed by high performance liquid chromatography.
Indian Journal of Scientific Research, 5, (1), 362-368, (2014)
   

Wastewater

Warwick C et al., A molecular imprinted polymer based sensor for measuring phosphate in wastewater samples.
Water Science & Technology, 69, (1), 48-54, (2014)
   

Wastewater

Warwick C et al., Conductance based sensing and analysis of soluble phosphates in wastewater.
Biosensors and Bioelectronics, 52, 173-179, (2014)
   

Wastewater

Atar N et al., A sensitive molecular imprinted surface plasmon resonance nanosensor for selective determination of trace triclosan in wastewater.
Sensors and Actuators B: Chemical, 216, 638-644, (2015)
   

Wastewater

Gupta VK et al., Selective QCM sensor based on atrazine imprinted polymer: Its application to wastewater sample.
Sensors and Actuators B: Chemical, 218, 215-221, (2015)
   

Wastewater

Zarejousheghani M et al., Ion-exchange molecularly imprinted polymer for the extraction of negatively charged acesulfame from wastewater samples.
Journal of Chromatography A, 1411, 23-33, (2015)
   

Wastewater.

Figueiredo L et al., Applications of molecularly imprinted polymers to the analysis and removal of personal care products: A review.
Talanta, 146, 754-765, (2016)
   

Wastewater

Okutucu B et al., Decolorization of textile wastewater by dye-imprinted polymer.
Desalination and Water Treatment, 57, (45), 21577-21584, (2016)
   

Wastewater

Book chapter, Kaur Jet al., Need for the Advanced Technologies for Wastewater Treatment, 
In: Advances in Environmental Biotechnology, Kumar R, Sharma AK, Ahluwalia SS (Eds.) 
Springer: Singapore, 39-52, (2017)    

Wastewater

Luo XB et al., Lithium ion-imprinted polymers with hydrophilic PHEMA polymer brushes: The role of grafting density in anti-interference and anti-blockage in wastewater.
Journal of Colloid and Interface Science, 492, 146-156, (2017)
   

Wastewater

Madikizela LM et al., Occurrence of naproxen, ibuprofen, and diclofenac residues in wastewater and river water of KwaZulu-Natal Province in South Africa.
Environmental Monitoring and Assessment, 189, (7), ArticleNo348-(2017)
   

Wastewater

Stevens MGF et al., Multi-templated Pb-Zn-Hg Ion Imprinted Polymer for the Selective and Simultaneous Removal of Toxic Metallic Ions from Wastewater.
International Journal of Chemistry, 9, (2), 10-22, (2017)
   

Wastewater

Zunngu SS et al., Synthesis and application of a molecularly imprinted polymer in the solid-phase extraction of ketoprofen from wastewater.
Comptes Rendus Chimie, 20, (5), 585-591, (2017)
   

Wastewater

Awokoya KN et al., Extraction of Pyrocatechol from pharmaceutical wastewater through Adsorption Using Molecularly Imprinted Polymer prepared from Methacrylic Acid Monomer.
Journal of Chemical Society of Nigeria, 43, (3), 530-539, (2018)
   

Wastewater

de León-Martínez LD et al., Synthesis and Evaluation of a Molecularly Imprinted Polymer for the Determination of Metronidazole in Water Samples.
Bulletin of Environmental Contamination and Toxicology, 100, (3), 395-401, (2018)
   

Wastewater

Book chapter, Keçili Ret al., Tailor-Made Molecular Traps for the Treatment of Environmental Samples, 
In: Handbook of Environmental Materials Management, Hussain CM (Ed.) 
Springer International Publishing: Cham, 1-22, (2018)    

Wastewater

Mbhele ZE et al., Synthesis of a molecularly imprinted polymer and its application in selective extraction of fenoprofen from wastewater.
Environmental Science and Pollution Research, 25, (36), 36724-36735, (2018)
   

Wastewater

Ncube S et al., Development of a single format membrane assisted solvent extraction-molecularly imprinted polymer technique for extraction of polycyclic aromatic hydrocarbons in wastewater followed by gas chromatography mass spectrometry determination.
Journal of Chromatography A, 1569, 36-43, (2018)
   

Wastewater

Hüseynli S et al., Molecular Imprinted Based Quartz Crystal Microbalance Nanosensors for Mercury Detection.
Global Challenges, 3, (3), Article1800071-(2019)
   

Wastewater

Motia S et al., Electrochemical sensor based on molecularly imprinted polymer for sensitive triclosan detection in wastewater and mineral water.
Science of The Total Environment, 664, 647-658, (2019)
   

Wastewater

Shi T et al., CdTe quantum dots coated with a molecularly imprinted polymer for fluorometric determination of norfloxacin in seawater.
Microchimica Acta, 186, (6), Article362-(2019)
   

Wastewater

Bakhshpour M et al., Highly sensitive detection of Cd(II) ions using ion-imprinted surface plasmon resonance sensors.
Microchemical Journal, 159, Article105572-(2020)
   

Wastewater

Motia S et al., Synthesis and characterization of a highly sensitive and selective electrochemical sensor based on molecularly imprinted polymer with gold nanoparticles modified screen-printed electrode for glycerol determination in wastewater.
Talanta, 216, Article120953-(2020)
   

Wastewater

Husin NA et al., Application of a new choline-imidazole based deep eutectic solvents in hybrid magnetic molecularly imprinted polymer for efficient and selective removal of naproxen from aqueous samples.
Materials Chemistry and Physics, 261, Article124228-(2021)
   

Waste water analysis

Gros M et al., Trace level determination of β-blockers in waste waters by highly selective molecularly imprinted polymers extraction followed by liquid chromatography-quadrupole-linear ion trap mass spectrometry.
Journal of Chromatography A, 1189, (1-2), 374-384, (2008)
   

Wastewater reclamation

Zhang WL et al., Performance evaluation and application of surface-molecular-imprinted polymer-modified TiO2 nanotubes for the removal of estrogenic chemicals from secondary effluents.
Environmental Science and Pollution Research, 20, (3), 1431-1440, (2013)
   

Wastewaters

Gilart N et al., Determination of pharmaceuticals in wastewaters using solid-phase extraction-liquid chromatography-tandem mass spectrometry.
Journal of Separation Science, 35, (7), 875-882, (2012)
   

Wastewaters

Gilart N et al., A rapid determination of acidic pharmaceuticals in environmental waters by molecularly imprinted solid-phase extraction coupled to tandem mass spectrometry without chromatography.
Talanta, 110, 196-201, (2013)
   

wastewater sludge

Ncube S et al., Development and optimisation of a novel three-way extraction technique based on a combination of Soxhlet extraction, membrane assisted solvent extraction and a molecularly imprinted polymer using sludge polycyclic aromatic hydrocarbons as model compounds.
Journal of Separation Science, 41, (4), 918-928, (2018)
   

wastewater treatment

Su HJ et al., Preparation of a surface molecular-imprinted adsorbent for Ni2+ based on Penicillium chrysogenum.
Journal of Chemical Technology & Biotechnology, 80, (4), 439-444, (2005)
   

wastewater treatment

Su HJ et al., Biosorption of Ni2+ by the surface molecular imprinting adsorbent.
Process Biochemistry, 41, (6), 1422-1426, (2006)
   

Waste-water treatment

Huo HY et al., Adsorption of Ag+ by a surface molecular-imprinted biosorbent.
Chemical Engineering Journal, 150, (1), 139-144, (2009)
   

Waste-water treatment

Huo HY et al., Effect of trace Ag+ adsorption on degradation of organic dye wastes.
Biochemical Engineering Journal, 43, (1), 2-7, (2009)
   

wastewater treatment

Xiao HH et al., Progress of the application of molecular imprinting technique in environmental field.
Chemistry Bulletin, 72, (8), 701-706, (2009)
   

wastewater treatment

Chen EZ et al., Antimicrobial properties of silver nanoparticles synthesized by bioaffinity adsorption coupled with TiO2 photocatalysis.
Journal of Chemical Technology & Biotechnology, 86, (3), 421-427, (2011)
   

wastewater treatment

Meng ZH et al., Removal of 2,4,6-Trinitrotoluene from ’Pink Water’ Using Molecularly-Imprinted Absorbent.
Propellants, Explosives, Pyrotechnics, 37, (1), 100-106, (2012)
   

wastewater treatment

Proceeding, Yang SF et al, The Latest Applications of Chitin and Chitosan in Wastewater Treatment, 
In: Advanced Materials Research, Shi YX, Wan AJ (Eds.), 
151-157, (2013)
   

wastewater treatment

Huang DL et al., Application of molecularly imprinted polymers in wastewater treatment: a review.
Environmental Science and Pollution Research, 22, (2), 963-977, (2015)
   

wastewater treatment

Book chapter, Mattiasson B, MIPs as Tools in Environmental Biotechnology, 
In: Molecularly Imprinted Polymers in Biotechnology, Mattiasson B, Ye L (Eds.) 
Springer: Berlin,Heidelberg, 183-205, (2015)    

wastewater treatment

Franco JH et al., Assessment of molecularly imprinted polymers (MIPs) in the preconcentration of disperse red 73 dye prior to photoelectrocatalytic treatment.
Environmental Science and Pollution Research, 24, (4), 4134-4143, (2017)
   

wastewater treatment

He R et al., Design and fabrication of highly ordered ion imprinted SBA-15 and MCM-41 mesoporous organosilicas for efficient removal of Ni2+ from different properties of wastewaters.
Microporous And Mesoporous Materials, 257, 212-221, (2018)
   

wastewater treatment

Mohammadzadeh Pakdel P et al., Review on recent progress in chitosan-based hydrogels for wastewater treatment application.
Carbohydrate Polymers, 201, 264-279, (2018)
   

wastewater treatment

Hu YT et al., A simple on-line detection system based on fiber-optic sensing for the realtime monitoring of fixed bed adsorption processes of molecularly imprinted polymers.
Journal of Chromatography A, 1622, Article461112-(2020)
   

wastewater treatment

Wu JY et al., Highly ordered molecularly imprinted mesoporous silica for selective removal of bisphenol A from wastewater.
Journal of Separation Science, 43, (5), 987-995, (2020)
   

wastewater treatment

Elmasry MR et al., Ultrasensitive detection and removal of carbamazepine in wastewater using UCNPs functionalized with thin-shell MIPs.
Microchemical Journal, 170, Article106674-(2021)
   

wastewater treatment

Li XT et al., Targeted degradation of refractory organic compounds in wastewaters based on molecular imprinting catalysts.
Water Research, 203, Article117541-(2021)
   

Wastewater treatment plants

Madikizela LM et al., Determination of ibuprofen, naproxen and diclofenac in aqueous samples using a multi-template molecularly imprinted polymer as selective adsorbent for solid-phase extraction.
Journal of Pharmaceutical and Biomedical Analysis, 128, 210-215, (2016)
   

water

Erlenmeyer H et al., Über spezifisch adsorbierende Silicagele IV.
Helvetica Chimica Acta, 48, (2), 301-303, (1965)
   

water

Rackow B, Imprinting of molecular information on surfaces of organic high polymers.
Zeitschrift für Chemie, 7, (10), 398-399, (1967)
   

water

Belokon YN et al., Biomimetic approach to the design of a pyridoxal enzyme model 1. Hydrophilic polyacrylamide gel with stereochemically defined arrangements of salicaldehyde and lysine fragments.
Makromolekulare Chemie-Macromolecular Chemistry And Physics, 181, (10), 2183-2197, (1980)
   

water

Braco L et al., Production of abiotic receptors by molecular imprinting of proteins.
Proceedings of the National Academy of Sciences of the United States of America, 87, (1), 274-277, (1990)
   

water

Dabulis K et al., Design of novel receptors by molecular imprinting of proteins.
Abstracts of Papers of the American Chemical Society, 200, (BIOT), 28-28, (1990)
   

water

Rosatzin T et al., Preparation of Ca2+ selective sorbents by molecular imprinting using polymerizable ionophores.
Journal of the Chemical Society-Perkin Transactions 2, (8), 1261-1265, (1991)
   

water

Dabulis K et al., Molecular imprinting of proteins and other macromolecules resulting in new adsorbents.
Biotechnology and Bioengineering, 39, (2), 176-185, (1992)
   

water

Gupta MN, Enzyme function in organic solvents.
European Journal of Biochemistry, 203, (1-2), 25-32, (1992)
   

water

Sellergren B, Imprinted dispersion polymers - a new class of easily accessible affinity stationary phases.
Journal of Chromatography A, 673, (1), 133-141, (1994)
   

water

Matsui J et al., A molecularly imprinted synthetic polymer receptor selective for atrazine.
Analytical Chemistry, 67, (23), 4404-4408, (1995)
   

water

Nicholls IA et al., Insights into the role of the hydrogen-bond and hydrophobic effect on recognition in molecularly imprinted polymer synthetic peptide receptor mimics.
Journal of Chromatography A, 691, (1-2), 349-353, (1995)
   

water

Dauwe C et al., Influence of template basicity and hydrophobicity on the molecular recognition properties of molecularly imprinted polymers.
Journal of Chromatography A, 753, (2), 191-200, (1996)
   

water

Siemann M et al., Selective recognition of the herbicide atrazine by noncovalent molecularly imprinted polymers.
Journal of Agricultural and Food Chemistry, 44, (1), 141-145, (1996)
   

water

Wang HY et al., Molecular imprint membranes prepared by the phase inversion precipitation technique.
Langmuir, 12, (20), 4850-4856, (1996)
   

water

Asanuma H et al., Molecularly imprinted polymer of b-cyclodextrin for the efficient recognition of cholesterol.
Chemical Communications, (20), 1971-1972, (1997)
   

water

Herrmann W et al., Supramolecular control of the photochemistry of stilbenes by cyclodextrins.
Chemical Communications, (18), 1709-1710, (1997)
   

water

Kobayashi T et al., Molecularly imprinted membranes by a phase inversion method.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 155-155, (1997)
   

water

Lion-Dagan M et al., Nitrospiropyran-modified a-chymotrypsin, a photostimulated biocatalyst in an organic solvent: effects of bioimprinting.
Journal of Photochemistry and Photobiology A-Chemistry, 108, (2-3), 247-252, (1997)
   

water

Matsui J et al., Solid-phase extraction of a triazine herbicide using a molecularly imprinted synthetic receptor.
Analytical Communications, 34, (3), 85-87, (1997)
   

water

Pichon V, Environmental sample treatment: Evolution and perspectives.
Analusis, 25, 101-106, (1997)
   

water

Wang HY et al., Molecular imprint membranes prepared by the phase inversion precipitation technique .2. Influence of coagulation temperature in the phase inversion process on the encoding in polymeric membranes.
Langmuir, 13, (20), 5396-5400, (1997)
   

water

Asanuma H et al., Synthesis of molecularly imprinted polymer of b-cyclodextrin for the efficient recognition of cholesterol.
Supramolecular Science, 5, (3-4), 417-421, (1998)
   

water

Dickert FL et al., Molecular imprinting through van der Waals interactions: Fluorescence detection of PAHs in water.
Advanced Materials, 10, (2), 149-151, (1998)
   

water

Haupt K et al., Assay system for the herbicide 2,4-dichlorophenoxyacetic acid using a molecularly imprinted polymer as an artificial recognition element.
Analytical Chemistry, 70, (3), 628-631, (1998)
   

water

Masqué N et al., New polymeric and other types of sorbents for solid-phase extraction of polar organic micropollutants from environmental water.
TrAC Trends in Analytical Chemistry, 17, (6), 384-394, (1998)
   

water

Sellergren B et al., Imprinted polymers for selective adsorption of cholesterol from gastrointestinal fluids.
Chemistry of Materials, 10, (12), 4037-4046, (1998)
   

water

Adbo K et al., Enantioselective Tröger’s base synthetic receptors.
Bioorganic Chemistry, 27, (5), 363-371, (1999)
   

water

Baba Y et al., Highly selective adsorption resins. Part 4. Synthesis of chitosan derivatives and their adsorption properties for nitrate anion.
Nippon Kagaku Kaishi, (7), 467-472, (1999)
   

water

Ferrer I et al., Validation of new solid-phase extraction materials for the selective enrichment of organic contaminants from environmental samples.
TrAC Trends in Analytical Chemistry, 18, (3), 180-192, (1999)
   

water

Kanekiyo Y et al., "Molecular-imprinting" of AMP utilising the polyion complex formation process as detected by a QCM system.
Journal of the Chemical Society-Perkin Transactions 2, (12), 2719-2722, (1999)
   

water

Kanekiyo Y et al., "Molecular-imprinting" in polyion complexes which creates the "memory" for the AMP template.
Journal of the Chemical Society-Perkin Transactions 2, (3), 557-561, (1999)
   

water

Mohr GJ et al., Reversible chemical reactions as the basis for optical sensors used to detect amines, alcohols and humidity.
Journal of Materials Chemistry, 9, (9), 2259-2264, (1999)
   

water

Peissker F et al., Crosslinking of imprinted proteases to maintain a tailor-made substrate selectivity in aqueous solutions.
Bioorganic & Medicinal Chemistry, 7, 2231-2237, (1999)
   

water

Snowden TS et al., Anion recognition: synthetic receptors for anions and their application in sensors.
Current Opinion in Chemical Biology, 3, 740-746, (1999)
   

water

Sreenivasan K, On the application of molecularly imprinted poly(HEMA) as a template responsive release system.
Journal of Applied Polymer Science, 71, (11), 1819-1821, (1999)
   

water

Asanuma H et al., Tailor-made receptors by molecular imprinting.
Advanced Materials, 12, (14), 1019-1030, (2000)
   

water

Kanekiyo Y et al., Novel nucleotide-responsive hydrogels designed from copolymers of boronic acid and cationic units and their applications as a QCM resonator system to nucleotide sensing.
Journal of Polymer Science Part A: Polymer Chemistry, 38, (8), 1302-1310, (2000)
   

