This file last updated: 13/12/2021

M S

Goud KY et al., Development of highly selective electrochemical impedance sensor for detection of sub-micromolar concentrations of 5-Chloro-2, 4-dinitrotoluene.
Journal of Chemical Sciences, 128, (5), 763-770, (2016)
   

Ma BB

Wu YZ et al., Preparation of a surface molecularly imprinted fiber for bisphenol A recognition.
Journal of Polymer Research, 21, (6), Article No 468-(2014)
   

Ma BL

Wang Q et al., An Ultrahighly Sensitive Electrochemical Biosensor for Cytochrome c with Surface Molecular Imprinting Based on Hybrid Nanomaterials.
International Journal of Electrochemical Science, 15, 990-1004, (2020)
   

Ma C

Zhou JF et al., Preparation, evaluation and application of molecularly imprinted solid-phase microextraction monolith for selective extraction of pirimicarb in tomato and pear.
Journal of Chromatography A, 1217, (48), 7478-7483, (2010)
   

Ma C et al., Application of parathion MIPs in solid-phase extraction.
Chinese Journal of Analysis Laboratory, 30, (3), 43-45, (2011)
   

Ma C et al., Preparation of malathion imprinted polymer and its application for solid-phase extraction.
Chinese Journal of Analysis Laboratory, 30, (7), 58-61, (2011)
   

Ma C et al., Preparation of Molecularly Imprinted Polymer Monolith with an Analogue of Thiamphenicol and Application to Selective Solid-Phase Microextraction.
Food Analytical Methods, 5, (6), 1267-1275, (2012)
   

Zhang T et al., Selective microextraction of carbaryl and naproxen using organic-inorganic monolithic columns containing a double molecular imprint.
Microchimica Acta, 180, (7-8), 695-702, (2013)
   

Yang T et al., A molecularly imprinted organic-inorganic hybrid monolithic column for the selective extraction and HPLC determination of isoprocarb residues in rice.
Journal of Separation Science, 37, (5), 587-594, (2014)
   

Zhu QF et al., A molecular imprint-coated stirrer bar for selective extraction of caffeine, theobromine and theophylline.
Microchimica Acta, 181, (3-4), 303-311, (2014)
   

Ge SG et al., One novel molecular imprinting nanowires chemiluminescence sensor: preparation and pendimethalin recognition.
Monatshefte für Chemie - Chemical Monthly, 146, (3), 493-499, (2015)
   

Zhang YD et al., Magnetic fluorescent molecularly imprinted nanoparticles for detection and separation of transferrin in human serum.
Talanta, 188, 540-545, (2018)
   

Zhang YD et al., Molecularly imprinted gelatin nanoparticles for DNA delivery and in-situ fluorescence imaging of telomerase activity.
Microchimica Acta, 186, (9), Article610-(2019)
   

Gao PW et al., High-sensitivity photo-electrochemical heterostructure of the cuprous oxide-metal organic framework for a dioctyl phthalate molecularly imprinted sensor.
Analyst, 146, (20), 6178-6186, (2021)
   

Zhao QY et al., Synthesis of magnetic covalent organic framework molecularly imprinted polymers at room temperature: A novel imprinted strategy for thermo-sensitive substance.
Talanta, 225, Article121958-(2021)
   

Ma CC

Liu XL et al., Microwave-assisted synthesis of selective degradation photocatalyst by surface molecular imprinting method for the degradation of tetracycline onto ClTiO2.
Chemical Engineering Journal, 217, 398-406, (2013)
   

Liu XL et al., Selective degradation of ciprofloxacin with modified NaCl/TiO2 photocatalyst by surface molecular imprinted technology.
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 441, 420-426, (2014)
   

Shao HH et al., An ion-imprinted material embedded carbon quantum dots for selective fluorometric determination of lithium ion in water samples.
Microchimica Acta, 184, (12), 4861-4868, (2017)
   

Lu ZY et al., Pollutant template method synthesis of oxygen vacancy and template cavity riched TB-TiO2@MFA towards selective photodegradation of ciprofloxacin.
Applied Surface Science, 569, Article151027-(2021)
   

Lu ZY et al., Heterotopic reaction strategy for enhancing selective reduction and synergistic oxidation ability through trapping Cr (VI) into specific reaction site: A stable and self-cleaning ion imprinted CdS/HTNW photocatalytic membrane.
Applied Catalysis B: Environmental, 301, Article120787-(2022)
   

Yan H et al., Aqueous-phase synthesis of heterojunction molecular imprinted photocatalytic nanoreactor via stable interaction forces for improved selectivity and photocatalytic property.
Applied Surface Science, 579, Article152174-(2022)
   

Ma CL

Wang XW et al., Enrichment and separation of silver from waste solutions by metal ion imprinted membrane.
Hydrometallurgy, 100, (1-2), 82-86, (2009)
   

Zhang L et al., Improvement of Ag(I) adsorption onto chitosan/triethanolamine composite sorbent by an ion-imprinted technology.
Applied Surface Science, 263, 696-703, (2012)
   

Ma CP

Ma CP et al., Determination of trichlorfon based on flow injection-chemiluminescence molecularly imprinted technique.
Chinese Journal of Analysis Laboratory, 30, (4), 107-110, (2011)
   

Ma CY

Chen JY et al., The synthesis of a dual-template surface molecularly imprinted polymer based on silica gel and its application in the removal of pesticides from tea polyphenols.
Analytical Methods, 12, (7), 996-1004, (2020)
   

Chen JY et al., Dummy template surface molecularly imprinted polymers based on silica gel for removing imidacloprid and acetamiprid in tea polyphenols.
Journal of Separation Science, 43, (12), 2467-2476, (2020)
   

Ma D

Lu XF et al., Preparation and characterization of molecularly imprinted poly(hydroxyethyl methacrylate) microspheres for sustained release of gatifloxacin.
Journal of Materials Science: Materials in Medicine, 25, (6), 1461-1469, (2014)
   

Ma DJ

Yu JH et al., Hydrolysis of carboxylate ester catalyzed by a new artificial abzyme based on molecularly imprinted polymer.
Progress in Natural Science, 11, (7), 516-519, (2001)
   

Ma DS

Zhao PN et al., Determination of glyphosate in foodstuff by one novel chemiluminescence-molecular imprinting sensor.
Spectrochimica Acta Part A-Molecular and Biomolecular Spctroscopy, 78, (5), 1482-1486, (2011)
   

Ma F

Zheng HY et al., Molecular simulation for preparation of molecularly imprinted polymers of salicylic acid by using different functional monomers.
Computers and Applied Chemistry, 25, (12), 1577-1580, (2008)
   

Ma F et al., A molecularly imprinted electrochemical sensor for simultaneous detection of dopamine and ascorbic acid.
Chinese Journal of Analysis Laboratory, 33, (11), 1255-1259, (2014)
   

Li JP et al., A highly selective molecularly imprinted electrochemiluminescence sensor for ultra-trace beryllium detection.
Analytica Chimica Acta, 871, 51-56, (2015)
   

Ma FC

Ma FC et al., Ultrasensitive Detection of Malachite Green Using the Coupling Technique of Dummy Molecular Imprinting and Surface-enhanced Raman Scattering.
Chemical Journal of Chinese Universities, 38, (8), 1347-1353, (2017)
   

Ma FG

Wu YL et al., Mixed matrix nanocomposite imprinted membranes with multilevel hierarchical structure for high-efficiency selective recognition and separation: A bioinspired dual-imprinted strategy.
Microporous And Mesoporous Materials, 326, Article111393-(2021)
   

Wu YL et al., Dual-imprinted mixed matrix membranes for selective recognition and separation: A synergetic imprinting strategy based on complex initiation system.
Journal of Colloid and Interface Science, 606, 87-100, (2022)
   

Yan M et al., Polydopamine-based multilevel molecularly imprinted nanocomposite membranes comprising metal organic frameworks for selective recognition and separation.
Journal of Colloid and Interface Science, 606, 696-708, (2022)
   

Ma FY

Meng H et al., Synthesis of a highly dense and selective imprinted polymer via pre-irradiated surface-initiated graft polymerization.
Journal of Materials Chemistry A, 3, (25), 13237-13243, (2015)
   

Meng H et al., Synthesis and characterization of surface ion-imprinted polymer based on SiO2-coated graphene oxide for selective adsorption of uranium(VI).
RSC Advances, 5, (83), 67662-67668, (2015)
   

Meng H et al., Preparation and characterization of surface imprinted polymer for selective sorption of uranium(VI).
Journal of Radioanalytical and Nuclear Chemistry, 306, (1), 139-146, (2015)
   

Ma G

Li G et al., Recent applications of solid-phase extraction techniques for analysis of trace residues and contaminants in food.
Chinese Journal of Chromatography, 29, (7), 606-612, (2011)
   

Ma GF

Ma GF et al., Development of magnetic molecularly imprinted polymers based on carbon nanotubes - Application for trace analysis of pyrethroids in fruit matrices.
Journal of Chromatography A, 1329, 1-9, (2014)
   

Ma GF et al., Determination of Chlorpyrifos in Rice Based on Magnetic Molecularly Imprinted Polymers Coupled with High-Performance Liquid Chromatography.
Food Analytical Methods, 7, (2), 377-388, (2014)
   

Ma GH

Zhang CL et al., Synthesis of molecularly imprinted polymer for Rifampicin and its adsorption.
The Chinese Journal of Process Engineering, 9, (3), 608-612, (2009)
   

Zhou YM et al., Molecular imprinting-flow injection chemiluminescence method for determination of doxycycline hydrochloride.
Spectroscopy and Spectral Analysis, 29, (7), 1745-1749, (2009)
   

Geng LY et al., Synthesis and evaluation of molecularly imprinted polymer microspheres for Erythromycin Ethylsuccinate.
Ion Exchange and Adsorption, 27, (6), 495-501, (2011)
   

Kou X et al., Preparation of molecularly imprinted nanoparticles for erythromycin and their adsorption characteristics.
The Chinese Journal of Process Engineering, 11, (3), 481-486, (2011)
   

Geng LY et al., Preparation, characterization and adsorption performance of molecularly imprinted microspheres for erythromycin using suspension polymerization.
Journal of Chemical Technology & Biotechnology, 87, (5), 635-642, (2012)
   

Kou X et al., Synthesis, Characterization and Adsorption Behavior of Molecularly Imprinted Nanospheres for Erythromycin Using Precipitation Polymerization.
Journal of Nanoscience and Nanotechnology, 12, (9), 7388-7394, (2012)
   

Kou X et al., Preparation of molecularly imprinted nanospheres by premix membrane emulsification technique.
Journal of Membrane Science, 417-418, 87-95, (2012)
   

Yun YB et al., Synthesis and Adsorption Performance of Molecularly Imprinted Microspheres for Quercetin by Suspension Polymerization.
Pharmaceutica Analytica Acta, 3, (3), Art.No. 151-(2012)
   

Duan DD et al., Three-dimensional molecularly imprinted electrochemical sensor based on Au NPs@Ti-based metal-organic frameworks for ultra-trace detection of bovine serum albumin.
Electrochimica Acta, 261, 160-166, (2018)
   

Duan DD et al., A three-dimensional conductive molecularly imprinted electrochemical sensor based on MOF derived porous carbon/carbon nanotubes composites and prussian blue nanocubes mediated amplification for chiral analysis of cysteine enantiomers.
Electrochimica Acta, 302, 137-144, (2019)
   

Duan DD et al., A novel molecularly imprinted electrochemical sensor based on double sensitization by MOF/CNTs and Prussian blue for detection of 17[beta]-estradiol.
Bioelectrochemistry, 129, 211-217, (2019)
   

Ma GP

Xu F et al., Immunoassay of chemical contaminants in milk: A review.
Journal of Integrative Agriculture, 14, (11), 2282-2295, (2015)
   

Ma GY

Zhao Y et al., Adsorption Separation of Carbon Dioxide from Flue Gas by a Molecularly Imprinted Adsorbent.
Environmental Science & Technology, 48, (3), 1601-1608, (2014)
   

Ma H

Liu YX et al., Quantum-dots-encoded-microbeads based molecularly imprinted polymer.
Biosensors and Bioelectronics, 77, 886-893, (2016)
   

Ma HH

Jin GP et al., Extremely sensitive electrode for melamine using a kind of molecularly imprinted nano-porous film.
Microchimica Acta, 174, (3), 265-271, (2011)
   

Ma HJ

Ao JX et al., A novel ion-imprinted amidoxime-functionalized UHMWPE fiber based on radiation-induced crosslinking for selective adsorption of uranium.
RSC Advances, 9, (49), 28588-28597, (2019)
   

Ma HL

Muralidharan S et al., Organized molecular self-assemblies for metal ion recognition.
Abstracts of Papers of the American Chemical Society, 222, U373-U374, (2001)
   

Duan YQ et al., Optimization of the process parameters of synthesis of oligomeric procyanidins imprinted polymer.
Scientific Research and Essays, 5, (19), 2953-2964, (2010)
   

Ma HL et al., Preparation of Nicotinamide Molecularly Imprinted Polymer Microspheres via Precipitation Polymerization.
Chemical Industry Times, 24, (12), 18-20, (2010)
   

Xu FF et al., Advance in surface molecularly imprinted carriers.
Chemical Industry and Engineering Progress, 30, (5), 1033-1038, 1134, (2011)
   

Xu FF et al., Preparation and Adsorption Property of (-)-Epigallocatechin Gallate Surface Molecularly Imprinted Polymer.
The Chinese Journal of Process Engineering, 11, (4), 706-710, (2011)
   

Duan YQ et al., A computational approach to design an electrochemical sensor and determination of acephate in aqueous solution based on a molecularly imprinted poly(o-phenylenediamine) film.
Analytical Methods, 5, (22), 6449-6456, (2013)
   

Zhang HH et al., Molecularly Imprinted Membrane Possessing Selectivity and Adsorption Behaviour to Targeted (-)-Epigallocatechin-3-gallate Molecule.
Asian Journal of Chemistry, 25, (7), 3711-3718, (2013)
   

Ma HM

Liu ZY et al., Electrochemical assay of ampicillin using Fe3N-Co2N nanoarray coated with molecularly imprinted polymer.
Microchimica Acta, 187, (8), Article442-(2020)
   

Liu ZY et al., Novel ratiometric electrochemical sensor for no-wash detection of fluorene-9-bisphenol based on combining CoN nanoarrays with molecularly imprinted polymers.
Analyst, 145, (9), 3320-3328, (2020)
   

Ma HP

Huang CN et al., Determination of Methomyl in Vegetables by Magnetic Molecularly Imprinted Polymer Extraction/High Performance Liquid Chromatography.
Journal of Instrumental Analysis, 32, (3), 275-280, (2013)
   

Ma HT

Cheng WJ et al., Hierarchically imprinted mesoporous silica polymer: An efficient solid-phase extractant for bisphenol A.
Talanta, 120, 255-261, (2014)
   

Wan YC et al., Book chapter, MIPs in Aqueous Environments, 
In: Molecularly Imprinted Polymers in Biotechnology, Mattiasson B, Ye L (Eds.) Springer: Berlin, Heidelberg, Ch. 6, 131-166, (2015)
   

Wan YC et al., Rapid determination of neomycin in biological samples using fluorescent sensor based on quantum dots with doubly selective binding sites.
Journal of Pharmaceutical and Biomedical Analysis, 154, 75-84, (2018)
   

Qi JF et al., A novel acetylcholinesterase biosensor with dual-recognized strategy based on molecularly imprinted polymer.
Sensors and Actuators B: Chemical, 337, Article129760-(2021)
   

Ma HW

Niu J et al., Surface-Imprinted Nanostructured Layer-by-Layer Film for Molecular Recognition of Theophylline Derivatives.
Langmuir, 24, (20), 11988-11994, (2008)
   

Ma J

Ren YM et al., Characters of Cu (II) ion imprinted magnetic composite adsorbent.
Material Science and Technology, 17, (6), 801-805, (2009)
   

Ren YM et al., Characters of Cu(II) ion imprinted magnetic composite adsorbent.
Materials Science and Technology, 17, (6), 801-805, (2009)
   

Ren YM et al., Preparation of Cu (II) ion imprinted magnetic composite adsorbent.
Material Science and Technology, 17, (5), 680-685, (2009)
   

Ren YM et al., Preparation of Cu (II) ion imprinted magnetic composite adsorbent.
Materials Science and Technology, 17, (5), 680-685, (2009)
   

Yang M et al., Differential pulse voltammetric determination of trace rotenone using molecularly imprinted polymer microspheres.
Microchimica Acta, 166, (1), 95-99, (2009)
   

Ma J et al., Study on the preparation of Gatifloxacin imprinted polymers and its binding properties.
Chemistry Bulletin, 73, (5), 455-460, (2010)
   

Ma J et al., The study of core-shell molecularly imprinted polymers of 17[beta]-estradiol on the surface of silica nanoparticles.
Biosensors and Bioelectronics, 26, (5), 2791-2795, (2011)
   

Yang M et al., Determination of trace rotenone by UV-Vis spectrophotometry using molecularly imprinted polymer microspheres.
Journal of Analytical Chemistry, 66, (9), 820-823, (2011)
   

Ren YM et al., Synthesis and properties of bisphenol A molecular imprinted particle for selective recognition of BPA from water.
Journal of Colloid and Interface Science, 367, (1), 355-361, (2012)
   

Yuan LH et al., Preparation of estriol-molecularly imprinted silica nanoparticles for determining oestrogens in milk tablets.
Food Chemistry, 131, (3), 1063-1068, (2012)
   

Ma J et al., Preparation of a Kind of Magnetic Molecularly Imprinted Polymer toward Sudan I and Its Application in Separation of Sudan I.
Journal of Instrumental Analysis, 32, (6), 726-731, (2013)
   

Ren YM et al., Selective recognition of molybdenum(VI) from water by Mo(VI) oxy ion-imprinted particle as an adsorbent.
Chemical Engineering Journal, 219, 286-294, (2013)
   

Ren YM et al., The selective binding character of a molecular imprinted particle for Bisphenol A from water.
Water Research, 50, 90-100, (2014)
   

Lan F et al., Superparamagnetic nanocomposites based on surface imprinting for biomacromolecular recognition.
Materials Science and Engineering: C, 70, (Part 2), 1076-1080, (2017)
   

Liu PX et al., Selective recognition mechanism of molybdenum(VI) ions binding onto ion-imprinted particle in the water.
Chemical Engineering Journal, 349, 176-183, (2018)
   

Zheng LF et al., Fabrication of a highly sensitive electrochemical sensor based on electropolymerized molecularly imprinted polymer hybrid nanocomposites for the determination of 4-nonylphenol in packaged milk samples.
Analytical Biochemistry, 559, 44-50, (2018)
   

Liu PX et al., Two different states conversion mechanism of the imprinting sites.
Journal of Colloid and Interface Science, 539, 235-244, (2019)
   

Yan MM et al., A molecularly imprinted polymer with integrated gold nanoparticles for surface enhanced Raman scattering based detection of the triazine herbicides, prometryn and simetryn.
Microchimica Acta, 186, (3), Article143-(2019)
   

Zhang C et al., A disposable electrochemical sensor based on electrospinning of molecularly imprinted nanohybrid films for highly sensitive determination of the organotin acaricide cyhexatin.
Microchimica Acta, 186, (8), Article504-(2019)
   

Zhao MJ et al., Preparation of core-shell magnetic molecularly imprinted polymers for extraction of patulin from juice samples.
Journal of Chromatography A, 1615, Article460751-(2020)
   

Ma J et al., An overview on molecular imprinted polymers combined with surface-enhanced Raman spectroscopy chemical sensors toward analytical applications.
Talanta, 225, Article122031-(2021)
   

Ma JB

Peng Y et al., Polymer sorbents used for solid phase extraction.
Polymer Materials Science and Engineering, 23, (4), 1-5, (2007)
   

Ma JB et al., Fast determination of catecholamines in human plasma using carboxyl-functionalized magnetic-carbon nanotube molecularly imprinted polymer followed by liquid chromatography-tandem quadrupole mass spectrometry.
Journal of Chromatography A, 1429, 86-96, (2016)
   

Ma JF

Kong Y et al., A novel voltammetric sensor for ascorbic acid based on molecularly imprinted poly(o-phenylenediamine-co-o-aminophenol).
Analytica Chimica Acta, 809, 54-60, (2014)
   

Wang TT et al., Analysis of melamine and analogs in complex matrices: Advances and trends.
Journal of Separation Science, 40, (1), 170-182, (2017)
   

Zhang J et al., Multi-templates based molecularly imprinted sodium alginate/MnO2 for simultaneous enantiorecognition of lysine, alanine and cysteine isomers.
International Journal of Biological Macromolecules, 129, 786-791, (2019)
   

Ma JG

Zhang YZ et al., Specific enrichment of caffeic acid from Taraxacum mon-golicum Hand.-Mazz. by pH and magnetic dual-responsive molecularly imprinted polymers.
Analytica Chimica Acta, 1096, 193-202, (2020)
   

Ma JJ

Ma JJ et al., Application of Molecularly Imprinted Polymers in Separation of Chiral Drugs and Determination of Medicines.
Chemical Industry Times, 18, (1), 5-8, (2004)
   

Ma JJ et al., Progress in the Study on Electrochemical Sensor with Molecularly Imprinted Polymers as Sensitive Material.
Electronic Components & Materials, 23, (10), 48-51, (2004)
   

Ma JJ et al., Study on the Synthesis and Properties of S -Naproxen Molecularly Imprinted Polymers Using N-vinylpyrrolidone as a Functional Monomer.
Journal of Functional Polymers, 18, (1), 144-148, (2005)
   

Ma JJ et al., Performance of S-Naproxen Molecularly Imprinted Polymers Prepared by Different Functional Monomers.
Fine Chemicals, 24, (2), 133-135, 153, (2007)
   

Yang KG et al., Preparation and selective binding characterization of Bisphenol A imprinted polyethersulfone particles.
Journal of Applied Polymer Science, 106, (4), 2791-2799, (2007)
   

Yang KG et al., Molecularly imprinted porous polysulfone particles for the binding and recognition of bisphenol A.
Desalination, 245, (1-3), 232-245, (2009)
   

Zhu YY et al., Fluorescence detection of d-aspartic acid based on thiol-ene cross-linked molecularly imprinted optical fiber probe.
Sensors and Actuators B: Chemical, 305, Article127323-(2020)
   

Ma JK

Zhang YL et al., Molecularly imprinted photonic crystals for the direct label-free distinguishing of l-proline and d-proline.
Physical Chemistry Chemical Physics, 15, (40), 17250-17256, (2013)
   

Wei SL et al., Development of magnetic molecularly imprinted polymers with double templates for the rapid and selective determination of amphenicol antibiotics in water, blood, and egg samples.
Journal of Chromatography A, 1473, 19-27, (2016)
   

Ma JK et al., Preparation and application of chlorpyrifos molecularly imprinted solid-phase microextraction probes for the residual determination of organophosphorous pesticides in fresh and dry foods.
Journal of Separation Science, 41, (15), 3152-3162, (2018)
   

Wei SL et al., Preparation and application of a magnetic plasticizer as a molecularly imprinted polymer adsorbing material for the determination of phthalic acid esters in aqueous samples.
Journal of Separation Science, 41, (19), 3806-3814, (2018)
   

Ma JK et al., Rapid determination of antiviral medication ribavirin in different feedstuffs using a novel magnetic molecularly imprinted polymer coupled with high-performance liquid chromatography.
Journal of Separation Science, 42, (21), 3372-3381, (2019)
   

Huang XC et al., Preparation and application of a novel magnetic molecularly imprinted polymer for simultaneous and rapid determination of three trace endocrine disrupting chemicals in lake water and milk samples.
Analytical and Bioanalytical Chemistry, 412, (8), 1835-1846, (2020)
   

Ma JK et al., A novel enrichment and sensitive method for simultaneous determination of 15 phthalate esters in milk powder samples.
LWT, 153, Article112426-(2022)
   

Ma JL

Zhao S et al., Preparation of microcystins molecularly imprinted polymer by swelling polymerization.
Chemical Industry and Engineering Progress, 29, (S2), 255-262, (2010)
   

Ma JP

Xu SF et al., Preparation of hollow porous molecularly imprinted polymers and their applications to solid-phase extraction of triazines in soil samples.
Journal of Materials Chemistry, 21, (32), 12047-12053, (2011)
   

Song XL et al., Determination of 16 polycyclic aromatic hydrocarbons in seawater using molecularly imprinted solid-phase extraction coupled with gas chromatography-mass spectrometry.
Talanta, 99, 75-82, (2012)
   

Wen YY et al., Recent advances in enrichment techniques for trace analysis in capillary electrophoresis.
Electrophoresis, 33, (19-20), 2933-2952, (2012)
   

Zhang Z et al., Hg2+ ion-imprinted polymers sorbents based on dithizone-Hg2+ chelation for mercury speciation analysis in environmental and biological samples.
RSC Advances, 4, (87), 46444-46453, (2014)
   

Arabi M et al., Hydrophilic molecularly imprinted nanospheres for the extraction of rhodamine B followed by HPLC analysis: A green approach and hazardous waste elimination.
Talanta, 215, Article120933-(2020)
   

Song ZH et al., Chromatographic performance of zidovudine imprinted polymers coated silica stationary phases.
Talanta, 239, Article123115-(2022)
   

Ma JQ

Han YT et al., Preparation of lysozyme based molecularly imprinted polymers and its chromatographic evaluation.
Journal of Shaanxi Normal University (Natural Science Edition), 40, (4), 46-50, (2012)
   

Zhang J et al., Preparation and characterization of molecularly imprinted polymer of bovine serum albumin.
Journal of Applied Polymer Science, 124, (1), 723-728, (2012)
   

Zhang J et al., Preparation of Ofloxacin Poly(Glycidyl Methacrylate-Co-Ethylenedimethacrylate) (PGMA/EDMA) Molecularly Imprinted Microspheres and Their Application to the Analysis of Quinolones in Milk.
Food Analytical Methods, 7, (3), 721-729, (2014)
   

Zhang J et al., Selective solid-phase extraction of artificial chemicals from milk samples using multiple-template surface molecularly imprinted polymers.
Biomedical Chromatography, 29, (8), 1267-1273, (2015)
   

Ma JQ et al., Preparation of molecularly imprinted hybrid mesoporous silica materials for determination of fluoroquinolone veterinary drug residues in codfish by solid-phase extraction-high performance liquid chromatography.
Journal of Food Safety and Quality, 9, (3), 540-546, (2018)
   

Ma JX

Ma JX et al., Application of novel quantum dot-based molecularly imprinted fluorescence sensor in rapid detection.
Chinese Journal of Chromatography, 39, (8), 775-780, (2021)
   

Ma JY

Ma JY et al., Synthesis of diethylstilbestrol-based molecularly imprinted polymers and its application in residues analysis.
Chinese Journal of Analytical Chemistry, 33, (10), 1413-1416, (2005)
   

Liang HL et al., Synthesis and characterization of a new ion-imprinted polymer for the selective separation of thorium(IV) ions at high acidity.
RSC Advances, 7, (56), 35394-35402, (2017)
   

Ma KF

Chen LN et al., Application of Molecular Imprinting Technology for Separation of Puerarin and Effect of Solvent on Recognition of Molecularly Imprinted Polymer.
Chemistry and Industry of Forest Products, 28, (3), 18-22, (2008)
   

Wang S et al., Self-assembly molecularly imprinted polymers of 17[beta]-estradiol on the surface of magnetic nanoparticles for selective separation and detection of estrogenic hormones in feeds.
Journal of Chromatography B, 879, (25), 2595-2600, (2011)
   

Yuan LH et al., Preparation of estriol-molecularly imprinted silica nanoparticles for determining oestrogens in milk tablets.
Food Chemistry, 131, (3), 1063-1068, (2012)
   

Ma L

Zhang J et al., Advances in affinity chromatography.
Chinese Journal of Chromatography, 17, (3), 253-256, (1999)
   

Yang LB et al., Ultrasensitive SERS Detection of TNT by Imprinting Molecular Recognition Using a New Type of Stable Substrate.
Chemistry - A European Journal, 16, (42), 12683-12693, (2010)
   

Zhu CY et al., Molecular Imprinted Polysulfone Membranes for the Sieving, Binding, and Recognition of Bisphenol A.
International Journal of Polymeric Materials, 62, (1), 17-22, (2013)
   

Dai FF et al., Fabrication and Application of Electropolymerized Molecularly Imprinted Film for 3-Phenoxybenzoic Acid Detection.
Food Science, 36, (20), 232-238, (2015)
   

Li XY et al., Preparation of metallic pivot-based imprinted monoliths with a hydrophilic macromonomer.
RSC Advances, 5, (46), 36753-36761, (2015)
   

Ma L et al., Water-compatible molecularly imprinted polymers prepared using metal-organic gel as porogen.
RSC Advances, 5, (103), 84601-84609, (2015)
   

Gao J et al., Lipase Immobilization through the Combination of Bioimprinting and Cross-Linked Protein-Coated Microcrystal Technology for Biodiesel Production.
Industrial & Engineering Chemistry Research, 55, (42), 11037-11043, (2016)
   

Ma L et al., Preparation of Molecularly Imprinted Membrane for Type II-pyrethroid Determination Based on Electrochemical Technique.
Modern Food Science and Technology, 32, (2), 121-129, (2016)
   

Xu SN et al., Fluorometric determination of quercetin by using graphitic carbon nitride nanoparticles modified with a molecularly imprinted polymer.
Microchimica Acta, 185, (10), 492-(2018)
   

Ao JX et al., A novel ion-imprinted amidoxime-functionalized UHMWPE fiber based on radiation-induced crosslinking for selective adsorption of uranium.
RSC Advances, 9, (49), 28588-28597, (2019)
   

Fan CN et al., Molecular imprinting on PtPd nanoflowers for selective recognition and determination of hydrogen peroxide and glucose.
RSC Advances, 9, (58), 33678-33683, (2019)
   

Han S et al., A molecularly imprinted composite based on graphene oxide for targeted drug delivery to tumor cells.
Journal of Materials Science, 54, (4), 3331-3341, (2019)
   

Yin R et al., Extraction of matrine from soil with matrix solid-phase dispersion by molecularly imprinted polymers derived from lignin-based Pickering emulsions.
Journal of Separation Science, 42, (23), 3563-3570, (2019)
   

Zhao L et al., Improving affinity of [beta]-cyclodextrin-based molecularly imprinted polymer using room temperature ionic liquid.
European Polymer Journal, 116, 275-282, (2019)
   

Guo T et al., A multifunctional near-infrared fluorescent sensing material based on core-shell upconversion nanoparticles@magnetic nanoparticles and molecularly imprinted polymers for detection of deltamethrin.
Microchimica Acta, 188, (5), Article165-(2021)
   

Ma LC

Ma LC et al., Characterization and properties of Cu2+ ion-imprinted magnetic chitosan beads and their Cu2+ adsorption performance.
Journal of Chemical Engineering of Chinese Universities, 30, (1), 174-181, (2016)
   

Ma LC et al., Synthesis of Cu2+ ion-imprinted magnetic chitosan beads for selective recognition of Cu2+ ion in aqueous solution.
Chinese Journal of Rare Metals, 40, (6), 606-612, (2016)
   

Ma LG

Zhu HP et al., Preparation of a molecularly imprinted polymer using TMB as a dummy template and its application as SPE sorbent for determination of six PBBs in water and fish samples.
Analytical Methods, 3, (2), 393-399, (2011)
   

Ma LH

Zhang ZP et al., Polydopamine molecularly imprinted polymer coated on a biomimetic iron-based metal-organic framework for highly selective fluorescence detection of metronidazole.
Talanta, 232, Article122411-(2021)
   

Ma LJ

Liu YX et al., Layer-by-Layer Surface Molecular Imprinting on Polyacrylonitrile Nanofiber Mats.
The Journal of Physical Chemistry A, 119, (25), 6661-6667, (2015)
   

Ma LL

Meng MJ et al., Selective Adsorption of Methylparaben by Submicrosized Molecularly Imprinted Polymer: Batch and Dynamic Flow Mode Studies.
Industrial & Engineering Chemistry Research, 51, (45), 14915-14924, (2012)
   

Ma LP

Liu ZM et al., Supramolecular imprinted polymeric stir bar sorptive extraction followed by high-performance liquid chromatography for endocrine disruptor compounds analysis.
Microchemical Journal, 158, Article105163-(2020)
   

Ma LY

Jiang JG et al., Molecular Recognition Characteristics of Zinc(II)-complex Molecularly Imprinted Polymer.
Journal of Instrumental Analysis, 22, (5), 37-40, (2003)
   

Wang HY et al., Syntheses of molecularly imprinted polymers and their molecular recognition study for doxazosin mesylate.
Reactive and Functional Polymers, 64, (2), 119-126, (2005)
   

Wang HY et al., Syntheses of molecularly imprinted polymers and their molecular recognition study for benzotriazole.
Reactive and Functional Polymers, 66, (10), 1081-1086, (2006)
   

Feng SL et al., Development of molecularly imprinted polymers-surface-enhanced Raman spectroscopy/colorimetric dual sensor for determination of chlorpyrifos in apple juice.
Sensors and Actuators B: Chemical, 241, 750-757, (2017)
   

Ma LY et al., Development of Molecularly Imprinted Polymers To Block Quorum Sensing and Inhibit Bacterial Biofilm Formation.
ACS Applied Materials & Interfaces, 10, (22), 18450-18457, (2018)
   

Ma M

Li CY et al., Preparation of parathion imprinted polymer beads and its applications in electrochemical sensing.
Colloids and Surfaces B: Biointerfaces, 90, (1), 152-158, (2012)
   

Ma M et al., A disposable molecularly imprinted electrochemical sensor based on screen-printed electrode modified with ordered mesoporous carbon and gold nanoparticles for determination of ractopamine.
Journal of Electroanalytical Chemistry, 775, 171-178, (2016)
   

Ma MF

Chen CC et al., Molecularly Imprinted Polymer as an Antibody Substitution in Pseudo-immunoassays for Chemical Contaminants in Food and Environmental Samples.
Journal of Agricultural and Food Chemistry, 66, (11), 2561-2571, (2018)
   

Ma MH

Niu YL et al., Synthesis of chlorogenic acid imprinted chromatographic packing by surface-initiated atom transfer radical polymerization and its application.
Chemical Research in Chinese Universities, 30, (5), 855-862, (2014)
   

Gong YR et al., Preparation of 17[beta]-estradiol-imprinted material by surface-initiated atom transfer radical polymerization and its application.
Journal of Separation Science, 38, (7), 1254-1261, (2015)
   

Qi YX et al., Preparation and applications of 4-methyl imidazole magnetic surface molecularly imprinted polymers.
Chinese Journal of Chromatography, 33, (12), 1234-1241, (2015)
   

Ma MH et al., Electrochemical Sensor Based on Molecularly Imprinted Polypyrrole Film for Detection of S-ovalbumin.
Modern Food Science and Technology, 32, (12), 329-336, (2016)
   

Niu YL et al., Preparation of Tetracycline Surface Molecularly Imprinted Material for the Selective Recognition of Tetracycline in Milk.
Food Analytical Methods, 9, (8), 2342-2351, (2016)
   

Zeng Q et al., A Molecularly Imprinted Electrochemical Sensor Based on Polypyrrole/Carbon Nanotubes Composite for the Detection of S-ovalbumin in Egg White.
International Journal of Electrochemical Science, 12, 3965-3981, (2017)
   

Zhou YQ et al., Preparation of Imazethapyr Surface Molecularly Imprinted Polymers for Its Selective Recognition of Imazethapyr in Soil Samples.
Journal of Analytical Methods in Chemistry, 2018, ArticleID7535417-(2018)
   

Ma MJ

Zhang CJ et al., Facile synthesis of magnetically recoverable Fe3O4/Al2O3/molecularly imprinted TiO2 nanocomposites and its molecular recognitive photocatalytic degradation of target contaminant.
Journal of Molecular Catalysis A: Chemical, 402, 10-16, (2015)
   

Ma MM

Ma MM et al., Preparation and Application of Molecular Imprinting Polymer Based Zero Current Potential Sensor for Benzidine.
Chinese Journal of Analytical Chemistry, 43, (7), 1021-1026, (2015)
   

Ma MM et al., Interfacial potentiometry with double poles sensor based on molecularly imprinted polymer for monitoring of 4-aminoazobenzene.
International Journal of Environmental Analytical Chemistry, 97, (3), 289-300, (2017)
   

Ma MX

Li J et al., Synthesis of a molecularly imprinted polymer using MOF-74(Ni) as matrix for selective recognition of lysozyme.
Analytical and Bioanalytical Chemistry, 412, (26), 7227-7236, (2020)
   

Ma MY

Zhang LX et al., Preparation of dummy template molecularly imprinted polymers on multi-walled carbon nanotubes as a solid-phase extraction for determination of three fluoroquinolones in milk samples.
Chinese Journal of Analysis Laboratory, 37, (5), 574-578, (2018)
   

Ma N

Wang H et al., Determination of penicillin residues in milk by molecular imprinting technology.
China Dairy Industry, 36, (6), 58-61, (2008)
   

Zhang JK et al., Synthesis of Molecularly Imprinted Polymer for Sensitive Penicillin Determination in Milk.
Analytical Letters, 41, (18), 3411-3419, (2008)
   

Ma N et al., Determination of Tetracyclines in Chicken by Dispersive Solid Phase Microextraction Based on Metal-Organic Frameworks/Molecularly Imprinted Nano-polymer and Ultra Performance Liquid Chromatography.
Food Analytical Methods, 13, (5), 1211-1219, (2020)
   

Ma P

Ma P et al., A biomimetic Setaria viridis-inspired imprinted nanoadsorbent: green synthesis and application to the highly selective and fast removal of sulfamethazine.
RSC Advances, 6, (12), 9619-9630, (2016)
   

Ma PF

Xiao SS et al., Preparation of molecularly imprinted polymers via atom transfer radical polymerization and its characteristics.
Journal of Functional Materials, 44, (24), 3611-3615+3621, (2013)
   

Yang WM et al., Rational design and preparation for novel denitrogenation adsorbents by computational simulation and improved atom transfer radical polymerization.
New Journal of Chemistry, 37, (9), 2758-2767, (2013)
   

Liu LK et al., Rational design and preparation of magnetic imprinted polymers for removal of indole by molecular simulation and improved atom transfer radical polymerization.
RSC Advances, 4, (2), 605-616, (2014)
   

Ma PF et al., Preparation and application of sulfadiazine surface molecularly imprinted polymers with temperature-responsive properties.
Journal of Applied Polymer Science, 132, (15), Article No 41769-(2015)
   

Ma PF et al., Preparation of Surface Molecularly Imprinted Polymers for Selective Removal and Determination of Sulphamethoxazole from Aqueous Media.
Adsorption Science & Technology, 33, (1), 45-62, (2015)
   

Ma PF et al., Surface imprinted polymers for oil denitrification with the combination of computational simulation and multi-template molecular imprinting.
Polymers for Advanced Technologies, 26, (5), 476-486, (2015)
   

Yang WM et al., Optimal design of an imprinted preassembled system by quantum chemical calculations and preparation of a surface-imprinted material for the selective removal of quinoline.
Journal of Applied Polymer Science, 132, (15), Article No 41730-(2015)
   

Ma PL

Zhou JF et al., Preparation, evaluation and application of molecularly imprinted solid-phase microextraction monolith for selective extraction of pirimicarb in tomato and pear.
Journal of Chromatography A, 1217, (48), 7478-7483, (2010)
   

Ma PP

Qian T et al., Ultrasensitive dopamine sensor based on novel molecularly imprinted polypyrrole coated carbon nanotubes.
Biosensors and Bioelectronics, 58, 237-241, (2014)
   

Ma PX

Rambhia KJ et al., Controlled drug release for tissue engineering.
Journal of Controlled Release, 219, 119-128, (2015)
   

Ma Q

Luo J et al., Synthesis of Water-Dispersible Molecularly Imprinted Electroactive Nanoparticles for the Sensitive and Selective Paracetamol Detection.
ACS Applied Materials & Interfaces, 8, (32), 21028-21038, (2016)
   

Chen SF et al., Electrochemiluminescence Detection of Escherichia coli O157:H7 Based on a Novel Polydopamine Surface Imprinted Polymer Biosensor.
ACS Applied Materials & Interfaces, 9, (6), 5430-5436, (2017)
   

Deng HY et al., Preparation and Selective Recognition Property of Magnetic Surface Molecularly Imprinted Polymers with Gallic Acid as Template.
Chinese Journal of Applied Chemistry, 35, (5), 600-608, (2018)
   

Gui WY et al., Ratiometric fluorescent sensor with molecularly imprinted mesoporous microspheres for malachite green detection.
Sensors and Actuators B: Chemical, 266, 685-691, (2018)
   

Liu Y et al., Nitrogen-doped graphene quantum dots-based fluorescence molecularly imprinted sensor for thiacloprid detection.
Talanta, 183, 339-344, (2018)
   

Tan K et al., Water-dispersible molecularly imprinted nanohybrids via co-assembly of carbon nanotubes with amphiphilic copolymer and photocrosslinking for highly sensitive and selective paracetamol detection.
Biosensors and Bioelectronics, 117, 713-719, (2018)
   

Wang B et al., Magnetic surface molecularly imprinted polymeric microspheres using gallic acid as a segment template for excellent recognition of ester catechins.
Analytical Methods, 10, (27), 3317-3324, (2018)
   

Nie YX et al., Nitrogen-rich quantum dots-based fluorescence molecularly imprinted paper strip for p-nitroaniline detection.
Microchemical Journal, 148, 162-168, (2019)
   

Ma QL

Zhu ZB et al., Determination of bergenin in ardisia japonica by molecularly imprinted-matrix solid phase dispersion extraction.
Chinese Journal of Analysis Laboratory, 32, (11), 108-111, (2013)
   

Ma R

Ma R et al., Preparation and optimization of diatom-based cadmium ion-imprinted materials.
Journal of Molecular Structure, 1251, Article132044-(2022)
   

Zhang H et al., Study of ion-imprinted adsorbent materials on diatom-based Cr(VI) Surfaces.
Materials Letters, 308, Article131149-(2022)
   

Ma RR

Wang SX et al., Specific adsorption of tetracycline from milk by using biocompatible magnetic molecular imprinting material and evaluation by ECD.
Food Chemistry, 326, Article126969-(2020)
   

He JY et al., Synergistic recognition of transferrin by using performance dual epitope imprinted polymers.
Analytica Chimica Acta, 1186, Article339117-(2021)
   

Tan L et al., Specific adsorption and determination of aspartame in soft drinks with a zein magnetic molecularly imprinted modified MGCE sensor.
RSC Advances, 11, (22), 13486-13496, (2021)
   

Tan L et al., Investigating two distinct dummy templates molecularly imprinted polymers as paclitaxel adsorbent in synthesis system and releaser in biological samples.
Microchemical Journal, 165, Article106042-(2021)
   

Ma RT

Ma RT et al., Magnetic molecularly imprinted polymer for the selective extraction of quercetagetin from Calendula officinalis extract.
Talanta, 134, 650-656, (2015)
   

Ma RT et al., Highly dispersed magnetic molecularly imprinted nanoparticles with well-defined thin film for the selective extraction of glycoprotein.
Journal of Materials Chemistry B, 4, (15), 2620-2627, (2016)
   

Ma RT et al., Improved surface imprinting based on a simplified mass-transfer process for the selective extraction of IgG.
Journal of Materials Chemistry B, 5, (36), 7512-7518, (2017)
   

Sun XY et al., Erratum to: Boronate-affinity based magnetic molecularly imprinted nanoparticles for the efficient extraction of the model glycoprotein horseradish peroxidase.
Microchimica Acta, 184, (9), 3637-3637, (2017)
   

Sun XY et al., Boronate-affinity based magnetic molecularly imprinted nanoparticles for the efficient extraction of the model glycoprotein horseradish peroxidase.
Microchimica Acta, 184, (10), 3729-3737, (2017)
   

Sun XY et al., Magnetic boronate modified molecularly imprinted polymers on magnetite microspheres modified with porous TiO2 (Fe3O4@pTiO2@MIP) with enhanced adsorption capacity for glycoproteins and with wide operational pH range.
Microchimica Acta, 185, (12), Article565-(2018)
   

Sun XY et al., Synthesis of magnetic molecularly imprinted nanoparticles with multiple recognition sites for the simultaneous and selective capture of two glycoproteins.
Journal of Materials Chemistry B, 6, (4), 688-696, (2018)
   

Ma RT et al., A fluorescent molecularly imprinted device for the on-line analysis of AFP in human serum.
Journal of Materials Chemistry B, 7, (40), 6187-6194, (2019)
   

Ma SH

Lan F et al., Polydopamine-based superparamagnetic molecularly imprinted polymer nanospheres for efficient protein recognition.
Colloids and Surfaces B: Biointerfaces, 123, 213-218, (2014)
   

Lan F et al., Superparamagnetic nanocomposites based on surface imprinting for biomacromolecular recognition.
Materials Science and Engineering: C, 70, (Part 2), 1076-1080, (2017)
   

Ma SJ

Dong XC et al., Molecularly imprinted solid-phase extraction of (-)-ephedrine from Chinese Ephedra.
Journal of Chromatography A, 1070, (1-2), 125-130, (2005)
   

Ma SJ et al., New Progress in Molecular Imprinting Technique.
Journal of Shanxi Normal University (Natural Science Edition), 20, (2), 59-63, (2006)
   

Ma SJ et al., Preparation and Characterization of Trans-Resveratrol Imprinted Polymers.
Analytical Letters, 40, (2), 321-333, (2007)
   

Zhuang XL et al., Selective on-line extraction of trans-resveratrol and emodin from Polygonum cuspidatum using molecularly imprinted polymer.
Journal of Chromatographic Science, 46, (8), 739-742, (2008)
   

Huang C et al., Recent application of molecular imprinting technique in food safety.
Journal of Chromatography A, 1657, Article462579-(2021)
   

Jia SC et al., Highly selective enrichment and direct determination of imazethapyr residues from milk using magnetic solid-phase extraction based on restricted-access molecularly imprinted polymers.
Analytical Methods, 13, (3), 426-435, (2021)
   

Ma T

Liu XY et al., Novel hybrid probe based on double recognition of aptamer-molecularly imprinted polymer grafted on upconversion nanoparticles for enrofloxacin sensing.
Biosensors and Bioelectronics, 87, 203-208, (2017)
   

Tang YW et al., Ultrasensitive detection of clenbuterol by a covalent imprinted polymer as a biomimetic antibody.
Food Chemistry, 228, 62-69, (2017)
   

Tang YW et al., Upconversion Nanoparticles Capped with Molecularly Imprinted Polymer as Fluorescence Probe for the Determination of Ractopamine in Water and Pork.
Food Analytical Methods, (2017)
   

Tang YW et al., A NIR-responsive up-conversion nanoparticle probe of the NaYF4:Er, Yb type and coated with a molecularly imprinted polymer for fluorometric determination of enrofloxacin.
Microchimica Acta, 184, (9), 3469-3475, (2017)
   

Tang YW et al., Visual flow-through column biomimetic immunoassay using molecularly imprinted polymer as artificial antibody for rapid detection of clenbuterol in water sample.
Food and Agricultural Immunology, 28, (6), 949-957, (2017)
   

Ma TJ

Ma TJ et al., Applications of Molecular Imprinting Technique in the Detection of Pesticides.
Academic Periodical of Farm Products Processing, (9), 29-32, 35, (2009)
   

Ma TS

Zhang CL et al., Study and Application of Molecular Imprinting Technique in Pharmaceutical Analysis.
Journal of Taishan University, 30, (6), 60-64, (2008)
   

Zhang CL et al., Synthesis of molecularly imprinted polymer for Rifampicin and its adsorption.
The Chinese Journal of Process Engineering, 9, (3), 608-612, (2009)
   

Zhou YM et al., Molecular imprinting-flow injection chemiluminescence method for determination of doxycycline hydrochloride.
Spectroscopy and Spectral Analysis, 29, (7), 1745-1749, (2009)
   

Zhang CL et al., Study on Recognition Mechanism of Molecularly Imprinted Microsphere Using Rifampicin as Template.
Journal of Henan University (Natural Science), 40, (5), 483-488, (2010)
   

Ma TZ

Li XT et al., Molecularly imprinted hydrogel photonic crystals for fast detection of glucose.
Abstracts of Papers of the American Chemical Society, 248, (COLL), 537-(2014)
   

Liu HL et al., Application of an Optosensing Chip Based on Molecularly Imprinted Polymer Coated Quantum Dots for the Highly Selective and Sensitive Determination of Sesamol in Sesame Oils.
Journal of Agricultural and Food Chemistry, 63, (9), 2545-2549, (2015)
   

Ma W

Sun FX et al., Analytical methods and recent developments in the detection of melamine.
TrAC Trends in Analytical Chemistry, 29, (11), 1239-1249, (2010)
   

Cao ZJ et al., Preparation of Magnetic Imprinted Core-Shell Particles Through Reverse Atom Transfer Radical Precipitation Polymerization for Selective Removal of Sulfamethazine.
Journal of Computational and Theoretical Nanoscience, 6, (8), 657-665, (2014)
   

Zhu WJ et al., Magnetic molecularly imprinted microspheres via yeast stabilized Pickering emulsion polymerization for selective recognition of [lambda]-cyhalothrin.
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 453, 27-36, (2014)
   

Ma W et al., Core-shell molecularly imprinted polymers based on magnetic chitosan microspheres for chloramphenicol selective adsorption.
Monatshefte für Chemie - Chemical Monthly, 146, (3), 465-474, (2015)
   

Zhu WJ et al., Well-designed multihollow magnetic imprinted microspheres based on cellulose nanocrystals (CNCs) stabilized Pickering double emulsion polymerization for selective adsorption of bifenthrin.
Chemical Engineering Journal, 276, 249-260, (2015)
   

Sun J et al., Surface hydrophilic imprinted particles via a green precipitation polymerization for selective removal of tetracycline from aqueous solution.
Journal of the Iranian Chemical Society, 13, (3), 489-497, (2016)
   

Ma W et al., Core-shell thermal-responsive and magnetic molecularly imprinted polymers based on mag-yeast for selective adsorption and controlled release of tetracycline.
Journal of the Iranian Chemical Society, 14, (1), 209-219, (2017)
   

Ma W et al., Solid-phase extraction of chlorophenols in seawater using a magnetic ionic liquid molecularly imprinted polymer with incorporated silicon dioxide as a sorbent.
Journal of Chromatography A, 1559, 78-85, (2018)
   

Ma W et al., Molecular imprinted polymers based on magnetic chitosan with different deep eutectic solvent monomers for the selective separation of catechins in black tea.
Electrophoresis, 39, (15), 2039-2046, (2018)
   

Ma WQ

Liu PX et al., Study on preparation and characters of BPA molecular imprinting adsorbent.
Material Science and Technology, 20, (1), 98-102, (2012)
   

Ren YM et al., Synthesis and properties of bisphenol A molecular imprinted particle for selective recognition of BPA from water.
Journal of Colloid and Interface Science, 367, (1), 355-361, (2012)
   

Ren YM et al., The selective binding character of a molecular imprinted particle for Bisphenol A from water.
Water Research, 50, 90-100, (2014)
   

Ma WT

Guo HQ et al., Synthesis of molecularly imprinted polymers using acrylamide-[beta]-cyclodextrin as a cofunctional monomer for the specific capture of tea saponins from the defatted cake extract of Camellia oleifera.
Journal of Separation Science, 39, (22), 4439-4448, (2016)
   

Guo HQ et al., Surface molecular imprinting on carbon microspheres for fast and selective adsorption of perfluorooctane sulfonate.
Journal of Hazardous Materials, 348, 29-38, (2018)
   

Ma WW

Ma WW et al., Preparation and evaluation of a green solvent-based molecularly imprinted monolithic column for the recognition of proteins by high-performance liquid chromatography.
Analyst, 144, (21), 6327-6333, (2019)
   

Ma WW et al., Simultaneous determination of levofloxacin and ciprofloxacin in human urine by ionic-liquid-based, dual-template molecularly imprinted coated graphene oxide monolithic solid-phase extraction.
Journal of Separation Science, 42, (3), 642-649, (2019)
   

Ma WW et al., Novel electrochemical sensing platform based on ion imprinted polymer with nanoporous gold for ultrasensitive and selective determination of As3+.
Microchimica Acta, 187, (10), Article571-(2020)
   

Ma X

Yao J et al., Preparation of metal ion imprinting adsorbent resin by inverse microemulsion polymerization and its performance.
Petrochemical Technology, 37, (4), 397-401, (2008)
   

Zhang SZ et al., Preparation of cholesterol imprinted polymerized organogel and selectivity adsorption ability.
Acta Polymerica Sinica, (4), 390-394, (2011)
   

Chen M et al., Preparation of Magnetic Molecularly Imprinted Polymer for Chlorpyrifos Adsorption and Enrichment.
IOP Conference Series: Materials Science and Engineering, 269, (1), ArticleNo012061-(2017)
   

Jia MF et al., Molecular imprinting technology for microorganism analysis.
TrAC Trends in Analytical Chemistry, 106, 190-201, (2018)
   

Zhang Z et al., Deposition of CdTe quantum dots on microfluidic paper chips for rapid fluorescence detection of pesticide 2, 4-D.
Analyst, 144, (4), 1282-1291, (2019)
   

Hao GY et al., A versatile microfluidic paper chip platform based on MIPs for rapid ratiometric sensing of dual fluorescence signals.
Microchemical Journal, 157, Article105050-(2020)
   

Ma X et al., Novel electrochemical sensing platform based on a molecularly imprinted polymer-decorated 3D-multi-walled carbon nanotube intercalated graphene aerogel for selective and sensitive detection of dopamine.
Analytical Methods, 12, (14), 1845-1851, (2020)
   

Ma X et al., Hierarchical porous MXene/amino carbon nanotubes-based molecular imprinting sensor for highly sensitive and selective sensing of fisetin.
Sensors and Actuators B: Chemical, 309, Article127815-(2020)
   

Ma X et al., Recognition and selective extraction of poly-[gamma]-glutamic acid based on molecular imprinting technology.
International Journal of Biological Macromolecules, 172, 1-9, (2021)
   

Ma XB

Yang YZ et al., Ultrasensitive detection of bisphenol A in aqueous media using photoresponsive surface molecular imprinting polymer microspheres.
New Journal of Chemistry, 38, (4), 1780-1788, (2014)
   

Li ZY et al., Photocontrolled solid-phase extraction of guanine from complex samples using a novel photoresponsive molecularly imprinted polymer.
Food Chemistry, 172, 56-62, (2015)
   

Liu HD et al., A photoswitchable organocatalyst based on a catalyst-imprinted polymer containing azobenzene.
RSC Advances, 5, (77), 62539-62542, (2015)
   

Zeng SM et al., Molecularly imprinted polymer for selective extraction and simultaneous determination of four tropane alkaloids from Przewalskia tangutica Maxim. fruit extracts using LC-MS/MS.
RSC Advances, 5, (115), 94997-95006, (2015)
   

Tang Q et al., Photoresponsive surface molecularly imprinted polymer on ZnO nanorods for uric acid detection in physiological fluids.
Materials Science and Engineering: C, 66, 33-39, (2016)
   

Wang Q et al., Photoresponsive molecularly imprinted hydrogel casting membrane for the determination of trace tetracycline in milk.
Journal of Molecular Recognition, 29, (3), 123-130, (2016)
   

Zeng SM et al., Analysis of Four Tropane Alkaloids in Przewalskia Tangutica Maxim.by Analogous-specific Molecularly Imprinted Solid-phase Extraction Combined with High Performance Liquid Chromatography.
Journal of Instrumental Analysis, 35, (4), 373-379, (2016)
   

Hong SH et al., Biomimetic enzyme-linked immunoassay based on a molecularly imprinted 96-well plate for the determination of triazophos residues in real samples.
RSC Advances, 8, (37), 20549-20556, (2018)
   

Ma XB et al., Extraction and identification of matrine-type alkaloids from Sophora moorcroftiana using double-templated molecularly imprinted polymers with HPLCGÇôMS/MS.
Journal of Separation Science, 41, (7), 1691-1703, (2018)
   

Ma XB et al., Preparation and characterization of dummy molecularly imprinted polymers for separation and determination of farrerol from Rhododendron aganniphum using HPLC.
Green Chemistry Letters and Reviews, 11, (4), 513-522, (2018)
   

Ma XB et al., Magnetic molecularly imprinted polymers doped with graphene oxide for the selective recognition and extraction of four flavonoids from Rhododendron species.
Journal of Chromatography A, 1598, 39-48, (2019)
   

Ma XB et al., Magnetic molecularly imprinted specific solid-phase extraction for determination of dihydroquercetin from Larix griffithiana using HPLC.
Journal of Separation Science, 43, (12), 2301-2310, (2020)
   

Ma XD

Zhao MY et al., Molecularly imprinted polymer silica monolith for the selective extraction of alpha-cypermethrin from soil samples.
Journal of Materials Science, 51, (7), 3440-3447, (2016)
   

Ma XG

Chen Y et al., Use of a new magnetic ion-imprinted nanocomposite adsorbent for selective and rapid preconcentration and determination of trace nickel by flame atomic absorption spectrometry.
Analytical Methods, 8, (4), 824-829, (2016)
   

Li CY et al., Magnetic molecularly imprinted polymer nanoparticles-based solid-phase extraction coupled with gas chromatography-mass spectrometry for selective determination of trace di-(2-ethylhexyl) phthalate in water samples.
Analytical and Bioanalytical Chemistry, 408, (27), 7857-7864, (2016)
   

Li CY et al., Preparation of magnetic molecularly imprinted polymer nanoparticles by surface imprinting by a sol-gel process for the selective and rapid removal of di-(2-ethylhexyl) phthalate from aqueous solution.
Journal of Separation Science, 40, (7), 1621-1628, (2017)
   

Huang RF et al., A novel ion-imprinted polymer based on graphene oxide-mesoporous silica nanosheet for fast and efficient removal of chromium (VI) from aqueous solution.
Journal of Colloid and Interface Science, 514, 544-553, (2018)
   

Li X et al., Synthesis of a molecularly imprinted polymer on mSiO2@Fe3O4 for the selective adsorption of atrazine.
Journal of Separation Science, 41, (13), 2837-2845, (2018)
   

Guo LH et al., Preparation of dual-dummy-template molecularly imprinted polymers coated magnetic graphene oxide for separation and enrichment of phthalate esters in water.
Chemical Engineering Journal, 361, 245-255, (2019)
   

Li J et al., Preparation of Molecularly Imprinted Polymer Sensor on Electrochemically Reduced Graphene Oxide Modified Electrode for Selective Probing of Thiabendazole.
Journal of The Electrochemical Society, 166, (2), B84-B91, (2019)
   

Xie XW et al., Novel magnetic multi-templates molecularly imprinted polymer for selective and rapid removal and detection of alkylphenols in water.
Chemical Engineering Journal, 357, 56-65, (2019)
   

Zhang MY et al., Selective fluorescence sensor based on ion-imprinted polymer-modified quantum dots for trace detection of Cr(VI) in aqueous solution.
Analytical and Bioanalytical Chemistry, 411, (27), 7165-7175, (2019)
   

Ma XH

Li H et al., Synthesis of magnetic molecularly imprinted polymer particles for selective adsorption and separation of dibenzothiophene.
Microchimica Acta, 179, (1-2), 123-130, (2012)
   

Liu N et al., Rapid and multiple detections of staphylococcal enterotoxins by two-dimensional molecularly imprinted film-coated QCM sensor.
Sensors and Actuators B: Chemical, 191, 326-331, (2014)
   

Ye YT et al., Theophylline Molecular Imprinted Composite Membranes Prepared on a Ceramic Hollow Fiber Substrate.
Industrial & Engineering Chemistry Research, 53, (1), 346-354, (2014)
   

Ma XH et al., A Review on Bio-macromolecular Imprinted Sensors and Their Applications.
Chinese Journal of Analytical Chemistry, 44, (1), 152-159, (2016)
   

Chen J et al., Detection of Organophosphorus Pesticide Residues in Leaf Lettuce and Cucumber Through Molecularly Imprinted Solid-Phase Extraction Coupled to Gas Chromatography.
Food Analytical Methods, 10, (10), 3452-3461, (2017)
   

Wei XP et al., Highly sensitive analysis of organometallic compounds based on molecularly imprinted electrochemical sensors.
Analytical Methods, 9, (11), 1771-1778, (2017)
   

Wu T et al., Amperometric sensing of L-phenylalanine using a gold electrode modified with a metal organic framework, a molecularly imprinted polymer, and [beta]-cyclodextrin-functionalized gold nanoparticles.
Microchimica Acta, 184, (8), 2901-2907, (2017)
   

Zhao CJ et al., An Insulin Molecularly Imprinted Electrochemical Sensor Based on Epitope Imprinting.
Chinese Journal of Analytical Chemistry, 45, (9), 1360-1366, (2017)
   

Li JP et al., Does polysaccharide is an idea template selection for glycosyl imprinting?
Biosensors and Bioelectronics, 99, 438-442, (2018)
   

Li SH et al., A microfluidic chip containing a molecularly imprinted polymer and a DNA aptamer for voltammetric determination of carbofuran.
Microchimica Acta, 185, (6), ArticleNo295-(2018)
   

Ma XH et al., A Cu(II)-anchored unzipped covalent triazine framework with peroxidase-mimicking properties for molecular imprinting-based electrochemiluminescent detection of sulfaquinoxaline.
Microchimica Acta, 185, (12), ArticleNo546-(2018)
   

Li SH et al., Molecularly imprinted electroluminescence switch sensor with a dual recognition effect for determination of ultra-trace levels of cobalt (II).
Biosensors and Bioelectronics, 139, Article111321-(2019)
   

Li SH et al., Fluorometric aptasensor for cadmium(II) by using an aptamer-imprinted polymer as the recognition element.
Microchimica Acta, 186, (12), Article823-(2019)
   

Li SH et al., Highly selective molecular imprinting electrochemiluminescence switch sensor for biotoxin L-canavanine measurement.
Microchemical Journal, 148, 397-403, (2019)
   

Ma XH et al., Synthesis of Zr-coordinated amide porphyrin-based two-dimensional covalent organic framework at liquid-liquid interface for electrochemical sensing of tetracycline.
Biosensors and Bioelectronics, 146, Article111734-(2019)
   

Li SH et al., Novel molecularly imprinted amoxicillin sensor based on a dual recognition and dual detection strategy.
Analytica Chimica Acta, 1127, 69-78, (2020)
   

Li SH et al., Chiral drug fluorometry based on a calix[6]arene/molecularly imprinted polymer double recognition element grafted on nano-C-dots/Ir/Au.
Microchimica Acta, 187, (7), Article394-(2020)
   

Li SH et al., A gold nanoparticle-loaded molecularly imprinted switch sensor with high sensitivity to ethephon.
Microchemical Journal, 157, Article105025-(2020)
   

Ma XH et al., A strategy for construction of highly sensitive glycosyl imprinted electrochemical sensor based on sandwich-like multiple signal enhancement and determination of neural cell adhesion molecule.
Biosensors and Bioelectronics, 156, Article112150-(2020)
   

Li SH et al., Novel chloramphenicol sensor based on aggregation-induced electrochemiluminescence and nanozyme amplification.
Biosensors and Bioelectronics, 176, Article112944-(2021)
   

Li SH et al., Microfluidic paper-based chip for parathion-methyl detection based on a double catalytic amplification strategy.
Microchimica Acta, 188, (12), 438-(2021)
   

Ma XH et al., An electrochemiluminescence sensor of magnetic glycosyl-imprinted microspheres based on multi-probe signal amplification for CD44v6 determination.
Sensors and Actuators B: Chemical, 333, Article129562-(2021)
   

Ma XJ

Yuan Y et al., Molecularly Imprinted Porous Aromatic Frameworks and Their Composite Components for Selective Extraction of Uranium Ions.
Advanced Materials, 30, (12), ArticleNo1706507-(2018)
   

Yuan Y et al., Molecularly Imprinted Porous Aromatic Frameworks Serving as Porous Artificial Enzymes.
Advanced Materials, 30, (27), 1800069-(2018)
   

Ma XL

Huang LM et al., Interaction between Molecularly Imprinted CS Membrane and Naringin Template.
Guangzhou Chemistry, 34, (1), 27-31, (2009)
   

Ma XL et al., Preparation and Application of Naringin Sensor Based on Molecularly Imprinting Technique.
Chinese Journal of Analytical Chemistry, 38, (1), 100-104, (2010)
   

Ma XL et al., Preparation and Recognition of Naringin Molecularly Imprinted Membranes in Aqueous Media.
Acta Polymerica Sinica, (4), 416-422, (2010)
   

Ma XL et al., Preparation of Imprinted PVB/[beta]-CD Nanofiber by Electrospinning Technique and Its Selective Binding Abilities for Naringin.
Chinese Journal of Chemistry, 29, (8), 1753-1758, (2011)
   

Ma XL et al., Imprinted [beta]-cyclodextrin polymers using naringin as template.
Polymer International, 60, (10), 1455-1460, (2011)
   

Ma XL et al., Preparation and Property Studies of Naringin Imprinting [beta]-Cyclodextrin Polymer.
Acta Chimica Sinica, 69, (6), 739-744, (2011)
   

Ma XL et al., Preparation of molecularly imprinted CS membrane for recognizing naringin in aqueous media.
Polymer Bulletin, 66, (6), 853-863, (2011)
   

Zheng X et al., Proceeding, Imprinted [beta]-Cyclodextrin Polymer for Recognition of Naringin, 
Sang XM, Wang PC, Ai LQ, Li YG, Bu JL (Eds.), 1850-1853, (2011)
   

Chen S et al., Efficient Separation and Purification of Epigallocatechin Gallate (EGCG) Based on EGCG-Imprinted Polymer Prepared with Chitosan as Matrix.
Analytical Letters, 45, (16), 2300-2309, (2012)
   

Ma XL et al., The cooperative utilization of imprinting, electro-spinning and a pore-forming agent to synthesise [beta]-cyclodextrin polymers with enhanced recognition of naringin.
RSC Advances, 3, (47), 25396-25402, (2013)
   

Ji WH et al., Molecularly imprinted polymers with synthetic dummy template for simultaneously selective removal and enrichment of ginkgolic acids from Ginkgo biloba L. leaves extracts.
Journal of Chromatography A, 1368, 44-51, (2014)
   

Ji WH et al., Molecularly imprinted polymers with novel functional monomer for selective solid-phase extraction of gastrodin from the aqueous extract of Gastrodia elata.
Journal of Chromatography A, 1342, 1-7, (2014)
   

Ma XL et al., Water-compatible imprinted polymers based on CS@SiO2 particles for selective recognition of naringin.
Journal of Applied Polymer Science, 131, (13), Article No 40491-(2014)
   

Ji WH et al., Preparation of the high purity gingerols from ginger by dummy molecularly imprinted polymers.
Journal of Chromatography A, 1387, 24-31, (2015)
   

Ma XL et al., Sensing 2, 4, 6-tribromophenol based on molecularly imprinted technology.
Monatshefte für Chemie - Chemical Monthly, 146, (3), 485-491, (2015)
   

Ma XL et al., Molecularly imprinted polymers with synthetic dummy templates for the preparation of capsaicin and dihydrocapsaicin from chili peppers.
Journal of Separation Science, 38, (1), 100-107, (2015)
   

Zhao HX et al., Selective detection of TNT using molecularly imprinted polymer microsphere.
Desalination and Water Treatment, 55, (1), 278-283, (2015)
   

Du X et al., A novel electroactive [lambda]-MnO2/PPy/PSS core-shell nanorod coated electrode for selective recovery of lithium ions at low concentration.
Journal of Materials Chemistry A, 4, (36), 13989-13996, (2016)
   

Huang LM et al., Molecularly Imprinted Nanofiber Film for Sensitive Sensing 2, 4, 6-Tribromophenol.
Polymers, 8, (6), ArticleNo222-(2016)
   

Ji WH et al., Water-compatible molecularly imprinted polymers for selective solid phase extraction of dencichine from the aqueous extract of Panax notoginseng.
Journal of Chromatography B, 1008, 225-233, (2016)
   

Ma XL et al., Ultrasensitive sensing of tris(2, 3-dibromopropyl) isocyanurate based on the synergistic effect of amino and hydroxyl groups of a molecularly imprinted poly(o-aminophenol) film.
New Journal of Chemistry, 40, (2), 1649-1654, (2016)
   

Zhuo KL et al., Molecularly imprinted polymer based potentiometric sensor for the determination of 1-hexyl-3-methylimidazolium cation in aqueous solution.
Ionics, 22, (10), 1947-1955, (2016)
   

Huang LM et al., A Facile Approach to Preparing Molecularly Imprinted Chitosan for Detecting 2, 4, 6-Tribromophenol with a Widely Linear Range.
Environments, 4, (2), ArticleNo30-(2017)
   

Ma XM

Wang XM et al., Preparation and evaluation of magnetic core-shell mesoporous molecularly imprinted polymers for selective adsorption of tetrabromobisphenol S.
Talanta, 166, 300-305, (2017)
   

Lu CX et al., Computer-aided design of magnetic dummy molecularly imprinted polymers for solid-phase extraction of ten phthalates from food prior to their determination by GC-MS/MS.
Microchimica Acta, 185, (8), ArticleNo373-(2018)
   

Lu CX et al., Surface molecularly imprinted polymers prepared by two-step precipitation polymerization for the selective extraction of oleanolic acid from grape pomace extract.
Journal of Separation Science, 41, (17), 3496-3502, (2018)
   

Wang XM et al., Magnetic mesoporous molecularly imprinted polymers based on surface precipitation polymerization for selective enrichment of triclosan and triclocarban.
Journal of Chromatography A, 1537, 35-42, (2018)
   

Wang P et al., Janus silica nanosheets-based MMIPs platform for synergetic selective capture and fast separation of 2'-deoxyadenosine: Two different components segmented on the surface of one object.
Chemical Engineering Journal, 369, 793-802, (2019)
   

Wang XM et al., Enhanced in-out-tube solid-phase microextraction by molecularly imprinted polymers-coated capillary followed by HPLC for Endocrine Disrupting Chemicals analysis.
Talanta, 194, 7-13, (2019)
   

Ma XQ

Ma XQ et al., Solanesol extraction from tobacco leaves by Flash chromatography based on molecularly imprinted polymers.
Journal of Chromatography B, 1020, 1-5, (2016)
   

Ma XR

Zhang B et al., Ultrasensitive and selective assay of glutathione species in arsenic trioxide-treated leukemia HL-60 cell line by molecularly imprinted polymer decorated electrochemical sensors.
Biosensors and Bioelectronics, 80, 491-496, (2016)
   

Ma XT

Gao FX et al., Smart surface imprinting polymer nanospheres for selective recognition and separation of glycoprotein.
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 433, 191-199, (2013)
   

Gao FX et al., Preparation of boronic acid functionalized magnetic surface molecularly imprinted polymer and its recognition of the target glycoprotein.
Chinese Journal of Analysis Laboratory, 33, (2), 125-128, (2014)
   

Ma XT et al., Epitope molecularly imprinted polymer coated quartz crystal microbalance sensor for the determination of human serum albumin.
Sensors and Actuators B: Chemical, 246, 879-886, (2017)
   

Zhang XM et al., Silicon nanoparticles coated with an epitope-imprinted polymer for fluorometric determination of cytochrome c.
Microchimica Acta, 185, (3), ArticleNo173-(2018)
   

Ma XT et al., Oriented surface epitope imprinted polymer-based quartz crystal microbalance sensor for cytochrome c.
Talanta, 191, 222-228, (2019)
   

Zhang Y et al., Carbon dots-embedded epitope imprinted polymer for targeted fluorescence imaging of cervical cancer via recognition of epidermal growth factor receptor.
Microchimica Acta, 187, (4), Article228-(2020)
   

Ma XW

Zhou C et al., A Selective Joint Determination of Salicylic Acid in Actinidia chinensis Combining a Molecularly Imprinted Monolithic Column and a Graphene Oxide Modified Electrode.
Analytical Sciences, 34, (7), 823-829, (2018)
   

Ma XX

Lu CY et al., Preparation and evaluation of molecularly imprinted polymers using herbicide picloram as template.
Acta Chimica Sinica, 62, (8), 799-803, (2004)
   

Lu CY et al., Preparation and selective permeation characterization of molecularly imprinted membranes with o-vanillin as template.
Acta Chimica Sinica, 63, (6), 479-483, (2005)
   

Lu CY et al., Preparation and permeation properties of molecularly imprinted polymer membranes with norfloxacin as template.
Chemical Journal of Chinese Universities, 26, (7), 1356-1359, (2005)
   

Ma XX et al., Permeation characteristics of cobalt(II)-complex molecularly imprinted polymer membranes.
Acta Chimica Sinica, 63, (18), 1681-1685, (2005)
   

Ma XX et al., Binding selectivity and permeation characterization of molecularly imprinted polymer membranes with paracetamol as template.
Acta Chimica Sinica, 64, (23), 2369-2374, (2006)
   

Ma XX et al., Studies on binding of molecularly-imprinted polymer composite membranes to coumarin-3-carboxylic acid as template and permeable selectivity.
Chemical Journal of Chinese Universities, 27, (7), 1237-1241, (2006)
   

Jiang YF et al., Study on targeted separation of atractylenolide IQ from traditional Chinese herbs by molecularly imprinted solid phase extraction.
Chinese Pharmaceutical Journal, 47, (13), 1077-1080, (2012)
   

Yin XY et al., Correlation study between molecular structure of sesquiterpene lactones and the selective adsorption performance of molecularly imprinted polymers.
Journal of Chromatography A, 1354, 9-17, (2014)
   

Ma XY

Qu X et al., Selective extraction of bioactive glycoprotein in neutral environment through Concanavalin A mediated template immobilization and dopamine surface imprinting.
RSC Advances, 6, (89), 86455-86463, (2016)
   

Ma Y

Pan GQ et al., Efficient One-Pot Synthesis of Water-Compatible Molecularly Imprinted Polymer Microspheres by Facile RAFT Precipitation Polymerization.
Angewandte Chemie International Edition, 50, (49), 11731-11734, (2011)
   

Pan GQ et al., Controlled synthesis of water-compatible molecularly imprinted polymer microspheres with ultrathin hydrophilic polymer shells via surface-initiated reversible addition-fragmentation chain transfer polymerization.
Soft Matter, 7, (18), 8428-8439, (2011)
   

Lv YK et al., Grafting of norfloxacin imprinted polymeric membranes on silica surface for the selective solid-phase extraction of fluoroquinolones in fish samples.
Talanta, 89, (1), 270-275, (2012)
   

Ma Y et al., Efficient synthesis of narrowly dispersed molecularly imprinted polymer microspheres with multiple stimuli-responsive template binding properties in aqueous media.
Chemical Communications, 48, (50), 6217-6219, (2012)
   

Ma Y et al., Narrowly Dispersed Molecularly Imprinted Polymer Microspheres with Photo- and Thermo-Responsive Template Binding Properties in Pure Aqueous Media by RAFT Polymerization.
Molecular Imprinting, 1, (1), 3-16, (2012)
   

Xin JH et al., Simultaneous separation and determination of eight organophosphorous pesticide residues in vegetables through molecularly imprinted solid-phase extraction coupled to gas chromatography.
Journal of Separation Science, 35, (24), 3501-3508, (2012)
   

Ma Y et al., Comparative study of the molecularly imprinted polymers prepared by reversible addition-fragmentation chain transfer ''bulk'' polymerization and traditional radical ''bulk'' polymerization.
Journal of Molecular Recognition, 26, (5), 240-251, (2013)
   

Ma Y et al., Narrowly Dispersed Hydrophilic Molecularly Imprinted Polymer Nanoparticles for Efficient Molecular Recognition in Real Aqueous Samples Including River Water, Milk, and Bovine Serum.
Angewandte Chemie International Edition, 52, (5), 1511-1514, (2013)
   

Pan GQ et al., Thermo-Responsive Hydrogel Layers Imprinted with RGDS Peptide: A System for Harvesting Cell Sheets.
Angewandte Chemie International Edition, 52, (27), 6907-6911, (2013)
   

Wang XL et al., Simultaneous Determination of Nine Trace Organophosphorous Pesticide Residues in Fruit Samples Using Molecularly Imprinted Matrix Solid-Phase Dispersion Followed by Gas Chromatography.
Journal of Agricultural and Food Chemistry, 61, (16), 3821-3827, (2013)
   

Xu LH et al., Preparation of a Hydrophilic Molecularly Imprinted Polymer and Its Application in Solid-Phase Extraction to Determine of Trace Acrylamide in Foods Coupled with High-Performance Liquid Chromatography.
Food Analytical Methods, 6, (3), 838-844, (2013)
   

Ma Y et al., Efficient one-pot synthesis of water-compatible and photoresponsive molecularly imprinted polymer nanoparticles by facile RAFT precipitation polymerization.
Journal of Polymer Science Part A: Polymer Chemistry, 52, (14), 1941-1952, (2014)
   

Sun Q et al., Study on a biomimetic enzyme-linked immunosorbent assay method for rapid determination of trace acrylamide in French fries and cracker samples.
Journal of the Science of Food and Agriculture, 94, (1), 102-108, (2014)
   

Chen W et al., Molecularly Imprinted Polymers with Stimuli-Responsive Affinity: Progress and Perspectives.
Polymers, 7, (9), 1689-1715, (2015)
   

Li CX et al., Hydrophilic Hollow Molecularly Imprinted Polymer Microparticles with Photo- and Thermoresponsive Template Binding and Release Properties in Aqueous Media.
ACS Applied Materials & Interfaces, 7, (49), 27340-27350, (2015)
   

Tang YW et al., Upconversion particles coated with molecularly imprinted polymers as fluorescence probe for detection of clenbuterol.
Biosensors and Bioelectronics, 71, 44-50, (2015)
   

Zhao T et al., Preparation of temperature sensitive molecularly imprinted polymer for solid-phase microextraction coatings on stainless steel fiber to measure ofloxacin.
Analytica Chimica Acta, 853, 668-675, (2015)
   

Pan JM et al., Hierarchical porous molecule/ion imprinted polymers with double specific binding sites: Combination of Pickering HIPEs template and pore-filled strategy.
Chemical Engineering Journal, 301, 210-221, (2016)
   

Shen XL et al., Molecularly imprinted electrochemical sensor for advanced diagnosis of alpha-fetoprotein.
Analytical Methods, 8, (40), 7361-7368, (2016)
   

Tang YW et al., Preconcentration of the antibiotic enrofloxacin using a hollow molecularly imprinted polymer, and its quantitation by HPLC.
Microchimica Acta, 183, (2), 589-596, (2016)
   

Tang YW et al., Determination of ractopamine in pork using a magnetic molecularly imprinted polymer as adsorbent followed by HPLC.
Food Chemistry, 201, 72-79, (2016)
   

Yin YJ et al., Rationally designed hybrid molecularly imprinted polymer foam for highly efficient [lambda]-cyhalothrin recognition and uptake via twice imprinting strategy.
Chemical Engineering Journal, 286, 485-496, (2016)
   

Ma Y et al., A multi-walled carbon nanotubes based molecularly imprinted polymers electrochemical sensor for the sensitive determination of HIV-p24.
Talanta, 164, 121-127, (2017)
   

Ma Y et al., MIPs-graphene nanoplatelets-MWCNTs modified glassy carbon electrode for the determination of cardiac troponin I.
Analytical Biochemistry, 520, 9-15, (2017)
   

Ma Y et al., A glassy carbon electrode modified with graphene nanoplatelets, gold nanoparticles and chitosan, and coated with a molecularly imprinted polymer for highly sensitive determination of prostate specific antigen.
Microchimica Acta, 184, (11), 4469-4476, (2017)
   

Shen XL et al., Ultrasensitive Determination of Human Chorionic Gonadotropin using a Molecularly Imprinted Electrochemical Sensor.
ChemistrySelect, 2, (22), 6549-6555, (2017)
   

Wu YL et al., Porous and Magnetic Molecularly Imprinted Polymers via Pickering High Internal Phase Emulsions Polymerization for Selective Adsorption of [lambda]-Cyhalothrin.
Frontiers in Chemistry, 5, ArticleNo18-(2017)
   

Zhu HJ et al., Ion/molecule imprinted polymers with double binding sites via twice imprinting strategy for selective and simultaneous removal of [lambda]-cyhalothrin and Cu(II).
Journal of Industrial and Engineering Chemistry, 49, 198-207, (2017)
   

Bai X et al., Specific uptake luteolin by boronate affinity-based single-hole hollow imprinted polymers sealed in dialysis bags.
Chemical Engineering Journal, 353, 911-919, (2018)
   

Jia Q et al., Selective recognition and separation of luteolin based on the molecular imprinted hollow SnO2 and boronate affinity.
Chemical Engineering Journal, 342, 293-303, (2018)
   

Liu JX et al., A versatile strategy to fabricate dual-imprinted porous adsorbent for efficient treatment co-contamination of [lambda]-cyhalothrin and copper(II).
Chemical Engineering Journal, 332, 517-527, (2018)
   

Pan JM et al., Molecularly imprinted polymers as receptor mimics for selective cell recognition.
Chemical Society Reviews, 47, (15), 5574-5587, (2018)
   

Adams JD et al., A Molecularly Imprinted Polymer-Graphene Sensor Antenna Hybrid for Ultra Sensitive Chemical Detection.
IEEE Sensors Journal, 19, (16), 6571-6577, (2019)
   

Dong XZ et al., Preparation of pH and temperature dual-sensitive molecularly imprinted polymers based on chitosan and N-isopropylacrylamide for recognition of bovine serum albumin.
Polymer International, 68, (5), 955-963, (2019)
   

He PY et al., Rational design and fabrication of surface molecularly imprinted polymers based on multi-boronic acid sites for selective capture glycoproteins.
Chemical Engineering Journal, 367, 55-63, (2019)
   

Ma Y et al., Sensitive electrochemical detection of gp120 based on the combination of NBD-556 and gp120.
Talanta, 196, 486-492, (2019)
   

Wang P et al., Double affinity integrated MIPs nanoparticles for specific separation of glycoproteins: A combination of synergistic multiple bindings and imprinting effect.
Chemical Engineering Journal, 358, 143-152, (2019)
   

Yao JT et al., Janus-like boronate affinity magnetic molecularly imprinted nanobottles for specific adsorption and fast separation of luteolin.
Chemical Engineering Journal, 356, 436-444, (2019)
   

Zhou JJ et al., Surface molecularly imprinted thermo-sensitive polymers based on light-weight hollow magnetic microspheres for specific recognition of BSA.
Applied Surface Science, 486, 265-273, (2019)
   

Liang T et al., Mesoporous structured molecularly imprinted polymer with restricted access function for highly selective extraction of chlorpyrifos from soil.
Journal of Chromatography A, 1609, Article460453-(2020)
   

Ma Y et al., A nanospherical conjugated microporous polymer-graphene nanosheets modified molecularly imprinted electrochemical sensor for high sensitivity detection of [alpha]-Synuclein.
Journal of Electroanalytical Chemistry, 862, Article113994-(2020)
   

Wang YF et al., Thermo-sensitive surface molecularly imprinted magnetic microspheres based on bio-macromolecules and their specific recognition of bovine serum albumin.
Journal of Separation Science, 43, (5), 996-1002, (2020)
   

Ma Y et al., Porous carbon derived from ZIF-8 modified molecularly imprinted electrochemical sensor for the detection of tert-butyl hydroquinone (TBHQ) in edible oil.
Food Chemistry, 365, Article130462-(2021)
   

Wang LL et al., High selectivity sensing of bovine serum albumin: The combination of glass nanopore and molecularly imprinted technology.
Biosensors and Bioelectronics, 178, Article113056-(2021)
   

Zhao WY et al., Development of a novel sensing platform based on molecularly imprinted polymer and closed bipolar electrochemiluminescence for sensitive detection of dopamine.
Journal of Electroanalytical Chemistry, 888, Article115215-(2021)
   

Ma YC

Dong ZH et al., Selective removal of tungstate anions from aqueous solutions by surface anion-imprinted ceramic membranes.
Journal of Chemical Technology & Biotechnology, 94, (3), 942-954, (2019)
   

Ma YF

Ma YF et al., Study of molecular imprinting polymer made of chitosan and BSA by AFM.
Polymer Materials Science and Engineering, 23, (2), 235-237, (2007)
   

Ma YF et al., Electrochemical synthesis of L-tryotophan molecular imprinting film sensor and its application.
Journal of Shandong Agricultural University (Natural Science), 40, (2), 254-258, (2009)
   

Ma YF et al., Determination of atrazine in soil sample based on molecularly imprinted film electrochemical sensors.
Chemical Research and Application, 21, (5), 624-629, (2009)
   

Huang YY et al., Rapid and sensitive detection of trace malachite green and its metabolite in aquatic products using molecularly imprinted polymer-coated wooden-tip electrospray ionization mass spectrometry.
RSC Advances, 7, (82), 52091-52100, (2017)
   

Liang WX et al., Combining Pickering Emulsion Polymerization with Molecular Imprinting to Prepare Polymer Microspheres for Selective Solid-Phase Extraction of Malachite Green.
Polymers, 9, (8), ArticleNo344-(2017)
   

Liang WX et al., Functionalization of Molecularly Imprinted Polymer Microspheres for the Highly Selective Removal of Contaminants from Aqueous Solutions and the Analysis of Food-Grade Fish Samples.
Polymers, 10, (10), ArticleNo1130-(2018)
   

Bedwell TS et al., New protocol for optimisation of polymer composition for imprinting of peptides and proteins.
RSC Advances, 9, (48), 27849-27855, (2019)
   

Ma YH

Ma YH et al., Recent developments in chiral analysis of [beta]-blocker drugs by capillary electromigration techniques.
Electrophoresis, 35, (23), 3345-3354, (2014)
   

Hu YY et al., Surface-imprinted polymer microsphere based on self-stabilized precipitation polymerization for selective removal of norfloxacin.
Applied Surface Science, 574, Article151706-(2022)
   

Ma YJ

Kang JW et al., Study on preparation and characterization of 2, 4-D molecularly imprinted polymer.
Journal of Northwest Normal University (Natural Science), 42, (3), 58-61, (2006)
   

Wang ZH et al., Voltammetric response of 2, 4-D-molecularly imprinted film modified glassy carbon electrodes.
Indian Journal of Chemistry Section A-Inorganic Bio-Inorganic Physical Theoretical & Analytical Chemistry, 45, (8), 1848-1851, (2006)
   

Wang ZH et al., Studies on the permeation characteristics of molecularly imprinted polymer membranes with Zinc(II)-quercetin complex as template.
Acta Chimica Sinica, 65, (18), 2019-2024, (2007)
   

Wang ZH et al., Capacitive detection of theophylline based on electropolymerized molecularly imprinted polymer.
International Journal of Polymer Analysis and Characterization, 12, (2), 131-142, (2007)
   

Zhou M et al., Determination of Maleic Hydrazide in Vegetables by Molecularly Imprinting Solid Phase Extraction-Chemiluminescence Method.
Food Science, 33, (24), 205-209, (2012)
   

Zhu L et al., Determination of 16 polycyclic aromatic hydrocarbons with European priority in smoked meat by molecularly imprinted solid-phase extraction.
Journal of Food Safety and Quality, 4, (3), 911-916, (2013)
   

Xie YH et al., Proceeding, Preparation of Fe3O4 Magnetic Surface Imprinted Microspheres and the Ethyl Acetate Extract Flavonoids Raspberry Concentration of Active Ingredient Applied, 
ArticleNo06081, (2016)
   

Xie YH et al., Proceeding, Preparation of mixed molecularly imprinted polymer magnetic nanoparticles and its application in separation of Chinese traditional medicine, 
ArticleNo020209, (2017)
   

Tang T et al., Determination of semicarbazide in fish by molecularly imprinted stir bar sorptive extraction coupled with high performance liquid chromatography.
Journal of Chromatography B, 1076, 8-14, (2018)
   

Ma YJ et al., Well-defined biological sample-compatible molecularly imprinted polymer microspheres by combining RAFT polymerization and thiol-epoxy coupling chemistry.
Journal of Materials Chemistry B, 7, (15), 2474-2483, (2019)
   

Zhang W et al., Study on Unbalanced Competitive Adsorption of Two Ginsenosides by Molecularly Imprinted Polymers.
Key Engineering Materials, 821, 144-152, (2019)
   

Qin YT et al., Tumor-Sensitive Biodegradable Nanoparticles of Molecularly Imprinted Polymer-Stabilized Fluorescent Zeolitic Imidazolate Framework-8 for Targeted Imaging and Drug Delivery.
ACS Applied Materials & Interfaces, 12, (22), 24585-24598, (2020)
   

Qin YT et al., Targeted Mitochondrial Fluorescence Imaging-Guided Tumor Antimetabolic Therapy with the Imprinted Polymer Nanomedicine Capable of Specifically Recognizing Dihydrofolate Reductase.
ACS Applied Materials & Interfaces, 13, (34), 40332-40341, (2021)
   

Ma YK

Liu WL et al., Molecularly imprinted polymers on graphene oxide surface for EIS sensing of testosterone.
Biosensors and Bioelectronics, 92, 305-312, (2017)
   

Ma YK et al., Stainless Steel Wire Mesh Supported Molecularly Imprinted Composite Membranes for Selective Separation of Ebracteolata Compound B from Euphorbia fischeriana.
Molecules, 24, (3), ArticleNo565-(2019)
   

Ma YL

Wen YY et al., Molecularly imprinted matrix solid-phase dispersion coupled to micellar electrokinetic chromatography for simultaneous determination of triazines in soil, fruit, and vegetable samples.
Electrophoresis, 33, (15), 2454-2463, (2012)
   

Xiang GQ et al., A surface ion imprinted magnetic silica sorbent for the separation and determination of leaching silver in antibacterial food contact products.
Canadian Journal of Chemistry - Revue Canadienne de Chimie, 93, (6), 621-625, (2015)
   

Ma YM

Chen TF et al., System-level Study on Synergism and Antagonism of Active Ingredients in Traditional Chinese Medicine by Using Molecular Imprinting Technology.
Scientific Reports, 4, Article No 7159-(2014)
   

Ma YM et al., Construction of an NAND logic gate based on molecularly imprinted dual-emission quantum dot composites for the detection of antibiotics.
Analytical Methods, 11, (15), 2033-2040, (2019)
   

Ma YN

Ao JJ et al., Applying molecular modelling and experimental studies to develop molecularly imprinted polymer for domoic acid enrichment from both seawater and shellfish.
Chemosphere, 199, 98-106, (2018)
   

Ma YQ

Xue Y et al., Rapid detection of orange II dyes in water with SERS imprinted sensor based on PDA-modified MOFs@Ag.
Journal of Environmental Chemical Engineering, 9, (6), Article106317-(2021)
   

Ma YR

Liu BZ et al., Voltammetric Determination of Sulfadiazine Based on Molecular Imprinted Electrochemical Sensor.
International Journal of Electrochemical Science, 15, 9590-9596, (2020)
   

Zhang YF et al., Fabrication of Surface-Imprinted Magnetic Wrinkled Microspheres and Their Specific Adsorption of BSA.
Industrial & Engineering Chemistry Research, 60, (30), 11277-11288, (2021)
   

Ma YS

Tang T et al., Determination of semicarbazide in fish by molecularly imprinted stir bar sorptive extraction coupled with high performance liquid chromatography.
Journal of Chromatography B, 1076, 8-14, (2018)
   

Ma YX

Ma YX et al., Magnetic-luminescent bifunctional nanosensors.
Journal of Materials Chemistry, 22, (36), 18761-18767, (2012)
   

Zhao YY et al., Composite QDs@MIP Nanospheres for Specific Recognition and Direct Fluorescent Quantification of Pesticides in Aqueous Media.
Analytical Chemistry, 84, (1), 386-395, (2012)
   

Zhao YY et al., Correction to Composite QDs@MIP Nanospheres for Specific Recognition and Direct Fluorescent Quantification of Pesticides in Aqueous Media.
Analytical Chemistry, 84, (12), 5447-5447, (2012)
   

Wang RJ et al., Preparation and Adsorption Property of Glutathione Magnetic Molecularly Imprinted Polymers.
Acta Chimica Sinica, 72, (5), 577-582, (2014)
   

Ma YX et al., Luminescent molecularly-imprinted polymer nanocomposites for sensitive detection.
TrAC Trends in Analytical Chemistry, 67, 209-216, (2015)
   

Hu X et al., Thermosensitive molecular imprinted polymer monolith for the selective recognition of quercetin.
Separation Science and Technology, 54, (5), 696-704, (2019)
   

Ma YY

Tu XY et al., Molecularly Imprinted Polymer-Based Plasmonic Immunosandwich Assay for Fast and Ultrasensitive Determination of Trace Glycoproteins in Complex Samples.
Analytical Chemistry, 88, (24), 12363-12370, (2016)
   

Wang SS et al., Pattern Recognition of Cells via Multiplexed Imaging with Monosaccharide-Imprinted Quantum Dots.
Analytical Chemistry, 89, (10), 5646-5652, (2017)
   

Yin DY et al., Targeted cancer imaging and photothermal therapy via monosaccharide-imprinted gold nanorods.
Chemical Communications, 53, (50), 6716-6719, (2017)
   

Bie ZJ et al., Precision Imprinting of Glycopeptides for Facile Preparation of Glycan-Specific Artificial Antibodies.
Analytical Chemistry, 90, (16), 9845-9852, (2018)
   

Ma YY et al., Glycan-Imprinted Magnetic Nanoparticle-Based SELEX for Efficient Screening of Glycoprotein-Binding Aptamers.
ACS Applied Materials & Interfaces, 10, (47), 40918-40926, (2018)
   

Li W et al., Controllably Prepared Aptamer-Molecularly Imprinted Polymer Hybrid for High-Specificity and High-Affinity Recognition of Target Proteins.
Analytical Chemistry, 91, (7), 4831-4837, (2019)
   

Li W et al., Efficient Screening of Glycan-Specific Aptamers Using a Glycosylated Peptide as a Scaffold.
Analytical Chemistry, 93, (2), 956-963, (2021)
   

Ma YZ

Ma YZ et al., Synthesis Progress in Molecular Imprinted Polymer.
Journal of Hebei Institute of Technology, 30, (4), 96-99, (2008)
   

Ma YZ et al., Advance in Extraction and Separation of Chinese Medicine Active Ingredients.
Journal of Hebei Institute of Technology, 31, (1), 99-101, (2009)
   

Ma Z

Mi ZY et al., Proceeding, Recognition of Papain by Konjac Glucomannan-Based Molecularly Imprinted Membrane, 
Zhang H, Jin D (Eds.), 687-690, (2011)
   

Mi ZY et al., Proceeding, Preparation and Characterize of Konjac Glucomannan-Based Protein Molecularly Imprinted Polymer, 
Zhang H, Jin D (Eds.), 460-463, (2012)
   

Ma ZB

Jia C et al., Preparation of Dual-Template Epitope Imprinted Polymers for Targeted Fluorescence Imaging and Targeted Drug Delivery to Pancreatic Cancer BxPC-3 Cells.
ACS Applied Materials & Interfaces, 11, (35), 32431-32440, (2019)
   

Ma ZF

Lu ZY et al., Preparation and performance of a novel magnetic conductive imprinted photocatalyst for selective photodegradation of antibiotic solution.
RSC Advances, 3, (40), 18373-18382, (2013)
   

Lu ZY et al., Microwave synthesis of a novel magnetic imprinted TiO2 photocatalyst with excellent transparency for selective photodegradation of enrofloxacin hydrochloride residues solution.
Chemical Engineering Journal, 249, 15-26, (2014)
   

Chen TT et al., Imprinted ZnO/Magnetic Fly-Ash Photocatalyst Selectively Photodegraded Danofloxacin Mesylate Solution.
Nanoscience and Nanotechnology Letters, 7, (5), 441-445, (2015)
   

Lu ZY et al., Selective photodegradation of 2-mercaptobenzothiazole by a novel imprinted CoFe2O4/MWCNTs photocatalyst.
RSC Advances, 5, (59), 47820-47829, (2015)
   

Lu ZY et al., Specific oriented recognition of a new stable ICTX@Mfa with retrievability for selective photocatalytic degrading of ciprofloxacin.
Catalysis Science & Technology, 6, (5), 1367-1377, (2016)
   

Lu ZY et al., A novel hollow capsule-like recyclable functional ZnO/C/Fe3O4 endowed with three-dimensional oriented recognition ability for selectively photodegrading danofloxacin mesylate.
Catalysis Science & Technology, 6, (17), 6513-6524, (2016)
   

Lu ZY et al., Construction of stable core-shell imprinted Ag-(poly-o-phenylenediamine)/CoFe2O4 photocatalyst endowed with the specific recognition capability for selective photodegradation of ciprofloxacin.
RSC Advances, 7, (77), 48894-48903, (2017)
   

Lu ZY et al., Facile microwave synthesis of a Z-scheme imprinted ZnFe2O4/Ag/PEDOT with the specific recognition ability towards improving photocatalytic activity and selectivity for tetracycline.
Chemical Engineering Journal, 337, 228-241, (2018)
   

Peng JY et al., Enhanced selectivity for photodegrading ciprofloxacin by a magnetic photocatalyst modified with a POPD-CdS heterojunction embedded imprinted layer.
New Journal of Chemistry, 43, (6), 2610-2623, (2019)
   

Xing WD et al., Novel Molecular Organic Framework Composite Molecularly Imprinted Nanofibrous Membranes with a Bioinspired Viscid Bead Structure for Selective Recognition and Separation of Atrazine.
ACS Applied Materials & Interfaces, 13, (24), 28749-28763, (2021)
   

Xing WD et al., Metal-organic framework based molecularly imprinted nanofiber membranes with enhanced selective recognition and separation performance: A multiple strengthening system.
Separation and Purification Technology, 278, Article119624-(2022)
   

Yu C et al., Tailor-made double-face imprinted membrane with ultra-high specific surface area asymmetric structure through a connective method of dip-coating and delayed phase inversion for selective adsorption of cadmium ion.
Separation and Purification Technology, 280, Article119865-(2022)
   

Ma ZH

Zhao L et al., Proceeding, MISPE Combined with GCMS for Analysis of Organophosphorus Pesticides from Environmental Water Sample, 
Cao Z, Cao XQ, Sun LX, He YH (Eds.), 3216-3220, (2011)
   

Ma ZK

Tang XS et al., Preparation and evaluation of polydopamine imprinting layer coated multi-walled carbon nanotubes for the determination of testosterone in prostate cancer LNcap cells.
Analytical Methods, 7, (19), 8326-8334, (2015)
   

Ma ZR

Zhang YQ et al., Synthesis of silica adsorbent and its selective separation for flavone.
Journal of Tianjin University Science and Technology, 40, (4), 411-415, (2007)
   

Zhang YQ et al., Synthesis of silica adsorbent and its selective separation for flavone (Translated from: Journal of Tianjin University, 2007, 40(4): 411-415).
Frontiers of Chemistry in China, 3, (3), 320-324, (2008)
   

Ma ZY

Yuan YA et al., Ionic liquid-molecularly imprinted polymers for pipette tip solid-phase extraction of (Z)-3-(chloromethylene)-6-flourothiochroman-4-one in urine.
Journal of Chromatography A, 1408, 49-55, (2015)
   

Maalouly J

Bitar M et al., Experimental design approach in the synthesis of molecularly imprinted polymers specific for iprodione fungicide.
Reactive and Functional Polymers, 94, 17-24, (2015)
   

Bitar M et al., Water sorption isotherms of molecularly imprinted polymers. Relation between water binding and iprodione binding capacity.
Reactive and Functional Polymers, 114, 1-7, (2017)
   

Maamor NA

Yusof NA et al., Preparation and Characterization of Molecular Imprinted Polymer for Melamine Based on Methacrylamide and 9-Vinylcarbazole as Complexing Monomer.
Asian Journal of Chemistry, 26, (8), 2285-2288, (2014)
   

Maamor NAM

Yusof NA et al., Synthesis and Characterization of Molecularly Imprinted Polymer Membrane for the Removal of 2, 4-Dinitrophenol.
International Journal of Molecular Sciences, 14, (2), 3993-4004, (2013)
   

Yze LH et al., Fabrication and Characterization of Molecularly Imprinted Polymer for Hg(II) Ion.
Asian Journal of Chemistry, 26, (16), 5029-5032, (2014)
   

Mabilangan AI

Hubilla FAD et al., Proceeding, A Surface Plasmon Resonance Histamine Sensor Based on an Electropolymerized Molecularly Imprinted Polymer (E-MIP), 
ArticleNo02006, (2017)
   

MacDonald MP

Cecchini A et al., In Vivo Recognition of Human Vascular Endothelial Growth Factor by Molecularly Imprinted Polymers.
Nano Letters, 17, (4), 2307-2312, (2017)
   

Macaskill A

Zourob M et al., A micro-reactor for preparing uniform molecularly imprinted polymer beads.
Lab on a Chip, 6, (2), 296-301, (2006)
   

Machado BS

Almeida JMS et al., Determination of gentamicin sulfate by batch-injection amperometry after solid-phase extraction using a kanamycin-template imprinted polymer.
Microchemical Journal, 145, 187-195, (2019)
   

Machado C

Kadhirvel P et al., Molecular imprinting in hydrogels using reversible addition-fragmentation chain transfer polymerization and continuous flow micro-reactor.
Journal of Chemical Technology & Biotechnology, 90, (9), 1552-1564, (2015)
   

Machado FBC

Moura SL et al., Theoretical and experimental study for the biomimetic recognition of levothyroxine hormone on magnetic molecularly imprinted polymer.
Biosensors and Bioelectronics, 107, 203-210, (2018)
   

Machado S

Pacheco JG et al., Molecularly imprinted electrochemical sensor for ochratoxin A detection in food samples.
Sensors and Actuators B: Chemical, 215, 107-112, (2015)
   

Machan T

Chaipuang A et al., Synthesis of copper(II) ion-imprinted polymers via suspension polymerization.
Polymers for Advanced Technologies, 29, (12), 3134-3141, (2018)
   

Phungpanya C et al., Synthesis of prednisolone molecularly imprinted polymer nanoparticles by precipitation polymerization.
Polymers for Advanced Technologies, 29, (12), 3075-3084, (2018)
   

Macharia J

Bhakta S et al., Albumin removal from human serum using surface nanopockets on silica-coated magnetic nanoparticles.
Chemical Communications, 53, (66), 9254-9257, (2017)
   

Machicote RG

Machicote RG et al., A molecular imprinted polymer as a flow-through optical sensor for oxazepam.
Journal of Analytical Methods in Chemistry, ArticleNo6302609-(2018)
   

Machtejevas E

Machtejevas E et al., Screening of oxazepine indole enantiomers by means of high performance liquid chromatography with imprinted polymer stationary phase.
Journal of Separation Science, 27, (7-8), 547-551, (2004)
   

Machynakova A

Machynakova A et al., The Possibilities of Preparation of Molecularly Imprinted Polymers.
Chemicke Listy, 110, (9), 609-615, (2016)
   

Machynakova A et al., Preparation and application of magnetic molecularly imprinted polymers for the selective extraction of coumarins from food and plant samples.
Analytical Methods, 9, (14), 2168-2176, (2017)
   

Machynáková A

Machynáková A et al., Synthesis and Evaluation of Molecularly Imprinted Polymers as Sorbents for Selective Extraction of Coumarins.
Chromatographia, 80, (7), 1015-1024, (2017)
   

Machynáková A et al., On-line coupling of molecularly imprinted solid phase extraction with liquid chromatography for the fast determination of coumarins from complex samples.
Journal of Pharmaceutical and Biomedical Analysis, 145, 144-150, (2017)
   

Hrobonová K et al., Determination of dicoumarol in Melilotus officinalis L. by using molecularly imprinted polymer solid-phase extraction coupled with high performance liquid chromatography.
Journal of Chromatography A, 1539, 93-102, (2018)
   

Lhotská I et al., Preparation of citrinin-selective molecularly imprinted polymer and its use for on-line solid-phase extraction coupled to liquid chromatography.
Analytical and Bioanalytical Chemistry, 411, (11), 2395-2404, (2019)
   

Maciejewska D

Lulinski P et al., Proceeding, Preliminary Evaluation of Molecularly Imprinted Polymer Synthesized with Dopamine Hydrochloride as a Template, 
Art. B001, (2005)
   

Lulinski P et al., Dopamine-imprinted polymers: Template-monomer interactions, analysis of template removal and application to solid phase extraction.
Molecules, 12, (11), 2434-2449, (2007)
   

Lulinski P et al., Examination of Imprinting Process with Molsidomine as a Template.
Molecules, 14, (6), 2212-2225, (2009)
   

Dana M et al., Synthesis of Homoveratric Acid-Imprinted Polymers and Their Evaluation as Selective Separation Materials.
Molecules, 16, (5), 3826-3844, (2011)
   

Lulinski P et al., Investigations of molecularly imprinted polymers for medical diagnostics and clinical analysis.
Polimery w Medycynie, 41, (1), 3-15, (2011)
   

Lulinski P et al., Impact of functional monomers, cross-linkers and porogens on morphology and recognition properties of 2-(3, 4-dimethoxyphenyl)ethylamine imprinted polymers.
Materials Science and Engineering: C, 31, (2), 281-289, (2011)
   

Zolek T et al., A computational model for selectivity evaluation of 2-(3, 4-dimethoxyphenyl)ethylamine (homoveratrylamine) imprinted polymers towards biogenic compounds.
Analytica Chimica Acta, 693, (1-2), 121-129, (2011)
   

Lulinski P et al., Synthesis and characterization of 3, 4-dihydroxyphenylacetic acid imprinted polymers.
Polymer International, 61, (4), 631-638, (2012)
   

Lulinski P et al., Effective separation of dopamine from bananas on 2-(3, 4-dimethoxyphenyl)ethylamine imprinted polymer.
Journal of Separation Science, 35, (8), 1050-1057, (2012)
   

Lulinski P et al., Effect of functional monomers and porogens on morphology, structure and recognition properties of 2-(4-methoxyphenyl)ethylamine imprinted polymers.
Materials Science and Engineering: C, 33, (3), 1162-1169, (2013)
   

Lulinski P et al., Synthesis and characterization of 4-(2-aminoethyl)aniline imprinted polymer as a highly effective sorbent of dopamine.
Talanta, 119, 623-631, (2014)
   

Lulinski P et al., Synthesis and characterization of cadmium(II)-imprinted poly(1-allyl-2-thiourea-co-ethylene glycol dimethacrylate) particles for selective separation.
Polymer Bulletin, 71, (7), 1727-1741, (2014)
   

Lulinski P et al., A separation of tyramine on a 2-(4-methoxyphenyl)ethylamine imprinted polymer: An answer from theoretical and experimental studies.
Talanta, 129, 155-164, (2014)
   

Lulinski P et al., 3, 3'-Diindolylmethane imprinted polymers: synthesis, characterization and analytical procedure for template isolation from biological matrix.
Polymer International, 63, (4), 695-702, (2014)
   

Sobiech M et al., A computational exploration of imprinted polymer affinity based on voriconazole metabolites.
Analyst, 139, (7), 1779-1788, (2014)
   

Klejn D et al., Desorption of 3, 3'-diindolylmethane from imprinted particles: An impact of cross-linker structure on binding capacity and selectivity.
Materials Science and Engineering: C, 56, 233-240, (2015)
   

Lulinski P et al., A highly selective molecularly imprinted sorbent for extraction of 2-aminothiazoline-4-carboxylic acid - Synthesis, characterization and application in post-mortem whole blood analysis.
Journal of Chromatography A, 1420, 16-25, (2015)
   

Klejn D et al., Molecularly imprinted solid phase extraction in an efficient analytical protocol for indole-3-methanol determination in artificial gastric juice.
RSC Advances, 6, (110), 108801-108809, (2016)
   

Lulinski P et al., Synthesis and characterization of imprinted sorbent for separation of gramine from bovine serum albumin.
Materials Science and Engineering: C, 65, 400-407, (2016)
   

Lulinski P et al., Efficient strategy for the selective determination of dopamine in human urine by molecularly imprinted solid-phase extraction.
Journal of Separation Science, 39, (5), 895-903, (2016)
   

Sobiech M et al., Separation of octopamine racemate on (R, S)-2-amino-1-phenylethanol imprinted polymer - Experimental and computational studies.
Talanta, 146, 556-567, (2016)
   

Lulinski P et al., Development of a validated strategy for the determination of tryptamine in human cerebrospinal fluid in the presence of competitors using molecularly imprinted polymers.
Journal of Separation Science, 40, (8), 1824-1833, (2017)
   

Sobiech M et al., The selective response of a templated polymer for the cationic drug pentamidine: implications from molecular simulations and experimental data.
RSC Advances, 7, (74), 46881-46893, (2017)
   

Maciejewska D et al., Book chapter, Molecularly Imprinted Polymer-based Materials for Quantifying Pharmaceuticals, 
In: Molecularly Imprinted Polymers for Analytical Chemistry Applications, Kutner W, Sharma PS (Eds.) Royal Society of Chemistry: Ch. 5, 145-166, (2018)
   

Gajda M et al., Low-oxidation-potential thiophene-carbazole monomers for electro-oxidative molecular imprinting: Selective chemosensing of aripiprazole.
Biosensors and Bioelectronics, 169, Article112589-(2020)
   

Jyoti et al., Molecularly imprinted polymer nanoparticles-based electrochemical chemosensors for selective determination of cilostazol and its pharmacologically active primary metabolite in human plasma.
Biosensors and Bioelectronics, 193, Article113542-(2021)
   

Macindoe WM

Macindoe WM et al., Some studies on the selective synthesis of sucrose acetates using template and random trityl chloride functionalised macroporous polymers.
Carbohydrate Research, 289, (1), 151-161, (1996)
   

Macip S

Ekpenyong-Akiba AE et al., Detecting and targeting senescent cells using molecularly imprinted nanoparticles.
Nanoscale Horizons, 4, (3), 757-768, (2019)
   

Piletsky SS et al., Snapshot imprinting: rapid identification of cancer cell surface proteins and epitopes using molecularly imprinted polymers.
Nano Today, 41, Article101304-(2021)
   

Maciuk A

Maciuk A et al., Screening of tobacco smoke condensate for nicotinic acetylcholine receptor ligands using cellular membrane affinity chromatography columns and missing peak chromatography.
Journal of Pharmaceutical and Biomedical Analysis, 48, (2), 238-246, (2008)
   

Maciá B

Hudson AD et al., Synthesis of Optimized Molecularly Imprinted Polymers for the Isolation and Detection of Antidepressants via HPLC.
Biomimetics, 4, (1), ArticleNo18-(2019)
   

Macka M

Kulsing C et al., Molecular imprinted polymeric porous layers in open tubular capillaries for chiral separations.
Journal of Chromatography A, 1354, 85-91, (2014)
   

Rypar T et al., Paperfluidic devices with a selective molecularly imprinted polymer surface for instrumentation-free distance-based detection of protein biomarkers.
Sensors and Actuators B: Chemical, 341, Article129999-(2021)
   

Bezdekova J et al., Book chapter, From Natural to Artificial Biorecognition Elements: From Antibodies to Molecularly Imprinted Polymers, 
In: BioSensing, Theranostics, and Medical Devices: From Laboratory to Point-of-Care Testing, Borse V, Chandra P, Srivastava R (Eds.) Springer Singapore: Singapore, 185-206, (2022)
   

Madadi VO

Ndunda EN et al., An alternative clean-up column for the determination of polychlorinated biphenyls in solid matrices.
Environmental Science: Processes & Impacts, 17, (12), 2101-2109, (2015)
   

Madadian-Bozorg N

Madadian-Bozorg N et al., Poly (methacrylic acid)-based molecularly imprinted polymer nanoparticles containing 5-fluourouracil used in colon cancer therapy potentially.
Polymers for Advanced Technologies, 29, (8), 2401-2409, (2018)
   

Madaeni SS

Vatanpour V et al., Development of ion imprinted technique for designing nickel ion selective membrane.
Journal of Membrane Science, 373, (1-2), 36-42, (2011)
   

Salehi E et al., Thermodynamic investigation and mathematical modeling of ion-imprinted membrane adsorption.
Journal of Membrane Science, 389, (1), 334-342, (2012)
   

Madanchi H

Hashemi-Moghaddam H et al., Evaluation of molecularly imprinted polymer based on HER2 epitope for targeted drug delivery in ovarian cancer mouse model.
Reactive and Functional Polymers, 121, 82-90, (2017)
   

Madani A

Gam-Derouich S et al., Aryl diazonium salt surface chemistry and ATRP for the preparation of molecularly imprinted polymer grafts on gold substrates.
Surface And Interface Analysis, 42, (6-7), 1050-1056, (2010)
   

Madani M

Hamidi N et al., A Novel Potentiometric Ni2+-Sensor based on a Ni2+ Ion-Imprinted Polymer.
Analytical & Bioanalytical Electrochemistry, 10, (2), 281-291, (2018)
   

Madathil D

Prachi et al., Nanotechnology in Waste Water Treatment: A Review.
International Journal of ChemTech Research, 5, (5), 2303-2308, (2013)
   

Madbouly A

El Gohary NA et al., Synthesis and application of a molecularly imprinted polymer for the voltammetric determination of famciclovir.
Biosensors and Bioelectronics, 65, 108-114, (2015)
   

Saad EM et al., Preparation and application of molecularly imprinted polymer for isolation of chicoric acid from Chicorium intybus L. medicinal plant.
Analytica Chimica Acta, 877, 80-89, (2015)
   

Abdel-Haleem FM et al., Molecularly imprinted polymer-based bulk optode for the determination of itopride hydrochloride in physiological fluids.
Biosensors and Bioelectronics, 85, 740-742, (2016)
   

Abdel Ghani NT et al., Computational Design, Synthesis and Application of a New Selective Molecularly Imprinted Polymer for Electrochemical Detection.
Electroanalysis, 28, (7), 1530-1538, (2016)
   

El Gohary NA et al., Voltammetric Determination of Valaciclovir Using a Molecularly Imprinted Polymer Modified Carbon Paste Electrode.
Electroanalysis, 29, (5), 1388-1399, (2017)
   

El Nashar RM et al., Molecularly imprinted polymers based biomimetic sensors for mosapride citrate detection in biological fluids.
Materials Science and Engineering: C, 76, 123-129, (2017)
   

Hammam MA et al., Computational design of molecularly imprinted polymer for solid phase extraction of moxifloxacin hydrochloride from Avalox® tablets and spiked human urine samples.
Microchemical Journal, 148, 51-56, (2019)
   

Madden LA

Borovicka J et al., Photothermal Colloid Antibodies for Shape-Selective Recognition and Killing of Microorganisms.
Journal of the American Chemical Society, 135, (14), 5282-5285, (2013)
   

Medlock J et al., Cancer bioimprinting and cell shape recognition for diagnosis and targeted treatment.
Chemical Society Reviews, 46, (16), 5110-5127, (2017)
   

Das AAK et al., Bioimprint aided cell recognition and depletion of human leukemic HL60 cells from peripheral blood.
Journal of Materials Chemistry B, 7, (22), 3497-3504, (2019)
   

Maddock SC

Maddock SC et al., Novel imprinted soluble microgels with hydrolytic catalytic activity.
Chemical Communications, (5), 536-537, (2004)
   

Pasetto P et al., Synthesis and characterisation of molecularly imprinted catalytic microgels for carbonate hydrolysis.
Analytica Chimica Acta, 542, (1), 66-75, (2005)
   

Madhumanchi S

Madhumanchi S et al., Efficient adsorptive extraction materials by surface protein-imprinted polymer over silica gel for selective recognition/separation of human serum albumin from urine.
Journal of Applied Polymer Science, 136, (1), Article46894-(2018)
   

Jadda R et al., Novel adsorptive materials by adenosine 5'-triphosphate imprinted-polymer over the surface of polystyrene nanospheres for selective separation of adenosine 5'-triphosphate biomarker from urine.
Journal of Separation Science, 42, (24), 3662-3678, (2019)
   

Madhuri R

Prasad BB et al., Imprinting molecular recognition sites on multiwalled carbon nanotubes surface for electrochemical detection of insulin in real samples.
Electrochimica Acta, 55, (28), 9146-9156, (2010)
   

Prasad BB et al., Enantioselective quantitative separation of d- and l-thyroxine by molecularly imprinted micro-solid phase extraction silver fiber coupled with complementary molecularly imprinted polymer-sensor.
Journal of Chromatography A, 1217, (26), 4255-4266, (2010)
   

Prasad BB et al., Imprinted polymer-carbon consolidated composite fiber sensor for substrate-selective electrochemical sensing of folic acid.
Biosensors and Bioelectronics, 25, (9), 2140-2148, (2010)
   

