IAC

Bueno-Hernández D et al., Low cost optical device for detection of fluorescence from Ochratoxin A using a CMOS sensor.
Sensors and Actuators B: Chemical, 246, 606-614, (2017)
   

ibuprofen

Kempe M et al., Direct resolution of naproxen on a noncovalently molecularly imprinted chiral stationary-phase.
Journal of Chromatography A, 664, (2), 276-279, (1994)
   

ibuprofen

Haginaka J et al., Uniform-sized molecularly imprinted polymer for (S)-ibuprofen - Retention properties in aqueous mobile phases.
Journal of Chromatography A, 857, (1-2), 117-125, (1999)
   

ibuprofen

Suedee R et al., Enantioselective release of controlled delivery granules based on molecularly imprinted polymers.
Drug Delivery, 9, (1), 19-30, (2002)
   

ibuprofen

Chmurski K et al., Measurement of ibuprofen binding to mixed monolayers containing b-cyclodextrin active sites.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 49, (1-2), 187-191, (2004)
   

ibuprofen

Caro E et al., Selective enrichment of anti-inflammatory drugs from river water samples by solid-phase extraction with a molecularly imprinted polymer.
Journal of Separation Science, 28, (16), 2080-2085, (2005)
   

ibuprofen

Jin YZ et al., Adsorption isotherm of ibuprofen on molecular imprinted polymer.
Korean Journal of Chemical Engineering, 22, (2), 264-267, (2005)
   

ibuprofen

Deng QL et al., S-Ibuprofen-imprinted polymers incorporating γ-methacryloxypropyl-trimethoxysilane for CEC separation of ibuprofen enantiomers.
Electrophoresis, 27, (21), 4351-4358, (2006)
   

ibuprofen

Hung CY et al., Synthesis and molecular recognition of molecularly imprinted polymer with ibuprofen as template.
Journal of the Chinese Chemical Society, 53, (5), 1173-1180, (2006)
   

ibuprofen

Farrington K et al., Investigation of the nature of MIP recognition: The development and characterisation of a MIP for Ibuprofen.
Biosensors and Bioelectronics, 22, (6), 1138-1146, (2007)
   

ibuprofen

Farrington K et al., Molecularly imprinted sol gel for ibuprofen: An analytical study of the factors influencing selectivity.
Talanta, 78, (3), 653-659, (2009)
   

ibuprofen

Spégel P et al., Novel Vinylpyridine Based Cationic MIP Monoliths for Enantiomer Separation in CEC.
Chromatographia, 69, (3), 277-285, (2009)
   

ibuprofen

Kochkodan V et al., Selective recognition of organic pollutants in aqueous solutions with composite imprinted membranes.
Advances in Colloid and Interface Science, 159, (2), 180-188, (2010)
   

ibuprofen

Lago MA et al., Ionic and Polyampholyte N-Isopropylacrylamide-Based Hydrogels Prepared in the Presence of Imprinting Ligands: Stimuli-Responsiveness and Adsorption/Release Properties.
Journal of Functional Biomaterials, 2, (4), 373-390, (2011)
   

ibuprofen

Tang Q et al., Photoregulated uptake and release of drug by an organic-inorganic hybrid sol-gel material.
Journal of Sol-Gel Science and Technology, 59, (3), 495-504, (2011)
   

ibuprofen

Liu LJ et al., Preparation and chiral resolution performance of S-ibuprofen molecularly imprinted membranes.
Polymer Materials Science and Engineering, 28, (12), 159-163, (2012)
   

ibuprofen

Ban L et al., Preparation and characterization of an imprinted monolith by atom transfer radical polymerization assisted by crowding agents.
Analytical and Bioanalytical Chemistry, 405, (7), 2245-2253, (2013)
   

ibuprofen

Li CE et al., Silica particles coated with azobenzene-containing photoresponsive molecule-imprinted skin layer.
Colloid & Polymer Science, 291, (9), 2049-2059, (2013)
   

ibuprofen

Zhou L et al., Preparation and characterization of molecularly imprinted organic-inorganic hybrid materials by sol-gel processing for selective recognition of ibuprofen.
Journal of Sol-Gel Science and Technology, 66, (1), 59-67, (2013)
   

ibuprofen

Eslami MR et al., A dual usage smart sorbent/recognition element based on nanostructured conducting molecularly imprinted polypyrrole for simultaneous potential-induced nanoextraction/determination of ibuprofen in biomedical samples by quartz crystal microbalance sensor.
Sensors and Actuators B: Chemical, 220, 880-887, (2015)
   

ibuprofen

Guo C et al., Preparation of ibuprofen’s metal-complexing imprinted polymer membrane via radiation polymerization.
Journal of Functional Materials, 46, (14), 14134-14139, (2015)
   

ibuprofen

Guo C et al., Preparation of Thermosensitive Hollow Imprinted Microspheres via Combining Distillation Precipitation Polymerization and Thiol-ene Click Chemistry.
Chinese Journal of Chemistry, 33, (2), 225-234, (2015)
   

ibuprofen

Al-Bayati YK et al., Synthesis of Ibuprofen-Molecularly Imprinted Polymers Used as Sensors to Determine Drug in Pharmaceutical Preparation.
Asian Journal of Chemistry, 28, (6), 1376-1380, (2016)
   

ibuprofen

Concu R et al., Molecular Dynamics Simulation Study of the Selectivity of a Silica Polymer for Ibuprofen.
International Journal of Molecular Sciences, 17, (7), ArticleNo1083-(2016)
   

ibuprofen

Madikizela LM et al., Experimental and theoretical study of molecular interactions between 2-vinyl pyridine and acidic pharmaceuticals used as multi-template molecules in molecularly imprinted polymer.
Reactive and Functional Polymers, 103, 33-43, (2016)
   

ibuprofen

Dai WG et al., Selective Photoelectrochemical Oxidation of Chiral Ibuprofen Enantiomers.
Acta Physico-Chimica Sinica, 33, (5), 960-967, (2017)
   

ibuprofen

Madikizela LM et al., Occurrence of naproxen, ibuprofen, and diclofenac residues in wastewater and river water of KwaZulu-Natal Province in South Africa.
Environmental Monitoring and Assessment, 189, (7), ArticleNo348-(2017)
   

ibuprofen

Wu XL et al., Bioinspired synthesis of pDA@GO-based molecularly imprinted nanocomposite membranes assembled with dendrites-like Ag microspheres for high-selective adsorption and separation of ibuprofen.
Journal of Membrane Science, 553, 151-162, (2018)
   

ibuprofen

Wu XL et al., Accelerating the design of molecularly imprinted nanocomposite membranes modified by Au@polyaniline for selective enrichment and separation of ibuprofen.
Applied Surface Science, 428, 555-565, (2018)
   

IC50

Becskereki G et al., The Selectivity of Immunoassays and of Biomimetic Binding Assays with Imprinted Polymers.
International Journal of Molecular Sciences, 22, (19), ArticleNo10552-(2021)
   

icariin

Jia XH et al., Design, preparation, surface recognition properties, and characteristics of icariin molecularly imprinted polymers.
Cogent Chemistry, 1, (1), 1059597-(2015)
   

ICP-AES

Birlik E et al., Selective separation of thorium using ion imprinted chitosan-phthalate particles via solid phase extraction.
Separation Science and Technology, 41, (14), 3109-3121, (2006)
   

ICP-AES

Kala R et al., Ion imprinted polymer particles for separation of yttrium from selected lanthanides.
Journal of Separation Science, 29, (9), 1281-1287, (2006)
   

ICP-AES

Chang XJ et al., Solid-phase extraction of iron(III) with an ion-imprinted functionalized silica gel sorbent prepared by a surface imprinting technique.
Talanta, 71, (1), 38-43, (2007)
   

ICP-AES

Özkütük EB et al., Fe3+-Imprinted Polymeric Systems.
Hacettepe Journal of Biology and Chemistry, 35, (3), 195-202, (2007)
   

ICP-AES

Zheng H et al., Highly selective determination of palladium(II) after preconcentration using Pd(II)-imprinted functionalized silica gel sorbent prepared by a surface imprinting technique.
Microchimica Acta, 157, (1), 7-11, (2007)
   

ICP-AES

Chang XJ et al., Silica gel surface-imprinted solid-phase extraction of Zr(IV) from aqueous solutions.
Microchimica Acta, 162, (1), 113-119, (2008)
   

ICP-AES

He Q et al., Determination of chromium(III) and total chromium in natural waters using a surface ion-imprinted silica gel as selective adsorbent.
International Journal of Environmental Analytical Chemistry, 88, (6), 373-384, (2008)
   

ICP-AES

Fasihi J et al., Adsorption of uranyl ion onto an anthraquinone based ion-imprinted copolymer.
Reactive and Functional Polymers, 71, (8), 803-808, (2011)
   

ICP-AES

Zheng H et al., Highly selective determination of rhodium(III) using silica gel surface-imprinted solid-phase extraction.
International Journal of Environmental Analytical Chemistry, 91, (11), 1013-1023, (2011)
   

ICP-AES

Zhu SS et al., Organotin Compounds Chromatographic Detection Methods Based on Molecular Imprinting Technique.
Journal of Ningbo University (Natural Science and Engineering Edition), 25, (3), 97-100, (2012)
   

ICP-AES determination

Xue QH, Preparation of Pd(II)-Imprinted Polymer and Study on Its Property of Separation and Enrichment of Palladium(II).
Physical Testing and Chemical Analysis Part B: Chemical Analysis, 45, (7), 783-786, (2009)
   

ICP-MS

Zhang N et al., Chromium(III)-imprinted silica gel for speciation analysis of chromium in environmental water samples with ICP-MS detection.
Talanta, 75, (2), 536-543, (2008)
   

ICP-MS

Mishra S et al., Th(IV) ion-imprinted polymer for selective solid-phase extraction of Th(IV) and its analytical applications.
Desalination and Water Treatment, 56, (5), 1364-1371, (2015)
   

ICP-MS

Hua Y et al., Hybrid monolith assisted magnetic ion-imprinted polymer extraction coupled with ICP-MS for determination of trace Au(III) in environmental and mineral samples.
Microchemical Journal, 158, Article105210-(2020)
   

ICP-MS

Kisomi AS et al., Application of [mu]-TLC for speciation of inorganic arsenic by laser ablation inductively coupled plasma mass spectrometry.
Microchemical Journal, 159, Article105443-(2020)
   

ICP-MS

Fei JJ et al., Preparation of a novel amino functionalized ion-imprinted hybrid monolithic column for the selective extraction of trace copper followed by ICP-MS detection.
Analytica Chimica Acta, 1162, Article338477-(2021)
   

ICP-OES

Fan ZF, Hg(II)-imprinted thiol-functionalized mesoporous sorbent micro-column preconcentration of trace mercury and determination by inductively coupled plasma optical emission spectrometry.
Talanta, 70, (5), 1164-1169, (2006)
   

ICP-OES

He Q et al., Preconcentration and separation of Zn2+ using surface zinc(II) imprinted functionalized silica gel sorbent.
Chemia Analityczna, 51, (5), 715-725, (2006)
   

ICP-OES

Zheng H et al., Selective Solid-phase Extraction of Hg(II) Using Silica Gel Surface - Imprinting Technique.
Chemia Analityczna, 53, (5), 673-687, (2008)
   

ICP-OES

Zhu XB et al., Selective solid-phase extraction of lead(II) from biological and natural water samples using surface-grafted lead(II)-imprinted polymers.
Microchimica Acta, 164, (1), 125-132, (2009)
   

identification

Berglund J et al., Selection of phage display combinatorial library peptides with affinity for a yohimbine imprinted methacrylate polymer.
Analytical Communications, 35, (1), 3-7, (1998)
   

identification

de Boer T et al., Selectivity in capillary electrokinetic separations.
Electrophoresis, 20, (15-16), 2989-3010, (1999)
   

identification

Heegaard NHH et al., Identification, quantitation, and characterization of biomolecules by capillary electrophoretic analysis of binding interactions.
Electrophoresis, 20, (15-16), 3122-3133, (1999)
   

identification

Brambilla G et al., Use of molecularly imprinted polymers in the solid-phase extraction of clenbuterol from animal feeds and biological matrices.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 759, (1), 27-32, (2001)
   

identification

Frandsen H et al., 2-amino-1-methyl-6-(5-hydroxy-)phenylimidazo[4,5-b]pyridine (5-OH-PhIP), a biomarker for the genotoxic dose of the heterocyclic amine, 2-amino-1-methyl-6-phenylimidazo[4,5-b]pyridine (PhIP).
Food and Chemical Toxicology, 40, (8), 1125-1130, (2002)
   

identification

Xie JC et al., Affinitive separation and on-line identification of antitumor components from Peganum nigellastrum by coupling a chromatographic column of target analogue imprinted polymer with mass spectrometry.
Analytical Chemistry, 74, (10), 2352-2360, (2002)
   

identification

van Hout MWJ et al., Ion suppression in the determination of clenbuterol in urine by solid-phase extraction atmospheric pressure chemical ionisation ion-trap mass spectrometry.
Rapid Communications In Mass Spectrometry, 17, (3), 245-250, (2003)
   

identification

Greene NT et al., Molecular imprinted sensor arrays coupled with PCA and LDA in the identification of unknowns.
Abstracts of Papers of the American Chemical Society, 227, (POLY), 505-505, (2004)
   

identification

Guiochon GA et al., Progress and future of instrumental analytical chemistry applied to the environment.
Analytica Chimica Acta, 524, (1-2), 1-14, (2004)
   

identification

Naczk M et al., Extraction and analysis of phenolics in food.
Journal of Chromatography A, 1054, (1-2), 95-111, (2004)
   

identification

Navarro-Villoslada F et al., Application of multivariate analysis to the screening of molecularly imprinted polymers for bisphenol A.
Analytica Chimica Acta, 504, (1), 149-162, (2004)
   

identification

Widstrand C et al., Evaluation of MISPE for the multi-residue extraction of b-agonists from calves urine.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 85-91, (2004)
   

identification

Jia MF et al., Molecular imprinting technology for microorganism analysis.
TrAC Trends in Analytical Chemistry, 106, 190-201, (2018)
   

Identifying

Lang L et al., Synthesis of molecular imprinted polymers for methyl dopa with different functional monomers.
West China Journal of Pharmaceutical Sciences, 20, (3), 202-204, (2005)
   

identifying selectivity of identification

Pu JZ, Synthesis and Characterization of Molecularly Imprinted Polymer of Desloratadine.
Journal of Mathematical Medicine, 22, (4), 437-440, (2009)
   

IDEs

Gennaro A et al., Cell detection by surface imprinted polymers (SIPs) - A study of the sensor surface by optical and dielectric relaxation spectroscopy.
IEEE Transactions on Dielectrics and Electrical Insulation, 25, (3), 816-821, (2018)
   

IEC-MS

Claude B et al., Preliminary recovery study of a commercial molecularly imprinted polymer for the extraction of glyphosate and AMPA in different environmental waters using MS.
Environmental Science and Pollution Research, 24, (13), 12293-12300, (2017)
   

IED

Mamo SK et al., Development of a Molecularly Imprinted Polymer-Based Sensor for the Electrochemical Determination of Triacetone Triperoxide (TATP).
Sensors, 14, (12), 23269-23282, (2014)
   

Ifosfamide

Prasad BB et al., Synthesis of novel monomeric graphene quantum dots and corresponding nanocomposite with molecularly imprinted polymer for electrochemical detection of an anticancerous ifosfamide drug.
Biosensors and Bioelectronics, 94, 1-9, (2017)
   

IgG

Tretjakov A et al., Surface molecularly imprinted polydopamine films for recognition of immunoglobulin G.
Microchimica Acta, 180, (15-16), 1433-1442, (2013)
   

IgG

Çulha S et al., Synthesis of l-lysine imprinted cryogels for immunoglobulin G adsorption.
Materials Science and Engineering: C, 52, 315-324, (2015)
   

IgG

Boroznjak R et al., A computational approach to study functional monomer-protein molecular interactions to optimize protein molecular imprinting.
Journal of Molecular Recognition, 30, (10), ArticleNoe2635-(2017)
   

IgG

Keçili R, Mannose Imprinted Affinity Cryogels for Immunoglobulin G Binding.
Hacettepe Journal of Biology and Chemistry, 47, (1), 7-15, (2019)
   

IgG-binding protein

Liu YS et al., Oriented immobilization of proteins on solid supports for use in biosensors and biochips: a review.
Microchimica Acta, 183, (1), 1-19, (2016)
   

IgG purification

Perçin I et al., Molecularly imprinted poly(N-isopropylacrylamide) thermosensitive based cryogel for immunoglobulin G purification.
Process Biochemistry, 80, 181-189, (2019)
   

IgG recognition

Asliyuce S et al., Immunoglobulin G recognition with Fab fragments imprinted monolithic cryogels: Evaluation of the effects of metal-ion assisted-coordination of template molecule.
Reactive and Functional Polymers, 73, (6), 813-820, (2013)
   

II COMPLEXES

Becker JJ et al., Imprinting chiral information into rigidified dendrimers.
Organometallics, 22, (24), 4984-4998, (2003)
   

IIP

Özkütük EB et al., Preconcentration of phosphate ion onto ion-imprinted polymer.
Journal of Hazardous Materials, 157, (1), 130-136, (2008)
   

IIP

Proceeding, Maebayashi H et al, Synthesis of 4-Hydroxy-2-pyrone Derivatives and Application to Ion Imprinting Polymers, 

(2009)
   

IIP

Cankara S et al., Biopolymer based ion imprinting cryogel traps for the removal of Tl(I).
Separation Science and Technology, 51, (6), 901-908, (2016)
   

IIP

Jalilzadeh M et al., Removal of Cu(II) ions from water by ion-imprinted magnetic and non-magnetic cryogels: A comparison of their selective Cu(II) removal performances.
Journal of Water Process Engineering, 13, 143-152, (2016)
   

IIP

Ghanei-Motlagh M et al., Magnetic silver(I) ion-imprinted polymeric nanoparticles on a carbon paste electrode for voltammetric determination of silver(I).
Microchimica Acta, 184, (6), 1691-1699, (2017)
   

IIP

Roushani M et al., Preparation an electrochemical sensor for detection of manganese (II) ions using glassy carbon electrode modified with multi walled carbon nanotube-chitosan-ionic liquid nanocomposite decorated with ion imprinted polymer.
Journal of Electroanalytical Chemistry, 804, 1-6, (2017)
   

IIP

Rais S et al., Preparation of a new magnetic ion-imprinted polymer and optimization using Box-Behnken design for selective removal and determination of Cu(II) in food and wastewater samples.
Food Chemistry, 334, Article127563-(2021)
   

IIP after extraction

Aloui N et al., Novel Approach for Modeling an Ionic Imprinted Polymer Based SAW Sensor with COMSOL Multiphysics.
Proceedings, 2, (13), ArticleNo975-(2018)
   

IIP before extraction

Aloui N et al., Novel Approach for Modeling an Ionic Imprinted Polymer Based SAW Sensor with COMSOL Multiphysics.
Proceedings, 2, (13), ArticleNo975-(2018)
   

IIP IECS-GLA

Ahamed MEH et al., Selective extraction of gold(III) from metal chloride mixtures using ethylenediamine N-(2-(1-imidazolyl)ethyl) chitosan ion-imprinted polymer.
Hydrometallurgy, 140, 1-13, (2013)
   

IIP Membrane particle

Proceeding, Djunaidi MC et al, Selective transport of Fe(III) using ionic imprinted polymer (IIP) membrane particle, 
In: AIP Conference Proceedings, 
ArticleNo060001, (2015)
   

IIP-modified carbon paste electrode

Shamsipur M et al., Silver ion imprinted polymer nanobeads based on a aza-thioether crown containing a 1,10-phenanthroline subunit for solid phase extraction and for voltammetric and potentiometric silver sensors.
Analytica Chimica Acta, 852, 223-235, (2014)
   

IIP-modified graphite electrode

Ardalani M et al., A new generation of highly sensitive potentiometric sensors based on ion imprinted polymeric nanoparticles/multiwall carbon nanotubes/polyaniline/graphite electrode for sub-nanomolar detection of lead(II) ions.
Journal of Electroanalytical Chemistry, 879, Article114788-(2020)
   

IIP-RAM

Suquila FAC et al., Restricted access copper imprinted poly(allylthiourea): The role of hydroxyethyl methacrylate (HEMA) and bovine serum albumin (BSA) on the sorptive performance of imprinted polymer.
Chemical Engineering Journal, 350, 714-728, (2018)
   

IIP-RAM

Suquila FAC et al., Performance of restricted access copper-imprinted poly(allylthiourea) in an on-line preconcentration and sample clean-up FIA-FAAS system for copper determination in milk samples.
Talanta, 202, 460-468, (2019)
   

IIP-RAM

de Oliveira LLG et al., Restricted access material-ion imprinted polymer-based method for on-line flow preconcentration of Cd2+ prior to flame atomic absorption spectrometry determination.
Microchemical Journal, 157, Article105022-(2020)
   

IIPs

He JN et al., Synthesis and application of ion imprinting polymer coated magnetic multi-walled carbon nanotubes for selective adsorption of nickel ion.
Applied Surface Science, 428, 110-117, (2018)
   

II-VI semiconductor materials

Zakery M et al., A Novel Optosensor for Rapid Detection of Difenoconazole Using Molecularly Imprinted Polymers.
IEEE Sensors Journal, 18, (23), 9466-9470, (2018)
   

Ilex chinensis Sims

Li G et al., Selective extraction of 3,4-dihydroxybenzoic acid in Ilex chinensis Sims by meticulous mini-solid-phase microextraction using ternary deep eutectic solvent-based molecularly imprinted polymers.
Analytical and Bioanalytical Chemistry, 410, (30), 7849-7858, (2018)
   

Illegal additives

Liu ZG et al., Core-Shell Regeneration Magnetic Molecularly Imprinted Polymers-Based SERS for Sibutramine Rapid Detection.
ACS Sustainable Chemistry & Engineering, 7, (9), 8168-8175, (2019)
   

Illegal cooking oil

Liu ZG et al., Three-template magnetic molecular imprinted polymer for the rapid separation and specific recognition of illegal cooking oil markers.
Microchemical Journal, 157, Article105052-(2020)
   

Illicit drugs

González-Mariño I et al., Comparison of molecularly imprinted, mixed-mode and hydrophilic balance sorbents performance in the solid-phase extraction of amphetamine drugs from wastewater samples for liquid chromatography-tandem mass spectrometry determination.
Journal of Chromatography A, 1216, (48), 8435-8441, (2009)
   

Illicit drugs

Xiao DL et al., Molecularly imprinted polymers for the detection of illegal drugs and additives: a review.
Microchimica Acta, ArticleNo185, (4), 247-(2018)
   

IMAC adsorbent

Wu JM et al., Trypsin immobilization by direct adsorption on metal ion chelated macroporous chitosan-silica gel beads.
International Journal of Biological Macromolecules, 39, (4-5), 185-191, (2006)
   

imaging

Wang XP et al., Review: Advances and Applications of Surface Plasmon Resonance Biosensing Instrumentation.
Instrumentation Science & Technology, 41, (6), 574-607, (2013)
   

imaging

Huang HL et al., Multifunctional Magnetic Cellulose Surface-Imprinted Microspheres for Highly Selective Adsorption of Artesunate.
ACS Sustainable Chemistry & Engineering, 4, (6), 3334-3343, (2016)
   

imaging

van Rijn P et al., Viruses, Artificial Viruses and Virus-Based Structures for Biomedical Applications.
Advanced Healthcare Materials, 5, (12), 1386-1400, (2016)
   

imaging

Wan LB et al., Core-shell molecularly imprinted particles.
TrAC Trends in Analytical Chemistry, 95, 110-121, (2017)
   

imaging

Gui RJ et al., Recent advances in synthetic methods and applications of photo-luminescent molecularly imprinted polymers.
Journal of Photochemistry and Photobiology C: Photochemistry Reviews, 41, Article100315-(2019)
   

imaging

Jia C et al., Preparation of Dual-Template Epitope Imprinted Polymers for Targeted Fluorescence Imaging and Targeted Drug Delivery to Pancreatic Cancer BxPC-3 Cells.
ACS Applied Materials & Interfaces, 11, (35), 32431-32440, (2019)
   

imaging and drug delivery

Dosekova E et al., Nanotechnology in Glycomics: Applications in Diagnostics, Therapy, Imaging, and Separation Processes.
Medicinal Research Reviews, 37, (3), 514-626, (2017)
   

Imatinib mesylate

Zhou J et al., Study on preparation of imatinib mesylate-MIP and its selective recognition ability.
Chinese Pharmaceutical Journal, 46, (17), 1330-1333, (2011)
   

Imatinib mesylate

Kazemi A et al., Thermosensitive molecularly imprinted poly(1-vinyl-2-pyrrolidone/methyl methacrylate/N-vinylcaprolactam) for selective extraction of imatinib mesylate in human biological fluid.
Journal of Separation Science, 43, (3), 614-621, (2020)
   

Imazapic

Tarley CRT et al., Development of selective preconcentration/clean-up method for imidazolinone herbicides determination in natural water and rice samples by HPLC-PAD using an imazethapyr imprinted poly(vinylimidazole-TRIM).
Food Chemistry, 334, Article127345-(2021)
   

Imazapyr

Tarley CRT et al., Development of selective preconcentration/clean-up method for imidazolinone herbicides determination in natural water and rice samples by HPLC-PAD using an imazethapyr imprinted poly(vinylimidazole-TRIM).
Food Chemistry, 334, Article127345-(2021)
   

Imazethapyr

Chen Y et al., Molecularly imprinted polymer as a novel solid-phase microextraction coating for the selective enrichment of trace imidazolinones in rice, peanut, and soil.
Journal of Separation Science, 38, (2), 301-308, (2015)
   

Imidacloprid

Liang XY et al., Preparation of imidacloprid-imprinted polymer and its application as a solid phase extract.
Chinese Journal of Analysis Laboratory, 27, (5), 9-12, (2008)
   

Imidacloprid

Tang JS et al., Development and Application of Molecularly Imprinted Polymer as Solid Phase Extraction of Imidacloprid in Environmental Samples.
Journal of Liquid Chromatography & Related Technologies, 32, (1), 59-71, (2009)
   

Imidacloprid

Chen LG et al., Determination of imidacloprid in rice by molecularly imprinted-matrix solid-phase dispersion with liquid chromatography tandem mass spectrometry.
Journal of Chromatography B, 897, (1), 32-36, (2012)
   

Imidacloprid

Kong L et al., Molecularly imprinted sensor based on electropolmerized poly(o-phenylenediamine) membranes at reduced graphene oxide modified electrode for imidacloprid determination.
Sensors and Actuators B: Chemical, 185, 424-431, (2013)
   

Imidacloprid

Li L et al., Preparation and characterization of imidacloprid molecular imprinted polymers.
Food and Fermentation Industries, 39, (12), 79-84, (2013)
   

Imidacloprid

Wang X et al., Molecular imprinted photonic crystal hydrogels for the rapid and label-free detection of imidacloprid.
Food Chemistry, 141, (4), 3947-3953, (2013)
   

Imidacloprid

Yang DD et al., Determination of Three Neonicotinoid Pesticides Residues by High Performence Liquid Chromatography with Molecularly Imprinting Solid Phase Extraction.
Chinese Journal of Analytical Chemistry, 42, (6), 872-977, (2014)
   

Imidacloprid

Zhang M et al., Molecularly imprinted polymer on graphene surface for selective and sensitive electrochemical sensing imidacloprid.
Sensors and Actuators B: Chemical, 252, 991-1002, (2017)
   

Imidacloprid

Ghodsi J et al., A novel molecularly imprinted sensor for imidacloprid pesticide based on poly(levodopa) electro-polymerized/TiO2 nanoparticles composite.
Analytical and Bioanalytical Chemistry, 410, (29), 7621-7633, (2018)
   

Imidacloprid

Kumar N et al., Application of magnetic molecularly imprinted polymers for extraction of imidacloprid from eggplant and honey.
Food Chemistry, 255, 81-88, (2018)
   

Imidacloprid

Kumar S et al., Designing of fluorescent and magnetic imprinted polymer for rapid, selective and sensitive detection of imidacloprid via activators regenerated by the electron transfer-atom transfer radical polymerization (ARGET-ATRP) technique.
Journal of Physics and Chemistry of Solids, 116, 222-233, (2018)
   

Imidacloprid

Aria MM et al., Uptake and translocation monitoring of imidacloprid to chili and tomato plants by molecularly imprinting extraction - ion mobility spectrometry.
Microchemical Journal, 144, 195-202, (2019)
   

Imidacloprid

Farooq S et al., Synthesis of core-shell magnetic molecularly imprinted polymer for the selective determination of imidacloprid in apple samples.
Journal of Separation Science, 42, (14), 2455-2465, (2019)
   

Imidacloprid

Chen JY et al., Dummy template surface molecularly imprinted polymers based on silica gel for removing imidacloprid and acetamiprid in tea polyphenols.
Journal of Separation Science, 43, (12), 2467-2476, (2020)
   

Imidacloprid

Zhang W et al., A signal on-off ratiometric electrochemical sensor coupled with a molecular imprinted polymer for selective and stable determination of imidacloprid.
Biosensors and Bioelectronics, 154, Article112091-(2020)
   

Imidacloprid

Yin FQ et al., Synthesis and evaluation of mesoporous silica/mesoporous molecularly imprinted nanoparticles as adsorbents for detection and selective removal of imidacloprid in food samples.
Food Chemistry, 364, Article130216-(2021)
   

Imidaclothiz

Yang DD et al., Determination of Three Neonicotinoid Pesticides Residues by High Performence Liquid Chromatography with Molecularly Imprinting Solid Phase Extraction.
Chinese Journal of Analytical Chemistry, 42, (6), 872-977, (2014)
   

imidazole

Mallik S et al., Towards materials for the specific recognition and separation of proteins.
New Journal of Chemistry, 18, 299-304, (1994)
   

imidazole

Ohkubo K et al., Homogeneous and heterogeneous esterolytic catalyzes of imidazole-containing polymers prepared by molecular imprinting of a transition-state analog.
Journal of Molecular Catalysis, 87, (1), L21-L24, (1994)
   

imidazole

Plunkett SD et al., Molecularly imprinted polymers on silica: selective supports for high-performance ligand-exchange chromatography.
Journal of Chromatography A, 708, (1), 19-29, (1995)
   

imidazole

Karmalkar RN et al., Pendent chain linked delivery systems .2. Facile hydrolysis through molecular imprinting effects.
Journal of Controlled Release, 43, (2-3), 235-243, (1997)
   

imidazole

Stewart NAS et al., Imprinting of lyophilized a-chymotrypsin affects the reactivity of the active-site imidazole.
Biochemical and Biophysical Research Communications, 240, (1), 27-31, (1997)
   

imidazole

Ciuffi KJ et al., Polymeric organic-inorganic hybrid material containing iron(III) porphyrin using sol-gel process.
Journal of Non-Crystalline Solids, 247, (1-3), 146-152, (1999)
   

imidazole

Lele BS et al., Molecularly imprinted polymer mimics of chymotrypsin - 1. Cooperative effects and substrate specificity.
Reactive and Functional Polymers, 39, (1), 37-52, (1999)
   

imidazole

Lele BS et al., Molecularly imprinted polymer mimics of chymotrypsin - 2. Functional monomers and hydrolytic activity.
Reactive and Functional Polymers, 40, (3), 215-229, (1999)
   

imidazole

Sellergren B et al., Enantioselective ester hydrolysis catalyzed by imprinted polymers. 2.
Journal of Organic Chemistry, 65, (13), 4009-4027, (2000)
   

imidazole

Chen WY et al., Molecular recognition in imprinted polymers: thermodynamic investigation of analyte binding using microcalorimetry.
Journal of Chromatography A, 923, (1-2), 1-6, (2001)
   

imidazole

Proceeding, Kondo F et al, Molecular design of hydrogel catalyst for hydrolysis -Attempt to molecular imprinting in water-, 
In: Polymer Preprints, Japan, 
1429, (2002)
   

imidazole

Toorisaka E et al., A molecularly imprinted polymer that shows enzymatic activity.
Biochemical Engineering Journal, 14, (2), 85-91, (2003)
   

imidazole

Huang JT et al., Molecularly imprinting of polymeric nucleophilic catalysts containing 4-alkylaminopyridine functions.
Polymer, 45, (12), 4349-4354, (2004)
   

imidazole

Zhu GF et al., Synthesis of surface molecularly imprinted polymer and the selective solid phase extraction of imidazole from its structural analogs.
Talanta, 84, (4), 1124-1132, (2011)
   

imidazole

Kong H et al., Templated Crosslinked Imidazolyl Acrylate for Electronic Detection of Nitroaromatic Explosives.
Advanced Functional Materials, 23, (1), 91-99, (2013)
   

imidazole

Shaabani A et al., Molecularly Imprinted Polymer as an Eco-Compatible Nanoreactor in Multicomponent Reactions: A Remarkable Synergy for Expedient Access to Highly Substituted Imidazoles.
ACS Sustainable Chemistry & Engineering, 5, (10), 9506-9516, (2017)
   

imidazole

Villis PCM et al., Copper(II) Trace Determination in Aqueous/Ethanolic Medium Using an Ionic Imprinted Hybrid.
International Journal of Electrochemical Science, 13, 10564-10586, (2018)
   

imidazole functional

Chen W et al., Molecularly imprinted polymers having amidine and imidazole functional groups as an enzyme-mimetic catalyst for ester hydrolysis.
Macromolecular Research, 10, (2), 122-126, (2002)
   

IMIDAZOLE PROPYL GEL

Ciuffi KJ et al., Polymeric organic-inorganic hybrid material containing iron(III) porphyrin using sol-gel process.
Journal of Non-Crystalline Solids, 247, (1-3), 146-152, (1999)
   

IMIDAZOLE PROPYL GEL

Ciuffi KJ et al., Synthesis of fluorinated metalloporphyrinosilica imprinted with templates through sol-gel process.
Journal of Non-Crystalline Solids, 273, (1-3), 100-108, (2000)
   

IMIDAZOLE PROPYL GEL

Sacco HC et al., Synthesis of manganese porphyrinosilica imprinted with templates using the sol-gel process.
Journal of Non-Crystalline Solids, 273, (1-3), 150-158, (2000)
   

imidazoles

Yamazaki T et al., Towards the use of molecularly imprinted polymers containing imidazoles and bivalent metal complexes for the detection and degradation of organophosphotriester pesticides.
Analytica Chimica Acta, 435, (1), 209-214, (2001)
   

IMIDAZOLINONE

Zhu QZ et al., Selective trace analysis of sulfonylurea herbicides in water and soil samples based on solid-phase extraction using a molecularly imprinted polymer.
Environmental Science & Technology, 36, (24), 5411-5420, (2002)
   

Imidazolinones

Chen Y et al., Molecularly imprinted polymer as a novel solid-phase microextraction coating for the selective enrichment of trace imidazolinones in rice, peanut, and soil.
Journal of Separation Science, 38, (2), 301-308, (2015)
   

Imidazolinones

Casarin J et al., Insight into the performance of molecularly imprinted poly(methacrylic acid) and polyvinylimidazole for extraction of imazethapyr in aqueous medium.
Chemical Engineering Journal, 343, 583-596, (2018)
   

Imidocarb dipropionate

Rizk M et al., A new potentiometric sensor based on molecularly imprinted polymer for analysis of a veterinary drug imidocarb dipropionate.
European Journal of Chemistry, 5, (1), 18-23, (2014)
   

Imidox injection

Rizk M et al., A new potentiometric sensor based on molecularly imprinted polymer for analysis of a veterinary drug imidocarb dipropionate.
European Journal of Chemistry, 5, (1), 18-23, (2014)
   

Iminodiacetate

Bhaskarapillai A et al., Theoretical investigations of the experimentally observed selectivity of a cobalt imprinted polymer.
Biosensors and Bioelectronics, 25, (3), 558-562, (2009)
   

Imipramine

Xu XL et al., A novel molecularly imprinted sensor for selectively probing imipramine created on ITO electrodes modified by Au nanoparticles.
Talanta, 78, (1), 26-32, (2009)
   

IMIPs

Wei HS et al., Preparation of inorganic molecularly imprinted polymers with higher adsorption and selectivity by sol-gel method.
Journal of Chromatography B, 836, (1-2), 57-62, (2006)
   

Imiquimod

Afzali M et al., Developing a novel sensor based on ionic liquid molecularly imprinted polymer/gold nanoparticles/graphene oxide for the selective determination of an anti-cancer drug imiquimod.
Biosensors and Bioelectronics, 143, Article111620-(2019)
   

imitate enzyme catalysis

Liu YQ et al., Progress of the Applied Study on Molecular Imprinting Technique.
Journal of Weinan Teachers College, 20, (2), 43-45,51, (2005)
   

Immobile template

Zhang LP et al., Preparation, characterization, and application of soluble liquid crystalline molecularly imprinted polymer in electrochemical sensor.
Analytical and Bioanalytical Chemistry, 412, (26), 7321-7332, (2020)
   

immobilisation

Schweitz L et al., Molecular imprint-based stationary phases for capillary electrochromatography.
Journal of Chromatography A, 817, (1-2), 5-13, (1998)
   

immobilisation

Piletska EV et al., A new reactive polymer suitable for covalent immobilisation and monitoring of primary amines.
Polymer, 42, (8), 3603-3608, (2001)
   

immobilisation

Ye L et al., Molecular imprinting on microgel spheres.
Analytica Chimica Acta, 435, (1), 187-196, (2001)
   

immobilisation

Dioos BML et al., Aspects of Immobilisation of Catalysts on Polymeric Supports.
Advanced Synthesis & Catalysis, 348, (12-13), 1413-1446, (2006)
   

immobilisation

Vikholm-Lundin I et al., A comparative evaluation of molecular recognition by monolayers composed of synthetic receptors or oriented antibodies.
Biosensors and Bioelectronics, 24, (4), 1036-1038, (2008)
   

immobilisation

Yuan B et al., A novel recycling system for nano-magnetic molecular imprinting immobilised cellulases: Synergistic recovery of anthocyanin from fruit and vegetable waste.
Bioresource Technology, 222, 14-23, (2016)
   

Immobilised

Volkmann A et al., Catalysis of an ester hydrolysis applying molecularly imprinted polymer shells based on an immobilised chiral template.
Reactive and Functional Polymers, 66, (12), 1725-1733, (2006)
   

Immobilised template

Visnjevski A et al., Catalysis of a Diels-Alder cycloaddition with differently fabricated molecularly imprinted polymers.
Catalysis Communications, 6, (9), 601-606, (2005)
   

Immobilised template

Mu LN et al., Low cross-linked molecularly imprinted monolithic column prepared in molecular crowding conditions.
Journal of Chromatography A, 1218, (51), 9236-9243, (2011)
   

immobilization

Cohen SR et al., Thermally induced disorder in organized organic monolayers on solid substrates.
Journal of Physical Chemistry, 90, (14), 3054-3056, (1986)
   

immobilization

Shiomi Y et al., Specific complexation of glucose with a diphenylmethane-3,3’-diboronic acid-derivative - correlation between the absolute configuration of monosaccharide and disaccharide and the circular dichroic activity of the complex.
Journal of the Chemical Society-Perkin Transactions 1, (17), 2111-2117, (1993)
   

immobilization

Book chapter, Guo YZet al., Nanostructured sol-gel composites for electroanalysis, 
In: Proceedings of the Symposium on New Directions in Electroanalytical Chemistry II, Leddy J, Vanysek P, Porter MD (Eds.) 
Electroanalytical Society: Pennington, 210-216, (1999)    

immobilization

Peissker F et al., Crosslinking of imprinted proteases to maintain a tailor-made substrate selectivity in aqueous solutions.
Bioorganic & Medicinal Chemistry, 7, 2231-2237, (1999)
   

immobilization

Yilmaz E et al., The use of immobilized templates - A new approach in molecular imprinting.
Angewandte Chemie International Edition, 39, (12), 2115-2118, (2000)
   

immobilization

Fujimoto C, Enantiomer separation by capillary electrochromatography using fritless packed columns.
Analytical Sciences, 18, (1), 19-25, (2002)
   

immobilization

Fujiwara M et al., A sol-gel method using tetraethoxysilane and acetic anhydride: Immobilization of cubic [mu]-oxo Si-Ti complex in a silica matrix.
Chemistry of Materials, 14, (12), 4975-4981, (2002)
   

immobilization

Hishiya T et al., Molecular imprinting of cyclodextrins leading to synthetic antibodies.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 44, (1-4), 365-367, (2002)
   

immobilization

Mirsky VM, New electroanalytical applications of self-assembled monolayers.
TrAC Trends in Analytical Chemistry, 21, (6-7), 439-450, (2002)
   

immobilization

Tada M et al., Design, characterization and performance of a molecular imprinting Rh-dimer hydrogenation catalyst on a SiO2 surface.
Physical Chemistry Chemical Physics, 4, (23), 5899-5909, (2002)
   

immobilization

Titirici MM et al., Hierarchically imprinted stationary phases: Mesoporous polymer beads containing surface-confined binding sites for adenine.
Chemistry of Materials, 14, (1), 21-23, (2002)
   

immobilization

Trojanowicz M, Determination of pesticides using electrochemical enzymatic biosensors.
Electroanalysis, 14, (19-20), 1311-1328, (2002)
   

immobilization

Yilmaz E, Combining the bioimprinting technique with lipase immobilization for interesterification.
World Journal Of Microbiology & Biotechnology, 18, (7), 621-625, (2002)
   

immobilization

Arai T et al., "Catalyst analogue": A concept for constructing multicomponent asymmetric catalysts (MAC) by using a polymer support.
Angewandte Chemie International Edition, 42, (19), 2144-2147, (2003)
   

immobilization

Fernandez-Sanchez JF et al., A sensitive fluorescence optosensor for analysing propranolol in pharmaceutical preparations and a test for its control in urine in sport.
Journal of Pharmaceutical and Biomedical Analysis, 31, (5), 859-865, (2003)
   

immobilization

Fishman A et al., Bio-imprinting of lipases with fatty acids.
Journal of Molecular Catalysis B: Enzymatic, 22, (3-4), 193-202, (2003)
   

immobilization

Mitchell-Koch JT et al., Immobilization of a europium salen complex within porous organic hosts: Modulation of luminescence properties in different chemical environments.
Chemistry of Materials, 15, (18), 3490-3495, (2003)
   

immobilization

Piletsky S et al., Surface functionalization of porous polypropylene membranes with polyaniline for protein immobilization.
Biotechnology and Bioengineering, 82, (1), 86-92, (2003)
   

immobilization

Vidal JC et al., Recent advances in electropolymerized conducting polymers in amperometric biosensors.
Microchimica Acta, 143, (2-3), 93-111, (2003)
   

immobilization

Hilal N et al., Immobilization of cross-linked lipase aggregates within microporous polymeric membranes.
Journal of Membrane Science, 238, (1-2), 131-141, (2004)
   

immobilization

Kubo T et al., Interval immobilization technique for recognition toward a highly hydrophilic cyanobacterium toxin.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 806, (2), 229-235, (2004)
   

immobilization

Kubo T et al., Target-selective ion-exchange media for highly hydrophilic compounds: a possible solution by use of the "interval immobilization technique".
Analytical and Bioanalytical Chemistry, 378, (1), 84-88, (2004)
   

immobilization

Vaidya A et al., Altering glucose oxidase to oxidize D-galactose through crosslinking of imprinted protein.
ChemBioChem, 5, (1), 132-135, (2004)
   

immobilization

Book chapter, Setford SJet al., Enzyme Biosensors, 
In: Microbial Enzymes and Biotransformations, Barredo JL (Ed.) 
29-60, (2005)    

immobilization

Song CE et al., Improved Catalytic Performances of Supported Catalysts.
Advances in Organic Synthesis, 1, (1), 233-260, (2005)
   

immobilization

Matsui T et al., Improved Method of Molecular Imprinting of Cyclodextrin on Silica-gel Surface for the Preparation of Stable Stationary HPLC Phase.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 56, (1-2), 39-44, (2006)
   

immobilization

Wu JM et al., Trypsin immobilization by direct adsorption on metal ion chelated macroporous chitosan-silica gel beads.
International Journal of Biological Macromolecules, 39, (4-5), 185-191, (2006)
   

immobilization

Li Q et al., Studies of adsorption for heavy metal ions and degradation of methyl orange based on the surface of ion-imprinted adsorbent.
Process Biochemistry, 42, (3), 379-383, (2007)
   

immobilization

Yan JY et al., Combined strategy for preparation of a bioimprinted Geotrichum sp. lipase biocatalyst effective in non-aqueous media.
Process Biochemistry, 44, (10), 1128-1132, (2009)
   

immobilization

Okutucu B et al., Immobilization of α-galactosidase on galactose-containing polymeric beads.
Enzyme and Microbial Technology, 46, (3-4), 200-205, (2010)
   

immobilization

Hellner G et al., Novel Sol-Gel Lipases by Designed Bioimprinting for Continuous-Flow Kinetic Resolutions.
Advanced Synthesis & Catalysis, 353, (13), 2481-2491, (2011)
   

immobilization

Kahveci D et al., Enhancement of activity and selectivity of Candida rugosa lipase and Candida antarctica lipase A by bioimprinting and/or immobilization for application in the selective ethanolysis of fish oil.
Biotechnology Letters, 33, (10), 2065-2071, (2011)
   

immobilization

Buhani et al., Production of Ionic Imprinted Polymer from Nannochloropsis sp Biomass and its Adsorption Characteristics Toward Cu(II) Ion in Solutions.
Asian Journal of Chemistry, 24, (1), 133-140, (2012)
   

immobilization

Cheung MC et al., Porous nanostructured encapsulation and immobilization materials for optical biosensors.
IEEE Journal on Selected Topics in Quantum Electronics, 18, (3), 1147-1159, (2012)
   

immobilization

da Silva MS et al., Supercritical CO2-assisted preparation of a PMMA composite membrane for bisphenol A recognition in aqueous environment.
Chemical Engineering Science, 68, (1), 94-100, (2012)
   

immobilization

Mafu LD et al., Ion-imprinted polymers for environmental monitoring of inorganic pollutants: synthesis, characterization, and applications.
Environmental Science and Pollution Research, 20, (2), 790-802, (2013)
   

immobilization

Nie GJ et al., Enhancement of transesterification-catalyzing capability of bio-imprinted tannase in organic solvents by cryogenic protection and immobilization.
Journal of Molecular Catalysis B: Enzymatic, 94, 1-6, (2013)
   

immobilization

Chaudhary S et al., Controlled short-linkage assembly of functional nano-objects.
Applied Surface Science, 300, 22-28, (2014)
   

immobilization

Ertürk G et al., Cryogels-versatile tools in bioseparation.
Journal of Chromatography A, 1357, 24-35, (2014)
   

immobilization

Ertürk G et al., Real-time prostate-specific antigen detection with prostate-specific antigen imprinted capacitive biosensors.
Analytica Chimica Acta, 891, 120-129, (2015)
   

immobilization

Kartal F, Enhanced esterification activity through interfacial activation and cross-linked immobilization mechanism of Rhizopus oryzae lipase in a nonaqueous medium.
Biotechnology Progress, 32, (4), 899-904, (2016)
   

immobilization

Tao QL et al., Application of Molecular Imprinted Magnetic Fe3O4@SiO2 Nanoparticles for Selective Immobilization of Cellulase.
Journal of Nanoscience and Nanotechnology, 16, (6), 6055-6060, (2016)
   

immobilization

Weiser D et al., Bioimprinted lipases in PVA nanofibers as efficient immobilized biocatalysts.
Tetrahedron, 72, (46), 7335-7342, (2016)
   

immobilization

Shen M et al., Site-selective orientated immobilization of antibodies and conjugates for immunodiagnostics development.
Methods, 116, 95-111, (2017)
   

immobilization

Bansal BN et al., Biosensor Design Aspects for Pesticide Monitoring.
International Journal of Advanced Research in Electronics and Communication Engineering, 7, (4), 403-407, (2018)
   

immobilization

Li K et al., Enhancing enzyme activity and enantioselectivity of Burkholderia cepacia lipase via immobilization on melamine-glutaraldehyde dendrimer modified magnetic nanoparticles.
Chemical Engineering Journal, 351, 258-268, (2018)
   

immobilization

Book chapter, Saranya Ret al., Affinity Membranes for Capture of Cells and Biological Substances, 
In: Filtering Media by Electrospinning: Next Generation Membranes for Separation Applications, Focarete ML, Gualandi C, Ramakrishna S (Eds.) 
Springer International Publishing: Cham, 175-195, (2018)    

immobilization

Herrera-Chacón A et al., Molecularly imprinted polymers - towards electrochemical sensors and electronic tongues.
Analytical and Bioanalytical Chemistry, 413, (24), 6117-6140, (2021)
   

immobilization

Sánchez DA et al., Immobilization and bioimprinting strategies to enhance the performance in organic medium of the metagenomic lipase LipC12.
Journal of Biotechnology, 342, 13-27, (2021)
   

immobilization-imprinting

Yilmaz E, Combining the bioimprinting technique with lipase immobilization for interesterification.
World Journal Of Microbiology & Biotechnology, 18, (7), 621-625, (2002)
   

immobilization in organic solvents

Book chapter, Cao LQ, Unconventional Enzyme Immobilization, 
In: Carrier-bound Immobilized Enzymes, Cao LQ (Ed.) 
Wiley-VCH: 449-549, (2006)    

Immobilized

Shiomi T et al., A method for the molecular imprinting of hemoglobin on silica surfaces using silanes.
Biomaterials, 26, (27), 5564-5571, (2005)
   

IMMOBILIZED AMPEROMETRIC BIOSENSOR

Gill I, Bio-doped nanocomposite polymers: Sol-gel bioencapsulates.
Chemistry of Materials, 13, (10), 3404-3421, (2001)
   

Immobilized Artificial Membranes (IAM)

Buszewski B et al., Stationary phases with special structural properties for high-throughput separation techniques: Preparation, characterization and applications.
Combinatorial Chemistry & High Throughput Screening, 7, (4), 291-312, (2004)
   

Immobilized bacteria

Liu F et al., Molecularly imprinted nanofiber membranes enhanced biodegradation of trace bisphenol A by Pseudomonas aeruginosa.
Chemical Engineering Journal, 262, 989-998, (2015)
   

Immobilized cells

Book chapter, Mattiasson B, Cryogels for Biotechnological Applications, 
In: Polymeric Cryogels, Okay O (Ed.) 
Springer International Publishing: 245-281, (2014)    

IMMOBILIZED CELLULASE

Nilsson S et al., Three approaches to enantiomer separation of β-adrenergic antagonists by capillary electrochromatography.
Electrophoresis, 18, (6), 884-890, (1997)
   

IMMOBILIZED CU(II)

Chen WY et al., Molecular recognition in imprinted polymers: thermodynamic investigation of analyte binding using microcalorimetry.
Journal of Chromatography A, 923, (1-2), 1-6, (2001)
   

immobilized enzyme

Soldatkin AP et al., Biosensors. A quarter of a century of R&D experience.
Biopolymers and Cell, 29, (3), 188-206, (2013)
   

Immobilized enzymes

Graber M et al., Improved racemate resolution of pentan-2-ol and trans-(Z)-cyclooct-5-ene-1,2-diol by lipase catalysis.
Journal of Biotechnology, 238, 60-68, (2016)
   

immobilized imprinting of proteins

Kronenburg NAE et al., Improvement of enantioselectivity by immobilized imprinting of epoxide hydrolase from Rhodotorula glutinis.
Journal of Molecular Catalysis B: Enzymatic, 16, (3-4), 121-129, (2001)
   

Immobilized metal ion affinity chromatography

Hage DS et al., Pharmaceutical and biomedical applications of affinity chromatography: Recent trends and developments.
Journal of Pharmaceutical and Biomedical Analysis, 69, 93-105, (2012)
   

immobilized nanoparticles

Liu QS et al., Novel Beta-Tubulin-Immobilized Nanoparticles Affinity Material for Screening β-Tubulin Inhibitors from a Complex Mixture.
ACS Applied Materials & Interfaces, 9, (7), 5725-5732, (2017)
   

IMMOBILIZED REAGENTS

Zhang ZY et al., Recent developments and applications of chemiluminescence sensors.
Analytica Chimica Acta, 541, (1-2), 37-46, (2005)
   

immobilized template

Poma A et al., Solid-Phase Synthesis of Molecularly Imprinted Polymer Nanoparticles with a Reusable Template-"Plastic Antibodies".
Advanced Functional Materials, 23, (22), 2821-2827, (2013)
   

immobilized template

Mehdinia A et al., Design of a surface-immobilized 4-nitrophenol molecularly imprinted polymer via pre-grafting amino functional materials on magnetic nanoparticles.
Journal of Chromatography A, 1364, 12-19, (2014)
   

immobilized template

Dai QZ et al., Adsorption and specific recognition of DNA by using imprinted polymer layers grafted onto ionic liquid functionalized magnetic microspheres.
Microchimica Acta, 184, (11), 4433-4441, (2017)
   

immobilized templates

Visnjevski A et al., Catalyzing a cycloaddition with molecularly imprinted polymers obtained via immobilized templates.
Applied Catalysis A: General, 260, (2), 169-174, (2004)
   

Immobilized template strategy

Zhao YY et al., Surface imprinted polymers based on amino-hyperbranched magnetic nanoparticles for selective extraction and detection of chlorogenic acid in Honeysuckle tea.
Talanta, 181, 271-277, (2018)
   

IMMOBILIZED THERMOLYSIN

Ye L et al., A new application of molecularly imprinted materials.
Journal of Molecular Recognition, 11, (1-6), 75-78, (1998)
   

IMMOBILIZED THERMOLYSIN

Ye L et al., Use of molecularly imprinted polymers in a biotransformation process.
Biotechnology and Bioengineering, 64, (6), 650-655, (1999)
   

Immobilizing support

Fontanals N et al., Ionic liquids in solid-phase extraction.
TrAC Trends in Analytical Chemistry, 41, 15-26, (2012)
   

Immune-like membrane

Hong CC et al., Point-of-care protein sensing platform based on immuno-like membrane with molecularly-aligned nanocavities.
Biosensors and Bioelectronics, 50, 425-430, (2013)
   

Immune response to space flight

Aponte VM et al., Considerations for non-invasive in-flight monitoring of astronaut immune status with potential use of MEMS and NEMS devices.
Life Sciences, 79, (14), 1317-1333, (2006)
   

immune system in a bottle and on a leash

Book chapter, Dunn IS, Evolving and Creating Recognition Molecules, 
In: Searching for Molecular Solutions - Empirical Discovery and its Future, 
John Wiley & Sons Inc.: Hoboken, 234-274, (2009)    

immunity

Yuan H et al., The Fabrication and Application of Bio-Functional Microspheres.
Current Organic Chemistry, 18, (17), 2270-2279, (2014)
   

immunoaffinity

Pichon V et al., Immunosorbents: natural molecular recognition materials for sample preparation of complex environmental matrices.
TrAC Trends in Analytical Chemistry, 18, (3), 219-235, (1999)
   

immunoaffinity

Stevenson D, Immuno-affinity solid-phase extraction.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 745, (1), 39-48, (2000)
   

immunoaffinity

Weller MG, Immunochromatographic techniques - a critical review.
Fresenius Journal of Analytical Chemistry, 366, (6-7), 635-645, (2000)
   

immunoaffinity

Stroink T et al., On-line sample preconcentration in capillary electrophoresis, focused on the determination of proteins and peptides.
Electrophoresis, 22, (12), 2375-2383, (2001)
   

immunoaffinity

Lemay P, The use of high pressure for separation and production of bioactive molecules.
Biochimica et Biophysica Acta - Protein Structure and Molecular Enzymology, 1595, (1-2), 357-366, (2002)
   

immunoaffinity

Walker V et al., Solid-phase extraction in clinical biochemistry.
Annals of Clinical Biochemistry, 39, (5), 464-477, (2002)
   

immunoaffinity

Zhu QZ et al., Selective trace analysis of sulfonylurea herbicides in water and soil samples based on solid-phase extraction using a molecularly imprinted polymer.
Environmental Science & Technology, 36, (24), 5411-5420, (2002)
   

immunoaffinity

Hennion MC et al., Immuno-based sample preparation for trace analysis.
Journal of Chromatography A, 1000, (1-2), 29-52, (2003)
   

immunoaffinity

Poole CF, New trends in solid-phase extraction.
TrAC Trends in Analytical Chemistry, 22, (6), 362-373, (2003)
   

immunoaffinity

Monaci L et al., Determination of ochratoxin A in foods: state-of-the-art and analytical challenges.
Analytical and Bioanalytical Chemistry, 378, (1), 96-103, (2004)
   

immunoaffinity

Pichon V et al., A dual analytical approach for the selective extraction of organic pollutants in environmental matrices: immunosorbents and molecularly imprinted polymers.
Actualité Chimique, 277-278, 15-26, (2004)
   

immunoaffinity

Mehdinia A et al., Advances for sensitive, rapid and selective extraction in different configurations of solid-phase microextraction.
TrAC Trends in Analytical Chemistry, 51, 13-22, (2013)
   

Immunoaffinity-based solid-phase extraction (IASPE)

Li G et al., Recent applications of solid-phase extraction techniques for analysis of trace residues and contaminants in food.
Chinese Journal of Chromatography, 29, (7), 606-612, (2011)
   

immunoaffinity chromatography

Ferrer I et al., Validation of new solid-phase extraction materials for the selective enrichment of organic contaminants from environmental samples.
TrAC Trends in Analytical Chemistry, 18, (3), 180-192, (1999)
   

immunoaffinity chromatography

Hogendoorn E et al., Recent and future developments of liquid chromatography in pesticide trace analysis.
Journal of Chromatography A, 892, (1-2), 435-453, (2000)
   

immunoaffinity chromatography

Weller MG, Immunochromatographic techniques - a critical review.
Fresenius Journal of Analytical Chemistry, 366, (6-7), 635-645, (2000)
   

immunoaffinity chromatography

Theodoridis G et al., Modern sample preparation methods in chemical analysis.
Mikrochimica Acta, 136, (3-4), 199-204, (2001)
   

immunoaffinity chromatography

Pyrzynska K, Novel selective sorbents for solid-phase extraction.
Chemia Analityczna, 48, (5), 781-795, (2003)
   

immunoaffinity chromatography

Pichon V et al., A dual analytical approach for the selective extraction of organic pollutants in environmental matrices: immunosorbents and molecularly imprinted polymers.
Actualité Chimique, 277-278, 15-26, (2004)
   

immunoaffinity chromatography

Hage DS et al., Pharmaceutical and biomedical applications of affinity chromatography: Recent trends and developments.
Journal of Pharmaceutical and Biomedical Analysis, 69, 93-105, (2012)
   

immunoaffinity chromatography

Bereli N et al., Oriented immobilized anti-hIgG via Fc fragment-imprinted PHEMA cryogel for IgG purification.
Biomedical Chromatography, 27, (5), 599-607, (2013)
   

immunoaffinity chromatography

Armenta S et al., Highly selective solid-phase extraction sorbents for chloramphenicol determination in food and urine by ion mobility spectrometry.
Analytical and Bioanalytical Chemistry, 408, (29), 8559-8567, (2016)
   

IMMUNOAFFINITY COLUMN CLEANUP

Hennion MC et al., Immuno-based sample preparation for trace analysis.
Journal of Chromatography A, 1000, (1-2), 29-52, (2003)
   

IMMUNOAFFINITY COLUMN CLEANUP

Blahova E et al., Approaches in sample handling before HPLC analysis of complex matrices.
Chemical Papers-Chemicke Zvesti, 58, (5), 362-373, (2004)
   

IMMUNOAFFINITY COLUMN CLEANUP

Maier NM et al., Molecularly imprinted polymer-assisted sample clean-up of ochratoxin A from red wine: merits and limitations.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 103-111, (2004)
   

IMMUNOAFFINITY COLUMN CLEANUP

Monaci L et al., Determination of ochratoxin A in foods: state-of-the-art and analytical challenges.
Analytical and Bioanalytical Chemistry, 378, (1), 96-103, (2004)
   

immunoaffinity extraction

Pichon V et al., Immunosorbents: natural molecular recognition materials for sample preparation of complex environmental matrices.
TrAC Trends in Analytical Chemistry, 18, (3), 219-235, (1999)
   

immunoaffinity extraction

Weller MG, Immunochromatographic techniques - a critical review.
Fresenius Journal of Analytical Chemistry, 366, (6-7), 635-645, (2000)
   

immunoaffinity extraction

Hennion MC et al., Immuno-based sample preparation for trace analysis.
Journal of Chromatography A, 1000, (1-2), 29-52, (2003)
   

IMMUNOAFFINITY SAMPLE PRETREATMENT

Hage DS, Affinity chromatography: A review of clinical applications.
Clinical Chemistry, 45, (5), 593-615, (1999)
   

Immunoaffinity solid-phase extraction

Plotka-Wasylka J et al., Miniaturized solid-phase extraction techniques.
TrAC Trends in Analytical Chemistry, 73, 19-38, (2015)
   

immunoassay

Book chapter, Andersson LIet al., Molecular Imprinting: The current status and future development of polymer-based recognition systems, 
In: Biochemical Technology, Part B, Bittar EE, Danielsson B, Bulow L (Eds.) 
Elsevier: Amsterdam, 651-670, (1996)    

immunoassay

Berglund J et al., Selection of phage display combinatorial library peptides with affinity for a yohimbine imprinted methacrylate polymer.
Analytical Communications, 35, (1), 3-7, (1998)
   

immunoassay

Ramström O et al., Molecular imprinting technology: Challenges and prospects for the future.
Chirality, 10, (3), 195-209, (1998)
   

immunoassay

Hage DS, Affinity chromatography: A review of clinical applications.
Clinical Chemistry, 45, (5), 593-615, (1999)
   

immunoassay

Haupt K, Molecularly imprinted sorbent assays and the use of non-related probes.
Reactive and Functional Polymers, 41, (1-3), 125-131, (1999)
   

immunoassay

Ye L et al., Molecularly imprinted monodisperse microspheres for competitive radioassay.
Analytical Communications, 36, (2), 35-38, (1999)
   

immunoassay

Andersson LI, Molecular imprinting: developments and applications in the analytical chemistry field.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 745, (1), 3-13, (2000)
   

immunoassay

Andersson LI, Molecular imprinting for drug bioanalysis - A review on the application of imprinted polymers to solid-phase extraction and binding assay.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 739, (1), 163-173, (2000)
   

immunoassay

Idziak I et al., A molecularly imprinted polymer for 17a-ethynylestradiol evaluated by immunoassay.
Analyst, 125, (8), 1415-1417, (2000)
   

immunoassay

Vallano PT et al., Highly selective separations by capillary electrochromatography: molecular imprint polymer sorbents.
Journal of Chromatography A, 887, (1-2), 125-135, (2000)
   

immunoassay

Weller MG, Immunochromatographic techniques - a critical review.
Fresenius Journal of Analytical Chemistry, 366, (6-7), 635-645, (2000)
   

immunoassay

Haupt K et al., Molecularly imprinted polymers: concept and applications.
Actualité Chimique, (4), 23-32, (2001)
   

immunoassay

Luppa PB et al., Immunosensors - principles and applications to clinical chemistry.
Clinica Chimica Acta, 314, (1-2), 1-26, (2001)
   

immunoassay

Surugiu I et al., Biomimetic arrays for optical multisensing.
Abstracts of Papers of the American Chemical Society, 221, (AGRO), 60-60, (2001)
   

immunoassay

Ye L et al., Molecularly imprinted microspheres as antibody binding mimics.
Reactive and Functional Polymers, 48, (1-3), 149-157, (2001)
   

immunoassay

Ansell RJ, MIP-ligand binding assays (pseudo-immunoassays).
Bioseparation, 10, (6), 365-377, (2002)
   

immunoassay

Book chapter, Findlay JWAet al., Enzyme immunoassay and related bioanalytical methods, 
In: Encyclopedia of Pharmaceutical Technology, Swarbrick J, Boylan JC (Eds.) 
Marcel Dekker: 1086-1101, (2002)    

immunoassay

Lai E, New developments towards the use of molecularly imprinted polymers in drug discovery.
Business Briefings, 92-95, (2002)
   

immunoassay

Yan MD, Molecularly imprinted polymers as antibody mimics: Applications in immunoassays and recent developments.
Journal of Clinical Ligand Assay, 25, (2), 234-236, (2002)
   

immunoassay

Kuijt J et al., Room temperature phosphorescence in the liquid state as a tool in analytical chemistry.
Analytica Chimica Acta, 488, (2), 135-171, (2003)
   

immunoassay

Ansell RJ, Molecularly imprinted polymers in pseudoimmunoassay.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 151-165, (2004)
   

immunoassay

Lavignac N et al., Current status of molecularly imprinted polymers as alternatives to antibodies in sorbent assays.
Analytica Chimica Acta, 510, (2), 139-145, (2004)
   

immunoassay

Maragos CM, Emerging technologies for mycotoxin detection.
Journal of Toxicology-Toxin Reviews, 23, (2-3), 317-344, (2004)
   

immunoassay

Monk DJ et al., Optical fiber-based biosensors.
Analytical and Bioanalytical Chemistry, 379, (7-8), 931-945, (2004)
   

immunoassay

Row KH et al., Manufacture and separation characteristic of MIP.
Korean Chemical Engineering Research, 42, (6), 635-645, (2004)
   

immunoassay

Ye L et al., Molecularly imprinted polymers as antibody and receptor mimics for assays, sensors and drug discovery.
Analytical and Bioanalytical Chemistry, 378, (8), 1887-1897, (2004)
   

immunoassay

Vikholm-Lundin I et al., A comparative evaluation of molecular recognition by monolayers composed of synthetic receptors or oriented antibodies.
Biosensors and Bioelectronics, 24, (4), 1036-1038, (2008)
   

immunoassay

Sun FX et al., Analytical methods and recent developments in the detection of melamine.
TrAC Trends in Analytical Chemistry, 29, (11), 1239-1249, (2010)
   

immunoassay

Tang PP et al., An Indirect Inhibitive Immunoassay for Detection of Low Concentration Sulfamethoxazole in Aqueous Solution.
Chinese Journal of Analytical Chemistry, 38, (7), 1019-1022, (2010)
   

immunoassay

Tsai HH et al., Multiple type biosensors fabricated using the CMOS BioMEMS platform.
Sensors and Actuators B: Chemical, 144, (2), 407-412, (2010)
   

immunoassay

Fodey T et al., Developments in the production of biological and synthetic binders for immunoassay and sensor-based detection of small molecules.
TrAC Trends in Analytical Chemistry, 30, (2), 254-269, (2011)
   

immunoassay

Tse Sum Bui B et al., Preparation and evaluation of a molecularly imprinted polymer for the selective recognition of testosterone - application to molecularly imprinted sorbent assays.
Journal of Molecular Recognition, 24, (6), 1123-1129, (2011)
   

immunoassay

Wang XH et al., Preparation and Application of Molecularly Imprinted Polymers.
Shanghai Plastics, (3), 1-4, (2011)
   

immunoassay

Baggiani C et al., MIP-based immunoassays: State of the Art, limitations and Perspectives.
Molecular Imprinting, 1, 41-54, (2013)
   

immunoassay

Iranifam M, Analytical applications of chemiluminescence-detection systems assisted by magnetic microparticles and nanoparticles.
TrAC Trends in Analytical Chemistry, 51, 51-70, (2013)
   

immunoassay

Muzyka K, Current trends in the development of the electrochemiluminescent immunosensors.
Biosensors and Bioelectronics, 54, 393-407, (2014)
   

immunoassay

Xu F et al., Immunoassay of chemical contaminants in milk: A review.
Journal of Integrative Agriculture, 14, (11), 2282-2295, (2015)
   

immunoassay

Bedwell TS et al., Analytical applications of MIPs in diagnostic assays: future perspectives.
Analytical and Bioanalytical Chemistry, 408, (7), 1735-1751, (2016)
   

immunoassay

Iranifam M, Analytical applications of chemiluminescence systems assisted by carbon nanostructures.
TrAC Trends in Analytical Chemistry, 80, 387-415, (2016)
   

immunoassay

Sun FX et al., Recent advances and progress in the detection of bisphenol A.
Analytical and Bioanalytical Chemistry, 408, (25), 6913-6927, (2016)
   

immunoassay

Zhang W et al., Current advancement in analysis of β-agonists.
TrAC Trends in Analytical Chemistry, 85, (Part C), 1-16, (2016)
   

immunoassay

Muhammad P et al., Molecularly Imprinted Plasmonic Substrates for Specific and Ultrasensitive Immunoassay of Trace Glycoproteins in Biological Samples.
ACS Applied Materials & Interfaces, 9, (13), 12082-12091, (2017)
   

immunoassay

Cenci L et al., Study on molecularly imprinted nanoparticle modified microplates for pseudo-ELISA assays.
Talanta, 178, 772-779, (2018)
   

immunoassay

Beloglazova N et al., Bioimprinting for multiplex luminescent detection of deoxynivalenol and zearalenone.
Talanta, 192, 169-174, (2019)
   

immunoassay

Zhang HQ, Molecularly Imprinted Nanoparticles for Biomedical Applications.
Advanced Materials, 32, (3), Article1806328-(2020)
   

immunoassay like technique

Senholdt M et al., Determination of cyclosporin A and metabolites total concentration using a molecularly imprinted polymer based radioligand binding assay.
Analytical Letters, 30, (10), 1809-1821, (1997)
   

immunoassays

Ansell RJ et al., Towards artificial antibodies prepared by molecular imprinting.
Clinical Chemistry, 42, (9), 1506-1512, (1996)
   

immunoassays

Hage DS, Affinity chromatography: A review of clinical applications.
Clinical Chemistry, 45, (5), 593-615, (1999)
   

immunoassays

Haupt K, Molecularly imprinted sorbent assays and the use of non-related probes.
Reactive and Functional Polymers, 41, (1-3), 125-131, (1999)
   

immunoassays

Heegaard NHH et al., Identification, quantitation, and characterization of biomolecules by capillary electrophoretic analysis of binding interactions.
Electrophoresis, 20, (15-16), 3122-3133, (1999)
   

immunoassays

Vallano PT et al., Highly selective separations by capillary electrochromatography: molecular imprint polymer sorbents.
Journal of Chromatography A, 887, (1-2), 125-135, (2000)
   

immunoassays

Weller MG, Immunochromatographic techniques - a critical review.
Fresenius Journal of Analytical Chemistry, 366, (6-7), 635-645, (2000)
   

immunoassays

Haupt K et al., Molecularly imprinted polymers: concept and applications.
Actualité Chimique, (4), 23-32, (2001)
   

immunoassays

Luo CH et al., Thickness-shear mode acoustic sensor for atrazine using molecularly imprinted polymer as recognition element.
Analytica Chimica Acta, 428, (1), 143-148, (2001)
   

immunoassays

Scheller FW et al., Research and development in biosensors.
Current Opinion in Biotechnology, 12, (1), 35-40, (2001)
   

immunoassays

Surugiu I et al., Biomimetic arrays for optical multisensing.
Abstracts of Papers of the American Chemical Society, 221, (AGRO), 60-60, (2001)
   

immunoassays

Ansell RJ, MIP-ligand binding assays (pseudo-immunoassays).
Bioseparation, 10, (6), 365-377, (2002)
   

immunoassays

Lai E, New developments towards the use of molecularly imprinted polymers in drug discovery.
Business Briefings, 92-95, (2002)
   

immunoassays

Yan MD, Molecularly imprinted polymers as antibody mimics: Applications in immunoassays and recent developments.
Journal of Clinical Ligand Assay, 25, (2), 234-236, (2002)
   

immunoassays

Kuijt J et al., Room temperature phosphorescence in the liquid state as a tool in analytical chemistry.
Analytica Chimica Acta, 488, (2), 135-171, (2003)
   

immunoassays

Ansell RJ, Molecularly imprinted polymers in pseudoimmunoassay.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 151-165, (2004)
   

immunoassays

Lavignac N et al., Current status of molecularly imprinted polymers as alternatives to antibodies in sorbent assays.
Analytica Chimica Acta, 510, (2), 139-145, (2004)
   

immunoassays

Maragos CM, Emerging technologies for mycotoxin detection.
Journal of Toxicology-Toxin Reviews, 23, (2-3), 317-344, (2004)
   

immunoassays

Ge Y et al., Molecularly Imprinted Sorbent Assays: Recent Developments and Applications.
Chemistry - A European Journal, 15, (33), 8100-8107, (2009)
   

immunoassays

Qi XL et al., The synthetic methods and application of molecularly printed polymers.
Chemical Research and Application, 21, (4), 441-449, (2009)
   

immunoassays

Hayat A et al., Recent advances in ochratoxin A-producing fungi detection based on PCR methods and ochratoxin A analysis in food matrices.
Food Control, 26, (2), 401-415, (2012)
   

immunoassays

Algarra M et al., Current analytical strategies for C-reactive protein quantification in blood.
Clinica Chimica Acta, 415, 1-9, (2013)
   

immunoassays

Trojanowicz M et al., Flow methods in chiral analysis.
Analytica Chimica Acta, 801, 59-69, (2013)
   

immunoassays

Ye J et al., A Boronate Affinity Sandwich Assay: An Appealing Alternative to Immunoassays for the Determination of Glycoproteins.
Angewandte Chemie International Edition, 53, (39), 10386-10389, (2014)
   

immunoassay style techniques

Siemann M et al., Selective recognition of the herbicide atrazine by noncovalent molecularly imprinted polymers.
Journal of Agricultural and Food Chemistry, 44, (1), 141-145, (1996)
   

