This index last updated: 13/12/2021

Reactive and Functional Polymers

 

2022
YuanJ.WangC.Y.GaoY.HuJ.M.NiuS.L.MengX.Y.JiaT.YinR.H.
Probing the molecular basis for sulfonamides recognition in surface molecularly imprinted polymers using computational and experimental approaches
Reactive and Functional Polymers170 , Article105105.
DOI: 10.1016/j.reactfunctpolym.2021.105105

 

2022
AbbottB.BedwellT.S.GrilloF.PiletskyS.S.WhitcombeM.J.PiletskaE.Garcia-CruzA.CowenT.PiletskyS.A.
Use of polymeric solid phase in synthesis of MIP nanoparticles for biotin
Reactive and Functional Polymers170 , Article105109.
DOI: 10.1016/j.reactfunctpolym.2021.105109

 

2021
ZhaoM.H.LiZ.Z.LiX.Y.XieH.Y.ZhaoQ.Y.ZhaoM.P.
Molecular imprinting of doxorubicin by refolding thermally denatured bovine serum albumin and cross-linking with hydrogel network
Reactive and Functional Polymers168 , Article105036.
DOI: 10.1016/j.reactfunctpolym.2021.105036

 

2021
ZaharaS.MinhasM.A.ShaikhH.AliM.S.BhangerM.I.MalikM.I.
Molecular imprinting-based extraction of rosmarinic acid from Salvia hypoleuca extract
Reactive and Functional Polymers166 , Article104984.
DOI: 10.1016/j.reactfunctpolym.2021.104984

 

2021
WangZ.H.ZhangZ.Y.YanR.Y.FuX.Y.WangG.S.WangY.M.LiZ.Q.ZhangX.L.HouJ.X.
Facile fabrication of snowman-like magnetic molecularly imprinted polymer microspheres for bisphenol A via one-step Pickering emulsion polymerization
Reactive and Functional Polymers164 , Article104911.
DOI: 10.1016/j.reactfunctpolym.2021.104911

 

2021
WangZ.H.LiY.L.LiZ.Q.YanR.Y.FuX.Y.WangG.S.WangY.M.ZhangX.L.HouJ.X.
The fabrication of molecularly imprinted polymer microspheres via Pickering emulsion polymerization stabilized with novel ferric hydroxide colloid
Reactive and Functional Polymers169 , Article105084.
DOI: 10.1016/j.reactfunctpolym.2021.105084

 

2021
Viltres-PortalesM.AlbertoM.D.L.YeL.
Synthesis of molecularly imprinted polymers using an amidine-functionalized initiator for carboxylic acid recognition
Reactive and Functional Polymers165 , Article104969.
DOI: 10.1016/j.reactfunctpolym.2021.104969

 

2021
UngerC.LieberzeitP.A.
Molecularly imprinted thin film surfaces in sensing: Chances and challenges
Reactive and Functional Polymers161 , Article104855.
DOI: 10.1016/j.reactfunctpolym.2021.104855

 

2021
RoushaniM.ZalpourN.
Selective detection of Asulam with in-situ dopamine electropolymerization based electrochemical MIP sensor
Reactive and Functional Polymers169 , Article105069.
DOI: 10.1016/j.reactfunctpolym.2021.105069

 

2021
LettieriS.ManesiotisP.SlannM.LewisD.W.HallA.J.
A novel Hamilton receptor monomer for the stoichiometric molecular imprinting of barbiturates
Reactive and Functional Polymers167 , Article105031.
DOI: 10.1016/j.reactfunctpolym.2021.105031

 

2021
DuanL.K.ZhaoY.
Molecularly imprinted micelles for fluorescent sensing of nonsteroidal anti-inflammatory drugs (NSAIDs)
Reactive and Functional Polymers158 , Article104759.
DOI: 10.1016/j.reactfunctpolym.2020.104759

 

2021
de Liss Meza LópezF.KhanS.da SilvaM.A.Anchieta Gomes NetoJ.PicassoG.SotomayorM.D.P.T.
Systematic study on the synthesis of novel ion-imprinted polymers based on rhodizonate for the highly selective removal of Pb(II)
Reactive and Functional Polymers159 , Article104805.
DOI: 10.1016/j.reactfunctpolym.2020.104805

 

2021
ChenZ.C.OuX.J.JiaW.W.LiuC.ZhangJ.HuoT.ZhangX.Y.ChenY.L.SunY.ZhuJ.N.LuS.J.ZhangP.ChenZ.B.
Structureadsorption and separation comparison between the thermosensitive block segment polymer modified ReO4- ion imprinted polymer and traditional ReO4- ion imprinted polymer
Reactive and Functional Polymers164 , Article104929.
DOI: 10.1016/j.reactfunctpolym.2021.104929

 

2021
ChenQ.LiuX.M.YangH.Y.ZhangS.Y.SongH.ZhuX.
Preparation and evaluation of magnetic graphene oxide molecularly imprinted polymers (MIPs-GO-Fe3O4@SiO2) for the analysis and separation of tripterine
Reactive and Functional Polymers169 , Article105055.
DOI: 10.1016/j.reactfunctpolym.2021.105055

 

2021
CavaleraS.ChiarelloM.Di NardoF.AnfossiL.BaggianiC.
Effect of experimental conditions on the binding abilities of ciprofloxacin-imprinted nanoparticles prepared by solid-phase synthesis
Reactive and Functional Polymers163 , Article104893.
DOI: 10.1016/j.reactfunctpolym.2021.104893