Prasad BB et al., Development of a highly sensitive and selective hyphenated technique (molecularly imprinted micro-solid phase extraction fiber-molecularly imprinted polymer fiber sensor) for ultratrace analysis of folic acid.
Analytica Chimica Acta, 662, (1), 14-22, (2010)
   

Prasad BB et al., Layer-by-layer assembled molecularly imprinted polymer modified silver electrode for enantioselective detection of d- and l-thyroxine.
Analytica Chimica Acta, 681, (1-2), 16-26, (2010)
   

Prasad BB et al., Electrochemical sensor for folic acid based on a hyperbranched molecularly imprinted polymer-immobilized sol-gel-modified pencil graphite electrode.
Sensors and Actuators B: Chemical, 146, (1), 321-330, (2010)
   

Prasad BB et al., Enantioselective recognition of d- and l-tryptophan by imprinted polymer-carbon composite fiber sensor.
Talanta, 81, (1-2), 187-196, (2010)
   

Kumar D et al., Molecularly imprinted polymer-modified electrochemical sensor for simultaneous determination of copper and zinc.
Advanced Materials Letters, 2, (4), 294-297, (2011)
   

Madhuri R et al., Biomimetic piezoelectric quartz sensor for folic acid based on a molecular imprinting technology.
Advanced Materials Letters, 2, (4), 264-267, (2011)
   

Prasad BB et al., Ascorbic acid imprinted polymer-modified graphite electrode: A diagnostic sensor for hypovitaminosis C at ultra trace ascorbic acid level.
Sensors and Actuators B: Chemical, 160, (1), 418-427, (2011)
   

Prasad BB et al., Enantioselective separation and electrochemical sensing of d- and l-tryptophan at ultratrace level using molecularly imprinted micro-solid phase extraction fiber coupled with complementary molecularly imprinted polymer-fiber sensor.
Journal of Chromatography B, 879, (5-6), 364-370, (2011)
   

Prasad BB et al., Sol-gel derived multiwalled carbon nanotubes ceramic electrode modified with molecularly imprinted polymer for ultra trace sensing of dopamine in real samples.
Electrochimica Acta, 56, (20), 7202-7211, (2011)
   

Prasad BB et al., Metal ion mediated imprinting for electrochemical enantioselective sensing of l-histidine at trace level.
Biosensors and Bioelectronics, 28, (1), 117-126, (2011)
   

Tiwari MP et al., Double imprinting in a single molecularly imprinted polymer format for the determination of ascorbic acid and dopamine.
Advanced Materials Letters, 2, (4), 276-280, (2011)
   

Prasad BB et al., Nonhydrolytic sol-gel derived imprinted polymer-multiwalled carbon nanotubes composite fiber sensors for electrochemical sensing of uracil and 5-fluorouracil.
Electrochimica Acta, 71, (1), 106-115, (2012)
   

Prasad BB et al., Multiwalled carbon nanotubes bearing 'terminal monomeric unit' for the fabrication of epinephrine imprinted polymer-based electrochemical sensor.
Biosensors and Bioelectronics, 45, 114-122, (2013)
   

Madhuri R et al., Book chapter, Combination of Molecular Imprinting and Nanotechnology: Beginning of a New Horizon, 
In: Advanced Biomaterials and Biodevices, Tiwari A, Nordin AN (Eds.) Wiley: Hoboken, Ch. 11, 367-422, (2014)
   

Madhuri R et al., Book chapter, Combination of Molecular Imprinting and Nanotechnology: Beginning of a New Horizon, 
In: Biosensors Nanotechnology, Tiwari A, Turner APF (Eds.) Wiley: Hoboken, Ch. 12, 375-432, (2014)
   

Roy E et al., Simultaneous determination of heavy metals in biological samples by a multiple-template imprinting technique: an electrochemical study.
RSC Advances, 4, (100), 56690-56700, (2014)
   

Roy E et al., Gold nanoparticle mediated designing of non-hydrolytic sol-gel cross-linked metformin imprinted polymer network: A theoretical and experimental study.
Talanta, 120, 198-207, (2014)
   

Roy E et al., A metronidazole-probe sensor based on imprinted biocompatible nanofilm for rapid and sensitive detection of anaerobic protozoan.
RSC Advances, 4, (62), 32881-32893, (2014)
   

Patra S et al., Bimetallic magnetic nanoparticle as a new platform for fabrication of pyridoxine and pyridoxal-5'-phosphate imprinted polymer modified high throughput electrochemical sensor [RETRACTED].
Biosensors and Bioelectronics, 73, 234-244, (2015)
   

Patra S et al., Fast and Selective Preconcentration of Europium from Wastewater and Coal Soil by Graphene Oxide/Silane@Fe3O4 Dendritic Nanostructure.
Environmental Science & Technology, 49, (10), 6117-6126, (2015)
   

Patra S et al., RETRACTED Imprinted ZnO nanostructure-based electrochemical sensing of calcitonin: A clinical marker for medullary thyroid carcinoma.
Analytica Chimica Acta, 853, 271-284, (2015)
   

Patra S et al., Nano-iniferter based imprinted sensor for ultra trace level detection of prostate-specific antigen in both men and women.
Biosensors and Bioelectronics, 66, 1-10, (2015)
   

Patra S et al., An imprinted Ag@CdS core shell nanoparticle based optical-electrochemical dual probe for trace level recognition of ferritin.
Biosensors and Bioelectronics, 63, 301-310, (2015)
   

Patra S et al., RETRACTED: Bimetallic magnetic nanoparticle as a new platform for fabrication of pyridoxine and pyridoxal-5'-phosphate imprinted polymer modified high throughput electrochemical sensor.
Biosensors and Bioelectronics, 73, 234-244, (2015)
   

Roy E et al., Developing electrochemical sensor for point-of-care diagnostics of oxidative stress marker using imprinted bimetallic Fe/Pd nanoparticle.
Talanta, 132, 406-415, (2015)
   

Roy E et al., Development of an imprinted polymeric sensor with dual sensing property for trace level estimation of zinc and arginine.
Materials Science and Engineering: C, 49, 25-33, (2015)
   

Karfa P et al., RETRACTED A fluorescent molecularly-imprinted polymer gate with temperature and pH as inputs for detection of alpha-fetoprotein.
Biosensors and Bioelectronics, 78, 454-463, (2016)
   

Karfa P et al., RETRACTED - A battle between spherical and cube-shaped Ag/AgCl nanoparticle modified imprinted polymer to achieve femtogram detection of alpha-feto protein.
Journal of Materials Chemistry B, 4, (33), 5534-5547, (2016)
   

Kumar S et al., Molecularly imprinted star polymer-modified superparamagnetic iron oxide nanoparticle for trace level sensing and separation of mancozeb.
RSC Advances, 6, (43), 36751-36760, (2016)
   

Patra S et al., Nanocomposite of bimetallic nanodendrite and reduced graphene oxide as a novel platform for molecular imprinting technology.
Analytica Chimica Acta, 918, 77-88, (2016)
   

Patra S et al., RETRACTED Size-specific imprinted polymer embedded carbon nanodots modified magnetic nanoparticle for specific recognition of titanium nanoparticle: The round versus round.
Biosensors and Bioelectronics, 86, 818-826, (2016)
   

Roy E et al., A single solution for arsenite and arsenate removal from drinking water using cysteine@ZnS:TiO2 nanoparticle modified molecularly imprinted biofouling-resistant filtration membrane.
Chemical Engineering Journal, 304, 259-270, (2016)
   

Karfa P et al., Development of carbon dots modified fluorescent molecular imprinted Polymer@Ag/AgCl nanoparticle for hepatocellular carcinoma marker.
AIP Conference Proceedings, 1832, (1), ArticleNo050008-(2017)
   

Kumar S et al., Super paramagnetic iron oxide nanoparticle modified mancozeb imprinted polymer.
AIP Conference Proceedings, 1832, (1), ArticleNo050014-(2017)
   

Patra S et al., Triple signalling mode carbon dots-based biodegradable molecularly imprinted polymer as a multi-tasking visual sensor for rapid and "on-site" monitoring of silver ions.
Journal of Materials Chemistry C, 5, (45), 11965-11976, (2017)
   

Patra S et al., RETRACTED Graphene quantum dots decorated CdS doped graphene oxide sheets in dual action mode: As initiator and platform for designing of nimesulide imprinted polymer (Retracted).
Biosensors and Bioelectronics, 89, 627-635, (2017)
   

Patra S et al., RETRACTED Removal and Recycling of Precious Rare Earth Element from Wastewater Samples Using Imprinted Magnetic Ordered Mesoporous Carbon.
ACS Sustainable Chemistry & Engineering, 5, (8), 6910-6923, (2017)
   

Patra S et al., Anisotropic (spherical/hexagon/cube) silver nanoparticle embedded magnetic carbon nanosphere as platform for designing of tramadol imprinted polymer.
Biosensors and Bioelectronics, 97, 208-217, (2017)
   

Patra S et al., Imprinted magnetic graphene oxide for the mini-solid phase extraction of Eu (III) from coal mine area.
AIP Conference Proceedings, 1832, (1), ArticleNo050009-(2017)
   

Roy E et al., RETRACTED Single cell imprinting on the surface of Ag-ZnO bimetallic nanoparticle modified graphene oxide sheets for targeted detection, removal and photothermal killing of E. Coli (Retracted).
Biosensors and Bioelectronics, 89, (Part 1), 620-626, (2017)
   

Roy E et al., Introduction of selectivity and specificity to graphene using an inimitable combination of molecular imprinting and nanotechnology.
Biosensors and Bioelectronics, 89, (Part 1), 234-248, (2017)
   

Roy E et al., Shape effect on the fabrication of imprinted nanoparticles: Comparison between spherical-, rod-, hexagonal-, and flower-shaped nanoparticles.
Chemical Engineering Journal, 321, 195-206, (2017)
   

Kumar S et al., Designing of fluorescent and magnetic imprinted polymer for rapid, selective and sensitive detection of imidacloprid via activators regenerated by the electron transfer-atom transfer radical polymerization (ARGET-ATRP) technique.
Journal of Physics and Chemistry of Solids, 116, 222-233, (2018)
   

Patra S et al., Retraction notice to "Graphene quantum dots decorated CdS doped graphene oxide sheets in dual action mode: as initiator and platform for designing of nimesulide imprinted polymer " [BIOS 89P1 (2017) 627-635].
Biosensors and Bioelectronics, 114, 89-(2018)
   

Patra S et al., Retracted: Imprinted ZnO nanostructure-based electrochemical sensing of calcitonin: A clinical marker for medullary thyroid carcinoma.
Analytica Chimica Acta, 1023, 121-121, (2018)
   

Patra S et al., Retraction of "Removal and Recycling of Precious Rare Earth Element from Wastewater Samples Using Imprinted Magnetic Ordered Mesoporous Carbon".
ACS Sustainable Chemistry & Engineering, 6, (7), 9520-9520, (2018)
   

Roy E et al., Retraction notice to Single cell imprinting on the surface of Ag-ZnO bimetallic nanoparticle modified graphene oxide sheets for targeted detection, removal and photothermal killing of E. Coli Biosensors and Bioelectronics Volume 89, Part 1, 15 March 2017, Pages 620-626.
Biosensors and Bioelectronics, 112, 216-(2018)
   

Karfa P et al., Retraction to "A Fluorescent molecularly-imprinted polymer gate with temperature and pH as inputs for detection of alpha-fetoprotein", [Biosensors and Bioelectronics, 78 (2016) 454-463].
Biosensors and Bioelectronics, 124-125, 268-268, (2019)
   

Patra S et al., Retraction notice to "Size-specific imprinted polymer embedded carbon nanodots modified magnetic nanoparticle for specific recognition of titanium nanoparticle: The round versus round", [Biosensors and Bioelectronics, 86 (2016) 818-826].
Biosensors and Bioelectronics, 124-125, 269-(2019)
   

Madhusudhan A

Hailemariam T et al., Current Trends and Recent Development in Sample Preparation Techniques for Environmental Matrices: A Critical Overview.
Research Journal of Chemical and Environmental Sciences, 4, (1), 11-27, (2016)
   

Hialemariam T et al., Recent Advances in Sample Preparation Techniques Using SFE; MAE & MIP In Environmental Matrice: A Critical Overview.
Research Journal of Chemical and Environmental Sciences, 4, (1), 11-27, (2016)
   

Madic C

Garcia R et al., Ionic imprinting effect in gadolinium/lanthanum separation.
Tetrahedron Letters, 39, (47), 8651-8654, (1998)
   

Madikizela L

Madikizela L et al., Book chapter, Molecularly Imprinted Polymers for Pharmaceutical Compounds: Synthetic Procedures and Analytical Applications, 
In: Recent Research in Polymerization, Cancaya N (Ed.) InTechOpen: Ch. 3, 47-67, (2018)
   

Ncube S et al., Recent advances in the adsorbents for isolation of polycyclic aromatic hydrocarbons (PAHs) from environmental sample solutions.
TrAC Trends in Analytical Chemistry, 99, 101-116, (2018)
   

Madikizela LM

Madikizela LM et al., Experimental and theoretical study of molecular interactions between 2-vinyl pyridine and acidic pharmaceuticals used as multi-template molecules in molecularly imprinted polymer.
Reactive and Functional Polymers, 103, 33-43, (2016)
   

Madikizela LM et al., Determination of ibuprofen, naproxen and diclofenac in aqueous samples using a multi-template molecularly imprinted polymer as selective adsorbent for solid-phase extraction.
Journal of Pharmaceutical and Biomedical Analysis, 128, 210-215, (2016)
   

Madikizela LM et al., Synthesis, adsorption and selectivity studies of a polymer imprinted with naproxen, ibuprofen and diclofenac.
Journal of Environmental Chemical Engineering, 4, (Part A), 4029-4037, (2016)
   

Madikizela LM et al., Occurrence of naproxen, ibuprofen, and diclofenac residues in wastewater and river water of KwaZulu-Natal Province in South Africa.
Environmental Monitoring and Assessment, 189, (7), ArticleNo348-(2017)
   

Madikizela LM et al., An initial assessment of naproxen, ibuprofen and diclofenac in Ladysmith water resources in South Africa using molecularly imprinted solid-phase extraction followed by high performance liquid chromatography-photodiode array detection.
South African Journal of Chemistry, 70, (1), 145-153, (2017)
   

Zunngu SS et al., Synthesis and application of a molecularly imprinted polymer in the solid-phase extraction of ketoprofen from wastewater.
Comptes Rendus Chimie, 20, (5), 585-591, (2017)
   

Madikizela LM et al., Applications of molecularly imprinted polymers for solid-phase extraction of non-steroidal anti-inflammatory drugs and analgesics from environmental waters and biological samples.
Journal of Pharmaceutical and Biomedical Analysis, 147, 624-633, (2018)
   

Madikizela LM et al., Application of molecularly imprinted polymer designed for the selective extraction of ketoprofen from wastewater.
Water SA, 44, (3), 406-418, (2018)
   

Madikizela LM et al., Green aspects in molecular imprinting technology: From design to environmental applications.
Trends in Environmental Analytical Chemistry, 17, 14-22, (2018)
   

Mbhele ZE et al., Synthesis of a molecularly imprinted polymer and its application in selective extraction of fenoprofen from wastewater.
Environmental Science and Pollution Research, 25, (36), 36724-36735, (2018)
   

Madikizela LM et al., Recent Developments in Selective Materials for Solid Phase Extraction.
Chromatographia, 82, (8), 1171-1189, (2019)
   

Mtolo SP et al., Synthesis and application of a molecularly imprinted polymer in selective solid-phase extraction of efavirenz from water.
Water Science And Technology, 79, (2), 356-365, (2019)
   

Qwane SN et al., Synthesis, Characterization and Application of a Molecularly Imprinted Polymer in Selective Adsorption of Abacavir from Polluted Water.
South African Journal of Chemistry, 73, 84-91, (2020)
   

Khulu S et al., Multivariate optimization of a two-way technique for extraction of pharmaceuticals in surface water using a combination of membrane assisted solvent extraction and a molecularly imprinted polymer.
Chemosphere, 286, Article131973-(2022)
   

Madikizela LM et al., Synthesis of molecularly imprinted polymers for extraction of fluoroquinolones in environmental, food and biological samples.
Journal of Pharmaceutical and Biomedical Analysis, 208, Article114447-(2022)
   

Madrakian T

Afkhami A et al., Fabrication of a new electrochemical sensor based on a new nano-molecularly imprinted polymer for highly selective and sensitive determination of tramadol in human urine samples.
Biosensors and Bioelectronics, 44, 34-40, (2013)
   

Madrakian T et al., Selective solid-phase extraction of naproxen drug from human urine samples using molecularly imprinted polymer-coated magnetic multi-walled carbon nanotubes prior to its spectrofluorometric determination.
Analyst, 138, (16), 4542-4549, (2013)
   

Madrakian T et al., Superparamagnetic surface molecularly imprinted nanoparticles for sensitive solid-phase extraction of tramadol from urine samples.
Talanta, 105, 255-261, (2013)
   

Ahmadi M et al., Molecularly imprinted polymer coated magnetite nanoparticles as an efficient mefenamic acid resonance light scattering nanosensor.
Analytica Chimica Acta, 852, 250-256, (2014)
   

Afkhami A et al., Electrochemical Sensor for Dapsone Using Molecularly Imprinted Polypyrrole Membrane as a Recognition Element.
Journal of The Electrochemical Society, 162, (6), B109-B113, (2015)
   

Ahmadi M et al., Solid phase extraction of doxorubicin using molecularly imprinted polymer coated magnetite nanospheres prior to its spectrofluorometric determination.
New Journal of Chemistry, 39, (1), 163-171, (2015)
   

Madrakian T et al., Selective extraction and sensitive determination of mercury (II) ions by flame atomic absorption spectrometry after preconcentration on an ion-imprinted polymer-coated maghemite nanoparticles.
Journal of the Iranian Chemical Society, 12, (7), 1235-1243, (2015)
   

Madrakian T et al., Spectrofluorometric determination of venlafaxine in biological samples after selective extraction on the superparamagnetic surface molecularly imprinted nanoparticles.
Analytical Methods, 7, (2), 428-435, (2015)
   

Madrakian T et al., Solid phase extraction and spectrofluorometric determination of leached bisphenol A from some polycarbonate products under simulated use conditions using surface molecularly imprinted magnetite nanospheres.
Analytical Methods, 7, (15), 6299-6306, (2015)
   

Madrakian T et al., Construction a magneto carbon paste electrode using synthesized molecularly imprinted magnetic nanospheres for selective and sensitive determination of mefenamic acid in some real samples.
Biosensors and Bioelectronics, 68, 712-718, (2015)
   

Shirzadmehr A et al., A new nano-composite potentiometric sensor containing an Hg2+ ion imprinted polymer for the trace determination of mercury ions in different matrices.
Journal of Molecular Liquids, 204, 227-235, (2015)
   

Afkhami A et al., Selective and Sensitive Electrochemical Determination of Trace Amounts of Mercury Ion in Some Real Samples Using an Ion Imprinted Polymer Nano-Modifier.
Journal of The Electrochemical Society, 163, (3), B68-B75, (2016)
   

Madrakian T et al., Efficient solid phase extraction of codeine from human urine samples using a novel magnetic molecularly imprinted nanoadsorbent and its spectrofluorometric determination.
New Journal of Chemistry, 40, (1), 122-129, (2016)
   

Madrakian T et al., A sensitive electrochemical sensor for rapid and selective determination of venlafaxine in biological fluids using carbon paste electrode modified with molecularly imprinted polymer-coated magnetite nanoparticles.
Journal of the Iranian Chemical Society, 13, (2), 243-251, (2016)
   

Ahmadi M et al., Nanomaterials as sorbents for sample preparation in bioanalysis: A review.
Analytica Chimica Acta, 958, 1-21, (2017)
   

Afkhami A et al., Fabrication of an Electrochemical Sensor Based on a New Nano-ion Imprinted Polymer for Highly Selective and Sensitive Determination of Molybdate.
Analytical and Bioanalytical Chemistry Research, 5, (1), 41-53, (2018)
   

Soleimani M et al., Magnetic solid phase extraction of rizatriptan in human urine samples prior to its spectrofluorimetric determination.
Sensors and Actuators B: Chemical, 254, 1225-1233, (2018)
   

Pirdadeh-Beiranvand M et al., Magnetic molecularly imprinted electrospun nanofibers for selective extraction of nilotinib from human serum.
Analytical and Bioanalytical Chemistry, 412, (7), 1629-1637, (2020)
   

Taheri Z et al., Application of magnetic ion imprinted polymers for simultaneous quantification of Al3+ and Be2+ ions using the mean centering of ratio spectra method.
Talanta, 225, Article122003-(2021)
   

Madurangika Jayasinghe GDT

Madurangika Jayasinghe GDT et al., Room temperature phosphorescent determination of aflatoxins in fish feed based on molecularly imprinted polymer - Mn-doped ZnS quantum dots.
Analytica Chimica Acta, 1103, 183-191, (2020)
   

Maebayashi H

Maebayashi H et al., Proceeding, Synthesis of 4-Hydroxy-2-pyrone Derivatives and Application to Ion Imprinting Polymers, 
(2009)
   

Maeda A

Yang DH et al., Design of highly efficient receptor sites by combination of cyclodextrin units and molecular cavity in TiO2 ultrathin layer.
Biosensors and Bioelectronics, 22, (3), 388-392, (2006)
   

Yang DH et al., Enhanced sensor capability of juxtaposed b-cyclodextrin rings in TiO2 ultrathin matrix as determined by cyclic surface-polarization impedance measurement.
Sensors and Materials, 20, (4), 191-200, (2008)
   

Maeda K

Yashima E et al., Helical Polymers: Synthesis, Structures, and Functions.
Chemical Reviews, 109, (11), 6102-6211, (2009)
   

Maeda M

Kido H et al., Metal-ion complexation behavior of resins prepared by a novel template polymerization technique.
Analytical Sciences, 8, (6), 749-753, (1992)
   

Yu KY et al., Metal ion-imprinted microspheres prepared by reorganization of the coordinating groups on the surface.
Analytical Sciences, 8, (5), 701-703, (1992)
   

Kido H et al., Metal-ion complexation equilibria of ion-exchange resins prepared by a surface template polymerization.
Kobunshi Ronbunshu, 50, (5), 403-410, (1993)
   

Tsukagoshi K et al., Adsorption behavior of metal-ions onto Co(II)-imprinted microspheres prepared by surface imprinting - effect of Co(II)-imprinting.
Kobunshi Ronbunshu, 50, (5), 455-458, (1993)
   

Tsukagoshi K et al., Metal ion-selective adsorbent prepared by surface-imprinting polymerization.
Bulletin of the Chemical Society of Japan, 66, (1), 114-120, (1993)
   

Maeda M et al., Template-dependent metal adsorptivity of dialkyl phosphate-type resins prepared by surface template polymerization technique.
Analytical Sciences, 10, (1), 113-115, (1994)
   

Maeda M, Surface template polymerization - a new preparation method to molecularly imprinted resins.
Journal of Japan Oil Chemists Society, 43, (11), 921-926, (1994)
   

Tsukagoshi K et al., Preparation and sugar binding property of microspheres having surface-anchored phenylboronic acid groups.
Chemistry Letters, 23, (4), 681-684, (1994)
   

Uezu K et al., Novel metal ion-imprinted resins prepared by surface template polymerization with W/O emulsion.
Journal of Chemical Engineering of Japan, 27, (3), 436-438, (1994)
   

Murata M et al., Metal ion selectivity of surface templated resins carrying phosphate groups.
Analytical Science &Technology, 8, (4), 529-534, (1995)
   

Tsukagoshi K et al., Surface imprinting - characterization of a latex resin and the origin of the imprinting effect.
Bulletin of the Chemical Society of Japan, 68, (11), 3095-3103, (1995)
   

Fujiwara I et al., Ferrocyanide-templated resins prepared by surface template polymerization.
Analytical Sciences, 12, (4), 545-549, (1996)
   

Koide Y et al., Selective adsorption of metal ions to surface-template resins prepared by emulsion polymerization using 10-(p-vinylphenyl)decanoic acid.
Bulletin of the Chemical Society of Japan, 69, (1), 125-130, (1996)
   

Murata M et al., Template-dependent selectivity in metal adsorption on phosphoric diester-carrying resins prepared by surface template polymerization technique.
Bulletin of the Chemical Society of Japan, 69, (3), 637-642, (1996)
   

Tsukagoshi K et al., Metal-ion imprinted resin prepared using an interaction at the aqueous-organic interface and its characterization.
Bunseki Kagaku, 45, (11), 975-986, (1996)
   

Miyajima T et al., A physiochemical study on the origin of the imprinting effect.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 148-148, (1997)
   

Umeno D et al., Imprinting of proteins on polymer-modified DNA for affinity separations.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 130-130, (1997)
   

Koide Y et al., Adsorption of metal ions to surface-template resins prepared with amphiphilic styrene monomers bearing amino carboxylic acid.
Bulletin of the Chemical Society of Japan, 71, (4), 789-796, (1998)
   

Koide Y et al., Book chapter, Selective adsorption of metal ions to surface-templated resins prepared by emulsion polymerization using a functional surfactant, 
In: Molecular and Ionic Recognition with Imprinted Polymers, Bartsch RA, Maeda M (Eds.) The American Chemical Society: Washington DC, Ch. 18, 264-277, (1998)
   

Maeda M et al., Book chapter, Molecular and ionic recognition with imprinted polymers: A brief overview, 
In: Molecular and Ionic Recognition with Imprinted Polymers, Bartsch RA, Maeda M (Eds.) The American Chemical Society: Washington DC, Ch. 1, 1-8, (1998)
   

Miyajima T et al., Book chapter, A physicochemical study on the origin of the imprinting effect, 
In: Molecular and Ionic Recognition with Imprinted Polymers, Bartsch RA, Maeda M (Eds.) The American Chemical Society: Washington DC, Ch. 20, 290-297, (1998)
   

Tsukagoshi K et al., Book chapter, Surface imprinting: Preparation of metal ion-imprinted resins by use of complexation at the aqueous-organic interface, 
In: Molecular and Ionic Recognition with Imprinted Polymers, Bartsch RA, Maeda M (Eds.) The American Chemical Society: Washington DC, Ch. 17, 251-263, (1998)
   

Umeno D et al., Book chapter, Imprinting of proteins on polymer-coated DNA for affinity separation with enhanced selectivity, 
In: Molecular and Ionic Recognition with Imprinted Polymers, Bartsch RA, Maeda M (Eds.) The American Chemical Society: Washington DC, Ch. 14, 202-216, (1998)
   

Fujiwara I et al., Condensed-phosphate imprinted resins prepared by a surface template polymerization method.
Analytical Sciences, 16, (4), 407-412, (2000)
   

Tsukagoshi K et al., Book chapter, Imprinting polymerization for for recognition and separation of metal ions, 
In: Molecularly Imprinted Polymers: Man-Made Mimics of Antibodies and their Applications in Analytical Chemistry, Sellergren B (Ed.) Elsevier: Amsterdam, Ch. 9, 245-269, (2001)
   

Fujiwara I et al., Preparation of an organic acid-imprinted resin by a surface imprinting method.
Analytical Sciences, 18, (8), 943-945, (2002)
   

Fujiwara I et al., Preparation of Cu-II-imprinted microspheres with imidazole groups at the surfaces by surface imprinting polymerization.
Bunseki Kagaku, 52, (2), 147-150, (2003)
   

Fujiwara I et al., Preparation of ferrocyanide-imprinted pyridine-carrying microspheres by surface imprinting polymerization.
Analytical Sciences, 19, (4), 617-620, (2003)
   

Mafe S

Ali M et al., Biomolecular conjugation inside synthetic polymer nanopores via glycoprotein-lectin interactions.
Nanoscale, 3, (4), 1894-1903, (2011)
   

Mafra L

da Silva MS et al., Clean synthesis of molecular recognition polymeric materials with chiral sensing capability using supercritical fluid technology. Application as HPLC stationary phases.
Biosensors and Bioelectronics, 25, (7), 1742-1747, (2010)
   

Mafu LD

Mafu LD et al., Ion-imprinted polymers for environmental monitoring of inorganic pollutants: synthesis, characterization, and applications.
Environmental Science and Pollution Research, 20, (2), 790-802, (2013)
   

Mafu LD et al., Synthesis and characterization of ion imprinted polymeric adsorbents for the selective recognition and removal of arsenic and selenium in wastewater samples.
Journal of Saudi Chemical Society, 20, (5), 594-605, (2016)
   

Magalhães CS

Arruda MAZ et al., Book chapter, Strategies for Sample Preparation Focusing Biomolecules Determination/Characterization, 
In: Trends in Sample Preparation, Arruda MAZ (Ed.) Nova Science Publishers: Ch. 9, 245-288, (2006)
   

Magalhães JMCS

da Silva H et al., MIP-graphene-modified glassy carbon electrode for the determination of trimethoprim.
Biosensors and Bioelectronics, 52, 56-61, (2014)
   

Magan N

Tothill IE et al., Book chapter, New biosensors, 
In: Instrumentation and sensors for the food industry, Kress-Rogers E, Brimelow CJB (Eds.) Woodhead Publishing Ltd.: Cambridge, UK, Ch. 23, (2001)
   

Turner NW et al., Effect of the solvent on recognition properties of molecularly imprinted polymer specific for ochratoxin A.
Biosensors and Bioelectronics, 20, (6), 1060-1067, (2004)
   

Magan N, Mycotoxin contamination of food in Europe: Early detection and prevention strategies.
Mycopathologia, 162, (3), 245-253, (2006)
   

Pascale M et al., Use of itaconic acid-based polymers for solid-phase extraction of deoxynivalenol and application to pasta analysis.
Analytica Chimica Acta, 609, (2), 131-138, (2008)
   

Magaro E

Fiori M et al., Evaluation of two different clean-up steps, to minimise ion suppression phenomena in ion trap liquid chromatography-tandem mass spectrometry for the multi-residue analysis of [beta]-agonists in calves urine.
Analytica Chimica Acta, 529, (1-2), 207-210, (2005)
   

Magda J

Cho SH et al., Polymerization and characterization of molecularly imprinting polymer particle for sensing glutathione.
Abstracts of Papers of the American Chemical Society, 245, (PMSE), 507-(2013)
   

Magennis EP

Magennis EP et al., Bacteria-instructed synthesis of polymers for self-selective microbial binding and labelling.
Nature Materials, 13, (7), 748-755, (2014)
   

Maggi MA

Ruggieri F et al., Development of molecularly imprinted polymeric nanofibers by electrospinning and applications to pesticide adsorption.
Journal of Separation Science, 38, (8), 1402-1410, (2015)
   

Maghami F

Massumi S et al., Corrigendum to 'Highly sensitive and selective sensor based on molecularly imprinted polymer for voltammetric determination of Nevirapine in biological samples'.
Journal of Electroanalytical Chemistry, 882, Article114975-(2021)
   

Maghsoudi AS

Hassani S et al., Biosensors and their applications in detection of organophosphorus pesticides in the environment.
Archives of Toxicology, 91, (1), 109-130, (2017)
   

Magi E

Benedetti B et al., Multivariate optimization of an extraction procedure based on magnetic molecular imprinted polymer for the determination of polycyclic aromatic hydrocarbons in sea water.
Microchemical Journal, 145, 1199-1206, (2019)
   

Magner E

Farrington K et al., Predicting the performance of molecularly imprinted polymers: Selective extraction of caffeine by molecularly imprinted solid phase extraction.
Analytica Chimica Acta, 566, (1), 60-68, (2006)
   

Mahabadi M

Mahabadi M et al., Proceeding, Synthesis of Molecularly Imprinted Polymers for sorption of Mefenamic acid based on the surface of modified silica gel, 
(2011)
   

Mahabadi SA

Mahabadi SA et al., Proceeding, New molecularly imprinted polymer for extraction, preconcentration and determination of Nalidixic acid, 
(2011)
   

Panahi HA et al., Application of Molecularly Imprinted Polymer for Extraction and Determination of Nalidixic Acid by High-Performance Liquid Chromatography.
Separation Science and Technology, 50, (5), 683-689, (2015)
   

Mahabala PS

Tharpa K et al., New chemistry supporting portable solutions for end-stage renal disease dialysis treatment.
Journal of Artificial Organs, 23, (1), 47-53, (2020)
   

Mahajan R

Mahajan R et al., Highly Efficient Synthesis and Assay of Protein-Imprinted Nanogels by Using Magnetic Templates.
Angewandte Chemie International Edition, 58, (3), 727-730, (2019)
   

Mahani M

Fasihi J et al., Imprinted polymer grafted from silica particles for on-line trace enrichment and ICP OES determination of uranyl ion.
Microchemical Journal, 126, 316-321, (2016)
   

Mahani M et al., Carbon dots-embedded N-acetylneuraminic acid and glucuronic acid-imprinted polymers for targeting and imaging of cancer cells.
Microchimica Acta, 188, (7), Article224-(2021)
   

Mahar AM

Balouch A et al., Review: Arsenic Remediation by Synthetic and Natural Adsorbents.
Pakistan Journal of Analytical & Environmental Chemistry, 18, (1), 18-36, (2017)
   

Kumar A et al., Remediation techniques applied for aqueous system contaminated by toxic Chromium and Nickel ion.
Geology, Ecology, and Landscapes, 1, (2), 143-153, (2017)
   

Abdullah et al., Evaluation of the performance of a selective magnetite molecularly imprinted polymer for extraction of quercetin from onion samples.
Microchemical Journal, 162, Article105849-(2021)
   

Mahato TH

Baghel A et al., Synthesis and characterization of metal ion imprinted nano-porous polymer for the selective recognition of copper.
Biosensors and Bioelectronics, 22, (12), 3326-3334, (2007)
   

Pradhan S et al., Molecularly imprinted nanopatterns for the recognition of biological warfare agent ricin.
Biosensors and Bioelectronics, 25, (3), 592-598, (2009)
   

Mahboob S

Li YC et al., A novel sensitive and selective electrochemical sensor based on molecularly imprinted polymer on a nanoporous gold leaf modified electrode for warfarin sodium determination.
RSC Advances, 6, (49), 43724-43731, (2016)
   

Huang BT et al., Electrochemical sensing platform based on molecularly imprinted polymer decorated N, S co-doped activated graphene for ultrasensitive and selective determination of cyclophosphamide.
Talanta, 164, 601-607, (2017)
   

Mahdi M

Zavareh S et al., Synthesis of polydopamine as a new and biocompatible coating of magnetic nanoparticles for delivery of doxorubicin in mouse breast adenocarcinoma.
Cancer Chemotherapy and Pharmacology, 78, (5), 1073-1084, (2016)
   

Mahesar SA

Jagirani MS et al., Fabrication of cadmium tagged novel ion imprinted polymer for detoxification of the toxic Cd2+ion from aqueous environment.
Microchemical Journal, 158, Article105247-(2020)
   

Mahesh K

Naklua W et al., An imprinted dopamine receptor for discovery of highly potent and selective D3 analogues with neuroprotective effects.
Process Biochemistry, 50, (10), 1537-1556, (2015)
   

Naklua W et al., Molecularly imprinted polymer microprobes for manipulating neurological function by regulating temperature-dependent molecular interactions.
Process Biochemistry, 51, (1), 142-157, (2016)
   

Maheshwari S

Bhogal S et al., Surface Molecularly Imprinted Carbon Dots Based Core-Shell Material for Selective Fluorescence Sensing of Ketoprofen.
Journal of Fluorescence, 29, (1), 145-154, (2019)
   

Mahkam M

Djozan D et al., Preparation of new fibers on the basis of codeine imprinted polymer.
Materials and Manufacturing Processes, 22, (6), 758-763, (2007)
   

Djozan D et al., Preparation and binding study of solid-phase microextraction fiber on the basis of ametryn-imprinted polymer: Application to the selective extraction of persistent triazine herbicides in tap water, rice, maize and onion.
Journal of Chromatography A, 1216, (12), 2211-2219, (2009)
   

Djozan D et al., Evaluation of a new method for chemical coating of aluminum wire with molecularly imprinted polymer layer. Application for the fabrication of triazines selective solid-phase microextraction fiber.
Analytica Chimica Acta, 674, (1), 40-48, (2010)
   

Mahkam M et al., Imprinted polymers as drug delivery vehicles for anti-inflammatory drugs.
Nature and Science, 9, (5), 163-168, (2011)
   

Bodbodak S et al., Selective decontamination of aflatoxin M1 in milk by molecularly imprinted polymer coated on the surface of stainless steel plate.
International Journal of Dairy Technology, 71, (4), 868-878, (2018)
   

Mahlambi PN

Mtolo SP et al., Synthesis and application of a molecularly imprinted polymer in selective solid-phase extraction of efavirenz from water.
Water Science And Technology, 79, (2), 356-365, (2019)
   

Mahmood I

Betlem K et al., Evaluating the temperature dependence of heat-transfer based detection: A case study with caffeine and Molecularly Imprinted Polymers as synthetic receptors.
Chemical Engineering Journal, 359, 505-517, (2019)
   

Mahmood-Kashani H

Afkhami A et al., Fabrication of a new electrochemical sensor based on a new nano-molecularly imprinted polymer for highly selective and sensitive determination of tramadol in human urine samples.
Biosensors and Bioelectronics, 44, 34-40, (2013)
   

Madrakian T et al., Superparamagnetic surface molecularly imprinted nanoparticles for sensitive solid-phase extraction of tramadol from urine samples.
Talanta, 105, 255-261, (2013)
   

Mahmoodi NM

Arabzadeh N et al., Synthesis, characterization, and application of nano-molecularly imprinted polymer for fast solid-phase extraction of tartrazine from water environment.
Desalination and Water Treatment, 54, (9), 2452-2460, (2015)
   

Arabzadeh N et al., Enhanced photodegradation of hazardous tartrazine by composite of nanomolecularly imprinted polymer-nanophotocatalyst with high efficiency.
Desalination and Water Treatment, 57, (7), 3142-3151, (2016)
   

Mahmoud AM

El-Wekil MM et al., A novel molecularly imprinted sensing platform based on MWCNTs/AuNPs decorated 3D starfish like hollow nickel skeleton as a highly conductive nanocomposite for selective and ultrasensitive analysis of a novel pan-genotypic inhibitor velpatasvir in body fluids.
Journal of Molecular Liquids, 271, 105-111, (2018)
   

Mahmoud AM et al., Modification of N, S co-doped graphene quantum dots with p-aminothiophenol-functionalized gold nanoparticles for molecular imprint-based voltammetric determination of the antiviral drug sofosbuvir.
Microchimica Acta, 186, (9), Article617-(2019)
   

Mahmoud AM et al., Dual-recognition molecularly imprinted aptasensor based on gold nanoparticles decorated carboxylated carbon nanotubes for highly selective and sensitive determination of histamine in different matrices.
Analytica Chimica Acta, 1133, 58-65, (2020)
   

Abo-Elmagd IF et al., Impedimetric Sensors for Cyclocreatine Phosphate Determination in Plasma Based on Electropolymerized Poly(o-phenylenediamine) Molecularly Imprinted Polymers.
ACS Omega, 6, (46), 31282-31291, (2021)
   

Mahnashi MH et al., Enhanced molecular imprinted electrochemical sensing of histamine based on signal reporting nanohybrid.
Microchemical Journal, 168, Article106439-(2021)
   

Mahnashi MH et al., Ultrasensitive and selective molecularly imprinted electrochemical oxaliplatin sensor based on a novel nitrogen-doped carbon nanotubes/Ag@cu MOF as a signal enhancer and reporter nanohybrid.
Microchimica Acta, 188, (4), Article124-(2021)
   

Mahmoud GA

Mahmoud GA et al., Radiation synthesis of imprinted hydrogels for selective metal ions adsorption.
Desalination and Water Treatment, 57, (35), 16540-16551, (2016)
   

Mahmoud ME

Mahmoud ME et al., Imprinting "Nano-SiO2-Crosslinked Chitosan-Nano-TiO2" Polymeric Nanocomposite for Selective and Instantaneous Microwave-Assisted Sorption of Hg(II) and Cu(II).
ACS Sustainable Chemistry & Engineering, 6, (4), 4564-4573, (2018)
   

Mahmoud WE

Mahmoud WE et al., Synthesis and characterization of electropolymerized molecularly imprinted microporous polyaniline films for solar cell applications.
Polymer Composites, 34, (2), 299-304, (2013)
   

Mahmoud WH

Kamel AH et al., Biomimetic ciprofloxacin sensors made of molecularly imprinted network receptors for potential measurements.
Analytical Methods, 3, (4), 957-964, (2011)
   

Mahmoudi E

Azizkhani S et al., Adsorption of Copper from aqueous solution by chitosan using molecular imprinting technology.
Science and Technology Indonesia, 3, (4), 141-146, (2018)
   

Mahmoudi F

Mahani M et al., Carbon dots-embedded N-acetylneuraminic acid and glucuronic acid-imprinted polymers for targeting and imaging of cancer cells.
Microchimica Acta, 188, (7), Article224-(2021)
   

Mahmoudi M

Askim JR et al., Optical sensor arrays for chemical sensing: the optoelectronic nose.
Chemical Society Reviews, 42, (22), 8649-8682, (2013)
   

Mahmoudi M et al., Cell-Imprinted Substrates Direct the Fate of Stem Cells.
ACS Nano, 7, (10), 8379-8384, (2013)
   

Mahmoudi M et al., Correction to Cell-Imprinted Substrates Direct the Fate of Stem Cells.
ACS Nano, 8, (10), 11023-11023, (2014)
   

Mashinchian O et al., Cell-Imprinted Substrates Act as an Artificial Niche for Skin Regeneration.
ACS Applied Materials & Interfaces, 6, (15), 13280-13292, (2014)
   

Bonakdar S et al., Cell-Imprinted Substrates Modulate Differentiation, Redifferentiation, and Transdifferentiation.
ACS Applied Materials & Interfaces, 8, (22), 13777-13784, (2016)
   

Abadi PPSS et al., Engineering of Mature Human Induced Pluripotent Stem Cell-Derived Cardiomyocytes Using Substrates with Multiscale Topography.
Advanced Functional Materials, 28, (19), ArticleNo1707378-(2018)
   

Farvadi F et al., Cell shape affects nanoparticle uptake and toxicity: An overlooked factor at the nanobio interfaces.
Journal of Colloid and Interface Science, 531, 245-252, (2018)
   

Mahmud HNME

Nawaz N et al., Molecularly imprinted polymers-based DNA biosensors.
Analytical Biochemistry, 630, Article114328-(2021)
   

Mahnashi MH

Mahmoud AM et al., Modification of N, S co-doped graphene quantum dots with p-aminothiophenol-functionalized gold nanoparticles for molecular imprint-based voltammetric determination of the antiviral drug sofosbuvir.
Microchimica Acta, 186, (9), Article617-(2019)
   

Mahnashi MH et al., Enhanced molecular imprinted electrochemical sensing of histamine based on signal reporting nanohybrid.
Microchemical Journal, 168, Article106439-(2021)
   

Mahnashi MH et al., Ultrasensitive and selective molecularly imprinted electrochemical oxaliplatin sensor based on a novel nitrogen-doped carbon nanotubes/Ag@cu MOF as a signal enhancer and reporter nanohybrid.
Microchimica Acta, 188, (4), Article124-(2021)
   

Mahon C

Mahon C et al., Investigating templating within Polymer-Scaffolded Dynamic Combinatorial Libraries.
Polymer Chemistry, 4, (2), 368-377, (2013)
   

Mahon CS

Mahon CS et al., Templating a polymer-scaffolded dynamic combinatorial library.
Chemical Communications, 47, (25), 7209-7211, (2011)
   

Mahon CS et al., Templation-induced re-equilibration in polymer-scaffolded dynamic combinatorial libraries leads to enhancements in binding affinities.
Chemical Science, 4, (9), 3661-3666, (2013)
   

Mahon CS et al., Mimicking nature with synthetic macromolecules capable of recognition.
Nature Chemistry, 6, (8), 665-672, (2014)
   

Mahouche-Chergui S

Gam-Derouich S et al., Design of molecularly imprinted polymer grafts with embedded gold nanoparticles through the interfacial chemistry of aryl diazonium salts.
Polymer, 52, (20), 4463-4470, (2011)
   

Mahouche-Chergui S et al., Aryl diazonium salts: a new class of coupling agents for bonding polymers, biomacromolecules and nanoparticles to surfaces.
Chemical Society Reviews, 40, (7), 4143-4166, (2011)
   

Gam-Derouich S et al., Book chapter, Polymer Grafting to Aryl Diazonium-Modified Materials: Methods and Applications, 
In: Aryl Diazonium Salts: New Coupling Agents in Polymer and Surface Science, Chehimi MM (Ed.) Wiley-VCH Verlag GmbH & Co.: Ch. 6, 125-158, (2012)
   

Salmi Z et al., On the interfacial chemistry of aryl diazonium compounds in polymer science.
Chemical Papers, 66, (5), 369-391, (2012)
   

Mahugo-Santana C

Aufartová J et al., Determination of steroid hormones in biological and environmental samples using green microextraction techniques: An overview.
Analytica Chimica Acta, 704, (1-2), 33-46, (2011)
   

Mai AT

Vu VP et al., Possible detection of antibiotic residue using molecularly imprinted polyaniline-based sensor.
Vietnam Journal of Chemistry, 57, (3), 328-333, (2019)
   

Mai D

Yang P et al., A novel morphological ion imprinted polymers for selective solid phase extraction of Cd(II): Preparation, adsorption properties and binding mechanism to Cd(II).
Reactive and Functional Polymers, 151, Article104569-(2020)
   

Mai SF

Liang GH et al., Molecularly imprinted monolithic column based on functionalized [beta]-cyclodextrin and multi-walled carbon nanotubes for selective recognition of benzimidazole residues in citrus samples.
Microchemical Journal, 146, 1285-1294, (2019)
   

Mai ZB

Long CY et al., Determination of multi-residue for malachite green, gentian violet and their metabolites in aquatic products by high-performance liquid chromatography coupled with molecularly imprinted solid-phase extraction.
Journal of Chromatography A, 1216, (12), 2275-2281, (2009)
   

Long CY et al., Synthesis and characterization of a novel molecularly imprinted polymer for simultaneous extraction and determination of water-soluble and fat-soluble synthetic colorants in chilli products by solid phase extraction and high performance liquid chromatography.
Journal of Chromatography A, 1216, (47), 8379-8385, (2009)
   

Maia LB

Viveiros R et al., Green strategy to produce large core-shell affinity beads for gravity-driven API purification processes.
Journal of Industrial and Engineering Chemistry, 54, 341-349, (2017)
   

Maia P

Abrão LCC et al., Determination of Tetracyclines by Solid-Phase Extraction with a Molecularly Imprinted Polymer and High-Performance Liquid Chromatography.
Analytical Letters, 47, (13), 2183-2194, (2014)
   

Maia PP

Freitas MB et al., Amitriptyline and Nortriptyline in Plasma: Solid-Phase Extraction in Molecularly Imprinted Polymers and Silica Octadecil for High Performance Liquid Chromatography Analysis.
Latin American Journal of Pharmacy, 28, (1), 70-79, (2009)
   

Franqui LS et al., Molecularly imprinted solid-phase extraction of urinary trans-trans muconic acid and analysis by gas chromatography-mass spectrometry.
Quimica Nova, 35, (8), 1577-1581, (2012)
   

Franqui LS et al., Synthesis and characterization of a magnetic molecularly imprinted polymer for the selective extraction of nicotine and cotinine from urine samples followed by GC-MS analysis.
Analytical Methods, 7, (21), 9237-9244, (2015)
   

Martins MCG et al., Determination of Cotinine in Urine by Molecularly Imprinted Polymer Solid Phase and Liquid-Liquid Extraction Coupled with Gas Chromatography.
Analytical Letters, 48, (8), 1245-1256, (2015)
   

Maie H

Fujii Y et al., Preparation of palladium(II) and copper(II) selective chelating resin bearing 2-acetylphenol ligand.
Chemistry Letters, 21, (6), 995-998, (1992)
   

Maier G

Maier G et al., Core shell Maier G et al., Molecular imprinting and molecular recognition in hyperbranched polymers.
Abstracts of Papers of the American Chemical Society, 221, (MSE), 168-168, (2001)
   

Maier NA

Maier NA et al., Book chapter, Stereoselective Chromatographic Methods for Drug Analysis, 
In: Chirality in Drug Research, Francotte E, Lindner W (Eds.) Wiley-VCH Verlag GmbH & Co. KGaA: 189-260, (2006)
   

Maier NM

Maier NM et al., Separation of enantiomers: needs, challenges, perspectives.
Journal of Chromatography A, 906, (1-2), 3-33, (2001)
   

Jodlbauer J et al., Towards ochratoxin A selective molecularly imprinted polymers for solid-phase extraction.
Journal of Chromatography A, 945, (1-2), 45-63, (2002)
   

Maier NM et al., Molecularly imprinted polymer-assisted sample clean-up of ochratoxin A from red wine: merits and limitations.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 103-111, (2004)
   

Gavioli E et al., Analyte templating: Enhancing the enantioselectivity of chiral selectors upon incorporation into organic polymer environments.
Analytical Chemistry, 77, (15), 5009-5018, (2005)
   

Maier NM et al., Chiral recognition applications of molecularly imprinted polymers: a critical review.
Analytical and Bioanalytical Chemistry, 389, (2), 377-397, (2007)
   

Maier P

Maier P et al., Scanning force microscopy study of the morphology of spin-cast molecular-imprinted nylon thin films.
Surface And Interface Analysis, 36, (9), 1340-1343, (2004)
   

Maier WF

Heilmann J et al., Selective catalysis on silicon dioxide with substrate-specific cavities.
Angewandte Chemie International Edition, 33, (4), 471-473, (1994)
   

Heilmann J et al., Problems in selective catalysis with molecular imprints in silica - selective lactones formation from hydroxyesters in micropores.
Zeitschrift Fur Naturforschung Section B-A Journal Of Chemical Sciences, 50, 460-468, (1995)
   

Maier WF et al., Transesterification on imprinted silica - Reply.
Catalysis Letters, 46, (1-2), 137-140, (1997)
   

Hunnius M et al., Selective surface adsorption versus imprinting in amorphous microporous silicas.
Microporous And Mesoporous Materials, 29, (3), 389-403, (1999)
   

Mainwaring DE

Al Kobaisi M et al., The effect of molecular imprinting on the pore size distribution of polymers.
Adsorption, 13, (3), 315-321, (2007)
   

Jacob R et al., Synthesis, Characterization, and ab Initio Theoretical Study of a Molecularly Imprinted Polymer Selective for Biosensor Materials.
Journal of Physical Chemistry A, 112, (2), 322-331, (2008)
   

Maistrenko VN

Gus’kov VY et al., New Chiral Stationary Phases: Preparation, Properties, and Applications in Gas Chromatography.
Journal of Analytical Chemistry, 73, (10), 937-945, (2018)
   

Maitre A

Gam-Derouich S et al., Quantum dot-imprinted polymers with size and shell-selective recognition properties.
Chemical Communications, 51, 14933-14936, (2015)
   

Gam-Derouich S et al., Correction: Quantum dot-imprinted polymers with size and shell-selective recognition properties.
Chemical Communications, (2015)
   

Maity D

Maity D et al., Book chapter, Synthetic Receptors for Amino Acids and Peptides, 
In: Synthetic Receptors for Biomolecules: Design Principles and Applications, Smith BD (Ed.) The Royal Society of Chemistry: Cambridge, Ch. 8, 326-368, (2015)
   

Maity N

Muratsugu S et al., Preparation and catalytic performance of a molecularly imprinted Pd complex catalyst for Suzuki cross-coupling reactions.
Dalton Transactions, 46, (10), 3125-3134, (2017)
   

Maity SK

Roy E et al., A metronidazole-probe sensor based on imprinted biocompatible nanofilm for rapid and sensitive detection of anaerobic protozoan.
RSC Advances, 4, (62), 32881-32893, (2014)
   

Maiyelvaganan KR

Selvam SP et al., Novel SeS2-loaded Co MOF with Au@PANI comprised electroanalytical molecularly imprinted polymer-based disposable sensor for patulin mycotoxin.
Biosensors and Bioelectronics, 187, Article113302-(2021)
   

Majda M

Bilewicz R et al., Bifunctional monomolecular Langmuir-Blodgett-films at electrodes - Electrochemistry at single molecule gate sites.
Journal of the American Chemical Society, 113, (14), 5464-5466, (1991)
   

Majdi M

Majdi M et al., Determination of Dexamethasone disodium phosphate using potentiometric sensors based on molecularly imprinted polymer in flow injection and batch systems.
Analytical and Bioanalytical Electrochemistry, 13, (1), 139-159, (2021)
   

Majeed S

Li HD et al., An amperometric sensor for the determination of benzophenone in food packaging materials based on the electropolymerized molecularly imprinted poly-o-phenylenediamine film.
Talanta, 99, 811-815, (2012)
   

Tong YJ et al., Electrochemical cholesterol sensor based on carbon nanotube@molecularly imprinted polymer modified ceramic carbon electrode.
Biosensors and Bioelectronics, 47, 553-558, (2013)
   

Majewska M

Lach P et al., Gate Effect Munawar H et al., Electrochemical determination of fumonisin B1 using a chemosensor with a recognition unit comprising molecularly imprinted polymer nanoparticles.
Sensors and Actuators B: Chemical, 321, Article128552-(2020)
   

Majid ZA

Zinalibdin MR et al., Preparation, characterization and adsorption study of o-cresol molecularly imprinted grafted silica gel sorbent synthesized by sol-gel polymerization.
AIP Conference Proceedings, 1904, (1), ArticleNo020083-(2017)
   

Majidi D

Yilmaz E et al., Whole cell imprinting based Escherichia coli sensors: A study for SPR and QCM.
Sensors and Actuators B: Chemical, 209, 714-721, (2015)
   

Majidi M

Mashinchian O et al., Cell-Imprinted Substrates Act as an Artificial Niche for Skin Regeneration.
ACS Applied Materials & Interfaces, 6, (15), 13280-13292, (2014)
   

Bonakdar S et al., Cell-Imprinted Substrates Modulate Differentiation, Redifferentiation, and Transdifferentiation.
ACS Applied Materials & Interfaces, 8, (22), 13777-13784, (2016)
   

Majidi N

Rezaei B et al., Solid-phase molecularly imprinted pre-concentration and spectrophotometric determination of isoxicam in pharmaceuticals and human serum.
Talanta, 78, (2), 418-423, (2009)
   

Rezaei B et al., Molecularly imprinted-multiwall carbon nanotube paste electrode as a biosensor for voltammetric detection of rutin.
Analytical Methods, 3, (11), 2510-2516, (2011)
   

Majka A

Huynh TP et al., Chemosensor for Selective Determination of 2, 4, 6-Trinitrophenol Using a Custom Designed Imprinted Polymer Recognition Unit Cross-Linked to a Fluorophore Transducer.
ACS Sensors, 1, (6), 636-639, (2016)
   

Majors R

Majors R et al., Variables in the preparation of modified silica adsorbents.
Analytical Chemistry, 41, (8), 1052-1057, (1969)
   

Majors R et al., Effects of structural changes of the pretreating agent on adsorption by modified silica adsorbents.
Analytical Chemistry, 41, (8), 1058-1065, (1969)
   

Batlokwa BS et al., A Novel Molecularly Imprinted Polymer for the Selective Removal of Chlorophyll from Heavily Pigmented Green Plant Extracts prior to Instrumental Analysis.
Journal of Chemistry, 2013, Article ID 540240-(2013)
   

Majors RE

Majors RE, Stationary-phase technology in separation science.
Lc Gc North America, 18, (12), 1214-+, (2000)
   

Ensing K et al., Selective sorbents for solid-phase extraction based on molecularly imprinted polymers.
Lc Gc North America, 19, (9), 942-954, (2001)
   

Ensing K et al., Selective sorbents for solid-phase extraction based on molecularly imprinted polymers.
Lc Gc Europe, 15, (1), 16-+, (2002)
   

Majors RE, Advanced topics in solid-phase extraction: Chemistries.
Lc Gc Europe, 20, (5), 266-279, (2007)
   

Majors RE, Advanced topics in solid-phase extraction: Chemistries.
Lc Gc North America, 25, (1), 16-(2007)
   

Majors RE, Shaping the future: Part 2.
The Column, 3, (6), 26-30, (2007)
   

Majors RE, The role of polymers in solid-phase extraction and sample preparation.
Lc Gc North America, 26, (11), 1074-1090, (2008)
   

Majors RE, Novel Sorbents for Solid-Liquid Extraction.
Lc Gc North America, 31, (12), 984-991, (2013)
   

Majumdar S

Adhikari B et al., Polymers in sensor applications.
Progress in Polymer Science, 29, (7), 699-766, (2004)
   

Maki H

Kido H et al., Metal-ion complexation equilibria of ion-exchange resins prepared by a surface template polymerization.
Kobunshi Ronbunshu, 50, (5), 403-410, (1993)
   

Maki H et al., Catechol amines selective polymers prepared by molecular imprinting.
Polymer Preprints, Japan, 54, (1), 1486-(2005)
   

Takeuchi T et al., Dopamine selective molecularly imprinted polymers via post-imprinting modification.
Organic & Biomolecular Chemistry, 4, (3), 565-568, (2006)
   

Makote R

Makote R et al., Dopamine recognition in templated silicate films.
Chemical Communications, (3), 425-426, (1998)
   

Makote R et al., Template recognition in inorganic-organic hybrid films prepared by the sol-gel process.
Chemistry of Materials, 10, (9), 2440-2445, (1998)
   

Makote RD

Luo L et al., Chromatographic characterization of molecularly imprinted polymers for nitroaromatics.
Abstracts of Papers of the American Chemical Society, 218, (MACR), 28-28, (1999)
   

Makote RD et al., Matrix-induced modification of imprinting effect for Cu2+ adsorption in hybrid silica matrices.
Analytica Chimica Acta, 435, (1), 169-175, (2001)
   

Makoto M

Kobayashi T et al., Selective Removal of Bisphenol A From Serum Using Molecular Imprinted Polymer Membranes.
Therapeutic Apheresis and Dialysis, 13, (1), 19-26, (2009)
   

Makower A

Scheller FW et al., Book chapter, New recognition elements in biosensing, 
In: Enzyme Engineering XIV, Laskin AI, Li GX, Yu YT (Eds.) New York Academy of Sciences: New York, 37-45, (1998)
   

Maksimov AL

Karakhanov EA et al., Molecular imprinting as a method for the creation of cyclodextrin-based supramolecular catalysts used in the Wacker oxidation of unsaturated compounds.
Petroleum Chemistry, 45, (2), 79-86, (2005)
   

Karakhanov EA et al., Molecular recognition and catalysis: from macrocyclic receptors to molecularly imprinted metal complexes.
Macromolecular Symposia, 235, (1), 39-51, (2006)
   

Karakhanov EA et al., Oxidation of 2-naphthol in the presence of catalysts based on modified [beta]-cyclodextrins.
Petroleum Chemistry, 47, (6), 402-408, (2007)
   

Karakhanov EA et al., Design of supramolecular metal complex catalytic systems for petrochemical and organic synthesis.
Russian Chemical Bulletin, 57, (4), 780-792, (2008)
   

Karakhanov EA et al., Molecules-Receptors: Different Approaches to Design Effective Catalysts.
Macromolecular Symposia, 270, (1), 106-116, (2008)
   

Maksimova G

Patrikeev V et al., Selectivity of an adsorbent produced in the presence of bacteria with respect to optical isomers.
Doklady Akademii Nauk SSSR, 132, 850-852, (1960)
   

Patrikeev V et al., Some biological properties of specifically formed silica.
Doklady Akademii Nauk SSSR, 146, 707-709, (1962)
   

Maksym R

Dabrowski M et al., Facile Fabrication of Surface-Imprinted Macroporous Films for Chemosensing of Human Chorionic Gonadotropin Hormone.
ACS Applied Materials & Interfaces, 11, (9), 9265-9276, (2019)
   

Malaekeh-Nikouei B

Malaekeh-Nikouei B et al., Controlled release of prednisolone acetate from molecularly imprinted hydrogel contact lenses.
Journal of Applied Polymer Science, 126, (1), 387-394, (2012)
   

Mohajeri SA et al., Development of a pH-responsive imprinted polymer for diclofenac and study of its binding properties in organic and aqueous media.
Drug Development and Industrial Pharmacy, 38, (5), 616-622, (2012)
   

Malaekeh-Nikouei B et al., Preparation of a Molecularly Imprinted Soft Contact Lens as a New Ocular Drug Delivery System for Dorzolamide.
Current Drug Delivery, 10, (3), 279-285, (2013)
   

Kioomars S et al., Ciprofloxacin-imprinted hydrogels for drug sustained release in aqueous media.
Pharmaceutical Development and Technology, 22, (1), 122-129, (2017)
   

Malafaya PB

Malafaya PB et al., Drug delivery therapies II.: Strategies for delivering bone regenerating factors.
Current Opinion in Solid State & Materials Science, 6, (4), 297-312, (2002)
   

Malaisamy R

Malaisamy R et al., Evaluation of molecularly imprinted polymer blend filtration membranes under solid phase extraction conditions.
Separation and Purification Technology, 39, (3), 211-219, (2004)
   

Ulbricht M et al., Insights into the mechanism of molecular imprinting by immersion precipitation phase inversion of polymer blends via a detailed morphology analysis of porous membranes.
Journal of Materials Chemistry, 15, (14), 1487-1497, (2005)
   

Malakooti N

Malakooti N et al., Imprinted Contact Lenses for Sustained Release of Polymyxin B and Related Antimicrobial Peptides.
Journal of Pharmaceutical Sciences, 104, (10), 3386-3394, (2015)
   

Malakpour A

Shinde S et al., Sialic Acid-Imprinted Fluorescent Core-Shell Particles for Selective Labeling of Cell Surface Glycans.
Journal of the American Chemical Society, 137, (43), 13908-13912, (2015)
   

Malanoski AP

Johnson-White B et al., Sunlight-catalyzed conversion of cyclic organics with novel mesoporous organosilicas.
Catalysis Communications, 8, (7), 1052-1056, (2007)
   

Johnson BJ et al., Imprinted Nanoporous Organosilicas for Selective Adsorption of Nitroenergetic Targets.
Langmuir, 24, (16), 9024-9029, (2008)
   

Johnson BJ et al., Proceeding, Functional and functionalized silicate materials, 
19-24, (2011)
   

Johnson BJ et al., Adsorption of organophosphates from solution by porous organosilicates: Capillary phase-separation.
Microporous And Mesoporous Materials, 195, 154-160, (2014)
   

Malapit CA

Silverio OV et al., Development of dieldrin, endosulfan, and hexachlorobenzene-imprinted polymers for dye-displacement array sensing.
Journal of Applied Polymer Science, 134, (2), ArticleNo44401-ArticleNo44n/a, (2017)
   

Maldaner AO

Grothe RA et al., Electroanalytical profiling of cocaine samples by means of an electropolymerized molecularly imprinted polymer using benzocaine as the template molecule.
Analyst, 146, (5), 1747-1759, (2021)
   

Malecha M

Turner NW et al., Effect of the solvent on recognition properties of molecularly imprinted polymer specific for ochratoxin A.
Biosensors and Bioelectronics, 20, (6), 1060-1067, (2004)
   

Malecha MM

Saint-Pierre G et al., Proceeding, Smart sensor for environmental applications, 
Cane C, Chiao JC, Verdu FV (Eds.), 273-284, (2005)
   

Malek F

Hatamluyi B et al., Improved solid phase extraction for selective and efficient quantification of sunset yellow in different food samples using a novel molecularly imprinted polymer reinforced by Fe3O4@UiO-66-NH2.
Food Chemistry, 357, Article129782-(2021)
   

Malek NFA

Mustapa NRN et al., Ion imprinted polymers for selective recognition and separation of lanthanum and cerium ions from other lanthanide.
Separation Science and Technology, 51, (17), 2762-2771, (2016)
   

Malekzadeh G

Gholivand MB et al., Fabrication of an electrochemical sensor based on computationally designed molecularly imprinted polymers for determination of cyanazine in food samples.
Analytica Chimica Acta, 713, (1), 36-44, (2012)
   

Gholivand MB et al., Computational design and synthesis of a high selective molecularly imprinted polymer for voltammetric sensing of propazine in food samples.
Talanta, 89, (1), 513-520, (2012)
   

Gholivand MB et al., Determination of lamotrigine by using molecularly imprinted polymer-carbon paste electrode.
Journal of Electroanalytical Chemistry, 692, 9-16, (2013)
   

Karimian N et al., Cefixime detection by a novel electrochemical sensor based on glassy carbon electrode modified with surface imprinted polymer/multiwall carbon nanotubes.
Journal of Electroanalytical Chemistry, 771, 64-72, (2016)
   

Torkashvand M et al., Construction of a new electrochemical sensor based on molecular imprinting recognition sites on multiwall carbon nanotube surface for analysis of ceftazidime in real samples.
Sensors and Actuators B: Chemical, 231, 759-767, (2016)
   

Malekzadeh M

Malekzadeh M et al., Development of a New Sensitive Electrochemical Sensor for Dapsone Detection using a Cobalt Metal-Organic Framework/Molecularly Imprinted Polymer.
Analytical & Bioanalytical Electrochemistry, 13, (2), 226-238, (2021)
   

Malerod H

Rogeberg M et al., On-line solid phase extraction-liquid chromatography, with emphasis on modern bioanalysis and miniaturized systems.
Journal of Pharmaceutical and Biomedical Analysis, 87, 120-129, (2014)
   

Malfatti L

Carboni D et al., Molecularly imprinted La-doped mesoporous titania films with hydrolytic properties toward organophosphate pesticides.
New Journal of Chemistry, 37, (10), 2995-3002, (2013)
   

Carboni D et al., Magnetic core-shell nanoparticles coated with a molecularly imprinted organogel for organophosphate hydrolysis.
Journal of Sol-Gel Science and Technology, 79, (2), 395-404, (2016)
   

Carboni D et al., Improving the Selective Efficiency of Graphene-Mediated Enhanced Raman Scattering through Molecular Imprinting.
ACS Applied Materials & Interfaces, 8, (49), 34098-34107, (2016)
   

Carboni D et al., Selective detection of organophosphate through molecularly imprinted GERS-active hybrid organic-inorganic materials.
Journal of Raman Spectroscopy, 49, (1), 189-197, (2018)
   

Jiang Y et al., Graphene Oxide-Silver Nanoparticles in Molecularly-Imprinted Hybrid Films Enabling SERS Selective Sensing.
Materials, 11, (9), ArticleNo1674-(2018)
   

Malhotra BD

Malhotra BD et al., Prospects of conducting polymers in biosensors.
Analytica Chimica Acta, 578, (1), 59-74, (2006)
   

Roy AK et al., Molecularly imprinted polyaniline film for ascorbic acid detection.
Journal of Molecular Recognition, 24, (4), 700-706, (2011)
   

Roy AC et al., Molecularly imprinted polyaniline-polyvinyl sulphonic acid composite based sensor for para-nitrophenol detection.
Analytica Chimica Acta, 777, 63-71, (2013)
   

Chauhan R et al., Recent advances in mycotoxins detection.
Biosensors and Bioelectronics, 81, 532-545, (2016)
   

Maligaspe E

Pietrzyk A et al., Molecularly imprinted poly[bis(2, 2'-bithienyl)methane] film with built-in molecular recognition sites for a piezoelectric microgravimetry chemosensor for selective determination of dopamine.
Bioelectrochemistry, 80, (1), 62-72, (2010)
   

Malihe KS

Malihe KS et al., Magnetite molecularly imprinted nanoparticles for selective detection of phenol in wastewater samples followed by high performance liquid chromatography.
Indian Journal of Scientific Research, 5, (1), 362-368, (2014)
   

Malik AA

Malik AA et al., Molecularly imprinted polymer for human viral pathogen detection.
Materials Science and Engineering: C, 77, 1341-1348, (2017)
   

Malik AK

Kaur K et al., Micelle enhanced and terbium sensitized spectrofluorimetric determination of danofloxacin in milk using molecularly imprinted solid phase extraction.
Spectrochimica Acta Part A-Molecular and Biomolecular Spctroscopy, 96, 790-795, (2012)
   

Narula P et al., Recent Progress, Challenges and Prospects in Monitoring Plastic-Derived Xenoestrogens Using Molecularly Imprinted Sorbents.
Chromatographia, 77, (3-4), 207-221, (2014)
   

Singh B et al., Recent Advances in Sample Preparation Methods for Analysis of Endocrine Disruptors from Various Matrices.
Critical Reviews in Analytical Chemistry, 44, (3), 255-269, (2014)
   

Kaur R et al., Molecularly Imprinted Polymers-Solid Phase Extraction Coupled With HPLC-FLD for the Analysis of Four Fluoroquinolones in Honey and Urine.
Journal of Pharmaceutical, Chemical and Biological Sciences, 6, (2), 60-69, (2018)
   

Bhogal S et al., Surface Molecularly Imprinted Carbon Dots Based Core-Shell Material for Selective Fluorescence Sensing of Ketoprofen.
Journal of Fluorescence, 29, (1), 145-154, (2019)
   

Mohiuddin I et al., Preparation and evaluation of a porous molecularly imprinted polymer for selective recognition of the antiepileptic drug carbamazepine.
Environmental Research, 176, Article108580-(2019)
   

Mohiuddin I et al., Porous molecularly-imprinted polymer for detecting diclofenac in aqueous pharmaceutical compounds.
Chemical Engineering Journal, 382, Article123002-(2020)
   

Malik MI

Malik MI et al., Recent Applications of Molecularly Imprinted Polymers in Analytical Chemistry.
Separation & Purification Reviews, 48, (3), 179-219, (2019)
   

Zahara S et al., Molecular imprinting-based extraction of rosmarinic acid from Salvia hypoleuca extract.
Reactive and Functional Polymers, 166, Article104984-(2021)
   

Malinauskas A

Ramanavicius A et al., Electrochemical sensors based on conducting polymer--polypyrrole.
Electrochimica Acta, 51, (27), 6025-6037, (2006)
   

Malitesta C

Malitesta C et al., Molecularly imprinted electrosynthesized polymers: New materials for biomimetic sensors.
Analytical Chemistry, 71, (7), 1366-1370, (1999)
   

Longo L et al., Synthesis of a new substituted zinc phthalocyanine as functional monomer in the preparation of MIPs.
Journal of Porphyrins and Phthalocyanines, 10, (8), 1061-1065, (2006)
   

Malitesta C et al., Synthesis of a Molecularly Imprinted Polymer for Dioxin.
Sensors, 6, (8), 915-924, (2006)
   

Zattoni A et al., Characterization of titanium dioxide nanoparticles imprinted for tyrosine by flow field-flow fractionation and spectrofluorimetric analysis.
Inorganica Chimica Acta, 360, (3), 1063-1071, (2007)
   

Longo L et al., Book chapter, Synthesis and selective nucleoside recognition of a new substituted zinc-phthalocyanine, 
In: Sensors And Microsystems, Siciliano P, Capone S, Di Natale C, D'Amico A (Eds.) World Scientific: 86-90, (2008)
   

Mazzotta E et al., Development of a sensor prepared by entrapment of MIP particles in electrosynthesised polymer films for electrochemical detection of ephedrine.
Biosensors and Bioelectronics, 23, (7), 1152-1156, (2008)
   

Mazzotta E et al., Preliminary Study on Electrosynthesis of a Co-Porphyrin Based Molecularly Imprinted Polymer for the Selective Detection of the Herbicide 2, 4-Dichlorophenoxy Carboxylic Acid.
Sensor Letters, 6, (4), 618-622, (2008)
   

Picca RA et al., Book chapter, Synthesis and Characterization of Imprinted TiO2 Nanoparticles: Preliminary results, 
In: Sensors And Microsystems, Siciliano P, Capone S, Di Natale C, D'Amico A (Eds.) World Scientific: 287-291, (2008)
   

Malitesta C et al., X-Ray Photoelectron Spectroscopy characterization of electrosynthesized poly(3-thiophene acetic acid) and its application in Molecularly Imprinted Polymers for atrazine.
Thin Solid Films, 518, (14), 3705-3709, (2010)
   

Mazzotta E et al., Electrochemical detection of the toxic organohalide 2, 4-DB using a Co-porphyrin based electrosynthesized molecularly imprinted polymer.
Sensors and Actuators B: Chemical, 148, (1), 186-194, (2010)
   

Mazzotta E et al., Book chapter, Electrochemically Synthesized Molecularly Imprinted Polymers for Sensing Applications, 
In: Sensors and Microsystems, Neri G, Donato N, D'Amico A, Di Natale C (Eds.) Springer Netherlands: Ch. 66, 409-413, (2011)
   

Malitesta C et al., MIP sensors - the electrochemical approach.
Analytical and Bioanalytical Chemistry, 402, (5), 1827-1846, (2012)
   

Mazzotta E et al., Electrosynthesis of molecularly imprinted polypyrrole for the antibiotic levofloxacin.
Thin Solid Films, 520, (6), 1938-1943, (2012)
   

Mazzotta E et al., Proceeding, Microstructuring conducting polymers and molecularly imprinted polymers by light-activated electropolymerization on micromachined silicon. Applications in electrochemical sensing, 
1-4, (2013)
   

Díaz-Álvarez M et al., Evaluation of electrochemically synthesized sulfadimethoxine-imprinted polymer for solid-phase microextraction of sulfonamides.
Journal of Molecular Recognition, 27, (6), 415-420, (2014)
   

Picca RA et al., Book chapter, Novel Format of Molecularly Imprinted Polymers for the Development of Electrochemical Sensors, 
In: Sensors, Baldini F, D'Amico A, Di Natale C, Siciliano P, Seeber R, De Stefano L, Bizzarri R, Andò B (Eds.) Springer: New York, 165-169, (2014)
   

Introna B et al., Proceeding, Electrochemical sensor for Serotonin based on a composite made of core-shell molecularly imprinted polymer nanoparticles and polyethilenedioxythiophene, 
1-4, (2015)
   

Turco A et al., Book chapter, Molecularly Imprinted Overoxidized Polypyrrole as Recognition Element in the Electrochemical Detection of Sulfadimethoxine, 
In: Sensors: Proceedings of the Second National Conference on Sensors, Rome 19-21 February, 2014, Compagnone D, Baldini F, Di Natale C, Betta G, Siciliano P (Eds.) Springer: Heidelberg, New York, Dordrecht, London, Ch. 27, 153-157, (2015)
   

Mazzotta E et al., Solid-phase synthesis of electroactive nanoparticles of molecularly imprinted polymers. A novel platform for indirect electrochemical sensing applications.
Sensors and Actuators B: Chemical, 229, 174-180, (2016)
   

Malitesta C et al., From Electrochemical Biosensors to Biomimetic Sensors Based on Molecularly Imprinted Polymers in Environmental Determination of Heavy Metals.
Frontiers in Chemistry, 5, ArticleNo47-(2017)
   

Mazzotta E et al., Book chapter, Electrosynthesized Molecularly Imprinted Polymers for Chemosensing: Fundamentals and Applications, 
In: Molecularly Imprinted Polymers for Analytical Chemistry Applications, Kutner W, Sharma PS (Eds.) Royal Society of Chemistry: Ch. 13, 412-446, (2018)
   

Turco A et al., Preparation and characterization of molecularly imprinted mussel inspired film as antifouling and selective layer for electrochemical detection of sulfamethoxazole.
Sensors and Actuators B: Chemical, 255, (Part 3), 3374-3383, (2018)
   

Di Masi S et al., Synthesis and Application of Ion-Imprinted Nanoparticles in Electrochemical Sensors for Copper (II) Determination.
ChemNanoMat, 5, (6), 754-760, (2019)
   

Rapini R et al., NanoMIP-based approach for the suppression of interference signals in electrochemical sensors.
Analyst, 144, (24), 7290-7295, (2019)
   

Di Masi S et al., Sensor based on electrosynthesised imprinted polymeric film for rapid and trace detection of copper(II) ions.
Sensors and Actuators B: Chemical, 307, Article127648-(2020)
   

Di Masi S et al., Corrigendum to "Sensor based on electrosynthesised imprinted polymeric film for rapid and trace detection of copper(II) ions" [Sens. Actuators, B 307 (2020) 127648].
Sensors and Actuators B: Chemical, 311, Article127910-(2020)
   

D’Aurelio R et al., A Comparison of EIS and QCM NanoMIP-Based Sensors for Morphine.
Nanomaterials, 11, (12), ArticleNo3360-(2021)
   

Malivindi R

Parisi OI et al., Smart Bandage Based on Molecularly Imprinted Polymers (MIPs) for Diclofenac Controlled Release.
Pharmaceuticals, 11, (4), ArticleNo93-(2018)
   

Parisi OI et al., Design and development of plastic antibodies against SARS-CoV-2 RBD based on molecularly imprinted polymers that inhibit in vitro virus infection.
Nanoscale, 13, (40), 16885-16899, (2021)
   

Malkin I

Polyakov MV et al., On the structure of silica.
Zhurnal Fizieskoj Khimii/Akademiya SSSR, 4, 454-456, (1933)
   

Malkova TL

Voronin AV et al., Molecularly imprinted sorbent for biological fluids sample preparation in forensic toxicology (in Russian).
Sudebno-Meditsinskaya Ekspertisa, 64, (6), 39-42, (2021)
   

Mallakpour S

Rezaei B et al., A Selective Solid-Phase Extraction and Preconcentration Method with Using Molecularly Imprinted Polymer for Piroxicam in Pharmaceutical Sample.
Analytical Letters, 41, (10), 1818-1831, (2008)
   

Rezaei B et al., Solid-phase molecularly imprinted pre-concentration and spectrophotometric determination of isoxicam in pharmaceuticals and human serum.
Talanta, 78, (2), 418-423, (2009)
   

Rezaei B et al., Application of Molecularly Imprinted Polymer for Solid Phase Extraction and Preconcentration of Hydrochlorothiazide in Pharmaceutical and Serum Sample Analysis.
Journal of the Iranian Chemical Society, 7, (4), 1004-1011, (2010)
   

Mallavia R

Valero-Navarro A et al., The development of a MIP-optosensor for the detection of monoamine naphthalenes in drinking water.
Biosensors and Bioelectronics, 24, (7), 2305-2311, (2009)
   

Mallik S

Mallik S et al., Molecular recognition of protein analogs.
Abstracts of Papers of the American Chemical Society, 206, (ORGN), 107-107, (1993)
   

Mallik S et al., Selective recognition of bis-imidazoles by complementary bis-metal ion complexes.
Journal of the American Chemical Society, 115, (6), 2518-2520, (1993)
   

Mallik S et al., Synthetic bis-metal ion receptors for bis-imidazole protein analogs.
Journal of the American Chemical Society, 116, (20), 8902-8911, (1994)
   

Mallik S et al., Towards materials for the specific recognition and separation of proteins.
New Journal of Chemistry, 18, 299-304, (1994)
   

Mallouk TE

Johnson SA et al., Ordered mesoporous polymers of tunable pore size from colloidal silica templates.
Science, 283, (5404), 963-965, (1999)
   

Malm B

Malm B et al., Characterization of molecularly imprinted polymer nanoparticles by photon correlation spectroscopy.
Journal of Molecular Recognition, 27, (12), 714-721, (2014)
   

Malone E

Kinsella B et al., Current trends in sample preparation for growth promoter and veterinary drug residue analysis.
Journal of Chromatography A, 1216, (46), 7977-8015, (2009)
   

Malosse L

Malosse L et al., Novel Stoichiometric, Noncovalent Pinacolyl Methylphosphonate Imprinted Polymers: A Rational Design by NMR Spectroscopy.
Macromolecules, 41, (21), 7834-7842, (2008)
   

Malosse L et al., Detection of degradation products of chemical warfare agents by highly porous molecularly imprinted microspheres.
Analyst, 133, (5), 588-595, (2008)
   

Maloumi Z

Mobram M et al., Study the Sensory Effects of Toxic Compounds of Benzimidazoles by Conductometry.
Bulletin of Environment, Pharmacology and Life Sciences, 5, (12), 1-10, (2016)
   

Malval JP

Gomez LPC et al., Rapid Prototyping of Chemical Microsensors Based on Molecularly Imprinted Polymers Synthesized by Two-Photon Stereolithography.
Advanced Materials, 28, (28), 5931-5937, (2016)
   

Malyshev V

Malyshev V et al., Determination of Asymmetric Dimethylarginine by Using Organic Semiconductor-Based Molecularly Imprinted Polymer Film.
ECS Journal of Solid State Science and Technology, 7, (7), Q3189-Q3195, (2018)
   

Malysheva NN

Kozitsina AN et al., Sensors Based on Bio and Biomimetic Receptors in Medical Diagnostic, Environment, and Food Analysis.
Biosensors, 8, (2), ArticleNo35-(2018)
   

Mamat A

Aihebaier S et al., Membrane-Protected Molecularly Imprinted Polymer for the Microextraction of Indole-3-butyric Acid in Mung Bean Sprouts.
ACS Omega, 4, (16), 16789-16793, (2019)
   

Mamba BB

Mafu LD et al., Ion-imprinted polymers for environmental monitoring of inorganic pollutants: synthesis, characterization, and applications.
Environmental Science and Pollution Research, 20, (2), 790-802, (2013)
   

Mbukwa EA et al., Preparation of guanidinium terminus-molecularly imprinted polymers for selective recognition and solid-phase extraction (SPE) of [arginine]-microcystins.
Analytical and Bioanalytical Chemistry, 405, (12), 4253-4267, (2013)
   

Kibechu RW et al., Synthesis and application of reduced graphene oxide and molecularly imprinted polymers composite in chemo sensor for trichloroacetic acid detection in aqueous solution.
Physics and Chemistry of the Earth, Parts A/B/C, 76-78, 49-53, (2014)
   

Mamba BB et al., Book chapter, Advances in Nanostructured Polymers and Membranes for Removal of Heavy Metals in Water, 
In: Aquananotechnology: Global Prospects, Reisner DE, Pradeep T (Eds.) CRC Press: Boca Raton, Ch. 20, 399-418, (2014)
   

Sikiti P et al., Synthesis and characterization of molecularly imprinted polymers for the remediation of PCBs and dioxins in aqueous environments.
Journal of Environmental Health Science and Engineering, 12, (1), Article No 82-(2014)
   

Mafu LD et al., Synthesis and characterization of ion imprinted polymeric adsorbents for the selective recognition and removal of arsenic and selenium in wastewater samples.
Journal of Saudi Chemical Society, 20, (5), 594-605, (2016)
   

Kibechu R et al., Effect of incorporating graphene oxide and surface imprinting on polysulfone membranes on flux, hydrophilicity and rejection of salt and polycyclic aromatic hydrocarbons from water.
Physics and Chemistry of the Earth, Parts A/B/C, 100, 126-134, (2017)
   

Kibechu RW et al., Graphene-based molecularly imprinted polymer for separation and pre-concentration of trace polycyclic aromatic hydrocarbons in environmental water samples.
Journal of Applied Polymer Science, 134, (37), ArticleNo45300-(2017)
   

Mkhize DS et al., Molecularly imprinted membranes (MIMs) for selective removal of polychlorinated biphenyls (PCBs) in environmental waters: fabrication and characterization.
Environmental Science and Pollution Research, 24, (12), 11694-11707, (2017)
   

Mkhize DS et al., Calibration and field application of a molecularly imprinted membrane-passive sampler for the sampling of indicator polychlorinated biphenyls in selected aquatic environments of South Africa.
Water Science And Technology, 79, (5), 808-819, (2019)
   

Mamipour Z

Mamipour Z et al., Molecularly imprinted polymer grafted on paper and flat sheet for selective sensing and diagnosis: a review.
Microchimica Acta, 188, (8), Article279-(2021)
   

Mammana A

Lauceri R et al., Chiral memory: Induction, amplification, and switching in porphyrin assemblies.
Chirality, 20, (3-4), 411-419, (2008)
   

Mamo G

Asliyuce S et al., Synthesis and use of protein G imprinted cryogel as affinity matrix to purify protein G from cell lyaste.
Journal of Chromatography B, 1021, 204-212, (2016)
   

Mamo MA

Kibechu RW et al., Synthesis and application of reduced graphene oxide and molecularly imprinted polymers composite in chemo sensor for trichloroacetic acid detection in aqueous solution.
Physics and Chemistry of the Earth, Parts A/B/C, 76-78, 49-53, (2014)
   

Letsoalo MR et al., Novel Chemoresistive Sensor for Sensitive Detection of Pb2+ Ions Using an Interdigital Gold Electrode Fabricated with a Reduced Graphene Oxide-Based Ion-Imprinted Polymer.
ACS Omega, 6, (47), 31528-31538, (2021)
   

Mamo SK

Mamo SK, Proceeding, Optimisation and production of a molecular-imprinted-polymer for the electrochemical determination of triacetone triperoxide (TATP), 
Burgess D, Owen G, Rana H, Zamboni R, Kajzar F, Szep AA (Eds.), 925315, (2014)
   

Mamo SK et al., Development of a Molecularly Imprinted Polymer-Based Sensor for the Electrochemical Determination of Triacetone Triperoxide (TATP).
Sensors, 14, (12), 23269-23282, (2014)
   

Mamo SK et al., Computationally Designed Perrhenate Ion Imprinted Polymers for Selective Trapping of Rhenium Ions.
ACS Applied Polymer Materials, 2, (8), 3135-3147, (2020)
   

Man MWC

Moreau JJE et al., The design of selective catalysts from hybrid silica-based materials.
Coordination Chemistry Reviews, 178-180, (2), 1073-1084, (1998)
   

Arrachart G et al., Silylated Melamine and Cyanuric Acid as Precursors for Imprinted and Hybrid Silica Materials with Molecular Recognition Properties.
Chemistry - A European Journal, 15, (25), 6279-6288, (2009)
   

Manabe K

Maebayashi H et al., Proceeding, Synthesis of 4-Hydroxy-2-pyrone Derivatives and Application to Ion Imprinting Polymers, 
(2009)
   

Manabe O

Shinkai S et al., Template synthesis from starch as an approach to tailor-made cyclodextrin.
Tetrahedron Letters, 24, (33), 3501-3504, (1983)
   

Manbohi A

Manbohi A, Proceeding, Electrochemically controlled solid-phase microextraction of sorbate ion based on molecularly imprinted electrosynthesized nanostructure polypyrrole, 
(2011)
   

Manbohi A et al., Nanostructure conducting molecularly imprinted polypyrrole film as a selective sorbent for benzoate ion and its application in spectrophotometric analysis of beverage samples.
Food Chemistry, 155, 186-191, (2014)
   

Mancheño MJ

Gallego-Gallegos M et al., Synthesis of a pH dependent covalent imprinted polymer able to recognize organotin species.
Analyst, 131, (1), 98-105, (2006)
   

Mancin F

Prins LJ et al., Multivalent Cooperative Catalysts.
Current Organic Chemistry, 13, (11), 1050-1064, (2009)
   

Mancini C

Yu JCC et al., Molecularly imprinted polypyrrole encapsulated carbon nanotubes in stainless steel frit for micro solid phase extraction of estrogenic compounds.
Journal of Nanoscience and Nanotechnology, 7, (9), 3095-3103, (2007)
   

Mandaji M

Kist TBL et al., Separation of biomolecules using electrophoresis and nanostructures.
Electrophoresis, 25, (21-22), 3492-3497, (2004)
   

Mandal S

Suriyanarayanan S et al., Electrochemically synthesized molecularly imprinted polythiophene nanostructures as recognition elements for an aspirin-chemosensor.
Sensors and Actuators B: Chemical, 253, 428-436, (2017)
   

Mandani S

Davoodi M et al., CdSe Quantum Dot Nanoparticles: Synthesis and Application in the Development of Molecularly Imprinted Polymer-Based Dual Optical Sensors.
Industrial & Engineering Chemistry Research, 60, (33), 12328-12342, (2021)
   

Mandani S et al., Ultrasensitive electrochemical molecularly imprinted sensor based on AuE/Ag-MOF@MC for determination of hemoglobin using response surface methodology.
Analytical and Bioanalytical Chemistry, 413, (19), 4895-4906, (2021)
   

Mandasari E

Harsini M et al., Melamine selective electrode based on nanoporous carbon/molecularly imprinted polymer.
Journal of Chemical and Pharmaceutical Research, 6, (9), 65-70, (2014)
   

Mandave SV

Patil JS et al., Hydrogel System, a 'Smart' and 'Intelligent' Drug Delivery Device: A Systematic and Concise Review.
Indian Journal of Novel Drug delivery, 6, (2), 93-105, (2014)
   

Mandenius CF

Andersson LI et al., Studies on guest selective molecular recognition on an octadecyl silylated silicon surface using ellipsometry.
Tetrahedron Letters, 29, (42), 5437-5440, (1988)
   

Mandeville WH

Huval CC et al., Novel cholesterol lowering polymeric drugs obtained by molecular imprinting.
Macromolecules, 34, (6), 1548-1550, (2001)
   

Huval CC et al., Book chapter, Molecularly imprinted bile acid sequestrants: Synthesis and biological studies, 
In: Molecularly Imprinted Materials-2003, Kofinas P, Sellergren B, Roberts MJ (Eds.) Materials Research Society: Warrendale, Ch. 13, 85-90, (2004)
   

Mandich A

Maradonna F et al., A developmental hepatotoxicity study of dietary bisphenol A in Sparus aurata juveniles.
Comparative Biochemistry and Physiology Part C: Toxicology & Pharmacology, 166, 1-13, (2014)
   

Mandler D

Shustak G et al., Application of sol-gel technology for electroanalytical sensing.
Electroanalysis, 15, (5-6), 398-408, (2003)
   

Marx S et al., Parathion sensor based on molecularly imprinted sol-gel films.
Analytical Chemistry, 76, (1), 120-126, (2004)
   

Fireman-Shoresh S et al., Chiral electrochemical recognition by very thin molecularly imprinted sol-gel films.
Langmuir, 21, (17), 7842-7847, (2005)
   

Walcarius A et al., Exciting new directions in the intersection of functionalized sol-gel materials with electrochemistry.
Journal of Materials Chemistry, 15, (35-36), 3663-3689, (2005)
   

Ginzburg-Turgeman R et al., Nanometric thin polymeric films based on molecularly imprinted technology: Towards electrochemical sensing applications.
Physical Chemistry Chemical Physics, 12, (36), 11041-11050, (2010)
   

Kraus-Ophir S et al., Nanoparticle-Imprinted Polymers for Size-Selective Recognition of Nanoparticles.
Angewandte Chemie International Edition, 53, (1), 294-298, (2014)
   

Bruchiel-Spanier N et al., Nanoparticle-Imprinted Polymers: Shell-Selective Recognition of Au Nanoparticles by Imprinting Using the Langmuir-Blodgett Method.
ChemElectroChem, 2, (6), 795-802, (2015)
   

Hitrik M et al., Speciation of nanoscale objects by nanoparticle imprinted matrices.
Nanoscale, 8, (29), 13934-13943, (2016)
   

Shahar T et al., Molecularly imprinted polymer particles: Formation, characterization and application.
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 495, 11-19, (2016)
   

Witt J et al., Nanoparticle-Imprinted Matrices as Sensing Layers for Size-Selective Recognition of Silver Nanoparticles.
ChemElectroChem, 3, (12), 2116-2124, (2016)
   

Shahar T et al., Nanosphere molecularly imprinted polymers doped with gold nanoparticles for high selectivity molecular sensors.
Nano Research, 10, (3), 1056-1063, (2017)
   

Bruchiel-Spanier N et al., Electrochemically Deposited Sol-Gel Based Nanoparticle-Imprinted Matrices for the Size-Selective Detection of Gold Nanoparticles.
ACS Applied Nano Materials, 1, (10), 5612-5619, (2018)
   

Shahar T et al., Core-shell nanoparticles for gas phase detection based on silver nanospheres coated with a thin molecularly imprinted polymer adsorbed on a chemiresistor.
Nanoscale, 10, (37), 17593-17602, (2018)
   

Bruchiel-Spanier N et al., Effect of matrix-nanoparticle interactions on recognition of aryldiazonium nanoparticle-imprinted matrices.
Nano Research, 12, (2), 265-271, (2019)
   

Zelikovich D et al., Shell-Matrix Interaction in Nanoparticle-Imprinted Matrices: Implications for Selective Nanoparticle Detection and Separation.
ACS Applied Nano Materials, 4, (10), 10819-10827, (2021)
   

Mandrah K

Khan S et al., Selective solid-phase extraction using molecularly imprinted polymer as a sorbent for the analysis of fenarimol in food samples.
Food Chemistry, 199, 870-875, (2016)
   

Mandumy N

Hashemi B et al., Synthesis and characterization of ion imprinted polymeric nanoparticles for selective extraction and determination of mercury ions.
Analytical Methods, 7, (22), 9641-9648, (2015)
   

Maneewas S

Piacham T et al., Synthesis and Theoretical Study of Molecularly Imprinted Nanospheres for Recognition of Tocopherols.
Molecules, 14, (8), 2985-3002, (2009)
   

Manesiotis P

Hall AJ et al., Proceeding, Molecularly imprinted polymers (MIPs) against uracils: Functional monomer design, monomer-template interactions in solution and MIP performance in chromatography, 
Shea KJ, Yan M, Roberts MJ, Cremer PS, Crooks RM, Sailor MJ (Eds.), 11-15, (2002)
   

Theodoridis G et al., Selective solid-phase extraction sorbent for caffeine made by molecular imprinting.
Journal of Chromatography A, 948, (1-2), 163-169, (2002)
   

Hall AJ et al., A substructure approach toward polymeric receptors targeting dihydrofolate reductase inhibitors. 2. Molecularly imprinted polymers against Z-L-glutamic acid showing affinity for larger molecules.
Journal of Organic Chemistry, 68, (23), 9132-9135, (2003)
   

Theodoridis G et al., Preparation of a molecularly imprinted polymer for the solid-phase extraction of scopolamine with hyoscyamine as a dummy template molecule.
Journal of Chromatography A, 987, (1-2), 103-109, (2003)
   

Manesiotis P et al., An enantioselective imprinted receptor for Z-glutamate exhibiting a binding induced color change.
Chemical Communications, (20), 2278-2279, (2004)
   

Hall AJ et al., Urea host monomers for stoichiometric molecular imprinting of oxyanions.
Journal of Organic Chemistry, 70, (5), 1732-1736, (2005)
   

Hall AJ et al., Non-covalent imprinting of phosphorous esters.
Analytica Chimica Acta, 538, (1-2), 9-14, (2005)
   

Hall AJ et al., Erratum to "Non-covalent imprinting of phosphorous esters": [Analytica Chimica Acta 538 (2005) 9-14].
Analytica Chimica Acta, 540, (2), 417-417, (2005)
   

Manesiotis P et al., Improved imide receptors by imprinting using pyrimidine-based fluorescent reporter monomers.
Journal of Organic Chemistry, 70, (7), 2729-2738, (2005)
   

Manesiotis P et al., An artificial riboflavin receptor prepared by a template analogue imprinting strategy.
Angewandte Chemie International Edition, 44, (25), 3902-3906, (2005)
   

Hall AJ et al., Polymeric Receptors for the Recognition of Folic Acid and Related Compounds via Substructure Imprinting.
Analytical Chemistry, 78, (24), 8362-8367, (2006)
   

Michailof C et al., Synthesis of caffeic acid and p-hydroxybenzoic acid molecularly imprinted polymers and their application for the selective extraction of polyphenols from olive mill waste waters.
Journal of Chromatography A, 1182, (1), 25-33, (2008)
   

Manesiotis P et al., Water-compatible imprinted polymers for selective depletion of riboflavine from beverages.
Journal of Materials Chemistry, 19, (33), 6185-6193, (2009)
   

Theodoridis GA et al., Book chapter, Affinity Chromatography: Molecularly Imprinted Polymers, 
In: Encyclopedia of Chromatography, Third Edition, Cazes J (Ed.) Taylor & Francis: 24-30, (2009)
   

Borrelli C et al., Selective Depletion of Riboflavine from Beer Using Membranes Incorporating Imprinted Polymer Particles.
Journal of Food Processing and Preservation, 35, (1), 112-128, (2011)
   

Manesiotis P et al., An enantio-selective chromatographic stationary phase for S-ibuprofen prepared by stoichiometric molecular imprinting.
Journal of Materials Chemistry, 22, (22), 11201-11207, (2012)
   

Manesiotis P et al., Book chapter, 4.20 - Applications of SPE-MIP in the Field of Food Analysis, 
In: Comprehensive Sampling and Sample Preparation, Pawliszyn J (Ed.) Academic Press: Oxford, Ch. 20, 457-471, (2012)
   

Bowen JL et al., Twenty years since 'antibody mimics' by molecular imprinting were first proposed: A critical perspective.
Molecular Imprinting, 1, (1), 35-40, (2013)
   

Fitzhenry L et al., Molecularly imprinted polymers for corticosteroids: impact of polymer format on recognition behaviour.
Microchimica Acta, 180, (15-16), 1421-1431, (2013)
   

Manesiotis P et al., Molecularly imprinted polymers for the extraction of imiquimod from biological samples using a template analogue strategy.
Analytical Methods, 5, (12), 3122-3128, (2013)
   

Tsermentseli SK et al., Molecularly imprinted polymers for the isolation of bioactive naphthoquinones from plant extracts.
Journal of Chromatography A, 1315, 15-20, (2013)
   

Krstulja A et al., Artificial receptors for the extraction of nucleoside metabolite 7-methylguanosine from aqueous media made by molecular imprinting.
Journal of Chromatography A, 1365, 12-18, (2014)
   

Manesiotis P et al., Polymerisable squaramide receptors for anion binding and sensing.
Journal of Materials Chemistry C, 2, (42), 8990-8995, (2014)
   

Hasanah AN et al., Tetrabutylammonium methacrylate as a novel receptor for selective extraction of sulphonylurea drugs from biological fluids using molecular imprinting.
Journal of Materials Chemistry B, 3, (43), 8577-8583, (2015)
   

Bole AL et al., Advanced Materials for the Recognition and Capture of Whole Cells and Microorganisms.
Advanced Materials, 28, (27), 5349-5366, (2016)
   

dos Santos PM et al., Stoichiometric molecularly imprinted polymers for the recognition of anti-cancer pro-drug tegafur.
Journal of Chromatography B, 1021, 197-203, (2016)
   

Manesiotis P et al., Affinity-based separations in bioanalysis (Preface).
Journal of Chromatography B, 1021, 1-2, (2016)
   

Pessagno F et al., Molecularly imprinted 'traps' for sulfonylureas prepared using polymerisable ion pairs.
RSC Advances, 8, (26), 14212-14220, (2018)
   

Cavalera S et al., Stoichiometric molecular imprinting using polymerisable urea and squaramide receptors for the solid phase extraction of organo-arsenic compound roxarsone.
Analytical Methods, 12, (47), 5729-5736, (2020)
   

Lettieri S et al., A novel Hamilton receptor monomer for the stoichiometric molecular imprinting of barbiturates.
Reactive and Functional Polymers, 167, Article105031-(2021)
   

Mangadlao JD

Vergara AV et al., Capacitive Detection of Morphine via Cathodically Electropolymerized, Molecularly Imprinted Poly(p-aminostyrene) Films.
Macromolecular Chemistry And Physics, 217, (16), 1810-1822, (2016)
   

Mangala B

Das TR et al., Book chapter, Metal-Organic Framework-Based Artificial Antibodies for Sensing Applications, 
In: Metal-Organic Frameworks for Environmental Sensing, Kumar SS, Ghosh P, Singh L (Eds.) American Chemical Society: Washington DC, Ch. 6, 155-175, (2021)
   

Mangelings D

Mangelings D et al., Enantioselective capillary electrochromatography: Recent developments and new trends.
Electrophoresis, 32, (19), 2583-2601, (2011)
   

Declerck S et al., Enantioseparations of pharmaceuticals with capillary electrochromatography: A review.
Journal of Pharmaceutical and Biomedical Analysis, 130, (Review Issue 2016), 81-99, (2016)
   

Mangeney C

Griffete N et al., Introduction of a planar defect in a molecularly imprinted photonic crystal sensor for the detection of bisphenol A.
Journal of Colloid and Interface Science, 364, (1), 18-23, (2011)
   

Mahouche-Chergui S et al., Aryl diazonium salts: a new class of coupling agents for bonding polymers, biomacromolecules and nanoparticles to surfaces.
Chemical Society Reviews, 40, (7), 4143-4166, (2011)
   

Griffete N et al., Inverse Opals of Molecularly Imprinted Hydrogels for the Detection of Bisphenol A and pH Sensing.
Langmuir, 28, (1), 1005-1012, (2012)
   

Griffete N et al., Magnetic nanocrystals coated by molecularly imprinted polymers for the recognition of bisphenol A.
Journal of Materials Chemistry, 22, (5), 1807-1811, (2012)
   

Ahmad R et al., Nanocomposites of Gold Nanoparticles@Molecularly Imprinted Polymers: Chemistry, Processing, and Applications in Sensors.
Chemistry of Materials, 27, (16), 5464-5478, (2015)
   

Ahmad R et al., Water-soluble plasmonic nanosensors with synthetic receptors for label-free detection of folic acid.
Chemical Communications, 51, (47), 9678-9681, (2015)
   

Gam-Derouich S et al., Quantum dot-imprinted polymers with size and shell-selective recognition properties.
Chemical Communications, 51, 14933-14936, (2015)
   

Gam-Derouich S et al., Correction: Quantum dot-imprinted polymers with size and shell-selective recognition properties.
Chemical Communications, (2015)
   

Gam-Derouich S et al., Proceeding, Imprinted polymers and photonic crystals for sensing of molecules and nanoparticles, 
1-4, (2016)
   

Gam-Derouich S et al., Imprinted Photonic Hydrogels for the Size- and Shell-Selective Recognition of Nanoparticles.
Angewandte Chemie International Edition, 56, (33), 9710-9714, (2017)
   

Mangia A

Bianchi F et al., Solid-phase microextraction of 2, 4, 6-trinitrotoluene using a molecularly imprinted-based fiber.
Analytical and Bioanalytical Chemistry, 403, (8), 2411-2418, (2012)
   

Mangiarotti L

Bossi A et al., Patterned gallium surfaces as molecular mirrors.
Biosensors and Bioelectronics, 23, (2), 290-294, (2007)
   

Mani A

Anirudhan TS et al., Molecularly imprinted electrochemical sensing platform for 2-Aminoadipic acid, a diabetes biomarker.
Reactive and Functional Polymers, 168, Article105056-(2021)
   

Mani KS

Antwi-Boampong S et al., A selective molecularly imprinted polymer-carbon nanotube sensor for cotinine sensing.
Journal of Molecular Recognition, 27, (1), 57-63, (2014)
   

Mani V

Lahcen AA et al., Laser-scribed graphene sensor based on gold nanostructures and molecularly imprinted polymers: Application for Her-2 cancer biomarker detection.
Sensors and Actuators B: Chemical, 347, Article130556-(2021)
   

Manickam P

Manickam P et al., Antibody-Free Electrochemical Detection of Cortisol Using Molecularly Imprinted Polymer.
ECS Meeting Abstracts, MA2015-01, (40), 2111-2111, (2015)
   

Manickam P et al., A Reusable Electrochemical Biosensor for Monitoring of Small Molecules (Cortisol) Using Molecularly Imprinted Polymers.
Journal of The Electrochemical Society, 164, (2), B54-B59, (2017)
   

Manickam P et al., Theoretical Studies of Cortisol-Imprinted Prepolymerization Mixtures: Structural Insights into Improving the Selectivity of Affinity Sensors.
Journal of The Electrochemical Society, 164, (5), B3077-B3080, (2017)
   

Maniglio D

Cennamo N et al., Deformable molecularly imprinted nanogels permit sensitivity-gain in plasmonic sensing.
Biosensors and Bioelectronics, 156, Article112126-(2020)
   

Bossi AM et al., Molecularly Imprinted Silk Fibroin Nanoparticles.
ACS Applied Materials & Interfaces, 13, (27), 31431-31439, (2021)
   

Manik MER

Pratama KF et al., Effect of the Molecularly Imprinted Polymer Component Ratio on Analytical Performance.
Chemical and Pharmaceutical Bulletin, 68, (11), 1013-1024, (2020)
   

Maniscalco V

Pestov D et al., Molecularly imprinted polymers for SAW sensors.
unknown source, (2002)
   

Pestov D et al., Molecular imprinting using monomers with solid-state polymerization.
Analytica Chimica Acta, 504, (1), 31-35, (2004)
   

Manisha K

Dhanashree S et al., Molecularly Imprinted Polymers: Novel Discovery for Drug Delivery.
Current Drug Delivery, 13, (5), 632-645, (2016)
   

Manju S

Manju S et al., Fluorescent molecularly imprinted polymer film binds glucose with a concomitant changes in fluorescence.
Biosensors and Bioelectronics, 26, (2), 894-897, (2010)
   

Mankar JS

Korde BA et al., Nanoporous imprinted polymers (nanoMIPs) for controlled release of cancer drug.
Materials Science and Engineering: C, 99, 222-230, (2019)
   

Manmana Y

Chen L et al., Synthesis, characterization, and theoretical study of an acrylamide-based magnetic molecularly imprinted polymer for the recognition of sulfonamide drugs.
E-Polymers, 15, (3), 141-150, (2015)
   

Mann B

Lata K et al., Synthesis and application of cephalexin imprinted polymer for solid phase extraction in milk.
Food Chemistry, 184, 176-182, (2015)
   

Mann KJ

Dickert FL et al., Proceeding, Parallel-Processing of Chemically Sensitive Layers by Self-Assembling - Structuring of Bulk Materials and Surfaces, 
135-141, (2003)
   

Dickert FL et al., Chemical sensors - from molecules, complex mixtures to cells - supramolecular imprinting strategies.
Sensors, 3, (9), 381-392, (2003)
   

Dickert FL et al., Proceeding, Selfassembling around templates - Creating nano dots and pits for chemical sensing, 
Velev OD, Bunning TJ, Xia Y, Yang P (Eds.), 37-42, (2003)
   

Hayden O et al., Mass-sensitive detection of cells, viruses and enzymes with artificial receptors.
Sensors and Actuators B: Chemical, 91, (1-3), 316-319, (2003)
   

Dickert FL et al., Modifying polymers by self-organisation for the mass-sensitive detection of environmental and biogeneous analytes.
Sensors and Actuators B: Chemical, 100, (1-2), 112-116, (2004)
   

Dickert FL et al., Synthetic receptors for chemical sensors - subnano- and micrometre patterning by imprinting techniques.
Biosensors and Bioelectronics, 20, (6), 1040-1044, (2004)
   

Dickert FL et al., Bioimprinted QCM sensors for virus detection - screening of plant sap.
Analytical and Bioanalytical Chemistry, 378, (8), 1929-1934, (2004)
   

Hayden O et al., Biomimetic ABO Blood-Group Typing.
Angewandte Chemie International Edition, 45, (16), 2626-2629, (2006)
   

Mann S

Dujardin E et al., Synthesis of mesoporous silica by sol-gel mineralisation of cellulose nanorod nematic suspensions.
Journal of Materials Chemistry, 13, (4), 696-699, (2003)
   

Mann S et al., Pressure-Stable Imprinted Polymers for Waste Water Remediation.
Polymers, 10, (7), ArticleNo704-(2018)
   

Manna AK

Manna AK, Supramolecular Chemistry-Concepts and Applications.
International Journal of Science and Research (IJSR), 4, (4), PaperID:29031502-(2015)
   

Manna J

Manna J et al., Oxyanion-Binding in a Bioinspired Nanoparticle-Assembled Hybrid Microsphere Structure: Effective Removal of Arsenate/Chromate From Water.
ACS Applied Nano Materials, 2, (3), 1525-1532, (2019)
   

Manno D

Picca RA et al., Book chapter, Synthesis and Characterization of Imprinted TiO2 Nanoparticles: Preliminary results, 
In: Sensors And Microsystems, Siciliano P, Capone S, Di Natale C, D'Amico A (Eds.) World Scientific: 287-291, (2008)
   

Manns A

Vaidya A et al., Altering glucose oxidase to oxidize D-galactose through crosslinking of imprinted protein.
ChemBioChem, 5, (1), 132-135, (2004)
   

Mannschreck A

Burgemeister T et al., On the chemistry of binding-sites .1. Fast thermal breaking and formation of a B-N bond in 2-(aminomethyl)benzeneboronates.
Chemische Berichte-Recueil, 114, 3403-3411, (1981)
   

Mano V

da Silva RCS et al., Development of pipette tip-based on molecularly imprinted polymer micro-solid phase extraction for selective enantioselective determination of (-)-(2S, 4R) and (+)-(2R, 4S) ketoconazole in human urine samples prior to HPLC-DAD.
Analytical Methods, 8, (20), 4075-4085, (2016)
   

Manoochehri M

Manoochehri M et al., Synthesis and Evaluation of Ion Imprinted Mercapto-Functionalized Nano Alumina as a Selective Sorbent for Nd(III) Removal from Water Samples.
World Applied Sciences Journal, 19, (2), 215-222, (2012)
   

Manoochehri M et al., Synthesize of Ion Imprinted Polymer for Selective Extraction of lead (II) from Environmental Water Samples.
Journal of Applied Chemical Research, 7, (1), 43-49, (2013)
   

Manovic V

Nabavi SA et al., Production of spherical mesoporous molecularly imprinted polymer particles containing tunable amine decorated nanocavities with CO2 molecule recognition properties.
Chemical Engineering Journal, 306, 214-225, (2016)
   

Nabavi SA et al., Production of molecularly imprinted polymer particles with amide-decorated cavities for CO2 capture using membrane emulsification/suspension polymerisation.
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 521, 231-238, (2017)
   

Nabavi SA et al., Synthesis of Size-Tunable CO2-Philic Imprinted Polymeric Particles (MIPs) for Low-Pressure CO2 Capture Using Oil-in-Oil Suspension Polymerization.
Environmental Science & Technology, 51, (19), 11476-11483, (2017)
   

Hanak DP et al., Techno-economic feasibility assessment of CO2 capture from coal-fired power plants using molecularly imprinted polymer.
Fuel, 214, 512-520, (2018)
   

Manríquez R

Quirarte-Escalante CA et al., Synthesis of Hybrid Adsorbents Combining Sol-Gel Processing and Molecular Imprinting Applied to Lead Removal from Aqueous Streams.
Chemistry of Materials, 21, (8), 1439-1450, (2009)
   

Manso CMCP

Ciuffi KJ et al., Polymeric organic-inorganic hybrid material containing iron(III) porphyrin using sol-gel process.
Journal of Non-Crystalline Solids, 247, (1-3), 146-152, (1999)
   

Mansoori B

Seidi K et al., Nanomagnet-Based Detoxifying Machine: An Alternative/Complementary Approach in HIV therapy.
AIDS & Clinical Research, 5, (5), Article 304-(2014)
   

Mansour M

Hassan S et al., Synthesis and Characterization of Molecularly Imprinted Nanoparticle Polymers for Selective Separation of Anthracene.
Journal of Dispersion Science and Technology, 37, (9), 1241-1251, (2016)
   

Mansour MS

Hassan SSM et al., Quercetin Recovery from Onion Solid Waste via Solid-Phase Extraction Using Molecularly Imprinted Polymer Nanoparticles.
International Journal of Food Engineering, 15, (1-2), Article20170024-(2019)
   

Mansour MSM

Mansour MSM et al., Valorization of food solid waste by recovery of polyphenols using hybrid molecular imprinted membrane.
Journal of Environmental Chemical Engineering, 6, (4), 4160-4170, (2018)
   

Mansour SZ

Hegazy EA et al., Radiation Synthesis and Characterization of Cholesterol Molecularly Imprinted Polymer of Crosslinked Hydroxyethyl Methacrylate.
International Journal of Science and Research (IJSR), 5, (1), ArticleID:NOV152733-(2016)
   

Mansouri E

Mansouri E et al., Preparation and Characterization of Herbicide Mecoprop Imprinted Polymer and Its Application as a Selective Sorbent in Water Sample.
Bulletin of Environmental Contamination and Toxicology, 101, (5), 657-663, (2018)
   

Mansouri G

Abbasi S et al., Synthesis and application of ion-imprinted polymer nanoparticles for the determination of nickel ions.
Spectrochimica Acta Part A-Molecular and Biomolecular Spctroscopy, 140, 534-543, (2015)
   

Mansson MO

Ståhl M et al., Bio-imprinting changes the stereospecificity of l-amino-acid oxidase from crotalus-adamanteus in organic-solvents.
Protein Engineering, 6, (Supplement), 51-51, (1993)
   

Johansson A et al., Horse liver alcohol-dehydrogenase can accept NADP+ as coenzyme in high-concentrations of acetonitrile.
European Journal of Biochemistry, 227, (1-2), 551-555, (1995)
   

Ye L et al., A new application of molecularly imprinted materials.
Journal of Molecular Recognition, 11, (1-6), 75-78, (1998)
   

Ye L et al., Use of molecularly imprinted polymers in a biotransformation process.
Biotechnology and Bioengineering, 64, (6), 650-655, (1999)
   

Mansuy D

Scheller FW et al., Book chapter, New recognition elements in biosensing, 
In: Enzyme Engineering XIV, Laskin AI, Li GX, Yu YT (Eds.) New York Academy of Sciences: New York, 37-45, (1998)
   

Manthorpe JM

Alenazi NA et al., Enhanced selectivity of a molecularly imprinted polymer toward the target molecule via esterification of non-specific binding sites with diazomethane.
Journal of Molecular Recognition, 27, (12), 755-762, (2014)
   

Alenazi NA et al., Selective extraction of BPA in milk analysis by capillary electrophoresis using a chemically modified molecularly imprinted polymer.
Food Control, 50, 778-783, (2015)
   

Manthorpe MJ

Alenazi NA et al., Selectivity Enhancement in Molecularly Imprinted Polymers for Binding of Bisphenol A.
Sensors, 16, (10), ArticleNo1697-(2016)
   

Mantovani G

Magennis EP et al., Bacteria-instructed synthesis of polymers for self-selective microbial binding and labelling.
Nature Materials, 13, (7), 748-755, (2014)
   

Manzi P

Ritota M et al., Melamine Detection in Milk and Dairy Products: Traditional Analytical Methods and Recent Developments.
Food Analytical Methods, 11, (1), 128-147, (2018)
   

Manzo V

Manzo V et al., A molecularly imprinted polymer as the sorptive phase immobilized in a rotating disk extraction device for the determination of diclofenac and mefenamic acid in wastewater.
Analytica Chimica Acta, 889, 130-137, (2015)
   

Manzoor I

Motib A et al., Modulation of Quorum Sensing in a Gram-Positive Pathogen by Linear Molecularly Imprinted Polymers with Anti-infective Properties.
Angewandte Chemie International Edition, 56, (52), 16555-16558, (2017)
   

Manzoor S

Manzoor S et al., Molecularly imprinted solid phase extraction of fluconazole from pharmaceutical formulations.
Talanta, 134, 1-7, (2015)
   

Manzoor S et al., A new synthetic route to molecularly imprinted ORMOSIL: Characterization and evaluation.
Separation Science and Technology, 53, (6), 877-886, (2018)
   

Manzoori JL

Amjadi M et al., A sensitive fluorescent nanosensor for chloramphenicol based on molecularly imprinted polymer-capped CdTe quantum dots.
Luminescence, 31, (3), 633-639, (2016)
   

Mao BP

Mao BP et al., Determination of triazine residues in herbal plants using molecularly imprinted polymer extraction followed by UPLC-MS/MS.
Analytical Methods, 5, (14), 3582-3590, (2013)
   

Mao CY

Mao CY et al., The controlled drug release by pH-sensitive molecularly imprinted nanospheres for enhanced antibacterial activity.
Materials Science and Engineering: C, 77, 84-91, (2017)
   

Mao HC

Tian DY et al., Synthesis, Characterization and Adsorption Behavior of Cd(II) Ion-Imprinted Mesoporous Materials.
Science of Advanced Materials, 10, (3), 324-330, (2018)
   

Mao HJ

Yu HC et al., Preparation and Application of Phenobarbital Electrochemical Sensor Based on Molecular Imprinted Technique and Electropolymerization Membrane.
Journal of Instrumental Analysis, 33, (7), 752-757, (2014)
   

Mao HL

Gao S et al., Highly Integrated Cell-Imprinted Biomimetic Interface for All-in-One Diagnosis of Heterogeneous Circulating Tumor Cells.
ACS Applied Materials & Interfaces, 13, (17), 19603-19612, (2021)
   