water

Markowitz MA et al., Effects of added organosilanes on the formation and adsorption properties of silicates surface-imprinted with an organophosphonate.
Langmuir, 16, (15), 6148-6155, (2000)
   

water

Sabik H et al., Multiresidue methods using solid-phase extraction techniques for monitoring priority pesticides, including triazines and degradation products, in ground and surface waters.
Journal of Chromatography A, 885, (1-2), 217-236, (2000)
   

water

Stevenson D, Immuno-affinity solid-phase extraction.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 745, (1), 39-48, (2000)
   

water

Takeuchi T et al., Miniaturized molecularly imprinted continuous polymer rods.
HRC - Journal of High Resolution Chromatography, 23, (1), 44-46, (2000)
   

water

Yoshida M et al., Metal-imprinted microsphere prepared by surface template polymerization and its application to chromatography.
Journal of Polymer Science Part A: Polymer Chemistry, 38, (4), 689-696, (2000)
   

water

Akiyama T et al., Molecular imprinting of cyclodextrin on silica-gel support for the stationary phase of high-performance-liquid-chromatography.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 41, (1-4), 149-153, (2001)
   

water

Asanuma H et al., Molecular imprinting of cyclodextrin in water for the recognition of nanometer-scaled guests.
Analytica Chimica Acta, 435, (1), 25-33, (2001)
   

water

Barnes CE et al., Phosphonic acid containing sol-gel sorbents for Sr(II) and uranyl: Imprinting effects.
Abstracts of Papers of the American Chemical Society, 221, (INOR), 585-585, (2001)
   

water

Chen WY et al., Molecular recognition in imprinted polymers: thermodynamic investigation of analyte binding using microcalorimetry.
Journal of Chromatography A, 923, (1-2), 1-6, (2001)
   

water

Dickert FL et al., Sensors based on fingerprints of neutral and ionic analytes in polymeric materials.
Sensors and Actuators B: Chemical, 76, (1-3), 295-298, (2001)
   

water

Dickert FL et al., Double molecular imprinting - a new sensor concept for improving selectivity in the detection of polycyclic aromatic hydrocarbons (PAHs) in water.
Fresenius Journal of Analytical Chemistry, 371, (1), 11-15, (2001)
   

water

Dickert FL et al., Synthetic receptors as sensor coatings for molecules and living cells.
Analyst, 126, (6), 766-771, (2001)
   

water

Gutierrez-Fernandez S et al., Molecularly imprinted polyphosphazene films as recognition element in a voltammetric rifamycin SV sensor.
Electroanalysis, 13, (17), 1399-1404, (2001)
   

water

Hirayama K et al., Synthesis of polymer particles with specific lysozyme recognition sites by a molecular imprinting technique.
Journal of Applied Polymer Science, 81, (14), 3378-3387, (2001)
   

water

Jenkins AL et al., Molecularly imprinted polymers for the detection of chemical agents in water.
Abstracts of Papers of the American Chemical Society, 221, (MSE), 42-42, (2001)
   

water

Kirsch N et al., Towards the development of molecularly imprinted polymer based screen-printed sensors for metabolites of PAHs.
Analyst, 126, (11), 1936-1941, (2001)
   

water

Klibanov AM, Improving enzymes by using them in organic solvents.
Nature, 409, (6817), 241-246, (2001)
   

water

Kobayashi T et al., Molecular imprinting of caffeine and its recognition assay by quartz-crystal microbalance.
Analytica Chimica Acta, 435, (1), 141-149, (2001)
   

water

Lanza F et al., The application of molecular imprinting technology to solid phase extraction.
Chromatographia, 53, (11-12), 599-611, (2001)
   

water

Martín-Esteban A et al., Effect of template size on the selectivity of molecularly imprinted polymers for phenylurea herbicides.
Chromatographia, 53, (Supplement 1), S434-S437, (2001)
   

water

Marx S et al., Molecular imprinting in thin films of organic-inorganic hybrid sol-gel and acrylic polymers.
Chemistry of Materials, 13, (10), 3624-3630, (2001)
   

water

Masci G et al., Synthesis and LC characterization of clenbuterol molecularly imprinted polymers.
Journal of Pharmaceutical and Biomedical Analysis, 25, (2), 211-217, (2001)
   

water

Proceeding, Abe M et al, Novel nylon imprinted assembly for amino acids recognition, 
In: Polymer Preprints, Japan, 
1671, (2002)
   

water

Alvarez-Lorenzo C et al., Soft contact lenses capable of sustained delivery of timolol.
Journal of Pharmaceutical Sciences, 91, (10), 2182-2192, (2002)
   

water

Araki K et al., Enantioselective polymer prepared by surface imprinting technique using a bifunctional molecule.
Analytica Chimica Acta, 469, (2), 173-181, (2002)
   

water

Byrne ME et al., Networks for recognition of biomolecules: Molecular imprinting and micropatterning poly(ethylene glycol)-containing films.
Polymers for Advanced Technologies, 13, (10-12), 798-816, (2002)
   

water

Dong XC et al., Separation of ephedrine stereoisomers by molecularly imprinted polymers - influence of synthetic conditions and mobile phase compositions on the chromatographic performance.
Analyst, 127, (11), 1427-1432, (2002)
   

water

Fujiwara M et al., A sol-gel method using tetraethoxysilane and acetic anhydride: Immobilization of cubic [mu]-oxo Si-Ti complex in a silica matrix.
Chemistry of Materials, 14, (12), 4975-4981, (2002)
   

water

Hishiya T et al., Molecular imprinting of cyclodextrins leading to synthetic antibodies.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 44, (1-4), 365-367, (2002)
   

water

Proceeding, Hishiya T et al, Imprinted cyclodextrin polymers on silica surface for the preparation of HPLC stationary phases, 
In: Polymer Preprints, Japan, 
330, (2002)
   

water

Proceeding, Hishiya T et al, Preparation of cyclodextrin assembly by using host-guest complexation for molecular recognition, 
In: Polymer Preprints, Japan, 
1668, (2002)
   

water

Kobayashi T et al., Phase inversion molecular imprinting by using template copolymers for high substrate recognition.
Langmuir, 18, (7), 2866-2872, (2002)
   

water

Kobayashi T et al., Molecularly imprinted polysulfone membranes having acceptor sites for donor dibenzofuran as novel membrane adsorbents: Charge transfer interaction as recognition origin.
Chemistry of Materials, 14, (6), 2499-2505, (2002)
   

water

Proceeding, Kondo F et al, Molecular design of hydrogel catalyst for hydrolysis -Attempt to molecular imprinting in water-, 
In: Polymer Preprints, Japan, 
1429, (2002)
   

water

Proceeding, Osawa T et al, Enantioselective recognition of amino acid derivatives by molecularly imprinted cyclodextrin polymer, 
In: Polymer Preprints, Japan, 
624, (2002)
   

water

Pap T et al., Effect of solvents on the selectivity of terbutylazine imprinted polymer sorbents used in solid-phase extraction.
Journal of Chromatography A, 973, (1-2), 1-12, (2002)
   

water

Park JK et al., Characteristics of phenylalanine imprinted membrane prepared by the wet phase inversion method.
Korean Journal of Chemical Engineering, 19, (6), 940-948, (2002)
   

water

Reddy PS et al., Recognition characteristics of dibenzofuran by molecularly imprinted polymers made of common polymers.
European Polymer Journal, 38, (4), 779-785, (2002)
   

water

Schweitz L et al., Molecularly imprinted CEC sorbents: investigations into polymer preparation and electrolyte composition.
Analyst, 127, (1), 22-28, (2002)
   

water

Sreenivasan K, Molecularly imprinted polymer as storage medium for an analyte.
Bioseparation, 10, (6), 395-398, (2002)
   

water

Ulbricht M et al., Novel molecularly imprinted polymer (MIP) composite membranes via controlled surface and pore functionalizations.
Desalination, 149, (1-3), 293-295, (2002)
   

water

Proceeding, Yang DH et al, Molecular imprinting of cholesterols onto ultrathin films TiO2-gel containing b-cyclodextrin, 
In: Polymer Preprints, Japan, 
1564, (2002)
   

water

Yilmaz E, Combining the bioimprinting technique with lipase immobilization for interesterification.
World Journal Of Microbiology & Biotechnology, 18, (7), 621-625, (2002)
   

water

Yilmaz E, Improving the application of microbial lipase by bio-imprinting at substrate-interfaces.
World Journal Of Microbiology & Biotechnology, 18, (1), 37-40, (2002)
   

water

Zhu QZ et al., Selective trace analysis of sulfonylurea herbicides in water and soil samples based on solid-phase extraction using a molecularly imprinted polymer.
Environmental Science & Technology, 36, (24), 5411-5420, (2002)
   

water

Das K et al., Selective picomolar detection of hexachlorobenzene in water using a quartz crystal microbalance coated with a molecularly imprinted polymer thin film.
Langmuir, 19, (9), 3921-3925, (2003)
   

water

Fujiwara I et al., Preparation of ferrocyanide-imprinted pyridine-carrying microspheres by surface imprinting polymerization.
Analytical Sciences, 19, (4), 617-620, (2003)
   

water

Güney O, Multiple-point adsorption of terbium ions by lead ion templated thermosensitive gel: elucidating recognition of conformation in gel by terbium probe.
Journal of Molecular Recognition, 16, (2), 67-71, (2003)
   

water

Hilal N et al., Surface modified microfiltration membranes with molecularly recognising properties.
Journal of Membrane Science, 213, (1-2), 97-113, (2003)
   

water

Book chapter, Kobayashi Tet al., Molecularly imprinted membranes having amphiphilic scaffold media for target molecule recognition, 
In: Membranes-Preparation, Properties and Applications, Burganos VN, Noble RD, Asaeda M, Ayral A, Le Roux JD (Eds.) 
Materials Research Society: Warrendale, 39-43, (2003)    

water

Kostrewa S et al., Surface-enhanced Raman scattering on molecularly imprinted polymers in water.
Macromolecular Chemistry And Physics, 204, (3), 481-487, (2003)
   

water

Kraft M et al., New frontiers for mid-infrared sensors: Towards deep sea monitoring with a submarine FT-IR sensor system.
Applied Spectroscopy, 57, (6), 591-599, (2003)
   

water

Kubo T et al., On-column concentration of bisphenol A with one-step removal of humic acids in water.
Journal of Chromatography A, 987, (1-2), 389-394, (2003)
   

water

Luo GM et al., Towards more efficient glutathione peroxidase mimics: Substrate recognition and catalytic group assembly.
Current Medicinal Chemistry, 10, (13), 1151-1183, (2003)
   

water

Mertz E et al., Kinetics and thermodynamics of amine and diamine signaling by a trifluoroacetyl azobenzene reporter group.
Organic Letters, 5, (17), 3127-3130, (2003)
   

water

Mitchell-Koch JT et al., Immobilization of a europium salen complex within porous organic hosts: Modulation of luminescence properties in different chemical environments.
Chemistry of Materials, 15, (18), 3490-3495, (2003)
   

water

Molochnikov LS et al., Coordination of Cu(II) and Ni(II) in polymers imprinted so as to optimize amine chelate formation.
Polymer, 44, (17), 4805-4815, (2003)
   

water

Prasad BB et al., Imprinted polymer - Modified hanging mercury drop electrode for differential pulse adsorptive stripping voltammetric analysis of a diquat herbicide.
Electroanalysis, 15, (2), 108-114, (2003)
   

water

Ramamoorthy M et al., Molecular imprinting of cellulose acetate-sulfonated polysulfone blend membranes for Rhodamine B by phase inversion technique.
Journal of Membrane Science, 217, (1-2), 207-214, (2003)
   

water

Sanbe H et al., Uniformly sized molecularly imprinted polymers for bisphenol A and b-estradiol: retention and molecular recognition properties in hydro-organic mobile phases.
Journal of Pharmaceutical and Biomedical Analysis, 30, (6), 1835-1844, (2003)
   

water

Sanbe H et al., Preparation of uniformly sized molecularly imprinted polymers for phenolic compounds and their application to the assay of bisphenol A in river water.
Analytical Sciences, 19, (5), 715-719, (2003)
   

water

Smith RM, Before the injection - modern methods of sample preparation for separation techniques.
Journal of Chromatography A, 1000, (1-2), 3-27, (2003)
   

water

Striegler S et al., Evaluation of new strategies to prepare templated polymers with sufficient oligosaccharide recognition capacity.
Analytica Chimica Acta, 484, (1), 53-62, (2003)
   

water

Striegler S, Selective carbohydrate recognition by synthetic receptors in aqueous solution.
Current Organic Chemistry, 7, (1), 81-102, (2003)
   

water

van Hout MWJ et al., Ion suppression in the determination of clenbuterol in urine by solid-phase extraction atmospheric pressure chemical ionisation ion-trap mass spectrometry.
Rapid Communications In Mass Spectrometry, 17, (3), 245-250, (2003)
   

water

Yilmaz E, Orlistat-induced molecular bio-imprinting of microbial lipase.
World Journal Of Microbiology & Biotechnology, 19, (2), 161-165, (2003)
   

water

Asanuma H et al., Efficient separation of hydrophobic molecules by molecularly imprinted cyclodextrin polymers.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 50, (1-2), 51-55, (2004)
   

water

Baggiani C et al., Multivariate analysis of the selectivity for a pentachlorophenol-imprinted polymer.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 31-41, (2004)
   

water

Caro E et al., Molecularly imprinted solid-phase extraction of naphthalene sulfonates from water.
Journal of Chromatography A, 1047, (2), 175-180, (2004)
   

water

Carter SR et al., Surface molecularly imprinted polymer core-shell particles.
Advanced Functional Materials, 14, (6), 553-561, (2004)
   

water

Cserhati T et al., Chromatographic determination of herbicide residues in various matrices.
Biomedical Chromatography, 18, (6), 350-359, (2004)
   

water

Dickert FL et al., Synthetic receptors for chemical sensors - subnano- and micrometre patterning by imprinting techniques.
Biosensors and Bioelectronics, 20, (6), 1040-1044, (2004)
   

water

Dickert FL et al., Modifying polymers by self-organisation for the mass-sensitive detection of environmental and biogeneous analytes.
Sensors and Actuators B: Chemical, 100, (1-2), 112-116, (2004)
   

water

Dickert FL et al., QCM array for on-line-monitoring of composting procedures.
Analyst, 129, (5), 432-437, (2004)
   

water

Ebarvia BS et al., Biomimetic piezoelectric quartz sensor for caffeine based on a molecularly imprinted polymer.
Analytical and Bioanalytical Chemistry, 378, (5), 1331-1337, (2004)
   

water

Feng LA et al., Molecularly imprinted TiO2 thin film by liquid phase deposition for the determination of L-glutamic acid.
Langmuir, 20, (5), 1786-1790, (2004)
   

water

Gorbatchuk VV et al., Biomimetic cooperative interactions of dried cross-linked poly(N-6-aminohexylacrylamide) with binary mixtures of solvent vapors.
Biomacromolecules, 5, (4), 1615-1623, (2004)
   

water

Haginaka J, Molecularly imprinted polymers for solid-phase extraction.
Analytical and Bioanalytical Chemistry, 379, (3), 332-334, (2004)
   

water

Hiratani H et al., The nature of backbone monomers determines the performance of imprinted soft contact lenses as timolol drug delivery systems.
Biomaterials, 25, (6), 1105-1113, (2004)
   

water

Karlsson JG et al., The roles of template complexation and ligand binding conditions on recognition in bupivacaine molecularly imprinted polymers.
Analyst, 129, (5), 456-462, (2004)
   

water

Book chapter, Komiyama Met al., Recent Challenges and Progress, 
In: Molecular Imprinting, Komiyama M, Takeuchi T, Mukawa T, Asanuma H (Eds.) 
Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, 119-139, (2004)    

water

Book chapter, Komiyama Met al., Conclusions and Prospects, 
In: Molecular Imprinting, Komiyama M, Takeuchi T, Mukawa T, Asanuma H (Eds.) 
Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, 141, (2004)    

water

Kubo T et al., Interval immobilization technique for recognition toward a highly hydrophilic cyanobacterium toxin.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 806, (2), 229-235, (2004)
   

water

Kubo T et al., Target-selective ion-exchange media for highly hydrophilic compounds: a possible solution by use of the "interval immobilization technique".
Analytical and Bioanalytical Chemistry, 378, (1), 84-88, (2004)
   

water

Kubo T et al., Recognition of hepatotoxic homologues of Microcystin using a combination of selective adsorption media.
Journal of Separation Science, 27, (4), 316-324, (2004)
   

water

Kubo T et al., Polymer-based adsorption medium prepared using a fragment imprinting technique for homologues of chlorinated bisphenol A produced in the environment.
Journal of Chromatography A, 1029, (1-2), 37-41, (2004)
   

water

Lai JP et al., Benzo[a]pyrene imprinted polymers: synthesis, characterization and SPE application in water and coffee samples.
Analytica Chimica Acta, 522, (2), 137-144, (2004)
   

water

Lai JP et al., Separation and determination of astaxanthin from microalgal and yeast samples by molecularly imprinted microspheres.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 25-30, (2004)
   

water

Liu YW et al., Solid-phase extraction and preconcentration of cadmium(II) in aqueous solution with Cd(II)-imprinted resin (poly-Cd(II)-DAAB-VP) packed columns.
Analytica Chimica Acta, 519, (2), 173-179, (2004)
   

water

Malaisamy R et al., Evaluation of molecularly imprinted polymer blend filtration membranes under solid phase extraction conditions.
Separation and Purification Technology, 39, (3), 211-219, (2004)
   

water

Möller K et al., Investigation of matrix effects of urine on a molecularly imprinted solid-phase extraction.
Journal of Chromatography B, 811, (2), 171-176, (2004)
   

water

Navarro-Villoslada F et al., Application of multivariate analysis to the screening of molecularly imprinted polymers for bisphenol A.
Analytica Chimica Acta, 504, (1), 149-162, (2004)
   

