MIPs logo MIPdatabase     MIP2018 Conference website
This file last updated: 10/09/2017

Qaddafi M

Qaddafi M et al., Imprinted Nickel-Cobalt Chitosan as a Specific Adsorbent of Nickel (Ni2+) and Cobalt (Co2+).
International Journal ofScientific and Technology Research, 3, (9), 37-42, (2014)
   

Qader AA

Qader AA et al., Peptide imprinted receptors for the determination of the small cell lung cancer associated biomarker progastrin releasing peptide.
Journal of Chromatography A, 1370, 56-62, (2014)
   

Rossetti C et al., Antibody-Free Biomarker Determination: Exploring Molecularly Imprinted Polymers for Pro-Gastrin Releasing Peptide.
Analytical Chemistry, 86, (24), 12291-12298, (2014)
   

Qadri SB

Johnson BJ et al., Imprinted Nanoporous Organosilicas for Selective Adsorption of Nitroenergetic Targets.
Langmuir, 24, (16), 9024-9029, (2008)
   

Qi C

Xiang HY et al., Preparation of resveratrol molecularly imprinted composite membranes and its selectivity to the template.
Chinese Journal of Applied Chemistry, 26, (7), 786-790, (2009)
   

Qi H

Fa HB et al., Study on Synthesis and properties of Molecularly Imprinted Polymeric Microspheres of Metalloporphyrins with Dimethyl Methylphosphonate as template molecule.
Chemical Journal of Chinese Universities, 34, (5), 1160-1165, (2013)
   

Qi HT

Liang P et al., Biosorption of citric acid-cadmium complex by imprinted chitosan polymer.
Desalination and Water Treatment, 51, (19-21), 3754-3761, (2013)
   

Qi J

Qi J et al., Proceeding, A High-Throughput Screening of N-Carbobenzoxy-L-Tryptophan Imprinted Polymers and their Application for Monolithic Chiral Stationary Phase, 
In: Advanced Materials Research, Cui CX, Li YL, Yuan ZH (Eds.), 1525-1528, (2012)
   

Li BW et al., Quantum Dot-Based Molecularly Imprinted Polymers on Three-Dimensional Origami Paper Microfluidic Chip for Fluorescence Detection of Phycocyanin.
ACS Sensors, 2, (2), 243-250, (2017)
   

Qi J et al., Three-dimensional paper-based microfluidic chip device for multiplexed fluorescence detection of Cu2+ and Hg2+ ions based on ion imprinting technology.
Sensors and Actuators B: Chemical, 251, 224-233, (2017)
   

Qi JY

Qi JY et al., Preparation and property of microspheric Fe(III) imprinted polymer.
Material Science and Technology, 15, (6), 767-773, (2007)
   

Qi JY et al., Preparation and property of microspheric Fe(III) imprinted polymer.
Materials Science and Technology, 15, (6), 767-769, 773, (2007)
   

Qi JY et al., Selective removal of Cu(II) from contaminated water using molecularly imprinted polymer.
Frontiers of Chemical Engineering in China, 2, (1), 109-114, (2008)
   

Qi JY et al., Removal of Trace Aniline from Water by Using Molecularly Imprinted Polymers.
China Water & Wastewater, 24, (1), 69-72, (2008)
   

Dong CK et al., Development of a model for the rational design of molecular imprinted polymer: Computational approach for combined molecular dynamics/quantum mechanics calculations.
Analytica Chimica Acta, 647, (1), 117-124, (2009)
   

Li Y et al., Selective recognition and removal of chlorophenols from aqueous solution using molecularly imprinted polymer prepared by reversible addition-fragmentation chain transfer polymerization.
Biosensors and Bioelectronics, 25, (2), 306-312, (2009)
   

Li Y et al., Selective removal of 2, 4-dichlorophenol from contaminated water using non-covalent imprinted microspheres.
Environmental Pollution, 157, (6), 1879-1885, (2009)
   

Li YQ et al., Selective recognition of veterinary drugs residues by artificial antibodies designed using a computational approach.
Biomaterials, 30, (18), 3205-3211, (2009)
   

Liu RG et al., Effective removal of rhodamine B from contaminated water using non-covalent imprinted microspheres designed by computational approach.
Biosensors and Bioelectronics, 25, (3), 629-634, (2009)
   

Chang LM et al., Preparation of core-shell molecularly imprinted polymer via the combination of reversible addition-fragmentation chain transfer polymerization and click reaction.
Analytica Chimica Acta, 680, (1-2), 65-71, (2010)
   

Li Y et al., A graphene oxide-based molecularly imprinted polymer platform for detecting endocrine disrupting chemicals.
Carbon, 48, (12), 3427-3433, (2010)
   

Li Y et al., Synthesis of core-shell magnetic molecular imprinted polymer by the surface RAFT polymerization for the fast and selective removal of endocrine disrupting chemicals from aqueous solutions.
Environmental Pollution, 158, (6), 2317-2323, (2010)
   

Li Y et al., Surface molecular imprinting onto fluorescein-coated magnetic nanoparticles via reversible addition fragmentation chain transfer polymerization: A facile three-in-one system for recognition and separation of endocrine disrupting chemicals.
Nanoscale, 3, (1), 280-287, (2011)
   

Chen SN et al., High performance surface-enhanced Raman scattering via dummy molecular imprinting onto silver microspheres.
Chemical Communications, 50, (92), 14331-14333, (2014)
   

Chen SN et al., A Ag-molecularly imprinted polymer composite for efficient surface-enhanced Raman scattering activities under a low-energy laser.
Analyst, 140, (9), 3239-3243, (2015)
   

Qi KZ

He DX et al., Preparation and Binding Characteristics of Molecularly Imprinted Polymers for Cefotaxime Sodium.
Chinese Journal of Veterinary Drug, 43, (5), 10-13, (2009)
   

Wang XY et al., Determination of enrofloxacin residue in chicken muscle using molecular imprinted solid phase extraction-high performance capillary electrophoresis.
Chinese Journal of Chromatography, 28, (11), 1107-1110, (2010)
   

Chen DD et al., Determination of Cefotaxime Residue in Milk by Molecular Imprinted Solid Phase Extraction/Capillary Electrophoresis.
Journal of Instrumental Analysis, 31, (10), 1334-1338, (2012)
   

Wang XY et al., Detection of cephalosporins residue in chicken muscles by molecular imprinted solid phase extraction-high performance capillary electrophoresis (MISPE-HPCE).
Jiangsu Journal of Agricultural Sciences, 28, (1), 193-197, (2012)
   

Wu J et al., Study on preparation and adsorption properties of lincomycin molecularly imprinted polymers.
Chinese Journal of Analysis Laboratory, 32, (3), 26-29, (2013)
   

Qi L

Li N et al., Novel Oligo(ethylene glycol)-Based Molecularly Imprinted Magnetic Nanoparticles for Thermally Modulated Capture and Release of Lysozyme.
ACS Applied Materials & Interfaces, 6, (19), 17289-17295, (2014)
   

Wu HX et al., Preparation and characterization of temperature response molecularly imprinted membrane with chitosan and methylmethacrylate.
Russian Journal of Applied Chemistry, 89, (2), 293-296, (2016)
   

Qi LH

Hao Y et al., Preparation of Magnetic Chitosan Cu2+ Imprinted Particles and the Adsorption of Cu2+.
Polymer Materials Science and Engineering, 30, (5), 154-158, (2014)
   

Qi LL

Ying XG et al., Stimuli-responsive recognition of BSA-imprinted poly vinyl acetate grafted calcium alginate core-shell hydrogel microspheres.
Journal of Applied Polymer Science, 127, (5), 3898-3909, (2013)
   

Qi N

Qi N et al., Determination of Cyromazine in Cucumber by Molecularly Imprinted Solid Phase Extraction/High Performance Liquid Chromatography.
Journal of Instrumental Analysis, 31, (10), 1248-1253, (2012)
   

Qi N et al., Proceeding, Preparation of Melamine Molecularly Imprinted Polymeric Microspheres by Two-Step Seed Swelling Polymerization, 
In: Advanced Materials Research, Batisdas DM, Chang YQ (Eds.), 128-131, (2013)
   

Zhang YJ et al., Synthesis and Evaluation of Cyromazine Molecularly Imprinted Polymeric Microspheres by Two-Step Seed Swelling Polymerization.
Asian Journal of Chemistry, 25, (15), 8329-8332, (2013)
   

Qi P

Qi P et al., Impedimetric biosensor based on cell-mediated bioimprinted films for bacterial detection.
Biosensors and Bioelectronics, 39, (1), 282-288, (2013)
   

Qi PP

Qi PP et al., Molecularly imprinted polymers synthesized via semi-covalent imprinting with sacrificial spacer for imprinting phenols.
Polymer, 51, (23), 5417-5423, (2010)
   

Qi PP et al., 2, 4-Dimethylphenol imprinted polymers as a solid-phase extraction sorbent for class-selective extraction of phenolic compounds from environmental water.
Talanta, 81, (4-5), 1630-1635, (2010)
   

Qi PP et al., Molecularly imprinted solid-phase extraction coupled with HPLC for the selective determination of monobutyl phthalate in bottled water.
Journal of Separation Science, 34, (19), 2712-2718, (2011)
   

Qi PP et al., Computer-assisted design and synthesis of molecularly imprinted polymers for the simultaneous determination of six carbamate pesticides from environmental water.
Journal of Separation Science, 37, (20), 2955-2965, (2014)
   

Qi RX

Deng F et al., Sol-hydrothermal synthesis of inorganic-framework molecularly imprinted TiO2/SiO2 nanocomposite and its preferential photocatalytic degradation towards target contaminant.
Journal of Hazardous Materials, 278, 108-115, (2014)
   

Luo XB et al., Synthesis of magnetic ion-imprinted fluorescent CdTe quantum dots by chemical etching and their visualization application for selective removal of Cd(II) from water.
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 462, 186-193, (2014)
   

Qi SD

Qi SD et al., Off-line hyphenation of molecularly imprinted magnetic nanoparticle-based extraction with large volume sample stacking capillary electrophoresis for high-sensitivity detection of trace chloro-phenols.
Analytical Methods, 6, (4), 1219-1226, (2014)
   

Qi W

Wang MF et al., Advances in Cross-Linked Enzyme Aggregates.
Progress In Chemistry, 22, (1), 173-178, (2010)
   

Wang YH et al., Preparation and Application of Atrazine Molecularly Imprinted Solid Phase Extraction Pillar.
Chinese Journal of Analytical Chemistry, 38, (5), 678-682, (2010)
   

Lan XB et al., Preparation of Molecular Imprinted Photonic Crystal Sensor and Its Application in Determination of Phthalate Esters.
Chinese Journal of Analytical Chemistry, 43, (4), 471-478, (2015)
   

Wang MF et al., Enhancing the Activity of Peptide-Based Artificial Hydrolase with Catalytic Ser/His/Asp Triad and Molecular Imprinting.
ACS Applied Materials & Interfaces, 8, (22), 14133-14141, (2016)
   

Wei XB et al., Molecularly imprinted polymer/graphene oxide modified glassy carbon electrode for selective detection of sulfanilamide.
Progress in Natural Science: Materials International, 27, (3), 374-379, (2017)
   

Qi WJ

Qi WJ et al., A Molecular Imprinting Electrochemical Sensor for L-Tryptophan Determination.
Journal of Analytical Science, 27, (3), 331-335, (2011)
   

Zhang YG et al., Determination of melamine based on a sol-gel molecular imprinting technique.
Chinese Journal of Analysis Laboratory, 30, (2), 21-24, (2011)
   

Li HD et al., An amperometric sensor for the determination of benzophenone in food packaging materials based on the electropolymerized molecularly imprinted poly-o-phenylenediamine film.
Talanta, 99, 811-815, (2012)
   

Qi X

Qi X et al., Synthesis of surface Cr (VI)-imprinted magnetic nanoparticles for selective dispersive solid-phase extraction and determination of Cr (VI) in water samples.
Talanta, 162, 345-353, (2017)
   

Qi XL

Li YH et al., Development of a group selective molecularly imprinted polymers based solid phase extraction of malachite green from fish water and fish feed samples.
Analytica Chimica Acta, 624, (2), 317-325, (2008)
   

Li YH et al., Development of a group selective molecularly imprinted polymers based solid phase extraction of malachite green.
Chemical Research and Application, 20, (9), 1163-1165, (2008)
   

Qi XL et al., The synthetic methods and application of molecularly printed polymers.
Chemical Research and Application, 21, (4), 441-449, (2009)
   

Qi XL et al., Development of a broad selective molecularly imprinted polymers-based solid phase extraction of contraceptive drug levonorgestrel from water samples.
International Journal of Environmental Analytical Chemistry, 92, (3), 268-278, (2012)
   

Qi XY

Wu Y et al., Preparation and characterization of mesoporous silica SBA-15-supported molecularly caffeine-imprinted polymers by surface molecularly imprinting technique.
Journal of Jiangsu University (Medicine Edition), 22, (2), 151-154, (2012)
   