 

2021
AnirudhanT.S.ManiA.AthiraV.S.
Molecularly imprinted electrochemical sensing platform for 2-Aminoadipic acida diabetes biomarker
Reactive and Functional Polymers168 , Article105056.
DOI: 10.1016/j.reactfunctpolym.2021.105056

 

2021
AlhawitiA.S.MonierM.ElsayedN.H.
Designing of amino functionalized imprinted polymeric resin for enantio-separation of (±)-mandelic acid racemate
Reactive and Functional Polymers160 , Article104828.
DOI: 10.1016/j.reactfunctpolym.2021.104828

 

2020
ZhangY.Y.HuangW.H.YinX.F.SarpongK.A.ZhangL.M.LiY.C.ZhaoS.ZhouH.D.YangW.M.XuW.Z.
Computer-aided design and synthesis of molecular imprinting polymers based on doubly oriented functional multiwalled carbon nanotubes for electrochemically sensing bisphenol A
Reactive and Functional Polymers157 , Article104767.
DOI: 10.1016/j.reactfunctpolym.2020.104767

 

2020
YangW.M.QingY.J.CaoY.F.LuanY.LuY.LiuT.S.XuW.Z.HuangW.H.LiT.Z.NiX.N.
A stimuli responsecore-shell structured and surface molecularly imprinted polymers with specific pH for rapid and selective detection of sulfamethoxazole from milk sample
Reactive and Functional Polymers151 , Article104578.
DOI: 10.1016/j.reactfunctpolym.2020.104578

 

2020
YangP.CaoH.MaiD.YeT.WuX.X.YuanM.YuJ.S.XuF.
A novel morphological ion imprinted polymers for selective solid phase extraction of Cd(II): Preparationadsorption properties and binding mechanism to Cd(II)
Reactive and Functional Polymers151 , Article104569.
DOI: 10.1016/j.reactfunctpolym.2020.104569

 

2020
TanN.JiK.HeD.X.LiaoS.HeL.Q.HanJ.W.ChenC.LiuY.Q.
Research on a kind of biocompatible molecularly imprinted materials with silybin controlled release based on pH/temperature dual responses
Reactive and Functional Polymers147 , Article104449.
DOI: 10.1016/j.reactfunctpolym.2019.104449

 

2020
ShahnaziA.NabidM.R.SedghiR.
Synthesis of surface molecularly imprinted poly-o-phenylenediamine/TiO2/carbon nanodots with a highly enhanced selective photocatalytic degradation of pendimethalin herbicide under visible light
Reactive and Functional Polymers151 , Article104580.
DOI: 10.1016/j.reactfunctpolym.2020.104580

 

2020
SerajS.LotfollahiM.N.NematollahzadehA.
Synthesis and sorption properties of heparin imprinted zeolite beta/polydopamine composite nanoparticles
Reactive and Functional Polymers147 , Article104462.
DOI: 10.1016/j.reactfunctpolym.2019.104462

 

2020
NeolakaY.A.B.LawaY.NaatJ.N.Pau RiwuA.A.DarmokoesoemoH.SupriyantoG.HoldsworthC.I.AmenaghawonA.N.KusumaH.S.
A Cr(VI)-imprinted-poly(4-VP-co-EGDMA) sorbent prepared using precipitation polymerization and its application for selective adsorptive removal and solid phase extraction of Cr(VI) ions from electroplating industrial wastewater
Reactive and Functional Polymers147 , Article104451.
DOI: 10.1016/j.reactfunctpolym.2019.104451

 

2020
LuoZ.W.GuoM.L.JiangH.GengW.H.WeiW.J.LianZ.Y.
Plasma polymerization mediated construction of surface ion-imprinted polypropylene fibers for the selective adsorption of Cr(VI)
Reactive and Functional Polymers150 , Article104552.
DOI: 10.1016/j.reactfunctpolym.2020.104552

 

2020
FanJ.P.ChengY.T.ZhangX.H.XiaoZ.P.LiaoD.D.ChenH.P.HuangK.PengH.L.
Preparation of a novel mixed non-covalent and semi-covalent molecularly imprinted membrane with hierarchical pores for separation of genistein in Radix Puerariae Lobatae
Reactive and Functional Polymers146 , Article104439.
DOI: 10.1016/j.reactfunctpolym.2019.104439

 

2020
ElsayedN.H.AlatawiA.MonierM.
Diacetylmonoxine modified chitosan derived ion-imprinted polymer for selective solid-phase extraction of nickel (II) ions
Reactive and Functional Polymers151 , Article104570.
DOI: 10.1016/j.reactfunctpolym.2020.104570

 

2020
BuffonE.HugueninJ.A.O.da SilvaL.CarneiroP.A.StradiottoN.R.
Spectroscopic ellipsometry studies of an electrochemically synthesized molecularly imprinted polymer for the detection of an aviation biokerosene contaminant
Reactive and Functional Polymers155 , Article104698.
DOI: 10.1016/j.reactfunctpolym.2020.104698

 

2020
AnirudhanT.S.ChristaJ.ShainyF.
Magnetic titanium dioxide embedded molecularly imprinted polymer nanocomposite for the degradation of diuron under visible light
Reactive and Functional Polymers152 , Article104597.
DOI: 10.1016/j.reactfunctpolym.2020.104597

 

