MIPs logo MIPdatabase      MIP2024 Conference banner, website is now open, register on site for important updates   

Aβ1-40

Urraca JL et al., Polymeric Complements to the Alzheimer’s Disease Biomarker β-Amyloid Isoforms Aβ1-40 and Aβ1-42 for Blood Serum Analysis under Denaturing Conditions.
Journal of the American Chemical Society, 133, (24), 9220-9223, (2011)
   

Aβ1-42

Urraca JL et al., Polymeric Complements to the Alzheimer’s Disease Biomarker β-Amyloid Isoforms Aβ1-40 and Aβ1-42 for Blood Serum Analysis under Denaturing Conditions.
Journal of the American Chemical Society, 133, (24), 9220-9223, (2011)
   

Aβ33-40

Urraca JL et al., Polymeric Complements to the Alzheimer’s Disease Biomarker β-Amyloid Isoforms Aβ1-40 and Aβ1-42 for Blood Serum Analysis under Denaturing Conditions.
Journal of the American Chemical Society, 133, (24), 9220-9223, (2011)
   

Aβ33-42

Urraca JL et al., Polymeric Complements to the Alzheimer’s Disease Biomarker β-Amyloid Isoforms Aβ1-40 and Aβ1-42 for Blood Serum Analysis under Denaturing Conditions.
Journal of the American Chemical Society, 133, (24), 9220-9223, (2011)
   

Aβ-42

Moreira FTC et al., Smart naturally plastic antibody based on poly(α-cyclodextrin) polymer for β-amyloid-42 soluble oligomer detection.
Sensors and Actuators B: Chemical, 240, 229-238, (2017)
   

Aβ-42

Moreira FTC et al., Redox probe-free readings of a β-amyloid-42 plastic antibody sensory material assembled on copper@carbon nanotubes.
Sensors and Actuators B: Chemical, 264, 1-9, (2018)
   

Aβ-42

Moreira FTC et al., Colorimetric cellulose-based test-strip for rapid detection of amyloid β-42.
Microchimica Acta, 188, (10), Article334-(2021)
   

AA

Prasad BB et al., Ascorbic acid imprinted polymer-modified graphite electrode: A diagnostic sensor for hypovitaminosis C at ultra trace ascorbic acid level.
Sensors and Actuators B: Chemical, 160, (1), 418-427, (2011)
   

AA

Roy AK et al., Molecularly imprinted polyaniline film for ascorbic acid detection.
Journal of Molecular Recognition, 24, (4), 700-706, (2011)
   

AA

Jiang DL et al., Preparation and application of acrylamide molecularly imprinted composite solid-phase extraction materials.
Analytical Methods, 4, (11), 3760-3766, (2012)
   

AA

Ji J et al., Synthesis of Acrylamide Molecularly Imprinted Polymers Immobilized on Graphite Oxide through Surface-Initiated Atom Transfer Radical Polymerization.
Analytical Letters, 46, (6), 969-981, (2013)
   

AA

Mehdinia A et al., Design and synthesis of molecularly imprinted polypyrrole based on nanoreactor SBA-15 for recognition of ascorbic acid.
Biosensors and Bioelectronics, 39, (1), 88-93, (2013)
   

AA

Kong Y et al., A novel voltammetric sensor for ascorbic acid based on molecularly imprinted poly(o-phenylenediamine-co-o-aminophenol).
Analytica Chimica Acta, 809, 54-60, (2014)
   

AA

Ma F et al., A molecularly imprinted electrochemical sensor for simultaneous detection of dopamine and ascorbic acid.
Chinese Journal of Analysis Laboratory, 33, (11), 1255-1259, (2014)
   

AA

Sun Q et al., Synthesis of an Organic-Inorganic Hybrid Polymeric Material and its Adsorption Performance Characterization Toward Acrylamide.
Journal of Macromolecular Science, Part B, 53, (4), 683-692, (2014)
   

AA

Zhao XJ et al., Disposable Electrochemical Ascorbic Acid Sensor Based on Molecularly Imprinted Poly(o-phenylenediamine)-Modified Dual Channel Screen-Printed Electrode for Orange Juice Analysis.
Food Analytical Methods, 7, (7), 1557-1563, (2014)
   

AA

Zhai YY et al., Electrochemical Molecular Imprinted Sensors Based on Electrospun Nanofiber and Determination of Ascorbic Acid.
Analytical Sciences, 31, (8), 793-798, (2015)
   

AA

Shrivastav AM et al., A localized and propagating SPR, and molecular imprinting based fiber-optic ascorbic acid sensor using an in situ polymerized polyaniline-Ag nanocomposite.
Nanotechnology, 27, (34), ArticleNo345501-(2016)
   

AA

Yan CL et al., A selective strategy for determination of ascorbic acid based on molecular imprinted copolymer of o-phenylenediamine and pyrrole.
Journal of Electroanalytical Chemistry, 780, 276-281, (2016)
   

AA

Fernandes RS et al., Synthesis and characterization of porous surface molecularly imprinted silica microsphere for selective extraction of ascorbic acid.
Microporous And Mesoporous Materials, 264, 28-34, (2018)
   

AA

Zhang LJ et al., Highly selective and sensitive sensor based on an organic electrochemical transistor for the detection of ascorbic acid.
Biosensors and Bioelectronics, 100, 235-241, (2018)
   

AA

Hu Y et al., A ratiometric electrochemiluminescence sensing platform for robust ascorbic acid analysis based on a molecularly imprinted polymer modified bipolar electrode.
Biosensors and Bioelectronics, 167, Article112490-(2020)
   

AA

Zhang C et al., Preparation of dummy molecularly imprinted polymers based on dextran-modified magnetic nanoparticles Fe3O4 for the selective detection of acrylamide in potato chips.
Food Chemistry, 317, Article126431-(2020)
   

2-AAA

Anirudhan TS et al., Molecularly imprinted electrochemical sensing platform for 2-Aminoadipic acid, a diabetes biomarker.
Reactive and Functional Polymers, 168, Article105056-(2021)
   

AAI

Li F et al., Preparation of magnetic molecularly imprinted polymers functionalized carbon nanotubes for highly selective removal of aristolochic acid.
Journal of Chromatography A, 1602, 168-177, (2019)
   

AAI

Wang LH et al., Dummy molecularly imprinted silica materials for effective removal of aristolochic acid I from kaempfer dutchmanspipe root extract.
Microchemical Journal, 152, Article104463-(2020)
   

AAI

Ye JP et al., Molecularly imprinted ratiometric fluorescent probe for visual and fluorescent determination of aristolochic acid I based on a Schiff-base fluorescent compound.
Microchimica Acta, 187, (11), Article623-(2020)
   

AAI

Zhang YM et al., Preparation of molecularly imprinted polymers-functionalized silica nanoparticles for the separation and recognition of aristolochic acids.
Chinese Journal of Chromatography, 39, (10), 1137-1145, (2021)
   

AAI

Xiong HH et al., Thermosensitive and magnetic molecularly imprinted polymers for selective recognition and extraction of aristolochic acid I.
Food Chemistry, 372, Article131250-(2022)
   

AAP

Vanossi D et al., Electropolymerization of ortho-phenylenediamine. Structural characterisation of the resulting polymer film and its interfacial capacitive behaviour.
Journal of Electroanalytical Chemistry, 710, 22-28, (2013)
   

AAP

Yoon SD et al., Molecularly imprinted polymers for selective separation of acetaminophen and aspirin by using supercritical fluid technology.
Chemical Engineering Journal, 226, 171-180, (2013)
   

AAS

Vanossi D et al., Electropolymerization of ortho-phenylenediamine. Structural characterisation of the resulting polymer film and its interfacial capacitive behaviour.
Journal of Electroanalytical Chemistry, 710, 22-28, (2013)
   

AAs

Yu JJ et al., Determination of urinary aromatic amines in smokers and nonsmokers using a MIPs-SPE coupled with LC-MS/MS method.
Journal of Chromatography B, 958, 130-135, (2014)
   

AAs

Zhang Z et al., Synthesis of dummy-template molecularly imprinted polymer adsorbents for solid phase extraction of aminoglycosides antibiotics from environmental water samples.
Talanta, 208, Article120385-(2020)
   

AB1

Wyszomirski M et al., Molecular modelling of a template substitute and monomers used in molecular imprinting for aflatoxin B1 micro-HPLC analysis.
Molecular Simulation, 38, (11), 892-895, (2012)
   

2-AB

Nezhadali A et al., Computer-assisted sensor design and analysis of 2-aminobenzimidazole in biological model samples based on electropolymerized-molecularly imprinted polypyrrole modified pencil graphite electrode.
Sensors and Actuators B: Chemical, 185, 17-23, (2013)
   

4-ABA

Zheng XY et al., Electrochemical sensor of 4-aminobutyric acid based on molecularly imprinted electropolymer.
Analytical Methods, 4, (2), 482-487, (2012)
   

ABA

Terzopoulou Z et al., Preparation of molecularly imprinted solid-phase microextraction fiber for the selective removal and extraction of the antiviral drug abacavir in environmental and biological matrices.
Analytica Chimica Acta, 913, 63-75, (2016)
   

ABA

Teixeira RA et al., Pipette-tip solid-phase extraction using poly(1-vinylimidazole-co-trimethylolpropane trimethacrylate) as a new molecularly imprinted polymer in the determination of avermectins and milbemycins in fruit juice and water samples.
Food Chemistry, 262, 86-93, (2018)
   

abacavir

Chianella I et al., Computational design and synthesis of molecularly imprinted polymers with high binding capacity for pharmaceutical applications-model case: Adsorbent for abacavir.
Analytica Chimica Acta, 559, (1), 73-78, (2006)
   

abacavir

Terzopoulou Z et al., Preparation of molecularly imprinted solid-phase microextraction fiber for the selective removal and extraction of the antiviral drug abacavir in environmental and biological matrices.
Analytica Chimica Acta, 913, 63-75, (2016)
   

abacavir

Qwane SN et al., Synthesis, Characterization and Application of a Molecularly Imprinted Polymer in Selective Adsorption of Abacavir from Polluted Water.
South African Journal of Chemistry, 73, 84-91, (2020)
   

abamectin

Teixeira RA et al., Pipette-tip solid-phase extraction using poly(1-vinylimidazole-co-trimethylolpropane trimethacrylate) as a new molecularly imprinted polymer in the determination of avermectins and milbemycins in fruit juice and water samples.
Food Chemistry, 262, 86-93, (2018)
   

abietic acid

Chen SN et al., High performance surface-enhanced Raman scattering via dummy molecular imprinting onto silver microspheres.
Chemical Communications, 50, (92), 14331-14333, (2014)
   

abietic acid

Ma FC et al., Ultrasensitive Detection of Malachite Green Using the Coupling Technique of Dummy Molecular Imprinting and Surface-enhanced Raman Scattering.
Chemical Journal of Chinese Universities, 38, (8), 1347-1353, (2017)
   

ABO blood groups

Seifner A et al., Synthetic receptors for selectively detecting erythrocyte ABO subgroups.
Analytica Chimica Acta, 651, (2), 215-219, (2009)
   

ABO-blood typing

Mujahid A et al., Micro-structured interdigital capacitors with synthetic antibody receptors for ABO blood-group typing.
Sensors and Actuators B: Chemical, 242, 378-383, (2017)
   

ABO blood typing

Piletsky SS et al., Development of molecularly imprinted polymers specific for blood antigens for application in antibody-free blood typing.
Chemical Communications, 53, (11), 1793-1796, (2017)
   

ABO subgroups

Seifner A et al., Synthetic receptors for selectively detecting erythrocyte ABO subgroups.
Analytica Chimica Acta, 651, (2), 215-219, (2009)
   

3-ABP

Yu JJ et al., Determination of urinary aromatic amines in smokers and nonsmokers using a MIPs-SPE coupled with LC-MS/MS method.
Journal of Chromatography B, 958, 130-135, (2014)
   

4-ABP

Yu JJ et al., Determination of urinary aromatic amines in smokers and nonsmokers using a MIPs-SPE coupled with LC-MS/MS method.
Journal of Chromatography B, 958, 130-135, (2014)
   

AbP

Cristallini C et al., A new strategy to reduce amyloid deposition using peptide-imprinted membranes.
Journal of Applied Biomaterials & Funtional Materials, 14, (2), e129-e136, (2016)
   

abscisic acid

Bauerle WL et al., The application of molecular imprinting technology in the study of the plant stress response hormone abscisic acid.
Hortscience, 41, (4), 951-951, (2006)
   

abscisic acid

Baldwin P et al., The use of a molecular imprinting tool in the study of the plant stress response hormone abscisic acid.
Hortscience, 42, (4), 993-993, (2007)
   

ABTS

Zhang ZJ et al., Molecular Imprinting on Inorganic Nanozymes for Hundred-fold Enzyme Specificity.
Journal of the American Chemical Society, 139, (15), 5412-5419, (2017)
   

ABZ

Srivastava J et al., A biopolymeric nano-receptor for sensitive and selective recognition of albendazole.
Analytical Methods, 8, (5), 1026-1033, (2016)
   

ABZ

Abidi H et al., A molecularly imprinted polymer coupled with high-performance liquid chromatography-UV for the determination of albendazole in plasma and urine samples: CCD-RSM design.
New Journal of Chemistry, 42, (19), 15937-15945, (2018)
   

ABZ

Bustamante-Rangel M et al., Evaluation of the selectivity of molecularly imprinted polymer cartridges for nitroimidazoles. Application to the simultaneous extraction of nitroimidazoles and benzimidazoles from samples of animal origin.
Microchemical Journal, 172, Article107000-(2022)
   

ABZ-NH2-SO2

Bustamante-Rangel M et al., Evaluation of the selectivity of molecularly imprinted polymer cartridges for nitroimidazoles. Application to the simultaneous extraction of nitroimidazoles and benzimidazoles from samples of animal origin.
Microchemical Journal, 172, Article107000-(2022)
   

ABZSO

da Silva Anacleto S et al., Preparation of an organic-inorganic hybrid molecularly imprinted polymer for effective removal of albendazole sulfoxide enantiomers from aqueous medium.
Journal of Environmental Chemical Engineering, 5, (6), 6179-6187, (2017)
   

ABZSO

Anacleto S et al., Assessment of the Performance of Solid Phase Extraction Based on Pipette Tip Employing a Hybrid Molecularly Imprinted Polymer as an Adsorbent for Enantioselective Determination of Albendazole Sulfoxide.
Journal of Chromatographic Science, 57, (7), 671-678, (2019)
   

ABZSO

Alipanahpour Dil E et al., A new approach for microextraction of trace albendazole sulfoxide drug from the samples of human plasma and urine, and water by the molecularly imprinted polymer nanoparticles combined with HPLC.
Journal of Chromatography B, 1158, Article122249-(2020)
   

ABZ-SO

Bustamante-Rangel M et al., Evaluation of the selectivity of molecularly imprinted polymer cartridges for nitroimidazoles. Application to the simultaneous extraction of nitroimidazoles and benzimidazoles from samples of animal origin.
Microchemical Journal, 172, Article107000-(2022)
   

ABZ-SO2

Bustamante-Rangel M et al., Evaluation of the selectivity of molecularly imprinted polymer cartridges for nitroimidazoles. Application to the simultaneous extraction of nitroimidazoles and benzimidazoles from samples of animal origin.
Microchemical Journal, 172, Article107000-(2022)
   

AC

dos Santos Moretti E et al., A nanocomposite based on multi-walled carbon nanotubes grafted by molecularly imprinted poly(methacrylic acid-hemin) as a peroxidase-like catalyst for biomimetic sensing of acetaminophen.
RSC Advances, 6, (34), 28751-28760, (2016)
   

2-AC

Nakai S et al., Regioselective Molecularly Imprinted Reaction Field for [4 + 4] Photocyclodimerization of 2-Anthracenecarboxylic Acid.
Langmuir, 33, (9), 2103-2108, (2017)
   

AC

Villar-Navarro M et al., Easy, fast and environmental friendly method for the simultaneous extraction of the 16 EPA PAHs using magnetic molecular imprinted polymers (mag-MIPs).
Journal of Chromatography B, 1044-1045, 63-69, (2017)
   

AC

Montaseri H et al., Molecularly imprinted polymer coated quantum dots for fluorescence sensing of acetaminophen.
Materials Today Communications, 17, 480-492, (2018)
   

7-ACA

Zhang L et al., Preparation of 7-ACA Molecularly Imprinted Polymer and Evaluation of Combined Performance.
Chinese Journal of Veterinary Drug, 44, (4), 34-36, (2010)
   

ACA

Canlas CP et al., Shape-selective sieving layers on an oxide catalyst surface.
Nature Chemistry, 4, (12), 1030-1036, (2012)
   

7-ACA

Wang XY et al., Detection of cephalosporins residue in chicken muscles by molecular imprinted solid phase extraction-high performance capillary electrophoresis (MISPE-HPCE).
Jiangsu Journal of Agricultural Sciences, 28, (1), 193-197, (2012)
   

Ace

Song XL et al., Determination of 16 polycyclic aromatic hydrocarbons in seawater using molecularly imprinted solid-phase extraction coupled with gas chromatography-mass spectrometry.
Talanta, 99, 75-82, (2012)
   

acebutolol

Boonjob W et al., Retention and selectivity of basic drugs on solid-phase extraction sorbents: Application to direct determination of β-blockers in urine.
Analytical and Bioanalytical Chemistry, 406, (17), 4207-4215, (2014)
   

ACE-inhibitory peptides

Liu L et al., Amino Acid Imprinted UiO-66s for Highly Recognized Adsorption of Small Angiotensin-Converting-Enzyme-Inhibitory Peptides.
ACS Applied Materials & Interfaces, 11, (26), 23039-23049, (2019)
   

acenaphthene

Lieberzeit PA et al., Polymers imprinted with PAH mixtures-comparing fluorescence and QCM sensors.
Analytical and Bioanalytical Chemistry, 392, (7-8), 1405-1410, (2008)
   

acenaphthene

Krupadam RJ et al., Fluorescence Spectrophotometer Analysis of Polycyclic Aromatic Hydrocarbons in Environmental Samples Based on Solid Phase Extraction Using Molecularly Imprinted Polymer.
Environmental Science & Technology, 43, (8), 2871-2877, (2009)
   

acenaphthene

Song XL et al., Determination of 16 polycyclic aromatic hydrocarbons in seawater using molecularly imprinted solid-phase extraction coupled with gas chromatography-mass spectrometry.
Talanta, 99, 75-82, (2012)
   

acenaphthene

Villar-Navarro M et al., Easy, fast and environmental friendly method for the simultaneous extraction of the 16 EPA PAHs using magnetic molecular imprinted polymers (mag-MIPs).
Journal of Chromatography B, 1044-1045, 63-69, (2017)
   

acenaphthylene

Song XL et al., Determination of 16 polycyclic aromatic hydrocarbons in seawater using molecularly imprinted solid-phase extraction coupled with gas chromatography-mass spectrometry.
Talanta, 99, 75-82, (2012)
   

acenaphthylene

Villar-Navarro M et al., Easy, fast and environmental friendly method for the simultaneous extraction of the 16 EPA PAHs using magnetic molecular imprinted polymers (mag-MIPs).
Journal of Chromatography B, 1044-1045, 63-69, (2017)
   

acephate

Wei CP et al., Ultrasensitively sensing acephate using molecular imprinting techniques on a surface plasmon resonance sensor.
Talanta, 83, (5), 1422-1427, (2011)
   

acephate

Xin JH et al., Simultaneous separation and determination of eight organophosphorous pesticide residues in vegetables through molecularly imprinted solid-phase extraction coupled to gas chromatography.
Journal of Separation Science, 35, (24), 3501-3508, (2012)
   

acephate

Duan YQ et al., A computational approach to design an electrochemical sensor and determination of acephate in aqueous solution based on a molecularly imprinted poly(o-phenylenediamine) film.
Analytical Methods, 5, (22), 6449-6456, (2013)
   

acephate

Wang XL et al., Synthesis of a Novel Imprinted Polymeric Material for Simultaneous Recognition of Methamidophos and Acephate.
Advances in Polymer Technology, 32, (3), Art No. 21357-(2013)
   

acephate

Wang XL et al., Simultaneous Determination of Nine Trace Organophosphorous Pesticide Residues in Fruit Samples Using Molecularly Imprinted Matrix Solid-Phase Dispersion Followed by Gas Chromatography.
Journal of Agricultural and Food Chemistry, 61, (16), 3821-3827, (2013)
   

acephate

Tang QH et al., Development of molecularly imprinted electrochemical sensors based on Fe3O4@MWNT-COOH/CS nanocomposite layers for detecting traces of acephate and trichlorfon.
Analyst, 139, (24), 6406-6413, (2014)
   

acephate

Gao L et al., Determination of Acephate in Vegetables by Magnetic Molecularly Imprinted Polymer Isolation Coupled with High-Performance Liquid Chromatography.
Analytical Letters, 48, (5), 752-765, (2015)
   

acephate

Shi C et al., Biomimetic Enzyme-linked Immunosorbent Assay Using a Hydrophilic Molecularly Imprinted Membrane for Recognition and Fast Determination of Trichlorfon and Acephate Residues in Vegetables.
Food Analytical Methods, 8, (10), 2496-2503, (2015)
   

acephate

Luo XP et al., Molecularly imprinted polymer prepared by Pickering emulsion polymerization for removal of acephate residues from contaminated waters.
Journal of Applied Polymer Science, 133, (15), ArticleNo43126-(2016)
   

acephate

Wang QQ et al., Synthesis and Evaluation of Organic-Inorganic Hybrid Molecularly Imprinted Monolith Column for Selective Recognition of Acephate and Phosphamidon in Vegetables.
Advances in Polymer Technology, 36, (4), 401-408, (2017)
   

acepromazine

Song YP et al., Dummy template molecularly imprinted polymer for solid phase extraction of phenothiazines in meat based on computational simulation.
Food Chemistry, 233, 422-428, (2017)
   

acesulfame

Moein MM et al., Fabrication of a novel electrospun molecularly imprinted nanomembrane coupled with high-performance liquid chromatography for the selective separation and determination of acesulfame.
Journal of Separation Science, 38, (8), 1372-1379, (2015)
   

acesulfame

Moein MM et al., Molecularly imprinted sol-gel nanofibers based solid phase microextraction coupled on-line with high performance liquid chromatography for selective determination of acesulfame.
Talanta, 134, 340-347, (2015)
   

acesulfame

Zarejousheghani M et al., Ion-exchange molecularly imprinted polymer for the extraction of negatively charged acesulfame from wastewater samples.
Journal of Chromatography A, 1411, 23-33, (2015)
   

acesulfame

Zarejousheghani M et al., A new strategy for accelerated extraction of target compounds using molecularly imprinted polymer particles embedded in a paper-based disk.
Journal of Molecular Recognition, 31, (3), ArticleNoe2629-(2018)
   

Acesulfame-K

Zarejousheghani M et al., Negative electrospray ionization ion mobility spectrometry combined with paper-based molecular imprinted polymer disks: A novel approach for rapid target screening of trace organic compounds in water samples.
Talanta, 190, 47-54, (2018)
   

ACET

Viveiros R et al., Green strategy to produce large core-shell affinity beads for gravity-driven API purification processes.
Journal of Industrial and Engineering Chemistry, 54, 341-349, (2017)
   

acetaldehyde

Rajabi Khorrami A et al., Synthesis of molecularly imprinted monolithic fibers for solid-phase microextraction of acetaldehyde from head-space of beverages stored in PET bottles.
Talanta, 86, (1), 58-63, (2011)
   

acetaldehyde

Debliquy M et al., Acetaldehyde Chemical Sensor based on Molecularly Imprinted Polypyrrole.
Procedia Engineering, 168, 569-573, (2016)
   

acetaldehyde

Li YL et al., Determination of carbonyl pollutants adsorbed on ambient particulate matter of type PM2.5 by using magnetic molecularly imprinted microspheres for sample pretreatment and capillary electrophoresis for separation and quantitation.
Microchimica Acta, 185, (2), ArticleNo122-(2018)
   

acetamide

Székely G et al., Removal of potentially genotoxic acetamide and arylsulfonate impurities from crude drugs by molecular imprinting.
Journal of Chromatography A, 1240, (1), 52-58, (2012)
   

acetamide

Viveiros R et al., Development of a molecularly imprinted polymer for a pharmaceutical impurity in supercritical CO2: Rational design using computational approach.
Journal of Cleaner Production, 168, 1025-1031, (2017)
   

acetamide

Viveiros R et al., Green strategy to produce large core-shell affinity beads for gravity-driven API purification processes.
Journal of Industrial and Engineering Chemistry, 54, 341-349, (2017)
   

acetamide

Viveiros R et al., Green approach on the development of lock-and-key polymers for API purification.
Chemical Engineering Journal, 308, 229-239, (2017)
   

acetamide

Viveiros R et al., Green Development of Polymeric Dummy Artificial Receptors with Affinity for Amide-Based Pharmaceutical Impurities.
ACS Sustainable Chemistry & Engineering, 7, (18), 15445-15451, (2019)
   

4-acetamido-2-ethoxybenzoic acid methyl ester

Khorrami AR et al., Synthesis and Evaluation of a Molecularly Imprinted Polymer for Solid Phase Extraction of Ethopabate from Chicken Tissue.
Separation Science and Technology, 45, (3), 404-412, (2010)
   

4-acetamidophenol

Rosengren-Holmberg JP et al., Synthesis and ligand recognition of paracetamol selective polymers: semi-covalent versus non-covalent molecular imprinting.
Organic & Biomolecular Chemistry, 7, (15), 3148-3155, (2009)
   

4-acetamidophenol

Liu Y et al., Rational Design and Study on Recognition Property of Paracetamol-Imprinted Polymer.
Applied Biochemistry and Biotechnology, 160, (2), 328-342, (2010)
   

4-Acetamidophenol

Vanossi D et al., Electropolymerization of ortho-phenylenediamine. Structural characterisation of the resulting polymer film and its interfacial capacitive behaviour.
Journal of Electroanalytical Chemistry, 710, 22-28, (2013)
   

4-acetamidophenyl-(4-vinylphenyl) carbonate

Rosengren-Holmberg JP et al., Synthesis and ligand recognition of paracetamol selective polymers: semi-covalent versus non-covalent molecular imprinting.
Organic & Biomolecular Chemistry, 7, (15), 3148-3155, (2009)
   

acetaminophen

Guo HS et al., Studies of selective enrichment and recognized characteristics of paracetamol molecular template polymer.
Chemical Journal of Chinese Universities, 21, (3), 363-367, (2000)
   

acetaminophen

Gómez-Caballero A et al., Paracetamol voltammetric microsensors based on electrocopolymerized-molecularly imprinted film modified carbon fiber microelectrodes.
Analyst, 130, (7), 1012-1018, (2005)
   

acetaminophen

Ma XX et al., Binding selectivity and permeation characterization of molecularly imprinted polymer membranes with paracetamol as template.
Acta Chimica Sinica, 64, (23), 2369-2374, (2006)
   

acetaminophen

Wang CH et al., Electrochemical sensor for acetaminophen based on an imprinted TiO2 thin film prepared by liquid phase deposition.
Microchimica Acta, 158, (3), 307-313, (2007)
   

acetaminophen

Rosengren-Holmberg JP et al., Synthesis and ligand recognition of paracetamol selective polymers: semi-covalent versus non-covalent molecular imprinting.
Organic & Biomolecular Chemistry, 7, (15), 3148-3155, (2009)
   

acetaminophen

Liu Y et al., Rational Design and Study on Recognition Property of Paracetamol-Imprinted Polymer.
Applied Biochemistry and Biotechnology, 160, (2), 328-342, (2010)
   

acetaminophen

Wang MJ et al., Preparation of electrochemical sensor for paracetamol based on molecular imprinted film.
Chemical Research and Application, 23, (7), 888-892, (2011)
   

acetaminophen

Cao HB et al., Determination of Paracetamol on Molecular Imprinted-Carbon Nanotubes Modified Electrode.
Chinese Journal of Spectroscopy Laboratory, 29, (2), 1241-1244, (2012)
   

acetaminophen

Zhou Q et al., Electrochemical behavior and determination of paracetamol at molecular imprinted film modified glassy carbon electrode.
Journal of Instrumental Analysis, 31, (5), 589-592, (2012)
   

acetaminophen

Fan CH et al., Research on Amphiphilic Copolymer MIP micelles electrochemical sensor.
Acta Chimica Sinica, 71, (6), 934-940, (2013)
   

acetaminophen

Luo J et al., A novel electrochemical sensor for paracetamol based on molecularly imprinted polymeric micelles.
Sensors and Actuators B: Chemical, 188, 909-916, (2013)
   

acetaminophen

Morais EC et al., Selective silica-based sorbent materials synthesized by molecular imprinting for adsorption of pharmaceuticals in aqueous matrices.
Journal of Separation Science, 36, (3), 636-643, (2013)
   

acetaminophen

Wang XH et al., Paracetamol Sensor Based on Molecular Imprinting by Photosensitive Polymers.
Electroanalysis, 25, (8), 1907-1916, (2013)
   

acetaminophen

Yoon SD et al., Molecularly imprinted polymers for selective separation of acetaminophen and aspirin by using supercritical fluid technology.
Chemical Engineering Journal, 226, 171-180, (2013)
   

acetaminophen

Zhu AH et al., Sol-Gel Imprinted Polymers Based Electrochemical Sensor for Paracetamol Recognition and Detection.
Analytical Letters, 46, (7), 1132-1144, (2013)
   

acetaminophen

Azodi-Deilami S et al., Magnetic molecularly imprinted polymer nanoparticles for the solid-phase extraction of paracetamol from plasma samples, followed its determination by HPLC.
Microchimica Acta, 181, (15-16), 1823-1832, (2014)
   

acetaminophen

Luo J et al., One-pot synthesis of a graphene oxide coated with an imprinted sol-gel for use in electrochemical sensing of paracetamol.
Microchimica Acta, 181, (11-12), 1257-1266, (2014)
   

acetaminophen

Peng YY et al., An electrochemical sensor for paracetamol based on an electropolymerized molecularly imprinted o-phenylenediamine film on a multi-walled carbon nanotube modified glassy carbon electrode.
Analytical Methods, 6, (15), 5673-5681, (2014)
   

acetaminophen

Mistry J et al., Analysis of cooperative interactions in molecularly imprinted polymer nanoparticles.
Molecular Imprinting, 3, (1), 55-64, (2015)
   

acetaminophen

Teng Y et al., Electrochemical sensor for paracetamol recognition and detection based on catalytic and imprinted composite film.
Biosensors and Bioelectronics, 71, 137-142, (2015)
   

acetaminophen

Dai YL et al., Voltammetric determination of paracetamol using a glassy carbon electrode modified with Prussian Blue and a molecularly imprinted polymer, and ratiometric read-out of two signals.
Microchimica Acta, 183, (10), 2771-2778, (2016)
   

acetaminophen

dos Santos Moretti E et al., A nanocomposite based on multi-walled carbon nanotubes grafted by molecularly imprinted poly(methacrylic acid-hemin) as a peroxidase-like catalyst for biomimetic sensing of acetaminophen.
RSC Advances, 6, (34), 28751-28760, (2016)
   

acetaminophen

Luo J et al., Preparation of water-compatible molecular imprinted conductive polyaniline nanoparticles using polymeric micelle as nanoreactor for enhanced paracetamol detection.
Chemical Engineering Journal, 283, 1118-1126, (2016)
   

acetaminophen

Luo J et al., Synthesis of Water-Dispersible Molecularly Imprinted Electroactive Nanoparticles for the Sensitive and Selective Paracetamol Detection.
ACS Applied Materials & Interfaces, 8, (32), 21028-21038, (2016)
   

acetaminophen

Yarman A et al., MIP-esterase/Tyrosinase Combinations for Paracetamol and Phenacetin.
Electroanalysis, 28, (9), 2222-2227, (2016)
   

acetaminophen

Lee SH et al., Design of size-tunable molecularly imprinted polymer for selective adsorption of acetaminophen.
Clean Technologies and Environmental Policy, 19, (1), 243-250, (2017)
   

acetaminophen

Liu QF et al., Synthesis and Research of Adsorption Capability of Acetaminophen Molecularly Imprinted Polymer.
Technology and Development of Chemical Industry, (1), 13-16, (2017)
   

acetaminophen

Morais EC et al., Imprinted silicas for paracetamol preconcentration prepared by the sol-gel process.
Journal of Sol-Gel Science and Technology, 83, (1), 90-99, (2017)
   

acetaminophen

Wei YB et al., Nanosized Difunctional Photo Responsive Magnetic Imprinting Polymer for Electrochemically Monitored Light-Driven Paracetamol Extraction.
ACS Applied Materials & Interfaces, 9, (50), 44114-44123, (2017)
   

acetaminophen

Cantarella M et al., Selective photodegradation of paracetamol by molecularly imprinted ZnO nanonuts.
Applied Catalysis B: Environmental, 238, 509-517, (2018)
   

acetaminophen

Huang J et al., Green Synthesis of Water-Compatible Fluorescent Molecularly Imprinted Polymeric Nanoparticles for Efficient Detection of Paracetamol.
ACS Sustainable Chemistry & Engineering, 6, (8), 9760-9770, (2018)
   

acetaminophen

Jafari MT et al., Magnetic Dual-template Molecularly Imprinted Polymer Nanoparticles for the Simultaneous Determination of Acetaminophen and Codeine in Urine Samples by Ion Mobility Spectrometry.
Analytical Sciences, 34, (3), 297-303, (2018)
   

acetaminophen

Menon S et al., A voltammetric sensor for acetaminophen based on electropolymerized-molecularly imprinted poly(o-aminophenol) modified gold electrode.
Talanta, 179, 668-675, (2018)
   

acetaminophen

Montaseri H et al., Molecularly imprinted polymer coated quantum dots for fluorescence sensing of acetaminophen.
Materials Today Communications, 17, 480-492, (2018)
   

acetaminophen

Tan K et al., Water-dispersible molecularly imprinted nanohybrids via co-assembly of carbon nanotubes with amphiphilic copolymer and photocrosslinking for highly sensitive and selective paracetamol detection.
Biosensors and Bioelectronics, 117, 713-719, (2018)
   

acetaminophen

Xi WJ et al., Vibrational Frequency Shifts for Monitoring Noncovalent Interactions between Molecular Imprinted Polymers and Analgesics.
The Journal of Physical Chemistry C, 122, (40), 23068-23077, (2018)
   

acetaminophen

Abbasi S et al., Bio-dispersive liquid liquid microextraction based on nano rhamnolipid aggregates combined with molecularly imprinted-solid phase extraction for selective determination of paracetamol in human urine samples followed by HPLC.
Microchemical Journal, 146, 106-114, (2019)
   

acetaminophen

Mulyasuryani A et al., Simultaneous Voltammetric Detection of Acetaminophen and Caffeine Base on Cassava Starch-Fe3O4 Nanoparticles Modified Glassy Carbon Electrode.
Chemosensors, 7, (4), ArticleNo49-(2019)
   

acetaminophen

Sun YF et al., A selective molecularly imprinted electrochemical sensor with GO@COF signal amplification for the simultaneous determination of sulfadiazine and acetaminophen.
Sensors and Actuators B: Chemical, 300, Article126993-(2019)
   

acetaminophen

Su CL et al., A highly sensitive sensor based on a computer-designed magnetic molecularly imprinted membrane for the determination of acetaminophen.
Biosensors and Bioelectronics, 148, Article111819-(2020)
   

acetaminophen

Alanazi K et al., Disposable paracetamol sensor based on electroactive molecularly imprinted polymer nanoparticles for plasma monitoring.
Sensors and Actuators B: Chemical, 329, Article129128-(2021)
   

acetaminophen

Mpayipheli N et al., Vortex-Assisted Dispersive Molecularly Imprinted Polymer-Based Solid Phase Extraction of Acetaminophen from Water Samples Prior to HPLC-DAD Determination.
Separations, 8, (10), ArticleNo194-(2021)
   

acetaminophen

Yang LT et al., Ionic liquid functionalized 3D graphene-carbon nanotubes-AuPd nanoparticles-molecularly imprinted copolymer based paracetamol electrochemical sensor: Preparation, characterization and application.
Talanta, 224, Article121845-(2021)
   

4-acetaminophenol

Fan CH et al., Research on Amphiphilic Copolymer MIP micelles electrochemical sensor.
Acta Chimica Sinica, 71, (6), 934-940, (2013)
   

acetamiprid

Liu B et al., Preparations and Characters for Acetamiprid of Molecular Imprinted Polymer Electrochemical Sensors.
Electrochemistry (China), (3), 323-328, (2011)
   

acetamiprid

Silva CF et al., Computational study on acetamiprid-molecular imprinted polymer.
Journal of Molecular Modeling, 25, (4), Article104-(2019)
   

acetamiprid

Chen JY et al., The synthesis of a dual-template surface molecularly imprinted polymer based on silica gel and its application in the removal of pesticides from tea polyphenols.
Analytical Methods, 12, (7), 996-1004, (2020)
   

acetamiprid

Chen JY et al., Dummy template surface molecularly imprinted polymers based on silica gel for removing imidacloprid and acetamiprid in tea polyphenols.
Journal of Separation Science, 43, (12), 2467-2476, (2020)
   

acetamiprid

Ghani SM et al., Preparation and comparison of molecularly imprinted polymer fluorimetric nanoprobe based on polymer dots and carbon quantum dots for determination of acetamiprid using response surface method.
Microchimica Acta, 187, (5), Article294-(2020)
   

acetamiprid

Yu QR et al., Fluorometric determination of acetamiprid using molecularly imprinted upconversion nanoparticles.
Microchimica Acta, 187, (4), Article222-(2020)
   

acetanilide

Lu CY et al., Molecularly imprinted polymer with calix[4]arene derivative for the recognition of acetanilide.
Chinese Journal of Chemistry, 22, (3), 275-278, (2004)
   

acetanilide

Fan SL et al., Preparation of Molecularly Imprinted Polymer and Its Recognition Property for Acetanilide.
Asian Journal of Chemistry, 26, (18), 6039-6042, (2014)
   

acetaniprid

Li L et al., Adsorption characteristic of acetaniprid-imprinted polymer.
Ion Exchange and Adsorption, 21, (2), 168-173, (2005)
   

acetazolamide

Khodadadian M et al., Computer-assisted design and synthesis of molecularly imprinted polymers for selective extraction of acetazolamide from human plasma prior to its voltammetric determination.
Talanta, 81, (4-5), 1446-1453, (2010)
   

acetazolamide

Ribeiro A et al., Receptor-based biomimetic NVP/DMA contact lenses for loading/eluting carbonic anhydrase inhibitors.
Journal of Membrane Science, 383, (1-2), 60-69, (2011)
   

aceteminophen

Hu SG et al., Study of paracetamol molecularly imprinted polymers applied to solid phase extraction.
Acta Chimica Sinica, 62, (9), 864-868, (2004)
   

acetic acid

Suedee R et al., The use of trichloroacetic acid imprinted polymer coated quartz crystal microbalance as a screening method for determination of haloacetic acids in drinking water.
Talanta, 70, (1), 194-201, (2006)
   

acetic acid

Proceeding, Ge LP et al, Flexible Gas Sensor Array Based on Matrix of Molecularly Imprinted Materials and Full Printing Process, 
765-768, (2019)
   

acetildenafil

Chen FF et al., Magnetic molecularly imprinted polymer for the selective extraction of sildenafil, vardenafil and their analogs from herbal medicines.
Talanta, 115, 482-489, (2013)
   

acetochlor

Dong CK et al., Development of a model for the rational design of molecular imprinted polymer: Computational approach for combined molecular dynamics/quantum mechanics calculations.
Analytica Chimica Acta, 647, (1), 117-124, (2009)
   

acetochlor

Hu XG et al., Novel liquid-liquid-solid microextraction method with molecularly imprinted polymer-coated stainless steel fiber for aqueous sample pretreatment.
Journal of Chromatography A, 1218, (25), 3935-3939, (2011)
   

acetochlor

Wang Y et al., Molecularly imprinted solid-phase extraction coupled with gas chromatography for the determination of four chloroacetamide herbicides in soil.
Analytical Methods, 7, (15), 6411-6418, (2015)
   

acetochlor

Ji WH et al., Selective solid phase extraction of chloroacetamide herbicides from environmental water samples by amphiphilic magnetic molecularly imprinted polymers.
Talanta, 170, 111-118, (2017)
   

acetochlor

Myburgh P et al., Selective Solid-Phase Extraction Using Molecularly Imprinted Polymers for the Analysis of Target Pesticides in Cannabis Bud.
South African Journal of Chemistry, 75, 142-149, (2021)
   

acetoguanamine

Ivanova-Mitseva PK et al., Cubic Molecularly Imprinted Polymer Nanoparticles with a Fluorescent Core.
Angewandte Chemie International Edition, 51, (21), 5196-5199, (2012)
   

acetominophen

Yang ML et al., Molecularly imprinted polymers with p-acetaminophenol and its positional isomers as templates.
Analytical Letters, 37, (10), 2043-2052, (2004)
   

acetominophen

Özcan L et al., Determination of paracetamol based on electropolymerized-molecularly imprinted polypyrrole modified pencil graphite electrode.
Sensors and Actuators B: Chemical, 127, (2), 362-369, (2007)
   

acetominophen

Cervini P et al., Evaluation of the Analytical Potentialities of a Composite Electrode Modified with Molecularly Imprinted Polymers.
Analytical Letters, 42, (13), 1940-1957, (2009)
   

acetone

Tan WH et al., Fabrication of a SnO2-Based Acetone Gas Sensor Enhanced by Molecular Imprinting.
Sensors, 15, (1), 352-364, (2015)
   

acetone

Abdelghani R et al., Nano-architecture of highly sensitive SnO2-based gas sensors for acetone and ammonia using molecular imprinting technique.
Sensors and Actuators B: Chemical, 297, Article126668-(2019)
   

acetone

Wang C et al., Molecular imprinting Ag-LaFeO3 spheres for highly sensitive acetone gas detection.
Materials Research Bulletin, 109, 265-272, (2019)
   

acetophenone

Palaprat G et al., Introduction of unusual properties into polymers by the use of liquid-crystalline moieties.
Polymer International, 55, (10), 1191-1198, (2006)
   

acetophenone

Binet C et al., Benefit of liquid crystal moieties in the MIP technique.
Analytica Chimica Acta, 591, (1), 1-6, (2007)
   

acetophenone

Kolarz BN et al., Catalytic activity of molecular imprinted vinylpyridine/acrylonitrile/divinylbenzene terpolymers with guanidyl ligands-Cu(II) inside the active centres.
Polimery, 53, (11-12), 848-853, (2008)
   

acetophenone

Imahashi M et al., Concentrating materials covered by molecular imprinted nanofiltration layer with reconfigurability prepared by a surface sol-gel process for gas-selective detection.
Journal of Colloid and Interface Science, 406, 186-195, (2013)
   

acetylated histone

Zhang TQ et al., Simultaneous detection of site-specific histone methylations and acetylation assisted by single template oriented molecularly imprinted polymers.
Analyst, 145, (4), 1376-1383, (2020)
   

acetylated lysine

Yang FF et al., An artificial receptor synthesized by surface-confined imprinting for the recognition of acetylation on histone H4 K16.
Chemical Communications, 51, (36), 7673-7676, (2015)
   

acetylated metabolites of sulfonamide antibiotics

Chen HY et al., Fast determination of sulfonamides and their acetylated metabolites from environmental water based on magnetic molecularly imprinted polymers.
Environmental Science and Pollution Research, 20, (12), 8567-8578, (2013)
   

acetylcholine

Demirci G et al., A selective molecularly imprinted polymer for immobilization of acetylcholinesterase (AChE): an active enzyme targeted and efficient method.
Journal of Molecular Recognition, 28, (11), 645-650, (2015)
   

acetylcholine

Sacramento AS et al., Novel biomimetic composite material for potentiometric screening of acetylcholine, a neurotransmitter in Alzheimer’s disease.
Materials Science and Engineering: C, 79, 541-549, (2017)
   

acetylcholinesterase

Jetzschmann KJ et al., Vectorially Imprinted Hybrid Nanofilm for Acetylcholinesterase Recognition.
Advanced Functional Materials, 25, (32), 5178-5183, (2015)
   

acetylcholinesterase

Qi JF et al., A novel acetylcholinesterase biosensor with dual-recognized strategy based on molecularly imprinted polymer.
Sensors and Actuators B: Chemical, 337, Article129760-(2021)
   

acetyl-homoserine lactone

Susmel S et al., Selectivity and Efficiency of Conductive Molecularly Imprinted Polymer (c-MIP) Based on 5-Phenyl-Dipyrromethane and 5-Phenol-Dipyrromethane for Quorum Sensing Precursors Detection.
Chemosensors, 5, (1), ArticleNo5-(2017)
   

Acetyl-HS

Susmel S et al., Selectivity and Efficiency of Conductive Molecularly Imprinted Polymer (c-MIP) Based on 5-Phenyl-Dipyrromethane and 5-Phenol-Dipyrromethane for Quorum Sensing Precursors Detection.
Chemosensors, 5, (1), ArticleNo5-(2017)
   

acetyl 11-ketoboswellic acid

Lakka A et al., Isolation of hypoxia-inducible factor 1 (HIF-1) inhibitors from frankincense using a molecularly imprinted polymer.
Investigational New Drugs, 29, (5), 1081-1089, (2011)
   

acetyl-L-tryptophan ethyl ester

Ramström O et al., Recognition sites incorporating both pyridinyl and carboxy functionalities prepared by molecular imprinting.
Journal of Organic Chemistry, 58, (26), 7562-7564, (1993)
   

acetylsalicylic acid

Hu XG et al., Synthesis and Research of Molecule Recognition Capability of Aspirin Molecularly Imprinted Polymer.
Fine Chemicals, 22, (1), 1-4, (2005)
   

acetylsalicylic acid

Duarte ARC et al., Supercritical fluid polymerisation and impregnation of molecularly imprinted polymers for drug delivery.
Journal of Supercritical Fluids, 39, (1), 102-106, (2006)
   

acetylsalicylic acid

Liu YM et al., Synthesis and Evaluation of Molecularly Imprinted Polymers Using Acetylsalicylic Acid as Template.
Journal of Instrumental Analysis, 26, (2), 165-169, (2007)
   

acetylsalicylic acid

Liu XH et al., Study on aspirin-MAA hydrogel MIP system.
Chinese Journal of Reactive Polymers, 17, (2), 109-112, (2008)
   

acetyl salicylic acid

Kan XW et al., Magnetic molecularly imprinted polymer for aspirin recognition and controlled release.
Nanotechnology, 20, (16), Article No. 165601-(2009)
   

Acetylsalicylic acid

Proceeding, Ameli A et al, Nanosructured conducting molecularly imprinted polymer for selective extraction of salicylate from urine and serum samples by electrochemically controlled solid-phase micro-extraction, 
(2011)
   

acetylsalicylic acid

Proceeding, Chu HJ et al, Synthesis and Performance of Molecular Imprinted Polymers as Drug Release Controller, 
In: Applied Mechanics and Materials, Zhao H (Ed.), 446-449, (2011)
   

acetylsalicylic acid

Wang ZH et al., Acetylsalicylic acid electrochemical sensor based on PATP-AuNPs modified molecularly imprinted polymer film.
Talanta, 85, (3), 1672-1679, (2011)
   

acetylsalicylic acid

Vanossi D et al., Electropolymerization of ortho-phenylenediamine. Structural characterisation of the resulting polymer film and its interfacial capacitive behaviour.
Journal of Electroanalytical Chemistry, 710, 22-28, (2013)
   

acetylsalicylic acid

Yoon SD et al., Molecularly imprinted polymers for selective separation of acetaminophen and aspirin by using supercritical fluid technology.
Chemical Engineering Journal, 226, 171-180, (2013)
   

acetylsalicylic acid

Sooraj MP et al., Artificial Recognition Sorbents on Multiwalled Carbon Nanotubes for the Separation of Aspirin from its Structural Analogues.
International Journal of Scientific & Engineering Research, 6, (9), 723-733, (2015)
   

acetylsalicylic acid

Wei X et al., Specific recognition and fluorescent determination of aspirin by using core-shell CdTe quantum dot-imprinted polymers.
Microchimica Acta, 182, (7-8), 1527-1534, (2015)
   

acetylsalicylic acid

Meischl F et al., Synthesis and evaluation of a novel molecularly imprinted polymer for the selective isolation of acetylsalicylic acid from aqueous solutions.
Journal of Environmental Chemical Engineering, 4, (Part A), 4083-4090, (2016)
   

acetylsalicylic acid

Zheng XF et al., Preparation and characterization of temperature-memory nanoparticles of MIP-CS-g-PMMA.
RSC Advances, 6, (112), 110722-110732, (2016)
   

acetylsalicylic acid

Deiminiat B et al., A novel electrochemical imprinted sensor for acetylsalicylic acid based on polypyrrole, sol-gel and SiO2@Au core-shell nanoparticles.
Sensors and Actuators B: Chemical, 244, 785-795, (2017)
   

acetylsalicylic acid

Pawley JC et al., Studying the Drug Delivery Kinetics of a Nanoporous Matrix Using a MIP-Based Thermal Sensing Platform.
Polymers, 9, (11), ArticleNo560-(2017)
   

acetylsalicylic acid

Suriyanarayanan S et al., Electrochemically synthesized molecularly imprinted polythiophene nanostructures as recognition elements for an aspirin-chemosensor.
Sensors and Actuators B: Chemical, 253, 428-436, (2017)
   

acetylthiocholine

Jia Z et al., A Probe for Fluorescence Detection of the Acetylcholinesterase Activity Based on Molecularly Imprinted Polymers Coated Carbon Dots.
Chemical and Pharmaceutical Bulletin, 67, (8), 795-800, (2019)
   

4-(acetymethylamino)-1-(3-pyridyl)-butanol

Zhang ZD et al., Synthesis and Solid Phase Extraction Performance Study of NNAL-specific Molecularly Imprinted Polymers Using Dummy Templates.
Chinese Journal of Chemical Physics, 26, (3), 361-368, (2013)
   

ACF

Moein MM et al., Molecularly imprinted sol-gel nanofibers based solid phase microextraction coupled on-line with high performance liquid chromatography for selective determination of acesulfame.
Talanta, 134, 340-347, (2015)
   

ACh

Sacramento AS et al., Novel biomimetic composite material for potentiometric screening of acetylcholine, a neurotransmitter in Alzheimer’s disease.
Materials Science and Engineering: C, 79, 541-549, (2017)
   

ACh

Jia Z et al., A Probe for Fluorescence Detection of the Acetylcholinesterase Activity Based on Molecularly Imprinted Polymers Coated Carbon Dots.
Chemical and Pharmaceutical Bulletin, 67, (8), 795-800, (2019)
   

AChE

Jetzschmann KJ et al., Vectorially Imprinted Hybrid Nanofilm for Acetylcholinesterase Recognition.
Advanced Functional Materials, 25, (32), 5178-5183, (2015)
   

AChE

Qi JF et al., A novel acetylcholinesterase biosensor with dual-recognized strategy based on molecularly imprinted polymer.
Sensors and Actuators B: Chemical, 337, Article129760-(2021)
   

acid dyes

Gao BJ et al., Preparation of Acid Dye Molecule Surface-Imprinted Material for Effective Removal of Acid Dyes from Water and Study on its Molecule Recognition Performance.
Separation Science and Technology, 50, (8), 1108-1119, (2015)
   

acid green 16

Foguel MV et al., Molecularly Imprinted Polymer (MIP): A Promising Recognition System for Development of Optical Sensor for Textile Dyes.
Procedia Technology, 27, 299-300, (2017)
   

acid green 16

Foguel MV et al., Synthesis and evaluation of a molecularly imprinted polymer for selective adsorption and quantification of Acid Green 16 textile dye in water samples.
Talanta, 170, 244-251, (2017)
   

acid green 16

Mortari B et al., A spot test for direct quantification of acid green 16 adsorbed on a molecularly imprinted polymer through diffuse reflectance measurements.
Analytical Methods, 13, (4), 453-461, (2021)
   

acidic and basic lead salamthio complex

Hashemi-Moghaddam H et al., Synthesis of different types of salamthio molecularly imprinted polymers for separation and preconcentration of lead.
Desalination and Water Treatment, 57, (52), 25089-25096, (2016)
   

acidic peptides

Fa SX et al., Water-Soluble Nanoparticle Receptors Supramolecularly Coded for Acidic Peptides.
Chemistry - A European Journal, 24, (1), 150-158, (2018)
   

acidic pharmaceuticals

Zorita S et al., Selective determination of acidic pharmaceuticals in wastewater using molecularly imprinted solid-phase extraction.
Analytica Chimica Acta, 626, (2), 147-154, (2008)
   

acidic pharmaceuticals

Gilart N et al., Determination of pharmaceuticals in wastewaters using solid-phase extraction-liquid chromatography-tandem mass spectrometry.
Journal of Separation Science, 35, (7), 875-882, (2012)
   

acid NSAIDs

Siewing A, The Extraction of Acid NSAIDs from Muscle Tissue using Molecularly Imprinted Polymer SPE.
The Reporter, 29, (1), 18-19, (2011)
   

acid orange II

Zhan J et al., Preparation of a semicovalent, molecularly surface imprinted polymer for the rapid determination of trace acid orange II in food and environmental samples.
Analytical and Bioanalytical Chemistry, 405, (19), 6353-6363, (2013)
   

acid orange II

Wei SL et al., Study and Application of Acid Orange II Sensor Based on Molecularly Imprinted Electropolymerized Membrane.
Journal of Instrumental Analysis, 33, (6), 683-687, (2014)
   

acid orange II

Shang JB et al., Preparation and selective adsorption of organic pollutants by an inorganic molecular imprinted polymer.
Water Science And Technology, 74, (5), 1193-1201, (2016)
   

acid orange II

Song YQ et al., Selective Fenton-like catalytic oxidation of acid orange II on inorganic heterogeneous molecular imprinted catalysts.
Journal of Advanced Oxidation Technologies, 20, (1), ArticleNo20160195-(2017)
   

acid orange II

Song YQ et al., Synthesis of an inorganic-framework molecularly imprinted Fe-doped TiO2 composite and its selective photo-Fenton-like degradation of acid orange II.
Journal of Chemical Technology & Biotechnology, 92, (8), 2038-2049, (2017)
   

acid phosphatase

Li XX et al., Highly selective determination of acid phosphatase in biological samples using a biomimetic recognition-based SERS sensor.
Sensors and Actuators B: Chemical, 276, 421-428, (2018)
   

acid red 14

Gao BJ et al., Designing and preparing of acid dye surface-imprinted material for effective removal of acid dyes from water.
Journal of Environmental Chemical Engineering, 3, (1), 277-285, (2015)
   

acid red 18

Hashemi SH et al., Application of response surface methodology to optimize pipette tip micro-solid phase extraction of dyes from seawater by molecularly imprinted polymer and their determination by HPLC.
Journal of the Iranian Chemical Society, 16, (12), 2613-2627, (2019)
   

acid red 26

Söylemez MA et al., Synthesis of well-defined molecularly imprinted bulk polymers for the removal of azo dyes from water resources.
Current Research in Green and Sustainable Chemistry, 4, Article100196-(2021)
   

acifluorfen

Xu ZF et al., Combination of hydrophobic effect and electrostatic interaction in imprinting for achieving efficient recognition in aqueous media.
Carbohydrate Polymers, 79, (3), 642-647, (2010)
   