Ge YR et al., Preparation and Evaluation of Florfenicol Imprinted Polymers by Using Nano-Titanium Dioxide.
Asian Journal of Chemistry, 25, (16), 9105-9109, (2013)
   

Ou HX et al., Selective Removal of Erythromycin by Magnetic Imprinted Polymers Synthesized from Chitosan-Stabilized Pickering Emulsion.
Journal of Hazardous Materials, 289, 28-37, (2015)
   

Xu LN et al., Recent advances in applications of nanomaterials for sample preparation.
Talanta, 146, 714-726, (2016)
   

Qi Y

Zhou JF et al., Preparation, evaluation and application of molecularly imprinted solid-phase microextraction monolith for selective extraction of pirimicarb in tomato and pear.
Journal of Chromatography A, 1217, (48), 7478-7483, (2010)
   

Fang GZ et al., Development and application of molecularly imprinted quartz crystal microbalance sensor for rapid detection of metolcarb in foods.
Sensors and Actuators B: Chemical, 251, 720-728, (2017)
   

Qi YB

Qi YB et al., A Salbutamol Sensor Based on Carbon Nanotubes Modified Electrode and Molecularly Imprinted Polymers.
Chinese Journal of Analytical Chemistry, 39, (7), 1053-1057, (2011)
   

Ding ZY et al., Determination of clenbuterol with multi-walled carbon nanotubes-molecular imprinted sensors.
Chinese Journal of Analysis Laboratory, 31, (9), 121-124, (2012)
   

Qi YT

Qi YT et al., A novel artificial metallocyclodextrins polymer: Synthesis and photoactive properties in imprinting of molecular recognition.
Inorganic Chemistry Communications, 70, 22-26, (2016)
   

Qi YX

Yu DJ et al., A novel electrochemical sensor for determination of dopamine based on AuNPs@SiO2 core-shell imprinted composite.
Biosensors and Bioelectronics, 38, (1), 270-277, (2012)
   

Qi YX et al., Preparation and applications of 4-methyl imidazole magnetic surface molecularly imprinted polymers.
Chinese Journal of Chromatography, 33, (12), 1234-1241, (2015)
   

Qi YX et al., Preparation of Magnetic Molecularly Imprinted Polymer for Melamine and its Application in Milk Sample Analysis by HPLC.
Journal of Biomedical Sciences, 5, (2), ArticleNo15-(2016)
   

Zhao LJ et al., Preparation and Recognition Characters of Gatifloxacin Magnetic Surface Molecularly Imprinted Polymers.
Chinese Journal of Analytical Chemistry, 44, (10), 1562-1567, (2016)
   

Qi ZY

Zhang LL et al., Imprinted-like biopolymeric micelles as efficient nanovehicles for curcumin delivery.
Colloids and Surfaces B: Biointerfaces, 123, 15-22, (2014)
   

Qian BS

Zhao CS et al., BPA transfer rate increase using molecular imprinted polyethersulfone hollow fiber membrane.
Journal of Membrane Science, 310, (1-2), 38-43, (2008)
   

Qian CT

Zhang YN et al., Preparation of cinchonine molecularly imprinted photonic crystal film and its specific recognition and optical responsive properties.
Journal of Applied Polymer Science, 133, (11), ArticleNo43191-(2016)
   

Qian D

Xiao N et al., Carbon paste electrode modified with duplex molecularly imprinted polymer hybrid film for metronidazole detection.
Biosensors and Bioelectronics, 81, 54-60, (2016)
   

Xie J et al., Computational design and fabrication of core-shell magnetic molecularly imprinted polymer for dispersive micro-solid-phase extraction coupled with high-performance liquid chromatography for the determination of rhodamine 6G.
Journal of Separation Science, 39, (12), 2422-2430, (2016)
   

Li JH et al., Ag/N-doped reduced graphene oxide incorporated with molecularly imprinted polymer: An advanced electrochemical sensing platform for salbutamol determination.
Biosensors and Bioelectronics, 90, 210-216, (2017)
   

Wang HJ et al., A highly sensitive and selective sensor based on a graphene-coated carbon paste electrode modified with a computationally designed boron-embedded duplex molecularly imprinted hybrid membrane for the sensing of lamotrigine.
Biosensors and Bioelectronics, 94, 663-670, (2017)
   

Wang HJ et al., Enantioselective determination of S-ornidazole by using carbon paste electrode modified with boron-embedded conductive copolymer-polysiloxane-based molecularly imprinted hybrid film.
Electrochimica Acta, 246, 338-347, (2017)
   

Qian GL

Zhang Y et al., Synthesis and Evaluation of Carbofuran Molecularly Imprinted Polymer.
Journal of Instrumental Analysis, 29, (10), 993-998, (2010)
   

Qian H

Sun XL et al., Development and Application of 3-Chloro-1, 2-propandiol Electrochemical Sensor Based on a Polyaminothiophenol Modified Molecularly Imprinted Film.
Journal of Agricultural and Food Chemistry, 62, (20), 4552-4557, (2014)
   

Xie YF et al., Selective detection of chloramphenicol in milk based on a molecularly imprinted polymer-surface-enhanced Raman spectroscopic nanosensor.
Journal of Raman Spectroscopy, 48, (2), 204-210, (2017)
   

Qian HL

Yang YK et al., Sensitive and selective electrochemical determination of quinoxaline-2-carboxylic acid based on bilayer of novel poly(pyrrole) functional composite using one-step electro-polymerization and molecularly imprinted poly(o-phenylenediamine).
Analytica Chimica Acta, 806, 136-143, (2014)
   

Qian J

Hong JM et al., Selectively-permeable ultrathin film composite membranes based on molecularly-imprinted polymers.
Chemistry of Materials, 10, (4), 1029-1033, (1998)
   

Qian J et al., Synthesis of surface ion-imprinted magnetic microspheres by locating polymerization for rapid and selective separation of uranium(VI).
RSC Advances, 5, (6), 4153-4161, (2015)
   

Yang S et al., Ion-Imprinted Mesoporous Silica for Selective Removal of Uranium from Highly Acidic and Radioactive Effluent.
ACS Applied Materials & Interfaces, 9, (34), 29337-29344, (2017)
   

Zhang LX et al., Surface Ion-Imprinted Polypropylene Nonwoven Fabric for Potential Uranium Seawater Extraction with High Selectivity over Vanadium.
Industrial & Engineering Chemistry Research, 56, (7), 1860-1867, (2017)
   

Qian JC

Zhang SL et al., Book chapter, Bioreactors and Bioseparation, 
In: Biotechnology in China II, Tsao GT, Ouyang PK, Chen JA (Eds.) Springer: Heidelberg, 105-150, (2010)
   

Qian JJ

Schirhagl R et al., Immunosensing with artificial antibodies in organic solvents or complex matrices.
Sensors and Actuators B: Chemical, 173, 585-590, (2012)
   

Latif U et al., Biomimetic Receptors for Bioanalyte Detection by Quartz Crystal Microbalances - From Molecules to Cells.
Sensors, 14, (12), 23419-23438, (2014)
   

Qian K

Qian K et al., Preparation and application of a molecularly imprinted polymer for the determination of trace metolcarb in food matrices by high performance liquid chromatography.
Journal of Separation Science, 33, (14), 2079-2085, (2010)
   

Pan MF et al., Novel amperometric sensor using metolcarb-imprinted film as the recognition element on a gold electrode and its application.
Analytica Chimica Acta, 690, (2), 175-181, (2011)
   

Qian K et al., A novel core-shell molecularly imprinted polymer based on metal-organic frameworks as a matrix.
Chemical Communications, 47, (36), 10118-10120, (2011)
   

Kong LJ et al., An electrochemical sensor for rapid determination of ractopamine based on a molecularly imprinted electrosynthesized o-aminothiophenol film.
Analytical and Bioanalytical Chemistry, 404, (6), 1653-1660, (2012)
   

Qian K et al., Highly sensitive and selective novel core-shell molecularly imprinted polymer based on NaYF4: Yb3+, Er3+ upconversion fluorescent nanorods.
RSC Advances, 3, (12), 3825-3828, (2013)
   

Tang YW et al., Rapid Determination of Metolcarb Residues in Foods Using a Biomimetic Enzyme-Linked Immunosorbent Assay Employing a Novel Molecularly Imprinted Polymer Film as Artificial Antibody.
Journal of AOAC International, 96, (2), 453-458, (2013)
   

Qian K et al., Metal-organic frameworks supported surface-imprinted nanoparticles for the sensitive detection of metolcarb.
Biosensors and Bioelectronics, 79, 359-363, (2016)
   

Qian LL

Zhang Y et al., A dual read-out molecularly imprinted composite membrane sensor based on zinc porphyrin for the detection of dimethyl methylphosphonate.
Chemical Research in Chinese Universities, 32, (5), 725-730, (2016)
   

Qian LW

Qian LW et al., Thermal preparation of lysozyme-imprinted microspheres by using ionic liquid as a stabilizer.
Analytical and Bioanalytical Chemistry, 406, (28), 7221-7231, (2014)
   

Qian LW et al., Preparation of bovine serum albumin imprinting sensitive hydrogels using ionic liquid as co-monomer and stabilizer.
Talanta, 121, 56-64, (2014)
   

Wang CL et al., Thymopentin Magnetic Molecularly Imprinted Polymers with Room Temperature Ionic Liquids as a Functional Monomer by Surface-Initiated ATRP.
International Journal of Polymer Analysis and Characterization, 19, (1), 70-82, (2014)
   

Du CB et al., Synthesis of water-compatible surface-imprinted composite microspheres with core-shell structure for selective recognition of thymopentin from aqueous solution.
Journal of Materials Science, 50, (1), 427-438, (2015)
   

Du CB et al., Water-compatible surface-imprinted microspheres for high adsorption and selective recognition of peptide drug from aqueous media.
Journal of Materials Chemistry B, 3, (15), 3044-3053, (2015)
   

Gao B et al., The performance optimization and specific adsorption of L-phenylalanine imprinted polymers using 1-vinyl-3-carboxymethylimidazolium chloride as functional monomer.
Designed Monomers and Polymers, 18, (3), 185-198, (2015)
   

Li J et al., Preparation of "dummy" l-phenylalanine molecularly imprinted microspheres by using ionic liquid as a template and functional monomer.
Journal of Separation Science, 38, (18), 3279-3287, (2015)
   

Li J et al., Preparation of molecularly imprinted polymers using ion-pair dummy template imprinting and polymerizable ionic liquids.
RSC Advances, 5, (77), 62697-62705, (2015)
   

Li J et al., Preparation of Core-Shell Structural Surface Molecular Imprinting Microspheres and Recognition of L-Asparagine Based on [N1111]Asn Ionic Liquid as Template.
Reactive and Functional Polymers, 88, 8-15, (2015)
   

Qian LW et al., An effective way to imprint protein with the preservation of template structure by using a macromolecule as the functional monomer.
RSC Advances, 5, (73), 59062-59069, (2015)
   

Qian LW et al., The effectively specific recognition of bovine serum albumin imprinted silica nanoparticles by utilizing a macromolecularly functional monomer to stabilize and imprint template.
Analytica Chimica Acta, 884, 97-105, (2015)
   

Song RY et al., Synthesis of porous molecularly imprinted polymers for selective adsorption of glutathione.
Applied Surface Science, 332, 159-166, (2015)
   

Song RY et al., Synthesis of glutathione imprinted polymer particles via controlled living radical precipitation polymerization.
Chinese Journal of Polymer Science, 33, (3), 404-415, (2015)
   

Wang CL et al., Lysozyme Molecular Imprinted Membranes with Ionic Liquids as Functional Monomer.
Acta Polymerica Sinica, (3), 259-265, (2015)
   

Wang CL et al., Separation and purification of thymopentin with molecular imprinting membrane by solid phase extraction disks.
Journal of Pharmaceutical and Biomedical Analysis, 102, 137-143, (2015)
   

Wang CL et al., Molecular Simulation and Synthesis of Magnetic Molecularly Imprinted Polymer for Recognition of Thymopentin.
Asian Journal of Chemistry, 27, (5), 1651-1657, (2015)
   

Wang CL et al., Superparamagnetic Molecularly Imprinting Polymers for Adsorbent and Separation Pentapeptides by Surface ATRP.
Separation Science and Technology, 50, (12), 1768-1775, (2015)
   

Du CB et al., Preparation of surface-imprinted microspheres effectively controlled by orientated template immobilization using highly cross-linked raspberry-like microspheres for the selective recognition of an immunostimulating peptide.
Journal of Materials Chemistry B, 4, (8), 1510-1519, (2016)
   

Li J et al., Preparation of l-phenylalanine-imprinted solid-phase extraction sorbent by Pickering emulsion polymerization and the selective enrichment of l-phenylalanine from human urine.
Journal of Separation Science, 39, (10), 1863-1872, (2016)
   

Qian LW et al., Utilizing Macromolecular Chain as Functional Monomer and Crosslinker to Imprint BSA with Preserving the Structural Integrity of Template.
Chemical Journal of Chinese Universities, 37, (11), 2092-2100, (2016)
   