2019
KumarN.NarayananN.GuptaS.
Ultrasonication assisted extraction of chlorpyrifos from honey and brinjal using magnetic molecularly imprinted polymers followed by GLC-ECD analysis
Reactive and Functional Polymers135 , 103-112.
DOI: 10.1016/j.reactfunctpolym.2018.12.012

 

2019
GoudarziF.HejaziP.
Effect of biomolecule chemical structure on the synthesis of surface magnetic molecularly imprinted polymer in aqueous solution using various monomers for high-capacity selective recognition of human insulin
Reactive and Functional Polymers143 , Article104322.
DOI: 10.1016/j.reactfunctpolym.2019.104322

 

2019
de OliveiraL.L.G.SuquilaF.A.C.de OliveiraF.M.ScheelG.L.TarleyC.R.T.
Synthesis and application of restricted access material-ion imprinted poly(allylthiourea) for selective separation of Cd2+ and humic acid exclusion
Reactive and Functional Polymers134 , 93-103.
DOI: 10.1016/j.reactfunctpolym.2018.11.007

 

2019
AlaeiH.S.TehraniM.S.HusainS.W.PanahiH.A.MehramiziA.
Photoresponsive molecularly imprinted dendrimer-based magnetic nanoparticles for photo-regulated selective separation of azathioprine
Reactive and Functional Polymers136 , 58-65.
DOI: 10.1016/j.reactfunctpolym.2018.12.022

 

2018
WangZ.H.QiuT.GuoL.H.YeJ.HeL.F.LiX.Y.
The synthesis of molecular recognition polymer particles via miniemulsion polymerization
Reactive and Functional Polymers126 , 1-8.
DOI: 10.1016/j.reactfunctpolym.2018.02.013

 

2018
SanjuánA.M.RuizJ.A.R.GarcíaF.C.GarcíaJ.M.
Recent developments in sensing devices based on polymeric systems
Reactive and Functional Polymers133 , 103-125.
DOI: 10.1016/j.reactfunctpolym.2018.10.007

 

2018
PisarevO.A.PolyakovaI.V.
Molecularly imprinted polymers based on methacrylic acid and ethyleneglycol dimethacrylate for l-lysine recognition
Reactive and Functional Polymers130 , 98-110.
DOI: 10.1016/j.reactfunctpolym.2018.06.002

 

2018
MonierM.El-MekabatyA.Abdel-LatifD.A.
Synthesis and evaluation of enantio-selective l-histidine imprinted salicylic acid functionalized resin
Reactive and Functional Polymers128 , 104-113.
DOI: 10.1016/j.reactfunctpolym.2018.04.011

 

2018
MathewD.ThomasB.DevakyK.S.
Biomimetic recognition and peptidase activities of transition state analogue imprinted chymotrypsin mimics
Reactive and Functional Polymers124 , 121-128.
DOI: 10.1016/j.reactfunctpolym.2018.01.005

 

2018
LaatikainenK.BrangerC.CoulombB.LenobleV.SainioT.
In situ complexation versus complex isolation in synthesis of ion imprinted polymers
Reactive and Functional Polymers122 , 1-8.
DOI: 10.1016/j.reactfunctpolym.2017.10.022

 

2018
KolerA.GornikT.KosjekT.JerabekK.KrajncP.
Preparation of molecularly imprinted copoly(acrylic acid-divinylbenzene) for extraction of environmentally relevant sertraline residues
Reactive and Functional Polymers131 , 378-383.
DOI: 10.1016/j.reactfunctpolym.2018.08.016

 

2018
KidakovaA.ReutJ.RappichJ.ÖpikA.SyritskiV.
Preparation of a surface-grafted protein-selective polymer film by combined use of controlled/living radical photopolymerization and microcontact imprinting
Reactive and Functional Polymers125 , 47-56.
DOI: 10.1016/j.reactfunctpolym.2018.02.004

 

2018
KhanS.HussainS.WongA.FoguelM.V.GonçalvesL.M.Pividori GurgoM.I.SotomayorM.
Synthesis and characterization of magnetic-molecularly imprinted polymers for the HPLC-UV analysis of ametryn
Reactive and Functional Polymers122 , 175-182.
DOI: 10.1016/j.reactfunctpolym.2017.11.002

 

2018
HassanzadehM.GhaemyM.AmininasabS.M.ShamiZ.
An effective approach for fast selective separation of Cr(VI) from water by ion-imprinted polymer grafted on the electro-spun nanofibrous mat of functionalized polyacrylonitrile
Reactive and Functional Polymers130 , 70-80.
DOI: 10.1016/j.reactfunctpolym.2018.05.013

 

2018
GhasemiS.NematollahzadehA.
Molecularly imprinted ultrafiltration polysulfone membrane with specific nano-cavities for selective separation and enrichment of paclitaxel from plant extract
Reactive and Functional Polymers126 , 9-19.
DOI: 10.1016/j.reactfunctpolym.2018.02.012

 

2018
FerreiraV.R.A.AzenhaM.A.PereiraC.M.SilvaA.F.
Molecularly imprinted polymers for enhanced impregnation and controlled release of l-tyrosine
Reactive and Functional Polymers131 , 283-292.
DOI: 10.1016/j.reactfunctpolym.2018.07.017

 

2017
ZengJ.X.ZhangZ.DongZ.H.RenP.F.LiY.LiuX.
Fabrication and characterization of an ion-imprinted membrane via blending poly(methyl methacrylate-co-2-hydroxyethyl methacrylate) with polyvinylidene fluoride for selective adsorption of Ru(III)
Reactive and Functional Polymers115 , 1-9.
DOI: 10.1016/j.reactfunctpolym.2017.03.018