Immunoassay test

Rincon JE et al., Molecular Imprinted Silica with West Nile Antibody Templates show Specific and Selective Binding in Immunoassays.
Journal of Biotechnology & Biomaterials, 7, ArticleNo260-(2017)
   

Immuno-based analysis

Du FY et al., Analytical methods for tracing plant hormones.
Analytical and Bioanalytical Chemistry, 403, (1), 55-74, (2012)
   

Immunocapture

Rossetti C et al., Evaluation of affinity-based serum clean-up in mass spectrometric analysis: Plastic vs monoclonal antibodies.
Journal of Chromatography A, 1471, 19-26, (2016)
   

Immunocapture

Halvorsen TG et al., Affinity capture in bottom-up protein analysis - Overview of current status of proteolytic peptide capture using antibodies and molecularly imprinted polymers.
Analytica Chimica Acta, 1182, Article338714-(2021)
   

IMMUNOCHEMICAL DETECTION

Weller MG, Immunochromatographic techniques - a critical review.
Fresenius Journal of Analytical Chemistry, 366, (6-7), 635-645, (2000)
   

immunochemical methods

Visconti A et al., Fitness for purpose - Ochratoxin A analytical developments.
Food Additives and Contaminants, 22, (Suppl. 1), 37-44, (2005)
   

immunochemical methods

Meulenberg EP, Immunochemical Methods for Ochratoxin A Detection: A Review.
Toxins, 4, (4), 244-266, (2012)
   

immunochemical methods

Goryacheva IY, Contemporary trends in the development of immunochemical methods for medical analysis.
Journal of Analytical Chemistry, 70, (8), 903-914, (2015)
   

IMMUNOCHEMICAL TECHNIQUES

Sellergren B, Imprinted polymers: Stable, reusable antibody-mimics for highly selective separations.
American Laboratory, 29, 14-14, (1997)
   

IMMUNOCHEMICAL TECHNIQUES

Owens PK et al., Molecular imprinting for bio-and pharmaceutical analysis.
TrAC Trends in Analytical Chemistry, 18, (3), 146-154, (1999)
   

IMMUNOCHEMICAL TECHNIQUES

Kröger S et al., Biosensors for marine pollution research, monitoring and control.
Marine Pollution Bulletin, 45, (1-12), 24-34, (2002)
   

Immunodipstick

Prieto-Simón B et al., Emerging biotools for assessment of mycotoxins in the past decade.
TrAC Trends in Analytical Chemistry, 26, (7), 689-702, (2007)
   

immuno-extraction

Stevenson D, Immuno-affinity solid-phase extraction.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 745, (1), 39-48, (2000)
   

immunoextraction

Hennion MC et al., Immuno-based sample preparation for trace analysis.
Journal of Chromatography A, 1000, (1-2), 29-52, (2003)
   

immunoextraction

Chapuis F et al., Retention mechanism of analytes in the solid-phase extraction process using molecularly imprinted polymers - Application to the extraction of triazines from complex matrices.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 93-101, (2004)
   

immunoextraction

Potter OG et al., Porous polymer monoliths for extraction: Diverse applications and platforms.
Journal of Separation Science, 31, (11), 1881-1906, (2008)
   

immunofiltration

Hennion MC et al., Immuno-based sample preparation for trace analysis.
Journal of Chromatography A, 1000, (1-2), 29-52, (2003)
   

Immunoglobulin

Lieberzeit PA et al., Functional Materials for Biosensing-From Proteins to Cells and Pollen.
Sensor Letters, 6, (4), 641-645, (2008)
   

Immunoglobulin

Schirhagl R et al., Antibodies and Their Replicae in Microfluidic Sensor Systems-Labelfree Quality Assessment in Food Chemistry and Medicine.
Sensor Letters, 8, (3), 399-404, (2010)
   

Immunoglobulin binding protein

Gao JF et al., The design of protein-imprinted polymers as antibody substitutes for investigating protein-protein interactions.
Biomaterials, 33, (11), 3344-3352, (2012)
   

immunoglobulin G

Nematollahzadeh A et al., High-Capacity Hierarchically Imprinted Polymer Beads for Protein Recognition and Capture.
Angewandte Chemie International Edition, 50, (2), 495-498, (2011)
   

immunoglobulin G

Yang HH et al., Depletion of albumin and immunoglobulin G from human serum using epitope-imprinted polymers as artificial antibodies.
Journal of Biomedical Materials Research Part A, 101A, (7), 1935-1942, (2013)
   

immunoglobulin G

Saylan Y et al., Surface imprinting approach for preparing specific adsorbent for IgG separation.
Journal of Biomaterials Science-Polymer Edition, 25, (9), 881-894, (2014)
   

immunoglobulin G

Tretjakov A et al., Molecularly imprinted polymer film interfaced with Surface Acoustic Wave technology as a sensing platform for label-free protein detection.
Analytica Chimica Acta, 902, 182-188, (2016)
   

immunoglobulin G

Bai R et al., Preparation of IgG imprinted polymers by metal-free visible-light-induced ATRP and its application in biosensor.
Talanta, 226, Article122160-(2021)
   

Immunoglobulin G detection

Ertürk G et al., Fab fragments imprinted SPR biosensor for real-time human immunoglobulin G detection.
Biosensors and Bioelectronics, 28, (1), 97-104, (2011)
   

immunoglobulin G (IgG)

Ince GO et al., One-Dimensional Surface-Imprinted Polymeric Nanotubes for Specific Biorecognition by Initiated Chemical Vapor Deposition (iCVD).
ACS Applied Materials & Interfaces, 5, (14), 6447-6452, (2013)
   

Immunoglobulin heavy chain binding protein

Liu DJ et al., Core-shell molecularly imprinted polymer nanoparticles with assistant recognition polymer chains for effective recognition and enrichment of natural low-abundance protein.
Acta Biomaterialia, 10, (2), 769-775, (2014)
   

Immunoglobulins

Schirhagl R et al., Chemosensors for Viruses Based on Artificial Immunoglobulin Copies.
Advanced Materials, 22, (18), 2078-2081, (2010)
   

immunohistochemistry

Proceeding, Bezdekova J et al, Molecularly Imprinted Polymer Nanoparticles as Potential Tool for Immunohistochemistry, 

330-334, (2020)
   

Immuno-like assay

Book chapter, Moreno-Bondi MCet al., Immuno-Like Assays and Biomimetic Microchips, 
In: Molecular Imprinting, Haupt K (Ed.) 
Springer: Berlin / Heidelberg, 111-164, (2012)    

Immuno-like assay

Muzyka K, Current trends in the development of the electrochemiluminescent immunosensors.
Biosensors and Bioelectronics, 54, 393-407, (2014)
   

Immunological stress

Zhang YD et al., Molecularly imprinted gelatin nanoparticles for DNA delivery and in-situ fluorescence imaging of telomerase activity.
Microchimica Acta, 186, (9), Article610-(2019)
   

immunomagnetic separation

Ben Aissa A et al., Magnetic molecularly imprinted polymer for the isolation and detection of biotin and biotinylated biomolecules.
Biosensors and Bioelectronics, 88, 101-108, (2017)
   

Immunoprecipitation

Halvorsen TG et al., Affinity capture in bottom-up protein analysis - Overview of current status of proteolytic peptide capture using antibodies and molecularly imprinted polymers.
Analytica Chimica Acta, 1182, Article338714-(2021)
   

Immunoreaction

Hasanzadeh M et al., Cytosensing of cancer cells using antibody-based molecular imprinting: A short-review.
TrAC Trends in Analytical Chemistry, 99, 129-134, (2018)
   

immuno-sensor

Luppa PB et al., Immunosensors - principles and applications to clinical chemistry.
Clinica Chimica Acta, 314, (1-2), 1-26, (2001)
   

immunosensor

Luppa PB et al., Immunosensors - principles and applications to clinical chemistry.
Clinica Chimica Acta, 314, (1-2), 1-26, (2001)
   

immunosensor

Tan YG et al., A study of a bio-mimetic recognition material for the BAW sensor by molecular imprinting and its application for the determination of paracetamol in the human serum and urine.
Talanta, 55, (2), 337-347, (2001)
   

immunosensor

Trojanowicz M, Determination of pesticides using electrochemical enzymatic biosensors.
Electroanalysis, 14, (19-20), 1311-1328, (2002)
   

immunosensor

Malhotra BD et al., Prospects of conducting polymers in biosensors.
Analytica Chimica Acta, 578, (1), 59-74, (2006)
   

immunosensor

Ramanavicius A et al., Electrochemical sensors based on conducting polymer--polypyrrole.
Electrochimica Acta, 51, (27), 6025-6037, (2006)
   

immunosensor

Prieto-Simón B et al., Emerging biotools for assessment of mycotoxins in the past decade.
TrAC Trends in Analytical Chemistry, 26, (7), 689-702, (2007)
   

immunosensor

Skottrup PD et al., Towards on-site pathogen detection using antibody-based sensors.
Biosensors and Bioelectronics, 24, (3), 339-348, (2008)
   

immunosensor

Singh S et al., Recent trends in development of biosensors for detection of microcystin.
Toxicon, 60, (5), 878-894, (2012)
   

immunosensor

Hasanzadeh M et al., Electrochemical nano-immunosensing of effective cardiac biomarkers for acute myocardial infarction.
TrAC Trends in Analytical Chemistry, 49, 20-30, (2013)
   

immunosensor

Liu SQ et al., Advances in pesticide biosensors: current status, challenges, and future perspectives.
Analytical and Bioanalytical Chemistry, 405, (1), 63-90, (2013)
   

immunosensor

Pundir CS et al., Creatinine sensors.
TrAC Trends in Analytical Chemistry, 50, 42-52, (2013)
   

immunosensor

Ragavan KV et al., Sensors and biosensors for analysis of bisphenol-A.
TrAC Trends in Analytical Chemistry, 52, 248-260, (2013)
   

immunosensor

Thakur MS et al., Biosensors in food processing.
Journal of Food Science and Technology, 50, (4), 625-641, (2013)
   

immunosensor

Zaidi SA, Recent Advancement in Various Electrochemical and Immunosensing Strategies for Detection of Chloramphenicol.
International Journal of Electrochemical Science, 8, (7), 9936-9955, (2013)
   

immunosensor

Akiba U et al., Recent Progress in Electrochemical Biosensors for Glycoproteins.
Sensors, 16, (12), ArticleNo2045-(2016)
   

immunosensor

Chauhan R et al., Recent advances in mycotoxins detection.
Biosensors and Bioelectronics, 81, 532-545, (2016)
   

immunosensor

Alizadeh N et al., Ultrasensitive Bioaffinity Electrochemical Sensors: Advances and New Perspectives.
Electroanalysis, 30, (12), 2803-2840, (2018)
   

immunosensor

Pohanka M, Overview of Piezoelectric Biosensors, Immunosensors and DNA Sensors and Their Applications.
Materials, 11, (3), ArticleNo448-(2018)
   

immunosensor

Lai YX et al., A novel α-fetoprotein-MIP immunosensor based on AuNPs/PTh modified glass carbon electrode.
Chinese Chemical Letters, 30, (1), 160-162, (2019)
   

immunosensors

Luppa PB, Immunosensor technology - Principles and applications.
Laboratoriums Medizin, 25, (9-10), 388-398, (2001)
   

immunosensors

Luppa PB et al., Immunosensors - principles and applications to clinical chemistry.
Clinica Chimica Acta, 314, (1-2), 1-26, (2001)
   

immunosensors

Trojanowicz M, Determination of pesticides using electrochemical enzymatic biosensors.
Electroanalysis, 14, (19-20), 1311-1328, (2002)
   

immunosensors

Trojanowicz M et al., Electrochemical Chiral Sensors and Biosensors.
Electroanalysis, 21, (3-5), 229-238, (2009)
   

immunosensors

Hayat A et al., Recent advances in ochratoxin A-producing fungi detection based on PCR methods and ochratoxin A analysis in food matrices.
Food Control, 26, (2), 401-415, (2012)
   

immunosensors

Yadav SK et al., A review on determination of steroids in biological samples exploiting nanobio-electroanalytical methods.
Analytica Chimica Acta, 762, 14-24, (2013)
   

immunosensors

Capoferri D et al., Affinity Sensing Strategies for the Detection of Pesticides in Food.
Foods, 7, (9), ArticleNo148-(2018)
   

immunosensors

Dhanjai et al., Advances in sensing and biosensing of bisphenols: A review.
Analytica Chimica Acta, 998, 1-27, (2018)
   

Immunosorbent

Haginaka J, Selectivity of affinity media in solid-phase extraction of analytes.
TrAC Trends in Analytical Chemistry, 24, (5), 407-415, (2005)
   

Immunosorbent

Augusto F et al., New materials and trends in sorbents for solid-phase extraction.
TrAC Trends in Analytical Chemistry, 43, 14-23, (2013)
   

Immunosorbent

Fumes BH et al., Recent advances and future trends in new materials for sample preparation.
TrAC Trends in Analytical Chemistry, 71, 9-25, (2015)
   

Immunosorbent

Pichon V et al., Selective tools for the solid-phase extraction of Ochratoxin A from various complex samples: immunosorbents, oligosorbents, and molecularly imprinted polymers.
Analytical and Bioanalytical Chemistry, 408, (25), 6983-6999, (2016)
   

IMMUNOSORBENT-ASSAY

Kist TBL et al., Separation of biomolecules using electrophoresis and nanostructures.
Electrophoresis, 25, (21-22), 3492-3497, (2004)
   

immunosorbents

Pichon V, Environmental sample treatment: Evolution and perspectives.
Analusis, 25, 101-106, (1997)
   

immunosorbents

Masqué N et al., New polymeric and other types of sorbents for solid-phase extraction of polar organic micropollutants from environmental water.
TrAC Trends in Analytical Chemistry, 17, (6), 384-394, (1998)
   

immunosorbents

Ferrer I et al., Validation of new solid-phase extraction materials for the selective enrichment of organic contaminants from environmental samples.
TrAC Trends in Analytical Chemistry, 18, (3), 180-192, (1999)
   

immunosorbents

Pichon V et al., Immunosorbents: natural molecular recognition materials for sample preparation of complex environmental matrices.
TrAC Trends in Analytical Chemistry, 18, (3), 219-235, (1999)
   

immunosorbents

Martín-Esteban A et al., Effect of template size on the selectivity of molecularly imprinted polymers for phenylurea herbicides.
Chromatographia, 53, (Supplement 1), S434-S437, (2001)
   

immunosorbents

Martín-Esteban A, Molecularly imprinted polymers: new molecular recognition materials for selective solid-phase extraction of organic compounds.
Fresenius Journal of Analytical Chemistry, 370, (7), 795-802, (2001)
   

immunosorbents

Prasad BB et al., Determination of diquat herbicide by selective enrichment by column chromatography on imprinted polymer immobilised on silica gel.
Chromatographia, 55, (3-4), 171-176, (2002)
   

immunosorbents

de Alda MJL et al., Liquid chromatography-(tandem) mass spectrometry of selected emerging pollutants (steroid sex hormones, drugs and alkylphenolic surfactants) in the aquatic environment.
Journal of Chromatography A, 1000, (1-2), 503-526, (2003)
   

immunosorbents

Hennion MC et al., Immuno-based sample preparation for trace analysis.
Journal of Chromatography A, 1000, (1-2), 29-52, (2003)
   

immunosorbents

Pyrzynska K, Novel selective sorbents for solid-phase extraction.
Chemia Analityczna, 48, (5), 781-795, (2003)
   

immunosorbents

Zhu LL et al., Selective separation of active inhibitors of epidermal growth factor receptor from Caragana Jubata by molecularly imprinted solid-phase extraction.
Journal of Chromatography A, 991, (2), 151-158, (2003)
   

immunosorbents

Blahova E et al., Approaches in sample handling before HPLC analysis of complex matrices.
Chemical Papers-Chemicke Zvesti, 58, (5), 362-373, (2004)
   

immunosorbents

Chapuis F et al., Retention mechanism of analytes in the solid-phase extraction process using molecularly imprinted polymers - Application to the extraction of triazines from complex matrices.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 93-101, (2004)
   

immunosorbents

Pichon V et al., A dual analytical approach for the selective extraction of organic pollutants in environmental matrices: immunosorbents and molecularly imprinted polymers.
Actualité Chimique, 277-278, 15-26, (2004)
   

immunosorbents

Mmualefe LC et al., Environmental and food sample handling challenges for developing countries.
Toxicological & Environmental Chemistry, 91, (5), 819-835, (2009)
   

immunosorbents

Cruz-Vera M et al., Highly selective and non-conventional sorbents for the determination of biomarkers in urine by liquid chromatography.
Analytical and Bioanalytical Chemistry, 397, (3), 1029-1038, (2010)
   

immunosorbents

Book chapter, Poole CFet al., 2.14 - Principles and Practice of Solid-Phase Extraction, 
In: Comprehensive Sampling and Sample Preparation, Pawliszyn J (Ed.) 
Academic Press: Oxford, 273-297, (2012)    

immunosorbents

Queiroz MEC et al., Selective capillary coating materials for in-tube solid-phase microextraction coupled to liquid chromatography to determine drugs and biomarkers in biological samples: A review.
Analytica Chimica Acta, 826, 1-11, (2014)
   

immunosorbents

Plotka-Wasylka J et al., Modern trends in solid phase extraction: New sorbent media.
TrAC Trends in Analytical Chemistry, 77, 23-43, (2016)
   

immunosorbents

Sorribes-Soriano A et al., Trace analysis by ion mobility spectrometry: From conventional to smart sample preconcentration methods. A review.
Analytica Chimica Acta, 1026, 37-50, (2018)
   

Immunosuppressive

Alaei HS et al., Photoresponsive molecularly imprinted dendrimer-based magnetic nanoparticles for photo-regulated selective separation of azathioprine.
Reactive and Functional Polymers, 136, 58-65, (2019)
   

immuno-ultrafiltration

Cichna-Markl M, New strategies in sample clean-up for mycotoxin analysis.
World Mycotoxin Journal, 4, (3), 203-215, (2011)
   

IMPACT

Hiratani H et al., The nature of backbone monomers determines the performance of imprinted soft contact lenses as timolol drug delivery systems.
Biomaterials, 25, (6), 1105-1113, (2004)
   

IMPACT

Malaisamy R et al., Evaluation of molecularly imprinted polymer blend filtration membranes under solid phase extraction conditions.
Separation and Purification Technology, 39, (3), 211-219, (2004)
   

IMPACT

Navarro-Villoslada F et al., Application of multivariate analysis to the screening of molecularly imprinted polymers for bisphenol A.
Analytica Chimica Acta, 504, (1), 149-162, (2004)
   

Impedance

Guiochon G, Monolithic columns in high-performance liquid chromatography.
Journal of Chromatography A, 1168, (1-2), 101-168, (2007)
   

Impedance

Namvar A et al., Microbial imprinted polypyrrole/poly(3-methylthiophene) composite films for the detection of Bacillus endospores.
Biosensors and Bioelectronics, 22, (9-10), 2018-2024, (2007)
   

Impedance

Gupta G et al., Molecularly imprinted polymer for the recognition of biological warfare agent staphylococcal enterotoxin B based on Surface Plasmon Resonance.
Thin Solid Films, 519, (3), 1115-1121, (2010)
   

Impedance

Gupta G et al., Supersensitive detection of T-2 toxin by the in situ synthesized π-conjugated molecularly imprinted nanopatterns. An in situ investigation by surface plasmon resonance combined with electrochemistry.
Biosensors and Bioelectronics, 26, (5), 2534-2540, (2011)
   

Impedance

Proceeding, Broeders J et al, Embedded Unit for Point-of-Care Impedance Based Biosensor Readout, 

1571-1577, (2012)
   

Impedance

Proceeding, Afsarimanesh N et al, Development of molecular imprinted polymer interdigital sensor for C-terminal telopeptide of type I collagen, 

1-5, (2016)
   

Impedance

Nikitina VN et al., Molecular imprinting of boronate functionalized polyaniline for enzyme-free selective detection of saccharides and hydroxy acids.
Sensors and Actuators B: Chemical, 246, 428-433, (2017)
   

Impedance

Afsarimanesh N et al., Development of IoT-Based Impedometric Biosensor for Point-of-Care Monitoring of Bone Loss.
IEEE Journal on Emerging and Selected Topics in Circuits and Systems, 8, (2), 211-220, (2018)
   

Impedance

Elshafey R et al., Electrochemical impedance sensor for herbicide alachlor based on imprinted polymer receptor.
Journal of Electroanalytical Chemistry, 813, 171-177, (2018)
   

Impedance

Ertugrul Uygun HD et al., Non-invasive cortisol detection in saliva by using molecularly cortisol imprinted fullerene-acrylamide modified screen printed electrodes.
Talanta, 206, Article120225-(2020)
   

Impedance sensor

Yang C et al., Molecularly imprinted polymer based sensor directly responsive to attomole bovine serum albumin.
Talanta, 196, 402-407, (2019)
   

Impedance sensor

Yang C et al., An ultra sensitive and selective impedance sensor based on protein-imprinted polymer.
Sensors and Actuators B: Chemical, 282, 818-823, (2019)
   

impedance spectroscopy

Lahav M et al., Imprinting of chiral molecular recognition sites in thin TiO2 films associated with field-effect transistors: Novel functionalized devices for chiroselective and chirospecific analyses.
Chemistry - A European Journal, 7, (18), 3992-3997, (2001)
   

impedance spectroscopy

Pogorelova SP et al., Selective sensing of triazine herbicides in imprinted membranes using ion-sensitive field-effect transistors and microgravimetric quartz crystal microbalance measurements.
Analyst, 127, (11), 1484-1491, (2002)
   

impedance spectroscopy

Pogorelova SP et al., Development of ion-sensitive field-effect transistor-based sensors for benzylphosphonic acids and thiophenols using molecularly imprinted TiO2 films.
Analytica Chimica Acta, 504, (1), 113-122, (2004)
   

impedance spectroscopy

Thoelen R et al., A MIP-based impedimetric sensor for the detection of low-MW molecules.
Biosensors and Bioelectronics, 23, (6), 913-918, (2008)
   

impedance spectroscopy

Horemans F et al., MIP-based sensor platforms for the detection of histamine in the nano- and micromolar range in aqueous media.
Sensors and Actuators B: Chemical, 148, (2), 392-398, (2010)
   

impedance spectroscopy

Broeders J et al., Miniaturised eight-channel impedance spectroscopy unit as sensor platform for biosensor applications.
physica status solidi (a), 208, (6), 1357-1363, (2011)
   

impedance spectroscopy

Alizadeh T, Application of electrochemical impedance spectroscopy and conventional rebinding experiments for the investigation of recognition characteristic of bulky and nano-sized imprinted polymers.
Materials Chemistry and Physics, 135, (2-3), 1012-1023, (2012)
   

impedance spectroscopy

Peeters M et al., MIP-based biomimetic sensor for the electronic detection of serotonin in human blood plasma.
Sensors and Actuators B: Chemical, 171-172, 602-610, (2012)
   

impedance spectroscopy

Broeders J et al., Mobile application for impedance based biomimetic sensor readout.
IEEE Sensors Journal, 13, (7), 2659-2665, (2013)
   

impedance spectroscopy

Peeters M et al., Heat-transfer-based detection of l-nicotine, histamine, and serotonin using molecularly imprinted polymers as biomimetic receptors.
Analytical and Bioanalytical Chemistry, 405, (20), 6453-6460, (2013)
   

impedance spectroscopy

Zia AI et al., Rapid and molecular selective electrochemical sensing of phthalates in aqueous solution.
Biosensors and Bioelectronics, 67, 342-349, (2015)
   

impedance spectroscopy

Sajini T et al., Tailoring of photo-responsive molecularly imprinted polymers on multiwalled carbon nanotube as an enantioselective sensor and sorbent for L-PABE.
Composites Science and Technology, 181, Article107676-(2019)
   

impedance spectroscopy

Stilman W et al., Detection of yeast strains by combining surface-imprinted polymers with impedance-based readout.
Sensors and Actuators B: Chemical, 340, Article129917-(2021)
   

Impedimetric analysis

Li X et al., Impedimetric Enzyme-Free Detection of Glucose via a Computation-Designed Molecularly Imprinted Electrochemical Sensor Fabricated on Porous Ni Foam.
Electroanalysis, 29, (5), 1243-1251, (2017)
   

Impedimetric analysis

Isik D et al., Electrochemical impedimetric detection of kanamycin using molecular imprinting for food safety.
Microchemical Journal, 160, Article105713-(2021)
   

Impedimetric analysis

Choi DY et al., Optimization and characterization of electrochemical protein Imprinting on hemispherical porous gold patterns for the detection of trypsin.
Sensors and Actuators B: Chemical, 350, Article130855-(2022)
   

impedimetric chemosensor

Ayerdurai V et al., Selective Impedimetric Chemosensing of Carcinogenic Heterocyclic Aromatic Amine in Pork by dsDNA-Mimicking Molecularly Imprinted Polymer Film-Coated Electrodes.
Journal of Agricultural and Food Chemistry, 69, (48), 14689-14698, (2021)
   

Impedimetric detection

Shahdost-Fard F et al., Impedimetric detection of trinitrotoluene by using a glassy carbon electrode modified with a gold nanoparticle@fullerene composite and an aptamer-imprinted polydopamine.
Microchimica Acta, 184, (10), 3997-4006, (2017)
   

Impedimetric detection

Roushani M et al., Impedimetric ultrasensitive detection of chloramphenicol based on aptamer MIP using a glassy carbon electrode modified by 3-ampy-RGO and silver nanoparticle.
Colloids and Surfaces B: Biointerfaces, 183, Article110451-(2019)
   

IMPEDIMETRIC IMMUNOSENSOR

Yin F, Capacitive sensors using electropolymerized o-phenylenediamine film doped with ion-pair complex as selective elements for the determination of pentoxyverine.
Talanta, 63, (3), 641-646, (2004)
   

IMPEDIMETRIC IMMUNOSENSOR

Karami P et al., Dual-modality impedimetric immunosensor for early detection of prostate-specific antigen and myoglobin markers based on antibody-molecularly imprinted polymer.
Talanta, 202, 111-122, (2019)
   

impedimetric micro-sensor

Zouaoui F et al., Experimental Study and Mathematical Modeling of a Glyphosate Impedimetric Microsensor Based on Molecularly Imprinted Chitosan Film.
Chemosensors, 8, (4), ArticleNo104-(2020)
   

Impedimetric Sensor

Proceeding, Betatache A et al, Molecular Imprinted Poly(Ethyleneco-Vinyl Alcohol) Nanofibers Electrospun on Gold Electrodes for Impedimetric Creatinine Sensing, 
In: Key Engineering Materials, Hristoforou E, Vlachos DS (Eds.), 
84-88, (2013)
   

Impedimetric Sensor

Proceeding, Lagarde F, MIP-Based Impedimetric Sensors, 
In: Key Engineering Materials, Hristoforou E, Vlachos DS (Eds.), 
499-502, (2013)
   

Impedimetric Sensor

Uygun ZO et al., A novel impedimetric sensor based on molecularly imprinted polypyrrole modified pencil graphite electrode for trace level determination of chlorpyrifos.
Sensors and Actuators B: Chemical, 188, 78-84, (2013)
   

Impedimetric Sensor

Bakas I et al., Electrochemical impedimetric sensor based on molecularly imprinted polymers/sol-gel chemistry for methidathion organophosphorous insecticide recognition.
Talanta, 130, 294-298, (2014)
   

Impedimetric Sensor

Shamsipur M et al., Coupled electrochemical-chemical procedure used in construction of molecularly imprinted polymer-based electrode: a highly sensitive impedimetric melamine sensor.
Journal of Solid State Electrochemistry, 22, (1), 169-180, (2018)
   

Impedimetric Sensor

Yaman YT et al., Molecularly imprinted label-free sensor platform for impedimetric detection of 3-monochloropropane-1,2-diol.
Sensors and Actuators B: Chemical, 328, Article128986-(2021)
   

impedimetric sensors

Book chapter, Uygun ZOet al., Molecularly Imprinted Sensors - New Sensing Technologies, 
In: Biosensors - Micro and Nanoscale Applications, Rinken T (Ed.) 
InTech: 85-108, (2015)    

Impeller

Lee JS et al., Preparation of D-phenylalanine imprinted microbeads by the modified suspension polymerization using a magnetic impeller.
Korean Journal of Chemical Engineering, 26, (2), 453-456, (2009)
   

imperialist competitive algorithm

Khajeh M et al., Application of the artificial neural network and imperialist competitive algorithm for optimization of molecularly imprinted solid phase extraction of methylene blue.
E-Polymers, 16, (3), 243-253, (2016)
   

implant material

Boeckl MS et al., Template-assisted nano-patterning of solid surfaces.
Biopolymers, 47, (2), 185-193, (1998)
   

Impregnation

Duarte ARC et al., Supercritical fluid polymerisation and impregnation of molecularly imprinted polymers for drug delivery.
Journal of Supercritical Fluids, 39, (1), 102-106, (2006)
   

Impregnation medium

Song H et al., The role of impregnation medium on the activity of ceria-supported cobalt catalysts for ethanol steam reforming.
Journal of Molecular Catalysis A: Chemical, 318, (1-2), 21-29, (2010)
   

Impression 2D de surface

Hillberg AL et al., Biomolecule imprinting: Developments in mimicking dynamic natural recognition systems.
IRBM, 29, (2-3), 89-104, (2008)
   

imprint

Anon, Tailor-made compounds predicted by Pauling.
Chemical & Engineering News, 27, (13), 913-913, (1949)
   

imprint

Rackow B et al., Imprinting of molecular information on resin surfaces and testing of a multidentate imprint with monodentate "guest." XXII.
Zeitschrift für Chemie, 7, (11), 444-445, (1967)
   

imprint

Proceeding, Rackow B et al, In vitro experiments to impinge molecular folding information on organic polymers., 
Drischel H (Ed.), 
246-249, (1968)
   

imprint

Andersson L, Preparation of amino-acid ester-selective cavities formed by non-covalent imprinting with a substrate in highly cross-linked polymers.
Reactive Polymers, Ion Exchangers, Sorbents, 9, (1), 29-41, (1988)
   

imprint

Kuchen W et al., Metal-ion-selective exchange resins by matrix imprint with methacrylates.
Angewandte Chemie International Edition, 27, (12), 1695-1697, (1988)
   

imprint

O’Shannessy DJ et al., Molecular recognition in synthetic polymers. Enantiomeric resolution of amide derivatives of amino acids on molecularly imprinted polymers.
Journal of Molecular Recognition, 2, (1), 1-5, (1989)
   

imprint

O’Shannessy DJ et al., Recent advances in the preparation and use of molecularly imprinted polymers for enantiomeric resolution of amino-acid derivatives.
Journal of Chromatography, 470, (2), 391-399, (1989)
   

imprint

Andersson LI et al., Molecular recognition in synthetic-polymers - preparation of chiral stationary phases by molecular imprinting of amino-acid amides.
Journal of Chromatography A, 513, (1), 167-179, (1990)
   

imprint

Andersson LI et al., Enantiomeric resolution of amino-acid derivatives on molecularly imprinted polymers as monitored by potentiometric measurements.
Journal of Chromatography A, 516, (2), 323-331, (1990)
   

imprint

Wulff G et al., Polymers with enzyme-analogous structures .28. Measuring the optical- activity of chiral imprints in insoluble highly cross-linked polymers.
Angewandte Chemie International Edition, 29, (6), 684-686, (1990)
   

imprint

Rosatzin T et al., Preparation of Ca2+ selective sorbents by molecular imprinting using polymerizable ionophores.
Journal of the Chemical Society-Perkin Transactions 2, (8), 1261-1265, (1991)
   

imprint

Kempe M et al., Chiral separation using molecularly imprinted heteroatomic polymers.
Journal of Molecular Recognition, 6, (1), 25-29, (1993)
   

imprint

Ramström O et al., Recognition sites incorporating both pyridinyl and carboxy functionalities prepared by molecular imprinting.
Journal of Organic Chemistry, 58, (26), 7562-7564, (1993)
   

imprint

Flam F, Molecular imprints make a mark.
Science, 263, (5151), 1221-1222, (1994)
   

imprint

Mayes AG et al., Sugar binding polymers showing high anomeric and epimeric discrimination obtained by noncovalent molecular imprinting.
Analytical Biochemistry, 222, (2), 483-488, (1994)
   

imprint

Heilmann J et al., Problems in selective catalysis with molecular imprints in silica - selective lactones formation from hydroxyesters in micropores.
Zeitschrift Fur Naturforschung Section B-A Journal Of Chemical Sciences, 50, 460-468, (1995)
   

imprint

Plunkett SD et al., Molecularly imprinted polymers on silica: selective supports for high-performance ligand-exchange chromatography.
Journal of Chromatography A, 708, (1), 19-29, (1995)
   

imprint

Welch CJ, Imprintable brush-type chiral stationary-phase.
Journal of Chromatography A, 689, (2), 189-193, (1995)
   

imprint

Book chapter, Andersson LIet al., Molecular Imprinting: The current status and future development of polymer-based recognition systems, 
In: Biochemical Technology, Part B, Bittar EE, Danielsson B, Bulow L (Eds.) 
Elsevier: Amsterdam, 651-670, (1996)    

imprint

Andersson LI et al., Molecular imprinting of the endogenous neuropeptide Leu(5)-enkephalin and some derivatives thereof.
Macromolecular Rapid Communications, 17, (1), 65-71, (1996)
   

imprint

Ramström O et al., Chiral recognition in adrenergic receptor binding mimics prepared by molecular imprinting.
Journal of Molecular Recognition, 9, (5-6), 691-696, (1996)
   

imprint

Siemann M et al., Selective recognition of the herbicide atrazine by noncovalent molecularly imprinted polymers.
Journal of Agricultural and Food Chemistry, 44, (1), 141-145, (1996)
   

imprint

Venn RF et al., Making an impression: Synthesis and use of molecular imprints of a development compound.
European Journal of Pharmaceutical Sciences, 4, (Suppl.), S49-S49, (1996)
   

imprint

Wang HY et al., Molecular imprint membranes prepared by the phase inversion precipitation technique.
Langmuir, 12, (20), 4850-4856, (1996)
   

imprint

Andersson LI et al., A highly selective solid phase extraction sorbent for pre-concentration of sameridine made by molecular imprinting.
Chromatographia, 46, (1-2), 57-62, (1997)
   

imprint

Bengtsson H et al., Molecular imprint based radioassay for direct determination of S-propranolol in human plasma.
Analytical Communications, 34, (9), 233-235, (1997)
   

imprint

Book chapter, Dickert FLet al., SAW and QMB for chemical sensing, 
In: Proceedings of the 1997 IEEE International Frequency Control Symposium, 
IEEE: New York, 120-123, (1997)    

imprint

Herrmann W et al., Supramolecular control of the photochemistry of stilbenes by cyclodextrins.
Chemical Communications, (18), 1709-1710, (1997)
   

imprint

Kobayashi T et al., Molecular imprinted membranes having a cross-linked gel layer prepared by photograft polymerization.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 28-28, (1997)
   

imprint

Martin P et al., Evaluation of a molecular-imprinted polymer for use in the solid phase extraction of propranolol from biological fluids.
Analytical Communications, 34, (2), 45-47, (1997)
   

imprint

Schweitz L et al., Capillary electrochromatography with molecular imprint-based selectivity for enantiomer separation of local anaesthetics.
Journal of Chromatography A, 792, (1-2), 401-409, (1997)
   

imprint

Wang HY et al., Molecular imprint membranes prepared by the phase inversion precipitation technique .2. Influence of coagulation temperature in the phase inversion process on the encoding in polymeric membranes.
Langmuir, 13, (20), 5396-5400, (1997)
   

imprint

Wilson GS, Making an imprint on blood glucose monitoring.
Nature Biotechnology, 15, (4), 322-322, (1997)
   

imprint

Wulff G, Molecular imprinting in polymers - New opportunities in separation and catalysis.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 96-96, (1997)
   

imprint

Yoshida M et al., A novel bifunctional organophosphorus monomer for metal ion-imprinted polymers by surface template polymerization.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 25-25, (1997)
   

imprint

Andersson HS et al., Crown ethers as a tool for the preparation of molecularly imprinted polymers.
Journal of Molecular Recognition, 11, (1-6), 103-106, (1998)
   

imprint

Dickert FL et al., Molecular imprinting in chemical sensing - Detection of aromatic and halogenated hydrocarbons as well as polar solvent vapors.
Fresenius Journal of Analytical Chemistry, 360, (7/8), 759-762, (1998)
   

imprint

Proceeding, Dickert FL et al, Molecular imprints as artificial antibodies - A new generation of chemical sensors, 

281-283, (1998)
   

imprint

Kobayashi T et al., Molecular imprint membranes of polyacrylonitrile copolymers with different acrylic acid segments.
Analytica Chimica Acta, 365, (1-3), 81-88, (1998)
   

imprint

Olsen J et al., Molecular imprints as sorbents for solid phase extraction: potential and applications.
Analytical Communications, 35, (10), H13-H14, (1998)
   

imprint

Schweitz L et al., Molecular imprint-based stationary phases for capillary electrochromatography.
Journal of Chromatography A, 817, (1-2), 5-13, (1998)
   

imprint

Suedee R et al., Thin-layer chromatography using synthetic polymers imprinted with quinine as chiral stationary phase.
Jpc-Journal Of Planar Chromatography-Modern Tlc, 11, 272-276, (1998)
   

imprint

Tan ZXJ et al., Molecular imprint polymers as highly selective stationary phases for open tubular liquid chromatography and capillary electrochromatography.
Electrophoresis, 19, (12), 2055-2060, (1998)
   

imprint

Book chapter, Venn RFet al., Synthesis and properties of molecular imprints of darifenacin - does molecular imprinting have a future in ultra-trace bioanalysis?, 
In: Drug-development assay approaches including molecular imprinting and biomarkers, Reid E, Hill HM, Wilson ID (Eds.) 
Royal Society of Chemistry: 13-20, (1998)    

imprint

Barceló D, Molecular imprints for solid-phase extraction and sensors.
TrAC Trends in Analytical Chemistry, 18, (3), 137-137, (1999)
   

imprint

Dai S et al., Imprint coating: Novel synthesis of selective functionalized ordered mesoporous sorbents.
Abstracts of Papers of the American Chemical Society, 217, (IEC), 234-234, (1999)
   

imprint

Dai S et al., Imprint coating: A novel synthesis of selective functionalized ordered mesoporous sorbents.
Angewandte Chemie International Edition, 38, (9), 1235-1239, (1999)
   

imprint

Ensing K et al., Tailor-made materials for tailor-made applications: application of molecular imprints in chemical analysis.
TrAC Trends in Analytical Chemistry, 18, (3), 138-145, (1999)
   

imprint

Hage DS, Affinity chromatography: A review of clinical applications.
Clinical Chemistry, 45, (5), 593-615, (1999)
   

imprint

Hunnius M et al., Selective surface adsorption versus imprinting in amorphous microporous silicas.
Microporous And Mesoporous Materials, 29, (3), 389-403, (1999)
   

imprint

Joly C et al., Residual solvent effect on the permeation properties of fluorinated polyimide films.
Separation and Purification Technology, 16, 47-54, (1999)
   

imprint

Joshi VP et al., Effect of solvents on selectivity in separation using molecularly imprinted adsorbents: Separation of phenol and bisphenol A.
Industrial & Engineering Chemistry Research, 38, (11), 4417-4423, (1999)
   

imprint

Joshi VP et al., Molecularly imprinted adsorbents for positional isomer separation.
Journal of Chromatography A, 849, (2), 319-330, (1999)
   

imprint

Ju JY et al., Binding properties of an aminostyrene-based polymer imprinted with glutamylated monascus pigments.
Biotechnology Techniques, 13, (10), 665-669, (1999)
   

imprint

Meier W, Template polymerization: Structure control at the nanometer level.
Chimia, 53, (5), 214-215, (1999)
   

imprint

Olsen J et al., Methodology for assessing the properties of molecular imprinted polymers for solid phase extraction.
Analyst, 124, (4), 467-471, (1999)
   

imprint

Yoshida M et al., Metal ion imprinted microsphere prepared by surface molecular imprinting technique using water-in-oil-in-water emulsions.
Journal of Applied Polymer Science, 73, (7), 1223-1230, (1999)
   

imprint

Herm M et al., Towards synthetic adrenaline receptors.
Chemistry - A European Journal, 6, (1), 47-53, (2000)
   

imprint

Iqbal SS et al., Artificial receptors: molecular imprints discern closely related toxins.
Materials Science & Engineering C-Biomimetic And Supramolecular Systems, 7, 77-81, (2000)
   

imprint

Katz A et al., Molecular imprinting of bulk, microporous silica.
Nature, 403, (6767), 286-289, (2000)
   

imprint

Lulka MF et al., Molecular imprinting of Ricin and its A and B chains to organic silanes: fluorescence detection.
Materials Science & Engineering C-Biomimetic And Supramolecular Systems, 11, (2), 101-105, (2000)
   

imprint

Markowitz MA et al., Catalytic silica particles via template-directed molecular imprinting.
Langmuir, 16, (4), 1759-1765, (2000)
   

imprint

Martin P et al., Optimisation of procedures for the extraction of structural analogues of propranolol with molecular imprinted polymers for sample preparation.
Journal of Chromatography A, 889, (1-2), 143-147, (2000)
   

imprint

Shi HQ et al., Template recognition of protein-imprinted polymer surfaces.
Journal of Biomedical Materials Research, 49, (1), 1-11, (2000)
   

imprint

Suedee R et al., Evaluation of matrices containing molecularly imprinted polymers in the enantioselective-controlled delivery of b-blockers.
Journal of Controlled Release, 66, (2-3), 135-147, (2000)
   

imprint

Vallano PT et al., Highly selective separations by capillary electrochromatography: molecular imprint polymer sorbents.
Journal of Chromatography A, 887, (1-2), 125-135, (2000)
   

imprint

Vallano PT et al., Affinity screening by packed capillary high-performance liquid chromatography using molecular imprinted sorbents I. Demonstration of feasibility.
Journal of Chromatography A, 888, (1-2), 23-34, (2000)
   

imprint

Wizeman W et al., Glucose specific polymeric molecular imprints.
Abstracts of Papers of the American Chemical Society, 220, (OLY), 45-45, (2000)
   

imprint

Yoshida M et al., Metal-imprinted microsphere prepared by surface template polymerization and its application to chromatography.
Journal of Polymer Science Part A: Polymer Chemistry, 38, (4), 689-696, (2000)
   

imprint

Brüggemann O, Chemical reaction engineering using molecularly imprinted polymeric catalysts.
Analytica Chimica Acta, 435, (1), 197-207, (2001)
   

imprint

Chen WY et al., Molecular recognition in imprinted polymers: thermodynamic investigation of analyte binding using microcalorimetry.
Journal of Chromatography A, 923, (1-2), 1-6, (2001)
   

imprint

Dai S, Hierarchically imprinted sorbents.
Chemistry - A European Journal, 7, (4), 763-768, (2001)
   

imprint

Khasawneh MA et al., Affinity screening by packed capillary high performance liquid chromatography using molecular imprinted sorbents II. Covalent imprinted polymers.
Journal of Chromatography A, 922, (1-2), 87-97, (2001)
   

imprint

Markowitz MA et al., Surface-imprinted silica particles: the effects of added organosilanes on catalytic activity.
Analytica Chimica Acta, 435, (1), 177-185, (2001)
   

imprint

Martin PD et al., An unexpected selectivity of a propranolol-derived molecular imprint for tamoxifen.
Analyst, 126, (6), 757-759, (2001)
   

imprint

Nicholls IA et al., Can we rationally design molecularly imprinted polymers?
Analytica Chimica Acta, 435, (1), 9-18, (2001)
   

imprint

Nickel AML et al., Imprinted poly(acrylic acid) films on cadmium selenide. A composite sensor structure that couples selective amine binding with semiconductor substrate photoluminescence.
Chemistry of Materials, 13, (4), 1391-1397, (2001)
   

imprint

Smarsly B et al., Preparation of porous silica materials via sol-gel nanocasting of nonionic surfactants: A mechanistic study on the self-aggregation of amphiphiles for the precise prediction of the mesopore size.
Journal of Physical Chemistry B, 105, (43), 10473-10483, (2001)
   

imprint

Yoshikawa M et al., Recognition and selective transport of nucleic acid components through molecularly imprinted polymeric membranes.
Macromolecular Materials And Engineering, 286, (1), 52-59, (2001)
   

imprint

Ansell RJ, MIP-ligand binding assays (pseudo-immunoassays).
Bioseparation, 10, (6), 365-377, (2002)
   

imprint

Disalvo D et al., Catalytic epoxidations of styrene using a manganese functionalized polymer.
Reactive and Functional Polymers, 53, (2-3), 103-112, (2002)
   

imprint

Han M et al., Generation of molecular recognition sites using emulsion polymerization on porous membranes.
Abstracts of Papers of the American Chemical Society, 224, (COLL), U445-U446, (2002)
   

imprint

Proceeding, Kamiya Y et al, Optical resolution of chrysanthemic acid derivatives on cellulose and amylose columns, 
In: Polymer Preprints, Japan, 
1513, (2002)
   

imprint

Kirchner R et al., Calorimetric investigation of chiral recognition processes in a molecularly imprinted polymer.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 43, (3-4), 279-283, (2002)
   

imprint

Kochkodan V et al., Molecularly imprinted composite membranes for selective binding of desmetryn from aqueous solutions.
Desalination, 149, (1-3), 323-328, (2002)
   

imprint

Proceeding, Kondo F et al, Molecular design of hydrogel catalyst for hydrolysis -Attempt to molecular imprinting in water-, 
In: Polymer Preprints, Japan, 
1429, (2002)
   

imprint

Lehmann M et al., Selective separations and hydrodynamic studies: a new approach using molecularly imprinted nanosphere composite membranes.
Desalination, 149, (1-3), 315-321, (2002)
   

imprint

Llusar M et al., Templated growth of alumina-based fibers through the use of anthracenic organogelators.
Chemistry of Materials, 14, (12), 5124-5133, (2002)
   

imprint

O’Brien TP et al., Evaluation of the origins of the selectivity of polymers imprinted with a HIV protease inhibitor using infrared spectroscopy and high performance liquid chromatography.
Enantiomer, 7, (2-3), 139-148, (2002)
   

imprint

Proceeding, Ohta M et al, Recognition characteristics and fabrications of molecular imprint sites for bisphenol A targets by using photografting template polymerization, 
In: Polymer Preprints, Japan, 
1670, (2002)
   

imprint

Schweitz L et al., Molecularly imprinted CEC sorbents: investigations into polymer preparation and electrolyte composition.
Analyst, 127, (1), 22-28, (2002)
   

imprint

Tsunemori H et al., Surface imprinting polymers for the recognition of nucleotides.
Bioseparation, 10, (6), 315-321, (2002)
   

imprint

Zhang ZT et al., Fabrication of organic-inorganic nanocomposites via molecular imprinting on layered silicate.
Abstracts of Papers of the American Chemical Society, 223, (INOR), 054-054, (2002)
   

imprint

Becker JJ et al., Imprinting chiral information into rigidified dendrimers.
Organometallics, 22, (24), 4984-4998, (2003)
   

imprint

Daniel S et al., Synthesis of imprinted polymer material with palladium ion nanopores and its analytical application.
Analytica Chimica Acta, 488, (2), 173-182, (2003)
   

imprint

Dickert FL et al., Nano- and micro-structuring of sensor materials - from molecule to cell detection.
Synthetic Metals, 138, (1-2), 65-69, (2003)
   

imprint

Dujardin E et al., Synthesis of mesoporous silica by sol-gel mineralisation of cellulose nanorod nematic suspensions.
Journal of Materials Chemistry, 13, (4), 696-699, (2003)
   

imprint

Fishman A et al., Bio-imprinting of lipases with fatty acids.
Journal of Molecular Catalysis B: Enzymatic, 22, (3-4), 193-202, (2003)
   

imprint

Friboulet A, From enzymes to new biocatalysts: Towards new therapeutic strategies.
Actualité Chimique, (11-12), 15-19, (2003)
   

imprint

Book chapter, Kobayashi Tet al., Molecularly imprinted membranes having amphiphilic scaffold media for target molecule recognition, 
In: Membranes-Preparation, Properties and Applications, Burganos VN, Noble RD, Asaeda M, Ayral A, Le Roux JD (Eds.) 
Materials Research Society: Warrendale, 39-43, (2003)    

imprint

Martin PD et al., Comparison of normal and reversed-phase solid phase extraction methods for extraction of b-blockers from plasma using molecularly imprinted polymers.
Analyst, 128, (4), 345-350, (2003)
   

imprint

Sobhi DJ et al., Synthesis of imprinted polymer material with palladium ion nanopores and its analytical application.
Analytica Chimica Acta, 488, (2), 173-182, (2003)
   

imprint

van Hout MWJ et al., Ion suppression in the determination of clenbuterol in urine by solid-phase extraction atmospheric pressure chemical ionisation ion-trap mass spectrometry.
Rapid Communications In Mass Spectrometry, 17, (3), 245-250, (2003)
   

imprint

Zimmerman SC et al., Monomolecular imprinting: Synthetic hosts via molecular imprinting inside of dendrimers.
Abstracts of Papers of the American Chemical Society, 226, (POLY), 479-479, (2003)
   

imprint

Zuo XB et al., Molecularly imprinted polymers for the specific rebinding of macrocyclic metal complexes via non-covalent interactions.
Abstracts of Papers of the American Chemical Society, 225, (NUCL), 26-26, (2003)
   

imprint

Cai WS et al., Molecularly-imprinted polymers selective for tetracycline binding.
Separation and Purification Technology, 35, (3), 215-221, (2004)
   

imprint

Cormack PAG et al., Molecularly imprinted polymers: synthesis and characterisation.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 173-182, (2004)
   

imprint

Dickert FL et al., Modifying polymers by self-organisation for the mass-sensitive detection of environmental and biogeneous analytes.
Sensors and Actuators B: Chemical, 100, (1-2), 112-116, (2004)
   

imprint

El-Toufaili FA et al., Screening combinatorial libraries of molecularly imprinted polymer films casted on membranes in single-use membrane modules.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 135-139, (2004)
   

imprint

Hua F et al., Polymer imprint lithography with molecular-scale resolution.
Nano Letters, 4, (12), 2467-2471, (2004)
   

imprint

Kala R et al., Preconcentrative separation of erbium from Y, Dy, Ho, Tb and Tm by using ion imprinted polymer particles via solid phase extraction.
Analytica Chimica Acta, 518, (1-2), 143-150, (2004)
   

imprint

Kist TBL et al., Separation of biomolecules using electrophoresis and nanostructures.
Electrophoresis, 25, (21-22), 3492-3497, (2004)
   

imprint

Liu CY et al., An insight into molecularly imprinted polymers for capillary electrochromatography.
Electrophoresis, 25, (23-24), 3997-4007, (2004)
   

imprint

Metilda P et al., Influence of binary/ternary complex of imprint ion on the preconcentration of uranium(VI) using ion imprinted polymer materials.
Analytica Chimica Acta, 512, (1), 63-73, (2004)
   

imprint

Motherwell WB et al., A study of some molecularly imprinted polymers as protic catalysts for the isomerisation of a-pinene oxide to trans-carveol.
Tetrahedron, 60, (14), 3231-3241, (2004)
   

imprint

Nishikawa T et al., Nano imprinting of a protein assembly on metal surface.
Biophysical Journal, 86, (1), 161A-161A, (2004)
   

imprint

Olwill A et al., The use of molecularly imprinted sol-gels in pharmaceutical separations.
Biosensors and Bioelectronics, 20, (6), 1045-1050, (2004)
   

imprint

Proceeding, Snowden EM et al, The removal of mousy off-flavour from wine using molecular imprint technology, 
Blair RJ, Williams PJ, Pretorius IS (Eds.), 
301-302, (2004)
   

imprint

Szumski M et al., Molecularly imprinted polymers: A new tool for separation of steroid isomers.
Journal of Separation Science, 27, (10-11), 837-842, (2004)
   

imprint

Zimmerman SC et al., Synthetic hosts via molecular imprinting - are universal synthetic antibodies realistically possible?
Chemical Communications, (1), 5-14, (2004)
   

imprint

Xiao L et al., Preparation of surface ion imprinting magnetic chitosan nanoparticles and adsorption of Cu(II) ions.
Ion Exchange and Adsorption, 24, (3), 193-199, (2008)
   

imprint

Melde BJ et al., Mesoporous materials in sensing: morphology and functionality at the meso-interface.
Analytical and Bioanalytical Chemistry, 398, (4), 1565-1573, (2010)
   

imprint

Jiang Y et al., Synthesis and selective recognition property of Ni2+-imprinted microporous polymer beads.
Polymers for Advanced Technologies, 24, (8), 747-751, (2013)
   

imprint

Zeng HJ et al., A molecule-imprinted polyaniline membrane modified on carbon fiber for detection of glycine.
Bio-Medical Materials and Engineering, 24, (1), 1085-1091, (2014)
   

imprint1a

Patrikeev V et al., Some biological properties of specifically formed silica.
Doklady Akademii Nauk SSSR, 146, 707-709, (1962)
   

Imprinted

Nicholls C et al., Displacement imprinted polymer receptor analysis (DIPRA) for chlorophenolic contaminants in drinking water and packaging materials.
Biosensors and Bioelectronics, 21, (7), 1171-1177, (2006)
   

Imprinted

Mazloum-Ardakani M et al., Preparation of Cu (II) imprinted polymer electrode and its application for potentiometric and voltammetric determination of Cu (II).
Journal of the Iranian Chemical Society, 11, (1), 257-262, (2014)
   

Imprinted

Meshur B et al., In-Situ Synthesized Myoglobin Imprinted Poly(N-Isopropylacrylamide)/Silica Nanocomposite Gels by Using the Molecular Imprinting Method.
Advances in Material Physics & Chemistry, 4, 1-5, (2014)
   

Imprinted

Qaddafi M et al., Imprinted Nickel-Cobalt Chitosan as a Specific Adsorbent of Nickel (Ni2+) and Cobalt (Co2+).
International Journal ofScientific and Technology Research, 3, (9), 37-42, (2014)
   

Imprinted

Mahmoud GA et al., Radiation synthesis of imprinted hydrogels for selective metal ions adsorption.
Desalination and Water Treatment, 57, (35), 16540-16551, (2016)
   

Imprinted

Lach P et al., Molecularly Imprinted Polymer Chemosensor for Selective Determination of an N-Nitroso-l-proline Food Toxin.
Chemistry - A European Journal, 23, (8), 1942-1949, (2017)
   

Imprinted

Yang XC et al., Preparation of magnetic imprinted graphene oxide composite for catalytic degradation of Congo red under dark ambient condition.
Water Science & Technology, 76, (7), 1676-1686, (2017)
   

Imprinted

Tang W et al., Novel controllable hydrophilic thermo-responsive molecularly imprinted resin adsorbent prepared in water for selective recognition of alkaloids by thermal-assisted dispersive solid phase extraction.
Journal of Pharmaceutical and Biomedical Analysis, 160, 386-396, (2018)
   

Imprinted

Zhang T et al., Targeted Live Cell Raman Imaging and Visualization of Cancer Biomarkers with Thermal-Stimuli Responsive Imprinted Nanoprobes.
Particle & Particle Systems Characterization, 35, (12), Article1800390-(2018)
   

Imprinted

Yang H et al., Synthesis of imprinted amino-functionalized mesoporous silica and their selective adsorption performance of Pb2+, Cu2+, and Zn2+.
Journal of Sol-Gel Science and Technology, 90, (3), 465-477, (2019)
   

Imprinted

Ke CB et al., Fluorometric determination of amifostine and alkaline phosphatase on amphiprotic molecularly imprinted silica crosslinked with binary functional silanes and carbon dots.
Biosensors and Bioelectronics, 151, Article111965-(2020)
   

imprinted catalyst

Zhang DN et al., Biomimic recognition and catalysis by an imprinted catalysts: a rational design of molecular self-assembly toward predetermined high specificity.
Catalysis Letters, 115, (3), 169-175, (2007)
   

imprinted catalyst

Li SJ et al., ’On/off’-switchable catalysis by a smart enzyme-like imprinted polymer.
Journal of Catalysis, 278, (2), 173-180, (2011)
   

imprinted catalyst

de Escobar CC et al., Molecularly imprinted TiO2 photocatalysts for degradation of diclofenac in water.
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 538, 729-738, (2018)
   

Imprinted catalysts

Jakubiak-Marcinkowska A et al., Molecularly imprinted polymeric Cu(II) catalysts with modified active centres mimicking oxidation enzymes.
Journal of Polymer Research, 20, (12), ArticleNo317-(2013)
   

Imprinted Cavity

Djunaidi M et al., Role of Number of Imprinted Cavity on the Selectivity of the Imprinted Polymer.
Advanced Science Letters 23 6506-6512 (2017)
   

imprinted chiral stationary phases

Sellergren B, Imprinted chiral stationary phases in high-performance liquid chromatography.
Journal of Chromatography A, 906, (1-2), 227-252, (2001)
   

Imprinted chitooligosaccharide

Zhang XF et al., Protective effects of ion-imprinted chitooligosaccharides as uranium-specific chelating agents against the cytotoxicity of depleted uranium in human kidney cells.
Toxicology, 286, (1-3), 75-84, (2011)
   

imprinted chitosan

Zhang XF et al., Detoxication effect of water-soluble imprinted cross-linked chitosan on depleted uranium induced toxicity to renal cells.
Acta Pharmaceutica Sinica, 46, (5), 513-520, (2011)
   

Imprinted chitosan crosslinked membrane

Zhang YH et al., Characterization and thermodynamic properties of Cu(II) imprinted chitosan crosslinked membrane.
Environmental Science, 33, (7), 2403-2409, (2012)
   

imprinted composite membrane

Qiu ZY et al., Preparation and Separation Properties of Molecularly Imprinted Composite Membranes with Nicotinic Acid as Template.
Acta Chimica Sinica, 68, (3), 246-250, (2010)
   

Imprinted composite membrane.

Zhao SY et al., Selective identification and separation of ReO4- by biomimetic flexible temperature-sensitive imprinted composite membranes.
Talanta, 235, Article122791-(2021)
   

Imprinted Composites

Proceeding, Bing NC et al, Controllable Imprinted Polymer Layer Coated Silica-Gel for S-1-(1-Naphthyl) Ethylamine Recognition by ATRP, 
In: Advanced Materials Research, Jin ZX, Xie Z, Gai GS (Eds.), 
237-240, (2012)
   

Imprinted contact lenses

Tieppo A et al., Sustained in vivo release from imprinted therapeutic contact lenses.
Journal of Controlled Release, 157, (3), 391-397, (2012)
   

imprinted copolymers

Kuzmic AE et al., A new approach to the preparation of molecularly imprinted polymers [Novi pristup priredivanju molekulski tiskanih polimera].
Polimeri (Zagreb), 26, (2), 63-68, (2005)
   

Imprinted crystalline colloidal assay

Sai N et al., A novel enrichment imprinted crystalline colloidal array for the ultratrace detection of chloramphenicol.
Talanta, 161, 1-7, (2016)
   

Imprinted electrochemical sensor

Hu YF et al., Imprinted sol-gel electrochemical sensor for the determination of benzylpenicillin based on Fe3O4@SiO2/multi-walled carbon nanotubes-chitosans nanocomposite film modified carbon electrode.
Analytica Chimica Acta, 698, (1-2), 61-68, (2011)
   

Imprinted electrochemical sensor

Hu YF et al., Electrochemical imprinted sensor for determination of oleanic acid based on poly (sodium 4-styrenesulfonate-co-acrylic acid)-grafted multi-walled carbon nanotubes-chitosan and cobalt hexacyanoferrate nanoparticles.
Biosensors and Bioelectronics, 31, (1), 190-196, (2012)
   

Imprinted electrochemical sensor

Deng PH et al., Electrochemical determination of bisphenol A in plastic bottled drinking water and canned beverages using a molecularly imprinted chitosan-graphene composite film modified electrode.
Food Chemistry, 157, 490-497, (2014)
   

Imprinted electrochemical sensor

Long F et al., Cobalt-nickel bimetallic nanoparticles decorated graphene sensitized imprinted electrochemical sensor for determination of octylphenol.
Electrochimica Acta, 168, 337-345, (2015)
   

Imprinted electrochemical sensor

Zhang ZH et al., Development and application of tetrabromobisphenol A imprinted electrochemical sensor based on graphene/carbon nanotubes three-dimensional nanocomposites modified carbon electrode.
Talanta, 134, 435-442, (2015)
   

Imprinted electrochemical sensor

Zhou BW et al., Imprinted Electrochemical Sensor Based on Cobalt Nanoparticles/Graphene Modified Carbon Electrode for Sensitive Determination of p-(Tert-octyl)phenol.
Chinese Journal of Analytical Chemistry, 43, (11), 1716-1721, (2015)
   

Imprinted electrochemical sensor

Li JB et al., Based on magnetic graphene oxide highly sensitive and selective imprinted sensor for determination of sunset yellow.
Talanta, 147, 169-176, (2016)
   

Imprinted electrode

Wen YP et al., Imprinted voltammetric streptomycin sensor based on a glassy carbon electrode modified with electropolymerized poly(pyrrole-3-carboxy acid) and electrochemically reduced graphene oxide.
Microchimica Acta, 184, (3), 935-941, (2017)
   

Imprinted electrodes

Buica GO et al., Poly(pyrrole-EDTA like) modified electrodes for mercury ions electroanalysis.
Journal of Optoelectronics and Advanced Materials, 11, (8), 1152-1159, (2009)
   

imprinted factor

Sun Y et al., Study on Molecular Recognition Mechanism of Chiral (S)-Ibuprofen’s Hydrogen Bonds Self-assembly Imprinted Polymer.
Chemical Journal of Chinese Universities, 33, (4), 838-842, (2012)
   

imprinted factor

Huangfu FY et al., Preparation of Molecularly Imprinted Polymer Based on Combinatorial Imprinted for Recognition of Norfloxacin.
Polymer-Plastics Technology and Engineering, 52, (10), 957-963, (2013)
   

Imprinted films

Zheng XD et al., Selective adsorption and separation of gadolinium with three-dimensionally interconnected macroporous imprinted chitosan films.
Cellulose, 24, (2), 977-988, (2017)
   

imprinted functionalized silica

Book chapter, Collinson MM, Imprinted Functionalized Silica, 
In: The Supramolecular Chemistry of Organic-Inorganic Hybrid Materials, Rurack K, Martínez-Máñez R (Eds.) 
John Wiley & Sons Inc.: Hoboken, 581-598, (2002)    

Imprinted functional polymer

Zhao LL et al., A novel amperometric nitric oxide sensor based on imprinted microenvironments for controlling metal coordination.
Sensors and Actuators B: Chemical, 171-172, 563-571, (2012)
   

imprinted hybrid film

Proceeding, Tao YG et al, Pb (II)-Imprinted Chitosan/TiO2 Hybrid Film for High Selectivity of Adsorption Lead Ion in Aqueous Solution, 
In: Advanced Materials Research, Jiang ZY, Han JT, Liu XH (Eds.), 
484-488, (2010)
   

imprinted hydrogel

Lago MA et al., Ionic and Polyampholyte N-Isopropylacrylamide-Based Hydrogels Prepared in the Presence of Imprinting Ligands: Stimuli-Responsiveness and Adsorption/Release Properties.
Journal of Functional Biomaterials, 2, (4), 373-390, (2011)
   

imprinted hydrogel

Kan WT et al., Mathematical modeling and sustained release property of a 5-fluorouracil imprinted vehicle.
European Polymer Journal, 49, (12), 4167-4175, (2013)
   

imprinted hydrogel

Eroglu B et al., A computational and experimental approach to develop minocycline-imprinted hydrogels and determination of their drug delivery performances.
Journal of Polymer Research, 25, (12), ArticleNo258-(2018)
   

imprinted hydrogel

Book chapter, Sobiech Met al., Imprinted Polymeric Gels for Pharmaceutical and Biomedical Purposes, 
In: Polymer Gels: Perspectives and Applications, Thakur VK, Thakur MK, Voicu SI (Eds.) 
Springer Singapore: Singapore, 153-183, (2018)    

imprinted hydrogel

Inan T et al., Elucidating doxycycline loading and release performance of imprinted hydrogels with different cross-linker concentrations: a computational and experimental study.
Journal of Polymer Research, 28, (11), Article408-(2021)
   

imprinted hydrogel

Lakouraj MM et al., Synthesis, characterization and in-vitro prolonged release of L-DOPA using a novel amphiphilic hydrogel based on sodium alginate-polypyrrole.
International Journal of Biological Macromolecules, 193, 609-618, (2021)
   

Imprinted hydrogels

Stannek M et al., Molecular Recognition Within Imprinted PVA/PAA Hydrogels.
Chemie Ingenieur Technik, 80, (9), 1440-1440, (2008)
   

Imprinted hydrogels

El-Arnaouty MB, Radiation Synthesis and Characterization Study of Imprinted Hydrogels for Metal Ion Adsorption.
Polymer-Plastics Technology and Engineering, 49, (10), 963-971, (2010)
   

Imprinted index

Pang SS et al., Synthesis of Bisphenol A π-π Stacking Self-assembly Imprinted Polymer by Precipitation Polymerization and Study on Specificity Recognition Mechanism.
Acta Polymerica Sinica, (1), 49-55, (2014)
   

Imprinted ionic

Buhani et al., Adsorption kinetics and isotherm of Cd(II) ion on Nannochloropsis sp biomass imprinted ionic polymer.
Desalination, 259, (1-3), 140-146, (2010)
   

imprinted magnetic composite adsorbent

Lü XH et al., Adsorption Behavior of Pb(II) Ion Imprinted Magnetic Composite Adsorbent in Aqueous Solution by FAAS.
Spectroscopy and Spectral Analysis, 36, (5), 1483-1487, (2016)
   

Imprinted magnetic nanoparticles

Song XL et al., Effective and selective adsorption of As(III) via imprinted magnetic Fe3O4/HTCC composite nanoparticles.
Journal of Environmental Chemical Engineering, 5, (1), 16-25, (2017)
   

Imprinted-magnetic ordered mesoporous carbon

Patra S et al., RETRACTED Removal and Recycling of Precious Rare Earth Element from Wastewater Samples Using Imprinted Magnetic Ordered Mesoporous Carbon.
ACS Sustainable Chemistry & Engineering, 5, (8), 6910-6923, (2017)
   

Imprinted magnetic reduced graphene oxide

Patra S et al., Imprinted magnetic graphene oxide for the mini-solid phase extraction of Eu (III) from coal mine area.
AIP Conference Proceedings, 1832, (1), ArticleNo050009-(2017)
   

imprinted materials

Book chapter, Lieberzeit PAet al., Nanostructured functional polymers for engine oil quality sensors, 
In: Proceedings Of The IEEE Sensors 2004, Rocha D, Sarro PM, Vellekoop MJ (Eds.) 
IEEE: New York, 449-450, (2004)    

imprinted materials

de Escobar CC et al., The sol-gel route effect on the preparation of molecularly imprinted silica-based materials for selective and competitive photocatalysis.
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 486, 96-105, (2015)
   

Imprinted mechanism

Cai ZF et al., The imprinted mechanism of metallothionein-imprinted polymers.
Iranian Polymer Journal (English Edition), 17, (4), 289-296, (2008)
   

Imprinted Membrane

Kielczynski R et al., Molecularly imprinted membranes for cinchona alkaloids separation.
Separation and Purification Technology, 41, (3), 231-235, (2005)
   

Imprinted Membrane

Kang JW et al., Studies on preparation and characteristics of a novel copper(II)-Schiff base imprinted membrane.
Journal of Northwest Normal University (Natural Science), 44, (5), 48-52, (2008)
   

Imprinted Membrane

Zhang QQ et al., Imprinting Effect Inducing Crystallization of Uracil on Polymer Membrane Prepared in Supercritical CO2 Phase Inversion.
Journal of Chemical Engineering of Japan, 42, (1), 21-28, (2009)
   

Imprinted Membrane

Proceeding, Bing NC et al, Controlled grafting of S-naproxen imprinted layer on PVDF microporous membrane by ATRP, 
In: Advanced Materials Research, Liu XH, Jiang ZY, Han JT (Eds.), 
1026-1030, (2010)
   

Imprinted Membrane

Ul-Haq N et al., Chiral resolution of phenylalanine by d-Phe imprinted membrane considering rejection property.
Bioprocess and Biosystems Engineering, 33, (1), 79-86, (2010)
   

Imprinted Membrane

Wang JJ et al., Preparation of Novel Molecular Imprinted Film/Au nanoparticlar Modified Electrode for Bromophos ethyl and Its Application.
Chemical Journal of Chinese Universities, 32, (11), 2528-2532, (2011)
   

Imprinted Membrane

Proceeding, Chen S et al, Imprinted CS Membrane Using EGCG as Template, 
In: Advanced Materials Research, Ren NQ, Che LK, Jin B, Dong RJ, Su HQ (Eds.), 
1630-1633, (2012)
   

Imprinted Membrane

He ZH et al., Fabrication of new cellulose acetate blend imprinted membrane assisted with ionic liquid ([BMIM]Cl) for selective adsorption of salicylic acid from industrial wastewater.
Separation and Purification Technology, 145, 63-74, (2015)
   

Imprinted Membrane

Roy E et al., A single solution for arsenite and arsenate removal from drinking water using cysteine@ZnS:TiO2 nanoparticle modified molecularly imprinted biofouling-resistant filtration membrane.
Chemical Engineering Journal, 304, 259-270, (2016)
   

Imprinted Membrane

Li XL et al., Fabrication of Polyether Sulfone Blend Imprinted Membranes for Selective Adsorption of p-hydroxybenzonic from Salicylic Acid.
Fibers and Polymers, 19, (5), 977-986, (2018)
   

Imprinted membranes

Pegoraro C et al., Molecularly imprinted poly(ethylene-co-vinyl alcohol) membranes for the specific recognition of phospholipids.
Biosensors and Bioelectronics, 24, (4), 748-755, (2008)
   

Imprinted membranes

Zhong SA et al., Preparation and Permeation Characteristics of Copper Ion Imprinted Polymer Membranes.
Chinese Journal of Applied Chemistry, 25, (8), 989-991, (2008)
   

Imprinted membranes

Donato L et al., Surface Functionalization of PVDF Membrane with a Naringin-Imprinted Polymer Layer Using Photo-Polymerization Method.
Separation Science and Technology, 46, (10), 1555-1562, (2011)
   

Imprinted membranes

Yu XP et al., Fouling Resistant CA/PVA/TiO2 Imprinted Membranes for Selective Recognition and Separation Salicylic Acid from Waste Water.
Frontiers in Chemistry, 5, ArticleNo2-(2017)
   

imprinted mesoporous films

Zheng XD et al., Efficient Recovery of Neodymium in Acidic System by Free-Standing Dual-Template Docking Oriented Ionic Imprinted Mesoporous Films.
ACS Applied Materials & Interfaces, 9, (1), 730-739, (2017)
   