Acinetobacter calcoaceticus

Tokonami S et al., Label-Free and Selective Bacteria Detection Using a Film with Transferred Bacterial Configuration.
Analytical Chemistry, 85, (10), 4925-4929, (2013)
   

ACL

Villar-Navarro M et al., Easy, fast and environmental friendly method for the simultaneous extraction of the 16 EPA PAHs using magnetic molecular imprinted polymers (mag-MIPs).
Journal of Chromatography B, 1044-1045, 63-69, (2017)
   

Ac-L-Trp

Yu C et al., Enantiomeric recognition by molecularly imprinted polymers using hydrophobic interactions.
Analytical Letters, 30, (12), 2123-2140, (1997)
   

Ac-L-Trp

Yoshikawa M et al., Chiral recognition of N-a-acetyltryptophans with molecularly imprinted polymeric membranes containing DVNE derivatives.
Sen’i Gakkaishi, 54, (2), 77-84, (1998)
   

aconitine

Yu ZR et al., Preparation and evaluation of aconitine imprinted microspheres and its application to body fluid samples.
Journal of Applied Polymer Science, 128, (5), 3425-3431, (2013)
   

acridine Orange base

Kébir N et al., Chemically modified polysulfones for molecular imprinting. Synthesis and complexation with a fluorescent model template.
Reactive and Functional Polymers, 73, (3), 531-539, (2013)
   

acrylamide

Quan Y et al., Study on Preparation and Performances of Acrylamide Molecularly Imprinted Polymers.
Food and Fermentation Industries, 36, (12), 177-180, (2010)
   

acrylamide

Jiang DL et al., Preparation and application of acrylamide molecularly imprinted composite solid-phase extraction materials.
Analytical Methods, 4, (11), 3760-3766, (2012)
   

acrylamide

Ji J et al., Synthesis of Acrylamide Molecularly Imprinted Polymers Immobilized on Graphite Oxide through Surface-Initiated Atom Transfer Radical Polymerization.
Analytical Letters, 46, (6), 969-981, (2013)
   

acrylamide

Xu LH et al., Preparation of a Hydrophilic Molecularly Imprinted Polymer and Its Application in Solid-Phase Extraction to Determine of Trace Acrylamide in Foods Coupled with High-Performance Liquid Chromatography.
Food Analytical Methods, 6, (3), 838-844, (2013)
   

acrylamide

Sun Q et al., Synthesis of an Organic-Inorganic Hybrid Polymeric Material and its Adsorption Performance Characterization Toward Acrylamide.
Journal of Macromolecular Science, Part B, 53, (4), 683-692, (2014)
   

acrylamide

Sun Q et al., Study on a biomimetic enzyme-linked immunosorbent assay method for rapid determination of trace acrylamide in French fries and cracker samples.
Journal of the Science of Food and Agriculture, 94, (1), 102-108, (2014)
   

acrylamide

Sun Q et al., Synthesis of an Organic-Inorganic Hybrid Polymeric Material and Its Adsorption Performance Characterization Toward Acrylamide.
Journal of Macromolecular Science, Part B, 53, (3), 486-495, (2014)
   

acrylamide

Wang QY et al., An electrochemical sensor based on molecularly imprinted membranes on a P-ATP-AuNP modified electrode for the determination of acrylamide.
Analytical Methods, 6, (16), 6452-6458, (2014)
   

acrylamide

Arabi M et al., Development of dummy molecularly imprinted based on functionalized silica nanoparticles for determination of acrylamide in processed food by matrix solid phase dispersion.
Food Chemistry, 210, 78-84, (2016)
   

acrylamide

Arabi M et al., Novel strategy for synthesis of magnetic dummy molecularly imprinted nanoparticles based on functionalized silica as an efficient sorbent for the determination of acrylamide in potato chips: Optimization by experimental design methodology.
Talanta, 154, 526-532, (2016)
   

acrylamide

Liu X et al., Electrochemical Sensor based on Imprinted Sol-Gel Polymer on Au NPs-MWCNTs-CS Modified Electrode for the Determination of Acrylamide.
Food Analytical Methods, 9, (1), 114-121, (2016)
   

acrylamide

Liu Y et al., A molecularly imprinted polymer placed on the surface of graphene oxide and doped with Mn(II)-doped ZnS quantum dots for selective fluorometric determination of acrylamide.
Microchimica Acta, 185, (1), ArticleNo48-(2017)
   

acrylamide

Ning FJ et al., Dummy-surface molecularly imprinted polymers on magnetic graphene oxide for rapid and selective quantification of acrylamide in heat-processed (including fried) foods.
Food Chemistry, 221, 1797-1804, (2017)
   

acrylamide

Bagheri AR et al., Dummy molecularly imprinted polymers based on a green synthesis strategy for magnetic solid-phase extraction of acrylamide in food samples.
Talanta, 195, 390-400, (2019)
   

acrylamide

Drame A et al., Nanostructured Molecularly Imprinted Polyaniline for Acrylamide Sensing.
Proceedings, 15, (1), ArticleNo37-(2019)
   

acrylamide

Zhang C et al., Preparation of dummy molecularly imprinted polymers based on dextran-modified magnetic nanoparticles Fe3O4 for the selective detection of acrylamide in potato chips.
Food Chemistry, 317, Article126431-(2020)
   

acrylamide

Zhao DY et al., Molecularly imprinted photoelectrochemical sensing based on ZnO/polypyrrole nanocomposites for acrylamide detection.
Biosensors and Bioelectronics, 173, Article112816-(2021)
   

acryloyloxyhexyl cholamide

Idziak I et al., Polymer-catalyzed aminolysis of covalently imprinted cholic acid derivative.
Tetrahedron Letters, 40, (52), 9167-9170, (1999)
   

ACT

Ribeiro A et al., Receptor-based biomimetic NVP/DMA contact lenses for loading/eluting carbonic anhydrase inhibitors.
Journal of Membrane Science, 383, (1-2), 60-69, (2011)
   

ACT

Silva CF et al., Computational study on acetamiprid-molecular imprinted polymer.
Journal of Molecular Modeling, 25, (4), Article104-(2019)
   

ACT

Mpayipheli N et al., Vortex-Assisted Dispersive Molecularly Imprinted Polymer-Based Solid Phase Extraction of Acetaminophen from Water Samples Prior to HPLC-DAD Determination.
Separations, 8, (10), ArticleNo194-(2021)
   

Act D

Li CG et al., Purification and identification of an actinomycin D analogue from actinomycetes associated with Ganoderma applanatum via magnetic molecularly imprinted polymers and tandem mass spectrometry.
Food and Chemical Toxicology, 119, 150-160, (2018)
   

actinomycin D

Li CG et al., Purification and identification of an actinomycin D analogue from actinomycetes associated with Ganoderma applanatum via magnetic molecularly imprinted polymers and tandem mass spectrometry.
Food and Chemical Toxicology, 119, 150-160, (2018)
   

active brilliant red X-3B

Deng H et al., Enhanced adsorption of active brilliant red X-3B dye on chitosan molecularly imprinted polymer functionalized with Ti(IV) as Lewis acid.
Carbohydrate Polymers, 157, 1190-1197, (2017)
   

Ac-Trp

Yoshikawa M et al., Chiral recognition sites from carbonyldioxyglyceryl moiety by an alternative molecular imprinting.
Sensors and Actuators B: Chemical, 104, (2), 282-288, (2005)
   

ACV

Han YH et al., Rapid determination of acyclovir in edible creatural tissues by molecularly imprinted matrix solid-phase dispersion coupled with high performance liquid chromatography.
Analytical Methods, 5, (13), 3285-3290, (2013)
   

ACV

Wu SQ et al., Binding characteristics of homogeneous molecularly imprinted polymers for acyclovir using an (acceptor-donor-donor)-(donor-acceptor-acceptor) hydrogen-bond strategy, and analytical applications for serum samples.
Journal of Chromatography A, 1285, 124-131, (2013)
   

ACV

Liu LT et al., Visible-Light-Responsive Surface Molecularly Imprinted Polymer for Acyclovir through Chicken Skin Tissue.
ACS Applied Bio Materials, 1, (3), 845-852, (2018)
   

Acy

Song XL et al., Determination of 16 polycyclic aromatic hydrocarbons in seawater using molecularly imprinted solid-phase extraction coupled with gas chromatography-mass spectrometry.
Talanta, 99, 75-82, (2012)
   

acyclovir

Proceeding, Qiao FX et al, Validation of the Pseudo Imprinted Microspheres for Solid-Phase Extraction of Acyclovir from Swine Tissue, 
In: Advanced Materials Research, Chen R, Sung WP (Eds.), 1591-1594, (2011)
   

acyclovir

Wu SQ et al., Binding characteristics of homogeneous molecularly imprinted polymers for acyclovir using an (acceptor-donor-donor)-(donor-acceptor-acceptor) hydrogen-bond strategy, and analytical applications for serum samples.
Journal of Chromatography A, 1285, 124-131, (2013)
   

acyclovir

Yan HY et al., Hybrid molecularly imprinted polymers synthesized with 3-aminopropyltriethoxysilane-methacrylic acid monomer for miniaturized solid-phase extraction: A new and economical sample preparation strategy for determination of acyclovir in urine.
Journal of Chromatography A, 1346, 16-24, (2014)
   

acyclovir

Liu LT et al., Visible-Light-Responsive Surface Molecularly Imprinted Polymer for Acyclovir through Chicken Skin Tissue.
ACS Applied Bio Materials, 1, (3), 845-852, (2018)
   

acyclovir

Ordoñez HC et al., Voltammetric analysis of acyclovir at glassy carbon/oppy/templated electrode.
Journal of Physics: Conference Series, 1119, Article012008-(2018)
   

acylated naproxxen

Ornelas M et al., Acylated-naproxen as the surface-active template in the preparation of micro- and nanospherical imprinted xerogels by emulsion techniques.
Journal of Chromatography A, 1437, 107-115, (2016)
   

acyl-homoserine lactones

Susmel S et al., Selectivity and Efficiency of Conductive Molecularly Imprinted Polymer (c-MIP) Based on 5-Phenyl-Dipyrromethane and 5-Phenol-Dipyrromethane for Quorum Sensing Precursors Detection.
Chemosensors, 5, (1), ArticleNo5-(2017)
   

ACZ

Khodadadian M et al., Computer-assisted design and synthesis of molecularly imprinted polymers for selective extraction of acetazolamide from human plasma prior to its voltammetric determination.
Talanta, 81, (4-5), 1446-1453, (2010)
   

AD

Muhammad T et al., Preparation of molecular imprinted polymer fluorescence sensing membrane and its application to the determination of amiodarone.
Chinese Journal of Analytical Chemistry, 35, (7), 1059-1062, (2007)
   

AD

Muhammad T et al., Rational design and synthesis of water-compatible molecularly imprinted polymers for selective solid phase extraction of amiodarone.
Analytica Chimica Acta, 709, (1), 98-104, (2012)
   

AD

Chen FF et al., Magnetic molecularly imprinted polymer for the selective extraction of sildenafil, vardenafil and their analogs from herbal medicines.
Talanta, 115, 482-489, (2013)
   

AD

Chen SX et al., MXene/carbon nanohorns decorated with conductive molecularly imprinted poly(hydroxymethyl-3,4-ethylenedioxythiophene) for voltammetric detection of adrenaline.
Microchimica Acta, 188, (12), Article420-(2021)
   

adamantadine

Yun YG et al., Molecularly imprinted electrodeposition o-aminothiophenol sensor for selective and sensitive determination of amantadine in animal-derived foods.
Sensors and Actuators B: Chemical, 238, 32-39, (2017)
   

adamantane

Zhang T et al., Preparation of a molecularly imprinted polymer based chemiluminescence sensor for the determination of amantadine and rimantadine in meat.
Analytical Methods, 10, (41), 5025-5031, (2018)
   

adamantane carboxylic acid

Canlas CP et al., Shape-selective sieving layers on an oxide catalyst surface.
Nature Chemistry, 4, (12), 1030-1036, (2012)
   

ADD

Khomutov S et al., Nanodimer cyclodextrin ligands with high affinity to steroids.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 70, (3), 353-357, (2011)
   

adefovir

Pourfarzib M et al., Water-compatible molecularly imprinted polymer as a sorbent for the selective extraction and purification of adefovir from human serum and urine.
Journal of Separation Science, 38, (10), 1755-1762, (2015)
   

adefovir dipivoxil

Dorraji PS et al., Voltammetric determination of adefovir dipivoxil by using a nanocomposite prepared from molecularly imprinted poly(o-phenylenediamine), multi-walled carbon nanotubes and carbon nitride.
Microchimica Acta, 186, (7), Article427-(2019)
   

adenine

Mathew J et al., Molecular imprinting approach for the recognition of adenine in aqueous-medium and hydrolysis of adenosine 5’-triphosphate.
Bioconjugate Chemistry, 6, (5), 524-528, (1995)
   

adenine

Li SA et al., Molecular imprinted membrane with high flux by surface photo-grafting copolymerization.
Chinese Journal of Chemical Engineering, 13, (2), 184-190, (2005)
   

adenine

Yoshikawa M et al., Green polymers from Geobacillus thermodenitrificans DSM465 - Candidates for molecularly imprinted materials.
Macromolecular Bioscience, 6, (3), 210-215, (2006)
   

adenine

Sreenivasan K, Synthesis and evaluation of molecularly imprinted polymers for nucleic acid bases using aniline as a monomer.
Reactive and Functional Polymers, 67, (10), 859-864, (2007)
   

adenine

Li SJ et al., Modulated molecular recognition by a temperature-sensitive molecularly-imprinted polymer.
Journal of Polymer Science Part A: Polymer Chemistry, 47, (9), 2352-2360, (2009)
   

adenine

Pietrzyk A et al., Molecularly imprinted polymer (MIP) based piezoelectric microgravimetry chemosensor for selective determination of adenine.
Biosensors and Bioelectronics, 25, (11), 2522-2529, (2010)
   

adenine

Wybranska K et al., Adenine Molecularly Imprinted Polymer-Coated Submicrometer Silica Gel Particles.
Chemistry of Materials, 22, (18), 5392-5399, (2010)
   

Adenine

Plewa A et al., Molecularly Imprinted Hybrid Adsorbents for Adenine and Adenosine-5’-triphosphate.
Journal of Medicinal Chemistry, 55, (20), 8712-8720, (2012)
   

adenine

Mikulska A et al., Polymeric/silicagel hybrid molecularly photoimprinted adsorbents for adenosine and its derivatives.
European Polymer Journal, 59, 230-238, (2014)
   

adenine

Wang X et al., An electrochemical adenine sensor employing enhanced three-dimensional conductivity and molecularly imprinted sites of Au NPs bridged poly(3-thiophene acetic acid).
Sensors and Actuators B: Chemical, 255, (Part 3), 2952-2958, (2018)
   

adenine

Wang MW et al., Green protocol for the preparation of hydrophilic molecularly imprinted resin in water for the efficient selective extraction and determination of plant hormones from bean sprouts.
Analytica Chimica Acta, 1064, 47-55, (2019)
   

adeno-associated viruses (AAV)-neutralizing antibodies

Piletska EV et al., Combinatorial screening of polymer nanoparticles for their ability to recognize epitopes of AAV-neutralizing antibodies.
Journal of Molecular Recognition, 33, (4), Article_e2824-(2020)
   

adenosine

Piletsky SA et al., Nucleoside-selective polymers based on methacrylate copolymers.
Ukrainskii Khimicheskii Zhurnal, 59, (12), 1316-1320, (1993)
   

adenosine

Yoshikawa M et al., Evaluation of the Recognition Ability of Molecularly Imprinted Proteins by Surface Plasmon Resonance (SPR) Spectroscopy.
Membrane, 32, (1), 40-44, (2007)
   

adenosine

Yoshikawa M et al., Surface plasmon resonance studies on molecularly imprinted films.
Journal of Applied Polymer Science, 110, (5), 2826-2832, (2008)
   

adenosine

Wybranska K et al., Adenine Molecularly Imprinted Polymer-Coated Submicrometer Silica Gel Particles.
Chemistry of Materials, 22, (18), 5392-5399, (2010)
   

adenosine

Zhang ZJ et al., Molecularly Imprinted Polymers with DNA Aptamer Fragments as Macromonomers.
ACS Applied Materials & Interfaces, 8, (10), 6371-6378, (2016)
   

adenosine

Gong X et al., Synthesis of adenosine-imprinted microspheres for the recognition of ADP-ribosylated proteins.
Biosensors and Bioelectronics, 87, 858-864, (2017)
   

adenosine

Gliga LE et al., Electrochemical platform for the detection of adenosine using a sandwich-structured molecularly imprinted polymer-based sensor.
Electrochimica Acta, 354, Article136656-(2020)
   

adenosine

Jalilzadeh M et al., Adenosine-imprinted magnetic core-shell polyvinylbutyral microbeads for quantification of adenosine in plasma.
Journal of Chromatography B, 1147, Article122149-(2020)
   

adenosine

He HB et al., Boronate affinity directing adenosine imprinted nanomagnetic polyhedral oligomeric silsesquioxanes for selective extraction of nucleosides in urine sample.
Microchemical Journal, 169, Article106575-(2021)
   

adenosine 3’,5’-cyclic monophosphate

Kochkodan VM et al., Composite template membranes as synthetic receptor systems. 2. Structural-morphological characteristics.
Ukrainskii Biokhimicheskii Zhurnal, 77, (4), 64-69, (2005)
   

adenosine 3’,5’-cyclic monophosphate

Sadowska M et al., Molecularly Imprinted Thin Polymeric Film as a Fluorescent Sensor for Nucleotides.
Molecular Crystals And Liquid Crystals, 486, (1), 203-212, (2008)
   

adenosine 3’,5’-cyclic monophosphate

Wandelt B et al., Polymeric Sensory Systems Based on Molecular Imprinting for Identification and Separation of Molecules and Bigger Biological Objects.
Molecular Crystals And Liquid Crystals, 486, (1), 257-270, (2008)
   

Adenosine diphosphate

Sreenivasan K, Synthesis and evaluation of multiply templated molecularly imprinted polyaniline.
Journal of Materials Science, 42, (17), 7575-7578, (2007)
   

Adenosine mono phosphate

Sreenivasan K, Synthesis and evaluation of multiply templated molecularly imprinted polyaniline.
Journal of Materials Science, 42, (17), 7575-7578, (2007)
   

adenosine-5’-monophosphate

Breton F et al., Selective adenosine-5’-monophosphate uptake by water-compatible molecularly imprinted polymer.
Analytica Chimica Acta, 616, (2), 222-229, (2008)
   

adenosine 5’-monophosphate

Breton F et al., Molecular imprinting of AMP by an ionic-noncovalent dual approach.
Journal of Separation Science, 32, (19), 3285-3291, (2009)
   

adenosine monophosphate

Proceeding, Aouled NO et al, Love wave sensor based on thin film molecularly imprinted polymer : MIP layer morphology and nucleosides analogs detection, 
1-4, (2013)
   

adenosine monophosphate

Proceeding, Hallil H et al, SH-SAW sensing system based on thin film molecularly imprinted polymer: Study of Volatile organic compounds adsorption, 
Art No 6676129, (2013)
   

adenosine 5’-monophosphate

Proceeding, Lebal N et al, Association of a Love wave sensor to thin film molecularly imprinted polymers for nucleosides analogs detection, 
550-553, (2013)
   

adenosine monophosphate

Lebal N et al., Nucleosides analogues recognition by molecularly imprinted polymer-coated Love wave sensor.
Micro and Nano Letters, 8, (10), 563-566, (2013)
   

adenosine-5’-monophosphate

Proceeding, Lebal N et al, Real-time study of adenosine-5’ monophosphate adsorption with a Love wave sensor based on molecularly imprinted polymer, 
1-3, (2014)
   

adenosine monophosphate

Chen Y et al., Dual-template docking oriented molecular imprinting: a facile strategy for highly efficient imprinting within mesoporous materials.
Chemical Communications, 51, (54), 10929-10932, (2015)
   

adenosine-5’-monophosphate

Dejous C et al., Love Acoustic Wave-Based Devices and Molecularly-Imprinted Polymers as Versatile Sensors for Electronic Nose or Tongue for Cancer Monitoring.
Sensors, 16, (6), ArticleNo915-(2016)
   

adenosine monophosphate

Mourão CA et al., Dual-Oriented Solid-Phase Molecular Imprinting: Toward Selective Artificial Receptors for Recognition of Nucleotides in Water.
Macromolecules, 50, (19), 7484-7490, (2017)
   

adenosine 5’-monophosphate

Ayari MG et al., Synthesis of imprinted hydrogel microbeads by inverse Pickering emulsion to controlled release of adenosine 5’-monophosphate.
Materials Science and Engineering: C, 101, 254-263, (2019)
   

adenosine 5’-triphosphate

Mathew J et al., Molecular imprinting approach for the recognition of adenine in aqueous-medium and hydrolysis of adenosine 5’-triphosphate.
Bioconjugate Chemistry, 6, (5), 524-528, (1995)
   

adenosine triphosphate

Hong SJ et al., Preparation of molecular imprinted polypyrrole and poly(o-phenylenediamine) and their application as EQCM sensors for ATP detection.
Abstracts of Papers of the American Chemical Society, 223, (ANYL), 113-113, (2002)
   

adenosine triphosphate

Matsui J et al., Molecular Imprinting within a Single Peptide Molecule for Synthesizing a Water-Soluble ATP Receptor.
Pept. Sci., 396-397, (2006)
   

adenosine triphosphate

Matsui J et al., Development of a tailor-made functional peptide by template-directed intramolecular cross-linking.
Polymer Preprints, Japan, 55, (2), 5328-5329, (2006)
   

Adenosine triphosphate

Sreenivasan K, Synthesis and evaluation of multiply templated molecularly imprinted polyaniline.
Journal of Materials Science, 42, (17), 7575-7578, (2007)
   

adenosine triphosphate

Matsui J et al., An approach to peptide-based ATP receptors by a combination of random selection, rational design, and molecular imprinting.
Biosensors and Bioelectronics, 25, (3), 563-567, (2009)
   

Adenosine-5’-triphosphate

Plewa A et al., Molecularly Imprinted Hybrid Adsorbents for Adenine and Adenosine-5’-triphosphate.
Journal of Medicinal Chemistry, 55, (20), 8712-8720, (2012)
   

adenosine triphosphate

Dmitrienko EV et al., A simple approach to prepare molecularly imprinted polymers from nylon-6.
Journal of Molecular Recognition, 26, (8), 368-375, (2013)
   

adenosine-5’-triphosphate

Huynh TP et al., Electrochemically synthesized molecularly imprinted polymer of thiophene derivatives for flow-injection analysis determination of adenosine-5’-triphosphate (ATP).
Biosensors and Bioelectronics, 41, 634-641, (2013)
   

adenosine triphosphate

Yang M et al., Determination of ATP using a double-receptor sandwich method based on molecularly imprinted membrane and fluorescence-labeled uranyl-salophen complex.
Analytical and Bioanalytical Chemistry, 405, (23), 7545-7551, (2013)
   

adenosine-5’-triphosphate

Sharma PS et al., Fullerene derived molecularly imprinted polymer for chemosensing of adenosine-5’-triphosphate (ATP).
Analytica Chimica Acta, 844, 61-69, (2014)
   

adenosine triphosphate

Cela-Pérez MC et al., Selective removal of ATP degradation products from food matrices II: Rapid screening of hypoxanthine and inosine by molecularly imprinted matrix solid-phase dispersion for evaluation of fish freshness.
Talanta, 135, 58-66, (2015)
   

adenosine triphosphate

Takata A et al., ATP-binding peptide-hydrogel composite synthesized by molecular imprinting on beads.
Molecular Imprinting, 3, (1), 65-70, (2015)
   

adenosine 5’-triphosphate

Jadda R et al., Novel adsorptive materials by adenosine 5’-triphosphate imprinted-polymer over the surface of polystyrene nanospheres for selective separation of adenosine 5’-triphosphate biomarker from urine.
Journal of Separation Science, 42, (24), 3662-3678, (2019)
   

adenovirus

Altintas Z et al., Comparative investigations for adenovirus recognition and quantification: Plastic or natural antibodies?
Biosensors and Bioelectronics, 74, 996-1004, (2015)
   

adenovirus

Gast M et al., Enhanced Selectivity by Passivation: Molecular Imprints for Viruses with Exceptional Binding Properties.
Analytical Chemistry, 90, (9), 5576-5585, (2018)
   

adipic acid

Ying XG et al., Molecular imprinting technique in putrescine visualized detection.
Sensors and Actuators B: Chemical, 258, 870-880, (2018)
   

adipose derived mesenchymal stem cells

Mahmoudi M et al., Cell-Imprinted Substrates Direct the Fate of Stem Cells.
ACS Nano, 7, (10), 8379-8384, (2013)
   

ADMA

Malyshev V et al., Determination of Asymmetric Dimethylarginine by Using Organic Semiconductor-Based Molecularly Imprinted Polymer Film.
ECS Journal of Solid State Science and Technology, 7, (7), Q3189-Q3195, (2018)
   

ADP

Sreenivasan K, Synthesis and evaluation of multiply templated molecularly imprinted polyaniline.
Journal of Materials Science, 42, (17), 7575-7578, (2007)
   

ADP-ribosylated proteins

Gong X et al., Synthesis of adenosine-imprinted microspheres for the recognition of ADP-ribosylated proteins.
Biosensors and Bioelectronics, 87, 858-864, (2017)
   

Adr

Huynh TP et al., Molecularly imprinted polymer of bis(2,2’-bithienyl)methanes for selective determination of adrenaline.
Bioelectrochemistry, 93, 37-45, (2013)
   

adrenalin

Huang BY et al., Preparation and evaluation of a monolithic molecularly imprinted polymer for the chiral separation of neurotransmitters and their analogues by capillary electrochromatography.
Journal of Chromatography A, 1218, (6), 849-855, (2011)
   

adrenalin

Sartori LR et al., Flow-based method for epinephrine determination using a solid reactor based on molecularly imprinted poly(FePP-MAA-EGDMA).
Materials Science and Engineering: C, 31, (2), 114-119, (2011)
   

adrenalin

Qiu HM et al., A chemiluminescence sensor for determination of epinephrine using graphene oxide - magnetite-molecularly imprinted polymers.
Carbon, 50, (11), 4052-4060, (2012)
   

adrenalin

Prasad BB et al., Multiwalled carbon nanotubes bearing ’terminal monomeric unit’ for the fabrication of epinephrine imprinted polymer-based electrochemical sensor.
Biosensors and Bioelectronics, 45, 114-122, (2013)
   

adrenalin

Gour DG et al., Molecularly imprinted polymer for detection of endocrine disrupting chemical epinephrine in drinking water and biological buffers.
Indian Journal of Chemistry, 54A, (8), 1051-1056, (2015)
   

adrenalin

Tadi KK et al., Electrochemical detection of epinephrine using a biomimic made up of hemin modified molecularly imprinted microspheres.
RSC Advances, 5, (120), 99115-99124, (2015)
   

adrenalin

Li HH et al., A novel electrochemical sensor for epinephrine based on three dimensional molecularly imprinted polymer arrays.
Sensors and Actuators B: Chemical, 222, 1127-1133, (2016)
   

adrenalin

Si B et al., Molecularly imprinted polymers for the selective detection of multi-analyte neurotransmitters.
Microelectronic Engineering, 187-188, 58-65, (2018)
   

adrenaline

Hsu CW et al., Electrochemical epinephrine sensor using artificial receptor synthesized by sol-gel process.
Sensors and Actuators B: Chemical, 134, (2), 680-686, (2008)
   

adrenaline

Lasáková M et al., Molecularly imprinted polymer for solid-phase extraction of ephedrine and analogs from human plasma.
Journal of Separation Science, 32, (7), 1036-1042, (2009)
   

adrenaline

Zhou H et al., A multiporous electrochemical sensor for epinephrine recognition and detection based on molecularly imprinted polypyrrole.
RSC Advances, 2, (20), 7803-7808, (2012)
   

adrenaline

Huynh TP et al., Molecularly imprinted polymer of bis(2,2’-bithienyl)methanes for selective determination of adrenaline.
Bioelectrochemistry, 93, 37-45, (2013)
   

adrenaline

Lin XY et al., A novel electrochemical sensor for the analysis of β-agonists: The poly(acid chrome blue K)/graphene oxide-nafion/glassy carbon electrode.
Journal of Hazardous Materials, 260, 508-517, (2013)
   

adrenaline

Wu Y et al., Sensing epinephrine with an ITO electrode modified with an imprinted chitosan film containing multi-walled carbon nanotubes and a polymerized ionic liquid.
Microchimica Acta, 180, (13-14), 1325-1332, (2013)
   

adrenaline

Prasad BB et al., Molecularly imprinted micro solid-phase extraction technique coupled with complementary molecularly imprinted polymer-sensor for ultra trace analysis of epinephrine in real samples.
Colloids and Surfaces B: Biointerfaces, 113, 69-76, (2014)
   

adrenaline

Ma JB et al., Fast determination of catecholamines in human plasma using carboxyl-functionalized magnetic-carbon nanotube molecularly imprinted polymer followed by liquid chromatography-tandem quadrupole mass spectrometry.
Journal of Chromatography A, 1429, 86-96, (2016)
   

adrenaline

Zaidi SA, Utilization of an environmentally-friendly monomer for an efficient and sustainable adrenaline imprinted electrochemical sensor using graphene.
Electrochimica Acta, 274, 370-377, (2018)
   

adrenaline

Dhanjai et al., A flexible-imprinted capacitive sensor for rapid detection of adrenaline.
Talanta, 204, 602-606, (2019)
   

adrenaline

Chen SX et al., MXene/carbon nanohorns decorated with conductive molecularly imprinted poly(hydroxymethyl-3,4-ethylenedioxythiophene) for voltammetric detection of adrenaline.
Microchimica Acta, 188, (12), Article420-(2021)
   

β-adrenergic receptor agonists

Cheng J et al., Simultaneous Identification and Quantification of 20 β-Receptor Agonists in Feed Using Gas Chromatography-Tandem Mass Spectrometry.
PLoS ONE, 8, (10), e76400-(2013)
   

adrostane steroids

Sanglar C et al., Study of Prepolymerization Complex Formation in the Synthesis of Steroid-Based Molecularly Imprinted Polymers.
Analytical Chemistry, 84, (10), 4481-4488, (2012)
   

ADSCs

Mahmoudi M et al., Cell-Imprinted Substrates Direct the Fate of Stem Cells.
ACS Nano, 7, (10), 8379-8384, (2013)
   

ADT

Sanglar C et al., Study of Prepolymerization Complex Formation in the Synthesis of Steroid-Based Molecularly Imprinted Polymers.
Analytical Chemistry, 84, (10), 4481-4488, (2012)
   

AdV

Gast M et al., Understanding the viral load during the synthesis and after rebinding of virus imprinted particles via real-time quantitative PCR.
Analyst, 143, (11), 2616-2622, (2018)
   

ADV

Dorraji PS et al., Voltammetric determination of adefovir dipivoxil by using a nanocomposite prepared from molecularly imprinted poly(o-phenylenediamine), multi-walled carbon nanotubes and carbon nitride.
Microchimica Acta, 186, (7), Article427-(2019)
   

AdV5

Gast M et al., Use of Super-Resolution Optical Microscopy To Reveal Direct Virus Binding at Hybrid Core-Shell Matrixes.
Analytical Chemistry, 92, (4), 3050-3057, (2020)
   

advanced glycation end-products

Yamazaki T et al., Molecular recognition of AGEs using molecularly imprinted polymer.
Nippon Kagakkai Koen Yokoshu, 86, (2), 944-(2006)
   

AE

Hao QQ et al., Probe and analogue: Double roles of thionine for aloe-emodin selective and sensitive ratiometric detection.
Sensors and Actuators B: Chemical, 292, 247-253, (2019)
   

AE

Wang M et al., Imprinted polymer/Fe3O4 micro-particles decorated multi-layer graphite paper: Electrochemical and colorimetric dual-modal sensing interface for aloe-emodin assay.
Sensors and Actuators B: Chemical, 323, Article128672-(2020)
   

aesculetin

Jia M et al., Improvement of imprinting effect of ionic liquid molecularly imprinted polymers by use of a molecular crowding agent.
Analytical and Bioanalytical Chemistry, 410, (2), 595-604, (2018)
   

aesculin

Zhao L et al., Improving affinity of β-cyclodextrin-based molecularly imprinted polymer using room temperature ionic liquid.
European Polymer Journal, 116, 275-282, (2019)
   

aestriol

Tang JW et al., Dummy Molecularly Imprinted Matrix Solid-Phase Dispersion for Selective Extraction of Seven Estrogens in Aquatic Products.
Food Analytical Methods, 12, (10), 2241-2249, (2019)
   

AFB1

Wang ZH et al., Electrochemical sensor for determination of aflatoxin B1 based on multiwalled carbon nanotubes-supported Au/Pt bimetallic nanoparticles.
Journal of Solid State Electrochemistry, 18, (9), 2487-2496, (2014)
   

AFB1

Jiang MJ et al., Aflatoxin B1 Detection Using a Highly-Sensitive Molecularly-Imprinted Electrochemical Sensor Based on an Electropolymerized Metal Organic Framework.
Toxins, 7, (9), 3540-3553, (2015)
   

AFB1

Semong O et al., Development of an aflatoxin B1 specific molecularly imprinted solid phase extraction sorbent for the selective pre-concentration of toxic aflatoxin B1 from child weaning food, Tsabana.
Molecular Imprinting, 5, (1), 1-15, (2017)
   

AFB1

Sergeyeva T et al., Fluorescent sensor systems based on nanostructured polymeric membranes for selective recognition of Aflatoxin B1.
Talanta, 175, 101-107, (2017)
   

AFB1

Liang GH et al., Synthesis of carbon quantum dots-doped dummy molecularly imprinted polymer monolithic column for selective enrichment and analysis of aflatoxin B1 in peanut.
Journal of Pharmaceutical and Biomedical Analysis, 149, 258-264, (2018)
   

AFB1

Chmangui A et al., Aflatoxins screening in non-dairy beverages by Mn-doped ZnS quantum dots - Molecularly imprinted polymer fluorescent probe.
Talanta, 199, 65-71, (2019)
   

AFB2

Chmangui A et al., Aflatoxins screening in non-dairy beverages by Mn-doped ZnS quantum dots - Molecularly imprinted polymer fluorescent probe.
Talanta, 199, 65-71, (2019)
   

AFB1

Guo PQ et al., Rapid detection of aflatoxin B1 by dummy template molecularly imprinted polymer capped CdTe quantum dots.
Analytical and Bioanalytical Chemistry, 411, (12), 2607-2617, (2019)
   

AFB1

Liang YT et al., An amino-functionalized zirconium-based metal-organic framework of type UiO-66-NH2 covered with a molecularly imprinted polymer as a sorbent for the extraction of aflatoxins AFB1, AFB2, AFG1 and AFG2 from grain.
Microchimica Acta, 187, (1), Article32-(2019)
   

AFB2

Liang YT et al., An amino-functionalized zirconium-based metal-organic framework of type UiO-66-NH2 covered with a molecularly imprinted polymer as a sorbent for the extraction of aflatoxins AFB1, AFB2, AFG1 and AFG2 from grain.
Microchimica Acta, 187, (1), Article32-(2019)
   

AFB1

Akgönüllü S et al., SPR nanosensor based on molecularly imprinted polymer film with gold nanoparticles for sensitive detection of aflatoxin B1.
Talanta, 219, Article121219-(2020)
   

AFB2

El Alami El Hassani N et al., Recent development of an electrochemical imprinted sensor for the detection of trace-level of unmetabolized aflatoxin B2 in dairy milk.
Journal of Electroanalytical Chemistry, 865, Article114123-(2020)
   

AFB1

Chmangui A et al., Assessment of trace levels of aflatoxins AFB1 and AFB2 in non-dairy beverages by molecularly imprinted polymer based micro solid-phase extraction and liquid chromatography-tandem mass spectrometry.
Analytical Methods, 13, (30), 3433-3443, (2021)
   

AFB2

Chmangui A et al., Assessment of trace levels of aflatoxins AFB1 and AFB2 in non-dairy beverages by molecularly imprinted polymer based micro solid-phase extraction and liquid chromatography-tandem mass spectrometry.
Analytical Methods, 13, (30), 3433-3443, (2021)
   

AFB1

Jin YX et al., Photocatalytic Fuel Cell-Assisted Molecularly Imprinted Self-Powered Sensor: A Flexible and Sensitive Tool for Detecting Aflatoxin B1.
Analytical Chemistry, 93, (39), 13204-13211, (2021)
   

AFB1

Singh AK et al., A simple detection platform based on molecularly imprinted polymer for AFB1 and FuB1 mycotoxins.
Microchemical Journal, 171, Article106730-(2021)
   

AFB1

Wang CY et al., Molecularly imprinted photoelectrochemical sensor for aflatoxin B1 detection based on organic/inorganic hybrid nanorod arrays.
Sensors and Actuators B: Chemical, 339, Article129900-(2021)
   

AFG1

Chmangui A et al., Aflatoxins screening in non-dairy beverages by Mn-doped ZnS quantum dots - Molecularly imprinted polymer fluorescent probe.
Talanta, 199, 65-71, (2019)
   

AFG2

Chmangui A et al., Aflatoxins screening in non-dairy beverages by Mn-doped ZnS quantum dots - Molecularly imprinted polymer fluorescent probe.
Talanta, 199, 65-71, (2019)
   

AFG1

Liang YT et al., An amino-functionalized zirconium-based metal-organic framework of type UiO-66-NH2 covered with a molecularly imprinted polymer as a sorbent for the extraction of aflatoxins AFB1, AFB2, AFG1 and AFG2 from grain.
Microchimica Acta, 187, (1), Article32-(2019)
   

AFG2

Liang YT et al., An amino-functionalized zirconium-based metal-organic framework of type UiO-66-NH2 covered with a molecularly imprinted polymer as a sorbent for the extraction of aflatoxins AFB1, AFB2, AFG1 and AFG2 from grain.
Microchimica Acta, 187, (1), Article32-(2019)
   

aflatoxin

Sergeyeva TA et al., Sensor system based on molecularly-imprinted polymer membranes for the selective recognition of aflatoxin B1.
Ukrainskii Biokhimicheskii Zhurnal, 80, (3), 84-93, (2008)
   

aflatoxin

Szumski M et al., Monolithic molecularly imprinted polymeric capillary columns for isolation of aflatoxins.
Journal of Chromatography A, 1364, 163-170, (2014)
   

aflatoxin

Book chapter, Attia MSet al., Nano-optical Biosensors for Assessment of Food Contaminants, 
In: Functional Biopolymers, Thakur VK, Thakur MK (Eds.) Springer International Publishing: Cham, 1-23, (2018)
   

aflatoxin

Wu CJ et al., Solid-phase extraction of aflatoxins using a nanosorbent consisting of a magnetized nanoporous carbon core coated with a molecularly imprinted polymer.
Microchimica Acta, 185, (11), ArticleNo515-(2018)
   

aflatoxin

Yerramreddy TR et al., An efficient and metal-free synthesis of 5,7-dimethylcyclopentenon[2,3-c]coumarin.
Journal of Chemical Research, Article17475198211046781-(2021)
   

aflatoxin B1

Sergeyeva TA et al., Aflatoxin-selective molecularly-imprinted polymer membranes based on acrylate-polyurethane semi-interpenetrating polymer networks.
Ukrainskii Biokhimicheskii Zhurnal, 79, (5), 109-115, (2007)
   

aflatoxin B1

Sergeyeva TA et al., Sensor system based on molecularly-imprinted polymer membranes for the selective recognition of aflatoxin B1.
Ukrainskii Biokhimicheskii Zhurnal, 80, (3), 84-93, (2008)
   

aflatoxin B1

Wyszomirski M et al., Molecular modelling of a template substitute and monomers used in molecular imprinting for aflatoxin B1 micro-HPLC analysis.
Molecular Simulation, 38, (11), 892-895, (2012)
   

aflatoxin B1

Szumski M et al., Monolithic molecularly imprinted polymeric capillary columns for isolation of aflatoxins.
Journal of Chromatography A, 1364, 163-170, (2014)
   

aflatoxin B2

Szumski M et al., Monolithic molecularly imprinted polymeric capillary columns for isolation of aflatoxins.
Journal of Chromatography A, 1364, 163-170, (2014)
   

aflatoxin B1

Wang ZH et al., Electrochemical sensor for determination of aflatoxin B1 based on multiwalled carbon nanotubes-supported Au/Pt bimetallic nanoparticles.
Journal of Solid State Electrochemistry, 18, (9), 2487-2496, (2014)
   

aflatoxin B1

Jiang MJ et al., Aflatoxin B1 Detection Using a Highly-Sensitive Molecularly-Imprinted Electrochemical Sensor Based on an Electropolymerized Metal Organic Framework.
Toxins, 7, (9), 3540-3553, (2015)
   

aflatoxin B1

Wei SL et al., Molecularly imprinted solid phase extraction coupled to high performance liquid chromatography for determination of aflatoxin M1 and B1 in foods and feeds.
RSC Advances, 5, (27), 20951-20960, (2015)
   

aflatoxin B1

Díaz-Bao M et al., A facile method for the fabrication of magnetic molecularly imprinted stir-bars: A practical example with aflatoxins in baby foods.
Journal of Chromatography A, 1471, 51-59, (2016)
   

aflatoxin B2

Díaz-Bao M et al., A facile method for the fabrication of magnetic molecularly imprinted stir-bars: A practical example with aflatoxins in baby foods.
Journal of Chromatography A, 1471, 51-59, (2016)
   

aflatoxin B1

Gutierrez RAV et al., Bioimprinting as a tool for the detection of aflatoxin B1 using a capacitive biosensor.
Biotechnology Reports, 11, 12-17, (2016)
   

aflatoxin B1

Tan L et al., Ultra-high performance liquid chromatography combined with mass spectrometry for determination of aflatoxins using dummy molecularly imprinted polymers deposited on silica-coated magnetic nanoparticles.
Microchimica Acta, 183, (4), 1469-1477, (2016)
   

aflatoxin B2

Tan L et al., Ultra-high performance liquid chromatography combined with mass spectrometry for determination of aflatoxins using dummy molecularly imprinted polymers deposited on silica-coated magnetic nanoparticles.
Microchimica Acta, 183, (4), 1469-1477, (2016)
   

aflatoxin B1

Bayram E et al., Multiclonal plastic antibodies for selective aflatoxin extraction from food samples.
Food Chemistry, 221, 829-837, (2017)
   

aflatoxin B2

Bayram E et al., Multiclonal plastic antibodies for selective aflatoxin extraction from food samples.
Food Chemistry, 221, 829-837, (2017)
   

aflatoxin B1

Semong O et al., Development of an aflatoxin B1 specific molecularly imprinted solid phase extraction sorbent for the selective pre-concentration of toxic aflatoxin B1 from child weaning food, Tsabana.
Molecular Imprinting, 5, (1), 1-15, (2017)
   

aflatoxin B1

Sergeyeva T et al., Fluorescent sensor systems based on nanostructured polymeric membranes for selective recognition of Aflatoxin B1.
Talanta, 175, 101-107, (2017)
   

aflatoxin B1

Liang GH et al., Synthesis of carbon quantum dots-doped dummy molecularly imprinted polymer monolithic column for selective enrichment and analysis of aflatoxin B1 in peanut.
Journal of Pharmaceutical and Biomedical Analysis, 149, 258-264, (2018)
   

aflatoxin B1

Arak H et al., Comparative evaluation of aflatoxin and mineral binding activity of molecular imprinted polymer designed for dummy template using in vitro and in vivo models.
Toxicon, 166, 66-75, (2019)
   

aflatoxin B1

Chmangui A et al., Aflatoxins screening in non-dairy beverages by Mn-doped ZnS quantum dots - Molecularly imprinted polymer fluorescent probe.
Talanta, 199, 65-71, (2019)
   

aflatoxin B2

Chmangui A et al., Aflatoxins screening in non-dairy beverages by Mn-doped ZnS quantum dots - Molecularly imprinted polymer fluorescent probe.
Talanta, 199, 65-71, (2019)
   

aflatoxin B1

Gu Y et al., Quartz crystal microbalance sensor based on covalent organic framework composite and molecularly imprinted polymer of poly(o-aminothiophenol) with gold nanoparticles for the determination of aflatoxin B1.
Sensors and Actuators B: Chemical, 291, 293-297, (2019)
   

aflatoxin B1

Guo PQ et al., Rapid detection of aflatoxin B1 by dummy template molecularly imprinted polymer capped CdTe quantum dots.
Analytical and Bioanalytical Chemistry, 411, (12), 2607-2617, (2019)
   

aflatoxin B1

Liang YT et al., An amino-functionalized zirconium-based metal-organic framework of type UiO-66-NH2 covered with a molecularly imprinted polymer as a sorbent for the extraction of aflatoxins AFB1, AFB2, AFG1 and AFG2 from grain.
Microchimica Acta, 187, (1), Article32-(2019)
   

aflatoxin B2

Liang YT et al., An amino-functionalized zirconium-based metal-organic framework of type UiO-66-NH2 covered with a molecularly imprinted polymer as a sorbent for the extraction of aflatoxins AFB1, AFB2, AFG1 and AFG2 from grain.
Microchimica Acta, 187, (1), Article32-(2019)
   

aflatoxin B2

Rui CF et al., Selective extraction and enrichment of aflatoxins from food samples by mesoporous silica FDU-12 supported aflatoxins imprinted polymers based on surface molecularly imprinting technique.
Talanta, 201, 342-349, (2019)
   

aflatoxin B1

Rui CF et al., Selective extraction and enrichment of aflatoxins from food samples by mesoporous silica FDU-12 supported aflatoxins imprinted polymers based on surface molecularly imprinting technique.
Talanta, 201, 342-349, (2019)
   

aflatoxin B1

Sergeyeva T et al., Development of a smartphone-based biomimetic sensor for aflatoxin B1 detection using molecularly imprinted polymer membranes.
Talanta, 201, 204-210, (2019)
   

aflatoxin B1

Song LX et al., Combined biocompatible medium with molecularly imprinted polymers for determination of aflatoxins B1 in real sample.
Journal of Separation Science, 42, (24), 3679-3687, (2019)
   

aflatoxin B1

Akgönüllü S et al., SPR nanosensor based on molecularly imprinted polymer film with gold nanoparticles for sensitive detection of aflatoxin B1.
Talanta, 219, Article121219-(2020)
   

aflatoxin B2

El Alami El Hassani N et al., Recent development of an electrochemical imprinted sensor for the detection of trace-level of unmetabolized aflatoxin B2 in dairy milk.
Journal of Electroanalytical Chemistry, 865, Article114123-(2020)
   

aflatoxin B1

Jayasinghe GDTM et al., Ultrasound assisted combined molecularly imprinted polymer for the selective micro-solid phase extraction and determination of aflatoxins in fish feed using liquid chromatography-tandem mass spectrometry.
Journal of Chromatography A, 1609, Article460431-(2020)
   

aflatoxin B2

Jayasinghe GDTM et al., Ultrasound assisted combined molecularly imprinted polymer for the selective micro-solid phase extraction and determination of aflatoxins in fish feed using liquid chromatography-tandem mass spectrometry.
Journal of Chromatography A, 1609, Article460431-(2020)
   

aflatoxin B1

Chmangui A et al., Assessment of trace levels of aflatoxins AFB1 and AFB2 in non-dairy beverages by molecularly imprinted polymer based micro solid-phase extraction and liquid chromatography-tandem mass spectrometry.
Analytical Methods, 13, (30), 3433-3443, (2021)
   

aflatoxin B2

Chmangui A et al., Assessment of trace levels of aflatoxins AFB1 and AFB2 in non-dairy beverages by molecularly imprinted polymer based micro solid-phase extraction and liquid chromatography-tandem mass spectrometry.
Analytical Methods, 13, (30), 3433-3443, (2021)
   

aflatoxin B1

Jin YX et al., Photocatalytic Fuel Cell-Assisted Molecularly Imprinted Self-Powered Sensor: A Flexible and Sensitive Tool for Detecting Aflatoxin B1.
Analytical Chemistry, 93, (39), 13204-13211, (2021)
   

aflatoxin B1

Singh AK et al., A simple detection platform based on molecularly imprinted polymer for AFB1 and FuB1 mycotoxins.
Microchemical Journal, 171, Article106730-(2021)
   

aflatoxin B2

Song LX et al., Preparation and properties of aflatoxins imprinted polymer grafted onto the surface of mesoporous silica SBA-15 functionalized with double bonds.
Journal of Separation Science, 44, (22), 4181-4189, (2021)
   

aflatoxin B1

Song LX et al., Preparation and properties of aflatoxins imprinted polymer grafted onto the surface of mesoporous silica SBA-15 functionalized with double bonds.
Journal of Separation Science, 44, (22), 4181-4189, (2021)
   

aflatoxin B1

Wang CY et al., Molecularly imprinted photoelectrochemical sensor for aflatoxin B1 detection based on organic/inorganic hybrid nanorod arrays.
Sensors and Actuators B: Chemical, 339, Article129900-(2021)
   

aflatoxin G1

Szumski M et al., Monolithic molecularly imprinted polymeric capillary columns for isolation of aflatoxins.
Journal of Chromatography A, 1364, 163-170, (2014)
   

aflatoxin G2

Szumski M et al., Monolithic molecularly imprinted polymeric capillary columns for isolation of aflatoxins.
Journal of Chromatography A, 1364, 163-170, (2014)
   

aflatoxin G1

Díaz-Bao M et al., A facile method for the fabrication of magnetic molecularly imprinted stir-bars: A practical example with aflatoxins in baby foods.
Journal of Chromatography A, 1471, 51-59, (2016)
   

aflatoxin G2

Díaz-Bao M et al., A facile method for the fabrication of magnetic molecularly imprinted stir-bars: A practical example with aflatoxins in baby foods.
Journal of Chromatography A, 1471, 51-59, (2016)
   

aflatoxin G1

Tan L et al., Ultra-high performance liquid chromatography combined with mass spectrometry for determination of aflatoxins using dummy molecularly imprinted polymers deposited on silica-coated magnetic nanoparticles.
Microchimica Acta, 183, (4), 1469-1477, (2016)
   

aflatoxin G2

Tan L et al., Ultra-high performance liquid chromatography combined with mass spectrometry for determination of aflatoxins using dummy molecularly imprinted polymers deposited on silica-coated magnetic nanoparticles.
Microchimica Acta, 183, (4), 1469-1477, (2016)
   

aflatoxin G1

Bayram E et al., Multiclonal plastic antibodies for selective aflatoxin extraction from food samples.
Food Chemistry, 221, 829-837, (2017)
   

aflatoxin G2

Bayram E et al., Multiclonal plastic antibodies for selective aflatoxin extraction from food samples.
Food Chemistry, 221, 829-837, (2017)
   

aflatoxin G1

Chmangui A et al., Aflatoxins screening in non-dairy beverages by Mn-doped ZnS quantum dots - Molecularly imprinted polymer fluorescent probe.
Talanta, 199, 65-71, (2019)
   

aflatoxin G2

Chmangui A et al., Aflatoxins screening in non-dairy beverages by Mn-doped ZnS quantum dots - Molecularly imprinted polymer fluorescent probe.
Talanta, 199, 65-71, (2019)
   

aflatoxin G1

Liang YT et al., An amino-functionalized zirconium-based metal-organic framework of type UiO-66-NH2 covered with a molecularly imprinted polymer as a sorbent for the extraction of aflatoxins AFB1, AFB2, AFG1 and AFG2 from grain.
Microchimica Acta, 187, (1), Article32-(2019)
   

aflatoxin G2

Liang YT et al., An amino-functionalized zirconium-based metal-organic framework of type UiO-66-NH2 covered with a molecularly imprinted polymer as a sorbent for the extraction of aflatoxins AFB1, AFB2, AFG1 and AFG2 from grain.
Microchimica Acta, 187, (1), Article32-(2019)
   

aflatoxin G2

Rui CF et al., Selective extraction and enrichment of aflatoxins from food samples by mesoporous silica FDU-12 supported aflatoxins imprinted polymers based on surface molecularly imprinting technique.
Talanta, 201, 342-349, (2019)
   

aflatoxin G1

Rui CF et al., Selective extraction and enrichment of aflatoxins from food samples by mesoporous silica FDU-12 supported aflatoxins imprinted polymers based on surface molecularly imprinting technique.
Talanta, 201, 342-349, (2019)
   

aflatoxin G1

Jayasinghe GDTM et al., Ultrasound assisted combined molecularly imprinted polymer for the selective micro-solid phase extraction and determination of aflatoxins in fish feed using liquid chromatography-tandem mass spectrometry.
Journal of Chromatography A, 1609, Article460431-(2020)
   

aflatoxin G2

Jayasinghe GDTM et al., Ultrasound assisted combined molecularly imprinted polymer for the selective micro-solid phase extraction and determination of aflatoxins in fish feed using liquid chromatography-tandem mass spectrometry.
Journal of Chromatography A, 1609, Article460431-(2020)
   

aflatoxin G2

Song LX et al., Preparation and properties of aflatoxins imprinted polymer grafted onto the surface of mesoporous silica SBA-15 functionalized with double bonds.
Journal of Separation Science, 44, (22), 4181-4189, (2021)
   

aflatoxin G1

Song LX et al., Preparation and properties of aflatoxins imprinted polymer grafted onto the surface of mesoporous silica SBA-15 functionalized with double bonds.
Journal of Separation Science, 44, (22), 4181-4189, (2021)
   

aflatoxin M1

Wei SL et al., Molecularly imprinted solid phase extraction coupled to high performance liquid chromatography for determination of aflatoxin M1 and B1 in foods and feeds.
RSC Advances, 5, (27), 20951-20960, (2015)
   

aflatoxin M1

Díaz-Bao M et al., A facile method for the fabrication of magnetic molecularly imprinted stir-bars: A practical example with aflatoxins in baby foods.
Journal of Chromatography A, 1471, 51-59, (2016)
   

aflatoxin M1

Bayram E et al., Multiclonal plastic antibodies for selective aflatoxin extraction from food samples.
Food Chemistry, 221, 829-837, (2017)
   

aflatoxin M1

Bodbodak S et al., Selective decontamination of aflatoxin M1 in milk by molecularly imprinted polymer coated on the surface of stainless steel plate.
International Journal of Dairy Technology, 71, (4), 868-878, (2018)
   

aflatoxins

Díaz-Bao M et al., A facile method for the fabrication of magnetic molecularly imprinted stir-bars: A practical example with aflatoxins in baby foods.
Journal of Chromatography A, 1471, 51-59, (2016)
   

aflatoxins

Tan L et al., Ultra-high performance liquid chromatography combined with mass spectrometry for determination of aflatoxins using dummy molecularly imprinted polymers deposited on silica-coated magnetic nanoparticles.
Microchimica Acta, 183, (4), 1469-1477, (2016)
   

aflatoxins

Bayram E et al., Multiclonal plastic antibodies for selective aflatoxin extraction from food samples.
Food Chemistry, 221, 829-837, (2017)
   

aflatoxins

Arak H et al., Comparative evaluation of aflatoxin and mineral binding activity of molecular imprinted polymer designed for dummy template using in vitro and in vivo models.
Toxicon, 166, 66-75, (2019)
   

aflatoxins

Rui CF et al., Selective extraction and enrichment of aflatoxins from food samples by mesoporous silica FDU-12 supported aflatoxins imprinted polymers based on surface molecularly imprinting technique.
Talanta, 201, 342-349, (2019)
   

aflatoxins

Jayasinghe GDTM et al., Ultrasound assisted combined molecularly imprinted polymer for the selective micro-solid phase extraction and determination of aflatoxins in fish feed using liquid chromatography-tandem mass spectrometry.
Journal of Chromatography A, 1609, Article460431-(2020)
   

aflatoxins

Jayasinghe GDTM et al., Miniaturized vortex assisted-dispersive molecularly imprinted polymer micro-solid phase extraction and HPLC-MS/MS for assessing trace aflatoxins in cultured fish.
Analytical Methods, 12, (35), 4351-4362, (2020)
   

aflatoxins

Madurangika Jayasinghe GDT et al., Room temperature phosphorescent determination of aflatoxins in fish feed based on molecularly imprinted polymer - Mn-doped ZnS quantum dots.
Analytica Chimica Acta, 1103, 183-191, (2020)
   

aflatoxins

Chmangui A et al., Assessment of trace levels of aflatoxins AFB1 and AFB2 in non-dairy beverages by molecularly imprinted polymer based micro solid-phase extraction and liquid chromatography-tandem mass spectrometry.
Analytical Methods, 13, (30), 3433-3443, (2021)
   

aflatoxins

Song LX et al., Preparation and properties of aflatoxins imprinted polymer grafted onto the surface of mesoporous silica SBA-15 functionalized with double bonds.
Journal of Separation Science, 44, (22), 4181-4189, (2021)
   