Song RY et al., Surface modification of imprinted polymer microspheres with ultrathin hydrophilic shells to improve selective recognition of glutathione in aqueous media.
Materials Science and Engineering: C, 60, 1-6, (2016)
   

Qian LW et al., Immobilization of BSA on ionic liquid functionalized magnetic Fe3O4 nanoparticles for use in surface imprinting strategy.
Talanta, 168, 174-182, (2017)
   

Song WQ et al., Synthesis of l-phenylalanine imprinted hydrogels with anti-biofouling capability by using a novel zwitterionic functional monomer.
Separation and Purification Technology, 182, 247-254, (2017)
   

Zhang N et al., Preparation of protein imprinted microspheres using amphiphilic ionic liquid as stabilizer and emulsifier via miniemulsion polymerization.
Chemical Engineering Journal, 317, 356-367, (2017)
   

Qian T

Qian T et al., Ultrasensitive dopamine sensor based on novel molecularly imprinted polypyrrole coated carbon nanotubes.
Biosensors and Bioelectronics, 58, 237-241, (2014)
   

Liu J et al., Molecularly Imprinted Polymer Enables High-Efficiency Recognition and Trapping Lithium Polysulfides for Stable Lithium Sulfur Battery.
Nano Letters, 17, (8), 5064-5070, (2017)
   

Qian YX

Wang ZH et al., An "on-off" Electrochemiluminescence Biosensor Based on Molecularly Imprinted Polymer and Recycling Amplifications for Determination of Dopamine.
Electrochimica Acta, 250, 309-319, (2017)
   

Qian ZY

He L et al., Current progress in research on the nanomaterials for biological macromolecules recognition.
Journal of Biomedical Engineering, 30, (2), 428-431, (2013)
   

Wang J et al., A Bottom-Up Approach to Dual Shape-Memory Effects.
Chemistry of Materials, 27, (7), 2439-2448, (2015)
   

Qiang LS

Zhu JH et al., Preparation and characterization of Cu(II)-molecularly imprinted polymer.
Chemical Journal of Chinese Universities, 27, (10), 1853-1855, (2006)
   

Qi JY et al., Selective removal of Cu(II) from contaminated water using molecularly imprinted polymer.
Frontiers of Chemical Engineering in China, 2, (1), 109-114, (2008)
   

Qiao CS

Jiang SH et al., A Novel Molecularly Imprinted Sensor for Direct Tartrazine Detection.
Analytical Letters, 47, (2), 323-330, (2014)
   

Qiao FX

Qiao FX et al., Molecularly Imprinted Polymers for Solid Phase Extraction.
Chromatographia, 64, (11), 625-634, (2006)
   

Sun HW et al., Characteristic of theophylline imprinted monolithic column and its application for determination of xanthine derivatives caffeine and theophylline in green tea.
Journal of Chromatography A, 1134, (1-2), 194-200, (2006)
   

Yan H et al., Molecularly Imprinted-Matrix Solid-Phase Dispersion for Selective Extraction of Five Fluoroquinolones in Eggs and Tissue.
Analytical Chemistry, 79, (21), 8242-8248, (2007)
   

Sun HW et al., Simultaneous isolation of six fluoroquinolones in serum samples by selective molecularly imprinted matrix solid-phase dispersion.
Analytica Chimica Acta, 625, (2), 154-159, (2008)
   

Sun HW et al., Recognition mechanism of water-compatible molecularly imprinted solid-phase extraction and determination of nine quinolones in urine by high performance liquid chromatography.
Journal of Chromatography A, 1212, (1-2), 1-9, (2008)
   

Sun HW et al., Ofloxacin imprinted polymer applied to the solid-phase extraction of six fluoroquinolones from serum.
Chinese Journal of Pharmaceutical Analysis, 28, (6), 848-852, (2008)
   

Yan H et al., Molecularly Imprinted Monolithic Column for Selective On-Line Extraction of Enrofloxacin and Ciprofloxacin from Urine.
Chromatographia, 70, (7), 1087-1093, (2009)
   

Qiao FX et al., Simultaneous extraction of enrofloxacin and ciprofloxacin from chicken tissue by molecularly imprinted matrix solid-phase dispersion.
Journal of Pharmaceutical and Biomedical Analysis, 53, (3), 795-798, (2010)
   

Qiao FX et al., Molecularly imprinted microspheres as SPE sorbent for selective extraction of four Sudan dyes in catsup products.
Journal of Chromatography B, 879, (27), 2891-2896, (2011)
   

Qiao FX, Proceeding, Validation of the Pseudo Imprinted Microspheres for Solid-Phase Extraction of Acyclovir from Swine Tissue, 
In: Advanced Materials Research, Chen R, Sung WP (Eds.), 1591-1594, (2011)
   

Qiao FX et al., Simultaneous analysis of fluoroquinolones and xanthine derivatives in serum by molecularly imprinted matrix solid-phase dispersion coupled with liquid chromatography.
Journal of Chromatography B, 879, (30), 3551-3555, (2011)
   

Qiao FX et al., Molecularly Imprinted-Solid Phase Extraction for Multi-Residues Analysis of Sudan Dyes in Sausage.
Asian Journal of Chemistry, 24, (3), 1107-1110, (2012)
   

Qiao FX, Proceeding, Determination of Sulfonamides in Milk Samples Based on RAFT Molecularly Imprinted Solid Phase Extraction, 
In: Advanced Materials Research, Chen SA, Liu ZT, Zeng QZ (Eds.), 1909-1912, (2012)
   

Qiao FX et al., Rapid screening of clenbuterol hydrochloride in chicken samples by molecularly imprinted matrix solid-phase dispersion coupled with liquid chromatography.
Journal of Chromatography B, 923 - 924, 136-140, (2013)
   

Qiao FX, Proceeding, Synthesis of RAFT Molecularly Imprinting Polymer Based on Ionic Liquid, 
In: Advanced Materials Research, Batisdas DM, Chang YQ (Eds.), 246-249, (2013)
   

Qiao FX et al., Water-compatible magnetic imprinted microspheres for rapid separation and determination of triazine herbicides in environmental water.
Journal of Chromatography B, 957, 84-89, (2014)
   

Yan HY et al., Rapid screening of ofloxacin enantiomers in human urine by molecularly imprinted solid-phase extraction coupled with ligand exchange chromatography.
Journal of Liquid Chromatography & Related Technologies, 37, (9), 1237-1248, (2014)
   

Yan HY et al., Hybrid molecularly imprinted polymers synthesized with 3-aminopropyltriethoxysilane-methacrylic acid monomer for miniaturized solid-phase extraction: A new and economical sample preparation strategy for determination of acyclovir in urine.
Journal of Chromatography A, 1346, 16-24, (2014)
   

Cao JK et al., Hydrophilic molecularly imprinted melamine-urea-formaldehyde monolithic resin prepared in water for selective recognition of plant growth regulators.
Analytica Chimica Acta, 943, 136-145, (2016)
   

Qiao FX et al., Preparation of selective magnetic dispersive solid-phase sorbent and its application for recognition clenbuterol from bovine urine.
Journal of Chromatography B, 1017-1018, 18-27, (2016)
   

Qiao FX et al., Molecularly imprinted ionic liquid magnetic microspheres for the rapid isolation of organochlorine pesticides in environmental water.
Journal of Separation Science, 39, (7), 1310-1315, (2016)
   

Wang L et al., Synthesis of mimic molecularly imprinted ordered mesoporous silica adsorbent by thermally reversible semicovalent approach for pipette-tip solid-phase extraction-liquid chromatography fluorescence determination of estradiol in milk.
Journal of Chromatography A, 1456, 58-67, (2016)
   

Wang MY et al., Water-compatible dummy molecularly imprinted resin prepared in aqueous solution for green miniaturized solid-phase extraction of plant growth regulators.
Journal of Chromatography A, 1458, 9-17, (2016)
   

Qiao H

Wang S et al., Determination of Environmental Estrogens by Molecular Imprinting Technique.
Journal of Food Science and Biotechnology, 26, (6), 99-104, (2007)
   

Qiao J

Li N et al., Novel Oligo(ethylene glycol)-Based Molecularly Imprinted Magnetic Nanoparticles for Thermally Modulated Capture and Release of Lysozyme.
ACS Applied Materials & Interfaces, 6, (19), 17289-17295, (2014)
   

Ji SL et al., Poly(amino acid)-based thermoresponsive molecularly imprinted magnetic nanoparticles for specific recognition and release of lysozyme.
Analytica Chimica Acta, 909, 60-66, (2016)
   

Qiao JD

Qiao JD et al., Simultaneous Determination of Four Sudan Dyes in Egg Yolks by Molecularly Imprinted SPE Coupled with LC-UV Detection.
Chromatographia, 73, (3), 227-233, (2011)
   

Qiao JD et al., Determination of ofloxacin and lomefloxacin in chicken muscle using molecularly imprinted solid-phase extraction coupled with liquid chromatography.
Journal of Separation Science, 34, (19), 2668-2673, (2011)
   

Wang H et al., Determination of dicofol in aquatic products using molecularly imprinted solid-phase extraction coupled with GC-ECD detection.
Talanta, 85, (4), 2100-2105, (2011)
   

Yan HY et al., Molecularly imprinted solid-phase extraction combined with ultrasound-assisted dispersive liquid-liquid microextraction for the determination of four Sudan dyes in sausage samples.
Analyst, 136, (12), 2629-2634, (2011)
   

Yan HY et al., Molecularly imprinted matrix solid-phase dispersion combined with dispersive liquid-liquid microextraction for the determination of four Sudan dyes in egg yolk.
Journal of Chromatography A, 1218, (16), 2182-2188, (2011)
   

Yan HY et al., Molecularly imprinted solid-phase extraction coupled to liquid chromatography for determination of Sudan dyes in preserved beancurds.
Food Chemistry, 132, (1), 649-654, (2012)
   

Qiao JD et al., Dispersive Solid-Phase Extraction Based on Magnetic Dummy Molecularly Imprinted Microspheres for Selective Screening of Phthalates in Plastic Bottled Beverages.
Journal of Agricultural and Food Chemistry, 62, (13), 2782-2789, (2014)
   

Qiao JX

Li N et al., Separation and purification of the antioxidant compounds, caffeic acid phenethyl ester and caffeic acid from mushrooms by molecularly imprinted polymer.
Food Chemistry, 139, (1-4), 1161-1167, (2013)
   

Qiao L

Lan HZ et al., An automated solid-phase microextraction method based on magnetic molecularly imprinted polymer as fiber coating for detection of trace estrogens in milk powder.
Journal of Chromatography A, 1331, 10-18, (2014)
   

Qiao L et al., Magnetic nanospheres with a molecularly imprinted shell for the preconcentration of diethylstilbestrol.
Microchimica Acta, 181, (11-12), 1341-1351, (2014)
   

Qiao L et al., Novel molecularly imprinted stir bar sorptive extraction based on an 8-electrode array for preconcentration of trace exogenous estrogens in meat.
Analytica Chimica Acta, 853, 342-350, (2015)
   

Wang D et al., Simultaneous electrochemical immunoassay using graphene-Au grafted recombinant apoferritin-encoded metallic labels as signal tags and dual-template magnetic molecular imprinted polymer as capture probes.
Biosensors and Bioelectronics, 65, 78-82, (2015)
   

Liu HB et al., Electro-deposited poly-luminol molecularly imprinted polymer coating on carboxyl graphene for stir bar sorptive extraction of estrogens in milk.
Journal of Chromatography B, 1027, 50-56, (2016)
   

Qiao N

Kong DL et al., Fast and efficient removal of copper using sandwich-like graphene oxide composite imprinted materials.
Chemical Engineering Journal, 326, 141-150, (2017)
   

Kong DL et al., Facile Preparation of Ion-Imprinted Chitosan Microspheres Enwrapping Fe3O4 and Graphene Oxide by Inverse Suspension Cross-Linking for Highly Selective Removal of Copper(II).
ACS Sustainable Chemistry & Engineering, 5, (8), 7401-7409, (2017)
   

Qiao R

Zhong SA et al., Preparation and Permeation Characteristics of Copper Ion Imprinted Polymer Membranes.
Chinese Journal of Applied Chemistry, 25, (8), 989-991, (2008)
   

Zhong SA et al., Preparation and adsorption behaviors of Cu(II) ion-imprinted polymers.
Journal of Chongqing University (English Edition), 7, (1), 23-27, (2008)
   

Qiao S

Su LQ et al., Studies on the synthesis and properties of malachite green imprinted polymer.
Chinese Chemical Letters, 18, (2), 229-232, (2007)
   

Guo XJ et al., The Synthesis of Tetrabromobisphenol A Molecularly Imprinted Polymers and Investigation of Its Binding Characteristics.
Chemical Industry Times, 23, (3), 13-16, (2009)
   

Qiao XG

Xu ZX et al., Determination of Trace Para Red Residues in Foods through On-Line Molecularly Imprinted Solid Phase Extraction Coupled with High-Performance Liquid Chromatography.
Journal of Food Science, 75, (1), C49-C54, (2010)
   