Imprinted mesoporous silica

Gañán J et al., Evaluation of mesoporous imprinted silicas as MSPD selective sorbents of ketoprofen in powder milk.
Materials Letters, 197, 5-7, (2017)
   

Imprinted mesoporous silica

He R et al., Design and fabrication of highly ordered ion imprinted SBA-15 and MCM-41 mesoporous organosilicas for efficient removal of Ni2+ from different properties of wastewaters.
Microporous And Mesoporous Materials, 257, 212-221, (2018)
   

Imprinted microplate

El-Aal MAA et al., Preparation and characterization of 96-well microplates coated with molecularly imprinted polymer for determination and biosimilarity assessment of recombinant human erythropoietin.
Journal of Chromatography A, 1641, Article462012-(2021)
   

Imprinted microsphere

Feng QZ et al., Synthesis and binding site characteristics of 2,4,6-trichlorophenol-imprinted polymers.
Analytical and Bioanalytical Chemistry, 392, (7-8), 1419-1429, (2008)
   

Imprinted microspheres

Wei ST et al., Binding site characteristics of 17β-estradiol imprinted polymers.
Biosensors and Bioelectronics, 23, (2), 201-209, (2007)
   

Imprinted microspheres

Qiao FX et al., Molecularly imprinted microspheres as SPE sorbent for selective extraction of four Sudan dyes in catsup products.
Journal of Chromatography B, 879, (27), 2891-2896, (2011)
   

Imprinted microspheres

Qiao JD et al., Simultaneous Determination of Four Sudan Dyes in Egg Yolks by Molecularly Imprinted SPE Coupled with LC-UV Detection.
Chromatographia, 73, (3), 227-233, (2011)
   

Imprinted microspheres

Tang HZ et al., Preparation and Condition Optimization of Imprinted Microspheres of Ofloxacin.
Guangdong Chemical Industry, 40, (2), 5-6, (2013)
   

Imprinted microspheres

Yuan XY et al., High-Performance Multiporous Imprinted Microspheres Based on N-Doped Carbon Dots Exfoliated from Covalent Organic Framework for Flonicamid Optosensing.
ACS Applied Materials & Interfaces, 12, (22), 25150-25158, (2020)
   

Imprinted molecular layer

Dehghani M et al., Determination of cefixime using a novel electrochemical sensor produced with gold nanowires/graphene oxide/electropolymerized molecular imprinted polymer.
Materials Science and Engineering: C, 96, 654-660, (2019)
   

imprinted molecular membrane

Li L et al., Preparation of penicillin imprinted membrane electrochemical sensor.
Chinese Journal of Bioprocess Engineering, 8, (5), 53-58, (2010)
   

imprinted molecule

Chen CB et al., Progress in molecular imprinting technique.
Chemical Research and Application, 18, (8), 896-902, (2006)
   

imprinted nanocomposite

Li K et al., Selective Adsorption of Gd3+ on a Magnetically Retrievable Imprinted Chitosan/Carbon Nanotube Composite with High Capacity.
ACS Applied Materials & Interfaces, 7, (38), 21047-21055, (2015)
   

imprinted nanoparticle

Lehmann M et al., Selective separations and hydrodynamic studies: a new approach using molecularly imprinted nanosphere composite membranes.
Desalination, 149, (1-3), 315-321, (2002)
   

imprinted nanoparticle

Saylan Y et al., Detecting Fingerprints of Waterborne Bacteria on a Sensor.
Chemosensors, 7, (3), ArticleNo33-(2019)
   

Imprinted nanoparticles

Ciardelli G et al., Supported imprinted nanospheres for the selective recognition of cholesterol.
Biosensors and Bioelectronics, 21, (12), 2329-2338, (2006)
   

Imprinted nanoparticles

Karimi MA et al., Preparation of magnetic molecularly imprinted nanoparticles for selective separation and determination of prednisolone drug.
Inorganic and Nano-Metal Chemistry, 47, (2), 308-312, (2017)
   

Imprinted nanoreceptor

Díaz-Díaz G et al., New materials for analytical biomimetic assays based on affinity and catalytic receptors prepared by molecular imprinting.
TrAC Trends in Analytical Chemistry, 33, (1), 68-80, (2012)
   

imprinted networks

Hasson CD et al., Imprinting chiral structure on liquid crystalline elastomers.
Molecular Crystals And Liquid Crystals Science And Technology Section A-Molecular Crystals And Liquid Crystals, 332, 155-162, (1999)
   

imprinted polyaniline

Regasa MB et al., Molecularly imprinted polyaniline molecular receptor-based chemical sensor for the electrochemical determination of melamine.
Journal of Molecular Recognition, 33, (7), Article_e2836-(2020)
   

Imprinted polydopamine

Zavareh S et al., Synthesis of polydopamine as a new and biocompatible coating of magnetic nanoparticles for delivery of doxorubicin in mouse breast adenocarcinoma.
Cancer Chemotherapy and Pharmacology, 78, (5), 1073-1084, (2016)
   

Imprinted polydopamine

Proceeding, Xi XG et al, Surface imprinted polydopamine based magnetic separation and quantum dots based fluorescent biosensor for detection of foodborne pathogenic bacteria, 

ArticleNo1801203, (2018)
   

imprinted polyethersulfone particles

Yu BY et al., Effect of the template molecules and nonsolvent additives on the recognition property of molecular imprinted polyethersulfone particles.
Journal of Applied Polymer Science, 108, (6), 3859-3866, (2008)
   

Imprinted poly(MAA-co-EGDMA)

Syu MJ et al., Binding specificity of α-bilirubin-imprinted poly(methacrylic acid-co-ethylene glycol dimethylacrylate) toward α-bilirubin.
Biomaterials, 26, (22), 4684-4692, (2005)
   

imprinted polymer

Ohkubo K et al., Preparation and catalytic property of L-histidyl group-introduced, cross-linked poly(ethylene imine)s imprinted by a transition-state analog of an esterolysis reaction.
Polymer, 35, (24), 5372-5374, (1994)
   

imprinted polymer

Ohkubo K et al., Catalytic activity of a novel water-soluble cross-linked polymer imprinted by a transition-state analogue for the stereoselective hydrolysis of enantiomeric amino acid esters.
Polymer, 37, (17), 3993-3995, (1996)
   

imprinted polymer

Rachkov AE et al., Molecularly imprinted polymers as artificial steroid receptors.
Polymers for Advanced Technologies, 9, (8), 511-519, (1998)
   

imprinted polymer

Whitcombe MJ et al., Predicting the selectivity of imprinted polymers.
Chromatographia, 47, (7-8), 457-464, (1998)
   

imprinted polymer

Zhou J et al., Study of the nature of recognition in molecularly imprinted polymer selective for 2-aminopyridine.
Analytica Chimica Acta, 381, (1), 85-91, (1999)
   

imprinted polymer

Guo HS et al., Study on the binding characteristics of molecular imprinted polymer selective for cefalexin in aqueous media.
Chinese Journal of Analytical Chemistry, 28, (10), 1214-1219, (2000)
   

imprinted polymer

Kirsch N et al., Enhancement of selectivity of imprinted polymers via post-imprinting modification of recognition sites.
Polymer, 41, (15), 5583-5590, (2000)
   

imprinted polymer

Lu YB et al., Synthesis and Properties Study of Quinine Molecularly Imprinted Polymer.
Journal of Analytical Science, 16, (4), 310-313, (2000)
   

imprinted polymer

Suedee R et al., Evaluation of matrices containing molecularly imprinted polymers in the enantioselective-controlled delivery of b-blockers.
Journal of Controlled Release, 66, (2-3), 135-147, (2000)
   

imprinted polymer

Whitcombe MJ et al., Imprinted polymers: Versatile new tools in synthesis.
Synlett, (6), 911-923, (2000)
   

imprinted polymer

Rachkov A et al., Towards molecularly imprinted polymers selective to peptides and proteins. The epitope approach.
Biochimica et Biophysica Acta - Protein Structure and Molecular Enzymology, 1544, (1-2), 255-266, (2001)
   

imprinted polymer

Kirchner R et al., Calorimetric investigation of chiral recognition processes in a molecularly imprinted polymer.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 43, (3-4), 279-283, (2002)
   

imprinted polymer

Tsunemori H et al., Surface imprinting polymers for the recognition of nucleotides.
Bioseparation, 10, (6), 315-321, (2002)
   

imprinted polymer

Alexander C et al., Imprinted polymers: artificial molecular recognition materials with applications in synthesis and catalysis.
Tetrahedron, 59, (12), 2025-2057, (2003)
   

imprinted polymer

Liu CP et al., Study on the adsorption property of copper (II) imprinted chelating resin for metal ions.
Ion Exchange and Adsorption, 19, (6), 504-510, (2003)
   

imprinted polymer

Say R et al., Preconcentration of copper on ion-selective imprinted polymer microbeads.
Analytica Chimica Acta, 480, (2), 251-258, (2003)
   

imprinted polymer

Wandelt B et al., Steady-state and time-resolved fluorescence studies of fluorescent imprinted polymers.
Journal of Luminescence, 102-103, (1), 774-781, (2003)
   

imprinted polymer

Busi E et al., An innovative approach to the design of plastic antibodies: molecular imprinting via a non-polar transition state analogue.
Journal of Molecular Catalysis A: Chemical, 217, (1-2), 31-36, (2004)
   

imprinted polymer

Guo TY et al., Molecular imprinting polymers for chiral separation of amino acid derivatives.
Progress In Chemistry, 16, (4), 638-642, (2004)
   

imprinted polymer

Li H et al., Adsorption isotherms and sites distribution of caffeic acid - imprinted polymer monolith from frontal analysis.
Chromatographia, 60, (7-8), 425-431, (2004)
   

imprinted polymer

Wang H et al., Preparation and characterization of theophylline crystal-imprinted polymers.
Acta Polymerica Sinica, 1, (2), 288-291, (2004)
   

imprinted polymer

Rick J et al., Enthalpy changes associated with protein binding to thin films.
Biosensors and Bioelectronics, 20, (9), 1878-1883, (2005)
   

imprinted polymer

Tóth B et al., Chromatographic behavior of silica-polymer composite molecularly imprinted materials.
Journal of Chromatography A, 1100, (1), 60-67, (2005)
   

Imprinted-polymer

Liu HY et al., Solid-phase extraction of trace diniconazole on imprinted polymers stationary phase.
Chemical Journal on Internet, 8, (9), Art. No.: 089056ne-(2006)
   

imprinted polymer

Pérez-Moral N et al., Direct rapid synthesis of MIP beads in SPE cartridges.
Biosensors and Bioelectronics, 21, (9), 1798-1803, (2006)
   

imprinted polymer

Sumaoka J et al., Recognition of bioactive oligopeptide by imprinted cyclodextrin polymer in water.
Polymer Preprints, Japan, 55, (1), 1668-(2006)
   

imprinted polymer

Zhu JH et al., Preparation and characterization of Cu(II)-molecularly imprinted polymer.
Chemical Journal of Chinese Universities, 27, (10), 1853-1855, (2006)
   

imprinted polymer

Breton F et al., Virtual imprinting as a tool to design efficient MIPs for photosynthesis-inhibiting herbicides.
Biosensors and Bioelectronics, 22, (9-10), 1948-1954, (2007)
   

imprinted polymer

Heitzmann M et al., Complexation of poly(pyrrole-EDTA like) film modified electrodes: Application to metal cations electroanalysis.
Electrochimica Acta, 52, (9), 3082-3087, (2007)
   

imprinted polymer

Liu Z et al., Preparation and Adsorbability of Copper Ion Imprinted Polymer.
Journal of GuiLin University of Technology, 27, (1), 106-110, (2007)
   

imprinted polymer

Namvar A et al., Microbial imprinted polypyrrole/poly(3-methylthiophene) composite films for the detection of Bacillus endospores.
Biosensors and Bioelectronics, 22, (9-10), 2018-2024, (2007)
   

imprinted polymer

Sadeghi S et al., Potentiometric sensing of levamisole hydrochloride based on molecularly imprinted polymer.
Sensors and Actuators B: Chemical, 122, (1), 158-164, (2007)
   

imprinted polymer

Skogsberg U et al., A solid-state and suspended-state magic angle spinning nuclear magnetic resonance spectroscopic investigation of a 9-ethyladenine molecularly imprinted polymer.
Polymer, 48, (1), 229-238, (2007)
   

imprinted polymer

Zhang MN et al., Synthesis and Adsorbability of Molecular Imprinted Polymer of Tributyltin.
Natural Science Journal of Hainan University, 25, (1), 46-50, (2007)
   

imprinted polymer

Zhu LL et al., Study on preparation and adsorbability of Cu²⁺ imprinted polymers from emulsion polymerization.
Journal of Fuzhou University (Natural Science Edition), 35, (5), 754-759, (2007)
   

imprinted polymer

BelBruno JJ et al., Amazing pores: Processing, morphology and functional states of molecularly imprinted polymers as sensor materials.
Molecular Crystals And Liquid Crystals, 483, 179-190, (2008)
   

imprinted polymer

Cai ZF et al., The imprinted mechanism of metallothionein-imprinted polymers.
Iranian Polymer Journal (English Edition), 17, (4), 289-296, (2008)
   

imprinted polymer

Dam AH et al., Metal ion-imprinted polymer microspheres derived from copper methacrylate for selective separation of heavy metal ions.
Journal of Applied Polymer Science, 108, (1), 14-24, (2008)
   

imprinted polymer

Garde-Cerdán T et al., Molecularly Imprinted Polymer-Assisted Simple Clean-Up of 2,4,6-Trichloroanisole and Ethylphenols from Aged Red Wines.
American Journal of Enology and Viticulture, 59, (4), 396-400, (2008)
   

imprinted polymer

Bhaskarapillai A et al., Theoretical investigations of the experimentally observed selectivity of a cobalt imprinted polymer.
Biosensors and Bioelectronics, 25, (3), 558-562, (2009)
   

imprinted polymer

Buica GO et al., Voltammetric Sensing of Mercury and Copper Cations at Poly(EDTA-like) Film Modified Electrode.
Electroanalysis, 21, (1), 77-86, (2009)
   

imprinted polymer

Dima SO et al., Molecularly Imprinted Membranes for Selective Separations.
Materiale Plastice, 46, (4), 372-378, (2009)
   

imprinted polymer

Dima SO et al., Proofs for molecular imprinting of an acrylic copolymer by phase inversion.
UPB Scientific Bulletin, Series B: Chemistry and Materials Science, 71, (4), 21-30, (2009)
   

imprinted polymer

Fan PM et al., Molecular Recognition Characteristics of Quercetin’s Metal-complexing Imprinted Polymer.
Chemical Journal of Chinese Universities, 30, (12), 2514-2520, (2009)
   

imprinted polymer

Medina-Castillo AL et al., A semi-empirical model to simplify the synthesis of homogeneous and transparent cross-linked polymers and their application in the preparation of optical sensing films.
Biosensors and Bioelectronics, 25, (2), 442-449, (2009)
   

imprinted polymer

Meng AC et al., Multi-analyte imprinting capability of OMNiMIPs versus traditional molecularly imprinted polymers.
Journal of Molecular Recognition, 22, (2), 121-128, (2009)
   

imprinted polymer

Xue QH, Preparation of Pd(II)-Imprinted Polymer and Study on Its Property of Separation and Enrichment of Palladium(II).
Physical Testing and Chemical Analysis Part B: Chemical Analysis, 45, (7), 783-786, (2009)
   

imprinted polymer

Dinçer A et al., Preparation of glutathione imprinted polymer.
Preparative Biochemistry and Biotechnology, 40, (3), 188-197, (2010)
   

imprinted polymer

Gawin M et al., Preparation of a new Cd(II)-imprinted polymer and its application to determination of cadmium(II) via flow-injection-flame atomic absorption spectrometry.
Talanta, 80, (3), 1305-1310, (2010)
   

imprinted polymer

Gómez-Pineda LE et al., Quantum Chemical Calculations on the Interaction between Flavonol and Functional Monomers (Methacrylic Acid and 4-Vinylpyridine) in Molecularly Imprinted Polymers.
Molecules, 15, (6), 4017-4032, (2010)
   

imprinted polymer

Hoai NT et al., Batch and column separation characteristics of copper-imprinted porous polymer micro-beads synthesized by a direct imprinting method.
Journal of Hazardous Materials, 173, (1-3), 462-467, (2010)
   

imprinted polymer

Nateghi MR et al., Imprinted Poly(o-phenylenediamine-co-aniline) Electrode for Warfarin Assay in Human Samples by Differential Pulse Voltammetry.
Asian Journal of Chemistry, 22, (5), 3516-3524, (2010)
   

imprinted polymer

Riahi S et al., Computational Approach to Investigation of Template/Monomer Complex in Imprinted Polymers; Dinitrobenzene Sensor.
International Journal of Electrochemical Science, 5, (4), 509-516, (2010)
   

imprinted polymer

Xiao JS et al., Synthesis and Spectral Chartacteristic of Molecularly Imprinted Polymers for Melamine.
Journal of University of South China (Science and Technology), 24, (2), 94-98, (2010)
   

imprinted polymer

Alizadeh T et al., A carbon paste electrode impregnated with Cd2+ imprinted polymer as a new and high selective electrochemical sensor for determination of ultra-trace Cd2+ in water samples.
Journal of Electroanalytical Chemistry, 657, (1-2), 98-106, (2011)
   

imprinted polymer

Alizadeh T et al., Preparation of nano-sized Pb2+ imprinted polymer and its application as the chemical interface of an electrochemical sensor for toxic lead determination in different real samples.
Journal of Hazardous Materials, 190, (1-3), 451-459, (2011)
   

imprinted polymer

Dourado EMA et al., Molecular Recognition Effects in Atomistic Models of Imprinted Polymers.
International Journal of Molecular Sciences, 12, (8), 4781-4804, (2011)
   

imprinted polymer

Khajeh M et al., Synthesis, characterization and removal of lead from water samples using lead-ion imprinted polymer.
Chemical Engineering Journal, 166, (3), 1158-1163, (2011)
   

imprinted polymer

Khajeh M et al., Synthesis of ion-selective imprinted polymer for manganese removal from environmental water.
Polymer Bulletin, 67, (3), 413-425, (2011)
   

imprinted polymer

Khajeh M et al., A pre-concentration procedure employing a new imprinted polymer for the determination of copper in water.
International Journal of Environmental Analytical Chemistry, 91, (13), 1310-1319, (2011)
   

imprinted polymer

Li L et al., Preparation and adsorption characteristics of the lead (II) ion imprinted polymer.
Chemistry Bulletin, 74, (6), 539-544, (2011)
   

imprinted polymer

Nicolescu TV et al., Influence of crosslinker/porogen ratio upon imprinted polymer parameters.
U. P. B. Science Bulletin, Series B, 73, (1), 163-172, (2011)
   

imprinted polymer

Özkahraman B et al., Synthesis of Zn(II) Ion-Imprinted Polymeric Adsorbent for Selective Removal of Zinc from Aqueous Solutions.
Polymer-Plastics Technology and Engineering, 50, (2), 216-219, (2011)
   

imprinted polymer

Stringer RC et al., Comparison of molecular imprinted particles prepared using precipitation polymerization in water and chloroform for fluorescent detection of nitroaromatics.
Analytica Chimica Acta, 703, (2), 239-244, (2011)
   

imprinted polymer

Sun SD et al., Polymeric Particles for the Removal of Endocrine Disruptors.
Separation & Purification Reviews, 40, (4), 312-337, (2011)
   

imprinted polymer

Wen QA et al., Microwave-assisted Heating for Rapid Preparation and On-line Enrichment Application of Core-shell Uridine Imprinted Polymer.
Acta Chimica Sinica, 69, (2), 209-214, (2011)
   

imprinted polymer

Alizadeh T, Application of electrochemical impedance spectroscopy and conventional rebinding experiments for the investigation of recognition characteristic of bulky and nano-sized imprinted polymers.
Materials Chemistry and Physics, 135, (2-3), 1012-1023, (2012)
   

imprinted polymer

Kamal H et al., Radiation Syntheses of Molecularly Imprinted Polymer for Metal Ion Selective Separation.
Arab Journal of Nuclear Sciences and Applications, 45, (2), 79-96, (2012)
   

imprinted polymer

Nishad PA et al., Cobalt (II) imprinted chitosan for selective removal of cobalt during nuclear reactor decontamination.
Carbohydrate Polymers, 87, (4), 2690-2696, (2012)
   

imprinted polymer

Sadeghi S et al., Magnetic nanoparticles with an imprinted polymer coating for the selective extraction of uranyl ions.
Microchimica Acta, 178, (1), 89-97, (2012)
   

imprinted polymer

Book chapter, Sellergren Bet al., Molecularly Imprinted Polymers, 
In: Supramolecular Chemistry, Gale P, Steed J (Eds.) 
John Wiley & Sons, Ltd: 3255-3282, (2012)    

imprinted polymer

Tom LA et al., Development of a novel molecularly imprinted polymer for the retention of 4,6-dimethyldibenzothiophene.
Microchimica Acta, 176, (3), 375-380, (2012)
   

imprinted polymer

Alizadeh T et al., Highly-selective determination of carcinogenic derivative of propranolol by using a carbon paste electrode incorporated with nano-sized propranolol-imprinted polymer.
Electrochimica Acta, 111, 663-673, (2013)
   

imprinted polymer

Alizadeh T et al., Toluene chemiresistor sensor based on nano-porous toluene-imprinted polymer.
International Journal of Environmental Analytical Chemistry, 93, (8), 919-934, (2013)
   

imprinted polymer

de Lima GC et al., Determination of selenium using atomically imprinted polymer (AIP) and hydride generation atomic absorption spectrometry.
Analytica Chimica Acta, 768, 35-40, (2013)
   

imprinted polymer

Huangfu FY et al., Preparation and Properties of the Norfloxacin-Zinc (II) Molecularly Imprinted Membrane Chromatography.
Polymer Materials Science and Engineering, 29, (6), 129-132, (2013)
   

imprinted polymer

Liu YN et al., Preparation and Solid-phase Extraction Applied of Di(2-ethylhexyl)phthalate Surface Imprinted Polymers.
Chinese Journal of Applied Chemistry, 30, (3), 316-322, (2013)
   

imprinted polymer

Liu YN et al., Preparation and Application of Melamine Magnetic Molecularly Imprinted Solid Phase Extraction Material.
Chinese Journal of Applied Chemistry, 30, (10), 1222-1230, (2013)
   

imprinted polymer

Medine A et al., Analysis of selective adsorption of Cu(II) on Cu(II)-imprinted acrylonitrile-co-styrene microspheres by FAAS.
Chinese Journal of Analysis Laboratory, 32, (7), 84-87, (2013)
   

imprinted polymer

Meng MJ et al., Highly efficient adsorption of salicylic acid from aqueous solution by wollastonite-based imprinted adsorbent: A fixed-bed column study.
Chemical Engineering Journal, 225, 331-339, (2013)
   

imprinted polymer

Pakade V et al., Molecular imprinted polymer for solid-phase extraction of flavonol aglycones from Moringa oleifera extracts.
Journal of Separation Science, 36, (3), 548-555, (2013)
   

imprinted polymer

Zhang HJ et al., Synthesis of a new ionic imprinted polymer for the extraction of uranium from seawater.
Journal of Radioanalytical and Nuclear Chemistry, 298, (3), 1705-1712, (2013)
   

imprinted polymer

Aladin S et al., Incorporation of network in synthesis of zircon-imprinted polymer and its effect on zircon ion extraction.
AIP Conference Proceedings, 1589, 230-234, (2014)
   

imprinted polymer

Alizadeh T et al., Synthesis of nano-sized arsenic-imprinted polymer and its use as As3+ selective ionophore in a potentiometric membrane electrode: Part 1.
Analytica Chimica Acta, 843, 7-17, (2014)
   

imprinted polymer

Alizadeh T et al., Graphene/graphite/molecularly imprinted polymer nanocomposite as the highly selective gas sensor for nitrobenzene vapor recognition.
Journal of Environmental Chemical Engineering, 2, (3), 1514-1526, (2014)
   

imprinted polymer

Alizadeh T, Preparation of magnetic TNT-imprinted polymer nanoparticles and their accumulation onto magnetic carbon paste electrode for TNT determination.
Biosensors and Bioelectronics, 61, 532-540, (2014)
   

imprinted polymer

Azimi A et al., Computational prediction and experimental selectivity coefficients for hydroxyzine and cetirizine molecularly imprinted polymer based potentiometric sensors.
Analytica Chimica Acta, 812, 184-190, (2014)
   

imprinted polymer

Karimian N et al., Electrochemical evaluation of troponin T imprinted polymer receptor.
Biosensors and Bioelectronics, 59, 160-165, (2014)
   

imprinted polymer

Xie ZH et al., Preparation and adsorption properties of copper (II) ion imprinted polymer.
Journal of Functional Materials, 45, (22), 22060-22064+22069, (2014)
   

imprinted polymer

Alizadeh T et al., Improvement of durability and analytical characteristics of arsenic-imprinted polymer-based PVC membrane electrode via surface modification of nano-sized imprinted polymer particles: part 2.
Electrochimica Acta, 178, 877-885, (2015)
   

imprinted polymer

Alizadeh T et al., Competitive extraction of Gd(III) into a carbon paste electrode impregnated with a nano-sized Gd(III)-imprinted polymer as a new method for its indirect voltammetric determination.
Microchimica Acta, 182, (5-6), 1205-1212, (2015)
   

imprinted polymer

Casis N et al., Molecularly imprinted hydrogels from colloidal crystals for the detection of progesterone.
Polymer International, 64, (6), 773-779, (2015)
   

imprinted polymer

Chai ZY et al., Thermochemical study of amino acid imprinted polymer films.
Journal of Molecular Recognition, 28, (11), 651-655, (2015)
   

imprinted polymer

Gholivand MB et al., Molecularly Imprinted Polymer Preconcentration and Flow Injection Amperometric Determination of 4-Nitrophenol in Water.
Analytical Letters, 48, (18), 2856-2869, (2015)
   

imprinted polymer

Yeoh CB et al., Study Toward the Preparation of Aqueous Compatible Shikimic Acid Imprinted Polymer.
Journal of Oil Palm Research, 27, (1), 90-96, (2015)
   

imprinted polymer

Zhu GF et al., Preparation of surface molecularly imprinted polymer and selective extraction of 1-methoxyethyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide.
Monatshefte für Chemie - Chemical Monthly, 146, (3), 431-440, (2015)
   

imprinted polymer

Alizadeh T et al., Graphene/graphite paste electrode incorporated with molecularly imprinted polymer nanoparticles as a novel sensor for differential pulse voltammetry determination of fluoxetine.
Biosensors and Bioelectronics, 81, 198-206, (2016)
   

imprinted polymer

Ashouri N et al., Preparation of a new nanoparticle Cd(II)-imprinted polymer and its application for selective separation of cadmium(II) ions from aqueous solutions and determination via inductively coupled plasma optical emission spectrometry.
Desalination and Water Treatment, 57, (30), 14280-14289, (2016)
   

imprinted polymer

Fasihi J et al., Preparation of ion-imprinted polyvinyl sulfonate-grafted silica particles for trace enrichment of Th(IV) prior to determination by inductively coupled plasma-mass spectrometry.
International Journal of Environmental Analytical Chemistry, 96, (8), 789-800, (2016)
   

imprinted polymer

Proceeding, Gam-Derouich S et al, Imprinted polymers and photonic crystals for sensing of molecules and nanoparticles, 

1-4, (2016)
   

imprinted polymer

Hashemi-Moghaddam H et al., Evaluation of magnetic nanoparticles coated by 5-fluorouracil imprinted polymer for controlled drug delivery in mouse breast cancer model.
International Journal of Pharmaceutics, 497, (1-2), 228-238, (2016)
   

imprinted polymer

Hu SL et al., Preparation of Pb(II) Ion Imprinted Polymer and Its Application as the Interface of an Electrochemical Sensor for Trace Lead Determination.
Analytical Sciences, 32, (9), 975-980, (2016)
   

imprinted polymer

Wang HQ et al., Preparation and adsorption performance of novel ion imprinting magnetic microspheres.
Modern Chemical Industry, 36, (5), 57-60, (2016)
   

imprinted polymer

Alizadeh T et al., An extraordinarily sensitive voltammetric sensor with picomolar detection limit for Pb2+ determination based on carbon paste electrode impregnated with nano-sized imprinted polymer and multi-walled carbon nanotubes.
Journal of Environmental Chemical Engineering, 5, (5), 4327-4336, (2017)
   

imprinted polymer

Djunaidi M et al., Role of Number of Imprinted Cavity on the Selectivity of the Imprinted Polymer.
Advanced Science Letters 23 6506-6512 (2017)
   

imprinted polymer

Ghanei-Motlagh M et al., An Electrochemical Sensor Based on Novel Ion Imprinted Polymeric Nanoparticles for Selective Detection of Lead Ions.
Analytical and Bioanalytical Chemistry Research, 4, (2), 295-306, (2017)
   

imprinted polymer

Güney O et al., Synthesis and characterization of quinoline-derivated fluorescentsol-gel-imprinted polymer as a chemosensor for sensing of uranyl ion.
Journal of Sol-Gel Science and Technology, 81, (2), 534-543, (2017)
   

imprinted polymer

Hashemi-Moghaddam H et al., Evaluation of molecularly imprinted polymer based on HER2 epitope for targeted drug delivery in ovarian cancer mouse model.
Reactive and Functional Polymers, 121, 82-90, (2017)
   

imprinted polymer

Krstulja A et al., Tailor-Made Molecularly Imprinted Polymer for Selective Recognition of the Urinary Tumor Marker Pseudouridine.
Macromolecular Bioscience, 17, (12), ArticleNo1700250-(2017)
   

imprinted polymer

Liu Y et al., A novel dual temperature responsive mesoporous imprinted polymer for Cd(II) adsorption and temperature switchable controlled separation and regeneration.
Chemical Engineering Journal, 328, 11-24, (2017)
   

imprinted polymer

Manickam P et al., Theoretical Studies of Cortisol-Imprinted Prepolymerization Mixtures: Structural Insights into Improving the Selectivity of Affinity Sensors.
Journal of The Electrochemical Society, 164, (5), B3077-B3080, (2017)
   

imprinted polymer

Pakade VE et al., Quantitative determination of trace concentrations of quercetin from prickly pear skin complex sample extracts by application of molecularly imprinted polymers.
Journal of Environmental Chemical Engineering, 5, (1), 1186-1195, (2017)
   

imprinted polymer

Patra S et al., RETRACTED Graphene quantum dots decorated CdS doped graphene oxide sheets in dual action mode: As initiator and platform for designing of nimesulide imprinted polymer (Retracted).
Biosensors and Bioelectronics, 89, 627-635, (2017)
   

imprinted polymer

Roy E et al., RETRACTED Single cell imprinting on the surface of Ag-ZnO bimetallic nanoparticle modified graphene oxide sheets for targeted detection, removal and photothermal killing of E. Coli (Retracted).
Biosensors and Bioelectronics, 89, (Part 1), 620-626, (2017)
   

imprinted polymer

Akhoundian M et al., A new carbon paste electrode modified with MWCNTs and nano-structured molecularly imprinted polymer for ultratrace determination of trimipramine: The crucial effect of electrode components mixing on its performance.
Biosensors and Bioelectronics, 111, 27-33, (2018)
   

imprinted polymer

Alizadeh T et al., An innovative method for synthesis of imprinted polymer nanomaterial holding thiamine (vitamin B1) selective sites and its application for thiamine determination in food samples.
Journal of Chromatography B, 1084, 166-174, (2018)
   

imprinted polymer

Alizadeh T et al., Synthesis of nano-sized hydrogen phosphate-imprinted polymer in acetonitrile/water mixture and its use as a recognition element of hydrogen phosphate selective all-solid state potentiometric electrode.
Journal of Molecular Recognition, 31, (2), ArticleNoe2678-(2018)
   

imprinted polymer

Ao XL et al., Preparation of Pb(II) ion-imprinted polymers and their application in selective removal from wastewater.
Adsorption Science & Technology, 36, (1-2), 774-787, (2018)
   

imprinted polymer

Ermis N et al., Preparation of Molecularly Imprinted Polypyrrole Modified Gold Electrode for Determination of Tyrosine in Biological Samples.
International Journal of Electrochemical Science, 13, 2286-2298, (2018)
   

imprinted polymer

Hamidi N et al., A Novel Potentiometric Ni2+-Sensor based on a Ni2+ Ion-Imprinted Polymer.
Analytical & Bioanalytical Electrochemistry, 10, (2), 281-291, (2018)
   

imprinted polymer

Kudupoje MB et al., Contractile Response of Bovine Lateral Saphenous Vein to Ergotamine Tartrate Exposed to Different Concentrations of Molecularly Imprinted Polymer.
Toxins, 10, (2), ArticleNo58-(2018)
   

Imprinted-polymer

Neolaka YAB et al., Characterization, isotherm, and thermodynamic data for selective adsorption of Cr(VI) from aqueous solution by Indonesia (Ende-Flores) natural zeolite Cr(VI)-imprinted-poly(4-VP-co-EGDMA)-ANZ (IIP-ANZ).
Data in Brief, 17, 1020-1029, (2018)
   

imprinted polymer

Toloza CAT et al., Kanamycin detection at graphene quantum dot-decorated gold nanoparticles in organized medium after solid-phase extraction using an aminoglycoside imprinted polymer.
MethodsX, 5, 1605-1612, (2018)
   

imprinted polymer

Akhoundian M et al., Ultra-trace detection of methamphetamine in biological samples using FFT-square wave voltammetry and nano-sized imprinted polymer/MWCNTs -modified electrode.
Talanta, 200, 115-123, (2019)
   

imprinted polymer

Alizadeh T et al., Molecularly imprinted polymer nano-sphere/multi-walled carbon nanotube coated glassy carbon electrode as an ultra-sensitive voltammetric sensor for picomolar level determination of RDX.
Talanta, 194, 415-421, (2019)
   

imprinted polymer

Alizadeh T et al., A carbon nanotubes/graphite paste electrode impregnated with stavudine-imprinted polymer as a stavudine selective sensor.
Ionics, 25, (12), 6071-6081, (2019)
   

imprinted polymer

Alizadeh T et al., Highly selective extraction and voltammetric determination of the opioid drug buprenorphine via a carbon paste electrode impregnated with nano-sized molecularly imprinted polymer.
Microchimica Acta, 186, (9), Article654-(2019)
   

imprinted polymer

Baghel A et al., Synthesis and Characterisation of Ligand Free Cadmium Imprinted Polymer for Sensing of Cd(II) from Aqueous Solution.
Defence Life Science Journal, 4, (3), 153-157, (2019)
   

imprinted polymer

Boitard C et al., Biological Fate of Magnetic Protein-Specific Molecularly Imprinted Polymers: Toxicity and Degradation.
ACS Applied Materials & Interfaces, 11, (39), 35556-35565, (2019)
   

imprinted polymer

Khalifa ME et al., Molecular imprinted polymer based sensor for recognition and determination of profenofos organophosphorous insecticide.
Biosensors and Bioelectronics: X, 2, Article100027-(2019)
   

imprinted polymer

Liu YC et al., Supramolecularly imprinted polymeric solid phase microextraction coatings for synergetic recognition nitrophenols and bisphenol A.
Journal of Hazardous Materials, 368, 358-364, (2019)
   

imprinted polymer

Masoumi F et al., Synthesis, characterization and application of a new nano-structured samarium(III) ion-imprinted polymer.
Polymer Bulletin, 76, (11), 5499-5516, (2019)
   

imprinted polymer

Mirzajani R et al., Construction and Evaluation of a Graphene Oxide Functionalized Aminopropyltriethoxy Silane Surface Molecularly Imprinted Polymer Potentiometric Sensor for Dipyridamole Detection in Urine and Pharmaceutical Samples.
Journal of the Brazilian Chemical Society, 30, (9), 1874-1886, (2019)
   

imprinted polymer

Yusof NF et al., Fabrication and binding characterization of ion imprinted polymers for highly selective Co2+ ions in an aqueous medium.
Journal of Environmental Chemical Engineering, 7, (2), Article103007-(2019)
   

imprinted polymer

Zhu GF et al., Water compatible imprinted polymer prepared in water for selective solid phase extraction and determination of ciprofloxacin in real samples.
Talanta, 200, 307-315, (2019)
   

imprinted polymer

Zhu GF et al., Using ionic liquid monomer to improve the selective recognition performance of surface imprinted polymer for sulfamonomethoxine in strong polar medium.
Journal of Chromatography A, 1592, 38-46, (2019)
   

imprinted polymer

Garza-Montelongo E et al., Molecularly Imprinted Polymer for the Binding and Recognition of Basic Blue 41 Dye.
Journal of the Chilean Chemical Society, 66, (2), 5215-5219, (2021)
   

imprinted polymer

Khalifa ME et al., Molecularly Imprinted Polymer Based GCE for Ultra-sensitive Voltammetric and Potentiometric Bio Sensing of Topiramate.
Analytical Sciences, 37, (7), 955-962, (2021)
   

imprinted polymer

Rouhi M et al., Role of Comonomers in the Recognition of Anionic Biomolecules in Water: Hydrogen-Bonded Imprinted Polymeric Receptor.
ACS Applied Polymer Materials, 3, (10), 4904-4912, (2021)
   

imprinted polymer and adsorption

Stevens M et al., Selective and Simultaneous Removal of Ni (II) and Cu (II) Ions from Industrial Wastewater Employing a Double Ni-Cu-Ion Imprinted Polymer.
International Journal of Advanced Engineering Research and Science, 5, (6), 222-230, (2018)
   

Imprinted polymer beads

Prasad BB et al., Development of water compatible imprinted polymer beads for piezoelectric sensing of ultra-trace 5,6-dihydrouracil in biological fluids.
Sensors and Actuators B: Chemical, 235, 94-102, (2016)
   

Imprinted polymer coating

Yao JM et al., Specific recognition of cationic paraquat in environmental water and vegetable samples by molecularly imprinted stir-bar sorptive extraction based on monohydroxylcucurbit[7]uril-paraquat inclusion complex.
Microchimica Acta, 187, (10), Article578-(2020)
   

imprinted polymeric film

Guo HS et al., Imprinted polymeric film-based sensor for the detection of dopamine using cyclic voltammetry.
Chinese Journal of Chemistry, 21, (12), 1624-1629, (2003)
   

Imprinted Polymeric Materials

Tommasini M et al., Monitoring of Irinotecan in Human Plasma: Sensitive Fluorescent Nanogels by Molecular Imprinting.
ChemRxiv, (2019)
   

IMPRINTED POLYMERIC MEMBRANES

Overdevest PEM et al., Langmuir isotherms for enantioselective complexation of (d/l)-phenylalanine by cholesteryl-l-glutamate in nonionic micelles.
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 163, (2-3), 209-224, (2000)
   

IMPRINTED POLYMERIC MEMBRANES

Yoshikawa M et al., Novel membrane materials having EEE derivatives as a chiral recognition site.
European Polymer Journal, 37, (2), 335-342, (2001)
   

IMPRINTED POLYMERIC MEMBRANES

Yoshikawa M et al., Chiral recognition sites converted from tetrapeptide derivatives adopting racemates as print molecules.
Macromolecular Bioscience, 3, (9), 487-498, (2003)
   

Imprinted polymeric nanostructures

Zarezadeh A et al., Application of a nano-structured molecularly imprinted polymer as an efficient modifier for the design of captopril drug selective sensor: Mechanism study and quantitative determination.
Materials Science and Engineering: C, 94, 879-885, (2019)
   

imprinted polymeric stationary phase

Chen YB et al., Influence of the pH on the behavior of an imprinted polymeric stationary phase - supporting evidence for a binding site model.
Journal of Chromatography A, 927, (1-2), 1-17, (2001)
   

Imprinted polymer inclusion membrane

Vishnuvardhan V et al., Fabrication and topographical analysis of non-covalently imprinted polymer inclusion membranes for the selective sensing of pinacolyl methylphosphonate--A simulant of Soman.
Electrochimica Acta, 52, (24), 6922-6928, (2007)
   

Imprinted polymer inclusion membrane

Vishnuvardhan V et al., Imprinted Polymer Inclusion Membrane Based Potentiometric Sensor for Determination and Quantification of Diethyl Chlorophosphate in Natural Waters.
American Journal of Analytical Chemistry, 2, (3), 376-382, (2011)
   

Imprinted polymer inclusion membrane sensor

Prasad K et al., Design and Development of Imprinted Polymer Inclusion Membrane-Based Field Monitoring Device for Trace Determination of Phorate (O,O-Diethyl S-Ethyl Thiomethyl Phophorodithioate) in Natural Waters.
Electroanalysis, 19, (11), 1195-1200, (2007)
   

Imprinted polymerized organogels

Zhang SZ et al., Cholesterol Imprinted Polymerized Organogel Formed by Polymerizable Gelator and Adsorption Ability.
Acta Polymerica Sinica, (3), 244-248, (2009)
   

imprinted polymer membrane

Fan PM et al., Preparation of molecularly imprinted polymer membrane with blending trimethoprim-MIP and polysulfone and its transport properties.
Korean Journal of Chemical Engineering, 26, (6), 1813-1820, (2009)
   

imprinted polymer membrane

Liu W et al., Preparation and application of Norfloxacin-MIP/polysulfone blending molecular imprinted polymer membrane.
Journal of Applied Polymer Science, 113, (2), 1125-1132, (2009)
   

IMPRINTED POLYMER MEMBRANES

Hilal N et al., Surface modified microfiltration membranes with molecularly recognising properties.
Journal of Membrane Science, 213, (1-2), 97-113, (2003)
   

IMPRINTED POLYMER MEMBRANES

Koter I et al., Kinetic resolution of chiral alcohols in bifunctional membrane exhibiting enzyme activity and enantioselective permeation.
Journal of Molecular Catalysis B: Enzymatic, 24-25, (1), 17-26, (2003)
   

Imprinted polymer microsphere

Zhang W et al., Synthesis of salicylic acid imprinted polymer microspheres via emulsion polymerization.
Journal of Chemical Industry and Engineering (China), 59, (6), 1551-1555, (2008)
   

imprinted polymer modified hanging mercury drop electrode

Prasad BB et al., Imprinted polymer - Modified hanging mercury drop electrode for differential pulse adsorptive stripping voltammetric analysis of a diquat herbicide.
Electroanalysis, 15, (2), 108-114, (2003)
   

imprinted polymer monolith

Li H et al., Adsorption isotherms and sites distribution of caffeic acid - imprinted polymer monolith from frontal analysis.
Chromatographia, 60, (7-8), 425-431, (2004)
   

imprinted polymer monolith

Zheng C et al., Thermodynamic studies on 4-hydroxybenzoic acid-imprinted polymer monolith by frontal analysis.
Chemical Journal of Chinese Universities, 28, (8), 1443-1448, (2007)
   

imprinted polymer nanocarriers

Zheng L et al., Molecularly imprinted polymer nanocarriers for recognition and sustained release of diclofenac.
Polymers for Advanced Technologies, 29, (5), 1360-1371, (2018)
   

Imprinted polymer nanoparticles

Alizadeh T et al., Graphene/nano-sized Imprinted Polymer/poly(methyl methacrylate) Nanocomposite as a New Gas Sensor for the Determination of Nitrobenzene Vapors.
Analytical & Bioanalytical Electrochemistry, 9, (8), 1070-1079, (2017)
   

Imprinted polymer nanoparticles

Dehgan-Reyhan S et al., Preparation of Molecularly Imprinted Polymers-Based Electrochemical Renewable Ceramic Electrode as a Sensitive Uranyl Ions Sensor.
Sensor Letters 16 48-53 (2018)
   

Imprinted polymer nanoparticles

Bojdi MK et al., Material Design of a Chromium Imprinted Polymer and its Application as a Highly Selective Electrochemical Sensor for Determining Chromium Ion at Trace Levels.
ChemistrySelect, 6, (43), 11939-11947, (2021)
   

IMPRINTED POLYMER NANOSPHERES

Weber A et al., Modular construction of biochips by microstructured deposition of functional nanoparticles.
Chemie Ingenieur Technik, 75, (4), 437-441, (2003)
   

imprinted polymer networks

Rimmer S, Synthesis of molecular imprinted polymer networks.
Chromatographia, 47, (7-8), 470-474, (1998)
   

imprinted polymer networks

Steinke JHG et al., A simple polymerisable carboxylic acid receptor: 2-acrylamido pyridine.
TrAC Trends in Analytical Chemistry, 18, (3), 159-164, (1999)
   

imprinted polymers

Li K et al., New crown-ether resins prepared by cationic template polymerization.
Macromolecular Chemistry And Physics, 195, (2), 391-399, (1994)
   

imprinted polymers

Hwang KO et al., Template-assisted assembly of metal binding sites on a silica surface.
Materials Science & Engineering C-Biomimetic Materials Sensors And Systems, 3, (2), 137-141, (1995)
   

imprinted polymers

Spurlock LD et al., Selectivity and sensitivity of ultrathin purine-templated overoxidized polypyrrole film electrodes.
Analytica Chimica Acta, 336, (1-3), 37-46, (1996)
   

imprinted polymers

Makote R et al., Template recognition in inorganic-organic hybrid films prepared by the sol-gel process.
Chemistry of Materials, 10, (9), 2440-2445, (1998)
   

imprinted polymers

Sajonz P et al., Study of the thermodynamics and mass transfer kinetics of two enantiomers on a polymeric imprinted stationary phase.
Journal of Chromatography A, 810, (1-2), 1-17, (1998)
   

imprinted polymers

Wulff G, Fitting molecules into polymeric receptors.
Chemtech, 28, (11), 19-26, (1998)
   

imprinted polymers

Brune BJ et al., Correlation between adsorption and small molecule hydrogen bonding.
Langmuir, 15, (11), 3987-3992, (1999)
   

imprinted polymers

Ju JY et al., Imprinted polymers as tools for the recovery of secondary metabolites produced by fermentation.
Biotechnology and Bioengineering, 64, (2), 232-239, (1999)
   

imprinted polymers

Piletsky SA et al., Receptor and transport properties of imprinted polymer membranes - a review.
Journal of Membrane Science, 157, (2), 263-278, (1999)
   

imprinted polymers

Suárez-Rodríguez JL et al., Molecularly imprinted polymers for developing biomimetic optical sensors.
Quimica Analitica, 18, (Suppl 1), 20-22, (1999)
   

imprinted polymers

Al-Kindy S et al., Molecularly imprinted polymers and optical sensing applications.
Critical Reviews in Analytical Chemistry, 30, (4), 291-309, (2000)
   

imprinted polymers

Gübitz G et al., Chiral separation by capillary electrochromatography.
Enantiomer, 5, 5-11, (2000)
   

imprinted polymers

Kanekiyo Y et al., Novel nucleotide-responsive hydrogels designed from copolymers of boronic acid and cationic units and their applications as a QCM resonator system to nucleotide sensing.
Journal of Polymer Science Part A: Polymer Chemistry, 38, (8), 1302-1310, (2000)
   

imprinted polymers

Brüggemann O, Study of catalytically active, molecularly characterised polymers considering aspects of chemical reaction engineering.
Chemie Ingenieur Technik, 73, (4), 373-377, (2001)
   

imprinted polymers

Dickert FL et al., Synthetic receptors as sensor coatings for molecules and living cells.
Analyst, 126, (6), 766-771, (2001)
   

imprinted polymers

Rathbone DL et al., Selectivity of response in fluorescent polymers imprinted with N1-benzylidene pyridine-2-carboxamidrazones.
Analytica Chimica Acta, 435, (1), 129-136, (2001)
   

imprinted polymers

Zhang HQ et al., 9-(Guanidinomethyl)-10-vinylanthracene: a suitable fluorescent monomer for MIPs.
Tetrahedron Letters, 42, (26), 4413-4416, (2001)
   

imprinted polymers

Alvarez-Lorenzo C et al., Soft contact lenses capable of sustained delivery of timolol.
Journal of Pharmaceutical Sciences, 91, (10), 2182-2192, (2002)
   

imprinted polymers

Fujiwara M et al., A sol-gel method using tetraethoxysilane and acetic anhydride: Immobilization of cubic [mu]-oxo Si-Ti complex in a silica matrix.
Chemistry of Materials, 14, (12), 4975-4981, (2002)
   

imprinted polymers

Lemay P, The use of high pressure for separation and production of bioactive molecules.
Biochimica et Biophysica Acta - Protein Structure and Molecular Enzymology, 1595, (1-2), 357-366, (2002)
   

imprinted polymers

Liu GD et al., Utilization of synergetic effect of weak interactions in the design of polymeric sorbents with high sorption selectivity.
Journal of Chromatography A, 952, (1-2), 71-78, (2002)
   

imprinted polymers

Peppas NA et al., Polymers and gels as molecular recognition agents.
Pharmaceutical Research, 19, (5), 578-587, (2002)
   

imprinted polymers

Takeuchi T et al., Synthetic receptors prepared by organized assembly of organic molecules.
IEEE Engineering in Medicine and Biology Magazine, 21, (6), 144-150, (2002)
   

imprinted polymers

Wandelt B et al., Fluorescent molecularly imprinted polymer studied by time-resolved fluorescence spectroscopy.
Polymer, 43, (9), 2777-2785, (2002)
   

imprinted polymers

Davidson L et al., Synthesis and evaluation of a solid supported molecular tweezer type receptor for cholesterol.
Journal of Materials Chemistry, 13, (4), 758-766, (2003)
   

imprinted polymers

Davis ME, Reflections on routes to enantioselective solid catalysts.
Topics In Catalysis, 25, (1-4), 3-7, (2003)
   

imprinted polymers

Dickert F et al., Borderline applications of QCM-devices: synthetic antibodies for analytes in both nm- and mm-dimensions.
Sensors and Actuators B: Chemical, 95, (1-3), 20-24, (2003)
   

imprinted polymers

Dickert FL et al., Nano- and micro-structuring of sensor materials - from molecule to cell detection.
Synthetic Metals, 138, (1-2), 65-69, (2003)
   

imprinted polymers

Kubo T et al., On-column concentration of bisphenol A with one-step removal of humic acids in water.
Journal of Chromatography A, 987, (1-2), 389-394, (2003)
   

imprinted polymers

Lack O et al., Selectivity of molecular recognition displayed by monoclonal antibodies as compared to receptors - a new approach to screen combinatorial libraries.
Helvetica Chimica Acta, 86, (11), 3594-3600, (2003)
   

imprinted polymers

Langer R et al., Advances in biomaterials, drug delivery, and bionanotechnology.
AIChE Journal, 49, (12), 2990-3006, (2003)
   

imprinted polymers

Le Fur E et al., Excavations in molecular crystals.
Chemical Communications, (24), 2966-2967, (2003)
   

imprinted polymers

Molochnikov LS et al., Coordination of Cu(II) and Ni(II) in polymers imprinted so as to optimize amine chelate formation.
Polymer, 44, (17), 4805-4815, (2003)
   

imprinted polymers

Tamayo FG et al., Highly selective fenuron-imprinted polymer with a homogeneous binding site distribution prepared by precipitation polymerisation and its application to the clean-up of fenuron in plant samples.
Analytica Chimica Acta, 482, (2), 165-173, (2003)
   

imprinted polymers

Zhou YX et al., Potentiometric sensing of chiral amino acids.
Chemistry of Materials, 15, (14), 2774-2779, (2003)
   

imprinted polymers

Kirsch N et al., Sacrificial spacer and non-covalent routes toward the molecular imprinting of "poorly-functionalized" N-heterocycles.
Analytica Chimica Acta, 504, (1), 63-71, (2004)
   

imprinted polymers

Kist TBL et al., Separation of biomolecules using electrophoresis and nanostructures.
Electrophoresis, 25, (21-22), 3492-3497, (2004)
   

imprinted polymers

Kubo T et al., Toxicity recognition of hepatotoxin, homologues of microcystin with artificial trapping devices.
Journal of Environmental Science and Health Part A-Toxic/Hazardous Substances & Environmental Engineering, 39, (10), 2597-2614, (2004)
   

imprinted polymers

Lavignac N et al., Current status of molecularly imprinted polymers as alternatives to antibodies in sorbent assays.
Analytica Chimica Acta, 510, (2), 139-145, (2004)
   

imprinted polymers

Meier MAR et al., Combinatorial methods, automated synthesis and high-throughput screening in polymer research: The evolution continues.
Macromolecular Rapid Communications, 25, (1), 21-33, (2004)
   

imprinted polymers

Pogorelova SP et al., Development of ion-sensitive field-effect transistor-based sensors for benzylphosphonic acids and thiophenols using molecularly imprinted TiO2 films.
Analytica Chimica Acta, 504, (1), 113-122, (2004)
   

imprinted polymers

Raitman OA et al., Analysis of NAD(P)+ and NAD(P)H cofactors by means of imprinted polymers associated with Au surfaces: A surface plasmon resonance study.
Analytica Chimica Acta, 504, (1), 101-111, (2004)
   

imprinted polymers

Turiel E et al., Molecularly imprinted polymers: towards highly selective stationary phases in liquid chromatography and capillary electrophoresis.
Analytical and Bioanalytical Chemistry, 378, (8), 1876-1886, (2004)
   

imprinted polymers

Book chapter, Vilar R, Hydrogen-bonding templated assemblies, 
In: Supramolecular Assembly via Hydrogen Bonds II, Mingos DMP (Ed.) 
Springer Verlag: Berlin, 85-137, (2004)    

imprinted polymers

Wang N et al., Preparation of 4- chlorophenoxy acetic acid molecularly imprinted polymers and study of its performance.
Chemical Sensors (China), 24, (1), 25-29, (2004)
   

imprinted polymers

Cunliffe D et al., Molecularly imprinted drug delivery systems.
Advanced Drug Delivery Reviews, 57, (12), 1836-1853, (2005)
   

imprinted polymers

Kuzmic AE, The synthesis and application of molecularly imprinted polymers [Sinteza i primjena molekulski tiskanih polimera].
Polimeri (Zagreb), 25, (4), 122-131, (2005)
   

imprinted polymers

Tamayo FG et al., Clean up of phenylurea herbicides in plant sample extracts using molecularly imprinted polymers.
Analytical and Bioanalytical Chemistry, 381, (6), 1234-1240, (2005)
   

imprinted polymers

Tamayo FG et al., Evaluation of new selective molecularly imprinted polymers prepared by precipitation polymerisation for the extraction of phenylurea herbicides.
Journal of Chromatography A, 1069, (2), 173-181, (2005)
   

imprinted polymers

Wolman FJ et al., Peptide imprinted polymer synthesized by radiation-induced graft polymerization.
Reactive and Functional Polymers, 66, (11), 1199-1205, (2006)
   

imprinted polymers

Rao TP et al., Potentiometric transducer based biomimetic sensors for priority envirotoxic markers--An overview.
Talanta, 76, (3), 485-496, (2008)
   

imprinted polymers

Cirillo G et al., Imprinted hydrophilic nanospheres as drug delivery systems for 5-fluorouracil sustained release.
Journal of Drug Targeting, 17, (1), 72-77, (2009)
   

imprinted polymers

Cizmárik A et al., Studies of local anesthetics. Part: 187 Extraction of 1-methyl-2- piperidinoethylesters of alkoxyphenylcarbamic acids from human plasma by imprinted polymers and its comparison with classic solid phase extraction.
Ceska a Slovenska Farmacie, 58, (2), 78-82, (2009)
   

imprinted polymers

Pereira LA et al., Molecularly imprinted solid-phase extraction for the determination of fenitrothion in tomatoes.
Analytical and Bioanalytical Chemistry, 393, (3), 1063-1072, (2009)
   

imprinted polymers

Book chapter, Theodoridis GAet al., Affinity Chromatography: Molecularly Imprinted Polymers, 
In: Encyclopedia of Chromatography, Third Edition, Cazes J (Ed.) 
Taylor & Francis: 24-30, (2009)    

imprinted polymers

Wang Y et al., Synthesis of Dimethomorph Imprinted Polymers and Molecularly Imprinted Solid-phase Extraction Analysis.
Guangdong Chemical Industry, 37, (7), 39-43, (2010)
   

imprinted polymers

Latif U et al., Conductometric Sensors for Monitoring Degradation of Automotive Engine Oil.
Sensors, 11, (9), 8611-8625, (2011)
   

imprinted polymers

Pereira E et al., Complexing Polymer Films in The Preparation of Modified Electrodes for Detection of Metal Ions.
Macromolecular Symposia, 304, (1), 115-125, (2011)
   

imprinted polymers

Willner I et al., Electroanalytical Applications of Metallic Nanoparticles and Supramolecular Nanostructures.
Electroanalysis, 23, (1), 13-28, (2011)
   

imprinted polymers

Bonomi P et al., Modulation of imprinting efficiency in nanogels with catalytic activity in the Kemp elimination.
Journal of Molecular Recognition, 25, (6), 352-360, (2012)
   

imprinted polymers

Hansen JS et al., Arylboronic acids: A diabetic eye on glucose sensing.
Sensors and Actuators B: Chemical, 161, (1), 45-79, (2012)
   

imprinted polymers

Proceeding, Kang YF et al, Synthesis, Characterization and its Application of Cu2+ Ion Imprinted Polymers, 
In: Advanced Materials Research, Ren NQ, Che LK, Jin B, Dong RJ, Su HQ (Eds.), 
2333-2338, (2012)
   

imprinted polymers

Resmini M, Molecularly imprinted polymers as biomimetic catalysts.
Analytical and Bioanalytical Chemistry, 402, (10), 3021-3026, (2012)
   

imprinted polymers

Sianipar A et al., Effect Of Degree Binary Complex Of Imprint Ion On The Extraction Of Zircon Ion.
IOSR Journal of Applied Chemistry, 1, (4), 15-19, (2012)
   

imprinted polymers

Azenha M et al., Vapor-phase testing of the memory-effects in benzene- and toluene-imprinted polymers conditioned at elevated temperature.
Analytica Chimica Acta, 802, 40-45, (2013)
   

imprinted polymers

He FF et al., Magnetic Th(IV)-ion imprinted polymers with salophen schiff base for separation and recognition of Th(IV).
Journal of Radioanalytical and Nuclear Chemistry, 295, (1), 167-177, (2013)
   

imprinted polymers

Nicolescu TV et al., A new microemulsion approach for producing molecularly imprinted polymers with selective recognition cavities for gallic acid.
Polymer International, 62, (6), 949-956, (2013)
   

imprinted polymers

Yemis F et al., Molecularly imprinted polymers and their synthesis by different methods.
Polymers & Polymer Composites, 21, (3), 145-150, (2013)
   

imprinted polymers

Alizadeh T, Synthesis of a nano-sized chiral imprinted polymer and its use as an (S)-atenolol carrier in the bulk liquid membrane.
Journal of Separation Science, 37, (14), 1887-1895, (2014)
   

imprinted polymers

Díaz-Álvarez M et al., Evaluation of electrochemically synthesized sulfadimethoxine-imprinted polymer for solid-phase microextraction of sulfonamides.
Journal of Molecular Recognition, 27, (6), 415-420, (2014)
   

imprinted polymers

Díaz-Álvarez M et al., Supported liquid membrane-protected molecularly imprinted beads for micro-solid phase extraction of sulfonamides in environmental waters.
Journal of Chromatography A, 1357, 158-164, (2014)
   

imprinted polymers

Suwanwong Y et al., Effects of Polymerization Methods and Functional Monomers on Curcumin Imprinted Polymer Properties.
Separation Science and Technology, 49, (7), 1086-1095, (2014)
   

imprinted polymers

Gour DG et al., Molecularly imprinted polymer for detection of endocrine disrupting chemical epinephrine in drinking water and biological buffers.
Indian Journal of Chemistry, 54A, (8), 1051-1056, (2015)
   

imprinted polymers

Liu GY et al., Preparation of a magnetic molecularly imprinted polymer using g-C3N4-Fe3O4 for atrazine adsorption.
Materials Letters, 160, 472-475, (2015)
   

imprinted polymers

Book chapter, Mirata Fet al., Molecularly Imprinted Polymers for Catalysis and Synthesis, 
In: Molecularly Imprinted Polymers in Biotechnology, Mattiasson B, Ye L (Eds.) 
Springer: Berlin,Heidelberg, 107-129, (2015)    

imprinted polymers

Barahona F et al., Molecularly imprinted polymer-coated hollow fiber membrane for the microextraction of triazines directly from environmental waters.
Journal of Chromatography A, 1442, 12-18, (2016)
   

imprinted polymers

Guo XH et al., Preparation and characterization of imprinted microspheres for clopyralid.
Journal of Macromolecular Science, Part A, 53, (1), 34-40, (2016)
   

imprinted polymers

Pellizzoni E et al., Fluorescent molecularly imprinted nanogels for the detection of anticancer drugs in human plasma.
Biosensors and Bioelectronics, 86, 913-919, (2016)
   

imprinted polymers

Plotka-Wasylka J et al., Modern trends in solid phase extraction: New sorbent media.
TrAC Trends in Analytical Chemistry, 77, 23-43, (2016)
   

imprinted polymers

Tavengwa NT et al., Modeling of adsorption isotherms and kinetics of uranium sorption by magnetic ion imprinted polymers.
Toxicological & Environmental Chemistry, 98, (1), 1-12, (2016)
   

imprinted polymers

Turiel E et al., Supported liquid membrane-protected molecularly imprinted beads for the solid phase micro-extraction of triazines from environmental waters.
Journal of Chromatography A, 1432, 1-6, (2016)
   

imprinted polymers

Uzuriaga-Sánchez RJ et al., Magnetically separable polymer (Mag-MIP) for selective analysis of biotin in food samples.
Food Chemistry, 190, 460-467, (2016)
   

imprinted polymers

Zhu YZ et al., Fabrication of magnetic imprinted sorbents prepared by Pickering emulsion polymerization for adsorption of erythromycin from aqueous solution.
Journal of Environmental Chemical Engineering, 4, (3), 3570-3579, (2016)
   

imprinted polymers

Akbari-Adergani B et al., Integrated photografted molecularly imprinted polymers with a cellulose acetate membrane for the extraction of melamine from dry milk before HPLC analysis.
Journal of Separation Science, 40, (6), 1361-1368, (2017)
   

imprinted polymers

Gam-Derouich S et al., Imprinted Photonic Hydrogels for the Size- and Shell-Selective Recognition of Nanoparticles.
Angewandte Chemie International Edition, 56, (33), 9710-9714, (2017)
   

imprinted polymers

Plotka-Wasylka J et al., New Polymeric Materials for Solid Phase Extraction.
Critical Reviews in Analytical Chemistry, 47, (5), 373-383, (2017)
   

imprinted polymers

Roy E et al., Introduction of selectivity and specificity to graphene using an inimitable combination of molecular imprinting and nanotechnology.
Biosensors and Bioelectronics, 89, (Part 1), 234-248, (2017)
   

imprinted polymers

Zulfikar MA et al., Separation of Yttrium from Aqueous Solution Using Ionic Imprinted Polymers.
Russian Journal of Non-Ferrous Metals, 58, (6), 614-624, (2017)
   

imprinted polymers

Díaz-Álvarez M et al., Hollow Fibre Membrane-Protected Molecularly Imprinted Microsolid-Phase Extraction (HFM-Protected-MI-MSPE) of Triazines from Soil Samples.
Separations, 5, (1), ArticleNo8-(2018)
   

imprinted polymers

Díaz-Álvarez M et al., Hollow fiber membrane-protected molecularly imprinted microspheres for micro solid-phase extraction and clean-up of thiabendazole in citrus samples.
Journal of Chromatography A, 1531, 39-45, (2018)
   

imprinted polymers

Mukami HW et al., Application of a Custom-Synthesized Molecularly Imprinted Polymer for the Selective Isolation of Total Glucose and Fructose from 100% Fruit Juice Samples Prior to Instrumental Analysis.
Molecular Imprinting, 5, (1), ArticleNo16-(2018)
   

imprinted polymers

Saadati F et al., Synthesis and characterization of nanostructure molecularly imprinted polyaniline/graphene oxide composite as highly selective electrochemical sensor for detection of p-nitrophenol.
Journal of the Taiwan Institute of Chemical Engineers, 86, 213-221, (2018)
   

imprinted polymers

Korde BA et al., Nanoporous imprinted polymers (nanoMIPs) for controlled release of cancer drug.
Materials Science and Engineering: C, 99, 222-230, (2019)
   

imprinted polymers

Zhang JW et al., Debittering of lemon juice using surface molecularly imprinted polymers and the utilization of limonin.
Journal of Chromatography B, 1104, 205-211, (2019)
   

imprinted polymers

Zhu GF et al., A new ionic liquid surface-imprinted polymer for selective solid-phase-extraction and determination of sulfonamides in environmental samples.
Journal of Separation Science, 42, (3), 725-735, (2019)
   

imprinted polymers

Arreguin-Campos R et al., Biomimetic sensing of Escherichia coli at the solid-liquid interface: From surface-imprinted polymer synthesis toward real sample sensing in food safety.
Microchemical Journal, 169, Article106554-(2021)
   

Imprinted polymer-silica gel

Sharma PS et al., Highly Sensitive and Selective Detection of Creatinine by Combined Use of MISPE and a Complementary MIP-Sensor.
Chromatographia, 65, (7), 419-427, (2007)
   

Imprinted poly(methacrylic acid-co-ethylene glycol methacrylate)

Huang CY et al., A portable potentiostat for the bilirubin-specific sensor prepared from molecular imprinting.
Biosensors and Bioelectronics, 22, (8), 1694-1699, (2007)
   

Imprinted poly(o-phenylenediamine) membranes

Kong L et al., Molecularly imprinted sensor based on electropolmerized poly(o-phenylenediamine) membranes at reduced graphene oxide modified electrode for imidacloprid determination.
Sensors and Actuators B: Chemical, 185, 424-431, (2013)
   

Imprinted poly(tetraethoxysilanol)

Tsai HA et al., Preparation of imprinted poly(tetraethoxysilanol) sol-gel for the specific uptake of creatinine.
Chemical Engineering Journal, 168, (3), 1369-1376, (2011)
   

imprinted porous polymer

Book chapter, Kim YSet al., Preparation and Characteristics of Poly(St-co-MAA) Microgels, 
In: Grid and Distributed Computing, Kim T, Adeli H, Cho H, Gervasi O, Yau SS, Kang BH, Villalba JG (Eds.) 
Springer Berlin Heidelberg: 263-270, (2011)    

Imprinted protein

Gutierrez RAV et al., Bioimprinting as a tool for the detection of aflatoxin B1 using a capacitive biosensor.
Biotechnology Reports, 11, 12-17, (2016)
   

Imprinted protein

Pidenko P et al., Imprinted proteins as a receptor for detection of zearalenone.
Analytica Chimica Acta, 1040, 99-104, (2018)
   

Imprinted protein

Burmistrova NA et al., Soft glass multi-channel capillaries as a platform for bioimprinting.
Talanta, 208, Article120445-(2020)
   

imprinted proteins

Mishra P et al., Structural basis for the molecular memory of imprinted proteins in anhydrous media.
Biotechnology and Bioengineering, 52, (5), 609-614, (1996)
   

Imprinted ratio

Wang Y et al., Study on the Melamine Molecularly Imprinted Polymer by Computer Aided Design.
Acta Polymerica Sinica, (6), 641-649, (2015)
   

imprinted resin

Liu YC et al., Comparison between two commercial uranium resins and a uranyl sulphate imprinted resin based on self-assembling MIT.
Frontiers of Chemical Engineering in China, 1, (4), 327-331, (2007)
   

Imprinted self-assembled monolayer

Vikholm-Lundin I et al., A comparative evaluation of molecular recognition by monolayers composed of synthetic receptors or oriented antibodies.
Biosensors and Bioelectronics, 24, (4), 1036-1038, (2008)
   

Imprinted self-assembled monolayers

Book chapter, Sharma PSet al., Molecular Imprinting for Selective Sensing of Explosives, Warfare Agents, and Toxins, 
In: Portable Chemical Sensors, Nikolelis D (Ed.) 
Springer Netherlands: 63-94, (2012)    

imprinted sensor

Luo LJ et al., Study on Nano-materials Modified Highly Sensitive L-phenylalaine Imprinted Sol-Gel Sensor.
Journal of Instrumental Analysis, 30, (5), 473-480, (2011)
   

imprinted sensor

Hu YF et al., Selective and sensitive molecularly imprinted sol-gel film-based electrochemical sensor combining mercaptoacetic acid-modified PbS nanoparticles with Fe₃O₄@Au-multi-walled carbon nanotubes-chitosan.
Journal of Solid State Electrochemistry, 16, (3), 857-867, (2012)
   

imprinted sensor

Zhang ZH et al., A sensitive and selective molecularly imprinted sensor combined with magnetic molecularly imprinted solid phase extraction for determination of dibutyl phthalate.
Biosensors and Bioelectronics, 49, 367-373, (2013)
   

imprinted sensor

Long F et al., Magnetic imprinted electrochemical sensor combined with magnetic imprinted solid-phase extraction for rapid and sensitive detection of tetrabromobisphenol S.
Journal of Electroanalytical Chemistry, 777, 58-66, (2016)
   

imprinted sensor

Patra S et al., Nanocomposite of bimetallic nanodendrite and reduced graphene oxide as a novel platform for molecular imprinting technology.
Analytica Chimica Acta, 918, 77-88, (2016)
   

IMPRINTED SILICA

Moreau JJE et al., The design of selective catalysts from hybrid silica-based materials.
Coordination Chemistry Reviews, 178-180, (2), 1073-1084, (1998)
   

imprinted silica gel

de Avila TC et al., Employ of Silica Gel Organically Modified and Ionically Imprinted for Selective On-Line Preconcentration of Copper Ions.
Quimica Nova, 33, (2), 301-308, (2010)
   

Imprinted silica gel sorbent

Ding LL et al., Synthesis and Characteristics of Al(III)-Imprinted Silica Gel Sorbent.
Asian Journal of Chemistry, 25, (14), 7817-7819, (2013)
   

Imprinted silica-supported sorbent

Liu YW, Selective sorption of Pb(II) from aqueous solution using an imprinted silica-supported sorbent based on the solgel imprinting technique.
Desalination and Water Treatment, 57, (39), 18417-18424, (2016)
   

Imprinted site

Li LF et al., Temperature and magnetism bi-responsive molecularly imprinted polymers: Preparation, adsorption mechanism and properties as drug delivery system for sustained release of 5-fluorouracil.
Materials Science and Engineering: C, 61, 158-168, (2016)
   

imprinted sol-gel

Zhang ZH et al., Novel Layer-by-layer Assembly Multi-walled Carbon Nanotube/Resveratrol Imprinted Sol-gel Electrochemical Sensor.
Acta Chimica Sinica, 68, (5), 431-436, (2010)
   

Imprinted sol-gel

Zhang ZH et al., Electrochemical layer-by-layer modified imprinted sensor based on multi-walled carbon nanotubes and sol-gel materials for sensitive determination of thymidine.
Journal of Electroanalytical Chemistry, 644, (1), 7-12, (2010)
   

imprinted sol-gel

Hu YF et al., Electrochemical determination of l-phenylalanine at polyaniline modified carbon electrode based on β-cyclodextrin incorporated carbon nanotube composite material and imprinted sol-gel film.
Talanta, 84, (2), 305-313, (2011)
   

imprinted sol-gel

Zhang J et al., A molecularly imprinted electrochemical sensor based on sol-gel technology and multiwalled carbon nanotubes-Nafion functional layer for determination of 2-nonylphenol in environmental samples.
Sensors and Actuators B: Chemical, 193, 844-850, (2014)
   

imprinted sol-gel

Güney S et al., Selective electrochemical sensor for theophylline based on an electrode modified with imprinted sol-gel film immobilized on carbon nanoparticle layer.
Sensors and Actuators B: Chemical, 208, 307-314, (2015)
   

imprinted sol-gel

Dhanashree S et al., Molecularly Imprinted Polymers: Novel Discovery for Drug Delivery.
Current Drug Delivery, 13, (5), 632-645, (2016)
   

imprinted sol-gel

Güney S et al., Development of an Electrochemical Sensor Based on Covalent Molecular Imprinting for Selective Determination of Bisphenol-A.
Electroanalysis, 29, (11), 2579-2590, (2017)
   