Mao HP

Wang X et al., Preparation of magnetic imprinted polymer particles via microwave heating initiated polymerization for selective enrichment of 2-amino-4-nitrophenol from aqueous solution.
Chemical Engineering Journal, 178, (1), 85-92, (2011)
   

Mao J

Chen Y et al., Preparation and application of hollow molecularly imprinted polymers with a super-high selectivity to the template protein.
Journal of Separation Science, 36, (20), 3449-3456, (2013)
   

Huang MJ et al., Adsorption and degradation of norfloxacin by a novel molecular imprinting magnetic Fenton-like catalyst.
Chinese Journal of Chemical Engineering, 23, (10), 1698-1704, (2015)
   

Lin S et al., Selective recovery of Pd(II) from extremely acidic solution using ion-imprinted chitosan fiber: Adsorption performance and mechanisms.
Journal of Hazardous Materials, 299, 10-17, (2015)
   

Wu XH et al., Recognizing removal of norfloxacin by novel magnetic molecular imprinted chitosan/[gamma]-Fe2O3 composites: Selective adsorption mechanisms, practical application and regeneration.
Separation and Purification Technology, 165, 92-100, (2016)
   

Mao JH

Lu YC et al., Preparation of core-shell magnetic molecularly imprinted polymer nanoparticle for the rapid and selective enrichment of trace diuron from complicated matrices.
Ecotoxicology and Environmental Safety, 177, 66-76, (2019)
   

Lu YC et al., A novel strategy for selective removal and rapid collection of triclosan from aquatic environment using magnetic molecularly imprinted nano-polymers.
Chemosphere, 238, Article124640-(2020)
   

Mao K

Zhang WL et al., Performance evaluation and application of surface-molecular-imprinted polymer-modified TiO2 nanotubes for the removal of estrogenic chemicals from secondary effluents.
Environmental Science and Pollution Research, 20, (3), 1431-1440, (2013)
   

Wu YB et al., Selective Removal of Perfluorooctanoic Acid Using Molecularly Imprinted Polymer-Modified TiO2 Nanotube Arrays.
International Journal of Photoenergy, 2016, ArticleID7368795-(2016)
   

Mao L

Tian HX et al., Preparation of a pinoresinol diglucoside imprinted polymer using metal organic frame as the matrix for extracting target compound from Eucommia ulmoides.
Separation Science and Technology, 56, (18), 3136-3150, (2021)
   

Mao LB

Mao LB et al., A synergistic approach to enhance the photoelectrochemical performance of carbon dots for molecular imprinting sensors.
Nanoscale, 11, (16), 7885-7892, (2019)
   

Mao LB et al., Molecularly imprinted photoelectrochemical sensor for fumonisin B1 based on GO-CdS heterojunction.
Biosensors and Bioelectronics, 127, 57-63, (2019)
   

Mao LB et al., Organic-inorganic nanoparticles molecularly imprinted photoelectrochemical sensor for [alpha]-solanine based on p-type polymer dots and n-CdS heterojunction.
Analytica Chimica Acta, 1059, 94-102, (2019)
   

Mao LG

Liu X et al., Electrochemical Sensor based on Imprinted Sol-Gel Polymer on Au NPs-MWCNTs-CS Modified Electrode for the Determination of Acrylamide.
Food Analytical Methods, 9, (1), 114-121, (2016)
   

Mao M

Yang KG et al., Molecularly imprinted polyethersulfone microspheres for the binding and recognition of bisphenol A.
Analytica Chimica Acta, 546, (1), 30-36, (2005)
   

Chen FF et al., A dual-step immobilization/imprinting approach to prepare magnetic molecular imprinted polymers for selective removal of human serum albumin.
Talanta, 209, Article120509-(2020)
   

Mao SQ

Shen HY et al., Highly selective amino-functionalized magnetic molecularly imprinted polymers: absorbents for dispersive solid phase extraction and trace level analysis of chlorophenols in seawater.
RSC Advances, 6, (84), 81330-81340, (2016)
   

Mao SZ

Liu L et al., Functional Mimicry of the Active Site of Glutathione Peroxidase by Glutathione Imprinted Selenium-Containing Protein.
Biomacromolecules, 9, (1), 363-368, (2008)
   

Mao WX

Che HL et al., Prepare molecularly imprinting polymer microsphere of the malachite green.
Chinese Journal of Health Laboratory Technology, 16, (11), 1285-1287, (2006)
   

Mao X

Lin Y et al., Protein recognition via molecularly imprinted agarose gel membrane.
Journal of Biomedical Materials Research Part A, 85A, (3), 573-581, (2008)
   

Feng HB et al., Influence of gelling properties on protein imprinted agarose gel membrane.
Journal of Applied Polymer Science, 131, (11), Article No 40323-(2014)
   

Mao XA

Mao XA et al., Recent Progress in Protein Imprinting Technology.
Recent Patents on Nanotechnology, 4, (2), 85-99, (2010)
   

Mao XD

Mao XD et al., Well-defined sulfamethazine-imprinted magnetic nanoparticles via surface-initiated atom transfer radical polymerization for highly selective enrichment of sulfonamides in food samples.
Analytical Methods, 7, (11), 4708-4716, (2015)
   

Mao XH

Mao BP et al., Determination of triazine residues in herbal plants using molecularly imprinted polymer extraction followed by UPLC-MS/MS.
Analytical Methods, 5, (14), 3582-3590, (2013)
   

Mao XJ

Xiong HH et al., A magnetic hydrophilic molecularly imprinted material with multiple stimuli-response properties for efficient recognition of bisphenol A in beverages.
Food Chemistry, 331, Article127311-(2020)
   

Feng L et al., Study on the preparation of molecular imprinted polymer for analysis of N-phenylglycine in human urine.
Journal of Chromatography B, 1182, Article122918-(2021)
   

Xiong HH et al., Thermosensitive and magnetic molecularly imprinted polymers for selective recognition and extraction of aristolochic acid I.
Food Chemistry, 372, Article131250-(2022)
   

Mao XM

Hu J et al., Recognition of proteins and peptides: Rational development of molecular imprinting technology.
Polymer Science Series A, 52, (3), 328-339, (2010)
   

Mao XQ

Huang XD et al., Preparation of Molecularly Imprinted Chiral Monolithic Column and Its Applications for Separation of Diastereomers.
Chinese Journal of Chromatography, 20, (5), 436-438, (2002)
   

Mao Y

Mao Y et al., Theory of chiral imprinting.
Physical Review Letters, 84, (23), 5335-5338, (2000)
   

Mao Y et al., Imprinted networks as chiral pumps.
Physical Review Letters, 86, (23), 5309-5312, (2001)
   

Burridge DJ et al., Chiral-mechanical transitions in topologically imprinted elastomers.
Physical Review E, 72, (5), (2005)
   

Burridge DJ et al., Mechanical strains and electric fields applied to topologically imprinted elastomers.
Physical Review E, 74, (2), Article Number 021708-(2006)
   

Mao Y et al., Electrochemical sensor for dopamine based on a novel graphene-molecular imprinted polymers composite recognition element.
Biosensors and Bioelectronics, 28, (1), 291-297, (2011)
   

Mao Y et al., Efficient one-pot synthesis of molecularly imprinted silica nanospheres embedded carbon dots for fluorescent dopamine optosensing.
Biosensors and Bioelectronics, 38, (1), 55-60, (2012)
   

Zhou ZY et al., Green preparation of d-tryptophan imprinted self-supported membrane for ultrahigh enantioseparation of racemic tryptophan.
RSC Advances, 6, (111), 109992-110000, (2016)
   

Zhou ZY et al., Green preparation and selective permeation of d-Tryptophan imprinted composite membrane for racemic tryptophan.
Chemical Engineering Journal, 310, (Part 1), 63-71, (2017)
   

Jia L et al., Electrochemical switch sensor toward ephedrine hydrochloride determination based on molecularly imprinted polymer/nafion-MWCNTs modified electrode.
Microchemical Journal, 164, Article105981-(2021)
   

Mao YH

Cao YC et al., A core-shell molecularly imprinted optical sensor based on the upconversion nanoparticles decorated with Zinc-based metal-organic framework for selective and rapid detection of octopamine.
Sensors and Actuators B: Chemical, 326, Article128838-(2021)
   

Mao YL

Fa HB et al., Molecularly imprinted polymeric microspheres with metalloporphyrin-based molecular recognition sites coassembled with methacrylic acid.
High Performance Polymers, 25, (7), 790-797, (2013)
   

Mao YL et al., Synthesis of surface imprinted polymer upon modified kaolinite and study on the selective adsorption of BPA.
Desalination and Water Treatment, 57, (9), 3947-3956, (2016)
   

Mao YL et al., Fabrication of highly selective molecularly imprinted membranes for the selective adsorption of methyl salicylate from salicylic acid.
RSC Advances, 6, (94), 91659-91668, (2016)
   

Mao YL et al., Selective separation of bifenthrin by pH-sensitive/magnetic molecularly imprinted polymers prepared by pickering emulsion polymerization.
Fibers and Polymers, 17, (10), 1531-1539, (2016)
   

Mao YL et al., Selective Recognition of Ciprofloxacin from Aqueous Solution by Molecularly Imprinted Polymers Based on Magnetic Illite.
Chinese Journal of Analytical Chemistry, 44, (6), 915-922, (2016)
   

Mao YL et al., Selective Adsorption and Separation of Ciprofloxacin by Molecularly Imprinted Polymers Based on Magnetic Kaolinite Composites.
Chinese Journal of Inorganic Chemistry, 33, (1), 81-88, (2017)
   

Mao ZW

Wang H et al., Determination of penicillin residues in milk by molecular imprinting technology.
China Dairy Industry, 36, (6), 58-61, (2008)
   

Zhao M et al., Insights into metalloenzyme microenvironments: biomimetic metal complexes with a functional second coordination sphere.
Chemical Society Reviews, 42, (21), 8360-8375, (2013)
   

Maouche N

Gam-Derouich S et al., Aryl diazonium salt surface chemistry and ATRP for the preparation of molecularly imprinted polymer grafts on gold substrates.
Surface And Interface Analysis, 42, (6-7), 1050-1056, (2010)
   

Maouche N et al., Molecularly imprinted polypyrrole films: Some key parameters for electrochemical picomolar detection of dopamine.
Journal of Electroanalytical Chemistry, 685, 21-27, (2012)
   

Maouche N et al., A surface acoustic wave sensor functionalized with a polypyrrole molecularly imprinted polymer for selective dopamine detection.
Journal of Molecular Recognition, 28, (11), 667-678, (2015)
   

Ait-Touchente Z et al., Zinc Oxide Nanorods Wrapped with Ion-Imprinted Polypyrrole Polymer for Picomolar Selective and Electrochemical Detection of Mercury II Ions.
Proceedings, 2, (13), Article1004-(2018)
   

Maradonna F

Maradonna F et al., A developmental hepatotoxicity study of dietary bisphenol A in Sparus aurata juveniles.
Comparative Biochemistry and Physiology Part C: Toxicology & Pharmacology, 166, 1-13, (2014)
   

Maragos CM

Maragos CM, Emerging technologies for mycotoxin detection.
Journal of Toxicology-Toxin Reviews, 23, (2-3), 317-344, (2004)
   

Appell M et al., Synthesis and evaluation of molecularly imprinted polymers as sorbents of moniliformin.
Food Additives and Contaminants, 24, (1), 43-52, (2007)
   

Appell M et al., Book chapter, Molecularly Imprinted Polymers for Mycotoxins, 
In: Food Contaminants, Siantar DS, Trucksess MW, Scott PM, Herman EM (Eds.) American Chemical Society: Washington, DC, Ch. 8, 152-169, (2008)
   

Maragos CM, Recent advances in the development of novel materials for mycotoxin analysis.
Analytical and Bioanalytical Chemistry, 395, (5), 1205-1213, (2009)
   

Maragou NC

Alexiadou DK et al., Molecularly imprinted polymers for bisphenol A for HPLC and SPE from water and milk.
Journal of Separation Science, 31, (12), 2272-2282, (2008)
   

Maragou NC et al., Determination of bisphenol A in canned food by microwave assisted extraction, molecularly imprinted polymer-solid phase extraction and liquid chromatography-mass spectrometry.
Journal of Chromatography B, 1137, Article121938-(2020)
   

Marais A

Parlak O et al., Molecularly selective nanoporous membrane-based wearable organic electrochemical device for noninvasive cortisol sensing.
Science Advances, 4, (7), eaar2904-(2018)
   

Marangon E

Pellizzoni E et al., Fluorescent molecularly imprinted nanogels for the detection of anticancer drugs in human plasma.
Biosensors and Bioelectronics, 86, 913-919, (2016)
   

Pellizzoni E et al., Corrigendum to "Fluorescent molecularly imprinted nanogels for the detection of anticancer drugs in human plasma" [Biosens. Bioelectron. 86 (2016) 913-919].
Biosensors and Bioelectronics, 94, 728-(2017)
   

Tommasini M et al., Monitoring of Irinotecan in Human Plasma: Sensitive Fluorescent Nanogels by Molecular Imprinting.
ChemRxiv, (2019)
   

Maraschi F

Sturini M et al., Environmental photochemistry of fluoroquinolones in soil and in aqueous soil suspensions under solar light.
Environmental Science and Pollution Research, 21, (23), 13215-13221, (2014)
   

Speltini A et al., Newest applications of molecularly imprinted polymers for extraction of contaminants from environmental and food matrices: A review.
Analytica Chimica Acta, 974, 1-26, (2017)
   

Marazuela MD

Marazuela MD et al., Fiber-optic biosensors - an overview.
Analytical and Bioanalytical Chemistry, 372, (5-6), 664-682, (2002)
   

Urraca JL et al., Molecularly imprinted polymers with a streamlined mimic for zearalenone analysis.
Journal of Chromatography A, 1116, (1-2), 127-134, (2006)
   

Urraca JL et al., Molecularly imprinted polymers applied to the clean-up of zearalenone and [alpha]-zearalenol from cereal and swine feed sample extracts.
Analytical and Bioanalytical Chemistry, 385, (7), 1155-1161, (2006)
   

Marazuela MD et al., A review of novel strategies of sample preparation for the determination of antibacterial residues in foodstuffs using liquid chromatography-based analytical methods.
Analytica Chimica Acta, 645, (1-2), 5-17, (2009)
   

Rodriguez E et al., Multiresidue determination of fluoroquinolone antimicrobials in baby foods by liquid chromatography.
Food Chemistry, 127, (3), 1354-1360, (2011)
   

Rodríguez E et al., Multiresidue Determination of Ultratrace Levels of Fluoroquinolone Antimicrobials in Drinking and Aquaculture Water Samples by Automated Online Molecularly Imprinted Solid Phase Extraction and Liquid Chromatography.
Analytical Chemistry, 83, (6), 2046-2055, (2011)
   

Marc M

Plotka-Wasylka J et al., New Polymeric Materials for Solid Phase Extraction.
Critical Reviews in Analytical Chemistry, 47, (5), 373-383, (2017)
   

Marc M et al., Preparation and characterization of dummy-template molecularly imprinted polymers as potential sorbents for the recognition of selected polybrominated diphenyl ethers.
Analytica Chimica Acta, 1030, 77-95, (2018)
   

Marc M et al., Computational modeling of molecularly imprinted polymers as a green approach to the development of novel analytical sorbents.
TrAC Trends in Analytical Chemistry, 98, 64-78, (2018)
   

Rutkowska M et al., Application of molecularly imprinted polymers in analytical chiral separations and analysis.
TrAC Trends in Analytical Chemistry, 102, 91-102, (2018)
   

Marc M et al., Application potential of dummy molecularly imprinted polymers as solid-phase extraction sorbents for determination of low-mass polybrominated diphenyl ethers in soil and sediment samples.
Microchemical Journal, 144, 461-468, (2019)
   

Marc M et al., Multivariate Assessment of Procedures for Molecularly Imprinted Polymer Synthesis for Pesticides Determination in Environmental and Agricultural Samples.
Materials, 14, (22), ArticleNo7078-(2021)
   

Marce RM

Caro E et al., Synthesis and application of an oxytetracycline imprinted polymer for the solid-phase extraction of tetracycline antibiotics.
Analytica Chimica Acta, 552, (1-2), 81-86, (2005)
   

Caro E et al., Application of molecularly imprinted polymers to solid-phase extraction of compounds from environmental and biological samples.
TrAC Trends in Analytical Chemistry, 25, (2), 143-154, (2006)
   

Marcelo G

Marcelo G et al., Development of itaconic acid-based molecular imprinted polymers using supercritical fluid technology for pH-triggered drug delivery.
International Journal of Pharmaceutics, 542, (1-2), 125-131, (2018)
   

March JF

Bolisay LDV et al., Book chapter, Separation of baculoviruses using molecularly imprinted polymer hydrogels, 
In: Molecularly Imprinted Materials-2003, Kofinas P, Sellergren B, Roberts MJ (Eds.) Materials Research Society: Warrendale, Ch. 5, 29-33, (2004)
   

Marchand P

Deceuninck Y et al., Development and validation of a specific and sensitive gas chromatography tandem mass spectrometry method for the determination of bisphenol A residues in a large set of food items.
Journal of Chromatography A, 1362, 241-249, (2014)
   

Marchenko SV

Soldatkin AP et al., Biosensors. A quarter of a century of R&D experience.
Biopolymers and Cell, 29, (3), 188-206, (2013)
   

Marchetti L

Marchetti L et al., Biomimetic Catalysis.
ACS Catalysis, 1090-1118, (2011)
   

Marchetti N

Cavazzini A et al., Recent applications in chiral high performance liquid chromatography: A review.
Analytica Chimica Acta, 706, (2), 205-222, (2011)
   

Marchetti S

Cennamo N et al., Novel Optical Chemical Sensor Based on Molecularly Imprinted Polymer Inside a Trench Micro-machined in Double Plastic Optical Fiber.
Procedia Engineering, 168, 363-366, (2016)
   

Cennamo N et al., Intensity-based plastic optical fiber sensor with molecularly imprinted polymer sensitive layer.
Sensors and Actuators B: Chemical, 241, 534-540, (2017)
   

Pesavento M et al., Towards the development of cascaded surface plasmon resonance POF sensors exploiting gold films and synthetic recognition elements for detection of contaminants in transformer oil.
Sensing and Bio-Sensing Research, 13, 128-135, (2017)
   

Zeni L et al., Slab plasmonic platforms combined with Plastic Optical Fibers and Molecularly Imprinted Polymers for chemical sensing.
Optics & Laser Technology, 107, 484-490, (2018)
   

Cennamo N et al., A Novel Sensing Methodology to Detect Furfural in Water, Exploiting MIPs, and Inkjet-Printed Optical Waveguides.
IEEE Transactions on Instrumentation and Measurement, 68, (5), 1582-1589, (2019)
   

Pesavento M et al., Sensing by Molecularly Imprinted Polymer: Evaluation of the Binding Properties with Different Techniques.
Sensors, 19, (6), ArticleNo1344-(2019)
   

Marchi MRR

Marestoni LD et al., Semi-Empirical Quantum Chemistry Method for Pre-Polymerization Rational Design of Ciprofloxacin Imprinted Polymer and Adsorption Studies.
Journal of the Brazilian Chemical Society, 27, (1), 109-118, (2016)
   

Marchioni C

do Lago AC et al., Ion Imprinted Polymer for Preconcentration and Determination of Ultra-Trace Cadmium, Employing Flow Injection Analysis with Thermo Spray Flame Furnace Atomic Absorption Spectrometry.
Applied Spectroscopy, 70, (11), 1842-1850, (2016)
   

Marchioni C et al., In-tube solid-phase microextraction with a dummy molecularly imprinted monolithic capillary coupled to ultra-performance liquid chromatography-tandem mass spectrometry to determine cannabinoids in plasma samples.
Analytica Chimica Acta, 1099, 145-154, (2020)
   

Marchyk N

Harz S et al., Fluorescence optical spectrally resolved sensor based on molecularly imprinted polymers and microfluidics.
Engineering in Life Sciences, 11, (6), 559-565, (2011)
   

Kunath S et al., Multi-objective optimization and design of experiments as tools to tailor molecularly imprinted polymers specific for glucuronic acid.
Talanta, 105, 211-218, (2013)
   

Beyazit S et al., Versatile Synthetic Strategy for Coating Upconverting Nanoparticles with Polymer Shells through Localized Photopolymerization by Using the Particles as Internal Light Sources.
Angewandte Chemie International Edition, 53, (34), 8919-8923, (2014)
   

Marchyk N et al., One-pot synthesis of iniferter-bound polystyrene core nanoparticles for the controlled grafting of multilayer shells.
Nanoscale, 6, (5), 2872-2878, (2014)
   

Kunath S et al., Cell and Tissue Imaging with Molecularly Imprinted Polymers as Plastic Antibody Mimics.
Advanced Healthcare Materials, 4, (9), 1322-1326, (2015)
   

Marco MP

Salvador JP et al., A New Methodology for the Rational Design of Molecularly Imprinted Polymers.
Analytical Letters, 40, (7), 1294-1306, (2007)
   

Salvador JP et al., Book chapter, Application of bioassays/biosensors for the analysis of pharmaceuticals in environmental samples, 
In: Analysis, Fate and Removal of Pharmaceuticals in the Water Cycle, Petrovic M (Ed.) Elsevier: Ch. 2.8, 279-334, (2007)
   

Marcos MD

Salinas Y et al., Optical chemosensors and reagents to detect explosives.
Chemical Society Reviews, 41, (3), 1261-1296, (2012)
   

Marcos-Pascual C

Suárez-Rodríguez JL et al., Molecularly imprinted polymers for developing biomimetic optical sensors.
Quimica Analitica, 18, (Suppl 1), 20-22, (1999)
   

Marcus K

Helling S et al., Ultratrace Enrichment of Tyrosine Phosphorylated Peptides on an Imprinted Polymer.
Analytical Chemistry, 83, (5), 1862-1865, (2011)
   

Chen J et al., Low-bias phosphopeptide enrichment from scarce samples using plastic antibodies.
Scientific Reports, 5, ArticleNo11438-(2015)
   

Chen J et al., Validation of molecularly imprinted polymers for side chain selective phosphopeptide enrichment.
Journal of Chromatography A, 1471, 45-50, (2016)
   

Duarte M et al., Molecularly imprinted polymers synthesized via template immobilization on fumed silica nanoparticles for the enrichment of phosphopeptides.
Journal of Molecular Recognition, 31, (3), ArticleNoe2677-(2018)
   

Marcé RM

Masqué N et al., New polymeric and other types of sorbents for solid-phase extraction of polar organic micropollutants from environmental water.
TrAC Trends in Analytical Chemistry, 17, (6), 384-394, (1998)
   

Masqué N et al., Synthesis and evaluation of a molecularly imprinted polymer for selective on-line solid-phase extraction of 4-nitrophenol from environmental water.
Analytical Chemistry, 72, (17), 4122-4126, (2000)
   

Masqué N et al., Molecularly imprinted polymers: new tailor-made materials for selective solid-phase extraction.
TrAC Trends in Analytical Chemistry, 20, (9), 477-486, (2001)
   

Caro E et al., Non-covalent and semi-covalent molecularly imprinted polymers for selective on-line solid-phase extraction of 4-nitrophenol from water samples.
Journal of Chromatography A, 963, (1-2), 169-178, (2002)
   

Caro E et al., On-line solid-phase extraction with molecularly imprinted polymers to selectively extract substituted 4-chlorophenols and 4-nitrophenol from water.
Journal of Chromatography A, 995, (1-2), 233-238, (2003)
   

Caro E et al., Molecularly imprinted solid-phase extraction of naphthalene sulfonates from water.
Journal of Chromatography A, 1047, (2), 175-180, (2004)
   

Caro E et al., A new molecularly imprinted polymer for the selective extraction of naproxen from urine samples by solid-phase extraction.
Journal of Chromatography B, 813, (1-2), 137-143, (2004)
   

Caro E et al., Selective enrichment of anti-inflammatory drugs from river water samples by solid-phase extraction with a molecularly imprinted polymer.
Journal of Separation Science, 28, (16), 2080-2085, (2005)
   

Caro E et al., Novel enrofloxacin imprinted polymer applied to the solid-phase extraction of fluorinated quinolones from urine and tissue samples.
Analytica Chimica Acta, 562, (2), 145-151, (2006)
   

Caro E et al., Direct determination of ciprofloxacin by mass spectrometry after a two-step solid-phase extraction using a molecularly imprinted polymer.
Journal of Separation Science, 29, (9), 1230-1236, (2006)
   

Beltran A et al., Synthesis and application of a carbamazepine-imprinted polymer for solid-phase extraction from urine and wastewater.
Analytica Chimica Acta, 597, (1), 6-11, (2007)
   

Beltran A et al., Selective solid-phase extraction of amoxicillin and cephalexin from urine samples using a molecularly imprinted polymer.
Journal of Separation Science, 31, (15), 2868-2874, (2008)
   

Beltran A et al., Synthesis by precipitation polymerisation of molecularly imprinted polymer microspheres for the selective extraction of carbamazepine and oxcarbazepine from human urine.
Journal of Chromatography A, 1216, (12), 2248-2253, (2009)
   

Beltran A et al., Molecularly imprinted solid-phase extraction of cephalexin from water-based matrices.
Journal of Separation Science, 32, (19), 3319-3326, (2009)
   

Beltran A et al., Synthetic approaches to parabens molecularly imprinted polymers and their applications to the solid-phase extraction of river water samples.
Analytica Chimica Acta, 677, (1), 72-78, (2010)
   

Beltran A et al., Molecularly-imprinted polymers: useful sorbents for selective extractions.
TrAC Trends in Analytical Chemistry, 29, (11), 1363-1375, (2010)
   

Beltran A et al., Molecularly imprinted polymer with high-fidelity binding sites for the selective extraction of barbiturates from human urine.
Journal of Chromatography A, 1218, (29), 4612-4618, (2011)
   

Fontanals N et al., Ionic liquids in solid-phase extraction.
TrAC Trends in Analytical Chemistry, 41, 15-26, (2012)
   

Gilart N et al., Determination of pharmaceuticals in wastewaters using solid-phase extraction-liquid chromatography-tandem mass spectrometry.
Journal of Separation Science, 35, (7), 875-882, (2012)
   

Gilart N et al., A rapid determination of acidic pharmaceuticals in environmental waters by molecularly imprinted solid-phase extraction coupled to tandem mass spectrometry without chromatography.
Talanta, 110, 196-201, (2013)
   

Gilart N et al., Selective materials for solid-phase extraction in environmental analysis.
Trends in Environmental Analytical Chemistry, 1, e8-e18, (2014)
   

Mardani L

Vardini MT et al., Surface Imprinting of Silica Gel by Methyldopa and Its Application in the Solid Phase Extraction Procedure.
Journal of the Brazilian Chemical Society, 29, (2), 310-319, (2018)
   

Mardani L et al., Preparation of Molecularly Imprinted Magnetic Graphene Oxide-Gold Nanocomposite and Its Application to the Design of Electrochemical Sensor for Determination of Epinephrine.
Analytical Sciences, 35, (11), 1173-1182, (2019)
   

Mardani L et al., Design and construction of a carbon paste electrode modified with molecularly imprinted polymer-grafted nanocomposites for the determination of thyroxin in biological samples.
Analytical Methods, 12, (3), 333-344, (2020)
   

Mardaszew J

Patrikeev V et al., Selectivity of an adsorbent produced in the presence of bacteria with respect to optical isomers.
Doklady Akademii Nauk SSSR, 132, 850-852, (1960)
   

Mardihallaj A

Mirmahdieh S et al., Analysis of testosterone in human urine using molecularly imprinted solid-phase extraction and corona discharge ion mobility spectrometry.
Journal of Separation Science, 34, (1), 107-112, (2011)
   

Marestoni LD

Marestoni LD et al., Ion imprinted polymers: fundamentals, preparation strategies and applications in analytical chemistry.
Quimica Nova, 36, (8), 1194-1207, (2013)
   

Toro MJU et al., A new biomimetic sensor based on molecularly imprinted polymers for highly sensitive and selective determination of hexazinone herbicide.
Sensors and Actuators B: Chemical, 208, 299-306, (2015)
   

Marestoni LD et al., Semi-Empirical Quantum Chemistry Method for Pre-Polymerization Rational Design of Ciprofloxacin Imprinted Polymer and Adsorption Studies.
Journal of the Brazilian Chemical Society, 27, (1), 109-118, (2016)
   

Marfà J

Marfà J et al., Magnetic-molecularly imprinted polymers in electrochemical sensors and biosensors.
Analytical and Bioanalytical Chemistry, 413, (24), 6141-6157, (2021)
   

Margaillan A

Meouche W et al., Inverse Suspension Polymerization as a New Tool for the Synthesis of Ion-Imprinted Polymers.
Macromolecular Rapid Communications, 33, (10), 928-932, (2012)
   

Nicolescu TV et al., Tailor-made polymer beads for gallic acid recognition and separation.
Journal of Polymer Research, 19, (12), Article No. 2-(2012)
   

Branger C et al., Recent advances on ion-imprinted polymers.
Reactive and Functional Polymers, 73, (6), 859-875, (2013)
   

Nicolescu TV et al., A new microemulsion approach for producing molecularly imprinted polymers with selective recognition cavities for gallic acid.
Polymer International, 62, (6), 949-956, (2013)
   

Lenoble V et al., Assessment and modelling of Ni(II) retention by an ion-imprinted polymer: Application in natural samples.
Journal of Colloid and Interface Science, 448, 473-481, (2015)
   

Meouche W et al., Effect of porogen solvent on the properties of nickel ion imprinted polymer materials prepared by inverse suspension polymerization.
European Polymer Journal, 87, 124-135, (2017)
   

Margelefsky EL

Margelefsky EL et al., Book chapter, Heterogeneous Catalyst Design by Multiple Functional Group Positioning in Organic-Inorganic Materials: On the Route to Analogs of Multifunctional Enzymes, 
In: Model Systems in Catalysis, Rioux RM (Ed.) Springer: New York, Ch. 23, 495-516, (2010)
   

Margulis K

Karthik A et al., Rapid and selective detection of viruses using virus-imprinted polymer films.
Nanoscale, 7, (45), 18998-19003, (2015)
   

Maria LD

Cennamo N et al., Markers Detection in Transformer Oil by Plasmonic Chemical Sensor System Based on POF and MIPs.
IEEE Sensors Journal, 16, (21), 7663-7670, (2016)
   

Mariano TM

Mariano TM et al., Molecularly Imprinted Polypyrrole on Glassy Carbon Electrode Modified with Reduced Graphene Oxide and Gold Nanoparticles for Isoamyl Alcohol Analysis in Fusel Oil.
Journal of the Brazilian Chemical Society, 32, (2), 249-259, (2021)
   

Mariet C

Moussa M et al., Potential of ion imprinted polymers synthesized by trapping approach for selective solid phase extraction of lanthanides.
Talanta, 161, 459-468, (2016)
   

Marina ML

Guijarro-Díez M et al., Molecularly imprinted SPE and MEKC with in-capillary sample preconcentration for the determination of digoxin in human urine.
Electrophoresis, 33, (11), 1582-1588, (2012)
   

Sierra I et al., Approaches for enantioselective resolution of pharmaceuticals by miniaturised separation techniques with new chiral phases based on nanoparticles and monolithis.
Electrophoresis, 37, (19), 2538-2553, (2016)
   

Tan L et al., Boronate affinity glycosyl molecularly imprinted polymer microspheres for the determination of teicoplanin using ultra-high performance liquid chromatography coupled with tandem mass spectrometry.
Journal of Chromatography A, 1615, Article460776-(2020)
   

Tan L et al., Highly sensitive determination of amanita toxins in biological samples using [beta]-cyclodextrin collaborated molecularly imprinted polymers coupled with ultra-high performance liquid chromatography tandem mass spectrometry.
Journal of Chromatography A, 1630, Article461514-(2020)
   

Tan L et al., Glycosyl imprinted mesoporous microspheres for the determination of glycopeptide antibiotics using ultra-high performance liquid chromatography coupled with tandem mass spectrometry.
Journal of Chromatography A, 1659, Article462630-(2021)
   

Marino S

Marino S et al., Proceeding, "Screen printing" for chemical sensor and biosensor production, 
Mazzei F, Pilloton R (Eds.), 1-23, (2000)
   

Maris T

Le Fur E et al., Excavations in molecular crystals.
Chemical Communications, (24), 2966-2967, (2003)
   

Marjanovic L

Ahamed MEH et al., Selective extraction of gold(III) from metal chloride mixtures using ethylenediamine N-(2-(1-imidazolyl)ethyl) chitosan ion-imprinted polymer.
Hydrometallurgy, 140, 1-13, (2013)
   

Ahamed MEH et al., Ion imprinted polymers for the selective extraction of silver(I) ions in aqueous media: Kinetic modeling and isotherm studies.
Reactive and Functional Polymers, 73, (3), 474-483, (2013)
   

Ahamed MEH et al., Statistical Optimization, Kinetic and Isotherm Studies on Selective Adsorption of Silver and Gold Cyanocomplexes Using Aminoguanidyl-Chitosan Imprinted Polymers.
Journal of Advanced Chemical Engineering, 6, (2), ArticleNo149-(2016)
   

Mark HB

Schmiesing CS et al., Electrochemically assisted solid phase micro-extraction using L-dopa imprinted conducting polymer electrode fibers: Structural aspects.
Abstracts of Papers of the American Chemical Society, 225, (ANYL), 098-098, (2003)
   

Marken F

Li M et al., Electrochemical sensing using boronic acids.
Chemical Communications, 51, (78), 14562-14573, (2015)
   

Markina NE

Markina NE et al., Proceeding, Improvement of creatinine SERS detection using molecularly imprinted silica gel, 
(2019)
   

Markowitz MA

Markowitz MA et al., Functionalized silica gel particles for molecular imprinting.
Abstracts of Papers of the American Chemical Society, 215, (COLL), 179-179, (1998)
   

Markowitz MA et al., Template-directed molecular imprinting.
Abstracts of Papers of the American Chemical Society, 218, (INOR), 245-245, (1999)
   

Deng G et al., Control of surface expression of functional groups on silica particles.
Materials Science & Engineering C-Biomimetic And Supramolecular Systems, 11, (2), 165-172, (2000)
   

Deng G et al., Adsorption of organophosphorus compounds with molecular-imprinted silica particles.
Abstracts of Papers of the American Chemical Society, 219, (COLL), 249-249, (2000)
   

Markowitz MA et al., Formation and adsorption properties of surface-imprinted silicates.
Abstracts of Papers of the American Chemical Society, 220, (COLL), 143-143, (2000)
   

Markowitz MA et al., Catalytic silica particles via template-directed molecular imprinting.
Langmuir, 16, (4), 1759-1765, (2000)
   

Markowitz MA et al., Effects of added organosilanes on the formation and adsorption properties of silicates surface-imprinted with an organophosphonate.
Langmuir, 16, (15), 6148-6155, (2000)
   

Markowitz MA et al., Surface-imprinted silica particles: the effects of added organosilanes on catalytic activity.
Analytica Chimica Acta, 435, (1), 177-185, (2001)
   

Markowitz MA et al., Influence of quaternary amine organosilane structure on the formation and adsorption properties of surface-imprinted silicates.
Langmuir, 17, (22), 7085-7092, (2001)
   

Jayasundera S et al., Investigation of Surface Interactions in Molecular Recognition of Phosphonate Imprinted Organosilicates and the Role of Water.
Journal of Physical Chemistry B, 110, (37), 18121-18125, (2006)
   

Johnson-White B et al., Detection of organics using porphyrin embedded nanoporous organosilicas.
Biosensors and Bioelectronics, 22, (6), 1154-1162, (2007)
   

Trammell SA et al., Nanoporous Organosilicas as Preconcentration Materials for the Electrochemical Detection of Trinitrotoluene.
Analytical Chemistry, 80, (12), 4627-4633, (2008)
   

Borghard WG et al., Characterization and Testing of Periodic Mesoporous Organosilicas as Potential Selective Benzene Adsorbents.
Langmuir, 25, (21), 12661-12669, (2009)
   

Markus TZ

Pachón LD et al., Chiral imprinting of palladium with cinchona alkaloids.
Nature Chemistry, 1, (2), 160-164, (2009)
   

Markuszewski MJ

Bujak R et al., New sorbent materials for selective extraction of cocaine and benzoylecgonine from human urine samples.
Journal of Pharmaceutical and Biomedical Analysis, 120, 397-401, (2016)
   

Bujak R et al., Selective determination of cocaine and its metabolite benzoylecgonine in environmental samples by newly developed sorbent materials.
Talanta, 146, 401-409, (2016)
   

Marletta V

Cennamo N et al., Proceeding, A novel chemical optical sensor based on molecularly imprinted polymer, optical fibers and inkjet printing technology, 
ArticleNo8409619, (2018)
   

Cennamo N et al., A Novel Sensing Methodology to Detect Furfural in Water, Exploiting MIPs, and Inkjet-Printed Optical Waveguides.
IEEE Transactions on Instrumentation and Measurement, 68, (5), 1582-1589, (2019)
   

Marosi G

Weiser D et al., Bioimprinted lipases in PVA nanofibers as efficient immobilized biocatalysts.
Tetrahedron, 72, (46), 7335-7342, (2016)
   

Marote P

Di Masi S et al., Synthesis and Application of Ion-Imprinted Nanoparticles in Electrochemical Sensors for Copper (II) Determination.
ChemNanoMat, 5, (6), 754-760, (2019)
   

Munawar H et al., Determination of Fumonisin B1 in maize using molecularly imprinted polymer nanoparticles-based assay.
Food Chemistry, 298, Article125044-(2019)
   

Marque S

Saadaoui A et al., New biosourced chiral molecularly imprinted polymer: Synthesis, characterization, and evaluation of the recognition capacity of methyltestosterone.
Journal of Molecular Recognition, 30, (4), ArticleNoe2594-(2017)
   

Marques AC

Martins GV et al., 8-hydroxy-2'-deoxyguanosine (8-OHdG) biomarker detection down to picoMolar level on a plastic antibody film.
Biosensors and Bioelectronics, 86, 225-234, (2016)
   

Cardoso AR et al., Molecularly-imprinted chloramphenicol sensor with laser-induced graphene electrodes.
Biosensors and Bioelectronics, 124-125, 167-175, (2019)
   

Marques E

Ornelas M et al., Synthesis of glycylglycine-imprinted silica microspheres through different water-in-oil emulsion techniques.
Journal of Chromatography A, 1297, 138-145, (2013)
   

Marques EF

Ornelas M et al., Acylated-naproxen as the surface-active template in the preparation of micro- and nanospherical imprinted xerogels by emulsion techniques.
Journal of Chromatography A, 1437, 107-115, (2016)
   

Marques MRC

Gomes ACSA et al., Development of a new ion-imprinted polymer (IIP) with Cd2+ ions based on divinylbenzene copolymers containing amidoxime groups.
Polymer Bulletin, 77, (4), 1969-1981, (2020)
   

Marques PVS

Queirós RB et al., Microcystin-LR detection in water by the Fabry-Pérot interferometer using an optical fibre coated with a sol-gel imprinted sensing membrane.
Biosensors and Bioelectronics, 26, (9), 3932-3937, (2011)
   

Queiros RB et al., Determination of Microcystin-LR in waters in the subnanomolar range by sol-gel imprinted polymers on solid contact electrodes.
Analyst, 137, (10), 2437-2444, (2012)
   

Queirós RB et al., Label-free Detection of Microcystin-LR in Waters Using Real-Time Potentiometric Biosensors Based on Single-Walled Carbon Nanotubes Imprinted Polymers.
Procedia Engineering, 47, 758-761, (2012)
   

Queirós RB et al., Recycling old screen-printed electrodes with newly designed plastic antibodies on the wall of carbon nanotubes as sensory element for in situ detection of bacterial toxins in water.
Sensors and Actuators B: Chemical, 189, 21-29, (2013)
   

Marques SS

Osório MV et al., Fluorometric method based on molecular recognition solid-phase extraction for determination of riboflavin in milk and infant formula.
Journal of Food Composition and Analysis, 45, 141-146, (2016)
   

Marquez M

Larsen G et al., Amine dendrimers as templates for amorphous silicas.
Journal of Physical Chemistry B, 104, (20), 4840-4843, (2000)
   

Gill RS et al., Molecular imprinting of a cellulose/silica composite with caffeine and its characterization.
Microporous And Mesoporous Materials, 85, (1-2), 129-135, (2005)
   

Fernández-Barbero A et al., Gels and microgels for nanotechnological applications.
Advances in Colloid and Interface Science, 147-148, 88-108, (2009)
   

Marrazza G

Panasyuk T et al., Molecular imprinted polymers prepared by electropolymerization of Ni-(Protoporphyrin IX).
Analytical Letters, 31, (11), 1809-1824, (1998)
   

Panasyuk T et al., Proceeding, Selective films prepared by imprinting electropolymerization of metalloporphyrins, 
Di Natale C, D'Amico A, Sberveglieri G (Eds.), 25-29, (1999)
   

Berti F et al., Quasi-monodimensional polyaniline nanostructures for enhanced molecularly imprinted polymer-based sensing.
Biosensors and Bioelectronics, 26, (2), 497-503, (2010)
   

Berti F et al., Book chapter, One-Dimensional Polyaniline Nanotubes for Enhanced Chemical and Biochemical Sensing, 
In: Sensors and Microsystems, Neri G, Donato N, D'Amico A, Di Natale C (Eds.) Springer Netherlands: Ch. 48, 311-315, (2011)
   

Marrazza G, Piezoelectric Biosensors for Organophosphate and Carbamate Pesticides: A Review.
Biosensors, 4, (3), 310-317, (2014)
   

Rapini R et al., Book chapter, Biosensor Potential in Pesticide Monitoring, 
In: Biosensors for Sustainable Food - New Opportunities and Technical Challenges, Scognamiglio V, Rea G, Arduini F, Palleschi G (Eds.) Elsevier: Ch. 1, 3-31, (2016)
   

Selvolini G et al., MIP-Based Sensors: Promising New Tools for Cancer Biomarker Determination.
Sensors, 17, (4), ArticleNo718-(2017)
   

Rapini R et al., NanoMIP-based approach for the suppression of interference signals in electrochemical sensors.
Analyst, 144, (24), 7290-7295, (2019)
   

Cowen T et al., Synthetic Mechanism of Molecular Imprinting at the Solid Phase.
Macromolecules, 53, (4), 1435-1442, (2020)
   

Marriott PJ

Nolvachai Y et al., Miniaturized molecularly imprinted polymer extraction method for the gas chromatographic analysis of flavonoids.
Journal of Separation Science, 37, (8), 1018-1025, (2014)
   

Mars A

Mars A et al., Molecularly imprinted curcumin nanoparticles decorated paper for electrochemical and fluorescence dual-mode sensing of bisphenol A.
Microchimica Acta, 188, (3), Article94-(2021)
   

Marshall AG

Putman JC et al., Screening Petroleum Crude Oils for ARN Tetraprotic Acids with Molecularly Imprinted Polymers.
Energy & Fuels, 30, (7), 5651-5655, (2016)
   

Marsin Sanagi M

See HH et al., Determination of triazine herbicides using membrane-protected carbon nanotubes solid phase membrane tip extraction prior to micro-liquid chromatography.
Journal of Chromatography A, 1217, (11), 1767-1772, (2010)
   

Marson S

Chianella I et al., Book chapter, Conductive Polymers for Plastic Electronics, 
In: Molecularly Imprinted Sensors, Li SJ, Ge Y, Piletsky SA, Lunec J (Eds.) Elsevier: Amsterdam, Ch. 12, 275-301, (2012)
   

Marsuka A

Kornysova O et al., A simplified synthesis of polymeric nonparticulate stationary phases with macrocyclic antibiotic as chiral selector for capillary electrochromatography.
Electrophoresis, 25, (16), 2825-2829, (2004)
   

Martendal E

Augusto F et al., New sorbents for extraction and microextraction techniques.
Journal of Chromatography A, 1217, (16), 2533-2542, (2010)
   

Marti T

Wallimann P et al., Steroids in molecular recognition.
Chemical Reviews, 97, (5), 1567-1608, (1997)
   

Martikainen L

Yañez F et al., Supercritical fluid-assisted preparation of imprinted contact lenses for drug delivery.
Acta Biomaterialia, 7, (3), 1019-1030, (2011)
   

Martin AJP

Martin AJP, Book chapter, The development of partition chromatography, 
In: Nobel Lectures, Chemistry 1942-1962, Elsevier: Amsterdam, 359-371, (1952)
   

Martin AR

Martin AR et al., Boron and nucleic acid chemistries: merging the best of both worlds.
Chemical Society Reviews, 42, (13), 5684-5713, (2013)
   

Martin C

Roy B et al., Synthesis and Evaluation of a Molecularly Imprinted Polymer for Selective Solid-Phase Extraction of Irinotecan from Human Serum Samples.
Journal of Functional Biomaterials, 3, (1), 131-142, (2012)
   

Martin CR

Hong JM et al., Selectively-permeable ultrathin film composite membranes based on molecularly-imprinted polymers.
Chemistry of Materials, 10, (4), 1029-1033, (1998)
   

Martin GP

Suedee R et al., Evaluation of matrices containing molecularly imprinted polymers in the enantioselective-controlled delivery of b-blockers.
Journal of Controlled Release, 66, (2-3), 135-147, (2000)
   

Suedee R et al., Stereoselective release behaviors of imprinted bead matrices.
Drug Development and Industrial Pharmacy, 28, (5), 545-554, (2002)
   

Bodhibukkana C et al., Composite membrane of bacterially-derived cellulose and molecularly imprinted polymer for use as a transdermal enantioselective controlled-release system of racemic propranolol.
Journal of Controlled Release, 113, (1), 43-56, (2006)
   

Suedee R et al., Temperature sensitive dopamine-imprinted (N, N-methylene-bis-acrylamide cross-linked) polymer and its potential application to the selective extraction of adrenergic drugs from urine.
Journal of Chromatography A, 1114, (2), 239-249, (2006)
   

Jantarat C et al., S-Propranolol imprinted polymer nanoparticle-on-microsphere composite porous cellulose membrane for the enantioselectively controlled delivery of racemic propranolol.
International Journal of Pharmaceutics, 349, (1-2), 212-225, (2008)
   

Martin L

Vulfson EN et al., Book chapter, New imprinting strategies, 
In: Drug-development assay approaches including molecular imprinting and biomarkers, Reid E, Hill HM, Wilson ID (Eds.) Royal Society of Chemistry: Ch. A-6, 44-48, (1998)
   

Whitcombe MJ et al., Predicting the selectivity of imprinted polymers.
Chromatographia, 47, (7-8), 457-464, (1998)
   

Martin M

Henricksen G et al., Artificial antibodies.
IVD Technol. Mag., (7), 46-51, (1996)
   

Zouaoui F et al., Theoretical study and analytical performance of a lysozyme impedimetric microsensor based on a molecularly imprinted chitosan film.
Sensors and Actuators B: Chemical, 339, Article129903-(2021)
   

Martin MA

Martin MA et al., Trends in the design and application of optical chemosensors in pharmaceutical and biomedical analysis.
Current Pharmaceutical Analysis, 4, (3), 106-117, (2008)
   

Martin P

Martin P et al., Evaluation of a molecular-imprinted polymer for use in the solid phase extraction of propranolol from biological fluids.
Analytical Communications, 34, (2), 45-47, (1997)
   

Martin P et al., Book chapter, Selective SPE's using molecular imprinted polymers, 
In: Drug-development assay approaches including molecular imprinting and biomarkers, Reid E, Hill HM, Wilson ID (Eds.) Royal Society of Chemistry: Ch. A-3, 21-27, (1998)
   

Olsen J et al., Molecular imprints as sorbents for solid phase extraction: potential and applications.
Analytical Communications, 35, (10), H13-H14, (1998)
   

Olsen J et al., Methodology for assessing the properties of molecular imprinted polymers for solid phase extraction.
Analyst, 124, (4), 467-471, (1999)
   

Martin P et al., Application and elution conditions for the selective elution of analytes from molecular imprinted polymers after extraction from aqueous samples: Application to b-blockers.
Chromatographia, 52, (Supplement 1), S19-S23, (2000)
   

Martin P et al., Optimisation of procedures for the extraction of structural analogues of propranolol with molecular imprinted polymers for sample preparation.
Journal of Chromatography A, 889, (1-2), 143-147, (2000)
   

Mullett WM et al., In-tube molecularly imprinted polymer solid-phase microextraction for the selective determination of propranolol.
Analytical Chemistry, 73, (11), 2383-2389, (2001)
   

Martin PD

Martin PD et al., An unexpected selectivity of a propranolol-derived molecular imprint for tamoxifen.
Analyst, 126, (6), 757-759, (2001)
   

Martin PD et al., Comparison of normal and reversed-phase solid phase extraction methods for extraction of b-blockers from plasma using molecularly imprinted polymers.
Analyst, 128, (4), 345-350, (2003)
   

Martin PD et al., Comparison of extraction of a b-blocker from plasma onto a molecularly imprinted polymer with liquid-liquid extraction and solid phase extraction methods.
Journal of Pharmaceutical and Biomedical Analysis, 35, (5), 1231-1239, (2004)
   

Martin RT

Allais F et al., ROMP versus radical polymerization in molecular imprinting.
Abstracts of Papers of the American Chemical Society, 225, (CHED), 103-103, (2003)
   

Enholm EJ et al., A Comparison of a Radical Polymerization vs ROMP Matrix for Molecular Imprinting.
Macromolecules, 39, (23), 7859-7862, (2006)
   

Martin T

Rivera JM et al., Chiral guests and their ghosts in reversibly assembled hosts.
Angewandte Chemie International Edition, 39, (12), 2130-2132, (2000)
   

Martin-Esteban A

Tamayo FG et al., Highly selective fenuron-imprinted polymer with a homogeneous binding site distribution prepared by precipitation polymerisation and its application to the clean-up of fenuron in plant samples.
Analytica Chimica Acta, 482, (2), 165-173, (2003)
   

Turiel E et al., Assessment of the cross-reactivity and binding sites characterisation of a propazine-imprinted polymer using the Langmuir-Freundlich isotherm.
Analyst, 128, (2), 137-141, (2003)
   

Cacho C et al., Characterisation and quality assessment of binding sites on a propazine-imprinted polymer prepared by precipitation polymerisation.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 802, (2), 347-353, (2004)
   

Cacho C et al., Characterisation and quality assessment of binding sites on a propazine-imprinted polymer prepared by precipitation polymerisation.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 83-83, (2004)
   

Martin-Esteban A, Molecular imprinting technology: a simple way of synthesizing biomimetic polymeric receptors.
Analytical and Bioanalytical Chemistry, 378, (8), 1875-1875, (2004)
   

Turiel E et al., Molecularly imprinted polymers: towards highly selective stationary phases in liquid chromatography and capillary electrophoresis.
Analytical and Bioanalytical Chemistry, 378, (8), 1876-1886, (2004)
   

Gallego-Gallegos M et al., Synthesis and evaluation of molecularly imprinted polymers for organotin compounds: a screening method for tributyltin detection in seawater.
Analytica Chimica Acta, 531, (1), 33-39, (2005)
   

Tamayo FG et al., Selective high performance liquid chromatography imprinted-stationary phases for the screening of phenylurea herbicides in vegetable samples.
Journal of Chromatography A, 1098, (1-2), 116-122, (2005)
   

Tamayo FG et al., Evaluation of new selective molecularly imprinted polymers prepared by precipitation polymerisation for the extraction of phenylurea herbicides.
Journal of Chromatography A, 1069, (2), 173-181, (2005)
   

Tamayo FG et al., Clean up of phenylurea herbicides in plant sample extracts using molecularly imprinted polymers.
Analytical and Bioanalytical Chemistry, 381, (6), 1234-1240, (2005)
   

Tamayo FG et al., Synthesis and evaluation of new propazine-imprinted polymer formats for use as stationary phases in liquid chromatography.
Analytica Chimica Acta, 542, (1), 38-46, (2005)
   

Turiel E et al., Molecular imprinting technology in capillary electrochromatography.
Journal of Separation Science, 28, (8), 719-728, (2005)
   

Turiel E et al., HPLC imprinted-stationary phase prepared by precipitation polymerisation for the determination of thiabendazole in fruit.
Analyst, 130, (12), 1601-1607, (2005)
   

Cacho C et al., Semi-covalent imprinted polymer using propazine methacrylate as template molecule for the clean-up of triazines in soil and vegetable samples.
Journal of Chromatography A, 1114, (2), 255-262, (2006)
   

Martin-Esteban A et al., Selective molecularly imprinted polymer obtained from a combinatorial library for the extraction of bisphenol A.
Combinatorial Chemistry & High Throughput Screening, 9, (10), 747-751, (2006)
   

Turiel E et al., Molecularly Imprinted Polymeric Fibers for Solid-Phase Microextraction.
Analytical Chemistry, 79, (8), 3099-3104, (2007)
   

Turiel E et al., Molecular imprinting-based separation methods for selective analysis of fluoroquinolones in soils.
Journal of Chromatography A, 1172, (2), 97-104, (2007)
   

Otero-Romaní J et al., Synthesis, characterization and evaluation of ionic-imprinted polymers for solid-phase extraction of nickel from seawater.
Analytica Chimica Acta, 630, (1), 1-9, (2008)
   

Martin-Esteban A, Molecularly Imprinted Polymers: Providing Selectivity to Sample Preparation.
Journal of Chromatographic Science, 47, (3), 254-256, (2009)
   

Otero-Romaní J et al., Inductively coupled plasma-optical emission spectrometry/mass spectrometry for the determination of Cu, Ni, Pb and Zn in seawater after ionic imprinted polymer based solid phase extraction.
Talanta, 79, (3), 723-729, (2009)
   

Otero-Romaní J et al., Ionic imprinted polymer for nickel recognition by using the bi-functionalized 5-vinyl-8-hydroxyquinoline as a monomer: Application as a new solid phase extraction support.
Microchemical Journal, 93, (2), 225-231, (2009)
   

Núñez L et al., Molecularly imprinted polymer for the extraction of parabens from environmental solid samples prior to their determination by high performance liquid chromatography-ultraviolet detection.
Talanta, 80, (5), 1782-1788, (2010)
   

Martin-Esteban A et al., Molecular Imprinting: A New Journal, A New Home for Imprinters.
Molecular Imprinting, 1-2, (2012)
   

Mazzotta E et al., Electrosynthesis of molecularly imprinted polypyrrole for the antibiotic levofloxacin.
Thin Solid Films, 520, (6), 1938-1943, (2012)
   

Martinefski M

Contin M et al., The use of coenzyme Q0 as a template in the development of a molecularly imprinted polymer for the selective recognition of coenzyme Q10.
Analytica Chimica Acta, 807, 67-74, (2014)
   

Martinez-Castro I

Sanz ML et al., Recent developments in sample preparation for chromatographic analysis of carbohydrates.
Journal of Chromatography A, 1153, (1-2), 74-89, (2007)
   

Martinez-Cisneros CS

Almeida SAA et al., Novel LTCC-potentiometric microfluidic device for biparametric analysis of organic compounds carrying plastic antibodies as ionophores: Application to sulfamethoxazole and trimethoprim.
Biosensors and Bioelectronics, 30, (1), 197-203, (2011)
   

Martinez-Ruiz P

Mena ML et al., Molecularly imprinted polymers for on-line preconcentration by solid phase extraction of pirimicarb in water samples.
Analytica Chimica Acta, 451, (2), 297-304, (2002)
   

Mena ML et al., Molecularly imprinted polymers for on-line clean up and preconcentration of chloramphenicol prior to its voltammetric determination.
Analytical and Bioanalytical Chemistry, 376, (1), 18-25, (2003)
   

Martinez-Sena T

Martinez-Sena T et al., Determination of non-steroidal anti-inflammatory drugs in water and urine using selective molecular imprinted polymer extraction and liquid chromatography.
Journal of Pharmaceutical and Biomedical Analysis, 131, 48-53, (2016)
   

Martinot L

Caprasse F et al., New silica based polymeric systems designed for the solid-liquid extraction of uranyl ions.
Journal of Materials Chemistry, 12, (1), 137-142, (2002)
   

Martins ANC

Martins ANC et al., Isolation, analytical quantification and seasonal variation of labdanolic acid from the Portuguese-grown Cistus ladaniferus.
Industrial Crops and Products, 60, 226-232, (2014)
   

Martins CPB

Núñez O et al., New trends in fast liquid chromatography for food and environmental analysis.
Journal of Chromatography A, 1228, (1), 298-323, (2012)
   

Núñez O et al., State-of-the-art in fast liquid chromatography-mass spectrometry for bio-analytical applications.
Journal of Chromatography B, 927, 3-21, (2013)
   

Martins FA

Moreno-Bondi MC et al., Proceeding, Molecularly imprinted polymers as biomimetic receptors for fluorescence-based optical sensors, 
Cutolo A, Culshaw B, López-Higuera JM (Eds.), Art. No. 66190C, (2007)
   

Martins GV

Martins GV et al., 8-hydroxy-2'-deoxyguanosine (8-OHdG) biomarker detection down to picoMolar level on a plastic antibody film.
Biosensors and Bioelectronics, 86, 225-234, (2016)
   

Martins I

de Barros LA et al., A selective molecularly imprinted polymer-solid phase extraction for the determination of fenitrothion in tomatoes.
Analytical and Bioanalytical Chemistry, 397, (3), 1355-1361, (2010)
   

Vitor RV et al., Application of molecularly imprinted polymer solid-phase extraction for salivary cotinine.
Analytical and Bioanalytical Chemistry, 400, (7), 2109-2117, (2011)
   

Baldim IM et al., Application of the molecularly imprinted solid-phase extraction to the organophosphate residues determination in strawberries.
Analytical and Bioanalytical Chemistry, 404, (6), 1959-1966, (2012)
   

Santos MG et al., Molecularly imprinted solid phase extraction of urinary diethyl thiophosphate and diethyl dithiophosphate and their analysis by gas chromatography-mass spectrometry.
Journal of Chromatography B, 909, 70-76, (2012)
   

Vieira AC et al., Molecularly imprinted solid-phase extraction and high-performance liquid chromatography with ultraviolet detection for the determination of urinary trans, trans-muconic acid: a comparison with ionic exchange extraction.
Analyst, 137, (10), 2462-2469, (2012)
   

Martins MCG et al., Determination of Cotinine in Urine by Molecularly Imprinted Polymer Solid Phase and Liquid-Liquid Extraction Coupled with Gas Chromatography.
Analytical Letters, 48, (8), 1245-1256, (2015)
   

de Lima MM et al., On-line restricted access molecularly imprinted solid phase extraction of ivermectin in meat samples followed by HPLC-UV analysis.
Food Chemistry, 197, (Part A), 7-13, (2016)
   

Martins MCG

Vitor RV et al., Application of molecularly imprinted polymer solid-phase extraction for salivary cotinine.
Analytical and Bioanalytical Chemistry, 400, (7), 2109-2117, (2011)
   

Martins MCG et al., Determination of Cotinine in Urine by Molecularly Imprinted Polymer Solid Phase and Liquid-Liquid Extraction Coupled with Gas Chromatography.
Analytical Letters, 48, (8), 1245-1256, (2015)
   

Martins N

Simões M et al., Tailor-made molecularly imprinted polymers for dimethoate and deltamethrin recognition: synthesis, characterization and chromatographic evaluation.
Journal of Polymer Research, 21, (3), Article No 368-(2014)
   

Garcia R et al., Development of a selective sorbent for the solid-phase extraction of terbuthylazine in olive oil samples: A molecular imprinting strategy.
Journal of Separation Science, 38, (7), 1204-1212, (2015)
   

Martins N et al., An emerging approach for the targeting analysis of dimethoate in olive oil: The role of molecularly imprinted polymers based on photo-iniferter induced "living" radical polymerization.
Reactive and Functional Polymers, 86, 37-46, (2015)
   

Martins N et al., Design and development of molecularly imprinted polymers for the selective extraction of deltamethrin in olive oil: An integrated computational-assisted approach.
Journal of Chromatography A, 1409, 1-10, (2015)
   

Martins R

Cardoso AR et al., Molecularly-imprinted chloramphenicol sensor with laser-induced graphene electrodes.
Biosensors and Bioelectronics, 124-125, 167-175, (2019)
   

Martins RO

Martins RO et al., Molecularly imprinted polymer as solid phase extraction phase for condensed tannin determination from Brazilian natural sources.
Journal of Chromatography A, 1620, Article460977-(2020)
   

Santos H et al., Molecularly imprinted polymers for miniaturized sample preparation techniques: strategies for chromatographic and mass spectrometry methods.
Analytical Methods, 12, (7), 894-911, (2020)
   

Martins S

Benito-Peña E et al., Water-compatible molecularly imprinted polymer for the selective recognition of fluoroquinolone antibiotics in biological samples.
Analytical and Bioanalytical Chemistry, 393, (1), 235-245, (2009)
   

Marton Z

Chaput L et al., Enhancing the enantioselectivity of CALB by substrate imprinting: A combined experimental and molecular dynamics simulation model study.
Journal of Molecular Catalysis B: Enzymatic, 84, 55-61, (2012)
   

Marty J-L

Campàs M et al., Biosensors to detect marine toxins: Assessing seafood safety.
Talanta, 72, (3), 884-895, (2007)
   

Sassolas A et al., Biosensors for Pesticide Detection: New Trends.
American Journal of Analytical Chemistry, 3, (3), 210-232, (2012)
   

Marty JD

Marty JD et al., New molecular imprinting materials: Liquid crystalline networks.
Macromolecules, 32, (25), 8674-8677, (1999)
   

Marty JD et al., Liquid crystal polysiloxane networks as materials for molecular imprinting technology: memory of the mesomorphic organization.
Liquid Crystals, 29, (4), 529-536, (2002)
   

Marty JD et al., Liquid crystalline networks: Potential uses in molecular imprinting technique.
Molecular Crystals And Liquid Crystals, 411, 561-568, (2004)
   

Marty JD et al., Chiral molecular imprinting in liquid-crystalline network.
European Physical Journal E, 17, (4), 515-520, (2005)
   

Marty JD et al., High capacity molecular imprinted mesomorphous networks usable as antibody mimics.
Molecular Crystals And Liquid Crystals, 437, 1307-1314, (2005)
   

Marty JD et al., Book chapter, Molecular imprinting: State of the art and perspectives, 
In: Microlithography/Molecular Imprinting, Ito H, Marty JD (Eds.) Springer-Verlag GmbH: Ch. 1, 1-35, (2005)
   

Palaprat G et al., Study of Hydrogen Bonding in Liquid Crystalline Solvent by Fourier Transform Infrared Spectroscopy.
Journal of Physical Chemistry A, 110, (47), 12887-12890, (2006)
   

Palaprat G et al., Introduction of unusual properties into polymers by the use of liquid-crystalline moieties.
Polymer International, 55, (10), 1191-1198, (2006)
   

Binet C et al., Benefit of liquid crystal moieties in the MIP technique.
Analytica Chimica Acta, 591, (1), 1-6, (2007)
   

Palaprat G et al., Enantioselective Absorption of Chirally Doped Liquid Crystalline Networks Studied by the Use of an Electronic Microbalance.
Journal of Physical Chemistry B, 111, (31), 9239-9243, (2007)
   

Mingotaud AF et al., Book chapter, Next generation molecular imprinted polymers: Examples of liquid crystalline materials and hydrogels for protein recognition, 
In: Molecular Recognition: Biotechnology, Chemical Engineering and Materials Applications, McEvoy JA (Ed.) Nova Science Publishers, Inc.: New York, Ch. 2, 45-77, (2011)
   

Marty JL

Hayat A et al., Recent advances in ochratoxin A-producing fungi detection based on PCR methods and ochratoxin A analysis in food matrices.
Food Control, 26, (2), 401-415, (2012)
   

Bueno D et al., Portable and low cost fluorescence set-up for in-situ screening of Ochratoxin A.
Talanta, 159, 395-400, (2016)
   

Catanante G et al., Sensitive analytical performance of folding based biosensor using methylene blue tagged aptamers.
Talanta, 153, 138-144, (2016)
   

Mishra RK et al., Sensitive quantitation of Ochratoxin A in cocoa beans using differential pulse voltammetry based aptasensor.
Food Chemistry, 192, 799-804, (2016)
   

Bazin I et al., New biorecognition molecules in biosensors for the detection of toxins.
Biosensors and Bioelectronics, 87, 285-298, (2017)
   

Bueno-Hernández D et al., Low cost optical device for detection of fluorescence from Ochratoxin A using a CMOS sensor.
Sensors and Actuators B: Chemical, 246, 606-614, (2017)
   

Rhouati A et al., Book chapter, MIPs and Aptamers as Artificial Receptors in Advanced Separation Techniques, 
In: Handbook of Smart Materials in Analytical Chemistry, de la Guardia M, Esteve-Turrillas FA (Eds.) Wiley: Ch. 26, 825-857, (2019)
   

Martyanov ON

Dmitrienko EV et al., Molecularly imprinted polymers for biomedical and biotechnological applications.
Russian Chemical Reviews, 85, (5), 513-536, (2016)
   

Martynaitis V

Machtejevas E et al., Screening of oxazepine indole enantiomers by means of high performance liquid chromatography with imprinted polymer stationary phase.
Journal of Separation Science, 27, (7-8), 547-551, (2004)
   

Martín Del Valle EM

Herrero EP et al., Protein Imprinting by Means of Alginate-Based Polymer Microcapsules.
Industrial & Engineering Chemistry Research, 49, (20), 9811-9814, (2010)
   

Martín MA

Olives AI et al., Isolation and quantitative methods for analysis of non-steroidal anti-inflammatory drugs.
Anti-Inflammatory and Anti-Allergy Agents in Medicinal Chemistry, 11, (1), 65-95, (2012)
   

Martín-Esteban A

Martín-Esteban A et al., Effect of template size on the selectivity of molecularly imprinted polymers for phenylurea herbicides.
Chromatographia, 53, (Supplement 1), S434-S437, (2001)
   

Martín-Esteban A, Molecularly imprinted polymers: new molecular recognition materials for selective solid-phase extraction of organic compounds.
Fresenius Journal of Analytical Chemistry, 370, (7), 795-802, (2001)
   

Turiel E et al., Molecular recognition in a propazine-imprinted polymer and its application to the determination of triazines in environmental samples.
Analytical Chemistry, 73, (21), 5133-5141, (2001)
   

Cacho C et al., Clean-up of triazines in vegetable extracts by molecularly-imprinted solid-phase extraction using a propazine-imprinted polymer.
Analytical and Bioanalytical Chemistry, 376, (4), 491-496, (2003)
   

Tamayo FG et al., Molecularly imprinted polymers for solid-phase extraction and solid-phase microextraction: Recent developments and future trends.
Journal of Chromatography A, 1152, (1-2), 32-40, (2007)
   

Núñez L et al., Molecularly imprinted polymer for selective extraction of endocrine disrupters nonylphenol and its ethoxylated derivates from environmental solids.
Journal of Separation Science, 31, (13), 2492-2499, (2008)
   

Díaz-Alvarez M et al., Selective sample preparation for the analysis of (fluoro)quinolones in baby food: molecularly imprinted polymers versus anion-exchange resins.
Analytical and Bioanalytical Chemistry, 393, (3), 899-905, (2009)
   

Turiel E et al., Molecularly imprinted polymers for solid-phase microextraction.
Journal of Separation Science, 32, (19), 3278-3284, (2009)
   

Barahona F et al., Chromatographic performance of molecularly imprinted polymers: Core-shell microspheres by precipitation polymerization and grafted MIP films via iniferter-modified silica beads.
Journal of Polymer Science Part A: Polymer Chemistry, 48, (5), 1058-1066, (2010)
   

Sellergren B et al., Book chapter, The Use of Molecularly Imprinted Polymers for Sampling and Sample Preparation, 
In: Handbook of Sample Preparation, Pawliszyn J, Lord HL (Eds.) John Wiley & Sons: Hoboken, New Jersey, Ch. 23, 445-474, (2010)
   

Turiel E et al., Molecularly imprinted polymers for sample preparation: A review.
Analytica Chimica Acta, 668, (2), 87-99, (2010)
   

Barahona F et al., Synthesis of core-shell molecularly imprinted polymer microspheres by precipitation polymerization for the inline molecularly imprinted solid-phase extraction of thiabendazole from citrus fruits and orange juice samples.
Journal of Separation Science, 34, (2), 217-224, (2011)
   

Barahona F et al., Molecularly imprinted polymer grafted to porous polyethylene frits: A new selective solid-phase extraction format.
Journal of Chromatography A, 1218, (40), 7065-7070, (2011)
   

Barahona F et al., Supported liquid membrane-protected molecularly imprinted fibre for solid-phase microextraction of thiabendazole.
Analytica Chimica Acta, 694, (1-2), 83-89, (2011)
   

Martín-Esteban A et al., Book chapter, 2.17 - Molecularly Imprinted Polymers, 
In: Comprehensive Sampling and Sample Preparation, Pawliszyn J (Ed.) Academic Press: Oxford, Ch. 17, 331-344, (2012)
   

Turiel E et al., Molecularly imprinted stir bars for selective extraction of thiabendazole in citrus samples.
Journal of Separation Science, 35, (21), 2962-2969, (2012)
   

Martín-Esteban A, Molecularly-imprinted polymers as a versatile, highly selective tool in sample preparation.
TrAC Trends in Analytical Chemistry, 45, 169-181, (2013)
   

Díaz-Álvarez M et al., Evaluation of electrochemically synthesized sulfadimethoxine-imprinted polymer for solid-phase microextraction of sulfonamides.
Journal of Molecular Recognition, 27, (6), 415-420, (2014)
   

Díaz-Álvarez M et al., Supported liquid membrane-protected molecularly imprinted beads for micro-solid phase extraction of sulfonamides in environmental waters.
Journal of Chromatography A, 1357, 158-164, (2014)
   

Barahona F et al., Molecularly imprinted polymer-coated hollow fiber membrane for the microextraction of triazines directly from environmental waters.
Journal of Chromatography A, 1442, 12-18, (2016)
   

Díaz-Álvarez M et al., Molecularly imprinted polymer monolith containing magnetic nanoparticles for the stir-bar sorptive extraction of triazines from environmental soil samples.
Journal of Chromatography A, 1469, 1-7, (2016)
   

Díaz-Álvarez M et al., Preparation of molecularly imprinted polymeric fibers using a single bifunctional monomer for the solid-phase microextraction of parabens from environmental solid samples.
Journal of Separation Science, 39, (3), 552-558, (2016)
   

Martín-Esteban A, Recent molecularly imprinted polymer-based sample preparation techniques in environmental analysis.
Trends in Environmental Analytical Chemistry, 9, 8-14, (2016)
   

Turiel E et al., Supported liquid membrane-protected molecularly imprinted beads for the solid phase micro-extraction of triazines from environmental waters.
Journal of Chromatography A, 1432, 1-6, (2016)
   

García-Fernández M et al., Molecularly imprinted magnetic nanoparticles for the micro solid-phase extraction of thiabendazole from citrus samples.
Journal of Separation Science, 40, (12), 2638-2644, (2017)
   

Patiño-Ropero MJ et al., Molecularly imprinted core-shell magnetic nanoparticles for selective extraction of triazines in soils.
Journal of Molecular Recognition, 30, (4), ArticleNoe2593-(2017)
   

Díaz-Álvarez M et al., Hollow fiber membrane-protected molecularly imprinted microspheres for micro solid-phase extraction and clean-up of thiabendazole in citrus samples.
Journal of Chromatography A, 1531, 39-45, (2018)
   

Díaz-Álvarez M et al., Hollow Fibre Membrane-Protected Molecularly Imprinted Microsolid-Phase Extraction (HFM-Protected-MI-MSPE) of Triazines from Soil Samples.
Separations, 5, (1), ArticleNo8-(2018)
   

Martín-Esteban A, Book chapter, Molecularly Imprinted Polymers: Providing Selectivity to Sample Preparation, 
In: Molecularly Imprinted Polymers for Analytical Chemistry Applications, Kutner W, Sharma PS (Eds.) Royal Society of Chemistry: Ch. 12, 379-411, (2018)
   

Barahona F et al., Molecularly imprinted polymer-hollow fiber microextraction of hydrophilic fluoroquinolone antibiotics in environmental waters and urine samples.
Journal of Chromatography A, 1587, 42-49, (2019)
   

Chrzanowska AM et al., The application of the supported liquid membrane and molecularly imprinted polymers as solid acceptor phase for selective extraction of biochanin A from urine.
Journal of Chromatography A, 1599, 9-16, (2019)
   

Díaz-Álvarez M et al., Molecularly imprinted polymer monolith containing magnetic nanoparticles for the stir-bar sorptive extraction of thiabendazole and carbendazim from orange samples.
Analytica Chimica Acta, 1045, 117-122, (2019)
   

Turiel E et al., Molecularly imprinted polymers-based microextraction techniques.
TrAC Trends in Analytical Chemistry, 118, 574-586, (2019)
   

Turiel E et al., Surface modified-magnetic nanoparticles by molecular imprinting for the dispersive solid-phase extraction of triazines from environmental waters.
Journal of Separation Science, 43, (16), 3304-3314, (2020)
   

Martín-Valero MJ

Villar-Navarro M et al., Easy, fast and environmental friendly method for the simultaneous extraction of the 16 EPA PAHs using magnetic molecular imprinted polymers (mag-MIPs).
Journal of Chromatography B, 1044-1045, 63-69, (2017)
   

Martín-Yerga D

Martín-Yerga D et al., Electrochemical determination of mercury: A review.
Talanta, 116, 1091-1104, (2013)
   

Martínez Bueno MJ

Martínez Bueno MJ et al., Determination of malachite green residues in fish using molecularly imprinted solid-phase extraction followed by liquid chromatography-linear ion trap mass spectrometry.
Analytica Chimica Acta, 665, (1), 47-54, (2010)
   

Martínez E

Farré M et al., Book chapter, Immunochemical and Receptor Technologies: The Role of Immunoassay, Immunoaffinity Chromatography, Immunosensors and Molecularly Imprinted Polymeric Sensors, 
In: Food Contaminants and Residue Analysis, Picó Y (Ed.) Elsevier: Amsterdam, Ch. 4, 91-130, (2008)
   

la Farré M et al., Book chapter, Immunochemical and Receptor Technologies: The Role of Immunoassay, Immunoaffinity Chromatography, Immunosensors and Molecularly Imprinted Polymeric Sensors, 
In: Food Contaminants and Residue Analysis, Picó Y (Ed.) Elsevier: Amsterdam, Ch. 4, 91-130, (2008)
   

Martínez Saavedra LN

Martínez Saavedra LN et al., Molecularly imprinted polymers for selective adsorption of quinoline: theoretical and experimental studies.
RSC Advances, 8, (50), 28775-28786, (2018)
   

Martínez-Máñez R

Martínez-Máñez R et al., Mimicking tricks from nature with sensory organic-inorganic hybrid materials.
Journal of Materials Chemistry, 21, (34), 12588-12604, (2011)
   

Salinas Y et al., Optical chemosensors and reagents to detect explosives.
Chemical Society Reviews, 41, (3), 1261-1296, (2012)
   

Martínez-Pacheco R

Alvarez-Lorenzo C et al., Soft contact lenses capable of sustained delivery of timolol.
Journal of Pharmaceutical Sciences, 91, (10), 2182-2192, (2002)
   

Martínez-Pérez-Cejuela H

Ten-Doménech I et al., Molecularly imprinted polymers for selective solid-phase extraction of phospholipids from human milk samples.
Microchimica Acta, 184, (9), 3389-3397, (2017)
   

Arias PG et al., Selective solid-phase extraction of organophosphorus pesticides and their oxon-derivatives from water samples using molecularly imprinted polymer followed by high-performance liquid chromatography with UV detection.
Journal of Chromatography A, 1626, Article461346-(2020)
   

Martínez-Ruiz P

Guzmán-Vázquez de Prada A et al., Solid-phase molecularly imprinted on-line preconcentration and voltammetric determination of sulfamethazine in milk.
Analytica Chimica Acta, 539, (1-2), 125-132, (2005)
   

Guzmán-Vázquez de Prada A et al., Molecularly imprinted polymer solid-phase extraction coupled to square wave voltammetry at carbon fibre microelectrodes for the determination of fenbendazole in beef liver.
Analytical and Bioanalytical Chemistry, 388, (1), 227-234, (2007)
   

Maruska A

Machtejevas E et al., Screening of oxazepine indole enantiomers by means of high performance liquid chromatography with imprinted polymer stationary phase.
Journal of Separation Science, 27, (7-8), 547-551, (2004)
   

Szumski M et al., Considerations on influence of charge distribution on determination of biomolecules and microorganisms and tailoring the monolithic (continuous bed) materials for bioseparations.
Journal of Biochemical and Biophysical Methods, 70, (1), 107-115, (2007)
   

Maruyama T

Araki K et al., Metal ion-selective membrane prepared by surface molecular imprinting.
Journal of Chromatography B, 818, (2), 141-145, (2005)
   

Maruška A

Rocco A et al., Enantiomeric separations by means of nano-LC.
Journal of Separation Science, 36, (3), 421-444, (2013)
   

Marx KA

Marx KA, Quartz crystal microbalance: A useful tool for studying thin polymer films and complex biomolecular systems at the solution-surface interface.
Biomacromolecules, 4, (5), 1099-1120, (2003)
   

Marx S

Marx S et al., Molecular imprinting in thin films of organic-inorganic hybrid sol-gel and acrylic polymers.
Chemistry of Materials, 13, (10), 3624-3630, (2001)
   

Fireman-Shoresh S et al., General method for chiral imprinting of sol-gel thin films exhibiting enantioselectivity.
Chemistry of Materials, 15, (19), 3607-3613, (2003)
   

Marx S et al., Molecular imprinting of sol gel polymers for the detection of paraoxon in water.
International Journal of Environmental Analytical Chemistry, 83, (7-8), 671-680, (2003)
   

Shustak G et al., Application of sol-gel technology for electroanalytical sensing.
Electroanalysis, 15, (5-6), 398-408, (2003)
   

Marx S et al., Parathion sensor based on molecularly imprinted sol-gel films.
Analytical Chemistry, 76, (1), 120-126, (2004)
   

Fireman-Shoresh S et al., Enantioselective, chirally templated sol-gel thin films.
Journal of the American Chemical Society, 127, (8), 2650-2655, (2005)
   

Fireman-Shoresh S et al., Chiral electrochemical recognition by very thin molecularly imprinted sol-gel films.
Langmuir, 21, (17), 7842-7847, (2005)
   

Fireman-Shoresh S et al., Enantioselective Sol-Gel Materials Obtained by Either Doping or Imprinting with a Chiral Surfactant.
Advanced Materials, 19, (16), 2145-2150, (2007)
   

Fireman-Shoresh S et al., Induction and detection of chirality in doped sol-gel materials: NMR and circular dichroism studies.
Journal of Materials Chemistry, 17, (6), 536-544, (2007)
   

Marx S et al., The Induction of Chirality in Sol-Gel Materials.
Accounts of Chemical Research, 40, (9), 768-776, (2007)
   

Marx S, Book chapter, Chiral Molecular Imprinting as a Tool for Drug Sensing, 
In: Cellular and Biomolecular Recognition: Synthetic and Non-Biological Molecules, Jelinek R (Ed.) Wiley-VCH: Weinheim, Ch. 4, 97-109, (2009)
   

Shahar T et al., Core-shell nanoparticles for gas phase detection based on silver nanospheres coated with a thin molecularly imprinted polymer adsorbed on a chemiresistor.
Nanoscale, 10, (37), 17593-17602, (2018)
   

Marx-Tibbon S

Marx-Tibbon S et al., Photostimulated imprinted polymers - a light-regulated medium for transport of amino-acids.
Journal of the Chemical Society-Chemical Communications, (10), 1261-1262, (1994)
   

Maryam A

Mujahid A et al., Molecularly imprinted poly(methyl methacrylate)-nickel sulfide hybrid membranes for adsorptive desulfurization of dibenzothiophene.
Separation and Purification Technology, 237, Article116453-(2020)
   

Marynova MA

Yakhkind MI et al., Molecular imprinted polymers for macrolides, aminoglycosides and some other biosynthetic antibiotics.
Antibiotiki i Khimioterapiya, 59, (7-8), 37-40, (2014)
   

Yakhkind MI et al., Molecularly imprinted polymers: possible use for isolation of biosynthetic antibiotics.
Russian Chemical Bulletin, 63, (5), 1049-1056, (2014)
   

Marzouk AA

El-Wekil MM et al., A novel molecularly imprinted sensing platform based on MWCNTs/AuNPs decorated 3D starfish like hollow nickel skeleton as a highly conductive nanocomposite for selective and ultrasensitive analysis of a novel pan-genotypic inhibitor velpatasvir in body fluids.
Journal of Molecular Liquids, 271, 105-111, (2018)
   

El-Wekil MM et al., Synthesis of Fe3O4 nanobead-functionalized 8-hydroxyquinoline sulfonic acid supported by an ion-imprinted biopolymer as a recognition site for Al3+ ions: estimation in human serum and water samples.
New Journal of Chemistry, 42, (12), 9828-9836, (2018)
   

Mas F

Garcés JL et al., Affinity distribution functions in multicomponent heterogeneous adsorption. Analytical inversion of isotherms to obtain affinity spectra.
Journal of Chemical Physics, 120, (19), 9266-9276, (2004)
   

Garcés JL et al., Conditional equilibrium constants in multicomponent heterogeneous adsorption: The conditional affinity spectrum.
Journal of Chemical Physics, 124, (4), Art. No. 044710-(2006)
   

Masamune S

Tanaka T et al., Reversible molecular adsorption as a tool to observe freezing and to perform design of heteropolymer gels.
Berichte Der Bunsen-Gesellschaft-Physical Chemistry Chemical Physics, 102, 1529-1533, (1998)
   

Alvarez-Lorenzo C et al., Polymer gels that memorize elements of molecular conformation.
Macromolecules, 33, (23), 8693-8697, (2000)
   

Enoki T et al., Frustrations in polymer conformation in gels and their minimization through molecular imprinting.
Physical Review Letters, 85, (23), 5000-5003, (2000)
   

Wang GQ et al., Gel catalysts that switch on and off.
Proceedings of the National Academy of Sciences of the United States of America, 97, (18), 9861-9864, (2000)
   

Alvarez-Lorenzo C et al., Reversible adsorption of calcium ions by imprinted temperature sensitive gels.
Journal of Chemical Physics, 114, (6), 2812-2816, (2001)
   

Maschmeyer T

Maschmeyer T et al., Book chapter, An Overview of Zeolite, Zeotype and Mesoporous Solids Chemistry: Design, Synthesis and Catalytic Properties, 
In: Microporous and Mesoporous Solid Catalysts, Derouane EG (Ed.) John Wiley & Sons, Ltd.: Chichester, UK, 1-38, (2006)
   

Masci A

Marino S et al., Proceeding, "Screen printing" for chemical sensor and biosensor production, 
Mazzei F, Pilloton R (Eds.), 1-23, (2000)
   

Masci G

Crescenzi V et al., Molecularly imprinted polymers binding clenbuterol.
Abstracts of Papers of the American Chemical Society, 216, (OLY), 341-341, (1998)
   

Brambilla G et al., Use of molecularly imprinted polymers in the solid-phase extraction of clenbuterol from animal feeds and biological matrices.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 759, (1), 27-32, (2001)
   

Masci G et al., Synthesis and LC characterization of clenbuterol molecularly imprinted polymers.
Journal of Pharmaceutical and Biomedical Analysis, 25, (2), 211-217, (2001)
   

Masci G et al., Uniform-sized clenbuterol molecularly imprinted polymers prepared with methacrylic acid or acrylamide as an interacting monomer.
Journal of Applied Polymer Science, 83, (12), 2660-2668, (2002)
   

Mascini M

Panasyuk T et al., Molecular imprinted polymers prepared by electropolymerization of Ni-(Protoporphyrin IX).
Analytical Letters, 31, (11), 1809-1824, (1998)
   

Berti F et al., Book chapter, One-Dimensional Polyaniline Nanotubes for Enhanced Chemical and Biochemical Sensing, 
In: Sensors and Microsystems, Neri G, Donato N, D'Amico A, Di Natale C (Eds.) Springer Netherlands: Ch. 48, 311-315, (2011)
   

Mascini M et al., Book chapter, Multiple Minima Hypersurfaces Procedures for Biomimetic Ligands Screening, 
In: Sensors and Microsystems, Neri G, Donato N, D'Amico A, Di Natale C (Eds.) Springer Netherlands: Ch. 65, 403-407, (2011)
   

Palchetti I et al., Book chapter, Biosensor Techniques for Environmental Monitoring, 
In: Nucleic Acid Biosensors for Environmental Pollution Monitoring, Mascini M, Palchetti I (Eds.) The Royal Society of Chemistry: Cambridge, Ch. 1, 1-16, (2011)
   

Mashelkar R

Kulkarni M et al., Book chapter, Biomimetic catalysis through molecularly imprinted polymers, 
In: Macromolecules - New Frontiers. Peoc. IUPAC Int. Symp. Adv. Polym. Sci. Technol, Srinivasan K (Ed.) Allied Publishers, Ltd: New Delhi, Ch. 1, 417-420, (1998)
   

Mashelkar RA

Karmalkar RN et al., Molecularly imprinted hydrogels exhibit chymotrypsin-like activity.
Macromolecules, 29, (4), 1366-1368, (1996)
   

Karmalkar RN et al., Pendent chain linked delivery systems .2. Facile hydrolysis through molecular imprinting effects.
Journal of Controlled Release, 43, (2-3), 235-243, (1997)
   

Joshi VP et al., Novel separation strategies based on molecularly imprinted adsorbents.
Chemical Engineering Science, 53, (13), 2271-2284, (1998)
   

Joshi VP et al., Effect of solvents on selectivity in separation using molecularly imprinted adsorbents: Separation of phenol and bisphenol A.
Industrial & Engineering Chemistry Research, 38, (11), 4417-4423, (1999)
   

Joshi VP et al., Molecularly imprinted adsorbents for positional isomer separation.
Journal of Chromatography A, 849, (2), 319-330, (1999)
   

Lele BS et al., Molecularly imprinted polymer mimics of chymotrypsin - 1. Cooperative effects and substrate specificity.
Reactive and Functional Polymers, 39, (1), 37-52, (1999)
   

Lele BS et al., Molecularly imprinted polymer mimics of chymotrypsin - 2. Functional monomers and hydrolytic activity.
Reactive and Functional Polymers, 40, (3), 215-229, (1999)
   

Lele BS et al., Productive and nonproductive substrate binding in enzyme mimics.
Polymer, 40, (14), 4063-4070, (1999)
   

Joshi VP et al., Enhancing adsorptive separations by molecularly imprinted polymers: Role of imprinting techniques and system parameters.
Chemical Engineering Science, 55, (9), 1509-1522, (2000)
   

Dhal PK et al., Book chapter, Bio-imprinting: polymeric receptors with and for biological macromolecules, 
In: Molecularly Imprinted Polymers: Man-Made Mimics of Antibodies and their Applications in Analytical Chemistry, Sellergren B (Ed.) Elsevier: Amsterdam, Ch. 10, 271-294, (2001)
   

Vaidya AA et al., Creating a macromolecular receptor by affinity imprinting.
Journal of Applied Polymer Science, 81, (5), 1075-1083, (2001)
   

Mashhadizadeh MH

Bojdi MK et al., Synthesis, characterization and application of novel lead imprinted polymer nanoparticles as a high selective electrochemical sensor for ultra-trace determination of lead ions in complex matrixes.
Electrochimica Acta, 136, 59-65, (2014)
   

Bojdi MK et al., Application of magnetic lamotrigine-imprinted polymer nanoparticles as an electrochemical sensor for trace determination of lamotrigine in biological samples.
RSC Advances, 6, (38), 32374-32380, (2016)
   

Mashinchian O

Mashinchian O et al., Cell-Imprinted Substrates Act as an Artificial Niche for Skin Regeneration.
ACS Applied Materials & Interfaces, 6, (15), 13280-13292, (2014)
   

Bonakdar S et al., Cell-Imprinted Substrates Modulate Differentiation, Redifferentiation, and Transdifferentiation.
ACS Applied Materials & Interfaces, 8, (22), 13777-13784, (2016)
   

Mason A

Korostynska O et al., Proceeding, Flexible Approach to Sensors Arrays Nanopatterning for Real-Time Water Contaminants Monitoring Platform, 
Hristoforou E, Vlachos DS (Eds.), 55-58, (2013)
   

Masoum S

Naeimi H et al., Highly efficient copper-imprinted functionalized mesoporous organosilica nanocomposites as a recyclable catalyst for click synthesis of 1, 2, 3-triazole derivatives under ultrasound irradiation: multivariate study by factorial design of experiments.
RSC Advances, 5, (20), 15006-15016, (2015)
   

Ansari S et al., A multi-walled carbon nanotube-based magnetic molecularly imprinted polymer as a highly selective sorbent for ultrasonic-assisted dispersive solid-phase microextraction of sotalol in biological fluids.
Analyst, 143, (12), 2862-2875, (2018)
   

Ghorbani A et al., Ultrasonic-assisted solid-phase extraction of sotalol in human urine samples using molecularly imprinted nanoparticles: Experimental design and adsorption study.
Separation Science and Technology, 53, (17), 2782-2796, (2018)
   

Ansari S et al., Molecularly imprinted polymers for capturing and sensing proteins: Current progress and future implications.
TrAC Trends in Analytical Chemistry, 114, 29-47, (2019)
   

Ansari S et al., Ultrasound-assisted dispersive solid-phase microextraction of capecitabine by multi-stimuli responsive molecularly imprinted polymer modified with chitosan nanoparticles followed by HPLC analysis.
Microchimica Acta, 187, (6), Article366-(2020)
   

Ansari S et al., A hybrid imprinted polymer based on magnetic graphene oxide and carbon dots for ultrasonic assisted dispersive solid-phase microextraction of oxycodone.
Microchemical Journal, 164, Article105988-(2021)
   

Ansari S et al., Recent advances and future trends on molecularly imprinted polymer-based fluorescence sensors with luminescent carbon dots.
Talanta, 223, Article121411-(2021)
   

Masoumi A

Hemmati K et al., Tragacanth gum-based nanogel as a superparamagnetic molecularly imprinted polymer for quercetin recognition and controlled release.
Carbohydrate Polymers, 136, 630-640, (2016)
   

Masoumi A et al., Recognition and selective adsorption of pesticides by superparamagnetic molecularly imprinted polymer nanospheres.
RSC Advances, 6, (55), 49401-49410, (2016)
   

Masoumi F

Masoumi F et al., Synthesis, characterization and application of a new nano-structured samarium(III) ion-imprinted polymer.
Polymer Bulletin, 76, (11), 5499-5516, (2019)
   

Masoumi M

Masoumi M et al., Synthesis and Recognition of Nano Pore Molecularly Imprinted Polymers of Thymol on the Surface of Modified Silica Nanoparticles.
Advances in Polymer Technology, 35, (2), 221-227, (2016)
   

Masqué N

Masqué N et al., New polymeric and other types of sorbents for solid-phase extraction of polar organic micropollutants from environmental water.
TrAC Trends in Analytical Chemistry, 17, (6), 384-394, (1998)
   

Masqué N et al., Synthesis and evaluation of a molecularly imprinted polymer for selective on-line solid-phase extraction of 4-nitrophenol from environmental water.
Analytical Chemistry, 72, (17), 4122-4126, (2000)
   

Masqué N et al., Molecularly imprinted polymers: new tailor-made materials for selective solid-phase extraction.
TrAC Trends in Analytical Chemistry, 20, (9), 477-486, (2001)
   

Caro E et al., Non-covalent and semi-covalent molecularly imprinted polymers for selective on-line solid-phase extraction of 4-nitrophenol from water samples.
Journal of Chromatography A, 963, (1-2), 169-178, (2002)
   

Masroor MJ

Jahangiri-Manesh A et al., Molecularly imprinted polymer-based chemiresistive sensor for detection of nonanal as a cancer related biomarker.
Microchemical Journal, 173, Article106988-(2022)
   

Massari T

Trotta F et al., A molecular imprinted membrane for molecular discrimination of tetracycline hydrochloride.
Journal of Membrane Science, 254, (1-2), 13-19, (2005)
   

Massaro RD

Smith CB et al., Fluorescence resonance energy transfer based MCM-EDTA-Tb3+-MES sensor.
Applied Spectroscopy, 62, (6), 604-610, (2008)
   

Massi A

Cavazzini A et al., Recent applications in chiral high performance liquid chromatography: A review.
Analytica Chimica Acta, 706, (2), 205-222, (2011)
   

Massinon O

Lemau de Talancé V et al., First steps towards conformationally selective artificial lectins: the chair-boat discrimination by molecularly imprinted polymers.
Chemical Communications, 48, (86), 10684-10686, (2012)
   

Massolini G

Quaglia M et al., Surface initiated molecularly imprinted polymer films: a new approach in chiral capillary electrochromatography.
Analyst, 126, (9), 1495-1498, (2001)
   

Massumi S

Massumi S et al., Highly sensitive and selective sensor based on molecularly imprinted polymer for voltammetric determination of Nevirapine in biological samples.
Journal of Electroanalytical Chemistry, 876, Article114508-(2020)
   

Massumi S et al., Corrigendum to 'Highly sensitive and selective sensor based on molecularly imprinted polymer for voltammetric determination of Nevirapine in biological samples'.
Journal of Electroanalytical Chemistry, 882, Article114975-(2021)
   

Massé R

Turkewitsch P et al., Book chapter, Molecular Imprinting, 
In: Advanced Concepts in Fluorescence Sensing, Pt. B: Macromolecular Sensing, Geddes CD, Lakowicz JR (Eds.) Springer: New York, Ch. 6, 157-209, (2005)
   

Mastai Y

Gabashvili A et al., Templating Mesoporous Silica with Chiral Block Copolymers and Its Application for Enantioselective Separation.
Journal of Physical Chemistry B, 111, (38), 11105-11110, (2007)
   

Paik P et al., Enantioselective Separation Using Chiral Mesoporous Spherical Silica Prepared by Templating of Chiral Block Copolymers.
ACS Applied Materials & Interfaces, 1, (8), 1834-1842, (2009)
   

Paik P et al., Chiral-mesoporous-polypyrrole nanoparticles: Its chiral recognition abilities and use in enantioselective separation.
Journal of Materials Chemistry, 20, (20), 4085-4093, (2010)
   

Paik P et al., Chiral separation abilities: Aspartic acid block copolymer-imprinted mesoporous silica.
Microporous And Mesoporous Materials, 129, (1-2), 82-89, (2010)
   

Medina DD et al., Book chapter, Biomimetic Polymers for Chiral Resolution and Antifreeze Applications, 
In: On Biomimetics, Pramatarova LD (Ed.) InTech: Ch. 15, 321-354, (2011)
   

Paik P et al., Synthesis of amino acid block-copolymer imprinted chiral mesoporous silica and its acoustically-induced optical Kerr effects.
Journal of Solid State Chemistry, 192, 127-131, (2012)
   

Moshe H et al., Chiral Thin Films of Metal Oxide.
Chemistry - A European Journal, 19, (31), 10295-10301, (2013)
   

Levi G et al., Imprinting Chirality in Silica Nanotubes by N-Stearoyl-serine Template.
ACS Applied Materials & Interfaces, 8, (35), 23356-23361, (2016)
   

Masteri-Farahani M

Khadem-Abbassi K et al., CdTe0.5S0.5/ZnS Quantum Dots Embedded in a Molecularly Imprinted Polymer for the Selective Optosensing of Dopamine.
Nanomaterials, 9, (5), ArticleNo693-(2019)
   

Mastroianni S

Tsow F et al., A Wearable and Wireless Sensor System for Real-Time Monitoring of Toxic Environmental Volatile Organic Compounds.
IEEE Sensors Journal, 9, (12), 1734-1740, (2009)
   

Mastronardi E

Mastronardi E et al., Personalized Medicine for Crops? Opportunities for the Application of Molecular Recognition in Agriculture.
Journal of Agricultural and Food Chemistry, 66, (26), 6457-6461, (2018)
   

Mastrorilli P

Mastrorilli P et al., Supported catalysts from polymerizable transition metal complexes.
Coordination Chemistry Reviews, 248, (3-4), 377-395, (2004)
   

Dell’Anna MM et al., Polymer Supported Catalysts Obtained from Metal-Containing Monomers.
Current Organic Chemistry, 17, (12), 1236-1273, (2013)
   

Masuda K

Kawanami Y et al., Imprinted polymer catalysts for the hydrolysis of p-nitrophenyl acetate.
Journal of Molecular Catalysis A: Chemical, 145, (1-2), 107-110, (1999)
   

Masuda S

Takeuchi T et al., Atrazine transformation using synthetic enzymes prepared by molecular imprinting.
Organic & Biomolecular Chemistry, 2, (18), 2563-2566, (2004)
   

Takeuchi T et al., Atrazine transformation using synthetic enzymes prepared by molecular imprinting (vol 2, pg 2563, 2004).
Organic & Biomolecular Chemistry, 2, (19), 2884-2884, (2004)
   

Masuda T

Teraguchi M et al., Enantioselective permeation through membranes of chiral helical polymers prepared by depinanylsilylation of poly(diphenylacetylene) with a high content of the pinanylsilyl group.
Macromolecules, 36, (26), 9694-9697, (2003)
   

Masui M

Takeuchi T et al., Molecularly Imprinted Tailor-Made Functional Polymer Receptors for Highly Sensitive and Selective Separation and Detection of Target Molecules.
Chromatography, 37, (2), 43-64, (2016)
   

Masumoto S

Nakamura Y et al., Molecularly imprinted polymer for glutathione by modified precipitation polymerization and its application to determination of glutathione in supplements.
Journal of Pharmaceutical and Biomedical Analysis, 144, 230-235, (2017)
   

Nakamura Y et al., Preparation of molecularly imprinted polymers for warfarin and coumachlor by multi-step swelling and polymerization method and their imprinting effects.
Journal of Chromatography A, 1516, 71-78, (2017)
   

Masumoto S et al., Molecularly imprinted polymers for arbutin and rutin by modified precipitation polymerization and their application for selective extraction of rutin in nutritional supplements.
Journal of Pharmaceutical and Biomedical Analysis, 205, Article114294-(2021)
   

Masunaga K

Masunaga K et al., Development of sensor surface with recognition of molecular substructure.
Sensors and Actuators B: Chemical, 130, (1), 330-337, (2008)
   

Masykur A

Masykur A et al., Preparation of Cu(II) ion-imprinted based on carboxymethyl chitosan and application as adsorbent of Cu(II) ion.
IOP Conference Series: Materials Science and Engineering, 509, Article012001-(2019)
   

Mat I

Lee TP et al., Micro-solid phase extraction of ochratoxin A, and its determination in urine using capillary electrophoresis.
Microchimica Acta, 180, (11-12), 1149-1156, (2013)
   

Matassa R

Matassa R et al., Supramolecular Structure of Extrinsically Chiral Porphyrin Hetero-Assemblies and Achiral Analogues.
Advanced Materials, 19, (22), 3961-3967, (2007)
   

Mateescu A

Mateescu A et al., Thin Hydrogel Films for Optical Biosensor Applications.
Membranes, 2, (1), 40-69, (2012)
   

Matejicek D

Matejicek D et al., The use of molecularly imprinted polymers for the multicomponent determination of endocrine-disrupting compounds in water and sediment.
Journal of Separation Science, 36, (6), 1097-1103, (2013)
   

Matejicek D et al., Online molecularly imprinted solid-phase extraction coupled to liquid chromatography-tandem mass spectrometry for the determination of hormones in water and sediment samples.
Journal of Separation Science, 36, (9-10), 1509-1515, (2013)
   

Matern AI

Kozitsina AN et al., Determination of urea and creatinine by chronoamperometry.
Journal of Analytical Chemistry, 69, (8), 758-762, (2014)
   

Mathew A

Moorthy MS et al., Ion-imprinted mesoporous silica hybrids for selective recognition of target metal ions.
Microporous And Mesoporous Materials, 180, 162-171, (2013)
   

Mathew B

Philip CM et al., Design of EGDMA-Crosslinked Theophylline Imprinted Polymer with High Specificity and Selectivity.
Journal of Macromolecular Science, Part A, 45, (4), 335-343, (2008)
   

Deepthi KP et al., Effect of Porogen on the Catalytic Activity of Molecular Imprinted Polymers.
Asian Journal of Chemistry, 25, (4), 1985-1990, (2013)
   

Augustine A et al., Molecular Imprinted Membranes as Synthetic Receptors for the Analysis of Progesterone in Human Urine.
Research Journal of Recent Sciences, 3, 50-55, (2014)
   

Augustine A et al., Molecular imprinted specific sorbents based on multiwalled carbon nanotube for the detection of progesterone through chromatographic urine analysis.
International Journal of Interdisciplinary and Multidisciplinary Studies, 1, (7), 140-148, (2014)
   

Augustine A et al., Synthesis of Carbon Nanotube Incorporated Molecular Imprinted Polymer with Binding Affinity towards Testosterone.
ISRN Polymer Science, 2014, Article ID 790583-(2014)
   

Girija P et al., Bioremediation of waste water containing hazardous cadmium ion with ion imprinted interpenetrating polymer networks.
Advances in Environmental Chemistry, 2014, Article ID 394841-(2014)
   

P G et al., Selective Removal of Transition Metal ions from Waste water By ion Imprinting Technology.
International Journal of ChemTech Research, 6, (4), 2438-2445, (2014)
   

P SM et al., Histamine H2-receptor antagonist imprinted-poly (vinylimidazole) grafted multiwalled carbon nanotubes.
Journal of Chemical and Pharmaceutical Research, 6, (12), 394-402, (2014)
   

Parameswaran G et al., Bioremediation of Waste Water Containing Hazardous Cadmium Ion with Ion Imprinted Interpenetrating Polymer Networks.
Advances in Environmental Chemistry, 2014, Article ID 394841-(2014)
   

Sooraj MP et al., Structure-specific sorbent based on nanostructures for selective recognition of cimetidine from its structural analogues.
Journal of Applied Polymer Science, 131, (20), n/a-n/a, (2014)
   

P. G et al., Design of copper ion imprinted polymers based on crosslinked 4-vinylpyridine.
Journal of Chemical and Pharmaceutical Research, 7, (2), 910-916, (2015)
   

S BM et al., Design of Copper Ion Selective Polymer by Molecular Imprinting Approach.
International Journal of Latest Research in Science and Technology, 4, (2), 154-160, (2015)
   

Sooraj MP et al., Artificial Recognition Sorbents on Multiwalled Carbon Nanotubes for the Separation of Aspirin from its Structural Analogues.
International Journal of Scientific & Engineering Research, 6, (9), 723-733, (2015)
   

Sooraj MP et al., Highly selective nanocomposite sorbents for the specific recognition of S-ibuprofen from structurally related compounds.
Applied Nanoscience, 6, (5), 659-671, (2016)
   

Sajini T et al., Book chapter, Photoresponsive materials containing azomoieties - a facile approach in molecular imprinting, 
In: Mathematical and Analytical Techniques, Haghi AK, Balköse D, Mukbaniani OV, Mercader AG (Eds.) Apple Academic Press: Oakville, Ontario, Ch. 13, (2017)
   

Aravind A et al., An electrochemical sensor and sorbent based on mutiwalled carbon nanotube supported ion imprinting technique for Ni(II) ion from electroplating and steel industries.
SN Applied Sciences, 1, (1), ArticleNo23-(2018)
   

Aravind A et al., Tailoring of nanostructured material as an electrochemical sensor and sorbent for toxic Cd(II) ions from various real samples.
Journal of Analytical Science and Technology, 9, (1), ArticleNo22-(2018)
   

Aravind A et al., Electrochemical sensor based on nanostructured ion imprinted polymer for the sensing and extraction of Cr(III) ions from industrial wastewater.
Polymer International, 67, (12), 1595-1604, (2018)
   

Sebastian M et al., Multiwalled carbon nanotube based ion imprinted polymer as sensor and sorbent for environmental hazardous cobalt ion.
Journal of Macromolecular Science, Part A, 55, (6), 455-465, (2018)
   

Sebastian M et al., Ion imprinting approach for the fabrication of an electrochemical sensor and sorbent for lead ions in real samples using modified multiwalled carbon nanotubes.
Journal of Materials Science, 53, (5), 3557-3572, (2018)
   

Sajini T et al., A brief overview of molecularly imprinted polymers supported on titanium dioxide matrices.
Materials Today Chemistry, 11, 283-295, (2019)
   

Sajini T et al., Kinetic and thermodynamic studies of molecularly imprinted polymers for the selective adsorption and specific enantiomeric recognition of D-mandelic acid.
Journal of Polymer Research, 26, (4), Article88-(2019)
   

Sajini T et al., Computational Design and Fabrication of Enantioselective Recognition Sorbents for L-phenylalanine Benzyl Ester on Multiwalled Carbon Nanotubes Using Molecular Imprinting Technology.
Chinese Journal of Polymer Science, 37, (12), 1305-1318, (2019)
   

Sajini T et al., Tailoring of photo-responsive molecularly imprinted polymers on multiwalled carbon nanotube as an enantioselective sensor and sorbent for L-PABE.
Composites Science and Technology, 181, Article107676-(2019)
   

Sajini T et al., Rational design and synthesis of photo-responsive molecularly imprinted polymers for the enantioselective intake and release of l-phenylalanine benzyl ester on multiwalled carbon nanotubes.
Polymer, 173, 127-140, (2019)
   

Sooraj MP et al., Fabrication of a Structure-Specific Molecular Imprinted Polymer-Based Electrochemical Sensor Based on CuNP-Decorated Vinyl-Functionalized Graphene for the Detection of Parathion Methyl in Vegetable and Fruit Samples.
Food Analytical Methods, 12, (4), 1028-1039, (2019)
   

Sooraj MP et al., CuNPs decorated molecular imprinted polymer on MWCNT for the electrochemical detection of l-DOPA.
Arabian Journal of Chemistry, 13, (1), 2483-2495, (2020)
   

Girija P et al., Synthesis and characterization of Metal Ion Imprinted Alginate Network.
International Journal of Research in Engineering and Science, 9, (12), 33-35, (2021)
   

Sajini T et al., A brief overview of molecularly imprinted polymers: Highlighting computational design, nano and photo-responsive imprinting.
Talanta Open, 4, Article100072-(2021)
   

Mathew D

Mathew D et al., Amidolysis of phenylalanine-p-nitroanilide using TSA impinted macromatric polymer catalysts: Effect of porogen on catalytic efficiency.
Journal of Chemical and Pharmaceutical Research, 7, (6), 573-583, (2015)
   

Mathew D et al., Amidase activity of phosphonate analogue imprinted chymotrypsin mimics in shape-selective, substrate-specific and enantioselective amidolysis of l-phenylalanine-p-nitroanilides.
Journal of Molecular Catalysis A: Chemical, 415, 65-73, (2016)
   

Mathew D et al., Amidase activity of phosphonate TSA-built polymer catalysts derived from organic monomers in the amidolysis of amino acid p-nitroanilides.
Applied Catalysis A: General, 528, 93-103, (2016)
   

Mathew D et al., Substrate Specific Amidolysis of p-Nitroanilides of Amino Acids using Phosphonate Analogue Imprinted Chymotrypsin Mimics.
SB Academic Review, 19, (1), 41-49, (2016)
   

Mathew D et al., Phosphonate TSA-built macromatric polymer catalysts as chymotrypsin mimics for the amidolysis of amino acid p-nitroanilides: Effect of the nature and extent of crosslinker on amidase activities.
Polymer, 111, 285-296, (2017)
   

Mathew D et al., Geometrical effect of 3D-memory cavity on the imprinting efficiency of transition-state analogue-built artificial hydrolases.
Polymer Bulletin, 75, (9), 3883-3896, (2018)
   

Mathew D et al., Biomimetic recognition and peptidase activities of transition state analogue imprinted chymotrypsin mimics.
Reactive and Functional Polymers, 124, 121-128, (2018)
   

Mathew D et al., Design, synthesis and characterization of enzyme-analogue-built polymer catalysts as artificial hydrolases.
Artificial Cells, Nanomedicine, and Biotechnology, 47, (1), 1149-1172, (2019)
   

Mathew J

Mathew J et al., Molecular imprinting approach for the recognition of adenine in aqueous-medium and hydrolysis of adenosine 5'-triphosphate.
Bioconjugate Chemistry, 6, (5), 524-528, (1995)
   

Mathew-Krotz J

Mathew-Krotz J et al., Imprinted polymer membranes for the selective transport of targeted neutral molecules.
Journal of the American Chemical Society, 118, (34), 8154-8155, (1996)
   

Mathiasson L

Zorita S et al., Selective determination of acidic pharmaceuticals in wastewater using molecularly imprinted solid-phase extraction.
Analytica Chimica Acta, 626, (2), 147-154, (2008)
   

Mathieu F

Nicu L et al., Proceeding, Integrative technology-based approach of microelectromechanical systems (MEMS) for biosensing applications, 
4475-4478, (2012)
   

Dezest D et al., Multiplexed functionalization of nanoelectromechanical systems with photopatterned molecularly imprinted polymers.
Journal of Micromechanics and Microengineering, 29, (2), Article025013-(2019)
   

Mathieu-Scheers E

Mathieu-Scheers E et al., Trace anthracene electrochemical detection based on electropolymerized-molecularly imprinted polypyrrole modified glassy carbon electrode.
Journal of Electroanalytical Chemistry, 848, Article113253-(2019)
   

Mathur A

Mathur A et al., Development of a Biosensor for Detection of Pleural Mesothelioma Cancer Biomarker Using Surface Imprinting.
PLoS ONE, 8, (3), Article Number: e57681-(2013)
   

Mathur VB

Barde LN et al., Development of molecularly imprinted polymer as sustain release drug carrier for propranolol HCL.
Drug Development and Industrial Pharmacy, 39, (8), 1247-1253, (2013)
   

Matia-González AM

King HA et al., Generation of ribosome imprinted polymers for sensitive detection of translational responses.
Scientific Reports, 7, (1), ArticleNo6542-(2017)
   

Matias IR

Elosua C et al., Book chapter, Fiber Optic Sensors Based on Nanostructured Materials, 
In: Lab-on-Fiber Technology, Cusano A, Consales M, Crescitelli A, Ricciardi A (Eds.) Springer International Publishing: Cham, Ch. 13, 277-299, (2015)
   

Matin AA

Farhadi K et al., Removal of malachite green from aqueous solutions using molecularly imprinted polymer.
Desalination and Water Treatment, 24, (1-3), 20-27, (2010)
   

Farhadi K et al., Microextraction techniques in therapeutic drug monitoring.
Biomedical Chromatography, 26, (8), 972-989, (2012)
   

Alipanahpour Dil E et al., Magnetic dual-template molecularly imprinted polymer based on syringe-to-syringe magnetic solid-phase microextraction for selective enrichment of p-Coumaric acid and ferulic acid from pomegranate, grape, and orange samples.
Food Chemistry, 325, Article126902-(2020)
   

Matis KA

Kyzas GZ et al., New Biosorbent Materials: Selectivity and Bioengineering Insights.
Processes, 2, (2), 419-440, (2014)
   

Kyzas GZ et al., Nanoadsorbents for pollutants removal: A review.
Journal of Molecular Liquids, 203, 159-168, (2015)
   

Matricardi P

Puoci F et al., Molecularly imprinted polymers for 5-fluorouracil release in biological fluids.
Molecules, 12, (4), 805-814, (2007)
   

Matsuda K

Minoura N et al., Molecularly imprinted polymer membranes with photoregulated template binding.
Chemistry of Materials, 15, (25), 4703-4704, (2003)
   

Minoura N et al., Preparation of azobenzene-containing polymer membranes that function in photoregulated molecular recognition.
Macromolecules, 37, (25), 9571-9576, (2004)
   

Matsuda R

Hage DS et al., Pharmaceutical and biomedical applications of affinity chromatography: Recent trends and developments.
Journal of Pharmaceutical and Biomedical Analysis, 69, 93-105, (2012)
   

Matsuda Y

Matsuda Y et al., Synthesis of functional capsule gel incorporated with nicotine imprinted polymer and adsorptive characteristic for nicotine.
Journal of the Materials Science Society of Japan, 37, (4), 195-199, (2000)
   

Matsuguchi M

Sasagawa Y et al., Detection of GOD Using a Molecular Imprinting Polymer Thin Film.
Nippon Kagakkai Koen Yokoshu, 75, 179-(1998)
   

Matsuguchi M et al., Molecular imprinting strategy for solvent molecules and its application for QCM-based VOC vapor sensing.
Sensors and Actuators B: Chemical, 113, (1), 94-99, (2006)
   

Matsui J

Matsui J et al., Molecular recognition in continuous polymer rods prepared by a molecular imprinting technique.
Analytical Chemistry, 65, (17), 2223-2224, (1993)
   

Kugimiya A et al., Recognition of sialic-acid using molecularly imprinted polymer.
Analytical Letters, 28, (13), 2317-2323, (1995)
   

Matsui J et al., Atrazine-selective polymer prepared by molecular imprinting technique.
Chemistry Letters, 24, (6), 489-489, (1995)
   

Matsui J et al., A molecularly imprinted synthetic polymer receptor selective for atrazine.
Analytical Chemistry, 67, (23), 4404-4408, (1995)
   

Matsui J et al., Fluoro-functionalized molecularly imprinted polymers selective for herbicides.
Chemistry Letters, 24, (11), 1007-1008, (1995)
   

Matsui J et al., Rod-type affinity media for liquid-chromatography prepared by in-situ-molecular imprinting.
Analytical Sciences, 11, (6), 1017-1019, (1995)
   

Tanabe K et al., Recognition of barbiturates in molecularly imprinted copolymers using multiple hydrogen-bonding.
Journal of the Chemical Society-Chemical Communications, (22), 2303-2304, (1995)
   

Kugimiya A et al., Recognition in novel molecularly imprinted polymer sialic acid receptors in aqueous media.
Analytical Letters, 29, (7), 1099-1107, (1996)
   

Matsui J et al., Metal ion mediated recognition in molecularly imprinted polymers.
Analytica Chimica Acta, 335, (1-2), 71-77, (1996)
   

Matsui J et al., Carbon-carbon bond formation using substrate selective catalytic polymers prepared by molecular imprinting: An artificial class II aldolase.
Journal of Organic Chemistry, 61, (16), 5414-5417, (1996)
   

Matsui J et al., A molecularly imprinted nicotine-selective polymer.
Analytical Letters, 29, (12), 2071-2078, (1996)
   

Matsui J et al., Highly stereoselective molecularly imprinted polymer synthetic receptors for cinchona alkaloids.
Tetrahedron: Asymmetry, 7, 1357-1361, (1996)
   

Nicholls IA et al., Some recent developments in the preparation of novel recognition systems: A recognition site for the selective catalysis of an aldol condensation using molecular imprinting and specific affinity motifs for a-chymotrypsin using a phage display peptide library.
Journal of Molecular Recognition, 9, (5-6), 652-657, (1996)
   

Takeuchi T et al., Molecular imprinting: An approach to ''tailor-made'' synthetic polymers with biomimetic functions.
Acta Polymerica, 47, (11-12), 471-480, (1996)
   

Kugimiya A et al., Sialic acid-imprinted polymers using noncovalent interactions.
Materials Science & Engineering C-Biomimetic Materials Sensors And Systems, 4, 263-266, (1997)
   

Matsui J et al., Solid-phase extraction of a triazine herbicide using a molecularly imprinted synthetic receptor.
Analytical Communications, 34, (3), 85-87, (1997)
   

Matsui J et al., 2-(trifluoromethyl)acrylic acid: A novel functional monomer in non-covalent molecular imprinting.
Analytica Chimica Acta, 343, (1-2), 1-4, (1997)
   

Matsui J et al., A molecularly imprinted polymer rod as nicotine selective affinity media prepared with 2-(trifluoromethyl)acrylic acid.
Analytical Communications, 34, (7), 199-200, (1997)
   

Matsui J et al., An in-situ approach to molecularly imprinted "tailor-made" separation media.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 157-157, (1997)
   

Takeuchi T et al., TFMAA: A novel functional monomer for non-covalent molecular imprinting.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 112-112, (1997)
   

Yano K et al., Stereoselective recognition of dipeptide derivatives in molecularly imprinted polymers which incorporate an L-valine derivative as a novel functional monomer.
Analytica Chimica Acta, 357, (1-2), 91-98, (1997)
   

Kugimiya A et al., Synthesis of castasterone selective polymers prepared by molecular imprinting.
Analytica Chimica Acta, 365, (1-3), 75-79, (1998)
   