water

Piletska E et al., Biotin-specific synthetic receptors prepared using molecular imprinting.
Analytica Chimica Acta, 504, (1), 179-183, (2004)
   

water

Pogorelova SP et al., Development of ion-sensitive field-effect transistor-based sensors for benzylphosphonic acids and thiophenols using molecularly imprinted TiO2 films.
Analytica Chimica Acta, 504, (1), 113-122, (2004)
   

water

Raitman OA et al., Analysis of NAD(P)+ and NAD(P)H cofactors by means of imprinted polymers associated with Au surfaces: A surface plasmon resonance study.
Analytica Chimica Acta, 504, (1), 101-111, (2004)
   

water

Rao TP et al., Tailored materials for preconcentration or separation of metals by ion-imprinted polymers for solid-phase extraction (IIP-SPE).
TrAC Trends in Analytical Chemistry, 23, (1), 28-35, (2004)
   

water

San Vicente B et al., Continuous solid-phase extraction and preconcentration of bisphenol A in aqueous samples using molecularly imprinted columns.
Analytical and Bioanalytical Chemistry, 380, (1), 115-122, (2004)
   

water

Say R et al., Selective separation and preconcentration of cyanide by a column packed with cyanide-imprinted polymeric microbeads.
Separation and Purification Technology, 40, (1), 9-14, (2004)
   

water

Silvestri D et al., Molecularly imprinted bioartificial membranes for the selective recognition of biological molecules.
Journal of Biomaterials Science-Polymer Edition, 15, (3), 255-278, (2004)
   

water

Sreenivasan K, Imparting affinity sites for adenosine triphosphate on the surface of polyurethane through molecular imprinting.
Journal of Applied Polymer Science, 94, (5), 2088-2090, (2004)
   

water

Suedee R et al., Use of molecularly imprinted polymers from a mixture of tetracycline and its degradation products to produce affinity membranes for the removal of tetracycline from water.
Journal of Chromatography B, 811, (2), 191-200, (2004)
   

water

Wang D et al., Solid extraction of caffeine and theophylline from green tea by molecular imprinted polymers.
Korean Journal of Chemical Engineering, 21, (4), 853-857, (2004)
   

water

Watabe Y et al., Improved detectability with a polymer-based trapping device in rapid HPLC analysis for ultra-low levels of bisphenol A (BPA) in environmental samples.
Analytical Sciences, 20, (1), 133-137, (2004)
   

water

Watabe Y et al., Determination of bisphenol A in environmental water at ultra-low level by high-performance liquid chromatography with an effective on-line pretreatment device.
Journal of Chromatography A, 1032, (1-2), 45-49, (2004)
   

water

Zheng N et al., Sulfamethoxazole-imprinted polymer for selective determination of sulfamethoxazole in tablets.
Journal of Chromatography A, 1033, (1), 179-182, (2004)
   

water

Zhou SN et al., Analysis of wheat extracts for ochratoxin A by molecularly imprinted solid-phase extraction and pulsed elution.
Analytical and Bioanalytical Chemistry, 378, (8), 1903-1906, (2004)
   

water

Zwiener C et al., LC-MS analysis in the aquatic environment and in water treatment - a critical review - Part I: Instrumentation and general aspects of analysis and detection.
Analytical and Bioanalytical Chemistry, 378, (4), 851-861, (2004)
   

water

Liu YW et al., Highly selective determination of inorganic mercury(II) after preconcentration with Hg(II)-imprinted diazoaminobenzene-vinylpyridine copolymers.
Analytica Chimica Acta, 538, (1-2), 85-91, (2005)
   

water

Rodriguez-Mozaz S et al., Advantages and limitations of on-line solid phase extraction coupled to liquid chromatography-mass spectrometry technologies versus biosensors for monitoring of emerging contaminants in water.
Journal of Chromatography A, 1152, (1-2), 97-115, (2007)
   

water

Li Y et al., Selective removal of 2,4-dichlorophenol from contaminated water using non-covalent imprinted microspheres.
Environmental Pollution, 157, (6), 1879-1885, (2009)
   

water

Proceeding, Liu J et al, Removal of chlorpyrifos from contaminated water using molecularly imprinted polymeric microspheres, 

Art. No. 5514935, (2010)
   

water

Tajodini N et al., Preconcentration and Determination of Ultra Trace Cobalt(II) in Water Samples Using Co(II)-Imprinted Diazoaminobenzene-Vinylpyridine Copolymers.
Asian Journal of Chemistry, 22, (5), 3335-3344, (2010)
   

water

Shen ZL et al., Selective Solid-Phase Extraction Using Molecularly Imprinted Polymer for Analysis of Methamidophos in Water and Soil Samples.
Bioscience Biotechnology and Biochemistry, 75, (3), 473-479, (2011)
   

water

Proceeding, Zhang KC et al, Removal of Rotenone from Contaminated Water Using Molecularly Imprinted Polymeric Microspheres, 
In: Applied Mechanics and Materials, Sun DY, Sung WP, Chen R (Eds.), 
1425-1428, (2011)
   

water

Liu J et al., Preparation of parathion imprinted polymer and its application for the determination of parathion in water.
Chinese Journal of Analysis Laboratory, 31, (9), 81-84, (2012)
   

water

Murray A et al., Application of molecularly imprinted and non-imprinted polymers for removal of emerging contaminants in water and wastewater treatment: a review.
Environmental Science and Pollution Research, 19, (9), 3820-3830, (2012)
   

water

Pakade V et al., Molecularly imprinted polymers targeting quercetin in high-temperature aqueous solutions.
Journal of Chromatography A, 1230, (1), 15-23, (2012)
   

water

Brogat M et al., MSPE/UV for field detection of micropollutants in water.
Microchemical Journal, 108, 215-223, (2013)
   

water

Matejicek D et al., The use of molecularly imprinted polymers for the multicomponent determination of endocrine-disrupting compounds in water and sediment.
Journal of Separation Science, 36, (6), 1097-1103, (2013)
   

water

Matejicek D et al., Online molecularly imprinted solid-phase extraction coupled to liquid chromatography-tandem mass spectrometry for the determination of hormones in water and sediment samples.
Journal of Separation Science, 36, (9-10), 1509-1515, (2013)
   

water

Abrão LCC et al., Determination of Tetracyclines by Solid-Phase Extraction with a Molecularly Imprinted Polymer and High-Performance Liquid Chromatography.
Analytical Letters, 47, (13), 2183-2194, (2014)
   

water

Gryshchenko AO et al., Development of Molecularly Imprinted Polymer in Porous Film Format for Binding of Phenol and Alkylphenols from Water.
International Journal of Molecular Sciences, 15, (1), 1338-1357, (2014)
   

water

Proceeding, Lin GF et al, Construction and Application of Molecularly Imprinted Film Sensor on Determination of Chlorpyrifos in Water, 
In: Advanced Materials Research, Mei Z (Ed.), 
843-849, (2014)
   

water

Yang JW et al., Preparation of Cyproheptadine Imprinted Polymers and Its Application to Solid Phase Extraction.
Chinese Journal of Analytical Chemistry, 42, (6), 878-884, (2014)
   

water

Yze LH et al., Fabrication and Characterization of Molecularly Imprinted Polymer for Hg(II) Ion.
Asian Journal of Chemistry, 26, (16), 5029-5032, (2014)
   

water

Proceeding, Elosua C et al, Glucose optical fibre sensor based on a luminescent molecularly imprinted polymer, 

ArticleNo963429, (2015)
   

water

Manzo V et al., A molecularly imprinted polymer as the sorptive phase immobilized in a rotating disk extraction device for the determination of diclofenac and mefenamic acid in wastewater.
Analytica Chimica Acta, 889, 130-137, (2015)
   

water

Afifi R et al., SPE and HPLC monitoring of 17-β-estradiol in Egyptian aquatic ecosysetms.
Journal of Liquid Chromatography & Related Technologies, 39, (8), 428-434, (2016)
   

water

Cetó X et al., Electrochemical detection of N-nitrosodimethylamine using a molecular imprinted polymer.
Sensors and Actuators B: Chemical, 237, 613-620, (2016)
   

water

Sui DP et al., Ion-imprinted silica adsorbent modified diffusive gradients in thin films technique: Tool for speciation analysis of free lead species.
Talanta, 148, 285-291, (2016)
   

water

Tang YW et al., Determination of clenbuterol in pork and potable water samples by molecularly imprinted polymer through the use of covalent imprinting method.
Food Chemistry, 190, 952-959, (2016)
   

water

Ashrafzadeh-Afshar E et al., Nanosized ion-imprinted polymer doped with Alizarin Red S for separation and quantification of zinc(II) prior to its determination by electrothermal AAS.
Microchimica Acta, 184, (8), 2975-2980, (2017)
   

water

Barciela-Alonso MC et al., Solid phase extraction using molecular imprinted polymers for phthalate determination in water and wine samples by HPLC-ESI-MS.
Microchemical Journal, 132, 233-237, (2017)
   

water

Berho C et al., Laboratory calibration of a POCIS-like sampler based on molecularly imprinted polymers for glyphosate and AMPA sampling in water.
Analytical and Bioanalytical Chemistry, 409, (8), 2029-2035, (2017)
   

water

Casado N et al., Current development and applications of ordered mesoporous silicas and other sol-gel silica-based materials in food sample preparation for xenobiotics analysis.
TrAC Trends in Analytical Chemistry, 88, 167-184, (2017)
   

water

Li L et al., Biomimetic ELISA detection of malachite green based on molecularly imprinted polymer film.
Food Chemistry, 229, 403-408, (2017)
   

water

Wu L et al., Rapid determination of malachite green in water and fish using a fluorescent probe based on CdTe quantum dots coated with molecularly imprinted polymer.
Sensors and Actuators B: Chemical, 239, 69-75, (2017)
   

water

Akkbik M et al., Novel Molecularly Imprinted Polymer for the Determination of Carbendazim From Water and Food by Solid-Phase Extraction and High-Performance Liquid Chromatography.
Analytical Letters, 51, (1-2), 7-23, (2018)
   

water

Li YN et al., Molecularly imprinted polymer based diffusive gradients in thin-films for in situ selective sampling and determination of ciprofloxacin.
Journal of Separation Science, 41, (20), 3946-3952, (2018)
   

water

Madikizela LM et al., Application of molecularly imprinted polymer designed for the selective extraction of ketoprofen from wastewater.
Water SA, 44, (3), 406-418, (2018)
   

water

So J et al., Adsorption of 1-naphthyl methyl carbamate in water by utilizing a surface molecularly imprinted polymer.
Chemical Physics Letters, 699, 199-207, (2018)
   

water

Song XQ et al., Determination of Ten Macrolide Drugs in Environmental Water Using Molecularly Imprinted Solid-Phase Extraction Coupled with Liquid Chromatography-Tandem Mass Spectrometry.
Molecules, 23, (5), ArticleNo1172-(2018)
   

water

Teixeira RA et al., Pipette-tip solid-phase extraction using poly(1-vinylimidazole-co-trimethylolpropane trimethacrylate) as a new molecularly imprinted polymer in the determination of avermectins and milbemycins in fruit juice and water samples.
Food Chemistry, 262, 86-93, (2018)
   

water

Che Lah NF et al., The role of porogen-polymer complexation in atrazine imprinted polymer to work as an electrochemical sensor in water.
Journal of Environmental Chemical Engineering, 7, (6), Article103500-(2019)
   

water

Mirzajani R et al., Fabrication of UMCM-1 based monolithic and hollow fiber - Metal-organic framework deep eutectic solvents/molecularly imprinted polymers and their use in solid phase microextraction of phthalate esters in yogurt, water and edible oil by GC-FID.
Food Chemistry, 314, Article126179-(2020)
   

water

Zhu GF et al., One-step polymerization of hydrophilic ionic liquid imprinted polymer in water for selective separation and detection of levofloxacin from environmental matrices.
Journal of Separation Science, 43, (3), 639-647, (2020)
   

water

Casarin F et al., Optimized Synthesis of Molecularly Imprinted Hybrid Polymer by Factorial Design for Selective Caffeine Extraction in Surface Water.
Journal of the Brazilian Chemical Society, 32, (9), 1789-1801, (2021)
   

water

Rebelo P et al., Development of a molecular imprinted electrochemiluminescence sensor for amitriptyline detection: From MD simulations to experimental implementation.
Electrochimica Acta, 397, Article139273-(2021)
   

water analysis

Masqué N et al., New polymeric and other types of sorbents for solid-phase extraction of polar organic micropollutants from environmental water.
TrAC Trends in Analytical Chemistry, 17, (6), 384-394, (1998)
   

water analysis

Hogendoorn E et al., Recent and future developments of liquid chromatography in pesticide trace analysis.
Journal of Chromatography A, 892, (1-2), 435-453, (2000)
   

water analysis

Sabik H et al., Multiresidue methods using solid-phase extraction techniques for monitoring priority pesticides, including triazines and degradation products, in ground and surface waters.
Journal of Chromatography A, 885, (1-2), 217-236, (2000)
   

water analysis

Baggiani C et al., Molecularly imprinted solid-phase extraction sorbent for the clean-up of chlorinated phenoxyacids from aqueous samples.
Journal of Chromatography A, 938, (1-2), 35-44, (2001)
   

water analysis

Caro E et al., Non-covalent and semi-covalent molecularly imprinted polymers for selective on-line solid-phase extraction of 4-nitrophenol from water samples.
Journal of Chromatography A, 963, (1-2), 169-178, (2002)
   

water analysis

Pap T et al., Effect of solvents on the selectivity of terbutylazine imprinted polymer sorbents used in solid-phase extraction.
Journal of Chromatography A, 973, (1-2), 1-12, (2002)
   

water analysis

Caro E et al., On-line solid-phase extraction with molecularly imprinted polymers to selectively extract substituted 4-chlorophenols and 4-nitrophenol from water.
Journal of Chromatography A, 995, (1-2), 233-238, (2003)
   

water analysis

Chapuis F et al., Optimization of the class-selective extraction of triazines from aqueous samples using a molecularly imprinted polymer by a comprehensive approach of the retention mechanism.
Journal of Chromatography A, 999, (1-2), 23-33, (2003)
   

water analysis

Kubo T et al., On-column concentration of bisphenol A with one-step removal of humic acids in water.
Journal of Chromatography A, 987, (1-2), 389-394, (2003)
   

water analysis

San Vicente B et al., Continuous solid-phase extraction and preconcentration of bisphenol A in aqueous samples using molecularly imprinted columns.
Analytical and Bioanalytical Chemistry, 380, (1), 115-122, (2004)
   

water analysis

Watabe Y et al., Determination of bisphenol A in environmental water at ultra-low level by high-performance liquid chromatography with an effective on-line pretreatment device.
Journal of Chromatography A, 1032, (1-2), 45-49, (2004)
   

water analysis

Watabe Y et al., LC/MS determination of bisphenol A in river water using a surface-modified molecularly-imprinted polymer as an on-line pretreatment device.
Analytical and Bioanalytical Chemistry, 381, (6), 1193-1198, (2005)
   

water analysis

Watabe Y et al., Fully automated liquid chromatography-mass spectrometry determination of 17β-estradiol in river water.
Journal of Chromatography A, 1120, (1-2), 252-259, (2006)
   

water analysis

Lavine BK et al., Swellable molecularly imprinted polyN-(N-propyl)acrylamide particles for detection of emerging organic contaminants using surface plasmon resonance spectroscopy.
Talanta, 72, (3), 1042-1048, (2007)
   

water analysis

Alvarez-Diaz A et al., Halogenated molecularly imprinted polymers for selective determination of carbaryl by phosphorescence measurements.
Analytical and Bioanalytical Chemistry, 394, (6), 1569-1576, (2009)
   

water analysis

Khajeh M et al., Separation of zinc from aqueous samples using a molecular imprinting technique.
International Journal of Environmental Analytical Chemistry, 89, (13), 981-992, (2009)
   

water analysis

Valero-Navarro A et al., The development of a MIP-optosensor for the detection of monoamine naphthalenes in drinking water.
Biosensors and Bioelectronics, 24, (7), 2305-2311, (2009)
   

water analysis

Baggiani C et al., Molecularly imprinted polymer/cryogel composites for solid-phase extraction of bisphenol A from river water and wine.
Analytical and Bioanalytical Chemistry, 397, (2), 815-822, (2010)
   

water analysis

Canale F et al., Development of a molecularly imprinted polymer for selective extraction of bisphenol A in water samples.
Journal of Separation Science, 33, (11), 1644-1651, (2010)
   

water analysis

Khajeh M et al., Imprinted polymer particles for preconcentration of copper from water and biological samples.
Environmental Chemistry Letters, 9, (2), 177-183, (2011)
   

water analysis

Lai EPC et al., Optimization of Molecularly Imprinted Polymer Method for Rapid Screening of 17β-Estradiol in Water by Fluorescence Quenching.
International Journal of Analytical Chemistry, 2011, Article ID 214747-(2011)
   

water analysis

Sainz-Gonzalo FJ et al., The development of a screening molecularly imprinted polymer optosensor for detecting xylenes in water samples.
Microchemical Journal, 99, (2), 278-282, (2011)
   

water analysis

Sainz-Gonzalo FJ et al., Synthesis and characterization of a molecularly imprinted polymer optosensor for TEXs-screening in drinking water.
Biosensors and Bioelectronics, 26, (7), 3331-3338, (2011)
   

water analysis

Valero-Navarro A et al., Synthesis of a novel polyurethane-based-magnetic imprinted polymer for the selective optical detection of 1-naphthylamine in drinking water.
Biosensors and Bioelectronics, 26, (11), 4520-4525, (2011)
   

water analysis

Lopez-Nogueroles M et al., Development of a selective solid phase extraction method for nitro musk compounds in environmental waters using a molecularly imprinted sorbent.
Talanta, 110, 128-134, (2013)
   

water analysis

Lucci P et al., On-line solid-phase extraction for liquid chromatography-mass spectrometry analysis of pesticides.
Journal of Separation Science, 37, (20), 2929-2939, (2014)
   

water analysis

Poliwoda A et al., Application of Molecular Imprinted Polymers for Selective Solid Phase Extraction of Bisphenol A.
Ecological Chemistry and Engineering S, 23, (4), 651-664, (2016)
   

water analysis

Graniczkowska K et al., Capacitive sensing of N-formylamphetamine based on immobilized molecular imprinted polymers.
Biosensors and Bioelectronics, 92, 741-747, (2017)
   

water analysis

Wang TT et al., Analysis of melamine and analogs in complex matrices: Advances and trends.
Journal of Separation Science, 40, (1), 170-182, (2017)
   

water analysis

Beloglazova NV et al., Capacitive sensor for detection of benzo(a)pyrene in water.
Talanta, 190, 219-225, (2018)
   

water analysis

Topcu C et al., Electrochemical Determination of Copper(II) in Water Samples Using a Novel Ion-Selective Electrode Based on a Graphite Oxide-Imprinted Polymer Composite.
Analytical Letters, 51, (12), 1890-1910, (2018)
   

water analysis

Zarejousheghani M et al., Negative electrospray ionization ion mobility spectrometry combined with paper-based molecular imprinted polymer disks: A novel approach for rapid target screening of trace organic compounds in water samples.
Talanta, 190, 47-54, (2018)
   

water analysis

Kalogiouri NP et al., Synthesis and application of molecularly imprinted polymers using sol-gel matrix imprinting technology for the efficient solid-phase extraction of BPA from water.
Microchemical Journal, 157, Article104965-(2020)
   