AFM1

Bodbodak S et al., Selective decontamination of aflatoxin M1 in milk by molecularly imprinted polymer coated on the surface of stainless steel plate.
International Journal of Dairy Technology, 71, (4), 868-878, (2018)
   

AFP

Miyata T et al., Relationship between structures and molecule-responsive behavior of molecularly imprinted gels.
Polymer Preprints, Japan, 54, (2), 4747-4748, (2005)
   

AFP

Li L et al., Photolithographic Boronate Affinity Molecular Imprinting: A General and Facile Approach for Glycoprotein Imprinting.
Angewandte Chemie International Edition, 52, (29), 7451-7454, (2013)
   

AFP

Bi XD et al., Facile Preparation of Glycoprotein-Imprinted 96-Well Microplates for Enzyme-Linked Immunosorbent Assay by Boronate Affinity-Based Oriented Surface Imprinting.
Analytical Chemistry, 86, (1), 959-966, (2014)
   

AFP

Lee MH et al., Extraction of alpha-fetoprotein (AFP) with magnetic albuminoid-imprinted poly(ethylene-co-vinyl alcohol) nanoparticles from human hepatocellular carcinoma HepG2 cellular culture medium.
RSC Advances, 4, (70), 36990-36995, (2014)
   

AFP

Ye J et al., A Boronate Affinity Sandwich Assay: An Appealing Alternative to Immunoassays for the Determination of Glycoproteins.
Angewandte Chemie International Edition, 53, (39), 10386-10389, (2014)
   

AFP

Wang D et al., Simultaneous electrochemical immunoassay using graphene-Au grafted recombinant apoferritin-encoded metallic labels as signal tags and dual-template magnetic molecular imprinted polymer as capture probes.
Biosensors and Bioelectronics, 65, 78-82, (2015)
   

AFP

Karfa P et al., RETRACTED - A battle between spherical and cube-shaped Ag/AgCl nanoparticle modified imprinted polymer to achieve femtogram detection of alpha-feto protein.
Journal of Materials Chemistry B, 4, (33), 5534-5547, (2016)
   

AFP

Karfa P et al., Development of carbon dots modified fluorescent molecular imprinted Polymer@Ag/AgCl nanoparticle for hepatocellular carcinoma marker.
AIP Conference Proceedings, 1832, (1), ArticleNo050008-(2017)
   

AFP

Muhammad P et al., Molecularly Imprinted Plasmonic Substrates for Specific and Ultrasensitive Immunoassay of Trace Glycoproteins in Biological Samples.
ACS Applied Materials & Interfaces, 9, (13), 12082-12091, (2017)
   

AFP

Chen GS et al., Allochroic-Graphene Oxide Linked 3D Oriented Surface Imprinting Strategy for Glycoproteins Assays.
Advanced Functional Materials, 28, (40), ArticleNo1804129-(2018)
   

AFP

Lai YX et al., A novel α-fetoprotein-MIP immunosensor based on AuNPs/PTh modified glass carbon electrode.
Chinese Chemical Letters, 30, (1), 160-162, (2019)
   

AFP

Morishige T et al., Post-Imprinting-Modified Molecularly Imprinted Nanocavities with Two Synergetic, Orthogonal, Glycoprotein-Binding Sites to Transduce Binding Events into Fluorescence Changes.
ChemNanoMat, 5, (2), 224-229, (2019)
   

AFP

Sun CH et al., A biomimetic fluorescent nanosensor based on imprinted polymers modified with carbon dots for sensitive detection of alpha-fetoprotein in clinical samples.
Analyst, 144, (22), 6760-6772, (2019)
   

AFP

Tawfik SM et al., Dual emission nonionic molecular imprinting conjugated polythiophenes-based paper devices and their nanofibers for point-of-care biomarkers detection.
Biosensors and Bioelectronics, 160, Article112211-(2020)
   

AFP

Wang ZD et al., A rational route to hybrid aptamer-molecularly imprinted magnetic nanoprobe for recognition of protein biomarkers in human serum.
Analytica Chimica Acta, 1128, 1-10, (2020)
   

AFP

Sunayama H et al., Simultaneous Detection of Two Tumor Marker Proteins Using Dual-Colored Signaling Molecularly Imprinted Polymers Prepared via Multi-Step Post-Imprinting Modifications.
Bulletin of the Chemical Society of Japan, 94, (2), 525-531, (2021)
   

AFs

Arak H et al., Comparative evaluation of aflatoxin and mineral binding activity of molecular imprinted polymer designed for dummy template using in vitro and in vivo models.
Toxicon, 166, 66-75, (2019)
   

AFs

Jayasinghe GDTM et al., Miniaturized vortex assisted-dispersive molecularly imprinted polymer micro-solid phase extraction and HPLC-MS/MS for assessing trace aflatoxins in cultured fish.
Analytical Methods, 12, (35), 4351-4362, (2020)
   

Ag+

Huo HY et al., Adsorption of Ag+ by a surface molecular-imprinted biosorbent.
Chemical Engineering Journal, 150, (1), 139-144, (2009)
   

Ag+

Huo HY et al., Effect of trace Ag+ adsorption on degradation of organic dye wastes.
Biochemical Engineering Journal, 43, (1), 2-7, (2009)
   

Ag+

Chen EZ et al., Antimicrobial properties of silver nanoparticles synthesized by bioaffinity adsorption coupled with TiO2 photocatalysis.
Journal of Chemical Technology & Biotechnology, 86, (3), 421-427, (2011)
   

Ag

Hashemi-Moghaddam H et al., Synthesis of a New Molecularly Imprinted Polymer for Sorption of the Silver Ions from Geological and Antiseptic Samples for Determination by Flame Atomic Absorption Spectrometry.
Journal of AOAC International, 97, (5), 1434-1438, (2014)
   

AG

Lai JP et al., Molecularly imprinted microspheres for the anticancer drug aminoglutethimide: Synthesis, characterization, and solid-phase extraction applications in human urine samples.
Journal of Separation Science, 37, (9-10), 1170-1176, (2014)
   

AG

Tang L et al., Macromolecular crowding of molecular imprinting: A facile pathway to produce drug delivery devices for zero-order sustained release.
International Journal of Pharmaceutics, 496, (2), 822-833, (2015)
   

AG16

Foguel MV et al., Molecularly Imprinted Polymer (MIP): A Promising Recognition System for Development of Optical Sensor for Textile Dyes.
Procedia Technology, 27, 299-300, (2017)
   

AG16

Foguel MV et al., Synthesis and evaluation of a molecularly imprinted polymer for selective adsorption and quantification of Acid Green 16 textile dye in water samples.
Talanta, 170, 244-251, (2017)
   

AG

Yang BX et al., Simultaneous Determination of 11 Aminoglycoside Residues in Honey, Milk, and Pork by Liquid Chromatography with Tandem Mass Spectrometry and Molecularly Imprinted Polymer Solid Phase Extraction.
Journal of AOAC International, 100, (6), 1869-1878, (2017)
   

Ag(0)

Essawy AA, Silver imprinted zinc oxide nanoparticles: Green synthetic approach, characterization and efficient sunlight-induced photocatalytic water detoxification.
Journal of Cleaner Production, 183, 1011-1020, (2018)
   

AG16

Mortari B et al., A spot test for direct quantification of acid green 16 adsorbed on a molecularly imprinted polymer through diffuse reflectance measurements.
Analytical Methods, 13, (4), 453-461, (2021)
   

AGEs

Yamazaki T et al., Molecular recognition of AGEs using molecularly imprinted polymer.
Nippon Kagakkai Koen Yokoshu, 86, (2), 944-(2006)
   

Ag(I)

Harkins DA et al., Preparation of site-selective ion-exchange resins.
Separation Science and Technology, 26, (3), 345-354, (1991)
   

Ag(I)

Shawky HA, Synthesis of ion-imprinting chitosan/PVA crosslinked membrane for selective removal of Ag(I).
Journal of Applied Polymer Science, 114, (5), 2608-2615, (2009)
   

Ag(I)

Wang XW et al., Enrichment and separation of silver from waste solutions by metal ion imprinted membrane.
Hydrometallurgy, 100, (1-2), 82-86, (2009)
   

Ag(I)

Fan LL et al., Removal of Ag+ from water environment using a novel magnetic thiourea-chitosan imprinted Ag+.
Journal of Hazardous Materials, 194, (1), 193-201, (2011)
   

Ag(I)

Proceeding, Mittal V et al, Ion-imprinted chitosan hydrogel for recovering Ag(I) from aqueous solution, 
(2012)
   

Ag(I)

Song X et al., Molecular-Ion-Imprinted Chitosan Hydrogels for the Selective Adsorption of Silver(I) in Aqueous Solution.
Industrial & Engineering Chemistry Research, 51, (34), 11261-11265, (2012)
   

Ag(I)

Zhang L et al., Improvement of Ag(I) adsorption onto chitosan/triethanolamine composite sorbent by an ion-imprinted technology.
Applied Surface Science, 263, 696-703, (2012)
   

Ag(I)

Ahamed MEH et al., Ion imprinted polymers for the selective extraction of silver(I) ions in aqueous media: Kinetic modeling and isotherm studies.
Reactive and Functional Polymers, 73, (3), 474-483, (2013)
   

Ag(I)

Hashemi-Moghaddam H et al., Synthesis a new adsorbent of molecularly imprinted polymer for absorb the silver ions from biological sample.
E3S Web of Conferences, 1, Art. No. 39001-(2013)
   

Ag(I)

Shamsipur M et al., Silver ion imprinted polymer nanobeads based on a aza-thioether crown containing a 1,10-phenanthroline subunit for solid phase extraction and for voltammetric and potentiometric silver sensors.
Analytica Chimica Acta, 852, 223-235, (2014)
   

Ag(I)

Dadfarnia S et al., Synthesis of Nano-Pore Size Ag(I)-Imprinted Polymer for the Extraction and Preconcentration of Silver Ions Followed by Its Determination with Flame Atomic Absorption Spectrometry and Spectrophotometry Using Localized Surface Plasmon Resonance Peak of Silver Nanoparticles.
Journal of the Brazilian Chemical Society, 26, (6), 1180-1190, (2015)
   

Ag(I)

Hou HB et al., Preparation and Properties of Ion-Imprinted Hollow Particles for the Selective Adsorption of Silver Ions.
Langmuir, 31, (4), 1376-1384, (2015)
   

Ag(I)

Kazemi E et al., Development and evaluation of selective coating for stir bar sorptive extraction of silver using sol-gel technique in combination with double-imprinting concept.
Journal of the Iranian Chemical Society, 12, (6), 929-936, (2015)
   

Ag(I)

Kazemi E et al., Synthesis and characterization of a nanomagnetic ion imprinted polymer for selective extraction of silver ions from aqueous samples.
Microchimica Acta, 182, (5-6), 1025-1033, (2015)
   

Ag(I)

Kyzas GZ et al., Characterization of binding properties of silver ion-imprinted polymers with equilibrium and kinetic models.
Journal of Molecular Liquids, 212, 133-141, (2015)
   

Ag(I)

Xiang GQ et al., A surface ion imprinted magnetic silica sorbent for the separation and determination of leaching silver in antibacterial food contact products.
Canadian Journal of Chemistry - Revue Canadienne de Chimie, 93, (6), 621-625, (2015)
   

Ag(I)

Zhang M et al., Selective adsorption of Ag+ by ion-imprinted O-carboxymethyl chitosan beads grafted with thiourea-glutaraldehyde.
Chemical Engineering Journal, 264, 56-65, (2015)
   

Ag(I)

Zhang M et al., Ion-imprinted chitosan gel beads for selective adsorption of Ag+ from aqueous solutions.
Carbohydrate Polymers, 130, 206-212, (2015)
   

Ag(I)

Sun H et al., A novel fluorescent multi-functional monomer for preparation of silver ion-imprinted fluorescent on-off chemosensor.
Sensors and Actuators B: Chemical, 224, 485-491, (2016)
   

Ag(I)

Zhiani R et al., Selective voltammetric sensor for nanomolar detection of silver ions using carbon paste electrode modified with novel nanosized Ag(I)-imprinted polymer.
Journal of Molecular Liquids, 219, 554-560, (2016)
   

Ag(I)

Behbahani M et al., Selective and sensitive determination of silver ions at trace levels based on ultrasonic-assisted dispersive solid-phase extraction using ion-imprinted polymer nanoparticles.
Applied Organometallic Chemistry, 31, (11), ArticleNoe3758-(2017)
   

Ag(I)

Ghanei-Motlagh M et al., Magnetic silver(I) ion-imprinted polymeric nanoparticles on a carbon paste electrode for voltammetric determination of silver(I).
Microchimica Acta, 184, (6), 1691-1699, (2017)
   

Ag(I)

Mirzaei M et al., Selective ion-imprinted polymers for preconcentration and determination of silver in water and hair by electrothermal atomic absorption spectrometry.
Journal of Analytical Chemistry, 72, (1), 70-75, (2017)
   

Ag(I)

Patra S et al., Triple signalling mode carbon dots-based biodegradable molecularly imprinted polymer as a multi-tasking visual sensor for rapid and "on-site" monitoring of silver ions.
Journal of Materials Chemistry C, 5, (45), 11965-11976, (2017)
   

Ag(I)

Yin XC et al., Recovery of Silver from Wastewater Using a New Magnetic Photocatalytic Ion-Imprinted Polymer.
ACS Sustainable Chemistry & Engineering, 5, (3), 2090-2097, (2017)
   

Ag(I)

Jalilian R et al., Synthesis and application of a novel core-shell-shell magnetic ion imprinted polymer as a selective adsorbent of trace amounts of silver ions.
E-Polymers, 18, (2), 123-134, (2018)
   

Ag(I)

Liu X et al., A novel non-imprinted adsorbent with superior selectivity towards high-performance capture of Ag(I).
Chemical Engineering Journal, 348, 224-231, (2018)
   

Ag(I)

Sener I et al., Methacryloyloxycalix[4]arene based ion imprinted polymer as Ag(I) potentiometric sensor.
Indian Journal of Chemistry Section A, 57A, (3), 444-448, (2018)
   

Ag(I)

Lu HZ et al., A dual reference ion-imprinted ratiometric fluorescence probe for simultaneous detection of silver (I) and lead (II).
Sensors and Actuators B: Chemical, 288, 691-698, (2019)
   

AG(I)

Sarkaya K et al., Ag+ ions imprinted cryogels for selective removal of silver ions from aqueous solutions.
Separation Science and Technology, 54, (18), 2993-3004, (2019)
   

Ag(I)

Sarkaya K et al., The comparative investigation on synthesis, characterizations of silver ion-imprinting and non-imprinting cryogels, their impedance spectroscopies and relaxation mechanisms.
Polymer Bulletin, 76, (11), 5701-5716, (2019)
   

β-agonists

Fiori M et al., Evaluation of two different clean-up steps, to minimise ion suppression phenomena in ion trap liquid chromatography-tandem mass spectrometry for the multi-residue analysis of β-agonists in calves urine.
Analytica Chimica Acta, 529, (1-2), 207-210, (2005)
   

β-agonists

Kronauer S et al., The Class Selective Extraction of β-Agonists and Antagonists using Molecularly Imprinted Polymer SPE. US Supelco Reporter, 
25, (4), 13-15, (2007)
   

β-agonists

Kronauer S et al., Class-Selective Extraction and Analysis of β-Receptor Agonists and Antagonists using Molecularly Imprinted Polymer SPE. The Reporter Europe, 
29, 8-10, (2008)
   

β-agonists

Widstrand VP, The simultaneous class-selective extraction and analysis of beta-blockers and beta-agonists using molecularly imprinted polymer SPE.
American Laboratory, 40, (9), 6-7, (2008)
   

β2-agonists

Xu ZG et al., Investigation of ractopamine molecularly imprinted stir bar sorptive extraction and its application for trace analysis of β2-agonists in complex samples.
Journal of Chromatography A, 1217, (22), 3612-3618, (2010)
   

β-agonists

Wang LQ et al., Matrix Effects in Analysis of β-Agonists with LC-MS/MS: Influence of Analyte Concentration, Sample Source, and SPE Type.
Journal of Agricultural and Food Chemistry, 60, (25), 6359-6363, (2012)
   

β-agonists

Wang PL et al., Determination of Four Kinds of β-Agonists in Swine Urine by Molecularly Imprinted Solid Phase Extraction Followed Gas Chromatography Coupled Mass Spectrometry.
Chinese Journal of Analytical Chemistry, 40, (3), 470-473, (2012)
   

β2-agonists

Fan S et al., Simultaneous and confirmative detection of multi-residues of β2-agonists and β-blockers in urine using LC-MS/MS/MS coupled with β-receptor molecular imprinted polymer SPE clean-up.
Food Additives & Contaminants: Part A, 30, (12), 2093-2101, (2013)
   

β-agonists

Lin XY et al., A novel electrochemical sensor for the analysis of β-agonists: The poly(acid chrome blue K)/graphene oxide-nafion/glassy carbon electrode.
Journal of Hazardous Materials, 260, 508-517, (2013)
   

β-agonists

Wang PL et al., Synthesis of ractopamine molecularly imprinted membrane and its application in the rapid determination of three β-agonists in porcine urine samples.
Journal of Separation Science, 36, (8), 1455-1462, (2013)
   

β2-agonists

Wang PL et al., Determination of β2-Agonists in Porcine Urine by Molecularly Imprinted Solid Phase Extraction Followed Ultra-Performance Liquid Chromatography-Tandem Mass Spectrometry Detection.
Analytical Letters, 46, (5), 734-744, (2013)
   

β2-agonists

Xu W et al., Electrochemical sensor based on a carbon nanotube-modified imprinted sol-gel for selective and sensitive determination of β2-agonists.
Microchimica Acta, 180, (11-12), 1005-1011, (2013)
   

β2-agonists

Cao WY et al., A β2-agonist sensor based on a molecularly imprinted poly-o-phenylenediamine film on a columnar-structured platinum electrode.
Analytical Methods, 6, (7), 2349-2355, (2014)
   

β-agonists

Chen X et al., Chemiluminescence diminishment on a paper-based analytical device: high throughput determination of β-agonists in swine hair.
Analytical Methods, 6, (24), 9684-9690, (2014)
   

β2-agonists

Lei RL et al., A Novel Electrochemical Sensor for β2-Agonists with High Sensitivity and Selectivity Based on Surface Molecularly Imprinted Sol-gel Doped with Antimony-Doped Tin Oxide.
Electroanalysis, 26, (5), 1004-1012, (2014)
   

β-agonists

Wang PL et al., Sensitive detection of β-agonists in pork tissue with novel molecularly imprinted polymer extraction followed liquid chromatography coupled tandem mass spectrometry detection.
Food Chemistry, 184, 72-79, (2015)
   

β2-agonists

Zhang XL et al., Determination of five β2-agonist residues in pork by ultra-high performance liquid chromatography-tandem mass spectrometry with molecularly imprinted solid phase extraction.
Chinese Journal of Chromatography, 33, (8), 838-842, (2015)
   

β2-agonists

Liu HB et al., Novel method for the rapid and specific extraction of multiple β2-agonist residues in food by tailor-made Monolith-MIPs extraction disks and detection by gas chromatography with mass spectrometry.
Journal of Separation Science, 39, (18), 3578-3585, (2016)
   

β-agonists

Liu HC et al., Magnetic molecularly imprinted polymers for the determination of β-agonist residues in milk by ultra high performance liquid chromatography with tandem mass spectrometry.
Journal of Separation Science, 39, (18), 3594-3601, (2016)
   

β2-agonists

Qiu XZ et al., Fabrication of a molecularly imprinted polymer immobilized membrane with nanopores and its application in determination of β2-agonists in pork samples.
Journal of Chromatography A, 1429, 79-85, (2016)
   

β2-agonists

Wang LJ et al., Rapid determination of 15 β2-agonists residues in swine urine by ultra performance liquid chromatography-tandem mass spectrometry coupled with molecularly imprinted solid phase extraction.
Chinese Journal of Chromatography, 34, (3), 240-248, (2016)
   

β-agonists

Suo DC et al., Pseudo template molecularly imprinted polymer for determination of 14 kind of β-agonists in animal urine by ultra-high-performance liquid chromatography-tandem mass spectrometry.
Journal of Chromatography A, 1526, 23-30, (2017)
   

β-agonists

Tang JW et al., Determination of β-Agonist Residues in Animal-Derived Food by a Liquid Chromatography-Tandem Mass Spectrometric Method Combined with Molecularly Imprinted Stir Bar Sorptive Extraction.
Journal of Analytical Methods in Chemistry, 2018, ArticleID9053561-(2018)
   

β-agonists

Yuan YN et al., Selective extraction and detection of β-agonists in swine urine for monitoring illegal use in livestock breeding.
Food Chemistry, 313, Article126155-(2020)
   

agroclavine

Suedee R et al., Recognition Properties and Competitive Assays of a Dual Dopamine/Serotonin Selective Molecularly Imprinted Polymer.
International Journal of Molecular Sciences, 9, (12), 2333-2356, (2008)
   

AGT

Kadhirvel P et al., Aminoglutethimide-imprinted xerogels in bulk and spherical formats, based on a multifunctional organo-alkoxysilane precursor.
Journal of Chromatography A, 1424, 59-68, (2015)
   

AHA

Feng F et al., A novel quartz crystal microbalance sensor array based on molecular imprinted polymers for simultaneous detection of clenbuterol and its metabolites.
Talanta, 167, 94-102, (2017)
   

AHLs

Susmel S et al., Selectivity and Efficiency of Conductive Molecularly Imprinted Polymer (c-MIP) Based on 5-Phenyl-Dipyrromethane and 5-Phenol-Dipyrromethane for Quorum Sensing Precursors Detection.
Chemosensors, 5, (1), ArticleNo5-(2017)
   

AHLs

Fa SX et al., Synthetic nanoparticles for selective hydrolysis of bacterial autoinducers in quorum sensing.
Bioorganic & Medicinal Chemistry Letters, 29, (8), 978-981, (2019)
   

AHLs

Cui ZM et al., Novel magnetic fluorescence probe based on carbon quantum dots-doped molecularly imprinted polymer for AHLs signaling molecules sensing in fish juice and milk.
Food Chemistry, 328, Article127063-(2020)
   

AI

Song SH et al., Recognition of Solution Structures of Peptides by Molecularly Imprinted Cyclodextrin Polymers.
Macromolecules, 40, (10), 3530-3532, (2007)
   

AII

Song SH et al., Recognition of Solution Structures of Peptides by Molecularly Imprinted Cyclodextrin Polymers.
Macromolecules, 40, (10), 3530-3532, (2007)
   

ailanthone

Anfossi L et al., Selective enrichment of ailanthone from leaves of ailanthus altissima by tandem reverse phase/molecularly imprinted solid phase extraction.
Microchemical Journal, 158, Article105198-(2020)
   

AITC

Huang YA et al., Development of an active packaging with molecularly imprinted polymers for beef preservation.
Packaging Technology and Science, 31, (4), 213-220, (2018)
   

ajinomoto

Anirudhan TS et al., Selective determination of monosodium glutamate (Ajinomoto) in food samples using a potentiometric method with a modified multiwalled carbon nanotube based molecularly imprinted polymer.
RSC Advances, 5, (117), 96840-96850, (2015)
   

AKBA

Lakka A et al., Isolation of hypoxia-inducible factor 1 (HIF-1) inhibitors from frankincense using a molecularly imprinted polymer.
Investigational New Drugs, 29, (5), 1081-1089, (2011)
   

Al3+

Demircelik AH et al., Molecular Recognition-Based Detoxification of Aluminum in Human Plasma.
Journal of Biomaterials Science-Polymer Edition, 20, (9), 1235-1258, (2009)
   

Ala

Cheng SL et al., Preparation and adsorption characteristics of amino acids magnetic molecularly imprinted plymer microspheres.
Journal of Functional Materials, 43, (22), 3101-3105, (2012)
   

ALA

Zhu QJ et al., Research progress in anti-oxidative and thermo-sensitive lipoic acid molecularly imprinted polymers.
Journal of Food Safety and Quality, 4, (6), 1785-1789, (2013)
   

Ala

Zhu FL et al., Preparation and recognition characteristics of alanine surface molecularly imprinted polymers.
Analytical Methods, 7, (20), 8740-8749, (2015)
   

ALA

Elshafey R et al., Electrochemical impedance sensor for herbicide alachlor based on imprinted polymer receptor.
Journal of Electroanalytical Chemistry, 813, 171-177, (2018)
   

alachlor

Wang Y et al., Molecularly imprinted solid-phase extraction coupled with gas chromatography for the determination of four chloroacetamide herbicides in soil.
Analytical Methods, 7, (15), 6411-6418, (2015)
   

alachlor

Li M et al., A Novel 2-Acrylamide-6-Methoxybenzothiazole Fabricated Molecularly Imprinted Polymers for Direct Fluorescent Sensing of Alachlor.
Chromatographia, 79, (1), 71-78, (2016)
   

alachlor

Elshafey R et al., Electrochemical impedance sensor for herbicide alachlor based on imprinted polymer receptor.
Journal of Electroanalytical Chemistry, 813, 171-177, (2018)
   

alachlor

Myburgh P et al., Selective Solid-Phase Extraction Using Molecularly Imprinted Polymers for the Analysis of Target Pesticides in Cannabis Bud.
South African Journal of Chemistry, 75, 142-149, (2021)
   

Ala-Lys

Schirmer C et al., Synthesis and Evaluation of Molecularly Imprinted Polymers (MIP) with Affinity for the Polypeptide Nisin.
Food Analytical Methods, 2, (4), 257-263, (2009)
   

alanine

Richter A et al., Processing and morphology of molecularly imprinted nylon thin films.
Journal of Applied Polymer Science, 101, (5), 2919-2926, (2006)
   

alanine

BelBruno JJ et al., Detection of functional states of molecularly imprinted thin films with multi-cycling nanoindentation.
Polymer, 48, (6), 1679-1687, (2007)
   

alanine

BelBruno JJ et al., Capacitive sensing of amino acids in molecularly imprinted nylon films.
Sensors and Actuators B: Chemical, 155, (2), 915-918, (2011)
   

Alanine

Cheng SL et al., Preparation and adsorption characteristics of amino acids magnetic molecularly imprinted plymer microspheres.
Journal of Functional Materials, 43, (22), 3101-3105, (2012)
   

alanine

Di B et al., Anionic surfactant templated chiral nanospheres and their enantioselective adsorption.
New Journal of Chemistry, 37, (5), 1603-1609, (2013)
   

alanine

Zhu FL et al., Preparation and recognition characteristics of alanine surface molecularly imprinted polymers.
Analytical Methods, 7, (20), 8740-8749, (2015)
   

alanine anilide

Hamase K et al., Selective masking of amino groups during fluorescence derivatization in the presence of a molecular imprint polymer.
Analytical Sciences, 16, (4), 417-419, (2000)
   

β-alanyl-l-histidine

Okutucu B et al., Different approaches to synthesize carnosine selective imprinted polymers.
Materials Science and Engineering: C, 32, (5), 1174-1178, (2012)
   

ALB

Lee MH et al., Extraction of alpha-fetoprotein (AFP) with magnetic albuminoid-imprinted poly(ethylene-co-vinyl alcohol) nanoparticles from human hepatocellular carcinoma HepG2 cellular culture medium.
RSC Advances, 4, (70), 36990-36995, (2014)
   

albendazol

Ahmed F et al., Preparation and Characterization of Molecular Imprinted Polymer for Detection and Selective Removal of Albendazole from Aqueous Solution.
Sensor Letters, 14, (11), 1089-1093, (2016)
   

albendazole

Cacho C et al., Molecularly imprinted polymers: An analytical tool for the determination of benzimidazole compounds in water samples.
Talanta, 78, (3), 1029-1035, (2009)
   

albendazole

Srivastava J et al., A biopolymeric nano-receptor for sensitive and selective recognition of albendazole.
Analytical Methods, 8, (5), 1026-1033, (2016)
   

albendazole

Abidi H et al., A molecularly imprinted polymer coupled with high-performance liquid chromatography-UV for the determination of albendazole in plasma and urine samples: CCD-RSM design.
New Journal of Chemistry, 42, (19), 15937-15945, (2018)
   

albendazole

Tegegne B et al., Molecularly imprinted polymer for adsorption of venlafaxine, albendazole, ciprofloxacin and norfloxacin in aqueous environment.
Separation Science and Technology, 56, (13), 2217-2231, (2021)
   

albendazole

Bustamante-Rangel M et al., Evaluation of the selectivity of molecularly imprinted polymer cartridges for nitroimidazoles. Application to the simultaneous extraction of nitroimidazoles and benzimidazoles from samples of animal origin.
Microchemical Journal, 172, Article107000-(2022)
   

albendazole-2-aminosulfone

Bustamante-Rangel M et al., Evaluation of the selectivity of molecularly imprinted polymer cartridges for nitroimidazoles. Application to the simultaneous extraction of nitroimidazoles and benzimidazoles from samples of animal origin.
Microchemical Journal, 172, Article107000-(2022)
   

albendazole-sulfone

Bustamante-Rangel M et al., Evaluation of the selectivity of molecularly imprinted polymer cartridges for nitroimidazoles. Application to the simultaneous extraction of nitroimidazoles and benzimidazoles from samples of animal origin.
Microchemical Journal, 172, Article107000-(2022)
   

albendazole sulfoxide

da Silva Anacleto S et al., Preparation of an organic-inorganic hybrid molecularly imprinted polymer for effective removal of albendazole sulfoxide enantiomers from aqueous medium.
Journal of Environmental Chemical Engineering, 5, (6), 6179-6187, (2017)
   

albendazole sulfoxide

Anacleto S et al., Assessment of the Performance of Solid Phase Extraction Based on Pipette Tip Employing a Hybrid Molecularly Imprinted Polymer as an Adsorbent for Enantioselective Determination of Albendazole Sulfoxide.
Journal of Chromatographic Science, 57, (7), 671-678, (2019)
   

albendazole sulfoxide

Alipanahpour Dil E et al., A new approach for microextraction of trace albendazole sulfoxide drug from the samples of human plasma and urine, and water by the molecularly imprinted polymer nanoparticles combined with HPLC.
Journal of Chromatography B, 1158, Article122249-(2020)
   

albendazole-sulfoxide

Bustamante-Rangel M et al., Evaluation of the selectivity of molecularly imprinted polymer cartridges for nitroimidazoles. Application to the simultaneous extraction of nitroimidazoles and benzimidazoles from samples of animal origin.
Microchemical Journal, 172, Article107000-(2022)
   

albumin

Shi HQ et al., Template-imprinted nanostructured surfaces for protein recognition.
Nature, 398, (6728), 593-597, (1999)
   

albumin

Proceeding, Chou TC et al, Molecular imprinting and its applications in bio-molecular sensing and purification, 
785, (2005)
   

albumin

Li Y et al., Surface molecularly imprinted polymer nanowires used for protein recognition.
Chemical Journal of Chinese Universities, 26, (9), 1634-1636, (2005)
   

albumin

Hawkins DM et al., Quantification and Confocal Imaging of Protein Specific Molecularly Imprinted Polymers.
Biomacromolecules, 7, (9), 2560-2564, (2006)
   

albumin

Li Y et al., Protein recognition via surface molecularly imprinted polymer nanowires.
Analytical Chemistry, 78, (1), 317-320, (2006)
   

albumin

Long Y et al., Molecular imprinted polymer with positively charged assistant recognition polymer chains for adsorption/enrichment of low content target protein.
Chinese Science Bulletin, 53, (17), 2617-2623, (2008)
   

albumin

Wang HF et al., m-Aminophenylboronic acid as a functional monomer for fabricating molecularly imprinted polymer for the recognition of bovine serum albumin.
Reactive and Functional Polymers, 68, (9), 1291-1296, (2008)
   

albumin

Zhao KY et al., Bovine serum albumin imprinted calcium phosphate/polyacrylate/alginate multi-hybrid polymer microspheres in inverse-phase suspension.
E-Polymers, Art. No. 100-(2008)
   

albumin

Hu CH et al., Albumin molecularly imprinted polymer with high template affinity -- Prepared by systematic optimization in mixed organic/aqueous media.
Microchemical Journal, 91, (1), 53-58, (2009)
   

albumin

Hu CH et al., Albumin molecularly imprinted polymer prepared with a semi-rigid crosslinker in mixed organic/aqueous media.
Microchimica Acta, 165, (3), 399-405, (2009)
   

albumin

Lee MH et al., Formation and Recognition Characteristics of Albumin-imprinted Poly(Ethylene-co-Vinyl-Alcohol) Membranes.
Journal of Nanoscience and Nanotechnology, 9, (6), 3469-3477, (2009)
   

albumin

Book chapter, Sedzik Jet al., Gels Mimicking Antibodies in Their Selective Recognition of Proteins and Its Potential Use for Protein Crystallization, 
In: Molecules: Nucleation, Aggregation And Crystallization, Sedzik J, Riccio P (Eds.) World Scientific: 11-34, (2009)
   

Albumin

Lee MH et al., Synthesis of Magnetic Molecularly Imprinted Poly(ethylene-co-vinyl alcohol) Nanoparticles and Their Uses in the Extraction and Sensing of Target Molecules in Urine.
ACS Applied Materials & Interfaces, 2, (6), 1729-1736, (2010)
   

albumin

Kryscio DR et al., Molecular Docking Simulations for Macromolecularly Imprinted Polymers.
Industrial & Engineering Chemistry Research, 50, (24), 13877-13884, (2011)
   

albumin

Yang HH et al., Depletion of albumin and immunoglobulin G from human serum using epitope-imprinted polymers as artificial antibodies.
Journal of Biomedical Materials Research Part A, 101A, (7), 1935-1942, (2013)
   

albumin

Lee MH et al., Extraction of alpha-fetoprotein (AFP) with magnetic albuminoid-imprinted poly(ethylene-co-vinyl alcohol) nanoparticles from human hepatocellular carcinoma HepG2 cellular culture medium.
RSC Advances, 4, (70), 36990-36995, (2014)
   

albumin

Book chapter, Andac Met al., Molecularly Imprinted Cryogels for Human Serum Albumin Depletion, 
In: Affinity Chromatography, Reichelt S (Ed.) Springer: New York, 233-237, (2015)
   

albumin

Takeuchi T et al., Molecularly Imprinted Nanogels Acquire Stealth In Situ by Cloaking Themselves with Native Dysopsonic Proteins.
Angewandte Chemie International Edition, 56, (25), 7088-7092, (2017)
   

albumin

Demir EF et al., Synthesis and characterization of albumin imprinted polymeric hydrogel membranes for proteomic studies.
Journal of Biomaterials Science-Polymer Edition, 29, (18), 2218-2236, (2018)
   

albumin

Zhang GH et al., A sensitive determination of albumin in urine by molecularly imprinted electrochemical biosensor based on dual-signal strategy.
Sensors and Actuators B: Chemical, 288, 564-570, (2019)
   

albumin

Chien HW et al., Interaction of LiYF4:Yb3+/Er3+/Ho3+/Tm3+@LiYF4:Yb3+ upconversion nanoparticles, molecularly imprinted polymers, and templates.
RSC Advances, 10, (59), 35600-35610, (2020)
   

albuterol

Huang HC et al., A multi-array sensor via the integration of acrylic molecularly imprinted photoresists and ultramicroelectrodes on a glass chip.
Analytica Chimica Acta, 582, (1), 137-146, (2007)
   

Alcian Blue 8GX

Liu ZH et al., Cation-Selective Microcontact Printing Based on Surface-Molecular-Imprinted Layer-by-Layer Films.
Advanced Materials, 22, (24), 2689-2693, (2010)
   

alcohols

Men’shikova AYu et al., Crosslinked monodisperse particles containing luminophore groups in shells for molecular recognition of lower alcohols (Original Russian Text © A.Yu. Men’shikova, N.N. Shevchenko, T.G. Evseeva, A.V. Koshkin, G.A. Pankova, B.M. Shabsel’s, V.V. Faraonova, M.Ya. Goikhman, A.V. Yakimanskii, V.A. Sazhnikov, M.V. Alfimov, 2012, published in Russian in Vysokomolekulyarnye Soedineniya, Ser. B, 2012, Vol. 54, No. 1, pp. 93 - 101.).
Polymer Science Series B, 54, (1), 21-29, (2012)
   

aldehydes

Jha SK et al., Polyacrylic acid polymer and aldehydes template molecule based MIPs coated QCM sensors for detection of pattern aldehydes in body odor.
Sensors and Actuators B: Chemical, 206, 471-487, (2015)
   

aldehydes

Jha SK et al., A quick responding quartz crystal microbalance sensor array based on molecular imprinted polyacrylic acids coating for selective identification of aldehydes in body odor.
Talanta, 134, 105-119, (2015)
   

aldehydes

Li YL et al., Determination of carbonyl pollutants adsorbed on ambient particulate matter of type PM2.5 by using magnetic molecularly imprinted microspheres for sample pretreatment and capillary electrophoresis for separation and quantitation.
Microchimica Acta, 185, (2), ArticleNo122-(2018)
   

aldehydes

Fang SY et al., Determination of aldehydes in water samples by coupling magnetism-reinforced molecular imprinting monolith microextraction and non-aqueous capillary electrophoresis.
Journal of Chromatography A, 1632, Article461602-(2020)
   

aldehyde vapors

Liu CJ et al., Molecularly Imprinted Sol-Gel-Based QCM Sensor Arrays for the Detection and Recognition of Volatile Aldehydes.
Sensors, 17, (2), ArticleNo382-(2017)
   

aldol product

Zheng AX et al., An amphiphilic and photoswitchable organocatalyst for the aldol reaction based on a product-imprinted polymer.
Molecular Catalysis, 442, 115-125, (2017)
   

aldrin

Munyati MO et al., Polyaniline nanoparticles for the selective recognition of aldrin: Synthesis, characterization, and adsorption properties.
Synthetic Metals, 233, 79-85, (2017)
   

ALE

Baeza AN et al., Multiresidue analysis of cephalosporin antibiotics in bovine milk based on molecularly imprinted polymer extraction followed by liquid chromatography-tandem mass spectrometry.
Journal of Chromatography A, 1474, 121-129, (2016)
   

alfuzosin

Chapuis F et al., Molecularly imprinted polymers for the clean-up of a basic drug from environmental and biological samples.
Journal of Chromatography A, 1135, (2), 127-134, (2006)
   

alfuzosin

Hugon-Chapuis F et al., Selective and automated sample pretreatment by molecularly imprinted polymer for the analysis of the basic drug alfuzosin from plasma.
Journal of Chromatography A, 1196-1197, (1-2), 73-80, (2008)
   

algae

Darder Ma et al., Algae-silica systems as functional hybrid materials.
Journal of Materials Chemistry, 20, (42), 9362-9369, (2010)
   

algae

Chen WJ et al., Microcontact Imprinting of Algae on Poly(ethylene-co-vinyl alcohol) for Biofuel Cells.
ACS Applied Materials & Interfaces, 5, (21), 11123-11128, (2013)
   

algae

Lee MH et al., Microcontact Imprinting of Algae for Biofuel Systems: The Effects of the Polymer Concentration.
Langmuir, 30, (46), 14014-14020, (2014)
   

algae

Lee MH et al., Recognition of algae by microcontact-imprinted polymers modulates hydrogenase expression.
RSC Advances, 4, (106), 61557-61563, (2014)
   

algal cells

Lee MH et al., Microcontact Imprinting of Algae for Biofuel Systems: The Effects of the Polymer Concentration.
Langmuir, 30, (46), 14014-14020, (2014)
   

algal cells

Lee MH et al., Recognition of algae by microcontact-imprinted polymers modulates hydrogenase expression.
RSC Advances, 4, (106), 61557-61563, (2014)
   

algal lipids

Yao LX et al., Design and Synthesis of Cross-Linked Micellar Particles to Assist Microalgae Lipid Recovery from Aqueous Extract.
Journal of the American Oil Chemists’ Society, 93, (1), 51-60, (2016)
   

alginic acid

Li G et al., Magnetic molecularly imprinted polymers for recognition and enrichment of polysaccharides from seaweed.
Journal of Separation Science, 40, (24), 4765-4772, (2017)
   

Al(III)

Al-Kindy S et al., Fluorimetric monitoring of molecular imprinted polymer recognition events for aluminium.
Analytical Letters, 35, (11), 1763-1774, (2002)
   

Al(III)

Andaç M et al., Ion-selective imprinted beads for aluminum removal from aqueous solutions.
Industrial & Engineering Chemistry Research, 45, (5), 1780-1786, (2006)
   

Al(III)

Ng SM et al., Fluorescence sensor using a molecularly imprinted polymer as a recognition receptor for the detection of aluminium ions in aqueous media.
Analytical and Bioanalytical Chemistry, 386, (5), 1235-1244, (2006)
   

Al(III)

Khajeh M et al., Imprinted Polymer Particles for Aluminum Uptake: Synthesis and Analytical Applications.
Journal of Macromolecular Science, Part A, 46, (5), 526-532, (2009)
   

Al(III)

Proceeding, Shakerian F et al, Synthesis of new aluminum ion imprinted polymer for solid phase extraction and preconcentration of Al(III) from different matrices, 
(2011)
   

AL(III)

Proceeding, Yazdanian N et al, Synthesis and characterization of Al (III)-ion imprinted polymer as a new sorbent for separation and preconcentration of aluminium, 
(2011)
   

Al(III)

An FQ et al., Selectively removal of Al(III) from Pr(III) and Nd(III) rare earth solution using surface imprinted polymer.
Reactive and Functional Polymers, 73, (1), 60-65, (2013)
   

Al(III)

Ding LL et al., Synthesis and Characteristics of Al(III)-Imprinted Silica Gel Sorbent.
Asian Journal of Chemistry, 25, (14), 7817-7819, (2013)
   

AL(III)

Shakerian F et al., Synthesis of nano-pore size Al(III)-imprinted polymer for the extraction and preconcentration of aluminum ions.
Journal of the Iranian Chemical Society, 10, (4), 669-676, (2013)
   

Al(III)

Venancio PG et al., Optical sensors for corrosion detection in airframes.
Sensors and Actuators B: Chemical, 182, 774-781, (2013)
   

Al(III)

Ara B et al., Synthesis of Ion Imprinted Polymers by Copolymerization of Zn(II) and Al(III)8-hydroxy Quinolone Complexes with Divinylbenzene and Methacryclic Acid.
Polymer-Plastics Technology and Engineering, 55, (14), 1460-1473, (2016)
   

Al(III)

El-Wekil MM et al., Synthesis of Fe3O4 nanobead-functionalized 8-hydroxyquinoline sulfonic acid supported by an ion-imprinted biopolymer as a recognition site for Al3+ ions: estimation in human serum and water samples.
New Journal of Chemistry, 42, (12), 9828-9836, (2018)
   

Al(III)

Özkahraman B, Synthesis of Ion-Imprinted Bioadsorbents Based on Chitosan and its Usage in Al(III) Removal.
Journal of Polymers and the Environment, 26, (3), 1113-1120, (2018)
   

Al(III)

Taheri Z et al., Application of magnetic ion imprinted polymers for simultaneous quantification of Al3+ and Be2+ ions using the mean centering of ratio spectra method.
Talanta, 225, Article122003-(2021)
   

Al(III)-quercetin complex

Liu JM et al., A highly sensitive coupling technique for the determination of trace quercetin based on solid substrate room temperature phosphorimetry and poly (vinyl alcohol) complex imprinting.
Analytica Chimica Acta, 723, (1), 76-82, (2012)
   

a-lipoic acid

Zhu QJ et al., Research progress in anti-oxidative and thermo-sensitive lipoic acid molecularly imprinted polymers.
Journal of Food Safety and Quality, 4, (6), 1785-1789, (2013)
   

2>

Alizarin-Cu(Ac)2

Xu ZF et al., Preparation and Binding Characteristic of An Alizarin-Cu(Ac)2-imprinted Polymer.
Chinese Journal of Applied Chemistry, 23, (8), 826-829, (2006)
   

alizarin red

Fan LL et al., Removal of alizarin red from water environment using magnetic chitosan with Alizarin Red as imprinted molecules.
Colloids and Surfaces B: Biointerfaces, 91, (1), 250-257, (2012)
   

alkali metal ions

Xiao ZL et al., PEO-based electrolytes blended with star polymers with precisely imprinted polymeric pseudo-crown ether cavities for alkali metal ion batteries.
Journal of Membrane Science, 576, 182-189, (2019)
   

alkaline phosphatase

Liu JM et al., A highly selective affinity adsorption imprinting phosphorescence sensor for determination of trace alkaline phosphatase and prediction of human diseases.
Sensors and Actuators B: Chemical, 186, 521-527, (2013)
   

alkaline phosphatase

Bi XD et al., Enzyme Activity Assay of Glycoprotein Enzymes Based on a Boronate Affinity Molecularly Imprinted 96-Well Microplate.
Analytical Chemistry, 86, (24), 12382-12389, (2014)
   

Alkaline phosphatase

Muhammad P et al., Molecularly Imprinted Plasmonic Substrates for Specific and Ultrasensitive Immunoassay of Trace Glycoproteins in Biological Samples.
ACS Applied Materials & Interfaces, 9, (13), 12082-12091, (2017)
   

alkaline phosphatase

Guo AC et al., Boronate affinity controllable oriented surface imprinting of glycans in organic phase using intact glycoproteins as semi-templates.
Chinese Science Bulletin, 64, (13), 1418-1426, (2019)
   

alkaline phosphatase

Li W et al., Controllably Prepared Aptamer-Molecularly Imprinted Polymer Hybrid for High-Specificity and High-Affinity Recognition of Target Proteins.
Analytical Chemistry, 91, (7), 4831-4837, (2019)
   

alkaline phosphatase

Ke CB et al., Fluorometric determination of amifostine and alkaline phosphatase on amphiprotic molecularly imprinted silica crosslinked with binary functional silanes and carbon dots.
Biosensors and Bioelectronics, 151, Article111965-(2020)
   

alkaloids

Yang HP et al., Entrapment of alkaloids within silver: from enantioselective hydrogenation to chiral recognition.
Chemical Communications, 50, (64), 8868-8870, (2014)
   

alkaloids

Tang W et al., Novel controllable hydrophilic thermo-responsive molecularly imprinted resin adsorbent prepared in water for selective recognition of alkaloids by thermal-assisted dispersive solid phase extraction.
Journal of Pharmaceutical and Biomedical Analysis, 160, 386-396, (2018)
   

alkanes

Sekiyama M et al., Molecular shape-selective detection by tin oxide film sensor modified with chemical vapor deposition of molecular-sieving silica overlayer using organic template.
Sensors and Actuators B: Chemical, 124, (2), 398-406, (2007)
   

alkoxy-substituted phenylcarbamic acid

Denderz N et al., Identification of driving forces for the recognition processes on molecularly imprinted polymers.
Nova Biotechnologica et Chimica, 12, (2), 63-69, (2013)
   

alkyl imidazolium ionic liquids

Gao X et al., Molecularly imprinted SPE coupled with HPLC for the selective separation and enrichment of alkyl imidazolium ionic liquids in environmental water samples.
Journal of Separation Science, 36, (19), 3277-3284, (2013)
   

alkyl methylphosphonic acids

Le Moullec S et al., Extraction of alkyl methylphosphonic acids from aqueous samples using a conventional polymeric solid-phase extraction sorbent and a molecularly imprinted polymer.
Journal of Chromatography A, 1139, (2), 171-177, (2007)
   

alkylphenols

Matejicek D et al., The use of molecularly imprinted polymers for the multicomponent determination of endocrine-disrupting compounds in water and sediment.
Journal of Separation Science, 36, (6), 1097-1103, (2013)
   

alkylphenols

Xie XW et al., Novel magnetic multi-templates molecularly imprinted polymer for selective and rapid removal and detection of alkylphenols in water.
Chemical Engineering Journal, 357, 56-65, (2019)
   

