Alternatively for mipdatabase quick searches go here

Custom Search

Abstract: Ion imprinted polymer (IIP) materials were prepared for uranyl ion (imprint ion) by forming binary (5,7-dichloroquinoline-8-ol (DCQ) or 4-vinylpyridine (VP)) or ternary (5,7- dichloroquinoline-8-ol and 4-vinylpyridine) complexes in 2- methoxy ethanol (porogen) and copolymerizing in the presence of styrene and divinyl benzene as functional and crosslinking monomers, respectively and 2,2'-azobisisobutyronitrile as initiator. UP particles were obtained by leaching the imprint ion in these polymer materials with 50% (v/v) hydrochloric acid, filtering, drying in an oven at 50degreesC and grinding. Control polymer particles were also prepared under identical conditions. The above synthesized polymer particles were characterized by IR, CHN, X-ray diffraction, and pore size analyses. These leached polymer particles can now pick up uranyl ions from dilute aqueous solutions. The IIP particles obtained with ternary complex of uranyl ion alone gave quantitative enrichment of traces of uranyl ions from dilute aqueous solutions. The optimal pH for quantitative enrichment is 4.5-7.5 and eluted completely with 10 ml of 1.0 M HCl. The retention capacity of uranyl IIP particles was found to be 34.05 mg of uranyl ion per grain of polymer. Further, the percent extraction, distribution ratio, and selectivity coefficients of uranium and other selected inorganic ions were also evaluated. Five replicate determinations of 25 mug of uranium present in 1.0 1 of aqueous solution gave a mean absorbance of 0.036 with a relative standard deviation of 2.50%. The detection limit corresponding to three times the standard deviation of the blank was found to be 5 mug l(-1). (C) 2004 Elsevier B.V. All rights reserved