Imprinted sol-gel electrochemical sensor

Xu GL et al., Imprinted propyl gallate electrochemical sensor based on graphene/single walled carbon nanotubes/sol-gel film.
Food Chemistry, 177, 37-42, (2015)
   

Imprinted sol-gel polymers

Rezaei B et al., Modified Au nanoparticles-imprinted sol-gel, multiwall carbon nanotubes pencil graphite electrode used as a sensor for ranitidine determination.
Materials Science and Engineering: C, 37, 113-119, (2014)
   

Imprinted sol-gel polymers

Rezaei B et al., Modified Au Nanoparticles/Imprinted Sol-Gel/Multiwall Carbon Nanotubes Pencil Graphite Electrode as a Selective Electrochemical Sensor for Papaverine Determination.
IEEE Sensors Journal, 16, (19), 7037-7044, (2016)
   

Imprinted sol-gel polymers

Rouhani M et al., Molecularly imprinted sol-gel electrochemical sensor for sildenafil based on a pencil graphite electrode modified by Preyssler heteropolyacid/gold nanoparticles/MWCNT nanocomposite.
Microchimica Acta, 187, (9), Article512-(2020)
   

Imprinted sol-gels

Guardia L et al., Role of surface adsorption and porosity features in the molecular recognition ability of imprinted sol-gels.
Biosensors and Bioelectronics, 23, (7), 1101-1108, (2008)
   

Imprinted sol-gel sensor

Zhang ZH et al., Novel layer-by-layer assembly molecularly imprinted sol-gel sensor for selective recognition of clindamycin based on Au electrode decorated by multi-wall carbon nanotube.
Journal of Colloid and Interface Science, 344, (1), 158-164, (2010)
   

Imprinted solid-phase extraction

Koohpaei AR et al., Molecular Imprinted Solid Phase Extraction for Determination of Atrazine in Environmental Samples.
Iranian Journal of Environmental Health Science & Engineering, 5, (4), 283-296, (2008)
   

Imprinted sorbent

Xie FZ et al., Preparation of Pb2+ Double-template Imprinted Sorbent for Selective Separation of Pb2+ from Environmental Water and Sediment Samples.
Chinese Journal of Analytical Chemistry, 39, (1), 77-81, (2011)
   

Imprinted sorbent

Xie FZ et al., Selective adsorption and separation of trace dissolved Fe(III) from natural water samples by double template imprinted sorbent with chelating diamines.
Chemical Engineering Journal, 183, (1), 372-380, (2012)
   

imprinted SPMS

Shah SM et al., Highly Selective Solid-Phase Extraction of Pb(II) by Ion-Imprinted Superparamagnetic Mesoporous Silica.
ChemistrySelect, 4, (1), 259-264, (2019)
   

Imprinted structures

Sajini T et al., A brief overview of molecularly imprinted polymers supported on titanium dioxide matrices.
Materials Today Chemistry, 11, 283-295, (2019)
   

Imprinted submicrosphere

Feng QZ et al., Synthesis and binding site characteristics of 2,4,6-trichlorophenol-imprinted polymers.
Analytical and Bioanalytical Chemistry, 392, (7-8), 1419-1429, (2008)
   

Imprinted sub-microspheres

Wei ST et al., Binding site characteristics of 17β-estradiol imprinted polymers.
Biosensors and Bioelectronics, 23, (2), 201-209, (2007)
   

imprinted systems

Book chapter, Alvarez-Lorenzo Cet al., Nanostructures and Nanostructured Networks for Smart Drug Delivery, 
In: Biomimetic Approaches for Biomaterials Development, Mano JF (Ed.) 
Wiley-VCH Verlag GmbH & Co. KGaA: 417-458, (2012)    

imprinted template

Tao YQ et al., Solubilization characteristics of licorice based on supramolecular "imprinted template" theory.
China Journal of Chinese Materia Medica, 41, (10), 1849-1854, (2016)
   

imprinted thin film

Liu ZH et al., Molecularly imprinted TiO2 thin film using stable ground-state complex as template as applied to selective electrochemical determination of mercury.
Talanta, 68, (4), 1120-1125, (2006)
   

Imprinted thin films

Hu YF et al., Sensitive and selective imprinted electrochemical sensor for p-nitrophenol based on ZnO nanoparticles/carbon nanotubes doped chitosan film.
Thin Solid Films, 520, (16), 5314-5321, (2012)
   

imprinted TiO2 photocatalyst

Zhou WC et al., Preparation and Performance of a Novel Magnetic Imprinted TiO2 Photocatalyst.
Nanoscience and Nanotechnology Letters, 7, (8), 678-684, (2015)
   

imprinted zeolite

Athiroh A et al., Carbon Paste Electrode Modified Imprinted Zeolite as a Selective Sensor for Creatine Analysis by Potentiometry.
IOP Conference Series: Earth and Environmental Science, 217, Article012003-(2019)
   

imprinting

Rackow B et al., Imprinting of molecular information on resin surfaces and testing of a multidentate imprint with monodentate "guest." XXII.
Zeitschrift für Chemie, 7, (11), 444-445, (1967)
   

imprinting

Rackow B, Imprinting of molecular information on surfaces of organic high polymers.
Zeitschrift für Chemie, 7, (10), 398-399, (1967)
   

imprinting

Rackow B, Application of the "fundamental equation of information chemistry" for a resin imprinted with copper-phthalocyaninetetrasulfonic acid and graphic determination of its information via sulfonic acid and methyl orange. XXIV.
Zeitschrift für Chemie, 8, (1), 33-33, (1968)
   

imprinting

Proceeding, Rackow B et al, In vitro experiments to impinge molecular folding information on organic polymers., 
Drischel H (Ed.), 
246-249, (1968)
   

imprinting

Andersson L et al., Imprinting of amino-acid derivatives in macroporous polymers.
Tetrahedron Letters, 25, (45), 5211-5214, (1984)
   

imprinting

Norrlöw O et al., Acrylic polymer preparations containing recognition sites obtained by imprinting with substrates.
Journal of Chromatography, 299, (1), 29-41, (1984)
   

imprinting

Wulff G, Molecular imprinting.
Annals of the New York Academy of Sciences, 434, 327-333, (1984)
   

imprinting

Glad M et al., Use of silane monomers for molecular imprinting and enzyme entrapment in polysiloxane-coated porous silica.
Journal of Chromatography, 347, (1), 11-23, (1985)
   

imprinting

Sellergren B et al., Molecular imprinting of amino-acid derivatives in macroporous polymers - demonstration of substrate-selectivity and enantio-selectivity by chromatographic resolution of racemic mixtures of amino-acid derivatives.
Journal of Chromatography, 347, (1), 1-10, (1985)
   

imprinting

Wulff G et al., Enzyme-analogue built polymers .18. Chiral cavities in polymer layers coated on wide-pore silica.
Reactive Polymers, Ion Exchangers, Sorbents, 3, (4), 261-275, (1985)
   

imprinting

Månsson MO et al., Improved chromatography - prearranged distances between boronate groups by the molecular imprinting approach.
Biological Chemistry Hoppe-Seyler, 368, (7), 761-761, (1987)
   

imprinting

Norrlöw O et al., Improved chromatography - prearranged distances between boronate groups by the molecular imprinting approach.
Journal of Chromatography, 396, (1), 374-377, (1987)
   

imprinting

Andersson L, Preparation of amino-acid ester-selective cavities formed by non-covalent imprinting with a substrate in highly cross-linked polymers.
Reactive Polymers, Ion Exchangers, Sorbents, 9, (1), 29-41, (1988)
   

imprinting

Sellergren B et al., Enantio-selective and substrate-selective macroporous polymers by molecular imprinting.
Reactive Polymers, Ion Exchangers, Sorbents, 9, (1), 125-125, (1988)
   

imprinting

Andersson LI et al., Molecular imprinting of the coenzyme-substrate analog N-pyridoxyl-L-phenylalaninanilide.
Makromolekulare Chemie-Rapid Communications, 10, (9), 491-495, (1989)
   

imprinting

Ekberg B et al., Molecular imprinting - a technique for producing specific separation materials.
Trends In Biotechnology, 7, (4), 92-96, (1989)
   

imprinting

Moradian A et al., Preparation of a functional, highly selective polymer by molecular imprinting. A demonstration with L-p-aminophenylalanine anilide as a template molecule allowing multiple points of attachment.
Journal of Molecular Recognition, 2, (4), 167-169, (1989)
   

imprinting

O’Shannessy DJ et al., Molecular imprinting of amino-acid derivatives at low-temperature (0°C) Using photolytic homolysis of azobisnitriles.
Analytical Biochemistry, 177, (1), 144-149, (1989)
   

imprinting

Robinson DK et al., Molecular imprinting of a transition-state analog leads to a polymer exhibiting esterolytic activity.
Journal of the Chemical Society-Chemical Communications, (14), 969-970, (1989)
   

imprinting

Sellergren B, Molecular imprinting by noncovalent interactions - enantioselectivity and binding-capacity of polymers prepared under conditions favoring the formation of template complexes.
Makromolekulare Chemie-Macromolecular Chemistry And Physics, 190, (11), 2703-2711, (1989)
   

imprinting

Sellergren B et al., Molecular imprinting by multiple noncovalent host-guest interactions: synthetic polymers with induced specificity.
Methods in Molecular and Cellular Biology, 59-62, (1989)
   

imprinting

Sellergren B, Molecular imprinting by noncovalent interactions - tailor-made chiral stationary phases of high selectivity and sample load-capacity.
Chirality, 1, (1), 63-68, (1989)
   

imprinting

Wulff G et al., Enzyme-analogue built polymers .26. Enantioselective synthesis of amino-acids using polymers possessing chiral cavities obtained by an imprinting procedure with template molecules.
Makromolekulare Chemie-Macromolecular Chemistry And Physics, 190, (7), 1727-1735, (1989)
   

imprinting

Andersson LI et al., Molecular recognition in synthetic-polymers - preparation of chiral stationary phases by molecular imprinting of amino-acid amides.
Journal of Chromatography A, 513, (1), 167-179, (1990)
   

imprinting

Braco L et al., Production of abiotic receptors by molecular imprinting of proteins.
Proceedings of the National Academy of Sciences of the United States of America, 87, (1), 274-277, (1990)
   

imprinting

Dabulis K et al., Design of novel receptors by molecular imprinting of proteins.
Abstracts of Papers of the American Chemical Society, 200, (BIOT), 28-28, (1990)
   

imprinting

Book chapter, Sellergren B, Molecular Imprinting by non-covalent interactions, 
In: Innovations and Perspectives in Solid Phase Synthesis. Peptides, Polypeptides and Oligonucleotides, Epton R (Ed.) 
SPCC (UK): Birmingham, 293-307, (1990)    

imprinting

Sellergren B et al., Molecular recognition in macroporous polymers prepared by a substrate-analog imprinting strategy.
Journal of Organic Chemistry, 55, (10), 3381-3383, (1990)
   

imprinting

Green M, Racemic resolution of free sugars with macroporous polymers prepared by molecular imprinting: selectivity dependence on the arrangements of functional groups versus spatial requirements.
Chemtracts: Macromol. Chem., 2, (5), 338-370, (1991)
   

imprinting

Rosatzin T et al., Preparation of Ca2+ selective sorbents by molecular imprinting using polymerizable ionophores.
Journal of the Chemical Society-Perkin Transactions 2, (8), 1261-1265, (1991)
   

imprinting

Book chapter, Wulff G, Polymer assisted molecular recognition: The current understanding of the molecular imprinting procedure, 
In: Bioorganic Chemistry in Healthcare and Technology, Pandit UK, Alderweireldt FC (Eds.) 
Plenum Press: New York, 55-68, (1991)    

imprinting

Wulff G et al., Enzyme-analog-built polymers .27. Racemic-resolution of free sugars with macroporous polymers prepared by molecular imprinting - selectivity dependence on the arrangement of functional-groups versus requirements.
Journal of Organic Chemistry, 56, (1), 395-400, (1991)
   

imprinting

Dabulis K et al., Molecular imprinting of proteins and other macromolecules resulting in new adsorbents.
Biotechnology and Bioengineering, 39, (2), 176-185, (1992)
   

imprinting

Gupta MN, Enzyme function in organic solvents.
European Journal of Biochemistry, 203, (1-2), 25-32, (1992)
   

imprinting

Kaiser GG et al., Sorbents for liquid-chromatography based on the footprint principle - an exploratory-study.
Fresenius Journal of Analytical Chemistry, 342, (10), 834-838, (1992)
   

imprinting

Morihara K et al., Enzyme-like enantioselective catalysis over chiral molecular footprint cavities on a silica (alumina) gel surface.
Journal of the Chemical Society-Chemical Communications, (4), 358-360, (1992)
   

imprinting

Piletskii SA et al., Construction of molecular sensors based on substrate-selective polymeric membranes.
Journal of Analytical Chemistry, 47, (9), 1231-1234, (1992)
   

imprinting

Tahmassebi DC et al., Molecular imprinting - synthesis of 3-helix bundle proteins on modified silica-gel.
Abstracts of Papers of the American Chemical Society, 204, (ORGN), 314-314, (1992)
   

imprinting

Dandekar T et al., Drug assay using antibody mimics made by molecular imprinting.
Chemtracts: Biochemistry and Molecular Biology, 4, (2), 75-76, (1993)
   

imprinting

Dunkin IR et al., Molecular imprinting of flat polycondensed aromatic-molecules in macroporous polymers.
Polymer, 34, (1), 77-84, (1993)
   

imprinting

Ramström O et al., Recognition sites incorporating both pyridinyl and carboxy functionalities prepared by molecular imprinting.
Journal of Organic Chemistry, 58, (26), 7562-7564, (1993)
   

imprinting

Wulff G, The role of binding-site interactions in the molecular imprinting of polymers.
Trends In Biotechnology, 11, (3), 85-87, (1993)
   

imprinting

Book chapter, Andersson LIet al., Molecular imprinting - A versatile technique for the preparation of separation materials of predetermined selectivity, 
In: Highly selective separations in biotechnology, Street G (Ed.) 
Blackie: London, 207-225, (1994)    

imprinting

Holmes AB et al., Molecular imprinting.
Chemistry and Industry, 18, (april), 304-304, (1994)
   

imprinting

Kempe M et al., Chiral recognition of N-a-protected amino-acids and derivatives in noncovalently molecularly imprinted polymers.
International Journal of Peptide and Protein Research, 44, 603-606, (1994)
   

imprinting

Kempe M et al., Direct resolution of naproxen on a noncovalently molecularly imprinted chiral stationary-phase.
Journal of Chromatography A, 664, (2), 276-279, (1994)
   

imprinting

Mayes AG et al., Sugar binding polymers showing high anomeric and epimeric discrimination obtained by noncovalent molecular imprinting.
Analytical Biochemistry, 222, (2), 483-488, (1994)
   

imprinting

Mosbach K, The technique of molecular imprinting in the formation of antibody mimics, and their applications to the analysis of pesticides.
Abstracts of Papers of the American Chemical Society, 207, (AGRO), 149-149, (1994)
   

imprinting

Ohkubo K et al., Homogeneous and heterogeneous esterolytic catalyzes of imidazole-containing polymers prepared by molecular imprinting of a transition-state analog.
Journal of Molecular Catalysis, 87, (1), L21-L24, (1994)
   

imprinting

Piletsky SA et al., Sensors for low-weight organic-molecules based on molecular imprinting technique.
Sensors and Actuators B: Chemical, 19, (1-3), 629-631, (1994)
   

imprinting

Sellergren B, Imprinted dispersion polymers - a new class of easily accessible affinity stationary phases.
Journal of Chromatography A, 673, (1), 133-141, (1994)
   

imprinting

Shea KJ, Molecular imprinting of synthetic network polymers - the de-novo synthesis of macromolecular binding and catalytic sites.
Abstracts of Papers of the American Chemical Society, 208, (OLY), 467-467, (1994)
   

imprinting

Shimada T et al., Footprint catalysis .10. Surface modification of molecular footprint catalysts and its effects on their molecular recognition and catalysis.
Bulletin of the Chemical Society of Japan, 67, (1), 227-235, (1994)
   

imprinting

Tahmassebi D et al., Molecular imprinting: Synthesis of 3-helix bundle proteins on modified silica gel.
Synth. Meth., 196-198, (1994)
   

imprinting

Tahmassebi DC et al., Synthesis of a new trialdehyde template for molecular imprinting.
Journal of Organic Chemistry, 59, (3), 679-681, (1994)
   

imprinting

Cullen L et al., Molecular imprinting of poly(tris(5-amino,10-phenanthroline) metal-complexes.
Abstracts of Papers of the American Chemical Society, 210, (ANYL), 61-61, (1995)
   

imprinting

Gamez P et al., Molecular imprinting effect in the synthesis of immobilized rhodium complex catalyst (IRC cat).
Tetrahedron Letters, 36, (48), 8779-8782, (1995)
   

imprinting

Glad M et al., Molecularly imprinted composite polymers based on trimethylolpropane trimethacrylate (TRIM) Particles for efficient enantiomeric separations.
Reactive Polymers, 25, (1), 47-54, (1995)
   

imprinting

Kempe M et al., Separation of amino-acids, peptides and proteins on molecularly imprinted stationary phases.
Journal of Chromatography A, 691, (1-2), 317-323, (1995)
   

imprinting

Kobayashi T et al., Molecular imprinting of theophylline in acrylonitrile-acrylic acid copolymer membrane.
Chemistry Letters, 24, (10), 927-928, (1995)
   

imprinting

Matsui J et al., A molecularly imprinted synthetic polymer receptor selective for atrazine.
Analytical Chemistry, 67, (23), 4404-4408, (1995)
   

imprinting

Nicholls IA et al., Insights into the role of the hydrogen-bond and hydrophobic effect on recognition in molecularly imprinted polymer synthetic peptide receptor mimics.
Journal of Chromatography A, 691, (1-2), 349-353, (1995)
   

imprinting

Nilsson KGI et al., Molecular imprinting of acetylated carbohydrate-derivatives into methacrylic polymers.
Journal of Chromatography A, 707, (2), 199-203, (1995)
   

imprinting

Okahata Y et al., Enhancing enantioselectivity of a lipid-coated lipase via imprinting methods for esterification in organic-solvents.
Tetrahedron: Asymmetry, 6, 1311-1322, (1995)
   

imprinting

Pande VS et al., Phase-diagram of an imprinted copolymer in a random external-field.
Journal of Physics A-Mathematical and General, 28, (13), 3657-3666, (1995)
   

imprinting

Piletsky SA et al., Atrazine sensing by molecularly imprinted membranes.
Biosensors and Bioelectronics, 10, (9-10), 959-964, (1995)
   

imprinting

Shea KJ, Molecular imprinting - the de-novo synthesis of macromolecular binding and catalytic sites.
Abstracts of Papers of the American Chemical Society, 209, (COLL), 29-29, (1995)
   

imprinting

Steinke J et al., Imprinting of synthetic polymers using molecular templates.
Advances in Polymer Science, 123, 81-125, (1995)
   

imprinting

Tanabe K et al., Recognition of barbiturates in molecularly imprinted copolymers using multiple hydrogen-bonding.
Journal of the Chemical Society-Chemical Communications, (22), 2303-2304, (1995)
   

imprinting

Wulff G, Molecular imprinting in cross-linked materials with the aid of molecular templates - a way towards artificial antibodies.
Angewandte Chemie International Edition, 34, (17), 1812-1832, (1995)
   

imprinting

Ahmad WR et al., Transesterification on ’’imprinted’’ silica.
Catalysis Letters, 40, 109-114, (1996)
   

imprinting

Book chapter, Andersson LIet al., Molecular Imprinting: The current status and future development of polymer-based recognition systems, 
In: Biochemical Technology, Part B, Bittar EE, Danielsson B, Bulow L (Eds.) 
Elsevier: Amsterdam, 651-670, (1996)    

imprinting

Andersson LI et al., Molecular imprinting of the endogenous neuropeptide Leu(5)-enkephalin and some derivatives thereof.
Macromolecular Rapid Communications, 17, (1), 65-71, (1996)
   

imprinting

Ansell RJ et al., Molecularly imprinted polymers for bioanalysis: Chromatography, binding assays and biomimetic sensors.
Current Opinion in Biotechnology, 7, (1), 89-94, (1996)
   

imprinting

Burow M et al., Molecular imprinting: Synthesis of polymer particles with antibody-like binding characteristics for glucose oxidase.
Biochemical and Biophysical Research Communications, 227, (2), 419-422, (1996)
   

imprinting

Dauwe C et al., Influence of template basicity and hydrophobicity on the molecular recognition properties of molecularly imprinted polymers.
Journal of Chromatography A, 753, (2), 191-200, (1996)
   

imprinting

Davis ME et al., Rational catalyst design via imprinted nanostructured materials.
Chemistry of Materials, 8, (8), 1820-1839, (1996)
   

imprinting

Kempe M, Antibody-mimicking polymers as chiral stationary phases in HPLC.
Analytical Chemistry, 68, (11), 1948-1953, (1996)
   

imprinting

Mishra P et al., Structural basis for the molecular memory of imprinted proteins in anhydrous media.
Biotechnology and Bioengineering, 52, (5), 609-614, (1996)
   

imprinting

Morita M et al., Selective electrochemical detection of catechol and catecholamines on modified electrodes with molecular template.
Denki Kagaku, 64, 1239-1243, (1996)
   

imprinting

Nicholls IA et al., Some recent developments in the preparation of novel recognition systems: A recognition site for the selective catalysis of an aldol condensation using molecular imprinting and specific affinity motifs for a-chymotrypsin using a phage display peptide library.
Journal of Molecular Recognition, 9, (5-6), 652-657, (1996)
   

imprinting

Ohya Y et al., Recruitment of enzyme activity in albumin by molecular imprinting.
Macromolecular Rapid Communications, 17, (12), 871-874, (1996)
   

imprinting

Ramström O et al., Artificial antibodies to corticosteroids prepared by molecular imprinting.
Chemistry & Biology, 3, (6), 471-477, (1996)
   

imprinting

Ramström O et al., Chiral recognition in adrenergic receptor binding mimics prepared by molecular imprinting.
Journal of Molecular Recognition, 9, (5-6), 691-696, (1996)
   

imprinting

Siemann M et al., Selective recognition of the herbicide atrazine by noncovalent molecularly imprinted polymers.
Journal of Agricultural and Food Chemistry, 44, (1), 141-145, (1996)
   

imprinting

Zhu XX et al., Polymer resins with controlled pore sizes created by reverse micellar imprinting.
Abstracts of Papers of the American Chemical Society, 211, (MSE), 248-248, (1996)
   

imprinting

Anon, Molecular imprinting and more.
Trends In Food Science & Technology, 8, (5), IV-IV, (1997)
   

imprinting

Akashi M et al., Imprinting of nucleosides and nucleotides in polyacrylamide gel.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 131-131, (1997)
   

imprinting

Andersson HS et al., Spectroscopic evaluation of molecular imprinting polymerization systems.
Bioorganic Chemistry, 25, (3), 203-211, (1997)
   

imprinting

Andersson HS et al., Molecular imprinting: Recent innovations in synthetic polymer receptor and enzyme mimics.
Recent Research Developments in Pure & Applied Chemistry, 1, 133-157, (1997)
   

imprinting

Andersson LI et al., A highly selective solid phase extraction sorbent for pre-concentration of sameridine made by molecular imprinting.
Chromatographia, 46, (1-2), 57-62, (1997)
   

imprinting

Arnold FH, Imprinting with metal complexes: Selective adsorbents and sensors for aqueous media.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 128-128, (1997)
   

imprinting

Baggiani C et al., Chromatographic characterization of a molecularly imprinted polymer binding theophylline in aqueous buffers.
Journal of Chromatography A, 786, (1), 23-29, (1997)
   

imprinting

Chen H et al., Metal-ion-templated polymers: Synthesis and structure of N-(4- vinylbenzyl)-1,4,7-triazacyclononanezinc(II) complexes, their copolymerization with divinylbenzene, and metal-ion selectivity studies of the demetalated resins - Evidence for a sandwich complex in the polymer matrix.
Angewandte Chemie International Edition, 36, (6), 642-645, (1997)
   

imprinting

Cheong SH et al., Development of steroid sensors using molecularly imprinted polymers.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 31-31, (1997)
   

imprinting

Dai S et al., Enhancement of uranyl adsorption capacity and selectivity on silica sol-gel glasses via molecular imprinting.
Chemistry of Materials, 9, (11), 2521-2525, (1997)
   

imprinting

Dai S et al., Spectroscopic probing of adsorption of uranyl to uranyl-imprinted silica sol-gel glass via steady-state and time-resolved fluorescence measurement.
Journal of Physical Chemistry B, 101, (28), 5521-5524, (1997)
   

imprinting

Book chapter, Dickert FLet al., SAW and QMB for chemical sensing, 
In: Proceedings of the 1997 IEEE International Frequency Control Symposium, 
IEEE: New York, 120-123, (1997)    

imprinting

González-Navarro H et al., Improving lipase activity in solvent-free media by interfacial activation-based molecular bioimprinting.
Journal of Molecular Catalysis B: Enzymatic, 3, (1-4), 111-119, (1997)
   

imprinting

Haupt K et al., Binding assays for drugs and herbicides using molecularly imprinted polymer particles as recognition elements in different assay formats.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 32-32, (1997)
   

imprinting

Book chapter, Hernandez Eet al., Biologically inspired recognition chemistry for biosensors. Design of recognition for ion-selective electrodes (ISEs), 
In: Biosensors for Direct Monitoring of Environmental Pollutants in Field, Nikolelis DP, Krull UJ, Wang J, Mascini M (Eds.) 
Kluwer Academic Publishers: Dordrecht, 97-106, (1997)    

imprinting

Hosoya K et al., Study on molecular recognition by molecular imprinting.
Kuromatogurafi, 18, (2), 104-105, (1997)
   

imprinting

Karmalkar RN et al., Pendent chain linked delivery systems .2. Facile hydrolysis through molecular imprinting effects.
Journal of Controlled Release, 43, (2-3), 235-243, (1997)
   

imprinting

Kobayashi T et al., Molecularly imprinted membranes by a phase inversion method.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 155-155, (1997)
   

imprinting

Lin JM et al., Temperature effect on chiral recognition of some amino acids with molecularly imprinted polymer filled capillary electrochromatography.
Biomedical Chromatography, 11, (5), 298-302, (1997)
   

imprinting

Lion-Dagan M et al., Nitrospiropyran-modified a-chymotrypsin, a photostimulated biocatalyst in an organic solvent: effects of bioimprinting.
Journal of Photochemistry and Photobiology A-Chemistry, 108, (2-3), 247-252, (1997)
   

imprinting

Liu XC et al., Studies towards a tailor-made catalyst for the Diels-Alder reaction using the technique of molecular imprinting.
Macromolecular Rapid Communications, 18, (7), 609-615, (1997)
   

imprinting

Book chapter, Locatelli Fet al., Molecular imprinting polymerised catalytic complexes in asymmetric catalysis, 
In: Heterogeneous Catalysis and Fine Chemicals IV, Blaser HU, Baiker A, Prins R (Eds.) 
Elsevier: Amsterdam, 517-522, (1997)    

imprinting

Matsui J et al., An in-situ approach to molecularly imprinted "tailor-made" separation media.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 157-157, (1997)
   

imprinting

Matsui J et al., 2-(trifluoromethyl)acrylic acid: A novel functional monomer in non-covalent molecular imprinting.
Analytica Chimica Acta, 343, (1-2), 1-4, (1997)
   

imprinting

Matsui J et al., A molecularly imprinted polymer rod as nicotine selective affinity media prepared with 2-(trifluoromethyl)acrylic acid.
Analytical Communications, 34, (7), 199-200, (1997)
   

imprinting

Mayes AG et al., Molecularly imprinted polymers: useful materials for analytical chemistry?
TrAC Trends in Analytical Chemistry, 16, (6), 321-332, (1997)
   

imprinting

Meng ZH et al., Molecular imprinting of (R)-(+)-a-methylbenzylamine for chiral stationary phase.
Chinese Chemical Letters, 8, 345-346, (1997)
   

imprinting

Miyajima T et al., A physiochemical study on the origin of the imprinting effect.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 148-148, (1997)
   

imprinting

Mosbach K, The emerging technique of molecular imprinting and its future impact on biotechnology.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 111-111, (1997)
   

imprinting

Pande VS et al., How to create polymers with protein-like capabilities: A theoretical suggestion.
Physica D, 107, (2-4), 316-321, (1997)
   

imprinting

Pinel C et al., Preparation and utilization of molecularly imprinted silicas.
Advanced Materials, 9, (7), 582-585, (1997)
   

imprinting

Ramström O et al., Molecularly imprinted materials - Their use in separations, immunoassay-type analyses and syntheses.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 129-129, (1997)
   

imprinting

Rush DJ et al., Molecular imprinting: Recent advances in the synthesis of macromolecular binding sites.
Abstracts of Papers of the American Chemical Society, 214, (ORGN), 146-146, (1997)
   

imprinting

Schweitz L et al., Capillary electrochromatography with molecular imprint-based selectivity for enantiomer separation of local anaesthetics.
Journal of Chromatography A, 792, (1-2), 401-409, (1997)
   

imprinting

Sellergren B, Imprinted polymers: Stable, reusable antibody-mimics for highly selective separations.
American Laboratory, 29, 14-14, (1997)
   

imprinting

Sellergren B, Important considerations in the ’’design’’ of receptor sites using noncovalent imprinting.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 97-97, (1997)
   

imprinting

Sellergren B, Noncovalent molecular imprinting: Antibody-like molecular recognition in polymeric network materials.
TrAC Trends in Analytical Chemistry, 16, (6), 310-320, (1997)
   

imprinting

Shea KJ, Molecular imprinting. The de novo synthesis of macromolecular binding and catalytic sites.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 145-145, (1997)
   

imprinting

Shin Y et al., Enhancement of uranyl adsorption capacity on silica sol-gel glasses via molecular imprinting.
Abstracts of Papers of the American Chemical Society, 214, (INOR), 251-251, (1997)
   

imprinting

Sreenivasan K, Imparting cholesterol recognition sites in radiation polymerised poly(2-hydroxyethyl methacrylate) by molecular imprinting.
Polymer International, 42, (2), 169-172, (1997)
   

imprinting

Sreenivasan K et al., Interaction of molecularly imprinted polymers with creatinine.
Journal of Applied Polymer Science, 66, (13), 2539-2542, (1997)
   

imprinting

Stewart NAS et al., Imprinting of lyophilized a-chymotrypsin affects the reactivity of the active-site imidazole.
Biochemical and Biophysical Research Communications, 240, (1), 27-31, (1997)
   

imprinting

Takeuchi T et al., TFMAA: A novel functional monomer for non-covalent molecular imprinting.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 112-112, (1997)
   

imprinting

Uezu K et al., Metal ion-imprinted polymers prepared by surface template polymerization with W/O emulsions.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 101-101, (1997)
   

imprinting

Umeno D et al., Imprinting of proteins on polymer-modified DNA for affinity separations.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 130-130, (1997)
   

imprinting

Wang HY et al., Molecular imprint membranes prepared by the phase inversion precipitation technique .2. Influence of coagulation temperature in the phase inversion process on the encoding in polymeric membranes.
Langmuir, 13, (20), 5396-5400, (1997)
   

imprinting

Book chapter, Wulff G, Imprinting techniques in synthetic polymers - New options for chemosensors, 
In: Frontiers in Biosensorics I.Fundamental Aspects, Scheller FW, Schubert F, Fedrowitz J (Eds.) 
Birkhäuser Verlag: Basel, Switzerland, 13-26, (1997)    

imprinting

Wulff G, Molecular imprinting in polymers - New opportunities in separation and catalysis.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 96-96, (1997)
   

imprinting

Wulff G et al., Enzyme models based on molecularly imprinted polymers with strong esterase activity.
Angewandte Chemie International Edition, 36, (18), 1962-1964, (1997)
   

imprinting

Yano K et al., Stereoselective recognition of dipeptide derivatives in molecularly imprinted polymers which incorporate an L-valine derivative as a novel functional monomer.
Analytica Chimica Acta, 357, (1-2), 91-98, (1997)
   

imprinting

Yano K et al., Development of artificial host polymers which mimick biochemical interactions.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 114-114, (1997)
   

imprinting

Yokobayashi Y et al., Enhancing the selectivity of molecularly imprinted polymers.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 26-26, (1997)
   

imprinting

Yoshikawa M, Molecularly imprinted polymeric membranes for optical resolution.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 154-154, (1997)
   

imprinting

Yu C et al., Molecular imprinting utilizing an amide functional group for hydrogen bonding leading to highly efficient polymers.
Journal of Organic Chemistry, 62, (12), 4057-4064, (1997)
   

imprinting

Book chapter, Zhu XXet al., New polymer resins with specific pore sizes created by reverse micellar imprinting, 
In: International conference on biorelated polymers, controlled release and reactive polymers, 
23-24, (1997)    

imprinting

Amundson KR, Imprinting of nematic order at surfaces created by polymerization-induced phase separation.
Physical Review E, 58, (3), 3273-3279, (1998)
   

imprinting

Andersson HS et al., Crown ethers as a tool for the preparation of molecularly imprinted polymers.
Journal of Molecular Recognition, 11, (1-6), 103-106, (1998)
   

imprinting

Book chapter, Andersson LI, Molecular imprinting as an aid to drug bioanalysis, 
In: Drug-development assay approaches including molecular imprinting and biomarkers, Reid E, Hill HM, Wilson ID (Eds.) 
Royal Society of Chemistry: 2-12, (1998)    

imprinting

Asanuma H et al., Synthesis of molecularly imprinted polymer of b-cyclodextrin for the efficient recognition of cholesterol.
Supramolecular Science, 5, (3-4), 417-421, (1998)
   

imprinting

Berglund J et al., Selection of phage display combinatorial library peptides with affinity for a yohimbine imprinted methacrylate polymer.
Analytical Communications, 35, (1), 3-7, (1998)
   

imprinting

Book chapter, Bowman MAEet al., A high-throughput screening technique employing molecularly imprinted polymers as biomimetic selectors, 
In: Drug-development assay approaches including molecular imprinting and biomarkers, Reid E, Hill HM, Wilson ID (Eds.) 
Royal Society of Chemistry: 37-43, (1998)    

imprinting

Burleigh M et al., Removal of Cu2+ from aqueous solutions via sol-gel extraction. A molecular imprinting approach.
Abstracts of Papers of the American Chemical Society, 216, (INOR), 196-196, (1998)
   

imprinting

Cheong SH et al., Synthesis and binding properties of a noncovalent molecularly imprinted testosterone-specific polymer.
Journal of Polymer Science Part A: Polymer Chemistry, 36, (11), 1725-1732, (1998)
   

imprinting

Dickert FL et al., Molecular imprinting in chemical sensing - Detection of aromatic and halogenated hydrocarbons as well as polar solvent vapors.
Fresenius Journal of Analytical Chemistry, 360, (7/8), 759-762, (1998)
   

imprinting

Dickert FL et al., Molecular imprinting through van der Waals interactions: Fluorescence detection of PAHs in water.
Advanced Materials, 10, (2), 149-151, (1998)
   

imprinting

Garcia R et al., Ionic imprinting effect in gadolinium/lanthanum separation.
Tetrahedron Letters, 39, (47), 8651-8654, (1998)
   

imprinting

Hasson CD et al., Imprinting chiral structures on liquid crystalline elastomers.
Chemical Communications, (22), 2515-2516, (1998)
   

imprinting

Haupt K et al., Assay system for the herbicide 2,4-dichlorophenoxyacetic acid using a molecularly imprinted polymer as an artificial recognition element.
Analytical Chemistry, 70, (3), 628-631, (1998)
   

imprinting

Haupt K et al., Plastic antibodies: developments and applications.
Trends In Biotechnology, 16, (11), 468-475, (1998)
   

imprinting

Heegaard NHH et al., Affinity capillary electrophoresis: important application areas and some recent developments.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 715, (1), 29-54, (1998)
   

imprinting

Hosoya K et al., Molecular recognition towards coplanar polychlorinated biphenyls based on the porogen imprinting effects of xylenes.
Journal of Chromatography A, 828, (1-2), 91-94, (1998)
   

imprinting

Hwang KO et al., Imprinting for the assembly of artificial receptors on a silica surface.
Journal of Materials Chemistry, 8, (9), 2153-2156, (1998)
   

imprinting

Inoue K et al., Chiroselective re-binding of saccharides to the fibrous aggregates prepared from organic gels of cholesterylphenylboronic acid.
Tetrahedron Letters, 39, (19), 2981-2984, (1998)
   

imprinting

Ishii T et al., Regioselective introduction of two boronic acid groups into [60]fullerene using saccharides as imprinting templates.
Chemical Communications, 1047-1048, (1998)
   

imprinting

Kamiya N et al., Preparation of surfactant-coated lipases utilizing the molecular imprinting technique.
Journal of Fermentation and Bioengineering, 85, (2), 237-239, (1998)
   

imprinting

Kanekiyo Y et al., Facile construction of a novel metal-imprinted polymer surface without a polymerisation process.
Journal of the Chemical Society-Perkin Transactions 2, (9), 2005-2008, (1998)
   

imprinting

Knutsson M et al., Novel chiral recognition elements for molecularly imprinted polymer preparation.
Journal of Molecular Recognition, 11, (1-6), 87-90, (1998)
   

imprinting

Lee SW et al., Molecular imprinting of azobenzene carboxylic acid on a TiO2 ultrathin film by the surface sol-gel process.
Langmuir, 14, (10), 2857-2863, (1998)
   

imprinting

Liao Y et al., Enantioselective polymeric transporters of D-tryptophan prepared using molecular imprinting techniques.
Abstracts of Papers of the American Chemical Society, 216, (ORGN), 435-435, (1998)
   

imprinting

Liao Y et al., Enantioselective polymeric transporters for tryptophan, phenylalanine, and histidine prepared using molecular imprinting techniques.
Bioorganic Chemistry, 26, (6), 309-322, (1998)
   

imprinting

Lin JM et al., Enantiomeric resolution of dansyl amino acids by capillary electrochromatography based on molecular imprinting method.
Chromatographia, 47, (11-12), 625-629, (1998)
   

imprinting

Locatelli F et al., Molecular imprinting of polymerised catalytic complexes in asymmetric catalysis.
Journal of Molecular Catalysis A: Chemical, 135, (1), 89-98, (1998)
   

imprinting

Markowitz MA et al., Functionalized silica gel particles for molecular imprinting.
Abstracts of Papers of the American Chemical Society, 215, (COLL), 179-179, (1998)
   

imprinting

Book chapter, Martin Pet al., Selective SPE’s using molecular imprinted polymers, 
In: Drug-development assay approaches including molecular imprinting and biomarkers, Reid E, Hill HM, Wilson ID (Eds.) 
Royal Society of Chemistry: 21-27, (1998)    

imprinting

Matsui J et al., Molecularly imprinted receptor having metalloporphyrin-based signaling binding site.
Analytical Communications, 35, (7), 225-227, (1998)
   

imprinting

Book chapter, Mayes AGet al., Optimization of molecularly imprinted polymers for radio-ligand binding assays, 
In: Drug-development assay approaches including molecular imprinting and biomarkers, Reid E, Hill HM, Wilson ID (Eds.) 
Royal Society of Chemistry: 28-36, (1998)    

imprinting

Nagahori N et al., Synthetic studies on specific glyco-ligands by molecular imprinting method.
Abstracts of Papers of the American Chemical Society, 215, (CARB), 043-043, (1998)
   

imprinting

Piletsky SA et al., The rational use of hydrophobic effect-based recognition in molecularly imprinted polymers.
Journal of Molecular Recognition, 11, (1-6), 94-97, (1998)
   

imprinting

Ramström O et al., Applications of molecularly imprinted materials as selective adsorbents: Emphasis on enzymatic equilibrium shifting and library screening.
Chromatographia, 47, (7-8), 465-469, (1998)
   

imprinting

Ramström O et al., Molecular imprinting technology: Challenges and prospects for the future.
Chirality, 10, (3), 195-209, (1998)
   

imprinting

Ramström O et al., Chiral recognition by molecularly imprinted polymers in aqueous media.
Chromatographia, 48, (3-4), 197-202, (1998)
   

imprinting

Ramström O et al., Screening of a combinatorial steroid library using molecularly imprinted polymers.
Analytical Communications, 35, (1), 9-11, (1998)
   

imprinting

Reppy MA et al., Molecular imprinting via a novel mixed acetal linker for a fluorescent sensor.
Abstracts of Papers of the American Chemical Society, 216, (OLY), 060-060, (1998)
   

imprinting

Sagawa T et al., Esterolytic catalyses of self-assembled monolayers prepared by molecular imprinting of a transition-state analogue.
Abstracts of Papers of the American Chemical Society, 215, (COLL), 166-166, (1998)
   

imprinting

Santora BP et al., Toward the molecular imprinting of titanium Lewis acids: Demonstration of Diels-Alder catalysis.
Organometallics, 17, (15), 3138-3140, (1998)
   

imprinting

Schweitz L et al., Molecular imprint-based stationary phases for capillary electrochromatography.
Journal of Chromatography A, 817, (1-2), 5-13, (1998)
   

imprinting

Slade CJ et al., Induction of catalytic activity in proteins by lyophilization in the presence of a transition state analogue.
Biotechnology and Bioengineering, 57, (2), 211-215, (1998)
   

imprinting

Sreenivasan K, Synthesis and evaluation of a molecularly imprinted polyurethane-poly(HEMA) semi-interpenetrating polymer networks as membrane.
Journal of Applied Polymer Science, 70, (1), 19-22, (1998)
   

imprinting

Book chapter, Stevenson Det al., Molecular imprinted polymer for solid phase extraction of tamoxifen, 
In: Drug-development assay approaches including molecular imprinting and biomarkers, Reid E, Hill HM, Wilson ID (Eds.) 
Royal Society of Chemistry: 49-54, (1998)    

imprinting

Suedee R et al., Thin-layer chromatography using synthetic polymers imprinted with quinine as chiral stationary phase.
Jpc-Journal Of Planar Chromatography-Modern Tlc, 11, 272-276, (1998)
   

imprinting

Svenson J et al., Spectroscopic studies of the molecular imprinting self-assembly process.
Journal of Molecular Recognition, 11, (1-6), 83-86, (1998)
   

imprinting

Book chapter, Venn RFet al., Synthesis and properties of molecular imprints of darifenacin - does molecular imprinting have a future in ultra-trace bioanalysis?, 
In: Drug-development assay approaches including molecular imprinting and biomarkers, Reid E, Hill HM, Wilson ID (Eds.) 
Royal Society of Chemistry: 13-20, (1998)    

imprinting

Book chapter, Vulfson ENet al., New imprinting strategies, 
In: Drug-development assay approaches including molecular imprinting and biomarkers, Reid E, Hill HM, Wilson ID (Eds.) 
Royal Society of Chemistry: 44-48, (1998)    

imprinting

Wulff G et al., Polymerizable amidines - Adhesion mediators and binding sites for molecular imprinting.
Advanced Materials, 10, (12), 957-959, (1998)
   

imprinting

Yano K et al., Molecularly imprinted polymers which mimic multiple hydrogen bonds between nucleotide bases.
Analytica Chimica Acta, 363, (2-3), 111-117, (1998)
   

imprinting

Ye L et al., A new application of molecularly imprinted materials.
Journal of Molecular Recognition, 11, (1-6), 75-78, (1998)
   

imprinting

Yoshikawa M et al., Carboxylated polysulfone membranes having a chiral recognition site induced by an alternative molecular imprinting technique.
Polymer Bulletin, 40, (4-5), 517-524, (1998)
   

imprinting

Yu C et al., Insights into the origins of binding and the recognition properties of molecularly imprinted polymers prepared using an amide as the hydrogen-bonding functional group.
Journal of Molecular Recognition, 11, (1-6), 69-74, (1998)
   

imprinting

Zander A et al., Analysis of nicotine and its oxidation products in nicotine chewing gum by a molecularly imprinted solid phase extraction.
Analytical Chemistry, 70, (15), 3304-3314, (1998)
   

imprinting

Adbo K et al., Enantioselective Tröger’s base synthetic receptors.
Bioorganic Chemistry, 27, (5), 363-371, (1999)
   

imprinting

Allender CJ et al., Preparation of receptor mimics using the technique of molecular imprinting.
Journal of Pharmacy and Pharmacology, 51, (SUPPL.), 261-261, (1999)
   

imprinting

Arnold BR et al., Progress in the development of molecularly imprinted polymer sensors.
Johns Hopkins APL Technical Digest, 20, (2), 190-198, (1999)
   

imprinting

Book chapter, Asanuma Het al., Molecularly imprinted cyclodextrin polymers as artificial receptors - The requisites for remarkable imprinting, 
In: Proceedings of the 9th International Symposium on Cyclodextrins, Labandeira JJT, Vila-Jato JL (Eds.) 
Kluwer Academic Publishers: Dordrecht, 235-238, (1999)    

imprinting

Baba Y et al., Highly selective adsorption resins. Part 4. Synthesis of chitosan derivatives and their adsorption properties for nitrate anion.
Nippon Kagaku Kaishi, (7), 467-472, (1999)
   

imprinting

Baggiani C et al., A molecularly imprinted polymer for the pesticide bentazone.
Analytical Communications, 36, (7), 263-266, (1999)
   

imprinting

Boury B et al., Generation of porosity in a hybrid organic-inorganic xerogel by chemical treatment.
New Journal of Chemistry, 23, (5), 531-538, (1999)
   

imprinting

Braun HG et al., Microprinting - a new approach to study competitive structure formation on surfaces.
Macromolecular Rapid Communications, 20, (6), 325-327, (1999)
   

imprinting

Burleigh M et al., Removal of UO22+ and Sr2+ from aqueous solutions via sol-gel extraction. A molecular imprinting approach.
Abstracts of Papers of the American Chemical Society, 217, (NUCL), 72-72, (1999)
   

imprinting

Chesnut DJ et al., Organic/inorganic composite materials: the roles of organoamine ligands in the design of inorganic solids.
Coordination Chemistry Reviews, 190-192, (1), 737-769, (1999)
   

imprinting

Ciuffi KJ et al., Polymeric organic-inorganic hybrid material containing iron(III) porphyrin using sol-gel process.
Journal of Non-Crystalline Solids, 247, (1-3), 146-152, (1999)
   

imprinting

Cooper AI et al., Synthesis of molded monolithic porous polymers using supercritical carbon dioxide as the porogenic solvent.
Advanced Materials, 11, (15), 1270-1274, (1999)
   

imprinting

Cormack PAG et al., Molecular imprinting: recent developments and the road ahead.
Reactive and Functional Polymers, 41, (1-3), 115-124, (1999)
   

imprinting

Dai S et al., Molecular imprinting on sol-gel materials.
Abstracts of Papers of the American Chemical Society, 218, (NUCL), 123-123, (1999)
   

imprinting

Dickert FL et al., Supramolecular strategies in chemical sensing.
Materials Science & Engineering C-Biomimetic And Supramolecular Systems, 10, (1-2), 39-46, (1999)
   

imprinting

Dickert FL et al., Molecular imprinting in chemical sensing.
TrAC Trends in Analytical Chemistry, 18, (3), 192-199, (1999)
   

imprinting

Dickert FL et al., Imprinting with sensor development - On the way to synthetic antibodies.
Fresenius Journal of Analytical Chemistry, 364, (6), 506-511, (1999)
   

imprinting

Dzgoev A et al., Enantioselective molecularly imprinted polymer membranes.
Chirality, 11, (5-6), 465-469, (1999)
   

imprinting

Gagné MR et al., Molecular imprinting of transition metal catalysts.
Abstracts of Papers of the American Chemical Society, 218, (INOR), 164-164, (1999)
   

imprinting

Hart BR et al., Molecular imprinting for enantiomeric separations of benzodiazepines.
Abstracts of Papers of the American Chemical Society, 218, (OLY), 136-136, (1999)
   

imprinting

Haupt K et al., Imprinted polymer-based enantioselective acoustic sensor using a quartz crystal microbalance.
Analytical Communications, 36, (12), 391-393, (1999)
   

imprinting

Hosoya K et al., An unexpected molecular imprinting effect for a polyaromatic hydrocarbon, anthracene, using uniform size ethylene dimethacrylate particles.
HRC - Journal of High Resolution Chromatography, 22, (5), 256-260, (1999)
   

imprinting

Hunnius M et al., Selective surface adsorption versus imprinting in amorphous microporous silicas.
Microporous And Mesoporous Materials, 29, (3), 389-403, (1999)
   

imprinting

Ishii T et al., D/L selective re-binding of saccharide-imprinted [60]fullerene-bisadducts based on a saccharide-boronic acid interaction: Development of a molecular imprinting technique useful in a homogeneous system.
Tetrahedron, 55, 3883-3892, (1999)
   

imprinting

Ji HS et al., Selective piezoelectric odor sensors using molecularly imprinted polymers.
Analytica Chimica Acta, 390, (1-3), 93-100, (1999)
   

imprinting

Joshi VP et al., Molecularly imprinted adsorbents for positional isomer separation.
Journal of Chromatography A, 849, (2), 319-330, (1999)
   

imprinting

Kanekiyo Y et al., "Molecular-imprinting" of AMP utilising the polyion complex formation process as detected by a QCM system.
Journal of the Chemical Society-Perkin Transactions 2, (12), 2719-2722, (1999)
   

imprinting

Kanekiyo Y et al., "Molecular-imprinting" in polyion complexes which creates the "memory" for the AMP template.
Journal of the Chemical Society-Perkin Transactions 2, (3), 557-561, (1999)
   

imprinting

Klein JU et al., Template-mediated synthesis of a polymeric receptor specific to amino acid sequences.
Angewandte Chemie International Edition, 38, (13/14), 2057-2060, (1999)
   

imprinting

Lele BS et al., Molecularly imprinted polymer mimics of chymotrypsin - 1. Cooperative effects and substrate specificity.
Reactive and Functional Polymers, 39, (1), 37-52, (1999)
   

imprinting

Liang CD et al., Study of a molecular imprinting polymer coated BAW bio-mimic sensor and its application to the determination of caffeine in human serum and urine.
Analyst, 124, 1781-1785, (1999)
   

imprinting

Liao Y et al., Building fluorescent sensors by template polymerization: The preparation of a fluorescent sensor for L-tryptophan.
Bioorganic Chemistry, 27, (6), 463-476, (1999)
   

imprinting

Liu JQ et al., Generation of a glutathione peroxidase-like mimic using bioimprinting and chemical mutation.
Chemical Communications, (2), 199-200, (1999)
   

imprinting

Liu XC et al., Sugar acrylate-based polymers as chiral molecularly imprintable hydrogels.
Journal of Polymer Science Part A: Polymer Chemistry, 37, (11), 1665-1671, (1999)
   

imprinting

Markowitz MA et al., Template-directed molecular imprinting.
Abstracts of Papers of the American Chemical Society, 218, (INOR), 245-245, (1999)
   

imprinting

Meng ZH et al., Molecule imprinting chiral stationary phase.
Biomedical Chromatography, 13, (6), 389-393, (1999)
   

imprinting

Meng ZH et al., Making high selective molecule imprinting polymer (MIP) in polar solvent.
Chinese Chemical Letters, 10, (1), 69-72, (1999)
   

imprinting

Owens PK et al., Molecular imprinting for bio-and pharmaceutical analysis.
TrAC Trends in Analytical Chemistry, 18, (3), 146-154, (1999)
   

imprinting

Proceeding, Panasyuk T et al, Selective films prepared by imprinting electropolymerization of metalloporphyrins, 
Di Natale C, D’Amico A, Sberveglieri G (Eds.), 
25-29, (1999)
   

imprinting

Peissker F et al., Crosslinking of imprinted proteases to maintain a tailor-made substrate selectivity in aqueous solutions.
Bioorganic & Medicinal Chemistry, 7, 2231-2237, (1999)
   

imprinting

Peppas NA et al., Poly(ethylene glycol)-containing hydrogels in drug delivery.
Journal of Controlled Release, 62, (1-2), 81-87, (1999)
   

imprinting

Piletsky SA et al., Molecularly imprinted self-assembled films with specificity to cholesterol.
Sensors and Actuators B: Chemical, 60, (2-3), 216-220, (1999)
   

imprinting

Piletsky SA et al., Receptor and transport properties of imprinted polymer membranes - a review.
Journal of Membrane Science, 157, (2), 263-278, (1999)
   

imprinting

Polborn K et al., Molecular imprinting with an organometallic transition state analogue.
Chemical Communications, (24), 2481-2482, (1999)
   

imprinting

Sasaki DY et al., Molecular imprinting in guanidine functionalized sol-gel materials.
Abstracts of Papers of the American Chemical Society, 217, (HYS), 211-211, (1999)
   

imprinting

Schweitz L et al., Molecular imprinting for chiral separations and drug screening purposes using monolithic stationary phases in CEC.
Chromatographia, 49, (Supplement 1), S93-S94, (1999)
   

imprinting

Spivak D et al., Molecular imprinting of carboxylic acids employing novel functional macroporous polymers.
Journal of Organic Chemistry, 64, (13), 4627-4634, (1999)
   

imprinting

Sreenivasan K et al., Imparting recognition sites in poly(HEMA) for two compounds through molecular imprinting.
Journal of Applied Polymer Science, 71, (11), 1823-1826, (1999)
   

imprinting

Suárez-Rodríguez JL et al., Molecularly imprinted polymers for developing biomimetic optical sensors.
Quimica Analitica, 18, (Suppl 1), 20-22, (1999)
   

imprinting

Takeuchi T et al., Separation and sensing based on molecular recognition using molecularly imprinted polymers.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 728, (1), 1-20, (1999)
   

imprinting

Book chapter, Tanabe Tet al., Molecular imprinting system using cyclodextrin, 
In: Proceedings of the 9th International Symposium on Cyclodextrins, Labandeira JJT, Vila-Jato JL (Eds.) 
Kluwer Academic Publishers: Dordrecht, 517-520, (1999)    

imprinting

Wang W et al., Building fluorescent sensors by template polymerization: The preparation of a fluorescent sensor for D-Fructose.
Organic Letters, 1, 1209-1212, (1999)
   

imprinting

Yano K et al., Molecularly imprinted polymers for biosensor applications.
TrAC Trends in Analytical Chemistry, 18, (3), 199-204, (1999)
   

imprinting

Ye L et al., Molecularly imprinted monodisperse microspheres for competitive radioassay.
Analytical Communications, 36, (2), 35-38, (1999)
   

imprinting

Yilmaz E et al., Influence of functional and cross-linking monomers and the amount of template on the performance of molecularly imprinted polymers in binding assays.
Analytical Communications, 36, (5), 167-170, (1999)
   

imprinting

Yoshida M et al., Metal ion imprinted microsphere prepared by surface molecular imprinting technique using water-in-oil-in-water emulsions.
Journal of Applied Polymer Science, 73, (7), 1223-1230, (1999)
   

imprinting

Yoshikawa M et al., Alternative molecular imprinting, a facile way to introduce chiral recognition sites.
Reactive and Functional Polymers, 42, (1), 93-102, (1999)
   

imprinting

Yoshikawa M et al., Alternative molecularly imprinted membranes from a derivative of natural polymer, cellulose acetate.
Journal of Applied Polymer Science, 72, (4), 493-499, (1999)
   

imprinting

Zhou J et al., Binding study on 5,5-diphenylhydantoin imprinted polymer constructed by utilizing an amide functional group.
Analytica Chimica Acta, 394, (2-3), 353-359, (1999)
   

imprinting

Allender CJ et al., Pharmaceutical applications for molecularly imprinted polymers.
International Journal of Pharmaceutics, 195, (1-2), 39-43, (2000)
   

imprinting

Andersson LI, Molecular imprinting: developments and applications in the analytical chemistry field.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 745, (1), 3-13, (2000)
   

imprinting

Andersson LI, Molecular imprinting for drug bioanalysis - A review on the application of imprinted polymers to solid-phase extraction and binding assay.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 739, (1), 163-173, (2000)
   

imprinting

Asanuma H et al., Tailor-made receptors by molecular imprinting.
Advanced Materials, 12, (14), 1019-1030, (2000)
   

imprinting

Baggiani C et al., Chromatographic characterization of molecularly imprinted polymers binding the herbicide 2,4,5-trichlorophenoxyacetic acid.
Journal of Chromatography A, 883, (1-2), 119-126, (2000)
   

imprinting

Burleigh MC et al., Selective adsorption of metal ions with functionalized sol-gel sorbents via molecular imprinting.
Abstracts of Papers of the American Chemical Society, 219, (INOR), 750-750, (2000)
   

imprinting

Cooper AI et al., Synthesis of well-defined macroporous polymer monoliths by sol-gel polymerization in supercritical CO2.
Industrial & Engineering Chemistry Research, 39, (12), 4741-4744, (2000)
   

imprinting

Dickert FL et al., Molecular fingerprints using imprinting techniques.
Advanced Materials, 12, (4), 311-314, (2000)
   

imprinting

Dickert FL et al., Quality control of automotive engine oils with mass-sensitive chemical sensors - QCMs and molecularly imprinted polymers.
Fresenius Journal of Analytical Chemistry, 366, (8), 802-806, (2000)
   

imprinting

Ellwanger A et al., Application of molecularly imprinted polymers in supercritical fluid chromatography.
Journal of Chromatography A, 897, (1-2), 317-327, (2000)
   

imprinting

Enoki T et al., Frustrations in polymer conformation in gels and their minimization through molecular imprinting.
Physical Review Letters, 85, (23), 5000-5003, (2000)
   

imprinting

Freemantle M, Imprinting enhances organometallic catalysis.
Chemical & Engineering News, 78, (2), 31-32, (2000)
   

imprinting

Fukusaki EI et al., An artificial plastic receptor that discriminates axial asymmetry.
Journal of Bioscience and Bioengineering, 90, (6), 665-668, (2000)
   

imprinting

Iamamoto Y et al., Porphyrinosilica and metalloporphyrinosilica: Hybrid organic-inorganic materials prepared by sol-gel processing.
Anais Da Academia Brasileira De Ciencias, 72, (1), 59-66, (2000)
   

imprinting

Jeong SW et al., 2D imprinting of myoglobin on polymerizable liposomes.
Abstracts of Papers of the American Chemical Society, 220, (COLL), 168-168, (2000)
   

imprinting

Ji HS et al., Increasing the sensitivity of piezoelectric odour sensors based on molecularly imprinted polymers.
Biosensors and Bioelectronics, 15, (7-8), 403-409, (2000)
   

imprinting

Katz A et al., Molecular imprinting of bulk, microporous silica.
Nature, 403, (6767), 286-289, (2000)
   

imprinting

Book chapter, Kempe M, Synthetic oxytocin receptors prepared by molecular imprinting, 
In: Peptides for the New Millennium, Fields GB, Tam JP, Barany G (Eds.) 
Kluwer Academic Publishers: Dordrecht, 534-535, (2000)    

imprinting

Larsen AO et al., Toward asymmetric catalysis vie the molecular imprinting of titanium Lewis acid/Lewis base adducts.
Abstracts of Papers of the American Chemical Society, 219, (INOR), 243-243, (2000)
   

imprinting

Liang CD et al., Molecular imprinting polymer coated BAW bio-mimic sensor for direct determination of epinephrine.
Analytica Chimica Acta, 415, (1-2), 135-141, (2000)
   

imprinting

Lulka MF et al., Molecular imprinting of Ricin and its A and B chains to organic silanes: fluorescence detection.
Materials Science & Engineering C-Biomimetic And Supramolecular Systems, 11, (2), 101-105, (2000)
   

imprinting

Maier G et al., "Core shell" hyperbranched polymers for molecular imprinting.
Abstracts of Papers of the American Chemical Society, 219, (OLY), 73-73, (2000)
   

imprinting

Mao Y et al., Theory of chiral imprinting.
Physical Review Letters, 84, (23), 5335-5338, (2000)
   

imprinting

Markowitz MA et al., Catalytic silica particles via template-directed molecular imprinting.
Langmuir, 16, (4), 1759-1765, (2000)
   

imprinting

Matsui J et al., Solid-phase extraction with a dibutylmelamine-imprinted polymer as triazine herbicide-selective sorbent.
Journal of Chromatography A, 889, (1-2), 25-31, (2000)
   

imprinting

Morissette P et al., A specific artificial antibody toward mycophenolic acid prepared by molecular imprinting.
Clinical Chemistry, 46, (9), 1516-1518, (2000)
   

imprinting

Nickel AML et al., Improving selectivity of CdSe chemical sensors using molecular imprinting.
Abstracts of Papers of the American Chemical Society, 220, (INOR), 431-431, (2000)
   

imprinting

Nilsson S et al., Capillary electrochromatography plus molecular imprinting equals drug analysis?
Chromatographia, 52, S24-S24, (2000)
   

imprinting

Oral E et al., Molecular imprinting in biological systems.
Stp Pharma Sciences, 10, (4), 261-267, (2000)
   

imprinting

Ousalem M et al., Evaluation of the porous structures of new polymer packing materials by inverse size-exclusion chromatography.
Journal of Chromatography A, 903, (1-2), 13-19, (2000)
   

imprinting

Polborn K et al., Biomimetic catalysis with immobilised organometallic ruthenium complexes: Substrate- and regioselective transfer hydrogenation of ketones.
Chemistry - A European Journal, 6, (24), 4604-4611, (2000)
   

imprinting

Polborn K et al., Biomimetic catalysis with an immobilised chiral rhodium(III) complex.
European Journal of Inorganic Chemistry, (8), 1687-1692, (2000)
   

imprinting

Rivera JM et al., Chiral guests and their ghosts in reversibly assembled hosts.
Angewandte Chemie International Edition, 39, (12), 2130-2132, (2000)
   

imprinting

Sasaki DY et al., Solid-state 31P NMR study of phosphonate binding sites in guanidine-functionalized, molecular imprinted silica xerogels.
Chemistry of Materials, 12, (5), 1400-1407, (2000)
   

imprinting

Saunders GD et al., A selective uranium extraction agent prepared by polymer imprinting.
Chemical Communications, (4), 273-274, (2000)
   

imprinting

Sellergren B, Imprinted polymers with memory for small molecules, proteins, or crystals.
Angewandte Chemie International Edition, 39, (6), 1031-1037, (2000)
   

imprinting

Sellergren B et al., Enantioselective ester hydrolysis catalyzed by imprinted polymers. 2.
Journal of Organic Chemistry, 65, (13), 4009-4027, (2000)
   

imprinting

Severin K, Imprinted polymers with transition metal catalysts.
Current Opinion in Chemical Biology, 4, (6), 710-714, (2000)
   

imprinting

Shin YS et al., Ordered Hierarchical Porous Materials: Towards Tunable Size- and Shape-Selective Microcavities in Nanoporous Channels.
Angewandte Chemie International Edition, 39, (15), 2702-2707, (2000)
   

imprinting

Slade CJ, Molecular (or bio-) imprinting of bovine serum albumin.
Journal of Molecular Catalysis B: Enzymatic, 9, (1-3), 97-105, (2000)
   

imprinting

Subrahmanyam S et al., Bite-and-switch approach to creatine recognition by use of molecularly imprinted polymers.
Advanced Materials, 12, (10), 722-724, (2000)
   

imprinting

Suzuki A et al., Preparation of shape selective acid catalysts by a surface molecular imprinting method.
unknown source, (2000)
   

imprinting

Vallano PT et al., Highly selective separations by capillary electrochromatography: molecular imprint polymer sorbents.
Journal of Chromatography A, 887, (1-2), 125-135, (2000)
   

imprinting

Wang JF et al., Simultaneous chiral separation using a combinatorial molecular imprinting phase.
Chinese Chemical Letters, 11, (1), 65-68, (2000)
   

imprinting

Wu C, Molecules leave their mark: Imprinting technique creates plastic receptors that grab specific chemicals.
Science News, 157, (12), 186-188, (2000)
   

imprinting

Yilmaz E et al., The use of immobilized templates - A new approach in molecular imprinting.
Angewandte Chemie International Edition, 39, (12), 2115-2118, (2000)
   

imprinting

Yoshida M et al., Chiral-recognition polymer prepared by surface molecular imprinting technique.
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 169, (1-3), 259-269, (2000)
   

imprinting

Yoshida M et al., Metal-imprinted microsphere prepared by surface template polymerization and its application to chromatography.
Journal of Polymer Science Part A: Polymer Chemistry, 38, (4), 689-696, (2000)
   

imprinting

Yoshida M et al., Surface imprinted polymers recognizing amino acid chirality.
Journal of Applied Polymer Science, 78, (4), 695-703, (2000)
   

imprinting

Akiyama T et al., Molecular imprinting of cyclodextrin on silica-gel support for the stationary phase of high-performance-liquid-chromatography.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 41, (1-4), 149-153, (2001)
   

imprinting

Alvarez-Lorenzo C et al., Reversible adsorption of calcium ions by imprinted temperature sensitive gels.
Journal of Chemical Physics, 114, (6), 2812-2816, (2001)
   

imprinting

Asanuma H et al., Molecular imprinting of cyclodextrin in water for the recognition of nanometer-scaled guests.
Analytica Chimica Acta, 435, (1), 25-33, (2001)
   

imprinting

Barnes CE et al., Phosphonic acid containing sol-gel sorbents for Sr(II) and uranyl: Imprinting effects.
Abstracts of Papers of the American Chemical Society, 221, (INOR), 585-585, (2001)
   

imprinting

Batra D et al., Molecular imprinting of oligonucleotides.
Abstracts of Papers of the American Chemical Society, 221, (ORGN), 158-158, (2001)
   

imprinting

Biffis A et al., Molecular design of novel transition state analogues for molecular imprinting.
New Journal of Chemistry, 25, (12), 1537-1542, (2001)
   

imprinting

Biffis A et al., The synthesis, characterization and molecular recognition properties of imprinted microgels.
Macromolecular Chemistry And Physics, 202, (1), 163-171, (2001)
   

imprinting

Brüggemann O, Chemical reaction engineering using molecularly imprinted polymeric catalysts.
Analytica Chimica Acta, 435, (1), 197-207, (2001)
   

imprinting

Brüggemann O, Catalytically active polymers obtained by molecular imprinting and their application in chemical reaction engineering.
Biomolecular Engineering, 18, (1), 1-7, (2001)
   

imprinting

Buchmeiser MR, New synthetic ways for the preparation of high-performance liquid chromatography supports.
Journal of Chromatography A, 918, (2), 233-266, (2001)
   

imprinting

Bures P et al., Surface modifications and molecular imprinting of polymers in medical and pharmaceutical applications.
Journal of Controlled Release, 72, (1-3), 25-33, (2001)
   

imprinting

Burleigh MC et al., Imprinted polysilsesquioxanes for the enhanced recognition of metal ions.
Chemistry of Materials, 13, (8), 2537-2546, (2001)
   

imprinting

Cammidge AN et al., Synthesis of heterogeneous palladium catalyst assemblies by molecular imprinting.
Chemical Communications, (24), 2588-2589, (2001)
   

imprinting

Cao L et al., Enantioselective sensor based on microgravimetric quartz crystal microbalance with molecularly imprinted polymer film.
Analyst, 126, (2), 184-188, (2001)
   

imprinting

Chen W et al., The specificity of a chlorphenamine-imprinted polymer and its application.
Talanta, 55, (1), 29-34, (2001)
   

imprinting

Chen W et al., Molecular recognition of procainamide-imprinted polymer.
Analytica Chimica Acta, 432, (2), 277-282, (2001)
   

imprinting

D’Souza SM et al., Control of crystal morphology via molecular imprinting.
Polymer International, 50, (4), 429-432, (2001)
   

imprinting

Dai S, Hierarchically imprinted sorbents.
Chemistry - A European Journal, 7, (4), 763-768, (2001)
   

imprinting

Book chapter, Dickert FLet al., QCM and SAW transducers allow analyte detection from nanometer- to micrometer-dimensions using imprinting techniques, 
In: Proceedings Of The 2001 IEEE International Frequency Control Symposium & PDA Exhibition, 
528-534, (2001)    

imprinting

Dickert FL et al., Double molecular imprinting - a new sensor concept for improving selectivity in the detection of polycyclic aromatic hydrocarbons (PAHs) in water.
Fresenius Journal of Analytical Chemistry, 371, (1), 11-15, (2001)
   

imprinting

Dickert FL et al., Synthetic receptors as sensor coatings for molecules and living cells.
Analyst, 126, (6), 766-771, (2001)
   

imprinting

Ensing K et al., Selective sorbents for solid-phase extraction based on molecularly imprinted polymers.
Lc Gc North America, 19, (9), 942-954, (2001)
   

imprinting

Friggeri A et al., From solutions to surfaces: A novel molecular imprinting method based on the conformational changes of boronic-acid-appended poly(L-lysine).
Angewandte Chemie International Edition, 40, (24), 4729-4731, (2001)
   

imprinting

Gagné MR et al., Macroporous organic polymers as hosts for late metal catalysts: Molecular imprinting effects in catalysis.
Abstracts of Papers of the American Chemical Society, 221, (INOR), 298-298, (2001)
   

imprinting

Gao SH et al., Building fluorescent sensors for carbohydrates using template-directed polymerizations.
Bioorganic Chemistry, 29, (5), 308-320, (2001)
   

imprinting

Hayden O et al., Selective microorganism detection with cell surface imprinted polymers.
Advanced Materials, 13, (19), 1480-1483, (2001)
   

imprinting

Hentze HP et al., Template synthesis of porous organic polymers.
Current Opinion in Solid State & Materials Science, 5, (4), 343-353, (2001)
   

imprinting

Hirayama K et al., Synthesis of polymer particles with specific lysozyme recognition sites by a molecular imprinting technique.
Journal of Applied Polymer Science, 81, (14), 3378-3387, (2001)
   

imprinting

Hishiya T et al., Molecular imprinting of cyclodextrin in homogeneous solutions.
Biological Journal of Armenia, 53, 65-69, (2001)
   

imprinting

Hwang CC et al., Chromatographic resolution of the enantiomers of phenylpropanolamine by using molecularly imprinted polymer as the stationary phase.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 765, (1), 45-53, (2001)
   

imprinting

Jenkins AL et al., Molecularly imprinted polymers for the detection of chemical agents in water.
Abstracts of Papers of the American Chemical Society, 221, (MSE), 42-42, (2001)
   

imprinting

Khasawneh MA et al., Affinity screening by packed capillary high performance liquid chromatography using molecular imprinted sorbents II. Covalent imprinted polymers.
Journal of Chromatography A, 922, (1-2), 87-97, (2001)
   

imprinting

Kimaro A et al., Molecularly imprinted ionically permeable membrane for uranyl ion.
Chemical Communications, (14), 1282-1283, (2001)
   

imprinting

Knopp D et al., Comparison of molecularly imprinted polymers (MIPs) and sol-gel based immunoaffinity supports for the extraction of sulfonylurea herbicides from aqueous samples.
Abstracts of Papers of the American Chemical Society, 221, (AGRO), 61-61, (2001)
   

imprinting

Kobayashi T et al., Molecular imprinting of caffeine and its recognition assay by quartz-crystal microbalance.
Analytica Chimica Acta, 435, (1), 141-149, (2001)
   

imprinting

Kronenburg NAE et al., Improvement of enantioselectivity by immobilized imprinting of epoxide hydrolase from Rhodotorula glutinis.
Journal of Molecular Catalysis B: Enzymatic, 16, (3-4), 121-129, (2001)
   

imprinting

Lahav M et al., Imprinting of chiral molecular recognition sites in thin TiO2 films associated with field-effect transistors: Novel functionalized devices for chiroselective and chirospecific analyses.
Chemistry - A European Journal, 7, (18), 3992-3997, (2001)
   

imprinting

Lanza F et al., The application of molecular imprinting technology to solid phase extraction.
Chromatographia, 53, (11-12), 599-611, (2001)
   

imprinting

Leung MKP et al., A sol-gel derived molecular imprinted luminescent PET sensing material for 2,4-dichlorophenoxyacetic acid.
Journal of Materials Chemistry, 11, (12), 2985-2991, (2001)
   

imprinting

Lo HC et al., Synthesis of a [{mono-N-(4-vinylbenzyl)-1,4,7- triazacyclononane}(2)Hg](OTf)(2) sandwich complex, polymerization of this monomer with divinylbenzene, and Hg2+ ion selectivity studies with the demetallated resin.
European Journal of Inorganic Chemistry, (9), 2217-2220, (2001)
   