1-alkylthymine

Li Z et al., Molecularly imprinted polymeric nanospheres by diblock copolymer self-assembly.
Macromolecules, 39, (7), 2629-2636, (2006)
   

1-alkyluracil

Li Z et al., Molecularly imprinted polymeric nanospheres by diblock copolymer self-assembly.
Macromolecules, 39, (7), 2629-2636, (2006)
   

allantoin

Zhong XW et al., A molecularly imprinted polymer for solid phase extraction of allantoin.
Microchimica Acta, 180, (15-16), 1453-1460, (2013)
   

allergen

Sontimuang C et al., Interdigitated capacitive biosensor based on molecularly imprinted polymer for rapid detection of Hev b1 latex allergen.
Analytical Biochemistry, 410, (2), 224-233, (2011)
   

allocryptopine

Wang L et al., Synthesis and characterization of core-shell magnetic molecularly imprinted polymers for selective extraction of allocryptopine from the wastewater of Macleaya cordata (Willd) R. Br.
Journal of Molecular Recognition, 33, (8), Article_e2844-(2020)
   

allopurinol

Proceeding, Rezaei B et al, Electrochemical allopurinol sensor based on molecular imprinting recognition sites on multiwall carbon nanotube surface, 
(2011)
   

allopurinol

Rezaei B et al., Nanolayer treatment to realize suitable configuration for electrochemical allopurinol sensor based on molecular imprinting recognition sites on multiwall carbon nanotube surface.
Sensors and Actuators B: Chemical, 160, (1), 99-104, (2011)
   

allopurinol

Tabandeh M et al., Computational design and synthesis of molecular imprinted polymers for selective extraction of allopurinol from human plasma.
Journal of Chromatography B, 898, (1), 24-31, (2012)
   

allopurinol

Kim HS et al., Preparation and evaluation of functional allopurinol imprinted starch based biomaterials for transdermal drug delivery.
International Journal of Biological Macromolecules, 175, 217-228, (2021)
   

alloxazine

Robak AJ et al., First example of a molecularly imprinted polymer incorporating a difunctionalized alloxazine flavin isomer.
Tetrahedron Letters, 46, (34), 5651-5654, (2005)
   

all trans-retinoic acid

Nam KH et al., Preparation of molecularly imprinted poly(methacrylic acid) and its HPLC separation characteristics of retinoids.
Polymer-Korea, 26, (6), 710-717, (2002)
   

allyl isothiocyanate

Huang YA et al., Development of an active packaging with molecularly imprinted polymers for beef preservation.
Packaging Technology and Science, 31, (4), 213-220, (2018)
   

ALO

Baeza AN et al., Multiresidue analysis of cephalosporin antibiotics in bovine milk based on molecularly imprinted polymer extraction followed by liquid chromatography-tandem mass spectrometry.
Journal of Chromatography A, 1474, 121-129, (2016)
   

aloe-emodin

Hong YS et al., Extraction of Anthraquinones from Rhubarb by a Molecularly Imprinted-Matrix Solid-Phase Dispersion Method with HPLC Detection.
Analytical Letters, 46, (14), 2235-2252, (2013)
   

aloe emodin

Tian ML et al., Selective solid-phase extraction of aloe emodin from aloe by molecularly imprinted polymers.
Chemical Research in Chinese Universities, 29, (4), 663-666, (2013)
   

aloe emodin

Chen TF et al., Semi-Preparative Scale Separation of Emodin from Plant Extract by Using Molecularly Imprinted Polymer as Stationary Phase.
Chromatographia, 77, (13-14), 893-899, (2014)
   

aloe-emodin

Hao QQ et al., Probe and analogue: Double roles of thionine for aloe-emodin selective and sensitive ratiometric detection.
Sensors and Actuators B: Chemical, 292, 247-253, (2019)
   

aloe-emodin

Wang M et al., Imprinted polymer/Fe3O4 micro-particles decorated multi-layer graphite paper: Electrochemical and colorimetric dual-modal sensing interface for aloe-emodin assay.
Sensors and Actuators B: Chemical, 323, Article128672-(2020)
   

ALP

Tabandeh M et al., Computational design and synthesis of molecular imprinted polymers for selective extraction of allopurinol from human plasma.
Journal of Chromatography B, 898, (1), 24-31, (2012)
   

ALP

Bi XD et al., Enzyme Activity Assay of Glycoprotein Enzymes Based on a Boronate Affinity Molecularly Imprinted 96-Well Microplate.
Analytical Chemistry, 86, (24), 12382-12389, (2014)
   

ALP

Muhammad P et al., Molecularly Imprinted Plasmonic Substrates for Specific and Ultrasensitive Immunoassay of Trace Glycoproteins in Biological Samples.
ACS Applied Materials & Interfaces, 9, (13), 12082-12091, (2017)
   

ALP

Guo AC et al., Boronate affinity controllable oriented surface imprinting of glycans in organic phase using intact glycoproteins as semi-templates.
Chinese Science Bulletin, 64, (13), 1418-1426, (2019)
   

ALP

Li W et al., Controllably Prepared Aptamer-Molecularly Imprinted Polymer Hybrid for High-Specificity and High-Affinity Recognition of Target Proteins.
Analytical Chemistry, 91, (7), 4831-4837, (2019)
   

ALP

Ke CB et al., Fluorometric determination of amifostine and alkaline phosphatase on amphiprotic molecularly imprinted silica crosslinked with binary functional silanes and carbon dots.
Biosensors and Bioelectronics, 151, Article111965-(2020)
   

ALP

Kim HS et al., Preparation and evaluation of functional allopurinol imprinted starch based biomaterials for transdermal drug delivery.
International Journal of Biological Macromolecules, 175, 217-228, (2021)
   

alpha-blocker

Hugon-Chapuis F et al., Selective and automated sample pretreatment by molecularly imprinted polymer for the analysis of the basic drug alfuzosin from plasma.
Journal of Chromatography A, 1196-1197, (1-2), 73-80, (2008)
   

alpha crustacyanin

Saridakis E et al., Protein crystallization facilitated by molecularly imprinted polymers.
Proceedings of the National Academy of Sciences of the United States of America, 108, (27), 11081-11086, (2011)
   

alpha-cypermethrin

Zhao MY et al., Molecularly imprinted polymer silica monolith for the selective extraction of alpha-cypermethrin from soil samples.
Journal of Materials Science, 51, (7), 3440-3447, (2016)
   

alpha-cypermethrin

Hu XL et al., A molecularly imprinted fluorescence nanosensor based on upconversion metal-organic frameworks for alpha-cypermethrin specific recognition.
Microchimica Acta, 187, (11), Article632-(2020)
   

alpha-(2,4-Dichlorophenyl)-1H-imidazole-1-ethanol

Sun XL et al., Preparation and evaluation of dummy-template molecularly imprinted polymer as a potential sorbent for solid phase extraction of imidazole fungicides from river water.
Journal of Chromatography A, 1586, 1-8, (2019)
   

Alpha-(2,4-Dichlorophenyl)-1H-imidazole-1-ethanol

Zhang XX et al., Dummy molecularly imprinted microspheres prepared by Pickering emulsion polymerization for matrix solid-phase dispersion extraction of three azole fungicides from fish samples.
Journal of Chromatography A, 1620, Article461013-(2020)
   

alpha-fetoprotein

Lee MH et al., Extraction of alpha-fetoprotein (AFP) with magnetic albuminoid-imprinted poly(ethylene-co-vinyl alcohol) nanoparticles from human hepatocellular carcinoma HepG2 cellular culture medium.
RSC Advances, 4, (70), 36990-36995, (2014)
   

alpha-fetoprotein

Wang D et al., Simultaneous electrochemical immunoassay using graphene-Au grafted recombinant apoferritin-encoded metallic labels as signal tags and dual-template magnetic molecular imprinted polymer as capture probes.
Biosensors and Bioelectronics, 65, 78-82, (2015)
   

alpha feto protein

Karfa P et al., RETRACTED - A battle between spherical and cube-shaped Ag/AgCl nanoparticle modified imprinted polymer to achieve femtogram detection of alpha-feto protein.
Journal of Materials Chemistry B, 4, (33), 5534-5547, (2016)
   

alpha-fetoprotein

Karfa P et al., RETRACTED A fluorescent molecularly-imprinted polymer gate with temperature and pH as inputs for detection of alpha-fetoprotein.
Biosensors and Bioelectronics, 78, 454-463, (2016)
   

alpha-fetoprotein

Shen XL et al., Molecularly imprinted electrochemical sensor for advanced diagnosis of alpha-fetoprotein.
Analytical Methods, 8, (40), 7361-7368, (2016)
   

alpha feto protein

Karfa P et al., Development of carbon dots modified fluorescent molecular imprinted Polymer@Ag/AgCl nanoparticle for hepatocellular carcinoma marker.
AIP Conference Proceedings, 1832, (1), ArticleNo050008-(2017)
   

alpha-fetoprotein

Mo GC et al., A novel ECL sensor based on a boronate affinity molecular imprinting technique and functionalized SiO2@CQDs/AuNPs/MPBA nanocomposites for sensitive determination of alpha-fetoprotein.
Biosensors and Bioelectronics, 126, 558-564, (2019)
   

alpha-fetoprotein

Sun CH et al., A biomimetic fluorescent nanosensor based on imprinted polymers modified with carbon dots for sensitive detection of alpha-fetoprotein in clinical samples.
Analyst, 144, (22), 6760-6772, (2019)
   

alpha-fetoprotein

Wang ZD et al., A rational route to hybrid aptamer-molecularly imprinted magnetic nanoprobe for recognition of protein biomarkers in human serum.
Analytica Chimica Acta, 1128, 1-10, (2020)
   

alpha-2-macroglobulin

Zhang YD et al., Colorimetric detection of human alpha-2-macroglobulin by janus imprinted nanoparticles constructed dual molecular imprinting immunosandwich strategy.
Analytica Chimica Acta, 1184, Article339039-(2021)
   

Alpra

Proceeding, Sun LZ et al, Synthesis of Nimetazepam - Molecularly Imprinted Polymer and SPE Application, 
In: Advanced Materials Research, Yun J, Zeng DH (Eds.), 200-206, (2013)
   

alprazolam

Proceeding, Sun LZ et al, Synthesis of Nimetazepam - Molecularly Imprinted Polymer and SPE Application, 
In: Advanced Materials Research, Yun J, Zeng DH (Eds.), 200-206, (2013)
   

alprazolam

Abrão LC et al., A new restricted access molecularly imprinted fiber for direct solid phase microextraction of benzodiazepines from plasma samples.
Analyst, 144, (14), 4320-4330, (2019)
   

alprazolam

Tavakoli Z et al., Evaluation of an Experimentally Designed Molecular Imprinted Polyurethane Foam Performance for Extraction of Alprazolam.
Journal of Chromatographic Science, 57, (7), 662-670, (2019)
   

alprazolam

Tavakoli Z et al., Characterization and performance evaluation of functional monomer effect on molecular imprinted polyurethane foam.
Journal of Chromatography A, 1602, 30-40, (2019)
   

alprenolol

Hu XG et al., Preparation and evaluation of propranolol molecularly imprinted solid-phase microextraction fiber for trace analysis of β-blockers in urine and plasma samples.
Journal of Chromatography A, 1216, (2), 190-197, (2009)
   

alternariol

Abou-Hany RAG et al., Tailoring molecularly imprinted polymer beads for alternariol recognition and analysis by a screening with mycotoxin surrogates.
Journal of Chromatography A, 1425, 231-239, (2015)
   

alternariol

Rico-Yuste A et al., Analysis of alternariol and alternariol monomethyl ether in foodstuffs by molecularly imprinted solid-phase extraction and ultra-high-performance liquid chromatography tandem mass spectrometry.
Food Chemistry, 243, 357-364, (2018)
   

alternariol monomethyl ether

Rico-Yuste A et al., Analysis of alternariol and alternariol monomethyl ether in foodstuffs by molecularly imprinted solid-phase extraction and ultra-high-performance liquid chromatography tandem mass spectrometry.
Food Chemistry, 243, 357-364, (2018)
   

alternative template molecule

Xu LH et al., One-pot synthesis of carbon dots-embedded molecularly imprinted polymer for specific recognition of sterigmatocystin in grains.
Biosensors and Bioelectronics, 77, 950-956, (2016)
   

aluminium

Al-Kindy S et al., Fluorimetric monitoring of molecular imprinted polymer recognition events for aluminium.
Analytical Letters, 35, (11), 1763-1774, (2002)
   

aluminium

Al-Kindy SMZ et al., Fluorimetric determination of aluminium using Sequential Injection Analysis (SIA): State of our art and future developments.
Instrumentation Science & Technology, 34, (6), 619-633, (2006)
   

aluminium(III)-morin chelate

Al-Kindy S et al., Fluorimetric monitoring of molecular imprinted polymer recognition events for aluminium.
Analytical Letters, 35, (11), 1763-1774, (2002)
   

aluminium ion

Andaç M et al., Ion-selective imprinted beads for aluminum removal from aqueous solutions.
Industrial & Engineering Chemistry Research, 45, (5), 1780-1786, (2006)
   

Aluminium ion

Ng SM et al., Fluorescence sensor using a molecularly imprinted polymer as a recognition receptor for the detection of aluminium ions in aqueous media.
Analytical and Bioanalytical Chemistry, 386, (5), 1235-1244, (2006)
   

aluminium ion

Proceeding, Shakerian F et al, Synthesis of new aluminum ion imprinted polymer for solid phase extraction and preconcentration of Al(III) from different matrices, 
(2011)
   

aluminium ion

Proceeding, Yazdanian N et al, Synthesis and characterization of Al (III)-ion imprinted polymer as a new sorbent for separation and preconcentration of aluminium, 
(2011)
   

aluminium ion

An FQ et al., Selectively removal of Al(III) from Pr(III) and Nd(III) rare earth solution using surface imprinted polymer.
Reactive and Functional Polymers, 73, (1), 60-65, (2013)
   

Aluminium ion

Ding LL et al., Synthesis and Characteristics of Al(III)-Imprinted Silica Gel Sorbent.
Asian Journal of Chemistry, 25, (14), 7817-7819, (2013)
   

aluminium ion

Shakerian F et al., Synthesis of nano-pore size Al(III)-imprinted polymer for the extraction and preconcentration of aluminum ions.
Journal of the Iranian Chemical Society, 10, (4), 669-676, (2013)
   

Aluminium ion

Ara B et al., Synthesis of Ion Imprinted Polymers by Copolymerization of Zn(II) and Al(III)8-hydroxy Quinolone Complexes with Divinylbenzene and Methacryclic Acid.
Polymer-Plastics Technology and Engineering, 55, (14), 1460-1473, (2016)
   

aluminium ion

Özkahraman B, Synthesis of Ion-Imprinted Bioadsorbents Based on Chitosan and its Usage in Al(III) Removal.
Journal of Polymers and the Environment, 26, (3), 1113-1120, (2018)
   

aluminium ion

Taheri Z et al., Application of magnetic ion imprinted polymers for simultaneous quantification of Al3+ and Be2+ ions using the mean centering of ratio spectra method.
Talanta, 225, Article122003-(2021)
   

aluminium ions

Venancio PG et al., Optical sensors for corrosion detection in airframes.
Sensors and Actuators B: Chemical, 182, 774-781, (2013)
   

aluminium ions

El-Wekil MM et al., Synthesis of Fe3O4 nanobead-functionalized 8-hydroxyquinoline sulfonic acid supported by an ion-imprinted biopolymer as a recognition site for Al3+ ions: estimation in human serum and water samples.
New Journal of Chemistry, 42, (12), 9828-9836, (2018)
   

aluminum

Al-Kindy S et al., Fluorimetric monitoring of molecular imprinted polymer recognition events for aluminium.
Analytical Letters, 35, (11), 1763-1774, (2002)
   

aluminum ion

Khajeh M et al., Imprinted Polymer Particles for Aluminum Uptake: Synthesis and Analytical Applications.
Journal of Macromolecular Science, Part A, 46, (5), 526-532, (2009)
   

aluminum ion

An FQ et al., Selectively removal of Al(III) from Pr(III) and Nd(III) rare earth solution using surface imprinted polymer.
Reactive and Functional Polymers, 73, (1), 60-65, (2013)
   

AM

Chang J et al., Application of molecularly imprinted solid-phase extraction for separating and assaying amphetamines in blood samples.
Chinese Journal of Forensic Medicine, 26, (1), 22-25, (2011)
   

AM

Wang QY et al., An electrochemical sensor based on molecularly imprinted membranes on a P-ATP-AuNP modified electrode for the determination of acrylamide.
Analytical Methods, 6, (16), 6452-6458, (2014)
   

AM

Liu X et al., Electrochemical Sensor based on Imprinted Sol-Gel Polymer on Au NPs-MWCNTs-CS Modified Electrode for the Determination of Acrylamide.
Food Analytical Methods, 9, (1), 114-121, (2016)
   

AM

Liu Y et al., A molecularly imprinted polymer placed on the surface of graphene oxide and doped with Mn(II)-doped ZnS quantum dots for selective fluorometric determination of acrylamide.
Microchimica Acta, 185, (1), ArticleNo48-(2017)
   

AM

Yun YG et al., Molecularly imprinted electrodeposition o-aminothiophenol sensor for selective and sensitive determination of amantadine in animal-derived foods.
Sensors and Actuators B: Chemical, 238, 32-39, (2017)
   

AM

Lian WJ et al., Enzymatic logic calculation systems based on solid-state electrochemiluminescence and molecularly imprinted polymer film electrodes.
Biosensors and Bioelectronics, 100, 326-332, (2018)
   

AM

Yun YG et al., An electrodeposited molecularly imprinted quartz crystal microbalance sensor sensitized with AuNPs and rGO material for highly selective and sensitive detection of amantadine.
RSC Advances, 8, (12), 6600-6607, (2018)
   

AM

Zhao DY et al., Molecularly imprinted photoelectrochemical sensing based on ZnO/polypyrrole nanocomposites for acrylamide detection.
Biosensors and Bioelectronics, 173, Article112816-(2021)
   

Amadori compound

Chuang SW et al., Electrochemical characterisation of a conductive polymer molecularly imprinted with an Amadori compound.
Biosensors and Bioelectronics, 24, (10), 3170-3173, (2009)
   

Amadori compounds

Pan XH et al., Molecularly imprinted mesoporous silica nanoparticles for specific extraction and efficient identification of Amadori compounds.
Analytica Chimica Acta, 1019, 65-73, (2018)
   

amanita toxins

Tan L et al., Highly sensitive determination of amanita toxins in biological samples using β-cyclodextrin collaborated molecularly imprinted polymers coupled with ultra-high performance liquid chromatography tandem mass spectrometry.
Journal of Chromatography A, 1630, Article461514-(2020)
   

α-amanitin

Li YX et al., An artificial receptor fabricated by target recognition determinant imprinting for selective capture of α-amanitin.
Journal of Chromatography A, 1324, 190-197, (2014)
   

α-amanitin

Feng LM et al., Selective fluorescent sensing of α-amanitin in serum using carbon quantum dots-embedded specificity determinant imprinted polymers.
Biosensors and Bioelectronics, 69, 265-271, (2015)
   

α-amanitin

Tan L et al., Fabrication of a biomimetic adsorbent imprinted with a common specificity determinant for the removal of α- and β-amanitin from plasma.
Journal of Chromatography A, 1459, 1-8, (2016)
   

β-amanitin

Tan L et al., Fabrication of a biomimetic adsorbent imprinted with a common specificity determinant for the removal of α- and β-amanitin from plasma.
Journal of Chromatography A, 1459, 1-8, (2016)
   

amanitin

Xu S et al., Preparation of Synthetic Amanitin Epitope Imprinted Polymers via Thiol-ene Click Reaction for Recognition and Extraction α- and β-Amanitins from Mushrooms.
Chromatographia, 82, (9), 1355-1363, (2019)
   

α-amanitin

Xu S et al., Preparation of Synthetic Amanitin Epitope Imprinted Polymers via Thiol-ene Click Reaction for Recognition and Extraction α- and β-Amanitins from Mushrooms.
Chromatographia, 82, (9), 1355-1363, (2019)
   

β-amanitin

Xu S et al., Preparation of Synthetic Amanitin Epitope Imprinted Polymers via Thiol-ene Click Reaction for Recognition and Extraction α- and β-Amanitins from Mushrooms.
Chromatographia, 82, (9), 1355-1363, (2019)
   

α-amanitin

Qiu XZ et al., Highly sensitive α-amanitin sensor based on molecularly imprinted photonic crystals.
Analytica Chimica Acta, 1093, 142-149, (2020)
   

amanitin toxins

Tan L et al., Fabrication of a biomimetic adsorbent imprinted with a common specificity determinant for the removal of α- and β-amanitin from plasma.
Journal of Chromatography A, 1459, 1-8, (2016)
   

amantadine

Lu C et al., Determination of amantadine residues in chicken by molecularly imprinted-liquid chromatography-tandem mass spectrometry.
Journal of Food Safety and Quality, 8, (11), 4169-4173, (2017)
   

amantadine

Yun YG et al., An electrodeposited molecularly imprinted quartz crystal microbalance sensor sensitized with AuNPs and rGO material for highly selective and sensitive detection of amantadine.
RSC Advances, 8, (12), 6600-6607, (2018)
   

amantadine

Zhang T et al., Preparation of a molecularly imprinted polymer based chemiluminescence sensor for the determination of amantadine and rimantadine in meat.
Analytical Methods, 10, (41), 5025-5031, (2018)
   

amantadine

Zhang T et al., Development of a molecularly imprinted microspheres-based microplate fluorescence method for detection of amantadine and rimantadine in chicken.
Food Additives & Contaminants: Part A, 38, (7), 1136-1147, (2021)
   

Amaranth

Luo XB et al., Removal of water-soluble acid dyes from water environment using a novel magnetic molecularly imprinted polymer.
Journal of Hazardous Materials, 187, (1-3), 274-282, (2011)
   

amaranth

Han Q et al., Fe3O4@rGO doped molecularly imprinted polymer membrane based on magnetic field directed self-assembly for the determination of amaranth.
Talanta, 123, 101-108, (2014)
   

amaranth

Long ZR et al., Selective recognition and discrimination of water-soluble azo dyes by a seven-channel molecularly imprinted polymer sensor array.
Journal of Separation Science, 37, (19), 2764-2770, (2014)
   

amaranth

Li LQ et al., A sensitive and selective molecularly imprinted electrochemical sensor based on Pd-Cu bimetallic alloy functionalized graphene for detection of amaranth in soft drink.
Talanta, 197, 68-76, (2019)
   

amaranth

Wu YY et al., Electropolymerization of molecularly imprinted polypyrrole film on multiwalled carbon nanotube surface for highly selective and stable determination of carcinogenic amaranth.
Journal of Electroanalytical Chemistry, 895, Article115494-(2021)
   

AME

Rico-Yuste A et al., Analysis of alternariol and alternariol monomethyl ether in foodstuffs by molecularly imprinted solid-phase extraction and ultra-high-performance liquid chromatography tandem mass spectrometry.
Food Chemistry, 243, 357-364, (2018)
   

amentoflavone

Tian M et al., Preparation of Molecularly Imprinted Polymer for Extracting Flavones from Chamaecyparis Obtusa.
Analytical Letters, 44, (5), 737-746, (2011)
   

amentoflavone

Tian ML et al., Simultaneous Extraction and Separation of Flavonols and Flavones from Chamaecyparis obtusa by Multi-phase Extraction using an Ionic Liquid-modified Microsphere Polymer.
Phytochemical Analysis, 23, (6), 576-581, (2012)
   

amentoflavone

Bi WT et al., Evaluation of molecularly imprinted anion-functionalized poly(ionic liquid)s by multi-phase dispersive extraction of flavonoids from plant.
Journal of Chromatography B, 913-914, 61-68, (2013)
   

americium

Dulanská S et al., Rapid determination of 239,240Pu, 238Pu, 241Am and 90Sr in radioactive waste using combined SPE sorbents AnaLig® Pu02, AnaLig® Sr01 and TRU® Resin.
Journal of Radioanalytical and Nuclear Chemistry, 293, (1), 81-85, (2012)
   

americium

Dulanská S et al., Rapid determination of 239,240Pu, 238Pu, 241Am and 90Sr in high contaminated samples waste using combined SPE sorbents AnaLig® Pu-02, AnaLig® Sr-01 and DGA® Resin.
Journal of Radioanalytical and Nuclear Chemistry, 295, (3), 1635-1639, (2013)
   

americium ion

Morgalyuk VP et al., Novel Template Sorbents for Separation of Americium(III) from Nitric Acid Solutions: Search of Optimal Ion-Imitator of AmIII.
Helvetica Chimica Acta, 97, (12), 1644-1651, (2014)
   

ametryn

Dauwe C et al., Influence of template basicity and hydrophobicity on the molecular recognition properties of molecularly imprinted polymers.
Journal of Chromatography A, 753, (2), 191-200, (1996)
   

ametryn

Lanza F et al., Development of a semiautomated procedure for the synthesis and evaluation of molecularly imprinted polymers applied to the search for functional monomers for phenytoin and nifedipine.
Analytica Chimica Acta, 435, (1), 91-106, (2001)
   

ametryn

Hu XG et al., Development of novel molecularly imprinted solid-phase microextraction fiber and its application for the determination of triazines in complicated samples coupled with high-performance liquid chromatography.
Journal of Chromatography A, 1147, (1), 1-9, (2007)
   

ametryn

Sambe H et al., Molecularly imprinted polymers for triazine herbicides prepared by multi-step swelling and polymerization method: Their application to the determination of methylthiotriazine herbicides in river water.
Journal of Chromatography A, 1152, (1-2), 130-137, (2007)
   

ametryn

Djozan D et al., Preparation of new solid phase micro extraction fiber on the basis of atrazine-molecular imprinted polymer: Application for GC and GC/MS screening of triazine herbicides in water, rice and onion.
Analytica Chimica Acta, 616, (2), 152-159, (2008)
   

ametryn

Djozan D et al., Preparation and binding study of solid-phase microextraction fiber on the basis of ametryn-imprinted polymer: Application to the selective extraction of persistent triazine herbicides in tap water, rice, maize and onion.
Journal of Chromatography A, 1216, (12), 2211-2219, (2009)
   

ametryn

Hu YL et al., Improvement of extraction capability of magnetic molecularly imprinted polymer beads in aqueous media via dual-phase solvent system.
Talanta, 79, (3), 576-582, (2009)
   

ametryn

Koohpaei AR et al., Optimization of solid-phase extraction using developed modern sorbent for trace determination of ametryn in environmental matrices.
Journal of Hazardous Materials, 170, (2-3), 1247-1255, (2009)
   

ametryn

Djozan D et al., Evaluation of a new method for chemical coating of aluminum wire with molecularly imprinted polymer layer. Application for the fabrication of triazines selective solid-phase microextraction fiber.
Analytica Chimica Acta, 674, (1), 40-48, (2010)
   

ametryn

Wu SQ et al., Recognition characteristics of molecularly imprinted microspheres for triazine herbicides using hydrogen-bond array strategy and their analytical applications for corn and soil samples.
Journal of Chromatography A, 1218, (10), 1340-1346, (2011)
   

ametryn

Xu SF et al., Preparation of hollow porous molecularly imprinted polymers and their applications to solid-phase extraction of triazines in soil samples.
Journal of Materials Chemistry, 21, (32), 12047-12053, (2011)
   

ametryn

Ara B et al., Preparation and characterization of uniform molecularly imprinted polymer beads for separation of triazine herbicides.
Journal of Applied Polymer Science, 126, (1), 315-321, (2012)
   

ametryn

Djozan D et al., Inside-Needle Extraction Method Based on Molecularly Imprinted Polymer for Solid-Phase Dynamic Extraction and Preconcentration of Triazine Herbicides Followed by GC-FID Determination.
Chromatographia, 75, (3), 139-148, (2012)
   

ametryn

Wen YY et al., Molecularly imprinted matrix solid-phase dispersion coupled to micellar electrokinetic chromatography for simultaneous determination of triazines in soil, fruit, and vegetable samples.
Electrophoresis, 33, (15), 2454-2463, (2012)
   

ametryn

Zhao N et al., Surface plasmon resonance detection of ametryn using a molecularly imprinted sensing film prepared by surface-initiated atom transfer radical polymerization.
Sensors and Actuators B: Chemical, 166-167, (1), 473-479, (2012)
   

ametryn

Zhong QS et al., Online desorption of molecularly imprinted stir bar sorptive extraction coupled to high performance liquid chromatography for the trace analysis of triazines in rice.
Journal of Separation Science, 35, (23), 3396-3402, (2012)
   

ametryn

Andrade FN et al., Microextraction by packed sorbent liquid chromatography with time-of-flight mass spectrometry of triazines employing a molecularly imprinted polymer.
Journal of Separation Science, 37, (21), 3150-3156, (2014)
   

ametryn

Chen J et al., Hollow-fiber membrane tube embedded with a molecularly imprinted monolithic bar for the microextraction of triazine pesticides.
Analytical Methods, 6, (2), 602-608, (2014)
   

ametryn

Xu SF et al., Double water compatible molecularly imprinted polymers applied as solid-phase extraction sorbent for selective preconcentration and determination of triazines in complicated water samples.
Journal of Chromatography A, 1350, 23-29, (2014)
   

ametryn

Zhao Q et al., Determination triazine pesticides in cereal samples based on single-hole hollow molecularly imprinted microspheres.
Journal of Chromatography A, 1376, 26-34, (2015)
   

ametryn

Andrade FN et al., Development of on-line molecularly imprinted solid phase extraction-liquid chromatography-mass spectrometry for triazine analysis in corn samples.
Analytical Methods, 8, (5), 1181-1186, (2016)
   

ametryn

Andrade FN et al., Determination of trace levels of triazines in corn matrices by bar adsorptive microextraction with a molecularly imprinted polymer.
Journal of Separation Science, 39, (4), 756-761, (2016)
   

ametryn

Zhou TY et al., Determination of triazine herbicides from honey samples based on hydrophilic molecularly imprinted resins followed by high performance liquid chromatography-tandem mass spectrometry.
RSC Advances, 6, (101), 98663-98673, (2016)
   

ametryn

Zhou TY et al., Preparation of magnetic superhydrophilic molecularly imprinted resins for detection of triazines in aqueous samples.
Journal of Chromatography A, 1497, 38-46, (2017)
   

ametryn

Khan S et al., Synthesis and characterization of magnetic-molecularly imprinted polymers for the HPLC-UV analysis of ametryn.
Reactive and Functional Polymers, 122, 175-182, (2018)
   

AMF

Ke CB et al., Fluorometric determination of amifostine and alkaline phosphatase on amphiprotic molecularly imprinted silica crosslinked with binary functional silanes and carbon dots.
Biosensors and Bioelectronics, 151, Article111965-(2020)
   

AMI

Freitas MB et al., Amitriptyline and Nortriptyline in Plasma: Solid-Phase Extraction in Molecularly Imprinted Polymers and Silica Octadecil for High Performance Liquid Chromatography Analysis.
Latin American Journal of Pharmacy, 28, (1), 70-79, (2009)
   

AMI

He MQ et al., Synthesis and characterization of molecularly imprinted polymers for aminotriazole.
Ion Exchange and Adsorption, 29, (2), 131-139, (2013)
   

amifostine

Ke CB et al., Fluorometric determination of amifostine and alkaline phosphatase on amphiprotic molecularly imprinted silica crosslinked with binary functional silanes and carbon dots.
Biosensors and Bioelectronics, 151, Article111965-(2020)
   

AM(III)

Morgalyuk VP et al., Novel Template Sorbents for Separation of Americium(III) from Nitric Acid Solutions: Search of Optimal Ion-Imitator of AmIII.
Helvetica Chimica Acta, 97, (12), 1644-1651, (2014)
   

AMIK

Yola ML et al., Determination of amikacin in human plasma by molecular imprinted SPR nanosensor.
Sensors and Actuators B: Chemical, 198, 70-76, (2014)
   

amikacin

Yola ML et al., Determination of amikacin in human plasma by molecular imprinted SPR nanosensor.
Sensors and Actuators B: Chemical, 198, 70-76, (2014)
   

amikacin

Bajpai SK et al., Selective Removal of Amikacin From Simulated Polluted Water Using Molecularly Imprinting Polymer (MIP).
Journal of Macromolecular Science, Part A, 52, (11), 901-911, (2015)
   

amikacin

Bajpai SK et al., Selective removal of amikacin from simulated polluted water using molecularly imprinting polymer: A column study.
Journal of Macromolecular Science, Part A, 53, (9), 579-584, (2016)
   

amikacin

Yang BX et al., Simultaneous Determination of 11 Aminoglycoside Residues in Honey, Milk, and Pork by Liquid Chromatography with Tandem Mass Spectrometry and Molecularly Imprinted Polymer Solid Phase Extraction.
Journal of AOAC International, 100, (6), 1869-1878, (2017)
   

amikacin

Hassanzadeh J et al., Specific fluorometric assay for direct determination of amikacin by molecularly imprinting polymer on high fluorescent g-C3N4 quantum dots.
Spectrochimica Acta Part A-Molecular and Biomolecular Spctroscopy, 214, 451-458, (2019)
   

amiloride hydrochloride

de B.Peçanha BR et al., Molecularly imprinted polymers prepared by precipitation polymerization and their application to solid phase extraction (Polímeros de Impressão Molecular Obtidos Através de Polimerização por Precipitação e sua Aplicação na Técnica de Extração em Fase Sólida).
Polimeros, 23, (4), 509-513, (2013)
   

amines

Gräfe A et al., Optical sensor materials for the detection of amines in organic solvents.
Analytica Chimica Acta, 565, (1), 42-47, (2006)
   

2-aminoacetic acid

Sangiorgi N et al., Molecularly imprinted polypyrrole counter electrode for gel-state dye-sensitized solar cells.
Electrochimica Acta, 305, 322-328, (2019)
   

amino acid block-copolymers

Paik P et al., Synthesis of amino acid block-copolymer imprinted chiral mesoporous silica and its acoustically-induced optical Kerr effects.
Journal of Solid State Chemistry, 192, 127-131, (2012)
   

amino acids

Kong Y et al., Enantioselective recognition of amino acids based on molecularly imprinted polyaniline electrode column.
Electrochimica Acta, 56, (11), 4070-4074, (2011)
   

amino acids

Chai ZY et al., Thermochemical study of amino acid imprinted polymer films.
Journal of Molecular Recognition, 28, (11), 651-655, (2015)
   

amino acids

Zhu FL et al., Preparation of molecularly imprinted polymers using theanine as dummy template and its application as SPE sorbent for the determination of eighteen amino acids in tobacco.
Talanta, 150, 388-398, (2016)
   

amino acids

Zhang LJ et al., Chirality detection of amino acid enantiomers by organic electrochemical transistor.
Biosensors and Bioelectronics, 105, 121-128, (2018)
   

1-aminoadamantane

Burri E et al., Site-isolated porphyrin catalysts in imprinted polymers.
Chemistry - A European Journal, 11, (17), 5055-5061, (2005)
   

2-aminoadipic acid

Anirudhan TS et al., Molecularly imprinted electrochemical sensing platform for 2-Aminoadipic acid, a diabetes biomarker.
Reactive and Functional Polymers, 168, Article105056-(2021)
   

aminoantipyrine

Fan ZL et al., Investigation of Molecularly Imprinted Polymer Rod with Aminoantipyrine as Template by In-situ Polymerization Method and Their Separation Characteristics.
Chinese Journal of Chromatography, 21, (3), 199-201, (2003)
   

aminoantipyrine

Fan ZL et al., Aminoantipyrine imprinted column prepared by in-situ polymerization and investigation of binding character in aqueous medium.
Acta Chimica Sinica, 62, (12), 1176-1179, (2004)
   

aminoantipyrine

Yarman A et al., Cytochrome c-Derived Hybrid Systems Based on Moleculary Imprinted Polymers.
Electroanalysis, 27, (3), 573-586, (2015)
   

4-aminoazobenzene

Zhang YH et al., Adsorptive characterization of the 4-aminoazobenzene imprinted polymer and its application in detection of trace substance.
Chinese Journal of Analysis Laboratory, 29, (4), 103-106, (2010)
   

4-aminoazobenzene

Ma MM et al., Interfacial potentiometry with double poles sensor based on molecularly imprinted polymer for monitoring of 4-aminoazobenzene.
International Journal of Environmental Analytical Chemistry, 97, (3), 289-300, (2017)
   

2-aminobenzimidazole

Nezhadali A et al., Computer-assisted sensor design and analysis of 2-aminobenzimidazole in biological model samples based on electropolymerized-molecularly imprinted polypyrrole modified pencil graphite electrode.
Sensors and Actuators B: Chemical, 185, 17-23, (2013)
   

(+)-6-aminobenzylpenicillin sodium salt

Diaz-Faes Lopez T et al., Controlled Release of Nafcillin Using Biocompatible "Dummy" Molecularly Imprinted Sol-Gel Nanospheres.
Current Topics in Medicinal Chemistry, 15, (3), 262-270, (2015)
   

(4-Aminobenzyl)-phosphoramidic acid-4-nitrophenylester

Lettau K et al., A Bifunctional Molecularly Imprinted Polymer (MIP): Analysis of Binding and Catalysis by a Thermistor.
Angewandte Chemie International Edition, 45, (42), 6986-6990, (2006)
   

amino biotin

Izenberg NR et al., Astrobiological molecularly imprinted polymer sensors.
Planetary and Space Science, 57, (7), 846-853, (2009)
   

3-aminobiphenyl

Du YF et al., Selective Solid Phase Extraction of Aromatic Amines in Mainstream Tobacco Smoke Solution Using Molecularly Imprinted Polymer.
Asian Journal of Chemistry, 24, (3), 1175-1178, (2012)
   

4-aminobiphenyl

Du YF et al., Selective Solid Phase Extraction of Aromatic Amines in Mainstream Tobacco Smoke Solution Using Molecularly Imprinted Polymer.
Asian Journal of Chemistry, 24, (3), 1175-1178, (2012)
   

3-aminobiphenyl

Yu JJ et al., Determination of urinary aromatic amines in smokers and nonsmokers using a MIPs-SPE coupled with LC-MS/MS method.
Journal of Chromatography B, 958, 130-135, (2014)
   

4-aminobiphenyl

Yu JJ et al., Determination of urinary aromatic amines in smokers and nonsmokers using a MIPs-SPE coupled with LC-MS/MS method.
Journal of Chromatography B, 958, 130-135, (2014)
   

4-aminobiphenyl

Shi T et al., Application of up-conversion molecularly imprinted nanoprobe for selective recognition and straightforward detection of 4-aminobiphenyl.
Spectrochimica Acta Part A-Molecular and Biomolecular Spctroscopy, 265, Article120405-(2022)
   

4-aminobutyric acid

Zheng XY et al., Electrochemical sensor of 4-aminobutyric acid based on molecularly imprinted electropolymer.
Analytical Methods, 4, (2), 482-487, (2012)
   

γ-amino butyric acid

Prasad BB et al., Highly selective and sensitive analysis of γ-aminobutyric acid using a new molecularly imprinted polymer modified at the surface of abrasively immobilized multi-walled carbon nanotubes on pencil graphite electrode.
Electrochimica Acta, 102, 400-408, (2013)
   

7-aminocephalosporanic acid

Wang XY et al., Detection of cephalosporins residue in chicken muscles by molecular imprinted solid phase extraction-high performance capillary electrophoresis (MISPE-HPCE).
Jiangsu Journal of Agricultural Sciences, 28, (1), 193-197, (2012)
   

2-amino-5-chlorobenzophenone

Machicote RG et al., A molecular imprinted polymer as a flow-through optical sensor for oxazepam.
Journal of Analytical Methods in Chemistry, ArticleNo6302609-(2018)
   

2-amino-4-chlorophenol

Yin YL et al., Magnetic Molecularly Imprinted Polymer Preconcentration of 4-Chlorophenol with Determination by High-Performance Liquid Chromatography.
Analytical Letters, 50, (1), 117-134, (2017)
   

5-Amino-2-chloropyridine

Kecili R et al., Fast identification of selective resins for removal of genotoxic aminopyridine impurities via screening of molecularly imprinted polymer libraries.
Journal of Chromatography A, 1339, 65-72, (2014)
   

5-amino-2-chloropyridine

Sümbelli Y et al., Molecularly imprinted polymer embedded-cryogels as selective genotoxic impurity scavengers.
Separation Science and Technology, 56, (18), 3066-3078, (2021)
   

aminodiphenylmethane

Burri E et al., Molecular imprinting with ruthenium porphyrin catalysts.
Chimia, 60, (4), 182-184, (2006)
   

4-(2-Aminoethyl)aniline

Lulinski P et al., Synthesis and characterization of 4-(2-aminoethyl)aniline imprinted polymer as a highly effective sorbent of dopamine.
Talanta, 119, 623-631, (2014)
   

7-aminoflunitrazepam

Ariffin MM et al., Molecularly Imprinted Solid-Phase Extraction of Diazepam and Its Metabolites from Hair Samples.
Analytical Chemistry, 79, (1), 256-262, (2007)
   

aminoglutethimide

Kadhirvel P et al., Recognitive nano-thin-film composite beads for the enantiomeric resolution of the metastatic breast cancer drug aminoglutethimide.
Journal of Chromatography A, 1358, 93-101, (2014)
   

aminoglutethimide

Lai JP et al., Molecularly imprinted microspheres for the anticancer drug aminoglutethimide: Synthesis, characterization, and solid-phase extraction applications in human urine samples.
Journal of Separation Science, 37, (9-10), 1170-1176, (2014)
   

aminoglutethimide

Kadhirvel P et al., Aminoglutethimide-imprinted xerogels in bulk and spherical formats, based on a multifunctional organo-alkoxysilane precursor.
Journal of Chromatography A, 1424, 59-68, (2015)
   

aminoglutethimide

Tang L et al., Macromolecular crowding of molecular imprinting: A facile pathway to produce drug delivery devices for zero-order sustained release.
International Journal of Pharmaceutics, 496, (2), 822-833, (2015)
   

aminoglycoside

Toloza CAT et al., Kanamycin detection at graphene quantum dot-decorated gold nanoparticles in organized medium after solid-phase extraction using an aminoglycoside imprinted polymer.
MethodsX, 5, 1605-1612, (2018)
   

aminoglycoside antibiotic

Ji SL et al., Synthesis of molecularly imprinted polymer sorbents and application for the determination of aminoglycosides antibiotics in honey.
Journal of Chromatography A, 1313, 113-118, (2013)
   

aminoglycoside antibiotics

Yang BX et al., Simultaneous Determination of 11 Aminoglycoside Residues in Honey, Milk, and Pork by Liquid Chromatography with Tandem Mass Spectrometry and Molecularly Imprinted Polymer Solid Phase Extraction.
Journal of AOAC International, 100, (6), 1869-1878, (2017)
   

aminoglycoside antibiotics

Zhang Z et al., Synthesis of dummy-template molecularly imprinted polymer adsorbents for solid phase extraction of aminoglycosides antibiotics from environmental water samples.
Talanta, 208, Article120385-(2020)
   

aminoglycoside antibiotics

Cao XL et al., Preparation of Magnetic Dummy Template Molecularly Imprinted Polymers for the Determination of Aminoglycosides Antibiotics in Milk.
Food Analytical Methods, 14, (10), 2111-2120, (2021)
   

aminoglycosides

Moreno-González D et al., Determination of aminoglycosides in honey by capillary electrophoresis tandem mass spectrometry and extraction with molecularly imprinted polymers.
Analytica Chimica Acta, 891, 321-328, (2015)
   

aminoglycosides

Moreno-González D et al., Evaluation of hydrophilic interaction liquid chromatography-tandem mass spectrometry and extraction with molecularly imprinted polymers for determination of aminoglycosides in milk and milk-based functional foods.
Talanta, 171, 74-80, (2017)
   

aminoglycosides

Savoy MC et al., Determination of 14 aminoglycosides by LC-MS/MS using molecularly imprinted polymer solid phase extraction for clean-up.
Food Additives & Contaminants: Part A, 35, (4), 674-685, (2018)
   

4-Aminohippuric acid

Feng F et al., A novel quartz crystal microbalance sensor array based on molecular imprinted polymers for simultaneous detection of clenbuterol and its metabolites.
Talanta, 167, 94-102, (2017)
   

1-aminohydantoin

Pei H et al., Study on preparation and property of molecularly imprinted polymer of 1-aminohydantoin.
Chemical Research and Application, 22, (2), 161-164, (2010)
   

α-aminohydrocinnamic acid salt

Li J et al., Preparation of molecularly imprinted polymers using ion-pair dummy template imprinting and polymerizable ionic liquids.
RSC Advances, 5, (77), 62697-62705, (2015)
   

2-amino-4-methoxy-6-methyl-1,3,5-triazine

Chen J et al., Hollow-fiber membrane tube embedded with a molecularly imprinted monolithic bar for the microextraction of triazine pesticides.
Analytical Methods, 6, (2), 602-608, (2014)
   

2-amino-1-methyl-6-phenylimidazo[4,5-b]pyridine

Frandsen H, Biomonitoring of urinary metabolites of 2-amino-1-methyl-6-phenylimidazo[4,5-b]pyridine (PhIP) following human consumption of cooked chicken.
Food and Chemical Toxicology, 46, (9), 3200-3205, (2008)
   

aminomethylphosphonic acid

Kittlaus S et al., New Approaches for Determination of Glyphosate and Aminomethylphosphonic Acid from Different Tea Samples-Prospects and Limits of Cleanup with Molecularly Imprinted Polymer and Titanium Dioxide.
Journal of AOAC International, 92, (3), 703-714, (2009)
   

aminomethylphosphonic acid

da Mata K et al., Synthesis and characterization of cross-linked molecularly imprinted polyacrylamide for the extraction/preconcentration of glyphosate and aminomethylphosphonic acid from water samples.
Reactive and Functional Polymers, 83, 76-83, (2014)
   

aminomethylphosphonic acid

Berho C et al., Laboratory calibration of a POCIS-like sampler based on molecularly imprinted polymers for glyphosate and AMPA sampling in water.
Analytical and Bioanalytical Chemistry, 409, (8), 2029-2035, (2017)
   

aminomethylphosphonic acid

Claude B et al., Preliminary recovery study of a commercial molecularly imprinted polymer for the extraction of glyphosate and AMPA in different environmental waters using MS.
Environmental Science and Pollution Research, 24, (13), 12293-12300, (2017)
   

aminomethylphosphonic acid

Surapong N et al., Magnetic Molecularly Imprinted Polymer for the Selective Enrichment of Glyphosate, Glufosinate, and Aminomethylphosphonic Acid Prior to High-Performance Liquid Chromatography.
ACS Omega, 6, (41), 27007-27016, (2021)
   

5-Amino-2-methylpyridine

Kecili R et al., Fast identification of selective resins for removal of genotoxic aminopyridine impurities via screening of molecularly imprinted polymer libraries.
Journal of Chromatography A, 1339, 65-72, (2014)
   

5-Amino-1-naphthalenesulfonic acid

Hashemi SH et al., Spectrophotometric determination of four naphthalene sulfonates in seawater after their molecularly imprinted stir bar sorptive extraction.
Journal of the Chilean Chemical Society, 63, (3), 4057-4063, (2018)
   

2-amino-4-nitrophenol

Wang X et al., Preparation of magnetic imprinted polymer particles via microwave heating initiated polymerization for selective enrichment of 2-amino-4-nitrophenol from aqueous solution.
Chemical Engineering Journal, 178, (1), 85-92, (2011)
   

4-amino-3-p-chlorophenylbutyric acid

Tarannum N et al., Water-compatible surface imprinting of ’baclofen’ on silica surface for selective recognition and detection in aqueous solution.
Analytical Methods, 4, (9), 3019-3026, (2012)
   

6-aminopenicillanic acid

Giovannoli C et al., Solid phase extraction of penicillins from milk by using sacrificial silica beads as a support for a molecular imprint.
Microchimica Acta, 180, (15-16), 1371-1377, (2013)
   

6-aminopenicillanic acid

Giovannoli C et al., Comparison of binding behavior for molecularly imprinted polymers prepared by hierarchical imprinting or Pickering emulsion polymerization.
Journal of Separation Science, 38, (20), 3661-3668, (2015)
   

6-aminopenicillanic acid

Wang P et al., Application of 6-APA molecular imprinted solid-phase extraction column in the detection of penicillins in milk.
Food and Fermentation Industries, 42, (4), 183-188, (2016)
   

(+)-6-aminopenicillenic acid

Diaz-Faes Lopez T et al., Controlled Release of Nafcillin Using Biocompatible "Dummy" Molecularly Imprinted Sol-Gel Nanospheres.
Current Topics in Medicinal Chemistry, 15, (3), 262-270, (2015)
   

4-aminophenol

Santos W et al., A catalytically active molecularly imprinted polymer that mimics peroxidase based on hemin: application to the determination of p-aminophenol.
Analytical and Bioanalytical Chemistry, 389, (6), 1919-1929, (2007)
   

4-aminophenol

Santos WJR et al., Synthesis, Characterization and Kinetics of Catalytically Active Molecularly Imprinted Polymers for the Selective Recognition of 4-Aminophenol.
Journal of the Brazilian Chemical Society, 20, (5), 820-825, (2009)
   

4-aminophenol

Neto JdRM et al., A hemin-based molecularly imprinted polymer (MIP) grafted onto a glassy carbon electrode as a selective sensor for 4-aminophenol amperometric.
Sensors and Actuators B: Chemical, 152, (2), 220-225, (2011)
   

4-aminophenol

Baykara E et al., Synthesis of monolithic HPLC stationary phase with self-assembled molecular recognition sites for 4-aminophenol.
Journal of Applied Polymer Science, 123, (1), 493-501, (2012)
   

2-aminophenol

Luo RX et al., Preparation of Molecularly Imprinted Polymer and its Recognition Property for O-Aminophenol.
Science Technology and Engineering, 12, (34), 9243-9246, (2012)
   

4-aminophenol

Wang R et al., A highly sensitive photoelectrochemical sensor for 4-aminophenol based on CdS-graphene nanocomposites and molecularly imprinted polypyrrole.
Electrochimica Acta, 121, 102-108, (2014)
   

2-aminopurine

Book chapter, Li SJet al., ’ON/OFF’-switched molecular recognition by a smart aminopurine-imprinted polymer, 
In: Molecular Recognition: Biotechnology, Chemical Engineering and Materials Applications, McEvoy JA (Ed.) Nova Science Publishers, Inc.: New York, 283-296, (2011)
   

aminopurine

Book chapter, Li SJet al., ’On/Off’-Switched Molecular Recognition by a Smart Aminopurine-Imprinted Polymer, 
In: Smart Polymer Materials for Biomedical Applications, Li SJ, Tiwari A, Prabaharan M, Aryal S (Eds.) Nova Science Publishers Inc.: New York, 57-72, (2011)
   

aminopyralid

He YH et al., Magnetic molecularly imprinted polymers for the detection of aminopyralid in milk using dispersive solid-phase extraction.
RSC Advances, 9, (51), 29998-30006, (2019)
   

aminopyralid

Tan SJ et al., A dummy molecularly imprinted solid-phase extraction coupled with liquid chromatography-tandem mass spectrometry for selective determination of four pyridine carboxylic acid herbicides in milk.
Journal of Chromatography B, 1108, 65-72, (2019)
   

1-aminopyrene

Nadali A et al., Synthesize and application of magnetic molecularly imprinted polymers (mag-MIPs) to extract 1-Aminopyrene from the human urine sample.
Journal of Environmental Chemical Engineering, 9, (5), Article106253-(2021)
   

4-aminopyridine

Guo HS et al., Studies on the binding nature in molecularly imprinted polymer selective for 4-aminopyridine.
Chemical Journal of Chinese Universities, 22, (5), 739-743, (2001)
   

4-aminopyridine

Guo HS et al., Synthesis of molecularly imprinted microspheres polymer with 4-aminopyridine as template and the study of their binding characteristics.
Chemical Journal of Chinese Universities, 22, (3), 371-375, (2001)
   

4-aminopyridine

Lai JP et al., Preparation and evaluation of molecularly imprinted polymeric microspheres by aqueous suspension polymerization for use as a high-performance liquid chromatography stationary phase.
Analytica Chimica Acta, 442, (1), 105-111, (2001)
   

4-aminopyridine

Lai JP et al., Study on recognition mechanism of molecularly imprinted microsphere synthesized from aqueous solution.
Acta Chimica Sinica, 60, (2), 322-327, (2002)
   

4-aminopyridine

Yan WY et al., The recognition mechanism of 4-aminopyridine molecularly imprinted polymer-based monolithic capillary column in electrochromatography.
Chinese Journal of Analysis Laboratory, 22, (2), 5-7, (2003)
   

4-aminopyridine

Yan WY et al., Preparation of 4-aminopyridine imprinted polymer-based monolithic capillary column and evaluation of electrochromatography.
Chemical Journal of Chinese Universities, 24, (6), 1026-1030, (2003)
   

2-aminopyridine

Cummins W et al., A comparative study of the potential of acrylic and sol-gel polymers for molecular imprinting.
Analytica Chimica Acta, 542, (1), 52-60, (2005)
   

2-aminopyridine

Cummins W et al., Systematic cross-selectivity study of the factors influencing template receptor interactions in molecularly imprinted nitrogen heterocycles.
Biosensors and Bioelectronics, 22, (3), 372-380, (2006)
   