Water and food samples

Ashkenani H et al., Determination of cadmium(II) using carbon paste electrode modified with a Cd-ion imprinted polymer.
Microchimica Acta, 178, (1), 53-60, (2012)
   

Water and milk

Zhuang Y et al., Determination of Tetracyclines in Water and Milk by Solid-phase Microextraction Based on Tetracylines Molecularly Imprinted Polymers Coupled with HPLC.
Journal of Analytical Science, 30, (4), 451-456, (2014)
   

Water and milk

Xie XY et al., Development and characterization of magnetic molecularly imprinted polymers for the selective enrichment of endocrine disrupting chemicals in water and milk samples.
Analytical and Bioanalytical Chemistry, 407, (6), 1735-1744, (2015)
   

Water and soil samples

Zhu XL et al., Selective solid-phase extraction using molecularly imprinted polymer for the analysis of polar organophosphorus pesticides in water and soil samples.
Journal of Chromatography A, 1092, (2), 161-169, (2005)
   

Water-assisted method

Lu Y et al., Water-assisted formation of novel molecularly imprinted polymer membranes with ordered porous structure.
Polymer, 48, (21), 6205-6209, (2007)
   

waterborne bacteria

Saylan Y et al., Detecting Fingerprints of Waterborne Bacteria on a Sensor.
Chemosensors, 7, (3), ArticleNo33-(2019)
   

Waterborne diseases

Altintas Z et al., Biosensors for waterborne viruses: Detection and removal.
Biochimie, 115, 144-154, (2015)
   

water compatibility

Puoci F et al., Molecularly imprinted polymers in drug delivery: state of art and future perspectives.
Expert Opinion on Drug Delivery, 8, (10), 1379-1393, (2011)
   

water compatibility

Horemans F et al., Towards water compatible MIPs for sensing in aqueous media.
Journal of Molecular Recognition, 25, (6), 344-351, (2012)
   

water compatibility

Hao Y et al., Water-compatible magnetic imprinted nanoparticles served as solid-phase extraction sorbents for selective determination of trace 17β-estradiol in environmental water samples by liquid chromatography.
Journal of Chromatography A, 1396, 7-16, (2015)
   

water compatibility

Fan WY et al., Water-compatible graphene oxide/molecularly imprinted polymer coated stir bar sorptive extraction of propranolol from urine samples followed by high performance liquid chromatography-ultraviolet detection.
Journal of Chromatography A, 1443, 1-9, (2016)
   

water-compatibility

Singh AK et al., Designing L-serine targeted molecularly imprinted polymer via theoretical investigation.
Journal of Theoretical and Computational Chemistry, 15, (5), ArticleNo1650041-(2016)
   

water compatibility

Wang XH et al., Green synthesis of water-compatible and thermo-responsive molecularly imprinted nanoparticles.
European Polymer Journal, 92, 174-184, (2017)
   

water compatibility

Ji WH et al., A water-compatible magnetic molecularly imprinted polymer for the selective extraction of risperidone and 9-hydroxyrisperidone from human urine.
Talanta, 181, 392-400, (2018)
   

water compatibility

Yu X et al., Computational design of a molecularly imprinted polymer compatible with an aqueous environment for solid phase extraction of chenodeoxycholic acid.
Journal of Chromatography A, 1609, Article460490-(2020)
   

Water-compatible

Pan GQ et al., An efficient approach to obtaining water-compatible and stimuli-responsive molecularly imprinted polymers by the facile surface-grafting of functional polymer brushes via RAFT polymerization.
Biosensors and Bioelectronics, 26, (3), 976-982, (2010)
   

Water-compatible

Zheng MM et al., Selective sample pretreatment by molecularly imprinted polymer monolith for the analysis of fluoroquinolones from milk samples.
Journal of Chromatography A, 1217, (14), 2075-2081, (2010)
   

water compatible

Pan GQ et al., Efficient One-Pot Synthesis of Water-Compatible Molecularly Imprinted Polymer Microspheres by Facile RAFT Precipitation Polymerization.
Angewandte Chemie International Edition, 50, (49), 11731-11734, (2011)
   

Water-compatible

Ma Y et al., Narrowly Dispersed Molecularly Imprinted Polymer Microspheres with Photo- and Thermo-Responsive Template Binding Properties in Pure Aqueous Media by RAFT Polymerization.
Molecular Imprinting, 1, (1), 3-16, (2012)
   

water compatible

Li B et al., Water-compatible silica sol-gel molecularly imprinted polymer as a potential delivery system for the controlled release of salicylic acid.
Journal of Molecular Recognition, 27, (9), 559-565, (2014)
   

Water-compatible

Ma Y et al., Efficient one-pot synthesis of water-compatible and photoresponsive molecularly imprinted polymer nanoparticles by facile RAFT precipitation polymerization.
Journal of Polymer Science Part A: Polymer Chemistry, 52, (14), 1941-1952, (2014)
   

Water-compatible

Ning FJ et al., Preparation and Characterization of Superparamagnetic Molecularly Imprinted Polymers for Selective Adsorption and Separation of Vanillin in Food Samples.
Journal of Agricultural and Food Chemistry, 62, (46), 11138-11145, (2014)
   

Water-compatible

Xu SF et al., Double water compatible molecularly imprinted polymers applied as solid-phase extraction sorbent for selective preconcentration and determination of triazines in complicated water samples.
Journal of Chromatography A, 1350, 23-29, (2014)
   

Water-compatible

Zhang HQ, Water-compatible molecularly imprinted polymers: Promising synthetic substitutes for biological receptors.
Polymer, 55, (3), 699-714, (2014)
   

Water-compatible

Zhang QW et al., Surface plasmon resonance sensor for femtomolar detection of testosterone with water-compatible macroporous molecularly imprinted film.
Analytical Biochemistry, 463, 7-14, (2014)
   

Water-compatible

Li CX et al., Hydrophilic Hollow Molecularly Imprinted Polymer Microparticles with Photo- and Thermoresponsive Template Binding and Release Properties in Aqueous Media.
ACS Applied Materials & Interfaces, 7, (49), 27340-27350, (2015)
   

Water-compatible

Book chapter, Wan YCet al., MIPs in Aqueous Environments, 
In: Molecularly Imprinted Polymers in Biotechnology, Mattiasson B, Ye L (Eds.) 
Springer: Berlin,Heidelberg, 131-166, (2015)    

Water-compatible

Cela-Pérez MC et al., Water-compatible imprinted pills for sensitive determination of cannabinoids in urine and oral fluid.
Journal of Chromatography A, 1429, 53-64, (2016)
   

water compatible

Prasad BB et al., Development of water compatible imprinted polymer beads for piezoelectric sensing of ultra-trace 5,6-dihydrouracil in biological fluids.
Sensors and Actuators B: Chemical, 235, 94-102, (2016)
   

Water-compatible

Singh AK et al., Mesalmine Targeted Water-Compatible Molecularly Imprinted Polymer-Silver Nanoparticles with Surface-Enhanced Raman Spectroscopic (SERS) and Voltammetric Detection.
Sensor Letters, 14, (1), 76-83, (2016)
   

Water-compatible

Wu XQ et al., Water-compatible temperature and magnetic dual-responsive molecularly imprinted polymers for recognition and extraction of bisphenol A.
Journal of Chromatography A, 1435, 30-38, (2016)
   

Water-compatible

Arabi M et al., Development of a Lower Toxic Approach Based on Green Synthesis of Water-Compatible Molecularly Imprinted Nanoparticles for the Extraction of Hydrochlorothiazide from Human Urine.
ACS Sustainable Chemistry & Engineering, 5, (5), 3775-3785, (2017)
   

Water-compatible

Ostovan A et al., Fabrication of water-compatible superparamagnetic molecularly imprinted biopolymer for clean separation of baclofen from bio-fluid samples: A mild and green approach.
Talanta, 179, 760-768, (2018)
   

Water-compatible

Wang Y et al., Preparation and detection of progesterone by molecularly imprinted film based on reversible addition fragmentation chain transfer polymerization.
Chinese Science Bulletin, 63, (1), 68-77, (2018)
   

water compatible

Gholami H et al., Preparation of hollow porous molecularly imprinted and aluminum(III) doped silica nanospheres for extraction of the drugs valsartan and losartan prior to their quantitation by HPLC.
Microchimica Acta, 186, (11), Article702-(2019)
   

Water-compatible binding sites

Huang DL et al., Fabrication of water-compatible molecularly imprinted polymer based on β-cyclodextrin modified magnetic chitosan and its application for selective removal of bisphenol A from aqueous solution.
Journal of the Taiwan Institute of Chemical Engineers, 77, 113-121, (2017)
   

Water-compatible imprinted polymer

Benito-Peña E et al., Solid-phase extraction of fluoroquinolones from aqueous samples using a water-compatible stochiometrically imprinted polymer.
Journal of Chromatography A, 1208, (1-2), 62-70, (2008)
   

Water-compatible materials

Wang MY et al., Water-compatible dummy molecularly imprinted resin prepared in aqueous solution for green miniaturized solid-phase extraction of plant growth regulators.
Journal of Chromatography A, 1458, 9-17, (2016)
   

Water compatible MIP

Book chapter, Haupt Ket al., Molecularly Imprinted Polymers, 
In: Molecular Imprinting, Haupt K (Ed.) 
Springer: Berlin / Heidelberg, 1-28, (2012)    

Water compatible MIP

Dhanashree S et al., Molecularly Imprinted Polymers: Novel Discovery for Drug Delivery.
Current Drug Delivery, 13, (5), 632-645, (2016)
   

Water compatible MIP

Gomez-Caballero A et al., Water compatible stir-bar devices imprinted with underivatised glyphosate for selective sample clean-up.
Journal of Chromatography A, 1451, 23-32, (2016)
   

Water-compatible MIPs

Zhou TY et al., Recent advances and trends of molecularly imprinted polymers for specific recognition in aqueous matrix: Preparation and application in sample pretreatment.
TrAC Trends in Analytical Chemistry, 114, 11-28, (2019)
   

Water-compatible molecularly imprinted polymer

Luo XB et al., Novel molecularly imprinted polymer using 1-(α-methyl acrylate)-3-methylimidazolium bromide as functional monomer for simultaneous extraction and determination of water-soluble acid dyes in wastewater and soft drink by solid phase extraction and high performance liquid chromatography.
Journal of Chromatography A, 1218, (8), 1115-1121, (2011)
   

Water-compatible molecularly imprinted polymer

Dai XJ et al., Preparation of water-compatible magnetic imprinted nanospheres using heptakis (β-cyclodextrin-ionic liquid) as functional monomer for selective recognition of fluoroquinolones in water samples.
Microchemical Journal, 171, Article106793-(2021)
   

Water-compatible molecularly imprinted polymer (MIP)

Abrão LCC et al., Determination of Tetracyclines by Solid-Phase Extraction with a Molecularly Imprinted Polymer and High-Performance Liquid Chromatography.
Analytical Letters, 47, (13), 2183-2194, (2014)
   

Water-compatible molecularly imprinted polymers

Benito-Peña E et al., Water-compatible molecularly imprinted polymer for the selective recognition of fluoroquinolone antibiotics in biological samples.
Analytical and Bioanalytical Chemistry, 393, (1), 235-245, (2009)
   

Water-compatible molecularly imprinted polymers

Zhao XL et al., Development of water-compatible molecularly imprinted solid-phase extraction coupled with high performance liquid chromatography-tandem mass spectrometry for the detection of six sulfonamides in animal-derived foods.
Journal of Chromatography A, 1574, 9-17, (2018)
   

Water-compatible polymer

Breton F et al., Selective adenosine-5’-monophosphate uptake by water-compatible molecularly imprinted polymer.
Analytica Chimica Acta, 616, (2), 222-229, (2008)
   

water-compatible polymers

Rouhi M et al., Role of Comonomers in the Recognition of Anionic Biomolecules in Water: Hydrogen-Bonded Imprinted Polymeric Receptor.
ACS Applied Polymer Materials, 3, (10), 4904-4912, (2021)
   

Water-containing medium

Liang B et al., Study on the preparation of chloramphenicol molecular imprinted polymers by precipitation polymerizationn water-containing medium and their adsorption characteristics.
Journal of Sichuan University (Engineering Science Edition), 42, (6), 172-175, (2010)
   

Water-containing system

Qu GR et al., Metal ion mediated synthesis of molecularly imprinted polymers targeting tetracyclines in aqueous samples.
Journal of Chromatography B, 877, (27), 3187-3193, (2009)
   

Water contaminants

Okan M et al., Functional polymeric nanoparticle decorated microcantilever sensor for specific detection of erythromycin.
Sensors and Actuators B: Chemical, 256, 325-333, (2018)
   

Water contamination

Lopez-Roldan R et al., On-line bacteriological detection in water.
TrAC Trends in Analytical Chemistry, 44, 46-57, (2013)
   

Water contamination

Prachi et al., Nanotechnology in Waste Water Treatment: A Review.
International Journal of ChemTech Research, 5, (5), 2303-2308, (2013)
   

Water disinfection

Xiao G et al., Visible-light-mediated synergistic photocatalytic antimicrobial effects and mechanism of Ag-nanoparticles@chitosan-TiO2 organic-inorganic composites for water disinfection.
Applied Catalysis B: Environmental, 170-171, 255-262, (2015)
   

Water environment

Ren YM et al., Preparation of zirconium oxy ion-imprinted particle for the selective separation of trace zirconium ion from water.
Journal of Colloid and Interface Science, 431, 209-215, (2014)
   

Water environment

Ren YM et al., The selective binding character of a molecular imprinted particle for Bisphenol A from water.
Water Research, 50, 90-100, (2014)
   

Water environment

Arabzadeh N et al., Synthesis, characterization, and application of nano-molecularly imprinted polymer for fast solid-phase extraction of tartrazine from water environment.
Desalination and Water Treatment, 54, (9), 2452-2460, (2015)
   

Water-extraction of Rhodiola L.