Matsui J et al., Molecular recognition in cinchona alkaloid molecular imprinted polymer rods.
Analytica Chimica Acta, 365, (1-3), 89-93, (1998)
   

Matsui J et al., Molecularly imprinted receptor having metalloporphyrin-based signaling binding site.
Analytical Communications, 35, (7), 225-227, (1998)
   

Matsui J et al., Design and preparation of molecularly imprinted atrazine-receptor polymers: Investigation of functional monomers and solvents.
Analytical Sciences, 14, (4), 699-702, (1998)
   

Takeuchi T et al., Book chapter, Recognition of drugs and herbicides: Strategy in selection of functional monomers for noncovalent molecular imprinting, 
In: Molecular and Ionic Recognition with Imprinted Polymers, Bartsch RA, Maeda M (Eds.) The American Chemical Society: Washington DC, Ch. 8, 119-134, (1998)
   

Yano K et al., Molecularly imprinted polymers which mimic multiple hydrogen bonds between nucleotide bases.
Analytica Chimica Acta, 363, (2-3), 111-117, (1998)
   

Takeuchi T et al., Combinatorial molecular imprinting: An approach to synthetic polymer receptors.
Analytical Chemistry, 71, (2), 285-290, (1999)
   

Matsui J et al., Atrazine-selective polymers prepared by molecular imprinting of trialkylmelamines as dummy template species of atrazine.
Analytical Chemistry, 72, (8), 1810-1813, (2000)
   

Matsui J et al., Solid-phase extraction with a dibutylmelamine-imprinted polymer as triazine herbicide-selective sorbent.
Journal of Chromatography A, 889, (1-2), 25-31, (2000)
   

Matsui J et al., Molecularly imprinted fluorescent-shift receptors prepared with 2-(trifluoromethyl)acrylic acid.
Analytical Chemistry, 72, (14), 3286-3290, (2000)
   

Matsui J et al., Molecularly imprinted polymer as 9-ethyladenine receptor having a porphyrin-based recognition center.
Journal of the American Chemical Society, 122, (21), 5218-5219, (2000)
   

Takeuchi T et al., Miniaturized molecularly imprinted continuous polymer rods.
HRC - Journal of High Resolution Chromatography, 23, (1), 44-46, (2000)
   

Matsui J et al., Book chapter, Techniques for the in situ preparation of imprinted polymers, 
In: Molecularly Imprinted Polymers: Man-Made Mimics of Antibodies and their Applications in Analytical Chemistry, Sellergren B (Ed.) Elsevier: Amsterdam, Ch. 13, 325-340, (2001)
   

Matsui J et al., Biomimetic Chip Prepared by Linear Polymer-based Molecular Imprinting.
Nippon Kagakkai Koen Yokoshu, 80, 237-(2001)
   

Takeuchi T et al., Molecularly imprinted polymers with metalloporphyrin-based molecular recognition sites coassembled with methacrylic acid.
Analytical Chemistry, 73, (16), 3869-3874, (2001)
   

Takeuchi T et al., Molecularly imprinted polymer library on a microtiter plate. High-throughput synthesis and assessment of cinchona alkaloid-imprinted polymers.
Instrumentation Science & Technology, 29, (1), 1-9, (2001)
   

Takeuchi T et al., Combinatorial molecular imprinting for formation of atrazine decomposing polymers.
Chemistry Letters, 30, (6), 530-531, (2001)
   

Matsui J et al., Molecular imprinting in alcohols: utility of a pre-polymer based strategy for synthesizing stereoselective artificial receptor polymers in hydrophilic media.
Analytica Chimica Acta, 466, (1), 11-15, (2002)
   

Matsui J et al., Solid-phase molecular imprinting utilizing poly(methacrylic acid)-modified resins.
Nippon Kagakkai Koen Yokoshu, 82, 273-(2002)
   

Nishimoto K et al., New Central Dogma in Molecular Ecology. (23): Thermodynamic assessment of molecularly imprinted polymers prepared by cross-linking poly(methacrylic acid) derivatives.
Nippon Kagakkai Koen Yokoshu, 81, (2), 864-(2002)
   

Ochi Y et al., New Central Dogma in Molecular Ecology. (22): Molecular imprinting utilizing water-soluble poly(methacrylic acid) derivatives for recognition of biologically active compounds.
Nippon Kagakkai Koen Yokoshu, 81, (2), 864-(2002)
   

Matsui J et al., Synthetic cinchonidine receptors obtained by cross-linking linear poly(methacrylic acid) derivatives as an alternative molecular imprinting technique.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 223-229, (2004)
   

Matsui J et al., Composite of Au nanoparticles and molecularly imprinted polymer as a sensing material.
Analytical Chemistry, 76, (5), 1310-1315, (2004)
   

Takeuchi T et al., Atrazine transformation using synthetic enzymes prepared by molecular imprinting.
Organic & Biomolecular Chemistry, 2, (18), 2563-2566, (2004)
   

Takeuchi T et al., Atrazine transformation using synthetic enzymes prepared by molecular imprinting (vol 2, pg 2563, 2004).
Organic & Biomolecular Chemistry, 2, (19), 2884-2884, (2004)
   

Matsui J et al., SPR sensor chip for detection of small molecules using molecularly imprinted polymer with embedded gold nanoparticles.
Analytical Chemistry, 77, (13), 4282-4285, (2005)
   

Matsui J et al., Molecular Imprinting within a Single Peptide Molecule for Synthesizing a Water-Soluble ATP Receptor.
Pept. Sci., 396-397, (2006)
   

Matsui J et al., Development of a tailor-made functional peptide by template-directed intramolecular cross-linking.
Polymer Preprints, Japan, 55, (2), 5328-5329, (2006)
   

Matsui J et al., Photodimerization of anthryl moieties in a poly(methacrylic acid) derivative as reversible cross-linking step in molecular imprinting.
Chemistry Letters, 35, (1), 80-81, (2006)
   

Matsui J et al., Molecularly-imprinted polymeric logic gates selective for predetermined chemical input species.
Chemical Communications, (30), 3217-3219, (2006)
   

Matsui J, Polymeric Molecular Logic Gates Constituted by Molecular Imprinting.
Kobunshi, 56, (12), 987-987, (2007)
   

Matsui J et al., Molecular Imprinting under Molecular Crowding Conditions: An Aid to the Synthesis of a High-Capacity Polymeric Sorbent for Triazine Herbicides.
Analytical Chemistry, 79, (4), 1749-1757, (2007)
   

Matsui J et al., An approach to peptide-based ATP receptors by a combination of random selection, rational design, and molecular imprinting.
Biosensors and Bioelectronics, 25, (3), 563-567, (2009)
   

Matsui J et al., Molecularly imprinted nanocomposites for highly sensitive SPR detection of a non-aqueous atrazine sample.
Analyst, 134, (1), 80-86, (2009)
   

Matsui J et al., Face-to-face porphyrin moieties assembled with spacing for pyrazine recognition in molecularly imprinted polymers.
Biosensors and Bioelectronics, 25, (3), 635-639, (2009)
   

Nagata T et al., Monodispersed Molecularly Imprinted Polymer Beads with Enhanced Atrazine Retention Ability Synthesized with Polymeric Diluents.
Analytical Letters, 45, (9), 977-985, (2012)
   

Takayose M et al., A fluorous synthetic receptor that recognizes perfluorooctanoic acid (PFOA) via fluorous interaction obtained by molecular imprinting.
Analyst, 137, (12), 2762-2765, (2012)
   

Matsui J et al., Book chapter, Molecularly Imprinted Nanocomposites for Highly Sensitive SPR Detection, 
In: Handbook of Molecular Imprinting - Advanced Sensor Applications, Lee SW, Kunitake T (Eds.) Pan Stanford Publishing Pte. Ltd.: Singapore, Ch. 9, 333-358, (2013)
   

Takata A et al., ATP-binding peptide-hydrogel composite synthesized by molecular imprinting on beads.
Molecular Imprinting, 3, (1), 65-70, (2015)
   

Nogami H et al., Nicotine-Selective Polymeric Adsorbent Obtained by Molecular Imprinting with Excess Use of Itaconic Acid.
Chromatography, 38, (1), 15-21, (2017)
   

Matsui M

Shiomi T et al., A method for the molecular imprinting of hemoglobin on silica surfaces using silanes.
Biomaterials, 26, (27), 5564-5571, (2005)
   

Matsui R

Matsui J et al., Rod-type affinity media for liquid-chromatography prepared by in-situ-molecular imprinting.
Analytical Sciences, 11, (6), 1017-1019, (1995)
   

Matsui T

Matsui T et al., Improved Method of Molecular Imprinting of Cyclodextrin on Silica-gel Surface for the Preparation of Stable Stationary HPLC Phase.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 56, (1-2), 39-44, (2006)
   

Osawa T et al., Importance of the position of vinyl group on [beta]-cyclodextrin for the effective imprinting of amino acid derivatives and oligopeptides in water.
Macromolecules, 39, (7), 2460-2466, (2006)
   

Matsui Y

Kawakami K et al., Enhancement of protease activity in transesterification of glycidol with vinyl n-butyrate by entrapment into alkyl-substituted silicates and pretreatment with a substrate.
Biocatalysis and Biotransformation, 21, (1), 49-52, (2003)
   

Matsuishi T

Matsuishi T et al., Definitive evidence for enantioselective catalysis over molecular footprint catalytic cavities chirally imprinted on a silica(alumina) gel surface.
Chemistry Letters, 21, (10), 1921-1924, (1992)
   

Matsuishi T et al., Footprint catalysis 9. Molecular footprint catalytic cavities imprinted with chiral hydantoins - enantioselective hydantoinase mimics.
Bulletin of the Chemical Society of Japan, 67, (3), 748-756, (1994)
   

Matsumoto C

Ikuta M et al., Union and Characterization of Molecularly Imprinted Polymer for Prasugrel Drug Base on 2-Hydroxyethyl Methacrylate Monomer in Biological and Pharmaceutical Samples.
Journal of Chemical Engineering and Applied Chemistry, 1, (1), 33-36, (2019)
   

Matsumoto H

Kubo T et al., Selective Separation of Hydroxy Poly-Chlorinated Biphenyls (Hydroxy PCBs).
Chromatography, 27, (Supplement 1), 45-46, (2006)
   

Kubo T et al., Selective separation of hydroxy polychlorinated biphenyls (HO-PCBs) by the structural recognition on the molecularly imprinted polymers: Direct separation of the thyroid hormone active analogues from mixtures.
Analytica Chimica Acta, 589, (2), 180-185, (2007)
   

Yoshikawa M et al., Molecularly Imprinted Nanofiber Membranes from Carboxylated Polysulfone by Electrospray Deposition.
Macromolecular Rapid Communications, 28, (21), 2100-2105, (2007)
   

Yoshikawa M et al., Molecularly imprinted nanofiber membranes.
Current Opinion in Chemical Engineering, 1, (1), 18-26, (2011)
   

Takeuchi T et al., Molecularly Imprinted Tailor-Made Functional Polymer Receptors for Highly Sensitive and Selective Separation and Detection of Target Molecules.
Chromatography, 37, (2), 43-64, (2016)
   

Matsumoto K

Matsumoto K et al., Stimuli-Responsive Hydrogels Using Biomolecular Functions.
Kobunshi Ronbunshu, 71, (4), 125-142, (2014)
   

Matsumoto K et al., QCM sensing of bisphenol A using molecularly imprinted hydrogel/conducting polymer matrix.
Polymer Journal, 48, 525-532, (2016)
   

Matsumoto K et al., Conformationally Regulated Molecular Binding and Release of Molecularly Imprinted Polypeptide Hydrogels That Undergo Helix-Coil Transition.
Macromolecules, 50, (5), 2136-2144, (2017)
   

Matsumoto S

Lee SW et al., Label-Free Creatinine Optical Sensing Using Molecularly Imprinted Titanium Dioxide-Polycarboxylic Acid Hybrid Thin Films: A Preliminary Study for Urine Sample Analysis.
Chemosensors, 9, (7), ArticleNo185-(2021)
   

Matsumoto T

Rachkov A et al., Molecularly imprinted polymers prepared in aqueous solution selective for [Sar(1), Ala(8)]angiotensin II.
Analytica Chimica Acta, 504, (1), 191-197, (2004)
   

Nemoto K et al., Simple and Effective 3D Recognition of Domoic Acid Using a Molecularly Imprinted Polymer.
Journal of the American Chemical Society, 129, (44), 13626-13632, (2007)
   

Nemoto K et al., Simple and Effective 3D Recognition of Domoic Acid Using a Molecularly Imprinted Polymer [J. Am. Chem. Soc. 2007, 129, 13626-13632].
Journal of the American Chemical Society, 130, (2), 774-774, (2008)
   

Matsumoto Y

Takeuchi T et al., Molecularly Imprinted Nanogels Acquire Stealth In Situ by Cloaking Themselves with Native Dysopsonic Proteins.
Angewandte Chemie International Edition, 56, (25), 7088-7092, (2017)
   

Matsunaga H

Matsunaga H, Recognition, separation and concentration of metal ions with chelating resins or chelating reagent impregnated resins (Review).
Bunseki Kagaku, 50, (2), 89-106, (2001)
   

Hoshina K et al., Molecularly imprinted polymers for simultaneous determination of antiepileptics in river water samples by liquid chromatography-tandem mass spectrometry.
Journal of Chromatography A, 1216, (25), 4957-4962, (2009)
   

Hoshina K et al., Simultaneous determination of non-steroidal anti-inflammatory drugs in river water samples by liquid chromatography-tandem mass spectrometry using molecularly imprinted polymers as a pretreatment column.
Journal of Pharmaceutical and Biomedical Analysis, 55, (5), 916-922, (2011)
   

Haginaka J et al., Preparation of molecularly imprinted polymers for organophosphates and their application to the recognition of organophosphorus compounds and phosphopeptides.
Analytica Chimica Acta, 748, 1-8, (2012)
   

Haginaka J et al., Monodispersed Molecularly Imprinted Polymer for Creatinine by Modified Precipitation Polymerization.
Analytical Sciences, 28, (4), 315-317, (2012)
   

Hiratsuka Y et al., Preparation of magnetic molecularly imprinted polymers for bisphenol A and its analogues and their application to the assay of bisphenol A in river water.
Journal of Pharmaceutical and Biomedical Analysis, 75, 180-185, (2013)
   

Kitabatake T et al., Preparation of monodisperse curcumin-imprinted polymer by precipitation polymerization and its application for the extraction of curcuminoids from Curcuma longa L.
Analytical and Bioanalytical Chemistry, 405, (20), 6555-6561, (2013)
   

Miura C et al., Monodisperse, molecularly imprinted polymers for creatinine by modified precipitation polymerization and their applications to creatinine assays for human serum and urine.
Journal of Pharmaceutical and Biomedical Analysis, 85, 288-294, (2013)
   

Yasuyama T et al., A Study of the Various Factors That Affect the Properties of Molecularly Imprinted Polymers.
Chemical and Pharmaceutical Bulletin, 61, (5), 546-550, (2013)
   

Funaya N et al., Preparation of Magnetic Molecularly Imprinted Polymer for Cyclobarbital and Its Application to the Assay of Phenobarbital in Human Serum.
Chromatography, 36, (2), 39-44, (2015)
   

Miura C et al., Molecularly imprinted polymer for chlorogenic acid by modified precipitation polymerization and its application to extraction of chlorogenic acid from Eucommia ulmodies leaves.
Journal of Pharmaceutical and Biomedical Analysis, 114, 139-144, (2015)
   

Miura C et al., Molecularly imprinted polymer for caffeic acid by precipitation polymerization and its application to extraction of caffeic acid and chlorogenic acid from Eucommia ulmodies leaves.
Journal of Pharmaceutical and Biomedical Analysis, 127, 32-38, (2016)
   

Nakamura Y et al., Preparation of molecularly imprinted polymers for strychnine by precipitation polymerization and multistep swelling and polymerization and their application for the selective extraction of strychnine from nux-vomica extract powder.
Journal of Separation Science, 39, (8), 1542-1550, (2016)
   

Nakamura Y et al., Molecularly imprinted polymer for glutathione by modified precipitation polymerization and its application to determination of glutathione in supplements.
Journal of Pharmaceutical and Biomedical Analysis, 144, 230-235, (2017)
   

Nakamura Y et al., Preparation of molecularly imprinted polymers for warfarin and coumachlor by multi-step swelling and polymerization method and their imprinting effects.
Journal of Chromatography A, 1516, 71-78, (2017)
   

Yasuyama T et al., A Study of the Strength of a Template Molecule-A Functional Monomer Interaction That Affects the Performance of Molecularly Imprinted Polymers and Its Application to Chiral Amplification.
Chemical and Pharmaceutical Bulletin, 65, (4), 396-402, (2017)
   

Matsunaga T

Matsunaga T et al., Crystallized Protein-imprinted Polymer Chips.
Chemistry Letters, 35, (9), 1030-1031, (2006)
   

Matsunaga T et al., Surface plasmon resonance sensor for lysozyme based on molecularly imprinted thin films.
Analytica Chimica Acta, 591, (1), 63-67, (2007)
   

Matsunaga T et al., Optimization of Functional Monomer Content in Protein-Imprinted Polymers.
Analytical Letters, 40, (14), 2633-2640, (2007)
   

Matsuoka S

Matsuoka S et al., Recent trends in solid phase spectrometry: 2003-2009. A Review.
Analytica Chimica Acta, 664, (1), 1-18, (2010)
   

Matsushita T

Nishikawa T et al., Nano imprinting of a protein assembly on metal surface.
Biophysical Journal, 86, (1), 161A-161A, (2004)
   

Matsutani K

Fujii Y et al., Template synthesis of polymer schiff-base cobalt(III) Complex and formation of specific cavity for chiral amino-acid.
Chemistry Letters, 13, (9), 1487-1490, (1984)
   

Fujii Y et al., Formation of a specific coordination cavity for a chiral amino-acid by template synthesis of a polymer Schiff base cobalt(III) Complex.
Journal of the Chemical Society-Chemical Communications, (7), 415-417, (1985)
   

Matsuura R

Kamon Y et al., Precisely controlled molecular imprinting of glutathione-s-transferase by orientated template immobilization using specific interaction with an anchored ligand on a gold substrate.
Polymer Chemistry, 5, (16), 4764-4771, (2014)
   

Matsuura T

Khulbe KC et al., The art of surface modification of synthetic polymeric membranes.
Journal of Applied Polymer Science, 115, (2), 855-895, (2010)
   

Matsuyama T

Ikawa T et al., Molecular-shape imprinting and immobilization of biomolecules on a polymer containing azo dye.
Langmuir, 22, (6), 2747-2753, (2006)
   

Matsuzaki S

Lee SW et al., Label-Free Creatinine Optical Sensing Using Molecularly Imprinted Titanium Dioxide-Polycarboxylic Acid Hybrid Thin Films: A Preliminary Study for Urine Sample Analysis.
Chemosensors, 9, (7), ArticleNo185-(2021)
   

Matta LL

Chambers JP et al., Biosensor Recognition Elements.
Current Issues in Molecular Biology, 10, (1-2), 1-12, (2008)
   

Mattebjerg MA

Zhou TC et al., Molecularly imprinted polymer beads for nicotine recognition prepared by RAFT precipitation polymerization: a step forward towards multi-functionalities.
RSC Advances, 4, (57), 30292-30299, (2014)
   

Mattiasson B

Le Noir M et al., Removal of trace contaminants using molecularly imprinted polymers.
Water Science And Technology, 53, (11), 205-212, (2006)
   

Le Noir M et al., Selective removal of 17[beta]-estradiol at trace concentration using a molecularly imprinted polymer.
Water Research, 41, (12), 2825-2831, (2007)
   

Le Noir M et al., Macroporous molecularly imprinted polymer/cryogel composite systems for the removal of endocrine disrupting trace contaminants.
Journal of Chromatography A, 1154, (1-2), 158-164, (2007)
   

Guerreiro A et al., Preliminary evaluation of new polymer matrix for solid-phase extraction of nonylphenol from water samples.
Analytica Chimica Acta, 612, (1), 99-104, (2008)
   

Guieysse B et al., Removal of endocrine disrupting contaminants using molecularly imprinted polymers.
Abstracts of Papers of the American Chemical Society, 235, (ENVR), 19-(2008)
   

Le Noir M et al., Removal of endocrine-disrupting compounds from water using macroporous molecularly imprinted selective media.
Abstracts of Papers of the American Chemical Society, 235, (ENVR), 21-(2008)
   

Plieva FM et al., Macroporous Gel Particles As Novel Sorbent Materials: Rational Design.
Industrial & Engineering Chemistry Research, 47, (12), 4131-4141, (2008)
   

Guieysse B et al., Book chapter, Removal of Endocrine Disrupting Compounds Using Molecularly Imprinted Polymers: A Review, 
In: New Membranes and Advanced Materials for Wastewater Treatment, Mueller A, Guieysse B, Sarkar A (Eds.) American Chemical Society: Washington DC, Ch. 2, 7-23, (2009)
   

Kueseng P et al., Molecularly imprinted polymer for analysis of trace atrazine herbicide in water.
Journal of Environmental Science and Health Part B-Pesticides Food Contaminants and Agricultural Wastes, 44, (8), 772-780, (2009)
   

Le Noir M et al., Removal of endocrine-disrupting compounds from water using macroporous molecularly imprinted cryogels in a moving-bed reactor.
Journal of Separation Science, 32, (9), 1471-1479, (2009)
   

Le Noir N et al., Book chapter, Removal of Endocrine Disrupting Contaminants from Water Using Macroporous Molecularly Imprinted Selective Media, 
In: New Membranes and Advanced Materials for Wastewater Treatment, Mueller A, Guieysse B, Sarkar A (Eds.) American Chemical Society: Washington DC, 25-51, (2009)
   

Le NM et al., Book chapter, Removal of Endocrine Disrupting Contaminants from Water Using Macroporous Molecularly Imprinted Selective Media, 
In: New Membranes and Advanced Materials for Wastewater Treatment, Mueller A, Guieysse B, Sarkar A (Eds.) American Chemical Society: Washington DC, Ch. 3, 25-51, (2009)
   

Hajizadeh S et al., Evaluation of selective composite cryogel for bromate removal from drinking water.
Journal of Separation Science, 33, (12), 1752-1759, (2010)
   

Elnwishy N et al., Monitoring of 17 [beta]-Estradiol Residues in the Suez Canal Region.
Egyptian Journal of Aquatic Biology and Fisheries, 16, (2), 73-81, (2012)
   

Önnby L et al., Polymer composite adsorbents using particles of molecularly imprinted polymers or aluminium oxide nanoparticles for treatment of arsenic contaminated waters.
Water Research, 46, (13), 4111-4120, (2012)
   

Hajizadeh S et al., Cryogelation of molecularly imprinted nanoparticles: A macroporous structure as affinity chromatography column for removal of [beta]-blockers from complex samples.
Journal of Chromatography A, 1274, 6-12, (2013)
   

Ertürk G et al., Microcontact-BSA imprinted capacitive biosensor for real-time, sensitive and selective detection of BSA.
Biotechnology Reports, 3, 65-72, (2014)
   

Ertürk G et al., Cryogels-versatile tools in bioseparation.
Journal of Chromatography A, 1357, 24-35, (2014)
   

Mattiasson B, Book chapter, Cryogels for Biotechnological Applications, 
In: Polymeric Cryogels, Okay O (Ed.) Springer International Publishing: 245-281, (2014)
   

Ertürk G et al., Real-time prostate-specific antigen detection with prostate-specific antigen imprinted capacitive biosensors.
Analytica Chimica Acta, 891, 120-129, (2015)
   

Lenain P et al., Affinity sensor based on immobilized molecular imprinted synthetic recognition Elements.
Biosensors and Bioelectronics, 69, 34-39, (2015)
   

Mattiasson B, Book chapter, MIPs as Tools in Environmental Biotechnology, 
In: Molecularly Imprinted Polymers in Biotechnology, Mattiasson B, Ye L (Eds.) Springer: Berlin, Heidelberg, Ch. 8, 183-205, (2015)
   

Afifi R et al., SPE and HPLC monitoring of 17-[beta]-estradiol in Egyptian aquatic ecosysetms.
Journal of Liquid Chromatography & Related Technologies, 39, (8), 428-434, (2016)
   

Asliyuce S et al., Synthesis and use of protein G imprinted cryogel as affinity matrix to purify protein G from cell lyaste.
Journal of Chromatography B, 1021, 204-212, (2016)
   

Ertürk G et al., From imprinting to microcontact imprinting-A new tool to increase selectivity in analytical devices.
Journal of Chromatography B, 1021, 30-44, (2016)
   

Ertürk G et al., Microcontact imprinting based surface plasmon resonance (SPR) biosensor for real-time and ultrasensitive detection of prostate specific antigen (PSA) from clinical samples.
Sensors and Actuators B: Chemical, 224, 823-832, (2016)
   

Ertürk G et al., A sensitive and real-time assay of trypsin by using molecular imprinting-based capacitive biosensor.
Biosensors and Bioelectronics, 86, 557-565, (2016)
   

Gutierrez RAV et al., Bioimprinting as a tool for the detection of aflatoxin B1 using a capacitive biosensor.
Biotechnology Reports, 11, 12-17, (2016)
   

Mattiasson B et al., Capacitive biosensors for ultra-sensitive assays.
TrAC Trends in Analytical Chemistry, 79, 233-238, (2016)
   

Ertürk G et al., Capacitive Biosensors and Molecularly Imprinted Electrodes.
Sensors, 17, (2), ArticleNo390-(2017)
   

Ertürk G et al., Molecular Imprinting Techniques Used for the Preparation of Biosensors.
Sensors, 17, (2), ArticleNo288-(2017)
   

Idil N et al., Whole cell based microcontact imprinted capacitive biosensor for the detection of Escherichia coli.
Biosensors and Bioelectronics, 87, 807-815, (2017)
   

Idil N et al., Imprinting of Microorganisms for Biosensor Applications.
Sensors, 17, (4), ArticleNo708-(2017)
   

Mattiasson B et al., Why Using Molecularly Imprinted Polymers in Connection to Biosensors?
Sensors, 17, (2), ArticleNo246-(2017)
   

Perçin I et al., Microcontact Imprinted Plasmonic Nanosensors: Powerful Tools in the Detection of Salmonella paratyphi.
Sensors, 17, (6), ArticleNo1375-(2017)
   

Canfarotta F et al., A novel capacitive sensor based on molecularly imprinted nanoparticles as recognition elements.
Biosensors and Bioelectronics, 120, 108-114, (2018)
   

Ertürk G et al., Highly sensitive detection and quantification of the secreted bacterial benevolence factor RoxP using a capacitive biosensor: A possible early detection system for oxidative skin diseases.
PLoS ONE, 13, (3), ArticleNoe0193754-(2018)
   

Asliyüce S et al., Combined protein A imprinting and cryogelation for production of spherical affinity material.
Biomedical Chromatography, 33, (10), Article_e4605-(2019)
   

Ertürk G et al., Bisphosphonate ligand mediated ultrasensitive capacitive protein sensor: complementary match of supramolecular and dynamic chemistry.
New Journal of Chemistry, 43, (2), 847-852, (2019)
   

Mohamed Idris Z et al., Amino-functionalised silica-grafted molecularly imprinted polymers for chloramphenicol adsorption.
Journal of Environmental Chemical Engineering, 8, (5), Article103981-(2020)
   

Mattiello F

Cennamo N et al., SPR Chemosensors Based on D-Shaped POFs and MIPs: Investigation on Optimal Thickness of the Buffer Layer.
Proceedings, 1, (8), ArticleNo816-(2017)
   

Cennamo N et al., A Simple and Low-Cost Optical Fiber Intensity-Based Configuration for Perfluorinated Compounds in Water Solution.
Sensors, 18, (9), ArticleNo3009-(2018)
   

Mattsson L

Mattsson L et al., Competitive fluorescent pseudo-immunoassay exploiting molecularly imprinted polymers for the detection of biogenic amines in fish matrix.
Talanta, 181, 190-196, (2018)
   

Matuschewski H

Piletsky SA et al., Surface functionalization of porous polypropylene membranes with molecularly imprinted polymers by photograft copolymerization in water.
Macromolecules, 33, (8), 3092-3098, (2000)
   

Matuschewski H et al., Proceeding, Surface engineering: Molecularly imprinted affinity membranes by photograft polymerization, 
Vo-Dinh T, Buettgenbach S (Eds.), 65-74, (2001)
   

Sergeyeva TA et al., Molecularly imprinted polymer membranes for substance-selective solid-phase extraction from water by surface photo-grafting polymerization.
Journal of Chromatography A, 907, (1-2), 89-99, (2001)
   

Sergeyeva TA et al., Development of molecularly imprinted polymer membranes with specificity to triazine herbicides, prepared by the "surface photografting" technique.
Biopolymers and Cell, 20, (4), 307-315, (2004)
   

Matusewicz J

Waksmundzki A et al., Struktura zeli krzemionowych specyficnie adsorbujach prydine, chinoline i akrydyne, cz. I.
Przemysl Chemiczny, 40, (7), 387-390, (1961)
   

Waksmundzki A et al., Stucture and adsorption properties of specific adsorbents.
Folia Soc. Sci. Lublin, 2, 149-154, (1962)
   

Matyska MT

Pesek JJ et al., A versatile method for biological and pharmaceutical analysis: Open tubular capillary electrochromatography.
American Laboratory, (May), 22-26, (2002)
   

Matyushov VF

Sergeyeva TA et al., Catalytic molecularly imprinted polymer membranes: Development of the biomimetic sensor for phenols detection.
Analytica Chimica Acta, 659, (1-2), 274-279, (2010)
   

Maull B

Ritz S et al., Proceeding, Imprinted Resin - The 21st Century Adsorbent, 
Davis BR, Moats MS, Wang SJ, Gregurek D, Kapusta J, Battle TP, Schlesinger ME, Alvear Flores GR, Jak E, Goodall G, Free ML, Asselin E, Chagnes A, Dreisinger D, Jeffrey M, Lee J, Miller G, Petersen J, Ciminelli VST, Xu Q, Molnar R, Adams J, Liu WY, Verbaan N, Goode J, London IM, Azimi G, Forstner A, Kappes R, Bhambhani T (Eds.), 1943-1960, (2018)
   

Maulvi FA

Maulvi FA et al., A review on therapeutic contact lenses for ocular drug delivery.
Drug Delivery, 23, (8), 3017-3026, (2016)
   

Maurel F

Maouche N et al., A surface acoustic wave sensor functionalized with a polypyrrole molecularly imprinted polymer for selective dopamine detection.
Journal of Molecular Recognition, 28, (11), 667-678, (2015)
   

Maurice C

Schöllhorn B et al., Competitive assay of 2, 4-dichlorophenoxyacetic acid using a polymer imprinted with an electrochemically active tracer closely related to the analyte.
Analyst, 125, (4), 665-667, (2000)
   

Maurino V

Giovannoli C et al., Comparison of binding behavior for molecularly imprinted polymers prepared by hierarchical imprinting or Pickering emulsion polymerization.
Journal of Separation Science, 38, (20), 3661-3668, (2015)
   

Maury D

Maury D et al., Synthesis and evaluation of new lipomonosaccharide-imprinted polymers as MISPE supports.
Talanta, 73, (2), 340-345, (2007)
   

Maury P

Maury P et al., Directed assembly of nanoparticles onto polymer-imprinted or chemically patterned templates fabricated by nanoimprint lithography.
Advanced Materials, 17, (22), 2718-2723, (2005)
   

Maurya PK

Rao RN et al., Molecularly imprinted polymer for selective extraction of 3-methylflavone-8-carboxylic acid from human urine followed by its determination using zwitterionic hydrophilic interaction liquid chromatography.
Journal of Separation Science, 34, (22), 3265-3271, (2011)
   

Rao RN et al., Development of a molecularly imprinted polymer for selective extraction followed by liquid chromatographic determination of sitagliptin in rat plasma and urine.
Talanta, 85, (2), 950-957, (2011)
   

Mausia T

Mausia T et al., Molecularly Imprinted Polymers as Specific Adsorbents for Zearalenone Produced by Precipitation Polymerization and Applied to Mycotoxin Production.
Analytical Letters, 44, (16), 2633-2643, (2011)
   

Mauzac M

Marty JD et al., New molecular imprinting materials: Liquid crystalline networks.
Macromolecules, 32, (25), 8674-8677, (1999)
   

Marty JD et al., Liquid crystal polysiloxane networks as materials for molecular imprinting technology: memory of the mesomorphic organization.
Liquid Crystals, 29, (4), 529-536, (2002)
   

Marty JD et al., Liquid crystalline networks: Potential uses in molecular imprinting technique.
Molecular Crystals And Liquid Crystals, 411, 561-568, (2004)
   

Marty JD et al., Chiral molecular imprinting in liquid-crystalline network.
European Physical Journal E, 17, (4), 515-520, (2005)
   

Marty JD et al., High capacity molecular imprinted mesomorphous networks usable as antibody mimics.
Molecular Crystals And Liquid Crystals, 437, 1307-1314, (2005)
   

Marty JD et al., Book chapter, Molecular imprinting: State of the art and perspectives, 
In: Microlithography/Molecular Imprinting, Ito H, Marty JD (Eds.) Springer-Verlag GmbH: Ch. 1, 1-35, (2005)
   

Binet C et al., First approach to the use of liquid crystal elastomers for chemical sensors.
Talanta, 69, (3), 757-762, (2006)
   

Palaprat G et al., Study of Hydrogen Bonding in Liquid Crystalline Solvent by Fourier Transform Infrared Spectroscopy.
Journal of Physical Chemistry A, 110, (47), 12887-12890, (2006)
   

Palaprat G et al., Introduction of unusual properties into polymers by the use of liquid-crystalline moieties.
Polymer International, 55, (10), 1191-1198, (2006)
   

Binet C et al., Benefit of liquid crystal moieties in the MIP technique.
Analytica Chimica Acta, 591, (1), 1-6, (2007)
   

Palaprat G et al., Enantioselective Absorption of Chirally Doped Liquid Crystalline Networks Studied by the Use of an Electronic Microbalance.
Journal of Physical Chemistry B, 111, (31), 9239-9243, (2007)
   

Gué AM et al., Characterization of recognition sites for diethyl 4-nitrobenzylphosphonate, an organophosphate pesticide analogue.
Analytica Chimica Acta, 614, (1), 63-70, (2008)
   

Weyland M et al., Artificial enzymes based on imprinted liquid-crystalline materials.
Liquid Crystals, 35, (2), 219-231, (2008)
   

Mingotaud AF et al., Book chapter, Next generation molecular imprinted polymers: Examples of liquid crystalline materials and hydrogels for protein recognition, 
In: Molecular Recognition: Biotechnology, Chemical Engineering and Materials Applications, McEvoy JA (Ed.) Nova Science Publishers, Inc.: New York, Ch. 2, 45-77, (2011)
   

Mavhunga E

Khulu S et al., Multivariate optimization of a two-way technique for extraction of pharmaceuticals in surface water using a combination of membrane assisted solvent extraction and a molecularly imprinted polymer.
Chemosphere, 286, Article131973-(2022)
   

Mavliutova L

Mahajan R et al., Highly Efficient Synthesis and Assay of Protein-Imprinted Nanogels by Using Magnetic Templates.
Angewandte Chemie International Edition, 58, (3), 727-730, (2019)
   

Mavliutova L et al., Discrimination between sialic acid linkage modes using sialyllactose-imprinted polymers.
RSC Advances, 11, (36), 22409-22418, (2021)
   

Max JP

Lopez C et al., Synthesis and study of a molecularly imprinted polymer for specific solid-phase extraction of vinflunine and its metabolite from biological fluids.
Journal of Separation Science, 34, (15), 1902-1909, (2011)
   

Lopez C et al., Synthesis and study of a molecularly imprinted polymer for the specific extraction of indole alkaloids from Catharanthus roseus extracts.
Analytica Chimica Acta, 683, (2), 198-205, (2011)
   

Maximilien J

Marchyk N et al., One-pot synthesis of iniferter-bound polystyrene core nanoparticles for the controlled grafting of multilayer shells.
Nanoscale, 6, (5), 2872-2878, (2014)
   

Kunath S et al., Cell and Tissue Imaging with Molecularly Imprinted Polymers as Plastic Antibody Mimics.
Advanced Healthcare Materials, 4, (9), 1322-1326, (2015)
   

Maximilien J et al., Book chapter, Nanoparticles in Biomedical Applications, 
In: Measuring Biological Impacts of Nanomaterials, Wegener J (Ed.) Springer International Publishing: Cham, 177-210, (2016)
   

Maximov AL

Karakhanov EA et al., Molecular imprinting technique for the design of cyclodextrin based materials and their application in catalysis.
Current Organic Chemistry, 14, (13), 1284-1295, (2010)
   

Mayahi J

Mayahi J et al., Comparison study on separation of morin: ultrasound assisted molecularly imprinted polymeric nanoparticles-solid phase extraction versus solidification of floating organic-drop assisted dispersive liquid-liquid microextraction.
New Journal of Chemistry, 41, (23), 14236-14245, (2017)
   

Mayer PM

Wu SG et al., Molecularly imprinted solid phase extraction-pulsed elution-mass spectrometry for determination of cephalexin and a-aminocephalosporin antibiotics in human serum.
Journal of Pharmaceutical and Biomedical Analysis, 36, (3), 483-490, (2004)
   

Mayer T

Borsdorf H et al., Recent Developments in Ion Mobility Spectrometry.
Applied Spectroscopy Reviews, 46, (6), 472-521, (2011)
   

Zarejousheghani M et al., Negative electrospray ionization ion mobility spectrometry combined with paper-based molecular imprinted polymer disks: A novel approach for rapid target screening of trace organic compounds in water samples.
Talanta, 190, 47-54, (2018)
   

Mayerberger E

Sarkhosh T et al., Development of cell-imprinted polymer surfaces for Cryptosporidium capture and detection.
Water Research, 205, Article117675-(2021)
   

Mayes AG

Mayes AG et al., Sugar binding polymers showing high anomeric and epimeric discrimination obtained by noncovalent molecular imprinting.
Analytical Biochemistry, 222, (2), 483-488, (1994)
   

Mayes AG et al., Molecularly imprinted polymer beads: Suspension polymerization using a liquid perfluorocarbon as the dispersing phase.
Analytical Chemistry, 68, (21), 3769-3774, (1996)
   

Mayes AG et al., Molecularly imprinted polymers: useful materials for analytical chemistry?
TrAC Trends in Analytical Chemistry, 16, (6), 321-332, (1997)
   

Haupt K et al., Herbicide assay using an imprinted polymer based system analogous to competitive fluoroimmunoassays.
Analytical Chemistry, 70, (18), 3936-3939, (1998)
   

Mayes AG et al., Book chapter, Optimization of molecularly imprinted polymers for radio-ligand binding assays, 
In: Drug-development assay approaches including molecular imprinting and biomarkers, Reid E, Hill HM, Wilson ID (Eds.) Royal Society of Chemistry: Ch. A-4, 28-36, (1998)
   

Mayes AG, Book chapter, Polymerisation techniques for the formation of imprinted beads, 
In: Molecularly Imprinted Polymers: Man-Made Mimics of Antibodies and their Applications in Analytical Chemistry, Sellergren B (Ed.) Elsevier: Amsterdam, Ch. 12, 305-324, (2001)
   

Pérez-Moral N et al., Novel MIP formats.
Bioseparation, 10, (6), 287-299, (2002)
   

Fairhurst RE et al., A direct comparison of the performance of ground, beaded and silica-grafted MIPs in HPLC and turbulent flow chromatography applications.
Biosensors and Bioelectronics, 20, (6), 1098-1105, (2004)
   

Pérez-Moral N et al., Noncovalent imprinting in the shell of core-shell nanoparticles.
Langmuir, 20, (9), 3775-3779, (2004)
   

Pérez-Moral N et al., Comparative study of imprinted polymer particles prepared by different polymerisation methods.
Analytica Chimica Acta, 504, (1), 15-21, (2004)
   

Mayes AG et al., Synthetic strategies for the generation of molecularly imprinted organic polymers.
Advanced Drug Delivery Reviews, 57, (12), 1742-1778, (2005)
   

Mayes AG, Book chapter, A brief history of the "new era" of molecular imprinting, 
In: Molecularly Imprinted Materials: Science and Technology, Yan M, Ramström O (Eds.) Marcel Dekker: New York, Ch. 2, 13-23, (2005)
   

Pérez-Moral N et al., Book chapter, MIP formats for analytical applications, 
In: Molecular imprinting of polymers, Piletsky S, Turner A (Eds.) Landes Bioscience: Georgetown, Texas, Ch. 1, 1-11, (2006)
   

Pérez-Moral N et al., Direct rapid synthesis of MIP beads in SPE cartridges.
Biosensors and Bioelectronics, 21, (9), 1798-1803, (2006)
   

Zourob M et al., A micro-reactor for preparing uniform molecularly imprinted polymer beads.
Lab on a Chip, 6, (2), 296-301, (2006)
   

Pérez-Moral N et al., Molecularly Imprinted Multi-Layer Core-Shell Nanoparticles - A Surface Grafting Approach.
Macromolecular Rapid Communications, 28, (22), 2170-2175, (2007)
   

Fuchs Y et al., Ultrathin Selective Molecularly Imprinted Polymer Microdots Obtained by Evanescent Wave Photopolymerization.
Chemistry of Materials, 23, (16), 3645-3651, (2011)
   

Fuchs Y et al., Holographic Molecularly Imprinted Polymers for Label-Free Chemical Sensing.
Advanced Materials, 25, (4), 566-570, (2013)
   

Fuchs Y et al., Molecularly Imprinted Silver-Halide Reflection Holograms for Label-Free Opto-Chemical Sensing.
Advanced Functional Materials, 24, (5), 688-694, (2014)
   

Panagiotopoulou M et al., Molecularly Imprinted Polymer Coated Quantum Dots for Multiplexed Cell Targeting and Imaging.
Angewandte Chemie International Edition, 55, (29), 8244-8248, (2016)
   

Mayoral Á

Casado C et al., l- and d-Proline Adsorption by Chiral Ordered Mesoporous Silica.
Langmuir, 28, (16), 6638-6644, (2012)
   

Mayoral ÁI

Lacasta S et al., Chiral Imprinting with Amino Acids of Ordered Mesoporous Silica Exhibiting Enantioselectivity after Calcination.
Chemistry of Materials, 23, (5), 1280-1287, (2011)
   

Mayoral-Murillo JA

Recillas Mota JJ et al., Synthesis and characterization of molecularly imprinted polymers with metallic zinc center for enrofloxacin recognition.
Reactive and Functional Polymers, 73, (8), 1078-1085, (2013)
   

Mayorga-Martinez CC

Zamora-Gálvez A et al., Nanomaterials connected to antibodies and molecularly imprinted polymers as bio/receptors for bio/sensor applications.
Applied Materials Today, 9, 387-401, (2017)
   

Mayorga-Matinez CC

Zamora-Gálvez A et al., Magnetic nanoparticle-molecular imprinted polymer: A new impedimetric sensor for tributyltin detection.
Electrochemistry Communications, 82, 6-11, (2017)
   

Mazeran PE

Gonzato C et al., On the effect of using RAFT and FRP for the bulk synthesis of acrylic and methacrylic molecularly imprinted polymers.
Polymer Chemistry, 5, (4), 1313-1322, (2014)
   

Mazerie I

Bakas I et al., Picomolar Detection of Melamine Using Molecularly Imprinted Polymer-Based Electrochemical Sensors Prepared by UV-Graft Photopolymerization.
Electroanalysis, 27, (2), 429-439, (2015)
   

Mazinani S

Afshari R et al., Proceeding, Carbon Nanotubes-Chitosan-Molecularly Imprinted Polymer Nano-Carriers Synthesis for Nanomedicine Application, 
03NCNN08, (2013)
   

Sheybani S et al., Mesoporous molecularly imprinted polymer nanoparticles as a sustained release system of azithromycin.
RSC Advances, 5, (120), 98880-98891, (2015)
   

Mohebali A et al., Synthesis and characterization of poly(methacrylic acid)-based molecularly imprinted polymer nanoparticles for controlled release of trinitroglycerin.
Polymers for Advanced Technologies, 27, (9), 1164-1171, (2016)
   

Mazloum-Ardakani M

Mazloum-Ardakani M et al., Preparation of Cu (II) imprinted polymer electrode and its application for potentiometric and voltammetric determination of Cu (II).
Journal of the Iranian Chemical Society, 11, (1), 257-262, (2014)
   

Mazouz Z

Mazouz Z et al., Highly Selective Polypyrrole MIP-Based Gravimetric and Electrochemical Sensors for Picomolar Detection of Glyphosate.
Sensors, 17, (11), ArticleNo2586-(2017)
   

Mazouz Z et al., Design of Novel Electrochemical Sensors for the Selective Detection of Glyphosate.
Proceedings, 1, (4), ArticleNo483-(2017)
   

Achour B et al., Proceeding, Ultrasensitive Ion Imprinted Polypyrole Polymer Based Piezoelectric Sensors for Selective Detection of Lead Ions, 
1-4, (2018)
   

Mokni1 M et al., Proceeding, Prime importance of the supporting electrolyte in the realization of molecularly imprinted polymers, 
(2019)
   

Mazumder A

Roy KS et al., A simplistic designing of molecularly imprinted polymers for derivative of nerve agents marker using 31P{1H}NMR.
European Polymer Journal, 98, 105-115, (2018)
   

Mazumder S

Melo JS et al., Spray drying as a novel technique for obtaining microbial imprinted microspheres and its application in filtration.
Soft Matter, 9, (3), 805-810, (2013)
   

Mazzei R

Donato L et al., Book chapter, Molecular recognition-driven membrane processes, 
In: Smart Membranes and Sensors: Synthesis, Characterization, and Applications, Gugliuzza A (Ed.) John Wiley & Sons: Ch. 10, 269-300, (2014)
   

Mazzolai B

Gagliardi M et al., Molecularly imprinted polymeric micro- and nano-particles for the targeted delivery of active molecules.
Future Medicinal Chemistry, 7, (2), 123-138, (2015)
   

Mazzotta E

Mazzotta E et al., Development of a sensor prepared by entrapment of MIP particles in electrosynthesised polymer films for electrochemical detection of ephedrine.
Biosensors and Bioelectronics, 23, (7), 1152-1156, (2008)
   

Mazzotta E et al., Preliminary Study on Electrosynthesis of a Co-Porphyrin Based Molecularly Imprinted Polymer for the Selective Detection of the Herbicide 2, 4-Dichlorophenoxy Carboxylic Acid.
Sensor Letters, 6, (4), 618-622, (2008)
   

Malitesta C et al., X-Ray Photoelectron Spectroscopy characterization of electrosynthesized poly(3-thiophene acetic acid) and its application in Molecularly Imprinted Polymers for atrazine.
Thin Solid Films, 518, (14), 3705-3709, (2010)
   

Mazzotta E et al., Electrochemical detection of the toxic organohalide 2, 4-DB using a Co-porphyrin based electrosynthesized molecularly imprinted polymer.
Sensors and Actuators B: Chemical, 148, (1), 186-194, (2010)
   

Mazzotta E et al., Book chapter, Electrochemically Synthesized Molecularly Imprinted Polymers for Sensing Applications, 
In: Sensors and Microsystems, Neri G, Donato N, D'Amico A, Di Natale C (Eds.) Springer Netherlands: Ch. 66, 409-413, (2011)
   

Malitesta C et al., MIP sensors - the electrochemical approach.
Analytical and Bioanalytical Chemistry, 402, (5), 1827-1846, (2012)
   

Mazzotta E et al., Electrosynthesis of molecularly imprinted polypyrrole for the antibiotic levofloxacin.
Thin Solid Films, 520, (6), 1938-1943, (2012)
   

Mazzotta E et al., Proceeding, Microstructuring conducting polymers and molecularly imprinted polymers by light-activated electropolymerization on micromachined silicon. Applications in electrochemical sensing, 
1-4, (2013)
   

Díaz-Álvarez M et al., Evaluation of electrochemically synthesized sulfadimethoxine-imprinted polymer for solid-phase microextraction of sulfonamides.
Journal of Molecular Recognition, 27, (6), 415-420, (2014)
   

Introna B et al., Proceeding, Electrochemical sensor for Serotonin based on a composite made of core-shell molecularly imprinted polymer nanoparticles and polyethilenedioxythiophene, 
1-4, (2015)
   

Turco A et al., Electrochemical sensor for sulfadimethoxine based on molecularly imprinted polypyrrole: Study of imprinting parameters.
Biosensors and Bioelectronics, 63, 240-247, (2015)
   

Turco A et al., Book chapter, Molecularly Imprinted Overoxidized Polypyrrole as Recognition Element in the Electrochemical Detection of Sulfadimethoxine, 
In: Sensors: Proceedings of the Second National Conference on Sensors, Rome 19-21 February, 2014, Compagnone D, Baldini F, Di Natale C, Betta G, Siciliano P (Eds.) Springer: Heidelberg, New York, Dordrecht, London, Ch. 27, 153-157, (2015)
   

Mazzotta E et al., Solid-phase synthesis of electroactive nanoparticles of molecularly imprinted polymers. A novel platform for indirect electrochemical sensing applications.
Sensors and Actuators B: Chemical, 229, 174-180, (2016)
   

Malitesta C et al., From Electrochemical Biosensors to Biomimetic Sensors Based on Molecularly Imprinted Polymers in Environmental Determination of Heavy Metals.
Frontiers in Chemistry, 5, ArticleNo47-(2017)
   

Mazzotta E et al., Book chapter, Electrosynthesized Molecularly Imprinted Polymers for Chemosensing: Fundamentals and Applications, 
In: Molecularly Imprinted Polymers for Analytical Chemistry Applications, Kutner W, Sharma PS (Eds.) Royal Society of Chemistry: Ch. 13, 412-446, (2018)
   

Turco A et al., Preparation and characterization of molecularly imprinted mussel inspired film as antifouling and selective layer for electrochemical detection of sulfamethoxazole.
Sensors and Actuators B: Chemical, 255, (Part 3), 3374-3383, (2018)
   

Rapini R et al., NanoMIP-based approach for the suppression of interference signals in electrochemical sensors.
Analyst, 144, (24), 7290-7295, (2019)
   

D’Aurelio R et al., A Comparison of EIS and QCM NanoMIP-Based Sensors for Morphine.
Nanomaterials, 11, (12), ArticleNo3360-(2021)
   

Mazzu YZ

Wang SX et al., Specific adsorption of tetracycline from milk by using biocompatible magnetic molecular imprinting material and evaluation by ECD.
Food Chemistry, 326, Article126969-(2020)
   

Mazzuia GR

Boscari CN et al., Molecularly imprinted probe for solid-phase extraction of hippuric and 4-methylhippuric acids directly from human urine samples followed by MEKC analysis.
Electrophoresis, 38, (7), 1083-1090, (2017)
   

Maître A

Griffete N et al., Introduction of a planar defect in a molecularly imprinted photonic crystal sensor for the detection of bisphenol A.
Journal of Colloid and Interface Science, 364, (1), 18-23, (2011)
   

Griffete N et al., Inverse Opals of Molecularly Imprinted Hydrogels for the Detection of Bisphenol A and pH Sensing.
Langmuir, 28, (1), 1005-1012, (2012)
   

Gam-Derouich S et al., Proceeding, Imprinted polymers and photonic crystals for sensing of molecules and nanoparticles, 
1-4, (2016)
   

Gam-Derouich S et al., Imprinted Photonic Hydrogels for the Size- and Shell-Selective Recognition of Nanoparticles.
Angewandte Chemie International Edition, 56, (33), 9710-9714, (2017)
   

Mañes J

Picó Y et al., Capillary electrophoresis for the determination of pesticide residues.
TrAC Trends in Analytical Chemistry, 22, (3), 133-151, (2003)
   

Mbhele ZE

Mbhele ZE et al., Synthesis of a molecularly imprinted polymer and its application in selective extraction of fenoprofen from wastewater.
Environmental Science and Pollution Research, 25, (36), 36724-36735, (2018)
   

Mbianda XY

Ahamed MEH et al., Selective extraction of gold(III) from metal chloride mixtures using ethylenediamine N-(2-(1-imidazolyl)ethyl) chitosan ion-imprinted polymer.
Hydrometallurgy, 140, 1-13, (2013)
   

Ahamed MEH et al., Ion imprinted polymers for the selective extraction of silver(I) ions in aqueous media: Kinetic modeling and isotherm studies.
Reactive and Functional Polymers, 73, (3), 474-483, (2013)
   

Ahamed MEH et al., Statistical Optimization, Kinetic and Isotherm Studies on Selective Adsorption of Silver and Gold Cyanocomplexes Using Aminoguanidyl-Chitosan Imprinted Polymers.
Journal of Advanced Chemical Engineering, 6, (2), ArticleNo149-(2016)
   

Velempini T et al., Epichlorohydrin crosslinked carboxymethyl cellulose-ethylenediamine imprinted polymer for the selective uptake of Cr(VI).
International Journal of Biological Macromolecules, 101, 837-844, (2017)
   

Velempini T et al., Application of a Polypyrrole/Carboxy Methyl Cellulose Ion Imprinted Polymer in the Electrochemical Detection of Mercury in Water.
Electroanalysis, 30, (11), 2612-2619, (2018)
   

Velempini T et al., Carboxymethyl cellulose thiol-imprinted polymers: Synthesis, characterization and selective Hg(II) adsorption.
Journal of Environmental Sciences, 79, 280-296, (2019)
   

Mbozi A

Munyati MO et al., Polyaniline nanoparticles for the selective recognition of aldrin: Synthesis, characterization, and adsorption properties.
Synthetic Metals, 233, 79-85, (2017)
   

Mbukwa EA

Mbukwa EA et al., Preparation of guanidinium terminus-molecularly imprinted polymers for selective recognition and solid-phase extraction (SPE) of [arginine]-microcystins.
Analytical and Bioanalytical Chemistry, 405, (12), 4253-4267, (2013)
   

McArthur SL

Seniutinas G et al., Versatile SERS sensing based on black silicon.
Optics Express, 23, (5), 6763-6772, (2015)
   

McBride MK

White CJ et al., Extended release of high molecular weight hydroxypropyl methylcellulose from molecularly imprinted, extended wear silicone hydrogel contact lenses.
Biomaterials, 32, (24), 5698-5705, (2011)
   

Tieppo A et al., Sustained in vivo release from imprinted therapeutic contact lenses.
Journal of Controlled Release, 157, (3), 391-397, (2012)
   

McCalley DV

Kirsch N et al., Towards the development of molecularly imprinted polymer based screen-printed sensors for metabolites of PAHs.
Analyst, 126, (11), 1936-1941, (2001)
   

McCarney JP

Palmer CF et al., Recent progress in the use of soluble ionic polymers as pseudostationary phases for electrokinetic chromatography.
Electrophoresis, 25, (23-24), 4086-4094, (2004)
   

Palmer CP et al., Developments in the use of soluble ionic polymers as pseudo-stationary phases for electrokinetic chromatography and stationary phases for electrochromatography.
Journal of Chromatography A, 1044, (1-2), 159-176, (2004)
   

McCartney L

Pickup J et al., In vivo glucose sensing for diabetes management: progress towards non-invasive monitoring.
British Medical Journal, 319, (7220), 1289-1U31, (1999)
   

McCasland AK

Zuo X et al., Toward the soil poultice and a new separations methodology: Rebinding of macrocyclic metal complexes to molecularly imprinted polymers specifically templated via noncovalent interactions.
Journal of Coordination Chemistry, 58, (1), 21-39, (2005)
   

McClelland GM

Carter KR et al., Surface modification of imprinted polymer surfaces.
Abstracts of Papers of the American Chemical Society, 225, (COLL), 286-286, (2003)
   

McClements J

McClements J et al., Immobilization of Molecularly Imprinted Polymer Nanoparticles onto Surfaces Using Different Strategies: Evaluating the Influence of the Functionalized Interface on the Performance of a Thermal Assay for the Detection of the Cardiac Biomarker Troponin I.
ACS Applied Materials & Interfaces, 13, (24), 27868-27879, (2021)
   

McCluskey A

Schwarz L et al., Synthesis and evaluation of a molecularly imprinted polymer selective to 2, 4, 6-trichlorophenol.
Australian Journal of Chemistry, 57, (8), 759-764, (2004)
   

Holdsworth CI et al., Formulation of cocaine-imprinted polymers utilizing molecular modelling and NMR analysis.
Australian Journal of Chemistry, 58, (5), 315-320, (2005)
   

Booker K et al., Efficient preparation and improved sensitivity of molecularly imprinted polymers using room temperature ionic liquids.
Chemical Communications, (16), 1730-1732, (2006)
   

Schwarz L et al., Synthesis and evaluation of a molecularly imprinted polymer selective to 2, 4, 6-trichloroanisole.
Australian Journal of Chemistry, 59, (2), 129-134, (2006)
   

Booker K et al., Molecularly Imprinted Polymers and Room Temperature Ionic Liquids: Impact of Template on Polymer Morphology.
Australian Journal of Chemistry, 60, (1), 51-56, (2007)
   

McCluskey A et al., Molecularly imprinted polymers (MIPs): sensing, an explosive new opportunity?
Organic & Biomolecular Chemistry, 5, (20), 3233-3244, (2007)
   

Turner NW et al., Effect of template on the formation of phase-inversed molecularly imprinted polymer thin films: an assessment.
Soft Matter, 5, (19), 3663-3671, (2009)
   

Zayas HA et al., Synthesis of biaryl-styrene monomers by microwave-assisted Suzuki coupling.
Tetrahedron Letters, 50, (43), 5894-5895, (2009)
   

Turner NW et al., Microwave induced MIP synthesis: comparative analysis of thermal and microwave induced polymerisation of caffeine imprinted polymers.
New Journal of Chemistry, 34, (4), 686-692, (2010)
   

Booker K et al., Book chapter, Ionic Liquids as Porogens in the Synthesis of Molecularly Imprinted Polymers, 
In: Applications of Ionic Liquids in Science and Technology, Handy S (Ed.) InTech: Ch. 10, 197-212, (2011)
   

Turner NW et al., N-2-Propenyl-(5-dimethylamino)-1-naphthalene Sulfonamide, a Novel Fluorescent Monomer for the Molecularly Imprinted Polymer-Based Detection of 2, 4-Dinitrotoluene in the Gas Phase.
Australian Journal of Chemistry, 65, (10), 1405-1412, (2012)
   

Brisbane C et al., Molecularly imprinted films of acrylonitrile/methyl methacrylate/acrylic acid terpolymers: influence of methyl methacrylate in the binding performance of l-ephedrine imprinted films.
Organic & Biomolecular Chemistry, 11, (17), 2872-2884, (2013)
   

Cleland D et al., The use of effective fragment potentials in the design and synthesis of molecularly imprinted polymers for the group recognition of PCBs.
Organic & Biomolecular Chemistry, 11, (28), 4646-4656, (2013)
   

Cleland D et al., An extreme vertices mixture design approach to the optimisation of 1, 2, 3-trichlorobenzene specific molecularly imprinted polymers.
Organic & Biomolecular Chemistry, 11, (28), 4672-4679, (2013)
   

Booker K et al., Ionic liquids as porogens for molecularly imprinted polymers: propranolol, a model study.
Organic & Biomolecular Chemistry, 12, (37), 7201-7210, (2014)
   

Cleland D et al., Molecular dynamics approaches to the design and synthesis of PCB targeting molecularly imprinted polymers: interference to monomer-template interactions in imprinting of 1, 2, 3-trichlorobenzene.
Organic & Biomolecular Chemistry, 12, (5), 844-853, (2014)
   

Zayas H et al., Evaluation of 4-substituted styrenes as functional monomers for the synthesis of theophylline-specific molecularly imprinted polymers.
Organic & Biomolecular Chemistry, 12, (36), 6994-7003, (2014)
   

Zayas HA et al., Potentiometric determination of acid dissociation constants of novel biaryl monomers.
Analytical Methods, 7, (19), 8206-8211, (2015)
   

McCormack M

O’Mahony J et al., Design and implementation of an imprinted material for the extraction of the endocrine disruptor bisphenol A from milk.
Journal of Chromatography B, 931, 164-169, (2013)
   

McDonald M

Baleviciute I et al., Evaluation of theophylline imprinted polypyrrole film.
Synthetic Metals, 209, 206-211, (2015)
   

McElhiney J

McElhiney J et al., Detection of the cyanobacterial hepatotoxins microcystins.
Toxicology and Applied Pharmacology, 203, (3), 219-230, (2005)
   

McGeachie AB

Turner NW et al., Effect of template on the formation of phase-inversed molecularly imprinted polymer thin films: an assessment.
Soft Matter, 5, (19), 3663-3671, (2009)
   

McGill P

Canfarotta F et al., Biocompatibility and internalization of molecularly imprinted nanoparticles.
Nano Research, 9, (11), 3463-3477, (2016)
   

McGrane SD

Brown KE et al., Advances in explosives analysis-part I: animal, chemical, ion, and mechanical methods.
Analytical and Bioanalytical Chemistry, 408, (1), 35-47, (2016)
   

McGuffey JE

Xia Y et al., Analysis of the Tobacco-Specific Nitrosamine 4-(Methylnitrosamino)-1-(3-pyridyl)-1-butanol in Urine by Extraction on a Molecularly Imprinted Polymer Column and Liquid Chromatography/Atmospheric Pressure Ionization Tandem Mass Spectrometry.
Analytical Chemistry, 77, (23), 7639-7645, (2005)
   

McGuigan C

Allender CJ et al., Separation of individual antiviral nucleotide prodrugs from synthetic mixtures using cross-reactivity of a molecularly imprinted stationary phase.
Analytica Chimica Acta, 435, (1), 107-113, (2001)
   

McHale G

Percival CJ et al., Molecular-imprinted, polymer-coated quartz crystal microbalances for the detection of terpenes.
Analytical Chemistry, 73, (17), 4225-4228, (2001)
   

Percival CJ et al., Molecular imprinted polymer coated QCM for the detection of nandrolone.
Analyst, 127, (8), 1024-1026, (2002)
   

Stanley S et al., Enantioselective detection of L-serine.
Sensors and Actuators B: Chemical, 89, (1-2), 103-106, (2003)
   

Stanley S et al., Detection of polycyclic aromatic hydrocarbons using quartz crystal microbalances.
Analytical Chemistry, 75, (7), 1573-1577, (2003)
   

McIntyre JB

McIntyre JB, Book chapter, A general survey of patents in the field of molecularly imprinted polymers, 
In: Molecular imprinting of polymers, Piletsky S, Turner A (Eds.) Landes Bioscience: Georgetown, Texas, Ch. 15, 199-204, (2006)
   

McKitterick N

McKitterick N et al., Facilitating serum determination of neuron specific enolase at clinically relevant levels by coupling on-line molecularly imprinted solid-phase extraction to LC-MS/MS.
Analytica Chimica Acta, 1140, 210-218, (2020)
   

Halvorsen TG et al., Affinity capture in bottom-up protein analysis - Overview of current status of proteolytic peptide capture using antibodies and molecularly imprinted polymers.
Analytica Chimica Acta, 1182, Article338714-(2021)
   

McKitterick N et al., On-line duplex molecularly imprinted solid-phase extraction for analysis of low-abundant biomarkers in human serum by liquid chromatography-tandem mass spectrometry.
Journal of Chromatography A, 1655, Article462490-(2021)
   

McKnight D

Sims MR et al., The specific molecular identification of life experiment (SMILE).
Planetary and Space Science, 53, (8), 781-791, (2005)
   

McLean RK

Graham SP et al., Evaluation of Molecularly Imprinted Polymers as Synthetic Virus Neutralizing Antibody Mimics.
Frontiers in Bioengineering and Biotechnology, 7, Article115-(2019)
   

McLeod KR

Kudupoje MB et al., 300 Contractile response of bovine lateral saphenous vein to ergotamine tartrate exposed to molecularly imprinted polymers - Physiological significance of in vitro studies.
Journal of Animal Science, 95, (supplement4), 148-149, (2017)
   

Kudupoje MB et al., Contractile Response of Bovine Lateral Saphenous Vein to Ergotamine Tartrate Exposed to Different Concentrations of Molecularly Imprinted Polymer.
Toxins, 10, (2), ArticleNo58-(2018)
   

Kudupoje MB et al., Synthesis, Evaluation, and Characterization of an Ergotamine Imprinted Styrene-Based Polymer for Potential Use as an Ergot Alkaloid Selective Adsorbent.
ACS Omega, 6, (45), 30260-30280, (2021)
   

McLoughlin P

Olwill A et al., The use of molecularly imprinted sol-gels in pharmaceutical separations.
Biosensors and Bioelectronics, 20, (6), 1045-1050, (2004)
   

Cummins W et al., A comparative study of the potential of acrylic and sol-gel polymers for molecular imprinting.
Analytica Chimica Acta, 542, (1), 52-60, (2005)
   

Cummins W et al., Systematic cross-selectivity study of the factors influencing template receptor interactions in molecularly imprinted nitrogen heterocycles.
Biosensors and Bioelectronics, 22, (3), 372-380, (2006)
   

Cummins W et al., Thermal desorption characterisation of molecularly imprinted polymers. Part I: a novel study using direct-probe GC-MS analysis.
Analytical and Bioanalytical Chemistry, 391, (4), 1237-1244, (2008)
   

Holland N et al., Thermal desorption characterisation of molecularly imprinted polymers. Part II: Use of direct probe GC-MS analysis to study crosslinking effects.
Analytical and Bioanalytical Chemistry, 391, (6), 2371-2371, (2008)
   

Holland N et al., Thermal desorption characterisation of molecularly imprinted polymers. Part II: Use of direct probe GC-MS analysis to study crosslinking effects.
Analytical and Bioanalytical Chemistry, 391, (4), 1245-1253, (2008)
   

Osmani Q et al., The use of FTIR and NMR spectroscopies to study prepolymerisation interactions in nitrogen heterocycles.
Analytical and Bioanalytical Chemistry, 391, (4), 1229-1236, (2008)
   

Holland N et al., The influence of polymer morphology on the performance of molecularly imprinted polymers.
Polymer, 51, (7), 1578-1584, (2010)
   

Walsh R et al., Synthesis of imprinted beads by aqueous suspension polymerisation for chiral recognition of antihistamines.
Journal of Chromatography B, 879, (30), 3523-3530, (2011)
   

Manesiotis P et al., An enantio-selective chromatographic stationary phase for S-ibuprofen prepared by stoichiometric molecular imprinting.
Journal of Materials Chemistry, 22, (22), 11201-11207, (2012)
   

Osmani Q et al., Probing the recognition of molecularly imprinted polymer beads.
Journal of Materials Science, 47, (5), 2218-2227, (2012)
   

Fitzhenry L et al., Molecularly imprinted polymers for corticosteroids: impact of polymer format on recognition behaviour.
Microchimica Acta, 180, (15-16), 1421-1431, (2013)
   

Manesiotis P et al., Molecularly imprinted polymers for the extraction of imiquimod from biological samples using a template analogue strategy.
Analytical Methods, 5, (12), 3122-3128, (2013)
   

McNaughton BR

DePorter SM et al., Programmed cell adhesion and growth on cell-imprinted polyacrylamide hydrogels.
Soft Matter, 8, (40), 10403-10408, (2012)
   

McNerney R

Nicoara SC et al., Development of sample clean up methods for the analysis of Mycobacterium tuberculosis methyl mycocerosate biomarkers in sputum extracts by gas chromatography-mass spectrometry.
Journal of Chromatography B, 986-987, 135-142, (2015)
   

McNiven S

Cheong SH et al., Development of steroid sensors using molecularly imprinted polymers.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 31-31, (1997)
   

Cheong SH et al., Testosterone receptor binding mimic constructed using molecular imprinting.
Macromolecules, 30, (5), 1317-1322, (1997)
   

Levi R et al., Optical detection of chloramphenicol using molecularly imprinted polymers.
Analytical Chemistry, 69, (11), 2017-2021, (1997)
   

McNiven S et al., Enhancing the selectivity of molecularly imprinted polymers.
Chemistry Letters, 26, (12), 1297-1298, (1997)
   

McNiven S et al., Applications of molecularly imprinted polymers to molecules.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 113-113, (1997)
   

Yokobayashi Y et al., Enhancing the selectivity of molecularly imprinted polymers.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 26-26, (1997)
   

McNiven S et al., Chloramphenicol sensor based on an in situ imprinted polymer.
Analytica Chimica Acta, 365, (1-3), 69-74, (1998)
   

Nomura Y et al., Selective recognition of 2, 4-dichlorophenoxyacetic acid using a molecularly imprinted polymer.
Analytical Letters, 31, (6), 973-980, (1998)
   

Rachkov A et al., Molecularly imprinted polymers selective for [beta]-estradiol.
Supramolecular Chemistry, 9, (4), 317-323, (1998)
   

Ji HS et al., Selective piezoelectric odor sensors using molecularly imprinted polymers.
Analytica Chimica Acta, 390, (1-3), 93-100, (1999)
   

Ji HS et al., Increasing the sensitivity of piezoelectric odour sensors based on molecularly imprinted polymers.
Biosensors and Bioelectronics, 15, (7-8), 403-409, (2000)
   

Rachkov A et al., Fluorescence detection of b-estradiol using a molecularly imprinted polymer.
Analytica Chimica Acta, 405, (1-2), 23-29, (2000)
   

McNiven S et al., Book chapter, Towards optical sensors for biologically active molecules, 
In: Molecularly Imprinted Polymers: Man-Made Mimics of Antibodies and their Applications in Analytical Chemistry, Sellergren B (Ed.) Elsevier: Amsterdam, Ch. 20, 467-501, (2001)
   

McNiven SJ

McNiven SJ et al., Book chapter, Application of molecular imprinting to the recognition and detection of bioactive materials, 
In: Molecular and Ionic Recognition with Imprinted Polymers, Bartsch RA, Maeda M (Eds.) The American Chemical Society: Washington DC, Ch. 6, 90-108, (1998)
   

McPherson GL

Tan G et al., Use of a self-assembling organogel as a reverse template in the preparation of imprinted porous polymer films.
Langmuir, 21, (20), 9322-9326, (2005)
   

McReedy T

McReedy T, Extraction using molecularly imprinted polymers.
Chemistry and Industry, (2001)
   

McReedy T, Microreactor for imprinted polymers.
Chemistry and Industry, (2006)
   

McReedy T, Water compatible molecularly imprinted polymers.
Chemistry and Industry, (2008)
   

McReedy T, Highlights (Analytical Chemistry: Creatinine-selective molecularly imprinted polymer).
Chemistry & Industry, 76, (2), 52-57, (2012)
   

McStay D

McStay D et al., Raman spectroscopy of molecular imprinted polymers.
Journal of Optics A: Pure and Applied Optics, 7, (6), S340-S345, (2005)
   

Mclean JS

Harvey SD et al., Preparation and evaluation of spore-specific affinity-augmented bio-imprinted beads.
Analytical and Bioanalytical Chemistry, 386, (2), 211-219, (2006)
   

Mdluli PS

Madikizela LM et al., Experimental and theoretical study of molecular interactions between 2-vinyl pyridine and acidic pharmaceuticals used as multi-template molecules in molecularly imprinted polymer.
Reactive and Functional Polymers, 103, 33-43, (2016)
   

Madikizela LM et al., An initial assessment of naproxen, ibuprofen and diclofenac in Ladysmith water resources in South Africa using molecularly imprinted solid-phase extraction followed by high performance liquid chromatography-photodiode array detection.
South African Journal of Chemistry, 70, (1), 145-153, (2017)
   

Zunngu SS et al., Synthesis and application of a molecularly imprinted polymer in the solid-phase extraction of ketoprofen from wastewater.
Comptes Rendus Chimie, 20, (5), 585-591, (2017)
   

Madikizela LM et al., Application of molecularly imprinted polymer designed for the selective extraction of ketoprofen from wastewater.
Water SA, 44, (3), 406-418, (2018)
   

Qwane SN et al., Synthesis, Characterization and Application of a Molecularly Imprinted Polymer in Selective Adsorption of Abacavir from Polluted Water.
South African Journal of Chemistry, 73, 84-91, (2020)
   

Me JX

Guo MJ et al., Imprinting Recognition of Bovine Hemoglobin with Assistant Recognition Polymer Chains on Silica Surface.
Acta Chimica Sinica, 69, (23), 2877-2881, (2011)
   

Meador DS

Meador DS et al., Absolute Configuration Determination Using Enantiomeric Pairs of Molecularly Imprinted Polymers.
Organic Letters, 16, (5), 1402-1405, (2014)
   

Hebert B et al., Scalemic and racemic imprinting with a chiral crosslinker.
Analytica Chimica Acta, 890, 157-164, (2015)
   

Mecozzi F

Crapnell RD et al., Thermal Detection of Cardiac Biomarkers Heart-Fatty Acid Binding Protein and ST2 Using a Molecularly Imprinted Nanoparticle-Based Multiplex Sensor Platform.
ACS Sensors, 4, (10), 2838-2845, (2019)
   

Jamieson O et al., Screen Printed Electrode Based Detection Systems for the Antibiotic Amoxicillin in Aqueous Samples Utilising Molecularly Imprinted Polymers as Synthetic Receptors.
Chemosensors, 8, (1), ArticleNo5-(2020)
   

Medendorp E

Mann S et al., Pressure-Stable Imprinted Polymers for Waste Water Remediation.
Polymers, 10, (7), ArticleNo704-(2018)
   

Medetalibeyoglu H

Pelin Böke C et al., A new approach for electrochemical detection of organochlorine compound lindane: Development of molecular imprinting polymer with polyoxometalate/carbon nitride nanotubes composite and validation.
Microchemical Journal, 157, Article105012-(2020)
   

Medimagh R

Saadaoui A et al., New biosourced chiral molecularly imprinted polymer: Synthesis, characterization, and evaluation of the recognition capacity of methyltestosterone.
Journal of Molecular Recognition, 30, (4), ArticleNoe2594-(2017)
   

Medina DD

Gabashvili A et al., Templating Mesoporous Silica with Chiral Block Copolymers and Its Application for Enantioselective Separation.
Journal of Physical Chemistry B, 111, (38), 11105-11110, (2007)
   

Medina DD et al., Book chapter, Biomimetic Polymers for Chiral Resolution and Antifreeze Applications, 
In: On Biomimetics, Pramatarova LD (Ed.) InTech: Ch. 15, 321-354, (2011)
   

Medina DM

Amouzadeh Tabrizi M et al., An ultrasensitive molecularly imprinted polymer-based electrochemical sensor for the determination of SARS-CoV-2-RBD by using macroporous gold screen-printed electrode.
Biosensors and Bioelectronics, 196, Article113729-(2022)
   

Medina Rangel PX

Demir B et al., Tracking Hyaluronan: Molecularly Imprinted Polymer Coated Carbon Dots for Cancer Cell Targeting and Imaging.
ACS Applied Materials & Interfaces, 10, (4), 3305-3313, (2018)
   

Medina Rangel PX et al., Solid-phase synthesis of molecularly imprinted polymer nanolabels: Affinity tools for cellular bioimaging of glycans.
Scientific Reports, 9, (1), Article3923-(2019)
   

Mier A et al., Cytocompatibility of Molecularly Imprinted Polymers for Deodorants: Evaluation on Human Keratinocytes and Axillary-Hosted Bacteria.
ACS Applied Bio Materials, 2, (8), 3439-3447, (2019)
   

Medina-Castillo AL

Medina-Castillo AL et al., A semi-empirical model to simplify the synthesis of homogeneous and transparent cross-linked polymers and their application in the preparation of optical sensing films.
Biosensors and Bioelectronics, 25, (2), 442-449, (2009)
   

Medina-Castillo AL et al., Novel Strategy To Design Magnetic, Molecular Imprinted Polymers with Well-Controlled Structure for the Application in Optical Sensors.
Macromolecules, 43, (1), 55-61, (2010)
   

Sainz-Gonzalo FJ et al., Synthesis and characterization of a molecularly imprinted polymer optosensor for TEXs-screening in drinking water.
Biosensors and Bioelectronics, 26, (7), 3331-3338, (2011)
   

Valero-Navarro A et al., Synthesis of a novel polyurethane-based-magnetic imprinted polymer for the selective optical detection of 1-naphthylamine in drinking water.
Biosensors and Bioelectronics, 26, (11), 4520-4525, (2011)
   

Medina-Rangel PX

Panagiotopoulou M et al., Fluorescent molecularly imprinted polymers as plastic antibodies for selective labeling and imaging of hyaluronan and sialic acid on fixed and living cells.
Biosensors and Bioelectronics, 88, 85-93, (2017)
   

Xu JJ et al., Book chapter, Guide to the Preparation of Molecularly Imprinted Polymer Nanoparticles for Protein Recognition by Solid-Phase Synthesis, 
In: NanoArmoring of Enzymes: Rational Design of Polymer-Wrapped Enzymes, Kumar CV (Ed.) Academic Press: Ch. 6, 115-141, (2017)
   

Medine A

Medine A et al., Analysis of selective adsorption of Cu(II) on Cu(II)-imprinted acrylonitrile-co-styrene microspheres by FAAS.
Chinese Journal of Analysis Laboratory, 32, (7), 84-87, (2013)
   

Medine A et al., Preparation of Pb2+ imprinted polymers and analysis of selective adsorption of Pb2+ on polymers by FAAS.
Chinese Journal of Analysis Laboratory, 33, (9), 1077-1081, (2014)
   

Medlock J

Medlock J et al., Cancer bioimprinting and cell shape recognition for diagnosis and targeted treatment.
Chemical Society Reviews, 46, (16), 5110-5127, (2017)
   

Das AAK et al., Bioimprint aided cell recognition and depletion of human leukemic HL60 cells from peripheral blood.
Journal of Materials Chemistry B, 7, (22), 3497-3504, (2019)
   

Medved AV

Kryshtal RG et al., Study of the sorption processes in a piezoelectric-molecularly imprinted polymer film structure using Rayleigh surface acoustic waves.
Technical Physics, 54, (9), 1363-1367, (2009)
   

Kryshtal RG et al., Impulse characteristic as a response of a liquid sensor based on shear-horizontal surface acoustic waves.
Technical Physics, 58, (1), 122-126, (2013)
   

Medved’ AV

Losev VV et al., An acoustic study of the selective absorption of vapors by microporous polymer films (Original Russian Text published in Khimicheskaya Fizika, 2009, Vol. 28, No. 11, pp. 79–92.).
Russian Journal of Physical Chemistry B, Focus on Physics, 3, (6), 990-1003, (2009)
   

Medyantseva EP

Medyantseva EP et al., A procedure for determining 2, 4-dichlorophenoxyacetic acid using immobilized molecular imprinted polymers and an amperometric biosensor.
Russian Journal of Applied Chemistry, 83, (2), 287-292, (2010)
   

Meena S

Rao RN et al., Molecularly imprinted polymer-based, solid-phase extraction followed by liquid chromatographic determination of lacosamide in rat plasma.
Analytical Methods, 6, (9), 3101-3107, (2014)
   

Megantara S

Pratiwi R et al., Comparison of Bulk and Precipitation Polymerization Method of Synthesis Molecular Imprinted Solid Phase Extraction for Atenolol using Methacrylic Acid.
Journal of Young Pharmacists, 11, (1), 12-16, (2019)
   

Meggers E

Meggers E, From Conventional to Unusual Enyzme Inhibitor Scaffolds: The Quest for Target Specificity.
Angewandte Chemie International Edition, 50, (11), 2442-2448, (2011)
   

Megharaj M

Fang C et al., Potentiometric detection of AFFFs based on MIP.
Environmental Technology & Innovation, 5, 52-59, (2016)
   

Meghdadi S

Saraji M et al., Preparation and evaluation of an ion imprinted sol-gel material for selective solid-phase extraction of Ni(II).
International Journal of Environmental Analytical Chemistry, 89, (5), 305-317, (2009)
   

Megumi T

Matsui J et al., Molecularly imprinted nanocomposites for highly sensitive SPR detection of a non-aqueous atrazine sample.
Analyst, 134, (1), 80-86, (2009)
   

Mehamod FS

Cormack PAG et al., Molecularly imprinted polymer synthesis using RAFT polymerisation.
Sains Malaysiana, 42, (4), 529-535, (2013)
   

Mehamod FS et al., The development of molecular imprinting technology for caffeine extraction.
International Journal of Technology, 6, (4), 546-554, (2015)
   

Hashim F et al., In Vitro Toxicity Evaluation of Caffeine Imprinted Polymer (CAF-MIP) for Decaffeination Method on Normal Chang Liver Cells.
Makara Journal of Technology, 21, (1), 19-25, (2017)
   

Othman NA et al., Isotherm Studies of Pyrogallol-imprinted Polymers via Precipitation Polymerization.
International Journal of Technology, 8, (1), 37-47, (2017)
   

Yusof NF et al., Ion-imprinted polymer-based on picolinic acid as a co-functional monomer for highly selective sorption of Cu(II) ions in an aqueous solution.
AIP Conference Proceedings, 1885, (1), ArticleNo020017-(2017)
   

Ali MF et al., Proceeding, Utilizing fluorescein methacrylate as fluorescent functional monomer on synthesizing fluorescent molecularly imprinted polymer in sensing caffeine, 
ArticleNo050005, (2018)
   

Mehamod FS et al., Pyrogallol-imprinted polymers with methyl methacrylate via precipitation polymerization.
AIP Conference Proceedings, 1972, (1), ArticleNo020003-(2018)
   

Yusof NF et al., Characteristics of adsorption isotherm and kinetic study for newly prepared Co2+-imprinted polymer linkage with dipicolinic acid.
IOP Conference Series: Materials Science and Engineering, 440, ArticleNo.012005-(2018)
   

Yusof NF et al., Fabrication and binding characterization of ion imprinted polymers for highly selective Co2+ ions in an aqueous medium.
Journal of Environmental Chemical Engineering, 7, (2), Article103007-(2019)
   

Mehaya FMS

Mansour MSM et al., Valorization of food solid waste by recovery of polyphenols using hybrid molecular imprinted membrane.
Journal of Environmental Chemical Engineering, 6, (4), 4160-4170, (2018)
   

Mehdi YA

Fizir M et al., QbD approach by computer aided design and response surface methodology for molecularly imprinted polymer based on magnetic halloysite nanotubes for extraction of norfloxacin from real samples.
Talanta, 184, 266-276, (2018)
   

Mehdinia A

Mehdinia A et al., Selective adsorption of 2, 4-dinitrophenol on molecularly imprinted nanocomposites of mesoporous silica SBA-15/polyaniline.
Analyst, 137, (18), 4368-4374, (2012)
   

Aziz-Zanjani MO et al., Electrochemically prepared solid-phase microextraction coatings - A review.
Analytica Chimica Acta, 781, 1-13, (2013)
   

Mehdinia A et al., Magnetic molecularly imprinted nanoparticles based on grafting polymerization for selective detection of 4-nitrophenol in aqueous samples.
Journal of Chromatography A, 1283, 82-88, (2013)
   

Mehdinia A et al., Design and synthesis of molecularly imprinted polypyrrole based on nanoreactor SBA-15 for recognition of ascorbic acid.
Biosensors and Bioelectronics, 39, (1), 88-93, (2013)
   

Mehdinia A et al., Advances for sensitive, rapid and selective extraction in different configurations of solid-phase microextraction.
TrAC Trends in Analytical Chemistry, 51, 13-22, (2013)
   

Aziz-Zanjani MO et al., A review on procedures for the preparation of coatings for solid phase microextraction.
Microchimica Acta, 181, (11-12), 1169-1190, (2014)
   

Mehdinia A et al., Design of a surface-immobilized 4-nitrophenol molecularly imprinted polymer via pre-grafting amino functional materials on magnetic nanoparticles.
Journal of Chromatography A, 1364, 12-19, (2014)
   

Dadkhah S et al., A glassy carbon electrode modified with amino-functionalized graphene oxide and molecularly imprinted polymer for electrochemical sensing of bisphenol A.
Microchimica Acta, 183, (6), 1933-1941, (2016)
   

Mehdipour M

Mehdipour M et al., Selective extraction of organophosphorous pesticides in plasma by magnetic molecularly imprinted polymers with the aid of computational design.
Analytical Methods, 10, (34), 4136-4142, (2018)
   

Mehdipour M et al., Selective extraction of malathion from biological fluids by molecularly imprinted polymer coated on spinel ZnFe2O4 magnetic nanoparticles based on green synthesis.
Separation Science and Technology, 56, (11), 1899-1909, (2021)
   

Mehdipour R

Najafi M et al., Molecularly imprinted polymer-based potentiometric sensor for 2-aminopyridine as a potential impurity in piroxicam.
Drug Testing and Analysis, 3, (2), 132-137, (2011)
   

Mehrabi F

Alipanahpour Dil E et al., Magnetic dual-template molecularly imprinted polymer based on syringe-to-syringe magnetic solid-phase microextraction for selective enrichment of p-Coumaric acid and ferulic acid from pomegranate, grape, and orange samples.
Food Chemistry, 325, Article126902-(2020)
   

Alipanahpour Dil E et al., Highly selective magnetic dual template molecularly imprinted polymer for simultaneous enrichment of sulfadiazine and sulfathiazole from milk samples based on syringe-to-syringe magnetic solid-phase microextraction.
Talanta, 232, Article122449-(2021)
   

Mehrafza N

Saraji M et al., A simple approach for the preparation of simazine molecularly imprinted nanofibers via self-polycondensation for selective solid-phase microextraction.
Analytica Chimica Acta, 936, 108-115, (2016)
   

Mehramizi A

Panahi HA et al., Synthesis and characterization of new molecular imprinting poly[1-(N, N-bis-carboxymethyl)amino-3-allylglycerol-co-dimethylacrylamide] for selective sorption and determination of cefuroxime sodium in biological and pharmaceutical samples.
Reactive and Functional Polymers, 73, (1), 132-140, (2013)
   

Shekarchi M et al., Selective extraction of lamivudine in human serum and urine using molecularly imprinted polymer technique.
Journal of Chromatography B, 931, 50-55, (2013)
   

Panahi HA et al., Selective extraction of clonazepam from human plasma and urine samples by molecularly imprinted polymeric beads.
Journal of Separation Science, 37, (6), 691-695, (2014)
   

Pourfarzib M et al., Molecularly imprinted nanoparticles prepared by miniemulsion polymerization as a sorbent for selective extraction and purification of efavirenz from human serum and urine.
Journal of Chromatography B, 974, 1-8, (2015)
   

Pourfarzib M et al., Water-compatible molecularly imprinted polymer as a sorbent for the selective extraction and purification of adefovir from human serum and urine.
Journal of Separation Science, 38, (10), 1755-1762, (2015)
   

Alaei HS et al., Photo-regulated ultraselective extraction of Azatioprine using a novel photoresponsive molecularly imprinted polymer conjugated hyperbranched polymers based magnetic nano-particles.
Polymer, 148, 191-201, (2018)
   

Alaei HS et al., Photoresponsive molecularly imprinted dendrimer-based magnetic nanoparticles for photo-regulated selective separation of azathioprine.
Reactive and Functional Polymers, 136, 58-65, (2019)
   

Baimani N et al., Ultrasensitive separation of methylprednisolone acetate using a photoresponsive molecularly imprinted polymer incorporated polyester dendrimer based on magnetic nanoparticles.
Journal of Separation Science, 42, (7), 1468-1476, (2019)
   

Mehrani K

Aliakbari A et al., Magnetic ion imprinted polymer nanoparticles for the preconcentration of vanadium(IV) ions.
Microchimica Acta, 181, (15-16), 1931-1938, (2014)
   

Sayar O et al., A novel magnetic ion imprinted polymer for selective adsorption of trace amounts of lead(II) ions in environment samples.
Journal of Industrial and Engineering Chemistry, 20, (5), 2657-2662, (2014)
   

Mehrdadian Z

Nezhadali A et al., Nanogram/mL detection of nortriptyline: Preparation of a molecularly imprinted polymer for spectrophotometric determination of nortriptyline based on multivariate optimization methods.
Journal of Separation Science, 42, (22), 3479-3486, (2019)
   

Mehri L

Nezhadali A et al., Determination of benzimidazole in biological model samples using electropolymerized-molecularly imprinted polypyrrole modified pencil graphite sensor.
Sensors and Actuators B: Chemical, 171-172, 1125-1131, (2012)
   

Nezhadali A et al., Determination of methimazole based on electropolymerized-molecularly imprinted polypyrrole modified pencil graphite sensor.
Materials Science and Engineering: C, 85, 225-232, (2018)
   

Mehrpour O

Panahi Y et al., High sensitive and selective nano-molecularly imprinted polymer based electrochemical sensor for midazolam drug detection in pharmaceutical formulation and human urine samples.
Sensors and Actuators B: Chemical, 273, 1579-1586, (2018)
   

Motaharian A et al., Electrochemical determination of atypical antipsychotic drug quetiapine using nano-molecularly imprinted polymer modified carbon paste electrode.
Analytica Chimica Acta, 1097, 214-221, (2020)
   

Mehrseresht S

Khorrami AR et al., Synthesis and evaluation of a selective molecularly imprinted polymer for the contraceptive drug levonorgestrel.
Journal of Chromatography B, 867, (2), 264-269, (2008)
   

Mehrzad-Samarin M

Mehrzad-Samarin M et al., A novel metronidazole fluorescent nanosensor based on graphene quantum dots embedded silica molecularly imprinted polymer.
Biosensors and Bioelectronics, 92, 618-623, (2017)
   

Ahmadi H et al., Entacapone detection by a GOQDs-molecularly imprinted silica fluorescent chemical nanosensor.
Analytical and Bioanalytical Chemistry, 411, (5), 1075-1084, (2019)
   

Mehrzad-Samarin M et al., A luminescence nanosensor for Ornidazole detection using graphene quantum dots entrapped in silica molecular imprinted polymer.
Spectrochimica Acta Part A-Molecular and Biomolecular Spctroscopy, 206, 430-436, (2019)
   

Mehta J

Van Dorst B et al., Recent advances in recognition elements of food and environmental biosensors: A review.
Biosensors and Bioelectronics, 26, (4), 1178-1194, (2010)
   

Mehta R

Mehta R, Making a mark.
Materials World, 15, (3), 11-11, (2007)
   

Mehta R et al., A micro-solid phase extraction device to prepare a molecularly imprinted porous monolith in a facile mode for fast protein separation.
Journal of Chromatography A, 1627, Article461415-(2020)
   

Mehta S

Sha X et al., Molecularly imprinted polymer, nanoparticles, and the quartz crystal microbalance in combination evaluate bisphenol A in water.
Abstracts of Papers of the American Chemical Society, 246, (ANYL), 26-(2013)
   

Mei F

Xiang HY et al., Preparation of resveratrol molecularly imprinted composite membranes and its selectivity to the template.
Chinese Journal of Applied Chemistry, 26, (7), 786-790, (2009)
   

Mei FS

Li N et al., Bio-inspired virus imprinted polymer for prevention of viral infections.
Acta Biomaterialia, 51, 175-183, (2017)
   

Mei K

Zhang N et al., Molecularly Imprinted Materials for Selective Biological Recognition.
Macromolecular Rapid Communications, 40, (17), Article1900096-(2019)
   

Mei PC

Hu YF et al., The amino-terminal structure of human fragile X mental retardation protein obtained using precipitant-immobilized imprinted polymers.
Nature Communications, 6, ArticleNo6634-(2015)
   

Mei QS

Guan GJ et al., Molecularly imprinted polypyrrole nanonecklaces for detection of herbicide through molecular recognition-amplifying current response.
Analytica Chimica Acta, 702, (2), 239-246, (2011)
   

Guan GJ et al., Molecularly Imprinted Shells from Polymer and Xerogel Matrices on Polystyrene Colloidal Spheres.
Chemistry - A European Journal, 18, (15), 4692-4698, (2012)
   

Mei QZ

Wu ZY et al., Molecularly imprinted electrochemical sensor for the detection of phenothrin.
Journal of Hunan University Natural Sciences, 40, (10), 78-82, (2013)
   

Mei SR

Cai LS et al., Molecularly imprinted polymer for theophylline retention and molecular recognition properties in capillary electrochromatography.
Wuhan University Journal of Natural Sciences, 9, (3), 359-365, (2004)
   

Jiang M et al., Direct enrichment and high performance liquid chromatography analysis of ultra-trace Bisphenol A in water samples with narrowly dispersible Bisphenol A imprinted polymeric microspheres column.
Journal of Chromatography A, 1110, (1-2), 27-34, (2006)
   

Jiang M et al., Determination of ultra-trace bisphenol A in water samples by chromatography with large volume direct injection.
Chinese Journal of Analytical Chemistry, 34, (10), 1419-1422, (2006)
   

Shi Y et al., Selective solid-phase extraction of cholesterol using molecularly imprinted polymers and its application in different biological samples.
Journal of Pharmaceutical and Biomedical Analysis, 42, (5), 549-555, (2006)
   

Zhang JH et al., Selective solid-phase extraction of bisphenol A using molecularly imprinted polymers and its application to biological and environmental samples.
Analytical and Bioanalytical Chemistry, 385, (4), 780-786, (2006)
   

Hu ML et al., Selective solid-phase extraction of tebuconazole in biological and environmental samples using molecularly imprinted polymers.
Analytical and Bioanalytical Chemistry, 387, (3), 1007-1016, (2007)
   

Jing T et al., Preparation of high selective molecularly imprinted polymers for tetracycline by precipitation polymerization.
Chinese Chemical Letters, 18, (12), 1535-1538, (2007)
   

Jiang M et al., Preparation of Mono-disperse Bisphenol A Imprinted Polymer Microspheres and Their Chromatographic Properties.
Chinese Journal of Analytical Chemistry, 36, (8), 1089-1092, (2008)
   

Wang Y et al., Preparation and Evaluation of 2-Chlorophenol Imprinted Polymers by Bulk Polymerization.
Journal of Analytical Science, 24, (5), 531-534, (2008)
   

Dai Q et al., Preparation and evaluation of Sudan Red I molecularly imprinted polymer.
Chinese Journal of Chromatography, 27, (6), 764-768, (2009)
   

Jing T et al., Determination of trace tetracycline antibiotics in foodstuffs by liquid chromatography–tandem mass spectrometry coupled with selective molecular-imprinted solid-phase extraction.
Analytical and Bioanalytical Chemistry, 393, (8), 2009-2018, (2009)
   

Jing T et al., Magnetic molecularly imprinted nanoparticles for recognition of lysozyme.
Biosensors and Bioelectronics, 26, (2), 301-306, (2010)
   

Jing T et al., Preparation of mixed-templates molecularly imprinted polymers and investigation of the recognition ability for tetracycline antibiotics.
Biosensors and Bioelectronics, 25, (10), 2218-2224, (2010)
   

Jing T et al., Determination of trace 2, 4-dinitrophenol in surface water samples based on hydrophilic molecularly imprinted polymers/nickel fiber electrode.
Biosensors and Bioelectronics, 26, (11), 4450-4456, (2011)
   

Jing T et al., Online coupling of molecularly imprinted solid-phase extraction to HPLC for determination of trace tetracycline antibiotic residues in egg samples.
Journal of Separation Science, 34, (12), 1469-1476, (2011)
   

Jing T et al., Rapid and selective determination of urinary lysozyme based on magnetic molecularly imprinted polymers extraction followed by chemiluminescence detection.
Analytica Chimica Acta, 692, (1-2), 73-79, (2011)
   

Mei SR et al., Determination of trace bisphenol A in complex samples using selective molecularly imprinted solid-phase extraction coupled with capillary electrophoresis.
Microchemical Journal, 98, (1), 150-155, (2011)
   

Niu JW et al., Molecularly Imprinted Solid-phase Extraction Coupled with High Performance Liquid Chromatography for Determination of Trace Melamine in Milk Powder.
Acta Medicinae Universitatis Scientiae et Technologiae Huazhong, 41, (2), 185-189, (2012)
   

Xia H et al., Determination of Three Fluoroquinolones Antibiotics Residue in Honey Using Molecularly Imprinted Solid-phase Extraction Coupled with High Performance Liquid Chromatography.
Journal of Analytical Science, 28, (3), 297-302, (2012)
   

Jing T et al., Molecularly imprinted spin column extraction coupled with high-performance liquid chromatography for the selective and simple determination of trace nitrophenols in water samples.
Journal of Separation Science, 37, (20), 2940-2946, (2014)
   

Jing T et al., Highly effective removal of 2, 4-dinitrophenolic from surface water and wastewater samples using hydrophilic molecularly imprinted polymers.
Environmental Science and Pollution Research, 21, (2), 1153-1162, (2014)
   

Song B et al., Selective and sensitive determination of erythromycin in honey and dairy products by molecularly imprinted polymers based electrochemical sensor.
Microchemical Journal, 116, 183-190, (2014)
   

Song B et al., Determination of erythromycin residue in pork samples using molecularly imprinted solid phase extraction coupled with high performance liquid chromatography.
Chinese Journal of Chromatography, 32, (10), 1111-1116, (2014)
   

Li BB et al., Highly selective and sensitive determination of dopamine by the novel molecularly imprinted poly(nicotinamide)/CuO nanoparticles modified electrode.
Biosensors and Bioelectronics, 67, 121-128, (2015)
   

Zhou YS et al., Rapid and selective extraction of multiple macrolide antibiotics in foodstuff samples based on magnetic molecularly imprinted polymers.
Talanta, 137, 1-10, (2015)
   

Huang K et al., Selective Solid-Phase Extraction of Lead Ions in Water Samples Using Three-Dimensional Ion-Imprinted Polymers.
Analytical Chemistry, 88, (13), 6820-6826, (2016)
   

Zhou TT et al., Selective and sensitive detection of tetrabromobisphenol-A in water samples by molecularly imprinted electrochemical sensor.
Sensors and Actuators B: Chemical, 236, 153-162, (2016)
   

Zhou TT et al., Fabrication of a Selective and Sensitive Sensor Based on Molecularly Imprinted Polymer/Acetylene Black for the Determination of Azithromycin in Pharmaceuticals and Biological Samples.
PLoS ONE, 11, (1), ArticleIDe0147002-(2016)
   

Huang K et al., Integrated ion imprinted polymers-paper composites for selective and sensitive detection of Cd(II) ions.
Journal of Hazardous Materials, 333, 137-143, (2017)
   

Hu LQ et al., A rapid and sensitive molecularly imprinted electrochemiluminescence sensor for Azithromycin determination in biological samples.
Journal of Electroanalytical Chemistry, 813, 1-8, (2018)
   

Feng JW et al., Highly sensitive and selective fluorescent sensor for tetrabromobisphenol-A in electronic waste samples using molecularly imprinted polymer coated quantum dots.
Microchemical Journal, 144, 93-101, (2019)
   

Hu LQ et al., Bioaccumulation of tetrabromobisphenol A in a laboratory-based fish-water system based on selective magnetic molecularly imprinted solid-phase extraction.
Science of The Total Environment, 650, 1356-1362, (2019)
   

Mei XC

Li N et al., Electrochemical sensor based on dual-template molecularly imprinted polymer and nanoporous gold leaf modified electrode for simultaneous determination of dopamine and uric acid.
Microchimica Acta, 187, (9), Article496-(2020)
   

Mei XL

Li XX et al., Development and application of novel clonazepam molecularly imprinted coatings for stir bar sorptive extraction.
Journal of Colloid and Interface Science, 468, 183-191, (2016)
   

Mei XQ

He XP et al., Determination of diethylstilbestrol in seawater by molecularly imprinted solid-phase extraction coupled with high-performance liquid chromatography.
Marine Pollution Bulletin, 102, (1), 142-147, (2016)
   

Mei XQ et al., Separation and Determination of Gonyautoxins 1, 4 in Seawater by Molecularly Imprinted Solid Phase Extraction Coupled with High Performance Liquid Chromatography.
Chinese Journal of Analytical Chemistry, 44, (2), 212-217, (2016)
   

Mei XQ et al., Molecularly imprinted polymer as efficient sorbent of solid-phase extraction for determination of gonyautoxin 1, 4 in seawater followed by high-performance liquid chromatography-fluorescence detection.
Analytical and Bioanalytical Chemistry, 408, (21), 5737-5743, (2016)
   

Mei XY

Mei XY et al., Review on Analysis Methodology of Phenoxy Acid Herbicide Residues.
Food Analytical Methods, 9, (6), 1532-1561, (2016)
   

Mei Y

Guo ZZ et al., Molecularly Imprinted Polymer/Metal Organic Framework Based Chemical Sensors.
Coatings, 6, (4), ArticleNo42-(2016)
   

Meier F

Meier F et al., Book chapter, Molecularly Imprinted Polymers as Artificial Receptors, 
In: Artificial Receptors for Chemical Sensors, Mirsky VM, Yatsimirsky AK (Eds.) Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, Ch. 13, 391-437, (2010)
   

Eppler S et al., A novel extraction device for efficient clean-up of molecularly imprinted polymers.
Analytical Methods, 4, (8), 2296-2299, (2012)
   

Meier F et al., A novel approach for the direct determination of residual template molecules in molecularly imprinted polymer matrices.
Analytical Methods, 4, (9), 2755-2758, (2012)
   

Meier F et al., Computational and experimental study on the influence of the porogen on the selectivity of 4-nitrophenol molecularly imprinted polymers.
Analytica Chimica Acta, 744, 68-74, (2012)
   

Meier MAR

Hoogenboom R et al., Combinatorial methods, automated synthesis and high-throughput screening in polymer research: Past and present.
Macromolecular Rapid Communications, 24, (1), 16-32, (2003)
   

Meier MAR et al., Combinatorial methods, automated synthesis and high-throughput screening in polymer research: The evolution continues.
Macromolecular Rapid Communications, 25, (1), 21-33, (2004)
   

Meier W

Meier W, Template polymerization: Structure control at the nanometer level.
Chimia, 53, (5), 214-215, (1999)
   

Cumbo A et al., A synthetic nanomaterial for virus recognition produced by surface imprinting.
Nature Communications, 4, Art. No. 1503-(2013)
   

El Idrissi M et al., Nanosensors based on polymer vesicles and planar membranes: a short review.
Journal of Nanobiotechnology, 16, (1), ArticleNo63-(2018)
   

Meijer EW

Helmich F et al., Chiral Memory via Chiral Amplification and Selective Depolymerization of Porphyrin Aggregates.
Journal of the American Chemical Society, 132, (47), 16753-16755, (2010)
   

Meininger GA

Hawkins DM et al., Quantification and Confocal Imaging of Protein Specific Molecularly Imprinted Polymers.
Biomacromolecules, 7, (9), 2560-2564, (2006)
   

Meischl F

Meischl F et al., Synthesis and evaluation of a novel molecularly imprinted polymer for the selective isolation of acetylsalicylic acid from aqueous solutions.
Journal of Environmental Chemical Engineering, 4, (Part A), 4083-4090, (2016)
   

Meisel H

Schirmer C et al., Synthesis of a molecularly imprinted polymer for the selective solid-phase extraction of chloramphenicol from honey.
Journal of Chromatography A, 1132, (1-2), 325-328, (2006)
   

Schirmer C et al., Molecularly imprinted polymers for the selective solid-phase extraction of chloramphenicol.
Analytical and Bioanalytical Chemistry, 392, (1), 223-229, (2008)
   

Schirmer C et al., Synthesis and Evaluation of Molecularly Imprinted Polymers (MIP) with Affinity for the Polypeptide Nisin.
Food Analytical Methods, 2, (4), 257-263, (2009)
   

Schirmer C et al., Chromatographic evaluation of polymers imprinted with analogs of chloramphenicol and application to selective solid-phase extraction.
Analytical and Bioanalytical Chemistry, 394, (8), 2249-2255, (2009)
   

Meitl MA

Hua F et al., Polymer imprint lithography with molecular-scale resolution.
Nano Letters, 4, (12), 2467-2471, (2004)
   

Meizoso-López MDC

Calvo-Rolle JL et al., Oil degradation monitoring with chemical sensors and molecular imprinted polymer.
Dyna, 85, (9), 738-745, (2010)
   

Mejri A

Mars A et al., Molecularly imprinted curcumin nanoparticles decorated paper for electrochemical and fluorescence dual-mode sensing of bisphenol A.
Microchimica Acta, 188, (3), Article94-(2021)
   

Mekhalif T

Ayadi H et al., Molecularly imprinted PVC beads for the recognition of proteins.
Journal of Applied Polymer Science, 133, (33), ArticleNo43694-(2016)
   

Mekky AEM

Attia MS et al., Book chapter, Nano-optical Biosensors for Assessment of Food Contaminants, 
In: Functional Biopolymers, Thakur VK, Thakur MK (Eds.) Springer International Publishing: Cham, Ch. 1, 1-23, (2018)
   

Mekky W

Mokhtar M et al., Preparation and characterization of ion selective membrane and its application for Cu2+ removal.
Journal of Industrial and Engineering Chemistry, 60, 475-484, (2018)
   

Melchert WR

Rocha FRP et al., Solid-phase extractions in flow analysis.
Anais da Academia Brasileira de Ciências, 90, (1 Suppl. 1), 803-824, (2018)
   

Melde BJ

Johnson BJ et al., Imprinted Nanoporous Organosilicas for Selective Adsorption of Nitroenergetic Targets.
Langmuir, 24, (16), 9024-9029, (2008)
   

Trammell SA et al., Nanoporous Organosilicas as Preconcentration Materials for the Electrochemical Detection of Trinitrotoluene.
Analytical Chemistry, 80, (12), 4627-4633, (2008)
   

Borghard WG et al., Characterization and Testing of Periodic Mesoporous Organosilicas as Potential Selective Benzene Adsorbents.
Langmuir, 25, (21), 12661-12669, (2009)
   

Melde BJ et al., Macroporous periodic mesoporous organosilicas with diethylbenzene bridging groups.
Microporous And Mesoporous Materials, 130, (1-3), 180-188, (2010)
   

Melde BJ et al., Mesoporous materials in sensing: morphology and functionality at the meso-interface.
Analytical and Bioanalytical Chemistry, 398, (4), 1565-1573, (2010)
   

Johnson BJ et al., Proceeding, Functional and functionalized silicate materials, 
19-24, (2011)
   

Trammell SA et al., Electrochemical detection of TNT with in-line pre-concentration using imprinted diethylbenzene-bridged periodic mesoporous organosilicas.
Sensors and Actuators B: Chemical, 155, (2), 737-744, (2011)
   

Johnson BJ et al., Adsorption of organophosphates from solution by porous organosilicates: Capillary phase-separation.
Microporous And Mesoporous Materials, 195, 154-160, (2014)
   

Mele G

del Sole R et al., Noncovalent imprinted microspheres: Preparation, evaluation and selectivity of DBU template.
Journal of Applied Polymer Science, 105, (4), 2190-2197, (2007)
   

Vasapollo G et al., Molecularly Imprinted Polymers: Present and Future Prospective.
International Journal of Molecular Sciences, 12, (9), 5908-5945, (2011)
   

Di Bello PM et al., A New Ion-Imprinted Chitosan-Based Membrane with an Azo-Derivative Ligand for the Efficient Removal of Pd(II).
Materials, 10, (10), ArticleNo1133-(2017)
   

Melnik V

Kochkodan V et al., Selective recognition of organic pollutants in aqueous solutions with composite imprinted membranes.
Advances in Colloid and Interface Science, 159, (2), 180-188, (2010)
   

Kochkodan V et al., The express monitoring of organic pollutants in water with composite imprinted membranes.
Journal of Membrane Science, 377, (1-2), 151-158, (2011)
   

Melo A

Rebelo P et al., Azithromycin electrochemical detection using a molecularly imprinted polymer prepared on a disposable screen-printed electrode.
Analytical Methods, 12, (11), 1486-1494, (2020)
   

Rebelo P et al., Rational development of molecular imprinted carbon paste electrode for Furazolidone detection: theoretical and experimental approach.
Sensors and Actuators B: Chemical, 329, Article129112-(2021)
   

Melo JS

Melo JS et al., Spray drying as a novel technique for obtaining microbial imprinted microspheres and its application in filtration.
Soft Matter, 9, (3), 805-810, (2013)
   

Melo LP

Melo LP et al., A molecularly imprinted polymer for microdisc solid-phase extraction of parabens from human milk samples.
Analytical Methods, 5, (14), 3538-3545, (2013)
   

Queiroz MEC et al., Selective capillary coating materials for in-tube solid-phase microextraction coupled to liquid chromatography to determine drugs and biomarkers in biological samples: A review.
Analytica Chimica Acta, 826, 1-11, (2014)
   

Souza ID et al., Selective molecularly imprinted polymer combined with restricted access material for in-tube SPME/UHPLC-MS/MS of parabens in breast milk samples.
Analytica Chimica Acta, 932, 49-59, (2016)
   

Roldão MV et al., Development of Molecularly Imprinted Polymers for Solid Phase Extraction of Parabens in Plasma Samples and Analysis by UHPLC-MS/MS .
Journal of the Brazilian Chemical Society, 28, (2), 257-265, (2017)
   

Memarbashi N

Alizadeh T et al., Evaluation of the facilitated transport capabilities of nano- and micro-sized molecularly imprinted polymers (MIPs) in a bulk liquid membrane system.
Separation and Purification Technology, 90, (1), 83-91, (2012)
   

Memon F

Memon GZ et al., Synthesis and Characterization of Ion-Imprinted Polymer for Selective Adsorption of Zinc Ions in Aqueous media.
Asian Journal of Chemistry, 29, (6), 1229-1234, (2017)
   

Memon GZ

Memon GZ et al., Synthesis and Characterization of Ion-Imprinted Polymer for Selective Adsorption of Zinc Ions in Aqueous media.
Asian Journal of Chemistry, 29, (6), 1229-1234, (2017)
   

Memon N

Shaikh H et al., Preparation and characterization of molecularly imprinted polymer for di(2-ethylhexyl) phthalate: Application to sample clean-up prior to gas chromatographic determination.
Journal of Chromatography A, 1247, (1), 125-133, (2012)
   

Shaikh H et al., Core-shell molecularly imprinted polymer-based solid-phase microextraction fiber for ultra trace analysis of endosulfan I and II in real aqueous matrix through gas chromatography-micro electron capture detector.
Journal of Chromatography A, 1337, 179-187, (2014)
   

Shaikh H et al., Synthesis and characterization of molecularly imprinted polymer embedded composite cryogel discs: application for the selective extraction of cypermethrins from aqueous samples prior to GC-MS analysis.
RSC Advances, 5, (34), 26604-26615, (2015)
   

Shaikh H et al., Molecularly imprinted surface plasmon resonance (SPR) based sensing of bisphenol A for its selective detection in aqueous systems.
Analytical Methods, 7, (11), 4661-4670, (2015)
   

Men C

Ye QC et al., Preparation of a molecularly imprinted test strip for point-of-care detection of thiodiglycol, a sulfur mustard poisoning metabolic marker.
Talanta, 234, Article122701-(2021)
   

Men HF

Men HF et al., Synthesis, properties and application research of atrazine Fe₃O₄@SiO₂ magnetic molecularly imprinted polymer.
Environmental Science and Pollution Research, 19, (6), 2271-2280, (2012)
   

Huang J et al., Molecularly imprinted polymer coating with fluorescence on magnetic particle.
Macromolecular Research, 21, (9), 1021-1028, (2013)
   

Men JY

Gao BJ et al., Constructing chiral caves and efficiently separating enantiomers of glutamic acid with novel surface-imprinting technique.
Journal of Chromatography A, 1218, (32), 5441-5448, (2011)
   

Men JY et al., Preparation of 5-Fluorouracil-Surface Imprinted Microspheres MIP-PSSS/CPVA and Studies on its Character of Colon-Specific Drug Delivery.
Acta Chimica Sinica, 70, (21), 2273-2280, (2012)
   

Cheng W et al., Preparing Surface Molecularly imprinted Material of Pirimicarb Based on Surface-initiated Graft-polymerization and Studies on its Molecular Recognition Character.
Acta Polymerica Sinica, (7), 934-942, (2013)
   

Men JY et al., Preparation and Characterization of Metronidazole-Surface Imprinted Microspheres MIP-PSSS/CPVA for Colon-Specific Drug Delivery System.
Journal of Macromolecular Science, Part A, 51, (11), 914-923, (2014)
   

Yang Q et al., Design and Preparation of Ferulic Acid Surface-Imprinted Material and Its Molecular Recognition Characteristic.
Polymer Materials Science and Engineering, 32, (2), 173-178+185, (2016)
   

Dong CY et al., Molecularly imprinted polymers by the surface imprinting technique.
European Polymer Journal, 145, Article110231-(2021)
   

Men'shikova AY

Moskalenko Y et al., A ¹H NMR study of Nile Red solvation (Original Russian Text © Yu.E. Moskalenko, A.Yu. Men'shikova, N.N. Shevchenko, V.V. Faraonova, A.V. Gribanov, 2011, published in Khimiya Vysokikh Energii, 2011, Vol. 45, No. 3, pp. 214-218.).
High Energy Chemistry, 45, (3), 183-187, (2011)
   

Men'shikova AYu

Men’shikova AYu et al., Sorption of vapors of aromatic compounds by cross-linked polymer particles containing luminophores: A spectroscopic study.
Russian Journal of Applied Chemistry, 83, (11), 1997-2005, (2010)
   

Men’shikova AYu et al., Monodisperse polymer particles with molecular imprints of naphthalene in the shell: Synthesis and adsorption properties.
Russian Journal of Applied Chemistry, 84, (9), 1567-1574, (2011)
   

Koshkin AV et al., Naphthalene vapor sorption by polymer nanoparticles with molecularly imprinted shells (Original Russian Text © A.V. Koshkin, V.A. Sazhnikov, A.Yu. Men'shikova, G.A. Pankova, T.G. Evseeva, M.V. Alfimov, 2012, published in Rossiiskie Nanotekhnologii, 2012, Vol. 7, Nos. 1–2.).
Nanotechnologies in Russia, 7, (1), 15-21, (2012)
   

Men’shikova AYu et al., Crosslinked monodisperse particles containing luminophore groups in shells for molecular recognition of lower alcohols (Original Russian Text © A.Yu. Men'shikova, N.N. Shevchenko, T.G. Evseeva, A.V. Koshkin, G.A. Pankova, B.M. Shabsel's, V.V. Faraonova, M.Ya. Goikhman, A.V. Yakimanskii, V.A. Sazhnikov, M.V. Alfimov, 2012, published in Russian in Vysokomolekulyarnye Soedineniya, Ser. B, 2012, Vol. 54, No. 1, pp. 93 - 101.).
Polymer Science Series B, 54, (1), 21-29, (2012)
   

Mena ML

Mena ML et al., Molecularly imprinted polymers for on-line preconcentration by solid phase extraction of pirimicarb in water samples.
Analytica Chimica Acta, 451, (2), 297-304, (2002)
   

Mena ML et al., Molecularly imprinted polymers for on-line clean up and preconcentration of chloramphenicol prior to its voltammetric determination.
Analytical and Bioanalytical Chemistry, 376, (1), 18-25, (2003)
   

Menager C

Griffete N et al., Design of magnetic molecularly imprinted polymer nanoparticles for controlled release of doxorubicin under an alternative magnetic field in athermal conditions.
Nanoscale, 7, (45), 18891-18896, (2015)
   

Boitard C et al., Surface-initiated synthesis of bulk-imprinted magnetic polymers for protein recognition.
Chemical Communications, 53, (63), 8846-8849, (2017)
   

Boitard C et al., Magnetic protein imprinted polymers: a review.
Journal of Materials Chemistry B, 6, (11), 1563-1580, (2018)
   

Menaker A

Syritski V et al., Electrosynthesized molecularly imprinted polypyrrole films for enantioselective recognition of l-aspartic acid.
Electrochimica Acta, 53, (6), 2729-2736, (2008)
   

Menaker A et al., Electrosynthesized Surface-Imprinted Conducting Polymer Microrods for Selective Protein Recognition.
Advanced Materials, 21, (22), 2271-2275, (2009)
   

Öpik A et al., Molecularly imprinted polymers: a new approach to the preparation of functional materials.
Proceedings of the Estonian Academy of Sciences, 58, (1), 3-11, (2009)
   

Menale C

Nicolucci C et al., A high selective and sensitive liquid chromatography-tandem mass spectrometry method for quantization of BPA urinary levels in children.
Analytical and Bioanalytical Chemistry, 405, (28), 9139-9148, (2013)
   

Menceloglu YZ

Avaz S et al., Graphene based nanosensor for aqueous phase detection of nitroaromatics.
RSC Advances, 7, (41), 25519-25527, (2017)
   

Mendecki L

Sundhoro M et al., Rapid and accurate electrochemical sensor for food allergen detection in complex foods.
Scientific Reports, 11, (1), Article20831-(2021)
   