3-aminopyridine

Cummins W et al., Systematic cross-selectivity study of the factors influencing template receptor interactions in molecularly imprinted nitrogen heterocycles.
Biosensors and Bioelectronics, 22, (3), 372-380, (2006)
   

4-aminopyridine

Cummins W et al., Systematic cross-selectivity study of the factors influencing template receptor interactions in molecularly imprinted nitrogen heterocycles.
Biosensors and Bioelectronics, 22, (3), 372-380, (2006)
   

2-aminopyridine

Zhao BH et al., Preparation and selective permeation of molecularly imprinted membranes with supporting polytetrafluoroethylene filter.
Chinese Journal of Analytical Chemistry, 34, (7), 1003-1006, (2006)
   

2-aminopyridine

Cummins W et al., Thermal desorption characterisation of molecularly imprinted polymers. Part I: a novel study using direct-probe GC-MS analysis.
Analytical and Bioanalytical Chemistry, 391, (4), 1237-1244, (2008)
   

2-aminopyridine

Holland N et al., Thermal desorption characterisation of molecularly imprinted polymers. Part II: Use of direct probe GC-MS analysis to study crosslinking effects.
Analytical and Bioanalytical Chemistry, 391, (4), 1245-1253, (2008)
   

2-aminopyridine

Osmani Q et al., The use of FTIR and NMR spectroscopies to study prepolymerisation interactions in nitrogen heterocycles.
Analytical and Bioanalytical Chemistry, 391, (4), 1229-1236, (2008)
   

4-aminopyridine

Wang LM et al., Study on Synthesis and Application of Seeds in Molecularly Imprinting Polymeric Microspheres.
China Plastics, (2), 42-46, (2008)
   

2-aminopyridine

Holland N et al., The influence of polymer morphology on the performance of molecularly imprinted polymers.
Polymer, 51, (7), 1578-1584, (2010)
   

4-aminopyridine

Liu XY et al., Investigation of selective molecular interactions using two-dimensional Fourier transform IR spectroscopy.
Analytical and Bioanalytical Chemistry, 397, (1), 339-343, (2010)
   

4-amino pyridine

Liu XY et al., Recognition ability of temperature responsive molecularly imprinted polymer hydrogels.
Soft Matter, 7, (5), 1986-1993, (2011)
   

2-aminopyridine

Najafi M et al., Molecularly imprinted polymer-based potentiometric sensor for 2-aminopyridine as a potential impurity in piroxicam.
Drug Testing and Analysis, 3, (2), 132-137, (2011)
   

2-Aminopyridine

Kecili R et al., Fast identification of selective resins for removal of genotoxic aminopyridine impurities via screening of molecularly imprinted polymer libraries.
Journal of Chromatography A, 1339, 65-72, (2014)
   

3-Aminopyridine

Kecili R et al., Fast identification of selective resins for removal of genotoxic aminopyridine impurities via screening of molecularly imprinted polymer libraries.
Journal of Chromatography A, 1339, 65-72, (2014)
   

4-Aminopyridine

Kecili R et al., Fast identification of selective resins for removal of genotoxic aminopyridine impurities via screening of molecularly imprinted polymer libraries.
Journal of Chromatography A, 1339, 65-72, (2014)
   

3-aminopyridine

Kadhirvel P et al., Molecular imprinting in hydrogels using reversible addition-fragmentation chain transfer polymerization and continuous flow micro-reactor.
Journal of Chemical Technology & Biotechnology, 90, (9), 1552-1564, (2015)
   

2-aminopyridine

Zhang W et al., Selective Removal of the Genotoxic Compound 2-Aminopyridine in Water using Molecularly Imprinted Polymers Based on Magnetic Chitosan and β-Cyclodextrin.
International Journal of Environmental Research and Public Health, 14, (9), ArticleNo991-(2017)
   

4-aminopyridine

Fallah-Darrehchi M et al., Conductive conduit based on electrospun poly (l-lactide-co-D, l-lactide) nanofibers containing 4-aminopyridine-loaded molecularly imprinted poly (methacrylic acid) nanoparticles used for peripheral nerve regeneration.
International Journal of Biological Macromolecules, 190, 499-507, (2021)
   

2-aminopyridine

Sümbelli Y et al., Molecularly imprinted polymer embedded-cryogels as selective genotoxic impurity scavengers.
Separation Science and Technology, 56, (18), 3066-3078, (2021)
   

aminopyridines

Kecili R et al., Fast identification of selective resins for removal of genotoxic aminopyridine impurities via screening of molecularly imprinted polymer libraries.
Journal of Chromatography A, 1339, 65-72, (2014)
   

2-aminopyrimidine

Székely G et al., Molecularly imprinted organic solvent nanofiltration membranes - Revealing molecular recognition and solute rejection behaviour.
Reactive and Functional Polymers, 86, 215-224, (2015)
   

aminopyrine

Zhang GQ et al., In-situ polymerization of aminopyrine imprinted column and investigation of binding character in aqueous medium.
Chinese Journal of Analytical Chemistry, 33, (10), 1393-1396, (2005)
   

aminopyrine

Yarman A et al., Coupling Biocatalysis with Molecular Imprinting in a Biomimetic Sensor.
Angewandte Chemie International Edition, 52, (44), 11521-11525, (2013)
   

2-aminoquinoline

Zhang TL et al., Evaluation of aminoquinoline-imprinted polymers and the recognition mechanism.
Journal of Applied Polymer Science, 129, (6), 3447-3453, (2013)
   

3-aminoquinoline

Zhang TL et al., Evaluation of aminoquinoline-imprinted polymers and the recognition mechanism.
Journal of Applied Polymer Science, 129, (6), 3447-3453, (2013)
   

8-aminoquinoline

Zhang TL et al., Evaluation of aminoquinoline-imprinted polymers and the recognition mechanism.
Journal of Applied Polymer Science, 129, (6), 3447-3453, (2013)
   

5-aminosalicylic acid

Ulubayram K et al., Molecularly imprinted acrylic-based microspheres for colonic delivery of 5-aminosalicylic acid.
Journal of Optoelectronics and Advanced Materials, 9, (11), 3479-3483, (2007)
   

5-aminosalicylic acid

Ulubayram K et al., Molecularly imprinted acrylic-based microspheres for colonic delivery of 5-aminosalicylic acid.
Optoelectronics And Advanced Materials-Rapid Communications, 1, (6), 312-316, (2007)
   

aminotadalafil

Chen FF et al., Magnetic molecularly imprinted polymer for the selective extraction of sildenafil, vardenafil and their analogs from herbal medicines.
Talanta, 115, 482-489, (2013)
   

2-aminothiazoline-4-carboxylic acid

Jackson R et al., Molecularly imprinted polymer stir bar sorption extraction and electrospray ionization tandem mass spectrometry for determination of 2-aminothiazoline-4-carboxylic acid as a marker for cyanide exposure in forensic urine analysis.
Analytical Methods, 2, (5), 552-557, (2010)
   

2-aminothiazoline-4-carboxylic acid

Petrikovics I et al., Determining the biomarker cyanide metabolite 2-aminothiazoline-4-carboxylic acid in mice liver after cyanide exposure.
Toxicology Letters, 196, (Supplement 1), S295-S296, (2010)
   

2-aminothiazoline-4-carboxylic acid

Petrikovics I et al., Plasma persistence of 2-aminothiazoline-4-carboxylic acid in rat system determined by liquid chromatography tandem mass spectrometry.
Journal of Chromatography B, 891-892, (1), 81-84, (2012)
   

2-aminothiazoline-4-carboxylic acid

Lulinski P et al., A highly selective molecularly imprinted sorbent for extraction of 2-aminothiazoline-4-carboxylic acid - Synthesis, characterization and application in post-mortem whole blood analysis.
Journal of Chromatography A, 1420, 16-25, (2015)
   

aminotriazole

He MQ et al., Synthesis and characterization of molecularly imprinted polymers for aminotriazole.
Ion Exchange and Adsorption, 29, (2), 131-139, (2013)
   

aminotriazole

Liu GY et al., Extremely Sensitive Molecularly Imprinted ECL Sensor with Multiple Probes Released from Liposomes Immobilized by a Light-Triggered Click Reaction.
ACS Sensors, 6, (11), 4185-4192, (2021)
   

2-amino-3,7,8-trichlorodibenzodioxin

Malitesta C et al., Synthesis of a Molecularly Imprinted Polymer for Dioxin.
Sensors, 6, (8), 915-924, (2006)
   

2-amino-3,7,8-trimethyl-3H-imidazo[4,5-f]quinoxaline

Ayerdurai V et al., Selective Impedimetric Chemosensing of Carcinogenic Heterocyclic Aromatic Amine in Pork by dsDNA-Mimicking Molecularly Imprinted Polymer Film-Coated Electrodes.
Journal of Agricultural and Food Chemistry, 69, (48), 14689-14698, (2021)
   

Amiodarone

Muhammad T et al., Preparation of molecular imprinted polymer fluorescence sensing membrane and its application to the determination of amiodarone.
Chinese Journal of Analytical Chemistry, 35, (7), 1059-1062, (2007)
   

amiodarone

Muhammad T et al., Rational design and synthesis of water-compatible molecularly imprinted polymers for selective solid phase extraction of amiodarone.
Analytica Chimica Acta, 709, (1), 98-104, (2012)
   

amitriptyline

Freitas MB et al., Amitriptyline and Nortriptyline in Plasma: Solid-Phase Extraction in Molecularly Imprinted Polymers and Silica Octadecil for High Performance Liquid Chromatography Analysis.
Latin American Journal of Pharmacy, 28, (1), 70-79, (2009)
   

amitriptyline

Khanahmadzadeh S et al., Ultrasound-assisted combined with nano-sized molecularly imprinted polymer for selective extraction and pre-concentration of amitriptyline in human plasma with gas chromatography-flame detection.
Journal of Chromatography B, 972, 6-13, (2014)
   

amitriptyline

Khanahmadzadeh S et al., Nano-sized Amitriptyline (AT) imprinted polymer particles: Synthesis and characterization in Silicon oil.
International Journal of Nano Dimension, 8, (2), 182-186, (2017)
   

amitriptyline

Santos MG et al., Analysis of tricyclic antidepressants in human plasma using online-restricted access molecularly imprinted solid phase extraction followed by direct mass spectrometry identification/quantification.
Talanta, 163, 8-16, (2017)
   

amitriptyline

Kamari K et al., Preparation and evaluation of magnetic core-shell mesoporous molecularly imprinted polymers for selective adsorption of amitriptyline in biological samples.
Journal of the Taiwan Institute of Chemical Engineers, 86, 230-239, (2018)
   

amitriptyline

de Oliveira FM et al., Design of high-performance adsorption cross-linked organic functional polymers towards tricyclic antidepressants using computational simulation.
Journal of Environmental Chemical Engineering, 7, (1), Article102849-(2019)
   

amitriptyline

Rebelo P et al., Development of a molecular imprinted electrochemiluminescence sensor for amitriptyline detection: From MD simulations to experimental implementation.
Electrochimica Acta, 397, Article139273-(2021)
   

amitrole

Çakir O et al., Sensitive and selective detection of amitrole based on molecularly imprinted nanosensor.
Journal of Molecular Recognition, 34, (11), Article_e2929-(2021)
   

Amk

Bajpai SK et al., Selective removal of amikacin from simulated polluted water using molecularly imprinting polymer: A column study.
Journal of Macromolecular Science, Part A, 53, (9), 579-584, (2016)
   

AML

Zhang K et al., Adsorption behavior of a computer-aid designed magnetic molecularly imprinted polymer via response surface methodology.
RSC Advances, 5, (75), 61161-61169, (2015)
   

AML

Hrichi H et al., A novel electrochemical sensor based on electropolymerized molecularly imprinted poly(aniline-co-anthranilic acid) for sensitive detection of amlodipine.
Journal of Electroanalytical Chemistry, 805, 133-145, (2017)
   

amlodipine

Amut E et al., In situ polymerization preparation of chiral molecular imprinting polymers monolithic column for amlodipine and its recognition properties study.
Journal of Polymer Research, 17, (3), 401-409, (2010)
   

amlodipine

Proceeding, Li ZW et al, Chiral Separation of Amlodipine and its Enantiomer on a Molecularly Imprinted Polymer-Based Stationary Phase, 
In: Advanced Materials Research, Chen R, Sung WP, Kao JCM (Eds.), 36-39, (2013)
   

amlodipine

Zhang K et al., Adsorption behavior of a computer-aid designed magnetic molecularly imprinted polymer via response surface methodology.
RSC Advances, 5, (75), 61161-61169, (2015)
   

amlodipine

Zhao QL et al., Coatings of molecularly imprinted polymers based on polyhedral oligomeric silsesquioxane for open tubular capillary electrochromatography.
Talanta, 152, 277-282, (2016)
   

amlodipine

Song WF et al., A star-shaped molecularly imprinted polymer derived from polyhedral oligomeric silsesquioxanes with improved site accessibility and capacity for enantiomeric separation via capillary electrochromatography.
Microchimica Acta, 186, (1), Article22-(2018)
   

amlodipine

Roshan S et al., Molecularly Imprinted Polymer-Silica Hybrid Particles for Biomimetic Recognition of Target Drugs.
Advances in Polymer Technology, 2019, Article9432412-(2019)
   

amlopidine

Lai SZ et al., Rapid and efficient enantioseparation of (S)-amlodipine by surface-imprinted core-shell polymer microspheres.
Journal of Separation Science, 39, (22), 4354-4359, (2016)
   

amlopidine

Hrichi H et al., A novel electrochemical sensor based on electropolymerized molecularly imprinted poly(aniline-co-anthranilic acid) for sensitive detection of amlodipine.
Journal of Electroanalytical Chemistry, 805, 133-145, (2017)
   

amlopidine

Lai SZ et al., Highly efficient chiral separation of amlodipine enantiomers via triple recognition hollow fiber membrane extraction.
Journal of Chromatography A, 1490, 63-73, (2017)
   

amlopidine

Lai SZ et al., Surface-imprinted microspheres prepared by a template-oriented method for the chiral separation of amlodipine.
Journal of Separation Science, 40, (9), 1869-1876, (2017)
   

amlopidine

Wang XH et al., Enhancement of selective separation on molecularly imprinted monolith by molecular crowding agent.
Analytical and Bioanalytical Chemistry, 409, (1), 201-211, (2017)
   

amlopidine

Zhang LP et al., Solvent-responsive floating liquid crystalline-molecularly imprinted polymers for gastroretentive controlled drug release system.
International Journal of Pharmaceutics, 532, (1), 365-373, (2017)
   

ammelide

Ge XS et al., Highly sensitive determination of cyromazine, melamine, and their metabolites in milk by molecularly imprinted solid-phase extraction combined with ultra-performance liquid chromatography.
Journal of Dairy Science, 98, (4), 2161-2171, (2015)
   

ammeline

Ge XS et al., Highly sensitive determination of cyromazine, melamine, and their metabolites in milk by molecularly imprinted solid-phase extraction combined with ultra-performance liquid chromatography.
Journal of Dairy Science, 98, (4), 2161-2171, (2015)
   

ammonia

Antwi-Boampong S et al., A Molecularly Imprinted Fluoral-P/Polyaniline Double Layer Sensor System for Selective Sensing of Formaldehyde.
IEEE Sensors Journal, 14, (5), 1490-1498, (2014)
   

ammonia

Abdelghani R et al., Nano-architecture of highly sensitive SnO2-based gas sensors for acetone and ammonia using molecular imprinting technique.
Sensors and Actuators B: Chemical, 297, Article126668-(2019)
   

ammonia gas

Aba L et al., Selectivity Improvement of Gas Sensor Based on Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate) Thin Film by Using Imprinting Method.
Journal of Modern Physics, 3, (7), 529-533, (2012)
   

ammonium ion

Lopes N et al., Fiber optic sensor modified by grafting of the molecularly imprinted polymer for the detection of ammonium in aqueous media.
Scientific and Technical Journal of Information Technologies, Mechanics and Optics, 15, (4), 568-577, (2015)
   

ammonium ion

Proceeding, Sequeira F et al, Ammonium sensing in aqueous solutions with plastic optical fiber modified by molecular imprinting, 
ArticleNo99161I, (2016)
   

ammonium nitrate

Zhao C et al., Synthesis of Ammonium Nitrate Molecularly Imprinted Polymer within Hydrogels.
Progress in Modern Biomedicine, 11, (5), 864-866, (2011)
   

Amo

Wu ZH et al., Preparation and evaluation of amoxicillin loaded dual molecularly imprinted nanoparticles for anti-Helicobacter pylori therapy.
International Journal of Pharmaceutics, 496, (2), 1006-1014, (2015)
   

AMO

Ayankojo AG et al., Hybrid molecularly imprinted polymer for amoxicillin detection.
Biosensors and Bioelectronics, 118, 102-107, (2018)
   

AMO

Ayankojo AG et al., Molecularly imprinted poly(meta-phenylenediamine) based QCM sensor for detecting Amoxicillin.
Sensors and Actuators B: Chemical, 258, 766-774, (2018)
   

amobarbital

Hu SG et al., An amobarbital molecularly imprinted microsphere for selective solid-phase extraction of phenobarbital from human urine and medicines and their determination by high-performance liquid chromatography.
Analyst, 128, (12), 1485-1489, (2003)
   

amobarbital

Lin QM et al., Synthesis and Characterization of Molecularly Imprinted Polymers for Recognition of Amobarbital.
Journal of Instrumental Analysis, 23, (3), 43-45, (2004)
   

amobarbital

Hoshina K et al., Molecularly imprinted polymers for simultaneous determination of antiepileptics in river water samples by liquid chromatography-tandem mass spectrometry.
Journal of Chromatography A, 1216, (25), 4957-4962, (2009)
   

amobarbital

Huang XY et al., Preparation and Application of Novel Amobarbital Electrochemical Sensor Based on CuO Nanoparticles Modified Glassy Carbon.
Chemical Journal of Chinese Universities-Chinese, 35, (10), 2078-2084, (2014)
   

AmoNa

Wu ZH et al., Preparation and evaluation of amoxicillin loaded dual molecularly imprinted nanoparticles for anti-Helicobacter pylori therapy.
International Journal of Pharmaceutics, 496, (2), 1006-1014, (2015)
   

AMOX

Guerreiro JRL et al., Selective recognition in potentiometric transduction of amoxicillin by molecularly imprinted materials.
European Food Research and Technology, 232, (1), 39-50, (2011)
   

AMOX

Szultka M et al., Simultaneous determination of selected chemotherapeutics in human whole blood by molecularly imprinted polymers coated solid phase microextraction fibers and liquid chromatography-tandem mass spectrometry.
Journal of Chromatography B, 940, 66-76, (2013)
   

AMOX

Yola ML et al., Molecular imprinted nanosensor based on surface plasmon resonance: Application to the sensitive determination of amoxicillin.
Sensors and Actuators B: Chemical, 195, 28-35, (2014)
   

AMOX

Yang GM et al., Molecularly imprinted polymer grown on multiwalled carbon nanotube surface for the sensitive electrochemical determination of amoxicillin.
Electrochimica Acta, 174, 33-40, (2015)
   

amoxicillin

Benito-Peña E et al., Molecular engineering of fluorescent penicillins for molecularly imprinted polymer assays.
Analytical Chemistry, 78, (6), 2019-2027, (2006)
   

amoxicillin

Urraca JL et al., Molecularly Imprinted Polymers as Antibody Mimics in Automated On-Line Fluorescent Competitive Assays.
Analytical Chemistry, 79, (13), 4915-4923, (2007)
   

amoxicillin

Beltran A et al., Selective solid-phase extraction of amoxicillin and cephalexin from urine samples using a molecularly imprinted polymer.
Journal of Separation Science, 31, (15), 2868-2874, (2008)
   

amoxicillin

Beltran A et al., Molecularly imprinted solid-phase extraction of cephalexin from water-based matrices.
Journal of Separation Science, 32, (19), 3319-3326, (2009)
   

amoxicillin

Wan FW et al., Molecular Imprinting-Chemiluminescence Sensor for the Determination of Amoxicillin.
Analytical Letters, 43, (6), 1033-1045, (2010)
   

amoxicillin

Yin JF et al., Pseudo-template molecularly imprinted polymer for selective screening of trace β-lactam antibiotics in river and tap water.
Journal of Chromatography A, 1217, (33), 5420-5426, (2010)
   

amoxicillin

Zhang XP et al., Determination of β-lactam antibiotics in milk based on magnetic molecularly imprinted polymer extraction coupled with liquid chromatography-tandem mass spectrometry.
Journal of Chromatography B, 878, (32), 3421-3426, (2010)
   

amoxicillin

Guerreiro JRL et al., Selective recognition in potentiometric transduction of amoxicillin by molecularly imprinted materials.
European Food Research and Technology, 232, (1), 39-50, (2011)
   

amoxicillin

Szultka M et al., Development of novel molecularly imprinted solid-phase microextraction fibers and their application for the determination of antibiotic drugs in biological samples by SPME-LC/MS<sup>n</sup>.
Analytical and Bioanalytical Chemistry, 403, (3), 785-796, (2012)
   

amoxicillin

Szultka M et al., Simultaneous determination of selected chemotherapeutics in human whole blood by molecularly imprinted polymers coated solid phase microextraction fibers and liquid chromatography-tandem mass spectrometry.
Journal of Chromatography B, 940, 66-76, (2013)
   

amoxicillin

Szultka M et al., Pharmacokinetic study of amoxicillin in human plasma by solid-phase microextraction followed by high-performance liquid chromatography-triple quadrupole mass spectrometry.
Biomedical Chromatography, 28, (2), 255-264, (2014)
   

amoxicillin

Yola ML et al., Molecular imprinted nanosensor based on surface plasmon resonance: Application to the sensitive determination of amoxicillin.
Sensors and Actuators B: Chemical, 195, 28-35, (2014)
   

amoxicillin

Díaz-Bao M et al., Fast HPLC-MS/MS Method for Determining Penicillin Antibiotics in Infant Formulas Using Molecularly Imprinted Solid-Phase Extraction.
Journal of Analytical Methods in Chemistry, 2015, ArticleID959675-(2015)
   

amoxicillin

Valencia Castro LE et al., Chemical polymerization of pyrrole in the presence of l-serine or l-glutamic acid: Electrically controlled amoxicillin release from composite hydrogel.
Journal of Applied Polymer Science, 132, (15), Article No 41804-(2015)
   

amoxicillin

Wu ZH et al., Preparation and evaluation of amoxicillin loaded dual molecularly imprinted nanoparticles for anti-Helicobacter pylori therapy.
International Journal of Pharmaceutics, 496, (2), 1006-1014, (2015)
   

amoxicillin

Yang GM et al., Molecularly imprinted polymer grown on multiwalled carbon nanotube surface for the sensitive electrochemical determination of amoxicillin.
Electrochimica Acta, 174, 33-40, (2015)
   

amoxicillin

Ayankojo AG et al., Hybrid molecularly imprinted polymer for amoxicillin detection.
Biosensors and Bioelectronics, 118, 102-107, (2018)
   

amoxicillin

Ayankojo AG et al., Molecularly imprinted poly(meta-phenylenediamine) based QCM sensor for detecting Amoxicillin.
Sensors and Actuators B: Chemical, 258, 766-774, (2018)
   

amoxicillin

Chullasat K et al., A facile optosensing protocol based on molecularly imprinted polymer coated on CdTe quantum dots for highly sensitive and selective amoxicillin detection.
Sensors and Actuators B: Chemical, 254, 255-263, (2018)
   

amoxicillin

Zeinali S et al., Fabrication of a Selective and Sensitive Electrochemical Sensor Modified with Magnetic Molecularly Imprinted Polymer for Amoxicillin.
Analytical and Bioanalytical Chemistry Research, 5, (2), 195-204, (2018)
   

amoxicillin

Noori N et al., Separation and determination of amoxicillin in wastewater samples using molecularly imprinted polymer nanoparticles followed by HPLC-UV.
Advances in Nanochemistry, 1, (1), 17-21, (2019)
   

amoxicillin

Jamieson O et al., Screen Printed Electrode Based Detection Systems for the Antibiotic Amoxicillin in Aqueous Samples Utilising Molecularly Imprinted Polymers as Synthetic Receptors.
Chemosensors, 8, (1), ArticleNo5-(2020)
   

amoxicillin

Li SH et al., Novel molecularly imprinted amoxicillin sensor based on a dual recognition and dual detection strategy.
Analytica Chimica Acta, 1127, 69-78, (2020)
   

AMP

Sreenivasan K, Synthesis and evaluation of multiply templated molecularly imprinted polyaniline.
Journal of Materials Science, 42, (17), 7575-7578, (2007)
   

AMP

Breton F et al., Selective adenosine-5’-monophosphate uptake by water-compatible molecularly imprinted polymer.
Analytica Chimica Acta, 616, (2), 222-229, (2008)
   

AMP

Breton F et al., Molecular imprinting of AMP by an ionic-noncovalent dual approach.
Journal of Separation Science, 32, (19), 3285-3291, (2009)
   

AMP

González-Mariño I et al., Comparison of molecularly imprinted, mixed-mode and hydrophilic balance sorbents performance in the solid-phase extraction of amphetamine drugs from wastewater samples for liquid chromatography-tandem mass spectrometry determination.
Journal of Chromatography A, 1216, (48), 8435-8441, (2009)
   

AMP

Puoci F et al., New restricted access materials combined to molecularly imprinted polymers for selective recognition/release in water media.
European Polymer Journal, 45, (6), 1634-1640, (2009)
   

AMP

Proceeding, Djozan D et al, A new inside-needle extraction method based on molecularly imprinted polymer to solid-phase dynamic extraction and pre-concentration of methamphetamine followed by gas chromatography analysis, 
(2011)
   

4-AMP

Baykara E et al., Synthesis of monolithic HPLC stationary phase with self-assembled molecular recognition sites for 4-aminophenol.
Journal of Applied Polymer Science, 123, (1), 493-501, (2012)
   

AMP

Djozan D et al., Determination of methamphetamine, amphetamine and ecstasy by inside-needle adsorption trap based on molecularly imprinted polymer followed by GC-FID determination.
Microchimica Acta, 179, (3), 209-217, (2012)
   

AMP

Proceeding, Aouled NO et al, Love wave sensor based on thin film molecularly imprinted polymer : MIP layer morphology and nucleosides analogs detection, 
1-4, (2013)
   

AMP

Proceeding, Hallil H et al, SH-SAW sensing system based on thin film molecularly imprinted polymer: Study of Volatile organic compounds adsorption, 
Art No 6676129, (2013)
   

AMP

Proceeding, Lebal N et al, Association of a Love wave sensor to thin film molecularly imprinted polymers for nucleosides analogs detection, 
550-553, (2013)
   

AMP

Lebal N et al., Nucleosides analogues recognition by molecularly imprinted polymer-coated Love wave sensor.
Micro and Nano Letters, 8, (10), 563-566, (2013)
   

AMP

Proceeding, Lebal N et al, Real-time study of adenosine-5’ monophosphate adsorption with a Love wave sensor based on molecularly imprinted polymer, 
1-3, (2014)
   

AMP

Wei SL et al., Molecularly imprinted electrochemical sensor for the determination of ampicillin based on a gold nanoparticle and multiwalled carbon nanotube-coated pt electrode.
Journal of Applied Polymer Science, 131, (16), Article No 40613-(2014)
   

AMP

Chen Y et al., Dual-template docking oriented molecular imprinting: a facile strategy for highly efficient imprinting within mesoporous materials.
Chemical Communications, 51, (54), 10929-10932, (2015)
   

AMP

Diaz-Faes Lopez T et al., Controlled Release of Nafcillin Using Biocompatible "Dummy" Molecularly Imprinted Sol-Gel Nanospheres.
Current Topics in Medicinal Chemistry, 15, (3), 262-270, (2015)
   

AMP

Dejous C et al., Love Acoustic Wave-Based Devices and Molecularly-Imprinted Polymers as Versatile Sensors for Electronic Nose or Tongue for Cancer Monitoring.
Sensors, 16, (6), ArticleNo915-(2016)
   

AMP

Mourão CA et al., Dual-Oriented Solid-Phase Molecular Imprinting: Toward Selective Artificial Receptors for Recognition of Nucleotides in Water.
Macromolecules, 50, (19), 7484-7490, (2017)
   

AMP

Soledad-Rodríguez B et al., Effective determination of ampicillin in cow milk using a molecularly imprinted polymer as sorbent for sample preconcentration.
Food Chemistry, 224, 432-438, (2017)
   

AMP

Tian Y et al., Preparation of Ampicillin Surface Molecularly Imprinted Polymers for Its Selective Recognition of Ampicillin in Eggs Samples.
International Journal of Analytical Chemistry, 2018, ArticleID5897381-(2018)
   

5’-AMP

Ayari MG et al., Synthesis of imprinted hydrogel microbeads by inverse Pickering emulsion to controlled release of adenosine 5’-monophosphate.
Materials Science and Engineering: C, 101, 254-263, (2019)
   

AMP

De Rycke E et al., Novel multiplex capacitive sensor based on molecularly imprinted polymers: A promising tool for tracing specific amphetamine synthesis markers in sewage water.
Biosensors and Bioelectronics, 178, Article113006-(2021)
   

AMPA

Kittlaus S et al., New Approaches for Determination of Glyphosate and Aminomethylphosphonic Acid from Different Tea Samples-Prospects and Limits of Cleanup with Molecularly Imprinted Polymer and Titanium Dioxide.
Journal of AOAC International, 92, (3), 703-714, (2009)
   

AMPA

da Mata K et al., Synthesis and characterization of cross-linked molecularly imprinted polyacrylamide for the extraction/preconcentration of glyphosate and aminomethylphosphonic acid from water samples.
Reactive and Functional Polymers, 83, 76-83, (2014)
   

AMPA

Berho C et al., Laboratory calibration of a POCIS-like sampler based on molecularly imprinted polymers for glyphosate and AMPA sampling in water.
Analytical and Bioanalytical Chemistry, 409, (8), 2029-2035, (2017)
   

AMPA

Claude B et al., Preliminary recovery study of a commercial molecularly imprinted polymer for the extraction of glyphosate and AMPA in different environmental waters using MS.
Environmental Science and Pollution Research, 24, (13), 12293-12300, (2017)
   

AMPAs

Le Moullec S et al., Extraction of alkyl methylphosphonic acids from aqueous samples using a conventional polymeric solid-phase extraction sorbent and a molecularly imprinted polymer.
Journal of Chromatography A, 1139, (2), 171-177, (2007)
   

amphenicol antibiotics

Shi XZ et al., Characterisation and application of molecularly imprinted polymers for group-selective recognition of antibiotics in food samples.
Analyst, 137, (14), 3381-3389, (2012)
   

amphenicols

Lü YK et al., On-line Solid-Phase Extraction Using Molecularly Imprinted Polymer Microspheres in Combination with HPLC for the Determination of Amphenicols Residues in Milk.
Food Science, 34, (16), 238-242, (2013)
   

amphetamine

Anon, MIP Technologies And Supelco Launch A New Selective SPE Product For The Extraction Of Amphetamine And Related Drugs. Medical News Today, 
(2008)
   

amphetamine

Widstrand C et al., The Extraction of Amphetamine and Related Drugs using SupelMIP™ Molecularly Imprinted Polymer SPE. The Reporter Europe, 
31, 11-13, (2008)
   

amphetamine

González-Mariño I et al., Comparison of molecularly imprinted, mixed-mode and hydrophilic balance sorbents performance in the solid-phase extraction of amphetamine drugs from wastewater samples for liquid chromatography-tandem mass spectrometry determination.
Journal of Chromatography A, 1216, (48), 8435-8441, (2009)
   

amphetamine

Chang J et al., Application of molecularly imprinted solid-phase extraction for separating and assaying amphetamines in blood samples.
Chinese Journal of Forensic Medicine, 26, (1), 22-25, (2011)
   

amphetamine

Proceeding, Djozan D et al, A new inside-needle extraction method based on molecularly imprinted polymer to solid-phase dynamic extraction and pre-concentration of methamphetamine followed by gas chromatography analysis, 
(2011)
   

amphetamine

Djozan D et al., Determination of methamphetamine, amphetamine and ecstasy by inside-needle adsorption trap based on molecularly imprinted polymer followed by GC-FID determination.
Microchimica Acta, 179, (3), 209-217, (2012)
   

amphetamine

Kumazawa T et al., Molecularly imprinted solid-phase extraction for the selective determination of methamphetamine, amphetamine, and methylenedioxyphenylalkylamine designer drugs in human whole blood by gas chromatography-mass spectrometry.
Journal of Separation Science, 35, (5-6), 726-733, (2012)
   

amphetamine

Wongniramaikul W et al., A comprehensive chromatographic comparison of amphetamine and methylamphetamine extracted from river water using molecular imprinted polymers and without the need for sample derivatization.
Journal of Separation Science, 35, (23), 3332-3339, (2012)
   

amphetamine

El-Beqqali A et al., Molecularly imprinted polymer-sol-gel tablet toward micro-solid phase extraction: II. Determination of amphetamine in human urine samples by liquid chromatography-tandem mass spectrometry.
Journal of Chromatography B, 1063, 130-135, (2017)
   

amphetamine

Monier M et al., Synthesis of imprinted styrene-maleic acid functionalized resin for enantio-selective extraction of R-amphetamine.
Chemical Engineering Journal, 356, 693-701, (2019)
   

amphetamine

Lowdon JW et al., A Molecularly Imprinted Polymer-based Dye Displacement Assay for the Rapid Visual Detection of Amphetamine in Urine.
Molecules, 25, (22), ArticleNo5222-(2020)
   

amphetamine

De Rycke E et al., Novel multiplex capacitive sensor based on molecularly imprinted polymers: A promising tool for tracing specific amphetamine synthesis markers in sewage water.
Biosensors and Bioelectronics, 178, Article113006-(2021)
   

amphetamines

González-Mariño I et al., Comparison of molecularly imprinted, mixed-mode and hydrophilic balance sorbents performance in the solid-phase extraction of amphetamine drugs from wastewater samples for liquid chromatography-tandem mass spectrometry determination.
Journal of Chromatography A, 1216, (48), 8435-8441, (2009)
   

amphiphilic monosaccharide

Maury D et al., Synthesis and evaluation of new lipomonosaccharide-imprinted polymers as MISPE supports.
Talanta, 73, (2), 340-345, (2007)
   

AMPI

Shi XZ et al., Water Compatible Molecularly Imprinted Polymer Microspheres for Extraction of Ampicillin in Foods.
Analytical Letters, 43, (5), 757-767, (2010)
   

ampicillin

Lübke C et al., Imprinted polymers prepared with stoichiometric template-monomer complexes: Efficient binding of ampicillin from aqueous solutions.
Macromolecules, 33, (14), 5098-5105, (2000)
   

ampicillin

Sreenivasan K, Surface-imprinted polyurethane having affinity sites for ampicillin.
Macromolecular Bioscience, 5, (3), 187-191, (2005)
   

ampicillin

Benito-Peña E et al., Molecular engineering of fluorescent penicillins for molecularly imprinted polymer assays.
Analytical Chemistry, 78, (6), 2019-2027, (2006)
   

ampicillin

Urraca JL et al., Molecularly Imprinted Polymers as Antibody Mimics in Automated On-Line Fluorescent Competitive Assays.
Analytical Chemistry, 79, (13), 4915-4923, (2007)
   

ampicillin

Shi XZ et al., Water Compatible Molecularly Imprinted Polymer Microspheres for Extraction of Ampicillin in Foods.
Analytical Letters, 43, (5), 757-767, (2010)
   

ampicillin

Yin JF et al., Pseudo-template molecularly imprinted polymer for selective screening of trace β-lactam antibiotics in river and tap water.
Journal of Chromatography A, 1217, (33), 5420-5426, (2010)
   

ampicillin

Wei SL et al., Molecularly imprinted electrochemical sensor for the determination of ampicillin based on a gold nanoparticle and multiwalled carbon nanotube-coated pt electrode.
Journal of Applied Polymer Science, 131, (16), Article No 40613-(2014)
   

ampicillin

Diaz-Faes Lopez T et al., Controlled Release of Nafcillin Using Biocompatible "Dummy" Molecularly Imprinted Sol-Gel Nanospheres.
Current Topics in Medicinal Chemistry, 15, (3), 262-270, (2015)
   

ampicillin

Díaz-Bao M et al., Fast HPLC-MS/MS Method for Determining Penicillin Antibiotics in Infant Formulas Using Molecularly Imprinted Solid-Phase Extraction.
Journal of Analytical Methods in Chemistry, 2015, ArticleID959675-(2015)
   

ampicillin

Czulak J et al., Formation of target-specific binding sites in enzymes: solid-phase molecular imprinting of HRP.
Nanoscale, 8, (21), 11060-11066, (2016)
   

ampicillin

Karaseva N et al., Piezoelectric sensors using molecularly imprinted nanospheres for the detection of antibiotics.
Sensors and Actuators B: Chemical, 225, 199-208, (2016)
   

ampicillin

Wu NL et al., A novel surface molecularly imprinted polymer as the solid-phase extraction adsorbent for the selective determination of ampicillin sodium in milk and blood samples.
Journal of Pharmaceutical Analysis, 6, (3), 157-164, (2016)
   

ampicillin

Soledad-Rodríguez B et al., Effective determination of ampicillin in cow milk using a molecularly imprinted polymer as sorbent for sample preconcentration.
Food Chemistry, 224, 432-438, (2017)
   

ampicillin

Lian WJ et al., Enzymatic logic calculation systems based on solid-state electrochemiluminescence and molecularly imprinted polymer film electrodes.
Biosensors and Bioelectronics, 100, 326-332, (2018)
   

ampicillin

Tian Y et al., Preparation of Ampicillin Surface Molecularly Imprinted Polymers for Its Selective Recognition of Ampicillin in Eggs Samples.
International Journal of Analytical Chemistry, 2018, ArticleID5897381-(2018)
   

ampicillin

Raksawong P et al., A polypyrrole doped with fluorescent CdTe quantum dots and incorporated into molecularly imprinted silica for fluorometric determination of ampicillin.
Microchimica Acta, 186, (6), Article338-(2019)
   

ampicillin

Liu ZY et al., Electrochemical assay of ampicillin using Fe3N-Co2N nanoarray coated with molecularly imprinted polymer.
Microchimica Acta, 187, (8), Article442-(2020)
   

Amplex Red

Zhang ZJ et al., Intracellular delivery of a molecularly imprinted peroxidase mimicking DNAzyme for selective oxidation.
Materials Horizons, 5, (4), 738-744, (2018)
   

AMT

Kamari K et al., Preparation and evaluation of magnetic core-shell mesoporous molecularly imprinted polymers for selective adsorption of amitriptyline in biological samples.
Journal of the Taiwan Institute of Chemical Engineers, 86, 230-239, (2018)
   

AMT

de Oliveira FM et al., Design of high-performance adsorption cross-linked organic functional polymers towards tricyclic antidepressants using computational simulation.
Journal of Environmental Chemical Engineering, 7, (1), Article102849-(2019)
   

AMT

Rebelo P et al., Development of a molecular imprinted electrochemiluminescence sensor for amitriptyline detection: From MD simulations to experimental implementation.
Electrochimica Acta, 397, Article139273-(2021)
   

AMX

Beltran A et al., Selective solid-phase extraction of amoxicillin and cephalexin from urine samples using a molecularly imprinted polymer.
Journal of Separation Science, 31, (15), 2868-2874, (2008)
   

AMX

Beltran A et al., Molecularly imprinted solid-phase extraction of cephalexin from water-based matrices.
Journal of Separation Science, 32, (19), 3319-3326, (2009)
   

AMX

Zeinali S et al., Fabrication of a Selective and Sensitive Electrochemical Sensor Modified with Magnetic Molecularly Imprinted Polymer for Amoxicillin.
Analytical and Bioanalytical Chemistry Research, 5, (2), 195-204, (2018)
   

amygdalin

Korde BA et al., Nanoporous imprinted polymers (nanoMIPs) for controlled release of cancer drug.
Materials Science and Engineering: C, 99, 222-230, (2019)
   

α-amylase

Silvestri D et al., Molecularly imprinted bioartificial membranes for the selective recognition of biological molecules. Part 2: Release of components and thermal analysis.
Journal of Biomaterials Science-Polymer Edition, 16, (3), 397-410, (2005)
   

α-amylase

Silvestri D et al., Molecularly imprinted membranes for an improved recognition of biomolecules in aqueous medium.
Journal of Membrane Science, 282, (1-2), 284-295, (2006)
   

α-amylase

Silvestri D et al., Poly(ethylene-co-vinyl alcohol) membranes with specific adsorption properties for potential clinical application.
Desalination, 199, (1-3), 138-140, (2006)
   

α-amylase

Silvestri D et al., Poly(ethylene-co-vinyl alcohol) Membranes with Specific Adsorption Properties for Potential Clinical Application.
Separation Science and Technology, 42, (13), 2829-2847, (2007)
   

amylase

Lee MH et al., Optical recognition of salivary proteins by use of molecularly imprinted poly(ethylene-co-vinyl alcohol)/quantum dot composite nanoparticles.
Analytical and Bioanalytical Chemistry, 397, (4), 1457-1466, (2010)
   

amylase

Lee MH et al., Sensing of Digestive Proteins in Saliva with a Molecularly Imprinted Poly(ethylene-co-vinyl alcohol) Thin Film Coated Quartz Crystal Microbalance Sensor.
ACS Applied Materials & Interfaces, 3, (8), 3064-3071, (2011)
   

α-amylase

Proceeding, Niroomandi Z et al, Isolation and Purification of α-Amylase Enzyme Using MIP Technique, 
100-105, (2011)
   

amylase

Lee MH et al., Hydrolysis of Magnetic Amylase-Imprinted Poly(ethylene-co-vinyl alcohol) Composite Nanoparticles.
ACS Applied Materials & Interfaces, 4, (2), 916-921, (2012)
   

amylase

Lee MH et al., The complete replacement of antibodies by protein-imprinted poly(ethylene-co-vinyl alcohol) in sandwich fluoroimmunoassays.
Microchimica Acta, 180, (15-16), 1393-1399, (2013)
   

α-amylase

Poma A et al., Automatic reactor for solid-phase synthesis of molecularly imprinted polymeric nanoparticles (MIP NPs) in water.
RSC Advances, 4, (8), 4203-4206, (2014)
   

amylase

Guerreiro JRL et al., Molecular Imprinting of Complex Matrices at Localized Surface Plasmon Resonance Biosensors for Screening of Global Interactions of Polyphenols and Proteins.
ACS Sensors, 1, (3), 258-264, (2016)
   

β-amyloid-42

Moreira FTC et al., Redox probe-free readings of a β-amyloid-42 plastic antibody sensory material assembled on copper@carbon nanotubes.
Sensors and Actuators B: Chemical, 264, 1-9, (2018)
   

amyloid β-42

Moreira FTC et al., Colorimetric cellulose-based test-strip for rapid detection of amyloid β-42.
Microchimica Acta, 188, (10), Article334-(2021)
   

amyloid beta protein fragment 25-35

Cristallini C et al., A new strategy to reduce amyloid deposition using peptide-imprinted membranes.
Journal of Applied Biomaterials & Funtional Materials, 14, (2), e129-e136, (2016)
   

β-amyloid isoforms

Urraca JL et al., Polymeric Complements to the Alzheimer’s Disease Biomarker β-Amyloid Isoforms Aβ1-40 and Aβ1-42 for Blood Serum Analysis under Denaturing Conditions.
Journal of the American Chemical Society, 133, (24), 9220-9223, (2011)
   

β-amyloid peptides

Fa SX et al., General Method for Peptide Recognition in Water through Bioinspired Complementarity.
Chemistry of Materials, 31, (13), 4889-4896, (2019)
   

β-amyloid protein

Urraca JL et al., Polymeric Complements to the Alzheimer’s Disease Biomarker β-Amyloid Isoforms Aβ1-40 and Aβ1-42 for Blood Serum Analysis under Denaturing Conditions.
Journal of the American Chemical Society, 133, (24), 9220-9223, (2011)
   

β-amyloid-42 soluble oligomer

Moreira FTC et al., Smart naturally plastic antibody based on poly(α-cyclodextrin) polymer for β-amyloid-42 soluble oligomer detection.
Sensors and Actuators B: Chemical, 240, 229-238, (2017)
   

AN

Vanossi D et al., Electropolymerization of ortho-phenylenediamine. Structural characterisation of the resulting polymer film and its interfacial capacitive behaviour.
Journal of Electroanalytical Chemistry, 710, 22-28, (2013)
   

AN

Zhou J et al., Sensitive Artemisinin Electrochemical Sensor Based on Polymerized Molecularly Imprinted Membranes.
International Journal of Electrochemical Science, 11, 3114-3122, (2016)
   

AN

Villar-Navarro M et al., Easy, fast and environmental friendly method for the simultaneous extraction of the 16 EPA PAHs using magnetic molecular imprinted polymers (mag-MIPs).
Journal of Chromatography B, 1044-1045, 63-69, (2017)
   

AN

Zhao L et al., Improving affinity of β-cyclodextrin-based molecularly imprinted polymer using room temperature ionic liquid.
European Polymer Journal, 116, 275-282, (2019)
   

Anabaena sp. PCC7120

Darder Ma et al., Algae-silica systems as functional hybrid materials.
Journal of Materials Chemistry, 20, (42), 9362-9369, (2010)
   

analgin

He YH et al., Molecular imprinting-chemiluminescence determination of analgin.
Chemical Journal of Chinese Universities, 26, (4), 642-646, (2005)
   

analog template

Fang GZ et al., A novel molecularly imprinted polymer on CdSe/ZnS quantum dots for highly selective optosensing of mycotoxin zearalenone in cereal samples.
RSC Advances, 4, (6), 2764-2771, (2014)
   

analogue template

Zhang HW et al., On-line Determination of Trimethoprim in Human Serum by Molecularly Imprinted Monolithic Column with Melamine Employed as Analogue Template.
Chinese Journal of Analytical Chemistry, 40, (5), 699-704, (2012)
   

analogue template

Huang CX et al., Molecularly imprinted photocatalyst with a structural analogue of template and its application.
Journal of Hazardous Materials, 248 - 249, 379-386, (2013)
   

analogue template

Appell M et al., Determination of fusaric acid in maize using molecularly imprinted SPE clean-up.
Journal of Separation Science, 37, (3), 281-286, (2014)
   

analogue template

Ray JV et al., Smart coumarin-tagged imprinted polymers for the rapid detection of tamoxifen.
Analytical and Bioanalytical Chemistry, 408, (7), 1855-1861, (2016)
   

analogue template

Sobiech M et al., Separation of octopamine racemate on (R,S)-2-amino-1-phenylethanol imprinted polymer - Experimental and computational studies.
Talanta, 146, 556-567, (2016)
   

analogue-template

Song XL et al., Preparation of analog-molecularly imprinted microspheres and their adsorbent performance for microcystin in aqueous solution.
Environmental Chemistry, 35, (3), 451-459, (2016)
   

analogue template

Herrera-Chacon A et al., Molecularly Imprinted Polymers for TNT Analogues. Development of Electrochemical TNT Biosensors.
Proceedings, 1, (8), ArticleNo731-(2017)
   

analogue template

Liu JM et al., Upconversion Nanophosphor-Involved Molecularly Imprinted Fluorescent Polymers for Sensitive and Specific Recognition of Sterigmatocystin.
Polymers, 9, (7), ArticleNo299-(2017)
   

analogue template

Carboni D et al., Selective detection of organophosphate through molecularly imprinted GERS-active hybrid organic-inorganic materials.
Journal of Raman Spectroscopy, 49, (1), 189-197, (2018)
   

anatoxin B1

Sergeyeva TA et al., Aflatoxin-selective molecularly-imprinted polymer membranes based on acrylate-polyurethane semi-interpenetrating polymer networks.
Ukrainskii Biokhimicheskii Zhurnal, 79, (5), 109-115, (2007)
   

anatoxin B2

Sergeyeva TA et al., Aflatoxin-selective molecularly-imprinted polymer membranes based on acrylate-polyurethane semi-interpenetrating polymer networks.
Ukrainskii Biokhimicheskii Zhurnal, 79, (5), 109-115, (2007)
   

anatoxin G2

Sergeyeva TA et al., Aflatoxin-selective molecularly-imprinted polymer membranes based on acrylate-polyurethane semi-interpenetrating polymer networks.
Ukrainskii Biokhimicheskii Zhurnal, 79, (5), 109-115, (2007)
   

2-AnCO2H

Lee SW et al., Regioselective imprinting of anthracenecarboxylic acids onto TiO2 gel ultrathin films: an approach to thin film sensor.
Sensors and Actuators B: Chemical, 104, (1), 35-42, (2005)
   

9-AnCO2H

Lee SW et al., Regioselective imprinting of anthracenecarboxylic acids onto TiO2 gel ultrathin films: an approach to thin film sensor.
Sensors and Actuators B: Chemical, 104, (1), 35-42, (2005)
   

2-AnCO2H

Yang DH et al., Facile fabrication of molecularly imprinted cavities in spin-coated TiO2 nanofilms.
Chemistry Letters, 34, (12), 1686-1687, (2005)
   

9-AnCO2H

Yang DH et al., Facile fabrication of molecularly imprinted cavities in spin-coated TiO2 nanofilms.
Chemistry Letters, 34, (12), 1686-1687, (2005)
   

9-AnCOOH

Liu YT et al., Enhanced photocatalysis on TiO2 nanotube arrays modified with molecularly imprinted TiO2 thin film.
Journal of Hazardous Materials, 182, (1-3), 912-918, (2010)
   

ANDRO

Sanglar C et al., Study of Prepolymerization Complex Formation in the Synthesis of Steroid-Based Molecularly Imprinted Polymers.
Analytical Chemistry, 84, (10), 4481-4488, (2012)
   

andrographolide

Yin XY et al., The Spectroscopy Analysis of Intermolecular Interaction Between the Template Molecule and Functional Monomer Before Polymerization.
Spectroscopy and Spectral Analysis, 30, (8), 2211-2214, (2010)
   

andrographolide

Proceeding, Yin XY et al, Preparation and recognition properties of andrographolide molecularly imprinted ploymer microspheres, 
In: Advanced Materials Research, Zhang GJ, Xu J (Eds.), 777-782, (2010)
   

andrographolide

Yin XY et al., Development of andrographolide molecularly imprinted polymer for solid-phase extraction.
Spectrochimica Acta Part A-Molecular and Biomolecular Spctroscopy, 79, (1), 191-196, (2011)
   

andrographolide

Proceeding, Yin XY et al, The Effect on Adsorption Performance of Molecularly Imprinted Polymer Using the Different Functional Monomers, 
In: Advanced Materials Research, Bu JL, Wang PC, Ai LQ, Sang XM, Li YG (Eds.), 334-337, (2011)
   

andrographolide

Krishnan H et al., Rational computational design for the development of andrographolide molecularly imprinted polymer.
AIP Conference Proceedings, 1891, (1), ArticleNo020083-(2017)
   

androsta-1,4-dien-3,17-dione

Khomutov S et al., Nanodimer cyclodextrin ligands with high affinity to steroids.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 70, (3), 353-357, (2011)
   

1,4-androstadiene-3, 17-dione

Rachkov AE et al., Molecularly imprinted polymers as artificial steroid receptors.
Polymers for Advanced Technologies, 9, (8), 511-519, (1998)
   

1,4-androstadiene-3,17-dione

Zulfiqar A et al., Detection of multiple steroidal compounds in synthetic urine using comprehensive gas chromatography-mass spectrometry (GC x GC-MS) combined with a molecularly imprinted polymer clean-up protocol.
Analyst, 139, (19), 4955-4963, (2014)
   

androstane

Khomutov S et al., Nanodimer cyclodextrin ligands with high affinity to steroids.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 70, (3), 353-357, (2011)
   

5α-androstane-3,17-diol

Zulfiqar A et al., Detection of multiple steroidal compounds in synthetic urine using comprehensive gas chromatography-mass spectrometry (GC x GC-MS) combined with a molecularly imprinted polymer clean-up protocol.
Analyst, 139, (19), 4955-4963, (2014)
   

5α-androstane-3,17-dione

Zulfiqar A et al., Detection of multiple steroidal compounds in synthetic urine using comprehensive gas chromatography-mass spectrometry (GC x GC-MS) combined with a molecularly imprinted polymer clean-up protocol.
Analyst, 139, (19), 4955-4963, (2014)
   

androst-4-en-3,17-dione

Khomutov S et al., Nanodimer cyclodextrin ligands with high affinity to steroids.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 70, (3), 353-357, (2011)
   

4-androstene-3β,17β-diol

Zulfiqar A et al., Detection of multiple steroidal compounds in synthetic urine using comprehensive gas chromatography-mass spectrometry (GC x GC-MS) combined with a molecularly imprinted polymer clean-up protocol.
Analyst, 139, (19), 4955-4963, (2014)
   

5(6)-androstene-3β,17β-diol

Zulfiqar A et al., Detection of multiple steroidal compounds in synthetic urine using comprehensive gas chromatography-mass spectrometry (GC x GC-MS) combined with a molecularly imprinted polymer clean-up protocol.
Analyst, 139, (19), 4955-4963, (2014)
   