 

2017
WangZ.H.QiuT.GuoL.H.YeJ.HeL.F.LiX.Y.
The synthesis of hydrophilic molecularly imprinted polymer microspheres and their application for selective removal of bisphenol A from water
Reactive and Functional Polymers116 , 69-76.
DOI: 10.1016/j.reactfunctpolym.2017.04.015

 

2017
TrzonkowskaL.LesniewskaB.Godlewska-ZylkiewiczB.
Studies on the effect of functional monomer and porogen on the properties of ion imprinted polymers based on Cr(III)-110-phenanthroline complex designed for selective removal of Cr(III) ions
Reactive and Functional Polymers117 , 131-139.
DOI: 10.1016/j.reactfunctpolym.2017.04.006

 

2017
Hashemi-MoghaddamH.ZavarehS.KarimpourS.MadanchiH.
Evaluation of molecularly imprinted polymer based on HER2 epitope for targeted drug delivery in ovarian cancer mouse model
Reactive and Functional Polymers121 , 82-90.
DOI: 10.1016/j.reactfunctpolym.2017.10.025

 

2017
FerreiraV.R.A.AzenhaM.A.PereiraC.M.SilvaA.F.
Preparation and evaluation of Pb(II)-imprinted fucoidan-based sorbents
Reactive and Functional Polymers115 , 53-62.
DOI: 10.1016/j.reactfunctpolym.2017.04.001

 

2017
BitarM.RoudautG.MaaloulyJ.BrandèsS.GougeonR.D.CayotP.Bou-MarounE.
Water sorption isotherms of molecularly imprinted polymers. Relation between water binding and iprodione binding capacity
Reactive and Functional Polymers114 , 1-7.
DOI: 10.1016/j.reactfunctpolym.2017.02.012

 

2016
WongA.de OliveiraF.M.TarleyC.R.T.Del Pilar Taboada SotomayorM.
Study on the cross-linked molecularly imprinted poly(methacrylic acid) and poly(acrylic acid) towards selective adsorption of diuron
Reactive and Functional Polymers100 , 26-36.
DOI: 10.1016/j.reactfunctpolym.2016.01.006

 

2016
PolyakovaI.BorovikovaL.OsipenkoA.VlasovaE.VolchekB.PisarevO.
Surface molecularly imprinted organic-inorganic polymers having affinity sites for cholesterol
Reactive and Functional Polymers109 , 88-98.
DOI: 10.1016/j.reactfunctpolym.2016.10.010

 

2016
OliveiraD.GomesC.P.DiasR.C.S.CostaM.R.P.F.
Molecular imprinting of 5-fluorouracil in particles with surface RAFT grafted functional brushes
Reactive and Functional Polymers107 , 35-45.
DOI: 10.1016/j.reactfunctpolym.2016.08.007

 

2016
MadikizelaL.M.MdluliP.S.ChimukaL.
Experimental and theoretical study of molecular interactions between 2-vinyl pyridine and acidic pharmaceuticals used as multi-template molecules in molecularly imprinted polymer
Reactive and Functional Polymers103 , 33-43.
DOI: 10.1016/j.reactfunctpolym.2016.03.017

 

2016
LinZ.Z.ZhangH.Y.LiL.HuangZ.Y.
Application of magnetic molecularly imprinted polymers in the detection of malachite green in fish samples
Reactive and Functional Polymers98 , 24-30.
DOI: 10.1016/j.reactfunctpolym.2015.11.002

 

2016
LeshchinskayaA.P.EzhovaN.M.PisarevO.A.
Synthesis and characterization of 2-hydroxyethyl methacrylate-ethylene glycol dimethacrylate polymeric granules intended for selective removal of uric acid
Reactive and Functional Polymers102 , 101-109.
DOI: 10.1016/j.reactfunctpolym.2016.02.014

 

2016
HussainS.KhanS.GulS.PividoriM.I.Del Pilar Taboada SotomayorM.
A novel core@shell magnetic molecular imprinted nanoparticles for selective determination of folic acid in different food samples
Reactive and Functional Polymers106 , 51-56.
DOI: 10.1016/j.reactfunctpolym.2016.07.011

 

2016
DursunE.M.ÜzekR.BereliN.SenelS.DenizliA.
Synthesis of novel monolithic cartridges with specific recognition sites for extraction of melamine
Reactive and Functional Polymers109 , 33-41.
DOI: 10.1016/j.reactfunctpolym.2016.09.002

 

2015
ZhaoK.Y.ChenT.LinB.B.CuiW.K.KanB.H.YangN.ZhouX.Y.ZhangX.X.WeiJ.F.
Adsorption and recognition of protein molecular imprinted calcium alginate/polyacrylamide hydrogel film with good regeneration performance and high toughness
Reactive and Functional Polymers87 , 7-14.
DOI: 10.1016/j.reactfunctpolym.2014.12.001

 

2015
SzékelyG.ValtchevaI.B.KimJ.F.LivingstonA.G.
Molecularly imprinted organic solvent nanofiltration membranes - Revealing molecular recognition and solute rejection behaviour
Reactive and Functional Polymers86 , 215-224.
DOI: 10.1016/j.reactfunctpolym.2014.03.008

 