Meng L et al., Study of an Online Molecularly Imprinted Solid Phase Extraction Coupled to Chemiluminescence Sensor for the Determination of Trichlorfon in Vegetables.
Journal of Agricultural and Food Chemistry, 59, (24), 12745-12751, (2011)
   

Song JM et al., Molecularly imprinted solid-phase extraction combined with high-performance liquid chromatography for analysis of trace olaquindox residues in chick feeds.
Journal of the Science of Food and Agriculture, 91, (13), 2378-2385, (2011)
   

Xu ZX et al., Preparation and Characterization of Hydrophilic Olaquindox Molecularly Imprinted Polymer in Aqueous Environment.
International Journal of Polymer Analysis and Characterization, 16, (1), 67-77, (2011)
   

Xu ZX et al., The Biomimetic Immunoassay Based on Molecularly Imprinted Polymer: A Comprehensive Review of Recent Progress and Future Prospects.
Journal of Food Science, 76, (2), R69-R75, (2011)
   

Meng L et al., Development of a Direct Competitive Biomimetic Enzyme-Linked Immunosorbent Assay Based on a Hydrophilic Molecularly Imprinted Membrane for the Determination of Trichlorfon Residues in Vegetables.
Food Analytical Methods, 5, (5), 1229-1236, (2012)
   

Xin JH et al., Simultaneous separation and determination of eight organophosphorous pesticide residues in vegetables through molecularly imprinted solid-phase extraction coupled to gas chromatography.
Journal of Separation Science, 35, (24), 3501-3508, (2012)
   

Xu ZX et al., Development of an on-line molecularly imprinted chemiluminescence sensor for determination of trace olaquindox in chick feeds.
Journal of the Science of Food and Agriculture, 92, (13), 2696-2702, (2012)
   

Xu ZX et al., Preparation and Characterization of a Novel Surface Molecularly Imprinted Polymer for Selective Recognition of Sudan III.
Journal of Macromolecular Science, Part B, 51, (11), 2113-2121, (2012)
   

Wang XL et al., Simultaneous Determination of Nine Trace Organophosphorous Pesticide Residues in Fruit Samples Using Molecularly Imprinted Matrix Solid-Phase Dispersion Followed by Gas Chromatography.
Journal of Agricultural and Food Chemistry, 61, (16), 3821-3827, (2013)
   

Xin JH et al., Molecularly Imprinted Polymer as Sorbent for Solid-Phase Extraction Coupling to Gas Chromatography for the Simultaneous Determination of Trichlorfon and Monocrotophos Residues in Vegetables.
Food Analytical Methods, 6, (1), 274-281, (2013)
   

Xu LH et al., Preparation of a Hydrophilic Molecularly Imprinted Polymer and Its Application in Solid-Phase Extraction to Determine of Trace Acrylamide in Foods Coupled with High-Performance Liquid Chromatography.
Food Analytical Methods, 6, (3), 838-844, (2013)
   

Zhao DY et al., Development of a biomimetic enzyme-linked immunosorbent assay method based on a hydrophilic molecularly imprinted polymer film for determination of olaquindox in chick feed samples.
Journal of Immunoassay and Immunochemistry, 34, (1), 16-29, (2013)
   

Sun Q et al., Synthesis of an Organic-Inorganic Hybrid Polymeric Material and its Adsorption Performance Characterization Toward Acrylamide.
Journal of Macromolecular Science, Part B, 53, (4), 683-692, (2014)
   

Sun Q et al., Study on a biomimetic enzyme-linked immunosorbent assay method for rapid determination of trace acrylamide in French fries and cracker samples.
Journal of the Science of Food and Agriculture, 94, (1), 102-108, (2014)
   

Sun Q et al., Synthesis of an Organic-Inorganic Hybrid Polymeric Material and Its Adsorption Performance Characterization Toward Acrylamide.
Journal of Macromolecular Science, Part B, 53, (3), 486-495, (2014)
   

Wang XL et al., Study of a molecularly imprinted solid-phase extraction coupled with high-performance liquid chromatography for simultaneous determination of trace trichlorfon and monocrotophos residues in vegetables.
Journal of the Science of Food and Agriculture, 94, (7), 1409-1415, (2014)
   

Zhao T et al., Study on a Molecularly Imprinted Solid-Phase Extraction Coupled to Capillary Electrophoresis Method for the Determination of Trace Trichlorfon in Vegetables.
Food Analytical Methods, 7, (6), 1159-1165, (2014)
   

Zhao T et al., Study on an electrochromatography method based on organic-inorganic hybrid molecularly imprinted monolith for determination of trace trichlorfon in vegetables.
Journal of the Science of Food and Agriculture, 94, (10), 1974-1980, (2014)
   

Shi C et al., Biomimetic Enzyme-linked Immunosorbent Assay Using a Hydrophilic Molecularly Imprinted Membrane for Recognition and Fast Determination of Trichlorfon and Acephate Residues in Vegetables.
Food Analytical Methods, 8, (10), 2496-2503, (2015)
   

Li DQ et al., Molecularly Imprinted Solid-Phase Extraction Coupled with High-Performance Liquid Chromatography for the Determination of Trace Trichlorfon and Monocrotophos Residues in Fruits.
Food Analytical Methods, 10, (5), 1284-1292, (2017)
   

Li J et al., A study on biomimetic immunoassay-capillary electrophoresis method based on molecularly imprinted polymer for determination of trace trichlorfon residue in vegetables.
Food Chemistry, 221, 1285-1290, (2017)
   

Shi XJ et al., A Biomimetic Sensor with Signal Enhancement of Ferriferrous Oxide-Reduced Graphene Oxide Nanocomposites for Ultratrace Levels Quantification of Methamidophos or Omethoate in Vegetables.
Food Analytical Methods, 10, (4), 910-920, (2017)
   

Qiao XQ

Cheng XL et al., Vortex-assisted magnetic dispersive solid-phase microextraction for rapid screening and recognition of dicofol residues in tea products.
Food Chemistry, 162, 104-109, (2014)
   

Qiao XS

Yu TM et al., Selective adsorption of Zn2+ on surface ion-imprinted polymer.
Desalination and Water Treatment, 57, (33), 15455-15466, (2016)
   

Qiao Y

Sun DS et al., Fabrication of highly selective ion imprinted macroporous membranes with crown ether for targeted separation of lithium ion.
Separation and Purification Technology, 175, 19-26, (2017)
   

Qiao YW

Li YH et al., Development of a group selective molecularly imprinted polymers based solid phase extraction of malachite green from fish water and fish feed samples.
Analytica Chimica Acta, 624, (2), 317-325, (2008)
   

Qiao YY

Shi C et al., Synthesis and evaluation of ion-imprinted sol-gel material of selenite.
Analytical Methods, 9, (10), 1658-1664, (2017)
   

Qiao ZW

Li YB et al., Preparation of atrazine surface-imprinted material MIP-PSSS/SiO2 and study on its molecule recognition character.
Korean Journal of Chemical Engineering, 31, (5), 896-904, (2014)
   

Gao BJ et al., Preparation of Acid Dye Molecule Surface-Imprinted Material for Effective Removal of Acid Dyes from Water and Study on its Molecule Recognition Performance.
Separation Science and Technology, 50, (8), 1108-1119, (2015)
   

Qie ZW

Tian JH et al., A core-shell-structured molecularly imprinted polymer on upconverting nanoparticles for selective and sensitive fluorescence sensing of sulfamethazine.
Analyst, 140, (15), 5301-5307, (2015)
   

Qin AL

Li SH et al., Selective detection of fenaminosulf via a molecularly imprinted fluorescence switch and silver nano-film amplification.
Biosensors and Bioelectronics, 71, 342-347, (2015)
   

Qin C

Qin C et al., Ion Imprinted Magnetic Solid Phase Extraction Combined with Graphite Furnace Atomic Absorption Spectrometry for the Analysis of Trace Ni(II) in Environmental Water Samples.
Journal of Analytical Science, 30, (6), 783-788, (2014)
   

Qin CC

Liu Y et al., Selective Ce(III) ion-imprinted polymer grafted on Fe3O4 nanoparticles supported by SBA-15 mesopores microreactor via surface-initiated RAFT polymerization.
Microporous And Mesoporous Materials, 234, 176-185, (2016)
   

Qin CC et al., A Novel Electrochemical Sensor Based on Graphene Oxide Decorated with Silver Nanoparticles-Molecular Imprinted Polymers for Determination of Sunset Yellow in Soft Drinks.
Food Analytical Methods, 10, (7), 2293-2301, (2017)
   

Qin CL

Li ZZ et al., Molecularly imprinted polymer for specific extraction of hypericin from Hypericum perforatum L. herbal extract.
Journal of Pharmaceutical and Biomedical Analysis, 98, 210-220, (2014)
   

Qin DL

Wang Y et al., Analysis of Melamine in Milk Powder by CNT-MIP with Matrix Solid Phase Dispersion and LC-MS/MS.
Food Analytical Methods, 10, (5), 1386-1396, (2017)
   

You XX et al., Preparation of magnetic molecularly imprinted polymers by atom transfer radical polymerization for the rapid extraction of avermectin from fish samples.
Journal of Separation Science, 40, (2), 424-430, (2017)
   

Qin F

Huang XD et al., Short columns with molecularly imprinted monolithic stationary phases for rapid separation of diastereomers and enantiomers.
Journal of Chromatography B-Analytical Technologies in the Biomedical and Life Sciences, 804, (1), 13-18, (2004)
   

Qin F et al., Monolithic enantiomer-selective stationary phases for capillary electrochromatography.
Journal of Separation Science, 29, (10), 1332-1343, (2006)
   

Tang KJ et al., Determination of four sulfonylurea herbicides residues by high performance liquid chromatography-mass spectrometry with molecular imprinting solid phase extract.
Journal of Instrumental Analysis, 28, (12), 1401-1404, (2009)
   

Guo BY et al., Citrinin selective molecularly imprinted polymers for SPE.
Journal of Separation Science, 33, (8), 1156-1160, (2010)
   

Qin H

Qin H et al., Progress of Proteins Imprinted Technique and Prospect of Its Application.
Food Science, 28, (8), 577-580, (2007)
   

Quan Y et al., Study on Preparation and Performances of Acrylamide Molecularly Imprinted Polymers.
Food and Fermentation Industries, (12), 177-180, (2010)
   

Qin HQ

Zhao L et al., Recent advances of mesoporous materials in sample preparation.
Journal of Chromatography A, 1228, (1), 193-204, (2012)
   

Qin J

Shen HX et al., Proceeding, Preparation and Recognition Performance of Chloramphenicol Molecularly Imprinted Polymer, 
In: Applied Mechanics and Materials, Sun MJ, Zhang YJ (Eds.), 192-196, (2013)
   

He KC et al., Selective adsorption of L-TA/D-TA by [beta]-cyclodextrin derivative modified with l-tryptophan: Isotherm, kinetic and thermodynamics studies.
Journal of Industrial and Engineering Chemistry, 20, (4), 1293-1300, (2014)
   

Qin L

Meng ZH et al., Determination of degradation products of nerve agents human serum by solid phase extraction using molecularly imprinted polymer.
Analytica Chimica Acta, 435, (1), 121-127, (2001)
   

Qin L et al., Molecularly imprinted polymer prepared with bonded [beta]-cyclodextrin and acrylamide on functionalized silica gel for selective recognition of tryptophan in aqueous media.
Journal of Chromatography A, 1187, (1-2), 94-102, (2008)
   

Zhang M et al., Preparation of protein molecularly imprinted composite membrane by sol-gel coating method and its permeation mechanism.
Chemical Journal of Chinese Universities, 29, (3), 498-504, (2008)
   

Qin L et al., Macroporous Thermosensitive Imprinted Hydrogel for Recognition of Protein by Metal Coordinate Interaction.
Analytical Chemistry, 81, (17), 7206-7216, (2009)
   

Qin L et al., Surface-modified polystyrene beads as photografting imprinted polymer matrix for chromatographic separation of proteins.
Journal of Chromatography A, 1216, (5), 807-814, (2009)
   

Zhang W et al., Novel surface modified molecularly imprinted polymer using acryloyl-[beta]-cyclodextrin and acrylamide as monomers for selective recognition of lysozyme in aqueous solution.
Journal of Chromatography A, 1216, (21), 4560-4567, (2009)
   

Chen RR et al., Novel surface-modified molecularly imprinted membrane prepared with iniferter for permselective separation of lysozyme.
Journal of Membrane Science, 363, (1-2), 212-220, (2010)
   

Zhang W et al., Protein imprinted polymer using acryloyl-[beta]-cyclodextrin and acrylamide as monomers.
Applied Surface Science, 256, (9), 3000-3005, (2010)
   

Qin L et al., Molecularly imprinted beads with double thermosensitive gates for selective recognition of proteins.
Analytical and Bioanalytical Chemistry, 399, (10), 3375-3385, (2011)
   

Qin L et al., A Thermosensitive Monolithic Column as an Artificial Antibody for the On-line Selective Separation of the Protein.
Chemistry - A European Journal, 17, (5), 1696-1704, (2011)
   

Jia M et al., Preparation and application of lysozyme imprinted monolithic column with dopamine as the functional monomer.
Journal of Materials Chemistry, 22, (2), 707-713, (2012)
   

