Alternatively for mipdatabase quick searches go here

Custom Search

Abstract: In this study, formaldehyde (HCHO)-imprinted hemispherical pore-patterned thin films, consisting of poly(2-(trifluoromethyl)acrylic acid-co-ethylene glycol dimethacrylate-co-styrene) (poly(TFMAA-co-EGDMA-co-ST)), were fabricated using the design of molecularly imprinted polymers (MIPs) and a subsequent lithographic micro/nanoimprinting method to amplify HCHO sensing signals in quartz crystal microbalance (QCM) sensors. Its molecular imprinting condition was optimized by controlling the added amount of a ST monomer in a MIP precursor solution. From the resonant frequency change with respect to HCHO adsorption, the imprinting factor of the porous MIP film was calculated to have a value of 2.38 and the sensitivity (0.132 mg g-1 ppm-1) of the porous MIP film exhibited markedly improved characteristics with respect to the porous non-imprinted polymer (NIP) film (0.05 mg g-1 ppm-1). The selectivity of the MIP-QCM sensors for the detection of HCHO was examined in the presence of other analogous toxic gases such as hydrogen chloride and hydrogen fluoride. The HCHO-absorbed porous MIP film had higher selective features with selectivity coefficients (k* &8776; 3.83 (HCl) and 4.46 (HF)) than porous NIP films (k* &8776; 1.53 (HCl) and 2.20 (HF)). Moreover, the relative selectivity of the porous MIP film appeared to be 2.03-2.5, which was higher than those of the planar MIP film (1.70-1.73)
Template and target information: formaldehyde
Author keywords: molecular imprinting, formaldehyde, Colloidal lithography, Pore arrays, Gravimetric sensing, sensitivity