Sundhoro M et al., An electrochemical molecularly imprinted polymer sensor for rapid and selective food allergen detection.
Food Chemistry, 344, Article128648-(2021)
   

Mendes PM

Stephenson-Brown A et al., Selective glycoprotein detection through covalent templating and allosteric click-imprinting.
Chemical Science, 6, (9), 5114-5119, (2015)
   

Mitchell P et al., Precise Generation of Selective Surface-Confined Glycoprotein Recognition Sites.
ACS Applied Bio Materials, 2, (6), 2617-2623, (2019)
   

Mendes TPP

Mendes TPP et al., Molecularly imprinted polymer-coated paper as a substrate for highly sensitive analysis using paper spray mass spectrometry: quantification of metabolites in urine.
Analytical Methods, 9, (43), 6117-6123, (2017)
   

Mendes TV

do Lago AC et al., Ion Imprinted Polymer for Preconcentration and Determination of Ultra-Trace Cadmium, Employing Flow Injection Analysis with Thermo Spray Flame Furnace Atomic Absorption Spectrometry.
Applied Spectroscopy, 70, (11), 1842-1850, (2016)
   

Mendez S

Heidt B et al., Biomimetic Bacterial Identification Platform Based on Thermal Transport Analysis Through Surface Imprinted Polymers: From Proof of Principle to Proof of Application.
physica status solidi (a), 216, (12), Article1800688-(2019)
   

Mendez-Orozco A

Aburto J et al., Hydrogels as adsorbents of organosulphur compounds currently found in diesel.
Chemical Engineering and Processing: Process Intensification, 43, (12), 1587-1595, (2004)
   

Mendonca JAFR

Freitas LAdS et al., Molecularly imprinted fibers with renewable surface for solid-phase microextraction of triazoles from grape juice samples followed by gas chromatography mass spectrometry analysis.
Analyst, 139, (3), 626-632, (2014)
   

Mendonça PV

Mendonça PV et al., Polymeric bile acid sequestrants - Synthesis using conventional methods and new approaches based on ''controlled''/living radical polymerization.
Progress in Polymer Science, 38, (3-4), 445-461, (2013)
   

Mendonça Telles AD

Martins RO et al., Molecularly imprinted polymer as solid phase extraction phase for condensed tannin determination from Brazilian natural sources.
Journal of Chromatography A, 1620, Article460977-(2020)
   

Menduni S

Hantash J et al., Use of an on-line imprinted polymer pre-column, for the liquid chromatographic-UV absorbance determination of carbaryl and its metabolite in complex matrices.
Journal of Chromatography A, 1125, (1), 104-111, (2006)
   

Menegazzo N

Menegazzo N et al., Proceeding, IR-ATR spectroscopic characterization of molecularly imprinted poly(4-vinylpyridine) electropolymerized onto an optically transparent electrode, 
910, (2004)
   

Wang J et al., Glucose detection with surface plasmon resonance spectroscopy and molecularly imprinted hydrogel coatings.
Talanta, 86, (1), 133-141, (2011)
   

Meng AC

Meng AC et al., Multi-analyte imprinting capability of OMNiMIPs versus traditional molecularly imprinted polymers.
Journal of Molecular Recognition, 22, (2), 121-128, (2009)
   

Meng CY

Song XQ et al., Molecularly imprinted solid-phase extraction for the determination of ten macrolide drugs residues in animal muscles by liquid chromatography-tandem mass spectrometry.
Food Chemistry, 208, 169-176, (2016)
   

Zhou T et al., Determination of azithromycin residue in pork using a molecularly imprinted monolithic microcolumn coupled to liquid chromatography with tandem mass spectrometry.
Journal of Separation Science, 39, (7), 1339-1346, (2016)
   

Meng FH

Zhao L et al., Synthesis and properties study of heppuric acid molecularly imprinted polymer.
Chemical Engineer, 23, (10), 4-6, (2007)
   

Meng FP

Meng FP et al., Molecularly Imprinted Polymers and Their Application to Solid-Phase Extraction.
Journal of Ocean University of Qingdao, 38, (2), 237-243, (2008)
   

Liu J et al., Influence of solvents and functional monomers on preparation of methyl parathion molecularly imprinted polymers.
Journal of Chemical Engineering of Chinese Universities, 23, (6), 967-972, (2009)
   

Liu J et al., Spectroscopy Study of Methyl Parathion Molecularly Imprinted Polymers.
Spectroscopy and Spectral Analysis, 29, (10), 2756-2759, (2009)
   

Meng H

Meng H et al., Synthesis of a highly dense and selective imprinted polymer via pre-irradiated surface-initiated graft polymerization.
Journal of Materials Chemistry A, 3, (25), 13237-13243, (2015)
   

Meng H et al., Synthesis and characterization of surface ion-imprinted polymer based on SiO2-coated graphene oxide for selective adsorption of uranium(VI).
RSC Advances, 5, (83), 67662-67668, (2015)
   

Meng H et al., Preparation and characterization of surface imprinted polymer for selective sorption of uranium(VI).
Journal of Radioanalytical and Nuclear Chemistry, 306, (1), 139-146, (2015)
   

Meng HJ

Bao H et al., Surface Plasmon Resonance Sensor for Supersensitive Detection of Clenbuterol Using Molecularly Imprinted Film.
Chemistry Letters, 41, (3), 237-239, (2012)
   

Meng J

Gao BJ et al., Preparation of Fe(III) ion surface-imprinted material for removing Fe(III) impurity from lanthanide ion solutions.
Journal of Industrial and Engineering Chemistry, 24, 351-358, (2015)
   

Meng J et al., Microextraction by Packed Molecularly Imprinted Polymer Combined Ultra-High-Performance Liquid Chromatography for the Determination of Levofloxacin in Human Plasma.
Journal of Chemistry, 2019, Article4783432-(2019)
   

Meng JJ

Xu W et al., Creating magnetic ionic liquid-molecularly imprinted polymers for selective extraction of lysozyme.
RSC Advances, 8, (39), 21850-21856, (2018)
   

Huang QW et al., Molecularly Imprinted Poly(thionine)-Based Electrochemical Sensing Platform for Fast and Selective Ultratrace Determination of Patulin.
Analytical Chemistry, 91, (6), 4116-4123, (2019)
   

Wei XX et al., Ionic liquids skeleton typed magnetic core-shell molecularly imprinted polymers for the specific recognition of lysozyme.
Analytica Chimica Acta, 1081, 81-92, (2019)
   

Xu W et al., Fabrication of magnetic polymers based on deep eutectic solvent for separation of bovine hemoglobin via molecular imprinting technology.
Analytica Chimica Acta, 1048, 1-11, (2019)
   

Meng JW

Meng JW et al., Novel molecularly imprinted magnetic nanoparticles for the selective extraction of protoberberine alkaloids in herbs and rat plasma.
Journal of Separation Science, 38, (12), 2117-2125, (2015)
   

Meng L

Meng L et al., Study of an Online Molecularly Imprinted Solid Phase Extraction Coupled to Chemiluminescence Sensor for the Determination of Trichlorfon in Vegetables.
Journal of Agricultural and Food Chemistry, 59, (24), 12745-12751, (2011)
   

Meng L et al., Development of a Direct Competitive Biomimetic Enzyme-Linked Immunosorbent Assay Based on a Hydrophilic Molecularly Imprinted Membrane for the Determination of Trichlorfon Residues in Vegetables.
Food Analytical Methods, 5, (5), 1229-1236, (2012)
   

Meng L et al., Fast screening of ketamine in biological samples based on molecularly imprinted photonic hydrogels.
Analytica Chimica Acta, 771, 86-94, (2013)
   

Meng L et al., Molecularly imprinted photonic hydrogels for fast screening of atropine in biological samples with high sensitivity.
Forensic Science International, 231, (1-3), 6-12, (2013)
   

Meng L et al., Preparation of bisphenol A molecular-imprinted materials and its recognition characteristic.
Chinese Journal of Analysis Laboratory, 33, (12), 1397-1401, (2014)
   

Meng L et al., Water-compatible Molecularly Imprinted Photonic Hydrogels for Fast Screening of Morphine in Urine.
Chinese Journal of Analytical Chemistry, 43, (4), 495-501, (2015)
   

Meng LH

Zhang LM et al., Highly Selective Molecularly Imprinted Polymer Sensor for Indium Detection Based on Recognition of In-Alizarin Complexes.
Electroanalysis, 27, (7), 1758-1765, (2015)
   

Meng LZ

Meng LZ et al., Preparation and recognition of dyes molecular imprinting silicone (I).
Journal of Wuhan University (Natural Science Edition), 48, (2), 147-150, (2002)
   

Gong SL et al., Dye-molecular-imprinted polysiloxanes. II. Preparation, characterization, and recognition behavior.
Journal of Applied Polymer Science, 93, (2), 637-643, (2004)
   

Meng M

Liu CB et al., A simple and sensitive surface molecularly imprinted polymers based fluorescence sensor for detection of [lambda]-Cyhalothrin.
Talanta, 125, 14-23, (2014)
   

Meng MJ

He MQ et al., Synthesis and Characterization of Kaempferol Molecularly Imprinted Polymers.
Chemical World, 51, (11), 670-674, (2010)
   

He MQ et al., A new molecularly imprinted polymer prepared by surface imprinting technique for selective adsorption towards kaempferol.
Polymer Bulletin, 68, (4), 1039-1052, (2012)
   

Meng MJ et al., Selective Adsorption of Methylparaben by Submicrosized Molecularly Imprinted Polymer: Batch and Dynamic Flow Mode Studies.
Industrial & Engineering Chemistry Research, 51, (45), 14915-14924, (2012)
   

Guo WL et al., Preparation of ion-imprinted mesoporous silica SBA-15 functionalized with triglycine for selective adsorption of Co(II).
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 436, 693-703, (2013)
   

Liu Y et al., Speciation, adsorption and determination of chromium(III) and chromium(VI) on a mesoporous surface imprinted polymer adsorbent by combining inductively coupled plasma atomic emission spectrometry and UV spectrophotometry.
Journal of Separation Science, 36, (24), 3949-3957, (2013)
   

Meng MJ et al., Optimization of surface imprinted layer attached poly(vinylidene fluoride) membrane for selective separation of salicylic acid from acetylsalicylic acid using central composite design.
Chemical Engineering Journal, 231, 132-145, (2013)
   

Meng MJ et al., Highly efficient adsorption of salicylic acid from aqueous solution by wollastonite-based imprinted adsorbent: A fixed-bed column study.
Chemical Engineering Journal, 225, 331-339, (2013)
   

Pan JM et al., Fabrication and evaluation of temperature responsive molecularly imprinted sorbents based on surface of yeast via surface-initiated AGET ATRP.
Applied Surface Science, 287, 211-217, (2013)
   

Bao LL et al., Selective adsorption and degradation of rhodamine B with modified titanium dioxide photocatalyst.
Journal of Applied Polymer Science, 131, (20), Article No 40890-(2014)
   

Liu Y et al., Synthesis, characterization, and adsorption properties of a Ce(III)-imprinted polymer supported by mesoporous SBA-15 matrix by a surface molecular imprinting technique.
Canadian Journal of Chemistry - Revue Canadienne de Chimie, 92, (3), 257-266, (2014)
   

Meng MJ et al., Introduction of an ordered porous polymer network into a ceramic alumina membrane via non-hydrolytic sol-gel methodology for targeted dynamic separation.
RSC Advances, 4, (73), 38630-38642, (2014)
   

Meng MJ et al., An ion-imprinted functionalized SBA-15 adsorbent synthesized by surface imprinting technique via reversible addition-fragmentation chain transfer polymerization for selective removal of Ce(III) from aqueous solution.
Journal of Hazardous Materials, 278, 134-143, (2014)
   

Meng MJ et al., Preparation, characterization, and adsorption performance of p-hydroxybenzoic acid imprinted polymer and selective catalysis of toluene to para-chlorotoluene.
Journal of Applied Polymer Science, 131, (8), Article No 40118-(2014)
   

Meng MJ et al., Selective separation of salicylic acid from aqueous solutions using molecularly imprinted nano-polymer on wollastonite synthesized by oil-in-water microemulsion method.
Journal of Industrial and Engineering Chemistry, 20, (6), 3975-3983, (2014)
   

Meng MJ et al., Preparation of composite-imprinted alumina membrane for effective separation of p-hydroxybenzonic acid from its isomer using Box-Behnken design-based statistical modeling.
Journal of Applied Polymer Science, 131, (16), Article No 40621-(2014)
   

Wang J et al., Surface molecularly imprinted polymers based on yeast prepared by atom transfer radical emulsion polymerization for selective recognition of ciprofloxacin from aqueous medium.
Journal of Applied Polymer Science, 131, (11), Article No 40310-(2014)
   

Wei X et al., Synthesis of molecularly imprinted silica nanospheres embedded mercaptosuccinic acid-coated CdTe quantum dots for selective recognition of [lambda]-cyhalothrin.
Journal of Luminescence, 153, 326-332, (2014)
   

Wu YL et al., Efficient one-pot synthesis of artemisinin-imprinted membrane by direct surface-initiated AGET-ATRP.
Separation and Purification Technology, 131, 117-125, (2014)
   

Wu YL et al., Fabrication and Evaluation of Artemisinin-Imprinted Composite Membranes by Developing a Surface Functional Monomer-Directing Prepolymerization System.
Langmuir, 30, (49), 14789-14796, (2014)
   

Wu YL et al., Fabrication and evaluation of molecularly imprinted regenerated cellulose composite membranes via atom transfer radical polymerization.
Chinese Chemical Letters, 25, (2), 273-278, (2014)
   

Xie QJ et al., Molecularly imprinted [beta]-cyclodextrin/Kaoline particles for the selective recognition and binding of bisphenol A.
The Canadian Journal of Chemical Engineering, 92, (4), 720-728, (2014)
   

Gao YM et al., A Facile Synthesis of Ion Imprinted Mesoporous Silica Adsorbents by a Co-Condensation Pathway and Application in a Fixed-Bed Column Study for Lead Removal.
Australian Journal of Chemistry, 68, (7), 1051-1064, (2015)
   

He ZH et al., Fabrication of new cellulose acetate blend imprinted membrane assisted with ionic liquid ([BMIM]Cl) for selective adsorption of salicylic acid from industrial wastewater.
Separation and Purification Technology, 145, 63-74, (2015)
   

Liu FF et al., Efficient static and dynamic removal of Sr(II) from aqueous solution using chitosan ion-imprinted polymer functionalized with dithiocarbamate.
Journal of Environmental Chemical Engineering, 3, (2), 1061-1071, (2015)
   

Liu Y et al., Preparation of a Two-Dimensional Ion-Imprinted Polymer Based on a Graphene Oxide/SiO2 Composite for the Selective Adsorption of Nickel Ions.
Langmuir, 31, (32), 8841-8851, (2015)
   

Liu Y et al., Thermal-responsive ion-imprinted polymer based on magnetic mesoporous silica SBA-15 for selective removal of Sr(II) from aqueous solution.
Colloid & Polymer Science, 293, (1), 109-123, (2015)
   

Liu Y et al., Preparation of core-shell ion imprinted nanoparticles via photoinitiated polymerization at ambient temperature for dynamic removal of cobalt in aqueous solution.
RSC Advances, 5, (104), 85691-85704, (2015)
   

Liu Y et al., Synthesis of hydrophilic surface ion-imprinted polymer based on graphene oxide for removal of strontium from aqueous solution.
Journal of Materials Chemistry A, 3, (3), 1287-1297, (2015)
   

Liu ZC et al., Monodisperse magnetic ion imprinted polymeric microparticles prepared by RAFT polymerization based on [gamma]-Fe2O3@meso-SiO2 nanospheres for selective solid-phase extraction of Cu(II) in water samples.
RSC Advances, 5, (65), 52369-52381, (2015)
   

Luo HY et al., Molecularly imprinted open porous membranes made from Pickering W/O HIPEs for selective adsorption and separation of methyl 4-hydroxybenzoate.
Chinese Chemical Letters, 26, (8), 1036-1041, (2015)
   

Meng MJ et al., Fabrication of a novel cellulose acetate imprinted membrane assisted with chitosan-wrapped multi-walled carbon nanotubes for selective separation of salicylic acid from industrial wastewater.
Journal of Applied Polymer Science, 132, (42), ArticleNo42654-(2015)
   

Meng XG et al., Synthesis of novel ion-imprinted polymers by two different RAFT polymerization strategies for the removal of Cs(I) from aqueous solutions.
RSC Advances, 5, (17), 12517-12529, (2015)
   

Pan JM et al., Fabrication and evaluation of molecularly imprinted multi-hollow microspheres adsorbents with tunable inner pore structures derived from templating Pickering double emulsions.
Chemical Engineering Journal, 266, 299-308, (2015)
   

Sun FQ et al., Fabrication of ordered microporous styrene-acrylonitrile copolymer blend imprinted membranes for selective adsorption of phenol from salicylic acid using breath figure method.
Journal of Applied Polymer Science, 132, (31), ArticleNo42350-(2015)
   

Wu Y et al., Accelerating the design of multi-component nanocomposite imprinted membranes by integrating a versatile metal-organic methodology with a mussel-inspired secondary reaction platform.
Green Chemistry, 17, (6), 3338-3349, (2015)
   

Wu YL et al., Bio-inspired adhesion: fabrication and evaluation of molecularly imprinted nanocomposite membranes by developing a "bio-glue" imprinted methodology.
RSC Advances, 5, (57), 46146-46157, (2015)
   

Wu YL et al., Bio-inspired adhesion: Fabrication of molecularly imprinted nanocomposite membranes by developing a hybrid organic-inorganic nanoparticles composite structure.
Journal of Membrane Science, 490, 169-178, (2015)
   

Yu P et al., Magnetic Molecularly Imprinted Polymer Beads Obtained by Suspension Polymerization for the Adsorption of 2, 4, 6-Trichlorophenol from an Aqueous Solution in a Fixed-bed Column.
Adsorption Science & Technology, 33, (3), 321-336, (2015)
   

Cui JY et al., Bio-inspired synthesis of molecularly imprinted nanocomposite membrane for selective recognition and separation of artemisinin.
Journal of Applied Polymer Science, 133, (19), ArticleNo43405-(2016)
   

Liu SC et al., Graphene oxide based molecularly imprinted polymers with double recognition abilities: The combination of covalent boronic acid and traditional non-covalent monomers.
Chemical Engineering Journal, 290, 220-231, (2016)
   

Liu Y et al., Selective separation of phenol from salicylic acid effluent over molecularly imprinted polystyrene nanospheres composite alumina membranes.
Chemical Engineering Journal, 286, 622-631, (2016)
   

Liu Y et al., Synthesis of a Ni(II) ion imprinted polymer based on macroporous-mesoporous silica with enhanced dynamic adsorption capacity: optimization by response surface methodology.
New Journal of Chemistry, 40, (4), 3821-3832, (2016)
   

Liu Y et al., RAFT-mediated microemulsion polymerization to synthesize a novel high-performance graphene oxide-based cadmium imprinted polymer.
Chemical Engineering Journal, 302, 609-618, (2016)
   

Liu Y et al., Selective Ce(III) ion-imprinted polymer grafted on Fe3O4 nanoparticles supported by SBA-15 mesopores microreactor via surface-initiated RAFT polymerization.
Microporous And Mesoporous Materials, 234, 176-185, (2016)
   

Liu Y et al., Facile synthesis of novel photoresponsive mesoporous molecularly imprinted polymers for photo-regulated selective separation of bisphenol A.
Chemical Engineering Journal, 296, 437-446, (2016)
   

Liu Y et al., A modeling study by response surface methodology (RSM) on Sr(II) ion dynamic adsorption optimization using a novel magnetic ion imprinted polymer.
RSC Advances, 6, (60), 54679-54692, (2016)
   

Mao YL et al., Fabrication of highly selective molecularly imprinted membranes for the selective adsorption of methyl salicylate from salicylic acid.
RSC Advances, 6, (94), 91659-91668, (2016)
   

Meng MJ et al., Highly effective surface molecularly imprinted polymer for the solid-phase extraction of dihydroquercetin from Prince's-feather Fruit sample.
Separation Science and Technology, 51, (6), 917-928, (2016)
   

Wu YL et al., A novel approach toward fabrication of porous molecularly imprinted nanocomposites with bioinspired multilevel internal domains: Application to selective adsorption and separation membrane.
Chemical Engineering Journal, 306, 492-503, (2016)
   

Yin YJ et al., Rationally designed hybrid molecularly imprinted polymer foam for highly efficient [lambda]-cyhalothrin recognition and uptake via twice imprinting strategy.
Chemical Engineering Journal, 286, 485-496, (2016)
   

Cui YH et al., Facile synthesis of imprinted submicroparticles blend polyvinylidene fluoride membranes at ambient temperature for selective adsorption of methyl p-hydroxybenzoate.
Korean Journal of Chemical Engineering, 34, (3), 600-608, (2017)
   

Liu Y et al., A molecularly imprinted polymer placed on the surface of graphene oxide and doped with Mn(II)-doped ZnS quantum dots for selective fluorometric determination of acrylamide.
Microchimica Acta, 185, (1), ArticleNo48-(2017)
   

Liu Y et al., A novel dual temperature responsive mesoporous imprinted polymer for Cd(II) adsorption and temperature switchable controlled separation and regeneration.
Chemical Engineering Journal, 328, 11-24, (2017)
   

Meng MJ et al., Fabrication of submicrosized imprinted spheres attached polypropylene membrane using "two-dimensional" molecular imprinting method for targeted separation.
Adsorption Science & Technology, 35, (1-2), 162-177, (2017)
   

Sun DS et al., Fabrication of highly selective ion imprinted macroporous membranes with crown ether for targeted separation of lithium ion.
Separation and Purification Technology, 175, 19-26, (2017)
   

Wu YL et al., Bioinspired synthesis of pDA/SiO2-based porous ciprofloxacin-imprinted nanocomposite membrane by a polydopamine-assisted organic-inorganic method.
Chemical Engineering Journal, 309, 263-271, (2017)
   

Wu YL et al., Bioinspired synthesis of high-performance nanocomposite imprinted membrane by a polydopamine-assisted metal-organic method.
Journal of Hazardous Materials, 323, (Part B), 663-673, (2017)
   

Yu XP et al., Fouling Resistant CA/PVA/TiO2 Imprinted Membranes for Selective Recognition and Separation Salicylic Acid from Waste Water.
Frontiers in Chemistry, 5, ArticleNo2-(2017)
   

Zhao J et al., Molecularly imprinted nanocomposite membranes based on GO/PVDF blended membranes with an organic-inorganic structure for selective separation of norfloxacin.
New Journal of Chemistry, 41, (24), 14966-14976, (2017)
   

Gao J et al., Bioinspired synthesis of multi-walled carbon nanotubes based enoxacin-imprinted nanocomposite membranes with excellent antifouling and selective separation properties.
Journal of the Taiwan Institute of Chemical Engineers, 91, 468-480, (2018)
   

Sun DS et al., Synthesis of ion imprinted nanocomposite membranes for selective adsorption of lithium.
Separation and Purification Technology, 194, 64-72, (2018)
   

Wu YL et al., Bioinspired synthesis of SiO2/pDA-based nanocomposite-imprinted membranes with sol-gel imprinted layers for selective adsorption and separation applications.
Physical Chemistry Chemical Physics, 20, (23), 15775-15783, (2018)
   

Wu YL et al., Bioinspired Synthesis of Janus Nanocomposite-Incorporated Molecularly Imprinted Membranes for Selective Adsorption and Separation Applications.
ACS Sustainable Chemistry & Engineering, 6, (7), 9104-9112, (2018)
   

Gao J et al., One pot-economical fabrication of molecularly imprinted membrane employing carbon nanospheres sol coagulation bath with specific separation and advanced antifouling performances.
Separation and Purification Technology, 218, 59-69, (2019)
   

Lu J et al., Antibacterial, high-flux and 3D porous molecularly imprinted nanocomposite sponge membranes for cross-flow filtration of emodin from analogues.
Chemical Engineering Journal, 360, 483-493, (2019)
   

Meng MJ et al., Selective recognition of salicylic acid employing new fluorescent imprinted membrane functionalized with poly(amidoamine) (PAMAM)-encapsulated Eu(TTA)3phen.
Journal of Luminescence, 208, 24-32, (2019)
   

Wu YL et al., Fabrication and evaluation of GO/TiO2-based molecularly imprinted nanocomposite membranes by developing a reformative filtering strategy: Application to selective adsorption and separation membrane.
Separation and Purification Technology, 212, 245-254, (2019)
   

Dong ZQ et al., Antifouling molecularly imprinted membranes for pretreatment of milk samples: Selective separation and detection of lincomycin.
Food Chemistry, 333, Article127477-(2020)
   

Xu YQ et al., Fluorescent polydopamine based molecularly imprinted sensor for ultrafast and selective detection of p-nitrophenol in drinking water.
Microchimica Acta, 189, (1), Article25-(2021)
   

Chen MN et al., Design of self-cleaning molecularly imprinted membrane with antibacterial ability for high-selectively separation of ribavirin.
Journal of Membrane Science, 642, Article119994-(2022)
   

Xu YQ et al., Molecularly imprinted polydopamine coated CdTe@SiO2 as a ratiometric fluorescent probe for ultrafast and visual p-nitrophenol monitoring.
Microchemical Journal, 172, Article106899-(2022)
   

Xu YQ et al., SiO2-coated molecularly imprinted sensor based on Si quantum dots for selective detection of catechol in river water.
Journal of Environmental Chemical Engineering, 10, (1), Article106850-(2022)
   

Yu C et al., Tailor-made double-face imprinted membrane with ultra-high specific surface area asymmetric structure through a connective method of dip-coating and delayed phase inversion for selective adsorption of cadmium ion.
Separation and Purification Technology, 280, Article119865-(2022)
   

Meng PJ

Meng L et al., Fast screening of ketamine in biological samples based on molecularly imprinted photonic hydrogels.
Analytica Chimica Acta, 771, 86-94, (2013)
   

Meng L et al., Molecularly imprinted photonic hydrogels for fast screening of atropine in biological samples with high sensitivity.
Forensic Science International, 231, (1-3), 6-12, (2013)
   

Meng L et al., Water-compatible Molecularly Imprinted Photonic Hydrogels for Fast Screening of Morphine in Urine.
Chinese Journal of Analytical Chemistry, 43, (4), 495-501, (2015)
   

Meng PR

Wang XH et al., Preparation and Application of Molecularly Imprinted Polymers.
Shanghai Plastics, (3), 1-4, (2011)
   

Wang XH et al., Preparation and characterization of the luteolin molecular imprinted polymer.
China Synthetic Resin and Plastics, 29, (4), 25-29, (2012)
   

Meng PR, Proceeding, Luteolin Imprinted Polymer with Selective Recognition and Adsorption Performance, 
Zhao GM, Chen LX, Tang Y, He L, Long B, Nie ZY, Chen HH (Eds.), 297-301, (2014)
   

Meng Q

Liu PX et al., Study on preparation and characters of BPA molecular imprinting adsorbent.
Material Science and Technology, 20, (1), 98-102, (2012)
   

Meng QH

Yang YJ et al., Constructing synergistic groups in porous aromatic frameworks for the selective removal and recovery of lead(ii) ions.
Journal of Materials Chemistry A, 6, (12), 5202-5207, (2018)
   

Yuan Y et al., Molecularly Imprinted Porous Aromatic Frameworks and Their Composite Components for Selective Extraction of Uranium Ions.
Advanced Materials, 30, (12), ArticleNo1706507-(2018)
   

Yuan Y et al., Molecularly Imprinted Porous Aromatic Frameworks Serving as Porous Artificial Enzymes.
Advanced Materials, 30, (27), 1800069-(2018)
   

Meng QQ

Deng HN et al., A Novel Surface Ion-Imprinted Cation-Exchange Membrane for Selective Separation of Copper Ion.
Industrial & Engineering Chemistry Research, 53, (39), 15230-15236, (2014)
   

Meng QR

Fan HR et al., Preparation of Photoirradiation Molecular Imprinting Polymer for Selective Separation of Branched Cyclodextrins.
Molecules, 22, (2), ArticleNo288-(2017)
   

Fan HR et al., Photoirradiation surface molecularly imprinted polymers for the separation of 6-O-[alpha]-d-maltosyl-[beta]-cyclodextrin.
Journal of Separation Science, 40, (23), 4653-4660, (2017)
   

Fan HR et al., Monodisperse hollow-shell structured molecularly imprinted polymers for photocontrolled extraction [alpha]-cyclodextrin from complex samples.
Food Chemistry, 281, 1-7, (2019)
   

Meng QX

Qu XJ et al., Recognition of 6-benzyladenine using a molecularly imprinted membrane on a cellulose acetate support.
Journal of Analytical Chemistry, 63, (10), 999-1004, (2008)
   

Meng SC

Li X et al., Impedimetric Enzyme-Free Detection of Glucose via a Computation-Designed Molecularly Imprinted Electrochemical Sensor Fabricated on Porous Ni Foam.
Electroanalysis, 29, (5), 1243-1251, (2017)
   

Wu HY et al., A comprehensive theoretical study of structural optimization, interaction energies calculations and solvent effects between ractopamine and functional monomers in molecular imprinting polymers.
Polymer Bulletin, 75, (5), 1981-1996, (2018)
   

Meng SM

Liu YW et al., Solid-phase extraction and preconcentration of cadmium(II) in aqueous solution with Cd(II)-imprinted resin (poly-Cd(II)-DAAB-VP) packed columns.
Analytica Chimica Acta, 519, (2), 173-179, (2004)
   

Liu YW et al., Highly selective determination of inorganic mercury(II) after preconcentration with Hg(II)-imprinted diazoaminobenzene-vinylpyridine copolymers.
Analytica Chimica Acta, 538, (1-2), 85-91, (2005)
   

Liu YW et al., Highly selective determination of methylmercury with methylmercury-imprinted polymers.
Analytica Chimica Acta, 575, (2), 159-165, (2006)
   

Meng SM et al., Spectrophotometric determination of trace cadmium in vegetables with 3, 5-bis(4-phenylazophenylaminodiazo)benzoic acid.
Journal of Analytical Chemistry, 66, (1), 31-36, (2011)
   

Meng SQ

Gao BJ et al., Designing and preparation of ferulic acid surface-imprinted material and its molecular recognition characteristics.
RSC Advances, 6, (5), 3986-3996, (2016)
   

Meng T

Wei MH et al., Preparation and Characterization of Dual-Template Molecularly Imprinted Membrane with High Flux Based on Blending the Inorganic Nanoparticles.
Journal of Inorganic and Organometallic Polymers and Materials, 28, (1), 295-307, (2018)
   

Meng TT

Yan CL et al., Selective Recognition of Ciprofloxacin Hydrochloride Based on Molecular Imprinted Sensor via Electrochemical Copolymerization of Pyrrole and o-phenylenediamine.
International Journal of Electrochemical Science, 11, 6466-6476-(2016)
   

Meng WJ

Lou ZL et al., Application of Molecular Imprinting Technology to Enzyme Mimics and Molecular Reaction Vessels.
Chinese Journal of Organic Chemistry, 29, (11), 1744-1749, (2009)
   

Meng X

Meng X et al., A molecularly imprinted electrochemical sensor based on gold nanoparticles and multiwalled carbon nanotube-chitosan for the detection of tryptamine.
RSC Advances, 4, (73), 38649-38654, (2014)
   

Meng XG

Guo WL et al., Preparation of ion-imprinted mesoporous silica SBA-15 functionalized with triglycine for selective adsorption of Co(II).
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 436, 693-703, (2013)
   

Liu Y et al., Speciation, adsorption and determination of chromium(III) and chromium(VI) on a mesoporous surface imprinted polymer adsorbent by combining inductively coupled plasma atomic emission spectrometry and UV spectrophotometry.
Journal of Separation Science, 36, (24), 3949-3957, (2013)
   

Liu Y et al., Synthesis, characterization, and adsorption properties of a Ce(III)-imprinted polymer supported by mesoporous SBA-15 matrix by a surface molecular imprinting technique.
Canadian Journal of Chemistry - Revue Canadienne de Chimie, 92, (3), 257-266, (2014)
   

Meng MJ et al., An ion-imprinted functionalized SBA-15 adsorbent synthesized by surface imprinting technique via reversible addition-fragmentation chain transfer polymerization for selective removal of Ce(III) from aqueous solution.
Journal of Hazardous Materials, 278, 134-143, (2014)
   

Meng XG et al., Proceeding, Synthesis of Ni(II)-imprinted Mesoporous Silica Adsorbents by Surface Imprinting Technology for Removal of Ni(II) from Aqueous Solution, 
Kao CM, Sung WP, Chen R (Eds.), 146-149, (2014)
   

Gao YM et al., A Facile Synthesis of Ion Imprinted Mesoporous Silica Adsorbents by a Co-Condensation Pathway and Application in a Fixed-Bed Column Study for Lead Removal.
Australian Journal of Chemistry, 68, (7), 1051-1064, (2015)
   

Liu FF et al., Efficient static and dynamic removal of Sr(II) from aqueous solution using chitosan ion-imprinted polymer functionalized with dithiocarbamate.
Journal of Environmental Chemical Engineering, 3, (2), 1061-1071, (2015)
   

Liu Y et al., Preparation of a Two-Dimensional Ion-Imprinted Polymer Based on a Graphene Oxide/SiO2 Composite for the Selective Adsorption of Nickel Ions.
Langmuir, 31, (32), 8841-8851, (2015)
   

Liu Y et al., Thermal-responsive ion-imprinted polymer based on magnetic mesoporous silica SBA-15 for selective removal of Sr(II) from aqueous solution.
Colloid & Polymer Science, 293, (1), 109-123, (2015)
   

Liu Y et al., Synthesis of hydrophilic surface ion-imprinted polymer based on graphene oxide for removal of strontium from aqueous solution.
Journal of Materials Chemistry A, 3, (3), 1287-1297, (2015)
   

Liu ZC et al., Monodisperse magnetic ion imprinted polymeric microparticles prepared by RAFT polymerization based on [gamma]-Fe2O3@meso-SiO2 nanospheres for selective solid-phase extraction of Cu(II) in water samples.
RSC Advances, 5, (65), 52369-52381, (2015)
   

Meng XG et al., Synthesis of novel ion-imprinted polymers by two different RAFT polymerization strategies for the removal of Cs(I) from aqueous solutions.
RSC Advances, 5, (17), 12517-12529, (2015)
   

Liu Y et al., Tailor-made ion-imprinted polymer based on functionalized graphene oxide for the preconcentration and determination of trace copper in food samples.
Journal of Separation Science, 39, (7), 1371-1378, (2016)
   

Liu Y et al., RAFT-mediated microemulsion polymerization to synthesize a novel high-performance graphene oxide-based cadmium imprinted polymer.
Chemical Engineering Journal, 302, 609-618, (2016)
   

Liu Y et al., A modeling study by response surface methodology (RSM) on Sr(II) ion dynamic adsorption optimization using a novel magnetic ion imprinted polymer.
RSC Advances, 6, (60), 54679-54692, (2016)
   

Meng XH

Liu BJ et al., Removal of Pb(II) from aqueous solution using dithiocarbamate modified chitosan beads with Pb(II) as imprinted ions.
Chemical Engineering Journal, 220, 412-419, (2013)
   

Liu BJ et al., Adsorption of heavy metal ions, dyes and proteins by chitosan composites and derivatives - A review.
Journal of Ocean University of China, 12, (3), 500-508, (2013)
   

Liu BJ et al., Biosorption of lead from aqueous solutions by ion-imprinted tetraethylenepentamine modified chitosan beads.
International Journal of Biological Macromolecules, 86, 562-569, (2016)
   

Meng XJ

Zhang TL et al., Molecular Recognition Properties of p-Phenylenediamine-Imprinted Polymers.
Chinese Journal of Analytical Chemistry, 38, (1), 33-38, (2010)
   

Meng XJ et al., Proceeding, Molecularly Imprinted Polymers-Based Electrochemical Sensor for Detection of Nitrocellulose, 
Woodley C, Cullis I (Eds.), 705-708, (2016)
   

Li M et al., A novel In(III) ion-imprinted polymer (IIP) for selective extraction of In(III) ions from aqueous solutions.
Hydrometallurgy, 176, 243-252, (2018)
   

Yang Y et al., Synthesis of a surface molecular imprinting polymer based on silica and its application in the identification of nitrocellulose.
RSC Advances, 8, (18), 9802-9811, (2018)
   

Meng XJ et al., Preparation of an Electrochemical Sensor Based on Surface Molecularly Imprinted Polymers Modified Electrode and its Application in Detection of Nitrocellulose.
Propellants, Explosives, Pyrotechnics, 44, (7), 807-815, (2019)
   

Tan F et al., Hybrid peptide-molecularly imprinted polymer interface for electrochemical detection of vancomycin in complex matrices.
Biosensors and Bioelectronics, 184, Article113220-(2021)
   

Meng XX

Du ZF et al., Technology and application progress of thermosensitive molecularly imprinted polymer.
Modern Chemical Industry, 35, (11), 27-31, (2015)
   

Xu XW et al., A molecularly imprinted polymer for the selective solid-phase extraction of dimethomorph from ginseng samples.
Journal of Chromatography B, 988, 182-186, (2015)
   

Meng XY

Wang XN et al., One-step synthesis of mussel-inspired molecularly imprinted magnetic polymer as stationary phase for chip-based open tubular capillary electrochromatography enantioseparation.
Journal of Chromatography A, 1362, 301-308, (2014)
   

Zhao C et al., Fluorescence Magnetic Surface Molecularly Imprinted Polymer Nanospheres to Detect Naringin by Fluorescence Polarization.
Food Science, 38, (18), 150-155, (2017)
   

Zhao C et al., Using chiral magnetic surface molecularly imprinted polymers for chiral separation of gossypol.
SCIREA Journal of Chemistry, 4, (4), 113-123, (2019)
   

Yuan J et al., Probing the molecular basis for sulfonamides recognition in surface molecularly imprinted polymers using computational and experimental approaches.
Reactive and Functional Polymers, 170, Article105105-(2022)
   

Meng Y

Hu C et al., Preparation and adsorption properties of IIP-PMAA/SiO2 iron ion imprinted material.
Journal of Functional Materials, 49, (3), 3087-3091, (2018)
   

Meng YA

Shi XZ et al., Group-selective molecularly imprinted polymer solid-phase extraction for the simultaneous determination of six sulfonamides in aquaculture products.
Journal of Chromatography B, 879, (15-16), 1071-1076, (2011)
   

Meng YJ

Tong PH et al., Molecularly imprinted electrochemical luminescence sensor based on core-shell magnetic particles with ZIF-8 imprinted material.
Sensors and Actuators B: Chemical, 330, Article129405-(2021)
   

Meng YN

Wang HH et al., ZnO nanotubes supported molecularly imprinted polymers arrays as sensing materials for electrochemical detection of dopamine.
Talanta, 176, 573-581, (2018)
   

Meng Z

Yamazaki T et al., A novel amperometric sensor for organophosphotriester insecticides detection employing catalytic polymer mimicking phosphotriesterase catalytic center.
Electrochemistry, 69, (12), 969-972, (2001)
   

Meng ZH

Meng ZH et al., Application of molecular imprinting in chiral separation.
Chinese Journal of Analytical Chemistry, 25, (3), 349-354, (1997)
   

Meng ZH et al., Molecular imprinting of (R)-(+)-a-methylbenzylamine for chiral stationary phase.
Chinese Chemical Letters, 8, 345-346, (1997)
   

Meng ZH et al., Combined interaction in molecule imprinting chiral stationary phase.
Chinese Journal of Analytical Chemistry, 26, (10), 1251-1253, (1998)
   

Meng ZH et al., New cocktail functional monomers in making molecule imprinting polymer with high chiral selectivity.
Progress in Natural Science, 9, (10), 792-795, (1999)
   

Meng ZH et al., Molecule imprinting chiral stationary phase.
Biomedical Chromatography, 13, (6), 389-393, (1999)
   

Meng ZH et al., High performance cocktail functional monomer for making molecule imprinting polymer.
Analytical Sciences, 15, (2), 141-144, (1999)
   

Meng ZH et al., Beaded molecule imprinted polymer for stereo isomer separation.
Chinese Journal of Chromatography, 17, (4), 323-325, (1999)
   

Meng ZH et al., Making high selective molecule imprinting polymer (MIP) in polar solvent.
Chinese Chemical Letters, 10, (1), 69-72, (1999)
   

Meng ZH et al., Progress of Molecule Imprinting Technique.
Progress In Chemistry, 11, (4), 358-366, (1999)
   

Wang JF et al., Effect of rigidity of the imprinted molecule to chiral separation of molecular imprinting chiral stationary phase.
Chinese Journal of Analytical Chemistry, 27, (12), 1420-1423, (1999)
   

Wang JF et al., Highly efficient molecule imprinting chiral stationary phase utilizing combined basic functional monomers.
Acta Chimica Sinica, 57, (10), 1147-1151, (1999)
   

Meng ZH et al., The research of adsorption of organophosphorus toxicants on molecule imprinting polymers.
Chinese Journal of Analytical Chemistry, 28, (4), 432-435, (2000)
   

Meng ZH et al., The structure characterization for molecule imprinting polymers and the thermodynamic study in the chiral separation process.
Chinese Journal of Analytical Chemistry, 28, (8), 1017-1020, (2000)
   

Meng ZH et al., Beaded molecule imprinted polymer for stereo isomer separation.
Chromatography, 21, (3), 217-219, (2000)
   

Liu Q et al., Determination of nerve agent degradation products in rice by molecule imprinting polymer-solid phase extraction and capillary electrophoresis.
Chinese Journal of Analytical Chemistry, 29, (4), 387-390, (2001)
   

Meng ZH et al., Determination of degradation products of nerve agents human serum by solid phase extraction using molecularly imprinted polymer.
Analytica Chimica Acta, 435, (1), 121-127, (2001)
   

Cederfur J et al., Synthesis and screening of a molecularly imprinted polymer library targeted for penicillin G.
Journal of Combinatorial Chemistry, 5, (1), 67-72, (2003)
   

Meng ZH et al., Enhancement of the catalytic activity of an artificial phosphotriesterase using a molecular imprinting technique.
Biotechnology Letters, 25, (13), 1075-1080, (2003)
   

Meng ZH et al., A molecularly imprinted catalyst designed by a computational approach in catalysing a transesterification process.
Biosensors and Bioelectronics, 20, (6), 1068-1075, (2004)
   

Meng ZH et al., Removal of estrogenic pollutants from contaminated water using molecularly imprinted polymers.
Environmental Science & Technology, 39, (22), 8958-8962, (2005)
   

Meng ZH et al., The molecular reaction vessels for a transesterification process created by molecular imprinting technique.
Journal of Molecular Recognition, 18, (3), 262-266, (2005)
   

Meng ZH et al., Construction of artificial cyclic amide amidohydrolases using molecular imprinting technique.
Biotechnology Letters, 27, (7), 471-475, (2005)
   

Mulchandani A et al., Removal of estrogenic pollutants using synthetic endocrine disruptor receptor created by the molecular imprinting technique.
Abstracts of Papers of the American Chemical Society, 229, (ENVR), 026-026, (2005)
   

Meng ZH et al., Application of Molecularly Imprinted Solid Phase Extraction in the Assay of Environmental Samples.
Chinese Journal of Chromatography, 24, (6), 551-554, (2006)
   

Zhang QY et al., Absorption of TNT by Molecularly Imprinted Polymer.
Chinese Journal of Explosives & Propellants, 30, (1), 64-66, (2007)
   

Lou ZL et al., Application of Molecular Imprinting Technology to Enzyme Mimics and Molecular Reaction Vessels.
Chinese Journal of Organic Chemistry, 29, (11), 1744-1749, (2009)
   

Zhang QY et al., Adsorption of TNT using beaded molecularly-imprinted polymer.
Chinese Journal of Energetic Materials, 17, (2), 249-250, (2009)
   

Zhou YY et al., Application of molecular imprinting technology in the separation and purification of active ingredients from natural products.
Chinese Journal of Chromatography, 27, (3), 359-363, (2009)
   

Li M et al., Molecularly-imprinted microspheres for selective extraction and determination of melamine in milk and feed using gas chromatography-mass spectrometry.
Journal of Chromatography B, 878, (25), 2333-2338, (2010)
   

Yin JF et al., Pseudo-template molecularly imprinted polymer for selective screening of trace [beta]-lactam antibiotics in river and tap water.
Journal of Chromatography A, 1217, (33), 5420-5426, (2010)
   

Xue F et al., Molecularly Imprinted Photonic Crystal for Detection of Glucose.
Chinese Journal of Analytical Chemistry, 39, (7), 1015-1020, (2011)
   

Xue M et al., Application of Molecularly Imprinted Solid Phase Extraction for Determination of Estrogens in River Water, Milk and Urine Samples.
Chinese Journal of Analytical Chemistry, 39, (6), 793-798, (2011)
   

Yin JF et al., Dummy molecularly imprinted polymer for selective screening of trace bisphenols in river water.
Analytical Methods, 3, (1), 173-180, (2011)
   

Lei W et al., ''Induced fit'' recognition of proteins by surface imprinted silica with ''soft'' recognition sites.
Talanta, 99, 966-971, (2012)
   

Liu F et al., Preparation of Molecularly Imprinted Photonic Crystal Sensor of Ethyl Phosphonate.
Chinese Journal of Analytical Chemistry, 40, (8), 1153-1158, (2012)
   

Liu F et al., Detection of organophosphorus compounds using a molecularly imprinted photonic crystal.
Biosensors and Bioelectronics, 32, (1), 273-277, (2012)
   

Lu W et al., Molecularly Imprinted Colloidal Array for Detection of Explosives.
Chinese Journal of Analytical Chemistry, 40, (10), 1561-1566, (2012)
   

Meng ZH, Book chapter, Molecularly Imprinted Sol-Gel Sensors, 
In: Molecularly Imprinted Sensors, Li SJ, Ge Y, Piletsky SA, Lunec J (Eds.) Elsevier: Amsterdam, Ch. 13, 303-337, (2012)
   

Meng ZH et al., Removal of 2, 4, 6-Trinitrotoluene from 'Pink Water' Using Molecularly-Imprinted Absorbent.
Propellants, Explosives, Pyrotechnics, 37, (1), 100-106, (2012)
   

Xue F et al., Detection of p-Nitrophenol Using Molecularly Imprinted Colloidal Array.
Chinese Journal of Analytical Chemistry, 40, (2), 218-223, (2012)
   

Lei W et al., Preparation of surface-imprinted silica using metal coordination for the separation of proteins.
Journal of Liquid Chromatography & Related Technologies, 36, (15), 2196-2207, (2013)
   

Wang L et al., Selective Extraction of N-Heterocyclic Precursors of 1, 3, 5, 7-Tetranitro-1, 3, 5, 7-tetraazacyclooctane (HMX) Using Molecularly Imprinted Polymers.
Propellants, Explosives, Pyrotechnics, 38, (6), 781-785, (2013)
   

Xue F et al., A covalently imprinted photonic crystal for glucose sensing.
Journal of Nanomaterials, 2013, Article ID 530701-(2013)
   

Xue M et al., Extraction of shikimic acid from chinese star anise using flash column chromatography on a molecularly-imprinted polymer column.
Journal of Liquid Chromatography & Related Technologies, 36, (19), 2677-2686, (2013)
   

Chen W et al., Protein recognition by a surface imprinted colloidal array.
Journal of Materials Chemistry A, 2, (20), 7165-7169, (2014)
   

Lu W et al., Detection of nitrobenzene compounds in surface water by ion mobility spectrometry coupled with molecularly imprinted polymers.
Journal of Hazardous Materials, 280, 588-594, (2014)
   

Wu SY et al., Separation of Cyclotetramethylenetetranitramine Synthetic Intermediates by Online Molecular Imprinted Solid Phase Extraction and Liquid Chromatography.
Chinese Journal of Analytical Chemistry, 42, (12), 1767-1772, (2014)
   

Xue F et al., A molecularly imprinted colloidal array as a colorimetric sensor for label-free detection of p-nitrophenol.
Analytical Methods, 6, (3), 831-837, (2014)
   

Chen W et al., Molecularly Imprinted Polymers with Stimuli-Responsive Affinity: Progress and Perspectives.
Polymers, 7, (9), 1689-1715, (2015)
   

Chen W et al., Molecularly imprinted hollow sphere array for the sensing of proteins.
Journal of Biophotonics, 8, (10), 838-845, (2015)
   

Chen W et al., Molecularly imprinted hollow spheres for the solid phase extraction of estrogens.
Talanta, 140, 68-72, (2015)
   

Lu W et al., Molecularly Imprinted Polymers for the Sensing of Explosives and Chemical Warfare Agents.
Current Organic Chemistry, 19, (1), 62-71, (2015)
   

Xue M et al., Determination of trichlorfon in samples of spicy vegetables using a molecularly imprinted solid-phase extraction technique.
Analytical Methods, 7, (6), 2420-2424, (2015)
   

Chen W et al., Molecular imprinted photonic crystal for sensing of biomolecules.
Molecular Imprinting, 4, (1), 1-12, (2016)
   

Jia H et al., Anti-diabetic Drugs Detection by Raman Spectrometry with Molecular Imprinted Composite Membrane.
Chemical Journal of Chinese Universities, 37, (2), 239-245, (2016)
   

Lu W et al., Visual detection of 2, 4, 6-trinitrotolune by molecularly imprinted colloidal array photonic crystal.
Journal of Hazardous Materials, 316, 87-93, (2016)
   

Ma XQ et al., Solanesol extraction from tobacco leaves by Flash chromatography based on molecularly imprinted polymers.
Journal of Chromatography B, 1020, 1-5, (2016)
   

Wang J et al., Understanding the relationships between molecule structure and imprinting effect of two acetyl-nitrogen heterocyclic compounds.
Journal of Molecular Recognition, 29, (6), 260-265, (2016)
   

Wang J et al., Application of molecularly imprinted polymers for the solid-phase extraction of hexanitrohexaazaisowurtzitane (CL-20) from soil samples.
Analytical Methods, 8, (22), 4413-4420, (2016)
   

Lu W et al., Colorimetric sensor arrays based on pattern recognition for the detection of nitroaromatic molecules.
Journal of Hazardous Materials, 326, 130-137, (2017)
   

Wang J et al., Simultaneous selective extraction of nitramine explosives using molecularly imprinted polymer hollow spheres from post blast samples.
New Journal of Chemistry, 41, (3), 1129-1136, (2017)
   

Wang J et al., Separation of 1, 3, 5, 7-tetranitro-1, 3, 5, 7-tetraazacyclooctane and 1, 3, 5-trinitro-1, 3, 5- triazacyclohexane by molecularly imprinted solid-phase extraction.
Journal of Separation Science, 40, (5), 1201-1208, (2017)
   

Guan QJ et al., Determination of methamidophos in spiked ginger using molecularly imprinted technique.
Journal of Food Safety and Quality, 9, (10), 2356-2361, (2018)
   

Wang YF et al., Fabrication of an antibiotic-sensitive 2D-molecularly imprinted photonic crystal.
Analytical Methods, 11, (22), 2875-2879, (2019)
   

Wang YF et al., Fast screening of antibiotics in milk using a molecularly imprinted two-dimensional photonic crystal hydrogel sensor.
Analytica Chimica Acta, 1070, 97-103, (2019)
   

Fan J et al., Colorimetric screening of nitramine explosives by molecularly imprinted photonic crystal array.
Microchemical Journal, 158, Article105143-(2020)
   

Rizvi AS et al., Development of Molecularly Imprinted 2D Photonic Crystal Hydrogel Sensor for Detection of L-Kynurenine in Human Serum.
Talanta, 208, Article120403-(2020)
   

Fan J et al., Rapid self-assembly preparation of p-nitrophenol-molecular imprinted photonic crystal sensors.
Microchemical Journal, 164, Article105950-(2021)
   

Menger M

Menger M et al., MIPs and Aptamers for Recognition of Proteins in Biomimetic Sensing.
Biosensors, 6, (3), ArticleNo35-(2016)
   

Mengíbar M

Aranaz I et al., Functional characterization of chitin and chitosan.
Current Chemical Biology, 3, (2), 203-230, (2009)
   

Menon S

Menon S et al., A voltammetric sensor for acetaminophen based on electropolymerized-molecularly imprinted poly(o-aminophenol) modified gold electrode.
Talanta, 179, 668-675, (2018)
   

Menéndez JC

Martin MA et al., Trends in the design and application of optical chemosensors in pharmaceutical and biomedical analysis.
Current Pharmaceutical Analysis, 4, (3), 106-117, (2008)
   

Menéndez MI

Diñeiro Y et al., Computational approach to the rational design of molecularly imprinted polymers for voltammetric sensing of homovanillic acid.
Analytical Chemistry, 77, (20), 6741-6746, (2005)
   

Diñeiro Y et al., Computational predictions and experimental affinity distributions for a homovanillic acid molecularly imprinted polymer.
Biosensors and Bioelectronics, 22, (3), 364-371, (2006)
   

Díaz-Díaz G et al., Molecularly imprinted catalytic polymers with biomimetic chloroperoxidase activity.
Polymer, 52, (12), 2468-2473, (2011)
   

Meouche W

Meouche W et al., Inverse Suspension Polymerization as a New Tool for the Synthesis of Ion-Imprinted Polymers.
Macromolecular Rapid Communications, 33, (10), 928-932, (2012)
   

Nicolescu TV et al., Tailor-made polymer beads for gallic acid recognition and separation.
Journal of Polymer Research, 19, (12), Article No. 2-(2012)
   

Branger C et al., Recent advances on ion-imprinted polymers.
Reactive and Functional Polymers, 73, (6), 859-875, (2013)
   

Dima SO et al., Diosgenin-selective molecularly imprinted pearls prepared by wet phase inversion.
Reactive and Functional Polymers, 73, (9), 1188-1197, (2013)
   

Nicolescu TV et al., A new microemulsion approach for producing molecularly imprinted polymers with selective recognition cavities for gallic acid.
Polymer International, 62, (6), 949-956, (2013)
   

Dima SO et al., Thermal analyses as tools for proving the molecular imprinting with diosgenin and sclareol in acrylic copolymer matrices.
Journal of Thermal Analysis and Calorimetry, 120, (2), 1107-1118, (2015)
   

Lenoble V et al., Assessment and modelling of Ni(II) retention by an ion-imprinted polymer: Application in natural samples.
Journal of Colloid and Interface Science, 448, 473-481, (2015)
   

Meouche W et al., Effect of porogen solvent on the properties of nickel ion imprinted polymer materials prepared by inverse suspension polymerization.
European Polymer Journal, 87, 124-135, (2017)
   

Mercado C

Mercado C et al., Imprinted polymers for the removal of hydrophobic compounds from wastewater.
Abstracts of Papers of the American Chemical Society, 235, (ENVR), 18-(2008)
   

Ashraf SA et al., Book chapter, Imprinted Polymers for the Removal of Hydrophilic and Hydrophobic Metal Complexes, 
In: New Membranes and Advanced Materials for Wastewater Treatment, Mueller A, Guieysse B, Sarkar A (Eds.) American Chemical Society: Washington DC, Ch. 4, 53-70, (2009)
   

Ashraf S et al., Imprinted polymers for the removal of heavy metal ions from water.
Water Science And Technology, 64, (6), 1325-1332, (2011)
   

Mercante LA

Zamora-Gálvez A et al., Molecularly Imprinted Polymer-Decorated Magnetite Nanoparticles for Selective Sulfonamide Detection.
Analytical Chemistry, 88, (7), 3578-3584, (2016)
   

Mercorio R

Ruggieri F et al., Development of molecularly imprinted polymeric nanofibers by electrospinning and applications to pesticide adsorption.
Journal of Separation Science, 38, (8), 1402-1410, (2015)
   

Merdas SM

Merdas SM, Molecular Imprinting: Fundamentals and Applications.
University of Thi-Qar Journal, 16, (2), 19-51, (2021)
   

Meredith JC

Meredith JC et al., Book chapter, Combinatorial Polymer Science: Synthesis and Characterization, 
In: Combinatorial Materials Development, Malhotra R (Ed.) American Chemical Society: Washington, DC, Ch. 2, 23-47, (2002)
   

Mergola L

Scorrano S et al., Synthesis of Molecularly Imprinted Polymers for Amino Acid Derivates by Using Different Functional Monomers.
International Journal of Molecular Sciences, 12, (3), 1735-1743, (2011)
   

Vasapollo G et al., Molecularly Imprinted Polymers: Present and Future Prospective.
International Journal of Molecular Sciences, 12, (9), 5908-5945, (2011)
   

del Sole R et al., A molecularly imprinted polymer for the determination of neopterin.
Microchimica Acta, 180, (15-16), 1401-1409, (2013)
   

Mergola L et al., Developments in the synthesis of a water compatible molecularly imprinted polymer as artificial receptor for detection of 3-nitro-l-tyrosine in neurological diseases.
Biosensors and Bioelectronics, 40, (1), 336-341, (2013)
   

Scorrano S et al., A molecularly imprinted polymer as artificial receptor for the detection of indole-3-carbinol.
Journal of Applied Polymer Science, 131, (19), Article No 40819-(2014)
   

Scorrano S et al., Molecularly Imprinted Composite Membranes for Selective Detection of 2-Deoxyadenosine in Urine Samples.
International Journal of Molecular Sciences, 16, (6), 13746-13759, (2015)
   

Mergola L et al., Novel polymeric sorbents based on imprinted Hg(II)-diphenylcarbazone complexes for mercury removal from drinking water.
Polymer Journal, 48, 73-79, (2016)
   

Di Bello MP et al., Towards a new strategy of a chitosan-based molecularly imprinted membrane for removal of 4-nitrophenol in real water samples.
Polymer International, 66, (7), 1055-1063, (2017)
   

Di Bello PM et al., A New Ion-Imprinted Chitosan-Based Membrane with an Azo-Derivative Ligand for the Efficient Removal of Pd(II).
Materials, 10, (10), ArticleNo1133-(2017)
   

Mergola L et al., Urinary l-kynurenine quantification and selective extraction through a molecularly imprinted solid-phase extraction device.
Journal of Separation Science, 41, (16), 3204-3212, (2018)
   

Atayat A et al., Response surface methodology approach for the preparation of a molecularly imprinted polymer for solid-phase extraction of fenoxycarb pesticide in mussels.
Journal of Separation Science, 42, (18), 3023-3032, (2019)
   

Meriem F

Niu MC et al., A simple extraction method for norfloxacin from pharmaceutical wastewater with a magnetic core-shell molecularly imprinted polymer with the aid of computer simulation.
New Journal of Chemistry, 41, (7), 2614-2624, (2017)
   

Merino ER

Urraca JL et al., Molecularly imprinted polymers with a streamlined mimic for zearalenone analysis.
Journal of Chromatography A, 1116, (1-2), 127-134, (2006)
   

Merino S

Khan MAR et al., Artificial receptors for the electrochemical detection of bacterial flagellar filaments from Proteus mirabilis.
Sensors and Actuators B: Chemical, 244, 732-741, (2017)
   

Merkoçi A

Merkoçi A et al., New materials for electrochemical sensing - IV. Molecular imprinted polymers.
TrAC Trends in Analytical Chemistry, 21, (11), 717-725, (2002)
   

Aragay G et al., Nanomaterials for Sensing and Destroying Pesticides.
Chemical Reviews, 112, (10), 5317-5338, (2012)
   

Zor E et al., Graphene Quantum Dots-based Photoluminescent Sensor: A Multifunctional Composite for Pesticide Detection.
ACS Applied Materials & Interfaces, 7, (36), 20272-20279, (2015)
   

Zamora-Gálvez A et al., Molecularly Imprinted Polymer-Decorated Magnetite Nanoparticles for Selective Sulfonamide Detection.
Analytical Chemistry, 88, (7), 3578-3584, (2016)
   

Zamora-Gálvez A et al., Magnetic nanoparticle-molecular imprinted polymer: A new impedimetric sensor for tributyltin detection.
Electrochemistry Communications, 82, 6-11, (2017)
   

Zamora-Gálvez A et al., Nanomaterials connected to antibodies and molecularly imprinted polymers as bio/receptors for bio/sensor applications.
Applied Materials Today, 9, 387-401, (2017)
   

Capoferri D et al., Electrochromic Molecular Imprinting Sensor for Visual and Smartphone-Based Detections.
Analytical Chemistry, 90, (9), 5850-5856, (2018)
   

Sari E et al., Paper Based Photoluminescent Sensing Platform with Recognition Sites for Tributyltin.
ACS Sensors, 4, (3), 645-653, (2019)
   

Üzek R et al., A nitrocellulose paper strip for fluorometric determination of bisphenol A using molecularly imprinted nanoparticles.
Microchimica Acta, 186, (4), 218-(2019)
   

Merkx M

Moirangthem M et al., An Optical Sensor Based on a Photonic Polymer Film to Detect Calcium in Serum.
Advanced Functional Materials, 26, (8), 1154-1160, (2016)
   

Merli D

Pesavento M et al., Voltammetric platform for detection of 2, 4, 6-trinitrotoluene based on a molecularly imprinted polymer.
Analytical and Bioanalytical Chemistry, 405, (11), 3559-3570, (2013)
   

Pesavento M et al., Towards the development of cascaded surface plasmon resonance POF sensors exploiting gold films and synthetic recognition elements for detection of contaminants in transformer oil.
Sensing and Bio-Sensing Research, 13, 128-135, (2017)
   

Cennamo N et al., Book chapter, Chemical Sensors Based on Surface Plasmon Resonance in a Plastic Optical Fiber for Multianalyte Detection in Oil-Filled Power Transformer, 
In: Sensors: Proceedings of the Third National Conference on Sensors, February 23-25, 2016, Rome, Italy, Andò B, Baldini F, Di Natale C, Marrazza G, Siciliano P (Eds.) Springer International Publishing: Cham, 128-134, (2018)
   

Merlier F

Tse Sum Bui B et al., Toward the Use of a Molecularly Imprinted Polymer in Doping Analysis: Selective Preconcentration and Analysis of Testosterone and Epitestosterone in Human Urine.
Analytical Chemistry, 82, (11), 4420-4427, (2010)
   

Nestora S et al., Plastic Antibodies for Cosmetics: Molecularly Imprinted Polymers Scavenge Precursors of Malodors.
Angewandte Chemie International Edition, 55, (21), 6252-6256, (2016)
   

Nestora S et al., Solid-phase extraction of betanin and isobetanin from beetroot extracts using a dipicolinic acid molecularly imprinted polymer.
Journal of Chromatography A, 1465, 47-54, (2016)
   

Mourão CA et al., Dual-Oriented Solid-Phase Molecular Imprinting: Toward Selective Artificial Receptors for Recognition of Nucleotides in Water.
Macromolecules, 50, (19), 7484-7490, (2017)
   

Xu JJ et al., Molecularly Imprinted Polymer Nanoparticles as Potential Synthetic Antibodies for Immunoprotection against HIV.
ACS Applied Materials & Interfaces, 11, (10), 9824-9831, (2019)
   

Le Goff N et al., Renewable Plant Oil-Based Molecularly Imprinted Polymers as Biopesticide Delivery Systems.
ACS Sustainable Chemistry & Engineering, 8, (42), 15927-15935, (2020)
   

Jyoti et al., Molecularly imprinted polymer nanoparticles-based electrochemical chemosensors for selective determination of cilostazol and its pharmacologically active primary metabolite in human plasma.
Biosensors and Bioelectronics, 193, Article113542-(2021)
   

Mernier J

Sanglar C et al., Study of Prepolymerization Complex Formation in the Synthesis of Steroid-Based Molecularly Imprinted Polymers.
Analytical Chemistry, 84, (10), 4481-4488, (2012)
   

Mertz E

Mertz E et al., Cross-linked dendrimer hosts containing reporter groups for amine guests.
Journal of the American Chemical Society, 125, (12), 3424-3425, (2003)
   

Mertz E et al., Kinetics and thermodynamics of amine and diamine signaling by a trifluoroacetyl azobenzene reporter group.
Organic Letters, 5, (17), 3127-3130, (2003)
   

Mertz E et al., Integrating chemosensors for amine-containing compounds into cross-linked dendritic hosts.
Tetrahedron, 60, (49), 11191-11204, (2004)
   

Meschievitz ME

Kimmel DW et al., Electrochemical Sensors and Biosensors.
Analytical Chemistry, 84, (2), 685-707, (2012)
   

Meshur B

Meshur B et al., In-Situ Synthesized Myoglobin Imprinted Poly(N-Isopropylacrylamide)/Silica Nanocomposite Gels by Using the Molecular Imprinting Method.
Advances in Material Physics & Chemistry, 4, 1-5, (2014)
   

Mespouille L

Pardo A et al., Targeted extraction of active compounds from natural products by molecularly imprinted polymers.
Central European Journal of Chemistry, 10, (3), 751-765, (2012)
   

Pardo A et al., Molecularly Imprinted Polymers: Compromise between Flexibility and Rigidity for Improving Capture of Template Analogues.
Chemistry - A European Journal, 20, (12), 3500-3509, (2014)
   

Pardo A et al., Quercetin-imprinted chromatographic sorbents revisited: Optimization of synthesis and rebinding protocols for application to natural resources.
Journal of Chromatography A, 1364, 128-139, (2014)
   

Pardo A et al., Synthesis of Quercetin-imprinted Polymer Spherical Particles with Improved Ability to Capture Quercetin Analogues.
Phytochemical Analysis, 28, (4), 289-296, (2017)
   

Metheringham WJ

Borovicka J et al., Photothermal Colloid Antibodies for Shape-Selective Recognition and Killing of Microorganisms.
Journal of the American Chemical Society, 135, (14), 5282-5285, (2013)
   

Metilda P

Metilda P et al., Influence of binary/ternary complex of imprint ion on the preconcentration of uranium(VI) using ion imprinted polymer materials.
Analytica Chimica Acta, 512, (1), 63-73, (2004)
   

Rao TP et al., Preconcentration techniques for uranium(VI) and thorium(IV) prior to analytical determination--an overview.
Talanta, 68, (4), 1047-1064, (2006)
   

Metilda P et al., Investigation of the role of chelating ligand in the synthesis of ion-imprinted polymeric resins on the selective enrichment of uranium(VI).
Analytica Chimica Acta, 587, (2), 263-271, (2007)
   

Metilda P et al., Ion imprinted polymer based sensor for monitoring toxic uranium in environmental samples.
Analytica Chimica Acta, 582, (1), 147-153, (2007)
   

Metran K

Czulak J et al., Formation of target-specific binding sites in enzymes: solid-phase molecular imprinting of HRP.
Nanoscale, 8, (21), 11060-11066, (2016)
   

Metrangolo P

Albers W et al., Self-Assembly of Pyridine-Modified Lipoic Acid Derivatives on Gold and Their Interaction with Thyroxine (T4).
International Journal of Molecular Sciences, 14, (2), 3500-3513, (2013)
   

Albers WM et al., Self-Assembly of Pyridine-Modified Lipoic Acid Derivatives on Gold and Their Interaction with Thyroxine (T4).
International Journal of Molecular Sciences, 14, (2), 3500-3513, (2013)
   

Metwally MM

Monier M et al., Surface ion-imprinted amino-functionalized cellulosic cotton fibers for selective extraction of Cu(II) ions.
International Journal of Biological Macromolecules, 81, 736-746, (2015)
   

Metzger TS

Metzger TS et al., Zn(II)-Protoporphyrin IX-Based Photosensitizer-Imprinted Au-Nanoparticle-Modified Electrodes for Photoelectrochemical Applications.
Advanced Functional Materials, 25, (41), 6470-6477, (2015)
   

Metzger TS et al., Controlled Vectorial Electron Transfer and Photoelectrochemical Applications of Layered Relay/Photosensitizer-Imprinted Au Nanoparticle Architectures on Electrodes.
Small, 12, (12), 1605-1614, (2016)
   

Meucci V

Meucci V et al., Determination of phenylbutazone and flunixin meglumine in equine plasma by electrochemical-based sensing coupled to selective extraction with molecularly imprinted polymers.
Sensors and Actuators B: Chemical, 179, 226-231, (2013)
   

Meucci V et al., Selective and simultaneous determination of NSAIDs in equine plasma by HPLC with molecularly imprinted solid-phase extraction.
Bioanalysis, 6, (16), 2147-2158, (2014)
   

Meucci VM

Meucci VM et al., Determination of phenylbutazone and flunixin meglumine in horse plasma by electro-chemical-based detection coupled to selective extraction with molecularly imprinted polymers.
Journal of Veterinary Pharmacology and Therapeutics, 35, (Supplement 3), 90-90, (2012)
   

Meulenberg EP

Meulenberg EP, Immunochemical Methods for Ochratoxin A Detection: A Review.
Toxins, 4, (4), 244-266, (2012)
   

Mewis RE

Lowdon JW et al., Engineering molecularly imprinted polymers (MIPs) for the selective extraction and quantification of the novel psychoactive substance (NPS) methoxphenidine and its regioisomers.
Analyst, 143, (9), 2002-2007, (2018)
   

Meydan I

Meydan I et al., Selective Extraction and Determination of Citrinin in Rye Samples by a Molecularly Imprinted Polymer (MIP) Using Reversible Addition Fragmentation Chain Transfer Precipitation Polymerization (RAFTPP) with High-Performance Liquid Chromatography (HPLC) Detection.
Analytical Letters, 54, (10), 1697-1708, (2021)
   

Meyer C

Skogsberg U et al., A solid-state and suspended-state magic angle spinning nuclear magnetic resonance spectroscopic investigation of a 9-ethyladenine molecularly imprinted polymer.
Polymer, 48, (1), 229-238, (2007)
   

Meyer CE

El Idrissi M et al., Nanosensors based on polymer vesicles and planar membranes: a short review.
Journal of Nanobiotechnology, 16, (1), ArticleNo63-(2018)
   

Meyer E

Braun HG et al., Microprinting - a new approach to study competitive structure formation on surfaces.
Macromolecular Rapid Communications, 20, (6), 325-327, (1999)
   

Meyer HE

Helling S et al., Ultratrace Enrichment of Tyrosine Phosphorylated Peptides on an Imprinted Polymer.
Analytical Chemistry, 83, (5), 1862-1865, (2011)
   

Mezzache S

Boulanouar S et al., Synthesis and application of molecularly imprinted polymers for the selective extraction of organophosphorus pesticides from vegetable oils.
Journal of Chromatography A, 1513, 59-68, (2017)
   

Boulanouar S et al., Synthesis and application of molecularly imprinted silica for the selective extraction of some polar organophosphorus pesticides from almond oil.
Analytica Chimica Acta, 1018, 35-44, (2018)
   

Boulanouar S et al., Molecularly imprinted polymers for the determination of organophosphorus pesticides in complex samples.
Talanta, 176, 465-478, (2018)
   

Mhaka B

Mhaka B et al., Selective extraction of triazine herbicides from food samples based on a combination of a liquid membrane and molecularly imprinted polymers.
Journal of Chromatography A, 1216, (40), 6796-6801, (2009)
   

Nemulenzi O et al., Potential of combining of liquid membranes and molecularly imprinted polymers in extraction of 17beta-estradiol from aqueous samples.
Journal of Separation Science, 32, (11), 1941-1948, (2009)
   

Mhlanga SD

Mamba BB et al., Book chapter, Advances in Nanostructured Polymers and Membranes for Removal of Heavy Metals in Water, 
In: Aquananotechnology: Global Prospects, Reisner DE, Pradeep T (Eds.) CRC Press: Boca Raton, Ch. 20, 399-418, (2014)
   

Mi HF

Guo MJ et al., Protein-imprinted polymer with immobilized assistant recognition polymer chains.
Biomaterials, 27, (24), 4381-4387, (2006)
   

Zhao Z et al., Molecular imprinted polymer with cloned bacterial protein template enriches authentic target in cell extract.
FEBS Letters, 580, (11), 2750-2754, (2006)
   

Han RF et al., Separation/enrichment of active natural low content protein using protein imprinted polymer.
Journal of Chromatography B, 873, (1), 113-118, (2008)
   

Long Y et al., Molecular imprinted polymer with positively charged assistant recognition polymer chains for adsorption/enrichment of low content target protein.
Chinese Science Bulletin, 53, (17), 2617-2623, (2008)
   

Long Y et al., Two-step purification of low-content cellular protein using protein-imprinted polymers.
Analytical Biochemistry, 380, (2), 268-275, (2008)
   

Xia JJ et al., Separation/enrichment of the low-content high molecular weight natural protein using protein-imprinted polymers with ARPCs.
Science in China Series B: Chemistry, 52, (9), 1388-1393, (2009)
   

Guo MJ et al., Molecularly imprinted polymers with assistant recognition polymer chains for bovine serum albumin.
SCIENCE CHINA Chemistry, 53, (4), 905-911, (2010)
   

Liu HJ et al., Preparation of molecular imprinted polymer with quaternary ammonium groups as recognition sites for separation of pig cyclophilin 18 and bovine serum albumin.
Journal of Separation Science, 33, (12), 1856-1862, (2010)
   

Xia JJ et al., Using Protein-imprinted Polymers as Artificial Antibodies to Isolate Immunoglobulin Binding Protein (BiP) and Study Protein-Protein Interactions.
Chemistry Letters, 39, (5), 475-477, (2010)
   

Gao JF et al., The design of protein-imprinted polymers as antibody substitutes for investigating protein-protein interactions.
Biomaterials, 33, (11), 3344-3352, (2012)
   

Guo MJ et al., Imprinted polymers with cyclodextrin pseudo-polyrotaxanes as pseudo-supports for protein recognition.
Talanta, 105, 409-416, (2013)
   

Yang Q et al., Using molecularly imprinted polymer for protecting functional group in organic reaction.
Journal of Applied Polymer Science, 130, (1), 595-602, (2013)
   

Liu DJ et al., Core-shell molecularly imprinted polymer nanoparticles with assistant recognition polymer chains for effective recognition and enrichment of natural low-abundance protein.
Acta Biomaterialia, 10, (2), 769-775, (2014)
   

Tang YT et al., Well-defined nanostructured surface-imprinted polymers for the highly selective enrichment of low-abundance protein in mammalian cell extract.
New Journal of Chemistry, 40, (12), 10545-10553, (2016)
   

Mi J

Zhou M et al., Determination of Maleic Hydrazide in Vegetables by Molecularly Imprinting Solid Phase Extraction-Chemiluminescence Method.
Food Science, 33, (24), 205-209, (2012)
   

Mi JB

Mi JB et al., Determination of Clenbuterol and Ractopamine in Animal Origin Food by LC-MS/MS Based on a Restricted Access Imprinted Polymer Cartridge for Online Cleanup.
Journal of Instrumental Analysis, 33, (12), 1356-1361, (2014)
   

Mi XW

Shi XH et al., A novel Molecularly Imprinted Sensor based on Gold Nanoparticles/Reduced Graphene Oxide/Single-Walled Carbon Nanotubes Nanocomposite for the Detection of pefloxacin.
International Journal of Electrochemical Science, 15, 9683-9697, (2020)
   

Mi XY

Yu XP et al., Fouling Resistant CA/PVA/TiO2 Imprinted Membranes for Selective Recognition and Separation Salicylic Acid from Waste Water.
Frontiers in Chemistry, 5, ArticleNo2-(2017)
   

Mi ZY

Hu YL et al., Application of Molecular Imprinting Technique in Veterinary Drug Residue Analysis.
Progress in Veterinary Medicine, 32, (1), 103-106, (2011)
   

Mi ZY et al., Proceeding, Recognition of Papain by Konjac Glucomannan-Based Molecularly Imprinted Membrane, 
Zhang H, Jin D (Eds.), 687-690, (2011)
   

Mi ZY et al., Proceeding, Preparation and Characterize of Konjac Glucomannan-Based Protein Molecularly Imprinted Polymer, 
Zhang H, Jin D (Eds.), 460-463, (2012)
   

Miah M

Iqbal Z et al., Rapid CE-UV binding tests of environmentally hazardous compounds with polymer-modified magnetic nanoparticles.
Electrophoresis, 32, (16), 2181-2187, (2011)
   

Miao DW

Xie W et al., Highly sensitive and selective detection of 4-nitroaniline in water by a novel fluorescent sensor based on molecularly imprinted poly(ionic liquid).
Analytical and Bioanalytical Chemistry, 412, (23), 5653-5661, (2020)
   

Miao H

Fan S et al., Simultaneous and confirmative detection of multi-residues of [beta]2-agonists and [beta]-blockers in urine using LC-MS/MS/MS coupled with [beta]-receptor molecular imprinted polymer SPE clean-up.
Food Additives & Contaminants: Part A, 30, (12), 2093-2101, (2013)
   

Miao J

Li JX et al., Preparation and characterization of molecularly imprinted CA/PVDF blend membrane specific for reactive brilliant blue KN-R.
Membrane Science and Technology, 29, (1), 8-12, (2009)
   

Miao JN

Yu MZ et al., Titanium dioxide and polypyrrole molecularly imprinted polymer nanocomposites based electrochemical sensor for highly selective detection of p-nonylphenol.
Analytica Chimica Acta, 1080, 84-94, (2019)
   

Miao JN et al., Magnetic ferroferric oxide and polydopamine molecularly imprinted polymer nanocomposites based electrochemical impedance sensor for the selective separation and sensitive determination of dichlorodiphenyltrichloroethane (DDT).
Analytica Chimica Acta, 1095, 82-92, (2020)
   

Miao L

Huang YY et al., Rapid and sensitive detection of trace malachite green and its metabolite in aquatic products using molecularly imprinted polymer-coated wooden-tip electrospray ionization mass spectrometry.
RSC Advances, 7, (82), 52091-52100, (2017)
   

Miao LF

Wang L et al., A novel nanoenzyme based on Fe3O4 nanoparticles@thionine-imprinted polydopamine for electrochemical biosensing.
Sensors and Actuators B: Chemical, 253, 108-114, (2017)
   

Song YH et al., A dopamine-imprinted chitosan Film/Porous ZnO NPs@carbon Nanospheres/Macroporous carbon for electrochemical sensing dopamine.
Sensors and Actuators B: Chemical, 298, Article126949-(2019)
   

Miao MM

Liu CB et al., Application progress of molecular imprinting techniques in the tobacco industry.
Applied Chemical Industry, 39, (9), 1401-1404, 418, (2010)
   

Miao SS

Zuo HG et al., Progresss of molecular imprinting technique on the determination of pesticides residues.
Journal of Nanjing Agricultural University, 35, (5), 175-182, (2012)
   

Guo LJ et al., Development of a molecularly imprinted polymer for prometryne clean-up in the environment.
Journal of Separation Science, 36, (24), 3911-3917, (2013)
   

Miao SS et al., Preparation of Dufulin imprinted polymer on surface of silica gel and its application as solid-phase extraction sorbent.
Abstracts of Papers of the American Chemical Society, 248, (AGRO), 252-(2014)
   

Miao SS et al., Preparation of Dufulin imprinted polymer on surface of silica gel and its application as solid-phase extraction sorbent.
Environmental Science: Processes & Impacts, 16, (4), 932-941, (2014)
   

Geng HR et al., A newly developed molecularly imprinted polymer on the surface of TiO2 for selective extraction of triazine herbicides residues in maize, water, and soil.
Analytical and Bioanalytical Chemistry, 407, (29), 8803-8812, (2015)
   

Miao SS et al., Core-Shell Magnetic Molecularly Imprinted Polymers as Sorbent for Sulfonylurea Herbicide Residues.
Journal of Agricultural and Food Chemistry, 63, (14), 3634-3645, (2015)
   

Miao YM

Miao YM et al., Construction of biomolecular sensors based on quantum dots.
RSC Advances, 6, (110), 109009-109022, (2016)
   

Luo SQ et al., Phosphorimetric determination of 4-nitrophenol using mesoporous molecular imprinting polymers containing manganese(II)-doped ZnS quantum dots.
Microchimica Acta, 186, (4), Article249-(2019)
   

Miao YM et al., -Phosphorescent Mesoporous Surface Imprinting Microspheres: Preparation and Application for Transferrin Recognition from Biological Fluids.
ACS Applied Materials & Interfaces, 11, (2), 2264-2272, (2019)
   

Miao YQ

Guan JG et al., Impedimetric biosensors.
Journal of Bioscience and Bioengineering, 97, (4), 219-226, (2004)
   

Miao YR

Wang ZW et al., In situ reduced silver nanoparticles embedded molecularly imprinted reusable sensor for selective and sensitive SERS detection of Bisphenol A.
Applied Surface Science, 457, 323-331, (2018)
   

Miao ZC

Song WQ et al., Constructing High-Recognition Protein-Imprinted Materials Using "Specially Designed" Block Macromolecular Chains as Functional Monomers and Crosslinkers.
ACS Applied Materials & Interfaces, 13, (45), 54428-54438, (2021)
   

Yang XL et al., A molecularly imprinted biosensor based on water-compatible and electroactive polymeric nanoparticles for lysozyme detection.
Talanta, 236, Article122891-(2022)
   

Miao ZY

Yang RX et al., Solid-phase extraction based on a molecularly imprinted polymer nanoshell at the surface of silica nanospheres for the specific enrichment and identification of alkaloids from Crinum asiaticum L. var. sinicum.
Journal of Separation Science, 40, (5), 1150-1157, (2017)
   

Miaomiao

Li YX et al., Novel composites of multifunctional Fe3O4@Au nanofibers for highly efficient glycoprotein imprinting.
Journal of Materials Chemistry B, 1, (7), 1044-1051, (2013)
   

Miarecka SG

Dickert FL et al., Synthetic receptors for chemical sensors - subnano- and micrometre patterning by imprinting techniques.
Biosensors and Bioelectronics, 20, (6), 1040-1044, (2004)
   

Micali N

Lauceri R et al., From achiral porphyrins to template-imprinted chiral aggregates and further. Self-replication of chiral memory from scratch.
Journal of the American Chemical Society, 124, (6), 894-895, (2002)
   

Micaller MCA

Micaller MCA et al., Molecular imprinting in polymer stabilized liquid crystals.
Molecular Crystals And Liquid Crystals, 368, 245-254, (2001)
   

Michaelis J

Gast M et al., Use of Super-Resolution Optical Microscopy To Reveal Direct Virus Binding at Hybrid Core-Shell Matrixes.
Analytical Chemistry, 92, (4), 3050-3057, (2020)
   

Michailof C

Michailof C et al., Synthesis of caffeic acid and p-hydroxybenzoic acid molecularly imprinted polymers and their application for the selective extraction of polyphenols from olive mill waste waters.
Journal of Chromatography A, 1182, (1), 25-33, (2008)
   

Michalek J

Sirc J et al., Morphological and chromatographic characterization of molecularly imprinted monolithic columns.
E-Polymers, Art. No. 117-(2007)
   

Micheel B

Warsinke A et al., Biomimetic binders and catalysts for sensorics.
Technisches Messen, 70, (12), 585-588, (2003)
   

Michel M

Chimuka L et al., Advances in sample preparation using membrane-based liquid-phase microextraction techniques.
TrAC Trends in Analytical Chemistry, 30, (11), 1781-1792, (2011)
   

Michiels C

Riveros GD et al., Polydopamine imprinted magnetic nanoparticles as a method to purify and detect class II hydrophobins from heterogeneous mixtures.
Talanta, 160, 761-767, (2016)
   

Michinobu T

Kajisa T et al., Well-designed dopamine-imprinted polymer interface for selective and quantitative dopamine detection among catecholamines using a potentiometric biosensor.
Biosensors and Bioelectronics, 117, 810-817, (2018)
   

Michiwaki S

Masunaga K et al., Development of sensor surface with recognition of molecular substructure.
Sensors and Actuators B: Chemical, 130, (1), 330-337, (2008)
   

Michl S

Eppler S et al., A strategy for high-throughput screening of ligands suitable for molecular imprinting of proteins.
Biosensors and Bioelectronics, 35, (1), 27-32, (2012)
   

Michot L

Griffete N et al., An easy synthesis of small, stable and water-compatible superparamagnetic protein-specific molecularly imprinted nanoparticles.
Polymer, 239, Article124446-(2022)
   

Michota-Kaminska A

Malyshev V et al., Determination of Asymmetric Dimethylarginine by Using Organic Semiconductor-Based Molecularly Imprinted Polymer Film.
ECS Journal of Solid State Science and Technology, 7, (7), Q3189-Q3195, (2018)
   

Miege C

Pichon V et al., Immunosorbents: natural molecular recognition materials for sample preparation of complex environmental matrices.
TrAC Trends in Analytical Chemistry, 18, (3), 219-235, (1999)
   

Miekos E

Czarny K et al., The impact of estrogens on aquatic organisms and methods for their determination.
Critical Reviews in Environmental Science and Technology, 47, (11), 909-963, (2017)
   

Mielniczak A

Wandelt B et al., Steady-state and time-resolved fluorescence studies of fluorescent imprinted polymers.
Journal of Luminescence, 102-103, (1), 774-781, (2003)
   

Wandelt B et al., Monitoring of cAMP-imprinted polymer by fluorescence spectroscopy.
Biosensors and Bioelectronics, 20, (6), 1031-1039, (2004)
   

Mier A

Mier A et al., Cytocompatibility of Molecularly Imprinted Polymers for Deodorants: Evaluation on Human Keratinocytes and Axillary-Hosted Bacteria.
ACS Applied Bio Materials, 2, (8), 3439-3447, (2019)
   

Miertus S

Pizzariello A et al., A solid binding matrix/molecularly imprinted polymer-based sensor system for the determination of clenbuterol in bovine liver using differential-pulse voltammetry.
Sensors and Actuators B: Chemical, 76, (1-3), 286-294, (2001)
   

Migdalski J

Kupis-Rozmyslowicz J et al., Biomimetic membranes based on molecularly imprinted conducting polymers as a sensing element for determination of taurine.
Electrochimica Acta, 188, 537-544, (2016)
   

Mignani A

Tonelli D et al., A novel potentiometric sensor for l-ascorbic acid based on molecularly imprinted polypyrrole.
Electrochimica Acta, 56, (20), 7149-7154, (2011)
   

Mignon P

Sanglar C et al., Study of Prepolymerization Complex Formation in the Synthesis of Steroid-Based Molecularly Imprinted Polymers.
Analytical Chemistry, 84, (10), 4481-4488, (2012)
   

Miguel EM

Ribeiro CM et al., Application of a nanostructured platform and imprinted sol-gel film for determination of chlorogenic acid in food samples.
Talanta, 156-157, 119-125, (2016)
   

Khan S et al., Thioglycolic acid-CdTe quantum dots sensing and molecularly imprinted polymer based solid phase extraction for the determination of kanamycin in milk, vaccine and stream water samples.
Sensors and Actuators B: Chemical, 246, 444-454, (2017)
   

Mihailciuc C

Kiss L et al., Electropolymerized molecular imprinting on glassy carbon electrode for voltammetric detection of dopamine in biological samples.
Talanta, 160, 489-498, (2016)
   

Mijakovic I

Avaz S et al., Graphene based nanosensor for aqueous phase detection of nitroaromatics.
RSC Advances, 7, (41), 25519-25527, (2017)
   

Mijangos I

Piletsky SA et al., Polymer cookery: Influence of polymerization time and different initiation conditions on performance of molecularly imprinted polymers.
Macromolecules, 38, (4), 1410-1414, (2005)
   

Mijangos I et al., Influence of initiator and different polymerisation conditions on performance of molecularly imprinted polymers.
Biosensors and Bioelectronics, 22, (3), 381-387, (2006)
   

Guerreiro AR et al., Influence of continuous magnetic field on the separation of ephedrine enantiomers by molecularly imprinted polymers.
Biosensors and Bioelectronics, 23, (7), 1189-1194, (2008)
   

Garcinuño RM et al., The stabilisation of receptor structure in low cross-linked MIPs by an immobilised template.
Soft Matter, 5, (2), 313-317, (2009)
   

Mijangos L

Ziarrusta H et al., Determination of fluoroquinolones in fish tissues, biological fluids, and environmental waters by liquid chromatography tandem mass spectrometry.
Analytical and Bioanalytical Chemistry, 409, (27), 6359-6370, (2017)
   

Mijiti Y

Yang J et al., Improving performance of molecularly imprinted polymers prepared with template of low purity utilizing the strategy of macromolecular crowding.
Journal of Chromatography A, 1624, Article461155-(2020)
   

Mikhailik Y

Dmitrienko SG et al., Influence of the functional monomer/template ratio in the prepolymerization mixture on the sorption properties of molecularly imprinted polymers of organic compounds.
Moscow University Chemistry Bulletin, 61, (3), 54-61, (2006)
   

Mikhailik YV

Dmitrienko SG et al., Synthesis and study of the sorption properties of 4-hydroxybenzoic acid-imprinted polymers.
Journal of Analytical Chemistry, 61, (1), 14-19, (2006)
   

Mikhalovsky SV

Li XM et al., Polymeric hydrogels for novel contact lens-based ophthalmic drug delivery systems: A review.
Contact Lens and Anterior Eye, 31, (2), 57-64, (2008)
   

Gun’ko VM et al., Cryogels: Morphological, structural and adsorption characterisation.
Advances in Colloid and Interface Science, 187-188, 1-46, (2013)
   

Mikoliunaite L

Ratautaite V et al., Molecularly Imprinted Polypyrrole for DNA Determination.
Electroanalysis, 25, (5), 1169-1177, (2013)
   

Ratautaite V et al., Characterization of Caffeine-Imprinted Polypyrrole by a Quartz Crystal Microbalance and Electrochemical Impedance Spectroscopy.
Sensors and Actuators B: Chemical, 212, 63-71, (2015)
   

Mikrajuddin A

Royani I et al., Proceeding, Effect of Heating Time on Atrazine-Based MIP Materials Synthesized via the Cooling-Heating Method, 
Triyana K, Khairurrijal, Suryana R, Susanto H, Sutikno (Eds.), 89-94, (2014)
   

Miksik I

Cserhati T et al., Chromatographic determination of herbicide residues in various matrices.
Biomedical Chromatography, 18, (6), 350-359, (2004)
   

Mikulska A

Mikulska A et al., Polymeric/silicagel hybrid molecularly photoimprinted adsorbents for adenosine and its derivatives.
European Polymer Journal, 59, 230-238, (2014)
   

Milagros Delgado-Zamareño M

Bustamante-Rangel M et al., Evaluation of the selectivity of molecularly imprinted polymer cartridges for nitroimidazoles. Application to the simultaneous extraction of nitroimidazoles and benzimidazoles from samples of animal origin.
Microchemical Journal, 172, Article107000-(2022)
   

Milani Hosseini MR

Aghaei A et al., A novel capacitive biosensor for cholesterol assay that uses an electropolymerized molecularly imprinted polymer.
Electrochimica Acta, 55, (5), 1503-1508, (2010)
   

Motaharian A et al., Electrochemical sensor based on a carbon paste electrode modified by graphene nanosheets and molecularly imprinted polymer nanoparticles for determination of a chlordiazepoxide drug.
Analytical Methods, 8, (33), 6305-6312, (2016)
   

Khosrokhavar R et al., Screen-printed carbon electrode (SPCE) modified by molecularly imprinted polymer (MIP) nanoparticles and graphene nanosheets for determination of sertraline antidepressant drug.
Microchemical Journal, 159, Article105348-(2020)
   

Saeedzadeh Amiri N et al., Application of ratiometric fluorescence sensor-based microwave-assisted synthesized CdTe quantum dots and mesoporous structured epitope-imprinted polymers for highly efficient determination of tyrosine phosphopeptide.
Analytical Methods, 12, (1), 63-72, (2020)
   

Milani Hosseini SM

Ahmadpour H et al., A molecularly imprinted modified CdSeS/ZnS core-shell quantum dot embedded glass slide for highly selective and sensitive solid phase optosensing of trace amounts of lidocaine in biological samples.
Analytical Methods, 11, (6), 851-859, (2019)
   

Milani R

Albers W et al., Self-Assembly of Pyridine-Modified Lipoic Acid Derivatives on Gold and Their Interaction with Thyroxine (T4).
International Journal of Molecular Sciences, 14, (2), 3500-3513, (2013)
   

Albers WM et al., Self-Assembly of Pyridine-Modified Lipoic Acid Derivatives on Gold and Their Interaction with Thyroxine (T4).
International Journal of Molecular Sciences, 14, (2), 3500-3513, (2013)
   

Milani-Hosseini MR

Amiri NS et al., Fabrication of an eco-friendly ratiometric fluorescence sensor-modified mesoporous-structured epitope-imprinted polymer for highly selective and sensitive determination of cytochrome c in biological samples.
Analytical Methods, 11, (46), 5919-5928, (2019)
   

MilaniHosseini MR

Ramezanipoor E et al., Proceeding, A Novel Capacitive Sensor for Ephedrine Based on Electropolymerized Molecularly Imprinted Polymer, 
(2011)
   

Milanova MM

Kralchevska RP et al., Some endocrine disrupting compounds in the environment and possibilities for their removal / degradation.
Bulgarian Chemical Communications, 45, (2), 131-143, (2013)
   

Milja TE

Milja TE et al., Synthesis of surface imprinted nanospheres for selective removal of uranium from simulants of Sambhar salt lake and ground water.
Journal of Hazardous Materials, 188, (1-3), 384-390, (2011)
   

Milja TE et al., Synthesis, characterization and application of uranyl ion imprinted polymers of aniline and 8-hydroxy quinoline functionalized aniline.
RSC Advances, 4, (58), 30718-30724, (2014)
   

Miller CJ

Gallagher M et al., Synthesis and evaluation of imprinted polymers for selective recognition of fusaric acid.
Abstracts of Papers of the American Chemical Society, 236, (AGFD), 193-(2008)
   

Miller Crotti AE

Marchioni C et al., In-tube solid-phase microextraction with a dummy molecularly imprinted monolithic capillary coupled to ultra-performance liquid chromatography-tandem mass spectrometry to determine cannabinoids in plasma samples.
Analytica Chimica Acta, 1099, 145-154, (2020)
   

Miller EI

Ariffin MM et al., Molecularly Imprinted Solid-Phase Extraction of Diazepam and Its Metabolites from Hair Samples.
Analytical Chemistry, 79, (1), 256-262, (2007)
   

Anderson RA et al., Comparison of molecularly imprinted solid-phase extraction (MISPE) with classical solid-phase extraction (SPE) for the detection of benzodiazepines in post-mortem hair samples.
Forensic Science International, 174, (1), 40-46, (2008)
   

Miller JB

Jayasundera S et al., Investigation of Surface Interactions in Molecular Recognition of Phosphonate Imprinted Organosilicates and the Role of Water.
Journal of Physical Chemistry B, 110, (37), 18121-18125, (2006)
   

Miller JD

Zhou SN et al., Analysis of wheat extracts for ochratoxin A by molecularly imprinted solid-phase extraction and pulsed elution.
Analytical and Bioanalytical Chemistry, 378, (8), 1903-1906, (2004)
   

Miller KA

Miller KA et al., Measurement of the pKa Values of pH Indicators in Solutions and Sol-Gel Matrix.
Journal of Undergraduate Research, 2, 94-94, (2002)
   

Millot MC

Lépinay S et al., In-situ polymerized molecularly imprinted polymeric thin films used as sensing layers in surface plasmon resonance sensors: Mini-review focused on 2010-2011.
Chemical Papers, 66, (5), 340-351, (2012)
   

Mills GA

Walker V et al., Solid-phase extraction in clinical biochemistry.
Annals of Clinical Biochemistry, 39, (5), 464-477, (2002)
   

Pedersen-Bjergaard S et al., Recent progress in sample extraction: A report on the ExTech 2007 Symposium at Alesund, Norway, 3-6 June 2007.
TrAC Trends in Analytical Chemistry, 26, (9), 843-846, (2007)
   

Milne WI

Choong CL et al., Carbon nanotube array: A new MIP platform.
Biosensors and Bioelectronics, 25, (3), 652-656, (2009)
   

Choong CL et al., Dynamic modulation of detection window in conducting polymer based biosensors.
Biosensors and Bioelectronics, 25, (10), 2384-2388, (2010)
   

Milnera M

Birnbaumer GM et al., Detection of viruses with molecularly imprinted polymers integrated on a microfluidic biochip using contact-less dielectric microsensors.
Lab on a Chip, 9, (24), 3549-3556, (2009)
   

Milojkovic SS

Milojkovic SS et al., Radiation induced synthesis of molecularly imprinted polymers.
Polymer, 38, (11), 2853-2855, (1997)
   

Milosevic B

Chronakis IS et al., Generation of molecular recognition sites in electrospun polymer nanofibers via molecular imprinting.
Macromolecules, 39, (1), 357-361, (2006)
   

Min H

Hua Y et al., Hybrid monolith assisted magnetic ion-imprinted polymer extraction coupled with ICP-MS for determination of trace Au(III) in environmental and mineral samples.
Microchemical Journal, 158, Article105210-(2020)
   

Fei JJ et al., Preparation of a novel amino functionalized ion-imprinted hybrid monolithic column for the selective extraction of trace copper followed by ICP-MS detection.
Analytica Chimica Acta, 1162, Article338477-(2021)
   

Min JX

Chen ZL et al., Separation and enrichment of sibiskoside from Sibiraea angustat with magnetic surface dummy template molecularly imprinted polymers.
Journal of Chromatography B, 1178, Article122767-(2021)
   

Min K

Du BB et al., Determination of Sulfonamides in Feeds by High Performance Liquid Chromatography with Molecularly Imprinted Solid Phase Extraction.
Chinese Journal of Analytical Chemistry, 40, (12), 1871-1876, (2012)
   

Min LJ

Luo XB et al., Facile One-Step Synthesis of Inorganic-Framework Molecularly Imprinted TiO2/WO3 Nanocomposite and Its Molecular Recognitive Photocatalytic Degradation of Target Contaminant.
Environmental Science & Technology, 47, (13), 7404-7412, (2013)
   

Min XY

Fang LL et al., Development of an anion imprinted polymer for high and selective removal of arsenite from wastewater.
Science of The Total Environment, 639, 110-117, (2018)
   

Min Y

Li SW et al., Thermoresponsive Epitope Surface-Imprinted Nanoparticles for Specific Capture and Release of Target Protein from Human Plasma.
ACS Applied Materials & Interfaces, 8, (9), 5747-5751, (2016)
   

Minaberry YS

Minaberry YS et al., An ion imprinted amino-functionalized mesoporous sorbent for the selective minicolumn preconcentration of cadmium ions and determination by GFAAS.
Analytical Methods, 10, (44), 5305-5312, (2018)
   

Minami K

Minami K et al., Open-Sandwich Molecular Imprinting: Making a Recognition Matrix with Antigen-Imprinted Antibody Fragments.
Bioconjugate Chemistry, 23, (7), 1463-1469, (2012)
   

Minami T

Zhou Q et al., Extended gate-type organic transistor functionalized by molecularly imprinted polymer for taurine detection.
Nanoscale, 13, (1), 100-107, (2021)
   

Minamimura N

Matsui J et al., Synthetic cinchonidine receptors obtained by cross-linking linear poly(methacrylic acid) derivatives as an alternative molecular imprinting technique.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 223-229, (2004)
   

Minamizaki Y

Vendamme R et al., Influence of Polymer Morphology on the Capacity of Molecularly Imprinted Resins to Release or to Retain their Template.
Polymer Journal, 41, (12), 1055-1066, (2009)
   

Minamoto K

Cheubong C et al., Molecularly imprinted polymer nanogel-based fluorescence sensing of pork contamination in halal meat extracts.
Biosensors and Bioelectronics, 172, Article112775-(2021)
   

Minardo A

Arcadio F et al., Bovine Serum Albumin Protein Detection by a Removable SPR Chip Combined with a Specific MIP Receptor.
Chemosensors, 9, (8), ArticleNo218-(2021)
   

Minarik M

Wulff G et al., Enzyme-analogue built polymers .18. Chiral cavities in polymer layers coated on wide-pore silica.
Reactive Polymers, Ion Exchangers, Sorbents, 3, (4), 261-275, (1985)
   

Wulff G et al., Book chapter, Design and Synthesis of Organic Molecules Based on Molecular Recognition, von Binst G (Ed.) Springer-Verlag: Berlin, 229-233, (1986)
   

Wulff G et al., Enzyme-analog built polymers .20. Pronounced effect of temperature on racemic-resolution using template-imprinted polymeric sorbents.
Journal of High Resolution Chromatography & Chromatography Communications, 9, (10), 607-608, (1986)
   

Wulff G et al., Enzyme-analog built polymers .19. Racemic-resolution on polymers containing chiral cavities.
Journal of Liquid Chromatography, 9, (2-3), 385-405, (1986)
   

Wulff G et al., Book chapter, Chromatographic Chiral Separations, Zief M, Crane LJ (Eds.) Marcel Dekker: New York, 15-52, (1988)
   

Wulff G et al., Template imprinted polymers for HPLC separation of racemates.
Journal of Liquid Chromatography, 13, (15), 2987-3000, (1990)
   

Minarík M

Wulff G et al., Chromatographische Racemat-Trennung an Adsorbentien mit chiralen Hohlräumen.
GIT Labor-Fachzeitschrift, 35, 10-17, (1991)
   

Minas G

Tavares APM et al., Photovoltaics, plasmonics, plastic antibodies and electrochromism combined for a novel generation of self-powered and self-signalled electrochemical biomimetic sensors.
Biosensors and Bioelectronics, 137, 72-81, (2019)
   

Minato Y

Takeuchi T et al., Molecularly imprinted polymers with halogen bonding-based molecular recognition sites.
Tetrahedron Letters, 46, (52), 9025-9027, (2005)
   

Mine Y

Mine Y et al., Enhanced enzyme activity and enantioselectivity of lipases in organic solvents by crown ethers and cyclodextrins.
Journal of Bioscience and Bioengineering, 95, (5), 441-447, (2003)
   

Mine Y et al., Structural effects of amphiphiles on Candida rugosa lipase activation by freeze-drying of aqueous solution of enzyme and amphiphile.
Journal of Bioscience and Bioengineering, 96, (6), 525-528, (2003)
   

Minervini G

Marino S et al., Proceeding, "Screen printing" for chemical sensor and biosensor production, 
Mazzei F, Pilloton R (Eds.), 1-23, (2000)
   

Ming AJ

Zhao WR et al., Electrochemiluminescence solid-state imprinted sensor based on graphene/CdTe@ZnS quantum dots as luminescent probes for low-cost ultrasensing of diethylstilbestrol.
Sensors and Actuators B: Chemical, 306, Article127563-(2020)
   

Zhao WR et al., Sandwich magnetically imprinted immunosensor for electrochemiluminescence ultrasensing diethylstilbestrol based on enhanced luminescence of Ru@SiO2 by CdTe@ZnS quantum dots.
Biosensors and Bioelectronics, 155, Article112102-(2020)
   

Ming HM

Wang XD et al., Sensing of glycoprotein via a biomimetic sensor based on molecularly imprinted polymers and graphene-Au nanoparticles.
Analyst, 138, (4), 1219-1225, (2013)
   

Ming SJ

Jing Z et al., Separation and determination of trace environmental estrogen through molecularly imprinted solid phase extraction coupled to high performance liquid chromatography.
Journal of Environmental Science and Health, Part A, 47, (12), 1889-1896, (2012)
   

Ming WN

Lu WH et al., Molecularly imprinted polymers for dispersive solid-phase extraction of phenolic compounds in aqueous samples coupled with capillary electrophoresis.
Electrophoresis, 37, (19), 2487-2495, (2016)
   

Ming WN et al., Preparation and Applications of Core-Shell Molecularly Imprinted Polymers.
Progress In Chemistry, 28, (4), 552-563, (2016)
   

Ming WN et al., Magnetic molecularly imprinted polymers for the fluorescent detection of trace 17[beta]-estradiol in environmental water.
Sensors and Actuators B: Chemical, 238, 1309-1315, (2017)
   

Ming YF

Ming WN et al., Preparation and Applications of Core-Shell Molecularly Imprinted Polymers.
Progress In Chemistry, 28, (4), 552-563, (2016)
   

Mingarro I

Mingarro I et al., Interfacial activation-based molecular bioimprinting of lipolytic enzymes.
Proceedings of the National Academy of Sciences of the United States of America, 92, (8), 3308-3312, (1995)
   

Mingels RHG

Peeters M et al., Impedimetric Detection of Histamine in Bowel Fluids Using Synthetic Receptors with pH-Optimized Binding Characteristics.
Analytical Chemistry, 85, (3), 1475-1483, (2012)
   

Mingotaud AF

Binet C et al., First approach to the use of liquid crystal elastomers for chemical sensors.
Talanta, 69, (3), 757-762, (2006)
   

Palaprat G et al., Study of Hydrogen Bonding in Liquid Crystalline Solvent by Fourier Transform Infrared Spectroscopy.
Journal of Physical Chemistry A, 110, (47), 12887-12890, (2006)
   

Palaprat G et al., Introduction of unusual properties into polymers by the use of liquid-crystalline moieties.
Polymer International, 55, (10), 1191-1198, (2006)
   

Binet C et al., Benefit of liquid crystal moieties in the MIP technique.
Analytica Chimica Acta, 591, (1), 1-6, (2007)
   

Gué AM et al., Characterization of recognition sites for diethyl 4-nitrobenzylphosphonate, an organophosphate pesticide analogue.
Analytica Chimica Acta, 614, (1), 63-70, (2008)
   

Weyland M et al., Artificial enzymes based on imprinted liquid-crystalline materials.
Liquid Crystals, 35, (2), 219-231, (2008)
   

Mingotaud AF et al., Book chapter, Next generation molecular imprinted polymers: Examples of liquid crystalline materials and hydrogels for protein recognition, 
In: Molecular Recognition: Biotechnology, Chemical Engineering and Materials Applications, McEvoy JA (Ed.) Nova Science Publishers, Inc.: New York, Ch. 2, 45-77, (2011)
   

Minhas MA

Zahara S et al., Molecular imprinting-based extraction of rosmarinic acid from Salvia hypoleuca extract.
Reactive and Functional Polymers, 166, Article104984-(2021)
   

Minhas Z

Behisht A et al., Preconcentration of Nickel from Aqueous Environment Using Microspheric Nickel(II) Ion Imprinted Polymer.
Journal of Water Chemistry and Technology, 43, (5), 379-386, (2021)
   

Minko S

Tokareva I et al., Ultrathin molecularly imprinted polymer sensors employing enhanced transmission surface plasmon resonance spectroscopy.
Chemical Communications, (31), 3343-3345, (2006)
   

Minnikin DE

Nicoara SC et al., Development of sample clean up methods for the analysis of Mycobacterium tuberculosis methyl mycocerosate biomarkers in sputum extracts by gas chromatography-mass spectrometry.
Journal of Chromatography B, 986-987, 135-142, (2015)
   

Minot S

Zouaoui F et al., Theoretical study and analytical performance of a lysozyme impedimetric microsensor based on a molecularly imprinted chitosan film.
Sensors and Actuators B: Chemical, 339, Article129903-(2021)
   

Minoura N

Burow M et al., Molecular imprinting: Synthesis of polymer particles with antibody-like binding characteristics for glucose oxidase.
Biochemical and Biophysical Research Communications, 227, (2), 419-422, (1996)
   

Hirayama K et al., Synthesis of polymer-coated silica particles with specific recognition sites for glucose oxidase by the molecular imprinting technique.
Chemistry Letters, 27, (8), 731-732, (1998)
   

Rachkov A et al., Recognition of oxytocin and oxytocin-related peptides in aqueous media using a molecularly imprinted polymer synthesized by the epitope approach.
Journal of Chromatography A, 889, (1-2), 111-118, (2000)
   

Rachkov A et al., Towards molecularly imprinted polymers selective to peptides and proteins. The epitope approach.
Biochimica et Biophysica Acta - Protein Structure and Molecular Enzymology, 1544, (1-2), 255-266, (2001)
   

Rachkov A et al., Peptide separation using molecularly imprinted polymer prepared by epitope approach.
Analytical Sciences, 17, (Supplement (Proceedings of IUPAC International Congress on Analytical Sciences 2001 (ICAS 2001))), i609-i612, (2001)
   

Kikuchi T et al., Proceeding, Syntheses and properties of temperature-responsive polymer gels with protein recognition sites by using the molecular imprinting techniqueSyntheses and properties of temperature-responsive polymer gels with protein recognition sites by using the molecular imprinting technique, 
1665, (2002)
   

Minoura N et al., Study of the factors influencing peak asymmetry on chromatography using a molecularly imprinted polymer prepared by the epitope approach.
Bioseparation, 10, (6), 399-407, (2002)
   

Minoura N, Proceeding, Syntheses and properties of temperature-responsive polymer gels with protein recognition sites by using the molecular imprinting technique, 
1706, (2002)
   

Minoura N et al., Molecularly imprinted polymer membranes with photoregulated template binding.
Chemistry of Materials, 15, (25), 4703-4704, (2003)
   

Minoura N et al., Preparation of azobenzene-containing polymer membranes that function in photoregulated molecular recognition.
Macromolecules, 37, (25), 9571-9576, (2004)
   

Rachkov A et al., Molecularly imprinted polymers prepared in aqueous solution selective for [Sar(1), Ala(8)]angiotensin II.
Analytica Chimica Acta, 504, (1), 191-197, (2004)
   

Slinchenko O et al., Imprinted polymer layer for recognizing double-stranded DNA.
Biosensors and Bioelectronics, 20, (6), 1091-1097, (2004)
   

Minoura N et al., Detection of double-stranded DNA by utilizing a recognition cavity in molecular imprinting polymer.
Polymer Preprints, Japan, 54, (2), 4749-4750, (2005)
   

Minoura N et al., Detection of target dsDNA by electrophoresis through a molecularly imprinted gel matrix.
Polymer Preprints, Japan, 55, (1), 1671-(2006)
   

Ogiso M et al., Detection of a specific DNA sequence by electrophoresis through a molecularly imprinted polymer.
Biomaterials, 27, (22), 4177-4182, (2006)
   

Ogiso M et al., DNA detection system using molecularly imprinted polymer as the gel matrix in electrophoresis.
Biosensors and Bioelectronics, 22, (9-10), 1974-1981, (2007)
   

Ogawa KI et al., Development of lipid A-imprinted polymer hydrogels that selectively recognize lipopolysaccharides.
Biosensors and Bioelectronics, 38, (1), 215-219, (2012)
   

Ogiso M et al., Preparation of molecularly imprinted polymer gel beads for adsorption of endotoxin.
Kobunshi Ronbunshu, 70, (2), 82-86, (2013)
   

Minteer SD

Ulyanova J et al., Voltammetric investigation of MIP coated silica microparticle/Nafion composite modified electrodes.
Abstracts of Papers of the American Chemical Society, 227, (POLY), 82-82, (2004)
   

Ulyanova YV et al., Molecularly imprinted poly(methylene green) electrodes for the determination of theophylline.
Abstracts of Papers of the American Chemical Society, 229, U1106-U1107, (2005)
   

Blackwell A et al., Molecularly imprinted poly(methylene green) as a drug release system.
Abstracts of Papers of the American Chemical Society, 231, (CHED), 220-220, (2006)
   

Ulyanova YV et al., Poly(methylene green) employed as molecularly imprinted polymer matrix for electrochemical sensing.
Analyst, 131, (2), 257-261, (2006)
   

Blackwell AE et al., Dye polymers as a drug release system and an electrocatalyst for NADH oxidation.
Polymer Preprints, 48, (1), 972-973, (2007)
   

Germain MN et al., Drug delivery system utilizing molecularly imprinted electropolymers.
Abstracts of Papers of the American Chemical Society, 235, (PMSE), 457-(2008)
   

Guo QJ et al., In-situ and controllable synthesis of graphene-gold nanoparticles/molecularly imprinted polymers composite modified electrode for sensitive and selective rutin detection.
Microchemical Journal, 158, Article105254-(2020)
   

Minunni M

Meucci VM et al., Determination of phenylbutazone and flunixin meglumine in horse plasma by electro-chemical-based detection coupled to selective extraction with molecularly imprinted polymers.
Journal of Veterinary Pharmacology and Therapeutics, 35, (Supplement 3), 90-90, (2012)
   

Meucci V et al., Determination of phenylbutazone and flunixin meglumine in equine plasma by electrochemical-based sensing coupled to selective extraction with molecularly imprinted polymers.
Sensors and Actuators B: Chemical, 179, 226-231, (2013)
   

Meucci V et al., Selective and simultaneous determination of NSAIDs in equine plasma by HPLC with molecularly imprinted solid-phase extraction.
Bioanalysis, 6, (16), 2147-2158, (2014)
   

Palladino P et al., Cardiac Troponin T capture and detection in real-time via epitope-imprinted polymer and optical biosensing.
Biosensors and Bioelectronics, 106, 93-98, (2018)
   

Palladino P et al., Corrigendum to "Cardiac Troponin T capture and detection in real-time via epitope-imprinted polymer and optical biosensing" [Biosensors and Bioelectronics 106 (2018) 93-98].
Biosensors and Bioelectronics, 130, 427-427, (2019)
   

Baldoneschi V et al., Norepinephrine as new functional monomer for molecular imprinting: An applicative study for the optical sensing of cardiac biomarkers.
Biosensors and Bioelectronics, 157, Article112161-(2020)
   

Mioskowski C

Curcio P et al., Semi-Covalent Surface Molecular Imprinting of Polymers by One-Stage Mini-emulsion Polymerization: Glucopyranoside as a Model Analyte.
Macromolecular Bioscience, 9, (6), 596-604, (2009)
   

Zandanel C et al., Permethacrylated carbohydrates: synthesis and reactivity in glycosidation reaction.
Tetrahedron, 65, (45), 9395-9402, (2009)
   

Mirahmadi-Zare SZ

Rezaei B et al., Nanoscale Manipulation of Prednisolone as Electroactive Configuration Using Molecularly Imprinted-Multiwalled Carbon Nanotube Paste Electrode.
Electroanalysis, 23, (11), 2724-2734, (2011)
   

Shoghi E et al., Nanosized aptameric cavities imprinted on the surface of magnetic nanoparticles for high-throughput protein recognition.
Microchimica Acta, 185, (4), ArticleNo241-(2018)
   

Miralles B

Aranaz I et al., Functional characterization of chitin and chitosan.
Current Chemical Biology, 3, (2), 203-230, (2009)
   

Miranda JM

Barreiro R et al., Development of a HPLC-MS/MS confirmatory method for the simultaneous determination of amphenicols in baby formulas using molecularly imprinted polymers.
Analytical Methods, 5, (16), 3970-3976, (2013)
   

Díaz-Bao M et al., Fast HPLC-MS/MS Method for Determining Penicillin Antibiotics in Infant Formulas Using Molecularly Imprinted Solid-Phase Extraction.
Journal of Analytical Methods in Chemistry, 2015, ArticleID959675-(2015)
   

Díaz-Bao M et al., Recent Advances and Uses of Monolithic Columns for the Analysis of Residues and Contaminants in Food.
Chromatography, 2, (1), 79-95, (2015)
   

Ibarra IS et al., Sample treatment based on molecularly imprinted polymers for the analysis of veterinary drugs in food samples: a review.
Analytical Methods, 12, (23), 2958-2977, (2020)
   

Miranda LFC

Miranda LFC et al., Selective solid-phase extraction using molecularly imprinted polymers for analysis of venlafaxine, O-desmethylvenlafaxine, and N-desmethylvenlafaxine in plasma samples by liquid chromatography-tandem mass spectrometry.
Journal of Chromatography A, 1458, 46-53, (2016)
   

Brigante TAV et al., Pipette tip dummy molecularly imprinted solid-phase extraction of Bisphenol A from urine samples and analysis by gas chromatography coupled to mass spectrometry.
Journal of Chromatography B, 1067, 25-33, (2017)
   

Roldão MV et al., Development of Molecularly Imprinted Polymers for Solid Phase Extraction of Parabens in Plasma Samples and Analysis by UHPLC-MS/MS .
Journal of the Brazilian Chemical Society, 28, (2), 257-265, (2017)
   

Miranda-Ordieres AJ

Gutierrez-Fernandez S et al., Molecularly imprinted polyphosphazene films as recognition element in a voltammetric rifamycin SV sensor.
Electroanalysis, 13, (17), 1399-1404, (2001)
   

Blanco-López MC et al., Voltammetric sensor for vanillylmandelic acid based on molecularly imprinted polymer-modified electrodes.
Biosensors and Bioelectronics, 18, (4), 353-362, (2003)
   

Blanco-López MC et al., Voltammetric response of diclofenac-molecularly imprinted film modified carbon electrodes.
Analytical and Bioanalytical Chemistry, 377, (2), 257-261, (2003)
   

Blanco-López MC et al., Electrochemical sensing with electrodes modified with molecularly imprinted polymer films.
Analytical and Bioanalytical Chemistry, 378, (8), 1922-1928, (2004)
   