Liu WF et al., Synthesis and characterization of dibenzothiophene imprinted polymers on the surface of iniferter-modified carbon microspheres.
Materials Chemistry and Physics, 148, (3), 605-613, (2014)
   

Qin L et al., Functional monomer screening and preparation of dibenzothiophene-imprinted polymers on the surface of carbon microsphere.
Monatshefte für Chemie - Chemical Monthly, 146, (3), 449-458, (2015)
   

Lai C et al., Synthesis of surface molecular imprinted TiO2/graphene photocatalyst and its highly efficient photocatalytic degradation of target pollutant under visible light irradiation.
Applied Surface Science, 390, 368-376, (2016)
   

Liu WF et al., Molecularly imprinted polymers on the surface of porous carbon microspheres for capturing dibenzothiophene.
Microchimica Acta, 183, (3), 1153-1160, (2016)
   

Ma P et al., A biomimetic Setaria viridis-inspired imprinted nanoadsorbent: green synthesis and application to the highly selective and fast removal of sulfamethazine.
RSC Advances, 6, (12), 9619-9630, (2016)
   

Qin L et al., Porous Carbon Microspheres: An Excellent Support To Prepare Surface Molecularly Imprinted Polymers for Selective Removal of Dibenzothiophene in Fuel Oil.
Industrial & Engineering Chemistry Research, 55, (6), 1710-1719, (2016)
   

Qin L et al., Surface molecularly imprinted polymers grafted on ordered mesoporous carbon nanospheres for fuel desulfurization.
RSC Advances, 6, (15), 12504-12513, (2016)
   

Qin LT

Li PF et al., Preparation and evaluation of paclitaxel-imprinted polymers with a rosin-based crosslinker as the stationary phase in high-performance liquid chromatography.
Journal of Chromatography A, 1502, 30-37, (2017)
   

Qin M

Wang C et al., DNA based signal amplified molecularly imprinted polymer electrochemical sensor for multiplex detection.
RSC Advances, 6, (55), 49597-49603, (2016)
   

Qin P

Guo L et al., Study on Molecular Imprinting Detection Technique of Sulfonylurea Herbicides.
Food Research and Development, 33, (5), 216-219, (2012)
   

Feng F et al., A novel quartz crystal microbalance sensor array based on molecular imprinted polymers for simultaneous detection of clenbuterol and its metabolites.
Talanta, 167, 94-102, (2017)
   

Qin PY

Lv YQ et al., Application of molecular dynamics modeling for the prediction of selective adsorption properties of dimethoate imprinting polymer.
Sensors and Actuators B: Chemical, 133, (1), 15-23, (2008)
   

Qin PY et al., Characterization and selectivity studies of molecular imprinted membranes of Puerarin using scanning electron microscopy.
Scanning, 33, (1), 7-12, (2011)
   

Zhao X et al., Preparation and evaluation of molecular imprinted composite membranes for chiral resolution of ibuprofen.
Journal of Beijing University of Chemical Technology (Natural Science Edition), 40, (1), 5-9, (2013)
   

Qin PZ

Chen KC et al., A fluorescent glycosyl-imprinted polymer for pH and temperature regulated sensing of target glycopeptide antibiotic.
Biosensors and Bioelectronics, 94, 609-615, (2017)
   

Qin S

Li BW et al., Quantum Dot-Based Molecularly Imprinted Polymers on Three-Dimensional Origami Paper Microfluidic Chip for Fluorescence Detection of Phycocyanin.
ACS Sensors, 2, (2), 243-250, (2017)
   

Qin SL

Qin SL et al., Simultaneous determination of five sulfonamides in wastewater using group-selective molecularly imprinted solid-phase extraction coupled with HPLC-DAD.
Analytical Methods, 4, (12), 4278-4283, (2012)
   

Qin SL et al., Rapid and selective extraction of multiple sulfonamides from aqueous samples based on Fe3O4-chitosan molecularly imprinted polymers.
Analytical Methods, 7, (20), 8704-8713, (2015)
   

Qin SL et al., Mixed templates molecularly imprinted solid-phase extraction for the detection of sulfonamides in fish farming water.
Journal of Applied Polymer Science, 132, (8), Article No 41491-(2015)
   

Qin SL et al., Preparation and application research of sulfonamides mixed templates molecularly imprinted polymers.
Chinese Journal of Analysis Laboratory, 35, (5), 590-595, (2016)
   

Su LQ et al., Determination of Atrazine in Vegetables with Extraction by a Magnetite-Chitosan Molecularly Imprinted Polymer and Gas Chromatography.
Analytical Letters, 49, (14), 2177-2192, (2016)
   

Qin SY

Lu CM et al., Preparation of Nicotine-Imprinted Monolith by in-situ Surface Imprinting onto Internal Hole Surface of Macroporous Silica for Selective Enrichment and Separation of Nicotine in Environmental Water Sample.
Separation Science and Technology, 50, (14), 2124-2133, (2015)
   

Qin W

Yao JH et al., Computational design and synthesis of molecular imprinted polymers with high selectivity for removal of aniline from contaminated water.
Analytica Chimica Acta, 610, (2), 282-288, (2008)
   

Liang RN et al., Potentiometric sensor based on molecularly imprinted polymer for determination of melamine in milk.
Sensors and Actuators B: Chemical, 141, (2), 544-550, (2009)
   

Liu RG et al., Effective removal of rhodamine B from contaminated water using non-covalent imprinted microspheres designed by computational approach.
Biosensors and Bioelectronics, 25, (3), 629-634, (2009)
   

Liang RN et al., Potentiometric Sensing of Neutral Species Based on a Uniform-Sized Molecularly Imprinted Polymer as a Receptor.
Angewandte Chemie International Edition, 49, (14), 2556-2559, (2010)
   

Liang RN et al., Potentiometric Sensor Based on an Ion-Imprinted Polymer for Determination of Copper.
Sensor Letters, 9, (2), 557-562, (2011)
   

Xu SF et al., Preparation of hollow porous molecularly imprinted polymers and their applications to solid-phase extraction of triazines in soil samples.
Journal of Materials Chemistry, 21, (32), 12047-12053, (2011)
   

Liang RN et al., Potentiometric Sensor Based on Molecularly Imprinted Polymers for Rapid Determination of Clenbuterol in Pig Urine.
Chinese Journal of Analytical Chemistry, 40, (3), 354-358, (2012)
   

Chen LS et al., Preparation and Characterization of Toluene Molecularly Imprinted Polymer.
Guangdong Chemical Industry, 40, (1), 21-23, (2013)
   

Kou LJ et al., Potentiometric sensor for determination of neutral bisphenol A using a molecularly imprinted polymer as a receptor.
Analytical and Bioanalytical Chemistry, 405, (14), 4931-4936, (2013)
   

Liang RN et al., Molecularly imprinted nanoparticles based potentiometric sensor with a nanomolar detection limit.
Sensors and Actuators B: Chemical, 188, 972-977, (2013)
   

Geng FF et al., A potentiometric biosensing system based on an isolated degrading bacterium Klebsiella sp. MP-6 for the determination of methyl parathion.
RSC Advances, 5, (43), 34475-34480, (2015)
   

Li SX et al., Potentiometric Detection of Trace-Level Chlorpyrifos in Seawater Using a Polymeric Membrane Electrode Coupled with on-line Molecularly Imprinted Solid-Phase Extraction.
International Journal of Electrochemical Science, 10, 1393-1403, (2015)
   

Liang RN et al., Potentiometric detection of chemical vapors using molecularly imprinted polymers as receptors.
Scientific Reports, 5, ArticleNo12462-(2015)
   

Liang RN et al., Determination of hydroxylated polychlorinated biphenyls by offline solid-phase extraction-liquid chromatography-tandem mass spectrometry using a molecularly imprinted polymer as a sorbent for sample preconcentration.
Talanta, 144, 115-121, (2015)
   

Wei WC et al., Hydrophilic molecularly imprinted polymers for selective recognition of polycyclic aromatic hydrocarbons in aqueous media.
RSC Advances, 5, (4), 2659-2662, (2015)
   

Wang TT et al., An all-solid-state imprinted polymer-based potentiometric sensor for determination of bisphenol S.
RSC Advances, 6, (77), 73308-73312, (2016)
   

Liang RN et al., Mussel-Inspired Surface-Imprinted Sensors for Potentiometric Label-Free Detection of Biological Species.
Angewandte Chemie International Edition, 56, (24), 6833-6837, (2017)
   

Qin XC

Deng Y et al., Aging effect of a molecularly imprinted polymer on a quartz tuning fork sensor for detection of volatile organic compounds.
Sensors and Actuators B: Chemical, 211, 25-32, (2015)
   

Qin XL

Meng X et al., A molecularly imprinted electrochemical sensor based on gold nanoparticles and multiwalled carbon nanotube-chitosan for the detection of tryptamine.
RSC Advances, 4, (73), 38649-38654, (2014)
   

Qin XY

Lu YK et al., Preparation and application of the sacrificial mesoporous silica imprinted polymers for the selective solid-phase extraction of ofloxacin residues in chicken.
Chemical Journal on Internet, 10, (6), Art. No. 106032pe-(2008)
   

Lu YK et al., Preparation and evaluation of molecularly imprinted monolithic column for liquid chromatographic determination of enrofloxacin in eggs.
Chemical Journal on Internet, 11, (5), Article No. 115026pe-(2009)
   

Liu QS et al., Novel Beta-Tubulin-Immobilized Nanoparticles Affinity Material for Screening [beta]-Tubulin Inhibitors from a Complex Mixture.
ACS Applied Materials & Interfaces, 9, (7), 5725-5732, (2017)
   

Qin Y

Bakker E et al., Electrochemical Sensors.
Analytical Chemistry, 78, (12), 3965-3984, (2006)
   

Duan YQ et al., Optimization of the process parameters of synthesis of oligomeric procyanidins imprinted polymer.
Scientific Research and Essays, 5, (19), 2953-2964, (2010)
   

Chen ZD et al., Application of "Ion Imprinted" Polyaniline Electrode Column Modulated by Potential in the Analysis of Anions.
Journal of Instrumental Analysis, 30, (9), 953-958, (2011)
   

Xu FF et al., Preparation and Adsorption Property of (-)-Epigallocatechin Gallate Surface Molecularly Imprinted Polymer.
The Chinese Journal of Process Engineering, 11, (4), 706-710, (2011)
   

Xu FF et al., Advance in surface molecularly imprinted carriers.
Chemical Industry and Engineering Progress, 30, (5), 1033-1038, 1134, (2011)
   

Duan YQ et al., Determination of epigallocatechin-3-gallate with a high-efficiency electrochemical sensor based on a molecularly imprinted poly(o-phenylenediamine) film.
Journal of Applied Polymer Science, 129, (5), 2882-2890, (2013)
   

Fan JP et al., A novel molecularly imprinted polymer of the specific ionic liquid monomer for selective separation of synephrine from methanol-water media.
Food Chemistry, 141, (4), 3578-3585, (2013)
   

Zhang HH et al., Molecularly Imprinted Membrane Possessing Selectivity and Adsorption Behaviour to Targeted (-)-Epigallocatechin-3-gallate Molecule.
Asian Journal of Chemistry, 25, (7), 3711-3718, (2013)
   

Duan FF et al., Efficient adsorptive removal of dibenzothiophene by graphene oxide-based surface molecularly imprinted polymer.
RSC Advances, 4, (3), 1469-1475, (2014)
   

Duan FF et al., Preparation and Evaluation of Water-Compatible Surface Molecularly Imprinted Polymers for Selective Adsorption of Bisphenol A from Aqueous Solution.
Industrial & Engineering Chemistry Research, 53, (37), 14291-14300, (2014)
   

Fan JP et al., Synthesis and Evaluation of Uniformly Sized Synephrine-Imprinted Microparticles Prepared by Precipitation Polymerization.
Separation Science and Technology, 49, (2), 258-266, (2014)
   

Duan FF et al., Water-compatible surface molecularly imprinted polymers with synergy of bi-functional monomers for enhanced selective adsorption of bisphenol A from aqueous solution.
Environmental Science: Nano, 3, (1), 213-222, (2016)
   

Qin YC

Yao T et al., Recent Advances in Application of Surface Plasmon Resonance Sensors Based on Molecular Imprinted Polymers in Food Safety Detection.
Journal of Instrumental Analysis, 34, (2), 237-244, (2015)
   

Yao T et al., Enhancement of surface plasmon resonance signals using a MIP/GNPs/rGO nano-hybrid film for the rapid detection of ractopamine.
Biosensors and Bioelectronics, 75, 96-100, (2016)
   

Qin YP

Li DY et al., A "turn-on" fluorescent receptor for detecting tyrosine phosphopeptide using the surface imprinting procedure and the epitope approach.
Biosensors and Bioelectronics, 66, 224-230, (2015)
   

Qin YP et al., Preparation of High-Efficiency Cytochrome c-Imprinted Polymer on the Surface of Magnetic Carbon Nanotubes by Epitope Approach via Metal Chelation and Six-Membered Ring.
ACS Applied Materials & Interfaces, 8, (16), 10155-10163, (2016)
   