imprinting

Maier G et al., Molecular imprinting and molecular recognition in hyperbranched polymers.
Abstracts of Papers of the American Chemical Society, 221, (MSE), 168-168, (2001)
   

imprinting

Makote RD et al., Matrix-induced modification of imprinting effect for Cu2+ adsorption in hybrid silica matrices.
Analytica Chimica Acta, 435, (1), 169-175, (2001)
   

imprinting

Martín-Esteban A et al., Effect of template size on the selectivity of molecularly imprinted polymers for phenylurea herbicides.
Chromatographia, 53, (Supplement 1), S434-S437, (2001)
   

imprinting

Martín-Esteban A, Molecularly imprinted polymers: new molecular recognition materials for selective solid-phase extraction of organic compounds.
Fresenius Journal of Analytical Chemistry, 370, (7), 795-802, (2001)
   

imprinting

Marx S et al., Molecular imprinting in thin films of organic-inorganic hybrid sol-gel and acrylic polymers.
Chemistry of Materials, 13, (10), 3624-3630, (2001)
   

imprinting

Mirsky VM et al., Chemical sensors based on ultrathin membranes from molecularly imprinted polymers.
Biologicheskie Membrany, 18, (6), 496-501, (2001)
   

imprinting

Mitchell GR et al., Temperature insensitive chiral optical films prepared through the soft imprinting of liquid crystal elastomers.
Abstracts of Papers of the American Chemical Society, 222, (MSE), 356-356, (2001)
   

imprinting

Mosbach K, Towards the development of artificial recognition elements in sensor technology vision with emphasis on molecular imprinting.
Electrochemistry, 69, (12), 919-919, (2001)
   

imprinting

Möller K et al., Synthesis and evaluation of molecularly imprinted polymers for extracting hydrolysis products of organophosphate flame retardants.
Journal of Chromatography A, 938, (1-2), 121-130, (2001)
   

imprinting

Nicholls IA et al., Can we rationally design molecularly imprinted polymers?
Analytica Chimica Acta, 435, (1), 9-18, (2001)
   

imprinting

Nickel AML et al., Imprinted poly(acrylic acid) films on cadmium selenide. A composite sensor structure that couples selective amine binding with semiconductor substrate photoluminescence.
Chemistry of Materials, 13, (4), 1391-1397, (2001)
   

imprinting

Petcu M et al., Molecular imprinting of a small substituted phenol of biological importance.
Analytica Chimica Acta, 435, (1), 49-55, (2001)
   

imprinting

Piletsky SA et al., Molecular imprinting: at the edge of the third millennium.
Trends In Biotechnology, 19, (1), 9-12, (2001)
   

imprinting

Pribisko MA et al., Probing the origin of selective rebinding in molecularly imprinted polymers.
Abstracts of Papers of the American Chemical Society, 221, (CHED), 381-381, (2001)
   

imprinting

Rachkov A et al., Towards molecularly imprinted polymers selective to peptides and proteins. The epitope approach.
Biochimica et Biophysica Acta - Protein Structure and Molecular Enzymology, 1544, (1-2), 255-266, (2001)
   

imprinting

Schweitz L et al., Approaches to molecular imprinting based selectivity in capillary electrochromatography.
Electrophoresis, 22, (19), 4053-4063, (2001)
   

imprinting

Book chapter, Sellergren B, Enantiomer separations using designed imprinted chiral phases, 
In: Chiral Separation Techniques: A Practical Approach, Subramanian G (Ed.) 
Wiley-VCH Verlag GmbH: Weinheim, 153-184, (2001)    

imprinting

Spivak DA et al., Molecular imprinting in nanometer scale particles.
Abstracts of Papers of the American Chemical Society, 221, (IEC), 95-95, (2001)
   

imprinting

Spivak DA et al., Synthesis of amino-acid based crosslinking monomers for molecular imprinting.
Abstracts of Papers of the American Chemical Society, 221, (ORGN), 108-108, (2001)
   

imprinting

Spivak DA, Development of novel crosslinking monomers for molecularly imprinted polymers.
Abstracts of Papers of the American Chemical Society, 221, (ORGN), 694-694, (2001)
   

imprinting

Sreenivasan K, The use of metal-containing monomer in the preparation of molecularly imprinted polymer to increase the adsorption capacity.
Journal of Applied Polymer Science, 80, (14), 2795-2799, (2001)
   

imprinting

Suedee R et al., Thin-layer chromatographic separation of chiral drugs on molecularly imprinted chiral stationary phases.
Jpc-Journal Of Planar Chromatography-Modern Tlc, 14, (3), 194-198, (2001)
   

imprinting

Sun BW et al., Molecularly imprinted polymer using p-hydroxybenzoic acid, p- hydroxyphenylacetic acid and p-hydroxyphenylpropionic acid as templates.
Journal of Molecular Recognition, 14, (6), 388-392, (2001)
   

imprinting

Tan YG et al., A piezoelectric biomimetic sensor for aminopyrine with a molecularly imprinted polymer coating.
Analyst, 126, (5), 664-668, (2001)
   

imprinting

Tan YG et al., A study of a bio-mimetic recognition material for the BAW sensor by molecular imprinting and its application for the determination of paracetamol in the human serum and urine.
Talanta, 55, (2), 337-347, (2001)
   

imprinting

Tarbin JA et al., Development of molecularly imprinted phase for the selective retention of stilbene-type estrogenic compounds.
Analytica Chimica Acta, 433, (1), 71-79, (2001)
   

imprinting

Book chapter, Theodoridis G, Molecularly imprinted polymers for affinity chromatography, 
In: Encyclopedia of Chromatography, Cazes J (Ed.) 
Marcel Dekker: New York, 1-6, (2001)    

imprinting

Tong D et al., Some studies of the chromatographic properties of gels ("artificial antibodies/receptors") for selective adsorption of proteins.
Chromatographia, 54, (1-2), 7-14, (2001)
   

imprinting

Umpleby RJ et al., Toward a standard method for calculating the binding parameters of molecularly imprinted polymers.
Abstracts of Papers of the American Chemical Society, 221, (OLY), 340-340, (2001)
   

imprinting

Vaidya AA et al., Creating a macromolecular receptor by affinity imprinting.
Journal of Applied Polymer Science, 81, (5), 1075-1083, (2001)
   

imprinting

Vigneau O et al., Ionic imprinted resins based on EDTA and DTPA derivatives for lanthanides(III) separation.
Analytica Chimica Acta, 435, (1), 75-82, (2001)
   

imprinting

Yan M et al., Fabrication of molecularly imprinted polymer microstructures.
Analytica Chimica Acta, 435, (1), 163-167, (2001)
   

imprinting

Ye L et al., The technique of molecular imprinting - Principle, state of the art, and future aspects.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 41, (1-4), 107-113, (2001)
   

imprinting

Ye L et al., Molecular imprinting on microgel spheres.
Analytica Chimica Acta, 435, (1), 187-196, (2001)
   

imprinting

Yoshikawa M et al., Recognition and selective transport of nucleic acid components through molecularly imprinted polymeric membranes.
Macromolecular Materials And Engineering, 286, (1), 52-59, (2001)
   

imprinting

Yoshikawa M et al., Factors governing chiral recognition ability of molecularly imprinted oligopeptide membranes.
Abstracts of Papers of the American Chemical Society, 222, (COLL), 9-9, (2001)
   

imprinting

Zhang ZT et al., Ion-imprinted zeolite: A surface functionalization methodology based on the "ship-in-bottle" technique.
Advanced Materials, 13, (7), 493-496, (2001)
   

imprinting

Zheng N et al., Chromatographic characterization of sulfonamide imprinted polymers.
Microchemical Journal, 69, (2), 153-158, (2001)
   

imprinting

Zhou XZ et al., Synthesis of molecularly imprinted polymer membranes and their application to the selective transport of targeted molecules.
Abstracts of Papers of the American Chemical Society, 221, (ORGN), 377-377, (2001)
   

imprinting

Anon, Need a molecule? Try molecular imprinting.
R&D Magazine, 44, (9), 13-13, (2002)
   

imprinting

Proceeding, Abe M et al, Novel nylon imprinted assembly for amino acids recognition, 
In: Polymer Preprints, Japan, 
1671, (2002)
   

imprinting

Alvarez-Lorenzo C et al., Soft contact lenses capable of sustained delivery of timolol.
Journal of Pharmaceutical Sciences, 91, (10), 2182-2192, (2002)
   

imprinting

Andersson LI, Selective solid-phase extraction of bio- and environmental samples using molecularly imprinted polymers.
Bioseparation, 10, (6), 353-364, (2002)
   

imprinting

Araki K et al., Enantioselective polymer prepared by surface imprinting technique using a bifunctional molecule.
Analytica Chimica Acta, 469, (2), 173-181, (2002)
   

imprinting

Becker JJ et al., Metallo-dendrimers in molecular imprinting.
Abstracts of Papers of the American Chemical Society, 224, (INOR), 408-408, (2002)
   

imprinting

Brenner JR et al., A molecularly imprinted polymer for recognition of S-(-)-timolol.
Abstracts of Papers of the American Chemical Society, 223, (ANYL), 022-022, (2002)
   

imprinting

Bruening ML et al., Imprinting of photocleavable monomers on gold films.
Abstracts of Papers of the American Chemical Society, 223, (CHED), 731-731, (2002)
   

imprinting

Brunet E, Asymmetric induction under confinement.
Chirality, 14, (2-3), 135-143, (2002)
   

imprinting

Byrne ME et al., Molecular imprinting within hydrogels.
Advanced Drug Delivery Reviews, 54, (1), 149-161, (2002)
   

imprinting

Byrne ME et al., Networks for recognition of biomolecules: Molecular imprinting and micropatterning poly(ethylene glycol)-containing films.
Polymers for Advanced Technologies, 13, (10-12), 798-816, (2002)
   

imprinting

Carter SR et al., Surface molecular imprinting in aqueous medium on polymer core-shell particles.
Abstracts of Papers of the American Chemical Society, 224, (COLL), 363-363, (2002)
   

imprinting

Book chapter, Chen Bet al., Molecular imprinting and sol-gel encapsulated Rh catalysts for styrene hydroformylation, 
In: Catalysis of Organic Reactions, Morrell D (Ed.) 
Marcel Dekker: (2002)    

imprinting

Chow CF et al., Fluorescent sensing of homocysteine by molecular imprinting.
Analytica Chimica Acta, 466, (1), 17-30, (2002)
   

imprinting

Coutinho D et al., Molecular imprinting of mesoporous SBA-15 with chiral ruthenium complexes.
Microporous And Mesoporous Materials, 54, (3), 249-255, (2002)
   

imprinting

Cui A et al., Enzyme-based molecular imprinting with metals.
Biomacromolecules, 3, (6), 1353-1358, (2002)
   

imprinting

Davidson L et al., Molecular imprinting of biologically active steroidal systems.
Current Organic Chemistry, 6, (3), 265-281, (2002)
   

imprinting

de Vrese M et al., Searching for new bioactive substances from milk.
Bulletin Of The International Dairy Federation No 375/2002 - Fresh Perspectives On Bioactive Dairy Foods, 47-53, (2002)
   

imprinting

Ensing K et al., Selective sorbents for solid-phase extraction based on molecularly imprinted polymers.
Lc Gc Europe, 15, (1), 16-+, (2002)
   

imprinting

Fujiwara I et al., Preparation of an organic acid-imprinted resin by a surface imprinting method.
Analytical Sciences, 18, (8), 943-945, (2002)
   

imprinting

Furukawa S et al., Effect of imprinting sol-gel immobilized lipase with chiral template substrates in esterification of (R)-(+)- and (S)-(-)-glycidol.
Journal of Molecular Catalysis B: Enzymatic, 17, (1), 23-28, (2002)
   

imprinting

Güney O et al., Metal ion templated chemosensor for metal ions based on fluorescence quenching.
Sensors and Actuators B: Chemical, 85, (1-2), 86-89, (2002)
   

imprinting

Haginaka J, HPLC-based bioseparations using molecularly imprinted polymers.
Bioseparation, 10, (6), 337-351, (2002)
   

imprinting

Han M et al., Generation of molecular recognition sites using emulsion polymerization on porous membranes.
Abstracts of Papers of the American Chemical Society, 224, (COLL), U445-U446, (2002)
   

imprinting

Book chapter, Hart BRet al., Molecularly Imprinted Polymers, 
In: Encyclopedia of Polymer Science and Technology, 
John Wiley & Sons, Inc.: (2002)    

imprinting

Hentze HP et al., Porous polymers and resins for biotechnological and biomedical applications.
Reviews in Molecular Biotechnology, 90, (1), 27-53, (2002)
   

imprinting

Hiratani H et al., Timolol uptake and release by imprinted soft contact lenses made of N,N-diethylacrylamide and methacrylic acid.
Journal of Controlled Release, 83, (2), 223-230, (2002)
   

imprinting

Hirayama K et al., Preparation of a sensor device with specific recognition sites for acetaldehyde by molecular imprinting technique.
Sensors and Actuators B: Chemical, 86, (1), 20-25, (2002)
   

imprinting

Hishiya T et al., Molecular imprinting of cyclodextrins leading to synthetic antibodies.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 44, (1-4), 365-367, (2002)
   

imprinting

Proceeding, Hishiya T et al, Imprinted cyclodextrin polymers on silica surface for the preparation of HPLC stationary phases, 
In: Polymer Preprints, Japan, 
330, (2002)
   

imprinting

Hwang CC et al., Chromatographic characteristics of cholesterol-imprinted polymers prepared by covalent and non-covalent imprinting methods.
Journal of Chromatography A, 962, (1-2), 69-78, (2002)
   

imprinting

Ichinose I et al., Wrapping and inclusion of organic molecules with ultrathin, amorphous metal oxide films.
Chemical Record, 2, (5), 339-351, (2002)
   

imprinting

Proceeding, Ito K, Conformational memory in heteropolymer gel by molecular imprinting, 
In: Polymer Preprints, Japan, 
1290, (2002)
   

imprinting

Proceeding, Kanekiyo Y et al, Endocrine disruptor-responsive QCM sensors constructed using molecularly imprinted amylose as sensing elements, 
In: Polymer Preprints, Japan, 
1661, (2002)
   

imprinting

Kanekiyo Y et al., Molecular imprinting of bisphenol A and alkylphenols using amylose as a host matrix.
Chemical Communications, (22), 2698-2699, (2002)
   

imprinting

Proceeding, Kikuchi T et al, Syntheses and properties of temperature-responsive polymer gels with protein recognition sites by using the molecular imprinting techniqueSyntheses and properties of temperature-responsive polymer gels with protein recognition sites by using the molecular imprinting technique, 
In: Polymer Preprints, Japan, 
1665, (2002)
   

imprinting

Kirchner R et al., Calorimetric investigation of chiral recognition processes in a molecularly imprinted polymer.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 43, (3-4), 279-283, (2002)
   

imprinting

Kobayashi T et al., Phase inversion molecular imprinting by using template copolymers for high substrate recognition.
Langmuir, 18, (7), 2866-2872, (2002)
   

imprinting

Kobayashi T et al., Molecularly imprinted polysulfone membranes having acceptor sites for donor dibenzofuran as novel membrane adsorbents: Charge transfer interaction as recognition origin.
Chemistry of Materials, 14, (6), 2499-2505, (2002)
   

imprinting

Proceeding, Kondo F et al, Molecular design of hydrogel catalyst for hydrolysis -Attempt to molecular imprinting in water-, 
In: Polymer Preprints, Japan, 
1429, (2002)
   

imprinting

Lehmann M et al., Selective separations and hydrodynamic studies: a new approach using molecularly imprinted nanosphere composite membranes.
Desalination, 149, (1-3), 315-321, (2002)
   

imprinting

Lei JD et al., Enantioselective separation of naproxen and investigation of affinity chromatography model using molecular imprinting.
Biochemical Engineering Journal, 11, (2-3), 175-179, (2002)
   

imprinting

Li XT et al., Enantiomeric resolution on L-carnitine selective polymers prepared by molecular imprinting.
Chinese Chemical Letters, 13, (2), 157-158, (2002)
   

imprinting

Book chapter, Li ZJet al., Synthesis and adsorption properties of novel carbons of tailored porosity, 
In: Nanoporous Materials III, Sayari A, Jaroniec M (Eds.) 
Elsevier: Amsterdam, 345-352, (2002)    

imprinting

Liang CD et al., Change of pH indicator’s pKa value via molecular imprinting.
Chemical Communications, (15), 1620-1621, (2002)
   

imprinting

Lu Y et al., Molecular recognition through the exact placement of functional groups on non-covalent molecularly imprinted polymers.
Journal of Chromatography A, 950, (1-2), 89-97, (2002)
   

imprinting

Masci G et al., Uniform-sized clenbuterol molecularly imprinted polymers prepared with methacrylic acid or acrylamide as an interacting monomer.
Journal of Applied Polymer Science, 83, (12), 2660-2668, (2002)
   

imprinting

Matsui J et al., Molecular imprinting in alcohols: utility of a pre-polymer based strategy for synthesizing stereoselective artificial receptor polymers in hydrophilic media.
Analytica Chimica Acta, 466, (1), 11-15, (2002)
   

imprinting

Miller KA et al., Measurement of the pKa Values of pH Indicators in Solutions and Sol-Gel Matrix.
Journal of Undergraduate Research, 2, 94-94, (2002)
   

imprinting

Proceeding, Minoura N et al, Syntheses and properties of temperature-responsive polymer gels with protein recognition sites by using the molecular imprinting technique, 
In: Polymer Preprints, Japan, 
1706, (2002)
   

imprinting

Proceeding, Miyata T, Design of stimuli-responsive gels and their applications, 
In: Polymer Preprints, Japan, 
668, (2002)
   

imprinting

Mukawa T et al., Post-oxidative conversion of thiol residue to sulfonic acid in the binding sites of molecularly imprinted polymers: Disulfide based covalent molecular imprinting for basic compounds.
Analyst, 127, (11), 1407-1409, (2002)
   

imprinting

Nicholls IA et al., Molecular imprinting of surfaces.
Bioseparation, 10, (6), 301-305, (2002)
   

imprinting

Proceeding, Ohta M et al, Recognition characteristics and fabrications of molecular imprint sites for bisphenol A targets by using photografting template polymerization, 
In: Polymer Preprints, Japan, 
1670, (2002)
   

imprinting

Oral E et al., Molecular imprinting with small molecules: Effects on polymerization and imprinted properties.
Abstracts of Papers of the American Chemical Society, 224, (OLY), 528-528, (2002)
   

imprinting

Peppas NA et al., Polymers and gels as molecular recognition agents.
Pharmaceutical Research, 19, (5), 578-587, (2002)
   

imprinting

Piletsky SA et al., Electrochemical sensors based on molecularly imprinted polymers.
Electroanalysis, 14, (5), 317-323, (2002)
   

imprinting

Rawls R, Molecular imprinting - Building a better binding site.
Chemical & Engineering News, 80, (30), 9-9, (2002)
   

imprinting

Rückert B et al., Molecularly imprinted composite materials via iniferter-modified supports.
Journal of Materials Chemistry, 12, (8), 2275-2280, (2002)
   

imprinting

Proceeding, Saito K et al, Synthesis of less cross-linked molecularly imprinted polymer catalyst by using the monomers containing peptide structure in side chain, 
In: Polymer Preprints, Japan, 
720, (2002)
   

imprinting

Proceeding, Saito K et al, Less crosslinked molecularly imprinted polymer catalyst prepared from N-acryloylamino acid derivatives, 
In: Polymer Preprints, Japan, 
1721, (2002)
   

imprinting

Proceeding, Satonaka T et al, Synthesis of polymer gel by molecular imprinting method using helical polymethacrylate as template, 
In: Polymer Preprints, Japan, 
1508, (2002)
   

imprinting

Proceeding, Satonaka T et al, Synthesis of polymer gel by molecular imprinting using helical polymethacrylate as template and its chiral recognition ability, 
In: Polymer Preprints, Japan, 
1708, (2002)
   

imprinting

Book chapter, Sawant KRet al., Imprinting of the surface of mesoporous silicates using organic structure directing agents, 
In: Nanoporous Materials III, Sayari A, Jaroniec M (Eds.) 
Elsevier: Amsterdam, 53-60, (2002)    

imprinting

Singh A et al., Horseradish peroxidase-catalysed combinatorial molecular imprinting.
Abstracts of Papers of the American Chemical Society, 223, (ORGN), 011-011, (2002)
   

imprinting

Book chapter, Srebnik S, Induced porosity in cross-linked polymer networks: Mean field theory and simulations, 
In: Characterization Of Porous Solids VI, Rodríguez-Reinoso F, McEnaney B, Rouquerol J, Unger KK (Eds.) 
Elsevier: Amsterdam, 43-50, (2002)    

imprinting

Suzuki A et al., Design of catalytic sites at oxide surfaces by metal-complex attaching and molecular imprinting techniques.
Journal of Molecular Catalysis A: Chemical, 182-183, (1), 125-136, (2002)
   

imprinting

Tada M et al., Design, characterization and performance of a molecular imprinting Rh-dimer hydrogenation catalyst on a SiO2 surface.
Physical Chemistry Chemical Physics, 4, (23), 5899-5909, (2002)
   

imprinting

Tada M et al., Performance and kinetic behavior of a new SiO2-attached molecular-imprinting Rh-dimer catalyst in size- and shape-selective hydrogenation of alkenes.
Journal of Catalysis, 211, (2), 496-510, (2002)
   

imprinting

Tada M et al., Novel SiO2-attached molecular-imprinting Rh-monomer catalysts for shape-selective hydrogenation of alkenes; preparation, characterization and performance.
Physical Chemistry Chemical Physics, 4, (18), 4561-4574, (2002)
   

imprinting

Takeuchi T et al., Synthetic receptors prepared by organized assembly of organic molecules.
IEEE Engineering in Medicine and Biology Magazine, 21, (6), 144-150, (2002)
   

imprinting

Proceeding, Takeuchi T et al, Design and synthesis of sensing materials using molecular imprinting techniques, 
In: Polymer Preprints, Japan, 
726, (2002)
   

imprinting

Tovar GEM et al., Molecularly imprinted nanospheres as synthetic affinity material for biotechnical application.
Abstracts of Papers of the American Chemical Society, 224, (COLL), 364-364, (2002)
   

imprinting

Tsunemori H et al., Surface imprinting polymers for the recognition of nucleotides.
Bioseparation, 10, (6), 315-321, (2002)
   

imprinting

Ulbricht M et al., Novel molecularly imprinted polymer (MIP) composite membranes via controlled surface and pore functionalizations.
Desalination, 149, (1-3), 293-295, (2002)
   

imprinting

Proceeding, Uragami T et al, Preparation of biphenol A-responsive hydrogels by molecular imprinting using cyclodextrin as ligand, 
In: Polymer Preprints, Japan, 
1840, (2002)
   

imprinting

Proceeding, Uragami T et al, Preparation of biphenol A-responsive hydrogels by molecular imprinting using cyclodextrin-ligand, 
In: Polymer Preprints, Japan, 
1433, (2002)
   

imprinting

Proceeding, Uragami T et al, Synthesis of glycoprotein-sensitive hydrogels with multi-ligands by biomolecular imprinting and their glycoprotein-responsiveness, 
In: Polymer Preprints, Japan, 
1841, (2002)
   

imprinting

Vaihinger D et al., Molecularly imprinted polymer nanospheres as synthetic affinity receptors obtained by miniemulsion polymerisation.
Macromolecular Chemistry And Physics, 203, (13), 1965-1973, (2002)
   

imprinting

Weaver M et al., Proton imprinting via sol-gel captivated pH indicators.
Journal of Undergraduate Research, 2, 97-97, (2002)
   

imprinting

Wei D et al., Improving the enzymatic enantioselective ammonolysis of phenylglycine methyl ester by molecular imprinting of the lipase.
Abstracts of Papers of the American Chemical Society, 224, (ORGN), 021-021, (2002)
   

imprinting

Wulff G et al., Stoichiometric noncovalent interaction in molecular imprinting.
Bioseparation, 10, (6), 257-276, (2002)
   

imprinting

Book chapter, Wulff G, Molecular imprinting - a way to prepare effective mimics of natural antibodies and enzymes, 
In: Nanoporous Materials III, Sayari A, Jaroniec M (Eds.) 
Elsevier: Amsterdam, 35-44, (2002)    

imprinting

Xie JC et al., Affinitive separation and on-line identification of antitumor components from Peganum nigellastrum by coupling a chromatographic column of target analogue imprinted polymer with mass spectrometry.
Analytical Chemistry, 74, (10), 2352-2360, (2002)
   

imprinting

Proceeding, Yamashita K et al, Preparation of imprinting hydrogel adsorbents, 
In: Polymer Preprints, Japan, 
1842, (2002)
   

imprinting

Proceeding, Yamashita K et al, Dependence of gel structure on the molecular recognition ability of stimuli-responsive imprinting hydrogel, 
In: Polymer Preprints, Japan, 
1843, (2002)
   

imprinting

Proceeding, Yamashita K et al, Attempts to imprinting of hydrogel in aqueous system, 
In: Polymer Preprints, Japan, 
684, (2002)
   

imprinting

Yan MD, Molecularly imprinted polymers as antibody mimics: Applications in immunoassays and recent developments.
Journal of Clinical Ligand Assay, 25, (2), 234-236, (2002)
   

imprinting

Proceeding, Yang DH et al, Molecular imprinting of cholesterols onto ultrathin films TiO2-gel containing b-cyclodextrin, 
In: Polymer Preprints, Japan, 
1564, (2002)
   

imprinting

Yilmaz E, Improving the application of microbial lipase by bio-imprinting at substrate-interfaces.
World Journal Of Microbiology & Biotechnology, 18, (1), 37-40, (2002)
   

imprinting

Yoshikawa M, Molecularly imprinted polymeric membranes.
Bioseparation, 10, (6), 277-286, (2002)
   

imprinting

Proceeding, Yoshikawa M et al, Chiral recognition ability of oligopeptide derivatives consisiting of glutamyl residues, 
In: Polymer Preprints, Japan, 
625, (2002)
   

imprinting

Yu YH et al., Removal of the fermentation by-product succinyl L-tyrosine from the b-lactamase inhibitor clavulanic acid using a molecularly imprinted polymer.
Biotechnology and Bioengineering, 79, (1), 23-28, (2002)
   

imprinting

Zayats M et al., Imprinting of specific molecular recognition sites in inorganic and organic thin layer membranes associated with ion-sensitive field-effect transistors.
Tetrahedron, 58, (4), 815-824, (2002)
   

imprinting

Zeng YN et al., Cyclic voltammetry characterization of metal complex imprinted polymer.
Journal of Molecular Recognition, 15, (4), 204-208, (2002)
   

imprinting

Zeng YN et al., Preparation and cyclic voltammetry characterization of Cu-dipyridyl imprinted polymer.
Chinese Chemical Letters, 13, (4), 317-320, (2002)
   

imprinting

Zhang TL et al., Molecular recognition properties of salicylic acid-imprinted polymers.
Chromatographia, 55, (7-8), 447-451, (2002)
   

imprinting

Zhang ZT et al., Fabrication of organic-inorganic nanocomposites via molecular imprinting on layered silicate.
Abstracts of Papers of the American Chemical Society, 223, (INOR), 054-054, (2002)
   

imprinting

Zheng N et al., Sulfonamide imprinted polymers using co-functional monomers.
Analytica Chimica Acta, 452, (2), 277-283, (2002)
   

imprinting

Book chapter, Albano DRBet al., Piezoelectric quartz crystal sensor for sodium dodecylsulfate (SDS) based on molecularly imprinted polypyrrole, 
In: Sensors: Asiasense 2003 - Asian Conference On Sensors, Ahmad M, Heng LY, Salimon J, Ghodgaonkar DK, Yousof RW, Surif S, Taib MN (Eds.) 
IEEE: New York, 117-120, (2003)    

imprinting

Allais F et al., ROMP versus radical polymerization in molecular imprinting.
Abstracts of Papers of the American Chemical Society, 225, (CHED), 103-103, (2003)
   

imprinting

Bass JD et al., The effect of outer-sphere acidity on chemical reactivity in a synthetic heterogeneous base catalyst.
Angewandte Chemie International Edition, 42, (42), 5219-5222, (2003)
   

imprinting

Batra D et al., Combinatorial methods in molecular imprinting.
Current Opinion in Chemical Biology, 7, (3), 434-442, (2003)
   

imprinting

Becker JJ et al., Imprinting chiral information into rigidified dendrimers.
Organometallics, 22, (24), 4984-4998, (2003)
   

imprinting

Biju VM et al., Effect of g-irradiation of ion imprinted polymer (IIP) particles for the preconcentrative separation of dysprosium from other selected lanthanides.
Talanta, 60, (4), 747-754, (2003)
   

imprinting

Conrad PGI et al., Functional molecularly imprinted polymer microstructures fabricated using microstereolithography.
Advanced Materials, 15, (18), 1541-1544, (2003)
   

imprinting

Dagani R, Imprinting a film with chirality.
Chemical & Engineering News, 81, (40), 12-12, (2003)
   

imprinting

Daniel S et al., Synthesis of imprinted polymer material with palladium ion nanopores and its analytical application.
Analytica Chimica Acta, 488, (2), 173-182, (2003)
   

imprinting

Das K et al., Selective picomolar detection of hexachlorobenzene in water using a quartz crystal microbalance coated with a molecularly imprinted polymer thin film.
Langmuir, 19, (9), 3921-3925, (2003)
   

imprinting

Davidson L et al., Synthesis and evaluation of a solid supported molecular tweezer type receptor for cholesterol.
Journal of Materials Chemistry, 13, (4), 758-766, (2003)
   

imprinting

Davis ME, Reflections on routes to enantioselective solid catalysts.
Topics In Catalysis, 25, (1-4), 3-7, (2003)
   

imprinting

Deore B et al., Saccharide imprinting of poly(aniline boronic acid) in the presence of fluoride.
Analyst, 128, (6), 803-806, (2003)
   

imprinting

Dickert F et al., Borderline applications of QCM-devices: synthetic antibodies for analytes in both nm- and mm-dimensions.
Sensors and Actuators B: Chemical, 95, (1-3), 20-24, (2003)
   

imprinting

Dickert FL et al., Sensor strategies for microorganism detection - from physical principles to imprinting procedures.
Analytical and Bioanalytical Chemistry, 377, (3), 540-549, (2003)
   

imprinting

Dickert FL et al., Chemical sensors through molecular imprinting.
Nachrichten aus der Chemie, 51, (11), 1139-1143, (2003)
   

imprinting

Dickert FL et al., Nano- and micro-structuring of sensor materials - from molecule to cell detection.
Synthetic Metals, 138, (1-2), 65-69, (2003)
   

imprinting

Proceeding, Dickert FL et al, Selfassembling around templates - Creating nano dots and pits for chemical sensing, 
Velev OD, Bunning TJ, Xia Y, Yang P (Eds.), 
37-42, (2003)
   

imprinting

Emgenbroich M et al., A new enzyme model for enantioselective esterases based on molecularly imprinted polymers.
Chemistry - A European Journal, 9, (17), 4106-4117, (2003)
   

imprinting

Feng RT et al., Review on enzyme mimics.
Chinese Journal of Organic Chemistry, 23, (8), 893-899, (2003)
   

imprinting

Fireman-Shoresh S et al., General method for chiral imprinting of sol-gel thin films exhibiting enantioselectivity.
Chemistry of Materials, 15, (19), 3607-3613, (2003)
   

imprinting

Fujiwara I et al., Preparation of ferrocyanide-imprinted pyridine-carrying microspheres by surface imprinting polymerization.
Analytical Sciences, 19, (4), 617-620, (2003)
   

imprinting

Gong JL et al., A novel electrosynthesized polymer applied to molecular imprinting technology.
Talanta, 61, (4), 447-453, (2003)
   

imprinting

Grosu S et al., Molecular imprinting of antibiotic films for electroanalysis of the dopamine/ascorbate system.
Indian Journal of Chemistry Section A-Inorganic Bio-Inorganic Physical Theoretical & Analytical Chemistry, 42, (4), 758-763, (2003)
   

imprinting

Güney O, Multiple-point adsorption of terbium ions by lead ion templated thermosensitive gel: elucidating recognition of conformation in gel by terbium probe.
Journal of Molecular Recognition, 16, (2), 67-71, (2003)
   

imprinting

Hayden O et al., Combining atomic force microscope and quartz crystal microbalance studies for cell detection.
Measurement Science & Technology, 14, (11), 1876-1881, (2003)
   

imprinting

Hayden O et al., Mass-sensitive detection of cells, viruses and enzymes with artificial receptors.
Sensors and Actuators B: Chemical, 91, (1-3), 316-319, (2003)
   

imprinting

Horvath JD et al., Naturally chiral surfaces.
Topics In Catalysis, 25, (1-4), 9-15, (2003)
   

imprinting

Ito K et al., Multiple point adsorption in a heteropolymer gel and the Tanaka approach to imprinting: experiment and theory.
Progress in Polymer Science, 28, (10), 1489-1515, (2003)
   

imprinting

Kapnissi-Christodoulou CP et al., Analytical separations in open-tubular capillary electrochromatography.
Electrophoresis, 24, (22-23), 3917-3934, (2003)
   

imprinting

Kawakami K et al., Enhancement of protease activity in transesterification of glycidol with vinyl n-butyrate by entrapment into alkyl-substituted silicates and pretreatment with a substrate.
Biocatalysis and Biotransformation, 21, (1), 49-52, (2003)
   

imprinting

Kempe M, Studies on the cross-reactivity of synthetic oxytocin receptors prepared by molecular imprinting.
Biopolymers, 71, (3), 383-383, (2003)
   

imprinting

Book chapter, Kobayashi Tet al., Molecularly imprinted membranes having amphiphilic scaffold media for target molecule recognition, 
In: Membranes-Preparation, Properties and Applications, Burganos VN, Noble RD, Asaeda M, Ayral A, Le Roux JD (Eds.) 
Materials Research Society: Warrendale, 39-43, (2003)    

imprinting

Kondo Y et al., Effect of constituting amino acid residue numbers on molecularly imprinted chiral recognition sites.
Chirality, 15, (6), 498-503, (2003)
   

imprinting

Kostrewa S et al., Surface-enhanced Raman scattering on molecularly imprinted polymers in water.
Macromolecular Chemistry And Physics, 204, (3), 481-487, (2003)
   

imprinting

Kubo T et al., On-column concentration of bisphenol A with one-step removal of humic acids in water.
Journal of Chromatography A, 987, (1-2), 389-394, (2003)
   

imprinting

Kunitake T, Nano-architectures derived from imprinting and templating of ultrathin metal oxide layers.
Abstracts of Papers of the American Chemical Society, 226, (PMSE), 19-19, (2003)
   

imprinting

Leung MKP et al., Molecular sensing of 3-chloro-1,2-propanediol by molecular imprinting.
Analytica Chimica Acta, 491, (1), 15-25, (2003)
   

imprinting

Li ZJ et al., Synthesis and adsorption properties of colloid-imprinted carbons with surface and volume mesoporosity.
Chemistry of Materials, 15, (6), 1327-1333, (2003)
   

imprinting

Mertz E et al., Kinetics and thermodynamics of amine and diamine signaling by a trifluoroacetyl azobenzene reporter group.
Organic Letters, 5, (17), 3127-3130, (2003)
   

imprinting

Molochnikov LS et al., Coordination of Cu(II) and Ni(II) in polymers imprinted so as to optimize amine chelate formation.
Polymer, 44, (17), 4805-4815, (2003)
   

imprinting

Mukawa T et al., Novel strategy for molecular imprinting of phenolic compounds utilizing disulfide templates.
Journal of Pharmaceutical and Biomedical Analysis, 30, (6), 1943-1947, (2003)
   

imprinting

Book chapter, Noyes KLet al., Synthesis and evaluation of resins for actinide separations, 
In: Scientific Basis For Nuclear Waste Management XXVI, Finch RJ, Bullen DB (Eds.) 
Materials Research Society: Warrendale, 635-640, (2003)    

imprinting

Parker JL et al., Development of a sensor for the hydrolysis product of the nerve agent Soman utilizing molecular imprinting and silica sol-gel techniques.
Abstracts of Papers of the American Chemical Society, 225, (PMSE), 198-198, (2003)
   

imprinting

Ramamoorthy M et al., Molecular imprinting of cellulose acetate-sulfonated polysulfone blend membranes for Rhodamine B by phase inversion technique.
Journal of Membrane Science, 217, (1-2), 207-214, (2003)
   

imprinting

Say R et al., Preconcentration of copper on ion-selective imprinted polymer microbeads.
Analytica Chimica Acta, 480, (2), 251-258, (2003)
   

imprinting

Schmiesing CS et al., Electrochemically assisted solid phase micro-extraction using L-dopa imprinted conducting polymer electrode fibers: Structural aspects.
Abstracts of Papers of the American Chemical Society, 225, (ANYL), 098-098, (2003)
   

imprinting

Seong H et al., Preparation of liposomes with glucose binding sites: liposomes containing di-branched amino acid derivatives.
Biomaterials, 24, (24), 4487-4493, (2003)
   

imprinting

Book chapter, Sevilla F, Chemical sensors based on conducting polymers, 
In: Sensors: Asiasense 2003 - Asian Conference On Sensors, Ahmad M, Heng LY, Salimon J, Ghodgaonkar DK, Yousof RW, Surif S, Taib MN (Eds.) 
IEEE: New York, 87-92, (2003)    

imprinting

Shea KJ, Recent developments in molecular imprinting.
Abstracts of Papers of the American Chemical Society, 225, (POLY), 709-709, (2003)
   

imprinting

Shepherd RE, Chromatographic and related electrophoretic methods in the separation of transition metal complexes or their ligands.
Coordination Chemistry Reviews, 247, (1-2), 147-184, (2003)
   

imprinting

Shiigi H et al., Molecularly imprinted overoxidized polypyrrole colloids: Promising materials for molecular recognition.
Microchimica Acta, 143, (2-3), 155-162, (2003)
   

imprinting

Shimizu KD, Understanding the fundamental recognition behavior of molecularly imprinted polymers.
Abstracts of Papers of the American Chemical Society, 226, (POLY), 519-519, (2003)
   

imprinting

Shustak G et al., Application of sol-gel technology for electroanalytical sensing.
Electroanalysis, 15, (5-6), 398-408, (2003)
   

imprinting

Sibrian-Vazquez M et al., Synthesis and characterization of a novel L-serine based crosslinking monomer for molecular imprinting.
Abstracts of Papers of the American Chemical Society, 225, (ORGN), 90-90, (2003)
   

imprinting

Sobhi DJ et al., Synthesis of imprinted polymer material with palladium ion nanopores and its analytical application.
Analytica Chimica Acta, 488, (2), 173-182, (2003)
   

imprinting

Strikovsky A et al., Catalytically active, molecularly imprinted polymers in bead form.
Reactive and Functional Polymers, 54, (1-3), 49-61, (2003)
   

imprinting

Su HJ et al., Adsorption of Ni2+ on the surface of molecularly imprinted adsorbent from Penicillium chysogenum mycelium.
Biotechnology Letters, 25, (12), 949-953, (2003)
   

imprinting

Tada M et al., Design of molecular-imprinting metal-complex catalysts.
Journal of Molecular Catalysis A: Chemical, 199, (1-2), 115-137, (2003)
   

imprinting

Tada M et al., Approaches to design of active structures by attaching and molecular imprinting of metal complexes on oxide surfaces.
Journal of Molecular Catalysis A: Chemical, 204-205, (1), 27-53, (2003)
   

imprinting

Taniwaki K et al., Evaluation of the recognition ability of molecularly imprinted materials by surface plasmon resonance (SPR) spectroscopy.
Analytica Chimica Acta, 489, (2), 191-198, (2003)
   

imprinting

Titirici MM et al., Hierarchical imprinting using crude solid phase peptide synthesis products as templates.
Chemistry of Materials, 15, (4), 822-824, (2003)
   

imprinting

Toorisaka E et al., A molecularly imprinted polymer that shows enzymatic activity.
Biochemical Engineering Journal, 14, (2), 85-91, (2003)
   

imprinting

Book chapter, Tovar GEMet al., Molecularly imprinted polymer nanospheres as fully synthetic affinity receptors, 
In: Colloid Chemistry II, Antonietti M (Ed.) 
Springer-Verlag: Heidelberg, 125-144, (2003)    

imprinting

Viton F et al., Crown-ether functionalised second coordination sphere palladium catalysts by molecular imprinting.
Chemical Communications, (24), 3040-3041, (2003)
   

imprinting

Wandelt B et al., Steady-state and time-resolved fluorescence studies of fluorescent imprinted polymers.
Journal of Luminescence, 102-103, (1), 774-781, (2003)
   

imprinting

Wang JF et al., Monodisperse, molecularly imprinted polymer microspheres prepared by precipitation polymerization for affinity separation applications.
Angewandte Chemie International Edition, 42, (43), 5336-5338, (2003)
   

imprinting

Wu LQ et al., Picolinamide-Cu(Ac)2-imprinted polymer with high potential for recognition of picolinamide-copper acetate complex.
Analytica Chimica Acta, 482, (2), 175-181, (2003)
   

imprinting

Wu LQ et al., Study properties of molecular imprinting polymer using a computational approach.
Analyst, 128, (7), 944-949, (2003)
   

imprinting

Yan WY et al., Capillary electrochromatographic separation of ionizable compounds with a molecular imprinted monolithic cationic exchange column.
Journal of Separation Science, 26, (6-7), 555-561, (2003)
   

imprinting

Book chapter, Yang RTet al., Silica gel, MCM, and activated alumina, 
In: Adsorbents: Fundamentals and Applications, Yang RT (Ed.) 
John Wiley & Sons, Inc.: New York, 131-156, (2003)    

imprinting

Yilmaz E, Orlistat-induced molecular bio-imprinting of microbial lipase.
World Journal Of Microbiology & Biotechnology, 19, (2), 161-165, (2003)
   

imprinting

Yoshikawa M et al., Chiral recognition sites converted from tetrapeptide derivatives adopting racemates as print molecules.
Macromolecular Bioscience, 3, (9), 487-498, (2003)
   

imprinting

Zhang ZT et al., Intersurface ion-imprinting synthesis on layered magadiite hosts.
Chemistry of Materials, 15, (15), 2921-2925, (2003)
   

imprinting

Zhou YX et al., Potentiometric sensing of chiral amino acids.
Chemistry of Materials, 15, (14), 2774-2779, (2003)
   

imprinting

Zhou YX et al., Chiral surface imprinting: Integrated recognition and transduction.
Abstracts of Papers of the American Chemical Society, 225, (ANYL), 132-132, (2003)
   

imprinting

Zhou YX et al., Chiral surface imprinting: Integrated recognition and transduction.
Abstracts of Papers of the American Chemical Society, 225, (COLL), 495-495, (2003)
   

imprinting

Zimmerman SC et al., Monomolecular imprinting: Synthetic hosts via molecular imprinting inside of dendrimers.
Abstracts of Papers of the American Chemical Society, 226, (POLY), 479-479, (2003)
   

imprinting

Zimmerman SC, Synthetic hosts by molecular imprinting inside dendrimers.
Abstracts of Papers of the American Chemical Society, 226, (ORGN), 254-254, (2003)
   

imprinting

Zuo XB et al., Molecularly imprinted polymers for the specific rebinding of macrocyclic metal complexes via non-covalent interactions.
Abstracts of Papers of the American Chemical Society, 225, (NUCL), 26-26, (2003)
   

imprinting

Aït-Haddou H et al., Amino-acid containing metallomonomers copolymerized into porous organic polymers: applicability to allylic alkylation catalysis.
Inorganica Chimica Acta, 357, (13), 3854-3864, (2004)
   

imprinting

Asanuma H et al., Efficient separation of hydrophobic molecules by molecularly imprinted cyclodextrin polymers.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 50, (1-2), 51-55, (2004)
   

imprinting

Baggiani C et al., Binding properties of 2,4,5-trichlorophenoxyacetic acid-imprinted polymers prepared with different molar ratios between template and functional monomer.
Talanta, 62, (5), 1029-1034, (2004)
   

imprinting

Baggiani C et al., Adsorption isotherms of a molecular imprinted polymer prepared in the presence of a polymerisable template - Indirect evidence of the formation of template clusters in the binding site.
Analytica Chimica Acta, 504, (1), 43-52, (2004)
   

imprinting

Becker JJ et al., Exploiting the synergy between coordination chemistry and molecular imprinting in the quest for new catalysts.
Accounts of Chemical Research, 37, (10), 798-804, (2004)
   

imprinting

Busi E et al., An innovative approach to the design of plastic antibodies: molecular imprinting via a non-polar transition state analogue.
Journal of Molecular Catalysis A: Chemical, 217, (1-2), 31-36, (2004)
   

imprinting

Cai LS et al., Molecularly imprinted polymer for theophylline retention and molecular recognition properties in capillary electrochromatography.
Wuhan University Journal of Natural Sciences, 9, (3), 359-365, (2004)
   

imprinting

Caro E et al., Molecularly imprinted solid-phase extraction of naphthalene sulfonates from water.
Journal of Chromatography A, 1047, (2), 175-180, (2004)
   

imprinting

Caro E et al., A new molecularly imprinted polymer for the selective extraction of naproxen from urine samples by solid-phase extraction.
Journal of Chromatography B, 813, (1-2), 137-143, (2004)
   

imprinting

Chmurski K et al., Measurement of ibuprofen binding to mixed monolayers containing b-cyclodextrin active sites.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 49, (1-2), 187-191, (2004)
   

imprinting

Cormack PAG et al., Molecularly imprinted polymers: synthesis and characterisation.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 173-182, (2004)
   

imprinting

Cristallini C et al., Acrylonitrile-acrylic acid copolymer membrane imprinted with uric acid for clinical uses.
Macromolecular Bioscience, 4, (1), 31-38, (2004)
   

imprinting

Davies MP et al., Approaches to the rational design of molecularly imprinted polymers.
Analytica Chimica Acta, 504, (1), 7-14, (2004)
   

imprinting

Dickert FL et al., Synthetic receptors for chemical sensors - subnano- and micrometre patterning by imprinting techniques.
Biosensors and Bioelectronics, 20, (6), 1040-1044, (2004)
   

imprinting

Dickert FL et al., Modifying polymers by self-organisation for the mass-sensitive detection of environmental and biogeneous analytes.
Sensors and Actuators B: Chemical, 100, (1-2), 112-116, (2004)
   

imprinting

Dickert FL et al., Bioimprinted QCM sensors for virus detection - screening of plant sap.
Analytical and Bioanalytical Chemistry, 378, (8), 1929-1934, (2004)
   

imprinting

Book chapter, Dickert FLet al., Molecular imprinting - a universal strategy for the development of chemosensors, 
In: Sensors And Measuring Systems 2004, 
611-615, (2004)    

imprinting

Ebarvia BS et al., Biomimetic piezoelectric quartz sensor for caffeine based on a molecularly imprinted polymer.
Analytical and Bioanalytical Chemistry, 378, (5), 1331-1337, (2004)
   

imprinting

El-Toufaili FA et al., Screening combinatorial libraries of molecularly imprinted polymer films casted on membranes in single-use membrane modules.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 135-139, (2004)
   

imprinting

Ersöz A et al., Removal of phenolic compounds with nitrophenol-imprinted polymer based on p-p and hydrogen-bonding interactions.
Separation and Purification Technology, 38, (2), 173-179, (2004)
   

imprinting

Fairhurst RE et al., A direct comparison of the performance of ground, beaded and silica-grafted MIPs in HPLC and turbulent flow chromatography applications.
Biosensors and Bioelectronics, 20, (6), 1098-1105, (2004)
   

imprinting

Feng L et al., Biosensor for the determination of sorbitol based on molecularly imprinted electro synthesized polymers.
Biosensors and Bioelectronics, 19, (11), 1513-1519, (2004)
   

imprinting

Feng LA et al., Molecularly imprinted TiO2 thin film by liquid phase deposition for the determination of L-glutamic acid.
Langmuir, 20, (5), 1786-1790, (2004)
   

imprinting

Gong SL et al., Dye-molecular-imprinted polysiloxanes. II. Preparation, characterization, and recognition behavior.
Journal of Applied Polymer Science, 93, (2), 637-643, (2004)
   

imprinting

Gore MA et al., Enhanced capacities and selectivities for cholesterol in aqueous media by molecular imprinting: role of novel cross-linkers.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 211-221, (2004)
   

imprinting

Guo TY et al., Chemically modified chitosan beads as molecularly imprinted polymer matrix for adsorptive separation of proteins.
Chinese Chemical Letters, 15, (11), 1339-1341, (2004)
   

imprinting

Habaue S et al., Synthesis of polymer gel with chiral helical cavity by molecular imprinting using bifunctional vinyl monomers.
Polymer, 45, (15), 5095-5100, (2004)
   

imprinting

Hedin-Dahlström J et al., Stereoselective reduction of menthone by molecularly imprinted polymers.
Tetrahedron: Asymmetry, 15, (15), 2431-2436, (2004)
   

imprinting

Hickman SA et al., Liquid crystal imprinting: a method for preparing ordered organic monolayers with a sacrificial liquid crystal template.
Abstracts of Papers of the American Chemical Society, 227, (CHED), 569-569, (2004)
   

imprinting

Hilt JZ et al., Configurational biomimesis in drug delivery: molecular imprinting of biologically significant molecules.
Advanced Drug Delivery Reviews, 56, (11), 1599-1620, (2004)
   

imprinting

Hiratani H et al., The nature of backbone monomers determines the performance of imprinted soft contact lenses as timolol drug delivery systems.
Biomaterials, 25, (6), 1105-1113, (2004)
   

imprinting

Huan SY et al., Determination of heavy metal ions in mixed solution by imprinted SAMs.
Electrochimica Acta, 49, (25), 4273-4280, (2004)
   

imprinting

Huan SY et al., Selective electrochemical molecular recognition of benzenediol isomers using molecularly imprinted TiO2 film electrodes.
Analytica Chimica Acta, 506, (1), 31-39, (2004)
   

imprinting

Huang HC et al., Photo-lithographically impregnated and molecularly imprinted polymer thin film for biosensor applications.
Journal of Chromatography A, 1027, (1-2), 263-268, (2004)
   

imprinting

Huang JT et al., Molecularly imprinting of polymeric nucleophilic catalysts containing 4-alkylaminopyridine functions.
Polymer, 45, (12), 4349-4354, (2004)
   

imprinting

Ikegami T et al., Synthetic polymers adsorbing bisphenol A and its analogues prepared by covalent molecular imprinting using bisphenol A dimethacrylate as a template molecule.
Analytical and Bioanalytical Chemistry, 378, (8), 1898-1902, (2004)
   

imprinting

Ikegami T et al., Covalent molecular imprinting of bisphenol A using its diesters followed by the reductive cleavage with LiAlH4.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 197-201, (2004)
   

imprinting

Ikegami T et al., Bisphenol A-recognition polymers prepared by covalent molecular imprinting.
Analytica Chimica Acta, 504, (1), 131-135, (2004)
   

imprinting

Jin Y et al., Separation characteristics of mixed-template imprinted polymer.
Korean Chemical Engineering Research, 42, (4), 413-419, (2004)
   

imprinting

Kim Y et al., Advances in environmental technologies via the application of mesoporous materials.
Journal of Industrial and Engineering Chemistry, 10, (1), 41-51, (2004)
   

imprinting

Kindschy LM et al., A review of molecularly imprinted polymers for biosensor development for food and agricultural applications.
Transactions of the ASAE, 47, (4), 1375-1382, (2004)
   

imprinting

Kist TBL et al., Separation of biomolecules using electrophoresis and nanostructures.
Electrophoresis, 25, (21-22), 3492-3497, (2004)
   

imprinting

Book chapter, Komiyama Met al., Introduction, 
In: Molecular Imprinting, Komiyama M, Takeuchi T, Mukawa T, Asanuma H (Eds.) 
Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, 1-8, (2004)    

imprinting

Book chapter, Komiyama Met al., Experimental Methods (2) - Evaluation of Imprinting Efficiency, 
In: Molecular Imprinting, Komiyama M, Takeuchi T, Mukawa T, Asanuma H (Eds.) 
Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, 47-52, (2004)    

imprinting

Book chapter, Komiyama Met al., Applications of Molecularly Imprinted Polymers, 
In: Molecular Imprinting, Komiyama M, Takeuchi T, Mukawa T, Asanuma H (Eds.) 
Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, 75-118, (2004)    

imprinting

Book chapter, Komiyama Met al., Recent Challenges and Progress, 
In: Molecular Imprinting, Komiyama M, Takeuchi T, Mukawa T, Asanuma H (Eds.) 
Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, 119-139, (2004)    

imprinting

Book chapter, Komiyama Met al., Flow Chart of a Typical Molecular Imprinting, 
In: Molecular Imprinting, Komiyama M, Takeuchi T, Mukawa T, Asanuma H (Eds.) 
Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, 65-73, (2004)    

imprinting

Book chapter, Komiyama Met al., Conclusions and Prospects, 
In: Molecular Imprinting, Komiyama M, Takeuchi T, Mukawa T, Asanuma H (Eds.) 
Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, 141, (2004)    

imprinting

Book chapter, Komiyama Met al., Experimental Methods (1) - Procedures of Molecular Imprinting, 
In: Molecular Imprinting, Komiyama M, Takeuchi T, Mukawa T, Asanuma H (Eds.) 
Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, 21-45, (2004)    

imprinting

Book chapter, Komiyama Met al., Spectroscopic Anatomy of Molecular Imprinting Reactions, 
In: Molecular Imprinting, Komiyama M, Takeuchi T, Mukawa T, Asanuma H (Eds.) 
Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, 53-64, (2004)    

imprinting

Kornysova O et al., A simplified synthesis of polymeric nonparticulate stationary phases with macrocyclic antibiotic as chiral selector for capillary electrochromatography.
Electrophoresis, 25, (16), 2825-2829, (2004)
   

imprinting

Kubo T et al., Recognition of hepatotoxic homologues of Microcystin using a combination of selective adsorption media.
Journal of Separation Science, 27, (4), 316-324, (2004)
   

imprinting

Kubo T et al., Polymer-based adsorption medium prepared using a fragment imprinting technique for homologues of chlorinated bisphenol A produced in the environment.
Journal of Chromatography A, 1029, (1-2), 37-41, (2004)
   

imprinting

Kubo T et al., Toxicity recognition of hepatotoxin, homologues of microcystin with artificial trapping devices.
Journal of Environmental Science and Health Part A-Toxic/Hazardous Substances & Environmental Engineering, 39, (10), 2597-2614, (2004)
   

imprinting

Kunitake T et al., Molecular imprinting in ultrathin titania gel films via surface sol-gel process.
Analytica Chimica Acta, 504, (1), 1-6, (2004)
   

imprinting

Lai JP et al., Benzo[a]pyrene imprinted polymers: synthesis, characterization and SPE application in water and coffee samples.
Analytica Chimica Acta, 522, (2), 137-144, (2004)
   

imprinting

Lai JP et al., Separation and determination of astaxanthin from microalgal and yeast samples by molecularly imprinted microspheres.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 25-30, (2004)
   

imprinting

Lanza F et al., Molecularly imprinted polymers via high-throughput and combinatorial techniques.
Macromolecular Rapid Communications, 25, (1), 59-68, (2004)
   

imprinting

Li ZJ et al., Mesoporous carbons synthesized by imprinting ordered and disordered porous structures of silica particles in mesophase pitch.
Journal of Physical Chemistry B, 108, (3), 824-826, (2004)
   

imprinting

Liao HP et al., Preparation of the molecularly imprinted polymers-based capacitive sensor specific for tegafur and its characterization by electrochemical impedance and piezoelectric quartz crystal microbalance.
Electrochimica Acta, 49, (24), 4101-4107, (2004)
   

imprinting

Book chapter, Lieberzeit PAet al., Nanostructured functional polymers for engine oil quality sensors, 
In: Proceedings Of The IEEE Sensors 2004, Rocha D, Sarro PM, Vellekoop MJ (Eds.) 
IEEE: New York, 449-450, (2004)    

imprinting

Lieberzeit PA et al., From nanopatterning to functionality - surface and bulk imprinting for analytical purposes.
Supperlattices and Microstructures, 36, (1-3), 133-142, (2004)
   

imprinting

Lin TY et al., Determination of albumin concentration by MIP-QCM sensor.
Biosensors and Bioelectronics, 20, (1), 75-81, (2004)
   

imprinting

Lisichkin GV et al., Chemically modified oxide surfaces capable of molecular recognition.
Colloid Journal, 66, (4), 387-399, (2004)
   

imprinting

Liu ZS et al., Chiral separation of binaphthol enantiomers on molecularly imprinted polymer monolith by capillary electrochromatography.
Analytical Sciences, 20, (4), 673-678, (2004)
   

imprinting

Liu ZS et al., Preparation and characterization of molecularly imprinted monolithic column based on 4-hydroxybenzoic acid for the molecular recognition in capillary electrochromatography.
Analytica Chimica Acta, 523, (2), 243-250, (2004)
   

imprinting

Maier P et al., Scanning force microscopy study of the morphology of spin-cast molecular-imprinted nylon thin films.
Surface And Interface Analysis, 36, (9), 1340-1343, (2004)
   

imprinting

Malaisamy R et al., Evaluation of molecularly imprinted polymer blend filtration membranes under solid phase extraction conditions.
Separation and Purification Technology, 39, (3), 211-219, (2004)
   

imprinting

Manesiotis P et al., An enantioselective imprinted receptor for Z-glutamate exhibiting a binding induced color change.
Chemical Communications, (20), 2278-2279, (2004)
   

imprinting

Martin-Esteban A, Molecular imprinting technology: a simple way of synthesizing biomimetic polymeric receptors.
Analytical and Bioanalytical Chemistry, 378, (8), 1875-1875, (2004)
   

imprinting

Marty JD et al., Liquid crystalline networks: Potential uses in molecular imprinting technique.
Molecular Crystals And Liquid Crystals, 411, 561-568, (2004)
   

imprinting

Matsui J et al., Synthetic cinchonidine receptors obtained by cross-linking linear poly(methacrylic acid) derivatives as an alternative molecular imprinting technique.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 223-229, (2004)
   

imprinting

Mertz E et al., Integrating chemosensors for amine-containing compounds into cross-linked dendritic hosts.
Tetrahedron, 60, (49), 11191-11204, (2004)
   

imprinting

Motherwell WB et al., A study of some molecularly imprinted polymers as protic catalysts for the isomerisation of a-pinene oxide to trans-carveol.
Tetrahedron, 60, (14), 3231-3241, (2004)
   

imprinting

Nilsson J et al., Molecularly imprinted polymer formats for capillary electrochromatography.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 3-12, (2004)
   

imprinting

Nishikawa T et al., Nano imprinting of a protein assembly on metal surface.
Biophysical Journal, 86, (1), 161A-161A, (2004)
   

imprinting

Oral E et al., Dynamic studies of molecular imprinting polymerizations.
Polymer, 45, (18), 6163-6173, (2004)
   

imprinting

Oral E et al., Responsive and recognitive hydrogels using star polymers.
Journal of Biomedical Materials Research Part A, 68A, (3), 439-447, (2004)
   

imprinting

Ou SH et al., Polyacrylamide gels with electrostatic functional groups for the molecular imprinting of lysozyme.
Analytica Chimica Acta, 504, (1), 163-166, (2004)
   

imprinting

Patel A et al., Novel stereoselective molecularly imprinted polymers via ring-opening metathesis polymerisation.
Analytica Chimica Acta, 504, (1), 53-62, (2004)
   

imprinting

Pestov D et al., Molecular imprinting using monomers with solid-state polymerization.
Analytica Chimica Acta, 504, (1), 31-35, (2004)
   

imprinting

Pérez-Moral N et al., Noncovalent imprinting in the shell of core-shell nanoparticles.
Langmuir, 20, (9), 3775-3779, (2004)
   

imprinting

Piletska E et al., Biotin-specific synthetic receptors prepared using molecular imprinting.
Analytica Chimica Acta, 504, (1), 179-183, (2004)
   

imprinting

Pogorelova SP et al., Development of ion-sensitive field-effect transistor-based sensors for benzylphosphonic acids and thiophenols using molecularly imprinted TiO2 films.
Analytica Chimica Acta, 504, (1), 113-122, (2004)
   

imprinting

Puri BK et al., A new polymeric adsorbent for screening and pre-concentration of organotin compounds in sediments and seawater samples.
Spectrochimica Acta Part B-Atomic Spectroscopy, 59, (2), 209-214, (2004)
   

imprinting

Quaglia M et al., Approaches to imprinted stationary phases for affinity capillary electrochromatography.
Journal of Chromatography A, 1044, (1-2), 53-66, (2004)
   

imprinting

Book chapter, Roberts MJet al., Nanorods produced on the surface of thin films of TiOx by surface-imprinting, 
In: Molecularly Imprinted Materials-2003, Kofinas P, Sellergren B, Roberts MJ (Eds.) 
Materials Research Society: Warrendale, 47-51, (2004)    

imprinting

Row KH et al., Manufacture and separation characteristic of MIP.
Korean Chemical Engineering Research, 42, (6), 635-645, (2004)
   

imprinting

Rushton GT et al., Selective byproduct removal via molecular imprinting.
Abstracts of Papers of the American Chemical Society, 227, (POLY), 83-83, (2004)
   

imprinting

Sagawa T et al., Rate-enhancement of hydrolysis of long-chain amino acid ester by cross-linked polymers imprinted with a transition-state analogue: evaluation of imprinting effect in kinetic analysis.
Analytica Chimica Acta, 504, (1), 37-41, (2004)
   

imprinting

Shinkai S et al., Molecular design of synthetic receptors with dynamic, imprinting, and allosteric functions.
Biosensors and Bioelectronics, 20, (6), 1250-1259, (2004)
   

imprinting

Silvestri D et al., Molecularly imprinted bioartificial membranes for the selective recognition of biological molecules.
Journal of Biomaterials Science-Polymer Edition, 15, (3), 255-278, (2004)
   

imprinting

Simon RL et al., Performance analysis of molecularly imprinted polymers for carboxylate and aminophosphate templates using commercially available basic functional monomers.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 203-209, (2004)
   

imprinting

Sreenivasan K, Imparting affinity sites for adenosine triphosphate on the surface of polyurethane through molecular imprinting.
Journal of Applied Polymer Science, 94, (5), 2088-2090, (2004)
   

imprinting

Suedee R et al., Use of molecularly imprinted polymers from a mixture of tetracycline and its degradation products to produce affinity membranes for the removal of tetracycline from water.
Journal of Chromatography B, 811, (2), 191-200, (2004)
   

imprinting

Sun RF et al., Construction and application of a stoichiometric displacement model for retention in chiral recognition of molecular imprinting.
Journal of Chromatography A, 1055, (1-2), 1-9, (2004)
   

imprinting

Tada M et al., Design of a novel molecular-imprinted Rh-amine complex on SiO2 and its shape-selective catalysis for a-methylstyrene hydrogenation.
Journal of Physical Chemistry B, 108, (9), 2918-2930, (2004)
   

imprinting

Takeuchi T et al., Atrazine transformation using synthetic enzymes prepared by molecular imprinting.
Organic & Biomolecular Chemistry, 2, (18), 2563-2566, (2004)
   

imprinting

Takeuchi T et al., Atrazine transformation using synthetic enzymes prepared by molecular imprinting (vol 2, pg 2563, 2004).
Organic & Biomolecular Chemistry, 2, (19), 2884-2884, (2004)
   

imprinting

Uezu K et al., Lanthanoid element recognition on surface-imprinted polymers containing dioleylphosphoric acid as a functional host.
Analytical Sciences, 20, (11), 1593-1597, (2004)
   

imprinting

Ulbricht M, Membrane separations using molecularly imprinted polymers.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 113-125, (2004)
   

imprinting

Umpleby RJ et al., Characterization of the heterogeneous binding site affinity distributions in molecularly imprinted polymers.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 141-149, (2004)
   

imprinting

Proceeding, Uragami T et al, Preparation of glycoprotein-responsive hydrogels by biomolecular imprinting and effect of gel structure on their shrinking behavior, 
In: Polymer Preprints, Japan, 
675, (2004)
   

imprinting

Vaidya A et al., Altering glucose oxidase to oxidize D-galactose through crosslinking of imprinted protein.
ChemBioChem, 5, (1), 132-135, (2004)
   

imprinting

Visnjevski A et al., Catalyzing a cycloaddition with molecularly imprinted polymers obtained via immobilized templates.
Applied Catalysis A: General, 260, (2), 169-174, (2004)
   

imprinting

Wang HY et al., Molecularly imprinted copolymer membranes functionalized by phase inversion imprinting for uracil recognition and permselective binding.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 127-134, (2004)
   

imprinting

Wu LQ et al., Study on the recognition of templates and their analogues on molecularly imprinted polymer using computational and conformational analysis approaches.
Journal of Molecular Recognition, 17, (6), 567-574, (2004)
   

imprinting

Wu LQ et al., Metal ion-mediated molecular-imprinting polymer for indirect recognition of formate, acetate and propionate.
Analytica Chimica Acta, 517, (1-2), 145-151, (2004)
   

imprinting

Xi FN et al., Macroporous chitosan layer coated on non-porous silica gel as a support for metal chelate affinity chromatographic adsorbent.
Journal of Chromatography A, 1057, (1-2), 41-47, (2004)
   

imprinting

Xu XJ et al., Separation and screening of compounds of biological origin using molecularly imprinted polymers.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 61-69, (2004)
   

imprinting

Yang GL et al., Chiral separation of nateglinide and its (L) enantiomer on a molecularly imprinted polymer-based stationary phase.
Chromatographia, 59, (11-12), 705-708, (2004)
   

imprinting

Zhou YX et al., Potentiometric sensor for dipicolinic acid.
Abstracts of Papers of the American Chemical Society, 228, (ANYL), 054-054, (2004)
   

imprinting

Zhou YX et al., Molecular imprinting by surface polymerization.
Abstracts of Papers of the American Chemical Society, 227, (COLL), 545-545, (2004)
   

imprinting

Zimmerman SC et al., Synthetic hosts via molecular imprinting - are universal synthetic antibodies realistically possible?
Chemical Communications, (1), 5-14, (2004)
   

imprinting

Zuo XB et al., Novel methodology for metal ion separation based on molecular imprinting.
Abstracts of Papers of the American Chemical Society, 227, (ENVR), 048-048, (2004)
   

imprinting

Hall AJ et al., Non-covalent imprinting of phosphorous esters.
Analytica Chimica Acta, 538, (1-2), 9-14, (2005)
   

imprinting

Hirsch T et al., Size-controlled electrochemical synthesis of metal nanoparticles on monomolecular templates.
Angewandte Chemie International Edition, 44, (41), 6775-6778, (2005)
   

imprinting

Lieberzeit PA et al., Softlithography in chemical sensing - Analytes from molecules to cells.
Sensors, 5, (12), 509-518, (2005)
   

imprinting

Manesiotis P et al., An artificial riboflavin receptor prepared by a template analogue imprinting strategy.
Angewandte Chemie International Edition, 44, (25), 3902-3906, (2005)
   

imprinting

Book chapter, Marty JDet al., Molecular imprinting: State of the art and perspectives, 
In: Microlithography/Molecular Imprinting, Ito H, Marty JD (Eds.) 
Springer-Verlag GmbH: 1-35, (2005)    

imprinting

Rick J et al., Imprinting unique motifs formed from protein-protein associations.
Analytica Chimica Acta, 542, (1), 26-31, (2005)
   

imprinting

Book chapter, Turkewitsch Pet al., Molecular Imprinting, 
In: Advanced Concepts in Fluorescence Sensing, Pt. B: Macromolecular Sensing, Geddes CD, Lakowicz JR (Eds.) 
Springer: New York, 157-209, (2005)    

imprinting

Zdyrko B et al., Protein imprinting via solvent assisted grafting of polymer brush.
Abstracts of Papers of the American Chemical Society, 230, 412-POLY, (2005)
   

imprinting

Bacskay I et al., Universal method for synthesis of artificial gel antibodies by the imprinting approach combined with a unique electrophoresis technique for detection of minute structural differences of proteins, viruses, and cells (bacteria). III: Gel antibodies against cells (bacteria).
Electrophoresis, 27, (23), 4682-4687, (2006)
   

imprinting

Li F et al., One-pot preparation of silica-supported hybrid immobilized metal affinity adsorbent with macroporous surface based on surface imprinting coating technique combined with polysaccharide incorporated sol-gel process.
Journal of Chromatography A, 1129, (2), 223-230, (2006)
   

imprinting

Matsui J et al., Molecularly-imprinted polymeric logic gates selective for predetermined chemical input species.
Chemical Communications, (30), 3217-3219, (2006)
   

imprinting

Matsui T et al., Improved Method of Molecular Imprinting of Cyclodextrin on Silica-gel Surface for the Preparation of Stable Stationary HPLC Phase.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 56, (1-2), 39-44, (2006)
   

imprinting

Nishino H et al., Selective protein capture by epitope imprinting.
Angewandte Chemie International Edition, 45, (15), 2392-2396, (2006)
   

imprinting

Pei CY et al., Progress in the study on proteins imprinted technique.
Journal of Zhoukou Normal University, 23, (5), 77-81, (2006)
   

imprinting

Peng SW et al., Study on Adsorbing Properties and Kinetics of Co~(2+) Imprinting Chitosan Chelated Resins.
Guangzhou Chemical Industry, 34, (6), 1-3, (2006)
   

imprinting

Takátsy A et al., Universal method for synthesis of artificial gel antibodies by the imprinting approach combined with a unique electrophoresis technique for detection of minute structural differences of proteins, viruses, and cells (bacteria): II. Gel antibodies against virus (Semliki Forest Virus).
Journal of Separation Science, 29, (18), 2810-2815, (2006)
   

imprinting

Xi FN et al., Novel nylon-supported organic-inorganic hybrid membrane with hierarchical pores as a potential immobilized metal affinity adsorbent.
Journal of Chromatography A, 1125, (1), 38-51, (2006)
   

imprinting

Zhang FJ et al., Emulsion and macromolecules templated alginate based polymer microspheres.
Reactive and Functional Polymers, 66, (7), 712-719, (2006)
   

imprinting

Hur D et al., N-acylbenzotriazole mediated synthesis of some methacrylamido amino acids.
Letters In Organic Chemistry, 4, (8), 585-587, (2007)
   

imprinting

Li F et al., An ion-imprinted silica-supported organic-inorganic hybrid sorbent prepared by a surface imprinting technique combined with a polysaccharide incorporated sol-gel process for selective separation of cadmium(II) from aqueous solution.
Talanta, 71, (4), 1487-1493, (2007)
   

imprinting

Li F et al., Preparation of silica-supported porous sorbent for heavy metal ions removal in wastewater treatment by organic-inorganic hybridization combined with sucrose and polyethylene glycol imprinting.
Analytica Chimica Acta, 585, (2), 211-218, (2007)
   

imprinting

Siñeriz F et al., Toward an alternative for specific recognition of sulfated sugars. Preparation of highly specific molecular imprinted polymers.
Tetrahedron, 63, (8), 1857-1862, (2007)
   

imprinting

Ikeda Y et al., Synthesis of a trisulfated heparan sulfate disaccharide analog and its use as a template for preliminary molecular imprinting studies.
Carbohydrate Research, 343, (4), 587-595, (2008)
   

imprinting

Kung HH et al., Synthesis Strategies to Design Structures for Catalytic Applications.
Chinese Journal of Catalysis, 29, (11), 1187-1192, (2008)
   

imprinting

Tsvelikhovsky D et al., Forcing a cis-Product by Matrix Imprinting: Heck Reaction Catalyzed by Palladium Acetate Entrapped within cis-Imprinted Sol-Gel Derived Silicates.
Advanced Synthesis & Catalysis, 350, (18), 2856-2858, (2008)
   

imprinting

Arrachart G et al., Silylated Melamine and Cyanuric Acid as Precursors for Imprinted and Hybrid Silica Materials with Molecular Recognition Properties.
Chemistry - A European Journal, 15, (25), 6279-6288, (2009)
   

imprinting

Huang X et al., Incorporation of glutathione peroxidase active site into polymer based on imprinting strategy.
Biosensors and Bioelectronics, 25, (3), 657-660, (2009)
   