Blanco-López MC et al., Voltammetry of diclofenac at graphite, carbon composites, and molecularly imprinted polymer-composite electrodes.
Analytical Letters, 37, (5), 915-927, (2004)
   

Blanco-López MC et al., Electrochemical sensors based on molecularly imprinted polymers.
TrAC Trends in Analytical Chemistry, 23, (1), 36-48, (2004)
   

Diñeiro Y et al., Computational approach to the rational design of molecularly imprinted polymers for voltammetric sensing of homovanillic acid.
Analytical Chemistry, 77, (20), 6741-6746, (2005)
   

Diñeiro Y et al., Computational predictions and experimental affinity distributions for a homovanillic acid molecularly imprinted polymer.
Biosensors and Bioelectronics, 22, (3), 364-371, (2006)
   

Fernández-Llano L et al., Determination of Diclofenac in Urine Samples by Molecularly-Imprinted Solid-Phase Extraction and Adsorptive Differential Pulse Voltammetry.
Electroanalysis, 19, (15), 1555-1561, (2007)
   

Díaz-Díaz G et al., Molecularly Imprinted Polymers for Electrochemical Sensing: Where Are We Going?
ECS Meeting Abstracts, MA2009-02, (14), 1626-1626, (2009)
   

Díaz-Díaz G et al., Molecularly imprinted catalytic polymers with biomimetic chloroperoxidase activity.
Polymer, 52, (12), 2468-2473, (2011)
   

Díaz-Díaz G et al., Preparation and Characterization of a Molecularly Imprinted Microgel for Electrochemical Sensing of 2, 4, 6-Trichlorophenol.
Electroanalysis, 23, (1), 201-208, (2011)
   

Antuña-Jiménez D et al., Book chapter, Molecularly Imprinted Electrochemical Sensors: Past, Present, and Future, 
In: Molecularly Imprinted Sensors, Li SJ, Ge Y, Piletsky SA, Lunec J (Eds.) Elsevier: Amsterdam, Ch. 1, 1-34, (2012)
   

Díaz-Díaz G et al., New materials for analytical biomimetic assays based on affinity and catalytic receptors prepared by molecular imprinting.
TrAC Trends in Analytical Chemistry, 33, (1), 68-80, (2012)
   

Díaz-Díaz G et al., Hemo-acrylic polymers as catalyst for the oxidative dehalogenation of 2, 4, 6-trichlorophenol. Chloroperoxidase's mimic imprinting effects.
Journal of Molecular Catalysis A: Chemical, 353-354, (1), 117-121, (2012)
   

Antuña-Jiménez D et al., Artificial enzyme with magnetic properties and peroxidase activity on indoleamine metabolite tumor marker.
Polymer, 55, (5), 1113-1119, (2014)
   

Antuña-Jiménez D et al., Artificial enzyme-based catalytic sensor for the electrochemical detection of 5-hydroxyindole-3-acetic acid tumor marker in urine.
Sensors and Actuators B: Chemical, 220, 688-694, (2015)
   

Mirante S

Widstrand C et al., Evaluation of MISPE for the multi-residue extraction of b-agonists from calves urine.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 85-91, (2004)
   

Fiori M et al., Evaluation of two different clean-up steps, to minimise ion suppression phenomena in ion trap liquid chromatography-tandem mass spectrometry for the multi-residue analysis of [beta]-agonists in calves urine.
Analytica Chimica Acta, 529, (1-2), 207-210, (2005)
   

Mirata F

Mirata F et al., Book chapter, Molecularly Imprinted Polymers for Catalysis and Synthesis, 
In: Molecularly Imprinted Polymers in Biotechnology, Mattiasson B, Ye L (Eds.) Springer: Berlin, Heidelberg, Ch. 5, 107-129, (2015)
   

Ray JV et al., Smart coumarin-tagged imprinted polymers for the rapid detection of tamoxifen.
Analytical and Bioanalytical Chemistry, 408, (7), 1855-1861, (2016)
   

Mirata F et al., Book chapter, Metal Complexes and Imprinted Polymers for Shape-Selective Catalysis, 
In: Effects of Nanoconfinement on Catalysis, Poli R (Ed.) Springer International Publishing: Cham, 83-104, (2017)
   

Mirel S

Andaç M et al., Ion-imprinted beads for molecular recognition based mercury removal from human serum.
International Journal of Biological Macromolecules, 40, (2), 159-166, (2007)
   

Mirjankar N

Lavine BK et al., Swellable molecularly imprinted polyN-(N-propyl)acrylamide particles for detection of emerging organic contaminants using surface plasmon resonance spectroscopy.
Talanta, 72, (3), 1042-1048, (2007)
   

Lavine BK et al., Compound specific imprinted nanospheres for optical sensing.
Abstracts of Papers of the American Chemical Society, 235, (ANYL), 49-(2008)
   

Lavine BK et al., Characterization of Swellable Molecularly Imprinted Polymer Particles by Surface Plasmon Resonance Spectroscopy.
Applied Spectroscopy, 66, (4), 440-446, (2012)
   

Mirkes E

Settipani J et al., Theoretical aspects of peptide imprinting: screening of MIP (virtual) binding sites for their interactions with amino acids, di- and tripeptides.
Journal of the Chinese Advanced Materials Society, 6, (3), 301-310, (2018)
   

Piletska EV et al., Combinatorial screening of polymer nanoparticles for their ability to recognize epitopes of AAV-neutralizing antibodies.
Journal of Molecular Recognition, 33, (4), Article_e2824-(2020)
   

Mirmahdieh S

Mirmahdieh S et al., Analysis of testosterone in human urine using molecularly imprinted solid-phase extraction and corona discharge ion mobility spectrometry.
Journal of Separation Science, 34, (1), 107-112, (2011)
   

Mirmoghaddam M

Khajeh M et al., Separation of zinc from aqueous samples using a molecular imprinting technique.
International Journal of Environmental Analytical Chemistry, 89, (13), 981-992, (2009)
   

Khajeh M et al., Imprinted polymer particles for iron uptake: Synthesis, characterization and analytical applications.
Polymer Science Series B, 51, (9), 344-351, (2009)
   

Mirmohseni A

Mirmohseni A et al., Application of a quartz crystal nanobalance to the molecularly imprinted recognition of phenylalanine in solution.
Biotechnology and Bioprocess Engineering, 13, (5), 592-597, (2008)
   

Mirmohseni A et al., Application of nanobalance technique and principal component analysis for detection of the soil fumigant Telone residues in the air.
Journal of Environmental Science and Health, Part B, 47, (7), 677-686, (2012)
   

Mirmohseni A et al., Measurement of the pesticide methomyl by modified quartz crystal nanobalance with molecularly imprinted polymer.
Journal of Environmental Science and Health, Part B, 48, (4), 278-284, (2013)
   

Mirmohseni A et al., Modification of a QCN sensor by SiO2 nanoparticles and MIP for telone determination: Improving its selectivity and sensitivity.
Sensors and Actuators B: Chemical, 188, 31-37, (2013)
   

Mirmohseni A et al., Experimental design and multi-objective optimization of molecularly imprinted polymers for monosaccharides.
RSC Advances, 4, (39), 20177-20184, (2014)
   

Mirmohseni A et al., Application of molecularly imprinted polymer for determination of glucose by quartz crystal nanobalance technique.
IEEE Sensors Journal, 14, (8), 2807-2812, (2014)
   

Mironov NA

Gorbatchuk VV et al., Biomimetic cooperative interactions of dried cross-linked poly(N-6-aminohexylacrylamide) with binary mixtures of solvent vapors.
Biomacromolecules, 5, (4), 1615-1623, (2004)
   

Miroshnichenko II

Baimeeva NV et al., Analytical Methods for the Determination of Atypical Neuroleptics (Review).
Pharmaceutical Chemistry Journal, 50, (5), 339-345, (2016)
   

Mirparizi E

Dahaghin Z et al., Selective trace determination of lead ions in different agricultural products using a novel core-shell magnetic ion-imprinted polymer with the aid of experimental design methodology.
New Journal of Chemistry, 41, (16), 8637-8643, (2017)
   

Mirsattari SN

Faghihian H et al., Kinetics & thermodynamics of Cu(II) adsorption by imprinted salen-functionalized silica gel.
Desalination and Water Treatment, 52, (37-39), 7205-7217, (2014)
   

Mirsky V

Mirsky V et al., Two and three dimensional artificial chemoreceptors: molecular spreader-bar vs. molecular imprinting.
Medical & Biological Engineering & Computing, 37, (Suppl. 2), 344-345, (1999)
   

Mirsky VM

Mirsky VM et al., A spreader-bar approach to molecular architecture: formation of stable artificial chemoreceptors.
Angewandte Chemie International Edition, 38, (8), 1108-1110, (1999)
   

Panasyuk TL et al., Electropolymerized molecularly imprinted polymers as receptor layers in a capacitive chemical sensors.
Analytical Chemistry, 71, (20), 4609-4613, (1999)
   

Mirsky VM et al., Chemical sensors based on ultrathin membranes from molecularly imprinted polymers.
Biologicheskie Membrany, 18, (6), 496-501, (2001)
   

Panasyuk-Delaney T et al., Impedometric herbicide chemosensors based on molecularly imprinted polymers.
Analytica Chimica Acta, 435, (1), 157-162, (2001)
   

Mirsky VM, New electroanalytical applications of self-assembled monolayers.
TrAC Trends in Analytical Chemistry, 21, (6-7), 439-450, (2002)
   

Panasyuk-Delaney T et al., Capacitive creatinine sensor based on a photografted molecularly imprinted polymer.
Electroanalysis, 14, (3), 221-224, (2002)
   

Hirsch T et al., Size-controlled electrochemical synthesis of metal nanoparticles on monomolecular templates.
Angewandte Chemie International Edition, 44, (41), 6775-6778, (2005)
   

Delaney TL et al., Capacitive Detection in Ultrathin Chemosensors Prepared by Molecularly Imprinted Grafting Photopolymerization.
Analytical Chemistry, 79, (8), 3220-3225, (2007)
   

Lange U et al., Conducting polymers in chemical sensors and arrays.
Analytica Chimica Acta, 614, (1), 1-26, (2008)
   

Potyrailo RA et al., Combinatorial and High-Throughput Development of Sensing Materials: The First 10 Years.
Chemical Reviews, 108, (2), 770-813, (2008)
   

Lange U et al., Book chapter, Conducting Polymers as Artificial Receptors in Chemical Sensors, 
In: Artificial Receptors for Chemical Sensors, Mirsky VM, Yatsimirsky AK (Eds.) Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, Ch. 12, 361-390, (2010)
   

Mirza F

Ge Y et al., Book chapter, Molecularly Imprinted Polymers: Promising Advanced Materials for In Vivo Sensing, 
In: Microelectrode Biosensors, Marinesco S, Dale N (Eds.) Humana Press: Ch. 17, 369-384, (2013)
   

Ge Y et al., Smart Molecularly Imprinted Polymers: Recent Developments and Applications.
Macromolecular Rapid Communications, 34, (11), 903-915, (2013)
   

Mirzaee S

Alizadeh T et al., All-solid-state Cr(III)-selective potentiometric sensor based on Cr(III)-imprinted polymer nanomaterial/MWCNTs/carbon nanocomposite electrode.
International Journal of Environmental Analytical Chemistry, 97, (13), 1283-1297, (2017)
   

Alizadeh T et al., A high performance potentiometric sensor for lactic acid determination based on molecularly imprinted polymer/MWCNTs/PVC nanocomposite film covered carbon rod electrode.
Talanta, 192, 103-111, (2019)
   

Mirzaei M

Mirzaei M et al., Preparation and utilization of microporous molecularly imprinted polymer for sustained release of tetracycline.
Journal of Applied Polymer Science, 128, (3), 1557-1562, (2013)
   

Mirzaei M et al., Selective ion-imprinted polymers for preconcentration and determination of silver in water and hair by electrothermal atomic absorption spectrometry.
Journal of Analytical Chemistry, 72, (1), 70-75, (2017)
   

Samadi-Maybodi A et al., Magnetized ion-imprinted polymer-coated nano-particles for selective separation and trace detection of 203Pb using gamma-ray spectrometry.
Journal of Radioanalytical and Nuclear Chemistry, 316, (2), 465-473, (2018)
   

Mirzajani R

Mirzajani R et al., Fabrication of ciprofloxacin molecular imprinted polymer coating on a stainless steel wire as a selective solid-phase microextraction fiber for sensitive determination of fluoroquinolones in biological fluids and tablet formulation using HPLC-UV detection.
Journal of Pharmaceutical and Biomedical Analysis, 122, 98-109, (2016)
   

Mirzajani R et al., Simultaneous preconcentration and determination of malachite green and fuchsine dyes in seafood and environmental water samples using nano-alumina-based molecular imprinted polymer solid-phase extraction.
International Journal of Environmental Analytical Chemistry, 96, (6), 576-594, (2016)
   

Mirzajani R et al., Selective determination of thidiazuron herbicide in fruit and vegetable samples using molecularly imprinted polymer fiber solid phase microextraction with ion mobility spectrometry detection (MIPF-SPME-IMS).
Microchemical Journal, 130, 93-101, (2017)
   

Kardani F et al., Direct cholesterol and [beta]-sitosterol analysis in food samples using monolithic molecularly-imprinted solid-phase microextraction fibers coupled with high performance liquid chromatography.
Journal of the Iranian Chemical Society, 15, (12), 2877-2888, (2018)
   

Mirzajani R et al., Construction and Evaluation of a Graphene Oxide Functionalized Aminopropyltriethoxy Silane Surface Molecularly Imprinted Polymer Potentiometric Sensor for Dipyridamole Detection in Urine and Pharmaceutical Samples.
Journal of the Brazilian Chemical Society, 30, (9), 1874-1886, (2019)
   

Mirzajani R et al., The core-shell nanosized magnetic molecularly imprinted polymers for selective preconcentration and determination of ciprofloxacin in human fluid samples using a vortex-assisted dispersive micro-solid-phase extraction and high-performance liquid chromatography.
Journal of the Iranian Chemical Society, 16, (11), 2291-2306, (2019)
   

Mirzajani R et al., A nanocomposite consisting of graphene oxide, zeolite imidazolate framework 8, and a molecularly imprinted polymer for (multiple) fiber solid phase microextraction of sterol and steroid hormones prior to their quantitation by HPLC.
Microchimica Acta, 186, (3), Article129-(2019)
   

Mirzajani R et al., Fabrication of UMCM-1 based monolithic and hollow fiber - Metal-organic framework deep eutectic solvents/molecularly imprinted polymers and their use in solid phase microextraction of phthalate esters in yogurt, water and edible oil by GC-FID.
Food Chemistry, 314, Article126179-(2020)
   

Mirzoeva ES

Ellis JW et al., Studies on the removal of a carbohydrate template from an imprinted DVB copolymer matrix with potential HPLC applications.
Abstracts of Papers of the American Chemical Society, 212, (MSE), 251-251, (1996)
   

Mirão J

Garcia R et al., A magnetic controllable tool for the selective enrichment of dimethoate from olive oil samples: A responsive molecular imprinting-based approach.
Food Chemistry, 254, 309-316, (2018)
   

Miró M

Boonjob W et al., Online Hyphenation of Multimodal Microsolid Phase Extraction Involving Renewable Molecularly Imprinted and Reversed-Phase Sorbents to Liquid Chromatography for Automatic Multiresidue Assays.
Analytical Chemistry, 82, (7), 3052-3060, (2010)
   

Oliveira HM et al., Exploiting automatic on-line renewable molecularly imprinted solid-phase extraction in lab-on-valve format as front end to liquid chromatography: application to the determination of riboflavin in foodstuffs.
Analytical and Bioanalytical Chemistry, 397, (1), 77-86, (2010)
   

Miró M et al., Analytical potential of mesofluidic lab-on-a-valve as a front end to column-separation systems.
TrAC Trends in Analytical Chemistry, 30, (1), 153-164, (2011)
   

Misheva M

Djourelov N et al., Positron annihilation lifetime spectroscopy of molecularly imprinted hydroxyethyl methacrylate based polymers.
Polymer, 48, (9), 2692-2699, (2007)
   

Mishra A

Ghosal A et al., Book chapter, Design and Engineering of Nanogels, 
In: Nanogels for Biomedical Applications, Vashist A, Kaushik AK, Ahmad S, Nair M (Eds.) RSC: Ch. 2, 9-28, (2018)
   

Mishra AK

Sikiti P et al., Synthesis and characterization of molecularly imprinted polymers for the remediation of PCBs and dioxins in aqueous environments.
Journal of Environmental Health Science and Engineering, 12, (1), Article No 82-(2014)
   

Mishra P

Mishra P et al., Structural basis for the molecular memory of imprinted proteins in anhydrous media.
Biotechnology and Bioengineering, 52, (5), 609-614, (1996)
   

Goyal G et al., Surface Molecularly Imprinted Biomimetic Magnetic Nanoparticles for Enantioseparation.
ACS Applied Nano Materials, 2, (10), 6747-6756, (2019)
   

Bhakta S et al., Molecularly imprinted polymer-based sensors for cancer biomarker detection.
Sensors and Actuators Reports, 3, Article100061-(2021)
   

Mishra RK

Bueno D et al., Portable and low cost fluorescence set-up for in-situ screening of Ochratoxin A.
Talanta, 159, 395-400, (2016)
   

Catanante G et al., Sensitive analytical performance of folding based biosensor using methylene blue tagged aptamers.
Talanta, 153, 138-144, (2016)
   

Mishra RK et al., Sensitive quantitation of Ochratoxin A in cocoa beans using differential pulse voltammetry based aptasensor.
Food Chemistry, 192, 799-804, (2016)
   

Bueno-Hernández D et al., Low cost optical device for detection of fluorescence from Ochratoxin A using a CMOS sensor.
Sensors and Actuators B: Chemical, 246, 606-614, (2017)
   

Mishra S

Singh DK et al., Synthesis of a New Cu(II)-Ion Imprinted Polymer for Solid Phase Extraction and Preconcentration of Cu(II).
Chromatographia, 70, (11), 1539-1545, (2009)
   

Singh DK et al., Synthesis and characterization of UO22+-ion imprinted polymer for selective extraction of UO22+.
Analytica Chimica Acta, 644, (1-2), 42-47, (2009)
   

Singh DK et al., Synthesis, characterization and removal of Cd(II) using Cd(II)-ion imprinted polymer.
Journal of Hazardous Materials, 164, (2-3), 1547-1551, (2009)
   

Singh DK et al., Synthesis, characterization and analytical applications of Ni(II)-ion imprinted polymer.
Applied Surface Science, 256, (24), 7632-7637, (2010)
   

Singh DK et al., Synthesis and characterization of Hg(II)-ion-imprinted polymer: Kinetic and isotherm studies.
Desalination, 257, (1-3), 177-183, (2010)
   

Singh DK et al., Synthesis and characterization of Fe(III)-ion imprinted polymer for recovery of Fe(III) from water samples.
Journal of Scientific and Industrial Research, 69, (10), 767-772, (2010)
   

Mishra S et al., Th(IV) ion-imprinted polymer for selective solid-phase extraction of Th(IV) and its analytical applications.
Desalination and Water Treatment, 56, (5), 1364-1371, (2015)
   

Mishra S et al., Surface ion imprinting-mediated carbon nanofiber-grafted highly porous polymeric beads: Synthesis and application towards selective removal of aqueous Pb(II).
Chemical Engineering Journal, 313, 1142-1151, (2017)
   

Mishra S et al., Selective solid phase extraction and pre-concentration of Cu(II) ions from aqueous solution using Cu(II)-ion imprinted polymeric beads.
Journal of Environmental Chemical Engineering, 8, (2), Article103656-(2020)
   

Mishra SK

Shrivastav A et al., Surface Plasmon Resonance-Based Fiber Optic Sensor for the Detection of Ascorbic Acid Utilizing Molecularly Imprinted Polyaniline Film.
Plasmonics, 10, (6), 1853-1861, (2015)
   

Shrivastav AM et al., Fiber optic SPR sensor for the detection of melamine using molecular imprinting.
Sensors and Actuators B: Chemical, 212, 404-410, (2015)
   

Shrivastav AM et al., Localized and propagating surface plasmon resonance based fiber optic sensor for the detection of tetracycline using molecular imprinting.
Materials Research Express, 2, (3), 035007-(2015)
   

Miskam M

Sanagi MM et al., Molecularly imprinted polymer solid-phase extraction for the analysis of organophosphorus pesticides in fruit samples.
Journal of Food Composition and Analysis, 32, (2), 155-161, (2013)
   

Rozaini MNH et al., Molecularly imprinted silica gel incorporated with agarose polymer matrix as mixed matrix membrane for separation and preconcentration of sulfonamide antibiotics in water samples.
Talanta, 199, 522-531, (2019)
   

Husin NA et al., Application of a new choline-imidazole based deep eutectic solvents in hybrid magnetic molecularly imprinted polymer for efficient and selective removal of naproxen from aqueous samples.
Materials Chemistry and Physics, 261, Article124228-(2021)
   

Mistlberger G

Medina-Castillo AL et al., Novel Strategy To Design Magnetic, Molecular Imprinted Polymers with Well-Controlled Structure for the Application in Optical Sensors.
Macromolecules, 43, (1), 55-61, (2010)
   

Renkecz T et al., Molecularly Imprinted Polymer Microspheres Containing Photoswitchable Spiropyran-Based Binding Sites.
ACS Applied Materials & Interfaces, 5, (17), 8537-8545, (2013)
   

Mistry J

Mistry J et al., Analysis of cooperative interactions in molecularly imprinted polymer nanoparticles.
Molecular Imprinting, 3, (1), 55-64, (2015)
   

Mistry K

Stevenson R et al., CEC '98: The state-of-the-art.
American Laboratory, 30, 16A-16L, (1998)
   

Mita DG

Nicolucci C et al., A high selective and sensitive liquid chromatography-tandem mass spectrometry method for quantization of BPA urinary levels in children.
Analytical and Bioanalytical Chemistry, 405, (28), 9139-9148, (2013)
   

Maradonna F et al., A developmental hepatotoxicity study of dietary bisphenol A in Sparus aurata juveniles.
Comparative Biochemistry and Physiology Part C: Toxicology & Pharmacology, 166, 1-13, (2014)
   

Mita GD

Gallo P et al., Determination of BPA, BPB, BPF, BADGE and BFDGE in canned energy drinks by molecularly imprinted polymer cleaning up and UPLC with fluorescence detection.
Food Chemistry, 220, 406-412, (2017)
   

Mitamura EK

Sagawa T et al., Catalytic and stereoselective activities of cross-linked polymers imprinted with reaction intermediate for enzyme-like reactions.
Recent Research Developments in Pure & Applied Chemistry, 3, (1), 57-71, (1999)
   

Mitani K

Kataoka H et al., On-line in-tube solid-phase microextraction method and its applications.
Japanese Journal of Forensic Toxicology, 20, (3), 251-267, (2002)
   

Mitchell GR

Hasson CD et al., Imprinting chiral structures on liquid crystalline elastomers.
Chemical Communications, (22), 2515-2516, (1998)
   

Hasson CD et al., Imprinting chiral structure on liquid crystalline elastomers.
Molecular Crystals And Liquid Crystals Science And Technology Section A-Molecular Crystals And Liquid Crystals, 332, 155-162, (1999)
   

Mitchell GR et al., Temperature insensitive chiral optical films prepared through the soft imprinting of liquid crystal elastomers.
Abstracts of Papers of the American Chemical Society, 222, (MSE), 356-356, (2001)
   

Mitchell K

Gavrilovic I et al., A molecularly imprinted receptor for separation of testosterone and epitestosterone, based on a steroidal cross-linker.
Steroids, 76, (5), 478-483, (2011)
   

Mitchell P

Mitchell P et al., Precise Generation of Selective Surface-Confined Glycoprotein Recognition Sites.
ACS Applied Bio Materials, 2, (6), 2617-2623, (2019)
   

Mitchell-Koch JT

Mitchell-Koch JT et al., Immobilization of a europium salen complex within porous organic hosts: Modulation of luminescence properties in different chemical environments.
Chemistry of Materials, 15, (18), 3490-3495, (2003)
   

Mitchell-Koch JT et al., Modification of immobilized metal complexes toward the design and synthesis of functional materials for nitric oxide delivery.
Journal of Polymer Science Part A: Polymer Chemistry, 44, (7), 2282-2292, (2006)
   

Mitrayana M

Aba L et al., Selectivity Improvement of Gas Sensor Based on Poly(3, 4-ethylenedioxythiophene):Poly(styrenesulfonate) Thin Film by Using Imprinting Method.
Journal of Modern Physics, 3, (7), 529-533, (2012)
   

Mitreva M

Mitreva M et al., Chromate surface-imprinted silica gel sorbent for speciation of Cr in surface waters.
Turkish Journal of Chemistry, 40, (6), 921-932, (2016)
   

Mitreva M et al., Iron(II) ion imprinted polymer for Fe(II)/Fe(III) speciation in wine.
Microchemical Journal, 132, 238-244, (2017)
   

Mitri K

Hashim SNNS et al., Recovery of ergosterol from the medicinal mushroom, Ganoderma tsugae var. Janniae, with a molecularly imprinted polymer derived from a cleavable monomer-template composite.
Journal of Chromatography A, 1468, 1-9, (2016)
   

Mitrowska K

Mitrowska K et al., New high selective sorbents for solid-phase extraction. Molecularly imprinted polymers.
Wiadomosci Chemiczne, 58, (2004)
   

Mitrowska K et al., Selective Determination of Fourteen Nitroimidazoles in Honey by High-Performance Liquid Chromatography-Tandem Mass Spectrometry.
Analytical Letters, 47, (10), 1634-1649, (2014)
   

Mitsev PA

Ivanova-Mitseva PK et al., Cubic Molecularly Imprinted Polymer Nanoparticles with a Fluorescent Core.
Angewandte Chemie International Edition, 51, (21), 5196-5199, (2012)
   

Mitsuishi M

Kozuka H et al., Binding of anthraquinone dyes by cross-linked polyvinylpyrrolidone.
Journal of Polymer Science, Polymer Chemistry Edition, 24, (10), 2695-2700, (1986)
   

Mitsushita N

Mizutani N et al., Proceeding, Fabrication and Application of Enantioselective TiO2 Nanoflims by Molecular Imprinting, 
1249-1252, (2006)
   

Mittal V

Mittal V, Proceeding, Ion-imprinted chitosan hydrogel for recovering Ag(I) from aqueous solution, 
(2012)
   

Miura C

Haginaka J et al., Monodispersed Molecularly Imprinted Polymer for Creatinine by Modified Precipitation Polymerization.
Analytical Sciences, 28, (4), 315-317, (2012)
   

Miura C et al., Monodisperse, molecularly imprinted polymers for creatinine by modified precipitation polymerization and their applications to creatinine assays for human serum and urine.
Journal of Pharmaceutical and Biomedical Analysis, 85, 288-294, (2013)
   

Miura C et al., Molecularly imprinted polymer for chlorogenic acid by modified precipitation polymerization and its application to extraction of chlorogenic acid from Eucommia ulmodies leaves.
Journal of Pharmaceutical and Biomedical Analysis, 114, 139-144, (2015)
   

Miura C et al., Molecularly imprinted polymer for caffeic acid by precipitation polymerization and its application to extraction of caffeic acid and chlorogenic acid from Eucommia ulmodies leaves.
Journal of Pharmaceutical and Biomedical Analysis, 127, 32-38, (2016)
   

Miura Y

Nakagawa H et al., Spacer effect in the template polycondensation of nucleotide analogs with diamines.
Makromolekulare Chemie-Macromolecular Chemistry And Physics, 183, (9), 2065-2070, (1982)
   

Hoshino Y et al., Interaction between synthetic particles and biomacromolecules: fundamental study of nonspecific interaction and design of nanoparticles that recognize target molecules.
Polymer Journal, 46, (9), 537-545, (2014)
   

Hoshino Y et al., Rational Design of Synthetic Nanoparticles with a Large Reversible Shift of Acid Dissociation Constants: Proton Imprinting in Stimuli Responsive Nanogel Particles.
Advanced Materials, 26, (22), 3718-3723, (2014)
   

Hoshino Y et al., Wide-range pKa tuning of proton imprinted nanoparticles for reversible protonation of target molecules via thermal stimuli.
Journal of Materials Chemistry B, 5, (46), 9204-9210, (2017)
   

Hoshino Y et al., Reversible pKa Modulation of Carboxylic Acids in Temperature-Responsive Nanoparticles through Imprinted Electrostatic Interactions.
ACS Applied Materials & Interfaces, 10, (37), 31096-31105, (2018)
   

Miwa T

Hirose T et al., An Inspection and Measurement Technology Platform Leading the Way to More Advanced Manufacturing.
Hitachi Review, 65, 277-120, (2016)
   

Miyabayashi A

Andersson LI et al., Enantiomeric resolution of amino-acid derivatives on molecularly imprinted polymers as monitored by potentiometric measurements.
Journal of Chromatography A, 516, (2), 323-331, (1990)
   

Miyabe K

Miyabe K et al., A study of mass transfer kinetics in an enantiomeric separation system using a polymeric imprinted stationary phase.
Biotechnology Progress, 16, (4), 617-629, (2000)
   

Miyachi H

Slinchenko O et al., Imprinted polymer layer for recognizing double-stranded DNA.
Biosensors and Bioelectronics, 20, (6), 1091-1097, (2004)
   

Miyahara C

Sagawa T et al., Rate-enhancement of hydrolysis of long-chain amino acid ester by cross-linked polymers imprinted with a transition-state analogue: evaluation of imprinting effect in kinetic analysis.
Analytica Chimica Acta, 504, (1), 37-41, (2004)
   

Miyahara H

Matsui J et al., Solid-phase molecular imprinting utilizing poly(methacrylic acid)-modified resins.
Nippon Kagakkai Koen Yokoshu, 82, 273-(2002)
   

Miyahara T

Miyahara T et al., Two-dimensional molecular imprinting: Binding of sugars to boronic acid functionalized, polymerized Langmuir-Blodgett films.
Chemistry Letters, 29, (12), 1356-1357, (2000)
   

Miyajima T

Kido H et al., Metal-ion complexation behavior of resins prepared by a novel template polymerization technique.
Analytical Sciences, 8, (6), 749-753, (1992)
   

Kido H et al., Metal-ion complexation equilibria of ion-exchange resins prepared by a surface template polymerization.
Kobunshi Ronbunshu, 50, (5), 403-410, (1993)
   

Tsukagoshi K et al., Surface imprinting - characterization of a latex resin and the origin of the imprinting effect.
Bulletin of the Chemical Society of Japan, 68, (11), 3095-3103, (1995)
   

Miyajima T et al., A physiochemical study on the origin of the imprinting effect.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 148-148, (1997)
   

Miyajima T et al., Book chapter, A physicochemical study on the origin of the imprinting effect, 
In: Molecular and Ionic Recognition with Imprinted Polymers, Bartsch RA, Maeda M (Eds.) The American Chemical Society: Washington DC, Ch. 20, 290-297, (1998)
   

Tsukagoshi K et al., Book chapter, Surface imprinting: Preparation of metal ion-imprinted resins by use of complexation at the aqueous-organic interface, 
In: Molecular and Ionic Recognition with Imprinted Polymers, Bartsch RA, Maeda M (Eds.) The American Chemical Society: Washington DC, Ch. 17, 251-263, (1998)
   

Miyake S

Morihara K et al., Footprint catalysis .2. Molecular recognition of footprint catalytic sites.
Bulletin of the Chemical Society of Japan, 61, (11), 3999-4003, (1988)
   

Miyaoka J

Ohya Y et al., Recruitment of enzyme activity in albumin by molecular imprinting.
Macromolecular Rapid Communications, 17, (12), 871-874, (1996)
   

Miyata T

Miyata T et al., Biomolecule-sensitive hydrogels.
Advanced Drug Delivery Reviews, 54, (1), 79-98, (2002)
   

Hishida Y et al., Synthesis of molecularly imprinted gels that shrink in response to target DNA.
Polymer Preprints, Japan, 54, (2), 4745-4746, (2005)
   

Miyata T, Design of Stimuli-Responsive Gels and Their Applications.
Nippon Gomu Kyokaishi, 78, (4), 135-141, (2005)
   

Miyata T et al., Relationship between cross-linked structure and humor-marker-responsive behavior of glycoprotein-imprinted gels.
Polymer Preprints, Japan, 54, (1), 1790-(2005)
   

Miyata T et al., Relationship between structures and molecule-responsive behavior of molecularly imprinted gels.
Polymer Preprints, Japan, 54, (2), 4747-4748, (2005)
   

Miyata T et al., Relationship between structure and molecule-responsive behavior of bisphenol a-imprinted gels.
Polymer Preprints, Japan, 54, (1), 1545-(2005)
   

Hishida Y et al., Responsive behavior of DNA-imprinted gels to target DNA.
Polymer Preprints, Japan, 55, (1), 1956-(2006)
   

Miyata T et al., Proceeding, Preparation of biomolecule-responsive gels by biomolecular imprinting, 
(2006)
   

Miyata T et al., Tumor marker-responsive behavior of gels prepared by biomolecular imprinting.
Proceedings of the National Academy of Sciences of the United States of America, 103, (5), 1190-1193, (2006)
   

Miyata T et al., Synthesis of swelling and shrinking types of DNA-responsive gels and their responsive behavior.
Polymer Preprints, Japan, 55, (2), 5349-5350, (2006)
   

Miyata T et al., Preparation of bioconjugated hydrogels that respond to target biomolecules.
Polymer Preprints, 47, (2), 128-129, (2006)
   

Miyata T et al., Preparation of micro-sized molecule-responsive gels by photo-polymerization.
Polymer Preprints, Japan, 55, (1), 1708-(2006)
   

Okutani M et al., Relationship between molecular recognition functions and responsive behavior of bisphenol a-responsive gels.
Polymer Preprints, Japan, 55, (1), 1706-(2006)
   

Okutani M et al., Molecular recognition and responsive behavior of endocrine-disrupter- responsive gels prepared by molecular imprinting.
Polymer Preprints, Japan, 55, (2), 4528-4529, (2006)
   

Miyata T, Book chapter, Smart hydrogels that respond to target biomolecules, 
In: Biomedical Applications of Smart Materials, Vincenzini P, de Rossi D (Eds.) Scientific.net: 15-21, (2008)
   

Miyata T, Book chapter, Biomolecule-Responsive Hydrogels, 
In: Biomedical Applications of Hydrogels Handbook, Park K, Okano T (Eds.) Springer: New York, 65-86, (2010)
   

Miyata T, Preparation of smart soft materials using molecular complexes.
Polymer Journal, 42, (4), 277-289, (2010)
   

Miyata T et al., Responsive behavior of tumor-marker-imprinted hydrogels using macromolecular cross-linkers.
Journal of Molecular Recognition, 25, (6), 336-343, (2012)
   

Miyata T, Book chapter, Biomolecule-sensitive hydrogels, 
In: Smart Materials for Drug Delivery, Volume 2, Alvarez-Lorenzo C, Concheiro A, Schneider HJ, Shahinpoor M (Eds.) RSC: Cambridge, Ch. 22, 261-289, (2013)
   

Kawamura A et al., Target molecule-responsive hydrogels designed via molecular imprinting using bisphenol A as a template.
Chemical Communications, 50, (76), 11101-11103, (2014)
   

Kuriu Y et al., Formation of Thin Molecularly Imprinted Hydrogel Layers with Lectin Recognition Sites on SPR Sensor Chips by Atom Transfer Radical Polymerization.
Chemistry Letters, 43, (6), 825-827, (2014)
   

Matsumoto K et al., Stimuli-Responsive Hydrogels Using Biomolecular Functions.
Kobunshi Ronbunshu, 71, (4), 125-142, (2014)
   

Miyata T, Book chapter, Target Biomolecule-responsive Hydrogels, 
In: Chemoresponsive Materials: Stimulation by Chemical and Biological Signals, Schneider HJ (Ed.) The Royal Society of Chemistry: Ch. 15, 408-443, (2015)
   

Shiraki Y et al., Preparation of Molecule-Responsive Microsized Hydrogels via Photopolymerization for Smart Microchannel Microvalves.
Macromolecular Rapid Communications, 36, (6), 515-519, (2015)
   

Matsumoto K et al., QCM sensing of bisphenol A using molecularly imprinted hydrogel/conducting polymer matrix.
Polymer Journal, 48, 525-532, (2016)
   

Naraprawatphong R et al., Development of protein-recognition SPR devices by combination of SI-ATRP with biomolecular imprinting using protein ligands.
Molecular Imprinting, 4, (1), 21-30, (2016)
   

Matsumoto K et al., Conformationally Regulated Molecular Binding and Release of Molecularly Imprinted Polypeptide Hydrogels That Undergo Helix-Coil Transition.
Macromolecules, 50, (5), 2136-2144, (2017)
   

Hirayama M et al., Design of protein-responsive micro-sized hydrogels for self-regulating microfluidic systems.
Journal of Micromechanics and Microengineering, 28, (3), ArticleNo034002-(2018)
   

Naraprawatphong R et al., Preparation of molecularly imprinted hydrogel layer SPR sensor chips with lectin-recognition sites via SI-ATRP.
Polymer Journal, 50, (3), 261-269, (2018)
   

Miyazaki K

Morihara K et al., Footprint catalysis .3. Inducible alteration of substrate specificities of silica(alumina) gel catalysts for 2, 4-dinitrophenolysis of toluic anhydrides by footprint imprinting.
Bulletin of the Chemical Society of Japan, 62, (2), 499-505, (1989)
   

Miyazawa T

Matsui J et al., Molecular Imprinting under Molecular Crowding Conditions: An Aid to the Synthesis of a High-Capacity Polymeric Sorbent for Triazine Herbicides.
Analytical Chemistry, 79, (4), 1749-1757, (2007)
   

Matsui J et al., Face-to-face porphyrin moieties assembled with spacing for pyrazine recognition in molecularly imprinted polymers.
Biosensors and Bioelectronics, 25, (3), 635-639, (2009)
   

Miyoshi D

Ochi Y et al., New Central Dogma in Molecular Ecology. (22): Molecular imprinting utilizing water-soluble poly(methacrylic acid) derivatives for recognition of biologically active compounds.
Nippon Kagakkai Koen Yokoshu, 81, (2), 864-(2002)
   

Matsui J et al., Composite of Au nanoparticles and molecularly imprinted polymer as a sensing material.
Analytical Chemistry, 76, (5), 1310-1315, (2004)
   

Matsui J et al., SPR sensor chip for detection of small molecules using molecularly imprinted polymer with embedded gold nanoparticles.
Analytical Chemistry, 77, (13), 4282-4285, (2005)
   

Matsui J et al., Molecular Imprinting within a Single Peptide Molecule for Synthesizing a Water-Soluble ATP Receptor.
Pept. Sci., 396-397, (2006)
   

Matsui J et al., Molecular Imprinting under Molecular Crowding Conditions: An Aid to the Synthesis of a High-Capacity Polymeric Sorbent for Triazine Herbicides.
Analytical Chemistry, 79, (4), 1749-1757, (2007)
   

Matsui J et al., An approach to peptide-based ATP receptors by a combination of random selection, rational design, and molecular imprinting.
Biosensors and Bioelectronics, 25, (3), 563-567, (2009)
   

Miyoshi T

Kajitani H et al., Asdorption Characteristics and Application of Caffeine-Imprinted Polymer.
Nippon Kagakkai Koen Yokoshu, 82, 284-(2002)
   

Kajitani H et al., Caffeine-Imprinted Polymer.
Nippon Kagakkai Koen Yokoshu, 81, (1), 562-(2002)
   

Kajitani H et al., Synthesis and Adsorption Characteristics of Caffeine-Imprinted Polymer.
Nippon Kagakkai Koen Yokoshu, 83, (1), 58-(2003)
   

Hoshino Y et al., Wide-range pKa tuning of proton imprinted nanoparticles for reversible protonation of target molecules via thermal stimuli.
Journal of Materials Chemistry B, 5, (46), 9204-9210, (2017)
   

Miyoshi Y

Matsui J et al., A molecularly imprinted synthetic polymer receptor selective for atrazine.
Analytical Chemistry, 67, (23), 4404-4408, (1995)
   

Matsui J et al., Fluoro-functionalized molecularly imprinted polymers selective for herbicides.
Chemistry Letters, 24, (11), 1007-1008, (1995)
   

Matsui J et al., Rod-type affinity media for liquid-chromatography prepared by in-situ-molecular imprinting.
Analytical Sciences, 11, (6), 1017-1019, (1995)
   

Matsui J et al., A molecularly imprinted nicotine-selective polymer.
Analytical Letters, 29, (12), 2071-2078, (1996)
   

Mizaikoff B

Jakusch M et al., Molecularly imprinted polymers and infrared evanescent wave spectroscopy. A chemical sensors approach.
Analytical Chemistry, 71, (20), 4786-4791, (1999)
   

Janotta M et al., Molecularly imprinted polymers for nitrophenols - An advanced separation material for environmental analysis.
International Journal of Environmental Analytical Chemistry, 80, (2), 75-86, (2001)
   

Mizaikoff B et al., Proceeding, Current applications and new trends in mid-infrared sensor technology and integrated scanning probe sensors, 
208-213, (2001)
   

Molinelli A et al., Advanced solid phase extraction using molecularly imprinted polymers for the determination of quercetin in red wine.
Journal of Agricultural and Food Chemistry, 50, (7), 1804-1808, (2002)
   

Weiss R et al., Towards analysis of mykotoxins in beverages with molecularly imprinted polymers for deoxynivalenol and zearalenone.
Mycotoxin Research, 18, (Suppl. 1), 89-93, (2002)
   

Weiss R et al., Molecular imprinting and solid phase extraction of flavonoid compounds.
Bioseparation, 10, (6), 379-387, (2002)
   

Kraft M et al., New frontiers for mid-infrared sensors: Towards deep sea monitoring with a submarine FT-IR sensor system.
Applied Spectroscopy, 57, (6), 591-599, (2003)
   

Mizaikoff B, Mid-IR fiber-optic sensors.
Analytical Chemistry, 75, (11), 258A-267A, (2003)
   

Weiss R et al., Improving methods of analysis for mycotoxins: molecularly imprinted polymers for deoxynivalenol and zearalenone.
Food Additives and Contaminants, 20, (4), 386-395, (2003)
   

Krska R et al., Advances in the analysis of mycotoxins and its quality assurance.
Food Additives and Contaminants, 22, (4), 345-353, (2005)
   

Molinelli A et al., Analyzing the mechanisms of selectivity in biomimetic self-assemblies via IR and NMR spectroscopy of prepolymerization solutions and molecular dynamics simulations.
Analytical Chemistry, 77, (16), 5196-5204, (2005)
   

Molinelli A et al., Book chapter, Molecularly imprinted polymers for biomolecular recognition, 
In: Protein Nanotechnology: Protocols, Instrumentation, and Applications, Vo-Dinh T (Ed.) Humana Press: Ch. 11, 243-254, (2005)
   

O’Mahony J et al., Towards the rational development of molecularly imprinted polymers: 1H NMR studies on hydrophobicity and ion-pair interactions as driving forces for selectivity.
Biosensors and Bioelectronics, 20, (9), 1884-1893, (2005)
   

O’Mahony J et al., Molecularly imprinted polymers - potential and challenges in analytical chemistry.
Analytica Chimica Acta, 534, (1), 31-39, (2005)
   

Mizaikoff B et al., Capturing Biomolecules with Templated Membranes: Toward Rational Design of Molecularly Imprinted Polymers.
ECS Meeting Abstracts, MA2006-02, (47), 2093-2093, (2006)
   

O’Mahony J et al., Imprinted Polymeric Materials. Insight into the Nature of Prepolymerization Complexes of Quercetin Imprinted Polymers.
Analytical Chemistry, 78, (17), 6187-6190, (2006)
   

O’Mahony J et al., Anatomy of a successful imprint: Analysing the recognition mechanisms of a molecularly imprinted polymer for quercetin.
Biosensors and Bioelectronics, 21, (7), 1383-1392, (2006)
   

Wei ST et al., Understand the mechanism of selectivity in molecular imprinted polymers by molecular dynamic simulation.
Abstracts of Papers of the American Chemical Society, 231, (ANYL), 343-343, (2006)
   

Wei ST et al., Capturing molecules with templated materials--Analysis and rational design of molecularly imprinted polymers.
Analytica Chimica Acta, 578, (1), 50-58, (2006)
   

Wei ST et al., Molecularly imprinted micro and nanospheres for the selective recognition of 17[beta]-estradiol.
Biosensors and Bioelectronics, 21, (10), 1943-1951, (2006)
   

O’Mahony J et al., Correlated theoretical, spectroscopic and X-ray crystallographic studies of a non-covalent molecularly imprinted polymerisation system.
Analyst, 132, (11), 1161-1168, (2007)
   

Wei ST et al., Investigating the mechanisms of 17[beta]-estradiol imprinting by computational prediction and spectroscopic analysis.
Analytical and Bioanalytical Chemistry, 389, (2), 423-431, (2007)
   

Wei ST et al., Binding site characteristics of 17[beta]-estradiol imprinted polymers.
Biosensors and Bioelectronics, 23, (2), 201-209, (2007)
   

Wei ST et al., Recent advances on noncovalent molecular imprints for affinity separations.
Journal of Separation Science, 30, (11), 1794-1805, (2007)
   

Meier F et al., Book chapter, Molecularly Imprinted Polymers as Artificial Receptors, 
In: Artificial Receptors for Chemical Sensors, Mirsky VM, Yatsimirsky AK (Eds.) Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, Ch. 13, 391-437, (2010)
   

Eppler S et al., A strategy for high-throughput screening of ligands suitable for molecular imprinting of proteins.
Biosensors and Bioelectronics, 35, (1), 27-32, (2012)
   

Eppler S et al., A novel extraction device for efficient clean-up of molecularly imprinted polymers.
Analytical Methods, 4, (8), 2296-2299, (2012)
   

Meier F et al., A novel approach for the direct determination of residual template molecules in molecularly imprinted polymer matrices.
Analytical Methods, 4, (9), 2755-2758, (2012)
   

Meier F et al., Computational and experimental study on the influence of the porogen on the selectivity of 4-nitrophenol molecularly imprinted polymers.
Analytica Chimica Acta, 744, 68-74, (2012)
   

Mizaikoff B, Analytische Chemie 2010/2011.
Nachrichten aus der Chemie, 60, (4), 406-420, (2012)
   

O’Mahony J et al., Design and implementation of an imprinted material for the extraction of the endocrine disruptor bisphenol A from milk.
Journal of Chromatography B, 931, 164-169, (2013)
   

Pluhar B et al., Surface imprinting of pepsin via miniemulsion polymerization.
Journal of Materials Chemistry B, 1, (40), 5489-5495, (2013)
   

El Gohary NA et al., Synthesis and application of a molecularly imprinted polymer for the voltammetric determination of famciclovir.
Biosensors and Bioelectronics, 65, 108-114, (2015)
   

Ndunda EN et al., An alternative clean-up column for the determination of polychlorinated biphenyls in solid matrices.
Environmental Science: Processes & Impacts, 17, (12), 2101-2109, (2015)
   

Pluhar B et al., Advanced Evaluation Strategies for Protein-Imprinted Polymer Nanobeads.
Macromolecular Bioscience, 15, (11), 1507-1511, (2015)
   

Pluhar B et al., Binding performance of pepsin surface-imprinted polymer particles in protein mixtures.
Journal of Materials Chemistry B, 3, (30), 6248-6254, (2015)
   

Dinc M et al., Inhibitor-assisted synthesis of silica-core microbeads with pepsin-imprinted nanoshells.
Journal of Materials Chemistry B, 4, (25), 4462-4469, (2016)
   

Karaseva N et al., Piezoelectric sensors using molecularly imprinted nanospheres for the detection of antibiotics.
Sensors and Actuators B: Chemical, 225, 199-208, (2016)
   

Ndunda EN et al., Synthesis of stationary phases that provide group recognition for polychlorinated biphenyls by porogenic fragment template imprinting.
Journal of Separation Science, 39, (5), 939-946, (2016)
   

Ndunda EN et al., Molecularly imprinted polymers for the analysis and removal of polychlorinated aromatic compounds in the environment: a review.
Analyst, 141, (11), 3141-3156, (2016)
   

Zahedi P et al., Biomacromolecule template-based molecularly imprinted polymers with an emphasis on their synthesis strategies: a review.
Polymers for Advanced Technologies, 27, (9), 1124-1142, (2016)
   

El Gohary NA et al., Voltammetric Determination of Valaciclovir Using a Molecularly Imprinted Polymer Modified Carbon Paste Electrode.
Electroanalysis, 29, (5), 1388-1399, (2017)
   

Fernandes RS et al., Molecularly imprinted core-shell hybrid microspheres for the selective extraction of vanillin.
Analytical Methods, 9, (19), 2883-2889, (2017)
   

Neusser G et al., FIB and MIP: understanding nanoscale porosity in molecularly imprinted polymers via 3D FIB/SEM tomography.
Nanoscale, 9, (38), 14327-14334, (2017)
   

Basan H et al., Inhibitor-assisted synthesis of molecularly imprinted microbeads for protein recognition.
Analytical Methods, 10, (9), 997-1005, (2018)
   

Dinc M et al., Selective Binding of Inhibitor-Assisted Surface-Imprinted Core/Shell Microbeads in Protein Mixtures.
ChemistrySelect, 3, (16), 4277-4282, (2018)
   

Fernandes RS et al., Synthesis and characterization of porous surface molecularly imprinted silica microsphere for selective extraction of ascorbic acid.
Microporous And Mesoporous Materials, 264, 28-34, (2018)
   

Gast M et al., Enhanced Selectivity by Passivation: Molecular Imprints for Viruses with Exceptional Binding Properties.
Analytical Chemistry, 90, (9), 5576-5585, (2018)
   

Gast M et al., Understanding the viral load during the synthesis and after rebinding of virus imprinted particles via real-time quantitative PCR.
Analyst, 143, (11), 2616-2622, (2018)
   

Guin JP et al., Selective Navigation of Bisphenol-A from Water to a Polarity Tuned Porous Molecularly Imprinted Polymer.
ChemistrySelect, 3, (43), 12223-12233, (2018)
   

Schauer N et al., Selective binding of matrix metalloproteases MMP-9 and MMP-12 to inhibitor-assisted thermolysin-imprinted beads.
RSC Advances, 8, (57), 32387-32394, (2018)
   

Zink S et al., Virtually imprinted polymers (VIPs): understanding molecularly templated materials via molecular dynamics simulations.
Physical Chemistry Chemical Physics, 20, (19), 13145-13152, (2018)
   

Zink S et al., Efficient prediction of suitable functional monomers for molecular imprinting via local density of states calculations.
Physical Chemistry Chemical Physics, 20, (19), 13153-13158, (2018)
   

Dinc M et al., Recent advances on core-shell magnetic molecularly imprinted polymers for biomacromolecules.
TrAC Trends in Analytical Chemistry, 114, 202-217, (2019)
   

Gast M et al., Advances in imprinting strategies for selective virus recognition a review.
TrAC Trends in Analytical Chemistry, 114, 218-232, (2019)
   

Gast M et al., Selective virus capture via hexon imprinting.
Materials Science and Engineering: C, 99, 1099-1104, (2019)
   

Karaseva NA et al., Synthesis and application of molecularly imprinted polymers for trypsin piezoelectric sensors.
Sensors and Actuators B: Chemical, 280, 272-279, (2019)
   

Kopp T et al., Development of a Selective Adsorbing Material for Binding of Pyrrolizidine Alkaloids in Herbal Extracts, Based on Molecular Group Imprinting.
Planta Med, 85, (13), 1107-1113, (2019)
   

Wagdy HA et al., Synthesis of surface imprinted core-shell nanospheres for the selective determination of asparaginase.
Analytical Methods, 11, (31), 4034-4043, (2019)
   

Gast M et al., Use of Super-Resolution Optical Microscopy To Reveal Direct Virus Binding at Hybrid Core-Shell Matrixes.
Analytical Chemistry, 92, (4), 3050-3057, (2020)
   

Dietl S et al., Epitope-imprinted polymers for biomacromolecules: Recent strategies, future challenges and selected applications.
TrAC Trends in Analytical Chemistry, 143, Article116414-(2021)
   

Dietl S et al., Core-Shell Imprinted Particles for Adenovirus Binding.
Materials, 14, (24), ArticleNo7692-(2021)
   

Fresco-Cala B et al., Development and Characterization of Magnetic SARS-CoV-2 Peptide-Imprinted Polymers.
Nanomaterials, 11, (11), ArticleNo2985-(2021)
   

Kotyrba A et al., Development of Silica Nanoparticle Supported Imprinted Polymers for Selective Lysozyme Recognition.
Nanomaterials, 11, (12), ArticleNo3287-(2021)
   

Mpupa A et al., Recent Advances in Solid-Phase Extraction (SPE) Based on Molecularly Imprinted Polymers (MIPs) for Analysis of Hormones.
Chemosensors, 9, (7), ArticleNo151-(2021)
   

Saad EM et al., Molecularly imprinted polymers for selective extraction of rosmarinic acid from Rosmarinus officinalis L.
Food Chemistry, 335, Article127644-(2021)
   

Mizani F

Majdi M et al., Determination of Dexamethasone disodium phosphate using potentiometric sensors based on molecularly imprinted polymer in flow injection and batch systems.
Analytical and Bioanalytical Electrochemistry, 13, (1), 139-159, (2021)
   

Mizugaki M

Tomioka Y et al., Phenobarbital molecularly imprinted polymer selectively binds phenobarbital.
Biological & Pharmaceutical Bulletin, 20, (4), 397-400, (1997)
   

Mizuhata M

Tatemichi M et al., Protein-Templated Organic/Inorganic Hybrid Materials Prepared by Liquid-Phase Deposition.
Journal of the American Chemical Society, 129, (35), 10906-10910, (2007)
   

Mizukami F

Shiomi T et al., A method for the molecular imprinting of hemoglobin on silica surfaces using silanes.
Biomaterials, 26, (27), 5564-5571, (2005)
   

Mizukawa Y

Cheubong C et al., Molecularly Imprinted Nanogels Capable of Porcine Serum Albumin Detection in Raw Meat Extract for Halal Food Control.
Analytical Chemistry, 92, (9), 6401-6407, (2020)
   

Mizuki H

Samatya S et al., The effect of polystyrene as a porogen on the fluoride ion adsorption of Zr(IV) surface-immobilized resin.
Reactive and Functional Polymers, 70, (1), 63-68, (2010)
   

Mizuki H et al., Zr(IV)-Immobilized Resin Prepared by Surface Template Polymerization for Fluoride Ion Removal.
Solvent Extraction and Ion Exchange, 29, (1), 146-156, (2011)
   

Mizushima H

Mizushima H et al., Electrospun nanofiber membranes from polysulfones with chiral selector aimed for optical resolution.
European Polymer Journal, 48, (10), 1717-1725, (2012)
   

Mizutani N

Mizutani N et al., Proceeding, Fabrication and Application of Enantioselective TiO2 Nanoflims by Molecular Imprinting, 
1249-1252, (2006)
   

Mizutani N et al., Remarkable enantioselectivity of molecularly imprinted TiO2 nano-thin films.
Analytica Chimica Acta, 694, (1-2), 142-150, (2011)
   

Mizutani Y

Hiratani H et al., Controlling drug release from imprinted hydrogels by modifying the characteristics of the imprinted cavities.
Macromolecular Bioscience, 5, (8), 728-733, (2005)
   

Hiratani H et al., Ocular release of timolol from molecularly imprinted soft contact lenses.
Biomaterials, 26, (11), 1293-1298, (2005)
   

Mkayula LL

Mosha DMS et al., Metal ion sequestration: An exciting dimension for molecularly imprinted polymer technology.
Tanzania Journal of Science, 31, (1), 91-98, (2005)
   

Philip JYN et al., Preparation of Molecularly Imprinted Polymers Using Anacardic Acid Monomers Derived from Cashew Nut Shell Liquid.
Journal of Agricultural and Food Chemistry, 55, (22), 8870-8876, (2007)
   

Philip JYN et al., The influence of aliphatic side chain of anacardic acid on molecular recognition properties of imprinted polymers.
Tanzania Journal of Science, 38, (1), 104-117, (2012)
   

Mkhize DS

Mkhize DS et al., Molecularly imprinted membranes (MIMs) for selective removal of polychlorinated biphenyls (PCBs) in environmental waters: fabrication and characterization.
Environmental Science and Pollution Research, 24, (12), 11694-11707, (2017)
   

Mkhize DS et al., Calibration and field application of a molecularly imprinted membrane-passive sampler for the sampling of indicator polychlorinated biphenyls in selected aquatic environments of South Africa.
Water Science And Technology, 79, (5), 808-819, (2019)
   

Mladenova E

Mladenova E et al., Solid-phase extraction in the determination of gold, palladium, and platinum.
Journal of Separation Science, 35, (10-11), 1249-1265, (2012)
   

Mlsna TE

Gunatilake SR et al., Recent advancements in analytical methods for the determination of steroidal estrogen residues in environmental and food matrices.
Analytical Methods, 8, (28), 5556-5568, (2016)
   

Mlunguza NY

Madikizela LM et al., Application of molecularly imprinted polymer designed for the selective extraction of ketoprofen from wastewater.
Water SA, 44, (3), 406-418, (2018)
   

Mmualefe LC

Mmualefe LC et al., Environmental and food sample handling challenges for developing countries.
Toxicological & Environmental Chemistry, 91, (5), 819-835, (2009)
   

Mo CE

Mo CE et al., Floating molecularly imprinted polymers based on liquid crystalline and polyhedral oligomeric silsesquioxanes for capecitabine sustained release.
International Journal of Pharmaceutics, 557, 293-303, (2019)
   

Zhang LP et al., Preparation of Liquid Crystalline Molecularly Imprinted Polymer Coated Metal Organic Framework for Capecitabine Delivery.
Particle & Particle Systems Characterization, 36, (1), Article1800355-(2019)
   

Mo CJ

Ge YR et al., A novel molecularly imprinted polymer:synthesis and adsorption behavior of gatifloxacin.
Chinese Journal of Reactive Polymers, 17, (2), 29-35, (2008)
   

Mo GC

Mo GC et al., A novel ECL sensor based on a boronate affinity molecular imprinting technique and functionalized SiO2@CQDs/AuNPs/MPBA nanocomposites for sensitive determination of alpha-fetoprotein.
Biosensors and Bioelectronics, 126, 558-564, (2019)
   

Mo GC et al., A sensitive electrochemiluminescence biosensor based on metal-organic framework and imprinted polymer for squamous cell carcinoma antigen detection.
Sensors and Actuators B: Chemical, 310, Article127852-(2020)
   

Mo JZ

Zheng HB et al., Facile synthesis of magnetic molecularly imprinted polymers and its application in magnetic solid phase extraction for fluoroquinolones in milk samples.
Journal of Chromatography A, 1329, 17-23, (2014)
   

Mo LJ

Jiao Z et al., A molecularly imprinted chitosan doped with carbon quantum dots for fluorometric determination of perfluorooctane sulfonate.
Microchimica Acta, 185, (10), ArticleNo473-(2018)
   

Mo Q

Huang SQ et al., Highly sensitive molecular imprinted voltammetric sensor for resveratrol assay in wine via polyaniline/gold nanoparticles signal enhancement and polyacrylamide recognition.
Journal of Electroanalytical Chemistry, 895, Article115455-(2021)
   

Mo WM

Mo GC et al., A sensitive electrochemiluminescence biosensor based on metal-organic framework and imprinted polymer for squamous cell carcinoma antigen detection.
Sensors and Actuators B: Chemical, 310, Article127852-(2020)
   

Mo X

Hao LY et al., Fabrication of ordered macroporous CdS and ZnS by colloidal crystal template.
Chinese Chemical Letters, 13, (2), 181-182, (2002)
   

Xu WJ et al., Synthesis and characterization of the molecular imprinting polymer prepared with PAMAM silica.
Journal of Hunan University Natural Sciences, 34, (12), 54-57, (2007)
   

Mo YC

Luo CH et al., Thickness-shear mode acoustic sensor for atrazine using molecularly imprinted polymer as recognition element.
Analytica Chimica Acta, 428, (1), 143-148, (2001)
   

Mo ZH

Sun H et al., Piezoelectric quartz crystal sensor for sensing taste-causing compounds in food.
Sensors and Actuators B: Chemical, 131, (1), 148-158, (2008)
   

Moaddel R

Sambe H et al., Uniformly-Sized, Molecularly Imprinted Polymers for (-)-Nicotine by Precipitation Polymerization and Their Applications.
Chromatography, 27, (Supplement 1), 43-44, (2006)
   

Sambe H et al., Uniformly-sized, molecularly imprinted polymers for nicotine by precipitation polymerization.
Journal of Chromatography A, 1134, (1-2), 88-94, (2006)
   

Maciuk A et al., Screening of tobacco smoke condensate for nicotinic acetylcholine receptor ligands using cellular membrane affinity chromatography columns and missing peak chromatography.
Journal of Pharmaceutical and Biomedical Analysis, 48, (2), 238-246, (2008)
   

Moazami HR

Behbahani M et al., Application of a magnetic molecularly imprinted polymer for the selective extraction and trace detection of lamotrigine in urine and plasma samples.
Journal of Separation Science, 37, (13), 1610-1616, (2014)
   

Behbahani M et al., Selective Solid-Phase Extraction and Trace Monitoring of Lead Ions in Food and Water Samples Using New Lead-Imprinted Polymer Nanoparticles.
Food Analytical Methods, 8, (3), 558-568, (2015)
   

Moazzen E

Ebrahimzadeh H et al., Novel magnetic ion imprinted polymer as a highly selective sorbent for extraction of gold ions in aqueous samples.
Analytical Methods, 4, (10), 3232-3237, (2012)
   

Moazzen E et al., Proceeding, Novel ion imprinted polymer coated Fe3O4 nano-particles as a high selective sorbent for solid phase extraction of gold ion, 
1450-1452, (2012)
   

Ebrahimzadeh H et al., Novel ion-imprinted polymer coated on nanoporous silica as a highly selective sorbent for the extraction of ultratrace quantities of gold ions from mine stone samples.
Microchimica Acta, 180, (5-6), 445-451, (2013)
   

Ebrahimzadeh H et al., Novel ion imprinted polymer coated multiwalled carbon nanotubes as a high selective sorbent for determination of gold ions in environmental samples.
Chemical Engineering Journal, 215-216, 315-321, (2013)
   

Moazzen E et al., A high selective ion-imprinted polymer grafted on a novel nanoporous material for efficient gold extraction.
Journal of Separation Science, 36, (11), 1826-1833, (2013)
   

Ebrahimzadeh H et al., New magnetic polymeric nanoparticles for extraction of trace cadmium ions and the determination of cadmium content in diesel oil samples.
Analytical Methods, 6, (13), 4617-4624, (2014)
   

Ebrahimzadeh H et al., A magnetic ion-imprinted polymer for lead(II) determination: A study on the adsorption of lead(II) by beverages.
Journal of Food Composition and Analysis, 41, 74-80, (2015)
   

Mobram M

Mobram M et al., Study the Sensory Effects of Toxic Compounds of Benzimidazoles by Conductometry.
Bulletin of Environment, Pharmacology and Life Sciences, 5, (12), 1-10, (2016)
   

Mocanu A

Rusen E et al., Synthesis and retention properties of molecularly imprinted polymers for antibiotics containing a 5-nitrofuran ring.
RSC Advances, 7, (80), 50844-50852, (2017)
   

Moczko E

Bakas I et al., Molecular imprinting solid phase extraction for selective detection of methidathion in olive oil.
Analytica Chimica Acta, 734, (1), 99-105, (2012)
   

Bakas I et al., Computational and experimental investigation of molecular imprinted polymers for selective extraction of dimethoate and its metabolite omethoate from olive oil.
Journal of Chromatography A, 1274, 13-18, (2013)
   

Chianella I et al., Direct Replacement of Antibodies with Molecularly Imprinted Polymer Nanoparticles in ELISA - Development of a Novel Assay for Vancomycin.
Analytical Chemistry, 85, (17), 8462-8468, (2013)
   

Cowieson D et al., Grafting of molecularly imprinted polymer to porous polyethylene filtration membranes by plasma polymerization.
Analytical and Bioanalytical Chemistry, 405, (20), 6489-6496, (2013)
   

Moczko E et al., PEG-Stabilized Core-Shell Surface-Imprinted Nanoparticles.
Langmuir, 29, (31), 9891-9896, (2013)
   

Moczko E et al., Surface-modified multifunctional MIP nanoparticles.
Nanoscale, 5, (9), 3733-3741, (2013)
   

Subrahmanyam S et al., Optimization of experimental conditions for synthesis of high affinity MIP nanoparticles.
European Polymer Journal, 49, 100-105, (2013)
   

Guerreiro A et al., Influence of Surface-Imprinted Nanoparticles on Trypsin Activity.
Advanced Healthcare Materials, 3, (9), 1426-1429, (2014)
   

Poma A et al., Automatic reactor for solid-phase synthesis of molecularly imprinted polymeric nanoparticles (MIP NPs) in water.
RSC Advances, 4, (8), 4203-4206, (2014)
   

Shutov RV et al., Introducing MINA - The Molecularly Imprinted Nanoparticle Assay.
Small, 10, (6), 1086-1089, (2014)
   

Mistry J et al., Analysis of cooperative interactions in molecularly imprinted polymer nanoparticles.
Molecular Imprinting, 3, (1), 55-64, (2015)
   

Piletska EV et al., Magnetic high throughput screening system for the development of nano-sized molecularly imprinted polymers for controlled delivery of curcumin.
Analyst, 140, (9), 3113-3120, (2015)
   

Cáceres C et al., Does size matter? Study of performance of pseudo-ELISAs based on molecularly imprinted polymer nanoparticles prepared for analytes of different sizes.
Analyst, 141, (4), 1405-1412, (2016)
   

Piletska E et al., Biomimetic Silica Nanoparticles Prepared by a Combination of Solid-Phase Imprinting and Ostwald Ripening.
Scientific Reports, 7, (1), ArticleNo11537-(2017)
   

Cáceres C et al., Molecularly Imprinted Polymers for the Selective Extraction of Bisphenol A and Progesterone from Aqueous Media.
Polymers, 10, (6), ArticleNo679-(2018)
   

Moczko E et al., Epitope approach in molecular imprinting of antibodies.
Journal of Chromatography B, 1124, 1-6, (2019)
   

Moczko E et al., Molecularly Imprinted Nanoparticles Assay (MINA) in Pseudo ELISA: An Alternative to Detect and Quantify Octopamine in Water and Human Urine Samples.
Polymers, 11, (9), ArticleNo1497-(2019)
   

Mocák J

Lehotay J et al., Imprinted polymers in analytical chemistry.
Nova Biotechnologica et Chimica, 9, (3), 341-348, (2009)
   

Modesto L

Peeters M et al., Thermal detection of histamine with a graphene oxide based molecularly imprinted polymer platform prepared by reversible addition-fragmentation chain transfer polymerization.
Sensors and Actuators B: Chemical, 203, 527-535, (2014)
   

Mody AC

Dulay MT et al., Pathogen-Imprinted Organosiloxane Polymers as Selective Biosensors for the Detection of Targeted E. coli.
C, 4, (2), ArticleNo29-(2018)
   

Moehwald H

Rajkumar R et al., Label-free analyte detection using molecular imprints.
Abstracts of Papers of the American Chemical Society, 235, (ANYL), 16-(2008)
   

Moein MM

Moein MM et al., Proceeding, Preparation a Monolithic loop by molecularly imprinted polymers for on-line extraction and determination of Tramadol in human plasma and urine with high performance liquid chromatography, 
(2011)
   

Moein MM et al., Molecularly imprinted polymer cartridges coupled on-line with high performance liquid chromatography for simple and rapid analysis of dextromethorphan in human plasma samples.
Journal of Chromatography B, 879, (11-12), 777-782, (2011)
   

Javanbakht M et al., On-line clean-up and determination of tramadol in human plasma and urine samples using molecularly imprinted monolithic column coupling with HPLC.
Journal of Chromatography B, 911, 49-54, (2012)
   

Moein MM et al., Molecularly imprinted polymer cartridges coupled on-line with high performance liquid chromatography for simple and rapid analysis of human insulin in plasma and pharmaceutical formulations.
Talanta, 121, 30-36, (2014)
   

Moein MM et al., On-line detection of hippuric acid by microextraction with a molecularly-imprinted polysulfone membrane sorbent and liquid chromatography-tandem mass spectrometry.
Journal of Chromatography A, 1372, 55-62, (2014)
   

Moein MM et al., Solid Phase Microextraction and Related Techniques for Drugs in Biological Samples.
Journal of Analytical Methods in Chemistry, 2014, Article ID 921350-(2014)
   

Moein MM et al., Preparation of monolithic molecularly imprinted polymer sol-gel packed tips for high-throughput bioanalysis: Extraction and quantification of l-tyrosine in human plasma and urine samples utilizing liquid chromatography and tandem mass spectrometry.
Journal of Chromatography B, 967, 168-173, (2014)
   

Moein MM et al., A needle extraction utilizing a molecularly imprinted-sol-gel xerogel for on-line microextraction of the lung cancer biomarker bilirubin from plasma and urine samples.
Journal of Chromatography A, 1366, 15-23, (2014)
   

Moein MM et al., Fabrication of a novel electrospun molecularly imprinted nanomembrane coupled with high-performance liquid chromatography for the selective separation and determination of acesulfame.
Journal of Separation Science, 38, (8), 1372-1379, (2015)
   

Moein MM et al., Three-phase molecularly imprinted sol-gel based hollow fiber liquid-phase microextraction combined with liquid chromatography-tandem mass spectrometry for enrichment and selective determination of a tentative lung cancer biomarker.
Journal of Chromatography B, 995-996, 38-45, (2015)
   

Moein MM et al., Molecularly imprinted polymers for on-line extraction techniques.
Bioanalysis, 7, (17), 2145-2153, (2015)
   

Moein MM et al., Molecularly imprinted sol-gel nanofibers based solid phase microextraction coupled on-line with high performance liquid chromatography for selective determination of acesulfame.
Talanta, 134, 340-347, (2015)
   

Moein MM et al., A new strategy for surface modification of polysulfone membrane by in situ imprinted sol-gel method for the selective separation and screening of l-Tyrosine as a lung cancer biomarker.
Analyst, 140, (6), 1939-1946, (2015)
   

Moein MM et al., On-line determination of sarcosine in biological fluids utilizing dummy molecularly imprinted polymers in microextraction by packed sorbent.
Journal of Separation Science, 38, (5), 788-795, (2015)
   

Zazouli MA et al., On-line extraction and determination of residual sulfathiazole in pharmaceutical wastewater with molecularly imprinted polymers in a packed cartridge coupled with high-performance liquid chromatography.
Analytical Methods, 9, (20), 3019-3028, (2017)
   

Moein MM, Advancements of chiral molecularly imprinted polymers in separation and sensor fields: A review of the last decade.
Talanta, 224, Article121794-(2021)
   

Mofrad AA

Sadeghi S et al., Synthesis of a new ion imprinted polymer material for separation and preconcentration of traces of uranyl ions.
Reactive and Functional Polymers, 67, (10), 966-976, (2007)
   

Mofrad SMRK

Mofrad SMRK et al., Effect of electrostatic functional monomers on lysozyme recognition by molecularly imprinted hydrogel.
Journal of Applied Polymer Science, 132, (5), Article No 41366-(2015)
   

Mofrad SMRK et al., Synthesis of lysozyme imprinted column with macroporous structure and enhanced selectivity: Utilization of cryogelation technique and electrostatic functional monomers.
Journal of Applied Polymer Science, 133, (3), ArticleNo42880-(2016)
   

Moghadam BR

Hassanzadeh J et al., Specific fluorometric assay for direct determination of amikacin by molecularly imprinting polymer on high fluorescent g-C3N4 quantum dots.
Spectrochimica Acta Part A-Molecular and Biomolecular Spctroscopy, 214, 451-458, (2019)
   

Moghadam MH

Mohajeri SA et al., Preparation of a pH-sensitive pantoprazole-imprinted polymer and evaluation of its drug-binding and -releasing properties.
SCIENCE CHINA Chemistry, 57, (6), 857-865, (2014)
   

Seifi M et al., Preparation and study of tramadol imprinted micro-and nanoparticles by precipitation polymerization: Microwave irradiation and conventional heating method.
International Journal of Pharmaceutics, 471, (1-2), 37-44, (2014)
   

Moghadam PN

Fareghi AR et al., Synthesis and characterization of a cellulose-based molecularly imprinted polymer in aqueous solution: The study of Furosemide slow release.
Starch - Stärke, 69, (11-12), ArticleNo1700002-(2017)
   

Fareghi AR et al., Preparation of metal ion-mediated Furosemide molecularly imprinted polymer: synthesis, characterization, and drug release studies.
Colloid & Polymer Science, 295, (6), 945-957, (2017)
   

Moghadamnia AA

Amiri A et al., Synthesis and Evaluating of Nanoporous Molecularly Imprinted Polymers for Extraction of Quercetin as a Bioactive Component of Medicinal Plants.
Iranian Journal of Chemistry and Chemical Engineering, 35, (4), 11-19, (2016)
   

Moghaddam AZ

Sadeghi S et al., Electroanalytical determination of sulfasalazine in pharmaceutical and biological samples using molecularly imprinted polymer modified carbon paste electrode.
Sensors and Actuators B: Chemical, 168, (1), 336-344, (2012)
   

Moghaddas Kia E

Moghaddas Kia E et al., Separation of STIGMA STEROL using magnetic molecularly imprinted nanopolymer fabricated by sol-gel method.
Journal of Urmia University Medical Sciences, 28, (4), 44-53, (2017)
   

Moghimi A

Tajodini N et al., Preconcentration and Determination of Ultra Trace Cobalt(II) in Water Samples Using Co(II)-Imprinted Diazoaminobenzene-Vinylpyridine Copolymers.
Asian Journal of Chemistry, 22, (5), 3335-3344, (2010)
   

Poursharifi MJ et al., Determination of cadmium(II) using Cd(II)-imprinted nano diazoaminobenzene-vinylpyridine copolymers.
Asian Journal of Chemistry, 24, (10), 4563-4568, (2012)
   

Azizinezhad F et al., A rapid and sensitive method for separation of Cu2+ ions from industrial wastewater sample and water samples with methacrylamide-ethylene glycol dimethacrylate: A new synthesis of molecularly imprinted polymer.
IET Nanobiotechnology, 15, (9), 698-709, (2021)
   

Mogollón NGS

Augusto F et al., New materials and trends in sorbents for solid-phase extraction.
TrAC Trends in Analytical Chemistry, 43, 14-23, (2013)
   

Moh SH

Kim YS et al., Book chapter, Preparation and Characteristics of Poly(St-co-MAA) Microgels, 
In: Grid and Distributed Computing, Kim T, Adeli H, Cho H, Gervasi O, Yau SS, Kang BH, Villalba JG (Eds.) Springer Berlin Heidelberg: 263-270, (2011)
   

Mohabbati-Kalejahi E

Mohabbati-Kalejahi E et al., A review on creatinine measurement techniques.
Talanta, 97, 1-8, (2012)
   

Mohadesi A

Ganjeizadeh Rohani F et al., A new diosgenin sensor based on molecularly imprinted polymer of para aminobenzoic acid selected by computer-aided design.
Journal of Pharmaceutical and Biomedical Analysis, 174, 552-560, (2019)
   

Malekzadeh M et al., Development of a New Sensitive Electrochemical Sensor for Dapsone Detection using a Cobalt Metal-Organic Framework/Molecularly Imprinted Polymer.
Analytical & Bioanalytical Electrochemistry, 13, (2), 226-238, (2021)
   

Mohajeri SA

Mohajeri SA et al., Preparation and characterization of a lamotrigine imprinted polymer and its application for drug assay in human serum.
Journal of Separation Science, 31, (20), 3595-3602, (2008)
   

Mohajeri SA et al., Clozapine imprinted polymers: Synthesis, characterization and application for drug assay in human serum.
Analytica Chimica Acta, 683, (1), 143-148, (2010)
   

Mohajeri SA et al., Extraction of crocin from saffron (Crocus sativus) using molecularly imprinted polymer solid-phase extraction.
Journal of Separation Science, 33, (15), 2302-2309, (2010)
   

Mohajeri SA et al., Extraction of crocin from saffron (Crocus sativus) using molecularly imprinted polymer solid-phase extraction.
Clinical Biochemistry, 44, (13, Supplement 1), S136-S136, (2011)
   

Mohajeri SA et al., Clozapine recognition via molecularly imprinted polymers; bulk polymerization versus precipitation method.
Journal of Applied Polymer Science, 121, (6), 3590-3595, (2011)
   

Malaekeh-Nikouei B et al., Controlled release of prednisolone acetate from molecularly imprinted hydrogel contact lenses.
Journal of Applied Polymer Science, 126, (1), 387-394, (2012)
   

Mohajeri SA et al., Development of a pH-responsive imprinted polymer for diclofenac and study of its binding properties in organic and aqueous media.
Drug Development and Industrial Pharmacy, 38, (5), 616-622, (2012)
   

Hadizadeh F et al., Application of molecularly imprinted hydrogel for the preparation of lactose-free milk.
Journal of the Science of Food and Agriculture, 93, (2), 304-309, (2013)
   

Hadizadeh F et al., Non-covalently lactose imprinted polymers and recognition of saccharides in aqueous solutions.
Journal of the Iranian Chemical Society, 10, (2), 207-212, (2013)
   

Malaekeh-Nikouei B et al., Preparation of a Molecularly Imprinted Soft Contact Lens as a New Ocular Drug Delivery System for Dorzolamide.
Current Drug Delivery, 10, (3), 279-285, (2013)
   

Tabassi SAS et al., Dummy template molecularly imprinted polymer for omeprazole and the study of its drug binding and release properties.
Journal of Applied Polymer Science, 130, (6), 4165-4170, (2013)
   

Davoodi D et al., Preparation, evaluation and application of diazinon imprinted polymers as the sorbent in molecularly imprinted solid-phase extraction and liquid chromatography analysis in cucumber and aqueous samples.
Food Chemistry, 158, 421-428, (2014)
   

Mohajeri SA et al., Preparation of a pH-sensitive pantoprazole-imprinted polymer and evaluation of its drug-binding and -releasing properties.
SCIENCE CHINA Chemistry, 57, (6), 857-865, (2014)
   

Mohajeri SA et al., Preparation of a pH-sensitive pantoprazole-imprinted polymer and evaluation of its drug-binding and -releasing properties.
SCIENCE CHINA Chemistry, 57, (6), 857-865, (2014)
   

Rahmani A et al., Haloperidol imprinted polymer: preparation, evaluation, and application for drug assay in brain tissue.
Analytical and Bioanalytical Chemistry, 406, (29), 7729-7739, (2014)
   

Sahebnasagh A et al., Preparation and Evaluation of Histamine Imprinted Polymer as a Selective Sorbent in Molecularly Imprinted Solid-Phase Extraction Coupled with High Performance Liquid Chromatography Analysis in Canned Fish.
Food Analytical Methods, 7, (1), 1-8, (2014)
   

Seifi M et al., Preparation and study of tramadol imprinted micro-and nanoparticles by precipitation polymerization: Microwave irradiation and conventional heating method.
International Journal of Pharmaceutics, 471, (1-2), 37-44, (2014)
   

Bayat M et al., Determination of Diazinon Pesticide Residue in Tomato Fruit and Tomato Paste by Molecularly Imprinted Solid-Phase Extraction Coupled with Liquid Chromatography Analysis.
Food Analytical Methods, 8, (4), 1034-1041, (2015)
   

Omranipour HM et al., Brimonidine Imprinted Hydrogels and Evaluation of Their Binding and Releasing Properties as New Ocular Drug Delivery Systems.
Current Drug Delivery, 12, (6), 717-725, (2015)
   

Tashakori-Sabzevar F et al., Development of ocular drug delivery systems using molecularly imprinted soft contact lenses.
Drug Development and Industrial Pharmacy, 41, (5), 703-713, (2015)
   

Bakhshizadeh M et al., TiO2-based mitoxantrone imprinted poly (methacrylic acid-co-polycaprolctone diacrylate) nanoparticles as a drug delivery system.
Current Pharmaceutical Design, 23, (18), 2685-2694, (2017)
   

Habibi-Khorasani M et al., Development of solid-phase microextraction coupled with liquid chromatography for analysis of tramadol in brain tissue using its molecularly imprinted polymer.
Biomedical Chromatography, 31, (2), ArticleNoe3787-(2017)
   

Kioomars S et al., Ciprofloxacin-imprinted hydrogels for drug sustained release in aqueous media.
Pharmaceutical Development and Technology, 22, (1), 122-129, (2017)
   

Abbasi Ghaeni F et al., Preparation of dual-template molecularly imprinted nanoparticles for organophosphate pesticides and their application as selective sorbents for water treatment.
Separation Science and Technology, 53, (16), 2517-2526, (2018)
   

Mansouri E et al., Preparation and Characterization of Herbicide Mecoprop Imprinted Polymer and Its Application as a Selective Sorbent in Water Sample.
Bulletin of Environmental Contamination and Toxicology, 101, (5), 657-663, (2018)
   

Mohsenzadeh MS et al., Simple and selective analysis of different antibiotics in milk using molecularly imprinted polymers: a review.
Food Additives & Contaminants: Part A, 35, (10), 1959-1974, (2018)
   

Soheilifar S et al., Application of molecularly imprinted polymer in solid-phase microextraction coupled with HPLC-UV for analysis of dibutyl phthalate in bottled water and soft drink samples.
Journal of Liquid Chromatography & Related Technologies, 41, (9), 552-560, (2018)
   

Bakhshizadeh M et al., Utilizing photosensitizing and radiosensitizing properties of TiO2-based mitoxantrone imprinted nanopolymer in fibrosarcoma and melanoma cells.
Photodiagnosis and Photodynamic Therapy, 25, 472-479, (2019)
   

Negarian M et al., Preparation, evaluation and application of core-shell molecularly imprinted particles as the sorbent in solid-phase extraction and analysis of lincomycin residue in pasteurized milk.
Food Chemistry, 288, 29-38, (2019)
   

Yousefsani BS et al., Liquid Chromatography Analysis of Clozapine in Rat Brain Tissue, Using its Molecularly Imprinted Polymer after Administration of Toxic Dose of Drug and Lipid Emulsion Therapy.
Current Pharmaceutical Analysis, 15, (3), 251-257, (2019)
   

Eidi S et al., Selective isolation of sesquiterpene coumarins from asafoetida using dummy molecularly imprinted solid phase extraction method.
Journal of Chromatography B, 1138, Article121943-(2020)
   

Mohammadinejad A et al., Preparation, evaluation, and application of dummy molecularly imprinted polymer for analysis of hesperidin in lime juice.
Journal of Separation Science, 44, (7), 1490-1500, (2021)
   

Mohajerzadeh S

Mashinchian O et al., Cell-Imprinted Substrates Act as an Artificial Niche for Skin Regeneration.
ACS Applied Materials & Interfaces, 6, (15), 13280-13292, (2014)
   

Mohamad S

Raof SFA et al., Synthesis and Evaluation of Molecularly Imprinted Silica Gel for 2-Hydroxybenzoic Acid in Aqueous Solution.
International Journal of Molecular Sciences, 14, (3), 5952-5965, (2013)
   

Surikumaran H et al., Molecular Imprinted Polymer of Methacrylic Acid Functionalised [beta]-Cyclodextrin for Selective Removal of 2, 4-Dichlorophenol.
International Journal of Molecular Sciences, 15, (4), 6111-6136, (2014)
   

Asman S et al., Exploiting [beta]-Cyclodextrin in Molecular Imprinting for Achieving Recognition of Benzylparaben in Aqueous Media.
International Journal of Molecular Sciences, 16, (2), 3656-3676, (2015)
   

Asman S et al., Effects of RAFT Agent on the Selective Approach of Molecularly Imprinted Polymers.
Polymers, 7, (3), 484-503, (2015)
   

Asman S et al., Influence of polymer morphology on the adsorption behaviors of molecularly imprinted polymer-methacrylic acid functionalized [beta]-cyclodextrin.
Journal of Applied Polymer Science, 132, (43), ArticleNo42720-(2015)
   

Surikumaran H et al., [beta]-Cyclodextrin Based Molecularly Imprinted Solid Phase Extraction for Class Selective Extraction of Priority Phenols in Water Samples.
Separation Science and Technology, 50, (15), 2342-2351, (2015)
   

Asman S et al., Study of the morphology and the adsorption behavior of molecularly imprinted polymers prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization process based on two functionalized [beta]-cyclodextrin as monomers.
Journal of Molecular Liquids, 214, 59-69, (2016)
   

Surikumaran H et al., Synthesis and evaluation of methacrylic acid functionalized [beta]-cyclodextrin based molecular imprinted polymer for 2, 4-dichlorophenol in water samples.
Desalination and Water Treatment, 57, (1), 254-267, (2016)
   

Mohamad SNH

Rahman MRA et al., Characterization of Bacterial Cellulose-Chitosan Composite Membrane Grafted With Theophylline-Imprinted Copolymer.
Applied Polymer Composites, 1, (3), 167-186, (2013)
   

Mohamad Zain NN

Husin NA et al., Application of a new choline-imidazole based deep eutectic solvents in hybrid magnetic molecularly imprinted polymer for efficient and selective removal of naproxen from aqueous samples.
Materials Chemistry and Physics, 261, Article124228-(2021)
   

Mohamadnia Z

Ahmadi E et al., Preparation and characterization of Zn(II) ion-imprinted polymer based on salicylic acrylate for recovery of Zn(II) ions.
Polímeros, 26, (3), 242-248, (2016)
   

Mohamed AA

Ahmed MA et al., Molecular imprinted chitosan-TiO2 nanocomposite for the selective removal of Rose Bengal from wastewater.
International Journal of Biological Macromolecules, 107, (Part A), 1046-1053, (2018)
   

Mohamed D

Rizk M et al., A new potentiometric sensor based on molecularly imprinted polymer for analysis of a veterinary drug imidocarb dipropionate.
European Journal of Chemistry, 5, (1), 18-23, (2014)
   

Mohamed El Nashar R

Abdel Ghani NT et al., Computational Design, Synthesis and Application of a New Selective Molecularly Imprinted Polymer for Electrochemical Detection.
Electroanalysis, 28, (7), 1530-1538, (2016)
   

Saad EM et al., Molecularly imprinted polymers for selective extraction of rosmarinic acid from Rosmarinus officinalis L.
Food Chemistry, 335, Article127644-(2021)
   

Mohamed FA

Mohamed FA et al., Fabrication of water compatible and biodegradable super-paramagnetic molecularly imprinted nanoparticles for selective separation of memantine from human serum prior to its quantification: An efficient and green pathway.
International Journal of Biological Macromolecules, 140, 140-148, (2019)
   

Mohamed Idris Z

Mohamed Idris Z et al., Amino-functionalised silica-grafted molecularly imprinted polymers for chloramphenicol adsorption.
Journal of Environmental Chemical Engineering, 8, (5), Article103981-(2020)
   

Mohamed NH

Selambakkannu S et al., Preparation and optimization of thorium selective ion imprinted nonwoven fabric grafted with poly(2-dimethylaminoethyl methacrylate) by electron beam irradiation technique.
Journal of Environmental Chemical Engineering, 8, (3), Article103737-(2020)
   

Mohamed R

Allais F et al., ROMP versus radical polymerization in molecular imprinting.
Abstracts of Papers of the American Chemical Society, 225, (CHED), 103-103, (2003)
   

Enholm EJ et al., A Comparison of a Radical Polymerization vs ROMP Matrix for Molecular Imprinting.
Macromolecules, 39, (23), 7859-7862, (2006)
   

Mohamed R et al., Advantages of Molecularly Imprinted Polymers LC-ESI-MS/MS for the Selective Extraction and Quantification of Chloramphenicol in Milk-Based Matrixes. Comparison with a Classical Sample Preparation.
Analytical Chemistry, 79, (24), 9557-9565, (2007)
   

Mohamed R et al., Use of Molecularly Imprinted Solid-Phase Extraction Sorbent for the Determination of Four 5-Nitroimidazoles and Three of Their Metabolites from Egg-Based Samples before Tandem LC-ESIMS/MS Analysis.
Journal of Agricultural and Food Chemistry, 56, (10), 3500-3508, (2008)
   

Mohamedian H

Gholami H et al., Application of Molecularly Imprinted Biomembrane for Advancement of Matrix Solid-Phase Dispersion for Clean Enrichment of Parabens from Powder Sunscreen Samples: Optimization of Chromatographic Conditions and Green Approach.
ACS Omega, 4, (2), 3839-3849, (2019)
   

Mohammad AW

Azizkhani S et al., Adsorption of Copper from aqueous solution by chitosan using molecular imprinting technology.
Science and Technology Indonesia, 3, (4), 141-146, (2018)
   

Mohammad F

Khairi NAS et al., Removal of Toxic Mercury from Petroleum Oil by Newly Synthesized Molecularly-Imprinted Polymer.
International Journal of Molecular Sciences, 16, (5), 10562-10577, (2015)
   

Rahman SKA et al., Correction: Evaluation of porogen factors for the preparation of ion imprinted polymer monoliths used in mercury removal.
PLoS ONE, 13, (11), Article_e0208242-(2018)
   

Rahman SKA et al., Evaluation of porogen factors for the preparation of ion imprinted polymer monoliths used in mercury removal.
PLoS ONE, 13, (4), ArticleNoe0195546-(2018)
   

Mohammad SG

Kamel AH et al., Survey on the Integration of Molecularly Imprinted Polymers as Artificial Receptors in Potentiometric Transducers for pharmaceutical Drugs.
International Journal of Electrochemical Science, 14, 2085-2124, (2019)
   

Mohammad ST

Malihe KS et al., Magnetite molecularly imprinted nanoparticles for selective detection of phenol in wastewater samples followed by high performance liquid chromatography.
Indian Journal of Scientific Research, 5, (1), 362-368, (2014)
   

Mohammad-Khah A

Ansari R et al., A solid state Cr(VI) ion-selective electrode based on polypyrrole.
Microchimica Acta, 178, (1), 71-79, (2012)
   

Majdi M et al., Determination of Dexamethasone disodium phosphate using potentiometric sensors based on molecularly imprinted polymer in flow injection and batch systems.
Analytical and Bioanalytical Electrochemistry, 13, (1), 139-159, (2021)
   

Mohammadhosseini M

Hashemi-Moghaddam H et al., Preparation of molecularly imprinted polymers on the surface of optical fiber for HS-solid-phase microextraction of phenol.
Separation Science and Technology, 52, (11), 1826-1834, (2017)
   

Mohammadi A

Javanbakht M et al., A Biomimetic Potentiometric Sensor Using Molecularly Imprinted Polymer for the Cetirizine Assay in Tablets and Biological Fluids.
Electroanalysis, 20, (18), 2023-2030, (2008)
   

Javanbakht M et al., Molecularly imprinted polymer based potentiometric sensor for the determination of hydroxyzine in tablets and biological fluids.
Analytica Chimica Acta, 612, (1), 65-74, (2008)
   

Javanbakht M et al., Molecularly Imprinted Polymers for Selective Solid-Phase Extraction of Verapamil from Biological Fluids and Human Urine.
Current Pharmaceutical Analysis, 5, (3), 269-276, (2009)
   

Mohammadi A et al., Synthesis of Molecularly Imprinted Polymer for Selective Solid-Phase Extraction of Salbutamol from Urine Samples.
Asian Journal of Chemistry, 21, (4), 2875-2880, (2009)
   

Esfandyari-Manesh M et al., Dipyridamole recognition and controlled release by uniformly sized molecularly imprinted nanospheres.
Materials Science and Engineering: C, 31, (8), 1692-1699, (2011)
   

Arabzadeh N et al., Synthesis, characterization, and application of nano-molecularly imprinted polymer for fast solid-phase extraction of tartrazine from water environment.
Desalination and Water Treatment, 54, (9), 2452-2460, (2015)
   

Ashouri N et al., Synthesis of a new ion-imprinted polymer and its characterization for the selective extraction and determination of nickel ions in aqueous solutions.
Desalination and Water Treatment, 56, (8), 2135-2144, (2015)
   

Abdollahi E et al., Molecular Recognition Ability of Molecularly Imprinted Polymer Nano- and Micro-Particles by Reversible Addition-Fragmentation Chain Transfer Polymerization.
Polymer Reviews, 56, (4), 557-583, (2016)
   

Abdollahi E et al., Synthesis of a nano molecularly imprinted polymeric sorbent for solid phase extraction and determination of phenytoin in plasma, urine, and wastewater by HPLC.
RSC Advances, 6, (45), 39095-39105, (2016)
   

Arabzadeh N et al., Enhanced photodegradation of hazardous tartrazine by composite of nanomolecularly imprinted polymer-nanophotocatalyst with high efficiency.
Desalination and Water Treatment, 57, (7), 3142-3151, (2016)
   

Ashouri N et al., A nanostructure ion-imprinted polymer for the selective separation and determination of copper ions in aqueous solutions.
Desalination and Water Treatment, 57, (44), 20867-20876, (2016)
   

Ashouri N et al., Preparation of a new nanoparticle Cd(II)-imprinted polymer and its application for selective separation of cadmium(II) ions from aqueous solutions and determination via inductively coupled plasma optical emission spectrometry.
Desalination and Water Treatment, 57, (30), 14280-14289, (2016)
   

Esfandyari-Manesh M et al., Paclitaxel molecularly imprinted polymer-PEG-folate nanoparticles for targeting anticancer delivery: Characterization and cellular cytotoxicity.
Materials Science and Engineering: C, 62, 626-633, (2016)
   

Yaripour S et al., Electromembrane extraction of tartrazine from food samples: Effects of nano-sorbents on membrane performance.
Journal of Separation Science, 39, (13), 2642-2651, (2016)
   

Abdollahi E et al., Synthesis of new molecularly imprinted polymer via reversible addition fragmentation transfer polymerization as a drug delivery system.
Polymer, 143, 245-257, (2018)
   

Arabzadeh N et al., Green synthesis and application of nanomagnetic molecularly imprinted polymerfor fast solid-phase extraction of brilliant blue FCF from real samples.
Journal of Polymer Research, 26, (1), Article8-(2018)
   

Arabzadeh N et al., Construction of a TiO2-Fe3O4-decorated molecularly imprinted polymer nanocomposite for tartrazine degradation: Response surface methodology modeling and optimization.
Journal of the Chinese Chemical Society, 66, (5), 474-483, (2019)
   

Yaripour S et al., Electromembrane extraction of phenytoin from biological fluids: A survey on the effects of molecularly imprinted polymer and carbon nanotubes on extraction efficiency.
Microchemical Journal, 156, Article104800-(2020)
   

Mohammadi M

Shamsipur M et al., Silver ion imprinted polymer nanobeads based on a aza-thioether crown containing a 1, 10-phenanthroline subunit for solid phase extraction and for voltammetric and potentiometric silver sensors.
Analytica Chimica Acta, 852, 223-235, (2014)
   

Mohammadi N

Attaran AM et al., Molecularly Imprinted Solid-Phase Extraction for Selective Trace Analysis of Trifluoperazine.
Journal of Chromatographic Science, 52, (7), 730-738, (2014)
   

Mohammadi R

Berghaus M et al., Productive encounter: molecularly imprinted nanoparticles prepared using magnetic templates.
Chemical Communications, 50, (64), 8993-8996, (2014)
   

Picca RA et al., Book chapter, Novel Format of Molecularly Imprinted Polymers for the Development of Electrochemical Sensors, 
In: Sensors, Baldini F, D'Amico A, Di Natale C, Siciliano P, Seeber R, De Stefano L, Bizzarri R, Andò B (Eds.) Springer: New York, 165-169, (2014)
   

Introna B et al., Proceeding, Electrochemical sensor for Serotonin based on a composite made of core-shell molecularly imprinted polymer nanoparticles and polyethilenedioxythiophene, 
1-4, (2015)
   

Shinde S et al., Sialic Acid-Imprinted Fluorescent Core-Shell Particles for Selective Labeling of Cell Surface Glycans.
Journal of the American Chemical Society, 137, (43), 13908-13912, (2015)
   

Mohammadi S

Esfandyari-Manesh M et al., Dipyridamole recognition and controlled release by uniformly sized molecularly imprinted nanospheres.
Materials Science and Engineering: C, 31, (8), 1692-1699, (2011)
   

Javanbakht M et al., Molecularly imprinted polymer microspheres with nanopore cavities prepared by precipitation polymerization as new carriers for the sustained release of dipyridamole.
Journal of Applied Polymer Science, 119, (3), 1586-1593, (2011)
   

Javanbakht M et al., Synthesis and application of molecularly imprinted polymers for solid-phase extraction of dipyridamole from complex biological fluids.
Journal of Liquid Chromatography & Related Technologies, 35, (19), 2669-2684, (2012)
   

Mohammadi T

Zarghami S et al., Diffusive transport of Cu(II) ions through thin ion imprinted polymeric membranes.
Chemical Papers, 68, (10), 1325-1331, (2014)
   

Zarghami S et al., Cu(II) removal enhancement from aqueous solutions using ion-imprinted membrane technique.
Chemical Papers, 68, (6), 809-815, (2014)
   

Zarghami S et al., Adsorption Behavior of Cu(II) Ions on Crosslinked Chitosan/Polyvinyl Alcohol Ion Imprinted Membrane.
Journal of Dispersion Science and Technology, 36, (2), 190-195, (2015)
   

Mohammadi Toudeshki R

Mohammadi Toudeshki R et al., Chemiluminescence determination of furazolidone in poultry tissues and water samples after selective solid phase microextraction using magnetic molecularly imprinted polymers.
New Journal of Chemistry, 42, (13), 10751-10760, (2018)
   

Mohammadi Toudeshki R et al., Hollow fiber reinforced with molecularly imprinted polymer supported on multiwalled carbon nanotubes for microextraction of furazolidone in real samples prior to its spectrophotometric determination.
Journal of the Iranian Chemical Society, 16, (9), 2003-2010, (2019)
   

Mohammadi V

Mohammadi V et al., Direct molecular imprinting technique to synthesize coated electrospun nanofibers for selective solid-phase microextraction of chlorpyrifos.
Microchimica Acta, 186, (8), Article524-(2019)
   

Mohammadian A

Vardini MT et al., Proceeding, Synthesis and Application of an Ion Imprinted Polymer Material for Preconcentration and Determination of Traces of Pb2+ Ions, 
(2011)
   

Mohammadinejad A

Mohsenzadeh MS et al., Simple and selective analysis of different antibiotics in milk using molecularly imprinted polymers: a review.
Food Additives & Contaminants: Part A, 35, (10), 1959-1974, (2018)
   

Soheilifar S et al., Application of molecularly imprinted polymer in solid-phase microextraction coupled with HPLC-UV for analysis of dibutyl phthalate in bottled water and soft drink samples.
Journal of Liquid Chromatography & Related Technologies, 41, (9), 552-560, (2018)
   

Negarian M et al., Preparation, evaluation and application of core-shell molecularly imprinted particles as the sorbent in solid-phase extraction and analysis of lincomycin residue in pasteurized milk.
Food Chemistry, 288, 29-38, (2019)
   

Eidi S et al., Selective isolation of sesquiterpene coumarins from asafoetida using dummy molecularly imprinted solid phase extraction method.
Journal of Chromatography B, 1138, Article121943-(2020)
   

Mohammadinejad A et al., Preparation, evaluation, and application of dummy molecularly imprinted polymer for analysis of hesperidin in lime juice.
Journal of Separation Science, 44, (7), 1490-1500, (2021)
   

Mohammadniaei M

Naseri M et al., The Use of Aptamers and Molecularly Imprinted Polymers in Biosensors for Environmental Monitoring: A Tale of Two Receptors.
Chemosensors, 8, (2), ArticleNo32-(2020)
   

Mohammadpour AH

Rahmani A et al., Haloperidol imprinted polymer: preparation, evaluation, and application for drug assay in brain tissue.
Analytical and Bioanalytical Chemistry, 406, (29), 7729-7739, (2014)
   

Habibi-Khorasani M et al., Development of solid-phase microextraction coupled with liquid chromatography for analysis of tramadol in brain tissue using its molecularly imprinted polymer.
Biomedical Chromatography, 31, (2), ArticleNoe3787-(2017)
   

Mohammadsadegh S

Khosrokhavar R et al., Screen-printed carbon electrode (SPCE) modified by molecularly imprinted polymer (MIP) nanoparticles and graphene nanosheets for determination of sertraline antidepressant drug.
Microchemical Journal, 159, Article105348-(2020)
   

Mohammadzadeh A

Abdollahiyan P et al., Chemical binding of molecular-imprinted polymer to biotinilated antibody: Utilization of molecular imprinting polymer as intelligent synthetic biomaterials toward recognition of carcinoma embryonic antigen in human plasma sample.
Journal of Molecular Recognition, 34, (9), Article_e2897-(2021)
   

Mohammadzadeh Pakdel P

Mohammadzadeh Pakdel P et al., Review on recent progress in chitosan-based hydrogels for wastewater treatment application.
Carbohydrate Polymers, 201, 264-279, (2018)
   

Mohammed HA

Monier M et al., Synthesis and characterization of uranyl ion-imprinted microspheres based on amidoximated modified alginate.
International Journal of Biological Macromolecules, 75, 354-363, (2015)
   

Mohammed YY

Kamel AH et al., Survey on the Integration of Molecularly Imprinted Polymers as Artificial Receptors in Potentiometric Transducers for pharmaceutical Drugs.
International Journal of Electrochemical Science, 14, 2085-2124, (2019)
   

Mohan AMV

Aswini KK et al., Molecularly imprinted polymer based electrochemical detection of L-cysteine at carbon paste electrode.
Materials Science and Engineering: C, 37, 321-326, (2014)
   

Mohan Rao LJ

Upadhyay R et al., An Outlook on Chlorogenic Acids - Occurrence, Chemistry, Technology, and Biological Activities.
Critical Reviews in Food Science and Nutrition, 53, (9), 968-984, (2012)
   

Mohanan VMA

Mohanan VMA et al., Selective electrochemical detection of dopamine based on molecularly imprinted poly(5-amino 8-hydroxy quinoline) immobilized reduced graphene oxide.
Journal of Materials Science, 53, (15), 10627-10639, (2018)
   

Mohapatra P

Sahu D et al., Nano silver imprinted polyvinyl alcohol nanocomposite thin films for Hg2+ sensor.
Sensors and Actuators B: Chemical, 246, 96-107, (2017)
   

Mohapatra S

Wang CY et al., Preparation and Characterization of Molecularly Imprinted Polymeric Nanoparticles for Atrial Natriuretic Peptide (ANP).
Advanced Functional Materials, 21, (23), 4423-4429, (2011)
   

Mohapatra S et al., Fabrication of flexible and economical plasmonic biosensor using gold nanograting imprinted on hot-melt adhesive film for label-free sensing of immunoglobulin proteins.
Sensors and Actuators B: Chemical, 301, Article127070-(2019)
   

Mohd Din AT

Mohamed Idris Z et al., Amino-functionalised silica-grafted molecularly imprinted polymers for chloramphenicol adsorption.
Journal of Environmental Chemical Engineering, 8, (5), Article103981-(2020)
   

Mohd Noor A

Halim NFAB et al., Proceeding, Highly sensitive reduce graphene oxide - Molecular imprinted polymer organic thin film transistor for serine detection, 
284-287, (2016)
   

Mohd Suah FB

Yusof NF et al., Fabrication and binding characterization of ion imprinted polymers for highly selective Co2+ ions in an aqueous medium.
Journal of Environmental Chemical Engineering, 7, (2), Article103007-(2019)
   

Mohebali A

Mohebali A et al., Synthesis and characterization of poly(methacrylic acid)-based molecularly imprinted polymer nanoparticles for controlled release of trinitroglycerin.
Polymers for Advanced Technologies, 27, (9), 1164-1171, (2016)
   

Mohebali A et al., Isosorbide dinitrate template-based molecularly imprinted poly(methacrylic acid) nanoparticles: effect of initiator concentration on morphology and physicochemical properties.
Chemical Papers, 72, (12), 3005-3016, (2018)
   

Mohebbi-Kalhori D

Mousavi-Qeydari SR et al., A mesoporous melamine/chitosan/activated carbon biocomposite: Preparation, characterization and its application for Ni (II) uptake via ion imprinting.
International Journal of Biological Macromolecules, 188, 126-136, (2021)
   

Mohit

Poonam D et al., Therapeutic contact lens: a recent review.
Journal of Drug Discovery and Therapeutics, 1, (3), 36-39, (2013)
   

Mohiuddin I

Mohiuddin I et al., Preparation and evaluation of a porous molecularly imprinted polymer for selective recognition of the antiepileptic drug carbamazepine.
Environmental Research, 176, Article108580-(2019)
   

Mohiuddin I et al., Porous molecularly-imprinted polymer for detecting diclofenac in aqueous pharmaceutical compounds.
Chemical Engineering Journal, 382, Article123002-(2020)
   

Mohr GJ

Mohr GJ et al., Reversible chemical reactions as the basis for optical sensors used to detect amines, alcohols and humidity.
Journal of Materials Chemistry, 9, (9), 2259-2264, (1999)
   

Mohr GJ, New chromoreactands for the detection of aldehydes, amines and alcohols.
Sensors and Actuators B: Chemical, 90, (1-3), 31-36, (2003)
   

Mohr GJ, Chromo- and fluororeactands: Indicators for detection of neutral analytes by using reversible covalent-bond chemistry.
Chemistry - A European Journal, 10, (5), 1082-1090, (2004)
   

Mohr GJ, Covalent bond formation as an analytical tool to optically detect neutral and anionic analytes.
Sensors and Actuators B: Chemical, 107, (1), 2-13, (2005)
   

Gräfe A et al., Optical sensor materials for the detection of amines in organic solvents.
Analytica Chimica Acta, 565, (1), 42-47, (2006)
   

Suriyanarayanan S et al., Book chapter, Chemosensors Based on Molecularly Imprinted Polymers, 
In: Molecular Imprinting, Haupt K (Ed.) Springer: Berlin / Heidelberg, 165-265, (2012)
   

Mohr S

Zourob M et al., A micro-reactor for preparing uniform molecularly imprinted polymer beads.
Lab on a Chip, 6, (2), 296-301, (2006)
   

Mohsenzadeh F

Darabi HR et al., Synthesis and evaluation of a molecularly imprinted polymer nanospheres for the effective recognition of azithromycin.
Drug Discovery International, 1, (1), Art 19-(2012)
   

Mohsenzadeh MS

Abbasi Ghaeni F et al., Preparation of dual-template molecularly imprinted nanoparticles for organophosphate pesticides and their application as selective sorbents for water treatment.
Separation Science and Technology, 53, (16), 2517-2526, (2018)
   

Mohsenzadeh MS et al., Simple and selective analysis of different antibiotics in milk using molecularly imprinted polymers: a review.
Food Additives & Contaminants: Part A, 35, (10), 1959-1974, (2018)
   

Eidi S et al., Selective isolation of sesquiterpene coumarins from asafoetida using dummy molecularly imprinted solid phase extraction method.
Journal of Chromatography B, 1138, Article121943-(2020)
   

Mohwald H

Caruso F et al., Nanoengineering of inorganic and hybrid hollow spheres by colloidal templating.
Science, 282, (5391), 1111-1114, (1998)
   

Donath E et al., Novel hollow polymer shells by colloid-templated assembly of polyelectrolytes.
Angewandte Chemie International Edition, 37, (16), 2201-2205, (1998)
   

Caruso F et al., Production of hollow microspheres from nanostructured composite particles.
Chemistry of Materials, 11, (11), 3309-3314, (1999)
   

Rajkumar R et al., Development of fructosyl valine binding polymers by covalent imprinting.
Biosensors and Bioelectronics, 22, (12), 3318-3325, (2007)
   

Rajkumar R et al., Synthesis and thermometric application of a molecularly imprinted polymer for fructosyl valine.
Tissue Engineering, 13, (4), 889-890, (2007)
   

Rajkumar R et al., Thermometric MIP sensor for fructosyl valine.
Biosensors and Bioelectronics, 23, (7), 1195-1199, (2008)
   

Moirangthem M

Moirangthem M et al., An Optical Sensor Based on a Photonic Polymer Film to Detect Calcium in Serum.
Advanced Functional Materials, 26, (8), 1154-1160, (2016)
   

Moirangthem RS

Mohapatra S et al., Fabrication of flexible and economical plasmonic biosensor using gold nanograting imprinted on hot-melt adhesive film for label-free sensing of immunoglobulin proteins.
Sensors and Actuators B: Chemical, 301, Article127070-(2019)
   

Moisan L

Dalko PI et al., In the golden age of organocatalysis.
Angewandte Chemie International Edition, 43, (39), 5138-5175, (2004)
   

Moise G

Patachia S et al., Molecularly Imprinted Poly (Vinyl Alcohol) Films for the Selective Absorption of Glycyrrhizinic Acid from Aqueous Solutions.
Environmental Engineering and Management Journal, 8, (4), 663-668, (2009)
   

Mojarrab M

Nezhadali A et al., Computational study and multivariate optimization of hydrochlorothiazide analysis using molecularly imprinted polymer electrochemical sensor based on carbon nanotube/polypyrrole film.
Sensors and Actuators B: Chemical, 190, 829-837, (2014)
   

Nezhadali A et al., Fabrication of an electrochemical molecularly imprinted polymer triamterene sensor based on multivariate optimization using multi-walled carbon nanotubes.
Journal of Electroanalytical Chemistry, 744, 85-94, (2015)
   

Nezhadali A et al., 1, 4-dihydroxyanthraquinone electrochemical sensor based on molecularly imprinted polymer using multi-walled carbon nanotubes and multivariate optimization method.
Talanta, 146, 525-532, (2016)
   

Nezhadali A et al., Computational design and multivariate optimization of an electrochemical metoprolol sensor based on molecular imprinting in combination with carbon nanotubes.
Analytica Chimica Acta, 924, 86-98, (2016)
   

Nezhadali A et al., Nanogram/mL detection of nortriptyline: Preparation of a molecularly imprinted polymer for spectrophotometric determination of nortriptyline based on multivariate optimization methods.
Journal of Separation Science, 42, (22), 3479-3486, (2019)
   

Iranmanesh E et al., A new molecularly imprinted polymer for selective extraction and pre-concentration of guaifenesin in different samples: Adsorption studies and kinetic modeling.
Journal of Separation Science, 43, (6), 1164-1172, (2020)
   

Mojica ER

Mojica ER et al., Tetracycline speciation during molecular imprinting in xerogels results in class-selective binding.
Analyst, 136, (4), 749-755, (2011)
   

Mojica ER et al., Synthesis and evaluation of tetracycline imprinted xerogels: Comparison of experiment and computational modeling.
Analytica Chimica Acta, 684, (1-2), 72-80, (2011)
   

Wach A et al., Determination of the Structures of Molecularly Imprinted Polymers and Xerogels Using an Automated Stochastic Approach.
Analytical Chemistry, 85, (18), 8577-8584, (2013)
   

Mojica ERE

Mojica ERE, Screening of different computational models for the preparation of sol-gel imprinted materials.
Journal of Molecular Modeling, 19, (9), 3911-3923, (2013)
   

Pace SJ et al., Use of computational modeling in preparation and evaluation of surface imprinted xerogels for binding tetracycline.
Microchimica Acta, 182, (1-2), 69-76, (2015)
   

Mokgadi J

Batlokwa BS et al., Optimal Template Removal from Molecularly Imprinted Polymers by Pressurized Hot Water Extraction.
Chromatographia, 73, (5), 589-593, (2011)
   

Batlokwa BS et al., A Novel Molecularly Imprinted Polymer for the Selective Removal of Chlorophyll from Heavily Pigmented Green Plant Extracts prior to Instrumental Analysis.
Journal of Chemistry, 2013, Article ID 540240-(2013)
   

Mokgadi J et al., Pressurized hot water extraction coupled to molecularly imprinted polymers for simultaneous extraction and clean-up of pesticides residues in edible and medicinal plants of the Okavango Delta, Botswana.
Molecular Imprinting, 1, (1), 55-64, (2013)
   

Mokhtar M

Mokhtar M et al., Preparation and characterization of ion selective membrane and its application for Cu2+ removal.
Journal of Industrial and Engineering Chemistry, 60, 475-484, (2018)
   

Mokhtari A

Mokhtari A et al., A molecularly imprinted polymerized high internal phase emulsion adsorbent for sensitive chemiluminescence determination of clopidogrel.
Spectrochimica Acta Part A-Molecular and Biomolecular Spctroscopy, 265, Article120371-(2022)
   

Mokhtari P

Mokhtari P et al., Water compatible molecularly imprinted polymer for controlled release of riboflavin as drug delivery system.
European Polymer Journal, 118, 614-618, (2019)
   

Mokhtari Z

Mokhtari Z et al., Evaluation of molecular imprinted polymerized methylene blue/aptamer as a novel hybrid receptor for Cardiac Troponin I (cTnI) detection at glassy carbon electrodes modified with new biosynthesized ZnONPs.
Sensors and Actuators B: Chemical, 320, Article128316-(2020)
   

Mokkapati VRSS

Avaz S et al., Graphene based nanosensor for aqueous phase detection of nitroaromatics.
RSC Advances, 7, (41), 25519-25527, (2017)
   

Mokni1 M

Mokni1 M et al., Proceeding, Prime importance of the supporting electrolyte in the realization of molecularly imprinted polymers, 
(2019)
   

Mokwa W

Bender S et al., Investigations on temperature controlled monolithic integrated surface acoustic wave (SAW) gas sensors.
Sensors and Actuators B: Chemical, 93, (1-3), 164-168, (2003)
   

Mol R

de Boer T et al., Spherical molecularly imprinted polymer particles: A promising tool for molecular recognition in capillary electrokinetic separations.
Electrophoresis, 23, (9), 1296-1300, (2002)
   

Molaei K

Ebrahimzadeh H et al., Molecularly imprinted nano particles combined with miniaturized homogenous liquid-liquid extraction for the selective extraction of loratadine in plasma and urine samples followed by high performance liquid chromatography-photo diode array detection.
Analytica Chimica Acta, 767, 155-162, (2013)
   

Ebrahimzadeh H et al., Determination of haloperidol in biological samples using molecular imprinted polymer nanoparticles followed by HPLC-DAD detection.
International Journal of Pharmaceutics, 453, (2), 601-609, (2013)
   

Bagheri H et al., Magnetic molecularly imprinted composite for the selective solid-phase extraction of p-aminosalicylic acid followed by high-performance liquid chromatography with ultraviolet detection.
Journal of Separation Science, 39, (21), 4166-4174, (2016)
   

Moldes AB

Cela-Pérez MC et al., Selective removal of ATP degradation products from food matrices II: Rapid screening of hypoxanthine and inosine by molecularly imprinted matrix solid-phase dispersion for evaluation of fish freshness.
Talanta, 135, 58-66, (2015)
   

Moldoveanu S

Moldoveanu S et al., Book chapter, Solid-Phase Extraction, 
In: Modern Sample Preparation for Chromatography, David SMV (Ed.) Elsevier: Amsterdam, 191-286, (2015)
   

Moldoveanu SC

Moldoveanu SC, Solutions and challenges in sample preparation for chromatography.
Journal of Chromatographic Science, 42, (1), 1-14, (2004)
   

Molefe ED

Pakade VE et al., Quantitative determination of trace concentrations of quercetin from prickly pear skin complex sample extracts by application of molecularly imprinted polymers.
Journal of Environmental Chemical Engineering, 5, (1), 1186-1195, (2017)
   

Molina J

Moreno-Bondi MC et al., Proceeding, Molecularly imprinted polymers as selective recognition elements for optical sensors based on fluorescent measurements, 
975-978, (2003)
   

Molina-Díaz A

Molina-Díaz A et al., Book chapter, Luminescence Detection in Flow Analysis, 
In: Advances in Flow Analysis, Trojanowicz M (Ed.) Wiley-VCH: Weinheim, Ch. 13, 343-393, (2008)
   

Molinelli A

Molinelli A et al., Advanced solid phase extraction using molecularly imprinted polymers for the determination of quercetin in red wine.
Journal of Agricultural and Food Chemistry, 50, (7), 1804-1808, (2002)
   

Weiss R et al., Molecular imprinting and solid phase extraction of flavonoid compounds.
Bioseparation, 10, (6), 379-387, (2002)
   

Krska R et al., Advances in the analysis of mycotoxins and its quality assurance.
Food Additives and Contaminants, 22, (4), 345-353, (2005)
   