Qin YR

Lai SZ et al., Rapid and efficient enantioseparation of (S)-amlodipine by surface-imprinted core-shell polymer microspheres.
Journal of Separation Science, 39, (22), 4354-4359, (2016)
   

Qin YT

Lv YQ et al., Molecularly imprinted plasmonic nanosensor for selective SERS detection of protein biomarkers.
Biosensors and Bioelectronics, 80, 433-441, (2016)
   

Qin YX

Wang ZH et al., Copper(II) determination by using carbon paste electrode modified with molecularly imprinted polymer.
Electrochimica Acta, 58, (1), 750-756, (2011)
   

Wang ZH et al., Preparation of electrochemical sensor for lead(II) based on molecularly imprinted film.
Applied Surface Science, 258, (6), 2017-2021, (2012)
   

Qin YY

Liu XL et al., Enhanced and Selective Degradation of Ciprofloxacin Performance with Surface Molecular Imprinted Cds Photocatalyst by Microwave-Assisted Method.
Fresenius Environmental Bulletin, 26, (1A), 1033-1040, (2017)
   

Lu J et al., Multilayered ion-imprinted membranes with high selectivity towards Li+ based on the synergistic effect of 12-crown-4 and polyether sulfone.
Applied Surface Science, 427, 931-941, (2018)
   

Qin Z

Zhang YQ et al., Study of the Preparation of Flavone Imprinted Silica Microspheres and Their Molecular Recognition Function.
Chemical Engineering & Technology, 30, (8), 1014-1019, (2007)
   

Zhang YQ et al., Synthesis of silica adsorbent and its selective separation for flavone.
Journal of Tianjin University Science and Technology, 40, (4), 411-415, (2007)
   

Zhang YQ et al., Synthesis of silica adsorbent and its selective separation for flavone (Translated from: Journal of Tianjin University, 2007, 40(4): 411-415).
Frontiers of Chemistry in China, 3, (3), 320-324, (2008)
   

Qing BJ

Li QA et al., Strontium and calcium ion adsorption by molecularly imprinted hybrid gel.
Chemical Engineering Journal, 157, (2-3), 401-407, (2010)
   

Qiu B

Liu MH et al., Synthesis and applications of diethylstilbestrol-based molecularly imprinted polymer-coated hollow fiber tube.
Analytica Chimica Acta, 663, (1), 33-38, (2010)
   

Qiu CG

Chen Y et al., Sample preparation.
Journal of Chromatography A, 1184, (1-2), 191-219, (2008)
   

Qiu CX

Xiao SS et al., Preparation of molecularly imprinted polymers via atom transfer radical polymerization and its characteristics.
Journal of Functional Materials, 44, (24), 3611-3615+3621, (2013)
   

Yang WM et al., Rational design and preparation for novel denitrogenation adsorbents by computational simulation and improved atom transfer radical polymerization.
New Journal of Chemistry, 37, (9), 2758-2767, (2013)
   

Liu LK et al., Rational design and preparation of magnetic imprinted polymers for removal of indole by molecular simulation and improved atom transfer radical polymerization.
RSC Advances, 4, (2), 605-616, (2014)
   

Qiu CX et al., Rational design and preparation of dibenzothiophene-targeting molecularly imprinted polymers with molecular dynamics approaches and surface-initiated activators regenerated by electron-transfer atom-transfer radical polymerization.
Journal of Applied Polymer Science, 132, (41), ArticleNo42629-(2015)
   

Qiu CX et al., Surface molecular imprinting on hybrid SiO2-coated CdTe nanocrystals for selective optosensing of bisphenol A and its optimal design.
Applied Surface Science, 345, 405-417, (2015)
   

Qiu FX

He KC et al., Selective adsorption of L-TA/D-TA by [beta]-cyclodextrin derivative modified with l-tryptophan: Isotherm, kinetic and thermodynamics studies.
Journal of Industrial and Engineering Chemistry, 20, (4), 1293-1300, (2014)
   

Liu SC et al., Graphene oxide based molecularly imprinted polymers with double recognition abilities: The combination of covalent boronic acid and traditional non-covalent monomers.
Chemical Engineering Journal, 290, 220-231, (2016)
   

Pan JM et al., Hierarchical porous molecule/ion imprinted polymers with double specific binding sites: Combination of Pickering HIPEs template and pore-filled strategy.
Chemical Engineering Journal, 301, 210-221, (2016)
   

Li X et al., Impedimetric Enzyme-Free Detection of Glucose via a Computation-Designed Molecularly Imprinted Electrochemical Sensor Fabricated on Porous Ni Foam.
Electroanalysis, 29, (5), 1243-1251, (2017)
   

Zhu HJ et al., Ion/molecule imprinted polymers with double binding sites via twice imprinting strategy for selective and simultaneous removal of [lambda]-cyhalothrin and Cu(II).
Journal of Industrial and Engineering Chemistry, 49, 198-207, (2017)
   

Qiu G

Li XT et al., Molecularly imprinted hydrogel photonic crystals for fast detection of glucose.
Abstracts of Papers of the American Chemical Society, 248, (COLL), 537-(2014)
   

Qiu GH

Wang XB et al., Highly selective magnetic polymer particles via molecular imprinting.
Korean Journal of Chemical Engineering, 32, (11), 2355-2360, (2015)
   

Qiu H

Wang JX et al., Optical Detection of [lambda]-Cyhalothrin by Core-Shell Fluorescent Molecularly Imprinted Polymers in Chinese Spirits.
Journal of Agricultural and Food Chemistry, 63, (9), 2392-2399, (2015)
   

Wang JX et al., Molecularly imprinted fluorescent hollow nanoparticles as sensors for rapid and efficient detection [lambda]-cyhalothrin in environmental water.
Biosensors and Bioelectronics, 85, 387-394, (2016)
   

Qiu H et al., A precise and efficient detection of Beta-Cyfluthrin via fluorescent molecularly imprinted polymers with allyl fluorescein as functional monomer in agricultural products.
Food Chemistry, 217, 620-627, (2017)
   

Qiu HB

Qiu HB et al., Supramolecular Chiral Transcription and Recognition by Mesoporous Silica Prepared by Chiral Imprinting of a Helical Micelle.
Angewandte Chemie International Edition, 48, (17), 3069-3072, (2009)
   

Qiu HB et al., Chiral mesoporous silica: Chiral construction and imprinting via cooperative self-assembly of amphiphiles and silica precursors.
Chemical Society Reviews, 40, (3), 1259-1268, (2011)
   

Xie JJ et al., Handedness Inversion of Chiral Amphiphilic Molecular Assemblies Evidenced by Supramolecular Chiral Imprinting in Mesoporous Silica Assemblies.
Chemistry - A European Journal, 18, (9), 2559-2564, (2012)
   

Qiu HD

Yang P et al., Preparation of quercetin imprinted core-shell organosilicate microspheres using surface imprinting technique.
Chinese Chemical Letters, 23, (5), 615-618, (2012)
   

Feng JJ et al., The development of solid-phase microextraction fibers with metal wires as supporting substrates.
TrAC Trends in Analytical Chemistry, 46, 44-58, (2013)
   

Long ZR et al., Selective recognition and discrimination of water-soluble azo dyes by a seven-channel molecularly imprinted polymer sensor array.
Journal of Separation Science, 37, (19), 2764-2770, (2014)
   

Long ZR et al., Nanosilica-based molecularly imprinted polymer nanoshell for specific recognition and determination of rhodamine B in red wine and beverages.
Journal of Chromatography B, 1029-1030, 230-238, (2016)
   

Long ZR et al., Highly selective coextraction of rhodamine B and dibenzyl phthalate based on high-density dual-template imprinted shells on silica microparticles.
Journal of Separation Science, 40, (2), 506-513, (2017)
   

Qiu HM

Fan LL et al., Removal of Ag+ from water environment using a novel magnetic thiourea-chitosan imprinted Ag+.
Journal of Hazardous Materials, 194, (1), 193-201, (2011)
   

Lu FG et al., Proceeding, Molecularly Imprinted Polymer for Preparation and Adsorption of Phenylalanine, 
In: Advanced Materials Research, Liu SQ, Zuo M (Eds.), 638-641, (2011)
   

Qiu HM et al., Proceeding, Molecularly Imprinted Polymer Prepared by Precipitation Polymerization for Quercetin, 
In: Advanced Materials Research, Liu SQ, Zuo M (Eds.), 646-648, (2011)
   

Fan LL et al., Removal of alizarin red from water environment using magnetic chitosan with Alizarin Red as imprinted molecules.
Colloids and Surfaces B: Biointerfaces, 91, (1), 250-257, (2012)
   

Lu FG et al., Flow injection chemiluminescence sensor using core-shell molecularly imprinted polymers as recognition element for determination of dapsone.
Analytical and Bioanalytical Chemistry, 404, (1), 79-88, (2012)
   

Lu FG et al., Flow injection chemiluminescence sensor based on core-shell magnetic molecularly imprinted nanoparticles for determination of chrysoidine in food samples.
Sensors and Actuators B: Chemical, 173, 591-598, (2012)
   

Lu FG et al., Flow injection chemiluminescence sensor based on core-shell magnetic molecularly imprinted nanoparticles for determination of sulfadiazine.
Analytica Chimica Acta, 718, (1), 84-91, (2012)
   

Qiu HM et al., Determination of l-tryptophan based on graphene oxide-magnetite-molecularly imprinted polymers and chemiluminescence.
Talanta, 98, 226-230, (2012)
   

Qiu HM et al., A chemiluminescence sensor for determination of epinephrine using graphene oxide - magnetite-molecularly imprinted polymers.
Carbon, 50, (11), 4052-4060, (2012)
   

Qiu HM et al., A chemiluminescence array sensor based on graphene-magnetite-molecularly imprinted polymers for determination of benzenediol isomers.
Analytica Chimica Acta, 744, 75-81, (2012)
   

Qiu HM et al., Determination of l-phenylalanine on-line based on molecularly imprinted polymeric microspheres and flow injection chemiluminescence.
Spectrochimica Acta Part A-Molecular and Biomolecular Spctroscopy, 86, (1), 456-460, (2012)
   

Qiu HM et al., A novel chemiluminescence sensor for determination of quercetin based on molecularly imprinted polymeric microspheres.
Food Chemistry, 134, (1), 469-473, (2012)
   

Qiu HM et al., Determination sulfamethoxazole based chemiluminescence and chitosan/graphene oxide-molecularly imprinted polymers.
Carbohydrate Polymers, 92, (1), 394-399, (2013)
   

Qiu HM et al., A microflow chemiluminescence sensor for indirect determination of dibutyl phthalate by hydrolyzing based on biological recognition materials.
Journal of Pharmaceutical and Biomedical Analysis, 75, 123-129, (2013)
   

Qiu HW

Qiu HW et al., Rapid determination of memantine in human plasma by using nanoring carboxyl-functionalized paramagnetic molecularly imprinted polymer d-[mu]-SPE and UFLC-MS/MS.
Drug Testing and Analysis, 7, (6), 535-543, (2015)
   

Ma JB et al., Fast determination of catecholamines in human plasma using carboxyl-functionalized magnetic-carbon nanotube molecularly imprinted polymer followed by liquid chromatography-tandem quadrupole mass spectrometry.
Journal of Chromatography A, 1429, 86-96, (2016)
   

Qiu J

Zhang L et al., Study on the preparation of two kinds of chlorpyrifos imprinted polymers and its recognition properties.
Journal of Food Safety and Quality, 4, (1), 61-70, (2013)
   

Zhang L et al., Preparation and Characterization of Broad-Spectrum Artificial Antibody for OPPs Based on Dummy Template Imprinting Technique.
International Journal of Polymer Analysis and Characterization, 19, (6), 510-521, (2014)
   

Liu Y et al., Synthesis of hydrophilic surface ion-imprinted polymer based on graphene oxide for removal of strontium from aqueous solution.
Journal of Materials Chemistry A, 3, (3), 1287-1297, (2015)
   

Liu Y et al., Preparation of a Two-Dimensional Ion-Imprinted Polymer Based on a Graphene Oxide/SiO2 Composite for the Selective Adsorption of Nickel Ions.
Langmuir, 31, (32), 8841-8851, (2015)
   

Liu Y et al., A modeling study by response surface methodology (RSM) on Sr(II) ion dynamic adsorption optimization using a novel magnetic ion imprinted polymer.
RSC Advances, 6, (60), 54679-54692, (2016)
   

Liu Y et al., RAFT-mediated microemulsion polymerization to synthesize a novel high-performance graphene oxide-based cadmium imprinted polymer.
Chemical Engineering Journal, 302, 609-618, (2016)
   

Liu Y et al., Selective Ce(III) ion-imprinted polymer grafted on Fe3O4 nanoparticles supported by SBA-15 mesopores microreactor via surface-initiated RAFT polymerization.
Microporous And Mesoporous Materials, 234, 176-185, (2016)
   