imprinting

Kamel AH et al., Flow-Through Assay of Quinine Using Solid Contact Potentiometric Sensors Based on Molecularly Imprinted Polymers.
Electroanalysis, 21, (24), 2701-2708, (2009)
   

imprinting

Li L et al., Preparation of Core-shell Magnetic Molecularly Imprinted Polymer Nanoparticles for Recognition of Bovine Hemoglobin.
Chemistry - An Asian Journal, 4, (2), 286-293, (2009)
   

imprinting

Lin YF et al., On-surface Cyclization of Tetrapeptides using Molecularly Imprinted Polymers as Non-covalent Auxiliaries.
Journal of the Chinese Chemical Society, 56, (1), 127-134, (2009)
   

imprinting

Qiu HB et al., Supramolecular Chiral Transcription and Recognition by Mesoporous Silica Prepared by Chiral Imprinting of a Helical Micelle.
Angewandte Chemie International Edition, 48, (17), 3069-3072, (2009)
   

imprinting

Ren YM et al., Characters of Cu(II) ion imprinted magnetic composite adsorbent.
Materials Science and Technology, 17, (6), 801-805, (2009)
   

imprinting

Ren YM et al., Characters of Cu (II) ion imprinted magnetic composite adsorbent.
Material Science and Technology, 17, (6), 801-805, (2009)
   

imprinting

Ren YM et al., Preparation of Cu (II) ion imprinted magnetic composite adsorbent.
Material Science and Technology, 17, (5), 680-685, (2009)
   

imprinting

Ren YM et al., Preparation of Cu (II) ion imprinted magnetic composite adsorbent.
Materials Science and Technology, 17, (5), 680-685, (2009)
   

imprinting

Tan J et al., A fluorescent sensor array based on ion imprinted mesoporous silica.
Biosensors and Bioelectronics, 24, (11), 3316-3321, (2009)
   

imprinting

Zhao YJ et al., Multiplex Label-Free Detection of Biomolecules with an Imprinted Suspension Array.
Angewandte Chemie International Edition, 48, (40), 7350-7352, (2009)
   

imprinting

Janiak DS et al., Effects of charge density on the recognition properties of molecularly imprinted polyampholyte hydrogels.
Polymer, 51, (3), 665-670, (2010)
   

imprinting

Riskin M et al., Imprinted Au-Nanoparticle Composites for the Ultrasensitive Surface Plasmon Resonance Detection of Hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX).
Advanced Materials, 22, (12), 1387-1391, (2010)
   

imprinting

Yang LB et al., Ultrasensitive SERS Detection of TNT by Imprinting Molecular Recognition Using a New Type of Stable Substrate.
Chemistry - A European Journal, 16, (42), 12683-12693, (2010)
   

imprinting

Ying XG et al., Preparation and characterization of protein imprinted agarose microspheres.
Polymer Bulletin, 65, (3), 245-263, (2010)
   

imprinting

Zhang HB et al., Preparation and adsorption properties of p-nitrophenol imprinted materials based on multi-walled carbon nanotubes surface.
Chemical Journal of Chinese Universities, 31, (11), 2141-2147, (2010)
   

imprinting

Hellner G et al., Novel Sol-Gel Lipases by Designed Bioimprinting for Continuous-Flow Kinetic Resolutions.
Advanced Synthesis & Catalysis, 353, (13), 2481-2491, (2011)
   

imprinting

Hong Y et al., Kinetics of adsorption of Zn2+ on imprinted chitosan polymer.
Chemical Industry and Engineering Progress, 30, (6), 1296-1301, (2011)
   

imprinting

Liang Y et al., Composites of Polyaniline Nanofibers and Molecularly Imprinted Polymers for Recognition of Nitroaromatic Compounds.
Chemistry - A European Journal, 17, (21), 5989-5997, (2011)
   

imprinting

Liu X et al., Solid Phase Extraction of Ursolic Acid Using Imprinted Polymer Modified Multi-walled Carbon Nanotubes.
Chinese Journal of Analytical Chemistry, 39, (6), 839-845, (2011)
   

imprinting

Qin L et al., A Thermosensitive Monolithic Column as an Artificial Antibody for the On-line Selective Separation of the Protein.
Chemistry - A European Journal, 17, (5), 1696-1704, (2011)
   

imprinting

Servant A et al., Tuning Molecular Recognition in Water-Soluble Nanogels with Enzyme-Like Activity for the Kemp Elimination.
Chemistry - A European Journal, 17, (39), 11052-11059, (2011)
   

imprinting

Shin MJ et al., Sensing capability of molecularly imprinted self-assembled monolayer.
Biochemical Engineering Journal, 54, (1), 57-61, (2011)
   

imprinting

Zhang W et al., Composite of CdTe quantum dots and molecularly imprinted polymer as a sensing material for cytochrome c.
Biosensors and Bioelectronics, 26, (5), 2553-2558, (2011)
   

imprinting

Aba L et al., Selectivity Improvement of Gas Sensor Based on Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate) Thin Film by Using Imprinting Method.
Journal of Modern Physics, 3, (7), 529-533, (2012)
   

imprinting

Dechtrirat D et al., Protein Rebinding to a Surface-Confined Imprint.
Advanced Functional Materials, 22, (24), 5231-5237, (2012)
   

imprinting

Gruber B et al., Dynamic Interface Imprinting: High-Affinity Peptide Binding Sites Assembled by Analyte-Induced Recruiting of Membrane Receptors.
Angewandte Chemie International Edition, 51, (40), 10060-10063, (2012)
   

imprinting

Guan GJ et al., Molecularly Imprinted Shells from Polymer and Xerogel Matrices on Polystyrene Colloidal Spheres.
Chemistry - A European Journal, 18, (15), 4692-4698, (2012)
   

imprinting

Lattach Y et al., Influence of Chemical and Structural Properties of Functionalized Polythiophene-Based Layers on Electrochemical Sensing of Atrazine.
ChemPhysChem, 13, (1), 281-290, (2012)
   

imprinting

Liu X et al., Preparation and Adsorption Performance of Emodin Imprinted Material Based on Multi-wall Carbon Nanotubes.
Chemistry Bulletin, 75, (1), 51-57, (2012)
   

imprinting

Schillinger E et al., An Artificial Estrogen Receptor through Combinatorial Imprinting.
Chemistry - A European Journal, 18, (46), 14773-14783, (2012)
   

imprinting

Shin MJ et al., Sensing Capability of Molecularly Imprinted Self-Assembled Monolayer Using Terphenylpropanethiol.
Particulate Science and Technology, 30, (6), 543-552, (2012)
   

imprinting

Starosvetsky J et al., Effects of Physical Parameters on Bacterial Cell Adsorption onto Pre-Imprinted Sol-Gel Films.
Journal of Biomaterials and Nanobiotechnology, 3, (4A), 499-507, (2012)
   

imprinting

Xie JJ et al., Handedness Inversion of Chiral Amphiphilic Molecular Assemblies Evidenced by Supramolecular Chiral Imprinting in Mesoporous Silica Assemblies.
Chemistry - A European Journal, 18, (9), 2559-2564, (2012)
   

imprinting

Yang Y et al., Preparation and Catalytic Performances of a Molecularly Imprinted Ru-Complex Catalyst with an NH2 Binding Site on a SiO2 Surface.
Chemistry - A European Journal, 18, (4), 1142-1153, (2012)
   

imprinting

Yuan YX et al., Hydrogel Photonic Sensor for the Detection of 3-Pyridinecarboxamide.
Chemistry - A European Journal, 18, (1), 303-309, (2012)
   

imprinting

Albers W et al., Self-Assembly of Pyridine-Modified Lipoic Acid Derivatives on Gold and Their Interaction with Thyroxine (T4).
International Journal of Molecular Sciences, 14, (2), 3500-3513, (2013)
   

imprinting

Albers WM et al., Self-Assembly of Pyridine-Modified Lipoic Acid Derivatives on Gold and Their Interaction with Thyroxine (T4).
International Journal of Molecular Sciences, 14, (2), 3500-3513, (2013)
   

imprinting

Bengani LC et al., Contact lenses as a platform for ocular drug delivery.
Expert Opinion on Drug Delivery, 10, (11), 1483-1496, (2013)
   

imprinting

Liu YQ et al., Adsorption of Cr(VI) by modified chitosan from heavy-metal polluted water of Xiangjiang River, China.
Transactions of Nonferrous Metals Society of China, 23, 3095-3103, (2013)
   

imprinting

Mafu LD et al., Ion-imprinted polymers for environmental monitoring of inorganic pollutants: synthesis, characterization, and applications.
Environmental Science and Pollution Research, 20, (2), 790-802, (2013)
   

imprinting

Mojica ERE, Screening of different computational models for the preparation of sol-gel imprinted materials.
Journal of Molecular Modeling, 19, (9), 3911-3923, (2013)
   

imprinting

Sakti SCW et al., Adsorption of gold(III) on ionic imprinted amino-silica hybrid prepared from rice hull ash.
Pure And Applied Chemistry, 85, (1), 211-223, (2013)
   

imprinting

Zhang TT et al., Research on Progress of Molecular Imprinting Technology.
Chemical Intermediate, (11), 15-18, (2013)
   

imprinting

Abraham J et al., Grafting of molecularly imprinted polymer on multiwalled carbon nanotube for highly selective and sensitive determination of Thymine.
European Journal of Applied Engineering and Scientific Research, 3, (3), 26-33, (2014)
   

imprinting

Cao JL et al., The Synthesis of Magnetic Lysozyme-Imprinted Polymers by Means of Distillation-Precipitation Polymerization for Selective Protein Enrichment.
Chemistry - An Asian Journal, 9, (2), 526-533, (2014)
   

imprinting

Chen LX et al., Effectively designed molecularly imprinted polymers for selective extraction of glabridin from Glycyrrhiza glabra L. residues by screening the library of non-imprinted polymers.
Journal of Chromatography B, 965, 1-6, (2014)
   

imprinting

Kraus-Ophir S et al., Nanoparticle-Imprinted Polymers for Size-Selective Recognition of Nanoparticles.
Angewandte Chemie International Edition, 53, (1), 294-298, (2014)
   

imprinting

Krstulja A et al., Evaluation of molecularly imprinted polymers using 2’,3’,5’-tri-O-acyluridines as templates for pyrimidine nucleoside recognition.
Analytical and Bioanalytical Chemistry, 406, (25), 6275-6284, (2014)
   

imprinting

Pardo A et al., Molecularly Imprinted Polymers: Compromise between Flexibility and Rigidity for Improving Capture of Template Analogues.
Chemistry - A European Journal, 20, (12), 3500-3509, (2014)
   

imprinting

Takeuchi T et al., Conjugated-Protein Mimics with Molecularly Imprinted Reconstructible and Transformable Regions that are Assembled Using Space-Filling Prosthetic Groups.
Angewandte Chemie International Edition, 53, (47), 12765-12770, (2014)
   

imprinting

Xu D et al., Molecularly Imprinted Photonic Polymers as Sensing Elements for the Creation of Cross-Reactive Sensor Arrays.
Chemistry - A European Journal, 20, (50), 16620-16625, (2014)
   

imprinting

Ye J et al., A Boronate Affinity Sandwich Assay: An Appealing Alternative to Immunoassays for the Determination of Glycoproteins.
Angewandte Chemie International Edition, 53, (39), 10386-10389, (2014)
   

imprinting

Bruchiel-Spanier N et al., Nanoparticle-Imprinted Polymers: Shell-Selective Recognition of Au Nanoparticles by Imprinting Using the Langmuir-Blodgett Method.
ChemElectroChem, 2, (6), 795-802, (2015)
   

imprinting

Cejner M et al.,  Ion-imprinted polymers: synthesis, characterization and applications.
Ann. Univ. Mariae Curie-Sklodowska, Lublin-Polonia: Sect. AA, 70, (2), 67-85, (2015)
   

imprinting

Okafor A et al., Surface Imprinted Sensor with Fluorescence Detection.
Sensor Letters, 13, (9), 743-749, (2015)
   

imprinting

Yang S et al., A Facile and Universal Method to Prepare Hydrophilic Molecularly Imprinted Microspheres by Encapsulating a Polymer in Hollow Mesoporous Silica Microspheres.
Chemistry - An Asian Journal, 10, (3), 722-727, (2015)
   

imprinting

Zhang M et al., Selective adsorption of Ag+ by ion-imprinted O-carboxymethyl chitosan beads grafted with thiourea-glutaraldehyde.
Chemical Engineering Journal, 264, 56-65, (2015)
   

imprinting

Zhang Y et al., Active Targeting of Tumors through Conformational Epitope Imprinting.
Angewandte Chemie International Edition, 54, (17), 5157-5160, (2015)
   

imprinting

Afzal A et al., A collaborative effect of imprinted polymers and Au nanoparticles on bioanalogous detection of organic vapors.
Sensors and Actuators B: Chemical, 231, 431-439, (2016)
   

imprinting

Bates F et al., Virtual Screening of Receptor Sites for Molecularly Imprinted Polymers.
Macromolecular Bioscience, 16, (8), 1170-1174, (2016)
   

imprinting

Bonomi P et al., A New Versatile Water-Soluble Iniferter Platform for the Preparation of Molecularly Imprinted Nanoparticles by Photopolymerisation in Aqueous Media.
Chemistry - A European Journal, 22, (29), 10150-10154, (2016)
   

imprinting

Eser A et al., Removal of erythrosine dye from aqueous solutions using magnetic chitosan with erythrosine as imprinted molecules.
Desalination and Water Treatment, 57, (36), 17002-17010, (2016)
   

imprinting

He H et al., Solid Amine Adsorbent Prepared by Molecular Imprinting and Its Carbon Dioxide Adsorption Properties.
Chemistry - An Asian Journal, 11, (21), 3055-3061, (2016)
   

imprinting

He J et al., A Boiling-Water-Stable, Tunable White-Emitting Metal-Organic Framework from Soft-Imprint Synthesis.
Chemistry - A European Journal, 22, (5), 1597-1601, (2016)
   

imprinting

Horikawa R et al., A Programmable Signaling Molecular Recognition Nanocavity Prepared by Molecular Imprinting and Post-Imprinting Modifications.
Angewandte Chemie International Edition, 55, (42), 13023-13027, (2016)
   

imprinting

Inanan T et al., Selective cholesterol adsorption by molecular imprinted polymeric nanospheres and application to GIMS.
International Journal of Biological Macromolecules, 92, 451-460, (2016)
   

imprinting

Liu J et al., Probing Low-Copy-Number Proteins in a Single Living Cell.
Angewandte Chemie International Edition, 55, (42), 13215-13218, (2016)
   

imprinting

Ma LC et al., Synthesis of Cu2+ ion-imprinted magnetic chitosan beads for selective recognition of Cu2+ ion in aqueous solution.
Chinese Journal of Rare Metals, 40, (6), 606-612, (2016)
   

imprinting

Nezhadali A et al., 1,4-dihydroxyanthraquinone electrochemical sensor based on molecularly imprinted polymer using multi-walled carbon nanotubes and multivariate optimization method.
Talanta, 146, 525-532, (2016)
   

imprinting

Niu MC et al., Core-shell nanoparticles coated with molecularly imprinted polymers: a review.
Microchimica Acta, 183, (10), 2677-2695, (2016)
   

imprinting

Shahar T et al., Molecularly imprinted polymer particles: Formation, characterization and application.
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 495, 11-19, (2016)
   

imprinting

Smitha KR, Development of enantioselective molecular imprinted polymers of D-mandelic acid.
Journal of Research Innovations in Engineering & Technology, 2, (3), 55-59, (2016)
   

imprinting

Yilmaz Y et al., How the internal structures of the imprinted and the random hydrogels change upon washing?
Journal of Sol-Gel Science and Technology, 80, (1), 77-86, (2016)
   

imprinting

Liang RN et al., Mussel-Inspired Surface-Imprinted Sensors for Potentiometric Label-Free Detection of Biological Species.
Angewandte Chemie International Edition, 56, (24), 6833-6837, (2017)
   

imprinting

Lv N et al., Pyrophosphate-Imprinted Magnetic Mesoporous Silica Microspheres for Recognition, Enrichment and MS Detection of Phosphopeptides.
ChemistrySelect, 2, (18), 5089-5094, (2017)
   

imprinting

Poller AM et al., Surface Imprints: Advantageous Application of Ready2use Materials for Bacterial Quartz-Crystal Microbalance Sensors.
ACS Applied Materials & Interfaces, 9, (1), 1129-1135, (2017)
   

imprinting

Book chapter, Schirhagl R, Transferring the Selectivity of a Natural Antibody into a Molecularly Imprinted Polymer, 
In: Synthetic Antibodies: Methods and Protocols, Tiller T (Ed.) 
Springer: New York, NY, 325-340, (2017)    

imprinting

Azizkhani S et al., Adsorption of Copper from aqueous solution by chitosan using molecular imprinting technology.
Science and Technology Indonesia, 3, (4), 141-146, (2018)
   

imprinting

Bruchiel-Spanier N et al., Electrochemically Deposited Sol-Gel Based Nanoparticle-Imprinted Matrices for the Size-Selective Detection of Gold Nanoparticles.
ACS Applied Nano Materials, 1, (10), 5612-5619, (2018)
   

imprinting

Dulay MT et al., Pathogen-Imprinted Organosiloxane Polymers as Selective Biosensors for the Detection of Targeted E. coli.
C, 4, (2), ArticleNo29-(2018)
   

imprinting

Mahmoud ME et al., Imprinting "Nano-SiO2-Crosslinked Chitosan-Nano-TiO2" Polymeric Nanocomposite for Selective and Instantaneous Microwave-Assisted Sorption of Hg(II) and Cu(II).
ACS Sustainable Chemistry & Engineering, 6, (4), 4564-4573, (2018)
   

imprinting

Tuwahatu CA et al., The molecularly imprinted polymer essentials: curation of anticancer, ophthalmic, and projected gene therapy drug delivery systems.
Journal of Controlled Release, 287, 24-34, (2018)
   

imprinting

Wolska J et al., Fine polymer imprinted layers for the monitoring of bisphenol A in aqueous solutions.
Separation Science and Technology, 53, (2), 206-218, (2018)
   

imprinting

Bruchiel-Spanier N et al., Effect of matrix-nanoparticle interactions on recognition of aryldiazonium nanoparticle-imprinted matrices.
Nano Research, 12, (2), 265-271, (2019)
   

imprinting

García Becerra C et al., Miniaturized imprinted solid phase extraction to the selective analysis of Coenzyme Q10 in urine.
Journal of Chromatography B, 1116, 24-29, (2019)
   

imprinting

Xing CL et al., Multiple Metal Ion Imprinted Electrochemical Sensor with Enhanced Sensitivity by Graphene Oxide-C60 Composite.
Chinese Journal of Applied Chemistry, 36, (3), 341-348, (2019)
   

imprinting

Yang H et al., Investigation on synthesis of ion-imprinted mesoporous adsorbents by using ultrasound- and microwave-assisted preparation and their dynamic adsorption properties on heavy metals.
Environmental Science and Pollution Research, 26, (11), 10987-10999, (2019)
   

imprinting

Cai L et al., A magnetic thermosensitive fluorescence imprinted polymer for selective detection of bovine hemoglobin.
Microchemical Journal, 154, Article104603-(2020)
   

imprinting

Ullah B et al., 4-Nitrophenol imprinted core-shell poly(N-isopropylacrylamide-acrylic acid)/poly(acrylic acid) microgels loaded with cadmium nanoparticles: A novel catalyst.
Materials Chemistry and Physics, 260, Article124156-(2021)
   

Imprinting-adsorption

Wang F et al., Hexagonal tungsten trioxide nanorods as a rapid adsorbent for methylene blue.
Separation and Purification Technology, 91, (1), 103-107, (2012)
   

Imprinting and nanotechnology

Gu ZG et al., Preparation of Carbon Nanotube/MnO2 Nanocomposite as an Electrode Modifier for Prostate-Specific Antigen (PSA) Determination.
International Journal of Electrochemical Science, 12, 10726-10736, (2017)
   

IMPRINTING APPROACH

Burleigh M et al., Removal of UO22+ and Sr2+ from aqueous solutions via sol-gel extraction. A molecular imprinting approach.
Abstracts of Papers of the American Chemical Society, 217, (NUCL), 72-72, (1999)
   

IMPRINTING APPROACH

Lisichkin GV et al., Chemically modified oxide surfaces capable of molecular recognition.
Colloid Journal, 66, (4), 387-399, (2004)
   

Imprinting approaches

Sousa MD et al., Molecularly imprinted polymers for controlling drug release. Part 1: Synthesis and characterization.
Quimica Nova, 32, (6), 1609-1619, (2009)
   

Imprinting coating

Li DJ et al., Efficient preparation of surface imprinted magnetic nanoparticles using poly (2-anilinoethanol) as imprinting coating for the selective recognition of glycoprotein.
Talanta, 184, 316-324, (2018)
   

imprinting condition

Dong Y et al., Experimental Investigation on the Molecularly Imprinted Polymer Receptor for Hydrochlorothiazide.
Journal of Jiangsu Polytechnic University, 19, (4), 21-24, (2007)
   

Imprinting effect

Yao LD et al., Nicotinic acid voltammetric sensor based on molecularly imprinted polymer membrane-modified electrode.
Analytical Letters, 40, (4), 677-688, (2007)
   

Imprinting effect

Athikomrattanakul U et al., Development of molecularly imprinted polymers for the binding of nitrofurantoin.
Biosensors and Bioelectronics, 25, (1), 82-87, (2009)
   

Imprinting effect

Zhang TL et al., Influence of the Number and Relative Position of the Interacting Groups in Template Molecule on Molecular Imprinting Effect.
Chemical Journal of Chinese Universities, 31, (6), 1126-1130, (2010)
   

Imprinting effect

Chaput L et al., Enhancing the enantioselectivity of CALB by substrate imprinting: A combined experimental and molecular dynamics simulation model study.
Journal of Molecular Catalysis B: Enzymatic, 84, 55-61, (2012)
   

Imprinting effect

Cela-Pérez MC et al., A study of competitive molecular interaction effects on imprinting of molecularly imprinted polymers.
Vibrational Spectroscopy, 65, 74-83, (2013)
   

Imprinting effect

Gryshchenko AO et al., Development of Molecularly Imprinted Polymer in Porous Film Format for Binding of Phenol and Alkylphenols from Water.
International Journal of Molecular Sciences, 15, (1), 1338-1357, (2014)
   

Imprinting effect

Wang J et al., Understanding the relationships between molecule structure and imprinting effect of two acetyl-nitrogen heterocyclic compounds.
Journal of Molecular Recognition, 29, (6), 260-265, (2016)
   

Imprinting effect

Song WF et al., A star-shaped molecularly imprinted polymer derived from polyhedral oligomeric silsesquioxanes with improved site accessibility and capacity for enantiomeric separation via capillary electrochromatography.
Microchimica Acta, 186, (1), Article22-(2018)
   

Imprinting effect

Cao Y et al., Preparation and characterisation of a novel copper-imprinted polymer based on β-cyclodextrin copolymers for selective determination of Cu2+ ions.
Polymer International, 68, (4), 694-699, (2019)
   

imprinting efficiency

Wang XJ et al., Concept of Imprinting Efficiency and Recent Progress of Molecular Imprinting.
Chemical World, 48, (4), 243-247, (2007)
   

imprinting efficiency

Zhao KY et al., Macromolecularly imprinted calcium phosphate/alginate hybrid polymer microspheres with the surface imprinting of bovine serum albumin in inverse-phase suspension.
Journal of Applied Polymer Science, 109, (4), 2687-2693, (2008)
   

imprinting efficiency

Chen PY et al., Fabrication of a molecularly imprinted polymer sensor by self-assembling monolayer/mediator system.
Analytica Chimica Acta, 643, (1-2), 38-44, (2009)
   

imprinting efficiency

Zhang ZL et al., Synthesis of highly efficient D-naproxen imprinted polymer and investigation of their specific performance.
Journal of Applied Polymer Science, 113, (2), 1050-1062, (2009)
   

imprinting efficiency

Chen PY et al., A novel molecularly imprinted polymer thin film as biosensor for uric acid.
Talanta, 80, (3), 1145-1151, (2010)
   

imprinting efficiency

He M et al., Preparation and imprinting efficiency evaluation of molecularly imprinted polymer of apigenin.
Ion Exchange and Adsorption, 26, (6), 514-523, (2010)
   

imprinting efficiency

Book chapter, Meier Fet al., Molecularly Imprinted Polymers as Artificial Receptors, 
In: Artificial Receptors for Chemical Sensors, Mirsky VM, Yatsimirsky AK (Eds.) 
Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, 391-437, (2010)    

imprinting efficiency

Zhang TL et al., Influence of Properties of Indole-3-Carboxylic Acids on Their Molecular Imprinting Efficiency.
Chinese Journal of Analytical Chemistry, 38, (4), 593-597, (2010)
   

imprinting efficiency

Zhao KY et al., The Rebinding Properties of Bovine Serum Albumin Imprinted Calcium Alginate/Phosphate Hybrid Microspheres Via the Adjustment of pH Values and Salt Concentration.
Macromolecular Symposia, 297, (1), 126-137, (2010)
   

imprinting efficiency

Bonomi P et al., Modulation of imprinting efficiency in nanogels with catalytic activity in the Kemp elimination.
Journal of Molecular Recognition, 25, (6), 352-360, (2012)
   

imprinting efficiency

Mathew D et al., Amidase activity of phosphonate analogue imprinted chymotrypsin mimics in shape-selective, substrate-specific and enantioselective amidolysis of l-phenylalanine-p-nitroanilides.
Journal of Molecular Catalysis A: Chemical, 415, 65-73, (2016)
   

imprinting efficiency

Mathew D et al., Amidase activity of phosphonate TSA-built polymer catalysts derived from organic monomers in the amidolysis of amino acid p-nitroanilides.
Applied Catalysis A: General, 528, 93-103, (2016)
   

imprinting efficiency

Zhang YY et al., Molecularly imprinted polymers based on multiwalled carbon nanotubes surface for the fabrication and application of oxacillin.
Journal of Functional Materials, 48, (4), 4199-4204, (2017)
   

imprinting efficiency

Amininasab SM et al., Sensitive Detection of Morphine by Efficient Molecular Imprinted Polymers Based on Goethite Nanorods.
Macromolecular Research, 26, (8), 730-737, (2018)
   

Imprinting efficiency (IE)

Zhao KY et al., Rebinding and recognition properties of protein-macromolecularly imprinted calcium phosphate/alginate hybrid polymer microspheres.
Reactive and Functional Polymers, 68, (3), 732-741, (2008)
   

Imprinting factor

Hsieh RY et al., Designing a molecularly imprinted polymer as an artificial receptor for the specific recognition of creatinine in serums.
Biomaterials, 27, (9), 2083-2089, (2006)
   

Imprinting factor

Tóth B et al., Nonlinear adsorption isotherm as a tool for understanding and characterizing molecularly imprinted polymers.
Journal of Chromatography A, 1119, (1-2), 29-33, (2006)
   

Imprinting factor

Nantasenamat C et al., Quantitative structure-imprinting factor relationship of molecularly imprinted polymers.
Biosensors and Bioelectronics, 22, (12), 3309-3317, (2007)
   

Imprinting factor

Lopez C et al., Synthesis and study of a molecularly imprinted polymer for the specific extraction of indole alkaloids from Catharanthus roseus extracts.
Analytica Chimica Acta, 683, (2), 198-205, (2011)
   

Imprinting factor

Nasser II et al., Hybrid imprinted membranes for selective recognition of quercetin.
Separation and Purification Technology, 163, 331-340, (2016)
   

Imprinting factor

Yang C et al., Extensive Imprinting Adaptability of Polyacrylamide-based Amphoteric Cryogels Against Protein Molecules.
Chinese Journal of Analytical Chemistry, 44, (9), 1322-1327, (2016)
   

Imprinting factor

Chin KZ et al., SiO2-Coated Molecularly Imprinted Copolymer Nanostructures for the Adsorption of Bisphenol A.
ACS Applied Nano Materials, 2, (1), 89-99, (2019)
   

Imprinting factor

Book chapter, de Escobar CCet al., Nanostructured Imprinted Supported Photocatalysts: Organic and Inorganic Matrixes, 
In: Nanophotocatalysis and Environmental Applications : Materials and Technology, Inamuddin, Sharma G, Kumar A, Lichtfouse E, Asiri AM (Eds.) 
Springer International Publishing: Cham, 1-48, (2019)    

Imprinting factor

Kalogiouri NP et al., Synthesis and application of molecularly imprinted polymers using sol-gel matrix imprinting technology for the efficient solid-phase extraction of BPA from water.
Microchemical Journal, 157, Article104965-(2020)
   

Imprinting factor

Pratama KF et al., Effect of the Molecularly Imprinted Polymer Component Ratio on Analytical Performance.
Chemical and Pharmaceutical Bulletin, 68, (11), 1013-1024, (2020)
   

Imprinting factor

Kumar DR et al., Molecularly imprinted hornlike polymer@electrochemically reduced graphene oxide electrode for the highly selective determination of an antiemetic drug.
Analytica Chimica Acta, 1141, 71-82, (2021)
   

Imprinting factor

Wang LY et al., Specific determination of HBV using a viral aptamer molecular imprinting polymer sensor based on ratiometric metal organic framework.
Microchimica Acta, 188, (7), Article221-(2021)
   

imprinting factors

Ndunda EN, Molecularly imprinted polymers - A closer look at the control polymer used in determining the imprinting effect: A mini review.
Journal of Molecular Recognition, 33, (11), Article_e2855-(2020)
   

imprinting hydrogel

Proceeding, Yamashita K et al, Preparation of imprinting hydrogel adsorbents, 
In: Polymer Preprints, Japan, 
1842, (2002)
   

imprinting hydrogel

Proceeding, Yamashita K et al, Dependence of gel structure on the molecular recognition ability of stimuli-responsive imprinting hydrogel, 
In: Polymer Preprints, Japan, 
1843, (2002)
   

imprinting hydrogel

Proceeding, Yamashita K et al, Attempts to imprinting of hydrogel in aqueous system, 
In: Polymer Preprints, Japan, 
684, (2002)
   

imprinting-immobilization

Book chapter, Cao LQ, Unconventional Enzyme Immobilization, 
In: Carrier-bound Immobilized Enzymes, Cao LQ (Ed.) 
Wiley-VCH: 449-549, (2006)    

imprinting materials

Zhang XF et al., Protein surface-imprinting technology.
Progress In Chemistry, 28, (1), 149-162, (2016)
   

Imprinting mechanism

Sun Y et al., Study on Molecular Recognition Mechanism of Chiral (S)-Ibuprofen’s Hydrogen Bonds Self-assembly Imprinted Polymer.
Chemical Journal of Chinese Universities, 33, (4), 838-842, (2012)
   

Imprinting mechanism

Pang SS et al., Synthesis of Bisphenol A π-π Stacking Self-assembly Imprinted Polymer by Precipitation Polymerization and Study on Specificity Recognition Mechanism.
Acta Polymerica Sinica, (1), 49-55, (2014)
   

Imprinting method

Dhakal RP et al., Planarity-recognition enhancement of N-(2-pyridylmethyl)chitosan by imprinting planar metal ions.
Reactive and Functional Polymers, 68, (11), 1549-1556, (2008)
   

imprinting methods

Zhang XF et al., Protein surface-imprinting technology.
Progress In Chemistry, 28, (1), 149-162, (2016)
   

Imprinting molecule

Yao J et al., Preparation of metal ion imprinting adsorbent resin by inverse microemulsion polymerization and its performance.
Petrochemical Technology, 37, (4), 397-401, (2008)
   

imprinting nanoshell

Xu WW et al., Preparation of Monodisperse Molecularly Imprinted Shell Based on Silica Microsphere Surface for Specific Recognition and Determination of Dibenzyl Phthalate in Food Packaging Materials.
Journal of Instrumental Analysis, 35, (8), 929-936, (2016)
   

imprinting polymer

Wu WX et al., Characteristics of Molecular Recognition of Triadimefon Imprinting Polymer.
Journal of Hebei University (Natural Science Edition), 26, (4), 396-400,404, (2006)
   

imprinting polymer

Mustafai FA et al., Microwave-assisted synthesis of imprinted polymer for selective removal of arsenic from drinking water by applying Taguchi statistical method.
European Polymer Journal, 109, 133-142, (2018)
   

imprinting polymerization

Yu KY et al., Metal ion-imprinted microspheres prepared by reorganization of the coordinating groups on the surface.
Analytical Sciences, 8, (5), 701-703, (1992)
   

imprinting polymerization

Tsukagoshi K et al., Adsorption behavior of metal-ions onto Co(II)-imprinted microspheres prepared by surface imprinting - effect of Co(II)-imprinting.
Kobunshi Ronbunshu, 50, (5), 455-458, (1993)
   

imprinting polymerization

Piletsky SA et al., A biomimetic receptor system for sialic acid based on molecular imprinting.
Analytical Letters, 29, (2), 157-170, (1996)
   

imprinting polymerization

Tsukagoshi K et al., Metal-ion imprinted resin prepared using an interaction at the aqueous-organic interface and its characterization.
Bunseki Kagaku, 45, (11), 975-986, (1996)
   

imprinting polymerization

Andersson HS et al., Spectroscopic evaluation of molecular imprinting polymerization systems.
Bioorganic Chemistry, 25, (3), 203-211, (1997)
   

imprinting polymerization

Baggiani C et al., Chromatographic characterization of a molecularly imprinted polymer binding theophylline in aqueous buffers.
Journal of Chromatography A, 786, (1), 23-29, (1997)
   

imprinting polymerization

Piletsky SA et al., Optical detection system for triazine based on molecularly-imprinted polymers.
Analytical Letters, 30, (3), 445-455, (1997)
   

imprinting polymerization

Knutsson M et al., Novel chiral recognition elements for molecularly imprinted polymer preparation.
Journal of Molecular Recognition, 11, (1-6), 87-90, (1998)
   

imprinting polymerization

Subrahmanyam S et al., Bite-and-switch approach to creatine recognition by use of molecularly imprinted polymers.
Advanced Materials, 12, (10), 722-724, (2000)
   

imprinting polymerization

Zheng N et al., Chromatographic characterization of sulfonamide imprinted polymers.
Microchemical Journal, 69, (2), 153-158, (2001)
   

imprinting polymerization

Tsunemori H et al., Surface imprinting polymers for the recognition of nucleotides.
Bioseparation, 10, (6), 315-321, (2002)
   

imprinting polymerization

Fujiwara I et al., Preparation of ferrocyanide-imprinted pyridine-carrying microspheres by surface imprinting polymerization.
Analytical Sciences, 19, (4), 617-620, (2003)
   

imprinting polymerization

Oral E et al., Dynamic studies of molecular imprinting polymerizations.
Polymer, 45, (18), 6163-6173, (2004)
   

imprinting polymerization

Ashraf S et al., Imprinted polymers for the removal of heavy metal ions from water.
Water Science And Technology, 64, (6), 1325-1332, (2011)
   

imprinting polymers

Liu YQ et al., Research and progress of mimetic enzymes.
Progress In Chemistry, 17, (6), 1067-1073, (2005)
   

imprinting polymers

Pavel D et al., Computationally designed monomers and polymers for molecular imprinting of theophylline - part II.
Polymer, 46, (18), 7543-7556, (2005)
   

Imprinting ratio

Wang YL et al., Theoretical studies on molecular imprinted interaction between enrofloxacin and methacrylic acid.
Acta Polymerica Sinica, (12), 1525-1530, (2013)
   

Imprinting sites

Wang X et al., An electrochemical adenine sensor employing enhanced three-dimensional conductivity and molecularly imprinted sites of Au NPs bridged poly(3-thiophene acetic acid).
Sensors and Actuators B: Chemical, 255, (Part 3), 2952-2958, (2018)
   

Imprinting Technique

Luo Y et al., Synthesis and characterization of Co(II) salen functionalized MCM-41-type hybrid mesoporous silicas and their applications in catalysis for styrene oxidation with H2O2.
Microporous And Mesoporous Materials, 86, (1-3), 23-30, (2005)
   

Imprinting Technique

Proceeding, Firouzzare M, Preparation of a Novel Selective Adsorbent for Detection and Measurement of Mercury (II) Ions, 
In: Advanced Materials Research, Wu A (Ed.), 
645-649, (2013)
   

Imprinting Technique

Meng MJ et al., Selective separation of salicylic acid from aqueous solutions using molecularly imprinted nano-polymer on wollastonite synthesized by oil-in-water microemulsion method.
Journal of Industrial and Engineering Chemistry, 20, (6), 3975-3983, (2014)
   

Imprinting Technique

Chen TT et al., Imprinted ZnO/Magnetic Fly-Ash Photocatalyst Selectively Photodegraded Danofloxacin Mesylate Solution.
Nanoscience and Nanotechnology Letters, 7, (5), 441-445, (2015)
   

Imprinting Technique

Han XY et al., Recent Progress of Imprinted Polymer Photonic Waveguide Devices and Applications.
Polymers, 10, (6), ArticleNo603-(2018)
   

Imprinting Technique

Huang Y et al., Review on Fundamentals, Preparations and Applications of Imprinted Polymers.
Current Organic Chemistry, 22, (16), 1600-1618, (2018)
   

Imprinting Technique

Liu WF et al., Thermo-responsive ion imprinted polymer on the surface of magnetic carbon microspheres for identification and removal of low-concentrations of Cu2+.
Environmental Chemistry, 15, (5), 306-316, (2018)
   

imprinting technology

Marestoni LD et al., Ion imprinted polymers: fundamentals, preparation strategies and applications in analytical chemistry.
Quimica Nova, 36, (8), 1194-1207, (2013)
   

imprinting technology

Kaya HK et al., A novel design thia-bilane structure-based molecular imprinted electrochemical sensor for sensitive and selective dopamine determination.
Sensors and Actuators B: Chemical, 346, Article130425-(2021)
   

imprinting template

He FY et al., Dispute for Japanese (wild) honeysuckle flower based on supermolecular imprinting templates.
China Journal of Chinese Materia Medica, 41, (6), 1152-1160, (2016)
   

imprinting template

He FY et al., Impact of "imprinting templates" characteristics of traditional Chinese medicine injection supramolecules on (anaphylactoid) hypersensibility.
China Journal of Chinese Materia Medica, 41, (2), 345-349, (2016)
   

imprinting template

Yang YT et al., Chinese medicine preparation supramolecular imprinting templates based on in vitro release characteristics of BYHW sustained-release tablet.
China Journal of Chinese Materia Medica, 41, (6), 1040-1045, (2016)
   

imprinting TS-1 zeolite

Widati AA et al., Highly selective glassy carbon electrode based on modified imprinting TS-1 zeolite.
Journal of Chemical and Pharmaceutical Research, 6, (7), 2827-2831, (2014)
   

Imprint ion

Singh DK et al., Synthesis and characterization of Fe(III)-ion imprinted polymer for recovery of Fe(III) from water samples.
Journal of Scientific and Industrial Research, 69, (10), 767-772, (2010)
   

imprint molecule

Heilmann J et al., Problems in selective catalysis with molecular imprints in silica - selective lactones formation from hydroxyesters in micropores.
Zeitschrift Fur Naturforschung Section B-A Journal Of Chemical Sciences, 50, 460-468, (1995)
   

imprint molecule

Welch CJ, Imprintable brush-type chiral stationary-phase.
Journal of Chromatography A, 689, (2), 189-193, (1995)
   

imprint molecule

Schweitz L et al., Capillary electrochromatography with molecular imprint-based selectivity for enantiomer separation of local anaesthetics.
Journal of Chromatography A, 792, (1-2), 401-409, (1997)
   

imprint molecule

Yoshida M et al., A novel bifunctional organophosphorus monomer for metal ion-imprinted polymers by surface template polymerization.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 25-25, (1997)
   

imprint molecule

Mosbach K et al., Some new developments and challenges in non-covalent molecular imprinting technology.
Journal of Molecular Recognition, 11, (1-6), 62-68, (1998)
   

imprint molecule

Schweitz L et al., Molecular imprint-based stationary phases for capillary electrochromatography.
Journal of Chromatography A, 817, (1-2), 5-13, (1998)
   

imprint molecule

Suedee R et al., Thin-layer chromatography using synthetic polymers imprinted with quinine as chiral stationary phase.
Jpc-Journal Of Planar Chromatography-Modern Tlc, 11, 272-276, (1998)
   

imprint molecule

Yoshida M et al., Metal ion imprinted microsphere prepared by surface molecular imprinting technique using water-in-oil-in-water emulsions.
Journal of Applied Polymer Science, 73, (7), 1223-1230, (1999)
   

imprint molecule

Katz A et al., Molecular imprinting of bulk, microporous silica.
Nature, 403, (6767), 286-289, (2000)
   

imprint molecule

Markowitz MA et al., Catalytic silica particles via template-directed molecular imprinting.
Langmuir, 16, (4), 1759-1765, (2000)
   

imprint molecule

Martin P et al., Optimisation of procedures for the extraction of structural analogues of propranolol with molecular imprinted polymers for sample preparation.
Journal of Chromatography A, 889, (1-2), 143-147, (2000)
   

imprint molecule

Suedee R et al., Evaluation of matrices containing molecularly imprinted polymers in the enantioselective-controlled delivery of b-blockers.
Journal of Controlled Release, 66, (2-3), 135-147, (2000)
   

imprint molecule

Yoshida M et al., Metal-imprinted microsphere prepared by surface template polymerization and its application to chromatography.
Journal of Polymer Science Part A: Polymer Chemistry, 38, (4), 689-696, (2000)
   

imprint molecule

Markowitz MA et al., Surface-imprinted silica particles: the effects of added organosilanes on catalytic activity.
Analytica Chimica Acta, 435, (1), 177-185, (2001)
   

imprint molecule

Martin PD et al., An unexpected selectivity of a propranolol-derived molecular imprint for tamoxifen.
Analyst, 126, (6), 757-759, (2001)
   

imprint molecule

Yoshikawa M et al., Recognition and selective transport of nucleic acid components through molecularly imprinted polymeric membranes.
Macromolecular Materials And Engineering, 286, (1), 52-59, (2001)
   

imprint molecule

Proceeding, Kamiya Y et al, Optical resolution of chrysanthemic acid derivatives on cellulose and amylose columns, 
In: Polymer Preprints, Japan, 
1513, (2002)
   

imprint molecule

Tsunemori H et al., Surface imprinting polymers for the recognition of nucleotides.
Bioseparation, 10, (6), 315-321, (2002)
   

imprint molecule

Fishman A et al., Bio-imprinting of lipases with fatty acids.
Journal of Molecular Catalysis B: Enzymatic, 22, (3-4), 193-202, (2003)
   

imprint molecule

Motherwell WB et al., A study of some molecularly imprinted polymers as protic catalysts for the isomerisation of a-pinene oxide to trans-carveol.
Tetrahedron, 60, (14), 3231-3241, (2004)
   

imprint molecule

Zimmerman SC et al., Synthetic hosts via molecular imprinting - are universal synthetic antibodies realistically possible?
Chemical Communications, (1), 5-14, (2004)
   

imprintogen

Sun BW et al., Relationship between template structure and its imprinting efficiency.
Acta Chimica Sinica, 61, (6), 878-884, (2003)
   

imprintogenicity

Sun BW et al., Relationship between template structure and its imprinting efficiency.
Acta Chimica Sinica, 61, (6), 878-884, (2003)
   

imprintogenicity

Yang ML et al., Molecular imprinting mechanism study with benzoic acid and ethyl benzoate analogues as templates.
Chemical Journal of Chinese Universities, 25, (6), 1034-1036, (2004)
   

imprint sites

Polyakova IV et al., Polymer sorbent with the properties of an artificial cholesterol receptor.
Russian Journal of Physical Chemistry A, 89, (2), 288-290, (2015)
   

IMPROVED ACCESSIBILITY

Lele BS et al., Molecularly imprinted polymer mimics of chymotrypsin - 2. Functional monomers and hydrolytic activity.
Reactive and Functional Polymers, 40, (3), 215-229, (1999)
   

Improved dispersity

Sun XY et al., Boronate-affinity based magnetic molecularly imprinted nanoparticles for the efficient extraction of the model glycoprotein horseradish peroxidase.
Microchimica Acta, 184, (10), 3729-3737, (2017)
   

Improved photocatalytic activity

Lu ZY et al., Facile microwave synthesis of a Z-scheme imprinted ZnFe2O4/Ag/PEDOT with the specific recognition ability towards improving photocatalytic activity and selectivity for tetracycline.
Chemical Engineering Journal, 337, 228-241, (2018)
   

Improvised explosive devices

Proceeding, Mamo SK et al, Optimisation and production of a molecular-imprinted-polymer for the electrochemical determination of triacetone triperoxide (TATP), 
Burgess D, Owen G, Rana H, Zamboni R, Kajzar F, Szep AA (Eds.), 
925315, (2014)
   

Improvised explosives

Brown KE et al., Advances in explosives analysis-part I: animal, chemical, ion, and mechanical methods.
Analytical and Bioanalytical Chemistry, 408, (1), 35-47, (2016)
   

Impulse control disorders

Naklua W et al., An imprinted dopamine receptor for discovery of highly potent and selective D3 analogues with neuroprotective effects.
Process Biochemistry, 50, (10), 1537-1556, (2015)
   

IMS technique

Zargar T et al., Molecularly imprinted graphite spray ionization-ion mobility spectrometry: application to trace analysis of the pesticide propoxur.
Microchimica Acta, 186, (7), Article396-(2019)
   

In-alizarin red complex

Zhang LM et al., Highly Selective Molecularly Imprinted Polymer Sensor for Indium Detection Based on Recognition of In-Alizarin Complexes.
Electroanalysis, 27, (7), 1758-1765, (2015)
   

In-capillary sample preconcentration

Guijarro-Díez M et al., Molecularly imprinted SPE and MEKC with in-capillary sample preconcentration for the determination of digoxin in human urine.
Electrophoresis, 33, (11), 1582-1588, (2012)
   

In-cell clean up

Mokgadi J et al., Pressurized hot water extraction coupled to molecularly imprinted polymers for simultaneous extraction and clean-up of pesticides residues in edible and medicinal plants of the Okavango Delta, Botswana.
Molecular Imprinting, 1, (1), 55-64, (2013)
   

INCLUSION

Book chapter, Favre-Reguillon Aet al., Caesium-selective imprinted phenolic resins, 
In: Molecular Recognition and Inclusion, Coleman AW (Ed.) 
Kluwer Academic Publishers: Dordrecht, 329-332, (1998)    

INCLUSION

Book chapter, Asanuma Het al., Molecularly imprinted cyclodextrin polymers as artificial receptors - The requisites for remarkable imprinting, 
In: Proceedings of the 9th International Symposium on Cyclodextrins, Labandeira JJT, Vila-Jato JL (Eds.) 
Kluwer Academic Publishers: Dordrecht, 235-238, (1999)    

INCLUSION

Haupt K et al., Imprinted polymer-based enantioselective acoustic sensor using a quartz crystal microbalance.
Analytical Communications, 36, (12), 391-393, (1999)
   

INCLUSION

Book chapter, Tanabe Tet al., Molecular imprinting system using cyclodextrin, 
In: Proceedings of the 9th International Symposium on Cyclodextrins, Labandeira JJT, Vila-Jato JL (Eds.) 
Kluwer Academic Publishers: Dordrecht, 517-520, (1999)    

INCLUSION

Dickert FL et al., Double molecular imprinting - a new sensor concept for improving selectivity in the detection of polycyclic aromatic hydrocarbons (PAHs) in water.
Fresenius Journal of Analytical Chemistry, 371, (1), 11-15, (2001)
   

INCLUSION

Ichinose I et al., Wrapping and inclusion of organic molecules with ultrathin, amorphous metal oxide films.
Chemical Record, 2, (5), 339-351, (2002)
   

INCLUSION

Proceeding, Kanekiyo Y et al, Endocrine disruptor-responsive QCM sensors constructed using molecularly imprinted amylose as sensing elements, 
In: Polymer Preprints, Japan, 
1661, (2002)
   

INCLUSION

Kitano H et al., Inclusion of bisphenols by a self-assembled monolayer of thiolated cyclodextrin on a gold electrode.
Langmuir, 18, (15), 5835-5840, (2002)
   

INCLUSION

Wulff G et al., Stoichiometric noncovalent interaction in molecular imprinting.
Bioseparation, 10, (6), 257-276, (2002)
   

INCLUSION

Schmiesing CS et al., Electrochemically assisted solid phase micro-extraction using L-dopa imprinted conducting polymer electrode fibers: Structural aspects.
Abstracts of Papers of the American Chemical Society, 225, (ANYL), 098-098, (2003)
   

INCLUSION

Asanuma H et al., Efficient separation of hydrophobic molecules by molecularly imprinted cyclodextrin polymers.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 50, (1-2), 51-55, (2004)
   

INCLUSION

Chmurski K et al., Measurement of ibuprofen binding to mixed monolayers containing b-cyclodextrin active sites.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 49, (1-2), 187-191, (2004)
   

INCLUSION

Gorbatchuk VV et al., Biomimetic cooperative interactions of dried cross-linked poly(N-6-aminohexylacrylamide) with binary mixtures of solvent vapors.
Biomacromolecules, 5, (4), 1615-1623, (2004)
   

Inclusion complex

Surikumaran H et al., Synthesis and evaluation of methacrylic acid functionalized β-cyclodextrin based molecular imprinted polymer for 2,4-dichlorophenol in water samples.
Desalination and Water Treatment, 57, (1), 254-267, (2016)
   

Inclusion complex

Cheng Y et al., A molecularly imprinted polymer synthesized using β-cyclodextrin as the monomer for the efficient recognition of forchlorfenuron in fruits.
Analytical and Bioanalytical Chemistry, 409, (21), 5065-5072, (2017)
   

inclusion complexes

Wulff G et al., Helical amylose complexes with organic complexands .1. Microcalorimetric and circular dichroitic investigations.
Makromolekulare Chemie-Macromolecular Chemistry And Physics, 193, (5), 1071-1080, (1992)
   

inclusion complexes

Kubik S et al., Characterization and chemical modification of amylose complexes.
Starch-Stärke, 45, (6), 220-225, (1993)
   

inclusion complexes

Book chapter, Tanabe Tet al., Molecular imprinting system using cyclodextrin, 
In: Proceedings of the 9th International Symposium on Cyclodextrins, Labandeira JJT, Vila-Jato JL (Eds.) 
Kluwer Academic Publishers: Dordrecht, 517-520, (1999)    

inclusion complexes

Proceeding, Kanekiyo Y et al, Endocrine disruptor-responsive QCM sensors constructed using molecularly imprinted amylose as sensing elements, 
In: Polymer Preprints, Japan, 
1661, (2002)
   

inclusion complexes

Folch-Cano C et al., Inclusion and Functionalization of Polymers with Cyclodextrins: Current Applications and Future Prospects.
Molecules, 19, (9), 14066-14079, (2014)
   

inclusion complexes

Lay S et al., State-of-the-art applications of cyclodextrins as functional monomers in molecular imprinting techniques: a review.
Journal of Separation Science, 39, (12), 2321-2331, (2016)
   

INCLUSION-COMPOUNDS

Wulff G et al., Helical amylose complexes with organic-compounds .2. Circular-dichroism and ultraviolet spectroscopy of complexes of amylose.
Carbohydrate Research, 237, (1), 1-10, (1992)
   

inclusion compounds

Kanekiyo Y et al., pH-responsive molecularly imprinted polymers.
Angewandte Chemie International Edition, 42, (26), 3014-3016, (2003)
   

inclusion compounds

Chiriac AP et al., Semi-imprinting Quercetin into Poly[N,N-Dimethylacrylamide-co-3, 9-divinyl-2, 4, 8, 10-Tetraoxaspiro (5.5) Undecane] Network: Evaluation of the Antioxidant Character.
Journal of Pharmaceutical Sciences, 103, (8), 2338-2346, (2014)
   

inclusion compounds

Trotta F et al., Molecularly imprinted cyclodextrin nanosponges for the controlled delivery of L-DOPA: perspectives for the treatment of Parkinson’s disease.
Expert Opinion on Drug Delivery, 13, (12), 1671-1680, (2016)
   

INCLUSION CRYSTAL

Brunet E, Asymmetric induction under confinement.
Chirality, 14, (2-3), 135-143, (2002)
   

Inclusions

Das PS et al., Contact lenses: A development towards ocular drug delivery system.
World Journal of Pharmaceuticla Research, 6, (9), 207-216, (2017)
   

In-column

Zhuang Y et al., In situ synthesis of molecularly imprinted polymers on glass microspheres in a column.
Analytical and Bioanalytical Chemistry, 389, (4), 1177-1183, (2007)
   

INCORPORATING CHIRAL SELECTORS

Fujimoto C, Enantiomer separation by capillary electrochromatography using fritless packed columns.
Analytical Sciences, 18, (1), 19-25, (2002)
   

INCREASE

Kabanov VA et al., Complex-forming polymeric sorbents with macromolecular arrangement favourable for ion sorption.
Journal of Applied Polymer Science, 24, (1), 259-267, (1979)
   

INCREASE

Lauer M et al., On the chemistry of binding-sites, 4. On an unusual increase in reactivity of arylboronic acids by neighboring groups.
Chemische Berichte-Recueil, 118, 246-260, (1985)
   

INCREASE

Shirai M et al., Cation binding-properties of polyesters with photodimerizable groups and oxyethylene units - Effect of photo-cross-linking with template cations.
European Polymer Journal, 21, (12), 999-1003, (1985)
   

INCREASE

Sarhan A et al., Racemic-resolution of mandelic-acid on polymers with chiral cavities .3. Co-operative binding over phenylboronic acid groups and N-bases.
Reactive Polymers, 11, (1), 57-70, (1989)
   

INCREASE

Kriegel T et al., Yeast phosphofructokinase - kinetic characterization of a substrate-imprinted enzyme conformation.
Biomedica Biochimica Acta, 50, (12), 1159-1165, (1991)
   

INCREASE

Chanda M et al., Enhanced copper selectivity and faster sorption kinetics of poly(4-vinylpyridine) crosslinked in presence of copper(II) as template on silica gel.
Reactive Polymers, 16, (2), 149-158, (1992)
   

INCREASE

Weatherhead RH et al., Polyethyleneimine derivatives as catalysts - dye-binding capacity and reactivity are not diminished on extensive internal cross-linking of the polymers.
Journal of Molecular Catalysis, 85, (1), 33-44, (1993)
   

INCREASE

Johansson A et al., Horse liver alcohol-dehydrogenase can accept NADP+ as coenzyme in high-concentrations of acetonitrile.
European Journal of Biochemistry, 227, (1-2), 551-555, (1995)
   

INCREASE

Lye GJ et al., Application of in situ product-removal techniques to biocatalytic processes.
Trends In Biotechnology, 17, (10), 395-402, (1999)
   

INCREASE

Lee D et al., Enhancing the enantioselectivity of lipase in transesterification by substrate matching: An enzyme memory based approach.
Organic Letters, 2, (16), 2553-2555, (2000)
   

INCREASE

Book chapter, Theodoridis G, Molecularly imprinted polymers for affinity chromatography, 
In: Encyclopedia of Chromatography, Cazes J (Ed.) 
Marcel Dekker: New York, 1-6, (2001)    

INCREASE

Proceeding, Ito K, Conformational memory in heteropolymer gel by molecular imprinting, 
In: Polymer Preprints, Japan, 
1290, (2002)
   

INCREASE

Deore B et al., Saccharide imprinting of poly(aniline boronic acid) in the presence of fluoride.
Analyst, 128, (6), 803-806, (2003)
   

INCREASE

Le Fur E et al., Excavations in molecular crystals.
Chemical Communications, (24), 2966-2967, (2003)
   

INCREASE

Leung MKP et al., Molecular sensing of 3-chloro-1,2-propanediol by molecular imprinting.
Analytica Chimica Acta, 491, (1), 15-25, (2003)
   

INCREASE

Shimizu KD, Understanding the fundamental recognition behavior of molecularly imprinted polymers.
Abstracts of Papers of the American Chemical Society, 226, (POLY), 519-519, (2003)
   

INCREASE

Cai WS et al., Molecularly-imprinted polymers selective for tetracycline binding.
Separation and Purification Technology, 35, (3), 215-221, (2004)
   

INCREASE

Dickert FL et al., Modifying polymers by self-organisation for the mass-sensitive detection of environmental and biogeneous analytes.
Sensors and Actuators B: Chemical, 100, (1-2), 112-116, (2004)
   

INCREASE

Dickert FL et al., QCM array for on-line-monitoring of composting procedures.
Analyst, 129, (5), 432-437, (2004)
   

INCREASE

Gorbatchuk VV et al., Biomimetic cooperative interactions of dried cross-linked poly(N-6-aminohexylacrylamide) with binary mixtures of solvent vapors.
Biomacromolecules, 5, (4), 1615-1623, (2004)
   

INCREASE

Guihen E et al., Recent highlights in stationary phase design for open-tubular capillary electrochromatography.
Journal of Chromatography A, 1044, (1-2), 67-81, (2004)
   

INCREASE

Hiratani H et al., The nature of backbone monomers determines the performance of imprinted soft contact lenses as timolol drug delivery systems.
Biomaterials, 25, (6), 1105-1113, (2004)
   

INCREASE

Jin Y et al., Separation characteristics of mixed-template imprinted polymer.
Korean Chemical Engineering Research, 42, (4), 413-419, (2004)
   

INCREASE

Kornysova O et al., A simplified synthesis of polymeric nonparticulate stationary phases with macrocyclic antibiotic as chiral selector for capillary electrochromatography.
Electrophoresis, 25, (16), 2825-2829, (2004)
   

INCREASE

Lieberzeit PA et al., From nanopatterning to functionality - surface and bulk imprinting for analytical purposes.
Supperlattices and Microstructures, 36, (1-3), 133-142, (2004)
   

INCREASE

Liu YW et al., Solid-phase extraction and preconcentration of cadmium(II) in aqueous solution with Cd(II)-imprinted resin (poly-Cd(II)-DAAB-VP) packed columns.
Analytica Chimica Acta, 519, (2), 173-179, (2004)
   

INCREASE

Say R et al., Selective separation and preconcentration of cyanide by a column packed with cyanide-imprinted polymeric microbeads.
Separation and Purification Technology, 40, (1), 9-14, (2004)
   

INCREASE

Suedee R et al., Use of molecularly imprinted polymers from a mixture of tetracycline and its degradation products to produce affinity membranes for the removal of tetracycline from water.
Journal of Chromatography B, 811, (2), 191-200, (2004)
   

INCREASE

Uezu K et al., Lanthanoid element recognition on surface-imprinted polymers containing dioleylphosphoric acid as a functional host.
Analytical Sciences, 20, (11), 1593-1597, (2004)
   

increased active area

Dong LN et al., Improved chiral electrochemical recognition of tryptophan enantiomers based on three-dimensional molecularly imprinted overoxidized polypyrrole/MnO2/carbon felt composites.
Chirality, 31, (11), 917-922, (2019)
   

Indapamide

Nie F et al., Chemiluminescence determination of indapamide using indapamide-imprinted polymer as recognition material.
Analytica Chimica Acta, 545, (2), 129-136, (2005)
   

Indapamide

Yilmaz H et al., Preconcentration of indapamide from human urine using molecularly imprinted solid-phase extraction.
Journal of Separation Science, 38, (17), 3090-3095, (2015)
   

Indeno[1 2 3-cd]pyrene

Ncube S et al., Synthesis and characterization of a molecularly imprinted polymer for the isolation of the 16 US-EPA priority polycyclic aromatic hydrocarbons (PAHs) in solution.
Journal of Environmental Management, 199, 192-200, (2017)
   

Indicator Chemistry

Mohr GJ, Covalent bond formation as an analytical tool to optically detect neutral and anionic analytes.
Sensors and Actuators B: Chemical, 107, (1), 2-13, (2005)
   

indicator displacement assay

Wu P et al., Exploration of Displacement Reaction/Sorption Strategies in Spectrometric Analysis.
Applied Spectroscopy Reviews, 48, (8), 629-653, (2013)
   

Indicators

Nguyen BT et al., Indicator-displacement assays.
Coordination Chemistry Reviews, 250, (23-24), 3118-3127, (2006)
   

In-diffusion

Liu PX et al., Two different states conversion mechanism of the imprinting sites.
Journal of Colloid and Interface Science, 539, 235-244, (2019)
   

Indirect electrochemical detection

Mazzotta E et al., Solid-phase synthesis of electroactive nanoparticles of molecularly imprinted polymers. A novel platform for indirect electrochemical sensing applications.
Sensors and Actuators B: Chemical, 229, 174-180, (2016)
   

Indirect fluorescence detection

Fang M et al., Rapid, simple and selective determination of 2,4-dinitrophenol by molecularly imprinted spin column extraction coupled with fluorescence detection.
Chinese Chemical Letters, 25, (11), 1492-1494, (2014)
   

Indirect inhibitive immunoassay

Tang PP et al., A novel indirect inhibitive immunoassay for sulfamethoxazole.
Chinese Chemical Letters, 21, (8), 955-958, (2010)
   

Indium-doped tin oxide

Chuang SW et al., Electrochemical characterisation of a conductive polymer molecularly imprinted with an Amadori compound.
Biosensors and Bioelectronics, 24, (10), 3170-3173, (2009)
   

Indium (III)

Li M et al., Synthesis and application of a surface-grafted In (III) ion-imprinted polymer for selective separation and pre-concentration of indium (III) ion from aqueous solution.
Hydrometallurgy, 154, 63-71, (2015)
   

Indium(III)

Li M et al., A novel In(III) ion-imprinted polymer (IIP) for selective extraction of In(III) ions from aqueous solutions.
Hydrometallurgy, 176, 243-252, (2018)
   

Indium ion

Zhang LM et al., Highly Selective Molecularly Imprinted Polymer Sensor for Indium Detection Based on Recognition of In-Alizarin Complexes.
Electroanalysis, 27, (7), 1758-1765, (2015)
   

Indium tin oxide

Kindschy LM et al., A molecularly imprinted polymer on indium tin oxide and silicon.
Biosensors and Bioelectronics, 20, (10), 2163-2167, (2005)
   

Indium tin oxide

Kindschy LM et al., Development of a molecularly imprinted biomimetic electrode.
Sensors, 7, (8), 1630-1642, (2007)
   

Indium tin oxide

Xu JM et al., A molecularly imprinted polypyrrole for ultrasensitive voltammetric determination of glyphosate.
Microchimica Acta, 184, (7), 1959-1967, (2017)
   

Indium tin oxide electrode

Xiang HY et al., Electrochemical Sensor for trans-Resveratrol Determination Based on Indium Tin Oxide Electrode Modified with Molecularly Imprinted Self-Assembled Films.
Electroanalysis, 21, (10), 1207-1210, (2009)
   

Indole

Yang WM et al., Core-Shell Magnetic Molecularly Imprinted Polymer Prepared for Selectively Removed Indole from Fuel Oil.
Advances in Polymer Technology, 36, (2), 168-176, (2017)
   

indoleacetic acid

Kugimiya A et al., Application of indoleacetic acid-imprinted polymer to solid phase extraction.
Analytica Chimica Acta, 395, (3), 251-255, (1999)
   

indoleacetic acid

Kugimiya A et al., Molecular recognition by indoleacetic acid-imprinted polymers - effects of 2-hydroxyethyl methacrylate content.
Analytical and Bioanalytical Chemistry, 372, (2), 305-307, (2002)
   

3-Indoleacetic acid

Zhang TL et al., Influence of Properties of Indole-3-Carboxylic Acids on Their Molecular Imprinting Efficiency.
Chinese Journal of Analytical Chemistry, 38, (4), 593-597, (2010)
   

Indole-3-acetic acid

Zhang Y et al., Preparation of magnetic indole-3-acetic acid imprinted polymer beads with 4-vinylpyridine and β-cyclodextrin as binary monomer via microwave heating initiated polymerization and their application to trace analysis of auxins in plant tissues.
Journal of Chromatography A, 1217, (47), 7337-7344, (2010)
   

Indole-3-acetic acid

Gong QQ et al., Electrochemical Sensor for Indole-3-Acetic Acid Based on Molecularly Imprinted Polymers.
Journal of Analytical Science, 27, (5), 556-560, (2011)
   

3-Indole acetic acid

Hu YL et al., Development of sample preparation method for auxin analysis in plants by vacuum microwave-assisted extraction combined with molecularly imprinted clean-up procedure.
Analytical and Bioanalytical Chemistry, 399, (10), 3367-3374, (2011)
   

3-Indoleacetic acid

Li JP et al., A sensitive electrochemical molecularly imprinted sensor based on catalytic amplification by silver nanoparticles for 3-indoleacetic acid determination.
Sensors and Actuators B: Chemical, 197, 109-115, (2014)
   

Indole-3-acetic acid

Campanella B et al., New polymeric sorbent for the solid-phase extraction of indole-3-acetic acid from plants followed by liquid chromatography - Fluorescence detector.
Microchemical Journal, 128, 68-74, (2016)
   

Indole-3-acetic acid

Li ZY et al., Preparation of a new cellulose magnetic molecularly imprinted polymer micro-spheres to extract and analyze the indole-3-acetic acid in plant tissues.
Journal of Chromatography B, 1092, 343-349, (2018)
   

Indole-3-acetic acid

Feier B et al., Electrochemical Sensor Based on Molecularly Imprinted Polymer for the Detection of Cefalexin.
Biosensors, 9, (1), ArticleNo31-(2019)
   

indole-3-acetic acid (IAA)

Zhang TL et al., Preparation of Indole-3-acetic Acid-imprinted Polymer Particulates by Precipitation Polymerization and Their Application in Solid Phase Extraction.
Journal of Instrumental Analysis, 35, (8), 962-967, (2016)
   

Indole alkaloids

Lopez C et al., Synthesis and study of a molecularly imprinted polymer for the specific extraction of indole alkaloids from Catharanthus roseus extracts.
Analytica Chimica Acta, 683, (2), 198-205, (2011)
   

3-Indolebutyric acid

Li SS et al., Preparation of a multi-hollow magnetic molecularly imprinted polymer for the selective enrichment of indolebutyric acid.
Journal of Separation Science, 38, (15), 2573-2579, (2015)
   

indole-3-butyric acid

Chang JH et al., A Simple and Selective Fluorescent Sensor Chip for Indole-3-Butyric Acid in Mung Bean Sprouts Based on Molecularly Imprinted Polymer Coatings.
Sensors, 17, (9), ArticleNo1954-(2017)
   

Indole-6-carboxylic acid

Shi L et al., One-step Synthesis of Ultrasmall Platinum Nanoparticles Supported on Amino-Functionalized Graphene to Create an Electrochemical Molecularly Imprinted Polymer Sensor for Fluxapyroxad.
International Journal of Electrochemical Science, 16, Article210767-(2021)
   

Indole derivatives

Porobic I et al., Molecular Recognition of Indole Derivatives by Polymers Imprinted With Indole-3-Acetic Acid: A QSPR Study.
Bioorganic & Medicinal Chemistry, 21, 653-659, (2013)
   

3-Indolepropionic acid

Zhang TL et al., Influence of Properties of Indole-3-Carboxylic Acids on Their Molecular Imprinting Efficiency.
Chinese Journal of Analytical Chemistry, 38, (4), 593-597, (2010)
   

3-Indolybutyric acid

Zhang TL et al., Influence of Properties of Indole-3-Carboxylic Acids on Their Molecular Imprinting Efficiency.
Chinese Journal of Analytical Chemistry, 38, (4), 593-597, (2010)
   

indometacin

Lai JP et al., Preparation of molecularly imprinted microspheres against acidic indometacin and its chromatographic characterization by aqueous micro-suspension polymerization.
Chemical Journal of Chinese Universities, 24, (7), 1175-1179, (2003)
   

indomethacin

Nie F et al., Determination of indomethacin in urine using molecule imprinting-chemiluminescence method.
Talanta, 66, (3), 728-733, (2005)
   

indomethacin

Wei S et al., Development of gold-nanoparticles embedded molecularly imprinted polymers for solid phase extraction of indomethacin.
Chemical Research and Application, 22, (3), 293-296, (2010)
   

indomethacin

Proceeding, Tan ZD, Indomethacin Molecular Imprinted Polymer Preparation, Characterization of Application, 
In: Advanced Materials Research, Shi JM, Dong JH, Ma W (Eds.), 
785-789, (2012)
   

indomethacin

Asiabi H et al., Preparation and evaluation of a novel molecularly imprinted polymer coating for selective extraction of indomethacin from biological samples by electrochemically controlled in-tube solid phase microextraction.
Analytica Chimica Acta, 913, 76-85, (2016)
   

indomethacin

Samah NA et al., Modelling the Diclofenac and Indomethacin Recovery by Molecularly Imprinted Polymer.
Journal of Physical Science, 29, (Suppl.1), 67-74, (2018)
   

Indomethacin (IDM)

Yang T et al., Development of a selective molecularly imprinted polymer-based solid-phase extraction for indomethacin from water samples.
Analytical and Bioanalytical Chemistry, 391, (8), 2905-2914, (2008)
   

Indoor air quality

Chen C et al., A new sensor for the assessment of personal exposure to volatile organic compounds.
Atmospheric Environment, 54, (1), 679-687, (2012)
   

Indoxacarb

Shirani MP et al., Development of an eco-friendly fluorescence nanosensor based on molecularly imprinted polymer on silica-carbon quantum dot for the rapid indoxacarb detection.
Food Chemistry, 339, Article127920-(2021)
   

Induced crystallization

Zhang WC et al., Molecularly imprinted polymers prepared by precipitation polymerization and used for inducing crystallization of oleanolic acid in supercritical CO2.
Separation and Purification Technology, 81, (3), 411-417, (2011)
   

induced fit

Feng RT et al., Review on enzyme mimics.
Chinese Journal of Organic Chemistry, 23, (8), 893-899, (2003)
   

induced fit

Lei W et al., ’’Induced fit’’ recognition of proteins by surface imprinted silica with ’’soft’’ recognition sites.
Talanta, 99, 966-971, (2012)
   

INDUCED FLUORESCENCE DETECTION

Appelblad P et al., Separation and detection of neuroactive steroids from biological matrices.
Journal of Chromatography A, 955, (2), 151-182, (2002)
   

INDUCED FLUORESCENCE DETECTION

Kist TBL et al., Separation of biomolecules using electrophoresis and nanostructures.
Electrophoresis, 25, (21-22), 3492-3497, (2004)
   

INDUCED MODULATION

Lemay P, The use of high pressure for separation and production of bioactive molecules.
Biochimica et Biophysica Acta - Protein Structure and Molecular Enzymology, 1595, (1-2), 357-366, (2002)
   

induced pluripotent stem cells

Abadi PPSS et al., Engineering of Mature Human Induced Pluripotent Stem Cell-Derived Cardiomyocytes Using Substrates with Multiscale Topography.
Advanced Functional Materials, 28, (19), ArticleNo1707378-(2018)
   

Inducing crystallization

Zhang WC et al., Preparation of Molecularly Imprinted Composite Membranes for Inducing Bergenin Crystallization in Supercritical CO2 and Adsorption Properties.
Bulletin of the Korean Chemical Society, 33, (2), 703-706, (2012)
   

induction

Calmes M et al., Supramolecular asymmetric induction : A new concept applied to the supported enantioselective synthesis of a-amino acids.
Tetrahedron, 46, (17), 6021-6032, (1990)
   

induction

Mingarro I et al., Interfacial activation-based molecular bioimprinting of lipolytic enzymes.
Proceedings of the National Academy of Sciences of the United States of America, 92, (8), 3308-3312, (1995)
   

induction

Huc I et al., Virtual combinatorial libraries: Dynamic generation of molecular and supramolecular diversity by self-assembly.
Proceedings of the National Academy of Sciences of the United States of America, 94, (6), 2106-2110, (1997)
   

induction

Slade CJ et al., Induction of catalytic activity in proteins by lyophilization in the presence of a transition state analogue.
Biotechnology and Bioengineering, 57, (2), 211-215, (1998)
   

induction

Steinke JHG et al., A simple polymerisable carboxylic acid receptor: 2-acrylamido pyridine.
TrAC Trends in Analytical Chemistry, 18, (3), 159-164, (1999)
   

induction

Brunet E, Asymmetric induction under confinement.
Chirality, 14, (2-3), 135-143, (2002)
   

induction

Matsui J et al., Molecular imprinting in alcohols: utility of a pre-polymer based strategy for synthesizing stereoselective artificial receptor polymers in hydrophilic media.
Analytica Chimica Acta, 466, (1), 11-15, (2002)
   

induction

Hayden O et al., Mass-sensitive detection of cells, viruses and enzymes with artificial receptors.
Sensors and Actuators B: Chemical, 91, (1-3), 316-319, (2003)
   

induction

Sun Y et al., Synthesis of Norfloxacin-Zinc (II) Imprinted Polymer by Precipitation Polymerization and Study on Its Imprinting Form.
Acta Chimica Sinica, 70, (14), 1569-1575, (2012)
   