Δ (4) -androstene-3, 17-dione

Rachkov AE et al., Molecularly imprinted polymers as artificial steroid receptors.
Polymers for Advanced Technologies, 9, (8), 511-519, (1998)
   

androstenedione

Sanglar C et al., Study of Prepolymerization Complex Formation in the Synthesis of Steroid-Based Molecularly Imprinted Polymers.
Analytical Chemistry, 84, (10), 4481-4488, (2012)
   

5(6)-androstene-3,17-dione

Zulfiqar A et al., Detection of multiple steroidal compounds in synthetic urine using comprehensive gas chromatography-mass spectrometry (GC x GC-MS) combined with a molecularly imprinted polymer clean-up protocol.
Analyst, 139, (19), 4955-4963, (2014)
   

4-androstene-17β-ol-3-one

Zulfiqar A et al., Detection of multiple steroidal compounds in synthetic urine using comprehensive gas chromatography-mass spectrometry (GC x GC-MS) combined with a molecularly imprinted polymer clean-up protocol.
Analyst, 139, (19), 4955-4963, (2014)
   

5(6)-androsten-3β-ol-17-one

Zulfiqar A et al., Detection of multiple steroidal compounds in synthetic urine using comprehensive gas chromatography-mass spectrometry (GC x GC-MS) combined with a molecularly imprinted polymer clean-up protocol.
Analyst, 139, (19), 4955-4963, (2014)
   

androsterone

Sanglar C et al., Study of Prepolymerization Complex Formation in the Synthesis of Steroid-Based Molecularly Imprinted Polymers.
Analytical Chemistry, 84, (10), 4481-4488, (2012)
   

Ang II

Tan L et al., Molecularly Imprinted Polymer Nanogels Targeting C-Terminal of Angiotensin II for Lowering Blood Pressure of Rats by Oral Perfusion.
Journal of Biomedical Nanotechnology, 13, (9), 1035-1044, (2017)
   

angiotensin

Rachkov A et al., Molecularly imprinted polymers prepared in aqueous solution selective for [Sar(1),Ala(8)]angiotensin II.
Analytica Chimica Acta, 504, (1), 191-197, (2004)
   

angiotensin-converting-enzyme-inhibitory peptide

Liu L et al., Amino Acid Imprinted UiO-66s for Highly Recognized Adsorption of Small Angiotensin-Converting-Enzyme-Inhibitory Peptides.
ACS Applied Materials & Interfaces, 11, (26), 23039-23049, (2019)
   

angiotensin I

Lin CC et al., A novel monolithic column for capillary electrochromatographic separation of oligopeptides.
Analytica Chimica Acta, 572, (2), 197-204, (2006)
   

angiotensin I

Sumaoka J et al., Recognition of bioactive oligopeptide by imprinted cyclodextrin polymer in water.
Polymer Preprints, Japan, 55, (1), 1668-(2006)
   

angiotensin I

Song SH et al., Recognition of Solution Structures of Peptides by Molecularly Imprinted Cyclodextrin Polymers.
Macromolecules, 40, (10), 3530-3532, (2007)
   

angiotensin I

Yu ZR et al., Recognition and neutralization of angiotensins I and II using an artificial nanogel receptor fabricated by ligand specificity determinant imprinting.
Chemical Communications, 50, (21), 2728-2731, (2014)
   

angiotensin I

Tan L et al., Antibody-free ultra-high performance liquid chromatography/tandem mass spectrometry measurement of angiotensin I and II using magnetic epitope-imprinted polymers.
Journal of Chromatography A, 1411, 69-76, (2015)
   

angiotensin II

Lin CC et al., A novel monolithic column for capillary electrochromatographic separation of oligopeptides.
Analytica Chimica Acta, 572, (2), 197-204, (2006)
   

angiotensin II

Song SH et al., Recognition of Solution Structures of Peptides by Molecularly Imprinted Cyclodextrin Polymers.
Macromolecules, 40, (10), 3530-3532, (2007)
   

angiotensin II

Lauten EH et al., Intelligent drug release using molecular imprinting methods. Recognitive systems for angiotensin II.
Journal of Drug Delivery Science and Technology, 19, (6), 391-399, (2009)
   

angiotensin II

Yu ZR et al., Recognition and neutralization of angiotensins I and II using an artificial nanogel receptor fabricated by ligand specificity determinant imprinting.
Chemical Communications, 50, (21), 2728-2731, (2014)
   

angiotensin II

Tan L et al., Antibody-free ultra-high performance liquid chromatography/tandem mass spectrometry measurement of angiotensin I and II using magnetic epitope-imprinted polymers.
Journal of Chromatography A, 1411, 69-76, (2015)
   

angiotensin II

Tan L et al., Molecularly Imprinted Polymer Nanogels Targeting C-Terminal of Angiotensin II for Lowering Blood Pressure of Rats by Oral Perfusion.
Journal of Biomedical Nanotechnology, 13, (9), 1035-1044, (2017)
   

angiotensins

Yu ZR et al., Recognition and neutralization of angiotensins I and II using an artificial nanogel receptor fabricated by ligand specificity determinant imprinting.
Chemical Communications, 50, (21), 2728-2731, (2014)
   

1,4-anhydro-1-deoxy-1-hydroxymethyl(4-isopropyl)phenyl-D-galactopyranose

Lemau de Talancé V et al., First steps towards conformationally selective artificial lectins: the chair-boat discrimination by molecularly imprinted polymers.
Chemical Communications, 48, (86), 10684-10686, (2012)
   

anhydroleucovorin

Kotova K et al., MIP sensors on the way to biotech applications: Targeting selectivity.
Sensors and Actuators B: Chemical, 189, 199-202, (2013)
   

anhydrotetracycline

Mojica ER et al., Tetracycline speciation during molecular imprinting in xerogels results in class-selective binding.
Analyst, 136, (4), 749-755, (2011)
   

aniline

Piletskii SA et al., Formation of matrix polymers sensitive to aniline and phenol.
Russian Journal of Electrochemistry, 30, (9), 1090-1092, (1994)
   

aniline

Zhang HG et al., Preparation of Magnetic Molecularly Imprinted Polymer Microspheres by Suspension Polymerization.
Journal of Functional Polymers, 19-20, (3), 257-261, (2007)
   

aniline

Qi JY et al., Removal of Trace Aniline from Water by Using Molecularly Imprinted Polymers.
China Water & Wastewater, 24, (1), 69-72, (2008)
   

aniline

Huang YH et al., Rapid Removal of Aniline from Contaminated Water by a Novel Polymeric Adsorbent.
Water Environment Research, 86, (1), 20-27, (2014)
   

aniline

Chen NN et al., Molecularly imprinted polymer grafted graphene for simultaneous electrochemical sensing of 4,4-methylene diphenylamine and aniline by differential pulse voltammetry.
Talanta, 132, 155-161, (2015)
   

aniline

Ma PF et al., Surface imprinted polymers for oil denitrification with the combination of computational simulation and multi-template molecular imprinting.
Polymers for Advanced Technologies, 26, (5), 476-486, (2015)
   

anion

Kamata K et al., Size-dependent photochemical anion recognition by ion-templated polyviologen film.
Electrochemistry, 67, (12), 1189-1191, (1999)
   

anionic collagen

Sulaiman Y et al., Chiral acid selectivity displayed by PEDOT electropolymerised in the presence of chiral molecules.
Analyst, 137, (10), 2386-2393, (2012)
   

anions

Chen ZD et al., Application of "Ion Imprinted" Polyaniline Electrode Column Modulated by Potential in the Analysis of Anions.
Journal of Instrumental Analysis, 30, (9), 953-958, (2011)
   

anions

Manesiotis P et al., Polymerisable squaramide receptors for anion binding and sensing.
Journal of Materials Chemistry C, 2, (42), 8990-8995, (2014)
   

anions

Zhu GF et al., Influence of hydrogen bond accepting ability of anions on the adsorption performance of ionic liquid surface molecularly imprinted polymers.
Journal of Chromatography A, 1532, 40-49, (2018)
   

anisodamine

Zeng SM et al., Analysis of Four Tropane Alkaloids in Przewalskia Tangutica Maxim.by Analogous-specific Molecularly Imprinted Solid-phase Extraction Combined with High Performance Liquid Chromatography.
Journal of Instrumental Analysis, 35, (4), 373-379, (2016)
   

anisodine

Guo YS et al., Study on specific solid phase extraction of anticholinergic drugs by molecularly imprinted polymers with structural analogues as templates.
Chinese Journal of Analytical Chemistry, 34, (3), 347-350, (2006)
   

anisodine

Zeng SM et al., Molecularly imprinted polymer for selective extraction and simultaneous determination of four tropane alkaloids from Przewalskia tangutica Maxim. fruit extracts using LC-MS/MS.
RSC Advances, 5, (115), 94997-95006, (2015)
   

anisodine

Zeng SM et al., Analysis of Four Tropane Alkaloids in Przewalskia Tangutica Maxim.by Analogous-specific Molecularly Imprinted Solid-phase Extraction Combined with High Performance Liquid Chromatography.
Journal of Instrumental Analysis, 35, (4), 373-379, (2016)
   

anisole

Imahashi M et al., Concentrating materials covered by molecular imprinted nanofiltration layer with reconfigurability prepared by a surface sol-gel process for gas-selective detection.
Journal of Colloid and Interface Science, 406, 186-195, (2013)
   

annexin A3

Rebelo TSCR et al., Protein Imprinted Material electrochemical sensor for determination of Annexin A3 in biological samples.
Electrochimica Acta, 190, 887-893, (2016)
   

ANP

Wang CY et al., Preparation and Characterization of Molecularly Imprinted Polymeric Nanoparticles for Atrial Natriuretic Peptide (ANP).
Advanced Functional Materials, 21, (23), 4423-4429, (2011)
   

ANP

Kushwaha A et al., Synthesis and characterization of antipyrine-imprinted polymers and their application for sustained release.
Polymer Bulletin, 75, (11), 5235-5252, (2018)
   

ANP

Hou HQ et al., Selective recognition of a cyclic peptide hormone in human plasma by hydrazone bond-oriented surface imprinted nanoparticles.
Analytica Chimica Acta, 1154, Article338301-(2021)
   

ANPs

Lin CY et al., Detection of oxytocin, atrial natriuretic peptide, and brain natriuretic peptide using novel imprinted polymers produced with amphiphilic monomers.
Journal of Peptide Science, 25, (3), Article_e3150-(2019)
   

Ant

Song XL et al., Determination of 16 polycyclic aromatic hydrocarbons in seawater using molecularly imprinted solid-phase extraction coupled with gas chromatography-mass spectrometry.
Talanta, 99, 75-82, (2012)
   

β-antagonists

Kronauer S et al., The Class Selective Extraction of β-Agonists and Antagonists using Molecularly Imprinted Polymer SPE. US Supelco Reporter, 
25, (4), 13-15, (2007)
   

β-antagonists

Kronauer S et al., Class-Selective Extraction and Analysis of β-Receptor Agonists and Antagonists using Molecularly Imprinted Polymer SPE. The Reporter Europe, 
29, 8-10, (2008)
   

anthocyanin

Piacham T et al., Quercetin-imprinted polymer for anthocyanin extraction from mangosteen pericarp.
Materials Science and Engineering: C, 51, 127-131, (2015)
   

anthocyanins

Zhao QY et al., Selective recognition and fast enrichment of anthocyanins by dummy molecularly imprinted magnetic nanoparticles.
Journal of Chromatography A, 1572, 9-19, (2018)
   

anthracene

Hosoya K et al., Selective retention of some polyaromatic hydrocarbons by highly crosslinked polymer networks.
Journal of Polymer Science Part A: Polymer Chemistry, 43, (12), 2556-2566, (2005)
   

anthracene

Chen YC et al., Fluorescence anisotropy studies of molecularly imprinted polymers.
Luminescence, 21, (1), 7-14, (2006)
   

anthracene

Song XL et al., Determination of 16 polycyclic aromatic hydrocarbons in seawater using molecularly imprinted solid-phase extraction coupled with gas chromatography-mass spectrometry.
Talanta, 99, 75-82, (2012)
   

anthracene

Song XL et al., Synthesis,properties and adsorption behavior of double molecularly imprinted polymeric microsphere in seawater.
Environmental Chemistry, 31, (1), 9-15, (2012)
   

anthracene

Hassan S et al., Synthesis and Characterization of Molecularly Imprinted Nanoparticle Polymers for Selective Separation of Anthracene.
Journal of Dispersion Science and Technology, 37, (9), 1241-1251, (2016)
   

anthracene

Khajeh M et al., Magnetic molecularly imprinted polymers-silver nanoparticle based micro-solid phase extraction for the determination of polycyclic aromatic hydrocarbons in water samples.
RSC Advances, 6, (60), 54702-54708, (2016)
   

anthracene

Villar-Navarro M et al., Easy, fast and environmental friendly method for the simultaneous extraction of the 16 EPA PAHs using magnetic molecular imprinted polymers (mag-MIPs).
Journal of Chromatography B, 1044-1045, 63-69, (2017)
   

anthracene

Latif U et al., Conductometric Sensor for PAH Detection with Molecularly Imprinted Polymer as Recognition Layer.
Sensors, 18, (3), ArticleNo767-(2018)
   

anthracene

Mathieu-Scheers E et al., Trace anthracene electrochemical detection based on electropolymerized-molecularly imprinted polypyrrole modified glassy carbon electrode.
Journal of Electroanalytical Chemistry, 848, Article113253-(2019)
   

2-anthracenecaboxylic acid

Yang DH et al., Facile fabrication of molecularly imprinted cavities in spin-coated TiO2 nanofilms.
Chemistry Letters, 34, (12), 1686-1687, (2005)
   

9-anthracenecaboxylic acid

Yang DH et al., Facile fabrication of molecularly imprinted cavities in spin-coated TiO2 nanofilms.
Chemistry Letters, 34, (12), 1686-1687, (2005)
   

2-anthracenecarboxylic acid

Lee SW et al., Regioselective imprinting of anthracenecarboxylic acids onto TiO2 gel ultrathin films: an approach to thin film sensor.
Sensors and Actuators B: Chemical, 104, (1), 35-42, (2005)
   

9-anthracenecarboxylic acid

Lee SW et al., Regioselective imprinting of anthracenecarboxylic acids onto TiO2 gel ultrathin films: an approach to thin film sensor.
Sensors and Actuators B: Chemical, 104, (1), 35-42, (2005)
   

Anthracene-9-carboxylic acid

Liu YT et al., Enhanced photocatalysis on TiO2 nanotube arrays modified with molecularly imprinted TiO2 thin film.
Journal of Hazardous Materials, 182, (1-3), 912-918, (2010)
   

2-anthracenecarboxylic acid

Nakai S et al., Regioselective Molecularly Imprinted Reaction Field for [4 + 4] Photocyclodimerization of 2-Anthracenecarboxylic Acid.
Langmuir, 33, (9), 2103-2108, (2017)
   

anthracene-maleic acid Diels-Alder adduct

Xu ZF et al., Construction and Catalytic Properties of Molecular Imprinting Microreactor on Multiwalled Carbon Nanotubes for Diels-Alder Reaction.
Chemical Journal of Chinese Universities, 32, (5), 1157-1162, (2011)
   

anthracen-9-ylmethyltrimethylammonium bromide

Chen H et al., To Construct "Ion Traps" for Enhancing the Permselectivity and Permeability of Polyelectrolyte Multilayer Films.
Macromolecules, 40, (3), 653-660, (2007)
   

anthracyclines

Zou WY et al., Simultaneous extraction of anthracyclines from urine using water-compatible magnetic nanoparticles with a dummy template coupled with high performance liquid chromatography.
Analytical Methods, 6, (12), 4421-4429, (2014)
   

anthraquinones

Hong YS et al., Extraction of Anthraquinones from Rhubarb by a Molecularly Imprinted-Matrix Solid-Phase Dispersion Method with HPLC Detection.
Analytical Letters, 46, (14), 2235-2252, (2013)
   

anthraquinones

Wu XQ et al., Synthesis and evaluation of dummy molecularly imprinted microspheres for the specific solid-phase extraction of six anthraquinones from slimming tea.
Journal of Separation Science, 38, (8), 1263-1270, (2015)
   

anthrax protective antigen

Tai DF et al., Epitope-Cavities Generated by Molecularly Imprinted Films Measure the Coincident Response to Anthrax Protective Antigen and Its Segments.
Analytical Chemistry, 82, (6), 2290-2293, (2010)
   

9-anthrol

Shughart EL et al., Site selectively templated and tagged xerogels for chemical sensors.
Analytical Chemistry, 78, (9), 3165-3170, (2006)
   

9-anthrol

Bright FV et al., Dynamics Within Site Selectively Templated and Tagged Xerogel Sensor Platforms.
Applied Spectroscopy, 64, (10), 1073-1077, (2010)
   

anti-AFP

Li L et al., Photolithographic Boronate Affinity Molecular Imprinting: A General and Facile Approach for Glycoprotein Imprinting.
Angewandte Chemie International Edition, 52, (29), 7451-7454, (2013)
   

anti-AFP monoclonal IgG

Li L et al., Photolithographic Boronate Affinity Molecular Imprinting: A General and Facile Approach for Glycoprotein Imprinting.
Angewandte Chemie International Edition, 52, (29), 7451-7454, (2013)
   

antibiotic drugs

Szultka M et al., Development of novel molecularly imprinted solid-phase microextraction fibers and their application for the determination of antibiotic drugs in biological samples by SPME-LC/MS<sup>n</sup>.
Analytical and Bioanalytical Chemistry, 403, (3), 785-796, (2012)
   

antibiotics

Sui GQ et al., Synthesis of SERS imprinted membrane based on Ag/ESM with different morphologies for selective detection of antibiotics in aqueous sample.
Optical Materials, 121, Article111581-(2021)
   

antibodies

Björk P et al., Dynamics of complex formation between biological and luminescent conjugated polyelectrolytes - A surface plasmon resonance study.
Biosensors and Bioelectronics, 20, (9), 1764-1771, (2005)
   

antibodies

Narita M et al., Photoinduced Immobilization of Biomolecules on the Surface of Azopolymer Films and Its Dependence on the Concentration and Type of the Azobenzene Moiety.
Macromolecules, 40, (3), 623-629, (2007)
   

antibodies

Moczko E et al., Epitope approach in molecular imprinting of antibodies.
Journal of Chromatography B, 1124, 1-6, (2019)
   

antibody

Uzun L et al., Hepatitis B surface antibody purification with hepatitis B surface antibody imprinted poly(hydroxyethyl methacrylate-N-methacryloyl-l-tyrosine methyl ester) particles.
Journal of Chromatography B, 877, (3), 181-188, (2009)
   

antibody

Ertürk G et al., Fab fragments imprinted SPR biosensor for real-time human immunoglobulin G detection.
Biosensors and Bioelectronics, 28, (1), 97-104, (2011)
   

antibody

Bereli N et al., Oriented immobilized anti-hIgG via Fc fragment-imprinted PHEMA cryogel for IgG purification.
Biomedical Chromatography, 27, (5), 599-607, (2013)
   

antibody

Zhou J et al., A cost-effective sandwich electrochemiluminescence immunosensor for ultrasensitive detection of HIV-1 antibody using magnetic molecularly imprinted polymers as capture probes.
Biosensors and Bioelectronics, 54, 199-206, (2014)
   

antibody replicas

Schirhagl R et al., Chemosensors for Viruses Based on Artificial Immunoglobulin Copies.
Advanced Materials, 22, (18), 2078-2081, (2010)
   

antibody replicas

Schirhagl R et al., Atrazine detection based on antibody replicas.
Journal of Materials Chemistry, 21, (38), 14594-14598, (2011)
   

(anti-CCP

Dibekkaya H et al., Surface plasmon resonance sensors for real-time detection of cyclic citrullinated peptide antibodies.
Journal of Macromolecular Science, Part A, 53, (9), 585-594, (2016)
   

anticholinergic drugs

Guo YS et al., Liquid chromatographic behavior of molecularly imprinted polymers with anticholinergic drugs as template.
Pharmaceutical Care and Research, 7, (4), 249-252, (2007)
   

antiepileptics

Hoshina K et al., Molecularly imprinted polymers for simultaneous determination of antiepileptics in river water samples by liquid chromatography-tandem mass spectrometry.
Journal of Chromatography A, 1216, (25), 4957-4962, (2009)
   

anti-HB

Asliyuce S et al., Molecular imprinting based composite cryogel membranes for purification of anti-hepatitis B surface antibody by fast protein liquid chromatography.
Journal of Chromatography B, 889-890, (1), 95-102, (2012)
   

anti-HIV-1

Zhou J et al., A cost-effective sandwich electrochemiluminescence immunosensor for ultrasensitive detection of HIV-1 antibody using magnetic molecularly imprinted polymers as capture probes.
Biosensors and Bioelectronics, 54, 199-206, (2014)
   

anti-HIV drugs

Prasad BB et al., Molecularly imprinted polymer-based core-shells (solid vs hollow) @ pencil graphite electrode for electrochemical sensing of certain anti-HIV drugs.
Sensors and Actuators B: Chemical, 244, 167-174, (2017)
   

anti-insulin antibodies

Schirhagl R et al., Comparing biomimetic and biological receptors for insulin sensing.
Chemical Communications, (46), 3128-3130, (2010)
   

anti-insulin IgG

Schirhagl R et al., Comparing biomimetic and biological receptors for insulin sensing.
Chemical Communications, (46), 3128-3130, (2010)
   

antimony ion

Fan HT et al., Selective removal of antimony(III) from aqueous solution using antimony(III)-imprinted organic-inorganic hybrid sorbents by combination of surface imprinting technique with sol-gel process.
Chemical Engineering Journal, 258, 146-156, (2014)
   

antimony ion

Fan HT et al., Selective adsorption of antimony(III) from aqueous solution by ion-imprinted organic-inorganic hybrid sorbent: Kinetics, isotherms and thermodynamics.
Journal of the Taiwan Institute of Chemical Engineers, 45, (5), 2640-2648, (2014)
   

antimony ion

Shakerian F et al., Synthesis and characterisation of nano-pore antimony imprinted polymer and its use in the extraction and determination of antimony in water and fruit juice samples.
Food Chemistry, 145, 571-577, (2014)
   

antimony ion

Zhang D et al., Hydrothermal-assisted derived ion-imprinted sorbent for preconcentration of antimony(III) in water samples.
Separation Science and Technology, 52, (12), 1938-1945, (2017)
   

Antimony ion

Fang LL et al., Highly Selective Adsorption of Antimonite by Novel Imprinted Polymer with Microdomain Confinement Effect.
Journal of Chemical & Engineering Data, 63, (5), 1513-1523, (2018)
   

antimony ion

Zhang D et al., Sb(III)-Imprinted Organic-Inorganic Hybrid Sorbent Prepared by Hydrothermal-Assisted Surface Imprinting Technique for Selective Adsorption of Sb(III).
Russian Journal of Physical Chemistry A, 92, (3), 575-581, (2018)
   

antioxidants

dos Santos Moretti E et al., Synthesis of Surface Molecularly Imprinted Poly(methacrylic acid-hemin) on Carbon Nanotubes for the Voltammetric Simultaneous Determination of Antioxidants from Lipid Matrices and Biodiesel.
Electrochimica Acta, 212, 322-332, (2016)
   

antiplatelet active ingredients

Huang MX et al., A target analogue imprinted polymer for the recognition of antiplatelet active ingredients in Radix Salviae Miltiorrhizae by LC/MS/MS.
Journal of Pharmaceutical and Biomedical Analysis, 58, (1), 12-18, (2012)
   

antipyrine

Kushwaha A et al., Synthesis and characterization of antipyrine-imprinted polymers and their application for sustained release.
Polymer Bulletin, 75, (11), 5235-5252, (2018)
   

ANTs

Zou WY et al., Simultaneous extraction of anthracyclines from urine using water-compatible magnetic nanoparticles with a dummy template coupled with high performance liquid chromatography.
Analytical Methods, 6, (12), 4421-4429, (2014)
   

ANXA3

Rebelo TSCR et al., Protein Imprinted Material electrochemical sensor for determination of Annexin A3 in biological samples.
Electrochimica Acta, 190, 887-893, (2016)
   

AO

Kébir N et al., Chemically modified polysulfones for molecular imprinting. Synthesis and complexation with a fluorescent model template.
Reactive and Functional Polymers, 73, (3), 531-539, (2013)
   

AO2

Wei SL et al., Study and Application of Acid Orange II Sensor Based on Molecularly Imprinted Electropolymerized Membrane.
Journal of Instrumental Analysis, 33, (6), 683-687, (2014)
   

AOH

Abou-Hany RAG et al., Tailoring molecularly imprinted polymer beads for alternariol recognition and analysis by a screening with mycotoxin surrogates.
Journal of Chromatography A, 1425, 231-239, (2015)
   

AOH

Rico-Yuste A et al., Analysis of alternariol and alternariol monomethyl ether in foodstuffs by molecularly imprinted solid-phase extraction and ultra-high-performance liquid chromatography tandem mass spectrometry.
Food Chemistry, 243, 357-364, (2018)
   

AO II

Shang JB et al., Preparation and selective adsorption of organic pollutants by an inorganic molecular imprinted polymer.
Water Science And Technology, 74, (5), 1193-1201, (2016)
   

AβOs

You M et al., A novel electrochemical biosensor with molecularly imprinted polymers and aptamer-based sandwich assay for determining amyloid-β oligomer.
Journal of Electroanalytical Chemistry, 862, Article114017-(2020)
   

4AP

Lai JP et al., Study on recognition mechanism of molecularly imprinted microsphere synthesized from aqueous solution.
Acta Chimica Sinica, 60, (2), 322-327, (2002)
   

4-AP

Yan WY et al., Preparation of 4-aminopyridine imprinted polymer-based monolithic capillary column and evaluation of electrochromatography.
Chemical Journal of Chinese Universities, 24, (6), 1026-1030, (2003)
   

2-AP

Najafi M et al., Molecularly imprinted polymer-based potentiometric sensor for 2-aminopyridine as a potential impurity in piroxicam.
Drug Testing and Analysis, 3, (2), 132-137, (2011)
   

AP

Rezaei B et al., Nanolayer treatment to realize suitable configuration for electrochemical allopurinol sensor based on molecular imprinting recognition sites on multiwall carbon nanotube surface.
Sensors and Actuators B: Chemical, 160, (1), 99-104, (2011)
   

AP

Liu JM et al., A highly selective affinity adsorption imprinting phosphorescence sensor for determination of trace alkaline phosphatase and prediction of human diseases.
Sensors and Actuators B: Chemical, 186, 521-527, (2013)
   

AP

Yarman A et al., Coupling Biocatalysis with Molecular Imprinting in a Biomimetic Sensor.
Angewandte Chemie International Edition, 52, (44), 11521-11525, (2013)
   

2AP

Székely G et al., Molecularly imprinted organic solvent nanofiltration membranes - Revealing molecular recognition and solute rejection behaviour.
Reactive and Functional Polymers, 86, 215-224, (2015)
   

AP

Menon S et al., A voltammetric sensor for acetaminophen based on electropolymerized-molecularly imprinted poly(o-aminophenol) modified gold electrode.
Talanta, 179, 668-675, (2018)
   

AP

Sun YF et al., A selective molecularly imprinted electrochemical sensor with GO@COF signal amplification for the simultaneous determination of sulfadiazine and acetaminophen.
Sensors and Actuators B: Chemical, 300, Article126993-(2019)
   

AP

Su CL et al., A highly sensitive sensor based on a computer-designed magnetic molecularly imprinted membrane for the determination of acetaminophen.
Biosensors and Bioelectronics, 148, Article111819-(2020)
   

4-AP

Fallah-Darrehchi M et al., Conductive conduit based on electrospun poly (l-lactide-co-D, l-lactide) nanofibers containing 4-aminopyridine-loaded molecularly imprinted poly (methacrylic acid) nanoparticles used for peripheral nerve regeneration.
International Journal of Biological Macromolecules, 190, 499-507, (2021)
   

1-Ap

Nadali A et al., Synthesize and application of magnetic molecularly imprinted polymers (mag-MIPs) to extract 1-Aminopyrene from the human urine sample.
Journal of Environmental Chemical Engineering, 9, (5), Article106253-(2021)
   

APA

Diaz-Faes Lopez T et al., Controlled Release of Nafcillin Using Biocompatible "Dummy" Molecularly Imprinted Sol-Gel Nanospheres.
Current Topics in Medicinal Chemistry, 15, (3), 262-270, (2015)
   

6-APA

Wang P et al., Application of 6-APA molecular imprinted solid-phase extraction column in the detection of penicillins in milk.
Food and Fermentation Industries, 42, (4), 183-188, (2016)
   

apamin

Zhang Y et al., Active Targeting of Tumors through Conformational Epitope Imprinting.
Angewandte Chemie International Edition, 54, (17), 5157-5160, (2015)
   

APAP

Cervini P et al., Evaluation of the Analytical Potentialities of a Composite Electrode Modified with Molecularly Imprinted Polymers.
Analytical Letters, 42, (13), 1940-1957, (2009)
   

APE1

Zhao MH et al., Construction of Specific and Reversible Nanoreceptors for Proteins via Sequential Surface-Imprinting Strategy.
Analytical Chemistry, 92, (15), 10540-10547, (2020)
   

4-APh

Santos W et al., A catalytically active molecularly imprinted polymer that mimics peroxidase based on hemin: application to the determination of p-aminophenol.
Analytical and Bioanalytical Chemistry, 389, (6), 1919-1929, (2007)
   

4-APh

Santos WJR et al., Synthesis, Characterization and Kinetics of Catalytically Active Molecularly Imprinted Polymers for the Selective Recognition of 4-Aminophenol.
Journal of the Brazilian Chemical Society, 20, (5), 820-825, (2009)
   

4-APh

Neto JdRM et al., A hemin-based molecularly imprinted polymer (MIP) grafted onto a glassy carbon electrode as a selective sensor for 4-aminophenol amperometric.
Sensors and Actuators B: Chemical, 152, (2), 220-225, (2011)
   

API

He M et al., Preparation and imprinting efficiency evaluation of molecularly imprinted polymer of apigenin.
Ion Exchange and Adsorption, 26, (6), 514-523, (2010)
   

API

Baeza AN et al., Multiresidue analysis of cephalosporin antibiotics in bovine milk based on molecularly imprinted polymer extraction followed by liquid chromatography-tandem mass spectrometry.
Journal of Chromatography A, 1474, 121-129, (2016)
   

apigenin

Guo LF et al., Study on the non-covalent interaction of apigenin molecularly imprinted polymers by spectrometry.
Chinese Journal of Reactive Polymers, 17, (2), 66-73, (2008)
   

apigenin

Li LL et al., Preparation and spectral characterization of apigenin molecularly imprinted polymer.
Acta Pharmaceutica Sinica, 44, (8), 868-872, (2009)
   

apigenin

He M et al., Preparation and imprinting efficiency evaluation of molecularly imprinted polymer of apigenin.
Ion Exchange and Adsorption, 26, (6), 514-523, (2010)
   

apigenin

He MQ et al., Recognition property and mechanism of molecularly imprinted polymers of Apigenin.
Journal of Jiangsu University (Natural Science Edition), 31, (5), 596-600, (2010)
   

apigenin

Gao D et al., In Vivo Selective Capture and Rapid Identification of Luteolin and Its Metabolites in Rat Livers by Molecularly Imprinted Solid-Phase Microextraction.
Journal of Agricultural and Food Chemistry, 65, (6), 1158-1166, (2017)
   

Apple Stem Pitting Virus

Bai W et al., A Double-Imprinted Diffraction-Grating Sensor Based on a Virus-Responsive Super-Aptamer Hydrogel Derived from an Impure Extract.
Angewandte Chemie International Edition, 53, (8), 2095-2098, (2014)
   

aproxen

Renkecz T et al., Molecularly imprinted microspheres prepared by precipitation polymerization at high monomer concentrations.
Molecular Imprinting, 2, (1), 1-17, (2014)
   

aptamer

Evtugyn G et al., Molecularly Imprinted Polymerized Methylene Green as a Platform for Electrochemical Sensing of Aptamer-Thrombin Interactions.
Electroanalysis, 21, (11), 1272-1277, (2009)
   

apurinic/apyrimidinic endonuclease/redox effector factor 1

Zhao MH et al., Construction of Specific and Reversible Nanoreceptors for Proteins via Sequential Surface-Imprinting Strategy.
Analytical Chemistry, 92, (15), 10540-10547, (2020)
   

2-apy

Cummins W et al., A comparative study of the potential of acrylic and sol-gel polymers for molecular imprinting.
Analytica Chimica Acta, 542, (1), 52-60, (2005)
   

2-apy

Cummins W et al., Systematic cross-selectivity study of the factors influencing template receptor interactions in molecularly imprinted nitrogen heterocycles.
Biosensors and Bioelectronics, 22, (3), 372-380, (2006)
   

3-apy

Cummins W et al., Systematic cross-selectivity study of the factors influencing template receptor interactions in molecularly imprinted nitrogen heterocycles.
Biosensors and Bioelectronics, 22, (3), 372-380, (2006)
   

4-apy

Cummins W et al., Systematic cross-selectivity study of the factors influencing template receptor interactions in molecularly imprinted nitrogen heterocycles.
Biosensors and Bioelectronics, 22, (3), 372-380, (2006)
   

2-apy

Holland N et al., Thermal desorption characterisation of molecularly imprinted polymers. Part II: Use of direct probe GC-MS analysis to study crosslinking effects.
Analytical and Bioanalytical Chemistry, 391, (4), 1245-1253, (2008)
   

2-apy

Holland N et al., The influence of polymer morphology on the performance of molecularly imprinted polymers.
Polymer, 51, (7), 1578-1584, (2010)
   

Apy

Liu XY et al., Investigation of selective molecular interactions using two-dimensional Fourier transform IR spectroscopy.
Analytical and Bioanalytical Chemistry, 397, (1), 339-343, (2010)
   

Apy

Liu XY et al., Recognition ability of temperature responsive molecularly imprinted polymer hydrogels.
Soft Matter, 7, (5), 1986-1993, (2011)
   

APZ

Song YP et al., Dummy template molecularly imprinted polymer for solid phase extraction of phenothiazines in meat based on computational simulation.
Food Chemistry, 233, 422-428, (2017)
   

2-AQ

Zhang TL et al., Evaluation of aminoquinoline-imprinted polymers and the recognition mechanism.
Journal of Applied Polymer Science, 129, (6), 3447-3453, (2013)
   

3-AQ

Zhang TL et al., Evaluation of aminoquinoline-imprinted polymers and the recognition mechanism.
Journal of Applied Polymer Science, 129, (6), 3447-3453, (2013)
   

8-AQ

Zhang TL et al., Evaluation of aminoquinoline-imprinted polymers and the recognition mechanism.
Journal of Applied Polymer Science, 129, (6), 3447-3453, (2013)
   

AQPs

Xie WY et al., An aquaporin-based vesicle-embedded polymeric membrane for low energy water filtration.
Journal of Materials Chemistry A, 1, (26), 7592-7600, (2013)
   

AQPz

Xie WY et al., An aquaporin-based vesicle-embedded polymeric membrane for low energy water filtration.
Journal of Materials Chemistry A, 1, (26), 7592-7600, (2013)
   

aquaporins

Xie WY et al., An aquaporin-based vesicle-embedded polymeric membrane for low energy water filtration.
Journal of Materials Chemistry A, 1, (26), 7592-7600, (2013)
   

Aquaporin Z

Xie WY et al., An aquaporin-based vesicle-embedded polymeric membrane for low energy water filtration.
Journal of Materials Chemistry A, 1, (26), 7592-7600, (2013)
   

AR

Fan LL et al., Removal of alizarin red from water environment using magnetic chitosan with Alizarin Red as imprinted molecules.
Colloids and Surfaces B: Biointerfaces, 91, (1), 250-257, (2012)
   

AR

Gao BJ et al., Designing and preparing of acid dye surface-imprinted material for effective removal of acid dyes from water.
Journal of Environmental Chemical Engineering, 3, (1), 277-285, (2015)
   

AR

Hashemi SH et al., Application of response surface methodology to optimize pipette tip micro-solid phase extraction of dyes from seawater by molecularly imprinted polymer and their determination by HPLC.
Journal of the Iranian Chemical Society, 16, (12), 2613-2627, (2019)
   

AR

Kim HS et al., Preparation and release properties of arbutin imprinted inulin/polyvinyl alcohol biomaterials.
International Journal of Biological Macromolecules, 161, 763-770, (2020)
   

arabitol

Beluomini MA et al., Tailor-made 3D-nanoelectrode ensembles modified with molecularly imprinted poly(o-phenylenediamine) for the sensitive detection of L-arabitol.
Sensors and Actuators B: Chemical, 284, 250-257, (2019)
   

Ara-C

Prasad BB et al., Gold nanorods vs. gold nanoparticles: application in electrochemical sensing of cytosine β-d-arabinoside using metal ion mediated molecularly imprinted polymer.
RSC Advances, 6, (84), 80679-80691, (2016)
   

arachidonic acid

Ambaw YA et al., Tailored Polymer-Based Selective Extraction of Lipid Mediators from Biological Samples.
Metabolites, 11, (8), ArticleNo539-(2021)
   

ARB

Masumoto S et al., Molecularly imprinted polymers for arbutin and rutin by modified precipitation polymerization and their application for selective extraction of rutin in nutritional supplements.
Journal of Pharmaceutical and Biomedical Analysis, 205, Article114294-(2021)
   

arbutin

Kim HS et al., Preparation and release properties of arbutin imprinted inulin/polyvinyl alcohol biomaterials.
International Journal of Biological Macromolecules, 161, 763-770, (2020)
   

arbutin

Masumoto S et al., Molecularly imprinted polymers for arbutin and rutin by modified precipitation polymerization and their application for selective extraction of rutin in nutritional supplements.
Journal of Pharmaceutical and Biomedical Analysis, 205, Article114294-(2021)
   

arcinomaembryonic antigen

Lai YX et al., Molecular Imprinting Polymers Electrochemical Sensor Based on AuNPs/PTh Modified GCE for Highly Sensitive Detection of Carcinomaembryonic Antigen.
Journal of Biomedical Nanotechnology, 14, (10), 1688-1694, (2018)
   

aresenate ion

Cawrse BM et al., Field portable arsenic sensor.
Abstracts of Papers of the American Chemical Society, 229, (ANYL), 390-390, (2005)
   

Arg

Ingole PG et al., Enantiomeric separation of α-amino acids by imprinted terpolymer membrane.
Arabian Journal of Chemistry, 9, (Supplement 2), S960-S965, (2016)
   

Arg-Gly-Asp

Papaioannou E et al., Synthetic polymers that mimic the RGD ligands as stationary phases for their selective separation.
Amino Acids, 33, (3), XXVIII-XXVIII, (2007)
   

Arg-Gly-Asp

Papaioannou E et al., Molecularly imprinted polymers for RGD selective recognition and separation.
Amino Acids, 36, (3), 563-569, (2009)
   

arg-gly-asp

Gupta N et al., A Highly Sensitive and Selective Piezoelectric Molecularly Imprinted Sensor for RGD Peptides.
Sensor Letters, 14, (6), 616-622, (2016)
   

Arg-Gly-Asp

Pan GQ et al., An Epitope-Imprinted Biointerface with Dynamic Bioactivity for Modulating Cell-Biomaterial Interactions.
Angewandte Chemie International Edition, 56, (50), 15959-15963, (2017)
   

arginine

Lacasta S et al., Chiral Imprinting with Amino Acids of Ordered Mesoporous Silica Exhibiting Enantioselectivity after Calcination.
Chemistry of Materials, 23, (5), 1280-1287, (2011)
   

arginine

Roy E et al., Development of an imprinted polymeric sensor with dual sensing property for trace level estimation of zinc and arginine.
Materials Science and Engineering: C, 49, 25-33, (2015)
   

arginine

Ingole PG et al., Enantiomeric separation of α-amino acids by imprinted terpolymer membrane.
Arabian Journal of Chemistry, 9, (Supplement 2), S960-S965, (2016)
   

[arginine]-microcystins

Mbukwa EA et al., Preparation of guanidinium terminus-molecularly imprinted polymers for selective recognition and solid-phase extraction (SPE) of [arginine]-microcystins.
Analytical and Bioanalytical Chemistry, 405, (12), 4253-4267, (2013)
   

aripiprazole

Gajda M et al., Low-oxidation-potential thiophene-carbazole monomers for electro-oxidative molecular imprinting: Selective chemosensing of aripiprazole.
Biosensors and Bioelectronics, 169, Article112589-(2020)
   

aristolochic acid

Zhang YM et al., Preparation of molecularly imprinted polymers-functionalized silica nanoparticles for the separation and recognition of aristolochic acids.
Chinese Journal of Chromatography, 39, (10), 1137-1145, (2021)
   

aristolochic acid I

Ge YH et al., Selective analysis of aristolochic acid I in herbal medicines by dummy molecularly imprinted solid-phase extraction and HPLC.
Journal of Separation Science, 40, (13), 2791-2799, (2017)
   

aristolochic acid I

Xiao YH et al., Preparation and adsorption properties of molecularly imprinted polymer via RAFT precipitation polymerization for selective removal of aristolochic acid I.
Talanta, 162, 415-422, (2017)
   

aristolochic acid I

Fang LW et al., Isolation of aristolochic acid I from herbal plant using molecular imprinted polymer composited ionic liquid-based zeolitic imidazolate framework-67.
Journal of Separation Science, 42, (19), 3047-3053, (2019)
   

aristolochic acid I

Li F et al., Preparation of magnetic molecularly imprinted polymers functionalized carbon nanotubes for highly selective removal of aristolochic acid.
Journal of Chromatography A, 1602, 168-177, (2019)
   

aristolochic acid I

Wang LH et al., Dummy molecularly imprinted silica materials for effective removal of aristolochic acid I from kaempfer dutchmanspipe root extract.
Microchemical Journal, 152, Article104463-(2020)
   

aristolochic acid I

Ye JP et al., Molecularly imprinted ratiometric fluorescent probe for visual and fluorescent determination of aristolochic acid I based on a Schiff-base fluorescent compound.
Microchimica Acta, 187, (11), Article623-(2020)
   

aristolochic acid I

Zhang YM et al., Preparation of molecularly imprinted polymers-functionalized silica nanoparticles for the separation and recognition of aristolochic acids.
Chinese Journal of Chromatography, 39, (10), 1137-1145, (2021)
   

aristolochic acid I

Xiong HH et al., Thermosensitive and magnetic molecularly imprinted polymers for selective recognition and extraction of aristolochic acid I.
Food Chemistry, 372, Article131250-(2022)
   

aristolochic acids

Ge YH et al., Combined magnetic porous molecularly imprinted polymers and deep eutectic solvents for efficient and selective extraction of aristolochic acid I and II from rat urine.
Materials Science and Engineering: C, 97, 650-657, (2019)
   

armillarisin A

Wu ZY et al., Preparation of molecularly imprinted polymer and their recognition for armillarisin A.
Chemical Engineer, 22, (9), 48-49,59, (2008)
   

Armillarisin A

Su LQ et al., Synthesis and evaluation of Armillarisin A -imprinted polymer on silica surface.
Chemistry Bulletin, 72, (8), 749-753, (2009)
   

ARN tetraprotic acids

Putman JC et al., Screening Petroleum Crude Oils for ARN Tetraprotic Acids with Molecularly Imprinted Polymers.
Energy & Fuels, 30, (7), 5651-5655, (2016)
   

aromatic amines

Yu JJ et al., Determination of urinary aromatic amines in smokers and nonsmokers using a MIPs-SPE coupled with LC-MS/MS method.
Journal of Chromatography B, 958, 130-135, (2014)
   

aromatic amines

Yu XL et al., Magnetic molecularly imprinted polymer nanoparticles for separating aromatic amines from azo dyes - Synthesis, characterization and application.
Separation and Purification Technology, 204, 213-219, (2018)
   

aromatic hydrocarbons

Hwang MJ et al., Preparation of Molecularly Imprinted Polymers for the Detection of Aromatic Hydrocarbons.
Journal of Nanoscience and Nanotechnology, 11, (8), 7206-7209, (2011)
   

Ars

Wu YL et al., Fabrication and evaluation of molecularly imprinted regenerated cellulose composite membranes via atom transfer radical polymerization.
Chinese Chemical Letters, 25, (2), 273-278, (2014)
   

Ars

Wu YL et al., Efficient one-pot synthesis of artemisinin-imprinted membrane by direct surface-initiated AGET-ATRP.
Separation and Purification Technology, 131, 117-125, (2014)
   

Ars

Wu YL et al., Fabrication and Evaluation of Artemisinin-Imprinted Composite Membranes by Developing a Surface Functional Monomer-Directing Prepolymerization System.
Langmuir, 30, (49), 14789-14796, (2014)
   

Ars

Wu YL et al., Bio-inspired adhesion: Fabrication of molecularly imprinted nanocomposite membranes by developing a hybrid organic-inorganic nanoparticles composite structure.
Journal of Membrane Science, 490, 169-178, (2015)
   

Ars

Cui JY et al., Bio-inspired synthesis of molecularly imprinted nanocomposite membrane for selective recognition and separation of artemisinin.
Journal of Applied Polymer Science, 133, (19), ArticleNo43405-(2016)
   

Ars

Huang HL et al., Multifunctional Magnetic Cellulose Surface-Imprinted Microspheres for Highly Selective Adsorption of Artesunate.
ACS Sustainable Chemistry & Engineering, 4, (6), 3334-3343, (2016)
   

arsanilic acid

Sun HW et al., On-line solid-phase extraction of arsanilic acid from water with arsanilic acid imprinted monolith.
Chemical Journal on Internet, 8, (6), (2006)
   

arsenate

Tsoi YK et al., Selective recognition of arsenic by tailoring ion-imprinted polymer for ICP-MS quantification.
Talanta, 89, (1), 162-168, (2012)
   

arsenate

Pan MH et al., Synthesis of Magnetic As(V)-Imprinted Polymers and Their Adsorption Performances for Arsenate in Water Solutions.
Fresenius Environmental Bulletin, 23, (1), 122-129, (2014)
   

arsenate

Roy E et al., A single solution for arsenite and arsenate removal from drinking water using cysteine@ZnS:TiO2 nanoparticle modified molecularly imprinted biofouling-resistant filtration membrane.
Chemical Engineering Journal, 304, 259-270, (2016)
   

arsenate

Perera R et al., The binding of metal ions to molecularly-imprinted polymers.
Water Science And Technology, 75, (7), 1643-1650, (2017)
   

arsenate anion

Gao BJ et al., Preparation of Arsenate Anion Surface-Imprinted Material IIP-PDMC/SiO2 and Study on Its Ion Recognition Property.
Industrial & Engineering Chemistry Research, 52, (23), 7651-7659, (2013)
   

arsenate ion

Proceeding, Pan MH et al, Selective Removal of As(V) from Aqueous Solutions Using Magnetic As(V)-Imprinted Polymers with Combination of Two Functional Monomers, 
In: Applied Mechanics and Materials, Hegde G (Ed.), 495-498, (2014)
   

arsenic

Ashraf S et al., Imprinted polymers for the removal of heavy metal ions from water.
Water Science And Technology, 64, (6), 1325-1332, (2011)
   

Arsenic

Proceeding, Kalita H et al, Novel Arsenic Ion-Imprinted Polymer: Simultaneous Removal As(III) and As(V) from Water, 
Beighley REII, Kilgore MW (Eds.), 356, (2011)
   

Arsenic

Liu BJ et al., Removal of arsenic from Laminaria japonica Aresch juice using As(III)-imprinted chitosan resin.
European Food Research and Technology, 232, (5), 911-917, (2011)
   

arsenic

Fan HT et al., Selective Removal of Arsenic(V) from Aqueous Solution Using A Surface-Ion-Imprinted Amine-Functionalized Silica Gel Sorbent.
Industrial & Engineering Chemistry Research, 51, (14), 5216-5223, (2012)
   

arsenic

Önnby L et al., Polymer composite adsorbents using particles of molecularly imprinted polymers or aluminium oxide nanoparticles for treatment of arsenic contaminated waters.
Water Research, 46, (13), 4111-4120, (2012)
   

arsenic

Pan MH et al., Synthesis of Magnetic As(V)-Imprinted Polymers and Their Adsorption Performances for Arsenate in Water Solutions.
Fresenius Environmental Bulletin, 23, (1), 122-129, (2014)
   

arsenic

Roy E et al., A single solution for arsenite and arsenate removal from drinking water using cysteine@ZnS:TiO2 nanoparticle modified molecularly imprinted biofouling-resistant filtration membrane.
Chemical Engineering Journal, 304, 259-270, (2016)
   

Arsenic

Bektas H et al., Development of ion-imprinted cryogels for selective removal of arsenic from environmental waters.
Biointerface Research in Applied Chemistry, 9, (4), 4119-4125, (2019)
   

arsenic

Jinadasa KK et al., Ionic imprinted polymer - Vortex-assisted dispersive micro-solid phase extraction for inorganic arsenic speciation in rice by HPLC-ICP-MS.
Talanta, 220, Article121418-(2020)
   

arsenic

Jinadasa KK et al., Ionic imprinted polymer solid-phase extraction for inorganic arsenic selective pre-concentration in fishery products before high-performance liquid chromatography - inductively coupled plasma-mass spectrometry speciation.
Journal of Chromatography A, 1619, Article460973-(2020)
   

arsenic

Kisomi AS et al., Application of [mu]-TLC for speciation of inorganic arsenic by laser ablation inductively coupled plasma mass spectrometry.
Microchemical Journal, 159, Article105443-(2020)
   

Arsenic

Chi ZF et al., Selective removal of As(III) using magnetic graphene oxide ion-imprinted polymer in porous media: Potential effect of external magnetic field.
Journal of Environmental Chemical Engineering, 9, (4), Article105671-(2021)
   

arsenic ion

Proceeding, Jahantigh N, Molecular Imprinted Polymer (MIP) for arsenic extraction from environmental water and biological samples, 
Collery P, Maynard I, Theophanides T, Khassanova L, Collery T (Eds.), 247-251, (2008)
   

arsenic ion

Liu BJ et al., As(III) removal from aqueous solution using α-Fe2O3 impregnated chitosan beads with As(III) as imprinted ions.
Desalination, 272, (1-3), 286-292, (2011)
   

arsenic ion

Liu BJ et al., Adsorption behavior of As(III) onto chitosan resin with As(III) as template ions.
Journal of Applied Polymer Science, 125, (1), 246-253, (2012)
   

arsenic ion

Tsoi YK et al., Selective recognition of arsenic by tailoring ion-imprinted polymer for ICP-MS quantification.
Talanta, 89, (1), 162-168, (2012)
   

arsenic ion

Alizadeh T et al., Synthesis of nano-sized arsenic-imprinted polymer and its use as As3+ selective ionophore in a potentiometric membrane electrode: Part 1.
Analytica Chimica Acta, 843, 7-17, (2014)
   

arsenic ion

Zhu LY et al., Synthesis of As(V)-Cr(III) Co-Imprinted Polymer and Its Adsorption Performance for Arsenate Species.
Separation Science and Technology, 49, (10), 1584-1591, (2014)
   

arsenic ion

Alizadeh T et al., Improvement of durability and analytical characteristics of arsenic-imprinted polymer-based PVC membrane electrode via surface modification of nano-sized imprinted polymer particles: part 2.
Electrochimica Acta, 178, 877-885, (2015)
   

arsenic ion

Mafu LD et al., Synthesis and characterization of ion imprinted polymeric adsorbents for the selective recognition and removal of arsenic and selenium in wastewater samples.
Journal of Saudi Chemical Society, 20, (5), 594-605, (2016)
   

arsenic ion

Song XL et al., Effective and selective adsorption of As(III) via imprinted magnetic Fe3O4/HTCC composite nanoparticles.
Journal of Environmental Chemical Engineering, 5, (1), 16-25, (2017)
   

arsenic ion

Mustafai FA et al., Microwave-assisted synthesis of imprinted polymer for selective removal of arsenic from drinking water by applying Taguchi statistical method.
European Polymer Journal, 109, 133-142, (2018)
   

arsenic ion

Ma WW et al., Novel electrochemical sensing platform based on ion imprinted polymer with nanoporous gold for ultrasensitive and selective determination of As3+.
Microchimica Acta, 187, (10), Article571-(2020)
   

arsenic ions

Jinadasa KK et al., Synthesis and application of a surface ionic imprinting polymer on silica-coated Mn-doped ZnS quantum dots as a chemosensor for the selective quantification of inorganic arsenic in fish.
Analytical and Bioanalytical Chemistry, 412, (7), 1663-1673, (2020)
   

arsenite

Roy E et al., A single solution for arsenite and arsenate removal from drinking water using cysteine@ZnS:TiO2 nanoparticle modified molecularly imprinted biofouling-resistant filtration membrane.
Chemical Engineering Journal, 304, 259-270, (2016)
   

arsenite anion

Fang LL et al., Development of an anion imprinted polymer for high and selective removal of arsenite from wastewater.
Science of The Total Environment, 639, 110-117, (2018)
   

arsenite ion

Cawrse BM et al., Field portable arsenic sensor.
Abstracts of Papers of the American Chemical Society, 229, (ANYL), 390-390, (2005)
   