Jiang W et al., Adsorption properties for heavy metal ions of molecular imprinting chitosan-coated diatomite beads in water-extraction liquid of Rhodiola L.
Journal of Chemical Industry and Engineering (China), 59, (5), 1179-1183, (2008)
   

water flux

Huangfu FY et al., Preparation and Properties of the Norfloxacin-Zinc (II) Molecularly Imprinted Membrane Chromatography.
Polymer Materials Science and Engineering, 29, (6), 129-132, (2013)
   

water flux

Wei MH et al., Synthesis and Characterization of Hybrid Molecularly Imprinted Membrane with Blending SiO2 Nanoparticles for Ferulic Acid.
Journal of Inorganic and Organometallic Polymers and Materials, 27, (2), 586-597, (2017)
   

water flux

Wei MH et al., Preparation and Characterization of Dual-Template Molecularly Imprinted Membrane with High Flux Based on Blending the Inorganic Nanoparticles.
Journal of Inorganic and Organometallic Polymers and Materials, 28, (1), 295-307, (2018)
   

Water media

Parisi OI et al., Surface modifications of molecularly imprinted polymers for improved template recognition in water media.
Journal of Polymer Research, 17, (3), 355-362, (2010)
   

Water media

Ji WH et al., Superhydrophilic molecularly imprinted polymers based on a water-soluble functional monomer for the recognition of gastrodin in water media.
Journal of Chromatography A, 1425, 88-96, (2015)
   

Water medium

Lian HX et al., Novel metal ion-mediated complex imprinted membrane for selective recognition and direct determination of naproxen in pharmaceuticals by solid surface fluorescence.
Talanta, 116, 460-467, (2013)
   

Water monitoring

Lopez-Roldan R et al., On-line bacteriological detection in water.
TrAC Trends in Analytical Chemistry, 44, 46-57, (2013)
   

Water monitoring

Huang K et al., Integrated ion imprinted polymers-paper composites for selective and sensitive detection of Cd(II) ions.
Journal of Hazardous Materials, 333, 137-143, (2017)
   

Water-phase recognition

Sun HW et al., Recognition mechanism of water-compatible molecularly imprinted solid-phase extraction and determination of nine quinolones in urine by high performance liquid chromatography.
Journal of Chromatography A, 1212, (1-2), 1-9, (2008)
   

Water-phase recognition

Meng L et al., Fast screening of ketamine in biological samples based on molecularly imprinted photonic hydrogels.
Analytica Chimica Acta, 771, 86-94, (2013)
   

Water-phase recognition

Meng L et al., Molecularly imprinted photonic hydrogels for fast screening of atropine in biological samples with high sensitivity.
Forensic Science International, 231, (1-3), 6-12, (2013)
   

water-phase separation

Zhang H et al., Water-Compatible Molecular Imprinting Separation Technique and Its Application in Analytical Chemistry.
Progress In Chemistry, 23, (10), 2140-2150, (2011)
   

water pollution

Proceeding, Rickerby DG et al, Biosensor networks for monitoring water pollution, 

276-282, (2011)
   

water pollution

Gour DG et al., Molecularly imprinted polymer for detection of endocrine disrupting chemical epinephrine in drinking water and biological buffers.
Indian Journal of Chemistry, 54A, (8), 1051-1056, (2015)
   

water pollution

Proceeding, Alahi MEE et al, Highly selective ion imprinted polymer based interdigital sensor for nitrite detection, 

1-5, (2016)
   

water pollution

Yang H et al., Preparation of Ion-Imprinted Amino-Functionalized Nano-Porous Silica for Selective Removal of Heavy Metal Ions from Water Environment.
Journal of Nanoscience and Nanotechnology, 17, (9), 6818-6826, (2017)
   

water pollution

Hijazi HY et al., Analysis of thiophenes in seawater: Molecularly imprinted polymer thin-film extraction with desorption electrospray ionization mass spectrometry.
International Journal of Mass Spectrometry, 443, 9-15, (2019)
   

Water purification

Altintas Z et al., Development of functionalized nanostructured polymeric membranes for water purification.
Chemical Engineering Journal, 300, 358-366, (2016)
   

Water purification

Gkementzoglou C et al., Development of a sandwich-type filtration unit packed with MIP nanoparticles for removal of atrazine from water sources.
Chemical Engineering Journal, 287, 233-240, (2016)
   

Water purification

Roy E et al., A single solution for arsenite and arsenate removal from drinking water using cysteine@ZnS:TiO2 nanoparticle modified molecularly imprinted biofouling-resistant filtration membrane.
Chemical Engineering Journal, 304, 259-270, (2016)
   

Water purification

Balouch A et al., Review: Arsenic Remediation by Synthetic and Natural Adsorbents.
Pakistan Journal of Analytical & Environmental Chemistry, 18, (1), 18-36, (2017)
   

Water purification

Fiorenza R et al., Preferential removal of pesticides from water by molecular imprinting on TiO2 photocatalysts.
Chemical Engineering Journal, 379, Article122309-(2020)
   

Water quality

Villar-Navarro M et al., Easy, fast and environmental friendly method for the simultaneous extraction of the 16 EPA PAHs using magnetic molecular imprinted polymers (mag-MIPs).
Journal of Chromatography B, 1044-1045, 63-69, (2017)
   

Water quality

Kilulya KF, Preparation, characterisation and application of molecularly imprinted polymers for the selective removal of sterols from water.
Tanzania Journal of Science, 44, (2), 27-44, (2018)
   

Water quality

Ma WW et al., Novel electrochemical sensing platform based on ion imprinted polymer with nanoporous gold for ultrasensitive and selective determination of As3+.
Microchimica Acta, 187, (10), Article571-(2020)
   

water quality detection

Zhang P et al., Application of molecular imprinting technique in the sensor field of water quality detection.
Transducer and Microsystem Technologies, 25, (6), 9-12, (2006)
   

water quality detection

Zhang P et al., Application of molecularly imprinted polymers in water quality detection.
Water & Wastewater Engineering, 32, (3), 102-107, (2006)
   

water remediation

Mann S et al., Pressure-Stable Imprinted Polymers for Waste Water Remediation.
Polymers, 10, (7), ArticleNo704-(2018)
   

Water remediation molecular imprinting

Krupadam RJ et al., Removal of cyanotoxins from surface water resources using reusable molecularly imprinted polymer adsorbents.
Environmental Science and Pollution Research, 19, (5), 1841-1851, (2012)
   

Water resources

Madikizela LM et al., An initial assessment of naproxen, ibuprofen and diclofenac in Ladysmith water resources in South Africa using molecularly imprinted solid-phase extraction followed by high performance liquid chromatography-photodiode array detection.
South African Journal of Chemistry, 70, (1), 145-153, (2017)
   

Water reuse

Parlapiano M et al., Selective removal of contaminants of emerging concern (CECs) from urban water cycle via Molecularly Imprinted Polymers (MIPs): Potential of upscaling and enabling reclaimed water reuse.
Journal of Environmental Chemical Engineering, 9, (1), Article105051-(2021)
   

waters

Pichon V, Environmental sample treatment: Evolution and perspectives.
Analusis, 25, 101-106, (1997)
   

waters

Ferrer I et al., Validation of new solid-phase extraction materials for the selective enrichment of organic contaminants from environmental samples.
TrAC Trends in Analytical Chemistry, 18, (3), 180-192, (1999)
   

waters

Sabik H et al., Multiresidue methods using solid-phase extraction techniques for monitoring priority pesticides, including triazines and degradation products, in ground and surface waters.
Journal of Chromatography A, 885, (1-2), 217-236, (2000)
   

waters

Lanza F et al., The application of molecular imprinting technology to solid phase extraction.
Chromatographia, 53, (11-12), 599-611, (2001)
   

waters

Bravo JC et al., Selective solid-phase extraction of ethynylestradiol from river water by molecularly imprinted polymer microcolumns.
Analytical and Bioanalytical Chemistry, 393, (6), 1763-1768, (2009)
   

Water sample

Caro E et al., Application of molecularly imprinted polymers to solid-phase extraction of compounds from environmental and biological samples.
TrAC Trends in Analytical Chemistry, 25, (2), 143-154, (2006)
   

Water sample

Liu XJ et al., Uniform-sized molecularly imprinted polymer for metsulfuron-methyl by one-step swelling and polymerization method.
Talanta, 71, (3), 1205-1210, (2007)
   

Water sample

Yang T et al., Development of a selective molecularly imprinted polymer-based solid-phase extraction for indomethacin from water samples.
Analytical and Bioanalytical Chemistry, 391, (8), 2905-2914, (2008)
   

Water sample

Tang JS et al., Development of a competitive format sorbent assay for the determination of parathion in water using molecular imprinted polymer as specific sorbent carrier.
Chinese Chemical Letters, 21, (11), 1361-1365, (2010)
   

Water sample

Zhao WH et al., Preparation of dummy template imprinted polymers at surface of silica microparticles for the selective extraction of trace bisphenol A from water samples.
Journal of Hazardous Materials, 179, (1-3), 223-229, (2010)
   

Water sample

Lin ZK et al., Preparation of magnetic multi-functional molecularly imprinted polymer beads for determining environmental estrogens in water samples.
Journal of Hazardous Materials, 252-253, 57-63, (2013)
   

Water sample

Shi SY et al., Selective and simultaneous extraction and determination of hydroxybenzoic acids in aqueous solution by magnetic molecularly imprinted polymers.
Chemical Engineering Journal, 243, 485-493, (2014)
   

Water sample

Xu SF et al., Double water compatible molecularly imprinted polymers applied as solid-phase extraction sorbent for selective preconcentration and determination of triazines in complicated water samples.
Journal of Chromatography A, 1350, 23-29, (2014)
   

Water sample

Wang XY et al., A molecular imprinting-based turn-on Ratiometric fluorescence sensor for highly selective and sensitive detection of 2,4-dichlorophenoxyacetic acid (2,4-D).
Biosensors and Bioelectronics, 81, 438-444, (2016)
   

Water sample

Zhou TT et al., Selective and sensitive detection of tetrabromobisphenol-A in water samples by molecularly imprinted electrochemical sensor.
Sensors and Actuators B: Chemical, 236, 153-162, (2016)
   

Water sample

Si Y et al., Photo-assisted electrochemical detection of bisphenol A in water samples by renewable {001}-exposed TiO2 single crystals.
Water Research, 157, 30-39, (2019)
   

Water sample

Sarpong KA et al., Development and application of a novel electrochemical sensor based on AuNPS and difunctional monomer-MIPs for the selective determination of Tetrabromobisphenol-S in water samples.
Microchemical Journal, 154, Article104526-(2020)
   

water samples

Pichon V, Environmental sample treatment: Evolution and perspectives.
Analusis, 25, 101-106, (1997)
   

water samples

Kröger S et al., Biosensors for marine pollution research, monitoring and control.
Marine Pollution Bulletin, 45, (1-12), 24-34, (2002)
   

water samples

Pap T et al., Effect of solvents on the selectivity of terbutylazine imprinted polymer sorbents used in solid-phase extraction.
Journal of Chromatography A, 973, (1-2), 1-12, (2002)
   

water samples

Zhu QZ et al., Selective trace analysis of sulfonylurea herbicides in water and soil samples based on solid-phase extraction using a molecularly imprinted polymer.
Environmental Science & Technology, 36, (24), 5411-5420, (2002)
   

water samples

Chapuis F et al., Retention mechanism of analytes in the solid-phase extraction process using molecularly imprinted polymers - Application to the extraction of triazines from complex matrices.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 93-101, (2004)
   

water samples

Möller K et al., Determination of a flame retardant hydrolysis product in human urine by SPE and LC-MS. Comparison of molecularly imprinted solid-phase extraction with a mixed-mode anion exchanger.
Analytical and Bioanalytical Chemistry, 378, (1), 197-204, (2004)
   

water samples

San Vicente B et al., Continuous solid-phase extraction and preconcentration of bisphenol A in aqueous samples using molecularly imprinted columns.
Analytical and Bioanalytical Chemistry, 380, (1), 115-122, (2004)
   

water samples

Theodoridis G et al., Automated sample preparation based on the sequential injection principle - Solid-phase extraction on a molecularly imprinted polymer coupled on-line to high-performance liquid chromatography.
Journal of Chromatography A, 1030, (1-2), 69-76, (2004)
   

water samples

Watabe Y et al., Improved detectability with a polymer-based trapping device in rapid HPLC analysis for ultra-low levels of bisphenol A (BPA) in environmental samples.
Analytical Sciences, 20, (1), 133-137, (2004)
   

water samples

Watabe Y et al., Determination of bisphenol A in environmental water at ultra-low level by high-performance liquid chromatography with an effective on-line pretreatment device.
Journal of Chromatography A, 1032, (1-2), 45-49, (2004)
   

water samples

Jiang M et al., Direct enrichment and high performance liquid chromatography analysis of ultra-trace Bisphenol A in water samples with narrowly dispersible Bisphenol A imprinted polymeric microspheres column.
Journal of Chromatography A, 1110, (1-2), 27-34, (2006)
   

water samples

Bravo JC et al., A new molecularly imprinted polymer for the on-column solid-phase extraction of diethylstilbestrol from aqueous samples.
Analytical and Bioanalytical Chemistry, 388, (5), 1039-1045, (2007)
   

water samples

Alizadeh T et al., Multivariate optimization of molecularly imprinted polymer solid-phase extraction applied to parathion determination in different water samples.
Analytica Chimica Acta, 638, (2), 154-161, (2009)
   

water samples

Cacho C et al., Molecularly imprinted polymers: An analytical tool for the determination of benzimidazole compounds in water samples.
Talanta, 78, (3), 1029-1035, (2009)
   

water samples

Koohpaei AR et al., Optimization of solid-phase extraction using developed modern sorbent for trace determination of ametryn in environmental matrices.
Journal of Hazardous Materials, 170, (2-3), 1247-1255, (2009)
   

water samples

Zamora O et al., Determination of benzimidazole fungicides in water samples by on-line MISPE–HPLC.
Analytical and Bioanalytical Chemistry, 393, (6), 1745-1753, (2009)
   

water samples

El-Sheikh AH et al., Derivatization of 2-chlorophenol with 4-amino-anti-pyrine: A novel method for improving the selectivity of molecularly imprinted solid phase extraction of 2-chlorophenol from water.
Talanta, 83, (2), 667-673, (2010)
   

water samples

Gao RX et al., Synthesis and evaluation of molecularly imprinted core-shell carbon nanotubes for the determination of triclosan in environmental water samples.
Journal of Chromatography A, 1217, (52), 8095-8102, (2010)
   

water samples

Aufartová J et al., Determination of steroid hormones in biological and environmental samples using green microextraction techniques: An overview.
Analytica Chimica Acta, 704, (1-2), 33-46, (2011)
   

water samples

Khajeh M et al., Synthesis, characterization and removal of lead from water samples using lead-ion imprinted polymer.
Chemical Engineering Journal, 166, (3), 1158-1163, (2011)
   

water samples

Khajeh M et al., Synthesis of ion-selective imprinted polymer for manganese removal from environmental water.
Polymer Bulletin, 67, (3), 413-425, (2011)
   

water samples

Khajeh M et al., A pre-concentration procedure employing a new imprinted polymer for the determination of copper in water.
International Journal of Environmental Analytical Chemistry, 91, (13), 1310-1319, (2011)
   

water samples

Lucci P et al., Solid-phase extraction using molecularly imprinted polymer for selective extraction of natural and synthetic estrogens from aqueous samples.
Journal of Chromatography A, 1218, (30), 4828-4833, (2011)
   

water samples

Yuan LH et al., Electrochemical sensor based on molecularly imprinted membranes at platinum nanoparticles-modified electrode for determination of 17β-estradiol.
Biosensors and Bioelectronics, 29, (1), 29-33, (2011)
   

water samples

Guan W et al., Molecularly imprinted polymer surfaces as solid-phase extraction sorbents for the extraction of 2-nitrophenol and isomers from environmental water.
Journal of Separation Science, 35, (4), 490-497, (2012)
   

water samples

Lorenzo MÁ et al., Determination of butylparaben by adsorptive stripping voltammetry at glassy carbon electrodes modified with multi-wall carbon nanotubes.
Microchemical Journal, 110, 510-516, (2013)
   

water samples

Zhang WL et al., Novel surface molecularly imprinted polymers as solid-phase extraction sorbents for selective extraction of dihydroxybenzenes from environmental water samples.
Fresenius Environmental Bulletin, 22, (8), 2324-2333, (2013)
   

water samples

Jing T et al., Molecularly imprinted spin column extraction coupled with high-performance liquid chromatography for the selective and simple determination of trace nitrophenols in water samples.
Journal of Separation Science, 37, (20), 2940-2946, (2014)
   

water samples

González-Sálamo J et al., Evaluation of two molecularly imprinted polymers for the solid-phase extraction of natural, synthetic and mycoestrogens from environmental water samples before liquid chromatography with mass spectrometry.
Journal of Separation Science, 38, (15), 2692-2699, (2015)
   

water samples

Sun H et al., Solid-phase extraction based on a molecularly imprinted polymer for the selective determination of four benzophenones in tap and river water.
Journal of Separation Science, 38, (19), 3412-3420, (2015)
   

water samples

Surikumaran H et al., β-Cyclodextrin Based Molecularly Imprinted Solid Phase Extraction for Class Selective Extraction of Priority Phenols in Water Samples.
Separation Science and Technology, 50, (15), 2342-2351, (2015)
   

water samples

Zarei AR et al., Selective Determination of 2,4,6-Trinitrotoluene in Water Samples Based on Magnetic Imprinted Nanoparticles via Grafting Polymerization.
Journal of the Brazilian Chemical Society, 26, (4), 741-747, (2015)
   

water samples

Khajeh M et al., Application of the artificial neural network and imperialist competitive algorithm for optimization of molecularly imprinted solid phase extraction of methylene blue.
E-Polymers, 16, (3), 243-253, (2016)
   

water samples

Saraji M et al., A simple approach for the preparation of simazine molecularly imprinted nanofibers via self-polycondensation for selective solid-phase microextraction.
Analytica Chimica Acta, 936, 108-115, (2016)
   

water samples

Surikumaran H et al., Synthesis and evaluation of methacrylic acid functionalized β-cyclodextrin based molecular imprinted polymer for 2,4-dichlorophenol in water samples.
Desalination and Water Treatment, 57, (1), 254-267, (2016)
   

water samples

Ebrahimzadeh H et al., A novel lead imprinted polymer as the selective solid phase for extraction and trace detection of lead ions by flame atomic absorption spectrophotometry: Synthesis, characterization and analytical application.
Arabian Journal of Chemistry, 10, S2499-S2508, (2017)
   

water samples

Ji WH et al., Selective solid phase extraction of chloroacetamide herbicides from environmental water samples by amphiphilic magnetic molecularly imprinted polymers.
Talanta, 170, 111-118, (2017)
   

water samples

Guo P et al., Preparation of dummy template-imprinted polymers for the rapid extraction of nonsteroidal anti-inflammatory drugs residues in aquatic environmental samples.
Biomedical Chromatography, 32, (6), ArticleNoe4193-(2018)
   

water samples

Zhang ZL et al., Preparation of molecularly imprinted ordered mesoporous silica for rapid and selective separation of trace bisphenol A from water samples.
Applied Surface Science, 448, 380-388, (2018)
   

water samples

Zhou TY et al., Preparation of magnetic superhydrophilic molecularly imprinted composite resin based on multi-walled carbon nanotubes to detect triazines in environmental water.
Chemical Engineering Journal, 334, 2293-2302, (2018)
   

water samples

Liu C et al., A novel nanobiocomposite sandwich immunosensor based on molecularly imprinted nano-membrane for endotoxin detection.
Sensors and Actuators B: Chemical, 290, 1-8, (2019)
   

water samples

Liu YC et al., Dummy-template molecularly imprinted micro-solid-phase extraction coupled with high-performance liquid chromatography for bisphenol A determination in environmental water samples.
Microchemical Journal, 145, 337-344, (2019)
   

water samples

Beduk T et al., One-step electrosynthesized molecularly imprinted polymer on laser scribed graphene bisphenol a sensor.
Sensors and Actuators B: Chemical, 314, Article128026-(2020)
   

water samples

Wang D et al., Multitemplate molecularly imprinted polymeric solid-phase microextraction fiber coupled with HPLC for endocrine disruptor analysis in water samples.
Microchemical Journal, 155, Article104802-(2020)
   

water samples

Zhang Z et al., Synthesis of dummy-template molecularly imprinted polymer adsorbents for solid phase extraction of aminoglycosides antibiotics from environmental water samples.
Talanta, 208, Article120385-(2020)
   

water samples

Teixeira RA et al., Microextraction by packed molecularly imprinted polymer followed by ultra-high performance liquid chromatography for determination of fipronil and fluazuron residues in drinking water and veterinary clinic wastewater.
Microchemical Journal, 168, Article106405-(2021)
   