Inductively coupled optical emission spectroscopy

Yilmaz V et al., Selective solid phase extraction of copper using a new Cu(II)-imprinted polymer and determination by inductively coupled plasma optical emission spectroscopy (ICP-OES).
Microchemical Journal, 114, 65-72, (2014)
   

INDUCTIVELY-COUPLED PLASMA

Shepherd RE, Chromatographic and related electrophoretic methods in the separation of transition metal complexes or their ligands.
Coordination Chemistry Reviews, 247, (1-2), 147-184, (2003)
   

Inductively coupled plasma atomic emission spectrometry

He Q et al., Synthesis and applications of surface-grafted Th(IV)-imprinted polymers for selective solid-phase extraction of thorium(IV).
Analytica Chimica Acta, 605, (2), 192-197, (2007)
   

Inductively coupled plasma-atomic emission spectrometry

Shamsipur M et al., A stoichiometric imprinted chelating resin for selective recognition of copper(II) ions in aqueous media.
Analytica Chimica Acta, 599, (2), 294-301, (2007)
   

Inductively coupled plasma atomic emission spectrometry

Zhai YH et al., Selective solid-phase extraction of trace cadmium(II) with an ionic imprinted polymer prepared from a dual-ligand monomer.
Analytica Chimica Acta, 593, (1), 123-128, (2007)
   

Inductively coupled plasma-atomic emission spectrometry

Zhang N et al., A new ion-imprinted silica gel sorbent for on-line selective solid-phase extraction of dysprosium(III) with detection by inductively coupled plasma-atomic emission spectrometry.
Analytica Chimica Acta, 597, (1), 12-18, (2007)
   

Inductively coupled plasma atomic emission spectrometry

Wang LL et al., Synthesis, characterization and adsorption behavior of Pb2+ - Imprinted polymer in aqueous solution.
Chinese Journal of Analytical Chemistry, 37, (4), 537-542, (2009)
   

Inductively coupled plasma-atomic emission spectrometry

Shamsipur M et al., Synthesis and characterization of novel ion-imprinted polymeric nanoparticles for very fast and highly selective recognition of copper(II) ions.
Talanta, 83, (2), 674-681, (2010)
   

Inductively coupled plasma atomic emission spectrometry

Wang LL et al., Study on adsorption behavior and mechanism of copper(II) ion imprinted polymer.
Metallurgical Analysis, 30, (2), 17-22, (2010)
   

Inductively coupled plasma atomic emission spectrometry

Zhang ZL et al., Analysis of Properties of Cadmium Adsorption onto Whisker Surface Ion-Imprinted Polymer by Inductively Coupled Plasma Atomic Emission Spectrometry.
Spectroscopy and Spectral Analysis, 30, (3), 792-796, (2010)
   

Inductively coupled plasma-atomic emission spectrometry

Shamsipur M et al., Synthesis of a novel nanostructured ion-imprinted polymer for very fast and highly selective recognition of copper(II) ions in aqueous media.
Reactive and Functional Polymers, 71, (2), 131-139, (2011)
   

Inductively coupled plasma atomic emission spectrometry (ICP-AES)

Jiang N et al., Selective solid-phase extraction of nickel(II) using a surface-imprinted silica gel sorbent.
Analytica Chimica Acta, 577, (2), 225-231, (2006)
   

Inductively coupled plasma atomic emission spectrometry (ICP-AES)

Li ZH et al., Synthesis and application of surface-imprinted activated carbon sorbent for solid-phase extraction and determination of copper (II).
Spectrochimica Acta Part A-Molecular and Biomolecular Spctroscopy, 117, 422-427, (2014)
   

Inductively coupled plasma-mass spectrometry

Otero-Romaní J et al., Inductively coupled plasma-optical emission spectrometry/mass spectrometry for the determination of Cu, Ni, Pb and Zn in seawater after ionic imprinted polymer based solid phase extraction.
Talanta, 79, (3), 723-729, (2009)
   

Inductively coupled plasma-mass spectrometry

Tsoi YK et al., Selective recognition of arsenic by tailoring ion-imprinted polymer for ICP-MS quantification.
Talanta, 89, (1), 162-168, (2012)
   

Inductively coupled plasma mass spectrometry

Zhang N et al., Cadmium (II) imprinted 3-mercaptopropyltrimethoxysilane coated stir bar for selective extraction of trace cadmium from environmental water samples followed by inductively coupled plasma mass spectrometry detection.
Analytica Chimica Acta, 723, (1), 54-60, (2012)
   

Inductively coupled plasma-mass spectrometry

Rodríguez-Reino MP et al., Mercury speciation in seawater by liquid chromatography-inductively coupled plasma-mass spectrometry following solid phase extraction pre-concentration by using an ionic imprinted polymer based on methyl-mercury-phenobarbital interaction.
Journal of Chromatography A, 1391, 9-17, (2015)
   

Inductively coupled plasma mass spectrometry

Yilmaz V et al., Novel Imprinted Polymer for the Preconcentration of Cadmium with Determination by Inductively Coupled Plasma Mass Spectrometry.
Analytical Letters, 50, (3), 482-499, (2017)
   

Inductively coupled plasma-mass spectrometry

Kisomi AS et al., [mu]-Thin-layer chromatography coupled with laser ablation-inductively coupled plasma-mass spectrometry using tin(II)-imprinted polymer nanoparticles as a stationary phase for speciation of tin.
Microchimica Acta, 187, (5), Article298-(2020)
   

Inductively coupled plasma-optical emission spectrometry

García-Otero N et al., On-line ionic imprinted polymer selective solid-phase extraction of nickel and lead from seawater and their determination by inductively coupled plasma-optical emission spectrometry.
Analytical and Bioanalytical Chemistry, 395, (4), 1107-1115, (2009)
   

Inductively coupled plasma-optical emission spectrometry

Otero-Romaní J et al., Inductively coupled plasma-optical emission spectrometry/mass spectrometry for the determination of Cu, Ni, Pb and Zn in seawater after ionic imprinted polymer based solid phase extraction.
Talanta, 79, (3), 723-729, (2009)
   

Inductively coupled plasma optical emission spectrometry

Ashouri N et al., Synthesis of a new ion-imprinted polymer and its characterization for the selective extraction and determination of nickel ions in aqueous solutions.
Desalination and Water Treatment, 56, (8), 2135-2144, (2015)
   

Inductively coupled plasma optical emission spectrometry

Ashouri N et al., Preparation of a new nanoparticle Cd(II)-imprinted polymer and its application for selective separation of cadmium(II) ions from aqueous solutions and determination via inductively coupled plasma optical emission spectrometry.
Desalination and Water Treatment, 57, (30), 14280-14289, (2016)
   

Inductively coupled plasma-optical emission spectrometry (ICP-OES)

Cui C et al., Restricted accessed material-copper(II) ion imprinted polymer solid phase extraction combined with inductively coupled plasma-optical emission spectrometry for the determination of free Cu(II) in urine and serum samples.
Talanta, 116, 1040-1046, (2013)
   

INDUSTRIAL BIOCATALYSIS

Fishman A et al., Bio-imprinting of lipases with fatty acids.
Journal of Molecular Catalysis B: Enzymatic, 22, (3-4), 193-202, (2003)
   

Industrial gas

Huang Y et al., Removal of Typical Industrial Gaseous Pollutants: From Carbon, Zeolite, and Metal-organic Frameworks to Molecularly Imprinted Adsorbents.
Aerosol and Air Quality Research, 19, (9), 2130-2150, (2019)
   

Industrial wastewater

Ahmed MA et al., Molecular imprinted chitosan-TiO2 nanocomposite for the selective removal of Rose Bengal from wastewater.
International Journal of Biological Macromolecules, 107, (Part A), 1046-1053, (2018)
   

Industrial water sample

Zargar B et al., Synthesis of an ion-imprinted sorbent by surface imprinting of magnetized carbon nanotubes for determination of trace amounts of cadmium ions.
Microchimica Acta, 184, (11), 4521-4529, (2017)
   

Infant complementary food

Ji YH et al., Fabrication and characterization of magnetic molecularly imprinted polymer based on deep eutectic solvent for specific recognition and quantification of vanillin in infant complementary food.
Food Chemistry, 374, Article131720-(2022)
   

Infant formula

Wang HW et al., Fabrication of a Simple and Sensitive Electrochemical Dicyandiamide Sensor Based on Molecularly Imprinted Technology.
International Journal of Electrochemical Science, 10, 8834-8843, (2015)
   

Infant formula

Osório MV et al., Fluorometric method based on molecular recognition solid-phase extraction for determination of riboflavin in milk and infant formula.
Journal of Food Composition and Analysis, 45, 141-146, (2016)
   

Infant formula

Liu HL et al., Graphene oxide-sensitized molecularly imprinted opto-polymers for charge-transfer fluorescent sensing of cyanoguanidine.
Food Chemistry, 235, 14-20, (2017)
   

Infant formula

Savoy MC et al., Determination of 14 aminoglycosides by LC-MS/MS using molecularly imprinted polymer solid phase extraction for clean-up.
Food Additives & Contaminants: Part A, 35, (4), 674-685, (2018)
   

Infant formula powder

Shao HK et al., Preparation of molecularly imprinted hybrid monoliths for the selective detection of fluoroquinolones in infant formula powders.
Journal of Chromatography A, 1588, 33-40, (2019)
   

Infected urine sample

Afkhami A et al., Fabrication of a new electrochemical sensor based on a new nano-molecularly imprinted polymer for highly selective and sensitive determination of tramadol in human urine samples.
Biosensors and Bioelectronics, 44, 34-40, (2013)
   

infection

Juric D et al., Molecular Imprinting of Cyclodextrin Supramolecular Hydrogels Improves Drug Loading and Delivery.
Macromolecular Bioscience, 19, (1), Article1800246-(2019)
   

In-field analysis

Ertürk G et al., Bacteriophages as biorecognition elements in capacitive biosensors: Phage and host bacteria detection.
Sensors and Actuators B: Chemical, 258, 535-543, (2018)
   

Inflammation

Ekdahl KN et al., Innate immunity activation on biomaterial surfaces: A mechanistic model and coping strategies.
Advanced Drug Delivery Reviews, 63, (12), 1042-1050, (2011)
   

inflammatory response

Canfarotta F et al., Biocompatibility and internalization of molecularly imprinted nanoparticles.
Nano Research, 9, (11), 3463-3477, (2016)
   

influence factors

Lai JP et al., Chromatographic characterization of molecularly imprinted microspheres synthesized by aqueous microsuspension polymerization: Influences of pH, kinds and concentration of buffer on capacity factors.
Chinese Journal of Chemistry, 20, (10), 1012-1018, (2002)
   

influence factors

Li Q et al., Study on the influence factors to the binding performance of molecular imprinted polymers.
Chemical Research and Application, 19, (5), 550-552, (2007)
   

influence factors

Jiao CC et al., Preparation and Influence Factors of Composite Molecular Imprinted Membranes.
Chemical Industry and Engineering, 27, (4), 358-364, (2010)
   

INFLUENZA VIRUS HEMAGGLUTININ

Snowden TS et al., Anion recognition: synthetic receptors for anions and their application in sensors.
Current Opinion in Chemical Biology, 3, 740-746, (1999)
   

Infrared analysis

Sreenivasan K, Synthesis and evaluation of molecularly imprinted polymers for nucleic acid bases using aniline as a monomer.
Reactive and Functional Polymers, 67, (10), 859-864, (2007)
   

Infrared spectra

Ren HP et al., Spectroscopic Study of Salbutamol Molecularly Imprinted Polymers.
Spectroscopy and Spectral Analysis, 36, (2), 372-378, (2016)
   

Infrared spectroscopy

Lattanzio VMT et al., Current analytical methods for trichothecene mycotoxins in cereals.
TrAC Trends in Analytical Chemistry, 28, (6), 758-768, (2009)
   

Infrared spectroscopy

Hasegawa T et al., Infrared spectroscopic study of molecular interaction of tacticity-controlled poly(N-isopropylacrylamide) in a cast film deposited on a solid substrate.
Analytical and Bioanalytical Chemistry, 398, (5), 2203-2209, (2010)
   

Infrared spectroscopy

Rocha FRP et al., Direct Solid-Phase Optical Measurements in Flow Systems: A Review.
Analytical Letters, 44, (1), 528-559, (2011)
   

Infrared spectroscopy

Zheng HF et al., Reduced steric hindrance and optimized spatial arrangement of carbohydrate ligands in imprinted monolayers for enhanced protein binding.
Biochimica et Biophysica Acta (BBA) - Biomembranes, 1828, (2), 792-800, (2013)
   

Infrared spectroscopy

Yu RL et al., Synthesis and adsorption properties of pyrazosulfuron-ethyl molecularly imprinted polymers.
Journal of Beijing University of Chemical Technology (Natural Science Edition), 41, (1), 46-51, (2014)
   

Infrared spectrum

Wang YR et al., Preparation and Characteristic Analysis of Ractopamine Molecularly Imprinted Polymers.
Spectroscopy and Spectral Analysis, 33, (10), 2629-2632, (2013)
   

INFUSION

van Hout MWJ et al., Ion suppression in the determination of clenbuterol in urine by solid-phase extraction atmospheric pressure chemical ionisation ion-trap mass spectrometry.
Rapid Communications In Mass Spectrometry, 17, (3), 245-250, (2003)
   

ingredient

Ma YZ et al., Advance in Extraction and Separation of Chinese Medicine Active Ingredients.
Journal of Hebei Institute of Technology, 31, (1), 99-101, (2009)
   

inhibition

Liu XC et al., Studies towards a tailor-made catalyst for the Diels-Alder reaction using the technique of molecular imprinting.
Macromolecular Rapid Communications, 18, (7), 609-615, (1997)
   

inhibition

Arora PS et al., Design and synthesis of a transition state analogue for the Diels-Alder reaction.
Bioorganic & Medicinal Chemistry, 6, (9), 1421-1428, (1998)
   

inhibition

Liu XC et al., Catalysis of benzisoxazole isomerization by molecularly imprinted polymers.
Macromolecular Rapid Communications, 19, (12), 671-674, (1998)
   

inhibition

Kawanami Y et al., Imprinted polymer catalysts for the hydrolysis of p-nitrophenyl acetate.
Journal of Molecular Catalysis A: Chemical, 145, (1-2), 107-110, (1999)
   

inhibition

Weller MG, Immunochromatographic techniques - a critical review.
Fresenius Journal of Analytical Chemistry, 366, (6-7), 635-645, (2000)
   

inhibition

Allender CJ et al., Separation of individual antiviral nucleotide prodrugs from synthetic mixtures using cross-reactivity of a molecularly imprinted stationary phase.
Analytica Chimica Acta, 435, (1), 107-113, (2001)
   

inhibition

Trojanowicz M, Determination of pesticides using electrochemical enzymatic biosensors.
Electroanalysis, 14, (19-20), 1311-1328, (2002)
   

inhibition

Bhand SG et al., Coupled biosensor, biomimetic and chemometrics strategies for analysis of the metals in complex environmental matrices.
Journal de Physique IV, 107, 169-172, (2003)
   

inhibition

Emgenbroich M et al., A new enzyme model for enantioselective esterases based on molecularly imprinted polymers.
Chemistry - A European Journal, 9, (17), 4106-4117, (2003)
   

inhibition

Liu JQ et al., Bioimprinted protein exhibits glutathione peroxidase activity.
Analytica Chimica Acta, 504, (1), 185-189, (2004)
   

inhibition

Tada M et al., Design of a novel molecular-imprinted Rh-amine complex on SiO2 and its shape-selective catalysis for a-methylstyrene hydrogenation.
Journal of Physical Chemistry B, 108, (9), 2918-2930, (2004)
   

inhibition

Takeuchi T et al., Atrazine transformation using synthetic enzymes prepared by molecular imprinting.
Organic & Biomolecular Chemistry, 2, (18), 2563-2566, (2004)
   

inhibition

Guo ZY et al., A highly sensitive electrochemiluminescence method combined with molecularly imprinted solid phase extraction for the determination of phenolphthalein in drug, slimming food and human plasma.
Food Chemistry, 132, (2), 1092-1097, (2012)
   

inhibition

Yan CR et al., Drug-based magnetic imprinted nanoparticles: Enhanced lysozyme amyloid fibrils cleansing and anti-amyloid fibrils toxicity.
International Journal of Biological Macromolecules, 153, 723-735, (2020)
   

inhibition study

Pluhar B et al., Advanced Evaluation Strategies for Protein-Imprinted Polymer Nanobeads.
Macromolecular Bioscience, 15, (11), 1507-1511, (2015)
   

inhibitor

Russell AJ et al., Inhibitor-induced enzyme activation in organic-solvents.
Journal of Biological Chemistry, 263, (24), 11624-11626, (1988)
   

inhibitor

Mingarro I et al., Interfacial activation-based molecular bioimprinting of lipolytic enzymes.
Proceedings of the National Academy of Sciences of the United States of America, 92, (8), 3308-3312, (1995)
   

inhibitor

Huc I et al., Virtual combinatorial libraries: Dynamic generation of molecular and supramolecular diversity by self-assembly.
Proceedings of the National Academy of Sciences of the United States of America, 94, (6), 2106-2110, (1997)
   

inhibitor

Stewart NAS et al., Imprinting of lyophilized a-chymotrypsin affects the reactivity of the active-site imidazole.
Biochemical and Biophysical Research Communications, 240, (1), 27-31, (1997)
   

inhibitor

Book chapter, Scheller FWet al., New recognition elements in biosensing, 
In: Enzyme Engineering XIV, Laskin AI, Li GX, Yu YT (Eds.) 
New York Academy of Sciences: New York, 37-45, (1998)    

inhibitor

O’Brien TP et al., Evaluation of the origins of the selectivity of polymers imprinted with a HIV protease inhibitor using infrared spectroscopy and high performance liquid chromatography.
Enantiomer, 7, (2-3), 139-148, (2002)
   

inhibitor

Yu YH et al., Formation of a class of enzyme inhibitors (drugs), including a chiral compound, by using imprinted polymers or biomolecules as molecular-scale reaction vessels.
Angewandte Chemie International Edition, 41, (23), 4459-4463, (2002)
   

inhibitor

Yu YH et al., Removal of the fermentation by-product succinyl L-tyrosine from the b-lactamase inhibitor clavulanic acid using a molecularly imprinted polymer.
Biotechnology and Bioengineering, 79, (1), 23-28, (2002)
   

inhibitor

Hall AJ et al., A substructure approach toward polymeric receptors targeting dihydrofolate reductase inhibitors. 2. Molecularly imprinted polymers against Z-L-glutamic acid showing affinity for larger molecules.
Journal of Organic Chemistry, 68, (23), 9132-9135, (2003)
   

inhibitor

Yilmaz E, Orlistat-induced molecular bio-imprinting of microbial lipase.
World Journal Of Microbiology & Biotechnology, 19, (2), 161-165, (2003)
   

inhibitor

Zhu LL et al., Selective separation of active inhibitors of epidermal growth factor receptor from Caragana Jubata by molecularly imprinted solid-phase extraction.
Journal of Chromatography A, 991, (2), 151-158, (2003)
   

inhibitor

Zhu LL et al., Application of a molecularly imprinted polymer for the effective recognition of different anti-epidermal growth factor receptor inhibitors.
Analytical Chemistry, 75, (23), 6381-6387, (2003)
   

inhibitor

Xu XJ et al., Separation and screening of compounds of biological origin using molecularly imprinted polymers.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 61-69, (2004)
   

inhibitor

Soldatkin AP et al., Biosensors. A quarter of a century of R&D experience.
Biopolymers and Cell, 29, (3), 188-206, (2013)
   

Inhibitor-assisted

Dinc M et al., Selective Binding of Inhibitor-Assisted Surface-Imprinted Core/Shell Microbeads in Protein Mixtures.
ChemistrySelect, 3, (16), 4277-4282, (2018)
   

INHIBITORS

Russell AJ et al., Inhibitor-induced enzyme activation in organic-solvents.
Journal of Biological Chemistry, 263, (24), 11624-11626, (1988)
   

INHIBITORS

Huc I et al., Virtual combinatorial libraries: Dynamic generation of molecular and supramolecular diversity by self-assembly.
Proceedings of the National Academy of Sciences of the United States of America, 94, (6), 2106-2110, (1997)
   

INHIBITORS

Stewart NAS et al., Imprinting of lyophilized a-chymotrypsin affects the reactivity of the active-site imidazole.
Biochemical and Biophysical Research Communications, 240, (1), 27-31, (1997)
   

INHIBITORS

Book chapter, Scheller FWet al., New recognition elements in biosensing, 
In: Enzyme Engineering XIV, Laskin AI, Li GX, Yu YT (Eds.) 
New York Academy of Sciences: New York, 37-45, (1998)    

INHIBITORS

Kraft A et al., Noncovalent interactions between acidic heterocycles and amidine bases.
Materials Science & Engineering C-Biomimetic And Supramolecular Systems, 18, (1-2), 9-13, (2001)
   

INHIBITORS

Yu YH et al., Formation of a class of enzyme inhibitors (drugs), including a chiral compound, by using imprinted polymers or biomolecules as molecular-scale reaction vessels.
Angewandte Chemie International Edition, 41, (23), 4459-4463, (2002)
   

INHIBITORS

Hall AJ et al., A substructure approach toward polymeric receptors targeting dihydrofolate reductase inhibitors. 2. Molecularly imprinted polymers against Z-L-glutamic acid showing affinity for larger molecules.
Journal of Organic Chemistry, 68, (23), 9132-9135, (2003)
   

INHIBITORS

Zhu LL et al., Selective separation of active inhibitors of epidermal growth factor receptor from Caragana Jubata by molecularly imprinted solid-phase extraction.
Journal of Chromatography A, 991, (2), 151-158, (2003)
   

INHIBITORS

Zhu LL et al., Application of a molecularly imprinted polymer for the effective recognition of different anti-epidermal growth factor receptor inhibitors.
Analytical Chemistry, 75, (23), 6381-6387, (2003)
   

INHIBITORS

Xu XJ et al., Separation and screening of compounds of biological origin using molecularly imprinted polymers.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 61-69, (2004)
   

iniferter

Hattori K et al., Gate effect of theophylline-imprinted polymers grafted to the cellulose by living radical polymerization.
Journal of Membrane Science, 233, (1-2), 169-173, (2004)
   

iniferter

Rückert B et al., Distribution of molecularly imprinted polymer layers on macroporous silica gel particles by STEM and EDX.
Micron, 36, (3), 247-260, (2005)
   

iniferter

Tamayo FG et al., Synthesis and evaluation of new propazine-imprinted polymer formats for use as stationary phases in liquid chromatography.
Analytica Chimica Acta, 542, (1), 38-46, (2005)
   

iniferter

Rong F et al., Preparation of molecularly imprinted microspheres by photo-grafting on supports modified with iniferter.
Chinese Science Bulletin, 51, (21), 2566-2571, (2006)
   

iniferter

Li BL et al., Preparation and property evaluation of molecularly imprinted polymer grafted micro-spherical resin.
Acta Chimica Sinica, 65, (10), 955-961, (2007)
   

iniferter

Oxelbark J et al., Chromatographic comparison of bupivacaine imprinted polymers prepared in crushed monolith, microsphere, silica-based composite and capillary monolith formats.
Journal of Chromatography A, 1160, (1-2), 215-226, (2007)
   

iniferter

Gai QQ et al., Preparation of bovine hemoglobin-imprinted polymer beads via photografting surface-modified method.
Chemical Journal of Chinese Universities, 29, (1), 64-70, (2008)
   

iniferter

Gai QQ et al., Preparation of bovine hemoglobin-imprinted polymer beads via the photografting surface-modified method.
Frontiers of Chemistry in China, 3, (4), 370-377, (2008)
   

iniferter

Su SF et al., HPLC determination of sulfamethazine in milk using surface-imprinted silica synthesized with iniferter technique.
Talanta, 76, (5), 1141-1146, (2008)
   

iniferter

Lee HY et al., Grafting of molecularly imprinted polymers on iniferter-modified carbon nanotube.
Biosensors and Bioelectronics, 25, (3), 587-591, (2009)
   

iniferter

Qin L et al., Surface-modified polystyrene beads as photografting imprinted polymer matrix for chromatographic separation of proteins.
Journal of Chromatography A, 1216, (5), 807-814, (2009)
   

iniferter

Barahona F et al., Chromatographic performance of molecularly imprinted polymers: Core-shell microspheres by precipitation polymerization and grafted MIP films via iniferter-modified silica beads.
Journal of Polymer Science Part A: Polymer Chemistry, 48, (5), 1058-1066, (2010)
   

iniferter

Chen RR et al., Novel surface-modified molecularly imprinted membrane prepared with iniferter for permselective separation of lysozyme.
Journal of Membrane Science, 363, (1-2), 212-220, (2010)
   

iniferter

Vaughan AD et al., Enhancing therapeutic loading and delaying transport via molecular imprinting and living/controlled polymerization.
AIChE Journal, 56, (1), 268-279, (2010)
   

iniferter

Prasad BB et al., Metal ion mediated imprinting for electrochemical enantioselective sensing of l-histidine at trace level.
Biosensors and Bioelectronics, 28, (1), 117-126, (2011)
   

iniferter

Subrahmanyam S et al., Optimization of experimental conditions for synthesis of high affinity MIP nanoparticles.
European Polymer Journal, 49, 100-105, (2013)
   

iniferter

Singh M et al., Selective recognition of fenbufen by surface-imprinted silica with iniferter technique.
Journal of Porous Materials, 21, (5), 677-684, (2014)
   

iniferter

Gutiérrez-Climente R et al., Iniferter-mediated grafting of molecularly imprinted polymers on porous silica beads for the enantiomeric resolution of drugs.
Journal of Molecular Recognition, 29, (3), 106-114, (2016)
   

iniferter

García-Mutio D et al., Controlled grafting of molecularly imprinted films on gold microelectrodes using a self-assembled thiol iniferter.
Electrochimica Acta, 279, 57-65, (2018)
   

iniferter

Kushwaha A et al., Synthesis and characterization of antipyrine-imprinted polymers and their application for sustained release.
Polymer Bulletin, 75, (11), 5235-5252, (2018)
   

iniferter

Pathak PK et al., Functionalized nitrogen doped graphene quantum dots and bimetallic Au/Ag core-shell decorated imprinted polymer for electrochemical sensing of anticancerous hydroxyurea.
Biosensors and Bioelectronics, 127, 10-18, (2019)
   

iniferter-induced living radical precipitation polymerization

Li JY et al., One-pot synthesis of surface-functionalized molecularly imprinted polymer microspheres by iniferter-induced "living" radical precipitation polymerization.
Journal of Polymer Science Part A: Polymer Chemistry, 48, (15), 3217-3228, (2010)
   

iniferter mediated polymerization

Salian VD et al., Living Radical Polymerization and Molecular Imprinting: Improving Polymer Morphology in Imprinted Polymers.
Macromolecular Materials And Engineering, 298, (4), 379-390, (2013)
   

INIFERTER-MODIFIED SUPPORTS

Rückert B et al., Molecularly imprinted composite materials via iniferter-modified supports.
Journal of Materials Chemistry, 12, (8), 2275-2280, (2002)
   

INIFERTER-MODIFIED SUPPORTS

Turiel E et al., Molecularly imprinted polymers: towards highly selective stationary phases in liquid chromatography and capillary electrophoresis.
Analytical and Bioanalytical Chemistry, 378, (8), 1876-1886, (2004)
   

Iniferter-route

Martins N et al., An emerging approach for the targeting analysis of dimethoate in olive oil: The role of molecularly imprinted polymers based on photo-iniferter induced "living" radical polymerization.
Reactive and Functional Polymers, 86, 37-46, (2015)
   

iniferters

Bonomi P et al., A New Versatile Water-Soluble Iniferter Platform for the Preparation of Molecularly Imprinted Nanoparticles by Photopolymerisation in Aqueous Media.
Chemistry - A European Journal, 22, (29), 10150-10154, (2016)
   

Iniferter technique

Xu WJ et al., Determination of sulfonamides in bovine milk with column-switching high performance liquid chromatography using surface imprinted silica with hydrophilic external layer as restricted access and selective extraction material.
Journal of Chromatography A, 1217, (46), 7198-7207, (2010)
   

initiated chemical vapor deposition (iCVD)

Ince GO et al., One-Dimensional Surface-Imprinted Polymeric Nanotubes for Specific Biorecognition by Initiated Chemical Vapor Deposition (iCVD).
ACS Applied Materials & Interfaces, 5, (14), 6447-6452, (2013)
   

Initiator

Matsui T et al., Improved Method of Molecular Imprinting of Cyclodextrin on Silica-gel Surface for the Preparation of Stable Stationary HPLC Phase.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 56, (1-2), 39-44, (2006)
   

Initiator

Mijangos I et al., Influence of initiator and different polymerisation conditions on performance of molecularly imprinted polymers.
Biosensors and Bioelectronics, 22, (3), 381-387, (2006)
   

Initiator

Liu Z et al., Preparation and affinity assessment of parathion molecularly imprinted polymers.
Polymer Materials Science and Engineering, 27, (3), 83-86+91, (2011)
   

Initiator

Asmawati et al., Synthesis And Characterization Of An Ion Imprinted Polymer For Cadmium Using Quinaldic Acid As Complexing Agent And Applying By Microwave.
International Journal of Scientific & Technology Research, 4, (1), 190-192, (2015)
   

Initiator-free polymerization

Panagiotopoulou M et al., Initiator-free synthesis of molecularly imprinted polymers by polymerization of self-initiated monomers.
Polymer, 66, 43-51, (2015)
   

INITIATORS

Guo TY et al., Chemically modified chitosan beads as molecularly imprinted polymer matrix for adsorptive separation of proteins.
Chinese Chemical Letters, 15, (11), 1339-1341, (2004)
   

INJECTION

Koide T et al., Enantiomeric separations of acidic and neutral compounds by capillary electrochromatography with b-cyclodextrin-bonded positively charged polyacrylamide gels.
HRC - Journal of High Resolution Chromatography, 23, (1), 59-66, (2000)
   

INJECTION

Schweitz L et al., Alternative methods providing enhanced sensitivity and selectivity in capillary electroseparation experiments.
Journal of Chromatography A, 892, (1-2), 203-217, (2000)
   

INJECTION

Stroink T et al., On-line sample preconcentration in capillary electrophoresis, focused on the determination of proteins and peptides.
Electrophoresis, 22, (12), 2375-2383, (2001)
   

INJECTION

Surugiu I et al., Biomimetic arrays for optical multisensing.
Abstracts of Papers of the American Chemical Society, 221, (AGRO), 60-60, (2001)
   

INJECTION

Alvarez-Lorenzo C et al., Soft contact lenses capable of sustained delivery of timolol.
Journal of Pharmaceutical Sciences, 91, (10), 2182-2192, (2002)
   

INJECTION

Hiratani H et al., Timolol uptake and release by imprinted soft contact lenses made of N,N-diethylacrylamide and methacrylic acid.
Journal of Controlled Release, 83, (2), 223-230, (2002)
   

INJECTION

Trojanowicz M, Determination of pesticides using electrochemical enzymatic biosensors.
Electroanalysis, 14, (19-20), 1311-1328, (2002)
   

INJECTION

Du JX et al., Flow injection chemiluminescence determination of epinephrine using epinephrine-imprinted polymer as recognition material.
Analytica Chimica Acta, 489, (2), 183-189, (2003)
   

INJECTION

Lai EPC et al., Molecularly imprinted solid phase extraction for rapid screening of metformin.
Microchemical Journal, 75, (3), 159-168, (2003)
   

INJECTION

Sanbe H et al., Restricted access media-molecularly imprinted polymer for propranolol and its application to direct injection analysis of b-blockers in biological fluids.
Analyst, 128, (6), 593-597, (2003)
   

INJECTION

Sanbe H et al., Preparation of uniformly sized molecularly imprinted polymers for phenolic compounds and their application to the assay of bisphenol A in river water.
Analytical Sciences, 19, (5), 715-719, (2003)
   

INJECTION

Smith RM, Before the injection - modern methods of sample preparation for separation techniques.
Journal of Chromatography A, 1000, (1-2), 3-27, (2003)
   

INJECTION

Feng SY et al., Molecularly imprinted solid-phase extraction for the screening of antihyperglycemic biguanides.
Journal of Chromatography A, 1027, (1-2), 155-160, (2004)
   

INJECTION

Theodoridis G et al., Automated sample preparation based on the sequential injection principle - Solid-phase extraction on a molecularly imprinted polymer coupled on-line to high-performance liquid chromatography.
Journal of Chromatography A, 1030, (1-2), 69-76, (2004)
   

INJECTION

Zhou SN et al., Analysis of wheat extracts for ochratoxin A by molecularly imprinted solid-phase extraction and pulsed elution.
Analytical and Bioanalytical Chemistry, 378, (8), 1903-1906, (2004)
   

INJECTION ANALYSIS

Trojanowicz M, Determination of pesticides using electrochemical enzymatic biosensors.
Electroanalysis, 14, (19-20), 1311-1328, (2002)
   

INJECTION ANALYSIS

Sanbe H et al., Restricted access media-molecularly imprinted polymer for propranolol and its application to direct injection analysis of b-blockers in biological fluids.
Analyst, 128, (6), 593-597, (2003)
   

injection methods

Theodoridis G et al., Automated sample preparation based on the sequential injection principle - Solid-phase extraction on a molecularly imprinted polymer coupled on-line to high-performance liquid chromatography.
Journal of Chromatography A, 1030, (1-2), 69-76, (2004)
   

Injector port silylation

Mudiam MKR et al., Molecularly imprinted polymer coupled with dispersive liquid-liquid microextraction and injector port silylation: A novel approach for the determination of 3-phenoxybenzoic acid in complex biological samples using gas chromatography-tandem mass spectrometry.
Journal of Chromatography B, 945-946, 23-30, (2014)
   

Injector-port silylation

Chauhan A et al., Imprinted nanospheres based on precipitation polymerization for the simultaneous extraction of six urinary benzene metabolites from urine followed by injector port silylation and gas chromatography-tandem mass spectrometric analysis.
Journal of Chromatography B, 1001, 66-74, (2015)
   

Inkjet-printed electrode

Dechtrirat D et al., A screen-printed carbon electrode modified with gold nanoparticles, poly(3,4-ethylenedioxythiophene), poly(styrene sulfonate) and a molecular imprint for voltammetric determination of nitrofurantoin.
Microchimica Acta, 185, (5), ArticleNo261-(2018)
   

InkJet printing technology

Proceeding, Cennamo N et al, A novel chemical optical sensor based on molecularly imprinted polymer, optical fibers and inkjet printing technology, 

ArticleNo8409619, (2018)
   

InkJet printing technology

Cennamo N et al., A Novel Sensing Methodology to Detect Furfural in Water, Exploiting MIPs, and Inkjet-Printed Optical Waveguides.
IEEE Transactions on Instrumentation and Measurement, 68, (5), 1582-1589, (2019)
   

in-line analyte concentration

Rocha FRP et al., Solid-phase extractions in flow analysis.
Anais da Academia Brasileira de Ciências, 90, (1 Suppl. 1), 803-824, (2018)
   

In-line concentrator

Lara FJ et al., Evaluation of a molecularly imprinted polymer as in-line concentrator in capillary electrophoresis.
Electrophoresis, 29, (18), 3834-3841, (2008)
   

In-line concentrator

Moreno-González D et al., Molecularly imprinted polymer as in-line concentrator in capillary electrophoresis coupled with mass spectrometry for the determination of quinolones in bovine milk samples.
Journal of Chromatography A, 1360, 1-8, (2014)
   

in- line preconcentration

Stroink T et al., On-line sample preconcentration in capillary electrophoresis, focused on the determination of proteins and peptides.
Electrophoresis, 22, (12), 2375-2383, (2001)
   

In-line preconcentrator

Moreno-González D et al., In-line molecularly imprinted polymer solid phase extraction-capillary electrophoresis coupled with tandem mass spectrometry for the determination of patulin in apple-based food.
Food Chemistry, 334, Article127607-(2021)
   

in-line sample treatment

Rocha FRP et al., Solid-phase extractions in flow analysis.
Anais da Academia Brasileira de Ciências, 90, (1 Suppl. 1), 803-824, (2018)
   

In-line SPE

Ramautar R et al., Recent developments in coupled SPE-CE.
Electrophoresis, 31, (1), 44-54, (2010)
   

Innate immunity

Ekdahl KN et al., Innate immunity activation on biomaterial surfaces: A mechanistic model and coping strategies.
Advanced Drug Delivery Reviews, 63, (12), 1042-1050, (2011)
   

Inner filter effect

Yang J et al., Determination of leucomalachite green in fish using a novel MIP-coated QDs probe based on synchronous fluorescence quenching effect.
Sensors and Actuators B: Chemical, 252, 561-567, (2017)
   

Inner filter effect

Yang J et al., Detection of trace tetracycline in fish via synchronous fluorescence quenching with carbon quantum dots coated with molecularly imprinted silica.
Spectrochimica Acta Part A-Molecular and Biomolecular Spctroscopy, 190, 450-456, (2018)
   

Inner filter effect

Yang J et al., Simultaneous detection of malachite and leucomalachite green based on dual template CdTe@MIP via normal and synchronous fluorescence quenching.
Dyes and Pigments, 155, 171-178, (2018)
   

innovative molecularly imprinted polymers

Zhang LM et al., Recent Advances in the Application of Innovative Molecularly Imprinted Polymers in the Analysis of Foods and Drugs.
Food Science, 35, (15), 314-320, (2014)
   

inorganic

Book chapter, Jones CW, Strategies for the Control of Porosity around Organic Active Sites in Inorganic Matrices, 
In: Nanostructured Catalysts, Scott SL, Crudden CM, Jones CW (Eds.) 
Springer US: 277-295, (2003)    

Inorganic

Aguilar-Arteaga K et al., Magnetic solids in analytical chemistry: A review.
Analytica Chimica Acta, 674, (2), 157-165, (2010)
   

inorganic

Cao Z et al., Fabrication of Phosphate-Imprinted PNIPAM/SiO2 Hybrid Particles and Their Phosphate Binding Property.
Polymers, 11, (2), ArticleNo253-(2019)
   

inorganic adsorbents

Polyanina DA et al., Molecularly imprinted inorganic supports in high-performance liquid chromatography and solid-phase extraction.
Journal of Analytical Chemistry, 70, (3), 277-286, (2015)
   

Inorganic analysis

Matsuoka S et al., Recent trends in solid phase spectrometry: 2003-2009. A Review.
Analytica Chimica Acta, 664, (1), 1-18, (2010)
   

Inorganic and organic species

Zhang ZY et al., Recent developments and applications of chemiluminescence sensors.
Analytica Chimica Acta, 541, (1-2), 37-46, (2005)
   

inorganic anions

Altria KD et al., Analysis of acidic compounds using capillary electrochromatography.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 717, (1-2), 341-353, (1998)
   

inorganic anions

Liu Z et al., Recent progress in adsorbed stationary phases for capillary electrochromatography.
Electrophoresis, 23, (22-23), 3954-3972, (2002)
   

Inorganic arsenic

Jinadasa KK et al., Ionic imprinted polymer - Vortex-assisted dispersive micro-solid phase extraction for inorganic arsenic speciation in rice by HPLC-ICP-MS.
Talanta, 220, Article121418-(2020)
   

Inorganic arsenic

Jinadasa KK et al., Synthesis and application of a surface ionic imprinting polymer on silica-coated Mn-doped ZnS quantum dots as a chemosensor for the selective quantification of inorganic arsenic in fish.
Analytical and Bioanalytical Chemistry, 412, (7), 1663-1673, (2020)
   

Inorganic arsenic speciation

Jinadasa KK et al., Ionic imprinted polymer solid-phase extraction for inorganic arsenic selective pre-concentration in fishery products before high-performance liquid chromatography - inductively coupled plasma-mass spectrometry speciation.
Journal of Chromatography A, 1619, Article460973-(2020)
   

Inorganic arsenic species

Kisomi AS et al., Application of [mu]-TLC for speciation of inorganic arsenic by laser ablation inductively coupled plasma mass spectrometry.
Microchemical Journal, 159, Article105443-(2020)
   

inorganic hybrid

Wang CY et al., Molecularly imprinted photoelectrochemical sensor for aflatoxin B1 detection based on organic/inorganic hybrid nanorod arrays.
Sensors and Actuators B: Chemical, 339, Article129900-(2021)
   

inorganic materials

Defreese JL et al., Shape-selective covalent binding in bulk, microporous imprinted silica.
Microporous And Mesoporous Materials, 89, (1-3), 25-32, (2006)
   

INORGANIC MATRICES

Moreau JJE et al., The design of selective catalysts from hybrid silica-based materials.
Coordination Chemistry Reviews, 178-180, (2), 1073-1084, (1998)
   

Inorganic mercury

Dakova I et al., Ion-imprinted polymethacrylic microbeads as new sorbent for preconcentration and speciation of mercury.
Talanta, 78, (2), 523-529, (2009)
   

Inorganic mercury

Dakova I et al., Synthesis and characterization of the Hg(II)-ion imprinted microbeads and membranes for enrichment of inorganic Hg(II).
Annuaire de l’Université de Sofia ’St. Kliment Ohridski’ Faculte de Chimie, 102-103, 165-175, (2011)
   

inorganic molecular imprinting

Hunnius M et al., Selective surface adsorption versus imprinting in amorphous microporous silicas.
Microporous And Mesoporous Materials, 29, (3), 389-403, (1999)
   

Inorganic molecularly imprinted polymer

Ahmadi H et al., Entacapone detection by a GOQDs-molecularly imprinted silica fluorescent chemical nanosensor.
Analytical and Bioanalytical Chemistry, 411, (5), 1075-1084, (2019)
   

Inorganic molecularly imprinted polymers

Wei HS et al., Preparation of inorganic molecularly imprinted polymers with higher adsorption and selectivity by sol-gel method.
Journal of Chromatography B, 836, (1-2), 57-62, (2006)
   

Inorganic-organic co-functional monomer

Wang H et al., Preparation of molecular imprinted microspheres based on inorganic-organic co-functional monomer for miniaturized solid-phase extraction of fluoroquinolones in milk.
Journal of Chromatography B, 949-950, 24-29, (2014)
   

Inorganic-Organic Hybrid Material

Proceeding, Yan HY et al, Preparation and Characteristic of the New Magnetic Organic–Inorganic Hybrid Molecularly Imprinted Microsphere Materials, 
In: Applied Mechanics and Materials, Sung WP, Kao CM, Chen R (Eds.), 
1106-1109, (2012)
   

inorganic-organic hybrid materials

Book chapter, Guo YZet al., Nanostructured sol-gel composites for electroanalysis, 
In: Proceedings of the Symposium on New Directions in Electroanalytical Chemistry II, Leddy J, Vanysek P, Porter MD (Eds.) 
Electroanalytical Society: Pennington, 210-216, (1999)    

inorganic-organic hybrid materials

Lin CI et al., Synthesis of molecular imprinted organic-inorganic hybrid polymer binding caffeine.
Analytica Chimica Acta, 481, (2), 175-180, (2003)
   

Inorganic oxide adsorbents

Book chapter, Poole CFet al., 2.14 - Principles and Practice of Solid-Phase Extraction, 
In: Comprehensive Sampling and Sample Preparation, Pawliszyn J (Ed.) 
Academic Press: Oxford, 273-297, (2012)    

INORGANIC OXIDES

Carbajo MC et al., Micro/nano-structural properties of imprinted macroporous titania and zirconia.
Journal of Materials Chemistry, 13, (9), 2311-2316, (2003)
   

inorganic perovskites

Huang SY et al., Novel Fluorescence Sensor Based on All-Inorganic Perovskite Quantum Dots Coated with Molecularly Imprinted Polymers for Highly Selective and Sensitive Detection of Omethoate.
ACS Applied Materials & Interfaces, 10, (45), 39056-39063, (2018)
   

inorganics

Rao TP et al., Styrene-divinyl benzene copolymers: Synthesis, characterization, and their role in inorganic trace analysis.
Critical Reviews in Analytical Chemistry, 34, (3-4), 177-193, (2004)
   

inorganics

Rao TP et al., Metal ion-imprinted polymers--Novel materials for selective recognition of inorganics.
Analytica Chimica Acta, 578, (2), 105-116, (2006)
   

inorganics

Rao TP et al., Biomimetic Sensors for Toxic Pesticides and Inorganics based on Optoelectronic/Electrochemical Transducers-An Overview.
Critical Reviews in Analytical Chemistry, 37, (3), 191-210, (2007)
   

Inorganic silica polymer

Mehrzad-Samarin M et al., A novel metronidazole fluorescent nanosensor based on graphene quantum dots embedded silica molecularly imprinted polymer.
Biosensors and Bioelectronics, 92, 618-623, (2017)
   

inorganic solids

Chesnut DJ et al., Organic/inorganic composite materials: the roles of organoamine ligands in the design of inorganic solids.
Coordination Chemistry Reviews, 190-192, (1), 737-769, (1999)
   

inorganic solids

Davis ME, Reflections on routes to enantioselective solid catalysts.
Topics In Catalysis, 25, (1-4), 3-7, (2003)
   

inorganic substrates

Bulatova EV et al., Use of Micro- and Nanodimensional Inorganic Materials in Surface Molecular Imprinting.
Journal of Analytical Chemistry, 73, (8), 750-764, (2018)
   

inorganic thin film

Lee SW et al., Adsorption of TiO2 nanoparticles imprinted with D-glucose on a gold surface.
Molecular Crystals And Liquid Crystals, 371, 111-114, (2001)
   

inosine

Kusunoki T et al., Molecular imprinting micropolymerbeads having cooperative effect of both surfactant and inosine template.
Journal of Applied Polymer Science, 117, (1), 565-571, (2010)
   

inosine

Cela-Pérez MC et al., Selective removal of ATP degradation products from food matrices II: Rapid screening of hypoxanthine and inosine by molecularly imprinted matrix solid-phase dispersion for evaluation of fish freshness.
Talanta, 135, 58-66, (2015)
   

inosine

Iskierko Z et al., Extended-gate field-effect transistor (EG-FET) with molecularly imprinted polymer (MIP) film for selective inosine determination.
Biosensors and Bioelectronics, 74, 526-533, (2015)
   

Inquiry-Based

Tomasik JH et al., Development and Preliminary Impacts of the Implementation of an Authentic Research-Based Experiment in General Chemistry.
Journal of Chemical Education, 90, (9), 1155-1161, (2013)
   

In2S3

Xu R et al., Molecular imprinted photoelectrochemical sensor for bisphenol A supported by flower-like AgBiS2/In2S3 matrix.
Sensors and Actuators B: Chemical, 330, Article129387-(2021)
   

Insecticide

Sharma PS et al., Molecular imprinting for selective chemical sensing of hazardous compounds and drugs of abuse.
TrAC Trends in Analytical Chemistry, 34, (1), 59-77, (2012)
   

Insecticide

Yang CH et al., Fluorometric determination of fipronil by integrating the advantages of molecularly imprinted silica and carbon quantum dots.
Microchimica Acta, 187, (1), Article12-(2019)
   

insecticides

Gong JL et al., Capacitive chemical sensor for fenvalerate assay based on electropolymerized molecularly imprinted polymer as the sensitive layer.
Analytical and Bioanalytical Chemistry, 379, (2), 302-307, (2004)
   

insecticides

Li SH et al., Synergetic recognition and separation of kelthane and pyridaben base on magnetic molecularly imprinted polymer nanospheres.
Journal of Separation Science, 39, (20), 4019-4026, (2016)
   

insecticides

Farooq S et al., Synthesis of core-shell magnetic molecularly imprinted polymer for the selective determination of imidacloprid in apple samples.
Journal of Separation Science, 42, (14), 2455-2465, (2019)
   

INSIGHTS

Yu C et al., Insights into the origins of binding and the recognition properties of molecularly imprinted polymers prepared using an amide as the hydrogen-bonding functional group.
Journal of Molecular Recognition, 11, (1-6), 69-74, (1998)
   

INSIGHTS

Pap T et al., Effect of solvents on the selectivity of terbutylazine imprinted polymer sorbents used in solid-phase extraction.
Journal of Chromatography A, 973, (1-2), 1-12, (2002)
   

in silico

Ikegami T et al., In Silico Characterization of Binding Properties on a Molecularly Imprinted Polymer.
Bunseki Kagaku, 70, (3), 111-124, (2021)
   

in site technique

Zhang QQ et al., Preparation of propranolol molecularly imprinted monolithic column and study on its bonding speciality.
Chinese Journal of Pharmaceutical Analysis, 26, (12), 1694-1697, (2006)
   

in-situ

Matsui J et al., An in-situ approach to molecularly imprinted "tailor-made" separation media.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 157-157, (1997)
   

in-situ

Weaver M et al., Proton imprinting via sol-gel captivated pH indicators.
Journal of Undergraduate Research, 2, 97-97, (2002)
   

in-situ

Blanco-López MC et al., Voltammetric response of diclofenac-molecularly imprinted film modified carbon electrodes.
Analytical and Bioanalytical Chemistry, 377, (2), 257-261, (2003)
   

in-situ

Hayden O et al., Combining atomic force microscope and quartz crystal microbalance studies for cell detection.
Measurement Science & Technology, 14, (11), 1876-1881, (2003)
   

in-situ

Marx KA, Quartz crystal microbalance: A useful tool for studying thin polymer films and complex biomolecular systems at the solution-surface interface.
Biomacromolecules, 4, (5), 1099-1120, (2003)
   

in-situ

Cai LS et al., Molecularly imprinted polymer for theophylline retention and molecular recognition properties in capillary electrochromatography.
Wuhan University Journal of Natural Sciences, 9, (3), 359-365, (2004)
   

in-situ

El-Toufaili FA et al., Screening combinatorial libraries of molecularly imprinted polymer films casted on membranes in single-use membrane modules.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 135-139, (2004)
   

in-situ

Hilder EF et al., Development and application of polymeric monolithic stationary phases for capillary electrochromatography.
Journal of Chromatography A, 1044, (1-2), 3-22, (2004)
   

in-situ

Huang YC et al., Preparation and evaluation of molecularly imprinted polymers based on 9-ethyladenine for the recognition of nucleotide bases in capillary electrochromatography.
Electrophoresis, 25, (4-5), 554-561, (2004)
   

in-situ

Li H et al., Adsorption isotherms and sites distribution of caffeic acid - imprinted polymer monolith from frontal analysis.
Chromatographia, 60, (7-8), 425-431, (2004)
   

in-situ

Liu ZS et al., Chiral separation of binaphthol enantiomers on molecularly imprinted polymer monolith by capillary electrochromatography.
Analytical Sciences, 20, (4), 673-678, (2004)
   

in-situ

Liu ZS et al., Preparation and characterization of molecularly imprinted monolithic column based on 4-hydroxybenzoic acid for the molecular recognition in capillary electrochromatography.
Analytica Chimica Acta, 523, (2), 243-250, (2004)
   

in-situ

Mertz E et al., Integrating chemosensors for amine-containing compounds into cross-linked dendritic hosts.
Tetrahedron, 60, (49), 11191-11204, (2004)
   

in-situ

Oral E et al., Dynamic studies of molecular imprinting polymerizations.
Polymer, 45, (18), 6163-6173, (2004)
   

in-situ

Park JK et al., Separation of phenylalanine by ultrafiltration using D-Phe imprinted polyacrylonitrile-poly(acrylic acid)-poly(acryl amide) terpolymer membrane.
Korean Journal of Chemical Engineering, 21, (5), 994-998, (2004)
   

in-situ

Suedee R et al., Use of molecularly imprinted polymers from a mixture of tetracycline and its degradation products to produce affinity membranes for the removal of tetracycline from water.
Journal of Chromatography B, 811, (2), 191-200, (2004)
   

in-situ

Wu YQ, Investigation on the in-situ synthesis of molecular imprint polymer for on-line monintoring Chloromycetin by piezoelectricity sensor.
Piezoelectrics and Acoustooptics, 29, (6), 660-662, (2007)
   

in-situ

Wu YQ et al., Investigation on the in-situ synthesis of molecular imprint polymer for on-line monintoring chloromycetin by piezoelectricity sensor.
Piezoelectrics and Acoustooptics, 31, (4), 589-590,593, (2009)
   

in-situ

Zhang J et al., Preparation of molecular imprinted monolithic extraction column and its application to strychnine analysis in Wan Tong Jin Gu troche by HPLC.
Journal of Liquid Chromatography & Related Technologies, 33, (6), 770-777, (2010)
   

in situ

Zhang XZ, In Situ Synthesis and Performance Testing of Chloramphenicol Molecular Imprinted Polymer Membrane Induced by Light.
Journal of Anhui Agricultural Sciences, 39, (12), 7253-7254,7290, (2011)
   

in-situ

Guo QJ et al., In-situ and controllable synthesis of graphene-gold nanoparticles/molecularly imprinted polymers composite modified electrode for sensitive and selective rutin detection.
Microchemical Journal, 158, Article105254-(2020)
   

in situ adsorption

Xiong Y et al., Preparation of Molecularly Imprinted Microspheres as Biomimetic Recognition Material for In Situ Adsorption and Selective Chemiluminescence Determination of Bisphenol A.
Polymers, 10, (7), ArticleNo780-(2018)
   

In situ biodegradation

Liu F et al., Molecularly imprinted nanofiber membranes enhanced biodegradation of trace bisphenol A by Pseudomonas aeruginosa.
Chemical Engineering Journal, 262, 989-998, (2015)
   

in situ characterization

Book chapter, Tada Met al., Advanced Design of Catalyst Surfaces with Metal Complexes for Selective Catalysis, 
In: Modern Surface Organometallic Chemistry, Basset JM, Psaro R, Roberto D, Ugo R (Eds.) 
Wiley: Weinheim, 375-415, (2009)    

In situ copper oxide

Saumya V et al., Mechanistic aspects of tyrosine sensing on an in situ copper oxide modified molecularly imprinted polypyrrole coated glassy carbon electrode.
Journal of Electroanalytical Chemistry, 663, (2), 53-58, (2011)
   

in situ crosslinking polymerization

Dong HX et al., A surface molecularly imprinted polymer as chiral stationary phase for chiral separation of 1,1’-binaphthalene-2-naphthol racemates.
Chirality, 29, (7), 340-347, (2017)
   

In situ derivatization

Zheng LF et al., Core-shell magnetic molecularly imprinted polymers used rhodamine B hydroxyproline derivate as template combined with in situ derivatization for the specific measurement of L-hydroxyproline.
Journal of Chromatography A, 1532, 30-39, (2018)
   

In-situ electrodeposition

Li X et al., Disposable photoelectrochemical sensing strip for highly sensitive determination of perfluorooctane sulfonyl fluoride on functionalized screen-printed carbon electrode.
Talanta, 181, 147-153, (2018)
   

In-situ electropolymerization

Roushani M et al., Impedimetric ultrasensitive detection of trypsin based on hybrid aptamer-2DMIP using a glassy carbon electrode modified by nickel oxide nanoparticle.
Microchemical Journal, 172, Article106955-(2022)
   

in situ grafting

Proceeding, Ding J et al, Preparation of L-Tryptophan Imprinted Polymer Microspheres in Aqueous Media by In Situ Grafting on Surface, 
In: Advanced Materials Research, Liu SQ, Zuo M (Eds.), 
1658-1662, (2011)
   

in situ growth

Wang AX et al., Preparation of Magnetic Hollow Molecularly Imprinted Polymers for Detection of Triazines in Food Samples.
Journal of Agricultural and Food Chemistry, 64, (24), 5110-5116, (2016)
   

In-situ hydrothermal

Lazau C et al., Towards developing an efficient sensitive element for trinitrotoluene detection: TiO2 thin films functionalized with molecularly imprinted copolymer films.
Applied Surface Science, 384, 449-458, (2016)
   

In-situ hydrothermal synthesis

Liu GL et al., In-situ hydrothermal synthesis of molecularly imprinted polymers coated carbon dots for fluorescent detection of bisphenol A.
Sensors and Actuators B: Chemical, 228, 302-307, (2016)
   

In situ imprinting

Prathish KP et al., Rational Design of In Situ Monolithic Imprinted Polymer Membranes for the Potentiometric Sensing of Diethyl Chlorophosphate - a Chemical Warfare Agent Simulant.
Electroanalysis, 21, (9), 1048-1056, (2009)
   

In situ metal oxide modification

Saumya V et al., In situ copper oxide modified molecularly imprinted polypyrrole film based voltammetric sensor for selective recognition of tyrosine.
Talanta, 85, (2), 1056-1062, (2011)
   

In situ MIP powder

Chough SH et al., In situ preparation of powder and the sorption behaviors of molecularly imprinted polymers through the complexation between polymer ion of methyl methacrylate/acrylic acid and Ca++ ion.
Analytica Chimica Acta, 841, 84-90, (2014)
   

in situ molecular imprinting

Takeuchi T et al., Miniaturized molecularly imprinted continuous polymer rods.
HRC - Journal of High Resolution Chromatography, 23, (1), 44-46, (2000)
   

In situ molecular imprinting method

Zhou J et al., Enantiomeric recognition of continuous molecularly imprinted polymer rod prepared by in-situ method.
Chinese Journal of Analytical Chemistry, 28, (3), 296-299, (2000)
   

In-situ molecular imprinting technique

Wu WX et al., Study on the preparation and recognition property of molecular imprinted polymer of myclobutanil.
Physical Testing and Chemical Analysis Part B: Chemical Analysis, 42, (2), 77-79, (2006)
   

in situ monitoring

Wei QQ et al., A novel method for in situ monitoring the polymerization process of molecularly imprinted films by surface plasmon resonance.
Chemical Journal of Chinese Universities, 32, (2), 204-206, (2011)
   

in-situ monitoring

Pan Y et al., Developing a generally applicable electrochemical sensor for detecting macrolides in water with thiophene-based molecularly imprinted polymers.
Water Research, 205, Article117670-(2021)
   

In-situ polymer growth

Unger C et al., Molecularly imprinted thin film surfaces in sensing: Chances and challenges.
Reactive and Functional Polymers, 161, Article104855-(2021)
   

In situ polymerisation

Du W et al., Dummy-template molecularly imprinted solid phase extraction for selective analysis of ractopamine in pork.
Food Chemistry, 139, (1-4), 24-30, (2013)
   

in-situ polymerisation

Schnettelker A et al., A Self-Organisation Synthesis Approach for Bacteria Molecularly Imprinted Polymers.
Procedia Engineering, 168, 557-560, (2016)
   

in-situ polymerization

Huang XD et al., Preparation of Molecularly Imprinted Chiral Monolithic Column and Its Applications for Separation of Diastereomers.
Chinese Journal of Chromatography, 20, (5), 436-438, (2002)
   

In situ polymerization

Shi RX et al., The Way of Screening of Molecularly Imprinted Polymer Based on Semi - Trace in situ Polymerization.
Chemical Sensors (China), 22, (4), 45-52, (2002)
   

in-situ polymerization

Fan ZL et al., Aminoantipyrine imprinted column prepared by in-situ polymerization and investigation of binding character in aqueous medium.
Acta Chimica Sinica, 62, (12), 1176-1179, (2004)
   

in-situ polymerization

Yin JF et al., Molecular recognition in in-situ nateglinide imprinted chiral stationary phase.
Acta Chimica Sinica, 62, (19), 1922-1926, (2004)
   

in-situ polymerization

Zhang GQ et al., In-situ polymerization of aminopyrine imprinted column and investigation of binding character in aqueous medium.
Chinese Journal of Analytical Chemistry, 33, (10), 1393-1396, (2005)
   

in-situ polymerization

Zhang J et al., Preparation of strychnine molecularly imprinted monolithic column.
Chinese Journal of Analytical Chemistry, 33, (1), 113-116, (2005)
   

in-situ polymerization

Zhang J et al., Chromatographic features and molecular recognition mechanism of a strychnine monolithic molecularly imprinted polymer.
Chromatographia, 62, (5-6), 319-323, (2005)
   

In situ polymerization

Proceeding, Padró-Cortés L et al, Insight the rational design of molecularly imprinted polymer for the development of biomimetic receptors, 

(2006)
   

in-situ polymerization

Yan H et al., Preparation and characterization of theophylline-imprinted monolithic column.
Separation Science and Technology, 41, (9), 1841-1855, (2006)
   

in-situ polymerization

Yan H et al., Characteristic and molecular recognition mechanism of theophylline monolithic molecularly imprinted polymer.
Journal of Liquid Chromatography & Related Technologies, 29, (10), 1393-1404, (2006)
   

In situ polymerization

Zhu XL et al., Molecularly imprinted polymer membranes for substance-selective solid-phase extraction from aqueous solutions.
Journal of Applied Polymer Science, 101, (6), 4468-4473, (2006)
   

In situ polymerization

Yan H et al., Characteristics of a monolithic molecularly imprinted column and its application for chromatographic separation.
Journal of Industrial and Engineering Chemistry, 13, (4), 552-557, (2007)
   

in-situ polymerization

Li ZY et al., Monolithic column of molecularly imprinted polymers for liquid chromatography.
Progress In Chemistry, 20, (5), 747-753, (2008)
   

in-situ polymerization

Yin YF et al., Synthesis and Characterization of Emodin Molecularly Imprinted Monolithic Column.
Journal of Instrumental Analysis, 27, (7), 758-761, (2008)
   

In situ polymerization

Sun XL et al., Determination of tetracyclines in food samples by molecularly imprinted monolithic column coupling with high performance liquid chromatography.
Talanta, 79, (3), 926-934, (2009)
   

In situ polymerization

Yang LQ et al., Selective enrichment and determination of nicosulfuron in water and soil by a stir bar based on molecularly imprinted polymer coatings.
Analytica Chimica Acta, 670, (1-2), 72-77, (2010)
   

In situ polymerization

Chen CB et al., Trace bensulfuron-methyl analysis in tap water, soil, and soybean samples by a combination of molecularly imprinted stir bar sorption extraction and HPLC-UV.
Journal of Applied Polymer Science, 122, (2), 1198-1205, (2011)
   

In situ polymerization

Luo YF et al., Preparation of Monolithic Imprinted Stationary Phase for Clenbuterol by In Situ Polymerization and Application in Biological Samples Pretreatment.
Chromatographia, 74, (9), 693-701, (2011)
   

in-situ polymerization

Yang QQ et al., Preparation of baicalein molecularly imprinted monolithic columns.
Chinese Journal of Pharmaceutical Analysis, 31, (1), 1-5, (2011)
   

In situ polymerization

Baykara E et al., Synthesis of monolithic HPLC stationary phase with self-assembled molecular recognition sites for 4-aminophenol.
Journal of Applied Polymer Science, 123, (1), 493-501, (2012)
   

in-situ polymerization

Zhou Q et al., Electrochemical behavior and determination of paracetamol at molecular imprinted film modified glassy carbon electrode.
Journal of Instrumental Analysis, 31, (5), 589-592, (2012)
   

in-situ polymerization

Cai LG et al., Preparation and Characterization of Porous Molecularly Imprinted Composite Membrane with Sudan I as the Template.
Food Science, 34, (18), 70-74, (2013)
   

In situ polymerization

Li JM et al., Preparation and evaluation of a novel molecularly imprinted SPE monolithic capillary column for the determination of auramine O in shrimp.
Journal of Separation Science, 36, (21-22), 3608-3614, (2013)
   

In situ polymerization

Lu CM et al., Preparation and recognition of nicotine imprinted polymer-derivatized silica monolithic column.
Chemical Industry and Engineering Progress, 32, (7), 1613-1620, (2013)
   

In situ polymerization

Su ZH et al., Molecularly imprinted solid-phase extraction monolithic capillary column for selective extraction and sensitive determination of safranine T in wolfberry.
Analytical and Bioanalytical Chemistry, 406, (5), 1551-1556, (2014)
   

In situ polymerization

Wang CQ et al., Preparation and Application of Podophyllotoxin Sensor Based on Molecularly Imprinting Technique.
Chinese Journal of Analytical Chemistry, 42, (6), 842-846, (2014)
   

in-situ polymerization

Bai HP et al., A novel sensitive electrochemical sensor based on in-situ polymerized molecularly imprinted membranes at graphene modified electrode for artemisinin determination.
Biosensors and Bioelectronics, 64, 352-358, (2015)
   

In-situ-polymerization

Wang YY et al., Molecularly imprinted electrochemical sensing interface based on in-situ-polymerization of amino-functionalized ionic liquid for specific recognition of bovine serum albumin.
Biosensors and Bioelectronics, 74, 792-798, (2015)
   

In situ polymerization

Zhai HY et al., Molecularly imprinted coated graphene oxide solid-phase extraction monolithic capillary column for selective extraction and sensitive determination of phloxine B in coffee bean.
Analytica Chimica Acta, 865, 16-21, (2015)
   

In situ polymerization

Bai HP et al., Electrochemical sensor based on in situ polymerized ion-imprinted membranes at graphene modified electrode for palladium determination.
Journal of Electroanalytical Chemistry, 771, 29-36, (2016)
   

in-situ polymerization method

Fan ZL et al., Investigation of Molecularly Imprinted Polymer Rod with Aminoantipyrine as Template by In-situ Polymerization Method and Their Separation Characteristics.
Chinese Journal of Chromatography, 21, (3), 199-201, (2003)
   

in-situ polymerization method

Li L et al., Molecularly Imprinted Polymer as Stationary Phase in HPLC for the Separation and Recognition of Sulfamethoxazole.
Journal of Instrumental Analysis, 26, (3), 409-412, (2007)
   

in-situ preparation

Vidal JC et al., Recent advances in electropolymerized conducting polymers in amperometric biosensors.
Microchimica Acta, 143, (2-3), 93-111, (2003)
   

in-situ preparation

Qiao D et al., In-situ preparation of molecularly imprinted fluorescent sensing test strips for on-site detection of tyramine in vinegar.
Microchemical Journal, 160, Article105638-(2021)
   

in situ product recovery

Book chapter, Hatti-Kaul R, Downstream Processing in Industrial Biotechnology, 
In: Industrial Biotechnology, Soetaert W, Vandamme EJ (Eds.) 
Wiley-VCH: Weinheim, 279-321, (2010)    

In situ reduced silver nanoparticles

Wang ZW et al., In situ reduced silver nanoparticles embedded molecularly imprinted reusable sensor for selective and sensitive SERS detection of Bisphenol A.
Applied Surface Science, 457, 323-331, (2018)
   

In-situ remediation

Chi ZF et al., Selective removal of As(III) using magnetic graphene oxide ion-imprinted polymer in porous media: Potential effect of external magnetic field.
Journal of Environmental Chemical Engineering, 9, (4), Article105671-(2021)
   

In-situ removal

Du X et al., A Facile Potential-Induced In-Situ Ion Removal Trick: Fabrication of High-Selective Ion-Imprinted Film for Trivalent Yttrium Ion Separation.
Electrochimica Acta, 176, 1313-1323, (2015)
   

In situ self-assembly

He H et al., Detection of trace microcystin-LR on a 20 MHz QCM sensor coated with in situ self-assembled MIPs.
Talanta, 131, 8-13, (2015)
   

In situ sensing

Lieberzeit PA et al., Chemosensors in environmental monitoring: challenges in ruggedness and selectivity.
Analytical and Bioanalytical Chemistry, 393, (2), 467-472, (2009)
   

in situ synthesis

Li H et al., Separation and purification of chlorogenic acid by molecularly imprinted polymer monolithic stationary phase.
Journal of Chromatography A, 1098, (1-2), 66-74, (2005)
   

in-situ synthesis

Li H et al., Application of Molecularly Imprinted Column for Separation and Purification of Bioactive Compound from Cirsium segetum Bunge.
Separation Science and Technology, 44, (2), 370-385, (2009)
   

in situ synthesis

Yang WJ et al., Preparation of dibenzoyl-D-tartaric acid molecularly imprinted monolithic column and its chromatographic property.
Chinese Journal of Analysis Laboratory, 29, (10), 21-25, (2010)
   

in situ synthesis

Gu JY et al., Surface-initiated molecularly imprinted polymeric column: In situ synthesis and application for semi-preparative separation by high performance liquid chromatography.
Journal of Chromatography A, 1218, (45), 8150-8155, (2011)
   

in situ synthesis

Chen XQ et al., In situ synthesis of monolithic molecularly imprinted stationary phases for liquid chromatographic enantioseparation of dibenzoyl tartaric acid enantiomers.
Journal of Porous Materials, 19, (5), 587-595, (2012)
   

in situ synthesis

Sun L et al., Preparation and evaluation of camphor monolithic molecularly imprinted column.
Chinese Journal of Analysis Laboratory, 33, (7), 791-795, (2014)
   

In situ technique

Lin LQ et al., Preparation of molecularly imprinted polymer for sinomenine and study on its molecular recognition mechanism.
Polymer, 47, (11), 3792-3798, (2006)
   

In situ technique

Lin LQ et al., Concentration and extraction of sinomenine from herb and plasma using a molecularly imprinted polymer as the stationary phase.
Analytica Chimica Acta, 561, (1-2), 178-182, (2006)
   

In situ technique

Zhang J et al., Preparation of ephedrine molecularly imprinted monolithic columns.
Chinese Journal of Pharmaceutical Analysis, 26, (12), 1760-1764, (2006)
   

In situ technique

Amut E et al., In situ polymerization preparation of chiral molecular imprinting polymers monolithic column for amlodipine and its recognition properties study.
Journal of Polymer Research, 17, (3), 401-409, (2010)
   

In situ technique

Chen DM et al., Preparation and evaluation of monolithic molecularly imprinted stationary phase for S-naproxen.
Journal of Xi’an Medical University, (1), 26-31, (2011)
   

In situ technique

Chen DM et al., Preparation and evaluation of monolithic molecularly imprinted stationary phase for S-naproxen.
Journal of Pharmaceutical Analysis, 1, (1), 26-31, (2011)
   

in situ thermal-initiated polymerization

Yin ZH et al., Synthesis and characterization of 2,4-dichlorophenoxyacetic acid molecularly imprinted monolithic column and its chromatographic property.
Journal of Instrumental Analysis, 28, (8), 949-953, (2009)
   

in situ UV

Liu J et al., Molecularly Imprinted Polymer Enables High-Efficiency Recognition and Trapping Lithium Polysulfides for Stable Lithium Sulfur Battery.
Nano Letters, 17, (8), 5064-5070, (2017)
   

Insoluble template

Leshchinskaya AP et al., Synthesis and characterization of 2-hydroxyethyl methacrylate-ethylene glycol dimethacrylate polymeric granules intended for selective removal of uric acid.
Reactive and Functional Polymers, 102, 101-109, (2016)
   

Instrumental analysis

Book chapter, Gros Met al., Analysis of Emerging Contaminants of Municipal and Industrial Origin, 
In: Emerging Contaminants from Industrial and Municipal Waste, Barceló D, Petrovic M (Eds.) 
Springer: 37-104, (2008)    