ART

Bai HP et al., A novel sensitive electrochemical sensor based on in-situ polymerized molecularly imprinted membranes at graphene modified electrode for artemisinin determination.
Biosensors and Bioelectronics, 64, 352-358, (2015)
   

artemesinin

Li XY et al., Study on recognition properties of artemisinin molecular imprinted polymer.
Chinese Traditional and Herbal Drugs, 43, (4), 795-798, (2012)
   

artemesinin

Zhou J et al., Sensitive Artemisinin Electrochemical Sensor Based on Polymerized Molecularly Imprinted Membranes.
International Journal of Electrochemical Science, 11, 3114-3122, (2016)
   

artemether

Arshad U et al., Molecularly imprinted polymeric coatings for sensitive and selective gravimetric detection of artemether.
RSC Advances, 10, (57), 34355-34363, (2020)
   

artemisinin

Gong XY et al., Preparation of molecularly imprinted polymers for artemisinin based on the surfaces of silica gel.
Journal of Biotechnology, 153, (1-2), 8-14, (2011)
   

artemisinin

Yang BJ et al., Synthesis of the artemisinin-imprinting polymers on silica surface and its adsorption behavior in supercritical CO2 fluid.
AIChE Journal, 57, (12), 3514-3521, (2011)
   

artemisinin

Xie JQ et al., Synthesis and Application of Molecularly Imprinted Polymer on Selective Solid-Phase Extraction for the Determination of Artemisinin in Artemisia Annua L.
Analytical Letters, 46, (1), 107-119, (2013)
   

artemisinin

Wu YL et al., Fabrication and evaluation of molecularly imprinted regenerated cellulose composite membranes via atom transfer radical polymerization.
Chinese Chemical Letters, 25, (2), 273-278, (2014)
   

artemisinin

Wu YL et al., Efficient one-pot synthesis of artemisinin-imprinted membrane by direct surface-initiated AGET-ATRP.
Separation and Purification Technology, 131, 117-125, (2014)
   

artemisinin

Wu YL et al., Fabrication and Evaluation of Artemisinin-Imprinted Composite Membranes by Developing a Surface Functional Monomer-Directing Prepolymerization System.
Langmuir, 30, (49), 14789-14796, (2014)
   

artemisinin

Bai HP et al., A novel sensitive electrochemical sensor based on in-situ polymerized molecularly imprinted membranes at graphene modified electrode for artemisinin determination.
Biosensors and Bioelectronics, 64, 352-358, (2015)
   

artemisinin

Wu YL et al., Bio-inspired adhesion: Fabrication of molecularly imprinted nanocomposite membranes by developing a hybrid organic-inorganic nanoparticles composite structure.
Journal of Membrane Science, 490, 169-178, (2015)
   

artemisinin

Cui JY et al., Bio-inspired synthesis of molecularly imprinted nanocomposite membrane for selective recognition and separation of artemisinin.
Journal of Applied Polymer Science, 133, (19), ArticleNo43405-(2016)
   

artemisinin

Waffo AFT et al., Fully electrochemical MIP sensor for artemisinin.
Sensors and Actuators B: Chemical, 275, 163-173, (2018)
   

artemisinin

Zhang YQ et al., Fabrication of Multilayered Molecularly Imprinted Membrane for Selective Recognition and Separation of Artemisinin.
ACS Sustainable Chemistry & Engineering, 7, (3), 3127-3137, (2019)
   

artemisinin

Bilici M, Synthesis of a Novel Molecularly Imprinted Polymer for the Sensitive and Selective Determination of Artemisinin in Urine Samples Based on Solid-Phase Extraction (SPE) and Determination with High-Performance Liquid Chromatography (HPLC).
Analytical Letters, 54, (7), 1145-1161, (2021)
   

artesunate

Huang HL et al., Multifunctional Magnetic Cellulose Surface-Imprinted Microspheres for Highly Selective Adsorption of Artesunate.
ACS Sustainable Chemistry & Engineering, 4, (6), 3334-3343, (2016)
   

ar-turmerone

Hardoyono F et al., Identification and detection of bioactive compounds in turmeric (Curcuma longa L.) using a gas sensor array based on molecularly imprinted polymer quartz crystal microbalance.
New Journal of Chemistry, 45, (38), 17930-17940, (2021)
   

arylsulfonates

Székely G et al., Removal of potentially genotoxic acetamide and arylsulfonate impurities from crude drugs by molecular imprinting.
Journal of Chromatography A, 1240, (1), 52-58, (2012)
   

As

Yoshikawa M et al., Evaluation of the Recognition Ability of Molecularly Imprinted Proteins by Surface Plasmon Resonance (SPR) Spectroscopy.
Membrane, 32, (1), 40-44, (2007)
   

AS

Byun HS et al., Selective separation of aspirin using molecularly imprinted polymers.
Separation and Purification Technology, 74, (1), 144-153, (2010)
   

AS

Yoon SD et al., Molecularly imprinted polymers for selective separation of acetaminophen and aspirin by using supercritical fluid technology.
Chemical Engineering Journal, 226, 171-180, (2013)
   

As

Mafu LD et al., Synthesis and characterization of ion imprinted polymeric adsorbents for the selective recognition and removal of arsenic and selenium in wastewater samples.
Journal of Saudi Chemical Society, 20, (5), 594-605, (2016)
   

5-ASA

Ulubayram K et al., Molecularly imprinted acrylic-based microspheres for colonic delivery of 5-aminosalicylic acid.
Journal of Optoelectronics and Advanced Materials, 9, (11), 3479-3483, (2007)
   

5-ASA

Ulubayram K et al., Molecularly imprinted acrylic-based microspheres for colonic delivery of 5-aminosalicylic acid.
Optoelectronics And Advanced Materials-Rapid Communications, 1, (6), 312-316, (2007)
   

ASA

Proceeding, Ameli A et al, Nanosructured conducting molecularly imprinted polymer for selective extraction of salicylate from urine and serum samples by electrochemically controlled solid-phase micro-extraction, 
(2011)
   

ASA

Wang ZH et al., Acetylsalicylic acid electrochemical sensor based on PATP-AuNPs modified molecularly imprinted polymer film.
Talanta, 85, (3), 1672-1679, (2011)
   

ASA

Kim S et al., Electrochemical determination of mesalazine by using graphene oxide coated with a molecularly imprinted sol-gel.
Analytical Methods, 8, (43), 7780-7788, (2016)
   

ASA

Meischl F et al., Synthesis and evaluation of a novel molecularly imprinted polymer for the selective isolation of acetylsalicylic acid from aqueous solutions.
Journal of Environmental Chemical Engineering, 4, (Part A), 4083-4090, (2016)
   

ASA

Deiminiat B et al., A novel electrochemical imprinted sensor for acetylsalicylic acid based on polypyrrole, sol-gel and SiO2@Au core-shell nanoparticles.
Sensors and Actuators B: Chemical, 244, 785-795, (2017)
   

AsCl3

Proceeding, Jahantigh N, Molecular Imprinted Polymer (MIP) for arsenic extraction from environmental water and biological samples, 
Collery P, Maynard I, Theophanides T, Khassanova L, Collery T (Eds.), 247-251, (2008)
   

ascorbic acid

Ling TR et al., Size-selective recognition of catecholamines by molecular imprinting on silica-alumina gel.
Biosensors and Bioelectronics, 21, (6), 901-907, (2005)
   

ascorbic acid

Özcan L et al., Electrochemical preparation of a molecularly imprinted polypyrrole-modified pencil graphite electrode for determination of ascorbic acid.
Sensors, 8, (9), 5792-5805, (2008)
   

ascorbic acid

Prasad BB et al., Molecularly imprinted polymer-based solid-phase microextraction fiber coupled with molecularly imprinted polymer-based sensor for ultratrace analysis of ascorbic acid.
Journal of Chromatography A, 1198-1199, (1-2), 59-66, (2008)
   

ascorbic acid

Prasad BB et al., Ascorbic acid sensor based on molecularly imprinted polymer-modified hanging mercury drop electrode.
Materials Science and Engineering: C, 29, (4), 1082-1087, (2009)
   

ascorbic acid

Prasad BB et al., Ascorbic acid imprinted polymer-modified graphite electrode: A diagnostic sensor for hypovitaminosis C at ultra trace ascorbic acid level.
Sensors and Actuators B: Chemical, 160, (1), 418-427, (2011)
   

ascorbic acid

Roy AK et al., Molecularly imprinted polyaniline film for ascorbic acid detection.
Journal of Molecular Recognition, 24, (4), 700-706, (2011)
   

ascorbic acid

Tiwari MP et al., Double imprinting in a single molecularly imprinted polymer format for the determination of ascorbic acid and dopamine.
Advanced Materials Letters, 2, (4), 276-280, (2011)
   

ascorbic acid

Proceeding, Najafi M et al, Surface Imprinted Polyurethane Film Contaning Nano-Pore for Detection of Ascorbic Acid, 
956-958, (2012)
   

ascorbic acid

Mahmoud WE et al., Synthesis and characterization of electropolymerized molecularly imprinted microporous polyaniline films for solar cell applications.
Polymer Composites, 34, (2), 299-304, (2013)
   

ascorbic acid

Mehdinia A et al., Design and synthesis of molecularly imprinted polypyrrole based on nanoreactor SBA-15 for recognition of ascorbic acid.
Biosensors and Bioelectronics, 39, (1), 88-93, (2013)
   

ascorbic acid

Prasad BB et al., A dual-template imprinted polymer-modified carbon ceramic electrode for ultra trace simultaneous analysis of ascorbic acid and dopamine.
Biosensors and Bioelectronics, 50, 19-27, (2013)
   

ascorbic acid

Zhang W et al., Development and Application of Ascorbic Acid Molecularly Imprinted Electrochemical Sensors.
Journal of Instrumental Analysis, 32, (12), 1338-1342, (2013)
   

ascorbic acid

Kong Y et al., A novel voltammetric sensor for ascorbic acid based on molecularly imprinted poly(o-phenylenediamine-co-o-aminophenol).
Analytica Chimica Acta, 809, 54-60, (2014)
   

ascorbic acid

Ma F et al., A molecularly imprinted electrochemical sensor for simultaneous detection of dopamine and ascorbic acid.
Chinese Journal of Analysis Laboratory, 33, (11), 1255-1259, (2014)
   

ascorbic acid

Zhao XJ et al., Disposable Electrochemical Ascorbic Acid Sensor Based on Molecularly Imprinted Poly(o-phenylenediamine)-Modified Dual Channel Screen-Printed Electrode for Orange Juice Analysis.
Food Analytical Methods, 7, (7), 1557-1563, (2014)
   

ascorbic acid

Pandey I et al., Molecularly imprinted polyaniline-ferrocene-sulfonic acid-Carbon dots modified pencil graphite electrodes for chiral selective sensing of D-Ascorbic acid and L-Ascorbic acid: A clinical biomarker for preeclampsia.
Electrochimica Acta, 182, 917-928, (2015)
   

ascorbic acid

Shrivastav A et al., Surface Plasmon Resonance-Based Fiber Optic Sensor for the Detection of Ascorbic Acid Utilizing Molecularly Imprinted Polyaniline Film.
Plasmonics, 10, (6), 1853-1861, (2015)
   

ascorbic acid

Zhai YY et al., Electrochemical Molecular Imprinted Sensors Based on Electrospun Nanofiber and Determination of Ascorbic Acid.
Analytical Sciences, 31, (8), 793-798, (2015)
   

ascorbic acid

Shrivastav AM et al., A localized and propagating SPR, and molecular imprinting based fiber-optic ascorbic acid sensor using an in situ polymerized polyaniline-Ag nanocomposite.
Nanotechnology, 27, (34), ArticleNo345501-(2016)
   

ascorbic acid

Yan CL et al., A selective strategy for determination of ascorbic acid based on molecular imprinted copolymer of o-phenylenediamine and pyrrole.
Journal of Electroanalytical Chemistry, 780, 276-281, (2016)
   

ascorbic acid

Fernandes RS et al., Synthesis and characterization of porous surface molecularly imprinted silica microsphere for selective extraction of ascorbic acid.
Microporous And Mesoporous Materials, 264, 28-34, (2018)
   

ascorbic acid

Monier M et al., Surface molecularly imprinted amino-functionalized alginate microspheres for enantio-selective extraction of l-ascorbic acid.
Carbohydrate Polymers, 195, 652-661, (2018)
   

ascorbic acid

Zhang LJ et al., Highly selective and sensitive sensor based on an organic electrochemical transistor for the detection of ascorbic acid.
Biosensors and Bioelectronics, 100, 235-241, (2018)
   

ascorbic acid

Zhang ZX et al., Electropolymerized molecularly imprinted polypyrrole decorated with black phosphorene quantum dots onto poly(3,4-ethylenedioxythiophene) nanorods and its voltammetric sensing of vitamin C.
Journal of Electroanalytical Chemistry, 814, 153-160, (2018)
   

ascorbic acid

Rapini R et al., NanoMIP-based approach for the suppression of interference signals in electrochemical sensors.
Analyst, 144, (24), 7290-7295, (2019)
   

ascorbic acid

Hu Y et al., A ratiometric electrochemiluminescence sensing platform for robust ascorbic acid analysis based on a molecularly imprinted polymer modified bipolar electrode.
Biosensors and Bioelectronics, 167, Article112490-(2020)
   

ASD

Zeng SM et al., Molecularly imprinted polymer for selective extraction and simultaneous determination of four tropane alkaloids from Przewalskia tangutica Maxim. fruit extracts using LC-MS/MS.
RSC Advances, 5, (115), 94997-95006, (2015)
   

ASD

Zeng SM et al., Analysis of Four Tropane Alkaloids in Przewalskia Tangutica Maxim.by Analogous-specific Molecularly Imprinted Solid-phase Extraction Combined with High Performance Liquid Chromatography.
Journal of Instrumental Analysis, 35, (4), 373-379, (2016)
   

asenate

Manna J et al., Oxyanion-Binding in a Bioinspired Nanoparticle-Assembled Hybrid Microsphere Structure: Effective Removal of Arsenate/Chromate From Water.
ACS Applied Nano Materials, 2, (3), 1525-1532, (2019)
   

asiatic acid

Basnig DA et al., Synthesis, Optimization, and Characterization of Molecularly Imprinted Microgels for the Specific Recognition of Corosolic Acid.
International Journal of Chemical and Environmental Engineering, 4, (3), 177-183, (2013)
   

As(III)

Proceeding, Kalita H et al, Novel Arsenic Ion-Imprinted Polymer: Simultaneous Removal As(III) and As(V) from Water, 
Beighley REII, Kilgore MW (Eds.), 356, (2011)
   

As(III)

Liu BJ et al., Removal of arsenic from Laminaria japonica Aresch juice using As(III)-imprinted chitosan resin.
European Food Research and Technology, 232, (5), 911-917, (2011)
   

As(III)

Liu BJ et al., As(III) removal from aqueous solution using α-Fe2O3 impregnated chitosan beads with As(III) as imprinted ions.
Desalination, 272, (1-3), 286-292, (2011)
   

As(III)

Liu BJ et al., Adsorption behavior of As(III) onto chitosan resin with As(III) as template ions.
Journal of Applied Polymer Science, 125, (1), 246-253, (2012)
   

As(III)

Alizadeh T et al., Synthesis of nano-sized arsenic-imprinted polymer and its use as As3+ selective ionophore in a potentiometric membrane electrode: Part 1.
Analytica Chimica Acta, 843, 7-17, (2014)
   

As(III)

Alizadeh T et al., Improvement of durability and analytical characteristics of arsenic-imprinted polymer-based PVC membrane electrode via surface modification of nano-sized imprinted polymer particles: part 2.
Electrochimica Acta, 178, 877-885, (2015)
   

As(III)

Roy E et al., A single solution for arsenite and arsenate removal from drinking water using cysteine@ZnS:TiO2 nanoparticle modified molecularly imprinted biofouling-resistant filtration membrane.
Chemical Engineering Journal, 304, 259-270, (2016)
   

As(III)

Song XL et al., Effective and selective adsorption of As(III) via imprinted magnetic Fe3O4/HTCC composite nanoparticles.
Journal of Environmental Chemical Engineering, 5, (1), 16-25, (2017)
   

As(III)

Fang LL et al., Development of an anion imprinted polymer for high and selective removal of arsenite from wastewater.
Science of The Total Environment, 639, 110-117, (2018)
   

AS(III)

Mustafai FA et al., Microwave-assisted synthesis of imprinted polymer for selective removal of arsenic from drinking water by applying Taguchi statistical method.
European Polymer Journal, 109, 133-142, (2018)
   

As(III)

Jinadasa KK et al., Ionic imprinted polymer - Vortex-assisted dispersive micro-solid phase extraction for inorganic arsenic speciation in rice by HPLC-ICP-MS.
Talanta, 220, Article121418-(2020)
   

As(III)

Jinadasa KK et al., Synthesis and application of a surface ionic imprinting polymer on silica-coated Mn-doped ZnS quantum dots as a chemosensor for the selective quantification of inorganic arsenic in fish.
Analytical and Bioanalytical Chemistry, 412, (7), 1663-1673, (2020)
   

As(III)

Jinadasa KK et al., Ionic imprinted polymer solid-phase extraction for inorganic arsenic selective pre-concentration in fishery products before high-performance liquid chromatography - inductively coupled plasma-mass spectrometry speciation.
Journal of Chromatography A, 1619, Article460973-(2020)
   

As(III)

Ma WW et al., Novel electrochemical sensing platform based on ion imprinted polymer with nanoporous gold for ultrasensitive and selective determination of As3+.
Microchimica Acta, 187, (10), Article571-(2020)
   

As(III)

Chi ZF et al., Selective removal of As(III) using magnetic graphene oxide ion-imprinted polymer in porous media: Potential effect of external magnetic field.
Journal of Environmental Chemical Engineering, 9, (4), Article105671-(2021)
   

ASL

Roushani M et al., Selective detection of Asulam with in-situ dopamine electropolymerization based electrochemical MIP sensor.
Reactive and Functional Polymers, 169, Article105069-(2021)
   

Asp

Liu YM et al., Synthesis and Evaluation of Molecularly Imprinted Polymers Using Acetylsalicylic Acid as Template.
Journal of Instrumental Analysis, 26, (2), 165-169, (2007)
   

ASP

Kan XW et al., Magnetic molecularly imprinted polymer for aspirin recognition and controlled release.
Nanotechnology, 20, (16), Article No. 165601-(2009)
   

Asp

Chen YX et al., Constituting Chiral Caves by Using Novel Surface-Molecular Imprinting Technique and Realizating Chiral Separation of Enantiomers of Amino Acid.
Acta Chimica Sinica, 69, (14), 1705-1714, (2011)
   

ASPA

Wagdy HA et al., Synthesis of surface imprinted core-shell nanospheres for the selective determination of asparaginase.
Analytical Methods, 11, (31), 4034-4043, (2019)
   

asparaginase

Wagdy HA et al., Synthesis of surface imprinted core-shell nanospheres for the selective determination of asparaginase.
Analytical Methods, 11, (31), 4034-4043, (2019)
   

Asp-Arg-Val-Typ-Ile-His-Pro-Phe

Song SH et al., Recognition of Solution Structures of Peptides by Molecularly Imprinted Cyclodextrin Polymers.
Macromolecules, 40, (10), 3530-3532, (2007)
   

Asp-Arg-Val-Typ-Ile-His-Pro-Phe-His-Leu

Song SH et al., Recognition of Solution Structures of Peptides by Molecularly Imprinted Cyclodextrin Polymers.
Macromolecules, 40, (10), 3530-3532, (2007)
   

Asp-Arg-Val-Tyr-Val-His-Pro-Phe

Song SH et al., Recognition of Solution Structures of Peptides by Molecularly Imprinted Cyclodextrin Polymers.
Macromolecules, 40, (10), 3530-3532, (2007)
   

Asp-Arg-Val-Tyr-Val-His-Pro-Phe-His-Leu

Song SH et al., Recognition of Solution Structures of Peptides by Molecularly Imprinted Cyclodextrin Polymers.
Macromolecules, 40, (10), 3530-3532, (2007)
   

aspartame

Singh M et al., Water-compatible ’aspartame’-imprinted polymer grafted on silica surface for selective recognition in aqueous solution.
Analytical and Bioanalytical Chemistry, 405, (12), 4245-4252, (2013)
   

aspartame

Tiu BDB et al., Detection of aspartame via microsphere-patterned and molecularly imprinted polymer arrays.
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 495, 149-158, (2016)
   

aspartame

Yang JC et al., Surface imprinted conducting polymer patterns electrochemically grown from gold pinhole arrays on 2D inverse silica opals and their effective use in aspartame detection.
Sensors and Actuators B: Chemical, 255, (Part 1), 463-470, (2018)
   

aspartame

Srivastava J et al., Highly sensitive and selective estimation of aspartame by chitosan nanoparticles - graphene nanocomposite tailored EQCM-MIP sensor.
Polymer Bulletin, 76, (9), 4431-4449, (2019)
   

aspartame

Tan L et al., Specific adsorption and determination of aspartame in soft drinks with a zein magnetic molecularly imprinted modified MGCE sensor.
RSC Advances, 11, (22), 13486-13496, (2021)
   

aspartic acid

Monier M et al., Preparation of cross-linked chitosan/glyoxal molecularly imprinted resin for efficient chiral resolution of aspartic acid isomers.
Biochemical Engineering Journal, 51, (3), 140-146, (2010)
   

aspartic acid

Chen YX et al., Constituting Chiral Caves by Using Novel Surface-Molecular Imprinting Technique and Realizating Chiral Separation of Enantiomers of Amino Acid.
Acta Chimica Sinica, 69, (14), 1705-1714, (2011)
   

aspartic acid

Prasad BB et al., Electrochemically imprinted molecular recognition sites on multiwalled carbon-nanotubes/pencil graphite electrode surface for enantioselective detection of d- and l-aspartic acid.
Electrochimica Acta, 88, 24-34, (2013)
   

aspartic acid

Prasad BB et al., Highly sensitive and selective hyphenated technique (molecularly imprinted polymer solid-phase microextraction-molecularly imprinted polymer sensor) for ultra trace analysis of aspartic acid enantiomers.
Journal of Chromatography A, 1283, 9-19, (2013)
   

aspartic acid

Prasad BB et al., Molecularly imprinted polymer-matrix nanocomposite for enantioselective electrochemical sensing of d- and l-aspartic acid.
Materials Science and Engineering: C, 33, (7), 4071-4080, (2013)
   

aspartic acid

Prasad BB et al., Ultra-trace analysis of d-and l-aspartic acid applying one-by-one approach on a dual imprinted electrochemical sensor.
Sensors and Actuators B: Chemical, 240, 631-639, (2017)
   

aspartic acid

Chen XH et al., Derivative chiral copper(II) complexes as template of an electrochemical molecular imprinting sol-gel sensor for enantiorecognition of aspartic acid.
Analytica Chimica Acta, 1072, 54-60, (2019)
   

aspartic acid

Zhu YY et al., Fluorescence detection of d-aspartic acid based on thiol-ene cross-linked molecularly imprinted optical fiber probe.
Sensors and Actuators B: Chemical, 305, Article127323-(2020)
   

aspirin

Hu XG et al., Synthesis and Research of Molecule Recognition Capability of Aspirin Molecularly Imprinted Polymer.
Fine Chemicals, 22, (1), 1-4, (2005)
   

aspirin

Duarte ARC et al., Supercritical fluid polymerisation and impregnation of molecularly imprinted polymers for drug delivery.
Journal of Supercritical Fluids, 39, (1), 102-106, (2006)
   

aspirin

Hu XG et al., The quantitative analysis of aspirin by molecularly imprinted solid-phase extraction technique.
Journal of South China Normal University (Natural Science Edition), (4), 88-92, (2006)
   

aspirin

Liu YM et al., Synthesis and Evaluation of Molecularly Imprinted Polymers Using Acetylsalicylic Acid as Template.
Journal of Instrumental Analysis, 26, (2), 165-169, (2007)
   

aspirin

Liu XH et al., Study on aspirin-MAA hydrogel MIP system.
Chinese Journal of Reactive Polymers, 17, (2), 109-112, (2008)
   

aspirin

Kan XW et al., Magnetic molecularly imprinted polymer for aspirin recognition and controlled release.
Nanotechnology, 20, (16), Article No. 165601-(2009)
   

aspirin

Byun HS et al., Selective separation of aspirin using molecularly imprinted polymers.
Separation and Purification Technology, 74, (1), 144-153, (2010)
   

aspirin

Proceeding, Ameli A et al, Nanosructured conducting molecularly imprinted polymer for selective extraction of salicylate from urine and serum samples by electrochemically controlled solid-phase micro-extraction, 
(2011)
   

aspirin

Proceeding, Chu HJ et al, Synthesis and Performance of Molecular Imprinted Polymers as Drug Release Controller, 
In: Applied Mechanics and Materials, Zhao H (Ed.), 446-449, (2011)
   

aspirin

Wang ZH et al., Acetylsalicylic acid electrochemical sensor based on PATP-AuNPs modified molecularly imprinted polymer film.
Talanta, 85, (3), 1672-1679, (2011)
   

aspirin

Yoon SD et al., Molecularly imprinted polymers for selective separation of acetaminophen and aspirin by using supercritical fluid technology.
Chemical Engineering Journal, 226, 171-180, (2013)
   

aspirin

Sooraj MP et al., Artificial Recognition Sorbents on Multiwalled Carbon Nanotubes for the Separation of Aspirin from its Structural Analogues.
International Journal of Scientific & Engineering Research, 6, (9), 723-733, (2015)
   

aspirin

Su LQ et al., Controlled Preparation and Characterization of Aspirin Surface Molecularly Imprinted Separating Medium Based on Halloysite Nanotubes.
Chinese Journal of Analytical Chemistry, 43, (11), 1772-1776, (2015)
   

aspirin

Wei X et al., Specific recognition and fluorescent determination of aspirin by using core-shell CdTe quantum dot-imprinted polymers.
Microchimica Acta, 182, (7-8), 1527-1534, (2015)
   

aspirin

Bhatia T et al., Sol-gel approach for extracting highly versatile aspirin and its metabolites using MISPE followed by GC-MS/MS analysis.
Bioanalysis, 8, (8), 795-805, (2016)
   

aspirin

Zheng XF et al., Preparation and characterization of temperature-memory nanoparticles of MIP-CS-g-PMMA.
RSC Advances, 6, (112), 110722-110732, (2016)
   

aspirin

Deiminiat B et al., A novel electrochemical imprinted sensor for acetylsalicylic acid based on polypyrrole, sol-gel and SiO2@Au core-shell nanoparticles.
Sensors and Actuators B: Chemical, 244, 785-795, (2017)
   

aspirin

Pawley JC et al., Studying the Drug Delivery Kinetics of a Nanoporous Matrix Using a MIP-Based Thermal Sensing Platform.
Polymers, 9, (11), ArticleNo560-(2017)
   

aspirin

Su LQ et al., Reversible addition fragmentation chain transfer preparation and performance evaluation of aspirin imprinted material.
Chinese Journal of Analysis Laboratory, 36, (2), 168-172, (2017)
   

aspirin

Suriyanarayanan S et al., Electrochemically synthesized molecularly imprinted polythiophene nanostructures as recognition elements for an aspirin-chemosensor.
Sensors and Actuators B: Chemical, 253, 428-436, (2017)
   

aspirin

Xi WJ et al., Vibrational Frequency Shifts for Monitoring Noncovalent Interactions between Molecular Imprinted Polymers and Analgesics.
The Journal of Physical Chemistry C, 122, (40), 23068-23077, (2018)
   

ASPV

Bai W et al., A Double-Imprinted Diffraction-Grating Sensor Based on a Virus-Responsive Super-Aptamer Hydrogel Derived from an Impure Extract.
Angewandte Chemie International Edition, 53, (8), 2095-2098, (2014)
   

astaxanthin

Bi W et al., Task-specific ionic liquid-assisted extraction and separation of astaxanthin from shrimp waste.
Journal of Chromatography B, 878, (24), 2243-2248, (2010)
   

astaxanthin

Zhu T et al., Optimization and application of liquid chromatography determination of dispersive liquid-liquid microextraction purified astaxanthin in shrimp waste.
Chemical Research in Chinese Universities, 29, (3), 429-433, (2013)
   

astragalin

Li XJ et al., Green synthesis and evaluation of isoquercitrin imprinted polymers for class-selective separation and purification of flavonol glycosides.
Analytical Methods, 7, (11), 4717-4724, (2015)
   

asulam

Roushani M et al., Selective detection of Asulam with in-situ dopamine electropolymerization based electrochemical MIP sensor.
Reactive and Functional Polymers, 169, Article105069-(2021)
   

AS(V)

Proceeding, Kalita H et al, Novel Arsenic Ion-Imprinted Polymer: Simultaneous Removal As(III) and As(V) from Water, 
Beighley REII, Kilgore MW (Eds.), 356, (2011)
   

As(V)

Fan HT et al., Selective Removal of Arsenic(V) from Aqueous Solution Using A Surface-Ion-Imprinted Amine-Functionalized Silica Gel Sorbent.
Industrial & Engineering Chemistry Research, 51, (14), 5216-5223, (2012)
   

As(V)

Önnby L et al., Polymer composite adsorbents using particles of molecularly imprinted polymers or aluminium oxide nanoparticles for treatment of arsenic contaminated waters.
Water Research, 46, (13), 4111-4120, (2012)
   

As(V)

Proceeding, Pan MH et al, Selective Removal of As(V) from Aqueous Solutions Using Magnetic As(V)-Imprinted Polymers with Combination of Two Functional Monomers, 
In: Applied Mechanics and Materials, Hegde G (Ed.), 495-498, (2014)
   

As(V)

Pan MH et al., Synthesis of Magnetic As(V)-Imprinted Polymers and Their Adsorption Performances for Arsenate in Water Solutions.
Fresenius Environmental Bulletin, 23, (1), 122-129, (2014)
   

As(V)

Zhu LY et al., Synthesis of As(V)-Cr(III) Co-Imprinted Polymer and Its Adsorption Performance for Arsenate Species.
Separation Science and Technology, 49, (10), 1584-1591, (2014)
   

As(V)

Roy E et al., A single solution for arsenite and arsenate removal from drinking water using cysteine@ZnS:TiO2 nanoparticle modified molecularly imprinted biofouling-resistant filtration membrane.
Chemical Engineering Journal, 304, 259-270, (2016)
   

As(V)

Jinadasa KK et al., Ionic imprinted polymer - Vortex-assisted dispersive micro-solid phase extraction for inorganic arsenic speciation in rice by HPLC-ICP-MS.
Talanta, 220, Article121418-(2020)
   

As(V)

Jinadasa KK et al., Synthesis and application of a surface ionic imprinting polymer on silica-coated Mn-doped ZnS quantum dots as a chemosensor for the selective quantification of inorganic arsenic in fish.
Analytical and Bioanalytical Chemistry, 412, (7), 1663-1673, (2020)
   

As(V)

Jinadasa KK et al., Ionic imprinted polymer solid-phase extraction for inorganic arsenic selective pre-concentration in fishery products before high-performance liquid chromatography - inductively coupled plasma-mass spectrometry speciation.
Journal of Chromatography A, 1619, Article460973-(2020)
   

As(V)

Kisomi AS et al., Application of [mu]-TLC for speciation of inorganic arsenic by laser ablation inductively coupled plasma mass spectrometry.
Microchemical Journal, 159, Article105443-(2020)
   

asymmetric dimethylarginine

Malyshev V et al., Determination of Asymmetric Dimethylarginine by Using Organic Semiconductor-Based Molecularly Imprinted Polymer Film.
ECS Journal of Solid State Science and Technology, 7, (7), Q3189-Q3195, (2018)
   

AT(3)

Guo YS et al., Study on specific solid phase extraction of anticholinergic drugs by molecularly imprinted polymers with structural analogues as templates.
Chinese Journal of Analytical Chemistry, 34, (3), 347-350, (2006)
   

AT

Khanahmadzadeh S et al., Nano-sized Amitriptyline (AT) imprinted polymer particles: Synthesis and characterization in Silicon oil.
International Journal of Nano Dimension, 8, (2), 182-186, (2017)
   

ATAB

Chen H et al., To Construct "Ion Traps" for Enhancing the Permselectivity and Permeability of Polyelectrolyte Multilayer Films.
Macromolecules, 40, (3), 653-660, (2007)
   

ATC

Mojica ER et al., Tetracycline speciation during molecular imprinting in xerogels results in class-selective binding.
Analyst, 136, (4), 749-755, (2011)
   

ATCA

Jackson R et al., Molecularly imprinted polymer stir bar sorption extraction and electrospray ionization tandem mass spectrometry for determination of 2-aminothiazoline-4-carboxylic acid as a marker for cyanide exposure in forensic urine analysis.
Analytical Methods, 2, (5), 552-557, (2010)
   

ATCA

Petrikovics I et al., Determining the biomarker cyanide metabolite 2-aminothiazoline-4-carboxylic acid in mice liver after cyanide exposure.
Toxicology Letters, 196, (Supplement 1), S295-S296, (2010)
   

ATCA

Petrikovics I et al., Plasma persistence of 2-aminothiazoline-4-carboxylic acid in rat system determined by liquid chromatography tandem mass spectrometry.
Journal of Chromatography B, 891-892, (1), 81-84, (2012)
   

ATCA

Lulinski P et al., A highly selective molecularly imprinted sorbent for extraction of 2-aminothiazoline-4-carboxylic acid - Synthesis, characterization and application in post-mortem whole blood analysis.
Journal of Chromatography A, 1420, 16-25, (2015)
   

ATD

Chen FF et al., Magnetic molecularly imprinted polymer for the selective extraction of sildenafil, vardenafil and their analogs from herbal medicines.
Talanta, 115, 482-489, (2013)
   

atenolol

He JF et al., Synthesis of receptor mimicking polymers and their adsorption behavior.
Journal of Instrumental Analysis, 24, (3), 6-9, (2005)
   

atenolol

Xu L et al., Preparation and Absorption Property of Molecularly Imprinted Polymer for Metoprolol.
Journal of Instrumental Analysis, 25, (4), 45-47,51, (2006)
   

atenolol

Andreetta HA et al., Fluorescence Detection of Atenolol Using a Molecular Imprinted Polymer.
Analytical Letters, 41, (1), 36-45, (2008)
   

atenolol

Bompart M et al., Direct detection of analyte binding to single molecularly imprinted polymer particles by confocal Raman spectroscopy.
Biosensors and Bioelectronics, 25, (3), 568-571, (2009)
   

atenolol

Hu XG et al., Preparation and evaluation of propranolol molecularly imprinted solid-phase microextraction fiber for trace analysis of β-blockers in urine and plasma samples.
Journal of Chromatography A, 1216, (2), 190-197, (2009)
   

atenolol

Proceeding, Yu JY et al, Molecularly imprinted polymer microspheres prepared by precipitation polymerization for atenolol recognition, 
Liu XH, Jiang ZY, Han JT (Eds.), 1192-1198, (2010)
   

atenolol

Zaidi SA et al., Open tubular capillary columns with basic templates made by the generalized preparation protocol in capillary electrochromatography chiral separation and template structural effects on chiral separation capability.
Journal of Chromatography A, 1218, (9), 1291-1299, (2011)
   

atenolol

Alizadeh T et al., Evaluation of the facilitated transport capabilities of nano- and micro-sized molecularly imprinted polymers (MIPs) in a bulk liquid membrane system.
Separation and Purification Technology, 90, (1), 83-91, (2012)
   

atenolol

Morante-Zarcero S et al., Simultaneous Enantiomeric Determination of Propranolol, Metoprolol, Pindolol, and Atenolol in Natural Waters by HPLC on New Polysaccharide-Based Stationary Phase using a Highly Selective Molecularly Imprinted Polymer Extraction.
Chirality, 24, (10), 860-866, (2012)
   

atenolol

Alizadeh T, Synthesis of a nano-sized chiral imprinted polymer and its use as an (S)-atenolol carrier in the bulk liquid membrane.
Journal of Separation Science, 37, (14), 1887-1895, (2014)
   

atenolol

Boonjob W et al., Retention and selectivity of basic drugs on solid-phase extraction sorbents: Application to direct determination of β-blockers in urine.
Analytical and Bioanalytical Chemistry, 406, (17), 4207-4215, (2014)
   

atenolol

Iacob BC et al., Simultaneous Enantiospecific Recognition of Several β-Blocker Enantiomers Using Molecularly Imprinted Polymer-Based Electrochemical Sensor.
Analytical Chemistry, 87, (5), 2755-2763, (2015)
   

atenolol

Panahi HA et al., Selective Sorption and Determination of Atenolol in Pharmaceutical and Biological Samples by Molecular Imprinting Using New Copolymer Beads as a Functional Matrix.
Journal of Liquid Chromatography & Related Technologies, 38, (2), 222-228, (2015)
   

atenolol

Santos MG et al., Direct doping analysis of beta-blocker drugs from urinary samples by on-line molecularly imprinted solid-phase extraction coupled to liquid chromatography/mass spectrometry.
Analyst, 140, (8), 2696-2703, (2015)
   

atenolol

Iacob BC et al., Study of the Molecular Recognition Mechanism of an Ultrathin MIP Film-Based Chiral Electrochemical Sensor.
Electrochimica Acta, 217, 195-202, (2016)
   

atenolol

Gorbani Y et al., Spectrofluorimetric determination of atenolol from human urine using high-affinity molecularly imprinted solid-phase extraction sorbent.
Luminescence, 32, (8), 1391-1397, (2017)
   

atenolol

Bodoki AE et al., Improved Enantioselectivity for Atenolol Employing Pivot Based Molecular Imprinting.
Molecules, 23, (8), ArticleNo1875-(2018)
   

atenolol

Hasanah AN et al., Synthesis of Atenolol-Imprinted Polymers with Methyl Methacrylate as Functional Monomer in Propanol Using Bulk and Precipitation Polymerization Method.
Journal of Analytical Methods in Chemistry, 2019, Article9853620-(2019)
   

atenolol

Pratiwi R et al., Comparison of Bulk and Precipitation Polymerization Method of Synthesis Molecular Imprinted Solid Phase Extraction for Atenolol using Methacrylic Acid.
Journal of Young Pharmacists, 11, (1), 12-16, (2019)
   

atenolol

Suherman M et al., Performance Evaluation of Molecularly Imprinted Polymer using Propanol as Porogen for Atenolol Recognition in Human Serum.
Indonesian Journal of Pharmaceutical Science and Technology, 6, (1), 27-35, (2019)
   

Atmer 129

Cela-Pérez MC et al., A study of competitive molecular interaction effects on imprinting of molecularly imprinted polymers.
Vibrational Spectroscopy, 65, 74-83, (2013)
   

ATNL

Iacob BC et al., Simultaneous Enantiospecific Recognition of Several β-Blocker Enantiomers Using Molecularly Imprinted Polymer-Based Electrochemical Sensor.
Analytical Chemistry, 87, (5), 2755-2763, (2015)
   

Atorvastatin

de Escobar CC et al., Synthesis of molecularly imprinted photocatalysts containing low TiO2 loading: Evaluation for the degradation of pharmaceuticals.
Journal of Hazardous Materials, 306, 359-366, (2016)
   

atorvastatin

Abbasi S et al., Enrichment of cardiovascular drugs using rhamnolipid bioaggregates after dispersive solid phase extraction based water compatible magnetic molecularly imprinted biopolymers.
Microchemical Journal, 157, Article104874-(2020)
   

ATP

Mathew J et al., Molecular imprinting approach for the recognition of adenine in aqueous-medium and hydrolysis of adenosine 5’-triphosphate.
Bioconjugate Chemistry, 6, (5), 524-528, (1995)
   

ATP

Hong SJ et al., Preparation of molecular imprinted polypyrrole and poly(o-phenylenediamine) and their application as EQCM sensors for ATP detection.
Abstracts of Papers of the American Chemical Society, 223, (ANYL), 113-113, (2002)
   

ATP

Matsui J et al., Molecular Imprinting within a Single Peptide Molecule for Synthesizing a Water-Soluble ATP Receptor.
Pept. Sci., 396-397, (2006)
   

ATP

Matsui J et al., Development of a tailor-made functional peptide by template-directed intramolecular cross-linking.
Polymer Preprints, Japan, 55, (2), 5328-5329, (2006)
   

ATP

Sreenivasan K, Synthesis and evaluation of multiply templated molecularly imprinted polyaniline.
Journal of Materials Science, 42, (17), 7575-7578, (2007)
   

ATP

Matsui J et al., An approach to peptide-based ATP receptors by a combination of random selection, rational design, and molecular imprinting.
Biosensors and Bioelectronics, 25, (3), 563-567, (2009)
   

ATP

Plewa A et al., Molecularly Imprinted Hybrid Adsorbents for Adenine and Adenosine-5’-triphosphate.
Journal of Medicinal Chemistry, 55, (20), 8712-8720, (2012)
   

ATP

Huynh TP et al., Electrochemically synthesized molecularly imprinted polymer of thiophene derivatives for flow-injection analysis determination of adenosine-5’-triphosphate (ATP).
Biosensors and Bioelectronics, 41, 634-641, (2013)
   

ATP

Yang M et al., Determination of ATP using a double-receptor sandwich method based on molecularly imprinted membrane and fluorescence-labeled uranyl-salophen complex.
Analytical and Bioanalytical Chemistry, 405, (23), 7545-7551, (2013)
   

ATP

Sharma PS et al., Fullerene derived molecularly imprinted polymer for chemosensing of adenosine-5’-triphosphate (ATP).
Analytica Chimica Acta, 844, 61-69, (2014)
   

ATP

Cela-Pérez MC et al., Selective removal of ATP degradation products from food matrices II: Rapid screening of hypoxanthine and inosine by molecularly imprinted matrix solid-phase dispersion for evaluation of fish freshness.
Talanta, 135, 58-66, (2015)
   

ATP

Takata A et al., ATP-binding peptide-hydrogel composite synthesized by molecular imprinting on beads.
Molecular Imprinting, 3, (1), 65-70, (2015)
   

ATPprotein

Dmitrienko EV et al., A simple approach to prepare molecularly imprinted polymers from nylon-6.
Journal of Molecular Recognition, 26, (8), 368-375, (2013)
   

ATR

Turiel E et al., Molecularly Imprinted Polymeric Fibers for Solid-Phase Microextraction.
Analytical Chemistry, 79, (8), 3099-3104, (2007)
   

ATR

Chen J et al., Novel Liquid-Liquid-Solid Microextraction Using Molecularly Imprinted Polymer Monolithic Fibres and Its Application to the Extraction of s-Triazine Herbicides from Water Samples.
Adsorption Science & Technology, 32, (4), 331-342, (2014)
   

Atr

Geng HR et al., A newly developed molecularly imprinted polymer on the surface of TiO2 for selective extraction of triazine herbicides residues in maize, water, and soil.
Analytical and Bioanalytical Chemistry, 407, (29), 8803-8812, (2015)
   

ATR

Barahona F et al., Molecularly imprinted polymer-coated hollow fiber membrane for the microextraction of triazines directly from environmental waters.
Journal of Chromatography A, 1442, 12-18, (2016)
   

ATR

Díaz-Álvarez M et al., Molecularly imprinted polymer monolith containing magnetic nanoparticles for the stir-bar sorptive extraction of triazines from environmental soil samples.
Journal of Chromatography A, 1469, 1-7, (2016)
   

ATR

Yola ML et al., Electrochemical Detection of Atrazine by Platinum Nanoparticles/Carbon Nitride Nanotubes with Molecularly Imprinted Polymer.
Industrial & Engineering Chemistry Research, 56, (27), 7631-7639, (2017)
   

atractylenolide III

Jiang YF et al., Study on targeted separation of atractylenolide IQ from traditional Chinese herbs by molecularly imprinted solid phase extraction.
Chinese Pharmaceutical Journal, 47, (13), 1077-1080, (2012)
   

atractylenolide III

Yin XY et al., Correlation study between molecular structure of sesquiterpene lactones and the selective adsorption performance of molecularly imprinted polymers.
Journal of Chromatography A, 1354, 9-17, (2014)
   

atrazine

Matsui J et al., Atrazine-selective polymer prepared by molecular imprinting technique.
Chemistry Letters, 24, (6), 489-489, (1995)
   

atrazine

Dauwe C et al., Influence of template basicity and hydrophobicity on the molecular recognition properties of molecularly imprinted polymers.
Journal of Chromatography A, 753, (2), 191-200, (1996)
   

atrazine

Matsui J et al., Design and preparation of molecularly imprinted atrazine-receptor polymers: Investigation of functional monomers and solvents.
Analytical Sciences, 14, (4), 699-702, (1998)
   

atrazine

Sergeyeva TA et al., Conductimetric sensor for atrazine detection based on molecularly imprinted polymer membranes.
Analyst, 124, (3), 331-334, (1999)
   

atrazine

Sergeyeva TA et al., Selective recognition of atrazine by molecularly imprinted polymer membranes. Development of conductometric sensor for herbicides detection.
Analytica Chimica Acta, 392, (2-3), 105-111, (1999)
   

atrazine

Takeuchi T et al., Combinatorial molecular imprinting for formation of atrazine decomposing polymers.
Chemistry Letters, 30, (6), 530-531, (2001)
   

atrazine

Sergeyeva TA et al., Synthesis of matrix polymeric membranes for the solid-phase extraction of triazine herbicides from aqueous solutions and their study.
Reports of National Academy of Sciences of Ukraine, 6, 170-175, (2003)
   

atrazine

Shoji R et al., Atrazine sensor based on molecularly imprinted polymer-modified gold electrode.
Analytical Chemistry, 75, (18), 4882-4886, (2003)
   

atrazine

Shoji R et al., Atrazine sensor based on a nano chemical receptor modified electrode.
Bunseki Kagaku, 52, (12), 1141-1146, (2003)
   

atrazine

Schneider F et al., Comparison of thin-layer and bulk MlPs synthesized by photoinitiated in situ crosslinking polymerization from the same reaction mixtures.
Journal of Applied Polymer Science, 98, (1), 362-372, (2005)
   

atrazine

Svenson J et al., The role of functional monomer-template complexation on the performance of atrazine molecularly imprinted polymers.
Analytical Letters, 38, (1), 57-69, (2005)
   

atrazine

Breton F et al., Integration of photosynthetic biosensor with molecularly imprinted polymer-based solid phase extraction cartridge.
Analytica Chimica Acta, 569, (1-2), 50-57, (2006)
   

Atrazine

Carabias-Martínez R et al., Behaviour of triazine herbicides and their hydroxylated and dealkylated metabolites on a propazine-imprinted polymer: Comparative study in organic and aqueous media.
Analytica Chimica Acta, 559, (2), 186-194, (2006)
   

atrazine

D’Agostino G et al., Potentiometric sensor for atrazine based on a molecular imprinted membrane.
Biosensors and Bioelectronics, 22, (1), 145-152, (2006)
   

atrazine

Kubo A et al., Atrazine-imprinted microspheres prepared using a microfluidic device.
Chemistry Letters, 35, (6), 588-589, (2006)
   

atrazine

Lavignac N et al., Concentration dependent atrazine-atrazine complex formation promotes selectivity in atrazine imprinted polymers.
Biosensors and Bioelectronics, 22, (1), 138-144, (2006)
   

atrazine

Yane T et al., Artificial enzyme for atrazine decomposition prepared by molecular imprinting.
Polymer Preprints, Japan, 55, (2), 4806-(2006)
   

atrazine

Yane T et al., Atrazine transforming polymer prepared by molecular imprinting with post-imprinting process.
Organic & Biomolecular Chemistry, 4, (24), 4469-4473, (2006)
   

atrazine

Belmont AS et al., Molecularly imprinted polymer films for reflectometric interference spectroscopic sensors.
Biosensors and Bioelectronics, 22, (12), 3267-3272, (2007)
   

atrazine

Hu XG et al., Development of novel molecularly imprinted solid-phase microextraction fiber and its application for the determination of triazines in complicated samples coupled with high-performance liquid chromatography.
Journal of Chromatography A, 1147, (1), 1-9, (2007)
   

atrazine

Matsui J et al., Molecular Imprinting under Molecular Crowding Conditions: An Aid to the Synthesis of a High-Capacity Polymeric Sorbent for Triazine Herbicides.
Analytical Chemistry, 79, (4), 1749-1757, (2007)
   

atrazine

Prasad K et al., Molecularly imprinted polymer (biomimetic) based potentiometric sensor for atrazine.
Sensors and Actuators B: Chemical, 123, (1), 65-70, (2007)
   

atrazine

Sambe H et al., Molecularly imprinted polymers for triazine herbicides prepared by multi-step swelling and polymerization method: Their application to the determination of methylthiotriazine herbicides in river water.
Journal of Chromatography A, 1152, (1-2), 130-137, (2007)
   

atrazine

Sergeyeva TA et al., Porous molecularly imprinted polymer membranes and polymeric particles.
Analytica Chimica Acta, 582, (2), 311-319, (2007)
   

atrazine

Turiel E et al., Molecularly Imprinted Polymeric Fibers for Solid-Phase Microextraction.
Analytical Chemistry, 79, (8), 3099-3104, (2007)
   

atrazine

Amalric L et al., Molecularly imprinted polymer applied to the determination of the residual mass of atrazine and metabolites within an agricultural catchment (Brevilles, France).
Journal of Chromatography A, 1206, (2), 95-104, (2008)
   

atrazine

Djozan D et al., Preparation of new solid phase micro extraction fiber on the basis of atrazine-molecular imprinted polymer: Application for GC and GC/MS screening of triazine herbicides in water, rice and onion.
Analytica Chimica Acta, 616, (2), 152-159, (2008)
   

atrazine

Guzzella L et al., Synthesis and characterization of a propazine imprinted polymer for the extraction of triazines herbicides.
Water Science And Technology, 57, (1), 139-144, (2008)
   

atrazine

Koohpaei AR et al., Molecular Imprinted Solid Phase Extraction for Determination of Atrazine in Environmental Samples.
Iranian Journal of Environmental Health Science & Engineering, 5, (4), 283-296, (2008)
   

atrazine

Kubo I et al., Atrazine sensing chip based on molecularly imprinted polymer layer.
Electrochemistry, 76, (8), 541-544, (2008)
   

atrazine

Lara FJ et al., Evaluation of a molecularly imprinted polymer as in-line concentrator in capillary electrophoresis.
Electrophoresis, 29, (18), 3834-3841, (2008)
   

atrazine

Lieberzeit PA et al., Nanostructured Particles and Layers for Sensing Contaminants in Air and Water.
Nano, 3, (4), 205-208, (2008)
   

atrazine

Sergeyeva TA et al., Data on the structure and recognition properties of the template-selective binding sites in semi-IPN-based molecularly imprinted polymer membranes.
Materials Science and Engineering: C, 28, (8), 1472-1479, (2008)
   

atrazine

Wu Z et al., Label-Free Colorimetric Detection of Trace Atrazine in Aqueous Solution by Using Molecularly Imprinted Photonic Polymers.
Chemistry - A European Journal, 14, (36), 11358-11368, (2008)
   

atrazine

Djozan D et al., Preparation and binding study of solid-phase microextraction fiber on the basis of ametryn-imprinted polymer: Application to the selective extraction of persistent triazine herbicides in tap water, rice, maize and onion.
Journal of Chromatography A, 1216, (12), 2211-2219, (2009)
   

atrazine

Gao HY, HPLC Determination of Atrazine in Surface Water with SPE Packed with Molecularly Imprinted Polymer.
Physical Testing and Chemical Analysis Part B: Chemical Analysis, 45, (9), 827-829, (2009)
   

atrazine

Hu YL et al., Improvement of extraction capability of magnetic molecularly imprinted polymer beads in aqueous media via dual-phase solvent system.
Talanta, 79, (3), 576-582, (2009)
   

atrazine

Kueseng P et al., Molecularly imprinted polymer for analysis of trace atrazine herbicide in water.
Journal of Environmental Science and Health Part B-Pesticides Food Contaminants and Agricultural Wastes, 44, (8), 772-780, (2009)
   

atrazine

Le Noir M et al., Removal of endocrine-disrupting compounds from water using macroporous molecularly imprinted cryogels in a moving-bed reactor.
Journal of Separation Science, 32, (9), 1471-1479, (2009)
   

atrazine

Ma YF et al., Determination of atrazine in soil sample based on molecularly imprinted film electrochemical sensors.
Chemical Research and Application, 21, (5), 624-629, (2009)
   