Liu Y et al., Tailor-made ion-imprinted polymer based on functionalized graphene oxide for the preconcentration and determination of trace copper in food samples.
Journal of Separation Science, 39, (7), 1371-1378, (2016)
   

Qin CC et al., A Novel Electrochemical Sensor Based on Graphene Oxide Decorated with Silver Nanoparticles-Molecular Imprinted Polymers for Determination of Sunset Yellow in Soft Drinks.
Food Analytical Methods, 10, (7), 2293-2301, (2017)
   

Qiu JD

Wang Y et al., Applications of Disease Markers Molecularly Imprinting Technology in Separation and Sensing.
Chinese Journal of Analytical Chemistry, 41, (5), 787-794, (2013)
   

Yao GH et al., Surface Plasmon Resonance Sensor Based on Magnetic Molecularly Imprinted Polymers Amplification for Pesticide Recognition.
Analytical Chemistry, 85, (24), 11944-11951, (2013)
   

Wang XN et al., One-step synthesis of mussel-inspired molecularly imprinted magnetic polymer as stationary phase for chip-based open tubular capillary electrochromatography enantioseparation.
Journal of Chromatography A, 1362, 301-308, (2014)
   

Chen J et al., A norepinephrine coated magnetic molecularly imprinted polymer for simultaneous multiple chiral recognition.
Journal of Chromatography A, 1409, 268-276, (2015)
   

Qiu JH

Qiu JH et al., Application of surface-initiated atom transfer radical polymerization in membranes technology.
Polymer Materials Science and Engineering, 26, (7), 167-169, 174, (2010)
   

Wu HF et al., Adsorption performance for bromine ion using bromide ion-lanthanum nitrate modified chitosan imprinted polymer.
Analytical Methods, 6, (6), 1890-1896, (2014)
   

Qiu JL

Chen GS et al., Boronate Affinity-Molecularly Imprinted Biocompatible Probe: An Alternative for Specific Glucose Monitoring.
Chemistry - An Asian Journal, 11, (16), 2240-2245, (2016)
   

Qiu JX

Qiu JX et al., Recent applications of TiO2 nanomaterials in chemical sensing in aqueous media.
Sensors and Actuators B: Chemical, 160, (1), 875-890, (2011)
   

Qiu L

Du ZF et al., Technology and application progress of thermosensitive molecularly imprinted polymer.
Modern Chemical Industry, 35, (11), 27-31, (2015)
   

Kang RF et al., A novel magnetic and hydrophilic ion-imprinted polymer as a selective sorbent for the removal of cobalt ions from industrial wastewater.
Journal of Environmental Chemical Engineering, 4, (2), 2268-2277, (2016)
   

Qiu LH

Wei Y et al., Encapsulation of quantum dots and carbon nanotubes with polypyrrole in a syringe needle for automated molecularly imprinted solid phase pre-concentration of ochratoxin A in red wine analysis.
Sensing and Instrumentation for Food Quality and Safety, 1, (3), 133-141, (2007)
   

Wei Y et al., Molecularly Imprinted Solid Phase Extraction in a Syringe Needle Packed with Polypyrrole-encapsulated Carbon Nanotubes for Determination of Ochratoxin A in Red Wine.
Food Science and Technology International, 13, (5), 375-380, (2007)
   

Qiu LJ

Qiu LJ et al., Preparation and application of solid-phase microextraction fiber based on molecularly imprinted polymer for determination of anabolic steroids in complicated samples.
Journal of Chromatography A, 1217, (48), 7461-7470, (2010)
   

Qiu LL

Lu W et al., Visual detection of 2, 4, 6-trinitrotolune by molecularly imprinted colloidal array photonic crystal.
Journal of Hazardous Materials, 316, 87-93, (2016)
   

Ma XQ et al., Solanesol extraction from tobacco leaves by Flash chromatography based on molecularly imprinted polymers.
Journal of Chromatography B, 1020, 1-5, (2016)
   

Lu W et al., Colorimetric sensor arrays based on pattern recognition for the detection of nitroaromatic molecules.
Journal of Hazardous Materials, 326, 130-137, (2017)
   

Wang J et al., Separation of 1, 3, 5, 7-tetranitro-1, 3, 5, 7-tetraazacyclooctane and 1, 3, 5-trinitro-1, 3, 5- triazacyclohexane by molecularly imprinted solid-phase extraction.
Journal of Separation Science, 40, (5), 1201-1208, (2017)
   

Wang J et al., Simultaneous selective extraction of nitramine explosives using molecularly imprinted polymer hollow spheres from post blast samples.
New Journal of Chemistry, 41, (3), 1129-1136, (2017)
   

Qiu MD

Wang H et al., Determination of dicofol in aquatic products using molecularly imprinted solid-phase extraction coupled with GC-ECD detection.
Talanta, 85, (4), 2100-2105, (2011)
   

Yang X et al., Synthesis of a novel molecularly imprinted organic-inorganic hybrid polymer for the selective isolation and determination of fluoroquinolones in tilapia.
Journal of Chromatography B, 945-946, 127-134, (2014)
   

Qiu PZ

Xiao DL et al., Applications of magnetic surface imprinted materials for solid phase extraction of levofloxacin in serum samples.
Journal of Molecular Recognition, 28, (5), 277-284, (2015)
   

Qiu S

Zuo JJ et al., A New Molecularly Imprinted Polymer (MIP)-based Electrochemical Sensor for Monitoring Cardiac Troponin I (cTnI) in the Serum.
Electroanalysis, 28, (9), 2044-2049, (2016)
   

Zhao XY et al., Reduced Graphene Oxide-Modified Screen-Printed Carbon (rGO-SPCE)-Based Disposable Electrochemical Sensor for Sensitive and Selective Determination of Ethyl Carbamate.
Food Analytical Methods, 10, (10), 3329-3337, (2017)
   

Qiu SC

Qiu SC et al., Application of molecular imprinting technique in residue analysis of veterinary drugs in food.
Journal of Food Safety and Quality, 6, (6), 2248-2255, (2015)
   

Qiu SL

Zhang ZT et al., Molecularly imprinted zeolites and molecule sieves.
Abstracts of Papers of the American Chemical Society, 220, (INOR), 347-347, (2000)
   

Zhang ZT et al., Ion-imprinted zeolite: A surface functionalization methodology based on the "ship-in-bottle" technique.
Advanced Materials, 13, (7), 493-496, (2001)
   

Qiu T

Wang ZH et al., The synthesis of hydrophilic molecularly imprinted polymer microspheres and their application for selective removal of bisphenol A from water.
Reactive and Functional Polymers, 116, 69-76, (2017)
   

Qiu TB

Li Y et al., Preparation of lead-ion imprinted crosslinked electro-spun chitosan nanofiber mats and application in lead ions removal from aqueous solutions.
European Polymer Journal, 49, (6), 1487-1494, (2013)
   

Li Y et al., Crosslinked Electro-Spun Chitosan Nanofiber Mats with Cd(II) as Template Ions for Adsorption Applications.
Journal of Nanoscience and Nanotechnology, 15, (6), 4245-4254, (2015)
   

Qiu TT

Ning FJ et al., Dummy-surface molecularly imprinted polymers on magnetic graphene oxide for rapid and selective quantification of acrylamide in heat-processed (including fried) foods.
Food Chemistry, 221, 1797-1804, (2017)
   

Qiu TY

Sun Y et al., Interconnectivity of macroporous molecularly imprinted polymers fabricated by hydroxyapatite-stabilized Pickering high internal phase emulsions-hydrogels for the selective recognition of protein.
Colloids and Surfaces B: Biointerfaces, 155, 142-149, (2017)
   

Qiu WQ

Wang XY et al., Absorption Characteristics of the Molecule-Imprinted Polymer of Pleuromutilin.
Lishizhen Medicine and Materia Medica Research, 22, (4), 825-828, (2011)
   

Qiu XH

Yuan XH et al., Synthesis and molecule recognition capability of corilagin-molecularly imprinted polymer.
Acta Pharmaceutica Sinica, 42, (11), 1218-1221, (2007)
   

Qiu XZ

Qiu XZ et al., Preparation of microcystin-LR molecularly imprinted polymer coated stir bar and its adsorptive performances.
Chinese Journal of Chromatography, 32, (11), 1214-1218, (2014)
   

Qiu XZ et al., Determination of Resveratrol in Peanut Root Using Molecularly Imprinted Polymers Multiplug Filtration Clean up Column Coupled with Fluorescence Spectrometry.
Journal of Instrumental Analysis, 34, (12), 1403-1407, (2015)
   

Qiu XZ et al., Determination of Phenolic Compounds in Environmental Water by HPLC Combination with On-Line Solid-Phase Extraction Using Molecularly Imprinted Polymers.
Journal of Nanoscience and Nanotechnology, 15, (12), 9578-9584, (2015)
   

Qiu XZ et al., Fabrication of Novel Stir Bar Sorptive Extraction Coating Based on Magnetic Molecularly Imprinted Polymer Through Atom Transfer Radical Polymerization for Trace Analysis of Estrogens in Milk.
Journal of Nanoscience and Nanotechnology, 16, (12), 12374-12381, (2016)
   

Qiu XZ et al., Fabrication of a molecularly imprinted polymer immobilized membrane with nanopores and its application in determination of [beta]2-agonists in pork samples.
Journal of Chromatography A, 1429, 79-85, (2016)
   

Qiu Y

Hu XB et al., Construction of Self-Reporting Specific Chemical Sensors with High Sensitivity.
Advanced Materials, 19, (24), 4327-4332, (2007)
   

Qiu YJ

Dong Y et al., Experimental Investigation on the Molecularly Imprinted Polymer Receptor for Hydrochlorothiazide.
Journal of Jiangsu Polytechnic University, 19, (4), 21-24, (2007)
   

Qiu YL

Zhu LY et al., Synthesis and adsorption performance of lead ion-imprinted micro-beads with combination of two functional monomers.
Journal of Environmental Sciences, 22, (12), 1955-1961, (2011)
   

Pan MH et al., Synthesis of Magnetic As(V)-Imprinted Polymers and Their Adsorption Performances for Arsenate in Water Solutions.
Fresenius Environmental Bulletin, 23, (1), 122-129, (2014)
   

Zhu LY et al., Synthesis of As(V)-Cr(III) Co-Imprinted Polymer and Its Adsorption Performance for Arsenate Species.
Separation Science and Technology, 49, (10), 1584-1591, (2014)
   

Zhang W et al., Selective removal of genotoxic compound p-nitroaniline from water by a novel molecular imprinted polymer.
Fresenius Environmental Bulletin, 25, (6), 2131-2144, (2016)
   

Zhang W et al., Selective Removal of the Genotoxic Compound 2-Aminopyridine in Water using Molecularly Imprinted Polymers Based on Magnetic Chitosan and [beta]-Cyclodextrin.
International Journal of Environmental Research and Public Health, 14, (9), ArticleNo991-(2017)
   

Qiu YX

Zhang KL et al., A pH/glutathione double responsive drug delivery system using molecular imprint technique for drug loading.
Applied Surface Science, 389, 1208-1213, (2016)
   

Qiu ZY

Qiu ZY et al., Preparation and Separation Properties of Molecularly Imprinted Composite Membranes with Nicotinic Acid as Template.
Acta Chimica Sinica, 68, (3), 246-250, (2010)
   

Qu BH

Wang LJ et al., Rapid determination of 15 [beta]2-agonists residues in swine urine by ultra performance liquid chromatography-tandem mass spectrometry coupled with molecularly imprinted solid phase extraction.
Chinese Journal of Chromatography, 34, (3), 240-248, (2016)
   

Qu C

Liang YM et al., Molecularly imprinted electrochemical sensor for daidzein recognition and detection based on poly(sodium 4-styrenesulfonate) functionalized graphene.
Sensors and Actuators B: Chemical, 251, 542-550, (2017)
   

Qu D

Yu LZ et al., Preparation and Application for Kaempferol Molecularly-imprinted Polymers.
Chemistry and Industry of Forest Products, 31, (4), 19-24, (2011)
   

Qu DJ

Xin JH et al., Determination of Trace Sudan IV Residues in Foods Through Molecularly Imprinted SPE Coupled with LC.
Chromatographia, 73, (3), 235-242, (2011)
   

Qu F

Gai QQ et al., Superparamagnetic lysozyme surface-imprinted polymer prepared by atom transfer radical polymerization and its application for protein separation.
Journal of Chromatography A, 1217, (31), 5035-5042, (2010)
   

Gai QQ et al., The Preparation of BHb-Molecularly Imprinted Gel Polymers and Its Selectivity Comparison to BHb and BSA.
Separation Science and Technology, 45, (16), 2394-2399, (2010)
   

Gai QQ et al., The preparation of bovine serum albumin surface-imprinted superparamagnetic polymer with the assistance of basic functional monomer and its application for protein separation.
Journal of Chromatography A, 1218, (22), 3489-3495, (2011)
   

Chen W et al., Protein recognition by a surface imprinted colloidal array.
Journal of Materials Chemistry A, 2, (20), 7165-7169, (2014)
   

Chen W et al., Molecularly imprinted hollow sphere array for the sensing of proteins.
Journal of Biophotonics, 8, (10), 838-845, (2015)
   