Water sampling

Wankar S et al., Polythiophene nanofilms for sensitive fluorescence detection of viruses in drinking water.
Biosensors and Bioelectronics, 82, 20-25, (2016)
   

Water-soil interface

Sturini M et al., Environmental photochemistry of fluoroquinolones in soil and in aqueous soil suspensions under solar light.
Environmental Science and Pollution Research, 21, (23), 13215-13221, (2014)
   

Water solubility

Dai QZ et al., Adsorption and specific recognition of DNA by using imprinted polymer layers grafted onto ionic liquid functionalized magnetic microspheres.
Microchimica Acta, 184, (11), 4433-4441, (2017)
   

water soluble

Zhang SZ et al., Tuning surface-cross-linking of molecularly imprinted cross-linked micelles for molecular recognition in water.
Journal of Molecular Recognition, 32, (4), ArticleNo.e2769-(2019)
   

Water-soluble acid dyes

Luo XB et al., Removal of water-soluble acid dyes from water environment using a novel magnetic molecularly imprinted polymer.
Journal of Hazardous Materials, 187, (1-3), 274-282, (2011)
   

Water-soluble acid dyes

Luo XB et al., Novel molecularly imprinted polymer using 1-(α-methyl acrylate)-3-methylimidazolium bromide as functional monomer for simultaneous extraction and determination of water-soluble acid dyes in wastewater and soft drink by solid phase extraction and high performance liquid chromatography.
Journal of Chromatography A, 1218, (8), 1115-1121, (2011)
   

Watersoluble crosslinking agent

Kubo T et al., Preparation of a novel molecularly imprinted polymer using a water-soluble crosslinking agent.
Analytical and Bioanalytical Chemistry, 382, (7), 1698-1701, (2005)
   

Water-soluble functional monomer

Ji WH et al., Superhydrophilic molecularly imprinted polymers based on a water-soluble functional monomer for the recognition of gastrodin in water media.
Journal of Chromatography A, 1425, 88-96, (2015)
   

Water-soluble functional monomer

Zhao WR et al., Electrochemical magnetic imprinted sensor based on MWCNTs@CS/CTABr surfactant composites for sensitive sensing of diethylstilbestrol.
Journal of Electroanalytical Chemistry, 818, 181-190, (2018)
   

water-soluble polymers

Horak D et al., Packings for size exclusion chromatography: Preparation and some properties.
Strategies In Size Exclusion Chromatography, 635, 190-210, (1996)
   

water-soluble polymers

Goulet-Hanssens A et al., Photo-control of biological systems with azobenzene polymers.
Journal of Polymer Science Part A: Polymer Chemistry, 51, (14), 3058-3070, (2013)
   

WATER-SOLUBLE SILICATES

Smarsly B et al., Preparation of porous silica materials via sol-gel nanocasting of nonionic surfactants: A mechanistic study on the self-aggregation of amphiphiles for the precise prediction of the mesopore size.
Journal of Physical Chemistry B, 105, (43), 10473-10483, (2001)
   

Water-soluble vitamins

Suwanwong Y et al., Molecularly imprinted polymers for the extraction and determination of water-soluble vitamins: A review from 2001 to 2020.
European Polymer Journal, 161, Article110835-(2021)
   

Water sorption

Bitar M et al., Water sorption isotherms of molecularly imprinted polymers. Relation between water binding and iprodione binding capacity.
Reactive and Functional Polymers, 114, 1-7, (2017)
   

water treatment

Lin Y et al., Removal of phenolic estrogen pollutants from different sources of water using molecularly imprinted polymeric microspheres.
Environmental Pollution, 153, (2), 483-491, (2008)
   

water treatment

Qi JY et al., Selective removal of Cu(II) from contaminated water using molecularly imprinted polymer.
Frontiers of Chemical Engineering in China, 2, (1), 109-114, (2008)
   

water treatment

Khulbe KC et al., The art of surface modification of synthetic polymeric membranes.
Journal of Applied Polymer Science, 115, (2), 855-895, (2010)
   

water treatment

Krupadam RJ et al., Removal of probable human carcinogenic polycyclic aromatic hydrocarbons from contaminated water using molecularly imprinted polymer.
Water Research, 44, (3), 681-688, (2010)
   

water treatment

Lai EPC et al., Characterization of molecularly imprinted and nonimprinted polymer submicron particles specifically tailored for removal of trace 17β-estradiol in water treatment.
Journal of Applied Polymer Science, 116, (3), 1499-1508, (2010)
   

water treatment

Dai CM et al., Selective removal of diclofenac from contaminated water using molecularly imprinted polymer microspheres.
Environmental Pollution, 159, (6), 1660-1666, (2011)
   

water treatment

Proceeding, Kalita H et al, Novel Arsenic Ion-Imprinted Polymer: Simultaneous Removal As(III) and As(V) from Water, 
Beighley REII, Kilgore MW (Eds.), 
356, (2011)
   

water treatment

Liu YY et al., Preparation of Surface Molecular Imprinting Microspheres and Its Application in Water Treatment.
Materials Review, 25, (7), 131-134, (2011)
   

water treatment

Dai CM et al., Selective removal of acidic pharmaceuticals from contaminated lake water using multi-templates molecularly imprinted polymer.
Chemical Engineering Journal, 211-212, 302-309, (2012)
   

water treatment

Schillinger E et al., An Artificial Estrogen Receptor through Combinatorial Imprinting.
Chemistry - A European Journal, 18, (46), 14773-14783, (2012)
   

water treatment

Zhang YL et al., Sorption of carbamazepine from water by magnetic molecularly imprinted polymers based on chitosan-Fe3O4.
Carbohydrate Polymers, 97, (2), 809-816, (2013)
   

water treatment

Venkatesh A et al., Removal of acutely hazardous pharmaceuticals from water using multi-template imprinted polymer adsorbent.
Environmental Science and Pollution Research, 21, (10), 6603-6611, (2014)
   

water treatment

Casis N et al., Molecularly imprinted hydrogels from colloidal crystals for the detection of progesterone.
Polymer International, 64, (6), 773-779, (2015)
   

water treatment

Chen FF et al., Magnetic molecularly imprinted polymers synthesized by surface-initiated reversible addition-fragmentation chain transfer polymerization for the enrichment and determination of synthetic estrogens in aqueous solution.
Journal of Separation Science, 38, (15), 2670-2676, (2015)
   

water treatment

Herrero-Hernández E et al., Efficiency of a molecularly imprinted polymer for selective removal of phenols and phenoxyacids from contaminated waters.
International Journal of Environmental Science and Technology, 12, (10), 3079-3088, (2015)
   

water treatment

Ma W et al., Core-shell molecularly imprinted polymers based on magnetic chitosan microspheres for chloramphenicol selective adsorption.
Monatshefte für Chemie - Chemical Monthly, 146, (3), 465-474, (2015)
   

water treatment

Sánchez-Polo M et al., Molecular imprinted polymer to remove tetracycline from aqueous solutions.
Microporous And Mesoporous Materials, 203, 32-40, (2015)
   

water treatment

Beyki T et al., Selective removal of dicamba from aqueous samples using molecularly imprinted polymer nanospheres.
Journal of Water and Environmental Nanotechnology, 1, (1), 19-25, (2016)
   

water treatment

Chen FF et al., Synthesis and characterization of photo-responsive magnetic molecularly imprinted microspheres for the detection of sulfonamides in aqueous solution.
Journal of Separation Science, 39, (24), 4866-4875, (2016)
   

water treatment

Meischl F et al., Synthesis and evaluation of a novel molecularly imprinted polymer for the selective isolation of acetylsalicylic acid from aqueous solutions.
Journal of Environmental Chemical Engineering, 4, (Part A), 4083-4090, (2016)
   

water treatment

Anwar A et al., Synthesis and Characterization of Molecular Imprinted Polymer for the Recognition and Removal of Cephradine.
Sensor Letters, 15, (1), 32-36, (2017)
   

water treatment

Abbasi Ghaeni F et al., Preparation of dual-template molecularly imprinted nanoparticles for organophosphate pesticides and their application as selective sorbents for water treatment.
Separation Science and Technology, 53, (16), 2517-2526, (2018)
   

water treatment

Cantarella M et al., Selective photodegradation of paracetamol by molecularly imprinted ZnO nanonuts.
Applied Catalysis B: Environmental, 238, 509-517, (2018)
   

water treatment

Li X et al., Synthesis of a molecularly imprinted polymer on mSiO2@Fe3O4 for the selective adsorption of atrazine.
Journal of Separation Science, 41, (13), 2837-2845, (2018)
   

water treatment

Mansouri E et al., Preparation and Characterization of Herbicide Mecoprop Imprinted Polymer and Its Application as a Selective Sorbent in Water Sample.
Bulletin of Environmental Contamination and Toxicology, 101, (5), 657-663, (2018)
   

water treatment

Bektas H et al., Development of ion-imprinted cryogels for selective removal of arsenic from environmental waters.
Biointerface Research in Applied Chemistry, 9, (4), 4119-4125, (2019)
   

water treatment

Cantarella M et al., Molecularly imprinted polymer for selective adsorption of diclofenac from contaminated water.
Chemical Engineering Journal, 367, 180-188, (2019)
   

water treatment

Fiorenza R et al., Selective photodegradation of 2,4-D pesticide from water by molecularly imprinted TiO2.
Journal of Photochemistry and Photobiology A-Chemistry, 380, Article111872-(2019)
   

water treatment

Kumar A et al., Synthesis, adsorption and analytical applicability of Ni-imprinted polymer for selective adsorption of Ni2+ ions from the aqueous environment.
Polymer Testing, 77, Article105871-(2019)
   

Water treatment applications

Book chapter, Kotrotsiou Oet al., Water Treatment by Molecularly Imprinted Materials, 
In: Nanoscale Materials in Water Purification, Thomas S, Pasquini D, Leu SY, Gopakumar DA (Eds.) 
Elsevier: 179-230, (2019)    

water washing

Wu SL et al., Excellent Regeneration of Inorganic-framework Molecularly Imprinted TiO2 and its Regeneration Mechanism.
Journal of Advanced Oxidation Technologies, 18, (2), 361-367, (2015)
   

Waveguide

Edmiston PL et al., Detection of vapor phase trinitrotoluene in the parts-per-trillion range using waveguide interferometry.
Sensors and Actuators B: Chemical, 143, (2), 574-582, (2010)
   

Waveguide devices

Barrios CA et al., Molecularly imprinted polymer for label-free integrated optical waveguide bio(mimetic)sensors.
Sensors and Actuators B: Chemical, 161, (1), 607-614, (2012)
   

waveguides

Uchiyamada K et al., Perforated Bimodal Interferometric Biosensor for Affinity Sensing.
Advanced Materials Technologies, 4, (9), Article1800533-(2019)
   

WB97XD functional

Gomez-Pineda LE et al., A Computational Approach to Studying Ciprofloxacin and Methacrylic Acid in Pre-Polymerization Phase.
Revista Mexicana de Ingenieria Quimica, 15, (2), 667-674, (2016)
   

WB97XD functional

Gómez-Pineda LE et al., A Computational Approach to Studying Ciprofloxacin and Methacrylic Acid in Pre-polymerization Phase.
Revista Mexicana de Ingeniería Química, 15, (2), 667-674, (2016)
   

W2C nanoparticles

Hussain S et al., Facile preparation of tungsten carbide nanoparticles for an efficient oxalic acid sensor via imprinting.
Microchemical Journal, 159, Article105404-(2020)
   

weak affinity chromatography

Andersson HS et al., Study of the nature of recognition in molecularly imprinted polymers.
Journal of Molecular Recognition, 9, (5-6), 675-682, (1996)
   

Weakest Interaction Model

Proceeding, Rong F et al, Study on the Weakest Interaction Model for Chiral Resolution Using Molecularly Imprinted Polymer, 
In: Advanced Materials Research, Zhang HM, Wu B (Eds.), 
111-115, (2011)
   

wearable

Tsow F et al., A Wearable and Wireless Sensor System for Real-Time Monitoring of Toxic Environmental Volatile Organic Compounds.
IEEE Sensors Journal, 9, (12), 1734-1740, (2009)
   

Wearable and noninvasive

Zhang QW et al., Wearable electrochemical biosensor based on molecularly imprinted Ag nanowires for noninvasive monitoring lactate in human sweat.
Sensors and Actuators B: Chemical, 320, Article128325-(2020)
   

wearable and written sensors

Kozitsina AN et al., Sensors Based on Bio and Biomimetic Receptors in Medical Diagnostic, Environment, and Food Analysis.
Biosensors, 8, (2), ArticleNo35-(2018)
   

Wearable sensor

Zhou LP, Molecularly Imprinted Sensor based on Ag-Au NPs/SPCE for Lactate Determination in Sweat for Healthcare and Sport Monitoring.
International Journal of Electrochemical Science, 16, Article211043-(2021)
   

WELL

Nishide H et al., Selective adsorption of metal ions on poly(4-vinylpyridine) resins in which the ligand chain is immobilized by crosslinking.
Makromolekulare Chemie-Macromolecular Chemistry And Physics, 177, (8), 2295-2310, (1976)
   

WELL

Wulff G et al., On polymers with enzyme-analogous structure .15. On the synthesis of (R)-1-(4-vinylphenyl)ethylamine and (S)-1-(4-vinylphenyl)ethylamine and some other monomers with functional-groups.
Makromolekulare Chemie-Macromolecular Chemistry And Physics, 183, (10), 2459-2467, (1982)
   

WELL

Andersson L et al., Synthesis of a new amino-acid based cross-linker for preparation of substrate selective acrylic polymers.
Tetrahedron Letters, 26, (30), 3623-3624, (1985)
   

WELL

Lauer M et al., On the chemistry of binding-sites, 4. On an unusual increase in reactivity of arylboronic acids by neighboring groups.
Chemische Berichte-Recueil, 118, 246-260, (1985)
   

WELL

Wulff G et al., On the chemistry of binding-sites .6. On the suitability of various aldehydes and ketones as binding-sites for monoalcohols.
Chemische Berichte-Recueil, 119, 1876-1889, (1986)
   

WELL

Sellergren B, Molecular imprinting by noncovalent interactions - enantioselectivity and binding-capacity of polymers prepared under conditions favoring the formation of template complexes.
Makromolekulare Chemie-Macromolecular Chemistry And Physics, 190, (11), 2703-2711, (1989)
   

WELL

Wulff G et al., Enzyme-analogue built polymers .25. Synthesis of macroporous copolymers from a-amino-acid based vinyl compounds.
Makromolekulare Chemie-Macromolecular Chemistry And Physics, 190, (7), 1717-1726, (1989)
   

WELL

Braco L et al., Production of abiotic receptors by molecular imprinting of proteins.
Proceedings of the National Academy of Sciences of the United States of America, 87, (1), 274-277, (1990)
   

WELL

Wulff G et al., On the chemistry of binding-sites .7. Enantioselective binding using chiral boronic acids.
Recueil Des Travaux Chimiques Des Pays-Bas-Journal Of The Royal Netherlands Chemical Society, 109, 216-221, (1990)
   

WELL

Rosatzin T et al., Preparation of Ca2+ selective sorbents by molecular imprinting using polymerizable ionophores.
Journal of the Chemical Society-Perkin Transactions 2, (8), 1261-1265, (1991)
   

WELL

Wulff G et al., Enzyme-analog built polymers .29. The preparation of defined chiral cavities for the racemic-resolution of free sugars.
Makromolekulare Chemie-Macromolecular Chemistry And Physics, 192, (6), 1329-1338, (1991)
   

WELL

Piletskii SA et al., Construction of molecular sensors based on substrate-selective polymeric membranes.
Journal of Analytical Chemistry, 47, (9), 1231-1234, (1992)
   

WELL

Piletsky SA et al., Sensors for low-weight organic-molecules based on molecular imprinting technique.
Sensors and Actuators B: Chemical, 19, (1-3), 629-631, (1994)
   

WELL

Braco L, Biocatalysis and biorecognition in nonaqueous media - some perspectives in analytical biochemistry.
Mikrochimica Acta, 120, (1-4), 231-242, (1995)
   

WELL

Glad M et al., Molecularly imprinted composite polymers based on trimethylolpropane trimethacrylate (TRIM) Particles for efficient enantiomeric separations.
Reactive Polymers, 25, (1), 47-54, (1995)
   

WELL

Okahata Y et al., Enhancing enantioselectivity of a lipid-coated lipase via imprinting methods for esterification in organic-solvents.
Tetrahedron: Asymmetry, 6, 1311-1322, (1995)
   

WELL

Horak D et al., Packings for size exclusion chromatography: Preparation and some properties.
Strategies In Size Exclusion Chromatography, 635, 190-210, (1996)
   

WELL

Ramström O et al., Chiral recognition in adrenergic receptor binding mimics prepared by molecular imprinting.
Journal of Molecular Recognition, 9, (5-6), 691-696, (1996)
   

WELL

Hara T et al., Separation of rare earth metals by imprinted polymers utilizing surface template polymerization.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 30-30, (1997)
   

WELL

Mosbach K, The emerging technique of molecular imprinting and its future impact on biotechnology.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 111-111, (1997)
   

WELL

Uezu K et al., Metal ion-imprinted polymers prepared by surface template polymerization with W/O emulsions.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 101-101, (1997)
   

WELL

Yano K et al., Stereoselective recognition of dipeptide derivatives in molecularly imprinted polymers which incorporate an L-valine derivative as a novel functional monomer.
Analytica Chimica Acta, 357, (1-2), 91-98, (1997)
   