Molinelli A et al., Analyzing the mechanisms of selectivity in biomimetic self-assemblies via IR and NMR spectroscopy of prepolymerization solutions and molecular dynamics simulations.
Analytical Chemistry, 77, (16), 5196-5204, (2005)
   

Molinelli A et al., Book chapter, Molecularly imprinted polymers for biomolecular recognition, 
In: Protein Nanotechnology: Protocols, Instrumentation, and Applications, Vo-Dinh T (Ed.) Humana Press: Ch. 11, 243-254, (2005)
   

O’Mahony J et al., Towards the rational development of molecularly imprinted polymers: 1H NMR studies on hydrophobicity and ion-pair interactions as driving forces for selectivity.
Biosensors and Bioelectronics, 20, (9), 1884-1893, (2005)
   

O’Mahony J et al., Imprinted Polymeric Materials. Insight into the Nature of Prepolymerization Complexes of Quercetin Imprinted Polymers.
Analytical Chemistry, 78, (17), 6187-6190, (2006)
   

O’Mahony J et al., Anatomy of a successful imprint: Analysing the recognition mechanisms of a molecularly imprinted polymer for quercetin.
Biosensors and Bioelectronics, 21, (7), 1383-1392, (2006)
   

Wei ST et al., Molecularly imprinted micro and nanospheres for the selective recognition of 17[beta]-estradiol.
Biosensors and Bioelectronics, 21, (10), 1943-1951, (2006)
   

Moliner-Martinez Y

Moliner-Martinez Y et al., Recent advances of in-tube solid-phase microextraction.
TrAC Trends in Analytical Chemistry, 71, 205-213, (2015)
   

Molins-Legua C

Moliner-Martinez Y et al., Recent advances of in-tube solid-phase microextraction.
TrAC Trends in Analytical Chemistry, 71, 205-213, (2015)
   

Mollaei S

Sadeghi HB et al., Potentiometric Sensing of Lamotrigine Based on Molecularly Imprinted Polymers.
Electroanalysis, 23, (11), 2716-2723, (2011)
   

Mollazadeh M

Najafi M et al., Selective recognition of chloroacetic acids by imprinted polyaniline film.
Journal of Applied Polymer Science, 121, (1), 292-298, (2011)
   

Molochnikov LS

Kabanov VA et al., An EPR study of copper(II) complexes with structured polymeric sorbents.
Polymer Science U. S. S. R., 28, (11), 2736-2742, (1986)
   

Molochnikov LS et al., Synthesis and study of prearranged for nickel sorbents on the basis of polyethylene polyamines.
Polymer Science U. S. S. R., 31, (5), 1168-1172, (1989)
   

Molochnikov LS et al., Thermochemical properties of polyvinylpyridine complex-forming sorbents for metals sorption.
Vysokomolekulyarnye Soedineniya Seriya B, 32, (12), 945-947, (1990)
   

Molochnikov LS et al., Coordination of Cu(II) and Ni(II) in polymers imprinted so as to optimize amine chelate formation.
Polymer, 44, (17), 4805-4815, (2003)
   

Moloney M

Kinsella B et al., Current trends in sample preparation for growth promoter and veterinary drug residue analysis.
Journal of Chromatography A, 1216, (46), 7977-8015, (2009)
   

O’Mahony J et al., Design and implementation of an imprinted material for the extraction of the endocrine disruptor bisphenol A from milk.
Journal of Chromatography B, 931, 164-169, (2013)
   

Molouk AFS

Abdallah AB et al., Selective and sensitive electrochemical sensors based on an ion imprinting polymer and graphene oxide for the detection of ultra-trace Cd(II) in biological samples.
RSC Advances, 11, (49), 30771-30780, (2021)
   

Momeneh H

Momeneh H et al., Mycophenolate mofetil sensor based on molecularly imprinted polymer/multi-walled carbon nanotubes modified carbon paste electrode.
Analytical Biochemistry, 557, 97-103, (2018)
   

Momtaz S

Hassani S et al., Biosensors and their applications in detection of organophosphorus pesticides in the environment.
Archives of Toxicology, 91, (1), 109-130, (2017)
   

Monaci L

Monaci L et al., Determination of ochratoxin A in foods: state-of-the-art and analytical challenges.
Analytical and Bioanalytical Chemistry, 378, (1), 96-103, (2004)
   

Monageng SM

Pakade VE et al., Removal of Ni(II) Ions from Aqueous Solutions Using Ion Imprinted Polymer Prepared from Dual Vinyl Monomers.
Asian Journal of Scientific Research, 9, (4), 131-142, (2016)
   

Monasterio RP

Panjan P et al., Development of a folic acid molecularly imprinted polymer and its evaluation as a sorbent for dispersive solid-phase extraction by liquid chromatography coupled to mass spectrometry.
Journal of Chromatography A, 1576, 26-33, (2018)
   

Monbaliu S

De Smet D et al., Synthesis and application of a T-2 toxin imprinted polymer.
Journal of Chromatography A, 1217, (17), 2879-2886, (2010)
   

Moncer F

Moncer F et al., Electrochemical sensor based on MIP for highly sensitive detection of 5-hydroxyindole-3-acetic acid carcinoid cancer biomarker in human biological fluids.
Analytica Chimica Acta, 1181, Article338925-(2021)
   

Mondal R

Mondal R et al., General design of chemosensors based on fluorescent hybrid molecularly imprinted conjugated polymers.
Abstracts of Papers of the American Chemical Society, 235, (ORGN), 554-(2008)
   

Mondal R et al., Thin-film molecularly imprinted chemosensors based on fluorescent conjugated polymers.
Abstracts of Papers of the American Chemical Society, 241, (POLY), 70-(2011)
   

Monflier E

Hapiot F et al., Cyclodextrins and their applications in aqueous-phase metal-catalyzed reactions.
Comptes Rendus Chimie, 14, (2-3), 149-166, (2011)
   

Mong GM

Harvey SD et al., Preparation and evaluation of spore-specific affinity-augmented bio-imprinted beads.
Analytical and Bioanalytical Chemistry, 386, (2), 211-219, (2006)
   

Monier M

Monier M et al., Preparation of molecularly imprinted cross-linked chitosan/glutaraldehyde resin for enantioselective separation of l-glutamic acid.
International Journal of Biological Macromolecules, 47, (2), 207-213, (2010)
   

Monier M et al., Preparation of cross-linked chitosan/glyoxal molecularly imprinted resin for efficient chiral resolution of aspartic acid isomers.
Biochemical Engineering Journal, 51, (3), 140-146, (2010)
   

Monier M et al., Synthesis and characterization of ion-imprinted chelating fibers based on PET for selective removal of Hg2+.
Chemical Engineering Journal, 221, 452-460, (2013)
   

Monier M et al., Synthesis and characterization of ion-imprinted resin based on carboxymethyl cellulose for selective removal of UO22+.
Carbohydrate Polymers, 97, (2), 743-752, (2013)
   

Monier M et al., Preparation of molecularly imprinted resin based on chitosan for chiral recognition of S-mandelic acid.
International Journal of Biological Macromolecules, 55, 207-213, (2013)
   

Monier M et al., Synthesis and characterization of selective thiourea modified Hg(II) ion-imprinted cellulosic cotton fibers.
Carbohydrate Polymers, 106, 49-59, (2014)
   

Monier M et al., Selective extraction of uranyl ions using ion-imprinted chelating microspheres.
Journal of Colloid and Interface Science, 423, 113-122, (2014)
   

Monier M et al., Preparation and characterization of selective phenyl thiosemicarbazide modified Au(III) ion-imprinted cellulosic cotton fibers.
Journal of Applied Polymer Science, 131, (18), Article No 40769-(2014)
   

Monier M et al., Surface ion-imprinted amino-functionalized cellulosic cotton fibers for selective extraction of Cu(II) ions.
International Journal of Biological Macromolecules, 81, 736-746, (2015)
   

Monier M et al., Synthesis and application of ion-imprinted resin based on modified melamine-thiourea for selective removal of Hg(II).
Polymer International, 64, (10), 1465-1474, (2015)
   

Monier M et al., Synthesis and characterization of ion-imprinted resin for selective removal of UO2(II) ions from aqueous medium.
Journal of Molecular Recognition, 28, (5), 306-315, (2015)
   

Monier M et al., Synthesis and characterization of uranyl ion-imprinted microspheres based on amidoximated modified alginate.
International Journal of Biological Macromolecules, 75, 354-363, (2015)
   

Monier M et al., Preparation of l-tryptophan imprinted microspheres based on carboxylic acid functionalized polystyrene.
Journal of Colloid and Interface Science, 445, 371-379, (2015)
   

Monier M et al., Ion-imprinted modified chitosan resin for selective removal of Pd(II) ions.
Journal of Colloid and Interface Science, 469, 344-354, (2016)
   

Monier M et al., Reply to comments on 'Synthesis and application of ion-imprinted resin based on modified melamine-thiourea for selective removal of Hg(II)'.
Polymer International, 65, (7), 847-848, (2016)
   

Monier M et al., Fabrication of Au(III) ion-imprinted polymer based on thiol-modified chitosan.
International Journal of Biological Macromolecules, 105, (Part 1), 777-787, (2017)
   

Alatawi RAS et al., Chiral separation of (±)-methamphetamine racemate using molecularly imprinted sulfonic acid functionalized resin.
Journal of Colloid and Interface Science, 531, 654-663, (2018)
   

Monier M et al., Synthesis and evaluation of enantio-selective l-histidine imprinted salicylic acid functionalized resin.
Reactive and Functional Polymers, 128, 104-113, (2018)
   

Monier M et al., Surface molecularly imprinted amino-functionalized alginate microspheres for enantio-selective extraction of l-ascorbic acid.
Carbohydrate Polymers, 195, 652-661, (2018)
   

Monier M et al., Preparation of ruthenium (III) ion-imprinted beads based on 2-pyridylthiourea modified chitosan.
Journal of Colloid and Interface Science, 513, 266-278, (2018)
   

Monier M et al., Synthesis of azo-functionalized ion-imprinted polymeric resin for selective extraction of nickel(II) ions.
Polymer International, 67, (8), 1035-1045, (2018)
   

Bukhari AAH et al., Surface molecular imprinting of nylon fibers for chiral recognition of d-phenyllactic acid.
Polymer International, 68, (8), 1460-1467, (2019)
   

Monier M et al., Synthesis of imprinted styrene-maleic acid functionalized resin for enantio-selective extraction of R-amphetamine.
Chemical Engineering Journal, 356, 693-701, (2019)
   

Alotaibi MR et al., Fabrication and investigation of gold (III) ion-imprinted functionalized silica particles.
Journal of Molecular Recognition, 33, (2), Article_e2813-(2020)
   

Elsayed NH et al., Diacetylmonoxine modified chitosan derived ion-imprinted polymer for selective solid-phase extraction of nickel (II) ions.
Reactive and Functional Polymers, 151, Article104570-(2020)
   

Monier M et al., Designing and characterization of copper (II) ion-imprinted adsorbent based on isatin functionalized chitosan.
International Journal of Biological Macromolecules, 155, 795-804, (2020)
   

Monier M et al., Preparation of functionalized ion-imprinted phenolic polymer for efficient removal of copper ions.
Polymer International, 69, (1), 31-40, (2020)
   

Alhawiti AS et al., Designing of amino functionalized imprinted polymeric resin for enantio-separation of (±)-mandelic acid racemate.
Reactive and Functional Polymers, 160, Article104828-(2021)
   

Elsayed NH et al., Thiosemicarbazide-modified/ion-imprinted phenolic resin for selective uptake of cadmium ions.
Materials Chemistry and Physics, 264, Article124433-(2021)
   

Moniri E

Ahmad Panahi H et al., Nickel Adsorption from Environmental Samples by Ion Imprinted Aniline -Formaldehyde Polymer.
Iranian Journal of Chemistry and Chemical Engineering, 31, (3), 35-44, (2012)
   

Panahi HA et al., Synthesis and characterization of new molecular imprinting poly[1-(N, N-bis-carboxymethyl)amino-3-allylglycerol-co-dimethylacrylamide] for selective sorption and determination of cefuroxime sodium in biological and pharmaceutical samples.
Reactive and Functional Polymers, 73, (1), 132-140, (2013)
   

Panahi HA et al., Fabrication of new drug imprinting polymer beads for selective extraction of naproxen in human urine and pharmaceutical samples.
International Journal of Pharmaceutics, 441, (1-2), 776-780, (2013)
   

Naraghi K et al., Ion imprinted activated carbon solid-phase extraction coupled to flame atomic absorption spectrometry for selective determination of lead ions in environmental samples.
Korean Journal of Chemical Engineering, 31, (10), 1818-1823, (2014)
   

Panahi HA et al., Selective extraction of clonazepam from human plasma and urine samples by molecularly imprinted polymeric beads.
Journal of Separation Science, 37, (6), 691-695, (2014)
   

Moniri E et al., Selective Solid-Phase Extraction of Zinc(II) from Environmental Water Samples Using Ion Imprinted Activated Carbon.
Journal of AOAC International, 98, (1), 206-212, (2015)
   

Panahi HA et al., Selective Sorption and Determination of Atenolol in Pharmaceutical and Biological Samples by Molecular Imprinting Using New Copolymer Beads as a Functional Matrix.
Journal of Liquid Chromatography & Related Technologies, 38, (2), 222-228, (2015)
   

Monk DJ

Monk DJ et al., Optical fiber-based biosensors.
Analytical and Bioanalytical Chemistry, 379, (7-8), 931-945, (2004)
   

Monreal C

Mastronardi E et al., Personalized Medicine for Crops? Opportunities for the Application of Molecular Recognition in Agriculture.
Journal of Agricultural and Food Chemistry, 66, (26), 6457-6461, (2018)
   

Monser L

Lagha A et al., A Molecularly Imprinted Polymer for the Selective Solid-Phase Extraction of Ibuprofen from Urine Samples.
The Open Chemical and Biomedical Methods Journal, 4, 7-13, (2011)
   

Lahsini R et al., Preparation and application of a molecularly imprinted polymer for determination of glibenclamide residues.
Acta Pharmceutica, 63, (2), 265-275, (2013)
   

Hrichi H et al., Gliclazide voltammetric sensor based on electropolymerized molecularly imprinted polypyrrole film onto glassy carbon electrode.
Sensors and Actuators B: Chemical, 204, 42-49, (2014)
   

Hrichi H et al., A novel electrochemical sensor based on electropolymerized molecularly imprinted poly(aniline-co-anthranilic acid) for sensitive detection of amlodipine.
Journal of Electroanalytical Chemistry, 805, 133-145, (2017)
   

Hrichi H et al., Selective Electrochemical Determination of Etoposide Using a Molecularly Imprinted Overoxidized Polypyrrole Coated Glassy Carbon Electrode.
International Journal of Electrochemistry, 2019, Article5394235-(2019)
   

Moncer F et al., Electrochemical sensor based on MIP for highly sensitive detection of 5-hydroxyindole-3-acetic acid carcinoid cancer biomarker in human biological fluids.
Analytica Chimica Acta, 1181, Article338925-(2021)
   

Montalti M

Zattoni A et al., Characterization of titanium dioxide nanoparticles imprinted for tyrosine by flow field-flow fractionation and spectrofluorimetric analysis.
Inorganica Chimica Acta, 360, (3), 1063-1071, (2007)
   

Montana L

Bossi AM et al., Fingerprint-Imprinted Polymer: Rational Selection of Peptide Epitope Templates for the Determination of Proteins by Molecularly Imprinted Polymers.
Analytical Chemistry, 84, (9), 4036-4041, (2012)
   

Montaseri H

Montaseri H et al., Molecularly imprinted polymer coated quantum dots for fluorescence sensing of acetaminophen.
Materials Today Communications, 17, 480-492, (2018)
   

Montauban C

Le Moullec S et al., Extraction of alkyl methylphosphonic acids from aqueous samples using a conventional polymeric solid-phase extraction sorbent and a molecularly imprinted polymer.
Journal of Chromatography A, 1139, (2), 171-177, (2007)
   

Montazeri L

Bonakdar S et al., Cell-Imprinted Substrates Modulate Differentiation, Redifferentiation, and Transdifferentiation.
ACS Applied Materials & Interfaces, 8, (22), 13777-13784, (2016)
   

Monteau F

Doué M et al., Molecularly imprinted polymer applied to the selective isolation of urinary steroid hormones: An efficient tool in the control of natural steroid hormones abuse in cattle.
Journal of Chromatography A, 1270, 51-61, (2012)
   

Monteiro JCS

Souza ID et al., Selective molecularly imprinted polymer combined with restricted access material for in-tube SPME/UHPLC-MS/MS of parabens in breast milk samples.
Analytica Chimica Acta, 932, 49-59, (2016)
   

Montejano HA

Torres JJ et al., Experimental and theoretical studies on the enantioselectivity of molecularly imprinted polymers prepared with a chiral functional monomer.
Journal of Chromatography A, 1266, 24-33, (2012)
   

Torres JJ et al., Characterization of Imprinted Microbeads Synthesized via Minisuspension Polymerization.
Macromolecular Materials And Engineering, 297, (4), 342-352, (2012)
   

Montelius L

Forchheimer D et al., Molecularly imprinted nanostructures by nanoimprint lithography.
Analyst, 135, (6), 1219-1223, (2010)
   

Forchheimer D et al., Molecularly selective nanopatterns using nanoimprint lithography: A label-free sensor architecture.
Journal of Vacuum Science & Technology B, 29, (1), Article No. 011021-(2011)
   

Chaudhary S et al., Controlled short-linkage assembly of functional nano-objects.
Applied Surface Science, 300, 22-28, (2014)
   

Kamra T et al., Implementation of Molecularly Imprinted Polymer Beads for Surface Enhanced Raman Detection.
Analytical Chemistry, 87, (10), 5056-5061, (2015)
   

Kamra T et al., Photoconjugation of Molecularly Imprinted Polymer Nanoparticles for Surface-Enhanced Raman Detection of Propranolol.
ACS Applied Materials & Interfaces, 7, (49), 27479-27485, (2015)
   

Kamra T et al., Covalent immobilization of molecularly imprinted polymer nanoparticles using an epoxy silane.
Journal of Colloid and Interface Science, 445, 277-284, (2015)
   

Kamra T et al., Covalent immobilization of molecularly imprinted polymer nanoparticles on a gold surface using carbodiimide coupling for chemical sensing.
Journal of Colloid and Interface Science, 461, 1-8, (2016)
   

Kamra T et al., Corrigendum to "Covalent immobilization of molecularly imprinted polymer nanoparticles on a gold surface using carbodiimide coupling for chemical sensing" [J. Colloid Interface Sci. 461 (2016) 1-8].
Journal of Colloid and Interface Science, 461, 444-445, (2016)
   

Montenegro MCBS

Almeida SAA et al., Sulphonamide-imprinted sol-gel materials as ionophores in potentiometric transduction.
Materials Science and Engineering: C, 31, (8), 1784-1790, (2011)
   

Almeida SAA et al., Novel LTCC-potentiometric microfluidic device for biparametric analysis of organic compounds carrying plastic antibodies as ionophores: Application to sulfamethoxazole and trimethoprim.
Biosensors and Bioelectronics, 30, (1), 197-203, (2011)
   

Almeida SAA et al., Optimizing potentiometric ionophore and electrode design for environmental on-site control of antibiotic drugs: Application to sulfamethoxazole.
Biosensors and Bioelectronics, 35, (1), 319-326, (2012)
   

Montenegro MCBSM

Rebelo TSCR et al., Trimethoprim-selective electrodes with molecularly imprinted polymers acting as ionophores and potentiometric transduction on graphite solid-contact.
Microchemical Journal, 98, (1), 21-28, (2011)
   

Montereali MR

Marino S et al., Proceeding, "Screen printing" for chemical sensor and biosensor production, 
Mazzei F, Pilloton R (Eds.), 1-23, (2000)
   

Montero-Cabrera LA

Mascini M et al., Book chapter, Multiple Minima Hypersurfaces Procedures for Biomimetic Ligands Screening, 
In: Sensors and Microsystems, Neri G, Donato N, D'Amico A, Di Natale C (Eds.) Springer Netherlands: Ch. 65, 403-407, (2011)
   

Montevecchi FM

Ciardelli G et al., Proceeding, Molecular imprinted nanostructures in biomedical applications, 
561-567, (2006)
   

Monti D

Paolesse R et al., Book chapter, Fluorescence Based Sensor Arrays, 
In: Luminescence Applied in Sensor Science, Prodi L, Montalti M, Zaccheroni N (Eds.) Springer: Berlin / Heidelberg, 139-174, (2011)
   

Monti S

Monti S et al., Towards the design of highly selective recognition sites into molecular imprinting polymers: A computational approach.
Biosensors and Bioelectronics, 22, (1), 153-163, (2006)
   

Montilla F

Porcel-Valenzuela M et al., Molecularly imprinted silica films prepared by electroassisted deposition for the selective detection of dopamine.
Sensors and Actuators B: Chemical, 222, 63-70, (2016)
   

Monton MR

Monton MR et al., Tailoring Sol-Gel-Derived Silica Materials for Optical Biosensing.
Chemistry of Materials, 24, (5), 796-811, (2012)
   

Montoya A

Sorribes-Soriano A et al., Magnetic molecularly imprinted polymers for the selective determination of cocaine by ion mobility spectrometry.
Journal of Chromatography A, 1545, 22-31, (2018)
   

Monzel AS

Lee MH et al., Epitope imprinting of alpha-synuclein for sensing in Parkinson's brain organoid culture medium.
Biosensors and Bioelectronics, 175, Article112852-(2021)
   

Lee MH et al., Transition metal dichalcogenides to optimize the performance of peptide-imprinted conductive polymers as electrochemical sensors.
Microchimica Acta, 188, (6), Article203-(2021)
   

Mookda P

Mookda P et al., Synthesis of nicotinamide-imprinted polymers and their binding performances in organic and aqueous media.
E-Polymers, Art. No. 091-(2008)
   

Moon H

Hwang MJ et al., Preparation of Molecularly Imprinted Polymers for the Detection of Aromatic Hydrocarbons.
Journal of Nanoscience and Nanotechnology, 11, (8), 7206-7209, (2011)
   

Hwang MJ et al., Adsorption of toxic gases on molecularly imprinted polymer coated QCM: measurements and modeling for partial pressure in gas mixture.
Adsorption, 25, (4), 825-832, (2019)
   

Moon JM

Hussain KK et al., Electrochemical Detection of Hemoglobin: A Review.
Electroanalysis, 29, (10), 2190-2199, (2017)
   

Kim DM et al., A potentiometric non-enzymatic glucose sensor using a molecularly imprinted layer bonded on a conducting polymer.
Biosensors and Bioelectronics, 91, 276-283, (2017)
   

Moon MH

Jang R et al., Analysis of phospholipids using an open-tubular capillary column with a monolithic layer of molecularly imprinted polymer in capillary electrochromatography-electrospray ionization-tandem mass spectrometry.
Electrophoresis, 32, (16), 2167-2173, (2011)
   

Moore BD

Brown SL et al., Production of highly selective binding sites in synthetic polymers via bio-molecular imprinting.
Journal of Pharmacy and Pharmacology, 58, A75-A75, (2006)
   

Moore CA

Belitsky JM et al., Colorimetric metal ion binding of catechol-based coatings inspired by melanin and molecular imprinting.
Supramolecular Chemistry, 26, (3-4), 233-244, (2014)
   

Moore DS

Brown KE et al., Advances in explosives analysis-part I: animal, chemical, ion, and mechanical methods.
Analytical and Bioanalytical Chemistry, 408, (1), 35-47, (2016)
   

Moore L

Kim HJ et al., Diamond Nanogel-Embedded Contact Lenses Mediate Lysozyme-Dependent Therapeutic Release.
ACS Nano, 8, (3), 2998-3005, (2014)
   

Moore LJ

Hamdan S et al., Ionic liquid crosslinkers for chiral imprinted nanoGUMBOS.
Journal of Colloid and Interface Science, 463, 29-36, (2016)
   

Moore RG

Wang JL et al., Templated polymers enable selective capture and release of lysophosphatidic acid in human plasma via optimization of non-covalent binding to functional monomers.
Analyst, 140, (22), 7572-7577, (2015)
   

Moore SC

Piszkiewicz S et al., Molecularly-imprinted nanoparticles that recognize Naja mossambica cytotoxins: binding studies and biological effects.
Chemical Communications, 49, (53), 5954-5956, (2013)
   

Moores LC

Fernando PUAI et al., Toward Rational Design of Electrogenerated Molecularly Imprinted Polymers (eMIPs): Maximizing Monomer/Template Affinity.
ACS Applied Polymer Materials, 3, (9), 4523-4533, (2021)
   

Moorthy MS

Moorthy MS et al., Ion-imprinted mesoporous silica hybrids for selective recognition of target metal ions.
Microporous And Mesoporous Materials, 180, 162-171, (2013)
   

Park SS et al., Periodic mesoporous organosilicas for advanced applications.
NPG Asia Materials, 6, e96-(2014)
   

Mora-Granados M

Mora-Granados M et al., Disposable electrochemical sensor combined with molecularly imprinted solid-phase extraction for catabolites detection of flavan-3-ol in urine samples.
Talanta, 235, Article122734-(2021)
   

Morachioli A

Vozzi G et al., SOFT-MI: A novel microfabrication technique integrating soft-lithography and molecular imprinting for tissue engineering applications.
Biotechnology and Bioengineering, 106, (5), 804-817, (2010)
   

Moradi M

Afkhami A et al., Fabrication of an Electrochemical Sensor Based on a New Nano-ion Imprinted Polymer for Highly Selective and Sensitive Determination of Molybdate.
Analytical and Bioanalytical Chemistry Research, 5, (1), 41-53, (2018)
   

Moradi N

Shamsipur M et al., Coupled electrochemical-chemical procedure used in construction of molecularly imprinted polymer-based electrode: a highly sensitive impedimetric melamine sensor.
Journal of Solid State Electrochemistry, 22, (1), 169-180, (2018)
   

Moradian A

Moradian A et al., Preparation of a functional, highly selective polymer by molecular imprinting. A demonstration with L-p-aminophenylalanine anilide as a template molecule allowing multiple points of attachment.
Journal of Molecular Recognition, 2, (4), 167-169, (1989)
   

Mohr GJ et al., Reversible chemical reactions as the basis for optical sensors used to detect amines, alcohols and humidity.
Journal of Materials Chemistry, 9, (9), 2259-2264, (1999)
   

Moraes FC

Santos AM et al., Voltammetric determination of ethinylestradiol using screen-printed electrode modified with functionalized graphene, graphene quantum dots and magnetic nanoparticles coated with molecularly imprinted polymers.
Talanta, 224, Article121804-(2021)
   

Moraes G

Santos MG et al., Restricted access molecularly imprinted polymers obtained by bovine serum albumin and/or hydrophilic monomers' external layers: a comparison related to physical and chemical properties.
Analyst, 140, (22), 7768-7775, (2015)
   

Moraes GdOI

Moraes GdOI et al., A new restricted access molecularly imprinted polymer capped with albumin for direct extraction of drugs from biological matrices: the case of chlorpromazine in human plasma.
Analytical and Bioanalytical Chemistry, 405, (24), 7687-7696, (2013)
   

Moraglio G

Baggiani C et al., Chromatographic characterization of a molecularly imprinted polymer binding theophylline in aqueous buffers.
Journal of Chromatography A, 786, (1), 23-29, (1997)
   

Morais EC

Morais EC et al., Silica imprinted materials containing pharmaceuticals as a template: textural aspects.
Journal of Sol-Gel Science and Technology, 64, (2), 324-334, (2012)
   

Morais EC et al., Selective silica-based sorbent materials synthesized by molecular imprinting for adsorption of pharmaceuticals in aqueous matrices.
Journal of Separation Science, 36, (3), 636-643, (2013)
   

Morais EC et al., The interaction of encapsulated pharmaceutical drugs with a silica matrix.
Colloids and Surfaces B: Biointerfaces, 103, 422-429, (2013)
   

Morais EC et al., Imprinted silicas for paracetamol preconcentration prepared by the sol-gel process.
Journal of Sol-Gel Science and Technology, 83, (1), 90-99, (2017)
   

Morais S

Morais S et al., Book chapter, Urea pesticides, 
In: Pesticides - Strategies for Pesticides Analysis, Stoytcheva M (Ed.) InTech: Rikeka, Croatia, Ch. 10, 241-262, (2011)
   

Morales D

Guzmán-Vázquez de Prada A et al., Molecularly imprinted polymer solid-phase extraction coupled to square wave voltammetry at carbon fibre microelectrodes for the determination of fenbendazole in beef liver.
Analytical and Bioanalytical Chemistry, 388, (1), 227-234, (2007)
   

Morales Gomero JC

Fernández-Cori R et al., Nanostructured Sensors for Determination of 3-(3, 4-Dichlorophenyl)-1, 1-Dimethylurea Based in Molecularly Imprinted Polymers (MIPs) Deposited in Screen Printed Carbon Nanotubes.
ECS Transactions, 66, (37), 33-41, (2015)
   

Morales Gomero JC et al., Nanostructured Sensors for Determination of 3-(3, 4-Dichlorophenyl)-1, 1-Dimethylurea Based in Molecularly Imprinted Polymers (MIPs) Deposited in Screen Printed Carbon Nanotubes.
ECS Meeting Abstracts, MA2015-01, (40), 2124-2124, (2015)
   

Morales-Narváez E

Zor E et al., Graphene Quantum Dots-based Photoluminescent Sensor: A Multifunctional Composite for Pesticide Detection.
ACS Applied Materials & Interfaces, 7, (36), 20272-20279, (2015)
   

Zamora-Gálvez A et al., Molecularly Imprinted Polymer-Decorated Magnetite Nanoparticles for Selective Sulfonamide Detection.
Analytical Chemistry, 88, (7), 3578-3584, (2016)
   

Zamora-Gálvez A et al., Nanomaterials connected to antibodies and molecularly imprinted polymers as bio/receptors for bio/sensor applications.
Applied Materials Today, 9, 387-401, (2017)
   

Morallón E

Porcel-Valenzuela M et al., Molecularly imprinted silica films prepared by electroassisted deposition for the selective detection of dopamine.
Sensors and Actuators B: Chemical, 222, 63-70, (2016)
   

Morante S

Gañán J et al., Development of a molecularly imprinted polymer-matrix solid-phase dispersion method for selective determination of [beta]-estradiol as anabolic growth promoter in goat milk.
Analytical and Bioanalytical Chemistry, 403, (10), 3025-3029, (2012)
   

Morante-Zarcero S

Morante-Zarcero S et al., Comparative HPLC methods for [beta]-blockers separation using different types of chiral stationary phases in normal phase and polar organic phase elution modes. Analysis of propranolol enantiomers in natural waters.
Journal of Pharmaceutical and Biomedical Analysis, 62, (1), 33-41, (2012)
   

Morante-Zarcero S et al., Simultaneous Enantiomeric Determination of Propranolol, Metoprolol, Pindolol, and Atenolol in Natural Waters by HPLC on New Polysaccharide-Based Stationary Phase using a Highly Selective Molecularly Imprinted Polymer Extraction.
Chirality, 24, (10), 860-866, (2012)
   

Gañán J et al., Evaluation of a molecularly imprinted polymer for determination of steroids in goat milk by matrix solid phase dispersion.
Talanta, 126, 157-162, (2014)
   

Sierra I et al., Approaches for enantioselective resolution of pharmaceuticals by miniaturised separation techniques with new chiral phases based on nanoparticles and monolithis.
Electrophoresis, 37, (19), 2538-2553, (2016)
   

Casado N et al., Current development and applications of ordered mesoporous silicas and other sol-gel silica-based materials in food sample preparation for xenobiotics analysis.
TrAC Trends in Analytical Chemistry, 88, 167-184, (2017)
   

Gañán J et al., Evaluation of mesoporous imprinted silicas as MSPD selective sorbents of ketoprofen in powder milk.
Materials Letters, 197, 5-7, (2017)
   

Moravcova D

Klodzinska E et al., Monolithic continuous beds as a new generation of stationary phase for chromatographic and electro-driven separations.
Journal of Chromatography A, 1109, (1), 51-59, (2006)
   

More VN

More VN et al., Microextraction techniques in extraction of drugs.
International Journal of Research in Pharmacy and Chemistry, 3, (2), 330-344, (2013)
   

Moreau JJE

Moreau JJE et al., The design of selective catalysts from hybrid silica-based materials.
Coordination Chemistry Reviews, 178-180, (2), 1073-1084, (1998)
   

Arrachart G et al., Silylated Melamine and Cyanuric Acid as Precursors for Imprinted and Hybrid Silica Materials with Molecular Recognition Properties.
Chemistry - A European Journal, 15, (25), 6279-6288, (2009)
   

Moreda-Pineiro A

Moreda-Pineiro A et al., MIPs as a Versatile Tool for Micro-Solid-Phase Extraction and Probe Sensing.
Current Chemical Biology, 12, (2), 114-134, (2018)
   

Moreda-Piñeiro A

Otero-Romaní J et al., Synthesis, characterization and evaluation of ionic-imprinted polymers for solid-phase extraction of nickel from seawater.
Analytica Chimica Acta, 630, (1), 1-9, (2008)
   

García-Otero N et al., On-line ionic imprinted polymer selective solid-phase extraction of nickel and lead from seawater and their determination by inductively coupled plasma-optical emission spectrometry.
Analytical and Bioanalytical Chemistry, 395, (4), 1107-1115, (2009)
   

Otero-Romaní J et al., Inductively coupled plasma-optical emission spectrometry/mass spectrometry for the determination of Cu, Ni, Pb and Zn in seawater after ionic imprinted polymer based solid phase extraction.
Talanta, 79, (3), 723-729, (2009)
   

Otero-Romaní J et al., Ionic imprinted polymer for nickel recognition by using the bi-functionalized 5-vinyl-8-hydroxyquinoline as a monomer: Application as a new solid phase extraction support.
Microchemical Journal, 93, (2), 225-231, (2009)
   

Barciela-Alonso MC et al., Ionic imprinted polymer based solid phase extraction for cadmium and lead pre-concentration/determination in seafood.
Microchemical Journal, 114, 106-110, (2014)
   

Rodríguez-Reino MP et al., Mercury speciation in seawater by liquid chromatography-inductively coupled plasma-mass spectrometry following solid phase extraction pre-concentration by using an ionic imprinted polymer based on methyl-mercury-phenobarbital interaction.
Journal of Chromatography A, 1391, 9-17, (2015)
   

Sánchez-González J et al., Porous membrane-protected molecularly imprinted polymer micro-solid-phase extraction for analysis of urinary cocaine and its metabolites using liquid chromatography - Tandem mass spectrometry.
Analytica Chimica Acta, 898, 50-59, (2015)
   

Chantada-Vázquez MP et al., Simple and Sensitive Molecularly Imprinted Polymer - Mn-Doped ZnS Quantum Dots Based Fluorescence Probe for Cocaine and Metabolites Determination in Urine.
Analytical Chemistry, 88, (5), 2734-2741, (2016)
   

Chantada-Vázquez MP et al., Synthesis and characterization of novel molecularly imprinted polymer - coated Mn-doped ZnS quantum dots for specific fluorescent recognition of cocaine.
Biosensors and Bioelectronics, 75, 213-221, (2016)
   

Sánchez-González J et al., Development of magnetic molecularly imprinted polymers for solid phase extraction of cocaine and metabolites in urine before high performance liquid chromatography - tandem mass spectrometry.
Talanta, 147, 641-649, (2016)
   

Sánchez-González J et al., Determination of cocaine and its metabolites in plasma by porous membrane-protected molecularly imprinted polymer micro-solid-phase extraction and liquid chromatography-tandem mass spectrometry.
Journal of Chromatography A, 1451, 15-22, (2016)
   

Sánchez-González J et al., Magnetic molecularly imprinted polymer based - micro-solid phase extraction of cocaine and metabolites in plasma followed by high performance liquid chromatography - tandem mass spectrometry.
Microchemical Journal, 127, 206-212, (2016)
   

Sánchez-González J et al., Cannabinoids assessment in plasma and urine by high performance liquid chromatography-tandem mass spectrometry after molecularly imprinted polymer microsolid-phase extraction.
Analytical and Bioanalytical Chemistry, 409, (5), 1207-1220, (2017)
   

Chantada-Vázquez MP et al., Development and application of molecularly imprinted polymer - Mn-doped ZnS quantum dot fluorescent optosensing for cocaine screening in oral fluid and serum.
Talanta, 181, 232-238, (2018)
   

Sánchez-González J et al., Development of a micro-solid-phase extraction molecularly imprinted polymer technique for synthetic cannabinoids assessment in urine followed by liquid chromatography-tandem mass spectrometry.
Journal of Chromatography A, 1550, 8-20, (2018)
   

Chmangui A et al., Aflatoxins screening in non-dairy beverages by Mn-doped ZnS quantum dots - Molecularly imprinted polymer fluorescent probe.
Talanta, 199, 65-71, (2019)
   

Sánchez-González J et al., NMR spectroscopy for assessing cocaine-functional monomer interactions when preparing molecularly imprinted polymers.
Microchemical Journal, 147, 813-817, (2019)
   

Sánchez-González J et al., HPLC-MS/MS combined with membrane-protected molecularly imprinted polymer micro-solid-phase extraction for synthetic cathinones monitoring in urine.
Drug Testing and Analysis, 11, (1), 33-44, (2019)
   

Jayasinghe GDTM et al., Miniaturized vortex assisted-dispersive molecularly imprinted polymer micro-solid phase extraction and HPLC-MS/MS for assessing trace aflatoxins in cultured fish.
Analytical Methods, 12, (35), 4351-4362, (2020)
   

Jayasinghe GDTM et al., Ultrasound assisted combined molecularly imprinted polymer for the selective micro-solid phase extraction and determination of aflatoxins in fish feed using liquid chromatography-tandem mass spectrometry.
Journal of Chromatography A, 1609, Article460431-(2020)
   

Jinadasa KK et al., Ionic imprinted polymer - Vortex-assisted dispersive micro-solid phase extraction for inorganic arsenic speciation in rice by HPLC-ICP-MS.
Talanta, 220, Article121418-(2020)
   

Jinadasa KK et al., New adsorbents based on imprinted polymers and composite nanomaterials for arsenic and mercury screening/speciation: A review.
Microchemical Journal, 156, Article104886-(2020)
   

Jinadasa KK et al., Ionic imprinted polymer solid-phase extraction for inorganic arsenic selective pre-concentration in fishery products before high-performance liquid chromatography - inductively coupled plasma-mass spectrometry speciation.
Journal of Chromatography A, 1619, Article460973-(2020)
   

Jinadasa KK et al., Synthesis and application of a surface ionic imprinting polymer on silica-coated Mn-doped ZnS quantum dots as a chemosensor for the selective quantification of inorganic arsenic in fish.
Analytical and Bioanalytical Chemistry, 412, (7), 1663-1673, (2020)
   

Madurangika Jayasinghe GDT et al., Room temperature phosphorescent determination of aflatoxins in fish feed based on molecularly imprinted polymer - Mn-doped ZnS quantum dots.
Analytica Chimica Acta, 1103, 183-191, (2020)
   

Chmangui A et al., Assessment of trace levels of aflatoxins AFB1 and AFB2 in non-dairy beverages by molecularly imprinted polymer based micro solid-phase extraction and liquid chromatography-tandem mass spectrometry.
Analytical Methods, 13, (30), 3433-3443, (2021)
   

Jinadasa KK et al., Mercury speciation in edible seaweed by liquid chromatography - Inductively coupled plasma mass spectrometry after ionic imprinted polymer-solid phase extraction.
Talanta, 224, Article121841-(2021)
   

Moreira AB

da Mata K et al., Synthesis and characterization of cross-linked molecularly imprinted polyacrylamide for the extraction/preconcentration of glyphosate and aminomethylphosphonic acid from water samples.
Reactive and Functional Polymers, 83, 76-83, (2014)
   

Moreira APT

Ferreira NS et al., New electrochemically-derived plastic antibody on a simple conductive paper support for protein detection: Application to BSA.
Sensors and Actuators B: Chemical, 243, 1127-1136, (2017)
   

Moreira BM

Moreira BM et al., Determination of Free Glycerol in Biodiesel by Molecularly Imprinted Polymer - Based Solid-Phase Extraction (SPE) Using an Enzymatic Spectrophotometric Assay.
Analytical Letters, 54, (10), 1654-1667, (2021)
   

Moreira FTC

Kamel AH et al., Novel Potentiometric Sensors of Molecular Imprinted Polymers for Specific Binding of Chlormequat.
Electroanalysis, 20, (2), 194-202, (2008)
   

Moreira FTC et al., New biomimetic sensors for the determination of tetracycline in biological samples: Batch and flow mode operations.
Analytical Methods, 2, (12), 2039-2045, (2010)
   

Moreira FTC et al., Man-tailored biomimetic sensor of molecularly imprinted materials for the potentiometric measurement of oxytetracycline.
Biosensors and Bioelectronics, 26, (2), 566-574, (2010)
   

Moreira FTC et al., New potentiometric sensors based on two competitive recognition sites for determining tetracycline residues using flow-through system.
Procedia Engineering, 5, 1200-1203, (2010)
   

Almeida SAA et al., Sulphonamide-imprinted sol-gel materials as ionophores in potentiometric transduction.
Materials Science and Engineering: C, 31, (8), 1784-1790, (2011)
   

Guerreiro JRL et al., Selective recognition in potentiometric transduction of amoxicillin by molecularly imprinted materials.
European Food Research and Technology, 232, (1), 39-50, (2011)
   

Kamel AH et al., Biomimetic Sensor Potentiometric System for Doxycycline Antibiotic Using a Molecularly Imprinted Polymer as an Artificial Recognition Element.
Sensor Letters, 9, (5), 1654-1660, (2011)
   

Kamel AH et al., A Solid Binding Matrix/Mimic Receptor-Based Sensor System for Trace Level Determination of Iron Using Potential Measurements.
International Journal of Electrochemistry, 2011, Article ID 643683-(2011)
   

Kamel AH et al., Molecularly-Imprinted Materials for Potentiometric Transduction: Application to the Antibiotic Enrofloxacin.
Analytical Letters, 44, (12), 2107-2123, (2011)
   

Moreira FTC et al., Biomimetic sensors of molecularly-imprinted polymers for chlorpromazine determination.
Materials Science and Engineering: C, 31, (5), 1121-1128, (2011)
   

Moreira FTC et al., Myoglobin-biomimetic electroactive materials made by surface molecular imprinting on silica beads and their use as ionophores in polymeric membranes for potentiometric transduction.
Biosensors and Bioelectronics, 26, (12), 4760-4766, (2011)
   

Moreira FTC et al., Biomimetic norfloxacin sensors made of molecularly-imprinted materials for potentiometric transduction.
Microchimica Acta, 172, (1), 15-23, (2011)
   

Moreira FTC et al., Artificial antibodies for troponin T by its imprinting on the surface of multiwalled carbon nanotubes: Its use as sensory surfaces.
Biosensors and Bioelectronics, 28, (1), 243-250, (2011)
   

Oliveira HMV et al., Ciprofloxacin-imprinted polymeric receptors as ionophores for potentiometric transduction.
Electrochimica Acta, 56, (5), 2017-2023, (2011)
   

Moreira FTC et al., Surface Imprinting Approach on Screen Printed Electrodes Coated with Carboxylated PVC for Myoglobin detection with Electrochemical Transduction.
Procedia Engineering, 47, 865-868, (2012)
   

Moreira FTC et al., Smart plastic antibody material (SPAM) tailored on disposable screen printed electrodes for protein recognition: Application to myoglobin detection.
Biosensors and Bioelectronics, 45, 237-244, (2013)
   

Moreira FTC et al., Novel biosensing device for point-of-care applications with plastic antibodies grown on Au-screen printed electrodes.
Sensors and Actuators B: Chemical, 182, 733-740, (2013)
   

Moreira FTC et al., Electrochemical biosensor based on biomimetic material for myoglobin detection.
Electrochimica Acta, 107, 481-487, (2013)
   

Moreira FTC et al., Host-tailored sensors for leucomalachite green potentiometric measurements.
Journal of Chemistry, 2013, Article ID 605403-(2013)
   

Tavares APM et al., Haemoglobin smart plastic antibody material tailored with charged binding sites on silica nanoparticles: its application as an ionophore in potentiometric transduction.
RSC Advances, 3, (48), 26210-26219, (2013)
   

Moreira FTC et al., Protein-responsive polymers for point-of-care detection of cardiac biomarker.
Sensors and Actuators B: Chemical, 196, 123-132, (2014)
   

Moret J et al., New molecularly-imprinted polymer for carnitine and its application as ionophore in potentiometric selective membranes.
Materials Science and Engineering: C, 43, 481-487, (2014)
   

Moreira FTC et al., Detection of cardiac biomarker proteins using a disposable based on a molecularly imprinted polymer grafted onto graphite.
Microchimica Acta, 182, (5-6), 975-983, (2015)
   

Khan MAR et al., Plastic antibody for the electrochemical detection of bacterial surface proteins.
Sensors and Actuators B: Chemical, 233, 697-704, (2016)
   

Moreira FTC et al., Screen-printed electrode produced by printed-circuit board technology. Application to cancer biomarker detection by means of plastic antibody as sensing material.
Sensors and Actuators B: Chemical, 223, 927-935, (2016)
   

Frasco MF et al., Imprinting Technology in Electrochemical Biomimetic Sensors.
Sensors, 17, (3), ArticleNo523-(2017)
   

Moreira FTC et al., Smart naturally plastic antibody based on poly([alpha]-cyclodextrin) polymer for [beta]-amyloid-42 soluble oligomer detection.
Sensors and Actuators B: Chemical, 240, 229-238, (2017)
   

Sacramento AS et al., Novel biomimetic composite material for potentiometric screening of acetylcholine, a neurotransmitter in Alzheimer's disease.
Materials Science and Engineering: C, 79, 541-549, (2017)
   

Gomes RS et al., Sensing CA 15-3 in point-of-care by electropolymerizing O-phenylenediamine (oPDA) on Au-screen printed electrodes.
PLoS ONE, 13, (5), ArticleNoe0196656-(2018)
   

Moreira FTC et al., Redox probe-free readings of a [beta]-amyloid-42 plastic antibody sensory material assembled on copper@carbon nanotubes.
Sensors and Actuators B: Chemical, 264, 1-9, (2018)
   

Moreira FTC et al., Biomimetic materials assembled on a photovoltaic cell as a novel biosensing approach to cancer biomarker detection.
Scientific Reports, 8, (1), ArticleNo10205-(2018)
   

Santos ART et al., Antibody Biomimetic Material Made of Pyrrole for CA 15-3 and Its Application as Sensing Material in Ion-Selective Electrodes for Potentiometric Detection.
Biosensors, 8, (1), ArticleNo8-(2018)
   

Moreira FTC et al., Autonomous biosensing device merged with photovoltaic technology for cancer biomarker detection.
Journal of Electroanalytical Chemistry, 855, Article113611-(2019)
   

Tavares APM et al., Photovoltaics, plasmonics, plastic antibodies and electrochromism combined for a novel generation of self-powered and self-signalled electrochemical biomimetic sensors.
Biosensors and Bioelectronics, 137, 72-81, (2019)
   

Tavares APM et al., Self-powered and self-signalled autonomous electrochemical biosensor applied to cancinoembryonic antigen determination.
Biosensors and Bioelectronics, 140, Article111320-(2019)
   

Ben Hassine A et al., Novel Electrochemical Molecularly Imprinted Polymer-Based Biosensor for Tau Protein Detection.
Chemosensors, 9, (9), ArticleNo238-(2021)
   

Cerqueira SMV et al., Development of an electrochemical biosensor for Galectin-3 detection in point-of-care.
Microchemical Journal, 164, Article105992-(2021)
   

Gonçalves MdL et al., Electrochemical Point-of Care (PoC) Determination of Interleukin-6 (IL-6) Using a Pyrrole (Py) Molecularly Imprinted Polymer (MIP) on a Carbon-Screen Printed Electrode (C-SPE).
Analytical Letters, 54, (16), 2611-2623, (2021)
   

Moreira FTC et al., Colorimetric cellulose-based test-strip for rapid detection of amyloid [beta]-42.
Microchimica Acta, 188, (10), Article334-(2021)
   

Moreira Gonçalves L

Couto RAS et al., Electrochemical sensing of ecstasy with electropolymerized molecularly imprinted poly(o-phenylenediamine) polymer on the surface of disposable screen-printed carbon electrodes.
Sensors and Actuators B: Chemical, 290, 378-386, (2019)
   

Moreira LFPP

Moreira LFPP et al., Fructose determination in fruit juices using an electrosynthesized molecularly imprinted polymer on reduced graphene oxide modified electrode.
Food Chemistry, 352, Article129430-(2021)
   

Moreira Tavares AP

Siqueira Silva M et al., Rational selection of hidden epitopes for a molecularly imprinted electrochemical sensor in the recognition of heat-denatured dengue NS1 protein.
Biosensors and Bioelectronics, 191, Article113419-(2021)
   

Morel T

Stanley S et al., Enantioselective detection of L-serine.
Sensors and Actuators B: Chemical, 89, (1-2), 103-106, (2003)
   

Morelli C

Parisi OI et al., Magnetic molecularly imprinted polymers (MMIPs) for carbazole derivative release in targeted cancer therapy.
Journal of Materials Chemistry B, 2, (38), 6619-6625, (2014)
   

Morelli I

Ciardelli G et al., Proceeding, Molecular imprinted nanostructures in biomedical applications, 
561-567, (2006)
   

Morelli I et al., Molecularly imprinted submicronspheres for applications in a novel model biosensor-film.
Sensors and Actuators B: Chemical, 150, (1), 394-401, (2010)
   

Vozzi G et al., SOFT-MI: A novel microfabrication technique integrating soft-lithography and molecular imprinting for tissue engineering applications.
Biotechnology and Bioengineering, 106, (5), 804-817, (2010)
   

Morello R

Prabhu SN et al., Functionality Evaluation of Micro-Electro-Mechanical-Systems Sensor for Varied Selective Functionalization Thickness to Determine Creatinine Concentration.
IEEE Sensors Journal, 21, (15), 17244-17253, (2021)
   

Moreno M

Lorenzo MÁ et al., Determination of butylparaben by adsorptive stripping voltammetry at glassy carbon electrodes modified with multi-wall carbon nanotubes.
Microchemical Journal, 110, 510-516, (2013)
   

Moreno Ruiz YP

de Escobar CC et al., Molecularly imprinted TiO2 photocatalysts for degradation of diclofenac in water.
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 538, 729-738, (2018)
   

Moreno-Bondi MC

Kempe M et al., Proceeding, CREAM: Cartridges with molecularly imprinted recognition elements for antibiotic residues monitoring in milk, 
van Ginkel LA, Ruiter A (Eds.), 655-657, (2000)
   

Marazuela MD et al., Fiber-optic biosensors - an overview.
Analytical and Bioanalytical Chemistry, 372, (5-6), 664-682, (2002)
   

Moreno-Bondi MC et al., Proceeding, Molecularly imprinted polymers as selective recognition elements for optical sensors based on fluorescent measurements, 
975-978, (2003)
   

Navarro-Villoslada F et al., Application of multivariate analysis to the screening of molecularly imprinted polymers for bisphenol A.
Analytica Chimica Acta, 504, (1), 149-162, (2004)
   

San Vicente B et al., Continuous solid-phase extraction and preconcentration of bisphenol A in aqueous samples using molecularly imprinted columns.
Analytical and Bioanalytical Chemistry, 380, (1), 115-122, (2004)
   

Benito-Peña E et al., Molecular engineering of fluorescent penicillins for molecularly imprinted polymer assays.
Analytical Chemistry, 78, (6), 2019-2027, (2006)
   

Urraca JL et al., A Stoichiometric Molecularly Imprinted Polymer for the Class-Selective Recognition of Antibiotics in Aqueous Media.
Angewandte Chemie International Edition, 45, (31), 5158-5161, (2006)
   

Urraca JL et al., Molecularly imprinted polymers with a streamlined mimic for zearalenone analysis.
Journal of Chromatography A, 1116, (1-2), 127-134, (2006)
   

Urraca JL et al., Molecularly imprinted polymers applied to the clean-up of zearalenone and [alpha]-zearalenol from cereal and swine feed sample extracts.
Analytical and Bioanalytical Chemistry, 385, (7), 1155-1161, (2006)
   

Moreno-Bondi MC et al., Proceeding, Molecularly imprinted polymers as biomimetic receptors for fluorescence-based optical sensors, 
Cutolo A, Culshaw B, López-Higuera JM (Eds.), Art. No. 66190C, (2007)
   

Navarro-Villoslada F et al., Zearalenone sensing with molecularly imprinted polymers and tailored fluorescent probes.
Sensors and Actuators B: Chemical, 121, (1), 67-73, (2007)
   

Urraca JL et al., Direct Extraction of Penicillin G and Derivatives from Aqueous Samples Using a Stoichiometrically Imprinted Polymer.
Analytical Chemistry, 79, (2), 695-701, (2007)
   

Urraca JL et al., Molecularly Imprinted Polymers as Antibody Mimics in Automated On-Line Fluorescent Competitive Assays.
Analytical Chemistry, 79, (13), 4915-4923, (2007)
   

Benito-Peña E et al., Solid-phase extraction of fluoroquinolones from aqueous samples using a water-compatible stochiometrically imprinted polymer.
Journal of Chromatography A, 1208, (1-2), 62-70, (2008)
   

Moreno-Bondi MC et al., Molecularly imprinted polymers as selective recognition elements in optical sensing.
Current Analytical Chemistry, 4, (4), 316-340, (2008)
   

Urraca JL et al., Effect of the template and functional monomer on the textural properties of molecularly imprinted polymers.
Biosensors and Bioelectronics, 24, (1), 155-161, (2008)
   

Benito-Peña E et al., Water-compatible molecularly imprinted polymer for the selective recognition of fluoroquinolone antibiotics in biological samples.
Analytical and Bioanalytical Chemistry, 393, (1), 235-245, (2009)
   

Ceolin G et al., Accelerated Development Procedure for Molecularly Imprinted Polymers Using Membrane Filterplates.
Journal of Combinatorial Chemistry, 11, (4), 645-652, (2009)
   

Barrios CA et al., Molecularly imprinted polymer diffraction grating as label-free optical bio(mimetic)sensor.
Biosensors and Bioelectronics, 26, (5), 2801-2804, (2011)
   

Rodriguez E et al., Multiresidue determination of fluoroquinolone antimicrobials in baby foods by liquid chromatography.
Food Chemistry, 127, (3), 1354-1360, (2011)
   

Rodríguez E et al., Multiresidue Determination of Ultratrace Levels of Fluoroquinolone Antimicrobials in Drinking and Aquaculture Water Samples by Automated Online Molecularly Imprinted Solid Phase Extraction and Liquid Chromatography.
Analytical Chemistry, 83, (6), 2046-2055, (2011)
   

Barrios CA et al., Molecularly imprinted polymer for label-free integrated optical waveguide bio(mimetic)sensors.
Sensors and Actuators B: Chemical, 161, (1), 607-614, (2012)
   

Lopes Pinheiro SC et al., Fluorescent ion-imprinted polymers for selective Cu(II) optosensing.
Analytical and Bioanalytical Chemistry, 402, (10), 3253-3260, (2012)
   

Moreno-Bondi MC et al., Book chapter, Immuno-Like Assays and Biomimetic Microchips, 
In: Molecular Imprinting, Haupt K (Ed.) Springer: Berlin / Heidelberg, 111-164, (2012)
   

Descalzo AB et al., Luminescent Core-Shell Imprinted Nanoparticles Engineered for Targeted Förster Resonance Energy Transfer-Based Sensing.
Analytical Chemistry, 85, (11), 5316-5320, (2013)
   

Luaces MD et al., Chemiluminescence analysis of enrofloxacin in surface water using the tris(1, 10-phenantroline)-ruthenium(II)/peroxydisulphate system and extraction with molecularly imprinted polymers.
Microchemical Journal, 110, 458-464, (2013)
   

Moreno-Bondi MC et al., Book chapter, Preparation of Molecularly Imprinted Polymers, 
In: Handbook of Molecularly Imprinted Polymers, Alvarez-Lorenzo C, Concheiro A (Eds.) Smithers Rapra: Ch. 2, 23-86, (2013)
   

Moreno-Bondi MC, Songjun Li, Yi Ge, Sergey A. Piletsky, Joseph Lunec (Eds.): Molecularly imprinted sensors: overview and applications (Book Review).
Analytical and Bioanalytical Chemistry, 405, (20), 6385-6386, (2013)
   

Wagner R et al., Synthesis, Spectroscopic, and Analyte-Responsive Behavior of a Polymerizable Naphthalimide-Based Carboxylate Probe and Molecularly Imprinted Polymers Prepared Thereof.
Journal of Organic Chemistry, 78, (4), 1377-1389, (2013)
   

Zdunek J et al., Surface-Imprinted Nanofilaments for Europium-Amplified Luminescent Detection of Fluoroquinolone Antibiotics.
Chemistry - A European Journal, 19, (31), 10209-10216, (2013)
   

Carrasco S et al., Cross-linkable linear copolymer with double functionality: resist for electron beam nanolithography and molecular imprinting.
Journal of Materials Chemistry C, 2, (8), 1400-1403, (2014)
   

Chen ZH et al., Fluorescent sensing of "quat" herbicides with a multifunctional pyrene-labeled monomer and molecular imprinting.
Sensors and Actuators B: Chemical, 191, 137-142, (2014)
   

Otero-Pazos P et al., Active Food Packaging Based on Molecularly Imprinted Polymers: Study of the Release Kinetics of Ferulic Acid.
Journal of Agricultural and Food Chemistry, 62, (46), 11215-11221, (2014)
   

Urraca JL et al., Multiresidue analysis of fluoroquinolone antimicrobials in chicken meat by molecularly imprinted solid-phase extraction and high performance liquid chromatography.
Journal of Chromatography A, 1343, 1-9, (2014)
   

Urraca JL et al., Molecular recognition with nanostructures fabricated by photopolymerization within metallic subwavelength apertures.
Nanoscale, 6, (15), 8656-8663, (2014)
   

Wulandari M et al., Molecularly imprinted polymers-curcuminoids and its application for solid phase extraction.
AIP Conference Proceedings, 1589, 400-403, (2014)
   

Abou-Hany RAG et al., Tailoring molecularly imprinted polymer beads for alternariol recognition and analysis by a screening with mycotoxin surrogates.
Journal of Chromatography A, 1425, 231-239, (2015)
   

Benito-Peña E et al., Experimental Mixture Design as a Tool for the Synthesis of Antimicrobial Selective Molecularly Imprinted Monodisperse Microbeads.
ACS Applied Materials & Interfaces, 7, (20), 10966-10976, (2015)
   

Carrasco S et al., Fiber-optic array using molecularly imprinted microspheres for antibiotic analysis.
Chemical Science, 6, (5), 3139-3147, (2015)
   

Wulandari M et al., Molecularly imprinted polymers for cleanup and selective extraction of curcuminoids in medicinal herbal extracts.
Analytical and Bioanalytical Chemistry, 407, (3), 803-812, (2015)
   

Baeza AN et al., Multiresidue analysis of cephalosporin antibiotics in bovine milk based on molecularly imprinted polymer extraction followed by liquid chromatography-tandem mass spectrometry.
Journal of Chromatography A, 1474, 121-129, (2016)
   

Benito-Peña E et al., Fluorescence based fiber optic and planar waveguide biosensors. A review.
Analytica Chimica Acta, 943, 17-40, (2016)
   

Benito-Peña E et al., Molecularly imprinted hydrogels as functional active packaging materials.
Food Chemistry, 190, 487-494, (2016)
   

Carrasco S et al., Multibranched Gold-Mesoporous Silica Nanoparticles Coated with a Molecularly Imprinted Polymer for Label-Free Antibiotic Surface-Enhanced Raman Scattering Analysis.
Chemistry of Materials, 28, (21), 7947-7954, (2016)
   

Moreno-Bondi MC et al., Analytical applications of biomimetic recognition elements.
Analytical and Bioanalytical Chemistry, 408, (7), 1725-1726, (2016)
   

Urraca JL et al., Molecularly imprinted polymer beads for clean-up and preconcentration of [beta]-lactamase-resistant penicillins in milk.
Analytical and Bioanalytical Chemistry, 408, (7), 1843-1854, (2016)
   

Urraca JL et al., Development of magnetic molecularly imprinted polymers for selective extraction: determination of citrinin in rice samples by liquid chromatography with UV diode array detection.
Analytical and Bioanalytical Chemistry, 408, (11), 3033-3042, (2016)
   

Moreno-Bondi MC et al., Book chapter, Molecularly Imprinted Polymer-based Optical Chemosensors for Selective Chemical Determinations, 
In: Molecularly Imprinted Polymers for Analytical Chemistry Applications, Kutner W, Sharma PS (Eds.) Royal Society of Chemistry: Ch. 8, 227-281, (2018)
   

Peltomaa R et al., Optical Biosensors for Label-Free Detection of Small Molecules.
Sensors, 18, (12), (2018)
   

Peltomaa R et al., Bioinspired recognition elements for mycotoxin sensors.
Analytical and Bioanalytical Chemistry, 410, (3), 747-771, (2018)
   

Rico-Yuste A et al., Analysis of alternariol and alternariol monomethyl ether in foodstuffs by molecularly imprinted solid-phase extraction and ultra-high-performance liquid chromatography tandem mass spectrometry.
Food Chemistry, 243, 357-364, (2018)
   

Urraca JL et al., Magnetic Field-Induced Polymerization of Molecularly Imprinted Polymers.
The Journal of Physical Chemistry C, 122, (18), 10189-10196, (2018)
   

Gómez-Arribas LN et al., Tag-Specific Affinity Purification of Recombinant Proteins by Using Molecularly Imprinted Polymers.
Analytical Chemistry, 91, (6), 4100-4106, (2019)
   

Gómez-Arribas LN et al., Hierarchically Imprinted Polymer for Peptide Tag Recognition Based on an Oriented Surface Epitope Approach.
ACS Applied Materials & Interfaces, 12, (43), 49111-49121, (2020)
   

Quílez-Alburquerque J et al., Luminescent molecularly imprinted polymer nanocomposites for emission intensity and lifetime rapid sensing of tenuazonic acid mycotoxin.
Polymer, 230, Article124041-(2021)
   

Rico-Yuste A et al., Eu(III)-Templated molecularly imprinted polymer used as a luminescent sensor for the determination of tenuazonic acid mycotoxin in food samples.
Sensors and Actuators B: Chemical, 329, Article129256-(2021)
   

Moreno-González D

Moreno-González D et al., Molecularly imprinted polymer as in-line concentrator in capillary electrophoresis coupled with mass spectrometry for the determination of quinolones in bovine milk samples.
Journal of Chromatography A, 1360, 1-8, (2014)
   

Moreno-González D et al., Determination of aminoglycosides in honey by capillary electrophoresis tandem mass spectrometry and extraction with molecularly imprinted polymers.
Analytica Chimica Acta, 891, 321-328, (2015)
   

Hernández-Mesa M et al., Evaluation of a Selective Approach for the Determination of 5-Nitroimidazoles in Aquaculture Products by Capillary Liquid Chromatography Using Molecularly Imprinted Solid-Phase Extraction.
Food Analytical Methods, 10, (11), 3647-3657, (2017)
   

Moreno-González D et al., Evaluation of hydrophilic interaction liquid chromatography-tandem mass spectrometry and extraction with molecularly imprinted polymers for determination of aminoglycosides in milk and milk-based functional foods.
Talanta, 171, 74-80, (2017)
   

Moreno-González D et al., In-line molecularly imprinted polymer solid phase extraction-capillary electrophoresis coupled with tandem mass spectrometry for the determination of patulin in apple-based food.
Food Chemistry, 334, Article127607-(2021)
   

Moret J

Moret J et al., New molecularly-imprinted polymer for carnitine and its application as ionophore in potentiometric selective membranes.
Materials Science and Engineering: C, 43, 481-487, (2014)
   

Moret S

Lucci P et al., Selective solid-phase extraction using a molecularly imprinted polymer for the analysis of patulin in apple-based foods.
Journal of Separation Science, 40, (2), 458-465, (2017)
   

Moretto LM

Ugo P et al., Trace Electroanalysis of Perfluorinated Alkyl Substances with Molecularly Imprinted Polymer Sensors.
Proceedings, 1, (8), ArticleNo798-(2017)
   

Karimian N et al., Electrochemosensor for Trace Analysis of Perfluorooctanesulfonate in Water Based on a Molecularly Imprinted Poly(o-phenylenediamine) Polymer.
ACS Sensors, 3, (7), 1291-1298, (2018)
   

Moro G et al., Conductive imprinted polymers for the direct electrochemical detection of [beta]-lactam antibiotics: The case of cefquinome.
Sensors and Actuators B: Chemical, 297, Article126786-(2019)
   

Morgado PI

da Silva MS et al., Development of 2-(dimethylamino)ethyl methacrylate-based molecular recognition devices for controlled drug delivery using supercritical fluid technology.
International Journal of Pharmaceutics, 416, (1), 61-68, (2011)
   

Morgalyuk VP

Morgalyuk VP et al., Novel Template Sorbents for Separation of Americium(III) from Nitric Acid Solutions: Search of Optimal Ion-Imitator of AmIII.
Helvetica Chimica Acta, 97, (12), 1644-1651, (2014)
   

Morgan DE

Martin P et al., Evaluation of a molecular-imprinted polymer for use in the solid phase extraction of propranolol from biological fluids.
Analytical Communications, 34, (2), 45-47, (1997)
   

Morgan G

Zulfiqar A et al., Detection of multiple steroidal compounds in synthetic urine using comprehensive gas chromatography-mass spectrometry (GC x GC-MS) combined with a molecularly imprinted polymer clean-up protocol.
Analyst, 139, (19), 4955-4963, (2014)
   

Hand RA et al., Application of molecularly imprinted polymers in the anti-doping field: sample purification and compound analysis.
Analyst, 145, (14), 4716-4736, (2020)
   

Morgan GH

Nicoara SC et al., Development of sample clean up methods for the analysis of Mycobacterium tuberculosis methyl mycocerosate biomarkers in sputum extracts by gas chromatography-mass spectrometry.
Journal of Chromatography B, 986-987, 135-142, (2015)
   

Morgan JN

Vonderheide AP et al., Analysis of permethrin isomers in composite diet samples by molecularly imprinted solid-phase extraction and isotope dilution gas chromatography-ion trap mass spectrometry.
Journal of Chromatography A, 1216, (22), 4633-4640, (2009)
   

Morgan SL

Greene NT et al., Molecularly imprinted polymer sensor arrays.
Chemical Communications, (10), 1172-1173, (2004)
   

Morgan SP

Hernandez FU et al., Proceeding, Propofol Detection Using Optical Fibre Long Period Grating Sensors with Molecularly Imprinted Host-Guest Binding Sites in TiO2 Films, 
Article_TuE72, (2018)
   

Liu LL et al., Proceeding, Molecularly Imprinted Nanoparticles Based on Long Period Grating Sensor for Detection of Fentanyl, 
Article_WF7, (2018)
   

He CY et al., Surface polymer imprinted optical fibre sensor for dose detection of dabrafenib.
Analyst, 145, (13), 4504-4511, (2020)
   

Liu LL et al., Carboxyl-fentanyl detection using optical fibre grating-based sensors functionalised with molecularly imprinted nanoparticles.
Biosensors and Bioelectronics, 177, Article113002-(2021)
   

Morganti Ferreira Dias LE

Siqueira Silva M et al., Rational selection of hidden epitopes for a molecularly imprinted electrochemical sensor in the recognition of heat-denatured dengue NS1 protein.
Biosensors and Bioelectronics, 191, Article113419-(2021)
   

Mori G

Bianchi F et al., Solid-phase microextraction of 2, 4, 6-trinitrotoluene using a molecularly imprinted-based fiber.
Analytical and Bioanalytical Chemistry, 403, (8), 2411-2418, (2012)
   

Mori K

Kanazawa R et al., Preparation of thermosensitive microgel adsorbent for quick adsorption of heavy metal ions by a temperature change.
Journal of Chemical Engineering of Japan, 37, (6), 804-807, (2004)
   

Mori K et al., A Pretreatment-Free, Polymer-Based Platform Prepared by Molecular Imprinting and Post-Imprinting Modifications for Sensing Intact Exosomes.
Angewandte Chemie International Edition, 58, (6), 1612-1615, (2018)
   

Mori T

Takeuchi T et al., Conjugated-Protein Mimics with Molecularly Imprinted Reconstructible and Transformable Regions that are Assembled Using Space-Filling Prosthetic Groups.
Angewandte Chemie International Edition, 53, (47), 12765-12770, (2014)
   

Komiyama M et al., Molecular Imprinting: Materials Nanoarchitectonics with Molecular Information.
Bulletin of the Chemical Society of Japan, 91, (7), 1075-1111, (2018)
   

Mori Y

Matsuda Y et al., Synthesis of functional capsule gel incorporated with nicotine imprinted polymer and adsorptive characteristic for nicotine.
Journal of the Materials Science Society of Japan, 37, (4), 195-199, (2000)
   

Moriguchi K

Yoshikawa M et al., Proceeding, Chiral recognition ability of oligopeptide derivatives consisiting of glutamyl residues, 
625, (2002)
   

Yoshikawa M et al., Chiral recognition ability of oligopeptide derivatives consisting of glutamyl residues.
Journal of Applied Polymer Science, 95, (6), 1302-1309, (2005)
   

Morihara K

Morihara K et al., Footprint catalysis .2. Molecular recognition of footprint catalytic sites.
Bulletin of the Chemical Society of Japan, 61, (11), 3999-4003, (1988)
   

Morihara K et al., Footprint catalysis .1. A new method for designing tailor-made catalysts with substrate-specificity - silica (alumina) catalysts for butanolysis of benzoic anhydride.
Bulletin of the Chemical Society of Japan, 61, (11), 3991-3998, (1988)
   

Morihara K et al., Footprint catalysis .3. Inducible alteration of substrate specificities of silica(alumina) gel catalysts for 2, 4-dinitrophenolysis of toluic anhydrides by footprint imprinting.
Bulletin of the Chemical Society of Japan, 62, (2), 499-505, (1989)
   

Matsuishi T et al., Definitive evidence for enantioselective catalysis over molecular footprint catalytic cavities chirally imprinted on a silica(alumina) gel surface.
Chemistry Letters, 21, (10), 1921-1924, (1992)
   

Morihara K et al., Enzyme-like enantioselective catalysis over chiral molecular footprint cavities on a silica (alumina) gel surface.
Journal of the Chemical Society-Chemical Communications, (4), 358-360, (1992)
   

Shimada T et al., Footprint catalysis .4. Structural effects of templates on catalytic behavior of imprinted footprint cavities.
Bulletin of the Chemical Society of Japan, 65, (4), 954-958, (1992)
   

Morihara K et al., Footprint catalysis .6. Chiral molecular footprint catalytic cavities imprinted by a chiral template, bis(N-benzyloxycarbonyl-L-alanyl)Amine, and their stereoselective catalyses.
Bulletin of the Chemical Society of Japan, 66, (3), 906-913, (1993)
   

Morihara K et al., Footprint catalysis .7. Reinvestigation of the imprinting procedures for molecular footprint catalytic cavities - the effects of imprinting procedure temperature on the catalytic characteristics.
Bulletin of the Chemical Society of Japan, 66, (10), 2977-2982, (1993)
   

Morihara K et al., Footprint catalysis .8. Molecular imprinting for footprint cavities on an active clay surface.
Bulletin of the Chemical Society of Japan, 66, (10), 3047-3052, (1993)
   

Shimada T et al., Footprint catalysis .5. Substituent effects of template molecules on the catalytic behavior of imprinted molecular footprint cavities.
Bulletin of the Chemical Society of Japan, 66, (3), 836-840, (1993)
   

Matsuishi T et al., Footprint catalysis 9. Molecular footprint catalytic cavities imprinted with chiral hydantoins - enantioselective hydantoinase mimics.
Bulletin of the Chemical Society of Japan, 67, (3), 748-756, (1994)
   

Morihara K et al., Footprint catalysis .11. Molecular footprint cavities imprinted with chiral amines and their chiral molecular recognition.
Bulletin of the Chemical Society of Japan, 67, (4), 1078-1084, (1994)
   

Shimada T et al., Footprint catalysis .10. Surface modification of molecular footprint catalysts and its effects on their molecular recognition and catalysis.
Bulletin of the Chemical Society of Japan, 67, (1), 227-235, (1994)
   

Morihara K, Molecular recognition over footprint cavities.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 98-98, (1997)
   

Morihara K, Book chapter, Recognition over footprint cavities, 
In: Molecular and Ionic Recognition with Imprinted Polymers, Bartsch RA, Maeda M (Eds.) The American Chemical Society: Washington DC, Ch. 21, 300-313, (1998)
   

Morikawa Y

Hirayama K et al., Synthesis of polymer-coated silica particles with specific recognition sites for glucose oxidase by the molecular imprinting technique.
Chemistry Letters, 27, (8), 731-732, (1998)
   

Morimoto J

Shiraki Y et al., Preparation of Molecule-Responsive Microsized Hydrogels via Photopolymerization for Smart Microchannel Microvalves.
Macromolecular Rapid Communications, 36, (6), 515-519, (2015)
   

Morimoto N

Morimoto N et al., Book chapter, Self-assembled Nanogel Engineering, 
In: Biomedical Applications of Hydrogels Handbook, Park K, Okano T (Eds.) Springer New York: 339-350, (2010)
   

Morin P

Claude B et al., Selective solid-phase extraction of a triterpene acid from a plant extract by molecularly imprinted polymer.
Talanta, 75, (2), 344-350, (2008)
   

Claude B et al., Interest of molecularly imprinted polymers in the fight against doping: Extraction of tamoxifen and its main metabolite from urine followed by high-performance liquid chromatography with UV detection.
Journal of Chromatography A, 1196-1197, (1-2), 81-88, (2008)
   

Claude B et al., Synthesis of a molecularly imprinted polymer for the solid-phase extraction of betulin and betulinic acid from plane bark.
Phytochemical Analysis, 21, (2), 180-185, (2010)
   

Claude B et al., Analysis of urinary neurotransmitters by capillary electrophoresis: Sensitivity enhancement using field-amplified sample injection and molecular imprinted polymer solid phase extraction.
Analytica Chimica Acta, 699, (2), 242-248, (2011)
   

Lopez C et al., Synthesis and study of a molecularly imprinted polymer for specific solid-phase extraction of vinflunine and its metabolite from biological fluids.
Journal of Separation Science, 34, (15), 1902-1909, (2011)
   

Lopez C et al., Synthesis and study of a molecularly imprinted polymer for the specific extraction of indole alkaloids from Catharanthus roseus extracts.
Analytica Chimica Acta, 683, (2), 198-205, (2011)
   

Quesada-Molina C et al., Convenient solid phase extraction of cephalosporins in milk using a molecularly imprinted polymer.
Food Chemistry, 135, (2), 775-779, (2012)
   

Claude B et al., Selective solid-phase extraction of catecholamines and metanephrines from serum using a new molecularly imprinted polymer.
Journal of Liquid Chromatography & Related Technologies, 37, (18), 2624-2638, (2014)
   

Puzio K et al., Molecularly imprinted polymer dedicated to the extraction of glyphosate in natural waters.
Journal of Chromatography A, 1361, 1-8, (2014)
   

Berho C et al., Laboratory calibration of a POCIS-like sampler based on molecularly imprinted polymers for glyphosate and AMPA sampling in water.
Analytical and Bioanalytical Chemistry, 409, (8), 2029-2035, (2017)
   

Claude B et al., Preliminary recovery study of a commercial molecularly imprinted polymer for the extraction of glyphosate and AMPA in different environmental waters using MS.
Environmental Science and Pollution Research, 24, (13), 12293-12300, (2017)
   

Claude B et al., Synthesis and Preliminary Assays of a Novel Molecularly Imprinted Polymer Dedicated to the Extraction of Carbamazepine from River Water.
Chromatography and Spectroscopy Techniques, 1, (1), 3-11, (2018)
   

Moring SE

Moring SE et al., Target specific sample preparation from aqueous extracts with molecular imprinted polymers.
Journal of Pharmaceutical and Biomedical Analysis, 27, (5), 719-728, (2002)
   

Morini F

Barbani N et al., Intelligent molecularly imprinted scaffolds for tissue growth technology.
Journal of Applied Biomaterials & Biomechanics, 7, (1), 53-53, (2009)
   

Morishige T

Mori K et al., A Pretreatment-Free, Polymer-Based Platform Prepared by Molecular Imprinting and Post-Imprinting Modifications for Sensing Intact Exosomes.
Angewandte Chemie International Edition, 58, (6), 1612-1615, (2018)
   

Morishige T et al., Post-Imprinting-Modified Molecularly Imprinted Nanocavities with Two Synergetic, Orthogonal, Glycoprotein-Binding Sites to Transduce Binding Events into Fluorescence Changes.
ChemNanoMat, 5, (2), 224-229, (2019)
   

Morishima Y

Wybranska K et al., Adenine Molecularly Imprinted Polymer-Coated Submicrometer Silica Gel Particles.
Chemistry of Materials, 22, (18), 5392-5399, (2010)
   

Plewa A et al., Molecularly Imprinted Hybrid Adsorbents for Adenine and Adenosine-5'-triphosphate.
Journal of Medicinal Chemistry, 55, (20), 8712-8720, (2012)
   

Morishita T

Cheubong C et al., Molecularly Imprinted Nanogels Capable of Porcine Serum Albumin Detection in Raw Meat Extract for Halal Food Control.
Analytical Chemistry, 92, (9), 6401-6407, (2020)
   

Morissette P

Morissette P et al., A specific artificial antibody toward mycophenolic acid prepared by molecular imprinting.
Clinical Chemistry, 46, (9), 1516-1518, (2000)
   

Morita M

Morita M et al., Selective electrochemical detection of catechol and catecholamines on modified electrodes with molecular template.
Denki Kagaku, 64, 1239-1243, (1996)
   

Morita M et al., Interdigitated array microelectrodes as electrochemical sensors.
Electrochimica Acta, 42, (20-22), 3177-3183, (1997)
   

Watabe Y et al., Improved detectability with a polymer-based trapping device in rapid HPLC analysis for ultra-low levels of bisphenol A (BPA) in environmental samples.
Analytical Sciences, 20, (1), 133-137, (2004)
   

Watabe Y et al., Novel surface-modified molecularly imprinted polymer focused on the removal of interference in environmental water samples.
Chemistry Letters, 33, (7), 806-807, (2004)
   

Watabe Y et al., Determination of bisphenol A in environmental water at ultra-low level by high-performance liquid chromatography with an effective on-line pretreatment device.
Journal of Chromatography A, 1032, (1-2), 45-49, (2004)
   

Watabe Y et al., Reducing bisphenol A contamination from analytical procedures to determine ultralow levels in environmental samples using automated HPLC microanalysis.
Analytical Chemistry, 76, (1), 105-109, (2004)
   

Watabe Y et al., LC/MS determination of bisphenol A in river water using a surface-modified molecularly-imprinted polymer as an on-line pretreatment device.
Analytical and Bioanalytical Chemistry, 381, (6), 1193-1198, (2005)
   

Watabe Y et al., Novel surface modified molecularly imprinted polymer focused on the removal of interference in environmental water samples for chromatographic determination.
Journal of Chromatography A, 1073, (1-2), 363-370, (2005)
   

Watabe Y et al., Shielded molecularly imprinted polymers prepared with a selective surface modification.
Journal of Polymer Science Part A: Polymer Chemistry, 43, (10), 2048-2060, (2005)
   

Morita Y

Yoshikawa M et al., Relationship between enantioselectivity of alternative molecularly imprinted polymeric membranes and species of amino acid residues composing chiral recognition sites.
Bioseparation, 10, (6), 323-330, (2002)
   

Kondo Y et al., Effect of constituting amino acid residue numbers on molecularly imprinted chiral recognition sites.
Chirality, 15, (6), 498-503, (2003)
   

Moritani T

Moritani T et al., Conformational imprinting effect on stimuli-sensitive gels made with an "Imprinter" monomer.
Macromolecules, 34, (22), 7796-7803, (2001)
   

Moro AJ

Suriyanarayanan S et al., Book chapter, Chemosensors Based on Molecularly Imprinted Polymers, 
In: Molecular Imprinting, Haupt K (Ed.) Springer: Berlin / Heidelberg, 165-265, (2012)
   

Moro CC

Benvenutti EV et al., Silica based hybrid materials obtained by the sol-gel method.
Quimica Nova, 32, (7), 1926-1933, (2009)
   

Moro G

Moro G et al., Conductive imprinted polymers for the direct electrochemical detection of [beta]-lactam antibiotics: The case of cefquinome.
Sensors and Actuators B: Chemical, 297, Article126786-(2019)
   

Moroni L

Criscenti G et al., Soft-molecular imprinted electrospun scaffolds to mimic specific biological tissues.
Biofabrication, 10, (4), ArticleNo045005-(2018)
   

Perez-Puyana V et al., (Macro)Molecular Imprinting of Proteins on PCL Electrospun Scaffolds.
ACS Applied Materials & Interfaces, 13, (25), 29293-29302, (2021)
   

Moronkola BA

Awokoya KN et al., Molecularly Imprinted Polymer for the Binding and Recognition of Dibenzothiophene.
American Journal of Chemistry, 2, (5), 282-288, (2012)
   

Awokoya KN et al., Molecularly imprinted electrospun nanofibers for adsorption of nickel-5, 10, 15, 20-tetraphenylporphine (NTPP) in organic media.
Journal of Polymer Research, 20, (6), Art No 148 (9 pages)-(2013)
   

Awokoya KN et al., Development of a Styrene Based Molecularly Imprinted Polymer and Its Molecular Recognition Properties of Vanadyl Tetraphenylporphyrin in Organic Media.
International Journal of Polymeric Materials and Polymeric Biomaterials, 63, (2), 107-113, (2013)
   

Morovati H

Jafary Omid N et al., Development of Molecularly Imprinted Olanzapine Nano-particles: In Vitro Characterization and In Vivo Evaluation.
AAPS PharmSciTech, 17, (6), 1457-1467, (2016)
   

Morozova PY

Garkushina IS et al., Equilibrium Sorption of Glucose by Surface Imprinted Organo-Inorganic Sorbents.
Russian Journal of Physical Chemistry A, 95, (9), 1918-1925, (2021)
   

Morrison C

Plotka JM et al., Pharmaceutical and forensic drug applications of chiral supercritical fluid chromatography.
TrAC Trends in Analytical Chemistry, 56, 74-89, (2014)
   

Rutkowska M et al., Application of molecularly imprinted polymers in analytical chiral separations and analysis.
TrAC Trends in Analytical Chemistry, 102, 91-102, (2018)
   

Morrison JL

Morrison JL et al., The nature of the specificity of adsorption of alkyl orange dyes on silica gel.
Canadian Journal of Chemistry - Revue Canadienne de Chimie, 37, 1986-1995, (1959)
   

Morrissey JJ

Abbas A et al., Hot Spot-Localized Artificial Antibodies for Label-Free Plasmonic Biosensing.
Advanced Functional Materials, 23, (14), 1789-1797, (2013)
   

Tian LM et al., Gold nanocages with built-in artificial antibodies for label-free plasmonic biosensing.
Journal of Materials Chemistry B, 2, (2), 167-170, (2014)
   

Luan JY et al., PEGylated Artificial Antibodies: Plasmonic Biosensors with Improved Selectivity.
ACS Applied Materials & Interfaces, 8, (36), 23509-23516, (2016)
   

Hu R et al., Aromatic Functionality of Target Proteins Influences Monomer Selection for Creating Artificial Antibodies on Plasmonic Biosensors.
ACS Applied Materials & Interfaces, 9, (1), 145-151, (2017)
   

Wang CZ et al., Single Molecule Force Spectroscopy to Compare Natural versus Artificial Antibody-Antigen Interaction.
Small, 13, (19), ArticleNo1604255-(2017)
   

Luan JY et al., Environmental Stability of Plasmonic Biosensors Based on Natural versus Artificial Antibody.
Analytical Chemistry, 90, (13), 7880-7887, (2018)
   

Morrow CC

Dai S et al., Imprint coating: A novel synthesis of selective functionalized ordered mesoporous sorbents.
Angewandte Chemie International Edition, 38, (9), 1235-1239, (1999)
   

Dai S et al., Imprint coating: Novel synthesis of selective functionalized ordered mesoporous sorbents.
Abstracts of Papers of the American Chemical Society, 217, (IEC), 234-234, (1999)
   

Morsi I

Abdelghani R et al., Nano-architecture of highly sensitive SnO2-based gas sensors for acetone and ammonia using molecular imprinting technique.
Sensors and Actuators B: Chemical, 297, Article126668-(2019)
   

Mortari B

Mortari B et al., A spot test for direct quantification of acid green 16 adsorbed on a molecularly imprinted polymer through diffuse reflectance measurements.
Analytical Methods, 13, (4), 453-461, (2021)
   

Mortensen N

Nichols P et al., Pharmacokinetics of Molecular Imprinted Hydrogels as Drug Delivery Vehicles.
Biochemistry & Pharmacology, 7, (1), ArticleNo238-(2018)
   

Morthier G

Han XY et al., Recent Progress of Imprinted Polymer Photonic Waveguide Devices and Applications.
Polymers, 10, (6), ArticleNo603-(2018)
   

Morvan ML

Deceuninck Y et al., Development and validation of a specific and sensitive gas chromatography tandem mass spectrometry method for the determination of bisphenol A residues in a large set of food items.
Journal of Chromatography A, 1362, 241-249, (2014)
   

Bousoumah R et al., Development of a molecular recognition based approach for multi-residue extraction of estrogenic endocrine disruptors from biological fluids coupled to liquid chromatography-tandem mass spectrometry measurement.
Analytical and Bioanalytical Chemistry, 407, (29), 8713-8723, (2015)
   

Mosaei Oskoei Y

Hassanzadeh J et al., Selective chemiluminescence method for the determination of trinitrotoluene based on molecularly imprinted polymer-capped ZnO quantum dots.
New Journal of Chemistry, 41, (19), 10659-10667, (2017)
   

Mosalam M

Mosalam M et al., Removal of Atrazine Herbicide from Contaminated Water Using Molecularly Imprinted Nano-polymer.
Egyptian Journal of Chemical and Environmental Health, 2, (2), 490-499, (2016)
   

Mosbach K

Arshady R et al., Synthesis of substrate-selective polymers by host-guest polymerization.
Macromolecular Chemistry And Physics, 182, (2), 687-692, (1981)
   

Andersson L et al., Imprinting of amino-acid derivatives in macroporous polymers.
Tetrahedron Letters, 25, (45), 5211-5214, (1984)
   

Norrlöw O et al., Acrylic polymer preparations containing recognition sites obtained by imprinting with substrates.
Journal of Chromatography, 299, (1), 29-41, (1984)
   

Andersson L et al., Synthesis of a new amino-acid based cross-linker for preparation of substrate selective acrylic polymers.
Tetrahedron Letters, 26, (30), 3623-3624, (1985)
   

Glad M et al., Use of silane monomers for molecular imprinting and enzyme entrapment in polysiloxane-coated porous silica.
Journal of Chromatography, 347, (1), 11-23, (1985)
   

Sellergren B et al., Molecular imprinting of amino-acid derivatives in macroporous polymers - demonstration of substrate-selectivity and enantio-selectivity by chromatographic resolution of racemic mixtures of amino-acid derivatives.
Journal of Chromatography, 347, (1), 1-10, (1985)
   

Leonhardt A et al., Enzyme-mimicking polymers exhibiting specific substrate binding and catalytic functions.
Reactive Polymers, Ion Exchangers, Sorbents, 6, (2-3), 285-290, (1987)
   

Månsson MO et al., Improved chromatography - prearranged distances between boronate groups by the molecular imprinting approach.
Biological Chemistry Hoppe-Seyler, 368, (7), 761-761, (1987)
   

Norrlöw O et al., Improved chromatography - prearranged distances between boronate groups by the molecular imprinting approach.
Journal of Chromatography, 396, (1), 374-377, (1987)
   

Andersson LI et al., Studies on guest selective molecular recognition on an octadecyl silylated silicon surface using ellipsometry.
Tetrahedron Letters, 29, (42), 5437-5440, (1988)
   

Mosbach K, Novel affinity techniques.
BioMedia, 1, (1), 3-5, (1988)
   

Mosbach K, Novel approaches to affinity-chromatography.
Makromolekulare Chemie-Macromolecular Symposia, 17, (1), 325-333, (1988)
   

Sellergren B et al., Highly enantioselective and substrate-selective polymers obtained by molecular imprinting utilizing noncovalent interactions - NMR and chromatographic studies on the nature of recognition.
Journal of the American Chemical Society, 110, (17), 5853-5860, (1988)
   

Sellergren B et al., Enantio-selective and substrate-selective macroporous polymers by molecular imprinting.
Reactive Polymers, Ion Exchangers, Sorbents, 9, (1), 125-125, (1988)
   

Andersson LI et al., Molecular imprinting of the coenzyme-substrate analog N-pyridoxyl-L-phenylalaninanilide.
Makromolekulare Chemie-Rapid Communications, 10, (9), 491-495, (1989)
   

Ekberg B et al., Molecular imprinting - a technique for producing specific separation materials.
Trends In Biotechnology, 7, (4), 92-96, (1989)
   

Moradian A et al., Preparation of a functional, highly selective polymer by molecular imprinting. A demonstration with L-p-aminophenylalanine anilide as a template molecule allowing multiple points of attachment.
Journal of Molecular Recognition, 2, (4), 167-169, (1989)
   

O’Shannessy DJ et al., Molecular imprinting of amino-acid derivatives at low-temperature (0°C) Using photolytic homolysis of azobisnitriles.
Analytical Biochemistry, 177, (1), 144-149, (1989)
   

O’Shannessy DJ et al., Molecular recognition in synthetic polymers. Enantiomeric resolution of amide derivatives of amino acids on molecularly imprinted polymers.
Journal of Molecular Recognition, 2, (1), 1-5, (1989)
   

O’Shannessy DJ et al., Recent advances in the preparation and use of molecularly imprinted polymers for enantiomeric resolution of amino-acid derivatives.
Journal of Chromatography, 470, (2), 391-399, (1989)
   

Robinson DK et al., Molecular imprinting of a transition-state analog leads to a polymer exhibiting esterolytic activity.
Journal of the Chemical Society-Chemical Communications, (14), 969-970, (1989)
   

Andersson LI et al., Enantiomeric resolution on molecularly imprinted polymers prepared with only noncovalent and nonionic interactions.
Journal of Chromatography A, 516, (2), 313-322, (1990)
   

Andersson LI et al., Enantiomeric resolution of amino-acid derivatives on molecularly imprinted polymers as monitored by potentiometric measurements.
Journal of Chromatography A, 516, (2), 323-331, (1990)
   

Andersson LI et al., Molecular recognition in synthetic-polymers - preparation of chiral stationary phases by molecular imprinting of amino-acid amides.
Journal of Chromatography A, 513, (1), 167-179, (1990)
   

Ståhl M et al., The synthesis of a d-amino-acid ester in an organic media with a-chymotrypsin modified by a bio-imprinting procedure.
Biotechnology Letters, 12, 161-166, (1990)
   

Fischer L et al., Direct enantioseparation of b-adrenergic blockers using a chiral stationary phase prepared by molecular imprinting.
Journal of the American Chemical Society, 113, (24), 9358-9360, (1991)
   

Kempe M et al., Binding-studies on substrate-and enantio-selective molecularly imprinted polymers.
Analytical Letters, 24, (7), 1137-1145, (1991)
   

Rosatzin T et al., Preparation of Ca2+ selective sorbents by molecular imprinting using polymerizable ionophores.
Journal of the Chemical Society-Perkin Transactions 2, (8), 1261-1265, (1991)
   

Ståhl M et al., Induced stereoselectivity and substrate selectivity of bio-imprinted a-chymotrypsin in anhydrous organic media.
Journal of the American Chemical Society, 113, (24), 9366-9368, (1991)
   

Andersson LI et al., Book chapter, Bioseparation and catalysis in molecularly imprinted polymers, 
In: Molecular Interactions in Bioseparations, Ngo TT (Ed.) Plenum Press: New York, Ch. 24, 383-394, (1993)
   

Hedborg E et al., Some studies of molecularly-imprinted polymer membranes in combination with field-effect devices.
Sensors and Actuators A-Physical, 37-8, 796-799, (1993)
   

Kempe M et al., Chiral separation using molecularly imprinted heteroatomic polymers.
Journal of Molecular Recognition, 6, (1), 25-29, (1993)
   

Müller R et al., Molecularly imprinted polymers facilitating a b-elimination reaction.
Makromolekulare Chemie-Rapid Communications, 14, (10), 637-641, (1993)
   

Ramström O et al., Recognition sites incorporating both pyridinyl and carboxy functionalities prepared by molecular imprinting.
Journal of Organic Chemistry, 58, (26), 7562-7564, (1993)
   

Ståhl M et al., Bio-imprinting changes the stereospecificity of l-amino-acid oxidase from crotalus-adamanteus in organic-solvents.
Protein Engineering, 6, (Supplement), 51-51, (1993)
   

Vlatakis G et al., Drug assay using antibody mimics made by molecular imprinting.
Nature, 361, (6413), 645-647, (1993)
   

Andersson LI et al., Book chapter, Molecular imprinting - A versatile technique for the preparation of separation materials of predetermined selectivity, 
In: Highly selective separations in biotechnology, Street G (Ed.) Blackie: London, Ch. 9, 207-225, (1994)
   

Kempe M et al., Chiral recognition of N-a-protected amino-acids and derivatives in noncovalently molecularly imprinted polymers.
International Journal of Peptide and Protein Research, 44, 603-606, (1994)
   

Kempe M et al., Direct resolution of naproxen on a noncovalently molecularly imprinted chiral stationary-phase.
Journal of Chromatography A, 664, (2), 276-279, (1994)
   

Kriz D et al., Thin-layer chromatography based on the molecular imprinting technique.
Analytical Chemistry, 66, (17), 2636-2639, (1994)
   

Mayes AG et al., Sugar binding polymers showing high anomeric and epimeric discrimination obtained by noncovalent molecular imprinting.
Analytical Biochemistry, 222, (2), 483-488, (1994)
   

Mosbach K, The technique of molecular imprinting in the formation of antibody mimics, and their applications to the analysis of pesticides.
Abstracts of Papers of the American Chemical Society, 207, (AGRO), 149-149, (1994)
   

Mosbach K, Molecular imprinting.
Trends In Biochemical Sciences, 19, (1), 9-14, (1994)
   

Ramström O et al., Synthetic peptide receptor mimics - highly stereoselective recognition in noncovalent molecularly imprinted polymers.
Tetrahedron: Asymmetry, 5, (4), 649-656, (1994)
   

Andersson LI et al., Mimics of the binding-sites of opioid receptors obtained by molecular imprinting of enkephalin and morphine.
Proceedings of the National Academy of Sciences of the United States of America, 92, (11), 4788-4792, (1995)
   

Andersson LI et al., Book chapter, Antibody mimics obtained by noncovalent molecular imprinting, 
In: Immunoassays of Agrochemicals, Karu AE, Nelson JO, Wong RB (Eds.) The American Chemical Society: Washington DC, Ch. 6, 89-96, (1995)
   

Ansell R et al., Molecularly imprinted polymers - New tools for biomedical science.
Pharmaceutical News, 3, (2), 16-20, (1995)
   

Glad M et al., Molecularly imprinted composite polymers based on trimethylolpropane trimethacrylate (TRIM) Particles for efficient enantiomeric separations.
Reactive Polymers, 25, (1), 47-54, (1995)
   

Johansson A et al., Horse liver alcohol-dehydrogenase can accept NADP+ as coenzyme in high-concentrations of acetonitrile.
European Journal of Biochemistry, 227, (1-2), 551-555, (1995)
   

Kempe M et al., Molecular imprinting used for chiral separations.
Journal of Chromatography A, 694, (1), 3-13, (1995)
   

Kempe M et al., Separation of amino-acids, peptides and proteins on molecularly imprinted stationary phases.
Journal of Chromatography A, 691, (1-2), 317-323, (1995)
   

Kempe M et al., An approach towards surface imprinting using the enzyme ribonuclease A.
Journal of Molecular Recognition, 8, (1-2), 35-39, (1995)
   

Kempe M et al., Receptor-binding mimetics - a novel molecularly imprinted polymer.
Tetrahedron Letters, 36, (20), 3563-3566, (1995)
   

Kriz D et al., Competitive amperometric morphine sensor-based on an agarose immobilized molecularly imprinted polymer.
Analytica Chimica Acta, 300, (1-3), 71-75, (1995)
   

Kriz D et al., Introducing biomimetic sensors based on molecularly imprinted polymers as recognition elements.
Analytical Chemistry, 67, (13), 2142-2144, (1995)
   

Kriz D et al., Preparation and characterization of composite polymers exhibiting both selective molecular recognition and electrical conductivity.
Biomimetics, 3, (2), 81-90, (1995)
   

Mosbach K, Molecular imprinting - molecularly imprinted polymers - their use in enantiomeric resolution, as antibody-binding mimics and as catalysis.
Protein Engineering, 8, 54-54, (1995)
   

Nicholls IA et al., Recognition and enantioselection of drugs and biochemicals using molecularly imprinted polymer technology.
Trends In Biotechnology, 13, (2), 47-51, (1995)
   

Nicholls IA et al., Insights into the role of the hydrogen-bond and hydrophobic effect on recognition in molecularly imprinted polymer synthetic peptide receptor mimics.
Journal of Chromatography A, 691, (1-2), 349-353, (1995)
   

Nilsson KGI et al., Molecular imprinting of acetylated carbohydrate-derivatives into methacrylic polymers.
Journal of Chromatography A, 707, (2), 199-203, (1995)
   

Andersson HS et al., Study of the nature of recognition in molecularly imprinted polymers.
Journal of Molecular Recognition, 9, (5-6), 675-682, (1996)
   

Andersson LI et al., Book chapter, Molecular Imprinting: The current status and future development of polymer-based recognition systems, 
In: Biochemical Technology, Part B, Bittar EE, Danielsson B, Bulow L (Eds.) Elsevier: Amsterdam, Ch. 32, 651-670, (1996)
   

Andersson LI et al., Molecular imprinting of the endogenous neuropeptide Leu(5)-enkephalin and some derivatives thereof.
Macromolecular Rapid Communications, 17, (1), 65-71, (1996)
   

Ansell RJ et al., Towards artificial antibodies prepared by molecular imprinting.
Clinical Chemistry, 42, (9), 1506-1512, (1996)
   

Ansell RJ et al., Molecularly imprinted polymers for bioanalysis: Chromatography, binding assays and biomimetic sensors.
Current Opinion in Biotechnology, 7, (1), 89-94, (1996)
   

Berglund J et al., Recognition in molecularly imprinted polymer a2-adrenoreceptor mimics.
Bioorganic & Medicinal Chemistry Letters, 6, (18), 2237-2242, (1996)
   

Kriz D et al., Introduction of molecularly imprinted polymers as recognition elements in conductometric chemical sensors.
Sensors and Actuators B: Chemical, 33, (1-3), 178-181, (1996)
   

Liu XC et al., A tailor-made catalyst for Diels-Alder reaction.
Abstracts of Papers of the American Chemical Society, 212, (OLY), 254-254, (1996)
   

Matsui J et al., Metal ion mediated recognition in molecularly imprinted polymers.
Analytica Chimica Acta, 335, (1-2), 71-77, (1996)
   

Matsui J et al., Carbon-carbon bond formation using substrate selective catalytic polymers prepared by molecular imprinting: An artificial class II aldolase.
Journal of Organic Chemistry, 61, (16), 5414-5417, (1996)
   

Mayes AG et al., Molecularly imprinted polymer beads: Suspension polymerization using a liquid perfluorocarbon as the dispersing phase.
Analytical Chemistry, 68, (21), 3769-3774, (1996)
   

Mosbach K et al., The emerging technique of molecular imprinting and its future impact on biotechnology.
Bio/Technology, 14, 163-170, (1996)
   

Nicholls IA et al., Some recent developments in the preparation of novel recognition systems: A recognition site for the selective catalysis of an aldol condensation using molecular imprinting and specific affinity motifs for a-chymotrypsin using a phage display peptide library.
Journal of Molecular Recognition, 9, (5-6), 652-657, (1996)
   

Ramström O et al., Artificial antibodies to corticosteroids prepared by molecular imprinting.
Chemistry & Biology, 3, (6), 471-477, (1996)
   

Ramström O et al., Chiral recognition in adrenergic receptor binding mimics prepared by molecular imprinting.
Journal of Molecular Recognition, 9, (5-6), 691-696, (1996)
   

Siemann M et al., Selective recognition of the herbicide atrazine by noncovalent molecularly imprinted polymers.
Journal of Agricultural and Food Chemistry, 44, (1), 141-145, (1996)
   

Ansell RJ et al., Molecularly imprinted polymers by suspension polymerisation in perfluorocarbon liquids, with emphasis on the influence of the porogenic solvent.
Journal of Chromatography A, 787, (1-2), 55-66, (1997)
   

Haupt K et al., Binding assays for drugs and herbicides using molecularly imprinted polymer particles as recognition elements in different assay formats.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 32-32, (1997)
   

Kriz D et al., Molecular imprinting - New possibilities for sensor technology.
Analytical Chemistry, 69, A345-A349, (1997)
   

Liu XC et al., Novel separation material suitable for both boronate affinity chromatography and immobilized metal affinity chromatography.
Abstracts of Papers of the American Chemical Society, 213, (BIOT), 157-157, (1997)
   

Liu XC et al., Studies towards a tailor-made catalyst for the Diels-Alder reaction using the technique of molecular imprinting.
Macromolecular Rapid Communications, 18, (7), 609-615, (1997)
   

Mayes AG et al., Molecularly imprinted polymers: useful materials for analytical chemistry?
TrAC Trends in Analytical Chemistry, 16, (6), 321-332, (1997)
   

Mosbach K, The emerging technique of molecular imprinting and its future impact on biotechnology.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 111-111, (1997)
   

Senholdt M et al., Determination of cyclosporin A and metabolites total concentration using a molecularly imprinted polymer based radioligand binding assay.
Analytical Letters, 30, (10), 1809-1821, (1997)
   

Siemann M et al., Separation and detection of macrolide antibiotics by HPLC using macrolide-imprinted synthetic polymers as stationary phases.
Journal of Antibiotics, 50, (1), 89-91, (1997)
   

Yu C et al., Molecular imprinting utilizing an amide functional group for hydrogen bonding leading to highly efficient polymers.
Journal of Organic Chemistry, 62, (12), 4057-4064, (1997)
   

Yu C et al., Enantiomeric recognition by molecularly imprinted polymers using hydrophobic interactions.
Analytical Letters, 30, (12), 2123-2140, (1997)
   

Ansell RJ et al., Magnetic molecularly imprinted polymer beads for drug radioligand binding assay.
Analyst, 123, (7), 1611-1616, (1998)
   

Berglund J et al., Selection of phage display combinatorial library peptides with affinity for a yohimbine imprinted methacrylate polymer.
Analytical Communications, 35, (1), 3-7, (1998)
   

Cormack P et al., Molecularly imprinted polymers for application in chemical analysis.
American Biotechnology Laboratory, 16, (6), 47-48, (1998)
   

Haupt K et al., Assay system for the herbicide 2, 4-dichlorophenoxyacetic acid using a molecularly imprinted polymer as an artificial recognition element.
Analytical Chemistry, 70, (3), 628-631, (1998)
   

Haupt K et al., Plastic antibodies: developments and applications.
Trends In Biotechnology, 16, (11), 468-475, (1998)
   

Haupt K et al., Herbicide assay using an imprinted polymer based system analogous to competitive fluoroimmunoassays.
Analytical Chemistry, 70, (18), 3936-3939, (1998)
   

Liu XC et al., Catalysis of benzisoxazole isomerization by molecularly imprinted polymers.
Macromolecular Rapid Communications, 19, (12), 671-674, (1998)
   

Mosbach K et al., Some new developments and challenges in non-covalent molecular imprinting technology.
Journal of Molecular Recognition, 11, (1-6), 62-68, (1998)
   

Mosbach K et al., Book chapter, Molecular imprinting: Status artis et quo vadere?, 
In: Molecular and Ionic Recognition with Imprinted Polymers, Bartsch RA, Maeda M (Eds.) The American Chemical Society: Washington DC, Ch. 3, 29-48, (1998)
   

Ramström O et al., Applications of molecularly imprinted materials as selective adsorbents: Emphasis on enzymatic equilibrium shifting and library screening.
Chromatographia, 47, (7-8), 465-469, (1998)
   

Ramström O et al., Screening of a combinatorial steroid library using molecularly imprinted polymers.
Analytical Communications, 35, (1), 9-11, (1998)
   

Sabourin L et al., Molecularly imprinted polymer combinatorial libraries for multiple simultaneous chiral separations.
Analytical Communications, 35, (9), 285-287, (1998)
   

Ye L et al., Molecularly imprinted polymeric adsorbents for byproduct removal.
Analytical Chemistry, 70, (14), 2789-2795, (1998)
   

Ye L et al., A new application of molecularly imprinted materials.
Journal of Molecular Recognition, 11, (1-6), 75-78, (1998)
   

Yu C et al., Insights into the origins of binding and the recognition properties of molecularly imprinted polymers prepared using an amide as the hydrogen-bonding functional group.
Journal of Molecular Recognition, 11, (1-6), 69-74, (1998)
   

Andersson HS et al., Study of the nature of recognition in molecularly imprinted polymers, II [1] - Influence of monomer-template ratio and sample load on retention and selectivity.
Journal of Chromatography A, 848, (1-2), 39-49, (1999)
   

Cormack PAG et al., Molecular imprinting: recent developments and the road ahead.
Reactive and Functional Polymers, 41, (1-3), 115-124, (1999)
   

Haupt K et al., Molecularly imprinted polymers in chemical and biological sensing.
Biochemical Society Transactions, 27, 344-350, (1999)
   

Jakusch M et al., Molecularly imprinted polymers and infrared evanescent wave spectroscopy. A chemical sensors approach.
Analytical Chemistry, 71, (20), 4786-4791, (1999)
   

Kröger S et al., Imprinted polymer based sensor system for herbicides using differential-pulse voltammetry on screen printed electrodes.
Analytical Chemistry, 71, (17), 3698-3702, (1999)
   

Liu XC et al., Catalysis of benzisoxazole isomerization by molecularly imprinted polymers.
Abstracts of Papers of the American Chemical Society, 217, (BTEC), 66-66, (1999)
   

Ramström O et al., Synthesis and catalysis by molecularly imprinted materials.
Current Opinion in Chemical Biology, 3, (6), 759-764, (1999)
   

Ye L et al., Molecularly imprinted monodisperse microspheres for competitive radioassay.
Analytical Communications, 36, (2), 35-38, (1999)
   

Ye L et al., Use of molecularly imprinted polymers in a biotransformation process.
Biotechnology and Bioengineering, 64, (6), 650-655, (1999)
   

Yilmaz E et al., Influence of functional and cross-linking monomers and the amount of template on the performance of molecularly imprinted polymers in binding assays.
Analytical Communications, 36, (5), 167-170, (1999)
   

Brüggemann O et al., New configurations and applications of molecularly imprinted polymers.
Journal of Chromatography A, 889, (1-2), 15-24, (2000)
   

Cormack PAG et al., Book chapter, Affinity Separation | Imprint Polymers, 
In: Encyclopedia of Separation Science, Wilson ID, Adlard TR, Poole CF, Cook M (Eds.) Elsevier Ltd: Oxford, 288-296, (2000)
   

Haupt K et al., Molecularly imprinted polymers and their use in biomimetic sensors.
Chemical Reviews, 100, (7), 2495-2504, (2000)
   

Surugiu I et al., An enzyme-linked molecularly imprinted sorbent assay.
Analyst, 125, (1), 13-16, (2000)
   

Ye L et al., Synthesis and characterization of molecularly imprinted microspheres.
Macromolecules, 33, (22), 8239-8245, (2000)
   

Yilmaz E et al., The use of immobilized templates - A new approach in molecular imprinting.
Angewandte Chemie International Edition, 39, (12), 2115-2118, (2000)
   

Yu C et al., Influence of mobile phase composition and cross-linking density on the enantiomeric recognition properties of molecularly imprinted polymers.
Journal of Chromatography A, 888, (1-2), 63-72, (2000)
   

Janotta M et al., Molecularly imprinted polymers for nitrophenols - An advanced separation material for environmental analysis.
International Journal of Environmental Analytical Chemistry, 80, (2), 75-86, (2001)
   

Mosbach K et al., Generation of new enzyme inhibitors using imprinted binding sites: The anti-idiotypic approach, a step toward the next generation of molecular imprinting.
Journal of the American Chemical Society, 123, (49), 12420-12421, (2001)
   

Mosbach K, Toward the next generation of molecular imprinting with emphasis on the formation, by direct molding, of compounds with biological activity (biomimetics).
Analytica Chimica Acta, 435, (1), 3-8, (2001)
   

Mosbach K, Towards the development of artificial recognition elements in sensor technology vision with emphasis on molecular imprinting.
Electrochemistry, 69, (12), 919-919, (2001)
   

Surugiu I et al., Chemiluminescence imaging ELISA using an imprinted polymer as the recognition element instead of an antibody.
Analytical Chemistry, 73, (3), 487-491, (2001)
   

Yamazaki T et al., A novel amperometric sensor for organophosphotriester insecticides detection employing catalytic polymer mimicking phosphotriesterase catalytic center.
Electrochemistry, 69, (12), 969-972, (2001)
   

Yamazaki T et al., Towards the use of molecularly imprinted polymers containing imidazoles and bivalent metal complexes for the detection and degradation of organophosphotriester pesticides.
Analytica Chimica Acta, 435, (1), 209-214, (2001)
   

Ye L et al., Polymers recognizing biomolecules based on a combination of molecular imprinting and proximity scintillation: A new sensor concept.
Journal of the American Chemical Society, 123, (12), 2901-2902, (2001)
   

Ye L et al., Molecular imprinting on microgel spheres.
Analytica Chimica Acta, 435, (1), 187-196, (2001)
   

Ye L et al., Towards the development of molecularly imprinted artificial receptors for the screening of estrogenic chemicals.
Analyst, 126, (6), 760-765, (2001)
   

Ye L et al., Molecularly imprinted microspheres as antibody binding mimics.
Reactive and Functional Polymers, 48, (1-3), 149-157, (2001)
   

Ye L et al., The technique of molecular imprinting - Principle, state of the art, and future aspects.
Journal of Inclusion Phenomena and Macrocyclic Chemistry, 41, (1-4), 107-113, (2001)
   

Yilmaz E et al., Book chapter, The use of imprinted polymers as recognition elements in biosensors and binding assays, 
In: Novel Approaches In Biosensors And Rapid Diagnostic Assays, Liron Z, Bromberg A, Fisher M (Eds.) Kluwer Academic/Plenum Publishers: New York, Ch. 14, 193-209, (2001)
   

Yilmaz E et al., A facile method for preparing molecularly imprinted polymer spheres using spherical silica templates.
Journal of Materials Chemistry, 12, (5), 1577-1581, (2002)
   

Yu YH et al., Formation of a class of enzyme inhibitors (drugs), including a chiral compound, by using imprinted polymers or biomolecules as molecular-scale reaction vessels.
Angewandte Chemie International Edition, 41, (23), 4459-4463, (2002)
   

Yu YH et al., Removal of the fermentation by-product succinyl L-tyrosine from the b-lactamase inhibitor clavulanic acid using a molecularly imprinted polymer.
Biotechnology and Bioengineering, 79, (1), 23-28, (2002)
   

Lettau K et al., An esterolytic imprinted polymer prepared via a silica-supported transition state analogue.
Chemistry of Materials, 16, 2745-2749, (2004)
   

Schmidt RH et al., A simple method for spin-coating molecularly imprinted polymer films of controlled thickness and porosity.
Advanced Materials, 16, (8), 719-722, (2004)
   

Gavioli E et al., Analyte templating: Enhancing the enantioselectivity of chiral selectors upon incorporation into organic polymer environments.
Analytical Chemistry, 77, (15), 5009-5018, (2005)
   

Yilmaz E et al., Book chapter, The noncovalent approach, 
In: Molecularly Imprinted Materials: Science and Technology, Yan M, Ramström O (Eds.) Marcel Dekker: New York, Ch. 3, 25-57, (2005)
   

Boonpangrak S et al., Preparation of molecularly imprinted polymers using nitroxide-mediated living radical polymerization.
Biosensors and Bioelectronics, 22, (3), 349-354, (2006)
   

Mosbach K, The promise of molecular imprinting.
Scientific American, 295, (4), 86-91, (2006)
   

Zhang H et al., MIP for Regioselective Huisgen 1, 3-Dipolar Cycloaddition Reaction.
Synfacts, (7), 0742-0742, (2006)
   

Zhang HQ et al., Non-covalent molecular imprinting with emphasis on its application in separation and drug development.
Journal of Molecular Recognition, 19, (4), 248-259, (2006)
   

Zhang HQ et al., Molecularly imprinted nanoreactors for regioselective Huisgen 1, 3-dipolar cycloaddition reaction.
Journal of the American Chemical Society, 128, (13), 4178-4179, (2006)
   

Yoshimatsu K et al., Uniform molecularly imprinted microspheres and nanoparticles prepared by precipitation polymerization: The control of particle size suitable for different analytical applications.
Analytica Chimica Acta, 584, (1), 112-121, (2007)
   

Ye L et al., Molecular Imprinting: Synthetic Materials As Substitutes for Biological Antibodies and Receptors.
Chemistry of Materials, 20, (3), 859-868, (2008)
   

Allender C et al., MIP2008 Kobe, Japan, September 2008.
Biosensors and Bioelectronics, 25, (3), 539-542, (2009)
   

Yoshimatsu K et al., Corrigendum to "Uniform molecularly imprinted microspheres and nanoparticles prepared by precipitation polymerization: The control of particle size suitable for different analytical applications" [Anal. Chim. Acta 584 (2007) 112-121].
Analytica Chimica Acta, 657, (2), 215-215, (2010)
   

Dechtrirat D et al., Book chapter, Catalytically Active MIP Architectures, 
In: Molecularly Imprinted Catalysts: Principles, Syntheses and Applications, Li SJ, Cao SS, Piletsky SA, Turner APF (Eds.) Elsevier: Amsterdam, Ch. 2, 19-34, (2016)
   

Moscarelli P

Carbone ME et al., Interactions between elastin-like peptides and an insulating poly(ortho-aminophenol) membrane investigated by AFM and XPS.
Analytical and Bioanalytical Chemistry, 410, (20), 4925-4941, (2018)
   

Moscipan M

Moscipan M et al., Methods for extraction, preconcentration and determination of phenolic compounds in environmental and food samples.
Przemysl Chemiczny, 90, (5), 932-937, (2011)
   

Poliwoda A et al., Application of Molecular Imprinted Polymers for Selective Solid Phase Extraction of Bisphenol A.
Ecological Chemistry and Engineering S, 23, (4), 651-664, (2016)
   

Moscoso R

Jara-Ulloa P et al., Polypyrrole Molecularly Imprinted Modified Glassy Carbon Electrode for the Recognition of Gallic Acid.
Journal of The Electrochemical Society, 160, (4), H243-H246, (2013)
   

Moselhy WA

Hassan AHA et al., Electrochemical sensing of methyl parathion on magnetic molecularly imprinted polymer.
Biosensors and Bioelectronics, 118, 181-187, (2018)
   

Hassan AHA et al., Biomimetic magnetic sensor for electrochemical determination of scombrotoxin in fish.
Talanta, 194, 997-1004, (2019)
   

Mosepele K

Mokgadi J et al., Pressurized hot water extraction coupled to molecularly imprinted polymers for simultaneous extraction and clean-up of pesticides residues in edible and medicinal plants of the Okavango Delta, Botswana.
Molecular Imprinting, 1, (1), 55-64, (2013)
   

Mosey J

Mercado C et al., Imprinted polymers for the removal of hydrophobic compounds from wastewater.
Abstracts of Papers of the American Chemical Society, 235, (ENVR), 18-(2008)
   

Mosha D

Busch D et al., Exploiting ultra tight-binding ligands for separations technologies.
Abstracts of Papers of the American Chemical Society, 226, U88-U88, (2003)
   