2015
MartinsN.CarreiroE.P.SimõesM.CabritaM.J.BurkeA.J.GarciaR.
An emerging approach for the targeting analysis of dimethoate in olive oil: The role of molecularly imprinted polymers based on photo-iniferter induced "living" radical polymerization
Reactive and Functional Polymers86 , 37-46.
DOI: 10.1016/j.reactfunctpolym.2014.11.003

 

2015
LiJ.HuX.L.GuanP.SongR.Y.ZhangX.R.TangY.M.WangC.L.QianL.W.
Preparation of Core-Shell Structural Surface Molecular Imprinting Microspheres and Recognition of L-Asparagine Based on [N1111]Asn Ionic Liquid as Template
Reactive and Functional Polymers88 , 8-15.
DOI: 10.1016/j.reactfunctpolym.2015.01.002

 

2015
LatorreA.L.Cela PérezM.C.Fernández FernándezS.López VilariñoJ.M.González RodríguezM.V.
Selective removal of ATP degradation products from food matrices I: Design and characterization of a dummy molecularly imprinted specific sorbent for hypoxanthine
Reactive and Functional Polymers91-92 , 51-61.
DOI: 10.1016/j.reactfunctpolym.2015.04.004

 

2015
BitarM.MaaloulyJ.ChebibH.LerbretA.CayotP.Bou-MarounE.
Experimental design approach in the synthesis of molecularly imprinted polymers specific for iprodione fungicide
Reactive and Functional Polymers94 , 17-24.
DOI: 10.1016/j.reactfunctpolym.2015.07.002

 

2014
SalianV.D.WhiteC.J.ByrneM.E.
Molecularly imprinted polymers via living radical polymerization: Relating increased structural homogeneity to improved template binding parameters
Reactive and Functional Polymers78 , 38-46.
DOI: 10.1016/j.reactfunctpolym.2014.02.003

 

2014
OgunlajaA.S.CoombesM.J.TortoN.TshentuZ.R.
The adsorptive extraction of oxidized sulfur-containing compounds from fuels by using molecularly imprinted chitosan materials
Reactive and Functional Polymers81 , 61-76.
DOI: 10.1016/j.reactfunctpolym.2014.04.006

 

2014
GerminianoT.O.CorazzaM.Z.SegatelliM.G.RibeiroE.S.YabeM.J.S.GaluninE.TarleyC.R.T.
Synthesis of novel copper ion-selective material based on hierarchically imprinted cross-linked poly(acrylamide-co-ethylene glycol dimethacrylate)
Reactive and Functional Polymers82 , 72-80.
DOI: 10.1016/j.reactfunctpolym.2014.05.012

 

2014
da MataK.CorazzaM.Z.de OliveiraF.M.de ToffoliA.L.TarleyC.R.T.MoreiraA.B.
Synthesis and characterization of cross-linked molecularly imprinted polyacrylamide for the extraction/preconcentration of glyphosate and aminomethylphosphonic acid from water samples
Reactive and Functional Polymers83 , 76-83.
DOI: 10.1016/j.reactfunctpolym.2014.07.004

 

2013
XieJ.Q.CaiC.Q.LaiS.Z.YangL.LuoL.YangH.ChenY.ChenX.M.
Synthesis and application of a molecularly imprinted polymer as a filter to reduce polycyclic aromatic hydrocarbon levels in mainstream cigarette smoke
Reactive and Functional Polymers73 (12), 1606-1611.
DOI: 10.1016/j.reactfunctpolym.2013.09.003

 

2013
Recillas MotaJ.J.Bernad BernadM.J.Mayoral-MurilloJ.A.Gracia MoraJ.
Synthesis and characterization of molecularly imprinted polymers with metallic zinc center for enrofloxacin recognition
Reactive and Functional Polymers73 (8), 1078-1085.
DOI: 10.1016/j.reactfunctpolym.2013.04.002

 

2013
PanahiH.A.MehramiziA.HosseinifardZ.MoniriE.
Synthesis and characterization of new molecular imprinting poly[1-(NN-bis-carboxymethyl)amino-3-allylglycerol-co-dimethylacrylamide] for selective sorption and determination of cefuroxime sodium in biological and pharmaceutical samples
Reactive and Functional Polymers73 (1), 132-140.
DOI: 10.1016/j.reactfunctpolym.2012.08.021

 

2013
KimM.JiangY.KimD.
Zn2+-imprinted porous polymer beads: Synthesisstructureand selective adsorption behavior for template ion
Reactive and Functional Polymers73 (6), 821-827.
DOI: 10.1016/j.reactfunctpolym.2013.03.012

 

2013
KébirN.SabathiéN.Fournier-NoëlC.Fery-ForguesS.LahitteJ.F.RémigyJ.C.
Chemically modified polysulfones for molecular imprinting. Synthesis and complexation with a fluorescent model template
Reactive and Functional Polymers73 (3), 531-539.
DOI: 10.1016/j.reactfunctpolym.2012.12.003

 

2013
EbrahimzadehH.BehbahaniM.YaminiY.AdlnasabL.AsgharinezhadA.A.
Optimization of Cu(II)-ion imprinted nanoparticles for trace monitoring of copper in water and fish samples using a Box-Behnken design
Reactive and Functional Polymers73 (1), 23-29.
DOI: 10.1016/j.reactfunctpolym.2012.10.006

 

2013
DimaS.O.MeoucheW.DobreT.NicolescuT.V.SarbuA.
Diosgenin-selective molecularly imprinted pearls prepared by wet phase inversion
Reactive and Functional Polymers73 (9), 1188-1197.
DOI: 10.1016/j.reactfunctpolym.2013.05.014