WELL

Dickert FL et al., Molecular imprinting in chemical sensing - Detection of aromatic and halogenated hydrocarbons as well as polar solvent vapors.
Fresenius Journal of Analytical Chemistry, 360, (7/8), 759-762, (1998)
   

WELL

Heegaard NHH et al., Affinity capillary electrophoresis: important application areas and some recent developments.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 715, (1), 29-54, (1998)
   

WELL

Ramström O et al., Molecular imprinting technology: Challenges and prospects for the future.
Chirality, 10, (3), 195-209, (1998)
   

WELL

Sajonz P et al., Study of the thermodynamics and mass transfer kinetics of two enantiomers on a polymeric imprinted stationary phase.
Journal of Chromatography A, 810, (1-2), 1-17, (1998)
   

WELL

Book chapter, Scheller FWet al., New recognition elements in biosensing, 
In: Enzyme Engineering XIV, Laskin AI, Li GX, Yu YT (Eds.) 
New York Academy of Sciences: New York, 37-45, (1998)    

WELL

Caruso F et al., Production of hollow microspheres from nanostructured composite particles.
Chemistry of Materials, 11, (11), 3309-3314, (1999)
   

WELL

Dickert FL et al., Imprinting with sensor development - On the way to synthetic antibodies.
Fresenius Journal of Analytical Chemistry, 364, (6), 506-511, (1999)
   

WELL

Haupt K et al., Imprinted polymer-based enantioselective acoustic sensor using a quartz crystal microbalance.
Analytical Communications, 36, (12), 391-393, (1999)
   

WELL

Hosoya K et al., An unexpected molecular imprinting effect for a polyaromatic hydrocarbon, anthracene, using uniform size ethylene dimethacrylate particles.
HRC - Journal of High Resolution Chromatography, 22, (5), 256-260, (1999)
   

WELL

Joshi VP et al., Molecularly imprinted adsorbents for positional isomer separation.
Journal of Chromatography A, 849, (2), 319-330, (1999)
   

WELL

Lele BS et al., Productive and nonproductive substrate binding in enzyme mimics.
Polymer, 40, (14), 4063-4070, (1999)
   

WELL

Nakashima K et al., Saccharide libraries as potential templates for regio- and chiroselective introduction of two functional groups into [60]fullerene.
Journal of Organic Chemistry, 64, (3), 984-990, (1999)
   

WELL

Olsen J et al., Methodology for assessing the properties of molecular imprinted polymers for solid phase extraction.
Analyst, 124, (4), 467-471, (1999)
   

WELL

Owens PK et al., Molecular imprinting for bio-and pharmaceutical analysis.
TrAC Trends in Analytical Chemistry, 18, (3), 146-154, (1999)
   

WELL

Peissker F et al., Crosslinking of imprinted proteases to maintain a tailor-made substrate selectivity in aqueous solutions.
Bioorganic & Medicinal Chemistry, 7, 2231-2237, (1999)
   

WELL

Suedee R et al., Chiral determination of various adrenergic drugs by thin-layer chromatography using molecularly imprinted chiral stationary phases prepared with a-agonists.
Analyst, 124, (7), 1003-1009, (1999)
   

WELL

Yilmaz E et al., Influence of functional and cross-linking monomers and the amount of template on the performance of molecularly imprinted polymers in binding assays.
Analytical Communications, 36, (5), 167-170, (1999)
   

WELL

Yoshida M et al., Metal ion imprinted microsphere prepared by surface molecular imprinting technique using water-in-oil-in-water emulsions.
Journal of Applied Polymer Science, 73, (7), 1223-1230, (1999)
   

WELL

Iqbal SS et al., Artificial receptors: molecular imprints discern closely related toxins.
Materials Science & Engineering C-Biomimetic And Supramolecular Systems, 7, 77-81, (2000)
   

WELL

Murray GM et al., Portable sensor for illicit cocaine based on a molecularly imprinted polymer.
unknown source, (2000)
   

WELL

Oral E et al., Molecular imprinting in biological systems.
Stp Pharma Sciences, 10, (4), 261-267, (2000)
   

WELL

Sasaki DY et al., Solid-state 31P NMR study of phosphonate binding sites in guanidine-functionalized, molecular imprinted silica xerogels.
Chemistry of Materials, 12, (5), 1400-1407, (2000)
   

WELL

Schweitz L et al., Alternative methods providing enhanced sensitivity and selectivity in capillary electroseparation experiments.
Journal of Chromatography A, 892, (1-2), 203-217, (2000)
   

WELL

Severin K, Imprinted polymers with transition metal catalysts.
Current Opinion in Chemical Biology, 4, (6), 710-714, (2000)
   

WELL

Svec F et al., Design of the monolithic polymers used in capillary electrochromatography columns.
Journal of Chromatography A, 887, (1-2), 3-29, (2000)
   

WELL

Wang GQ et al., Gel catalysts that switch on and off.
Proceedings of the National Academy of Sciences of the United States of America, 97, (18), 9861-9864, (2000)
   

WELL

Batra D et al., Molecular imprinting of oligonucleotides.
Abstracts of Papers of the American Chemical Society, 221, (ORGN), 158-158, (2001)
   

WELL

Brüggemann O, Chemical reaction engineering using molecularly imprinted polymeric catalysts.
Analytica Chimica Acta, 435, (1), 197-207, (2001)
   

WELL

Buchmeiser MR, New synthetic ways for the preparation of high-performance liquid chromatography supports.
Journal of Chromatography A, 918, (2), 233-266, (2001)
   

WELL

Chen YB et al., Influence of the pH on the behavior of an imprinted polymeric stationary phase - supporting evidence for a binding site model.
Journal of Chromatography A, 927, (1-2), 1-17, (2001)
   

WELL

Dickert FL et al., Synthetic receptors as sensor coatings for molecules and living cells.
Analyst, 126, (6), 766-771, (2001)
   

WELL

Gill I, Bio-doped nanocomposite polymers: Sol-gel bioencapsulates.
Chemistry of Materials, 13, (10), 3404-3421, (2001)
   

WELL

Kapua A et al., Molecularly imprinted polymer thin films and microstructures.
Abstracts of Papers of the American Chemical Society, 221, (IEC), 403-403, (2001)
   

WELL

Luppa PB et al., Immunosensors - principles and applications to clinical chemistry.
Clinica Chimica Acta, 314, (1-2), 1-26, (2001)
   

WELL

Martín-Esteban A, Molecularly imprinted polymers: new molecular recognition materials for selective solid-phase extraction of organic compounds.
Fresenius Journal of Analytical Chemistry, 370, (7), 795-802, (2001)
   

WELL

Shimizu KD et al., Selective chemical modification of molecularly imprinted polymers.
Abstracts of Papers of the American Chemical Society, 221, (MSE), 469-469, (2001)
   

WELL

Spégel P et al., Molecularly imprinted microparticles for capillary electrochromatography: Studies on microparticle synthesis and electrolyte composition.
Electrophoresis, 22, (17), 3833-3841, (2001)
   

WELL

Sreenivasan K, Molecularly imprinted polyacrylic acid containing multiple recognition sites for steroids.
Journal of Applied Polymer Science, 82, (4), 889-893, (2001)
   

WELL

Sun BW et al., Molecularly imprinted polymer using p-hydroxybenzoic acid, p- hydroxyphenylacetic acid and p-hydroxyphenylpropionic acid as templates.
Journal of Molecular Recognition, 14, (6), 388-392, (2001)
   

WELL

Vaidya AA et al., Creating a macromolecular receptor by affinity imprinting.
Journal of Applied Polymer Science, 81, (5), 1075-1083, (2001)
   

WELL

Baggiani C et al., A molecular imprinted polymer with recognition properties towards the carcinogenic mycotoxin ochratoxin A.
Bioseparation, 10, (6), 389-394, (2002)
   

WELL

Book chapter, Brazel CS, Biomedical sensing, 
In: Encyclopedia of Smart Materials, Schwartz M (Ed.) 
Wiley: 95-111, (2002)    

WELL

Hilder EF et al., Polymeric monolithic stationary phases for capillary electrochromatography.
Electrophoresis, 23, (22-23), 3934-3953, (2002)
   

WELL

Kirchner R et al., Calorimetric investigation of chiral recognition processes in a molecularly imprinted polymer.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 43, (3-4), 279-283, (2002)
   

WELL

Liu GD et al., Utilization of synergetic effect of weak interactions in the design of polymeric sorbents with high sorption selectivity.
Journal of Chromatography A, 952, (1-2), 71-78, (2002)
   

WELL

Suedee R et al., Enantioselective release of controlled delivery granules based on molecularly imprinted polymers.
Drug Delivery, 9, (1), 19-30, (2002)
   

WELL

Suedee R et al., Stereoselective release behaviors of imprinted bead matrices.
Drug Development and Industrial Pharmacy, 28, (5), 545-554, (2002)
   

WELL

Tovar GEM et al., Molecularly imprinted nanospheres as synthetic affinity material for biotechnical application.
Abstracts of Papers of the American Chemical Society, 224, (COLL), 364-364, (2002)
   

WELL

Zhang LY et al., Molecular selectivity of tyrosine-imprinted polymers prepared by seed swelling and suspension polymerization.
Polymer International, 51, (8), 687-692, (2002)
   

WELL

Cui DX et al., Advance and prospect of bionanomaterials.
Biotechnology Progress, 19, (3), 683-692, (2003)
   

WELL

Proceeding, Dickert FL et al, Selfassembling around templates - Creating nano dots and pits for chemical sensing, 
Velev OD, Bunning TJ, Xia Y, Yang P (Eds.), 
37-42, (2003)
   

WELL

Emgenbroich M et al., A new enzyme model for enantioselective esterases based on molecularly imprinted polymers.
Chemistry - A European Journal, 9, (17), 4106-4117, (2003)
   

WELL

Hennion MC et al., Immuno-based sample preparation for trace analysis.
Journal of Chromatography A, 1000, (1-2), 29-52, (2003)
   

WELL

Hilal N et al., Thin layer composite molecularly imprinted membranes for selective separation of cAMP.
Separation and Purification Technology, 31, (3), 281-289, (2003)
   

WELL

Hoogenboom R et al., Combinatorial methods, automated synthesis and high-throughput screening in polymer research: Past and present.
Macromolecular Rapid Communications, 24, (1), 16-32, (2003)
   

WELL

Jiskra J et al., Stationary and mobile phases in capillary electrochromatography (CEC).
Journal of Separation Science, 26, (15-16), 1305-1330, (2003)
   

WELL

Kato K et al., Polymer surface with graft chains.
Progress in Polymer Science, 28, (2), 209-259, (2003)
   

WELL

Kochkodan V et al., Composite microfiltration membranes imprinted with cAMP.
Chemical Engineering & Technology, 26, (4), 463-468, (2003)
   

WELL

Kolarz BN et al., The role of porous structure copolymers as catalytic systems carriers.
Polimery, 48, (7-8), 490-498, (2003)
   

WELL

Koter I et al., Kinetic resolution of chiral alcohols in bifunctional membrane exhibiting enzyme activity and enantioselective permeation.
Journal of Molecular Catalysis B: Enzymatic, 24-25, (1), 17-26, (2003)
   

WELL

Kraft M et al., New frontiers for mid-infrared sensors: Towards deep sea monitoring with a submarine FT-IR sensor system.
Applied Spectroscopy, 57, (6), 591-599, (2003)
   

WELL

Mitchell-Koch JT et al., Immobilization of a europium salen complex within porous organic hosts: Modulation of luminescence properties in different chemical environments.
Chemistry of Materials, 15, (18), 3490-3495, (2003)
   

WELL

Picó Y et al., Capillary electrophoresis for the determination of pesticide residues.
TrAC Trends in Analytical Chemistry, 22, (3), 133-151, (2003)
   

WELL

Quaglia M et al., Molecularly imprinted polymer films grafted from porous or nonporous silica: Novel affinity stationary phases in capillary electrochromatography.
Electrophoresis, 24, (6), 952-957, (2003)
   

WELL

Ramamoorthy M et al., Molecular imprinting of cellulose acetate-sulfonated polysulfone blend membranes for Rhodamine B by phase inversion technique.
Journal of Membrane Science, 217, (1-2), 207-214, (2003)
   

WELL

Spégel P et al., Molecularly imprinted polymers in capillary electrochromatography: Recent developments and future trends.
Electrophoresis, 24, (22-23), 3892-3899, (2003)
   

WELL

Striegler S, Selective carbohydrate recognition by synthetic receptors in aqueous solution.
Current Organic Chemistry, 7, (1), 81-102, (2003)
   

WELL

Yang G et al., Adsorption isotherms on aminoantipyrine imprinted polymer stationary phase.
Chromatographia, 58, (1-2), 53-58, (2003)
   

WELL

Zhang HQ et al., Application of a parallel synthetic approach in atom-transfer radical polymerization: Set-up and feasibility demonstration.
Macromolecular Rapid Communications, 24, (1), 81-86, (2003)
   

WELL

Zhang ML et al., On-line solid-phase extraction of ceramides from yeast with ceramide III imprinted monolith.
Journal of Chromatography A, 984, (2), 173-183, (2003)
   

WELL

Chen X et al., Liquid chromatography of active principles in Sophora flavescens root.
Journal of Chromatography B, 812, (1-2), 149-163, (2004)
   

WELL

Cormack PAG et al., Molecularly imprinted polymers: synthesis and characterisation.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 173-182, (2004)
   

WELL

Dickert FL et al., Modifying polymers by self-organisation for the mass-sensitive detection of environmental and biogeneous analytes.
Sensors and Actuators B: Chemical, 100, (1-2), 112-116, (2004)
   

WELL

Book chapter, Dickert FLet al., Molecular imprinting - a universal strategy for the development of chemosensors, 
In: Sensors And Measuring Systems 2004, 
611-615, (2004)    

WELL

Garcés JL et al., Affinity distribution functions in multicomponent heterogeneous adsorption. Analytical inversion of isotherms to obtain affinity spectra.
Journal of Chemical Physics, 120, (19), 9266-9276, (2004)
   

WELL

Haginaka J et al., Chiral resolution of derivatized amino acids using uniformly sized molecularly imprinted polymers in hydro-organic mobile phases.
Analytical and Bioanalytical Chemistry, 378, (8), 1907-1912, (2004)
   

WELL

Hilder EF et al., Development and application of polymeric monolithic stationary phases for capillary electrochromatography.
Journal of Chromatography A, 1044, (1-2), 3-22, (2004)
   

WELL

Huang YC et al., Preparation and evaluation of molecularly imprinted polymers based on 9-ethyladenine for the recognition of nucleotide bases in capillary electrochromatography.
Electrophoresis, 25, (4-5), 554-561, (2004)
   

WELL

Jiang Y et al., Synthesis of molecularly imprinted microspheres for recognition of trans-aconitic acid.
Journal of Applied Polymer Science, 94, (2), 542-547, (2004)
   

WELL

Karlsson JG et al., The roles of template complexation and ligand binding conditions on recognition in bupivacaine molecularly imprinted polymers.
Analyst, 129, (5), 456-462, (2004)
   

WELL

Kim Y et al., Advances in environmental technologies via the application of mesoporous materials.
Journal of Industrial and Engineering Chemistry, 10, (1), 41-51, (2004)
   

WELL

Kubo T et al., Recognition of hepatotoxic homologues of Microcystin using a combination of selective adsorption media.
Journal of Separation Science, 27, (4), 316-324, (2004)
   

WELL

Li P et al., Study on the binding characteristic of S-naproxen imprinted polymer and the interactions between templates and monomers.
Journal of Analytical Chemistry, 59, (10), 939-944, (2004)
   

WELL

Lisichkin GV et al., Chemically modified oxide surfaces capable of molecular recognition.
Colloid Journal, 66, (4), 387-399, (2004)
   

WELL

Liu ZS et al., Chiral separation of binaphthol enantiomers on molecularly imprinted polymer monolith by capillary electrochromatography.
Analytical Sciences, 20, (4), 673-678, (2004)
   

WELL

Meier MAR et al., Combinatorial methods, automated synthesis and high-throughput screening in polymer research: The evolution continues.
Macromolecular Rapid Communications, 25, (1), 21-33, (2004)
   

WELL

Oral E et al., Dynamic studies of molecular imprinting polymerizations.
Polymer, 45, (18), 6163-6173, (2004)
   

WELL

Pichon V et al., A dual analytical approach for the selective extraction of organic pollutants in environmental matrices: immunosorbents and molecularly imprinted polymers.
Actualité Chimique, 277-278, 15-26, (2004)
   

WELL

Syu MJ et al., Towards bilirubin imprinted poly(methacrylic acid-co-ethylene glycol dimethylacrylate) for the specific binding of a-bilirubin.
Analytica Chimica Acta, 504, (1), 167-177, (2004)
   

WELL

Turiel E et al., Molecularly imprinted polymers: towards highly selective stationary phases in liquid chromatography and capillary electrophoresis.
Analytical and Bioanalytical Chemistry, 378, (8), 1876-1886, (2004)
   

WELL

Ulbricht M, Membrane separations using molecularly imprinted polymers.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 113-125, (2004)
   

WELL

Varma AJ et al., Metal complexation by chitosan and its derivatives: a review.
Carbohydrate Polymers, 55, (1), 77-93, (2004)
   

WELL

Wu LQ et al., Study on the recognition of templates and their analogues on molecularly imprinted polymer using computational and conformational analysis approaches.
Journal of Molecular Recognition, 17, (6), 567-574, (2004)
   

WELL

Yan C et al., Capillary electrochromatography: Advances in instrumentation and stationary phases.
Abstracts of Papers of the American Chemical Society, 227, (ANYL), 254-254, (2004)
   

WELL

Zhou YX et al., Potentiometric sensor for dipicolinic acid.
Abstracts of Papers of the American Chemical Society, 228, (ANYL), 054-054, (2004)
   