Instrumental methods

Adamusova H et al., Analysis of estrogens and estrogen mimics in edible matrices - A review.
Journal of Separation Science, 37, (8), 885-905, (2014)
   

instrumentation

Book chapter, Cabanilla Set al., Piezoelectric biomimetic sensor for caffeine based on electrosynthesized polypyrrole, 
In: Sensors: Asiasense 2003 - Asian Conference On Sensors, Ahmad M, Heng LY, Salimon J, Ghodgaonkar DK, Yousof RW, Surif S, Taib MN (Eds.) 
IEEE: New York, 105-109, (2003)    

instrumentation

Guiochon GA et al., Progress and future of instrumental analytical chemistry applied to the environment.
Analytica Chimica Acta, 524, (1-2), 1-14, (2004)
   

instrumentation

Theodoridis G et al., Automated sample preparation based on the sequential injection principle - Solid-phase extraction on a molecularly imprinted polymer coupled on-line to high-performance liquid chromatography.
Journal of Chromatography A, 1030, (1-2), 69-76, (2004)
   

instrumentation

Watabe Y et al., Determination of bisphenol A in environmental water at ultra-low level by high-performance liquid chromatography with an effective on-line pretreatment device.
Journal of Chromatography A, 1032, (1-2), 45-49, (2004)
   

instrumentation

Yan C et al., Capillary electrochromatography: Advances in instrumentation and stationary phases.
Abstracts of Papers of the American Chemical Society, 227, (ANYL), 254-254, (2004)
   

instrumentation

Zwiener C et al., LC-MS analysis in the aquatic environment and in water treatment - a critical review - Part I: Instrumentation and general aspects of analysis and detection.
Analytical and Bioanalytical Chemistry, 378, (4), 851-861, (2004)
   

instrumentation

Brown KE et al., Advances in explosives analysis-part I: animal, chemical, ion, and mechanical methods.
Analytical and Bioanalytical Chemistry, 408, (1), 35-47, (2016)
   

Insulating layer

Jaiswal L et al., A thalidomide templated molecularly imprinted polymer that promotes a biologically active chiral entity tagged in colon carcinoma cells and protein-related immune activation.
Process Biochemistry, 50, (12), 2035-2050, (2015)
   

insulating oil of power transformers

Proceeding, Cennamo N et al, Optical chemical sensor for oil-filled power transformer, 
In: Photonics Technologies, 2014 Fotonica AEIT Italian Conference on, 
1-3, (2014)
   

insulating oil of power transformers

Proceeding, Cennamo N et al, An optical platform for furfural detection in trasformer oil, 

1-4, (2015)
   

insulating oil system

Cennamo N et al., Monitoring of Low Levels of Furfural in Power Transformer Oil with a Sensor System Based on a POF-MIP Platform.
Sensors, 15, (4), 8499-8511, (2015)
   

Insulation oil

Tominaga Y et al., Synthesis of novel polymer type sulfoxide solid phase combined with the porogen imprinting for enabling selective separation of polychlorinated biphenyls.
Chemosphere, 89, (4), 378-382, (2012)
   

Insulin

Proceeding, Dickert FL et al, Sensors for Healthcare Monitoring - Proteins, Viruses and Blood-Group-Typing, 
Dössel O, Schlegel WC (Eds.), 
325-328, (2009)
   

Insulin

Çavus A et al., Preparation of poly(hydroxyethyl methacrylate) cryogels containing l-histidine for insulin recognition.
Colloids and Surfaces B: Biointerfaces, 107, 84-89, (2013)
   

Insulin

Moein MM et al., Molecularly imprinted polymer cartridges coupled on-line with high performance liquid chromatography for simple and rapid analysis of human insulin in plasma and pharmaceutical formulations.
Talanta, 121, 30-36, (2014)
   

Insulin

Tiwari MP et al., An insulin monitoring device based on hyphenation between molecularly imprinted micro-solid phase extraction and complementary molecularly imprinted polymer-sensor.
Journal of Chromatography A, 1337, 22-31, (2014)
   

Insulin

Zhu WY et al., Magnetically controlled electrochemical sensing membrane based on multifunctional molecularly imprinted polymers for detection of insulin.
Electrochimica Acta, 218, 91-100, (2016)
   

Insulin

Paul PK et al., Biomimetic insulin-imprinted polymer nanoparticles as a potential oral drug delivery system.
Acta Pharmaceutica, 67, 149-168, (2017)
   

Insulin

Paul PK et al., Improvement in insulin absorption into gastrointestinal epithelial cells by using molecularly imprinted polymer nanoparticles: Microscopic evaluation and ultrastructure.
International Journal of Pharmaceutics, 530, (1-2), 279-290, (2017)
   

Insulin

Zhao CJ et al., An Insulin Molecularly Imprinted Electrochemical Sensor Based on Epitope Imprinting.
Chinese Journal of Analytical Chemistry, 45, (9), 1360-1366, (2017)
   

Insulin

Goudarzi F et al., Effect of biomolecule chemical structure on the synthesis of surface magnetic molecularly imprinted polymer in aqueous solution using various monomers for high-capacity selective recognition of human insulin.
Reactive and Functional Polymers, 143, Article104322-(2019)
   

Insulin

Kartal F et al., Molecularly imprinted polymer based quartz crystal microbalance sensor for the clinical detection of insulin.
Materials Science and Engineering: C, 97, 730-737, (2019)
   

Insulin

Garcia Cruz A et al., Design and fabrication of a smart sensor using in silico epitope mapping and electro-responsive imprinted polymer nanoparticles for determination of insulin levels in human plasma.
Biosensors and Bioelectronics, 169, Article112536-(2020)
   

Insulin

Wang ZD et al., A rational route to hybrid aptamer-molecularly imprinted magnetic nanoprobe for recognition of protein biomarkers in human serum.
Analytica Chimica Acta, 1128, 1-10, (2020)
   

INSULIN-DELIVERY

Seong H et al., Preparation of liposomes with glucose binding sites: liposomes containing di-branched amino acid derivatives.
Biomaterials, 24, (24), 4487-4493, (2003)
   

INSULIN-DELIVERY SYSTEM

Seong H et al., Glucose binding to molecularly imprinted polymers.
Journal of Biomaterials Science-Polymer Edition, 13, (6), 637-649, (2002)
   

Insulin-imprinted polymer

Prasad BB et al., Imprinting molecular recognition sites on multiwalled carbon nanotubes surface for electrochemical detection of insulin in real samples.
Electrochimica Acta, 55, (28), 9146-9156, (2010)
   

INSULIN-SECRETION

Yang GL et al., Chiral separation of nateglinide and its (L) enantiomer on a molecularly imprinted polymer-based stationary phase.
Chromatographia, 59, (11-12), 705-708, (2004)
   

Integrated optical waveguide

Walker NR et al., Selective detection of gas-phase TNT by integrated optical waveguide spectrometry using molecularly imprinted sol-gel sensing films.
Analytica Chimica Acta, 593, (1), 82-91, (2007)
   

Integrated potentiostat

Huang CY et al., Integrated potentiostat for electrochemical sensing of urinary 3-hydroxyanthranilic acid with molecularly imprinted poly(ethylene-co-vinyl alcohol).
Biosensors and Bioelectronics, 67, 208-213, (2015)
   

integrated sensing systems

Mustafa F et al., Multifunctional Nanotechnology-Enabled Sensors for Rapid Capture and Detection of Pathogens.
Sensors, 17, (9), ArticleNo2121-(2017)
   

integration

Lye GJ et al., Application of in situ product-removal techniques to biocatalytic processes.
Trends In Biotechnology, 17, (10), 395-402, (1999)
   

integration

Conrad PGI et al., Functional molecularly imprinted polymer microstructures fabricated using microstereolithography.
Advanced Materials, 15, (18), 1541-1544, (2003)
   

integration

Blanco-López MC et al., Electrochemical sensing with electrodes modified with molecularly imprinted polymer films.
Analytical and Bioanalytical Chemistry, 378, (8), 1922-1928, (2004)
   

integration

Alizadeh T, Comparison of different methodologies for integration of molecularly imprinted polymer and electrochemical transducer in order to develop a paraoxon voltammetric sensor.
Thin Solid Films, 518, (21), 6099-6106, (2010)
   

Intelligence material

Guo M et al., Preparation and Properties Characterization of Intelligent Molecularly Imprinted Polymer Based on Diles-Alder Reaction.
Chemical Journal of Chinese Universities, 39, (3), 566-574, (2018)
   

Intelligent biomaterials

Clegg JR et al., Vision for Functionally Decorated and Molecularly Imprinted Polymers in Regenerative Engineering.
Regenerative Engineering and Translational Medicine, 3, (3), 166-175, (2017)
   

Intelligent drug delivery

Hillberg AL et al., Molecular imprinted polymer sensors: Implications for therapeutics.
Advanced Drug Delivery Reviews, 57, (12), 1875-1889, (2005)
   

Intelligent drug delivery

Puoci F et al., Stimuli-responsive molecularly imprinted polymers for drug delivery: A review.
Current Drug Delivery, 5, (2), 85-96, (2008)
   

Intelligent drug delivery system

Liu H et al., Capsule-like molecular imprinted polymer nanoparticles for targeted and chemophotothermal synergistic cancer therapy.
Colloids and Surfaces B: Biointerfaces, 208, Article112126-(2021)
   

intelligent function

Nakano Y, Science and technology of polymer gels.
Journal of Chemical Engineering of Japan, 38, (8), 605-614, (2005)
   

intelligent gel

Proceeding, Miyata T, Design of stimuli-responsive gels and their applications, 
In: Polymer Preprints, Japan, 
668, (2002)
   

intelligent gels

Byrne ME et al., Molecular imprinting within hydrogels.
Advanced Drug Delivery Reviews, 54, (1), 149-161, (2002)
   

intelligent gels

Hilt JZ et al., Configurational biomimesis in drug delivery: molecular imprinting of biologically significant molecules.
Advanced Drug Delivery Reviews, 56, (11), 1599-1620, (2004)
   

intelligent hydrogel

Sun J et al., Intelligent molecular imprinted hydrogel.
Chemical Sensors (China), 25, (3), 1-6, (2005)
   

Intelligent Hydrogels

Li ZB et al., Development of Molecularly Imprinted Intelligent Hydrogels.
Chinese Polymer Bulletin, (12), 24-28, (2007)
   

Intelligent Hydrogels

Clegg JR et al., Student award for outstanding research winner in the Ph.D. category for the 2017 society for biomaterials annual meeting and exposition, april 5-8, 2017, Minneapolis, Minnesota: Characterization of protein interactions with molecularly imprinted hydrogels that possess engineered affinity for high isoelectric point biomarkers.
Journal of Biomedical Materials Research Part A, 105, (6), 1565-1574, (2017)
   

intelligent imprinted gels

Byrne ME et al., Molecular imprinting within hydrogels.
Advanced Drug Delivery Reviews, 54, (1), 149-161, (2002)
   

Intelligent material

Sano A et al., Recent advances in materials for separation.
Bunseki Kagaku, 56, (5), 279-297, (2007)
   

intelligent polymers

Xiao CS et al., Recent developments in intelligent biomedical polymers.
Science in China Series B: Chemistry, 52, (2), 117-130, (2009)
   

intelligent polymers

Neves MI et al., Molecularly imprinted intelligent scaffolds for tissue engineering applications.
Tissue Engineering Part B: Reviews, 23, (1), 27-43, (2017)
   

Intelligent therapeutics

Caldorera-Moore M et al., Micro- and nanotechnologies for intelligent and responsive biomaterial-based medical systems.
Advanced Drug Delivery Reviews, 61, (15), 1391-1401, (2009)
   

interacting mechanism

Liu YQ et al., Investigation and progress of chromatography column packed with molecularly imprinted polymer.
Chemical Research and Application, 19, (4), 351-357, (2007)
   

interacting mechanism

Liu YQ et al., Development of Molecularly Imprinted Polymer Sensor.
Journal of Instrumental Analysis, 26, (3), 450-454, (2007)
   

interaction

Book chapter, Cyago Aet al., Surface Plasmon Resonance Spectroscopy and Molecularly Imprinted Polymer (MIP) Sensors, 
In: Handbook of Spectroscopy, Gauglitz G, Advincula R (Eds.) 
Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, 1229-1258, (2014)    

interaction

Madikizela LM et al., Experimental and theoretical study of molecular interactions between 2-vinyl pyridine and acidic pharmaceuticals used as multi-template molecules in molecularly imprinted polymer.
Reactive and Functional Polymers, 103, 33-43, (2016)
   

interaction

Pohanka M, Sensors Based on Molecularly Imprinted Polymers.
International Journal of Electrochemical Science, 12, 8082-8094, (2017)
   

π-Interaction

Xu SN et al., Fluorometric determination of quercetin by using graphitic carbon nitride nanoparticles modified with a molecularly imprinted polymer.
Microchimica Acta, 185, (10), 492-(2018)
   

π-Interaction

Li WX et al., A nanocomposite consisting of an amorphous seed and a molecularly imprinted covalent organic framework shell for extraction and HPLC determination of nonsteroidal anti-inflammatory drugs.
Microchimica Acta, 186, (2), Article76-(2019)
   

interaction energies

Sharma D et al., Studies on Bacterial Proteins Corona Interaction with Saponin Imprinted ZnO Nanohoneycombs and Their Toxic Responses.
ACS Applied Materials & Interfaces, 7, (43), 23848-23856, (2015)
   

interaction energies

Schwarz LJ et al., Phytosterol Recognition via Rationally Designed Molecularly Imprinted Polymers.
C, 4, (1), ArticleNo13-(2018)
   

Interaction energy

Liu Y et al., Study of the properties of molecularly imprinted polymers by computational and conformational analysis.
Analytica Chimica Acta, 581, (1), 137-146, (2007)
   

Interaction energy

Liu Y et al., Rational Design and Study on Recognition Property of Paracetamol-Imprinted Polymer.
Applied Biochemistry and Biotechnology, 160, (2), 328-342, (2010)
   

Interaction energy

Riahi S et al., Computational Approach to Investigation of Template/Monomer Complex in Imprinted Polymers; Dinitrobenzene Sensor.
International Journal of Electrochemical Science, 5, (4), 509-516, (2010)
   

Interaction energy

Chen L et al., Synthesis, characterization, and theoretical study of an acrylamide-based magnetic molecularly imprinted polymer for the recognition of sulfonamide drugs.
E-Polymers, 15, (3), 141-150, (2015)
   

Interaction mechanism

Fontanals N et al., Ionic liquids in solid-phase extraction.
TrAC Trends in Analytical Chemistry, 41, 15-26, (2012)
   

Interaction property

Wang H et al., Advances in Molecularly Imprinted Polymers:From Small Molecules Towards Biological Macromolecules.
Chinese Polymer Bulletin, (1), 86-93, (2005)
   

Interactions non covalentes

Hillberg AL et al., Biomolecule imprinting: Developments in mimicking dynamic natural recognition systems.
IRBM, 29, (2-3), 89-104, (2008)
   

intercalation

Ayerdurai V et al., Selective Impedimetric Chemosensing of Carcinogenic Heterocyclic Aromatic Amine in Pork by dsDNA-Mimicking Molecularly Imprinted Polymer Film-Coated Electrodes.
Journal of Agricultural and Food Chemistry, 69, (48), 14689-14698, (2021)
   

INTERCALATION BASED SENSORS

Ji HS et al., Selective piezoelectric odor sensors using molecularly imprinted polymers.
Analytica Chimica Acta, 390, (1-3), 93-100, (1999)
   

INTERCALATION BASED SENSORS

Ji HS et al., Increasing the sensitivity of piezoelectric odour sensors based on molecularly imprinted polymers.
Biosensors and Bioelectronics, 15, (7-8), 403-409, (2000)
   

Interdigital capacitance transducer

Sontimuang C et al., Interdigitated capacitive biosensor based on molecularly imprinted polymer for rapid detection of Hev b1 latex allergen.
Analytical Biochemistry, 410, (2), 224-233, (2011)
   

Interdigital capacitor

Hayden O et al., Nanolithography and subnanomolecular interactions for biomimetic sensors.
Materials Science and Engineering: C, 26, (5-7), 924-928, (2006)
   

interdigital capacitors

Dickert FL et al., Blood Typing with Synthetic Receptors - Development of a Flow System for Continuous Measurement.
Tm-Technisches Messen, 79, (11), 509-515, (2012)
   

interdigital capacitors

Mujahid A et al., Micro-structured interdigital capacitors with synthetic antibody receptors for ABO blood-group typing.
Sensors and Actuators B: Chemical, 242, 378-383, (2017)
   

interdigital electrodes

Yasinzai M et al., Ion imprinted polymer based receptors for sensitive and selective detection of mercury ions in aqueous environment.
Journal of Sensors, ArticleNo8972549-(2018)
   

interdigital gold electrodes

Latif U et al., Conductometric Sensor for PAH Detection with Molecularly Imprinted Polymer as Recognition Layer.
Sensors, 18, (3), ArticleNo767-(2018)
   

interdigital sensor

Proceeding, Afsarimanesh N et al, Development of molecular imprinted polymer interdigital sensor for C-terminal telopeptide of type I collagen, 

1-5, (2016)
   

interdigital sensor

Proceeding, Alahi MEE et al, Highly selective ion imprinted polymer based interdigital sensor for nitrite detection, 

1-5, (2016)
   

interdigital sensor

Afsarimanesh N et al., Smart Sensing System for Early Detection of Bone Loss: Current Status and Future Possibilities.
Journal of Sensor and Actuator Networks, 7, (1), ArticleNo10-(2018)
   

interdigital sensor

Afsarimanesh N et al., Development of IoT-Based Impedometric Biosensor for Point-of-Care Monitoring of Bone Loss.
IEEE Journal on Emerging and Selected Topics in Circuits and Systems, 8, (2), 211-220, (2018)
   

Interdigital sensors

Zia AI et al., Rapid and molecular selective electrochemical sensing of phthalates in aqueous solution.
Biosensors and Bioelectronics, 67, 342-349, (2015)
   

Interdigital sensors

Afsarimanesh N et al., Molecularly Imprinted Polymer-Based Electrochemical Biosensor for Bone Loss Detection.
IEEE Transactions on Biomedical Engineering, 65, (6), 1264-1271, (2018)
   

Interdigital transducers (IDTs)

Latif U et al., Quality assessment of automotive fuel and oil-improving environmental sustainability.
Sensors and Actuators B: Chemical, 188, 584-589, (2013)
   

inter-digitated conductometry

Suedee R et al., Trichloroacetic acid-imprinted polypyrrole film and its property in piezoelectric quartz crystal microbalance and electrochemical sensors to application for determination of haloacetic acids disinfection by-product in drinking water.
Journal of Applied Polymer Science, 106, (6), 3861-3871, (2007)
   

Interdigitated Electrode

Proceeding, Hawari HF et al, Recognition of Limonene volatile using Interdigitated Electrode molecular imprinted polymer sensor, 

723-726, (2012)
   

Interdigitated Electrode

Hawari HF et al., Development of Interdigitated Electrode Molecular Imprinted Polymer Sensor for Monitoring Alpha Pinene Emissions from Mango Fruit.
Procedia Engineering, 53, 197-202, (2013)
   

interdigitated electrodes

Storer CS et al., Towards Phosphate Detection in Hydroponics Using Molecularly Imprinted Polymer Sensors.
Sensors, 18, (2), ArticleNo531-(2018)
   

interesterification

Yilmaz E, Combining the bioimprinting technique with lipase immobilization for interesterification.
World Journal Of Microbiology & Biotechnology, 18, (7), 621-625, (2002)
   

interesterification

Yilmaz E, Improving the application of microbial lipase by bio-imprinting at substrate-interfaces.
World Journal Of Microbiology & Biotechnology, 18, (1), 37-40, (2002)
   

interesterification

Yilmaz E, Bio-imprinting of microbial lipase at air-water interface.
World Journal Of Microbiology & Biotechnology, 18, (2), 141-145, (2002)
   

interesterification

Yilmaz E, Orlistat-induced molecular bio-imprinting of microbial lipase.
World Journal Of Microbiology & Biotechnology, 19, (2), 161-165, (2003)
   

interface

Rubinstein I et al., Ionic recognition and selective response in self-assembling monolayer membranes on electrodes.
Nature, 332, (6163), 426-429, (1988)
   

interface

Mingarro I et al., Interfacial activation-based molecular bioimprinting of lipolytic enzymes.
Proceedings of the National Academy of Sciences of the United States of America, 92, (8), 3308-3312, (1995)
   

interface

Koide Y, Selective adsorption of metal ions to surface-templated resins prepared by emulsion polymerization using a functional surfactant.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 100-100, (1997)
   

interface

Amundson KR, Imprinting of nematic order at surfaces created by polymerization-induced phase separation.
Physical Review E, 58, (3), 3273-3279, (1998)
   

interface

González-Navarro H et al., Lipase-enhanced activity in flavour ester reactions by trapping enzyme conformers in the presence of interfaces.
Biotechnology and Bioengineering, 59, (1), 122-127, (1998)
   

interface

Chesnut DJ et al., Organic/inorganic composite materials: the roles of organoamine ligands in the design of inorganic solids.
Coordination Chemistry Reviews, 190-192, (1), 737-769, (1999)
   

interface

Markowitz MA et al., Catalytic silica particles via template-directed molecular imprinting.
Langmuir, 16, (4), 1759-1765, (2000)
   

interface

Kapua A et al., Molecularly imprinted polymer thin films and microstructures.
Abstracts of Papers of the American Chemical Society, 221, (IEC), 403-403, (2001)
   

interface

Nickel AML et al., Imprinted poly(acrylic acid) films on cadmium selenide. A composite sensor structure that couples selective amine binding with semiconductor substrate photoluminescence.
Chemistry of Materials, 13, (4), 1391-1397, (2001)
   

interface

Smarsly B et al., Preparation of porous silica materials via sol-gel nanocasting of nonionic surfactants: A mechanistic study on the self-aggregation of amphiphiles for the precise prediction of the mesopore size.
Journal of Physical Chemistry B, 105, (43), 10473-10483, (2001)
   

interface

Hilal N et al., Characterization of molecularly imprinted composite membranes using an atomic force microscope.
Surface And Interface Analysis, 33, (8), 672-675, (2002)
   

interface

Pogorelova SP et al., Selective sensing of triazine herbicides in imprinted membranes using ion-sensitive field-effect transistors and microgravimetric quartz crystal microbalance measurements.
Analyst, 127, (11), 1484-1491, (2002)
   

interface

Yilmaz E, Bio-imprinting of microbial lipase at air-water interface.
World Journal Of Microbiology & Biotechnology, 18, (2), 141-145, (2002)
   

interface

Carter KR et al., Exploring the metal-polymer interface: Electroless plating from imprinted polymer surfaces.
Abstracts of Papers of the American Chemical Society, 226, (COLL), 115-115, (2003)
   

interface

Cui DX et al., Advance and prospect of bionanomaterials.
Biotechnology Progress, 19, (3), 683-692, (2003)
   

interface

de Alda MJL et al., Liquid chromatography-(tandem) mass spectrometry of selected emerging pollutants (steroid sex hormones, drugs and alkylphenolic surfactants) in the aquatic environment.
Journal of Chromatography A, 1000, (1-2), 503-526, (2003)
   

interface

Marx KA, Quartz crystal microbalance: A useful tool for studying thin polymer films and complex biomolecular systems at the solution-surface interface.
Biomacromolecules, 4, (5), 1099-1120, (2003)
   

interface

Shustak G et al., Application of sol-gel technology for electroanalytical sensing.
Electroanalysis, 15, (5-6), 398-408, (2003)
   

interface

Cunliffe D et al., Synthetic and biological polymers - merging the interface.
European Polymer Journal, 40, (1), 5-25, (2004)
   

interface

Maier P et al., Scanning force microscopy study of the morphology of spin-cast molecular-imprinted nylon thin films.
Surface And Interface Analysis, 36, (9), 1340-1343, (2004)
   

interface

Raitman OA et al., Analysis of NAD(P)+ and NAD(P)H cofactors by means of imprinted polymers associated with Au surfaces: A surface plasmon resonance study.
Analytica Chimica Acta, 504, (1), 101-111, (2004)
   

interface

Smith RK et al., Patterning self-assembled monolayers.
Progress in Surface Science, 75, (1-2), 1-68, (2004)
   

interface

Ariga K et al., Intelligent Chiral Sensing Based on Supramolecular and Interfacial Concepts.
Sensors, 10, (7), 6796-6820, (2010)
   

interface

Zhong QS et al., Online desorption of molecularly imprinted stir bar sorptive extraction coupled to high performance liquid chromatography for the trace analysis of triazines in rice.
Journal of Separation Science, 35, (23), 3396-3402, (2012)
   

Interface adhesion layer

Li Z et al., Preparation of a novel ion-imprinted membrane using sodium periodate-oxidized polydopamine as the interface adhesion layer for the direction separation of Li+ from spent lithium-ion battery leaching solution.
Separation and Purification Technology, 277, Article119519-(2021)
   

interface chemistry

Ramamoorthy M et al., Molecular imprinting of cellulose acetate-sulfonated polysulfone blend membranes for Rhodamine B by phase inversion technique.
Journal of Membrane Science, 217, (1-2), 207-214, (2003)
   

interfaces

Rubinstein I et al., Ionic recognition and selective response in self-assembling monolayer membranes on electrodes.
Nature, 332, (6163), 426-429, (1988)
   

interfaces

Mingarro I et al., Interfacial activation-based molecular bioimprinting of lipolytic enzymes.
Proceedings of the National Academy of Sciences of the United States of America, 92, (8), 3308-3312, (1995)
   

interfaces

González-Navarro H et al., Lipase-enhanced activity in flavour ester reactions by trapping enzyme conformers in the presence of interfaces.
Biotechnology and Bioengineering, 59, (1), 122-127, (1998)
   

interfaces

Kapua A et al., Molecularly imprinted polymer thin films and microstructures.
Abstracts of Papers of the American Chemical Society, 221, (IEC), 403-403, (2001)
   

interfaces

Vaihinger D et al., Molecularly imprinted polymer nanospheres as synthetic affinity receptors obtained by miniemulsion polymerisation.
Macromolecular Chemistry And Physics, 203, (13), 1965-1973, (2002)
   

interfaces

Yilmaz E, Bio-imprinting of microbial lipase at air-water interface.
World Journal Of Microbiology & Biotechnology, 18, (2), 141-145, (2002)
   

interfaces

de Alda MJL et al., Liquid chromatography-(tandem) mass spectrometry of selected emerging pollutants (steroid sex hormones, drugs and alkylphenolic surfactants) in the aquatic environment.
Journal of Chromatography A, 1000, (1-2), 503-526, (2003)
   

interfaces

Shustak G et al., Application of sol-gel technology for electroanalytical sensing.
Electroanalysis, 15, (5-6), 398-408, (2003)
   

interfaces

Raitman OA et al., Analysis of NAD(P)+ and NAD(P)H cofactors by means of imprinted polymers associated with Au surfaces: A surface plasmon resonance study.
Analytica Chimica Acta, 504, (1), 101-111, (2004)
   

interfaces

Shen XT et al., Bacterial Imprinting at Pickering Emulsion Interfaces.
Angewandte Chemie International Edition, 53, (40), 10687-10690, (2014)
   

interfaces

Proceeding, González-Vila Á et al, Formaldehyde sensing with plasmonic near-infrared optical fiber grating sensors, 

ArticleNo989917, (2016)
   

interfaces

Stilman W et al., Optimization and characterization of a flow cell for heat-transfer-based biosensing.
physica status solidi (a), 214, (9), ArticleNo1600758-(2017)
   

interfacial activation

González-Navarro H et al., Improving lipase activity in solvent-free media by interfacial activation-based molecular bioimprinting.
Journal of Molecular Catalysis B: Enzymatic, 3, (1-4), 111-119, (1997)
   

inter facial activation

González-Navarro H et al., Lipase-enhanced activity in flavour ester reactions by trapping enzyme conformers in the presence of interfaces.
Biotechnology and Bioengineering, 59, (1), 122-127, (1998)
   

interfacial activation

Kamiya N et al., Preparation of surfactant-coated lipases utilizing the molecular imprinting technique.
Journal of Fermentation and Bioengineering, 85, (2), 237-239, (1998)
   

interfacial activation

Mine Y et al., Structural effects of amphiphiles on Candida rugosa lipase activation by freeze-drying of aqueous solution of enzyme and amphiphile.
Journal of Bioscience and Bioengineering, 96, (6), 525-528, (2003)
   

interfacial activation

Yilmaz E, Orlistat-induced molecular bio-imprinting of microbial lipase.
World Journal Of Microbiology & Biotechnology, 19, (2), 161-165, (2003)
   

interfacial activation

Foresti ML et al., Interfacial activation and bioimprinting of Candida rugosa lipase immobilized on polypropylene: effect on the enzymatic activity in solvent-free ethyl oleate synthesis.
Enzyme and Microbial Technology, 36, (2-3), 338-349, (2005)
   

interfacial activation

Yang JK et al., Combination of bioimprinting and silane precursor alkyls improved the activity of sol-gel-encapsulated lipase.
Enzyme and Microbial Technology, 46, (3-4), 257-261, (2010)
   

interfacial activation

Kartal F, Enhanced esterification activity through interfacial activation and cross-linked immobilization mechanism of Rhizopus oryzae lipase in a nonaqueous medium.
Biotechnology Progress, 32, (4), 899-904, (2016)
   

INTERFACIAL BINDING-PROPERTIES

Kitano H et al., Inclusion of bisphenols by a self-assembled monolayer of thiolated cyclodextrin on a gold electrode.
Langmuir, 18, (15), 5835-5840, (2002)
   

interfacial catalysis

Shen XT et al., Catalytic Formation of Disulfide Bonds in Peptides by Molecularly Imprinted Microgels at Oil/Water Interfaces.
ACS Applied Materials & Interfaces, 8, (44), 30484-30491, (2016)
   

Interfacial molecularly imprinted microspheres

Zhang N et al., Preparation of protein imprinted microspheres using amphiphilic ionic liquid as stabilizer and emulsifier via miniemulsion polymerization.
Chemical Engineering Journal, 317, 356-367, (2017)
   

Interfacial phenomena

Gun’ko VM et al., Cryogels: Morphological, structural and adsorption characterisation.
Advances in Colloid and Interface Science, 187-188, 1-46, (2013)
   

interfacial potentiometry with double poles

Ma MM et al., Interfacial potentiometry with double poles sensor based on molecularly imprinted polymer for monitoring of 4-aminoazobenzene.
International Journal of Environmental Analytical Chemistry, 97, (3), 289-300, (2017)
   

Interferants

Wren SP et al., Preparation of novel optical fibre-based Cocaine sensors using a molecular imprinted polymer approach.
Sensors and Actuators B: Chemical, 193, 35-41, (2014)
   

Interference

Rammika M et al., Dimethylglyoxime based ion-imprinted polymer for the determination of Ni(II) ions from aqueous samples.
Water SA, 37, (3), 321-329, (2011)
   

Interference

Zambrzycka E et al., Studies of ion-imprinted polymers for solid-phase extraction of ruthenium from environmental samples before its determination by electrothermal atomic absorption spectrometry.
Spectrochimica Acta Part B-Atomic Spectroscopy, 66, (7), 508-516, (2011)
   

Interference

Baghel A et al., Synthesis and Characterisation of Ligand Free Cadmium Imprinted Polymer for Sensing of Cd(II) from Aqueous Solution.
Defence Life Science Journal, 4, (3), 153-157, (2019)
   

Interference

Becskereki G et al., The Selectivity of Immunoassays and of Biomimetic Binding Assays with Imprinted Polymers.
International Journal of Molecular Sciences, 22, (19), ArticleNo10552-(2021)
   

Interference-free

Hu Y et al., A ratiometric electrochemiluminescence sensing platform for robust ascorbic acid analysis based on a molecularly imprinted polymer modified bipolar electrode.
Biosensors and Bioelectronics, 167, Article112490-(2020)
   

Interferometry

Edmiston PL et al., Detection of vapor phase trinitrotoluene in the parts-per-trillion range using waveguide interferometry.
Sensors and Actuators B: Chemical, 143, (2), 574-582, (2010)
   

Interferometry

Reddy SM et al., Protein detection using hydrogel-based molecularly imprinted polymers integrated with dual polarisation interferometry.
Sensors and Actuators B: Chemical, 176, 190-197, (2013)
   

Interferometry

Peltomaa R et al., Optical Biosensors for Label-Free Detection of Small Molecules.
Sensors, 18, (12), (2018)
   

interferon

Ertürk G et al., Molecularly imprinted cryogels for human interferon-alpha purification from human gingival fibroblast culture.
Journal of Molecular Recognition, 26, (12), 633-642, (2013)
   

Interferon-alpha

Bie ZJ et al., Selective analysis of interferon-alpha in human serum with boronate affinity oriented imprinting based plastic antibody.
Talanta, 230, Article122338-(2021)
   

Interferon alpha 2a

Chaves AR et al., In-tube solid-phase microextraction with molecularly imprinted polymer to determine interferon alpha 2a in plasma sample by high performance liquid chromatography.
Journal of Chromatography A, 1318, 43-48, (2013)
   

interior modification

Jiang X et al., Selective capture of lanthanum and lead cations over biomass-derived ion-imprinted biomacromolecule adsorbents.
Journal of Molecular Liquids, 291, Article111290-(2019)
   

interleukin-2

Piloto AM et al., Label-free quantum dot conjugates for human protein IL-2 based on molecularly imprinted polymers.
Sensors and Actuators B: Chemical, 304, Article127343-(2020)
   

Interleukin-1β (IL-1β)

Cardoso AR et al., An impedimetric molecularly-imprinted biosensor for Interleukin-1β determination, prepared by in-situ electropolymerization on carbon screen-printed electrodes.
Bioelectrochemistry, 130, Article107287-(2019)
   

Interleukin-6 (IL-6)

Gonçalves MdL et al., Electrochemical Point-of Care (PoC) Determination of Interleukin-6 (IL-6) Using a Pyrrole (Py) Molecularly Imprinted Polymer (MIP) on a Carbon-Screen Printed Electrode (C-SPE).
Analytical Letters, 54, (16), 2611-2623, (2021)
   

intermediate

Sagawa T et al., Catalytic and stereoselective activities of cross-linked polymers imprinted with reaction intermediate for enzyme-like reactions.
Recent Research Developments in Pure & Applied Chemistry, 3, (1), 57-71, (1999)
   

intermediate

Wang P et al., Application of 6-APA molecular imprinted solid-phase extraction column in the detection of penicillins in milk.
Food and Fermentation Industries, 42, (4), 183-188, (2016)
   

Intermediates

Niu BL et al., Intermediate accumulation and toxicity reduction during the selective photoelectrochemical process of atrazine in complex water bodies.
Water Research, 205, Article117663-(2021)
   

Intermolecular bonding

Krupadam RJ et al., Benzo(α)pyrene imprinted polyacrylate nanosurfaces: Adsorption and binding characteristics.
Sensors and Actuators B: Chemical, 124, (2), 444-451, (2007)
   

intermolecular bonds

Mann S et al., Pressure-Stable Imprinted Polymers for Waste Water Remediation.
Polymers, 10, (7), ArticleNo704-(2018)
   

Intermolecular forces

Holguín M et al., Molecular dynamics of the interaction of l-tryptophan with polypyrrole oligomers.
Computational and Theoretical Chemistry, 1147, 29-34, (2019)
   

intermolecular hydrogen bond

Xu S et al., Theoretical study on interaction mechanism between uracil and its molecularly imprinted membrane.
Computers and Applied Chemistry, 24, (6), 847-851, (2007)
   

Intermolecular hydrogen bonding

Yusof NNM et al., Molecularly imprinted polymer particles having coordinated hydrogen bonding in covalent-imprinting for efficient recognition towards vanillin.
Separation and Purification Technology, 122, 341-349, (2014)
   

Intermolecular interaction

Ang QY et al., Configuration control on the shape memory stiffness of molecularly imprinted polymer for specific uptake of creatinine.
Applied Surface Science, 369, 326-333, (2016)
   

Intermolecular interaction

Konishi A et al., Potentiometric and 1H NMR Spectroscopic Studies of Functional Monomer Influence on Histamine-Imprinted Polymer-Modified Potentiometric Sensor Performance.
Journal of Analytical & Bioanalytical Techniques, 8, (5), ArticleNo378-(2017)
   

Intermolecular interaction

Zhang PP et al., Quantum investigation into intermolecular interactions between bisphenol A and 2-vinyl/4-vinylpyridine: Theoretical insight into molecular imprinting complexes.
Computational and Theoretical Chemistry, 1108, 76-85, (2017)
   

intermolecular interactions

Svenson J et al., Spectroscopic studies of the molecular imprinting self-assembly process.
Journal of Molecular Recognition, 11, (1-6), 83-86, (1998)
   

intermolecular interactions

Saloni J et al., Molecularly imprinted polymers for detection of explosives: computational study on molecular interactions of 2,6-dinitrotoluene and methacrylic acid complex.
Structural Chemistry, 21, (6), 1171-1184, (2010)
   

intermolecular interactions

Fernandes LS et al., Rational design of molecularly imprinted polymers for recognition of cannabinoids: A structure-property relationship study.
European Polymer Journal, 71, 364-371, (2015)
   

intermolecular interactions

Khan MS et al., Computational strategies for understanding the nature of interaction in dioxin imprinted nanoporous trappers.
Journal of Molecular Recognition, 28, (7), 427-437, (2015)
   

internal light source

Demir B et al., Tracking Hyaluronan: Molecularly Imprinted Polymer Coated Carbon Dots for Cancer Cell Targeting and Imaging.
ACS Applied Materials & Interfaces, 10, (4), 3305-3313, (2018)
   

Internet

Proceeding, Mamo SK et al, Optimisation and production of a molecular-imprinted-polymer for the electrochemical determination of triacetone triperoxide (TATP), 
Burgess D, Owen G, Rana H, Zamboni R, Kajzar F, Szep AA (Eds.), 
925315, (2014)
   

internet of things (IoT)

Afsarimanesh N et al., Smart Sensing System for Early Detection of Bone Loss: Current Status and Future Possibilities.
Journal of Sensor and Actuator Networks, 7, (1), ArticleNo10-(2018)
   

internet of things (IoT)

Afsarimanesh N et al., Development of IoT-Based Impedometric Biosensor for Point-of-Care Monitoring of Bone Loss.
IEEE Journal on Emerging and Selected Topics in Circuits and Systems, 8, (2), 211-220, (2018)
   

Interpenetrated structure

Florea AM et al., The structure effect upon gallic acid re-binding in molecularly imprinted organosilica.
Journal of Sol-Gel Science and Technology, 76, (3), 529-541, (2015)
   

Interpenetrating Network

Proceeding, Wang JJ et al, Thermoresponsive Ion-Imprinted Hydrogels with Interpenetrating Network Structure for Removal of Heavy Metal Ions, 
In: Advanced Materials Research, Zhang H, Jin D, Zhao XJ (Eds.), 
83-86, (2013)
   

inter-penetrating networks

Yamashita K et al., Two-step imprinting procedure of inter-penetrating polymer network-type stimuli-responsive hydrogel-adsorbents.
Polymer Journal, 35, (7), 545-550, (2003)
   

Interpenetrating networks

Tov OY et al., Molecularly imprinted hydrogel displaying reduced non-specific binding and improved protein recognition.
Journal of Separation Science, 33, (11), 1673-1681, (2010)
   

interpenetrating polymer network

Huang SF, Preparation of PDVB-SO3H/PDVB IPN of Molecularly Imprinted for Theophylline and Study of Energetics Capability.
Journal of Hunan University of Science and Engineering, 27, (11), 191-193, (2006)
   

interpenetrating polymer network

Pan JY et al., A novel Pb(II)-imprinted IPN for selective preconcentration of lead from water and sediments.
International Journal of Environmental Analytical Chemistry, 86, (11), 855-865, (2006)
   

interpenetrating polymer network

Wang S et al., Selective solid-phase extraction of trace copper ions in aqueous solution with a Cu(II)-imprinted interpenetrating polymer network gel prepared by ionic imprinted polymer (IIP) technique.
Microchimica Acta, 154, (1-2), 73-80, (2006)
   

interpenetrating polymer network

Huang SF et al., Synthesis and Its Property of Theophylline Molecules Imprinted PDVB /PAA IPNs.
Journal of Xiangnan University, 29, (2), 77-81, (2008)
   

interpenetrating polymer network

Huang SF et al., Synthesis and Property of Theophylline Molecules Imprinted PDVB/PAA IPNs.
Journal of Huaihua University, 27, (11), 31-33, (2008)
   

interpenetrating polymer network

Huang SF et al., Synthesis Research of Theophylline Molecules Imprinted PDVB-SO3H/PDVB IPNs.
Journal of Hunan University of Science and Engineering, 29, (8), 38-40, (2008)
   

interpenetrating polymer network

Dragan ES, Design and applications of interpenetrating polymer network hydrogels. A review.
Chemical Engineering Journal, 243, 572-590, (2014)
   

interpenetrating polymer network

Nematollahzadeh A et al., Robust and selective nano cavities for protein separation: An interpenetrating polymer network modified hierarchically protein imprinted hydrogel.
Journal of Chromatography A, 1345, 154-163, (2014)
   

interpenetrating polymer network

Asgari S et al., An imprinted interpenetrating polymer network for microextraction in packed syringe of carbamazepine.
Journal of Chromatography A, 1491, 1-8, (2017)
   

interpenetrating polymer network (IPN)

Wang B et al., MMTCA Recognition by Molecular Imprinting in Interpenetrating Polymer Network Hydrogels Based on Poly(acrylic acid) and Poly(vinyl alcohol).
Macromolecular Bioscience, 8, (5), 417-425, (2008)
   

interpenetrating polymer network (IPN)

Wang JJ et al., Modulated ion recognition by thermosensitive ion-imprinted hydrogels with IPN structure.
Materials Letters, 131, 9-11, (2014)
   

interpenetrating polymer network (IPN)

Wang JJ et al., Synthesis and application of ion-imprinted interpenetrating polymer network gel for selective solid phase extraction of Cd2+.
Chemical Engineering Journal, 242, 117-126, (2014)
   

interpenetrating polymer network (IPN)

Wang JJ et al., Adsorption of copper ions by ion-imprinted simultaneous interpenetrating network hydrogel: Thermodynamics, morphology and mechanism.
Applied Surface Science, 305, 412-418, (2014)
   

interpenetrating polymer network (IPN)

Wang JJ et al., Enhanced and selective adsorption of heavy metal ions on ion-imprinted simultaneous interpenetrating network hydrogels.
Designed Monomers and Polymers, 17, (1), 19-25, (2014)
   

interpenetrating polymer network (IPN)

Wang JJ et al., Ion-imprinted interpenetrating network gels for solid-phase extraction of heavy metal ions.
International Journal of Environmental Analytical Chemistry, 96, (14), 1341-1355, (2016)
   

interpenetrating polymer networks

Girija P et al., Sorption of Trace Amounts of Pb(II) Ions on an Ion Imprinted Interpenetrating Polymer Network Based on Alginic Acid and Crosslinked Polyacrylamide.
Separation Science and Technology, 49, (7), 1053-1061, (2014)
   

interpenetrating polymer networks

Hijazi HY et al., Molecularly imprinted polymer thin-film as a micro-extraction adsorbent for selective determination of trace concentrations of polycyclic aromatic sulfur heterocycles in seawater.
Journal of Chromatography A, 1617, Article460824-(2020)
   

Interpenetrating Polymer Networks (IPNs)

Balaji R et al., Design of porous polymeric materials from miscellaneous macromolecular architectures: An overview.
Polymer News, 29, (7), 205-212, (2004)
   

Interspecies discrimination

El-Sharif HF et al., MIP-based protein profiling: A method for interspecies discrimination.
Sensors and Actuators B: Chemical, 241, 33-39, (2017)
   

interval immobilization technique

Kubo T et al., Interval immobilization technique for recognition toward a highly hydrophilic cyanobacterium toxin.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 806, (2), 229-235, (2004)
   

interval immobilization technique

Kubo T et al., Target-selective ion-exchange media for highly hydrophilic compounds: a possible solution by use of the "interval immobilization technique".
Analytical and Bioanalytical Chemistry, 378, (1), 84-88, (2004)
   

Interval recognition

Kubo T et al., Effective determination of a pharmaceutical, sulpiride, in river water by online SPE-LC-MS using a molecularly imprinted polymer as a preconcentration medium.
Journal of Pharmaceutical and Biomedical Analysis, 89, 111-117, (2014)
   

Intra- and self-intermolecular interactions

Cela-Pérez MC et al., A study of competitive molecular interaction effects on imprinting of molecularly imprinted polymers.
Vibrational Spectroscopy, 65, 74-83, (2013)
   

Intracellular leakage

Chen YX et al., Enhanced electrochemiluminescence bioassay triggered by intracellular leakage for detection of Escherichia coli.
Biosensors and Bioelectronics, 194, Article113575-(2021)
   

INTRAMOLECULAR CHARGE-TRANSFER

Wandelt B et al., Fluorescent molecularly imprinted polymer studied by time-resolved fluorescence spectroscopy.
Polymer, 43, (9), 2777-2785, (2002)
   

INTRAMOLECULAR CHARGE-TRANSFER

Wandelt B et al., Steady-state and time-resolved fluorescence studies of fluorescent imprinted polymers.
Journal of Luminescence, 102-103, (1), 774-781, (2003)
   

intramolecular cyclization

Shen XT et al., Catalytic Formation of Disulfide Bonds in Peptides by Molecularly Imprinted Microgels at Oil/Water Interfaces.
ACS Applied Materials & Interfaces, 8, (44), 30484-30491, (2016)
   

intramolecular hydrogen bond

Zhang TL et al., Influence of intramolecular hydrogen bond of templates on molecular recognition of molecularly imprinted polymers.
Analytica Chimica Acta, 450, (1-2), 53-61, (2001)
   

intramolecular hydrogen bond

Huang XD et al., Molecular imprinting of nitrophenol and hydroxybenzoic acid isomers: effect of molecular structure and acidity on imprinting.
Journal of Molecular Recognition, 16, (6), 406-411, (2003)
   

Intramolecular hydrogen bonds

Sun YK et al., A strategy of utilizing Zn(II) as metallic pivot in room temperature ionic liquid to prepare molecularly imprinted polymers for compound with intramolecular hydrogen bonds.
Analytical and Bioanalytical Chemistry, 410, (2), 349-359, (2018)
   

INTRAPARTICLE CONVECTIVE VELOCITY

Buchmeiser MR, New synthetic ways for the preparation of high-performance liquid chromatography supports.
Journal of Chromatography A, 918, (2), 233-266, (2001)
   

Intraparticle diffusion

Kim H et al., Mass transfer kinetics on the heterogeneous binding sites of molecularly imprinted polymers.
Chemical Engineering Science, 60, (20), 5425-5444, (2005)
   

Intraparticle mass transfer

Kim H et al., Intraparticle mass transfer kinetics on molecularly imprinted polymers of structural analogues of a template.
Chemical Engineering Science, 61, (4), 1122-1137, (2006)
   

Intraparticle mass transfer kinetics

Kim H et al., Isotherm parameters and intraparticle mass transfer kinetics on molecularly imprinted polymers in acetonitrile/buffer mobile phases.
Chemical Engineering Science, 61, (16), 5249-5267, (2006)
   

intravenous lipid emulsion

Yousefsani BS et al., Liquid Chromatography Analysis of Clozapine in Rat Brain Tissue, Using its Molecularly Imprinted Polymer after Administration of Toxic Dose of Drug and Lipid Emulsion Therapy.
Current Pharmaceutical Analysis, 15, (3), 251-257, (2019)
   

Intrinsic fluorescence

Fukazawa K et al., Direct observation of selective protein capturing on molecular imprinting substrates.
Biosensors and Bioelectronics, 40, (1), 96-101, (2013)
   

In-tube

Zarejousheghani M et al., A new strategy for synthesis of an in-tube molecularly imprinted polymer-solid phase microextraction device: Selective off-line extraction of 4-nitrophenol as an example of priority pollutants from environmental water samples.
Analytica Chimica Acta, 798, 48-55, (2013)
   

In-tube MIP-SPME fiber

Ansari S et al., Recent progress, challenges and trends in trace determination of drug analysis using molecularly imprinted solid-phase microextraction technology.
Talanta, 164, 612-625, (2017)
   

in-tube solid-phase microextraction

Kataoka H et al., On-line in-tube solid-phase microextraction method and its applications.
Japanese Journal of Forensic Toxicology, 20, (3), 251-267, (2002)
   

in-tube solid-phase microextraction

Kataoka H, New trends in sample preparation for clinical and pharmaceutical analysis.
TrAC Trends in Analytical Chemistry, 22, (4), 232-244, (2003)
   

in-tube solid-phase microextraction

Cruz-Vera M et al., Sorptive microextraction for liquid-chromatographic determination of drugs in urine.
TrAC Trends in Analytical Chemistry, 28, (10), 1164-1173, (2009)
   

in-tube solid-phase microextraction

Zhang SW et al., Molecularly imprinted monolith in-tube solid-phase microextraction coupled with HPLC/UV detection for determination of 8-hydroxy-2’-deoxyguanosine in urine.
Analytical and Bioanalytical Chemistry, 395, (2), 479-487, (2009)
   

In-tube solid phase microextraction

Zhang SW et al., Determination of urinary 8-hydroxy-2’-deoxyguanosine by capillary electrophoresis with molecularly imprinted monolith in-tube solid phase microextraction.
Chinese Chemical Letters, 21, (1), 85-88, (2010)
   

in-tube solid-phase microextraction

Kataoka H et al., Recent advances in SPME techniques in biomedical analysis.
Journal of Pharmaceutical and Biomedical Analysis, 54, (5), 926-950, (2011)
   

in-tube solid-phase microextraction

Book chapter, Kataoka H, 2.29 - Column-Switching Sample Preparation, 
In: Comprehensive Sampling and Sample Preparation, Pawliszyn J (Ed.) 
Academic Press: Oxford, 649-676, (2012)    

in-tube solid-phase microextraction

Moliner-Martinez Y et al., Recent advances of in-tube solid-phase microextraction.
TrAC Trends in Analytical Chemistry, 71, 205-213, (2015)
   

In-tube solid phase microextraction

Asiabi H et al., Preparation and evaluation of a novel molecularly imprinted polymer coating for selective extraction of indomethacin from biological samples by electrochemically controlled in-tube solid phase microextraction.
Analytica Chimica Acta, 913, 76-85, (2016)
   

In-tube solid phase microextraction

Souza ID et al., Selective molecularly imprinted polymer combined with restricted access material for in-tube SPME/UHPLC-MS/MS of parabens in breast milk samples.
Analytica Chimica Acta, 932, 49-59, (2016)
   

In-tube solid-phase microextraction (IT-SPME)

Fang SY et al., Determination of aldehydes in water samples by coupling magnetism-reinforced molecular imprinting monolith microextraction and non-aqueous capillary electrophoresis.
Journal of Chromatography A, 1632, Article461602-(2020)
   

In-tube SPME

Book chapter, Whang CWet al., 3.32 - Recent Advances in Solid-Phase Microextraction for Environmental Applications, 
In: Comprehensive Sampling and Sample Preparation, Pawliszyn J (Ed.) 
Academic Press: Oxford, 629-656, (2012)    

In-tube SPME

Chaves AR et al., In-tube solid-phase microextraction with molecularly imprinted polymer to determine interferon alpha 2a in plasma sample by high performance liquid chromatography.
Journal of Chromatography A, 1318, 43-48, (2013)
   

In-tube SPME

Queiroz MEC et al., Selective capillary coating materials for in-tube solid-phase microextraction coupled to liquid chromatography to determine drugs and biomarkers in biological samples: A review.
Analytica Chimica Acta, 826, 1-11, (2014)
   

In-tube SPME

Sarafraz-Yazdi A et al., Application of molecularly-imprinted polymers in solid-phase microextraction techniques.
TrAC Trends in Analytical Chemistry, 73, 81-90, (2015)
   

In-tube SPME

Marchioni C et al., In-tube solid-phase microextraction with a dummy molecularly imprinted monolithic capillary coupled to ultra-performance liquid chromatography-tandem mass spectrometry to determine cannabinoids in plasma samples.
Analytica Chimica Acta, 1099, 145-154, (2020)
   

Inulin

Kim HS et al., Preparation and release properties of arbutin imprinted inulin/polyvinyl alcohol biomaterials.
International Journal of Biological Macromolecules, 161, 763-770, (2020)
   

Inversed phase gas chromatography

Li H et al., Investigation on Gas Phase Recognition for Metal-Ion Mediated Formaldehyde Imprinted Polymer by Inversed Phase Gas Chromatography.
Chinese Journal of Analytical Chemistry, 42, (6), 885-890, (2014)
   

Inverse emulsion

Zhu F et al., Selective adsorption behavior of Cd(II) ion imprinted polymers synthesized by microwave-assisted inverse emulsion polymerization: Adsorption performance and mechanism.
Journal of Hazardous Materials, 321, 103-110, (2017)
   

Inverse emulsion

Li LW et al., Synthesis, adsorption and selectivity of inverse emulsion Cd(II) imprinted polymers.
Chinese Journal of Chemical Engineering, 26, (3), 494-500, (2018)
   

Inverse gas chromatography

Zhang Y et al., Preparation of Toluene-Imprinted Homogeneous Microspheres and Determination of Their Molecular Recognition Toward Template Vapor by Inverse Gas Chromatography.
Chromatographia, 80, (3), 453-461, (2017)
   

Inverse microemulsion polymerization

Yao J et al., Preparation of metal ion imprinting adsorbent resin by inverse microemulsion polymerization and its performance.
Petrochemical Technology, 37, (4), 397-401, (2008)
   

inverse micro-emulsion polymerization

Li TT et al., Preparation and Study of Dichlorphenol Molecularly Imprinted Polymer.
Guangdong Chemical Industry, 37, (12), 10-12, (2010)
   

Inverse micro-emulsion polymerization approach

Qi JY et al., Preparation and property of microspheric Fe(III) imprinted polymer.
Material Science and Technology, 15, (6), 767-773, (2007)
   

Inverse micro-emulsion polymerization approach

Qi JY et al., Preparation and property of microspheric Fe(III) imprinted polymer.
Materials Science and Technology, 15, (6), 767-769,773, (2007)
   

inverse microemulsion polymerization approach

Su L et al., Preparation and Property of Microspheric Cu(II) Ion Imprinted Polymer.
Journal of Anqing Teachers College (Natural Science Edition), 16, (1), 81-84, (2010)
   

Inverse miniemulsion polymerization

Weber P et al., Nano-MIP based sensor for penicillin G: Sensitive layer and analytical validation.
Sensors and Actuators B: Chemical, 267, 26-33, (2018)
   

inverse opal

Yang ZK et al., Preparation and Characterization of L-Tryptophan Molecularly Imprinted Photonic Hydrogels.
Chemical Journal of Chinese Universities, 37, (1), 37-42, (2016)
   

inverse opal films

Proceeding, Chen ZH et al, Imprinted photonic crystals for levodropropizine sensing, 

Article number 6271015, (2012)
   

inverse opal films

Dai JJ et al., Colloidal crystal templated molecular imprinted polymer for the detection of 2-butoxyethanol in water contaminated by hydraulic fracturing.
Microchimica Acta, 185, (1), ArticleNo32-(2018)
   

Inverse-opal microspheres

Yang WX et al., Fabrication of inverse-opal lysozyme-imprinted polydopamine/polypyrrole microspheres with near-infrared-light-controlled release property.
Journal of Colloid and Interface Science, 548, 37-47, (2019)
   

inverse opal photonic crystal

Zhang XH et al., Novel Biomimic Crystalline Colloidal Array for Fast Detection of Trace Parathion.
ACS Sensors, 2, (7), 1013-1019, (2017)
   

inverse opals

Carbajo MC et al., Micro/nano-structural properties of imprinted macroporous titania and zirconia.
Journal of Materials Chemistry, 13, (9), 2311-2316, (2003)
   

inverse opals

Dabrowski M et al., Hierarchical templating in deposition of semi-covalently imprinted inverse opal polythiophene film for femtomolar determination of human serum albumin.
Biosensors and Bioelectronics, 94, 155-161, (2017)
   

inverse opals

Gam-Derouich S et al., Imprinted Photonic Hydrogels for the Size- and Shell-Selective Recognition of Nanoparticles.
Angewandte Chemie International Edition, 56, (33), 9710-9714, (2017)
   

Inverse opal structure

Chen QS et al., Molecularly imprinted photonic hydrogel sensor for optical detection of L-histidine.
Microchimica Acta, 185, (12), ArticleNo557-(2018)
   

Inverse-phase suspension polymerization

Pan J et al., Recognition property and preparation of Staphylococcus aureus protein A-imprinted polyacrylamide polymers by inverse-phase suspension and bulk polymerization.
Polymer, 50, (11), 2365-2372, (2009)
   

inverse phase suspension polymerization

Zhang J et al., Preparation and characterization of molecularly imprinted polymer of bovine serum albumin.
Journal of Applied Polymer Science, 124, (1), 723-728, (2012)
   

Inverse Pickering emulsion

Ayari MG et al., Synthesis of imprinted hydrogel microbeads by inverse Pickering emulsion to controlled release of adenosine 5’-monophosphate.
Materials Science and Engineering: C, 101, 254-263, (2019)
   

Inverse suspension

Liu CJ et al., Study on preparation of molecularly imprinted polymer microspheres.
Modern Chemical Industry, 26, (SUPPL. 2), 243-246, (2006)
   

Inverse suspension

Xue XH et al., Effect of different preparation condition on SpA-molecularly imprinted polymer microspheres.
Journal of Chinese Electron Microscopy Society, 27, (5), 390-394, (2008)
   

Inverse suspension

Kotrotsiou O et al., On the synthesis of peptide imprinted polymers by a combined suspension--Epitope polymerization method.
Materials Science and Engineering: B, 165, (3), 256-260, (2009)
   

inverse suspension polymerization

Lu SL et al., Study on preparation of protein-imprinted soft-wet gel composite microspheres with magnetic susceptibility and their characteristics. I. Preparation and particle morphology.
Journal of Applied Polymer Science, 100, (1), 684-694, (2006)
   

Inverse suspension polymerization.

Wu H et al., Synthesis and properties of molecularly imprinted spheric β-cyclodextrin polymers.
Ion Exchange and Adsorption, 22, (4), 356-362, (2006)
   

inverse suspension polymerization

Chang HC et al., Studies of theophylline imprinted phenolic resin sorbent.
Acta Polymerica Sinica, (4), 340-346, (2011)
   

inverse suspension polymerization

Meouche W et al., Inverse Suspension Polymerization as a New Tool for the Synthesis of Ion-Imprinted Polymers.
Macromolecular Rapid Communications, 33, (10), 928-932, (2012)
   

inverse suspension polymerization

Laatikainen K et al., Effect of template ion-ligand complex stoichiometry on selectivity of ion-imprinted polymers.
Talanta, 134, 538-545, (2015)
   

inverse suspension polymerization

Meouche W et al., Effect of porogen solvent on the properties of nickel ion imprinted polymer materials prepared by inverse suspension polymerization.
European Polymer Journal, 87, 124-135, (2017)
   

Inverse suspension polymerization technique

Prasad BB et al., Development of surface imprinted nanospheres using the inverse suspension polymerization method for electrochemical ultra sensing of dacarbazine.
Analytica Chimica Acta, 974, 75-86, (2017)
   

INVERSION PRECIPITATION TECHNIQUE

Kanekiyo Y et al., Facile construction of a novel metal-imprinted polymer surface without a polymerisation process.
Journal of the Chemical Society-Perkin Transactions 2, (9), 2005-2008, (1998)
   

INVERSION PRECIPITATION TECHNIQUE

Kanekiyo Y et al., "Molecular-imprinting" in polyion complexes which creates the "memory" for the AMP template.
Journal of the Chemical Society-Perkin Transactions 2, (3), 557-561, (1999)
   

INVERSION PRECIPITATION TECHNIQUE

Piletsky SA et al., Receptor and transport properties of imprinted polymer membranes - a review.
Journal of Membrane Science, 157, (2), 263-278, (1999)
   

INVERSION PRECIPITATION TECHNIQUE

Takeuchi T et al., Separation and sensing based on molecular recognition using molecularly imprinted polymers.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 728, (1), 1-20, (1999)
   

INVERSION PRECIPITATION TECHNIQUE

Kanekiyo Y et al., Novel nucleotide-responsive hydrogels designed from copolymers of boronic acid and cationic units and their applications as a QCM resonator system to nucleotide sensing.
Journal of Polymer Science Part A: Polymer Chemistry, 38, (8), 1302-1310, (2000)
   

INVERSION PRECIPITATION TECHNIQUE

Kobayashi T et al., Molecular imprinting of caffeine and its recognition assay by quartz-crystal microbalance.
Analytica Chimica Acta, 435, (1), 141-149, (2001)
   

INVERSION PRECIPITATION TECHNIQUE

Kobayashi T et al., Molecularly imprinted polysulfone membranes having acceptor sites for donor dibenzofuran as novel membrane adsorbents: Charge transfer interaction as recognition origin.
Chemistry of Materials, 14, (6), 2499-2505, (2002)
   

INVERSION PRECIPITATION TECHNIQUE

Yoshikawa M, Molecularly imprinted polymeric membranes.
Bioseparation, 10, (6), 277-286, (2002)
   

INVERSION PRECIPITATION TECHNIQUE

Yoshikawa M et al., Chiral recognition sites converted from tetrapeptide derivatives adopting racemates as print molecules.
Macromolecular Bioscience, 3, (9), 487-498, (2003)
   

INVERSION PRECIPITATION TECHNIQUE

Blanco-López MC et al., Electrochemical sensing with electrodes modified with molecularly imprinted polymer films.
Analytical and Bioanalytical Chemistry, 378, (8), 1922-1928, (2004)
   

INVERSION PRECIPITATION TECHNIQUE

Park JK et al., Separation of phenylalanine by ultrafiltration using D-Phe imprinted polyacrylonitrile-poly(acrylic acid)-poly(acryl amide) terpolymer membrane.
Korean Journal of Chemical Engineering, 21, (5), 994-998, (2004)
   

INVERSION PRECIPITATION TECHNIQUE

Ulbricht M, Membrane separations using molecularly imprinted polymers.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 113-125, (2004)
   

invertase

Venton DL et al., Entrapment of enzymes using organo-functionalized polysiloxane copolymers.
Biochimica et Biophysica Acta - Protein Structure and Molecular Enzymology, 1250, (2), 117-125, (1995)
   

INVITRO

Zhu LL et al., Selective separation of active inhibitors of epidermal growth factor receptor from Caragana Jubata by molecularly imprinted solid-phase extraction.
Journal of Chromatography A, 991, (2), 151-158, (2003)
   

in vitro

Hashim F et al., In Vitro Toxicity Evaluation of Caffeine Imprinted Polymer (CAF-MIP) for Decaffeination Method on Normal Chang Liver Cells.
Makara Journal of Technology, 21, (1), 19-25, (2017)
   

in vitro diffusion studies

Parisi OI et al., Smart Bandage Based on Molecularly Imprinted Polymers (MIPs) for Diclofenac Controlled Release.
Pharmaceuticals, 11, (4), ArticleNo93-(2018)
   

In vitro drug release

Fareghi AR et al., Synthesis and characterization of a cellulose-based molecularly imprinted polymer in aqueous solution: The study of Furosemide slow release.
Starch - Stärke, 69, (11-12), ArticleNo1700002-(2017)
   

in vitro release studies

Trotta F et al., Molecularly imprinted cyclodextrin nanosponges for the controlled delivery of L-DOPA: perspectives for the treatment of Parkinson’s disease.
Expert Opinion on Drug Delivery, 13, (12), 1671-1680, (2016)
   

In vitro releasing

Lakouraj MM et al., Synthesis, characterization and in-vitro prolonged release of L-DOPA using a novel amphiphilic hydrogel based on sodium alginate-polypyrrole.
International Journal of Biological Macromolecules, 193, 609-618, (2021)
   

in vitro selection

Nicholls IA et al., Some recent developments in the preparation of novel recognition systems: A recognition site for the selective catalysis of an aldol condensation using molecular imprinting and specific affinity motifs for a-chymotrypsin using a phage display peptide library.
Journal of Molecular Recognition, 9, (5-6), 652-657, (1996)
   

IN-VITRO SELECTION

Stevenson JD et al., Catalytic antibodies and other biomimetic catalysts.
Natural Product Reports, 17, (6), 535-577, (2000)
   

in vitro selection

Menger M et al., MIPs and Aptamers for Recognition of Proteins in Biomimetic Sensing.
Biosensors, 6, (3), ArticleNo35-(2016)
   

In vivo

Book chapter, Ge Yet al., Molecularly Imprinted Polymers: Promising Advanced Materials for In Vivo Sensing, 
In: Microelectrode Biosensors, Marinesco S, Dale N (Eds.) 
Humana Press: 369-384, (2013)    

In vivo

Book chapter, Souza-Silva ÉAet al., Recent Advances in Solid-Phase Microextraction for Contaminant Analysis in Food Matrices, 
In: Green Extraction Techniques Principles, Advances and Applications, Ibáñez E, Cifuentes A (Eds.) 
Elsevier: 483-517, (2017)    

In vivo

Jia C et al., Preparation of Dual-Template Epitope Imprinted Polymers for Targeted Fluorescence Imaging and Targeted Drug Delivery to Pancreatic Cancer BxPC-3 Cells.
ACS Applied Materials & Interfaces, 11, (35), 32431-32440, (2019)
   

in vivo sampling

Gao D et al., In Vivo Selective Capture and Rapid Identification of Luteolin and Its Metabolites in Rat Livers by Molecularly Imprinted Solid-Phase Microextraction.
Journal of Agricultural and Food Chemistry, 65, (6), 1158-1166, (2017)
   

in vivo skin measurement

Yenilmez E et al., Formulation, characterization and in vivo efficacy of α-tocopherol imprinted polymeric system for cosmetic application.
European International Journal of Science and Technology, 6, (2), 11-20, (2017)
   

in vivo test

Chiriac AP et al., Semi-imprinting Quercetin into Poly[N,N-Dimethylacrylamide-co-3, 9-divinyl-2, 4, 8, 10-Tetraoxaspiro (5.5) Undecane] Network: Evaluation of the Antioxidant Character.
Journal of Pharmaceutical Sciences, 103, (8), 2338-2346, (2014)
   

Iodine

Birlik Özkütük E et al., Synergistic thallium and iodine memory-based cryogel traps for removing thallium and iodine ions.
Journal of Radioanalytical and Nuclear Chemistry, 314, (3), 2229-2236, (2017)
   

Iodixanol

Liu Z et al., Absorption performance of iodixanol-imprinted polymers in aqueous and blood plasma media.
Acta Biomaterialia, 6, (6), 2003-2012, (2010)
   

ION

Rackow B, Imprinting of molecular information on surfaces of organic high polymers.
Zeitschrift für Chemie, 7, (10), 398-399, (1967)
   

ION

Nishide H et al., Selective adsorption of metal ions on poly(4-vinylpyridine) resins in which the ligand chain is immobilized by crosslinking.
Makromolekulare Chemie-Macromolecular Chemistry And Physics, 177, (8), 2295-2310, (1976)
   

ION

Efendiev AA et al., Preparation of a complexing polymeric sorbent with arrangement of macromolecules favorable for sorbing ion.
Vysokomolekulyarnye Soedineniya Seriya B, 19, (2), 91-92, (1977)
   

ION

Nishide H et al., Adsorption of metal ions on crosslinked poly(4-vinylpyridine) resins prepared with a metal ion as template.
Journal of Polymer Science, Polymer Chemistry Edition, 15, (12), 3023-3029, (1977)
   

ION

Kabanov VA et al., Synthesis and investigation of a complexing sorbent with macromolecule arrangement tuned to ion sorption.
Doklady Akademii Nauk SSSR, 238, (2), 356-358, (1978)
   

ION

Kabanov VA et al., Complex-forming polymeric sorbents with macromolecular arrangement favourable for ion sorption.
Journal of Applied Polymer Science, 24, (1), 259-267, (1979)
   

ION

Belokon YN et al., Biomimetic approach to the design of a pyridoxal enzyme model 1. Hydrophilic polyacrylamide gel with stereochemically defined arrangements of salicaldehyde and lysine fragments.
Makromolekulare Chemie-Macromolecular Chemistry And Physics, 181, (10), 2183-2197, (1980)
   

ION

Efendiev AA et al., Investigation of sorption properties of complexing polymer sorbents adjusted to different ions.
Doklady Akademii Nauk SSSR, 255, (6), 1393-1395, (1980)
   

ION

Kato M et al., Complexation of metal-ion with poly(1-vinylimidazole) resin prepared by radiation-induced polymerization with template metal-ion.
Journal of Polymer Science, Polymer Chemistry Edition, 19, (7), 1803-1809, (1981)
   

ION

Belokon YN et al., Biomimetic approach to the design of a pyridoxal enzyme model .2. Cyclo-copolymerization as a new method of constructing polymers with defined arrangement of functional-groups in the chain.
Makromolekulare Chemie-Macromolecular Chemistry And Physics, 183, (8), 1921-1934, (1982)
   

ION

Gupta SN et al., Template effects in chelating polymers.
Journal of Polymer Science, Polymer Chemistry Edition, 20, (6), 1609-1622, (1982)
   

ION

Sarhan A et al., On polymers with enzyme-analogous structure .14. Stereospecific binding by amide bonding or electrostatic interaction.
Makromolekulare Chemie-Macromolecular Chemistry And Physics, 183, (7), 1603-1614, (1982)
   

ION

Efendiev AA et al., Selective polymer sorbents on the basis of copolymers of dialkyl esters of vinylphosphonic acid and acrylic acid.
Reactive Polymers, Ion Exchangers, Sorbents, 1, (4), 295-300, (1983)
   

ION

Kabanov VA et al., An EPR study of copper(II) complexes with structured polymeric sorbents.
Polymer Science U. S. S. R., 28, (11), 2736-2742, (1986)
   

ION

Nakashima A et al., Metal ion-template syntheses of hybrid resins and the template effect on their selectivities for metal ions.
Memoirs of the Faculty of Science, Kyushu University, Series C., 16, (1), 33-42, (1987)
   

ION

Dong SJ et al., Chloride chemical sensor based on an organic conducting polypyrrole polymer.
Analyst, 113, (10), 1525-1528, (1988)
   

ION

Rubinstein I et al., Ionic recognition and selective response in self-assembling monolayer membranes on electrodes.
Nature, 332, (6163), 426-429, (1988)
   

ION

Rosatzin T et al., Preparation of Ca2+ selective sorbents by molecular imprinting using polymerizable ionophores.
Journal of the Chemical Society-Perkin Transactions 2, (8), 1261-1265, (1991)
   

ION

Chanda M et al., Enhanced copper selectivity and faster sorption kinetics of poly(4-vinylpyridine) crosslinked in presence of copper(II) as template on silica gel.
Reactive Polymers, 16, (2), 149-158, (1992)
   

ION

Weatherhead RH et al., Polyethyleneimine derivatives as catalysts - dye-binding capacity and reactivity are not diminished on extensive internal cross-linking of the polymers.
Journal of Molecular Catalysis, 85, (1), 33-44, (1993)
   

ION

Kriz D et al., Introduction of molecularly imprinted polymers as recognition elements in conductometric chemical sensors.
Sensors and Actuators B: Chemical, 33, (1-3), 178-181, (1996)
   

ION

Matsui J et al., Metal ion mediated recognition in molecularly imprinted polymers.
Analytica Chimica Acta, 335, (1-2), 71-77, (1996)
   

ION

Arnold FH, Imprinting with metal complexes: Selective adsorbents and sensors for aqueous media.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 128-128, (1997)
   

ION

Bzhelyanskiy A et al., A metal ion-templated polymeric sensor for lead.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 29-29, (1997)
   

ION

Dai S et al., Enhancement of uranyl adsorption capacity and selectivity on silica sol-gel glasses via molecular imprinting.
Chemistry of Materials, 9, (11), 2521-2525, (1997)
   

ION

Dai S et al., Spectroscopic probing of adsorption of uranyl to uranyl-imprinted silica sol-gel glass via steady-state and time-resolved fluorescence measurement.
Journal of Physical Chemistry B, 101, (28), 5521-5524, (1997)
   

ION

Fish RH, Metal ion templated polymers. Synthesis and structure of N-(4-vinylbenzyl)-1,4,7-triazacyclononane-metal complexes, polymerization of the metal-monomer complexes with divinylbenzene, and metal ion selectivity studies of the demetalated resins.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 147-147, (1997)
   

ION

Hara T et al., Separation of rare earth metals by imprinted polymers utilizing surface template polymerization.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 30-30, (1997)
   

ION

Jenkins AL et al., Polymer based lanthanide luminescent sensors for the detection of nerve agents.
Analytical Communications, 34, 221-224, (1997)
   

ION

Koide Y, Selective adsorption of meta