 

2013
BrangerC.MeoucheW.MargaillanA.
Recent advances on ion-imprinted polymers
Reactive and Functional Polymers73 (6), 859-875.
DOI: 10.1016/j.reactfunctpolym.2013.03.021

 

2013
BaggianiC.BiagioliF.AnfossiL.GiovannoliC.PassiniC.GiraudiG.
Effect of the mimic structure on the molecular recognition properties of molecularly imprinted polymers for ochratoxin A prepared by a fragmental approach
Reactive and Functional Polymers73 (6), 833-837.
DOI: 10.1016/j.reactfunctpolym.2013.03.018

 

2013
AsliyuceS.UzunL.SayR.DenizliA.
Immunoglobulin G recognition with Fab fragments imprinted monolithic cryogels: Evaluation of the effects of metal-ion assisted-coordination of template molecule
Reactive and Functional Polymers73 (6), 813-820.
DOI: 10.1016/j.reactfunctpolym.2013.03.009

 

2013
AnirudhanT.S.DivyaP.L.NimaJ.
Silylated montmorillonite based molecularly imprinted polymer for the selective binding and controlled release of thiamine hydrochloride
Reactive and Functional Polymers73 (8), 1144-1155.
DOI: 10.1016/j.reactfunctpolym.2013.05.004

 

2013
AnF.Q.GaoB.J.HuangX.W.ZhangY.Q.LiY.B.XuY.ZhangZ.G.GaoJ.F.ChenZ.P.
Selectively removal of Al(III) from Pr(III) and Nd(III) rare earth solution using surface imprinted polymer
Reactive and Functional Polymers73 (1), 60-65.
DOI: 10.1016/j.reactfunctpolym.2012.08.022

 

2013
AhamedM.E.H.MbiandaX.Y.Mulaba-BafubiandiA.F.MarjanovicL.
Ion imprinted polymers for the selective extraction of silver(I) ions in aqueous media: Kinetic modeling and isotherm studies
Reactive and Functional Polymers73 (3), 474-483.
DOI: 10.1016/j.reactfunctpolym.2012.11.011

 

2013
AbediH.EbrahimzadehH.
Imprinted polymer-based extraction for speciation analysis of inorganic tin in food and water samples
Reactive and Functional Polymers73 (4), 634-640.
DOI: 10.1016/j.reactfunctpolym.2013.01.011

 

2012
XiaoP.DudalY.CorviniP.F.X.SpahrP.ShahgaldianP.
Synthesis and characterization of fluoroquinolone-imprinted polymeric nanoparticles
Reactive and Functional Polymers72 (4), 287-293.
DOI: 10.1016/j.reactfunctpolym.2012.02.006

 

2012
TarleyC.R.T.AndradeF.N.de SantanaH.ZaiaD.A.M.BeijoL.A.SegatelliM.G.
Ion-imprinted polyvinylimidazole-silica hybrid copolymer for selective extraction of Pb(II): Characterization and metal adsorption kinetic and thermodynamic studies
Reactive and Functional Polymers72 (1), 83-91.
DOI: 10.1016/j.reactfunctpolym.2011.10.008

 

2012
HrdinaA.LaiE.LiC.S.SadiB.KramerG.H.
Synthesis of crown ether modified cation exchange polymer particles for 90Sr urinalysis
Reactive and Functional Polymers72 (5), 295-302.
DOI: 10.1016/j.reactfunctpolym.2012.03.003

 

2011
ShamsipurM.Besharati-SeidaniA.
Synthesis of a novel nanostructured ion-imprinted polymer for very fast and highly selective recognition of copper(II) ions in aqueous media
Reactive and Functional Polymers71 (2), 131-139.
DOI: 10.1016/j.reactfunctpolym.2010.11.002

 

2011
GuoL.Q.ZengY.B.GuanA.H.ChenG.N.
Preparation and characterization of molecularly imprinted silica particles for selective adsorption of naphthalene
Reactive and Functional Polymers71 (12), 1172-1176.
DOI: 10.1016/j.reactfunctpolym.2011.08.005

 

2011
Gómez-PinedaL.E.Pina-LuisG.E.CuánÁ.García-CalzónJ.A.Díaz-GarcíaM.E.
Physico-chemical characterization of flavonol molecularly imprinted polymers
Reactive and Functional Polymers71 (4), 402-408.
DOI: 10.1016/j.reactfunctpolym.2010.12.013

 

2011
FasihiJ.Ammari AlahyariS.ShamsipurM.SharghiH.CharkhiA.
Adsorption of uranyl ion onto an anthraquinone based ion-imprinted copolymer
Reactive and Functional Polymers71 (8), 803-808.
DOI: 10.1016/j.reactfunctpolym.2011.03.014

 

2010
SegatelliM.G.SantosV.S.PresottoA.B.T.YoshidaI.V.P.TarleyC.R.T.
Cadmium ion-selective sorbent preconcentration method using ion imprinted poly(ethylene glycol dimethacrylate-co-vinylimidazole)
Reactive and Functional Polymers70 (6), 325-333.
DOI: 10.1016/j.reactfunctpolym.2010.02.006

 

2010
SamatyaS.MizukiH.ItoY.KawakitaH.UezuK.
The effect of polystyrene as a porogen on the fluoride ion adsorption of Zr(IV) surface-immobilized resin
Reactive and Functional Polymers70 (1), 63-68.
DOI: 10.1016/j.reactfunctpolym.2009.10.004