Atrazine

Matsui J et al., Molecularly imprinted nanocomposites for highly sensitive SPR detection of a non-aqueous atrazine sample.
Analyst, 134, (1), 80-86, (2009)
   

atrazine

Mhaka B et al., Selective extraction of triazine herbicides from food samples based on a combination of a liquid membrane and molecularly imprinted polymers.
Journal of Chromatography A, 1216, (40), 6796-6801, (2009)
   

atrazine

Pardieu E et al., Molecularly imprinted conducting polymer based electrochemical sensor for detection of atrazine.
Analytica Chimica Acta, 649, (2), 236-245, (2009)
   

atrazine

Pesavento M et al., Molecularly Imprinted Polymer-Based Sensors for Amperometric Determination of Nonelectroactive Substances.
Electroanalysis, 21, (3-5), 604-611, (2009)
   

atrazine

Zhang Y et al., Microwave Heating in Preparation of Magnetic Molecularly Imprinted Polymer Beads for Trace Triazines Analysis in Complicated Samples.
Analytical Chemistry, 81, (3), 967-976, (2009)
   

atrazine

Boonjob W et al., Online Hyphenation of Multimodal Microsolid Phase Extraction Involving Renewable Molecularly Imprinted and Reversed-Phase Sorbents to Liquid Chromatography for Automatic Multiresidue Assays.
Analytical Chemistry, 82, (7), 3052-3060, (2010)
   

atrazine

Djozan D et al., Evaluation of a new method for chemical coating of aluminum wire with molecularly imprinted polymer layer. Application for the fabrication of triazines selective solid-phase microextraction fiber.
Analytica Chimica Acta, 674, (1), 40-48, (2010)
   

atrazine

Malitesta C et al., X-Ray Photoelectron Spectroscopy characterization of electrosynthesized poly(3-thiophene acetic acid) and its application in Molecularly Imprinted Polymers for atrazine.
Thin Solid Films, 518, (14), 3705-3709, (2010)
   

atrazine

See HH et al., Determination of triazine herbicides using membrane-protected carbon nanotubes solid phase membrane tip extraction prior to micro-liquid chromatography.
Journal of Chromatography A, 1217, (11), 1767-1772, (2010)
   

atrazine

Silva RGC et al., Molecularly imprinted silica as a selective SPE sorbent for triazine herbicides.
Journal of Separation Science, 33, (9), 1319-1324, (2010)
   

atrazine

Wang YH et al., Preparation and Application of Atrazine Molecularly Imprinted Solid Phase Extraction Pillar.
Chinese Journal of Analytical Chemistry, 38, (5), 678-682, (2010)
   

atrazine

Chimuka L et al., Selective extraction of triazine herbicides based on a combination of membrane assisted solvent extraction and molecularly imprinted solid phase extraction.
Journal of Chromatography A, 1218, (5), 647-653, (2011)
   

atrazine

Latif U et al., Dual and tetraelectrode QCMs using imprinted polymers as receptors for ions and neutral analytes.
Analytical and Bioanalytical Chemistry, 400, (8), 2507-2515, (2011)
   

atrazine

Lattach Y et al., Surface Acoustic Wave Sensor Combining Gravimetric and Electrochemical Transductions: Application for Atrazine Detection.
Sensor Letters, 9, (6), 2249-2252, (2011)
   

atrazine

Liu RY et al., Core-shell nanostructured molecular imprinting fluorescent chemosensor for selective detection of atrazine herbicide.
Analyst, 136, (1), 184-190, (2011)
   

atrazine

Peighambarzadeh SZ et al., Presence of atrazine in the biological samples of cattle and its consequence adversity in human health.
Iranian Journal of Public Health, 40, (4), 112-121, (2011)
   

atrazine

Schirhagl R et al., Atrazine detection based on antibody replicas.
Journal of Materials Chemistry, 21, (38), 14594-14598, (2011)
   

atrazine

Tan F et al., Evaluation of a novel microextraction technique for aqueous samples: Porous membrane envelope filled with multiwalled carbon nanotubes coated with molecularly imprinted polymer.
Journal of Separation Science, 34, (6), 707-715, (2011)
   

atrazine

Wang ZX et al., Preparation of Atrazine Molecularly Imprinted Polymers and Recognition Characteristics.
Acta Chimica Sinica, 69, (22), 2717-2722, (2011)
   

atrazine

Xu SF et al., Molecularly imprinted core-shell nanoparticles for determination of trace atrazine by reversible addition-fragmentation chain transfer surface imprinting.
Journal of Materials Chemistry, 21, (12), 4346-4351, (2011)
   

atrazine

Xu SF et al., Molecularly imprinted polymers by reversible addition-fragmentation chain transfer precipitation polymerization for preconcentration of atrazine in food matrices.
Talanta, 85, (1), 282-289, (2011)
   

atrazine

Xu SF et al., Preparation of hollow porous molecularly imprinted polymers and their applications to solid-phase extraction of triazines in soil samples.
Journal of Materials Chemistry, 21, (32), 12047-12053, (2011)
   

atrazine

Yaqub S et al., Plastic antibodies as chemical sensor material for atrazine detection.
Sensors and Actuators B: Chemical, 160, (1), 227-233, (2011)
   

atrazine

Zhang CJ et al., Piezoelectric atrazine sensor based on a molecularly imprinted film of titanium dioxide.
Microchimica Acta, 175, (1), 63-68, (2011)
   

atrazine

Ara B et al., Preparation and characterization of uniform molecularly imprinted polymer beads for separation of triazine herbicides.
Journal of Applied Polymer Science, 126, (1), 315-321, (2012)
   

atrazine

Bagheri H et al., Sol-gel-based molecularly imprinted xerogel for capillary microextraction.
Analytical and Bioanalytical Chemistry, 404, (5), 1597-1602, (2012)
   

atrazine

Chen J et al., Fabrication of Atrazine Molecularly Imprinted Polymer Microsphere by Two Step Seed Swelling Polymerization Method.
Journal of the Chinese Chemical Society, 59, (12), 1493-1499, (2012)
   

atrazine

Chen KY et al., Preparation and characterization of Atrazine molecularly imprinted polymer microspheres.
Journal of Lanzhou University (Natural Sciences), 48, (1), 117-122, (2012)
   

atrazine

Chen ZY et al., Controlling size and uniformity of molecularly imprinted nanoparticles using auxiliary template.
Journal of Molecular Recognition, 25, (6), 370-376, (2012)
   

atrazine

Djozan D et al., Inside-Needle Extraction Method Based on Molecularly Imprinted Polymer for Solid-Phase Dynamic Extraction and Preconcentration of Triazine Herbicides Followed by GC-FID Determination.
Chromatographia, 75, (3), 139-148, (2012)
   

atrazine

Lattach Y et al., Influence of the Chemical Functionalities of a Molecularly Imprinted Conducting Polymer on Its Sensing Properties: Electrochemical Measurements and Semiempirical DFT Calculations.
Journal of Physical Chemistry B, 116, (5), 1467-1481, (2012)
   

atrazine

Lattach Y et al., Molecularly imprinted surface acoustic wave sensors: The synergy of electrochemical and gravimetric transductions in chemical recognition processes.
Electrochimica Acta, 73, (1), 36-44, (2012)
   

atrazine

Lattach Y et al., Influence of Chemical and Structural Properties of Functionalized Polythiophene-Based Layers on Electrochemical Sensing of Atrazine.
ChemPhysChem, 13, (1), 281-290, (2012)
   

atrazine

Liu JB et al., Molecular Imprinted Interaction between Atrazine and TFMAA.
Journal of Jilin University Science Edition, 50, (4), 805-811, (2012)
   

atrazine

Liu JB et al., Theoretical researches on the recognizing characteristics of atrazine imprinted polymers with different functional monomers.
Chinese Journal of Structural Chemistry, 31, (12), 1794-1802, (2012)
   

atrazine

Men HF et al., Synthesis, properties and application research of atrazine Fe3O4@SiO2 magnetic molecularly imprinted polymer.
Environmental Science and Pollution Research, 19, (6), 2271-2280, (2012)
   

atrazine

Nagata T et al., Monodispersed Molecularly Imprinted Polymer Beads with Enhanced Atrazine Retention Ability Synthesized with Polymeric Diluents.
Analytical Letters, 45, (9), 977-985, (2012)
   

atrazine

Wen YY et al., Molecularly imprinted matrix solid-phase dispersion coupled to micellar electrokinetic chromatography for simultaneous determination of triazines in soil, fruit, and vegetable samples.
Electrophoresis, 33, (15), 2454-2463, (2012)
   

atrazine

Proceeding, Yan HY et al, Analysis of Cyanazine and Atrazine in Cucumber by Pseudo Imprinted Solid-Phase Extraction Coupled with Liquid Chromatography, 
In: Advanced Materials Research, Sung WP, Kao JCM, Chen R (Eds.), 289-292, (2012)
   

atrazine

Zhang CJ et al., Enhanced adsorption of atrazine from aqueous solution by molecularly imprinted TiO2 film.
Solid State Sciences, 14, (7), 777-781, (2012)
   

atrazine

Zhong QS et al., Online desorption of molecularly imprinted stir bar sorptive extraction coupled to high performance liquid chromatography for the trace analysis of triazines in rice.
Journal of Separation Science, 35, (23), 3396-3402, (2012)
   

atrazine

Cowieson D et al., Grafting of molecularly imprinted polymer to porous polyethylene filtration membranes by plasma polymerization.
Analytical and Bioanalytical Chemistry, 405, (20), 6489-6496, (2013)
   

atrazine

Gkementzoglou C et al., Synthesis of Novel Composite Membranes Based on Molecularly Imprinted Polymers for Removal of Triazine Herbicides from Water.
Industrial & Engineering Chemistry Research, 52, (39), 14001-14010, (2013)
   

atrazine

Gkementzoglou C et al., On the Synthesis of Molecularly Imprinted Polymers for Analytical and Sensor Applications.
Macromolecular Symposia, 331-332, (1), 26-33, (2013)
   

atrazine

Lakshmi D et al., Computational Design and Preparation of MIPs for Atrazine Recognition on a Conjugated Polymer-Coated Microtiter Plate.
Industrial & Engineering Chemistry Research, 52, (39), 13910-13916, (2013)
   

atrazine

Wang F et al., Selective screening of trace trazine herbicides in tomato samples employing dummy molecularly imprinted solid-phase extraction coupled with liquid chromatography.
Analytical Methods, 5, (9), 2398-2405, (2013)
   

atrazine

Zhang CJ et al., Kinetics of photocatalytic degradation of atrazine on molecularly imprinted titania film.
Asia-Pacific Journal of Chemical Engineering, 8, (3), 318-322, (2013)
   

atrazine

Andrade FN et al., Microextraction by packed sorbent liquid chromatography with time-of-flight mass spectrometry of triazines employing a molecularly imprinted polymer.
Journal of Separation Science, 37, (21), 3150-3156, (2014)
   

atrazine

Cha JH et al., Fabrication of micropatterned molecularly imprinted polymer thin films for detection of atrazine.
Abstracts of Papers of the American Chemical Society, 248, (Coll), 205-(2014)
   

atrazine

Chen J et al., Atrazine Molecular Imprinted Polymers: Comparative Analysis by Far-Infrared and Ultraviolet Induced Polymerization.
International Journal of Molecular Sciences, 15, (1), 574-587, (2014)
   

atrazine

Chen J et al., Novel Liquid-Liquid-Solid Microextraction Using Molecularly Imprinted Polymer Monolithic Fibres and Its Application to the Extraction of s-Triazine Herbicides from Water Samples.
Adsorption Science & Technology, 32, (4), 331-342, (2014)
   

atrazine

Chen J et al., Hollow-fiber membrane tube embedded with a molecularly imprinted monolithic bar for the microextraction of triazine pesticides.
Analytical Methods, 6, (2), 602-608, (2014)
   

atrazine

Li YB et al., Preparation of atrazine surface-imprinted material MIP-PSSS/SiO2 and study on its molecule recognition character.
Korean Journal of Chemical Engineering, 31, (5), 896-904, (2014)
   

atrazine

Qiao FX et al., Water-compatible magnetic imprinted microspheres for rapid separation and determination of triazine herbicides in environmental water.
Journal of Chromatography B, 957, 84-89, (2014)
   

atrazine

Royani I et al., Characterization of an atrazine molecularly imprinted polymer prepared by a cooling method.
AIP Conference Proceedings, 1589, 116-119, (2014)
   

atrazine

Proceeding, Royani I et al, Effect of Heating Time on Atrazine-Based MIP Materials Synthesized via the Cooling-Heating Method, 
In: Advanced Materials Research, Triyana K, Khairurrijal, Suryana R, Susanto H, Sutikno (Eds.), 89-94, (2014)
   

atrazine

Wang XY et al., Research on the properties of molecular imprinting polymers synthesized by seed swelling and polymerization method.
Journal of Shenyang Pharmaceutical University, 31, (2), 87-93, (2014)
   

atrazine

Xu D et al., Molecularly Imprinted Photonic Polymers as Sensing Elements for the Creation of Cross-Reactive Sensor Arrays.
Chemistry - A European Journal, 20, (50), 16620-16625, (2014)
   

atrazine

Xu SF et al., Double water compatible molecularly imprinted polymers applied as solid-phase extraction sorbent for selective preconcentration and determination of triazines in complicated water samples.
Journal of Chromatography A, 1350, 23-29, (2014)
   

atrazine

Zarejousheghani M et al., Selective mixed-bed solid phase extraction of atrazine herbicide from environmental water samples using molecularly imprinted polymer.
Talanta, 129, 132-138, (2014)
   

atrazine

Ahmad AL et al., Molecular imprinted polymer for atrazine detection sensor: preliminary study.
Chemical Engineering Transactions, 45, 1483-1488, (2015)
   

atrazine

Du XW et al., Synthesis and Application of Class-specific Molecularly Imprinted Polymer for Triazine Pesticides.
Journal of Instrumental Analysis, 34, (7), 755-761, (2015)
   

atrazine

Geng HR et al., A newly developed molecularly imprinted polymer on the surface of TiO2 for selective extraction of triazine herbicides residues in maize, water, and soil.
Analytical and Bioanalytical Chemistry, 407, (29), 8803-8812, (2015)
   

atrazine

Gupta VK et al., Selective QCM sensor based on atrazine imprinted polymer: Its application to wastewater sample.
Sensors and Actuators B: Chemical, 218, 215-221, (2015)
   

atrazine

Li X et al., Molecularly imprinted polymer-based sensors for atrazine detection by electropolymerization of o-phenylenediamine.
RSC Advances, 5, (70), 56534-56540, (2015)
   

atrazine

Liu GY et al., Preparation of a magnetic molecularly imprinted polymer using g-C3N4-Fe3O4 for atrazine adsorption.
Materials Letters, 160, 472-475, (2015)
   

atrazine

Liu HC et al., Magnetic mesoporous imprinted adsorbent based on Fe3O4-modified sepiolite for organic micropollutant removal from aqueous solution.
RSC Advances, 5, (34), 27034-27042, (2015)
   

atrazine

Ruggieri F et al., Development of molecularly imprinted polymeric nanofibers by electrospinning and applications to pesticide adsorption.
Journal of Separation Science, 38, (8), 1402-1410, (2015)
   

atrazine

Yang JC et al., Lithographically patterned molecularly imprinted polymer for gravimetric detection of trace atrazine.
Sensors and Actuators B: Chemical, 216, 476-481, (2015)
   

atrazine

Yu XB et al., Simulation and Preparation of Molecular Imprinting System with Atrazine as Template.
Chinese Journal of Structural Chemistry, 34, (4), 488-496, (2015)
   

atrazine

Zhang CJ et al., Design of molecularly imprinted TiO2/carbon aerogel electrode for the photoelectrochemical determination of atrazine.
Sensors and Actuators B: Chemical, 211, 206-212, (2015)
   

atrazine

Zhao Q et al., Determination triazine pesticides in cereal samples based on single-hole hollow molecularly imprinted microspheres.
Journal of Chromatography A, 1376, 26-34, (2015)
   

atrazine

Agrawal H et al., Surface plasmon resonance based optical fiber sensor for atrazine detection using molecular imprinting technique.
Sensors and Actuators B: Chemical, 227, 204-211, (2016)
   

atrazine

Andrade FN et al., Development of on-line molecularly imprinted solid phase extraction-liquid chromatography-mass spectrometry for triazine analysis in corn samples.
Analytical Methods, 8, (5), 1181-1186, (2016)
   

atrazine

Andrade FN et al., Determination of trace levels of triazines in corn matrices by bar adsorptive microextraction with a molecularly imprinted polymer.
Journal of Separation Science, 39, (4), 756-761, (2016)
   

atrazine

Barahona F et al., Molecularly imprinted polymer-coated hollow fiber membrane for the microextraction of triazines directly from environmental waters.
Journal of Chromatography A, 1442, 12-18, (2016)
   

atrazine

Díaz-Álvarez M et al., Molecularly imprinted polymer monolith containing magnetic nanoparticles for the stir-bar sorptive extraction of triazines from environmental soil samples.
Journal of Chromatography A, 1469, 1-7, (2016)
   

atrazine

Gkementzoglou C et al., Development of a sandwich-type filtration unit packed with MIP nanoparticles for removal of atrazine from water sources.
Chemical Engineering Journal, 287, 233-240, (2016)
   

atrazine

Lei PC et al., Molecularly imprinted polymer coated quantum dots as fluorescence probe for detection of atrazine in water samples.
Chinese Journal of Analysis Laboratory, 35, (5), 576-580, (2016)
   

atrazine

Li XP et al., Molecularly imprinted solid phase extraction in a syringe filter for determination of triazine herbicides in Radix Paeoniae Alba by ultra-fast liquid chromatography.
Talanta, 148, 539-547, (2016)
   

atrazine

Li XP et al., Molecularly Imprinted Dispersive Solid-Phase Extraction for the Determination of Triazine Herbicides in Grape Seeds by High-Performance Liquid Chromatography.
Journal of Chromatographic Science, 54, (5), 871-877, (2016)
   

atrazine

Liu GY et al., Competitive fluorescence assay for specific recognition of atrazine by magnetic molecularly imprinted polymer based on Fe3O4-chitosan.
Carbohydrate Polymers, 137, 75-81, (2016)
   

atrazine

Mosalam M et al., Removal of Atrazine Herbicide from Contaminated Water Using Molecularly Imprinted Nano-polymer.
Egyptian Journal of Chemical and Environmental Health, 2, (2), 490-499, (2016)
   

atrazine

Murase N et al., Molecularly imprinted polymers bearing spiropyran-based photoresponsive binding sites capable of photo-triggered switching for molecular recognition activity.
Journal of Polymer Science Part B: Polymer Physics, 54, (16), 1637-1644, (2016)
   

atrazine

Murray A et al., Removal of endocrine disrupting compounds from wastewater using polymer particles.
Water Science And Technology, 73, (1), 176-181, (2016)
   

atrazine

Sorouraddin SM et al., Development of molecularly imprinted-solid phase extraction combined with dispersive liquid-liquid microextraction for selective extraction and preconcentration of triazine herbicides from aqueous samples.
Journal of the Iranian Chemical Society, 13, (6), 1093-1104, (2016)
   

atrazine

Su LQ et al., Determination of Atrazine in Vegetables with Extraction by a Magnetite-Chitosan Molecularly Imprinted Polymer and Gas Chromatography.
Analytical Letters, 49, (14), 2177-2192, (2016)
   

atrazine

Turiel E et al., Supported liquid membrane-protected molecularly imprinted beads for the solid phase micro-extraction of triazines from environmental waters.
Journal of Chromatography A, 1432, 1-6, (2016)
   

atrazine

Wang AX et al., Preparation of Magnetic Hollow Molecularly Imprinted Polymers for Detection of Triazines in Food Samples.
Journal of Agricultural and Food Chemistry, 64, (24), 5110-5116, (2016)
   

atrazine

Yang JC et al., Polymeric Colloidal Nanostructures Fabricated via Highly Controlled Convective Assembly and Their Use for Molecular Imprinting.
ACS Applied Materials & Interfaces, 8, (11), 7381-7389, (2016)
   

atrazine

Zhou TY et al., Determination of triazine herbicides from honey samples based on hydrophilic molecularly imprinted resins followed by high performance liquid chromatography-tandem mass spectrometry.
RSC Advances, 6, (101), 98663-98673, (2016)
   

atrazine

Han Y et al., Computer-aided design of molecularly imprinted polymers for recognition of atrazine.
Computational and Theoretical Chemistry, 1121, 29-34, (2017)
   

atrazine

Kitayama Y et al., Post-Cross-Linked Molecular Imprinting with Functional Polymers as a Universal Building Block for Artificial Polymeric Receptors.
Macromolecules, 50, (19), 7526-7534, (2017)
   

atrazine

Patiño-Ropero MJ et al., Molecularly imprinted core-shell magnetic nanoparticles for selective extraction of triazines in soils.
Journal of Molecular Recognition, 30, (4), ArticleNoe2593-(2017)
   

atrazine

Saylan Y et al., Development of surface plasmon resonance sensors based on molecularly imprinted nanofilms for sensitive and selective detection of pesticides.
Sensors and Actuators B: Chemical, 241, 446-454, (2017)
   

atrazine

Yilmaz E et al., Plastic antibody based surface plasmon resonance nanosensors for selective atrazine detection.
Materials Science and Engineering: C, 73, 603-610, (2017)
   

atrazine

Yola ML et al., Electrochemical Detection of Atrazine by Platinum Nanoparticles/Carbon Nitride Nanotubes with Molecularly Imprinted Polymer.
Industrial & Engineering Chemistry Research, 56, (27), 7631-7639, (2017)
   

atrazine

Zhou TY et al., Preparation of magnetic superhydrophilic molecularly imprinted resins for detection of triazines in aqueous samples.
Journal of Chromatography A, 1497, 38-46, (2017)
   

atrazine

Ahmad AL et al., Configuration of molecular imprinted polymer for electrochemical atrazine detection.
Journal of Polymer Research, 25, (11), ArticleNo243-(2018)
   

atrazine

Akbulut-Söylemez M et al., Detailed positron annihilation lifetime spectroscopic investigation of atrazine imprinted polymers grafted onto PE/PP non-woven fabrics.
Journal of Molecular Recognition, 31, (1), ArticleNoe2676-(2018)
   

atrazine

Akbulut-Söylemez M et al., Method for preparing a well-defined molecularly imprinted polymeric system via radiation-induced RAFT polymerization.
European Polymer Journal, 103, 21-30, (2018)
   

atrazine

Asgari S et al., Imprinted silica nanofiber formation via sol-gel-electrospinning for selective micro solid phase extraction.
New Journal of Chemistry, 42, (16), 13864-13872, (2018)
   

atrazine

Díaz-Álvarez M et al., Hollow Fibre Membrane-Protected Molecularly Imprinted Microsolid-Phase Extraction (HFM-Protected-MI-MSPE) of Triazines from Soil Samples.
Separations, 5, (1), ArticleNo8-(2018)
   

atrazine

Gao BJ et al., Preparation and molecule-recognition characteristics of grafting type molecule-Imprinted membrane and potentiometric sensor for atrazine.
Sensors and Actuators B: Chemical, 254, 1048-1056, (2018)
   

atrazine

Kueseng P et al., Rapid preparation of molecularly imprinted polymers by custom-made microwave heating for analysis of atrazine in water.
Journal of Separation Science, 41, (13), 2783-2789, (2018)
   

atrazine

Li X et al., Synthesis of a molecularly imprinted polymer on mSiO2@Fe3O4 for the selective adsorption of atrazine.
Journal of Separation Science, 41, (13), 2837-2845, (2018)
   

atrazine

Zhou TY et al., Molecularly imprinted polymers combined with membrane-protected solid-phase extraction to detect triazines in tea samples.
Analytical and Bioanalytical Chemistry, 410, (21), 5173-5181, (2018)
   

atrazine

Atarodi H et al., Selective photodegradation of atrazine by a novel molecularly imprinted nanophotocatalyst prepared on the basis of chitosan.
Journal of Photochemistry and Photobiology A-Chemistry, 382, Article111892-(2019)
   

atrazine

Che Lah NF et al., The role of porogen-polymer complexation in atrazine imprinted polymer to work as an electrochemical sensor in water.
Journal of Environmental Chemical Engineering, 7, (6), Article103500-(2019)
   

atrazine

Chen JL et al., Separation and detection of trace atrazine from seawater using dummy-template molecularly imprinted solid-phase extraction followed by high-performance liquid chromatography.
Marine Pollution Bulletin, 149, Article110502-(2019)
   

atrazine

Guc M et al., The Application of the Microwave Plasma Ionization Source in Ambient Mass Spectrometry.
Plasma Chemistry and Plasma Processing, 39, (4), 1001-1017, (2019)
   

atrazine

Nsibande SA et al., Development of a quantum dot molecularly imprinted polymer sensor for fluorescence detection of atrazine.
Luminescence, 34, (5), 480-488, (2019)
   

atrazine

Royani I et al., The effect of atrazine concentration on galvanic cell potential based on molecularly imprinted polymers (MIPS) and aluminium as contact electrode.
Journal of Physics: Conference Series, 1282, (1), Article012029-(2019)
   

atrazine

Shi HJ et al., Mechanisim investigation on the enhanced and selective photoelectrochemical oxidation of atrazine on molecular imprinted mesoporous TiO2.
Applied Catalysis B: Environmental, 246, 50-60, (2019)
   

atrazine

Wang L et al., Determination of atrazine in vegetables by magnetic molecularly imprinted polymer flow injection preconcentration and gas chromatography.
Journal of Hygiene Research, 48, (2), 289-294, (2019)
   

atrazine

Wang SS et al., Dual-template imprinted polymers for class-selective solid-phase extraction of seventeen triazine herbicides and metabolites in agro-products.
Journal of Hazardous Materials, 367, 686-693, (2019)
   

atrazine

Zhang MX et al., Comparative analysis of atrazine molecularly imprinted polymers using acetonitrile and toluene as solvents.
Journal of Applied Polymer Science, 136, (11), Article47190-(2019)
   

atrazine

Zhao BW et al., Rapid determination of atrazine in apple juice using molecularly imprinted polymers coupled with gold nanoparticles-colorimetric/SERS dual chemosensor.
Food Chemistry, 276, 366-375, (2019)
   

atrazine

Turiel E et al., Surface modified-magnetic nanoparticles by molecular imprinting for the dispersive solid-phase extraction of triazines from environmental waters.
Journal of Separation Science, 43, (16), 3304-3314, (2020)
   

atrazine

Xing WD et al., Biomass Activated Carbon/SiO2-Based Imprinted Membranes for Selective Separation of Atrazine: A Synergistic Integration System.
ACS Sustainable Chemistry & Engineering, 8, (14), 5636-5647, (2020)
   

atrazine

Myburgh P et al., Selective Solid-Phase Extraction Using Molecularly Imprinted Polymers for the Analysis of Target Pesticides in Cannabis Bud.
South African Journal of Chemistry, 75, 142-149, (2021)
   

atrazine

Niu BL et al., Intermediate accumulation and toxicity reduction during the selective photoelectrochemical process of atrazine in complex water bodies.
Water Research, 205, Article117663-(2021)
   

atrazine

Wu XQ et al., Efficient enrichment and analysis of atrazine and its degradation products in Chinese Yam using accelerated solvent extraction and pipette tip solid-phase extraction followed by UPLC-DAD.
Food Chemistry, 337, Article127752-(2021)
   

atrazine

Xing WD et al., Novel Molecular Organic Framework Composite Molecularly Imprinted Nanofibrous Membranes with a Bioinspired Viscid Bead Structure for Selective Recognition and Separation of Atrazine.
ACS Applied Materials & Interfaces, 13, (24), 28749-28763, (2021)
   

Atrial Natriuretic Peptide

Wang CY et al., Preparation and Characterization of Molecularly Imprinted Polymeric Nanoparticles for Atrial Natriuretic Peptide (ANP).
Advanced Functional Materials, 21, (23), 4423-4429, (2011)
   

atrial natriuretic peptides

Lin CY et al., Detection of oxytocin, atrial natriuretic peptide, and brain natriuretic peptide using novel imprinted polymers produced with amphiphilic monomers.
Journal of Peptide Science, 25, (3), Article_e3150-(2019)
   

atropine

Nakamura M et al., Uniformly sized molecularly imprinted polymer for atropine and its application to the determination of atropine and scopolamine in pharmaceutical preparations containing Scopolia extract.
Journal of Pharmaceutical and Biomedical Analysis, 37, (2), 231-237, (2005)
   

atropine

Meng L et al., Molecularly imprinted photonic hydrogels for fast screening of atropine in biological samples with high sensitivity.
Forensic Science International, 231, (1-3), 6-12, (2013)
   

atropine

Abbasifar J et al., Selective Determination of Atropine Using poly Dopamine-Coated Molecularly Imprinted Mn-Doped ZnS Quantum Dots.
Journal of Fluorescence, 26, (5), 1645-1652, (2016)
   

atropine

Zeng SM et al., Analysis of Four Tropane Alkaloids in Przewalskia Tangutica Maxim.by Analogous-specific Molecularly Imprinted Solid-phase Extraction Combined with High Performance Liquid Chromatography.
Journal of Instrumental Analysis, 35, (4), 373-379, (2016)
   

atropine

Khataee A et al., Specific quantification of atropine using molecularly imprinted polymer on graphene quantum dots.
Spectrochimica Acta Part A-Molecular and Biomolecular Spctroscopy, 205, 614-621, (2018)
   

atropine

Bagheri N et al., Application of surface molecular imprinted magnetic graphene oxide and high performance mimetic behavior of bi-metal ZnCo MOF for determination of atropine in human serum.
Talanta, 201, 286-294, (2019)
   

atropine

Sun JY et al., Rational design of a mesoporous silica@ZIF-8 based molecularly imprinted electrochemical sensor with high sensitivity and selectivity for atropine monitoring.
Journal of Electroanalytical Chemistry, 903, Article115843-(2021)
   

atropine sulfate

Peng H et al., Development of a new atropine sulfate bulk acoustic wave sensor based on a molecularly imprinted electrosynthesized copolymer of aniline with o-phenylenediamine.
Analytica Chimica Acta, 423, (2), 221-228, (2000)
   

A-type procyanidins

Schwarz LJ et al., Sequential molecularly imprinted solid-phase extraction methods for the analysis of resveratrol and other polyphenols.
Journal of Chromatography A, 1438, 22-30, (2016)
   

ATZ

Lattach Y et al., Influence of the Chemical Functionalities of a Molecularly Imprinted Conducting Polymer on Its Sensing Properties: Electrochemical Measurements and Semiempirical DFT Calculations.
Journal of Physical Chemistry B, 116, (5), 1467-1481, (2012)
   

ATZ

Lattach Y et al., Molecularly imprinted surface acoustic wave sensors: The synergy of electrochemical and gravimetric transductions in chemical recognition processes.
Electrochimica Acta, 73, (1), 36-44, (2012)
   

ATZ

Li X et al., Molecularly imprinted polymer-based sensors for atrazine detection by electropolymerization of o-phenylenediamine.
RSC Advances, 5, (70), 56534-56540, (2015)
   

ATZ

Mosalam M et al., Removal of Atrazine Herbicide from Contaminated Water Using Molecularly Imprinted Nano-polymer.
Egyptian Journal of Chemical and Environmental Health, 2, (2), 490-499, (2016)
   

ATZ

Saylan Y et al., Development of surface plasmon resonance sensors based on molecularly imprinted nanofilms for sensitive and selective detection of pesticides.
Sensors and Actuators B: Chemical, 241, 446-454, (2017)
   

ATZ

Díaz-Álvarez M et al., Hollow Fibre Membrane-Protected Molecularly Imprinted Microsolid-Phase Extraction (HFM-Protected-MI-MSPE) of Triazines from Soil Samples.
Separations, 5, (1), ArticleNo8-(2018)
   

ATZ

Niu BL et al., Intermediate accumulation and toxicity reduction during the selective photoelectrochemical process of atrazine in complex water bodies.
Water Research, 205, Article117663-(2021)
   

ATZ

Xing WD et al., Novel Molecular Organic Framework Composite Molecularly Imprinted Nanofibrous Membranes with a Bioinspired Viscid Bead Structure for Selective Recognition and Separation of Atrazine.
ACS Applied Materials & Interfaces, 13, (24), 28749-28763, (2021)
   

AuCl4-

Li M et al., Preparation of Surface Imprinted Polymer D301-g-IIPDMC and its Recognition Selectivity Performance towards AuCl4-.
Bulletin of the Korean Chemical Society, 39, (1), 58-64, (2018)
   

Au(III)

Baba Y et al., A Quantitative Consideration for Template Effect of Palladium(II) Using N-[Pyridylmethyl] Chitosan.
Solvent Extraction and Ion Exchange, 29, (3), 509-517, (2011)
   

Au(III)

Ebrahimzadeh H et al., Novel magnetic ion imprinted polymer as a highly selective sorbent for extraction of gold ions in aqueous samples.
Analytical Methods, 4, (10), 3232-3237, (2012)
   

Au(III)

Proceeding, Moazzen E et al, Novel ion imprinted polymer coated Fe3O4 nano-particles as a high selective sorbent for solid phase extraction of gold ion, 
1450-1452, (2012)
   

Au(III)

Ahamed MEH et al., Selective extraction of gold(III) from metal chloride mixtures using ethylenediamine N-(2-(1-imidazolyl)ethyl) chitosan ion-imprinted polymer.
Hydrometallurgy, 140, 1-13, (2013)
   

Au(III)

Ebrahimzadeh H et al., Novel ion imprinted polymer coated multiwalled carbon nanotubes as a high selective sorbent for determination of gold ions in environmental samples.
Chemical Engineering Journal, 215-216, 315-321, (2013)
   

Au(III)

Moazzen E et al., A high selective ion-imprinted polymer grafted on a novel nanoporous material for efficient gold extraction.
Journal of Separation Science, 36, (11), 1826-1833, (2013)
   

Au(III)

Sakti SCW et al., Adsorption of gold(III) on ionic imprinted amino-silica hybrid prepared from rice hull ash.
Pure And Applied Chemistry, 85, (1), 211-223, (2013)
   

Au(III)

Monier M et al., Preparation and characterization of selective phenyl thiosemicarbazide modified Au(III) ion-imprinted cellulosic cotton fibers.
Journal of Applied Polymer Science, 131, (18), Article No 40769-(2014)
   

Au(III)

Firlak M et al., Recovery of Au(III) ions by Au(III)-imprinted hydrogel.
Chemical Papers, 70, (6), 757-768, (2016)
   

Au(III)

Monier M et al., Fabrication of Au(III) ion-imprinted polymer based on thiol-modified chitosan.
International Journal of Biological Macromolecules, 105, (Part 1), 777-787, (2017)
   

Au(III)

Dobrzynska J et al., An ion-imprinted thiocyanato-functionalized mesoporous silica for preconcentration of gold(III) prior to its quantitation by slurry sampling graphite furnace AAS.
Microchimica Acta, 185, (12), Article564-(2018)
   

Au(III)

Zhao BS et al., Poly(1-vinylimidazole) functionalized magnetic ion imprinted polymer for fast and selective extraction of trace gold in geological, environmental and biological samples followed by graphite furnace atomic absorption spectrometry detection.
Spectrochimica Acta Part B-Atomic Spectroscopy, 143, 32-41, (2018)
   

Au(III)

Alotaibi MR et al., Fabrication and investigation of gold (III) ion-imprinted functionalized silica particles.
Journal of Molecular Recognition, 33, (2), Article_e2813-(2020)
   

AU(III)

Hua Y et al., Hybrid monolith assisted magnetic ion-imprinted polymer extraction coupled with ICP-MS for determination of trace Au(III) in environmental and mineral samples.
Microchemical Journal, 158, Article105210-(2020)
   

AuNPs

Bruchiel-Spanier N et al., Electrochemically Deposited Sol-Gel Based Nanoparticle-Imprinted Matrices for the Size-Selective Detection of Gold Nanoparticles.
ACS Applied Nano Materials, 1, (10), 5612-5619, (2018)
   

AuNPs

Bruchiel-Spanier N et al., Effect of matrix-nanoparticle interactions on recognition of aryldiazonium nanoparticle-imprinted matrices.
Nano Research, 12, (2), 265-271, (2019)
   

auramine O

Li JM et al., Preparation and evaluation of a novel molecularly imprinted SPE monolithic capillary column for the determination of auramine O in shrimp.
Journal of Separation Science, 36, (21-22), 3608-3614, (2013)
   

auramine O

Zhai HY et al., A glass/PDMS electrophoresis microchip embedded with molecular imprinting SPE monolith for contactless conductivity detection.
Microchemical Journal, 114, 223-228, (2014)
   

auramine O

Yang WW et al., Preparation of stoichiometric molecularly imprinted polymer coatings on magnetic particles for the selective extraction of auramine O from water.
Journal of Separation Science, 41, (22), 4185-4193, (2018)
   

auramine O

Pataer P et al., Preparation of a stoichiometric molecularly imprinted polymer for auramine O and application in solid-phase extraction.
Journal of Separation Science, 42, (8), 1634-1643, (2019)
   

auraptene

Eidi S et al., Selective isolation of sesquiterpene coumarins from asafoetida using dummy molecularly imprinted solid phase extraction method.
Journal of Chromatography B, 1138, Article121943-(2020)
   

autoinducer

Motib A et al., Modulation of Quorum Sensing in a Gram-Positive Pathogen by Linear Molecularly Imprinted Polymers with Anti-infective Properties.
Angewandte Chemie International Edition, 56, (52), 16555-16558, (2017)
   

autoinducer

Ma LY et al., Development of Molecularly Imprinted Polymers To Block Quorum Sensing and Inhibit Bacterial Biofilm Formation.
ACS Applied Materials & Interfaces, 10, (22), 18450-18457, (2018)
   

automotive engine oil

Proceeding, Lieberzeit PA et al, Acoustic chemosensors for real-life environments, 
431-433, (2008)
   

automotive engine oil

Mujahid A et al., Imprinted sol-gel materials for monitoring degradation products in automotive oils by shear transverse wave.
Analytica Chimica Acta, 675, (1), 53-57, (2010)
   

auxiliary template

Chen ZY et al., Controlling size and uniformity of molecularly imprinted nanoparticles using auxiliary template.
Journal of Molecular Recognition, 25, (6), 370-376, (2012)
   

auxin

Zhang Y et al., Preparation of magnetic indole-3-acetic acid imprinted polymer beads with 4-vinylpyridine and β-cyclodextrin as binary monomer via microwave heating initiated polymerization and their application to trace analysis of auxins in plant tissues.
Journal of Chromatography A, 1217, (47), 7337-7344, (2010)
   

auxin

Li SS et al., Preparation of a multi-hollow magnetic molecularly imprinted polymer for the selective enrichment of indolebutyric acid.
Journal of Separation Science, 38, (15), 2573-2579, (2015)
   

auxin

Chang JH et al., A Simple and Selective Fluorescent Sensor Chip for Indole-3-Butyric Acid in Mung Bean Sprouts Based on Molecularly Imprinted Polymer Coatings.
Sensors, 17, (9), ArticleNo1954-(2017)
   

auxin

Zhang Q et al., Preparation and application of molecularly imprinted polymer solid-phase microextraction fiber for the selective analysis of auxins in tobacco.
Journal of Separation Science, 42, (16), 2687-2695, (2019)
   

auxins

Hu YL et al., Development of sample preparation method for auxin analysis in plants by vacuum microwave-assisted extraction combined with molecularly imprinted clean-up procedure.
Analytical and Bioanalytical Chemistry, 399, (10), 3367-3374, (2011)
   

auxins

Yan HY et al., Miniaturized molecularly imprinted matrix solid-phase dispersion coupled with high performance liquid chromatography for rapid determination of auxins in orange samples.
Journal of Chromatography A, 1256, 1-8, (2012)
   

avenanthramide

Yuan XY et al., Molecularly Imprinted Dual-Responsive Extraction for Avenanthramides Using Covalent Organic Frameworks Doped with Polyethyleneimine-Modified Mn-ZnS Quantum Dots.
Food Analytical Methods, 14, (7), 1336-1344, (2021)
   

avermectin

Tom LA et al., Development of a molecularly imprinted polymer for the analysis of avermectin.
Analytica Chimica Acta, 680, (1-2), 79-85, (2010)
   

avermectin

Zhang Y et al., Preparation of Avermectin Molecularly Imprinted Polymer Microspheres and Their Adsorption Properties.
Asian Journal of Chemistry, 25, (3), 1679-1683, (2013)
   

avermectin

You XX et al., Preparation of magnetic molecularly imprinted polymers by atom transfer radical polymerization for the rapid extraction of avermectin from fish samples.
Journal of Separation Science, 40, (2), 424-430, (2017)
   

Av-FITC

Orozco J et al., Molecularly Imprinted Polymer-Based Catalytic Micromotors for Selective Protein Transport.
Journal of the American Chemical Society, 135, (14), 5336-5339, (2013)
   

avidin

Menaker A et al., Electrosynthesized Surface-Imprinted Conducting Polymer Microrods for Selective Protein Recognition.
Advanced Materials, 21, (22), 2271-2275, (2009)
   

avidin

Lautner G et al., Selective Artificial Receptors Based on Micropatterned Surface-Imprinted Polymers for Label-Free Detection of Proteins by SPR Imaging.
Advanced Functional Materials, 21, (3), 591-597, (2011)
   

avidin

Bognár J et al., Nanosphere Lithography as a Versatile Method to Generate Surface-Imprinted Polymer Films for Selective Protein Recognition.
Advanced Functional Materials, 23, (37), 4703-4709, (2013)
   

avidin

Ceolin G et al., Electrochemical template synthesis of protein-imprinted magnetic polymer microrods.
Journal of Materials Science, 48, (15), 5209-5218, (2013)
   

avidin

Orozco J et al., Molecularly Imprinted Polymer-Based Catalytic Micromotors for Selective Protein Transport.
Journal of the American Chemical Society, 135, (14), 5336-5339, (2013)
   

avidin

Erdossy J et al., Enzymatic digestion as a tool for removing proteinaceous templates from molecularly imprinted polymers.
Analytical Methods, 9, (31), 4496-4503, (2017)
   

AXI

Cetinkaya A et al., A molecularly imprinted electrochemical sensor based on highly selective and an ultra-trace assay of anti-cancer drug axitinib in its dosage form and biological samples.
Talanta, 233, Article122569-(2021)
   

axitinib

Cetinkaya A et al., A molecularly imprinted electrochemical sensor based on highly selective and an ultra-trace assay of anti-cancer drug axitinib in its dosage form and biological samples.
Talanta, 233, Article122569-(2021)
   

AYLKKATNE

Zhang XY et al., Preparation of magnetic epitope imprinted polymer microspheres using cyclodextrin-based ionic liquids as functional monomer for highly selective and effective enrichment of cytochrome c.
Chemical Engineering Journal, 317, 988-998, (2017)
   

AYLKKATNE

Zhang XM et al., Silicon nanoparticles coated with an epitope-imprinted polymer for fluorometric determination of cytochrome c.
Microchimica Acta, 185, (3), ArticleNo173-(2018)
   

AZA

Feás X et al., Syntheses of molecularly imprinted polymers: Molecular recognition of cyproheptadine using original print molecules and azatadine as dummy templates.
Analytica Chimica Acta, 631, (2), 237-244, (2009)
   

azamethiphos

Andrade Teixeira R et al., Efficient and selective extraction of azamethiphos and chlorpyrifos residues from mineral water and grape samples using magnetic mesoporous molecularly imprinted polymer.
Food Chemistry, 361, Article130116-(2021)
   

azatadine

Feás X et al., Syntheses of molecularly imprinted polymers: Molecular recognition of cyproheptadine using original print molecules and azatadine as dummy templates.
Analytica Chimica Acta, 631, (2), 237-244, (2009)
   

azathioprine

Davarani SSH et al., Highly selective solid phase extraction and preconcentration of Azathioprine with nano-sized imprinted polymer based on multivariate optimization and its trace determination in biological and pharmaceutical samples.
Materials Science and Engineering: C, 71, 572-583, (2017)
   

azathioprine

Alaei HS et al., Photo-regulated ultraselective extraction of Azatioprine using a novel photoresponsive molecularly imprinted polymer conjugated hyperbranched polymers based magnetic nano-particles.
Polymer, 148, 191-201, (2018)
   

azathioprine

Alaei HS et al., Photoresponsive molecularly imprinted dendrimer-based magnetic nanoparticles for photo-regulated selective separation of azathioprine.
Reactive and Functional Polymers, 136, 58-65, (2019)
   

AZI

Song XQ et al., Molecularly imprinted solid-phase extraction for the determination of ten macrolide drugs residues in animal muscles by liquid chromatography-tandem mass spectrometry.
Food Chemistry, 208, 169-176, (2016)
   

AZI

Song XQ et al., Determination of Ten Macrolide Drugs in Environmental Water Using Molecularly Imprinted Solid-Phase Extraction Coupled with Liquid Chromatography-Tandem Mass Spectrometry.
Molecules, 23, (5), ArticleNo1172-(2018)
   

AZI

Song XQ et al., Preparation and Application of Molecularly Imprinted Monolithic Extraction Column for the Selective Microextraction of Multiple Macrolide Antibiotics from Animal Muscles.
Polymers, 11, (7), ArticleNo1109-(2019)
   

azidothymidine

Hassanpour A et al., Increasing the anticancer activity of azidothymidine toward the breast cancer via rational design of magnetic drug carrier based on molecular imprinting technology.
Materials Science and Engineering: C, 103, Article109771-(2019)
   

Azin

Abu-Dalo MA et al., Azithromycin-molecularly imprinted polymer based on PVC membrane for Azithromycin determination in drugs using coated graphite electrode.
Journal of Electroanalytical Chemistry, 751, 75-79, (2015)
   

2,2’-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)diammonium salt

Zhang ZJ et al., Molecular Imprinting on Inorganic Nanozymes for Hundred-fold Enzyme Specificity.
Journal of the American Chemical Society, 139, (15), 5412-5419, (2017)
   

azinphos

Azab HA et al., Luminescence recognition of different organophosphorus pesticides by the luminescent Eu(III)-pyridine-2,6-dicarboxylic acid probe.
Analytica Chimica Acta, 759, 81-91, (2013)
   

azithromycin

Darabi HR et al., Synthesis and evaluation of a molecularly imprinted polymer nanospheres for the effective recognition of azithromycin.
Drug Discovery International, 1, (1), Art 19-(2012)
   

Azithromycin

Abu-Dalo MA et al., Azithromycin-molecularly imprinted polymer based on PVC membrane for Azithromycin determination in drugs using coated graphite electrode.
Journal of Electroanalytical Chemistry, 751, 75-79, (2015)
   

azithromycin

Sheybani S et al., Mesoporous molecularly imprinted polymer nanoparticles as a sustained release system of azithromycin.
RSC Advances, 5, (120), 98880-98891, (2015)
   

azithromycin

Song XQ et al., Molecularly imprinted solid-phase extraction for the determination of ten macrolide drugs residues in animal muscles by liquid chromatography-tandem mass spectrometry.
Food Chemistry, 208, 169-176, (2016)
   

azithromycin

Zhou T et al., Determination of azithromycin residue in pork using a molecularly imprinted monolithic microcolumn coupled to liquid chromatography with tandem mass spectrometry.
Journal of Separation Science, 39, (7), 1339-1346, (2016)
   

azithromycin

Zhou TT et al., Fabrication of a Selective and Sensitive Sensor Based on Molecularly Imprinted Polymer/Acetylene Black for the Determination of Azithromycin in Pharmaceuticals and Biological Samples.
PLoS ONE, 11, (1), ArticleIDe0147002-(2016)
   

azithromycin

Hu LQ et al., A rapid and sensitive molecularly imprinted electrochemiluminescence sensor for Azithromycin determination in biological samples.
Journal of Electroanalytical Chemistry, 813, 1-8, (2018)
   

azithromycin

Jafari S et al., An azithromycin electrochemical sensor based on an aniline MIP film electropolymerized on a gold nano urchins/graphene oxide modified glassy carbon electrode.
Journal of Electroanalytical Chemistry, 829, 27-34, (2018)
   

azithromycin

Ji SL et al., A hollow porous molecularly imprinted polymer as a sorbent for the extraction of 7 macrolide antibiotics prior to their determination by HPLC-MS/MS.
Microchimica Acta, 185, (3), ArticleNo203-(2018)
   

azithromycin

Song XQ et al., Determination of Ten Macrolide Drugs in Environmental Water Using Molecularly Imprinted Solid-Phase Extraction Coupled with Liquid Chromatography-Tandem Mass Spectrometry.
Molecules, 23, (5), ArticleNo1172-(2018)
   

azithromycin

Song XQ et al., Determination of macrolide antibiotics residues in pork using molecularly imprinted dispersive solid-phase extraction coupled with LC-MS/MS.
Journal of Separation Science, 41, (5), 1138-1148, (2018)
   

azithromycin

Song XQ et al., Preparation and Application of Molecularly Imprinted Monolithic Extraction Column for the Selective Microextraction of Multiple Macrolide Antibiotics from Animal Muscles.
Polymers, 11, (7), ArticleNo1109-(2019)
   

azithromycin

Rebelo P et al., Azithromycin electrochemical detection using a molecularly imprinted polymer prepared on a disposable screen-printed electrode.
Analytical Methods, 12, (11), 1486-1494, (2020)
   

azithromycin

Pan Y et al., Developing a generally applicable electrochemical sensor for detecting macrolides in water with thiophene-based molecularly imprinted polymers.
Water Research, 205, Article117670-(2021)
   

AZM

Sheybani S et al., Mesoporous molecularly imprinted polymer nanoparticles as a sustained release system of azithromycin.
RSC Advances, 5, (120), 98880-98891, (2015)
   

AZM

Zhou TT et al., Fabrication of a Selective and Sensitive Sensor Based on Molecularly Imprinted Polymer/Acetylene Black for the Determination of Azithromycin in Pharmaceuticals and Biological Samples.
PLoS ONE, 11, (1), ArticleIDe0147002-(2016)
   

AZM

Hu LQ et al., A rapid and sensitive molecularly imprinted electrochemiluminescence sensor for Azithromycin determination in biological samples.
Journal of Electroanalytical Chemistry, 813, 1-8, (2018)
   

AZN

Pan Y et al., Developing a generally applicable electrochemical sensor for detecting macrolides in water with thiophene-based molecularly imprinted polymers.
Water Research, 205, Article117670-(2021)
   

AZO

Baeza AN et al., Multiresidue analysis of cephalosporin antibiotics in bovine milk based on molecularly imprinted polymer extraction followed by liquid chromatography-tandem mass spectrometry.
Journal of Chromatography A, 1474, 121-129, (2016)
   

AzoCO2H

Yang DH et al., Facile fabrication of molecularly imprinted cavities in spin-coated TiO2 nanofilms.
Chemistry Letters, 34, (12), 1686-1687, (2005)
   

azo dyes

Long ZR et al., Selective recognition and discrimination of water-soluble azo dyes by a seven-channel molecularly imprinted polymer sensor array.
Journal of Separation Science, 37, (19), 2764-2770, (2014)
   

azo dyes

Söylemez MA et al., Synthesis of well-defined molecularly imprinted bulk polymers for the removal of azo dyes from water resources.
Current Research in Green and Sustainable Chemistry, 4, Article100196-(2021)
   

Azorubin E122

Ghasempour Z et al., Synthesis of a molecularly imprinted polymer for the selective recognition of carmoisine (Azorubin E122) from pomegranate juice.
Journal of Separation Science, 40, (4), 962-970, (2017)
   

azorubine

Piri S et al., Imprinted Azorubine electrochemical sensor based upon composition of MnO2 and 1-naphthylamine on graphite nanopowder.
Journal of the Iranian Chemical Society, 15, (12), 2713-2720, (2018)
   

azoxystrobin

Liu XX et al., Hydrophilic molecularly imprinted dispersive solid-phase extraction coupled with liquid chromatography for determination of azoxystrobin residues in cucumber.
Iranian Polymer Journal, 28, (9), 725-734, (2019)
   

AZT

Duy SV et al., Molecularly imprinted polymer for analysis of zidovudine and stavudine in human serum by liquid chromatography-mass spectrometry.
Journal of Chromatography B, 877, (11-12), 1101-1108, (2009)
   

AZT

Zeng HH et al., Study of zidovudine molecularly imprinted polymers applied to solid phase extraction.
Chinese Journal of Pharmaceutical Analysis, 30, (4), 686-690, (2010)
   

AZT

Muhammad T et al., Rational design of molecularly imprinted polymer: the choice of cross-linker.
Analyst, 137, (11), 2623-2628, (2012)
   

AZT

Zohre N et al., Dummy-template molecularly imprinted polymer for selective solid-phase extraction of zidovudine in human serum.
Chinese Journal of Analysis Laboratory, 32, (5), 6-10, (2013)
   

AZT

Jafari S et al., An azithromycin electrochemical sensor based on an aniline MIP film electropolymerized on a gold nano urchins/graphene oxide modified glassy carbon electrode.
Journal of Electroanalytical Chemistry, 829, 27-34, (2018)
   

AZT

Simões NS et al., Hollow mesoporous structured molecularly imprinted polymer as adsorbent in pipette-tip solid-phase extraction for the determination of antiretrovirals from plasma of HIV-infected patients.
Electrophoresis, 39, (20), 2581-2589, (2018)
   

AZT

Singh K et al., One-by-one imprinting in two eccentric layers of hollow core-shells: Sequential electroanalysis of anti-HIV drugs.
Biosensors and Bioelectronics, 111, 82-89, (2018)
   

AZT

Hassanpour A et al., Increasing the anticancer activity of azidothymidine toward the breast cancer via rational design of magnetic drug carrier based on molecular imprinting technology.
Materials Science and Engineering: C, 103, Article109771-(2019)
   

AZT-ES

Muhammad T et al., Rational design of molecularly imprinted polymer: the choice of cross-linker.
Analyst, 137, (11), 2623-2628, (2012)
   

AZY

Rebelo P et al., Azithromycin electrochemical detection using a molecularly imprinted polymer prepared on a disposable screen-printed electrode.
Analytical Methods, 12, (11), 1486-1494, (2020)
   

top

 








 

Join the Society for Molecular Imprinting
Logo of the Society for Molecular Imprinting

New items RSS feed
new items RSS feed  View latest updates

Sign-up for e-mail updates:
Choose between receiving an occasional newsletter or more frequent e-mail alerts.
Click here to go to the sign-up page.


Is your name elemental or peptidic? Enter your name and find out by clicking either of the buttons below!
Other products you may like:
view listings for MIP books on eBay:



Mickey Mouse 90th Anniversary banner