Zuo XB et al., Molecularly imprinted polymers for the specific rebinding of macrocyclic metal complexes via non-covalent interactions.
Abstracts of Papers of the American Chemical Society, 225, (NUCL), 26-26, (2003)
   

Zuo XB et al., Novel methodology for metal ion separation based on molecular imprinting.
Abstracts of Papers of the American Chemical Society, 227, (ENVR), 048-048, (2004)
   

Busch DH et al., Optimizing supramolecular interactions for molecularly imprinted polymers (MIPs).
Abstracts of Papers of the American Chemical Society, 229, (INOR), 491-491, (2005)
   

Zuo X et al., Toward the soil poultice and a new separations methodology: Rebinding of macrocyclic metal complexes to molecularly imprinted polymers specifically templated via noncovalent interactions.
Journal of Coordination Chemistry, 58, (1), 21-39, (2005)
   

Mosha DMS

Mosha DMS et al., Metal ion sequestration: An exciting dimension for molecularly imprinted polymer technology.
Tanzania Journal of Science, 31, (1), 91-98, (2005)
   

Philip JYN et al., Molecularly imprinted polymer technology: a powerful, generic, facile and cost effective alternative for enantio-recognition and separation: a glance at advances and applications.
Tanzania Journal of Science, 38, (3), 72-83, (2012)
   

Moshaii A

Jahangiri-Manesh A et al., Molecularly imprinted polymer-based chemiresistive sensor for detection of nonanal as a cancer related biomarker.
Microchemical Journal, 173, Article106988-(2022)
   

Moshe H

Moshe H et al., Chiral Thin Films of Metal Oxide.
Chemistry - A European Journal, 19, (31), 10295-10301, (2013)
   

Moshiri M

Yousefsani BS et al., Liquid Chromatography Analysis of Clozapine in Rat Brain Tissue, Using its Molecularly Imprinted Polymer after Administration of Toxic Dose of Drug and Lipid Emulsion Therapy.
Current Pharmaceutical Analysis, 15, (3), 251-257, (2019)
   

Moskalenko Y

Moskalenko Y et al., A ¹H NMR study of Nile Red solvation (Original Russian Text © Yu.E. Moskalenko, A.Yu. Men'shikova, N.N. Shevchenko, V.V. Faraonova, A.V. Gribanov, 2011, published in Khimiya Vysokikh Energii, 2011, Vol. 45, No. 3, pp. 214-218.).
High Energy Chemistry, 45, (3), 183-187, (2011)
   

Moskalenko YuE

Men’shikova AYu et al., Sorption of vapors of aromatic compounds by cross-linked polymer particles containing luminophores: A spectroscopic study.
Russian Journal of Applied Chemistry, 83, (11), 1997-2005, (2010)
   

Mosselmans JF

Harben SM et al., Polymer imprinting with iron-oxo-hydroxo clusters: [Fe6O2(OH)2(O2CC(Cl)=CH2)12(H2O)2], [Fe6O2(OH)2(O2C-Ph-(CH)=CH2)12(H2O)2] and [{Fe(O2CC(Cl)=CH2)(OMe)2}10].
Dalton Transactions, 41, (1), 208-218, (2012)
   

Mossing JT

Hall AJ et al., Proceeding, Molecularly imprinted polymers (MIPs) against uracils: Functional monomer design, monomer-template interactions in solution and MIP performance in chromatography, 
Shea KJ, Yan M, Roberts MJ, Cremer PS, Crooks RM, Sailor MJ (Eds.), 11-15, (2002)
   

Mosslemin MH

Nateghi MR et al., Imprinted Poly(o-phenylenediamine-co-aniline) Electrode for Warfarin Assay in Human Samples by Differential Pulse Voltammetry.
Asian Journal of Chemistry, 22, (5), 3516-3524, (2010)
   

Mostafa AM

Mostafa AM et al., Review on molecularly imprinted polymers with a focus on their application to the analysis of protein biomarkers.
TrAC Trends in Analytical Chemistry, 144, Article116431-(2021)
   

Mostafa MS

Kamel AH et al., Biomimetic ciprofloxacin sensors made of molecularly imprinted network receptors for potential measurements.
Analytical Methods, 3, (4), 957-964, (2011)
   

Mostafapour FK

Bazi M et al., Investigation of Isotherm, Kinetics and Thermodynamics of Ciprofloxacin Adsorption by Molecularly Imprinted Polymer from Aqueous Solutions.
International Journal of Pharmaceutical Investigation, 11, (3), 269-273, (2021)
   

Mostafavi A

Fayazi M et al., Preparation of molecularly imprinted polymer coated magnetic multi-walled carbon nanotubes for selective removal of dibenzothiophene.
Materials Science in Semiconductor Processing, 40, 501-507, (2015)
   

Fayazi M et al., Synthesis and application of novel ion-imprinted polymer coated magnetic multi-walled carbon nanotubes for selective solid phase extraction of lead(II) ions.
Materials Science and Engineering: C, 60, 365-373, (2016)
   

Afzali M et al., Developing a novel sensor based on ionic liquid molecularly imprinted polymer/gold nanoparticles/graphene oxide for the selective determination of an anti-cancer drug imiquimod.
Biosensors and Bioelectronics, 143, Article111620-(2019)
   

Afzali M et al., Designing a rapid and selective electrochemical nanosensor based on molecularly imprinted polymer on the Fe3O4/MoS2/glassy carbon electrode for detection of immunomodulatory drug pomalidomide.
Microchemical Journal, 164, Article106039-(2021)
   

Mostafavi M

Mostafavi M et al., A new diclofenac molecularly imprinted electrochemical sensor based upon a polyaniline/reduced graphene oxide nano-composite.
Biosensors and Bioelectronics, 122, 160-167, (2018)
   

Mostafiz B

Mostafiz B et al., Molecularly imprinted polymer-carbon paste electrode (MIP-CPE)-based sensors for the sensitive detection of organic and inorganic environmental pollutants: A review.
Trends in Environmental Analytical Chemistry, 32, Article_e00144-(2021)
   

Banan K et al., MIP-based extraction techniques for the determination of antibiotic residues in edible meat samples: Design, performance & recent developments.
Trends In Food Science & Technology, 119, 164-178, (2022)
   

Mostapa NRN

Yusoff MM et al., Synthesis of ion imprinted polymers for selective recognition and separation of rare earth metals.
Journal of Rare Earths, 35, (2), 177-186, (2017)
   

Mota MIF

Mota MIF et al., Recovery of Vanillin and Syringaldehyde from Lignin Oxidation: A Review of Separation and Purification Processes.
Separation & Purification Reviews, 45, (3), 227-259, (2016)
   

Motaharian A

Sadeghi S et al., Electroanalytical determination of sulfasalazine in pharmaceutical and biological samples using molecularly imprinted polymer modified carbon paste electrode.
Sensors and Actuators B: Chemical, 168, (1), 336-344, (2012)
   

Sadeghi S et al., Voltammetric sensor based on carbon paste electrode modified with molecular imprinted polymer for determination of sulfadiazine in milk and human serum.
Materials Science and Engineering: C, 33, (8), 4884-4891, (2013)
   

Hosseini MRM et al., Electroanalytical determination of diazepam in tablet and human serum samples using a multiwalled carbon nanotube embedded molecularly imprinted polymer-modified carbon paste electrode.
RSC Advances, 5, (99), 81650-81659, (2015)
   

Hosseini MRM et al., Fabrication of Molecularly Imprinted Polymer Coated Carbon Nanotubes Modified Gold Electrode for Determination of Cholesterol.
Analytical & Bioanalytical Electrochemistry, 7, (2), 129-148, (2015)
   

Motaharian A et al., Electrochemical sensor based on a carbon paste electrode modified by graphene nanosheets and molecularly imprinted polymer nanoparticles for determination of a chlordiazepoxide drug.
Analytical Methods, 8, (33), 6305-6312, (2016)
   

Motaharian A et al., Molecularly imprinted polymer nanoparticles-based electrochemical sensor for determination of diazinon pesticide in well water and apple fruit samples.
Analytical and Bioanalytical Chemistry, 408, (24), 6769-6779, (2016)
   

Panahi Y et al., High sensitive and selective nano-molecularly imprinted polymer based electrochemical sensor for midazolam drug detection in pharmaceutical formulation and human urine samples.
Sensors and Actuators B: Chemical, 273, 1579-1586, (2018)
   

Motaharian A et al., Determination of psychotropic drug chlorpromazine using screen printed carbon electrodes modified with novel MIP-MWCNTs nano-composite prepared by suspension polymerization method.
Sensors and Actuators B: Chemical, 288, 356-362, (2019)
   

Khosrokhavar R et al., Screen-printed carbon electrode (SPCE) modified by molecularly imprinted polymer (MIP) nanoparticles and graphene nanosheets for determination of sertraline antidepressant drug.
Microchemical Journal, 159, Article105348-(2020)
   

Motaharian A et al., Electrochemical determination of atypical antipsychotic drug quetiapine using nano-molecularly imprinted polymer modified carbon paste electrode.
Analytica Chimica Acta, 1097, 214-221, (2020)
   

Motaharian F

Motaharian A et al., Molecularly imprinted polymer nanoparticles-based electrochemical sensor for determination of diazinon pesticide in well water and apple fruit samples.
Analytical and Bioanalytical Chemistry, 408, (24), 6769-6779, (2016)
   

Motallebi A

Anvar SA et al., Detection of Salmonella typhi in aquatic environment using nano biosensor based on fluorescence.
International Journal of Biology, Pharmacy and Allied Sciences, 3, (11), 2595-2615, (2014)
   

Motallebi Moghanjoghi AA

Ahari H et al., Nanobiosensor designing with molecular framework polymer method compared with agent-linked nanosilica biosensor for Staphylococcus aureus exotoxin detection.
Iranian Journal of Fisheries Sciences, 13, (3), 667-683, (2014)
   

Motamedshariaty VS

Malaekeh-Nikouei B et al., Controlled release of prednisolone acetate from molecularly imprinted hydrogel contact lenses.
Journal of Applied Polymer Science, 126, (1), 387-394, (2012)
   

Abbasi Ghaeni F et al., Preparation of dual-template molecularly imprinted nanoparticles for organophosphate pesticides and their application as selective sorbents for water treatment.
Separation Science and Technology, 53, (16), 2517-2526, (2018)
   

Soheilifar S et al., Application of molecularly imprinted polymer in solid-phase microextraction coupled with HPLC-UV for analysis of dibutyl phthalate in bottled water and soft drink samples.
Journal of Liquid Chromatography & Related Technologies, 41, (9), 552-560, (2018)
   

Mohammadinejad A et al., Preparation, evaluation, and application of dummy molecularly imprinted polymer for analysis of hesperidin in lime juice.
Journal of Separation Science, 44, (7), 1490-1500, (2021)
   

Motghare RV

Tadi KK et al., Synthesis and Characterization of Pindolol Imprinted Polymer.
Transactions of the Indian Institute of Metals, 66, (4), 349-352, (2013)
   

Tadi KK et al., Rational synthesis of pindolol imprinted polymer by non-covalent protocol based on computational approach.
Journal of Molecular Modeling, 19, (8), 3385-3396, (2013)
   

Tadi KK et al., Computational and experimental studies on oxalic acid imprinted polymer.
Journal of Chemical Sciences, 125, (2), 413-418, (2013)
   

Tadi KK et al., Potentiometric Selective Recognition of Oxalic Acid Based on Molecularly Imprinted Polymer.
International Journal of Electrochemical Science, 8, (3), 3197-3211, (2013)
   

Tadi KK et al., Electrochemical Detection of Sulfanilamide Using Pencil Graphite Electrode Based on Molecular Imprinting Technology.
Electroanalysis, 26, (11), 2328-2336, (2014)
   

Chillawar RR et al., Voltammetric techniques at chemically modified electrodes.
Journal of Analytical Chemistry, 70, (4), 399-418, (2015)
   

Motghare RV et al., Voltammetric Determination of Uric Acid Based on Molecularly Imprinted Polymer Modified Carbon Paste Electrode.
Electroanalysis, 27, (3), 825-832, (2015)
   

Tadi KK et al., Electrochemical detection of epinephrine using a biomimic made up of hemin modified molecularly imprinted microspheres.
RSC Advances, 5, (120), 99115-99124, (2015)
   

Tadi KK et al., Voltammetric Determination of Pindolol in Biological Fluids Using Molecularly Imprinted Polymer Based Biomimetic Sensor.
Journal of The Electrochemical Society, 163, (7), B286-B292, (2016)
   

Khan SRR et al., Molecular Imprinted Polymer Based Impedimetric Sensor for Trace Level Determination of Digoxin in Biological and Pharmaceutical Samples.
Current Analytical Chemistry, 14, (5), 474-482, (2018)
   

Mothere M

Mothere M, Recognition of Specific Heparan Sulfate Oligosaccharides Involved in Tumor Development. Application of the Molecular Imprinting Technology.
Glycobiology, 21, (11), 1510-1510, (2011)
   

Motherwell WB

Motherwell WB et al., Recent progress in the design and synthesis of artificial enzymes.
Tetrahedron, 57, (22), 4663-4686, (2001)
   

Motherwell WB et al., A study of some molecularly imprinted polymers as protic catalysts for the isomerisation of a-pinene oxide to trans-carveol.
Tetrahedron, 60, (14), 3231-3241, (2004)
   

Mothibedi K

Atlabachew M et al., A (-)-norephedrine-based molecularly imprinted polymer for the solid-phase extraction of psychoactive phenylpropylamino alkaloids from Khat (Catha edulis Vahl. Endl.) chewing leaves.
Biomedical Chromatography, 30, (7), 1007-1015, (2016)
   

Mothéré M

Singabraya D et al., Molecular imprinting technology for specific recognition of heparan sulfate like disaccharides.
Talanta, 99, 833-839, (2012)
   

Mothéré M et al., Poly(ethylene glycol acrylate)-functionalized hydrogels for heparan sulfate oligosaccharide recognition.
Journal of Molecular Recognition, 30, (3), ArticleNo:e2584-(2017)
   

Motia S

Diouf A et al., Development and characterization of an electrochemical biosensor for creatinine detection in human urine based on functional molecularly imprinted polymer.
Journal of Electroanalytical Chemistry, 788, 44-53, (2017)
   

Diouf A et al., Proceeding, An electrochemical biosensor based on moleculary imprinted polymer for the quantification of creatinine in human urine samples, 
1-3, (2017)
   

Motia S et al., Development of a novel electrochemical sensor based on electropolymerized molecularly imprinted polymer for selective detection of sodium lauryl sulfate in environmental waters and cosmetic products.
Journal of Electroanalytical Chemistry, 823, 553-562, (2018)
   

Motia S et al., Electrochemical sensor based on molecularly imprinted polymer for sensitive triclosan detection in wastewater and mineral water.
Science of The Total Environment, 664, 647-658, (2019)
   

Motia S et al., Synthesis and characterization of a highly sensitive and selective electrochemical sensor based on molecularly imprinted polymer with gold nanoparticles modified screen-printed electrode for glycerol determination in wastewater.
Talanta, 216, Article120953-(2020)
   

Motia S et al., An electrochemical sensor based on molecularly imprinted polymer conjointly with a voltammetric electronic tongue for quantitative diphenyl phosphate detection in urine samples from cosmetic product users.
Sensors and Actuators B: Chemical, 332, Article129449-(2021)
   

Motia S et al., An electrochemical molecularly imprinted sensor based on chitosan capped with gold nanoparticles and its application for highly sensitive butylated hydroxyanisole analysis in foodstuff products.
Talanta, 223, Article121689-(2021)
   

Motib A

Motib A et al., Modulation of Quorum Sensing in a Gram-Positive Pathogen by Linear Molecularly Imprinted Polymers with Anti-infective Properties.
Angewandte Chemie International Edition, 56, (52), 16555-16558, (2017)
   

Motlagh MO

Nezhadali A et al., Spectrophotometric determination of fluoxetine by molecularly imprinted polypyrrole and optimization by experimental design, artificial neural network and genetic algorithm.
Spectrochimica Acta Part A-Molecular and Biomolecular Spctroscopy, 190, 181-187, (2018)
   

Moto TT

Ogawa T et al., Screening of bitterness-suppressing agents for quinine: The use of molecularly imprinted polymers.
Journal of Pharmaceutical Sciences, 94, (2), 353-362, (2005)
   

Motorina I

Crudden CM et al., Book chapter, Late Transition Metal Complexes Immobilized on Structured Surfaces as Catalysts for Hydrogenation and Oxidation Reactions, 
In: Nanostructured Catalysts, Scott SL, Crudden CM, Jones CW (Eds.) Springer US: Ch. 5, 113-155, (2003)
   

Motoya K

Yamamoto C et al., Preparation of HPLC chiral packing materials using cellulose tris(4-methylbenzoate) for the separation of chrysanthemate isomers.
Journal of Polymer Science Part A: Polymer Chemistry, 44, (17), 5087-5097, (2006)
   

Mottier P

Mohamed R et al., Advantages of Molecularly Imprinted Polymers LC-ESI-MS/MS for the Selective Extraction and Quantification of Chloramphenicol in Milk-Based Matrixes. Comparison with a Classical Sample Preparation.
Analytical Chemistry, 79, (24), 9557-9565, (2007)
   

Mohamed R et al., Use of Molecularly Imprinted Solid-Phase Extraction Sorbent for the Determination of Four 5-Nitroimidazoles and Three of Their Metabolites from Egg-Based Samples before Tandem LC-ESIMS/MS Analysis.
Journal of Agricultural and Food Chemistry, 56, (10), 3500-3508, (2008)
   

Savoy MC et al., Determination of 14 aminoglycosides by LC-MS/MS using molecularly imprinted polymer solid phase extraction for clean-up.
Food Additives & Contaminants: Part A, 35, (4), 674-685, (2018)
   

Mottram T

Velasco-Garcia MN et al., Biosensor technology addressing agricultural problems.
Biosystems Engineering, 84, (1), 1-12, (2003)
   

Mou JH

Zhang QY et al., Adsorption of TNT using beaded molecularly-imprinted polymer.
Chinese Journal of Energetic Materials, 17, (2), 249-250, (2009)
   

Mou SF

Cai YQ et al., Advances in Molecularly Imprinted Solid Phase Extraction.
Journal of Instrumental Analysis, 24, (5), 116-121, (2005)
   

Mou XL

Mou XL et al., Highly selective extraction of baicalin in natural herbs and medicinal preparations by molecularly imprinted polymer.
Journal of Applied Polymer Science, 130, (3), 1873-1878, (2013)
   

Moudrakovski IL

Lofgreen JE et al., Molecularly Imprinted Mesoporous Organosilica.
ACS Nano, 5, (3), 2277-2287, (2011)
   

Mounssef B

Couto RAS et al., Electrochemical sensing of ecstasy with electropolymerized molecularly imprinted poly(o-phenylenediamine) polymer on the surface of disposable screen-printed carbon electrodes.
Sensors and Actuators B: Chemical, 290, 378-386, (2019)
   

Couto RAS et al., Methylone screening with electropolymerized molecularly imprinted polymer on screen-printed electrodes.
Sensors and Actuators B: Chemical, 316, Article128133-(2020)
   

Grothe RA et al., Electroanalytical profiling of cocaine samples by means of an electropolymerized molecularly imprinted polymer using benzocaine as the template molecule.
Analyst, 146, (5), 1747-1759, (2021)
   

Moura C

Ferreira VRA et al., Cationic imprinting of Pb(II) within composite networks based on bovine or fish chondroitin sulfate.
Journal of Molecular Recognition, 31, (3), ArticleNoe2614-(2018)
   

Moura FA

Zink S et al., Virtually imprinted polymers (VIPs): understanding molecularly templated materials via molecular dynamics simulations.
Physical Chemistry Chemical Physics, 20, (19), 13145-13152, (2018)
   

Zink S et al., Efficient prediction of suitable functional monomers for molecular imprinting via local density of states calculations.
Physical Chemistry Chemical Physics, 20, (19), 13153-13158, (2018)
   

Santos ACF et al., Development of magnetic nanoparticles modified with new molecularly imprinted polymer (MIPs) for selective analysis of glutathione.
Sensors and Actuators B: Chemical, 344, Article130171-(2021)
   

Moura SL

Hassan AHA et al., Electrochemical sensing of methyl parathion on magnetic molecularly imprinted polymer.
Biosensors and Bioelectronics, 118, 181-187, (2018)
   

Moura SL et al., Theoretical and experimental study for the biomimetic recognition of levothyroxine hormone on magnetic molecularly imprinted polymer.
Biosensors and Bioelectronics, 107, 203-210, (2018)
   

Hassan AHA et al., Biomimetic magnetic sensor for electrochemical determination of scombrotoxin in fish.
Talanta, 194, 997-1004, (2019)
   

Mouri M

Hoshino F et al., Antibody microarray using molecular-shape imprinting on a polymer containing azo dye.
Polymer Preprints, 47, (2), 1072-1073, (2006)
   

Narita M et al., Photoinduced Immobilization of Biomolecules on the Surface of Azopolymer Films and Its Dependence on the Concentration and Type of the Azobenzene Moiety.
Macromolecules, 40, (3), 623-629, (2007)
   

Narita M et al., Aminoazopolymers with the Capability of Photoinduced Immobilization Developed for Protein Arrays with Low Photoluminescence.
Japanese Journal of Applied Physics, 47, 1329-1332, (2008)
   

Ikawa T et al., Virus-Templated Photoimprint on the Surface of an Azobenzene-Containing Polymer.
Langmuir, 26, (15), 12673-12679, (2010)
   

Mouro A

Lourenço A et al., Supercritical CO2-assisted synthesis of an ultrasensitive amphibious quantum dot-molecularly imprinted sensor.
RSC Advances, 4, (108), 63338-63341, (2014)
   

Mourão CA

Mourão CA et al., Dual-Oriented Solid-Phase Molecular Imprinting: Toward Selective Artificial Receptors for Recognition of Nucleotides in Water.
Macromolecules, 50, (19), 7484-7490, (2017)
   

Mousa AA

Alrowaili ZA et al., Green fabrication of silver imprinted titania / silica nanospheres as robust visible light-induced photocatalytic wastewater purification.
Materials Chemistry and Physics, 241, Article122403-(2020)
   

Mousavi HZ

Dahaghin Z et al., Application of magnetic ion-imprinted polymer as a new environmentally-friendly nonocomposite for a selective adsorption of the trace level of Cu(II) from aqueous solution and different samples.
Journal of Molecular Liquids, 243, 380-386, (2017)
   

Dahaghin Z et al., A novel magnetic ion imprinted polymer as a selective magnetic solid phase for separation of trace lead(II) ions from agricultural products, and optimization using a Box-Behnken design.
Food Chemistry, 237, 275-281, (2017)
   

Dahaghin Z et al., Determination of cadmium(II) using a glassy carbon electrode modified with a Cd-ion imprinted polymer.
Journal of Electroanalytical Chemistry, 810, 185-190, (2018)
   

Dahaghin Z et al., Novel ion imprinted polymer electrochemical sensor for the selective detection of lead(II).
Food Chemistry, 303, Article125374-(2020)
   

Mousavi P

Mostafiz B et al., Molecularly imprinted polymer-carbon paste electrode (MIP-CPE)-based sensors for the sensitive detection of organic and inorganic environmental pollutants: A review.
Trends in Environmental Analytical Chemistry, 32, Article_e00144-(2021)
   

Mousavi SMJ

Yousefzadeh A et al., Surface molecular imprinting and powerfully enhanced chemiluminescence emission by Cu nanoclusters/MOF composite for detection of tramadol.
Sensors and Actuators B: Chemical, 286, 154-162, (2019)
   

Mousavi-Qeydari SR

Mousavi-Qeydari SR et al., A mesoporous melamine/chitosan/activated carbon biocomposite: Preparation, characterization and its application for Ni (II) uptake via ion imprinting.
International Journal of Biological Macromolecules, 188, 126-136, (2021)
   

Mousavizadeh SH

Nezammahalleh H et al., New Potentiometric Sensor Based on Molecularly Imprinted Polymer for Dipicolinic Acid Detection in Aqueous Media.
IEEE Sensors Journal, 18, (18), 7520-7528, (2018)
   

Mousazadeh M

Jahangiri-Manesh A et al., Molecularly imprinted polymer-based chemiresistive sensor for detection of nonanal as a cancer related biomarker.
Microchemical Journal, 173, Article106988-(2022)
   

Moussa M

Moussa M et al., Potential of ion imprinted polymers synthesized by trapping approach for selective solid phase extraction of lanthanides.
Talanta, 161, 459-468, (2016)
   

Moussa M et al., Selective solid phase extraction of lanthanides from tap and river waters with ion imprinted polymers.
Analytica Chimica Acta, 963, 44-52, (2017)
   

Moustafa YM

Ali HR et al., A novel surface imprinted polymer/magnetic hydroxyapatite nanocomposite for selective dibenzothiophene scavenging.
Applied Surface Science, 426, 56-66, (2017)
   

Moutet JC

Heitzmann M et al., Complexation of poly(pyrrole-EDTA like) film modified electrodes: Application to metal cations electroanalysis.
Electrochimica Acta, 52, (9), 3082-3087, (2007)
   

Buica GO et al., Poly(pyrrole-EDTA like) modified electrodes for mercury ions electroanalysis.
Journal of Optoelectronics and Advanced Materials, 11, (8), 1152-1159, (2009)
   

Pereira E et al., Complexing Polymer Films in The Preparation of Modified Electrodes for Detection of Metal Ions.
Macromolecular Symposia, 304, (1), 115-125, (2011)
   

Moutet JM

Buica GO et al., Voltammetric Sensing of Mercury and Copper Cations at Poly(EDTA-like) Film Modified Electrode.
Electroanalysis, 21, (1), 77-86, (2009)
   

Mouvet C

Amalric L et al., Molecularly imprinted polymer applied to the determination of the residual mass of atrazine and metabolites within an agricultural catchment (Brevilles, France).
Journal of Chromatography A, 1206, (2), 95-104, (2008)
   

Movahed Z

Alizadeh T et al., Indirectly Determination of Urea Using Chloride Ion Selective Electrode after its Extraction and Preconcentration by Molecularly Imprinted Polymer.
Analytical & Bioanalytical Electrochemistry, 1, (4), 246-256, (2009)
   

Movig K

Abbas Y et al., Molecularly Imprinted Polymer-carbon Nanotube based Cotinine Sensor.
Procedia Engineering, 168, 497-500, (2016)
   

Mowla SJ

Hashemi-Moghaddam H et al., Separation of microRNA 21 as a cancer marker from glioblastoma cell line using molecularly imprinted polymer coated on silica nanoparticles.
Journal of Separation Science, 39, (18), 3564-3570, (2016)
   

Mozhaev VV

Rich JO et al., Molecular imprinting of enzymes with water-insoluble ligands for nonaqueous biocatalysis.
Journal of the American Chemical Society, 124, (19), 5254-5255, (2002)
   

Mpayipheli N

Mpayipheli N et al., Vortex-Assisted Dispersive Molecularly Imprinted Polymer-Based Solid Phase Extraction of Acetaminophen from Water Samples Prior to HPLC-DAD Determination.
Separations, 8, (10), ArticleNo194-(2021)
   

Mpupa A

Mpayipheli N et al., Vortex-Assisted Dispersive Molecularly Imprinted Polymer-Based Solid Phase Extraction of Acetaminophen from Water Samples Prior to HPLC-DAD Determination.
Separations, 8, (10), ArticleNo194-(2021)
   

Mpupa A et al., Recent Advances in Solid-Phase Extraction (SPE) Based on Molecularly Imprinted Polymers (MIPs) for Analysis of Hormones.
Chemosensors, 9, (7), ArticleNo151-(2021)
   

Mrkvová K

Sharma N et al., Molecularly Imprinted Polymer Waveguides for Direct Optical Detection of Low-Molecular-Weight Analytes.
Macromolecular Chemistry And Physics, 215, (23), 2295-2304, (2014)
   

Mroginski MA

Altintas Z et al., Integrated Approaches Toward High-Affinity Artificial Protein Binders Obtained via Computationally Simulated Epitopes for Protein Recognition.
Advanced Functional Materials, 29, (15), Article1807332-(2019)
   

Mrowiec H

Walas S et al., Application of a metal ion-imprinted polymer based on salen-Cu complex to flow injection preconcentration and FAAS determination of copper.
Talanta, 76, (1), 96-101, (2008)
   

Tobiasz A et al., Cu(II)-imprinted styrene-divinylbenzene beads as a new sorbent for flow injection-flame atomic absorption determination of copper.
Microchemical Journal, 93, (1), 87-92, (2009)
   

Gawin M et al., Preparation of a new Cd(II)-imprinted polymer and its application to determination of cadmium(II) via flow-injection-flame atomic absorption spectrometry.
Talanta, 80, (3), 1305-1310, (2010)
   

Msaadi R

Msaadi R et al., Diazonium-based ion-imprinted polymer/clay nanocomposite for the selective extraction of lead (II) ions in aqueous media.
European Polymer Journal, 89, 367-380, (2017)
   

Msaadi R et al., Highly Selective Copper Ion Imprinted Clay/Polymer Nanocomposites Prepared by Visible Light Initiated Radical Photopolymerization.
Polymers, 11, (2), ArticleNo286-(2019)
   

Msagati TAM

Mafu LD et al., Ion-imprinted polymers for environmental monitoring of inorganic pollutants: synthesis, characterization, and applications.
Environmental Science and Pollution Research, 20, (2), 790-802, (2013)
   

Mbukwa EA et al., Preparation of guanidinium terminus-molecularly imprinted polymers for selective recognition and solid-phase extraction (SPE) of [arginine]-microcystins.
Analytical and Bioanalytical Chemistry, 405, (12), 4253-4267, (2013)
   

Kibechu RW et al., Synthesis and application of reduced graphene oxide and molecularly imprinted polymers composite in chemo sensor for trichloroacetic acid detection in aqueous solution.
Physics and Chemistry of the Earth, Parts A/B/C, 76-78, 49-53, (2014)
   

Mamba BB et al., Book chapter, Advances in Nanostructured Polymers and Membranes for Removal of Heavy Metals in Water, 
In: Aquananotechnology: Global Prospects, Reisner DE, Pradeep T (Eds.) CRC Press: Boca Raton, Ch. 20, 399-418, (2014)
   

Sikiti P et al., Synthesis and characterization of molecularly imprinted polymers for the remediation of PCBs and dioxins in aqueous environments.
Journal of Environmental Health Science and Engineering, 12, (1), Article No 82-(2014)
   

Mafu LD et al., Synthesis and characterization of ion imprinted polymeric adsorbents for the selective recognition and removal of arsenic and selenium in wastewater samples.
Journal of Saudi Chemical Society, 20, (5), 594-605, (2016)
   

Kibechu R et al., Effect of incorporating graphene oxide and surface imprinting on polysulfone membranes on flux, hydrophilicity and rejection of salt and polycyclic aromatic hydrocarbons from water.
Physics and Chemistry of the Earth, Parts A/B/C, 100, 126-134, (2017)
   

Kibechu RW et al., Graphene-based molecularly imprinted polymer for separation and pre-concentration of trace polycyclic aromatic hydrocarbons in environmental water samples.
Journal of Applied Polymer Science, 134, (37), ArticleNo45300-(2017)
   

Mkhize DS et al., Molecularly imprinted membranes (MIMs) for selective removal of polychlorinated biphenyls (PCBs) in environmental waters: fabrication and characterization.
Environmental Science and Pollution Research, 24, (12), 11694-11707, (2017)
   

Mkhize DS et al., Calibration and field application of a molecularly imprinted membrane-passive sampler for the sampling of indicator polychlorinated biphenyls in selected aquatic environments of South Africa.
Water Science And Technology, 79, (5), 808-819, (2019)
   

Mtolo SP

Mtolo SP et al., Synthesis and application of a molecularly imprinted polymer in selective solid-phase extraction of efavirenz from water.
Water Science And Technology, 79, (2), 356-365, (2019)
   

Mtyata T

Mtyata T et al., Controlled structures and responsiveness of stimuli-responsive gels that undergo volume changes in response to biomolecules.
Polymer Preprints, Japan, 55, (2), 4516-4517, (2006)
   

Mu CH

Li PF et al., Selective adsorption of tetrahydropalmatine by a molecularly imprinted polymer with modified rosin cross-linker.
South African Journal of Chemistry, 67, (1), 67-70, (2014)
   

Mu GD

Tian HJ et al., Rapid and sensitive determination of trace fluoroquinolone antibiotics in milk by molecularly imprinted polymer-coated stainless steel sheet electrospray ionization mass spectrometry.
Talanta, 219, Article121282-(2020)
   

Mu H

Du JJ et al., Selective extraction of dimethoate from cucumber samples by use of molecularly imprinted microspheres.
Journal of Pharmaceutical Analysis, 5, (3), 200-206, (2015)
   

Du JJ et al., A Novel Molecularly Imprinted Polymer Based on Carbon Nanotubes for Selective Determination of Dioctyl Phthalate from Beverage Samples Coupled with GC/MS.
Food Analytical Methods, 9, (7), 2026-2035, (2016)
   

Mu HK

Li Z et al., Preparation of a novel ion-imprinted membrane using sodium periodate-oxidized polydopamine as the interface adhesion layer for the direction separation of Li+ from spent lithium-ion battery leaching solution.
Separation and Purification Technology, 277, Article119519-(2021)
   

Mu HL

Liu CP et al., Study on the adsorption property of copper (II) imprinted chelating resin for metal ions.
Ion Exchange and Adsorption, 19, (6), 504-510, (2003)
   

Mu HY

Mu HY et al., Progress in template-ion imprinted polymer.
Chemical Industry and Engineering Progress, 30, (11), 2467-2480, (2011)
   

Mu HY et al., Preparation of an Ion Imprinted Fluorescent Sensor for Selectivity Determination of Cadmium in Aqueous Media.
Journal of Instrumental Analysis, 30, (7), 795-798, (2011)
   

Mu L

Liu HL et al., Application of Quantum Dot-Molecularly Imprinted Polymer Core-Shell Particles Sensitized with Graphene for Optosensing of N[epsilon]-Carboxymethyllysine in Dairy Products.
Journal of Agricultural and Food Chemistry, 64, (23), 4801-4806, (2016)
   

Liu HL et al., Optical Determination of Cholesterol in Milk with Molecularly Imprinted Polymer-Coated Quantum Dots.
Analytical Letters, 50, (12), 1964-1976, (2017)
   

Liu HL et al., Core-Shell Metal-Organic Frameworks/Molecularly Imprinted Nanoparticles as Absorbents for the Detection of Pyrraline in Milk and Milk Powder.
Journal of Agricultural and Food Chemistry, 65, (4), 986-992, (2017)
   

Liu HL et al., Sensitive detection of pyrraline with a molecularly imprinted sensor based on metal-organic frameworks and quantum dots.
Sensors and Actuators B: Chemical, 256, 1038-1044, (2018)
   

Mu LL

Peng J et al., New techniques of on-line biological sample processing and their application in the field of biopharmaceutical analysis.
Acta Pharmaceutica Sinica B, 6, (6), 540-551, (2016)
   

Mu LN

Mu LN et al., Low cross-linked molecularly imprinted monolithic column prepared in molecular crowding conditions.
Journal of Chromatography A, 1218, (51), 9236-9243, (2011)
   

Wei ZH et al., Preparation and characterization of grafted imprinted monolith for capillary electrochromatography.
Electrophoresis, 33, (19-20), 3021-3027, (2012)
   

Wei ZH et al., Low crosslinking imprinted coatings based on liquid crystal for capillary electrochromatography.
Journal of Chromatography A, 1237, (1), 115-121, (2012)
   

Mu LN et al., Current trends in the development of molecularly imprinted polymers in CEC.
Electrophoresis, 36, (5), 764-772, (2015)
   

Wei ZH et al., Imprinted monoliths: Recent significant progress in analysis field.
TrAC Trends in Analytical Chemistry, 86, 84-92, (2017)
   

Wei ZH et al., Improving affinity of imprinted monolithic polymer prepared in deep eutectic solvent by metallic pivot.
Journal of Chromatography A, 1602, 48-55, (2019)
   

Mu N

Pan Y et al., A SAW-Based Chemical Sensor for Detecting Sulfur-Containing Organophosphorus Compounds Using a Two-Step Self-Assembly and Molecular Imprinting Technology.
Sensors, 14, (5), 8810-8820, (2014)
   

Pan Y et al., Selective Surface Acoustic Wave-Based Organophosphorus Sensor Employing a Host-Guest Self-Assembly Monolayer of [beta]-Cyclodextrin Derivative.
Sensors, 15, (8), 17916-17925, (2015)
   

Mu S

Zhao ZW et al., Preparation and characteristics of a molecularly imprinted electrode for dioxopromethazine hydrochloride.
Chinese Journal of Analysis Laboratory, 34, (2), 178-181, (2015)
   

Zhang YD et al., Molecularly imprinted gelatin nanoparticles for DNA delivery and in-situ fluorescence imaging of telomerase activity.
Microchimica Acta, 186, (9), Article610-(2019)
   

Mu XG

Chen W et al., Molecularly imprinted hollow spheres for the solid phase extraction of estrogens.
Talanta, 140, 68-72, (2015)
   

Mu XR

Gao RX et al., Combination of surface imprinting and immobilized template techniques for preparation of core-shell molecularly imprinted polymers based on directly amino-modified Fe3O4 nanoparticles for specific recognition of bovine hemoglobin.
Journal of Materials Chemistry B, 2, (12), 1733-1741, (2014)
   

Gao RX et al., Specific recognition of bovine serum albumin using superparamagnetic molecularly imprinted nanomaterials prepared by two-stage core-shell sol-gel polymerization.
Journal of Materials Chemistry B, 2, (7), 783-792, (2014)
   

Mu XT

Liu YQ et al., A novel chemosensor for sensitive and facile detection of strontium ions based on ion-imprinted hydrogels modified with guanosine derivatives.
Journal of Hazardous Materials, 421, Article126801-(2022)
   

Mu Y

Luo GM et al., Towards more efficient glutathione peroxidase mimics: Substrate recognition and catalytic group assembly.
Current Medicinal Chemistry, 10, (13), 1151-1183, (2003)
   

Shen N et al., Imprinted Human Serum Albumin with Antioxidant Activity.
Chemical Research in Chinese Universities, 27, (2), 258-263, (2011)
   

Ji WH et al., Selective solid phase extraction of chloroacetamide herbicides from environmental water samples by amphiphilic magnetic molecularly imprinted polymers.
Talanta, 170, 111-118, (2017)
   

Ji WH et al., Selective extraction and determination of chlorogenic acids as combined quality markers in herbal medicines using molecularly imprinted polymers based on a mimic template.
Analytical and Bioanalytical Chemistry, 409, (30), 7087-7096, (2017)
   

Ji WH et al., Superhydrophilic molecularly imprinted polymers based on a single cross-linking monomer for the recognition of iridoid glycosides in Di-huang pills.
Analytical and Bioanalytical Chemistry, 410, (25), 6539-6548, (2018)
   

Mu ZD

Wang X et al., Molecular imprinted photonic crystal hydrogels for the rapid and label-free detection of imidacloprid.
Food Chemistry, 141, (4), 3947-3953, (2013)
   

Muchuan N

Fizir M et al., QbD approach by computer aided design and response surface methodology for molecularly imprinted polymer based on magnetic halloysite nanotubes for extraction of norfloxacin from real samples.
Talanta, 184, 266-276, (2018)
   

Mudd S

Mudd S, A hypothetical mechanism of antibody formation.
Journal of Immunology, 23, (6), 423-427, (1932)
   

Mudiam MKR

Mudiam MKR et al., Determination of t, t-muconic acid in urine samples using a molecular imprinted polymer combined with simultaneous ethyl chloroformate derivatization and pre-concentration by dispersive liquid-liquid microextraction.
Analytical and Bioanalytical Chemistry, 405, (1), 341-349, (2013)
   

Mudiam MKR et al., Molecularly imprinted SPE combined with dispersive liquid-liquid microextraction for selective analysis of telmisartan in biological and formulation samples.
Bioanalysis, 5, (7), 847-858, (2013)
   

Mudiam MKR et al., Molecularly imprinted polymer coupled with dispersive liquid-liquid microextraction and injector port silylation: A novel approach for the determination of 3-phenoxybenzoic acid in complex biological samples using gas chromatography-tandem mass spectrometry.
Journal of Chromatography B, 945-946, 23-30, (2014)
   

Chauhan A et al., Application of nano-sized multi-template imprinted polymer for simultaneous extraction of polycyclic aromatic hydrocarbon metabolites in urine samples followed by ultra-high performance liquid chromatographic analysis.
Journal of Chromatography B, 985, 110-118, (2015)
   

Chauhan A et al., Imprinted nanospheres based on precipitation polymerization for the simultaneous extraction of six urinary benzene metabolites from urine followed by injector port silylation and gas chromatography-tandem mass spectrometric analysis.
Journal of Chromatography B, 1001, 66-74, (2015)
   

Pandey V et al., Optical sensing of 3-phenoxybenzoic acid as a pyrethroid pesticides exposure marker by surface imprinting polymer capped on manganese-doped zinc sulfide quantum dots.
Analytical Chemistry Research, 5, 21-27, (2015)
   

Bhatia T et al., Sol-gel approach for extracting highly versatile aspirin and its metabolites using MISPE followed by GC-MS/MS analysis.
Bioanalysis, 8, (8), 795-805, (2016)
   

Khan S et al., Selective solid-phase extraction using molecularly imprinted polymer as a sorbent for the analysis of fenarimol in food samples.
Food Chemistry, 199, 870-875, (2016)
   

Mueller A

Eastman C et al., Imprinted polymers in wastewater treatment.
Abstracts of Papers of the American Chemical Society, 227, (ENVR), 049-049, (2004)
   

Randhawa M et al., Imprinted polymers for water purification.
Journal of Applied Polymer Science, 106, (5), 3321-3326, (2007)
   

Ashraf SA et al., Imprinted polymers for the removal of hydrophilic metal complexes from water.
Abstracts of Papers of the American Chemical Society, 235, (ENVR), 20-(2008)
   

Mercado C et al., Imprinted polymers for the removal of hydrophobic compounds from wastewater.
Abstracts of Papers of the American Chemical Society, 235, (ENVR), 18-(2008)
   

Ashraf SA et al., Book chapter, Imprinted Polymers for the Removal of Hydrophilic and Hydrophobic Metal Complexes, 
In: New Membranes and Advanced Materials for Wastewater Treatment, Mueller A, Guieysse B, Sarkar A (Eds.) American Chemical Society: Washington DC, Ch. 4, 53-70, (2009)
   

Ashraf S et al., Imprinted polymers for the removal of heavy metal ions from water.
Water Science And Technology, 64, (6), 1325-1332, (2011)
   

Tomasik JH et al., Development and Preliminary Impacts of the Implementation of an Authentic Research-Based Experiment in General Chemistry.
Journal of Chemical Education, 90, (9), 1155-1161, (2013)
   

Appell M et al., Analysis of fusaric acid in maize using molecularly imprinted solid phase extraction (MISPE) clean-up and ion-pair LC with diode array UV detection.
Abstracts of Papers of the American Chemical Society, 247, (AGFD), 138-(2014)
   

Appell M et al., Determination of fusaric acid in maize using molecularly imprinted SPE clean-up.
Journal of Separation Science, 37, (3), 281-286, (2014)
   

Appell M et al., Mycotoxin Analysis Using Imprinted Materials Technology: Recent Developments.
Journal of AOAC International, 99, (4), 861-864, (2016)
   

Perera R et al., The binding of metal ions to molecularly-imprinted polymers.
Water Science And Technology, 75, (7), 1643-1650, (2017)
   

Mann S et al., Pressure-Stable Imprinted Polymers for Waste Water Remediation.
Polymers, 10, (7), ArticleNo704-(2018)
   

Mueller A, A Note about Crosslinking Density in Imprinting Polymerization.
Molecules, 26, (17), ArticleNo5139-(2021)
   

Mueller S

Wang YT et al., Potentiometric sensors based on surface molecular imprinting: Detection of cancer biomarkers and viruses.
Sensors and Actuators B: Chemical, 146, (1), 381-387, (2010)
   

Ricotta V et al., A chip-based potentiometric sensor for a Zika virus diagnostic using 3D surface molecular imprinting.
Analyst, 144, (14), 4266-4280, (2019)
   

Mufeedha P

Sabu C et al., Bioinspired oral insulin delivery system using yeast microcapsules.
Materials Science and Engineering: C, 103, Article109753-(2019)
   

Mufti N

Setiyanto H et al., The Performance of Molecularly Imprinted Polymers (MIPs)-Modified Carbon Paste Electrode and Its Application in Detecting Phenol.
International Journal of Electrochemical Science, 15, 5477-5486, (2020)
   

Mugo MS

Zhang Q et al., Stimuli Responsive Polymer-Based 3D Optical Crystals for Sensing.
Polymers, 9, (11), ArticleNo436-(2017)
   

Mugo SM

Mugo SM et al., An integrated carbon entrapped molecularly imprinted polymer (MIP) electrode for voltammetric detection of resveratrol in wine.
Analytical Methods, 7, (21), 9092-9099, (2015)
   

Dhanjai et al., A flexible-imprinted capacitive sensor for rapid detection of adrenaline.
Talanta, 204, 602-606, (2019)
   

Zhang Q et al., Molecularly imprinted carbon based electrodes for tetrahydrocannabinol sensing.
Inorganic Chemistry Communications, 107, Article107459-(2019)
   

Mugo SM et al., Flexible molecularly imprinted electrochemical sensor for cortisol monitoring in sweat.
Analytical and Bioanalytical Chemistry, 412, (8), 1825-1833, (2020)
   

Muguruma H

Kugimiya A et al., Recognition of sialic-acid using molecularly imprinted polymer.
Analytical Letters, 28, (13), 2317-2323, (1995)
   

Nomura Y et al., Selective recognition of 2, 4-dichlorophenoxyacetic acid using a molecularly imprinted polymer.
Analytical Letters, 31, (6), 973-980, (1998)
   

Dela Cruz EO et al., Molecular imprinting of methyl pyrazines.
Analytical Letters, 32, (5), 841-854, (1999)
   

Orihara K et al., Heparin molecularly imprinted polymer thin flm on gold electrode by plasma-induced graft polymerization for label-free biosensor.
Journal of Pharmaceutical and Biomedical Analysis, 151, 324-330, (2018)
   

Muhamad II

Rahman MRA et al., Characterization of Bacterial Cellulose-Chitosan Composite Membrane Grafted With Theophylline-Imprinted Copolymer.
Applied Polymer Composites, 1, (3), 167-186, (2013)
   

Muhamad M

Husin NA et al., Application of a new choline-imidazole based deep eutectic solvents in hybrid magnetic molecularly imprinted polymer for efficient and selective removal of naproxen from aqueous samples.
Materials Chemistry and Physics, 261, Article124228-(2021)
   

Muhammad F

Shah SM et al., Highly Selective Solid-Phase Extraction of Pb(II) by Ion-Imprinted Superparamagnetic Mesoporous Silica.
ChemistrySelect, 4, (1), 259-264, (2019)
   

Muhammad I

Yigaimu A et al., Magnetic Molecularly Imprinted Polymer Particles Based Micro-Solid Phase Extraction for the Determination of 4-Nitrophenol in Lake Water.
Macromolecular Research, 27, (11), 1089-1094, (2019)
   

Farooq S et al., Application, advancement and green aspects of magnetic molecularly imprinted polymers in pesticide residue detection.
Science of The Total Environment, 804, Article150293-(2022)
   

Muhammad K

Muhammad K et al., Screening the Best Functional Monomer for Preparation of Molecularly Imprinted Polymer of 4-Nitrophenol and Application on Solid Phase Extraction of Water Sample.
Chinese Journal of Applied Chemistry, 31, (4), 482-488, (2014)
   

Muhammad T et al., On-line determination of 4-nitrophenol by combining molecularly imprinted solid-phase extraction and fiber-optic spectrophotometry.
Journal of Separation Science, 37, (14), 1873-1879, (2014)
   

Yang WW et al., Preparation of stoichiometric molecularly imprinted polymer coatings on magnetic particles for the selective extraction of auramine O from water.
Journal of Separation Science, 41, (22), 4185-4193, (2018)
   

Muhammad M

Ara B et al., Synthesis of Ion Imprinted Polymers by Copolymerization of Zn(II) and Al(III)8-hydroxy Quinolone Complexes with Divinylbenzene and Methacryclic Acid.
Polymer-Plastics Technology and Engineering, 55, (14), 1460-1473, (2016)
   

Ara B et al., Preparation of microspheric Fe(III)-ion imprinted polymer for selective solid phase extraction.
Applied Water Science, 8, (1), ArticleNo41-(2018)
   

Ahmad R et al., Book chapter, Molecularly Imprinted Polymeric Nanomaterials for Environmental Analysis, 
In: Environmental Chemistry for a Sustainable World, Dasgupta N, Ranjan S, Lichtfouse E (Eds.) Springer: Cham, 143-168, (2019)
   

Behisht A et al., Preconcentration of Nickel from Aqueous Environment Using Microspheric Nickel(II) Ion Imprinted Polymer.
Journal of Water Chemistry and Technology, 43, (5), 379-386, (2021)
   

Muhammad P

Tu XY et al., Molecularly Imprinted Polymer-Based Plasmonic Immunosandwich Assay for Fast and Ultrasensitive Determination of Trace Glycoproteins in Complex Samples.
Analytical Chemistry, 88, (24), 12363-12370, (2016)
   

Muhammad P et al., Fast probing of glucose and fructose in plant tissues via plasmonic affinity sandwich assay with molecularly-imprinted extraction microprobes.
Analytica Chimica Acta, 995, 34-42, (2017)
   

Muhammad P et al., Molecularly Imprinted Plasmonic Substrates for Specific and Ultrasensitive Immunoassay of Trace Glycoproteins in Biological Samples.
ACS Applied Materials & Interfaces, 9, (13), 12082-12091, (2017)
   

He H et al., Controllably prepared molecularly imprinted core-shell plasmonic nanostructure for plasmon-enhanced fluorescence assay.
Biosensors and Bioelectronics, 146, Article111733-(2019)
   

Muhammad T

Muhammad T et al., Preparation of molecular imprinted polymer fluorescence sensing membrane and its application to the determination of amiodarone.
Chinese Journal of Analytical Chemistry, 35, (7), 1059-1062, (2007)
   

Liu C et al., Synthesis of Lidocaine Molecularly Imprinted Polymers and Application on Solid Phase Extraction.
Chinese Journal of Analytical Chemistry, 38, (11), 1652-1656, (2010)
   

Zeng HH et al., Study of zidovudine molecularly imprinted polymers applied to solid phase extraction.
Chinese Journal of Pharmaceutical Analysis, 30, (4), 686-690, (2010)
   

Muhammad T et al., Dummy-template Molecularly Imprinted Polymer for Selective Solid Phase Extraction of Metronidazole in Bovine Serum.
Chinese Journal of Analytical Chemistry, 39, (12), 1841-1845, (2011)
   

Muhammad T et al., Rational design and synthesis of water-compatible molecularly imprinted polymers for selective solid phase extraction of amiodarone.
Analytica Chimica Acta, 709, (1), 98-104, (2012)
   

Muhammad T et al., Rational design of molecularly imprinted polymer: the choice of cross-linker.
Analyst, 137, (11), 2623-2628, (2012)
   

Muhammad K et al., Screening the Best Functional Monomer for Preparation of Molecularly Imprinted Polymer of 4-Nitrophenol and Application on Solid Phase Extraction of Water Sample.
Chinese Journal of Applied Chemistry, 31, (4), 482-488, (2014)
   

Muhammad T et al., On-line determination of 4-nitrophenol by combining molecularly imprinted solid-phase extraction and fiber-optic spectrophotometry.
Journal of Separation Science, 37, (14), 1873-1879, (2014)
   

Chang JH et al., A Simple and Selective Fluorescent Sensor Chip for Indole-3-Butyric Acid in Mung Bean Sprouts Based on Molecularly Imprinted Polymer Coatings.
Sensors, 17, (9), ArticleNo1954-(2017)
   

Chen L et al., New immobilisation protocol for the template used in solid-phase synthesis of MIP nanoparticles.
Applied Surface Science, 406, 115-121, (2017)
   

Yang WW et al., Preparation of stoichiometric molecularly imprinted polymer coatings on magnetic particles for the selective extraction of auramine O from water.
Journal of Separation Science, 41, (22), 4185-4193, (2018)
   

Aihebaier S et al., Membrane-Protected Molecularly Imprinted Polymer for the Microextraction of Indole-3-butyric Acid in Mung Bean Sprouts.
ACS Omega, 4, (16), 16789-16793, (2019)
   

Pataer P et al., Preparation of a stoichiometric molecularly imprinted polymer for auramine O and application in solid-phase extraction.
Journal of Separation Science, 42, (8), 1634-1643, (2019)
   

Wubulikasimu M et al., Synthesis of fluorescent drug molecules for competitive binding assay based on molecularly imprinted polymers.
RSC Advances, 9, (12), 6779-6784, (2019)
   

Yigaimu A et al., Magnetic Molecularly Imprinted Polymer Particles Based Micro-Solid Phase Extraction for the Determination of 4-Nitrophenol in Lake Water.
Macromolecular Research, 27, (11), 1089-1094, (2019)
   

Hu YT et al., A simple on-line detection system based on fiber-optic sensing for the realtime monitoring of fixed bed adsorption processes of molecularly imprinted polymers.
Journal of Chromatography A, 1622, Article461112-(2020)
   

Wu BB et al., A molecularly imprinted polymer based monolith pipette tip for solid-phase extraction of 2, 4-dichlorophenoxyacetic acid in an aqueous sample.
Analytical Methods, 12, (40), 4913-4921, (2020)
   

Muhammed M

Molochnikov LS et al., Coordination of Cu(II) and Ni(II) in polymers imprinted so as to optimize amine chelate formation.
Polymer, 44, (17), 4805-4815, (2003)
   

Muir A

Wickham JM et al., Electrodes with imprinted polymer membranes.
Abstracts of Papers of the American Chemical Society, 223, (ANYL), 074-074, (2002)
   

Mujahid A

Lieberzeit PA et al., Proceeding, Acoustic chemosensors for real-life environments, 
431-433, (2008)
   

Mujahid A et al., Imprinted sol-gel materials for monitoring degradation products in automotive oils by shear transverse wave.
Analytica Chimica Acta, 675, (1), 53-57, (2010)
   

Mujahid A et al., Solvent Vapour Detection with Cholesteric Liquid Crystals-Optical and Mass-Sensitive Evaluation of the Sensor Mechanism.
Sensors, 10, (5), 4887-4897, (2010)
   

Mujahid A et al., Chemical Sensors Based on Molecularly Imprinted Sol-Gel Materials.
Materials, 3, (4), 2196-2217, (2010)
   

Latif U et al., Dual and tetraelectrode QCMs using imprinted polymers as receptors for ions and neutral analytes.
Analytical and Bioanalytical Chemistry, 400, (8), 2507-2515, (2011)
   

Mujahid A et al., Monitoring automotive oil degradation: analytical tools and onboard sensing technologies.
Analytical and Bioanalytical Chemistry, 404, (4), 1197-1209, (2012)
   

Mujahid A et al., Book chapter, Molecularly Imprinted Polymers for Sensors: Comparison of Optical and Mass-Sensitive Detection, 
In: Molecularly Imprinted Sensors, Li SJ, Ge Y, Piletsky SA, Lunec J (Eds.) Elsevier: Amsterdam, Ch. 6, 125-159, (2012)
   

Afzal A et al., Advanced vapor recognition materials for selective and fast responsive surface acoustic wave sensors: A review.
Analytica Chimica Acta, 787, 36-49, (2013)
   

Irshad M et al., Molecularly Imprinted Nanomaterials for Sensor Applications.
Nanomaterials, 3, (4), 615-637, (2013)
   

Mujahid A et al., Bioimprinting strategies: From soft lithography to biomimetic sensors and beyond.
Biotechnology Advances, 31, (8), 1435-1447, (2013)
   

Mujahid A et al., Book chapter, Molecular Imprinted Polymers for Biomedical Applications, 
In: Supramolecular Systems in Biomedical Fields, Schneider HJ (Ed.) Royal Society of Chemistry: Cambridge, UK, Ch. 14, 419-450, (2013)
   

Mujahid A et al., Book chapter, Detection of Cells and Viruses Using Synthetic Antibodies, 
In: Handbook of Molecular Imprinting - Advanced Sensor Applications, Lee SW, Kunitake T (Eds.) Pan Stanford Publishing Pte. Ltd.: Singapore, Ch. 16, 527-568, (2013)
   

Hussain T et al., Molecular Imprinted Titania Sol-Gel Layer for Conductometric Sensing of p-Nitrophenol.
Sensor Letters, 12, (11), 1682-1687, (2014)
   

Iqbal N et al., Layer-by-layer assembly of low-temperature-imprinted poly(methacrylic acid)/gold nanoparticle hybrids for gaseous formaldehyde mass sensing.
RSC Advances, 4, (81), 43121-43130, (2014)
   

Haq I et al., Developing imprinted polymer nanoparticles for the selective separation of antidiabetic drugs.
Journal of Separation Science, 38, (19), 3469-3476, (2015)
   

Iqbal N et al., Book chapter, Molecularly Imprinted Polymers (MIPs): Virus Sensing Applications, 
In: Encyclopedia of Biomedical Polymers and Polymeric Biomaterials, Taylor & Francis: 4856-4866, (2015)
   

Khan MN et al., Molecular Imprinted Polysiloxanes for Selective Removal of Leucomalachite Green.
Asian Journal of Chemistry, 27, (12), 4369-4372, (2015)
   

Khan MN et al., Molecular Imprinted Polysiloxanes for Selective Removal of Leucomalachite Green.
Asian Journal of Chemistry, 27, (12), 4369-4372, (2015)
   

Mujahid A et al., Tailoring Imprinted Titania Nanoparticles for Purines Recognition.
Journal of Materials, 2015, ArticleNo903543-(2015)
   

Mujahid A et al., Molecularly imprinted titania nanoparticles for selective recognition and assay of uric acid.
Applied Nanoscience, 5, (5), 527-534, (2015)
   

Afzal A et al., A collaborative effect of imprinted polymers and Au nanoparticles on bioanalogous detection of organic vapors.
Sensors and Actuators B: Chemical, 231, 431-439, (2016)
   

Mujahid A et al., Book chapter, Molecularly Imprinted Polymers: Principle, Design, and Enzyme-Like Catalysis, 
In: Molecularly Imprinted Catalysts: Principles, Syntheses and Applications, Li SJ, Cao SS, Piletsky SA, Turner APF (Eds.) Elsevier: Amsterdam, Ch. 5, 79-101, (2016)
   

Mujahid A et al., Blood Group Typing: From Classical Strategies to the Application of Synthetic Antibodies Generated by Molecular Imprinting.
Sensors, 16, (1), ArticleNo51-(2016)
   

Younis MR et al., Molecularly imprinted porous beads for the selective removal of copper ions.
Journal of Separation Science, 39, (4), 793-798, (2016)
   

Afzal A et al., Gravimetric Viral Diagnostics: QCM Based Biosensors for Early Detection of Viruses.
Chemosensors, 5, (1), ArticleNo7-(2017)
   

Mujahid A et al., Surface Acoustic Wave (SAW) for Chemical Sensing Applications of Recognition Layers.
Sensors, 17, (12), ArticleNo2716-(2017)
   

Mujahid A et al., Micro-structured interdigital capacitors with synthetic antibody receptors for ABO blood-group typing.
Sensors and Actuators B: Chemical, 242, 378-383, (2017)
   

Mujahid A et al., Label-Free Bioanalyte Detection from Nanometer to Micrometer Dimensions-Molecular Imprinting and QCMs.
Biosensors, 8, (2), ArticleNo52-(2018)
   

Roshan S et al., Molecularly Imprinted Polymer-Silica Hybrid Particles for Biomimetic Recognition of Target Drugs.
Advances in Polymer Technology, 2019, Article9432412-(2019)
   

Arshad U et al., Molecularly imprinted polymeric coatings for sensitive and selective gravimetric detection of artemether.
RSC Advances, 10, (57), 34355-34363, (2020)
   

Garcia Cruz A et al., Design and fabrication of a smart sensor using in silico epitope mapping and electro-responsive imprinted polymer nanoparticles for determination of insulin levels in human plasma.
Biosensors and Bioelectronics, 169, Article112536-(2020)
   

Mujahid A et al., Molecularly imprinted poly(methyl methacrylate)-nickel sulfide hybrid membranes for adsorptive desulfurization of dibenzothiophene.
Separation and Purification Technology, 237, Article116453-(2020)
   

Mukai S

Kubo T et al., Magnetic Field Stimuli-Sensitive Drug Release Using a Magnetic Thermal Seed Coated with Thermal-Responsive Molecularly Imprinted Polymer.
ACS Biomaterials Science & Engineering, 5, (2), 759-767, (2019)
   

Mukami HW

Mukami HW et al., Application of a Custom-Synthesized Molecularly Imprinted Polymer for the Selective Isolation of Total Glucose and Fructose from 100% Fruit Juice Samples Prior to Instrumental Analysis.
Molecular Imprinting, 5, (1), ArticleNo16-(2018)
   

Mukawa T

Kugimiya A et al., Synthesis of 5-fluorouracil-imprinted polymers with multiple hydrogen bonding interactions.
Analyst, 126, (6), 772-774, (2001)
   

Takeuchi T et al., Molecularly imprinted polymers with metalloporphyrin-based molecular recognition sites coassembled with methacrylic acid.
Analytical Chemistry, 73, (16), 3869-3874, (2001)
   

Takeuchi T et al., Molecularly imprinted polymer library on a microtiter plate. High-throughput synthesis and assessment of cinchona alkaloid-imprinted polymers.
Instrumentation Science & Technology, 29, (1), 1-9, (2001)
   

Takeuchi T et al., Combinatorial molecular imprinting for formation of atrazine decomposing polymers.
Chemistry Letters, 30, (6), 530-531, (2001)
   

Mukawa T et al., Post-oxidative conversion of thiol residue to sulfonic acid in the binding sites of molecularly imprinted polymers: Disulfide based covalent molecular imprinting for basic compounds.
Analyst, 127, (11), 1407-1409, (2002)
   

Mukawa T et al., Novel strategy for molecular imprinting of phenolic compounds utilizing disulfide templates.
Journal of Pharmaceutical and Biomedical Analysis, 30, (6), 1943-1947, (2003)
   

Ikegami T et al., Bisphenol A-recognition polymers prepared by covalent molecular imprinting.
Analytica Chimica Acta, 504, (1), 131-135, (2004)
   

Komiyama M et al., Book chapter, Introduction, 
In: Molecular Imprinting, Komiyama M, Takeuchi T, Mukawa T, Asanuma H (Eds.) Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, Ch. 1, 1-8, (2004)
   

Komiyama M et al., Book chapter, Recent Challenges and Progress, 
In: Molecular Imprinting, Komiyama M, Takeuchi T, Mukawa T, Asanuma H (Eds.) Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, Ch. 8, 119-139, (2004)
   

Komiyama M et al., Book chapter, Fundamentals of Molecular Imprinting, 
In: Molecular Imprinting, Komiyama M, Takeuchi T, Mukawa T, Asanuma H (Eds.) Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, Ch. 2, 9-19, (2004)
   

Komiyama M et al., Book chapter, Applications of Molecularly Imprinted Polymers, 
In: Molecular Imprinting, Komiyama M, Takeuchi T, Mukawa T, Asanuma H (Eds.) Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, Ch. 7, 75-118, (2004)
   

Komiyama M et al., Book chapter, Conclusions and Prospects, 
In: Molecular Imprinting, Komiyama M, Takeuchi T, Mukawa T, Asanuma H (Eds.) Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, Ch. 9, 141, (2004)
   

Komiyama M et al., Book chapter, Spectroscopic Anatomy of Molecular Imprinting Reactions, 
In: Molecular Imprinting, Komiyama M, Takeuchi T, Mukawa T, Asanuma H (Eds.) Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, Ch. 5, 53-64, (2004)
   

Komiyama M et al., Book chapter, Experimental Methods (2) - Evaluation of Imprinting Efficiency, 
In: Molecular Imprinting, Komiyama M, Takeuchi T, Mukawa T, Asanuma H (Eds.) Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, Ch. 4, 47-52, (2004)
   

Komiyama M et al., Book chapter, Experimental Methods (1) - Procedures of Molecular Imprinting, 
In: Molecular Imprinting, Komiyama M, Takeuchi T, Mukawa T, Asanuma H (Eds.) Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, Ch. 3, 21-45, (2004)
   

Komiyama M et al., Book chapter, Flow Chart of a Typical Molecular Imprinting, 
In: Molecular Imprinting, Komiyama M, Takeuchi T, Mukawa T, Asanuma H (Eds.) Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, Ch. 6, 65-73, (2004)
   

Takeuchi T et al., Corrigendum to 'Signaling molecularly imprinted polymers: Molecular recognition-based sensing materials'.
Chemical Record, 5, (6), 410-411, (2005)
   

Takeuchi T et al., Molecularly imprinted polymers with signaling function based on the UV-Vis spectral change by diastereoselective binding events.
Bulletin of the Chemical Society of Japan, 78, (2), 356-360, (2005)
   

Takeuchi T et al., Signaling molecularly imprinted polymers: Molecular recognition-based sensing materials.
Chemical Record, 5, (5), 263-275, (2005)
   

Takeuchi T et al., Dopamine selective molecularly imprinted polymers via post-imprinting modification.
Organic & Biomolecular Chemistry, 4, (3), 565-568, (2006)
   

Murase N et al., Molecularly imprinted polymers bearing spiropyran-based photoresponsive binding sites capable of photo-triggered switching for molecular recognition activity.
Journal of Polymer Science Part B: Polymer Physics, 54, (16), 1637-1644, (2016)
   

Mukharji A

Madhuri R et al., Biomimetic piezoelectric quartz sensor for folic acid based on a molecular imprinting technology.
Advanced Materials Letters, 2, (4), 264-267, (2011)
   

Mukherjee J

Mukherjee J et al., Enhancing the catalytic efficiency of subtilisin for transesterification by dual bioimprinting.
Tetrahedron Letters, 56, (29), 4397-4401, (2015)
   

Mukherjee J et al., Molecular bioimprinting of lipases with surfactants and its functional consequences in low water media.
International Journal of Biological Macromolecules, 81, 544-551, (2015)
   

Mukherjee J et al., Dual bioimprinting of Thermomyces lanuginosus lipase for synthesis of biodiesel.
Biotechnology Reports, 10, 38-43, (2016)
   

Mukhopadhyay CS

Afsarimanesh N et al., Smart Sensing System for Early Detection of Bone Loss: Current Status and Future Possibilities.
Journal of Sensor and Actuator Networks, 7, (1), ArticleNo10-(2018)
   

Mukhopadhyay S

Afsarimanesh N et al., Proceeding, Development of molecular imprinted polymer interdigital sensor for C-terminal telopeptide of type I collagen, 
1-5, (2016)
   

Alahi MEE et al., Proceeding, Highly selective ion imprinted polymer based interdigital sensor for nitrite detection, 
1-5, (2016)
   

Ali H et al., Selective electrochemical detection of bisphenol A using a molecularly imprinted polymer nanocomposite.
New Journal of Chemistry, 43, (3), 1536-1543, (2019)
   

Mukhopadhyay SC

Zia AI et al., Proceeding, Introducing molecular selectivity in rapid impedimetric sensing of phthalates, 
838-843, (2014)
   

Zia AI et al., Rapid and molecular selective electrochemical sensing of phthalates in aqueous solution.
Biosensors and Bioelectronics, 67, 342-349, (2015)
   

Zia AI et al., Book chapter, Molecularly Imprinted Impedimetric Sensing of Phthalates: A Real-Time Assay Technique, 
In: Next Generation Sensors and Systems, Mukhopadhyay SC (Ed.) Springer: Ch. 3, 55-79, (2016)
   

Afsarimanesh N et al., Molecularly Imprinted Polymer-Based Electrochemical Biosensor for Bone Loss Detection.
IEEE Transactions on Biomedical Engineering, 65, (6), 1264-1271, (2018)
   

Afsarimanesh N et al., Development of IoT-Based Impedometric Biosensor for Point-of-Care Monitoring of Bone Loss.
IEEE Journal on Emerging and Selected Topics in Circuits and Systems, 8, (2), 211-220, (2018)
   

Alahi MEE et al., Imprinted polymer coated impedimetric nitrate sensor for real-time water quality monitoring.
Sensors and Actuators B: Chemical, 259, 753-761, (2018)
   

Afsarimanesh N et al., Book chapter, MIP-Based Sensor for CTx-I Detection, 
In: Electrochemical Biosensor: Point-of-Care for Early Detection of Bone Loss, Springer: Cham, 59-91, (2019)
   

Prabhu SN et al., Functionality Evaluation of Micro-Electro-Mechanical-Systems Sensor for Varied Selective Functionalization Thickness to Determine Creatinine Concentration.
IEEE Sensors Journal, 21, (15), 17244-17253, (2021)
   

Mukti RR

Zulfikar MA et al., Molecularly imprinted polymers (MIPs): a functional material for removal of humic acid from peat water.
Desalination and Water Treatment, 57, (32), 15164-15175, (2016)
   

Mulaba-Bafubiandi AF

Ahamed MEH et al., Selective extraction of gold(III) from metal chloride mixtures using ethylenediamine N-(2-(1-imidazolyl)ethyl) chitosan ion-imprinted polymer.
Hydrometallurgy, 140, 1-13, (2013)
   

Ahamed MEH et al., Ion imprinted polymers for the selective extraction of silver(I) ions in aqueous media: Kinetic modeling and isotherm studies.
Reactive and Functional Polymers, 73, (3), 474-483, (2013)
   

Mulchandani A

Meng ZH et al., Removal of estrogenic pollutants from contaminated water using molecularly imprinted polymers.
Environmental Science & Technology, 39, (22), 8958-8962, (2005)
   

Mulchandani A et al., Removal of estrogenic pollutants using synthetic endocrine disruptor receptor created by the molecular imprinting technique.
Abstracts of Papers of the American Chemical Society, 229, (ENVR), 026-026, (2005)
   

Badhulika S et al., Molecular imprinted polymer functionalized carbon nanotube sensors for detection of saccharides.
Applied Physics Letters, 107, ArticleNo093107-(2015)
   

Hu JF et al., Chemiresistor sensor based on ion-imprinted polymer (IIP)-functionalized rGO for Cd(II) ions in water.
Sensors and Actuators B: Chemical, 346, Article130474-(2021)
   

Muldoon MT

Muldoon MT et al., Polymer synthesis and characterization of a molecularly imprinted sorbent assay for atrazine.
Journal of Agricultural and Food Chemistry, 43, (6), 1424-1427, (1995)
   

Muldoon MT et al., Plastic antibodies: Molecularly-imprinted polymers.
Chemistry and Industry, 204-207, (1996)
   

Stanker LH et al., Development of molecular imprints for residue analysis.
Journal of Automatic Chemistry, 18, (3), 71-(1996)
   

Muldoon MT et al., Book chapter, Development and application of molecular imprinting technology for residue analysis, 
In: Immunochemical Technology for Environmental Applications, Aga DS, Thurman EM (Eds.) The American Chemical Society: Washington DC, Ch. 26, 314-330, (1997)
   

Muldoon MT et al., Molecularly imprinted solid phase extraction of atrazine from beef liver extracts.
Analytical Chemistry, 69, (5), 803-808, (1997)
   

Mulholland F

Klein JU et al., Template-mediated synthesis of a polymeric receptor specific to amino acid sequences.
Angewandte Chemie International Edition, 38, (13/14), 2057-2060, (1999)
   

Mullens C

Zhang M et al., Coimmobilization of Dehydrogenases and Their Cofactors in Electrochemical Biosensors.
Analytical Chemistry, 79, (6), 2446-2450, (2007)
   

Muller G

Joly C et al., Residual solvent effect on the permeation properties of fluorinated polyimide films.
Separation and Purification Technology, 16, 47-54, (1999)
   

Mullett WM

Mullett WM et al., Determination of theophylline in serum by molecularly imprinted solid-phase extraction with pulsed elution.
Analytical Chemistry, 70, (17), 3636-3641, (1998)
   

Mullett WM et al., Rapid determination of theophylline in serum by selective extraction using a heated molecularly imprinted polymer micro-column with differential pulsed elution.
Journal of Pharmaceutical and Biomedical Analysis, 21, (4), 835-843, (1999)
   

Mullett WM et al., Molecularly imprinted solid phase extraction micro-column with differential pulsed elution for theophylline determination.
Microchemical Journal, 61, (2), 143-155, (1999)
   

Mullett WM et al., Determination of nicotine in tobacco by molecularly imprinted solid phase extraction with differential pulsed elution.
Analytical Communications, 36, (6), 217-220, (1999)
   

Mullett WM et al., A 2-aminopyridine molecularly imprinted polymer surrogate micro-column for selective solid phase extraction and determination of 4-aminopyridine.
Analytica Chimica Acta, 414, (1-2), 123-131, (2000)
   

Mullett WM et al., In-tube molecularly imprinted polymer solid-phase microextraction for the selective determination of propranolol.
Analytical Chemistry, 73, (11), 2383-2389, (2001)
   

Mullett WM et al., The development of selective and biocompatible coatings for solid phase microextraction.
Journal of Separation Science, 26, (3-4), 251-260, (2003)
   

Mullett WM et al., Multidimensional on-line sample preparation of verapamil and its metabolites by a molecularly imprinted polymer coupled to liquid chromatography-mass spectrometry.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 801, (2), 297-306, (2004)
   

Mullett WM, Determination of drugs in biological fluids by direct injection of samples for liquid-chromatographic analysis.
Journal of Biochemical and Biophysical Methods, 70, (2), 263-273, (2007)
   

Mullot JU

Chapuis F et al., Molecularly imprinted polymers for the clean-up of a basic drug from environmental and biological samples.
Journal of Chromatography A, 1135, (2), 127-134, (2006)
   

Hugon-Chapuis F et al., Selective and automated sample pretreatment by molecularly imprinted polymer for the analysis of the basic drug alfuzosin from plasma.
Journal of Chromatography A, 1196-1197, (1-2), 73-80, (2008)
   

Mulyasuryani A

Mulyasuryani A et al., Molecularly Imprinted Polymers Chitosan-Glutaraldehyde for Monosodium Glutamate.
IOP Conference Series: Materials Science and Engineering, 299, (1), ArticleNo012010-(2018)
   

Mulyasuryani A et al., Simultaneous Voltammetric Detection of Acetaminophen and Caffeine Base on Cassava Starch-Fe3O4 Nanoparticles Modified Glassy Carbon Electrode.
Chemosensors, 7, (4), ArticleNo49-(2019)
   

Mustaghfiroh AM et al., Development of Chlorpyrifos Sensor Using Molecularly Imprinted Polymer (MIP) Polyvinyl Alcohol (PVA)-Fe3O4 as Receptor.
The Journal of Pure and Applied Chemistry Research, 8, (1), 31-39, (2019)
   

Mun S

Jo SH et al., Continuous separation of copper ions from a mixture of heavy metal ions using a three-zone carousel process packed with metal ion-imprinted polymer.
Journal of Chromatography A, 1217, (45), 7100-7108, (2010)
   

Jo SH et al., Development of a four-zone carousel process packed with metal ion-imprinted polymer for continuous separation of copper ions from manganese ions, cobalt ions, and the constituent metal ions of the buffer solution used as eluent.
Journal of Chromatography A, 1218, (33), 5664-5674, (2011)
   

Munasinghe VK

Gunatilake SR et al., Recent advancements in analytical methods for the determination of steroidal estrogen residues in environmental and food matrices.
Analytical Methods, 8, (28), 5556-5568, (2016)
   

Munawar A

Munawar A et al., Investigating nanohybrid material based on 3D CNTs@Cu nanoparticle composite and imprinted polymer for highly selective detection of chloramphenicol.
Journal of Hazardous Materials, 342, 96-106, (2018)
   

Munawar H

Munawar H et al., Molecularly imprinted polymer nanoparticle-based assay (MINA): application for fumonisin B1 determination.
Analyst, 143, (14), 3481-3488, (2018)
   

Munawar H et al., Determination of Fumonisin B1 in maize using molecularly imprinted polymer nanoparticles-based assay.
Food Chemistry, 298, Article125044-(2019)
   

Munawar H et al., Electrochemical determination of fumonisin B1 using a chemosensor with a recognition unit comprising molecularly imprinted polymer nanoparticles.
Sensors and Actuators B: Chemical, 321, Article128552-(2020)
   

Mundhe DG

More VN et al., Microextraction techniques in extraction of drugs.
International Journal of Research in Pharmacy and Chemistry, 3, (2), 330-344, (2013)
   

Mungali M

Singh KP et al., Use of Isoproturon Imprinted Polymer Membranes as a Selective Recognition Platform in a Resistance Based Electrochemical Sensor.
Open Journal of Applied Biosensor, 2, (1), 20-28, (2013)
   

Munir H

Hussain T et al., Molecular Imprinted Titania Sol-Gel Layer for Conductometric Sensing of p-Nitrophenol.
Sensor Letters, 12, (11), 1682-1687, (2014)
   

Munoz Aldeguer B

Mavliutova L et al., Discrimination between sialic acid linkage modes using sialyllactose-imprinted polymers.
RSC Advances, 11, (36), 22409-22418, (2021)
   

Munter T

Albers W et al., Self-Assembly of Pyridine-Modified Lipoic Acid Derivatives on Gold and Their Interaction with Thyroxine (T4).
International Journal of Molecular Sciences, 14, (2), 3500-3513, (2013)
   

Albers WM et al., Self-Assembly of Pyridine-Modified Lipoic Acid Derivatives on Gold and Their Interaction with Thyroxine (T4).
International Journal of Molecular Sciences, 14, (2), 3500-3513, (2013)
   

Munyati MO

Munyati MO et al., Polyaniline nanoparticles for the selective recognition of aldrin: Synthesis, characterization, and adsorption properties.
Synthetic Metals, 233, 79-85, (2017)
   

Muppariqoh NM

Muppariqoh NM et al., Detection of vitamin b 1 (thiamine) using modified carbon paste electrodes with polypyrrole.
IOP Conference Series: Earth and Environmental Science, 58, (1), ArticleNo012050-(2017)
   

Murab S

Grace SV et al., Removal of 17[beta]-Estradiol from Groundwater Using Nanoporous Molecularly Imprinted Polymer Adsorbent.
Journal of Hazardous, Toxic, and Radioactive Waste, 16, (2), 183-189, (2012)
   

Murakami S

Murakami S et al., Amino acid-imprinted polymers with reconstitutable binding sites.
Polymer Preprints, Japan, 55, (2), 5241-5242, (2006)
   

Takeuchi T et al., Photoresponsive porphyrin-imprinted polymers prepared using a novel functional monomer having diaminopyridine and azobenzene moieties.
Organic & Biomolecular Chemistry, 5, (15), 2368-2374, (2007)
   

Murakami S et al., A molecularly imprinted polymer for the reconstruction of a molecular recognition region.
Chemistry Letters, 37, (10), 1028-1029, (2008)
   

Murakami T

Murakami T et al., Molecularly imprinted polymer solid-phase extraction of synthetic cathinones from urine and whole blood samples.
Journal of Separation Science, 41, (24), 4506-4514, (2018)
   

Murakami Y

Fujiwara I et al., Development of a Dysprosium(III) Ion-selective Electrode Using a Dysprosium(III)-imprinted Polymer.
Bunseki Kagaku, 65, (9), 527-531, (2016)
   

Muraki M

Nakagawa H et al., Spacer effect in the template polycondensation of nucleotide analogs with diamines.
Makromolekulare Chemie-Macromolecular Chemistry And Physics, 183, (9), 2065-2070, (1982)
   

Murakoshi K

Yoshikawa M et al., Chiral separation membranes from modified polysulfone having myrtenal-derived terpenoid side groups.
European Polymer Journal, 42, (10), 2532-2539, (2006)
   

Muralidharan S

Harris L et al., Metal ion imprinted polymers for biomolecular recognition.
Abstracts of Papers of the American Chemical Society, 222, (ANYL), 90-90, (2001)
   

Muralidharan S et al., Organized molecular self-assemblies for metal ion recognition.
Abstracts of Papers of the American Chemical Society, 222, U373-U374, (2001)
   

Muramatsu Y

Kitade T et al., Potentiometric immunosensor using artificial antibody based on molecularly imprinted polymers.
Analytical Chemistry, 76, (22), 6802-6807, (2004)
   

Murase N

Maki H et al., Catechol amines selective polymers prepared by molecular imprinting.
Polymer Preprints, Japan, 54, (1), 1486-(2005)
   

Takeuchi T et al., Dopamine selective molecularly imprinted polymers via post-imprinting modification.
Organic & Biomolecular Chemistry, 4, (3), 565-568, (2006)
   

Murase N et al., Fluorescence Reporting of Binding Interactions of Target Molecules with Core-Shell-Type Cortisol-Imprinted Polymer Particles Using Environmentally Responsible Fluorescent-Labeled Cortisol.
Macromolecular Chemistry And Physics, 216, (13), 1396-1404, (2015)
   

Murase N et al., A molecularly imprinted nanocavity-based fluorescence polarization assay platform for cortisol sensing.
Journal of Materials Chemistry B, 4, (10), 1770-1777, (2016)
   

Murase N et al., Molecularly imprinted polymers bearing spiropyran-based photoresponsive binding sites capable of photo-triggered switching for molecular recognition activity.
Journal of Polymer Science Part B: Polymer Physics, 54, (16), 1637-1644, (2016)
   

Murashima T

Matsui J et al., Molecular Imprinting under Molecular Crowding Conditions: An Aid to the Synthesis of a High-Capacity Polymeric Sorbent for Triazine Herbicides.
Analytical Chemistry, 79, (4), 1749-1757, (2007)
   

Matsui J et al., Face-to-face porphyrin moieties assembled with spacing for pyrazine recognition in molecularly imprinted polymers.
Biosensors and Bioelectronics, 25, (3), 635-639, (2009)
   

Nogami H et al., Nicotine-Selective Polymeric Adsorbent Obtained by Molecular Imprinting with Excess Use of Itaconic Acid.
Chromatography, 38, (1), 15-21, (2017)
   

Murata M

Maeda M et al., Template-dependent metal adsorptivity of dialkyl phosphate-type resins prepared by surface template polymerization technique.
Analytical Sciences, 10, (1), 113-115, (1994)
   

Uezu K et al., Novel metal ion-imprinted resins prepared by surface template polymerization with W/O emulsion.
Journal of Chemical Engineering of Japan, 27, (3), 436-438, (1994)
   

Murata M et al., Metal ion selectivity of surface templated resins carrying phosphate groups.
Analytical Science &Technology, 8, (4), 529-534, (1995)
   

Murata M et al., Template-dependent selectivity in metal adsorption on phosphoric diester-carrying resins prepared by surface template polymerization technique.
Bulletin of the Chemical Society of Japan, 69, (3), 637-642, (1996)
   

Tsukagoshi K et al., Book chapter, Imprinting polymerization for for recognition and separation of metal ions, 
In: Molecularly Imprinted Polymers: Man-Made Mimics of Antibodies and their Applications in Analytical Chemistry, Sellergren B (Ed.) Elsevier: Amsterdam, Ch. 9, 245-269, (2001)
   

Muratsugu S

Weng ZH et al., Preparation of surface molecularly imprinted Ru-complex catalysts for asymmetric transfer hydrogenation in water media.
Dalton Transactions, 40, (10), 2338-2347, (2011)
   

Muratsugu S et al., Molecularly Imprinted Ru Complex Catalysts Integrated on Oxide Surfaces.
Accounts of Chemical Research, 46, (2), 300-311, (2012)
   

Yang Y et al., Preparation and Catalytic Performances of a Molecularly Imprinted Ru-Complex Catalyst with an NH2 Binding Site on a SiO2 Surface.
Chemistry - A European Journal, 18, (4), 1142-1153, (2012)
   

Muratsugu S et al., Book chapter, Molecularly Imprinted Polymers as Catalysts toward Artificial Enzymes, 
In: Handbook of Molecularly Imprinted Polymers, Alvarez-Lorenzo C, Concheiro A (Eds.) Smithers Rapra: Ch. 7, 259-308, (2013)
   

Muratsugu S et al., Preparation and catalytic performance of a molecularly imprinted Pd complex catalyst for Suzuki cross-coupling reactions.
Dalton Transactions, 46, (10), 3125-3134, (2017)
   

Muratsugu S et al., Chemoselective epoxidation of cholesterol derivatives on a surface-designed molecularly imprinted Ru-porphyrin catalyst.
Chemical Communications, 54, (40), 5114-5117, (2018)
   

Murawaki Y

Kobayashi T et al., Molecular imprinting of caffeine and its recognition assay by quartz-crystal microbalance.
Analytica Chimica Acta, 435, (1), 141-149, (2001)
   

Muri EMF

de B.Peçanha BR et al., Molecularly imprinted polymers prepared by precipitation polymerization and their application to solid phase extraction (Polímeros de Impressão Molecular Obtidos Através de Polimerização por Precipitação e sua Aplicação na Técnica de Extração em Fase Sólida).
Polimeros, 23, (4), 509-513, (2013)
   

Murib MS

Peeters M et al., MIP-based biomimetic sensor for the electronic detection of serotonin in human blood plasma.
Sensors and Actuators B: Chemical, 171-172, 602-610, (2012)
   

Murkovic M

Murkovic M, Analysis of heterocyclic aromatic amines.
Analytical and Bioanalytical Chemistry, 389, (1), 139-146, (2007)
   

Murray A

Murray A et al., Application of molecularly imprinted and non-imprinted polymers for removal of emerging contaminants in water and wastewater treatment: a review.
Environmental Science and Pollution Research, 19, (9), 3820-3830, (2012)
   

Murray A et al., Removal of endocrine disrupting compounds from wastewater using polymer particles.
Water Science And Technology, 73, (1), 176-181, (2016)
   

Murray BS

Mahon CS et al., Templating a polymer-scaffolded dynamic combinatorial library.
Chemical Communications, 47, (25), 7209-7211, (2011)
   

Mahon C et al., Investigating templating within Polymer-Scaffolded Dynamic Combinatorial Libraries.
Polymer Chemistry, 4, (2), 368-377, (2013)
   

Murray G

Kimaro A et al., Molecularly imprinted permeable membrane for uranyl ion.
Abstracts of Papers of the American Chemical Society, 220, (IEC), 50-50, (2000)
   

Murray G et al., Synthetic and spectroscopic characterization of molecularly imprinted polymer phosphonate sensors.
Abstracts of Papers of the American Chemical Society, 227, (POLY), 593-593, (2004)
   

Murray GM

Zeng XF et al., Synthesis and characterization of site-selective ion-exchange resins templated for lead(II) ion.
Separation Science and Technology, 31, (17), 2403-2418, (1996)
   

Bzhelyanskiy A et al., A metal ion-templated polymeric sensor for lead.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 29-29, (1997)
   

Jenkins AL et al., Polymer based lanthanide luminescent sensors for the detection of nerve agents.
Analytical Communications, 34, 221-224, (1997)
   

Murray GM et al., Molecularly imprinted polymers for the selective sequestering and sensing of ions.
Johns Hopkins APL Technical Digest, 18, (4), 464-472, (1997)
   

Murray GM et al., Chemical slippers.
New Scientist, 34-37, (1997)
   

Zeng XF et al., Templated polymers for the selective sequestering and sensing of metal ions.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 146-146, (1997)
   

Zeng XF et al., A lead ion-imprinted polymer and its application in a lead ion-selective electrode.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 24-24, (1997)
   

Bae SY et al., Photometric method for the determination of Pb2+ following separation and preconcentration using a templated ion-exchange resin.
Journal of Analytical Atomic Spectrometry, 13, (10), 1177-1180, (1998)
   

Zeng XF et al., Book chapter, Imprinted polymers for the selective sequestering and sensing of metal ions, 
In: Molecular and Ionic Recognition with Imprinted Polymers, Bartsch RA, Maeda M (Eds.) The American Chemical Society: Washington DC, Ch. 15, 218-237, (1998)
   

Arnold BR et al., Progress in the development of molecularly imprinted polymer sensors.
Johns Hopkins APL Technical Digest, 20, (2), 190-198, (1999)
   

Bae SY et al., Molecularly imprinted ion exchange resin for purification, preconcentration and determination of UO22+ by spectrophotometry and plasma spectrometry.
Analytica Chimica Acta, 397, (1-3), 173-181, (1999)
   

Jenkins AL et al., Polymer-based lanthanide luminescent sensor for detection of the hydrolysis product of the nerve agent Soman in water.
Analytical Chemistry, 71, (2), 373-378, (1999)
   

Murray GM, y OM*, [RE] Portable sensor for illicit cocaine based on a molecularly imprinted polymer.
unknown source, (2000)
   

Kimaro A et al., Molecularly imprinted ionically permeable membrane for uranyl ion.
Chemical Communications, (14), 1282-1283, (2001)
   

Murray GM et al., Proceeding, Imprinted polymer sensors for contamination detection, 
Chen YR, Tu SI (Eds.), 131-139, (2001)
   

Murray GM et al., Book chapter, Ionic sensors based on molecularly imprinted polymers, 
In: Molecularly Imprinted Polymers: Man-Made Mimics of Antibodies and their Applications in Analytical Chemistry, Sellergren B (Ed.) Elsevier: Amsterdam, Ch. 19, 441-465, (2001)
   

Murray GM, Proceeding, Molecularly imprinted ionomers, 
Shea KJ, Yan M, Roberts MJ, Cremer PS, Crooks RM, Sailor MJ (Eds.), 67-76, (2002)
   

Boyd JW et al., Development of molecularly imprinted polymer sensors for chemical warfare agents.
Johns Hopkins APL Technical Digest, 25, (1), 44-49, (2004)
   

Murray GM et al., Book chapter, Optical transduction schemes for molecularly imprinted polymer sensors, 
In: Molecularly Imprinted Materials-2003, Kofinas P, Sellergren B, Roberts MJ (Eds.) Materials Research Society: Warrendale, Ch. 10, 61-70, (2004)
   

Kimaro A et al., Synthesis and characterization of molecularly imprinted uranyl ion exchange resins.
Separation Science and Technology, 40, (10), 2035-2052, (2005)
   

Murray GM et al., Book chapter, Metal ion selective molecularly imprinted polymers, 
In: Molecularly Imprinted Materials: Science and Technology, Yan M, Ramström O (Eds.) Marcel Dekker: New York, Ch. 22, 579-602, (2005)
   

Owens GS et al., Molecularly imprinted ion-exchange resin for Fe3+.
Separation Science and Technology, 40, (11), 2205-2211, (2005)
   

Van Houten KA et al., Soluble and processable molecularly imprinted polymers.
Abstracts of Papers of the American Chemical Society, 230, (ANYL), 401-401, (2005)
   

Southard GE et al., Book chapter, Synthesis and spectroscopic characterization of molecularly imprinted polymer phosphonate sensors, 
In: Antiterrorism and Homeland Defense: Polymers and Materials, Reynolds JG, Lawson GE (Eds.) Oxford University Press, USA: Ch. 2, 19-38, (2007)
   

Southard GE et al., Luminescent sensing of organophosphates using europium(III) containing imprinted polymers prepared by RAFT polymerization.
Analytica Chimica Acta, 581, (2), 202-207, (2007)
   

Southard GE et al., Soluble and Processable Phosphonate Sensing Star Molecularly Imprinted Polymers.
Macromolecules, 40, (5), 1395-1400, (2007)
   

Izenberg NR et al., Astrobiological molecularly imprinted polymer sensors.
Planetary and Space Science, 57, (7), 846-853, (2009)
   

Southard GE et al., Book chapter, Molecularly Imprinted Polymer Receptors for Sensors and Arrays, 
In: Recognition Receptors in Biosensors, Zourob M (Ed.) Springer: Ch. 19, 751-775, (2010)
   

Verma A et al., A Path to Soluble Molecularly Imprinted Polymers.
Journal of Functional Biomaterials, 3, (1), 1-22, (2012)
   

Bomar EM et al., Nitrate Ion Selective Electrode Based on Ion Imprinted Poly(N-methylpyrrole).
Chemosensors, 5, (1), ArticleNo2-(2017)
   

Murray LM

Murray LM et al., Bioimprinted polymer platforms for cell culture using soft lithography.
Journal of Nanobiotechnology, 12, Article No 60-(2014)
   

Murtaza G

Rizvi AS et al., Development of Molecularly Imprinted 2D Photonic Crystal Hydrogel Sensor for Detection of L-Kynurenine in Human Serum.
Talanta, 208, Article120403-(2020)
   

Murthy RC

Mudiam MKR et al., Determination of t, t-muconic acid in urine samples using a molecular imprinted polymer combined with simultaneous ethyl chloroformate derivatization and pre-concentration by dispersive liquid-liquid microextraction.
Analytical and Bioanalytical Chemistry, 405, (1), 341-349, (2013)
   

Murugan R

Saranya R et al., Book chapter, Affinity Membranes for Capture of Cells and Biological Substances, 
In: Filtering Media by Electrospinning: Next Generation Membranes for Separation Applications, Focarete ML, Gualandi C, Ramakrishna S (Eds.) Springer International Publishing: Cham, 175-195, (2018)
   

Musa NH

Halim NFAB et al., Proceeding, Highly sensitive reduce graphene oxide - Molecular imprinted polymer organic thin film transistor for serine detection, 
284-287, (2016)
   

Halim NFAB et al., Reduced graphene oxide/molecular imprinted polymer-organic thin film transistor for amino acid detection.
AIP Conference Proceedings, 1808, (1), ArticleNo020019-(2017)
   

Musavi SM

Musavi SM et al., Prepration the Sensor of Imprinting Molecular Polymer Based on Polyaniline to Recognize Agricultural Toxin Chlorpyrifos and Diazinon.
Life Science Journal-Acta Zhengzhou University Overseas Edition, 9, (2), 1280-1285, (2012)
   

Mushtaq A

Farooq S et al., Molecularly imprinted polymers' application in pesticide residue detection.
Analyst, 143, (17), 3971-3989, (2018)
   

Musile G

Bossi AM et al., Molecularly Imprinted Nanoparticles for Hepcidin Capture: A Synthetic Alternative to Natural Antibodies.
American Journal of Hematology, 88, (5), E115-E115, (2013)
   

Musile G et al., Screening of the binding properties of molecularly imprinted nanoparticles via capillary electrophoresis.
Analytical and Bioanalytical Chemistry, 408, (13), 3435-3443, (2016)
   

Mussini PR

Pietrzyk A et al., Melamine Acoustic Chemosensor Based on Molecularly Imprinted Polymer Film.
Analytical Chemistry, 81, (24), 10061-10070, (2009)
   

Musta B

Rahman ML et al., Ion-Imprinted Polymer for Selective Separation of Cerium(III) Ions from Rare Earth Mixture.
Journal of Nanoscience and Nanotechnology, 19, (9), 5796-5802, (2019)
   

Mustafa F

Mustafa F et al., Multifunctional Nanotechnology-Enabled Sensors for Rapid Capture and Detection of Pathogens.
Sensors, 17, (9), ArticleNo2121-(2017)
   

Mustafa G

Iqbal N et al., QCM-Arrays for Sensing Terpenes in Fresh and Dried Herbs via Bio-Mimetic MIP Layers.
Sensors, 10, (7), 6361-6376, (2010)
   

Lieberzeit PA et al., From metal ions to biospecies: template-assisted synthesis as a strategy to generate artificial receptor materials.
Advanced Materials Letters, 2, (5), 319-321, (2011)
   

Bajwa S et al., Nanostructured materials with biomimetic recognition abilities for chemical sensing.
Nanoscale Research Letters, 7, (1), 328-(2012)
   

Iqbal N et al., Mass sensitive multi-sensor platform for receptor screening and quantification purposes.
Journal of the Chinese Advanced Materials Society, 1, (3), 200-209, (2013)
   

Kotova K et al., MIP sensors on the way to biotech applications: Targeting selectivity.
Sensors and Actuators B: Chemical, 189, 199-202, (2013)
   

Mustafa G et al., Book chapter, MIP Sensors on the Way to Real-World Applications, 
In: Designing Receptors for the Next Generation of Biosensors, Piletsky SA, Whitcombe MJ (Eds.) Springer: Berlin, Heidelberg, 167-187, (2013)
   

Mustafa G et al., Molecularly imprinted polymer-Ag2S nanoparticle composites for sensing volatile organics.
RSC Advances, 4, (25), 12723-12728, (2014)
   

Mujahid A et al., Label-Free Bioanalyte Detection from Nanometer to Micrometer Dimensions-Molecular Imprinting and QCMs.
Biosensors, 8, (2), ArticleNo52-(2018)
   

Yasinzai M et al., Ion imprinted polymer based receptors for sensitive and selective detection of mercury ions in aqueous environment.
Journal of Sensors, ArticleNo8972549-(2018)
   

Asghar N et al., Real-Time and Online Monitoring of Glucose Contents by Using Molecular Imprinted Polymer-Based IDEs Sensor.
Applied Biochemistry and Biotechnology, 189, (4), 1156-1166, (2019)
   

Malik MI et al., Recent Applications of Molecularly Imprinted Polymers in Analytical Chemistry.
Separation & Purification Reviews, 48, (3), 179-219, (2019)
   

Mustafa S

El Shaer A et al., Contact lenses as drug reservoirs & delivery systems: the successes & challenges.
Therapeutic Delivery, 5, (10), 1085-1100, (2014)
   

Mustafa YL

Daniels E et al., Optimization of Cortisol-Selective Molecularly Imprinted Polymers Enabled by Molecular Dynamics Simulations.
ACS Applied Bio Materials, 4, (9), 7243-7253, (2021)
   

Mustafai FA

Balouch A et al., Review: Arsenic Remediation by Synthetic and Natural Adsorbents.
Pakistan Journal of Analytical & Environmental Chemistry, 18, (1), 18-36, (2017)
   

Kumar A et al., Remediation techniques applied for aqueous system contaminated by toxic Chromium and Nickel ion.
Geology, Ecology, and Landscapes, 1, (2), 143-153, (2017)
   

Mustafai FA et al., Microwave-assisted synthesis of imprinted polymer for selective removal of arsenic from drinking water by applying Taguchi statistical method.
European Polymer Journal, 109, 133-142, (2018)
   

Mustaghfiroh AM

Mustaghfiroh AM et al., Development of Chlorpyrifos Sensor Using Molecularly Imprinted Polymer (MIP) Polyvinyl Alcohol (PVA)-Fe3O4 as Receptor.
The Journal of Pure and Applied Chemistry Research, 8, (1), 31-39, (2019)
   

Mustapa NRN

Mustapa NRN et al., Ion imprinted polymers for selective recognition and separation of lanthanum and cerium ions from other lanthanide.
Separation Science and Technology, 51, (17), 2762-2771, (2016)
   

Musteata FM

Musteata FM et al., Study of ligand-receptor binding using SPME: Investigation of receptor, free, and total ligand concentrations.
Journal of Proteome Research, 4, (3), 789-800, (2005)
   

Musyoka S

Mamba BB et al., Book chapter, Advances in Nanostructured Polymers and Membranes for Removal of Heavy Metals in Water, 
In: Aquananotechnology: Global Prospects, Reisner DE, Pradeep T (Eds.) CRC Press: Boca Raton, Ch. 20, 399-418, (2014)
   

Mutakin M

Suryana S et al., Rational design of salmeterol xinafoate imprinted polymer through computational method: Functional monomer and crosslinker selection.
Polymers for Advanced Technologies, 33, (1), 221-234, (2022)
   

Mutetwa R

Nicoara SC et al., Development of sample clean up methods for the analysis of Mycobacterium tuberculosis methyl mycocerosate biomarkers in sputum extracts by gas chromatography-mass spectrometry.
Journal of Chromatography B, 986-987, 135-142, (2015)
   

Muthukumar K

Karthikeyan M et al., Theoretical Screening and Selection of Functional Monomers for Molecular Imprinted Electropolymer as Sensor for Glutamate.
Sensor Letters, 16, (8), 590-597, (2018)
   

Muti M

Soysal M et al., A Novel and Selective Methylene Blue Imprinted Polymer Modified Carbon Paste Electrode.
Electroanalysis, 25, (5), 1278-1285, (2013)
   

Muti M et al., Book chapter, Molecularly Imprinted Polymer-Based Biosensors, 
In: Portable Biosensing of Food Toxicants and Environmental Pollutants, Nikolelis DP, Varzakas T, Erdem A, Nikoleli GP (Eds.) CRC Press: Boca Raton, Fl., Ch. 14, 373-394, (2014)
   

Muti M et al., A Novel DNA Probe Based on Molecularly Imprinted Polymer Modified Electrode for the Electrochemical Monitoring of DNA.
Electroanalysis, 27, (6), 1368-1377, (2015)
   

Gençdag Sensoy K et al., Highly selective molecularly imprinting polymer-based sensor for the electrochemical determination of metoxuron.
Microchemical Journal, 158, Article105178-(2020)
   

Muto E

Fujikawa S et al., Nanochannel Design by Molecular Imprinting on a Free-Standing Ultrathin Titania Membrane.
Langmuir, 25, (19), 11563-11568, (2009)
   

Mutreja I

Mutreja I et al., Positive and negative bioimprinted polymeric substrates: new platforms for cell culture.
Biofabrication, 7, (2), ArticleNo025002-(2015)
   

Muzani AA

Karmanto K et al., Preparation of Creatinine Sensor Material By Molecularly Imprinted Method Using MBAA and AMPSA as Precursors (Preparasi Material Sensor Kreatinin dengan Metode Molecularly Imprinted Menggunakan Prekursor MBAA dan AMPSA).
Al Kimia, 6, (2), 97-112, (2018)
   

Muzyka K

Muzyka K et al., Book chapter, Molecularly Imprinted Polymer-based Voltammetric Sensors, 
In: Handbook of Molecularly Imprinted Polymers, Alvarez-Lorenzo C, Concheiro A (Eds.) Smithers Rapra: Ch. 5, 197-228, (2013)
   

Muzyka K et al., Optimisation of the synthesis of vancomycin-selective molecularly imprinted polymer nanoparticles using automatic photoreactor.
Nanoscale Research Letters, 9, Article No 154-(2014)
   

Muzyka K, Current trends in the development of the electrochemiluminescent immunosensors.
Biosensors and Bioelectronics, 54, 393-407, (2014)
   

Muzyka K et al., Theoretical quantum mechanical based studies of melamine - monomers interaction in pre-polymerisation phase.
Journal of the Chinese Advanced Materials Society, 4, (1), 24-35, (2016)
   

Muzyka KM

Muzyka KM, Theoretical study of energy characteristics of "artificial receptor" on melamine in pre-polymerization phase.
Journal of Nano- and Electronic Physics, 7, (1), ArticleNo01017-(2015)
   

Muzyka KM, Computational experiments for investigation of the «template»-«artificial receptors» formation kinetics.
Technology Audit and Production Reserves, 3, (2), 70-73, (2015)
   

Bani-Khaled GFH et al., Method of molecular mechanics in the rationale choice of functional monomers specific to vancomycin.
Information Processing Systems, 1(147), 152-154, (2017)
   

Muzzalupo R

Puoci F et al., Spherical molecularly imprinted polymers (SMIPs) via a novel precipitation polymerization in the controlled delivery of sulfasalazine.
Macromolecular Bioscience, 4, (1), 22-26, (2004)
   

Puoci F et al., Molecularly imprinted solid phase extraction for detection of sudan I in food matrices.
Food Chemistry, 93, (2), 349-353, (2005)
   

Muños-Olivas R

Gallego-Gallegos M et al., Imprinted polymers as an analytical tool for organotin compounds speciation.
Journal of Analytical Atomic Spectrometry, 24, (5), 595-601, (2009)
   

Muñoz R

Bueno D et al., Portable and low cost fluorescence set-up for in-situ screening of Ochratoxin A.
Talanta, 159, 395-400, (2016)
   

Bueno-Hernández D et al., Low cost optical device for detection of fluorescence from Ochratoxin A using a CMOS sensor.
Sensors and Actuators B: Chemical, 246, 606-614, (2017)
   

Muñoz-Olivas R

Puri BK et al., A new polymeric adsorbent for screening and pre-concentration of organotin compounds in sediments and seawater samples.
Spectrochimica Acta Part B-Atomic Spectroscopy, 59, (2), 209-214, (2004)
   

Gallego-Gallegos M et al., Synthesis and evaluation of molecularly imprinted polymers for organotin compounds: a screening method for tributyltin detection in seawater.
Analytica Chimica Acta, 531, (1), 33-39, (2005)
   

Gallego-Gallegos M et al., Synthesis of a pH dependent covalent imprinted polymer able to recognize organotin species.
Analyst, 131, (1), 98-105, (2006)
   

Dietz C et al., Current perspectives in analyte extraction strategies for tin and arsenic speciation.
Journal of Chromatography A, 1153, (1-2), 114-129, (2007)
   

Gallego-Gallegos M et al., Different formats of imprinted polymers for determining organotin compounds in environmental samples.
Journal of Environmental Management, 90, (Supplement 1), S69-S76, (2009)
   

Mwangi GK

Lavine BK et al., Swellable molecularly imprinted polyN-(N-propyl)acrylamide particles for detection of emerging organic contaminants using surface plasmon resonance spectroscopy.
Talanta, 72, (3), 1042-1048, (2007)
   

Lavine BK et al., Characterization of Swellable Molecularly Imprinted Polymer Particles by Surface Plasmon Resonance Spectroscopy.
Applied Spectroscopy, 66, (4), 440-446, (2012)
   

Myburgh P

Myburgh P et al., Selective Solid-Phase Extraction Using Molecularly Imprinted Polymers for the Analysis of Target Pesticides in Cannabis Bud.
South African Journal of Chemistry, 75, 142-149, (2021)
   

Mylonis I

Lakka A et al., Isolation of hypoxia-inducible factor 1 (HIF-1) inhibitors from frankincense using a molecularly imprinted polymer.
Investigational New Drugs, 29, (5), 1081-1089, (2011)
   

Mzoughi N

Atayat A et al., Response surface methodology approach for the preparation of a molecularly imprinted polymer for solid-phase extraction of fenoxycarb pesticide in mussels.
Journal of Separation Science, 42, (18), 3023-3032, (2019)
   

Mátel A

Dulanská S et al., Rapid determination of ^239, 240Pu, ²³⁸Pu, ²⁴¹Am and ⁹⁰Sr in high contaminated samples waste using combined SPE sorbents AnaLig^® Pu-02, AnaLig^® Sr-01 and DGA^® Resin.
Journal of Radioanalytical and Nuclear Chemistry, 295, (3), 1635-1639, (2013)
   

Mátel L

Dulanská S et al., Rapid determination of ^239, 240Pu, ²³⁸Pu, ²⁴¹Am and ⁹⁰Sr in radioactive waste using combined SPE sorbents AnaLig^® Pu02, AnaLig^® Sr01 and TRU^® Resin.
Journal of Radioanalytical and Nuclear Chemistry, 293, (1), 81-85, (2012)
   

Mähner J

Lieberzeit PA et al., Artificial receptor layers for detecting chemical and biological threats.
Procedia Engineering, 5, 381-384, (2010)
   

Månsson MO

Månsson MO et al., Improved chromatography - prearranged distances between boronate groups by the molecular imprinting approach.
Biological Chemistry Hoppe-Seyler, 368, (7), 761-761, (1987)
   

Norrlöw O et al., Improved chromatography - prearranged distances between boronate groups by the molecular imprinting approach.
Journal of Chromatography, 396, (1), 374-377, (1987)
   

Ståhl M et al., The synthesis of a d-amino-acid ester in an organic media with a-chymotrypsin modified by a bio-imprinting procedure.
Biotechnology Letters, 12, 161-166, (1990)
   

Ståhl M et al., Induced stereoselectivity and substrate selectivity of bio-imprinted a-chymotrypsin in anhydrous organic media.
Journal of the American Chemical Society, 113, (24), 9366-9368, (1991)
   

Mégret P

González-Vila Á et al., Proceeding, Formaldehyde sensing with plasmonic near-infrared optical fiber grating sensors, 
ArticleNo989917, (2016)
   

González-Vila Á et al., Molecularly imprinted electropolymerization on a metal-coated optical fiber for gas sensing applications.
Sensors and Actuators B: Chemical, 244, 1145-1151, (2017)
   

Ménager C

Cazares-Cortes E et al., Magnetic Nanoparticles Create Hot Spots in Polymer Matrix for Controlled Drug Release.
Nanomaterials, 8, (10), ArticleNo850-(2018)
   

Griffete N et al., Thermal Polymerization on the Surface of Iron Oxide Nanoparticles Mediated by Magnetic Hyperthermia: Implications for Multishell Grafting and Environmental Applications.
ACS Applied Nano Materials, 1, (2), 547-555, (2018)
   

Boitard C et al., Biological Fate of Magnetic Protein-Specific Molecularly Imprinted Polymers: Toxicity and Degradation.
ACS Applied Materials & Interfaces, 11, (39), 35556-35565, (2019)
   

Garnier M et al., Hybrid Molecularly Imprinted Polymers: The Future of Nanomedicine?
Nanomaterials, 11, (11), ArticleNo3091-(2021)
   

Méndez-Palacios I

Méndez-Palacios I et al., Proceeding, Development of a Molecularly Imprinted Polymer (MIP) for the Recovery of Lactoferrin, 
1309-1313, (2006)
   

Jiménez-Guzmán J et al., Development of a molecularly imprinted polymer for the recovery of lactoferrin.
Food and Bioproducts Processing, 92, (2), 226-232, (2014)
   

Mêna MT

Ferreira VRA et al., Cationic imprinting of Pb(II) within composite networks based on bovine or fish chondroitin sulfate.
Journal of Molecular Recognition, 31, (3), ArticleNoe2614-(2018)
   

Möder M

Prieto A et al., Synthesis of a molecularly imprinted polymer and its application for microextraction by packed sorbent for the determination of fluoroquinolone related compounds in water.
Analytica Chimica Acta, 685, (2), 146-152, (2011)
   

Prieto A et al., Selective determination of estrogenic compounds in water by microextraction by packed sorbents and a molecularly imprinted polymer coupled with large volume injection-in-port-derivatization gas chromatography-mass spectrometry.
Analytica Chimica Acta, 703, (1), 41-51, (2011)
   

Schillinger E et al., An Artificial Estrogen Receptor through Combinatorial Imprinting.
Chemistry - A European Journal, 18, (46), 14773-14783, (2012)
   

Zarejousheghani M et al., Selective mixed-bed solid phase extraction of atrazine herbicide from environmental water samples using molecularly imprinted polymer.
Talanta, 129, 132-138, (2014)
   

Zarejousheghani M et al., Ion-exchange molecularly imprinted polymer for the extraction of negatively charged acesulfame from wastewater samples.
Journal of Chromatography A, 1411, 23-33, (2015)
   

Zarejousheghani M et al., Negative electrospray ionization ion mobility spectrometry combined with paper-based molecular imprinted polymer disks: A novel approach for rapid target screening of trace organic compounds in water samples.
Talanta, 190, 47-54, (2018)
   

Zarejousheghani M et al., A new strategy for accelerated extraction of target compounds using molecularly imprinted polymer particles embedded in a paper-based disk.
Journal of Molecular Recognition, 31, (3), ArticleNoe2629-(2018)
   

Möhwald H

Rajkumar R et al., Analysis of recognition of fructose by imprinted polymers.
Talanta, 76, (5), 1119-1123, (2008)
   

Möller K

Möller K et al., Synthesis and evaluation of molecularly imprinted polymers for extracting hydrolysis products of organophosphate flame retardants.
Journal of Chromatography A, 938, (1-2), 121-130, (2001)
   

Andersson LI et al., Development of a molecularly imprinted polymer based solid-phase extraction of local anaesthetics from human plasma.
Analytica Chimica Acta, 526, (2), 147-154, (2004)
   

Möller K et al., Investigation of matrix effects of urine on a molecularly imprinted solid-phase extraction.
Journal of Chromatography B, 811, (2), 171-176, (2004)
   

Möller K et al., Determination of a flame retardant hydrolysis product in human urine by SPE and LC-MS. Comparison of molecularly imprinted solid-phase extraction with a mixed-mode anion exchanger.
Analytical and Bioanalytical Chemistry, 378, (1), 197-204, (2004)
   

Möller K et al., Evaluation of molecularly imprinted solid-phase extraction for a 1, 2:3, 4-diepoxybutane adduct to valine.
Journal of Chromatography B, 878, (27), 2497-2501, (2010)
   

Möller P

Yilmaz E et al., A facile method for preparing molecularly imprinted polymer spheres using spherical silica templates.
Journal of Materials Chemistry, 12, (5), 1577-1581, (2002)
   

Yilmaz E et al., Studies towards enantioselective surface imprinted polymers.
Journal of Separation Science, 32, (19), 3274-3277, (2009)
   

Mönch B

Mönch B et al., The different conformations and crystal structures of dihydroergocristine.
Journal of Molecular Structure, 1105, 389-395, (2016)
   

Müder M

Zarejousheghani M et al., A new strategy for synthesis of an in-tube molecularly imprinted polymer-solid phase microextraction device: Selective off-line extraction of 4-nitrophenol as an example of priority pollutants from environmental water samples.
Analytica Chimica Acta, 798, 48-55, (2013)
   

Müllen K

Dvorakova G et al., Molecularly Imprinted Nanospheres by Nonaqueous Emulsion Polymerization.
Macromolecular Rapid Communications, 31, (23), 2035-2040, (2010)
   

Dvorakova G et al., Nonaqueous emulsion polymerization: A practical synthetic route for the production of molecularly imprinted nanospheres.
Journal of Polymer Science Part A: Polymer Chemistry, 51, (2), 267-274, (2013)
   

Müller A

Müller A et al., Preparation of luminescent chemosensors by post-functionalization of vesicle surfaces.
Organic & Biomolecular Chemistry, 13, (6), 1690-1699, (2015)
   

Müller E

Herold M et al., A detailed investigation of the co-polymerization kinetics and particle formation of nanoscopical poly(EGDMA-co-MAA) by miniemulsion polymerization.
Polymer Preprints, 47, (2), 835-836, (2006)
   

Müller M

Paul N et al., Molecularly imprinted conductive polymers for controlled trafficking of neurotransmitters at solid-liquid interfaces.
Soft Matter, 9, (4), 1364-1371, (2013)
   

Dinc M et al., Selective Binding of Inhibitor-Assisted Surface-Imprinted Core/Shell Microbeads in Protein Mixtures.
ChemistrySelect, 3, (16), 4277-4282, (2018)
   

Schauer N et al., Selective binding of matrix metalloproteases MMP-9 and MMP-12 to inhibitor-assisted thermolysin-imprinted beads.
RSC Advances, 8, (57), 32387-32394, (2018)
   

Müller R

Fischer L et al., Direct enantioseparation of b-adrenergic blockers using a chiral stationary phase prepared by molecular imprinting.
Journal of the American Chemical Society, 113, (24), 9358-9360, (1991)
   

Müller R et al., Molecularly imprinted polymers facilitating a b-elimination reaction.
Makromolekulare Chemie-Rapid Communications, 14, (10), 637-641, (1993)
   

Vlatakis G et al., Drug assay using antibody mimics made by molecular imprinting.
Nature, 361, (6413), 645-647, (1993)
   

Andersson LI et al., Mimics of the binding-sites of opioid receptors obtained by molecular imprinting of enkephalin and morphine.
Proceedings of the National Academy of Sciences of the United States of America, 92, (11), 4788-4792, (1995)
   

Andersson LI et al., Molecular imprinting of the endogenous neuropeptide Leu(5)-enkephalin and some derivatives thereof.
Macromolecular Rapid Communications, 17, (1), 65-71, (1996)
   

Müller T

Helling S et al., Ultratrace Enrichment of Tyrosine Phosphorylated Peptides on an Imprinted Polymer.
Analytical Chemistry, 83, (5), 1862-1865, (2011)
   

Müller W

Bünemann H et al., Synthesis and properties of acrylamide-substituted base pair specific dyes for deoxyribonucleic acid template mediated synthesis of dye polymers.
Biochemistry, 20, (10), 2864-2874, (1981)
   

Müller-Buschbaum P

Paul N et al., Molecularly imprinted conductive polymers for controlled trafficking of neurotransmitters at solid-liquid interfaces.
Soft Matter, 9, (4), 1364-1371, (2013)
   

Münch J

Fresco-Cala B et al., Development and Characterization of Magnetic SARS-CoV-2 Peptide-Imprinted Polymers.
Nanomaterials, 11, (11), ArticleNo2985-(2021)