 

2010
PustamA.N.AlexandratosS.D.
Engineering selectivity into polymer-supported reagents for transition metal ion complex formation
Reactive and Functional Polymers70 (8), 545-554.
DOI: 10.1016/j.reactfunctpolym.2010.05.002

 

2010
ErdemM.SayR.I.ErsözA.DenizliA.TürkH.
Biomimickingmetal-chelating and surface-imprinted polymers for the degradation of pesticides
Reactive and Functional Polymers70 (4), 238-243.
DOI: 10.1016/j.reactfunctpolym.2009.12.005

 

2009
XueX.H.PanJ.XieH.M.WangJ.H.ZhangS.
Specific recognition of staphylococcus aureus by staphylococcus aureus protein A-imprinted polymers
Reactive and Functional Polymers69 (3), 159-164.
DOI: 10.1016/j.reactfunctpolym.2008.12.013

 

2009
LeeJ.BernardS.LiuX.C.
Nanostructured biomimetic catalysts for asymmetric hydrogenation of enamides using molecular imprinting technology
Reactive and Functional Polymers69 (9), 650-654.
DOI: 10.1016/j.reactfunctpolym.2009.04.006

 

2009
ÇimenD.AkbulutE.DemirelG.CaykaraT.
Molecularly imprinted hydrogels for fibrinogen recognition
Reactive and Functional Polymers69 (9), 655-659.
DOI: 10.1016/j.reactfunctpolym.2009.04.009

 

2009
BaydemirG.BereliN.AndaçM.SayR.GalaevI.Y.DenizliA.
Supermacroporous poly(hydroxyethyl methacrylate) based cryogel with embedded bilirubin imprinted particles
Reactive and Functional Polymers69 (1), 36-42.
DOI: 10.1016/j.reactfunctpolym.2008.10.007

 

2008
ZhaoK.Y.ChengG.X.HuangJ.J.YingX.G.
Rebinding and recognition properties of protein-macromolecularly imprinted calcium phosphate/alginate hybrid polymer microspheres
Reactive and Functional Polymers68 (3), 732-741.
DOI: 10.1016/j.reactfunctpolym.2007.11.011

 

2008
ZhaiY.H.LiuY.W.ChangX.J.RuanX.F.LiuJ.L.
Metal ion-small molecule complex imprinted polymer membranes: Preparation and separation characteristics
Reactive and Functional Polymers68 (1), 284-291.
DOI: 10.1016/j.reactfunctpolym.2007.08.013

 

2008
XiaY.Q.GuoT.Y.SongM.D.ZhangB.H.ZhangB.L.
Adsorption dynamics and thermodynamics of Hb on the Hb-imprinted polymer beads
Reactive and Functional Polymers68 (1), 63-69.
DOI: 10.1016/j.reactfunctpolym.2007.10.018

 

2008
WangH.F.LiW.Y.HeX.W.ChenL.X.ZhangY.K.
m-Aminophenylboronic acid as a functional monomer for fabricating molecularly imprinted polymer for the recognition of bovine serum albumin
Reactive and Functional Polymers68 (9), 1291-1296.
DOI: 10.1016/j.reactfunctpolym.2008.06.002

 

2008
TokuyamaH.NaoharaS.SakoharaS.
Preparation of molecular imprinted thermosensitive gels grafted onto polypropylene by plasma-initiated graft polymerization
Reactive and Functional Polymers68 (1), 182-188.
DOI: 10.1016/j.reactfunctpolym.2007.09.010

 

2008
DhakalR.P.OshimaT.BabaY.
Planarity-recognition enhancement of N-(2-pyridylmethyl)chitosan by imprinting planar metal ions
Reactive and Functional Polymers68 (11), 1549-1556.
DOI: 10.1016/j.reactfunctpolym.2008.08.008

 

2007
SreenivasanK.
Synthesis and evaluation of molecularly imprinted polymers for nucleic acid bases using aniline as a monomer
Reactive and Functional Polymers67 (10), 859-864.
DOI: 10.1016/j.reactfunctpolym.2007.05.017

 

2007
SadeghiS.MofradA.A.
Synthesis of a new ion imprinted polymer material for separation and preconcentration of traces of uranyl ions
Reactive and Functional Polymers67 (10), 966-976.
DOI: 10.1016/j.reactfunctpolym.2007.05.020

 

2007
FuG.Q.ZhaoJ.C.YuH.LiuL.HeB.L.
Bovine serum albumin-imprinted polymer gels prepared by graft copolymerization of acrylamide on chitosan
Reactive and Functional Polymers67 (5), 442-450.
DOI: 10.1016/j.reactfunctpolym.2007.02.006

 

2006
ZhangF.J.ChengG.X.YingX.G.
Emulsion and macromolecules templated alginate based polymer microspheres
Reactive and Functional Polymers66 (7), 712-719.
DOI: 10.1016/j.reactfunctpolym.2005.10.022

 

2006
YuJ.C.C.LaiE.P.C.
Molecularly imprinted polypyrrole modified carbon nanotubes on stainless steel frit for selective micro solid phase pre-concentration of ochratoxin A
Reactive and Functional Polymers66 (7), 702-711.
DOI: 10.1016/j.reactfunctpolym.2005.10.021

 