WELL-DEFINED GLYCOPOLYMER

Cunliffe D et al., Synthetic and biological polymers - merging the interface.
European Polymer Journal, 40, (1), 5-25, (2004)
   

96 Well micro-plate

Yu JH et al., Highly selective molecular recognition and high throughput detection of melamine based on molecularly imprinted sol-gel film.
Analytica Chimica Acta, 651, (2), 209-214, (2009)
   

96-well microplate

Li YX et al., Trypsin electrochemical sensing using two-dimensional molecularly imprinted polymers on 96-well microplates.
Biosensors and Bioelectronics, 119, 18-24, (2018)
   

Well water

Mohammadi V et al., Direct molecular imprinting technique to synthesize coated electrospun nanofibers for selective solid-phase microextraction of chlorpyrifos.
Microchimica Acta, 186, (8), Article524-(2019)
   

Wet phase inversion

Florea AM et al., An innovative approach to prepare hypericin molecularly imprinted pearls using a "phyto-template".
Talanta, 148, 37-45, (2016)
   

Wet phase inversion

Florea AM et al., Evaluation of molecularly imprinted polymer pearls for selective isolation of hypericins.
Revista De Materiale Plastice, 54, (3), 495-501, (2017)
   

Wet phase inversion

Yang Q et al., Simultaneous phase-inversion and imprinting based sensor for highly sensitive and selective detection of bisphenol A.
Talanta, 176, 595-603, (2018)
   

wet-phase inversion

Gavrila AM et al., Molecularly Imprinted Polymer Pearls Obtained by Phase Inversion for the Selective Recognition of Hypericin.
Materiale Plastice, 56, (2), 315-320, (2019)
   

wet phase inversion method

Park JK et al., Separation of phenylalanine by ultrafiltration using D-Phe imprinted polyacrylonitrile-poly(acrylic acid)-poly(acryl amide) terpolymer membrane.
Korean Journal of Chemical Engineering, 21, (5), 994-998, (2004)
   

wet-phase inversion method

Park JK et al., Characteristics of selective adsorption using D-Phenylalanine imprinted terpolymer beads.
Korean Journal of Chemical Engineering, 22, (6), 927-931, (2005)
   

wet phase-inversion method

Li JX et al., Preparation and characterization of molecularly imprinted CA/PVDF blend membrane specific for reactive brilliant blue KN-R.
Membrane Science and Technology, 29, (1), 8-12, (2009)
   

wet phase inversion method

Ingole PG et al., Enantiomeric separation of α-amino acids by imprinted terpolymer membrane.
Arabian Journal of Chemistry, 9, (Supplement 2), S960-S965, (2016)
   

wettability

Zhang JJ et al., Electrochemically Triggered Au Nanoparticles ’Sponges’ for the Controlled Uptake and Release of a Photoisomerizable Dithienylethene Guest Substrate.
ACS Nano, 5, (7), 5936-5944, (2011)
   

wettability

Nicoletta FP et al., Light Responsive Polymer Membranes: A Review.
Membranes, 2, (1), 134-197, (2012)
   

Wettability differences enrichment model

Sai N et al., A novel enrichment imprinted crystalline colloidal array for the ultratrace detection of chloramphenicol.
Talanta, 161, 1-7, (2016)
   

Whatman paper

Akbulut Y et al., A molecularly imprinted whatman paper for clinical detection of propranolol.
Sensors and Actuators B: Chemical, 304, Article127276-(2020)
   

Wheat

Liang T et al., Metal Organic Framework-Molecularly Imprinted Polymer as Adsorbent in Matrix Solid Phase Dispersion for Pyrethroids Residue Extraction from Wheat.
Food Analytical Methods, 12, (1), 217-228, (2019)
   

Wheat

Shi JR et al., Surface-imprinted β-cyclodextrin-functionalized carbon nitride nanosheets for fluorometric determination of sterigmatocystin.
Microchimica Acta, 186, (12), Article808-(2019)
   

Wheat

Zhang Y et al., Magnetic hyperbranched molecularly imprinted polymers for selective enrichment and determination of zearalenone in wheat proceeded by HPLC-DAD analysis.
Talanta, 209, Article120555-(2020)
   

wheat extracts

Zhou SN et al., Analysis of wheat extracts for ochratoxin A by molecularly imprinted solid-phase extraction and pulsed elution.
Analytical and Bioanalytical Chemistry, 378, (8), 1903-1906, (2004)
   

Wheat flour

Khajeh M et al., Development of a Selective Molecularly Imprinted Polymer-Based Solid-Phase Extraction for Copper from Food Samples.
Biological Trace Element Research, 135, (1), 325-333, (2010)
   

Wheat flour

Capoferri D et al., MIP-MEPS based sensing strategy for the selective assay of dimethoate. Application to wheat flour samples.
Talanta, 174, 599-604, (2017)
   

Wheat germ agglutinin

Liu JM et al., A highly selective affinity adsorption imprinting phosphorescence sensor for determination of trace alkaline phosphatase and prediction of human diseases.
Sensors and Actuators B: Chemical, 186, 521-527, (2013)
   

Wheat germ agglutinin lectin

Wangchareansak T et al., Surface molecular imprints of WGA lectin as artificial receptors for mass-sensitive binding studies.
Analytical and Bioanalytical Chemistry, 400, (8), 2499-2506, (2011)
   

Wheat samples

Vidal JC et al., Molecularly Imprinted On-Line Solid-Phase Extraction Coupled with Fluorescence Detection for the Determination of Ochratoxin A in Wheat Samples.
Analytical Letters, 45, (1), 51-62, (2012)
   

Wheat samples

Wang RY et al., Selective recognition and enrichment of sterigmatocystin in wheat by thermo-responsive imprinted polymer based on magnetic halloysite nanotubes.
Journal of Chromatography A, 1619, Article460952-(2020)
   

whey proteins

Proceeding, Méndez-Palacios I et al, Development of a Molecularly Imprinted Polymer (MIP) for the Recovery of Lactoferrin, 

1309-1313, (2006)
   

whey proteins

Jiménez-Guzmán J et al., Development of a molecularly imprinted polymer for the recovery of lactoferrin.
Food and Bioproducts Processing, 92, (2), 226-232, (2014)
   

Whispering Gallery Mode optical microresonators

Hammond GD et al., Integrating Nanostructured Artificial Receptors with Whispering Gallery Mode Optical Microresonators via Inorganic Molecular Imprinting Techniques.
Biosensors, 6, (2), ArticleNo26-(2016)
   

WHO

Saini SS et al., Molecularly Imprinted Polymers for the Detection of Food Toxins: A Minireview.
Advances in Nanoparticles, 2, (1), 60-65, (2013)
   

WHO

Ahmad I et al., Synthesis and characterization of molecular imprinted nanomaterials for the removal of heavy metals from water.
Journal of Materials Research and Technology, 7, (3), 270-282, (2018)
   

WHO

Ahmad I et al., Synthesis and characterization of molecularly imprinted ferrite (SiO2@Fe2O3) nanomaterials for the removal of nickel (Ni2+ ions) from aqueous solution.
Journal of Materials Research and Technology, 8, (1), 1400-1411, (2019)
   

Whole-bacteria detection

Templier V et al., Ligands for label-free detection of whole bacteria on biosensors: A review.
TrAC Trends in Analytical Chemistry, 79, 71-79, (2016)
   

whole blood

Murakami T et al., Molecularly imprinted polymer solid-phase extraction of synthetic cathinones from urine and whole blood samples.
Journal of Separation Science, 41, (24), 4506-4514, (2018)
   

whole cell

Shan XL et al., Binding Constant of the Cell-shaped Cavity Formed on a Polymer for Escherichia coli O157.
Analytical Sciences, 34, (4), 483-486, (2018)
   

Whole-cell imprinted polymers

Golabi M et al., Electrochemical bacterial detection using poly(3-aminophenylboronic acid)-based imprinted polymer.
Biosensors and Bioelectronics, 93, 87-93, (2017)
   

whole cell imprinting

Cohen T et al., Whole Cell Imprinting in Sol-Gel Thin Films for Bacterial Recognition in Liquids: Macromolecular Fingerprinting.
International Journal of Molecular Sciences, 11, (4), 1236-1252, (2010)
   

Whole human blood

Szultka M et al., Simultaneous determination of selected chemotherapeutics in human whole blood by molecularly imprinted polymers coated solid phase microextraction fibers and liquid chromatography-tandem mass spectrometry.
Journal of Chromatography B, 940, 66-76, (2013)
   

Wild edible bolete

Xie ZH et al., Magnetic Molecularly Imprinted Polymer Combined with High-Performance Liquid Chromatography for the Selective Separation and Determination of Glutathione in Various Wild Edible Boletes.
Food Analytical Methods, 12, (12), 2908-2919, (2019)
   

wildlife eggs

Blasco C et al., Development of an Improved Method for Trace Analysis of Quinolones in Eggs of Laying Hens and Wildlife Species Using Molecularly Imprinted Polymers.
Journal of Agricultural and Food Chemistry, 60, (44), 11005-11014, (2012)
   

WILKINSON CATALYST

Tada M et al., Performance and kinetic behavior of a new SiO2-attached molecular-imprinting Rh-dimer catalyst in size- and shape-selective hydrogenation of alkenes.
Journal of Catalysis, 211, (2), 496-510, (2002)
   

WILKINSON CATALYST

Tada M et al., Novel SiO2-attached molecular-imprinting Rh-monomer catalysts for shape-selective hydrogenation of alkenes; preparation, characterization and performance.
Physical Chemistry Chemical Physics, 4, (18), 4561-4574, (2002)
   

wine

Proceeding, Snowden EM et al, The removal of mousy off-flavour from wine using molecular imprint technology, 
Blair RJ, Williams PJ, Pretorius IS (Eds.), 
301-302, (2004)
   

wine

Dakova I et al., Non-chromatographic mercury speciation and determination in wine by new core-shell ion-imprinted sorbents.
Journal of Hazardous Materials, 231-232, 49-56, (2012)
   

wine

Euterpio MA et al., Development and Validation of a Method for the Determination of (E)-Resveratrol and Related Phenolic Compounds in Beverages Using Molecularly Imprinted Solid Phase Extraction.
Journal of Agricultural and Food Chemistry, 61, (8), 1640-1645, (2012)
   

wine

Basozabal I et al., Rational design and chromatographic evaluation of histamine imprinted polymers optimised for solid-phase extraction of wine samples.
Journal of Chromatography A, 1308, 45-51, (2013)
   

wine

Prelle A et al., Comparison of Clean-Up Methods for Ochratoxin A on Wine, Beer, Roasted Coffee and Chili Commercialized in Italy.
Toxins, 5, (10), 1827-1844, (2013)
   

wine

Puzio K et al., Combination of computational methods, adsorption isotherms and selectivity tests for the conception of a mixed non-covalent-semi-covalent molecularly imprinted polymer of vanillin.
Analytica Chimica Acta, 790, 47-55, (2013)
   

wine

Bitar M et al., Experimental design approach in the synthesis of molecularly imprinted polymers specific for iprodione fungicide.
Reactive and Functional Polymers, 94, 17-24, (2015)
   

wine

Garcia D et al., Molecularly imprinted polymers as a tool for the study of the 4-ethylphenol metabolic pathway in red wines.
Journal of Chromatography A, 1410, 164-172, (2015)
   

wine

Teixeira R et al., Volatile phenols depletion in red wine using molecular imprinted polymers.
Journal of Food Science and Technology, 52, (12), 7735-7746, (2015)
   

wine

Barciela-Alonso MC et al., Solid phase extraction using molecular imprinted polymers for phthalate determination in water and wine samples by HPLC-ESI-MS.
Microchemical Journal, 132, 233-237, (2017)
   

wine

Bou-Maroun E et al., Feasibility of a microwave liquid sensor based on molecularly imprinted sol-gel polymer for the detection of iprodione fungicide.
Sensors and Actuators B: Chemical, 244, 24-30, (2017)
   

wine

Bueno-Hernández D et al., Low cost optical device for detection of fluorescence from Ochratoxin A using a CMOS sensor.
Sensors and Actuators B: Chemical, 246, 606-614, (2017)
   

wine

Guerreiro JRL et al., A saliva molecular imprinted localized surface plasmon resonance biosensor for wine astringency estimation.
Food Chemistry, 233, 457-466, (2017)
   

wine

Mitreva M et al., Iron(II) ion imprinted polymer for Fe(II)/Fe(III) speciation in wine.
Microchemical Journal, 132, 238-244, (2017)
   

wine

Hu MH et al., Polydopamine-based molecularly imprinting polymers on magnetic nanoparticles for recognition and enrichment of ochratoxins prior to their determination by HPLC.
Microchimica Acta, 185, (6), 300-(2018)
   

wine

Bitar M et al., Molecularly imprinted sol-gel polymers for the analysis of iprodione fungicide in wine: Synthesis in green solvent.
Food Chemistry, 293, 226-232, (2019)
   

wine

Domínguez-Renedo O et al., Molecularly imprinted polypyrrole based electrochemical sensor for selective determination of 4-ethylphenol.
Talanta, 207, Article120351-(2020)
   

wine analysis

Molinelli A et al., Advanced solid phase extraction using molecularly imprinted polymers for the determination of quercetin in red wine.
Journal of Agricultural and Food Chemistry, 50, (7), 1804-1808, (2002)
   

wine analysis

Weiss R et al., Molecular imprinting and solid phase extraction of flavonoid compounds.
Bioseparation, 10, (6), 379-387, (2002)
   

wine analysis

Baggiani C et al., Molecularly imprinted solid-phase extraction method for the high-performance liquid chromatographic analysis of fungicide pyrimethanil in wine.
Journal of Chromatography A, 1141, (2), 158-164, (2007)
   

wine analysis

Quintana MC et al., Sample preparation for the determination of chlorophenols.
TrAC Trends in Analytical Chemistry, 27, (5), 418-436, (2008)
   

wine analysis

Baggiani C et al., Molecularly imprinted polymer/cryogel composites for solid-phase extraction of bisphenol A from river water and wine.
Analytical and Bioanalytical Chemistry, 397, (2), 815-822, (2010)
   

wine analysis

Giovannoli C et al., Determination of Ochratoxin A in Italian Red Wines by Molecularly Imprinted Solid Phase Extraction and HPLC Analysis.
Journal of Agricultural and Food Chemistry, 62, (22), 5220-5225, (2014)
   

wine flavour

Liang C et al., Preparation of Magnetic Polymers for the Elimination of 3-Isobutyl-2-Methoxypyrazine from Wine.
Molecules, 23, (5), ArticleNo1140-(2018)
   

Wine samples

Chen FF et al., Preparation of magnetic molecularly imprinted polymer for selective recognition of resveratrol in wine.
Journal of Chromatography A, 1300, 112-118, (2013)
   

Wine samples

Hrobonová K et al., Comparison of different types of sorbents for extraction of coumarins.
Food Chemistry, 332, Article127404-(2020)
   

winter jujube

Li F et al., Hydrophilic molecularly imprinted polymers functionalized magnetic carbon nanotubes for selective extraction of cyclic adenosine monophosphate from winter jujube.
Journal of Separation Science, 44, (10), 2131-2142, (2021)
   

wireless

Tsow F et al., A Wearable and Wireless Sensor System for Real-Time Monitoring of Toxic Environmental Volatile Organic Compounds.
IEEE Sensors Journal, 9, (12), 1734-1740, (2009)
   

Wireless and wearable integrated sensor

Chen C et al., A new sensor for the assessment of personal exposure to volatile organic compounds.
Atmospheric Environment, 54, (1), 679-687, (2012)
   

wireless sensors

Chen C et al., A Wireless Hybrid Chemical Sensor for Detection of Environmental Volatile Organic Compounds.
IEEE Sensors Journal, 13, (5), 1748-1755, (2013)
   

wireless sensors

Croux D et al., Molecular imprinted polymer films on RFID tags: a first step towards disposable packaging sensors.
physica status solidi (a), 210, (5), 938-944, (2013)
   

Without redox probe

Trevizan HF et al., Development of a molecularly imprinted polymer for uric acid sensing based on a conductive azopolymer: Unusual approaches using electrochemical impedance/capacitance spectroscopy without a soluble redox probe.
Sensors and Actuators B: Chemical, 343, Article130141-(2021)
   

wogonin

Yang QQ et al., Preparation of baicalein molecularly imprinted monolithic columns.
Chinese Journal of Pharmaceutical Analysis, 31, (1), 1-5, (2011)
   

Wolfberry

Su ZH et al., Molecularly imprinted solid-phase extraction monolithic capillary column for selective extraction and sensitive determination of safranine T in wolfberry.
Analytical and Bioanalytical Chemistry, 406, (5), 1551-1556, (2014)
   

Wollastonite

Meng MJ et al., Highly efficient adsorption of salicylic acid from aqueous solution by wollastonite-based imprinted adsorbent: A fixed-bed column study.
Chemical Engineering Journal, 225, 331-339, (2013)
   

Working electrode

Gao C et al., Voltammetric determination of mercury(II).
TrAC Trends in Analytical Chemistry, 51, 1-12, (2013)
   

working mechanisms

Li RF et al., Advances in Molecularly Imprinting Technology for Bioanalytical Applications.
Sensors, 19, (1), ArticleNo177-(2019)
   

Wound dressing

Kurczewska J et al., Molecularly imprinted polymer as drug delivery carrier in alginate dressing.
Materials Letters, 201, 46-49, (2017)
   

Wound healing agents

Tsermentseli SK et al., Molecularly imprinted polymers for the isolation of bioactive naphthoquinones from plant extracts.
Journal of Chromatography A, 1315, 15-20, (2013)
   

Wrinkled silica nanoparticles

Chao JL et al., Molecularly imprinted polymer-capped wrinkled silica-quantum dot hybrid particles for fluorescent determination of tetra bromo bisphenol A.
Microchimica Acta, 188, (4), Article126-(2021)
   

top