2006
YangG.L.LiuH.Y.WangM.M.LiuS.B.ChenY.
Chromatographic characterization and solid-phase extraction on diniconazole-imprinted polymers stationary phase
Reactive and Functional Polymers66 (5), 579-583.
DOI: 10.1016/j.reactfunctpolym.2005.10.029

 

2006
XiaY.Q.GuoT.Y.SongM.D.ZhangB.H.ZhangB.L.
Selective separation of quercetin by molecular imprinting using chitosan beads as functional matrix
Reactive and Functional Polymers66 (12), 1734-1740.
DOI: 10.1016/j.reactfunctpolym.2006.08.001

 

2006
XiF.N.WuJ.M.
Preparation of macroporous chitosan layer coated on silica gel and its application to affinity chromatography for trypsin inhibitor purification
Reactive and Functional Polymers66 (6), 682-688.
DOI: 10.1016/j.reactfunctpolym.2005.10.028

 

2006
WolmanF.J.SmolkoE.E.CasconeO.GrasselliM.
Peptide imprinted polymer synthesized by radiation-induced graft polymerization
Reactive and Functional Polymers66 (11), 1199-1205.
DOI: 10.1016/j.reactfunctpolym.2006.03.002

 

2006
WangH.Y.JiangJ.G.MaL.Y.PangY.L.
Syntheses of molecularly imprinted polymers and their molecular recognition study for benzotriazole
Reactive and Functional Polymers66 (10), 1081-1086.
DOI: 10.1016/j.reactfunctpolym.2006.01.022

 

2006
VolkmannA.BrüggemannO.
Catalysis of an ester hydrolysis applying molecularly imprinted polymer shells based on an immobilised chiral template
Reactive and Functional Polymers66 (12), 1725-1733.
DOI: 10.1016/j.reactfunctpolym.2006.07.007

 

2006
PangX.S.ChengG.X.ZhangY.H.LuS.L.
Soft-wet polyacrylamide gel beads with the imprinting of bovine serum albumin
Reactive and Functional Polymers66 (10), 1182-1188.
DOI: 10.1016/j.reactfunctpolym.2006.03.001

 

2005
YuJ.C.C.LaiE.P.C.
Interaction of ochratoxin A with molecularly imprinted polypyrrole film on surface plasmon resonance sensor
Reactive and Functional Polymers63 (3), 171-176.
DOI: 10.1016/j.reactfunctpolym.2005.03.001

 

2005
WangH.Y.JiangJ.G.MaL.Y.PangY.L.
Syntheses of molecularly imprinted polymers and their molecular recognition study for doxazosin mesylate
Reactive and Functional Polymers64 (2), 119-126.
DOI: 10.1016/j.reactfunctpolym.2005.05.010

 

2003
ZhangL.Y.ChengG.X.FuC.
Synthesis and characteristics of tyrosine imprinted beads via suspension polymerization
Reactive and Functional Polymers56 (3), 167-173.
DOI: 10.1016 /S1381-5148(03)00054-3

 

2003
StrikovskyA.HradilJ.WulffG.
Catalytically activemolecularly imprinted polymers in bead form
Reactive and Functional Polymers54 (1-3), 49-61.
DOI: 10.1016/S1381-5148(02)00182-7

 

2003
PrasadB.B.BanerjeeS.
Preparationcharacterization and performance of a silica gel bonded molecularly imprinted polymer for selective recognition and enrichment of b-lactam antibiotics
Reactive and Functional Polymers55 (2), 159-169.
DOI: 10.1016/S1381-5148(02)00225-0

 

2002
DisalvoD.DellingerD.B.GohdesJ.W.
Catalytic epoxidations of styrene using a manganese functionalized polymer
Reactive and Functional Polymers53 (2-3), 103-112.
DOI: 10.1016/S1381-5148(02)00166-9

 

2001
YeL.MosbachK.
Molecularly imprinted microspheres as antibody binding mimics
Reactive and Functional Polymers48 (1-3), 149-157.
DOI: 10.1016/S1381-5148(01)00050-5

 

2000
SinghA.PuranikD.GuoY.ChangE.I.
Towards achieving selectivity in metal ion binding by fixing ligand-chelator complex geometry in polymers
Reactive and Functional Polymers44 (1), 79-89.
DOI: 10.1016/S1381-5148(99)00082-6

 

1999
YoshikawaM.IzumiJ.KitaoT.
Alternative molecular imprintinga facile way to introduce chiral recognition sites
Reactive and Functional Polymers42 (1), 93-102.
DOI: 10.1016/S1381-5148(98)00063-7

 

1999
LeleB.S.KulkarniM.G.MashelkarR.A.
Molecularly imprinted polymer mimics of chymotrypsin - 1. Cooperative effects and substrate specificity
Reactive and Functional Polymers39 (1), 37-52.
DOI: 10.1016/S1381-5148(97)00177-6

 

1999
LeleB.S.KulkarniM.G.MashelkarR.A.
Molecularly imprinted polymer mimics of chymotrypsin - 2. Functional monomers and hydrolytic activity
Reactive and Functional Polymers40 (3), 215-229.
DOI: 10.1016/S1381-5148(98)00047-9

 

1999
HauptK.
Molecularly imprinted sorbent assays and the use of non-related probes
Reactive and Functional Polymers41 (1-3), 125-131.
DOI: 10.1016/S1381-5148(99)00023-1

 

1999
CormackP.A.G.MosbachK.
Molecular imprinting: recent developments and the road ahead
Reactive and Functional Polymers41 (1-3), 115-124.
DOI: 10.1016/S1381-5148(99)00024-3