Gai QQ et al., Preparation and adsorption characteristics of surface-imprinted polymer using bovine serum albumin and lysozyme as double template proteins.
Chinese Journal of Chromatography, 33, (5), 475-480, (2015)
   

Qu GR

Shi XZ et al., Development and characterisation of molecularly imprinted polymers based on methacrylic acid for selective recognition of drugs.
Biomaterials, 28, (25), 3741-3749, (2007)
   

Shi XZ et al., Corrigendum to "Development and characterisation of molecularly imprinted polymers based on methacrylic acid for selective recognition of drugs": [Biomaterials 28 (2007) 3741-3749].
Biomaterials, 28, (29), 4330-4330, (2007)
   

Qu GR et al., Improvement on Analyte Extraction by Molecularly Imprinted Polymer Microspheres toward Enrofloxacin.
Analytical Letters, 41, (8), 1443-1458, (2008)
   

Qu GR et al., Metal ion mediated synthesis of molecularly imprinted polymers targeting tetracyclines in aqueous samples.
Journal of Chromatography B, 877, (27), 3187-3193, (2009)
   

Zheng SL et al., Newly Combined Method of Molecularly Imprinted Solid-Phase Extraction with ELISA for Rapid Detection of Clenbuterol in Animal-Tissue Samples.
Analytical Letters, 42, (3), 600-614, (2009)
   

Shi XZ et al., Water Compatible Molecularly Imprinted Polymer Microspheres for Extraction of Ampicillin in Foods.
Analytical Letters, 43, (5), 757-767, (2010)
   

Qu HM

Yang LW et al., Synthesis and Recognition-Function of Ursolic Acid-Imprinted Polymer on Silica Surface.
Chinese Journal of Applied Chemistry, 25, (2), 137-141, (2008)
   

Qu JH

Liu HJ et al., Improvement of metal adsorption onto chitosan/Sargassum sp. composite sorbent by an innovative ion-imprint technology.
Water Research, 45, (1), 145-154, (2011)
   

Qu JN

Luo CH et al., Thickness-shear mode acoustic sensor for atrazine using molecularly imprinted polymer as recognition element.
Analytica Chimica Acta, 428, (1), 143-148, (2001)
   

Qu JR

Fu XW et al., Preparation and utilization of molecularly imprinted polymer for chlorsulfuron extraction from water, soil, and wheat plant.
Environmental Monitoring and Assessment, 184, (7), 4161-4170, (2012)
   

Qu JR et al., Synthesis and utilisation of molecular imprinting polymer for clean-up of propachlor in food and environmental media.
Food Chemistry, 135, (3), 1148-1156, (2012)
   

Guo LJ et al., Development of a molecularly imprinted polymer for prometryne clean-up in the environment.
Journal of Separation Science, 36, (24), 3911-3917, (2013)
   

Qu LB

Liang YM et al., Molecularly imprinted electrochemical sensor for daidzein recognition and detection based on poly(sodium 4-styrenesulfonate) functionalized graphene.
Sensors and Actuators B: Chemical, 251, 542-550, (2017)
   

Liang YM et al., High sensitive and selective graphene oxide/molecularly imprinted polymer electrochemical sensor for 2, 4-dichlorophenol in water.
Sensors and Actuators B: Chemical, 240, 1330-1335, (2017)
   

Qu LJ

Qu LJ et al., Quartz Crystal Microbalance for Determination of Parathion with Molecularly Imprinted Polymers as Recognition Elements.
Analysis and Testing Technology and Instruments, 16, (1), 11-16, (2010)
   

Liu Z et al., Preparation and affinity assessment of parathion molecularly imprinted polymers.
Polymer Materials Science and Engineering, 27, (3), 83-86+91, (2011)
   

Liu N et al., Rapid detection of endosulfan by a molecularly imprinted polymer microsphere modified quartz crystal microbalance.
Analytical Methods, 5, (17), 4442-4447, (2013)
   

Qu LL

Xue JQ et al., Surface-imprinted core-shell Au nanoparticles for selective detection of bisphenol A based on surface-enhanced Raman scattering.
Analytica Chimica Acta, 777, 57-62, (2013)
   

Qu M

Zhang XX et al., Synthesis and Application of Molecularly Imprinted Polymer.
Guangzhou Chemical Industry, 40, (9), 6-10, (2012)
   

Qu P

Qu P et al., Enantioseparation and Amperometric Detection of Chiral Compounds by in Situ Molecular Imprinting on the Microchannel Wall.
Analytical Chemistry, 81, (23), 9651-9656, (2009)
   

Qu P et al., Molecularly imprinted magnetic nanoparticles as tunable stationary phase located in microfluidic channel for enantioseparation.
Journal of Chromatography A, 1217, (39), 6115-6121, (2010)
   

Qu P et al., Convenient enantioseparation by monolithic imprinted capillary clamped in a chip with electrochemical detection.
Electrophoresis, 32, (12), 1522-1529, (2011)
   

Qu P et al., Simultaneous multiple enantioseparation with a one-pot imprinted microfluidic channel by microchip capillary electrochromatography.
Analyst, 136, (5), 920-926, (2011)
   

Qu Q

Zhang WL et al., Novel surface molecularly imprinted polymers as solid-phase extraction sorbents for selective extraction of dihydroxybenzenes from environmental water samples.
Fresenius Environmental Bulletin, 22, (8), 2324-2333, (2013)
   

Gan MY et al., Molecularly imprinted polymers derived from lignin-based Pickering emulsions and their selectively adsorption of lambda-cyhalothrin.
Chemical Engineering Journal, 257, 317-327, (2014)
   

Pan JM et al., Molecularly imprinted polymer foams with well-defined open-cell structure derived from Pickering HIPEs and their enhanced recognition of [lambda]-cyhalothrin.
Chemical Engineering Journal, 253, 138-147, (2014)
   

Zhu WJ et al., Magnetic molecularly imprinted microspheres via yeast stabilized Pickering emulsion polymerization for selective recognition of [lambda]-cyhalothrin.
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 453, 27-36, (2014)
   

Qu QS

Yang C et al., Pending templates imprinted polymers - hypothesis, synthesis, adsorption, and chromatographic properties.
Electrophoresis, 34, (9-10), 1383-1389, (2013)
   

Yang C et al., Sample-Imprinted Polymer Potentially for Protein Depletion and Enrichment.
Analytical Chemistry Letters, 3, (1), 40-45, (2013)
   

Qu RJ

Liu CP et al., Study on the adsorption property of copper (II) imprinted chelating resin for metal ions.
Ion Exchange and Adsorption, 19, (6), 504-510, (2003)
   

Ying XG et al., Specific rebinding property of protein macromolecularly imprinted polymer microspheres based on calcium alginate hydrogel via gas jetting-dropping method.
Journal of Applied Polymer Science, 117, (4), 2331-2339, (2010)
   

Zhang SH et al., Progress in Syntheses and Investigation of Molecular Imprinting Polymers on Silica-Gel Surface.
Chinese Polymer Bulletin, (4), 17-29, (2010)
   

Sun CM et al., Syntheses of polyamine-bridged polysilsesquioxanes hybrid materials combining sol-gel processing and molecular imprinting applied to selective adsorption for copper.
Materials Chemistry and Physics, 153, 307-315, (2015)
   

Qu RL

Feng RT et al., Review on enzyme mimics.
Chinese Journal of Organic Chemistry, 23, (8), 893-899, (2003)
   

Qu SS

Qu SS et al., Metal ion mediated molecularly imprinted polymer for selective capturing antibiotics containing beta-diketone structure.
Journal of Chromatography A, 1217, (52), 8205-8211, (2010)
   

Qu TT

Du B et al., A novel restricted access material combined to molecularly imprinted polymers for selective solid-phase extraction and high performance liquid chromatography determination of 2-methoxyestradiol in plasma samples.
Talanta, 129, 465-472, (2014)
   

Qu X

Zhang YX et al., 13C NMR aided design of molecularly imprinted adsorbents for selectively preparative separation of erythromycin.
Journal of Materials Chemistry B, 2, (10), 1390-1399, (2014)
   

Wu G et al., Template size matched film thickness for effectively in situ surface imprinting: a model study of glycoprotein imprints.
RSC Advances, 5, (58), 47010-47021, (2015)
   

Zhang YX et al., Effect of the solvent on improving the recognition properties of surface molecularly imprinted polymers for precise separation of erythromycin.
RSC Advances, 5, (102), 83619-83627, (2015)
   

Qu X et al., Selective extraction of bioactive glycoprotein in neutral environment through Concanavalin A mediated template immobilization and dopamine surface imprinting.
RSC Advances, 6, (89), 86455-86463, (2016)
   

Qu XG

Zhang ZJ et al., Highly stable and reusable imprinted artificial antibody used for in situ detection and disinfection of pathogens.
Chemical Science, 6, (5), 2822-2826, (2015)
   

Zhang ZJ et al., Programmable Downregulation of Enzyme Activity Using a Fever and NIR-Responsive Molecularly Imprinted Nanocomposite.
Small, 11, (46), 6172-6178, (2015)
   

Zhang ZJ et al., Cell-Imprinted Antimicrobial Bionanomaterials with Tolerable Toxic Side Effects.
Small, 11, (11), 1258-1264, (2015)
   

Li W et al., A [beta]-Lactamase-Imprinted Responsive Hydrogel for the Treatment of Antibiotic-Resistant Bacteria.
Angewandte Chemie International Edition, 55, (28), 8049-8053, (2016)
   

Qu XJ

Qu XJ et al., Progress in the preparation of molecular imprinted polymer.
Journal of Shandong Agricultural University (Natural Science), 31, (4), 457-462, (2000)
   

Gao JG et al., Characteristics of molecular recognition of plant hormone H-1-indole-3-acetic acid molecular template polymer.
Chinese Journal of Analytical Chemistry, 31, (10), 1173-1177, (2003)
   

Qu XJ et al., Transport Selectivity of a Diethylene Glycol Dimethacrylate-Based Thymine-imprinted Polymeric Membrane over a Cellulose Support for Nucleic Acid Bases.
Chinese Journal of Chemistry, 25, (2), 213-218, (2007)
   

Qu XJ et al., Recognition of 6-benzyladenine using a molecularly imprinted membrane on a cellulose acetate support.
Journal of Analytical Chemistry, 63, (10), 999-1004, (2008)
   

Ma YF et al., Electrochemical synthesis of L-tryotophan molecular imprinting film sensor and its application.
Journal of Shandong Agricultural University (Natural Science), 40, (2), 254-258, (2009)
   

Ma YF et al., Determination of atrazine in soil sample based on molecularly imprinted film electrochemical sensors.
Chemical Research and Application, 21, (5), 624-629, (2009)
   

Qu YH

Qu YH et al., Electrochemical Sensor Prepared from Molecularly Imprinted Polymer for Recognition of 1, 3-Dinitrobenzene (DNB).
Chinese Journal of Chemistry, 27, (10), 2043-2048, (2009)
   

Qu YT

Wei XX et al., Synthesis of molecularly imprinted microspheres of [alpha]-tocopherol and evaluation of their absorption property.
Journal of Food Safety and Quality, 6, (3), 843-850, (2015)
   

Qu Z

Deng GR et al., The application of molecularly imprinted polymer in the separation of chiral drugs and recognition of bio-molecules.
Acta Academiae Medicinae CPAPF, 12, (4), 306-308+311, (2003)
   

Qu Z et al., The application of molecularly imprinted polymer in enzyme-mimicking catalysis.
Acta Academiae Medicinae CPAPF, 12, (3), 229-230, (2003)
   

Qu ZB

Zhou Y et al., A novel composite of graphene quantum dots and molecularly imprinted polymer for fluorescent detection of paranitrophenol.
Biosensors and Bioelectronics, 52, 317-323, (2014)
   

Quaglia M

Quaglia M et al., Target analogue imprinted polymers with affinity for folic acid and related compounds.
Journal of the American Chemical Society, 123, (10), 2146-2154, (2001)
   

Quaglia M et al., Surface initiated molecularly imprinted polymer films: a new approach in chiral capillary electrochromatography.
Analyst, 126, (9), 1495-1498, (2001)
   

Hall AJ et al., A substructure approach toward polymeric receptors targeting dihydrofolate reductase inhibitors. 2. Molecularly imprinted polymers against Z-L-glutamic acid showing affinity for larger molecules.
Journal of Organic Chemistry, 68, (23), 9132-9135, (2003)
   

Quaglia M et al., Molecularly imprinted polymer films grafted from porous or nonporous silica: Novel affinity stationary phases in capillary electrochromatography.
Electrophoresis, 24, (6), 952-957, (2003)
   

Manesiotis P et al., An enantioselective imprinted receptor for Z-glutamate exhibiting a binding induced color change.
Chemical Communications, (20), 2278-2279, (2004)
   

Quaglia M et al., Approaches to imprinted stationary phases for affinity capillary electrochromatography.
Journal of Chromatography A, 1044, (1-2), 53-66, (2004)
   

Hall AJ et al., Urea host monomers for stoichiometric molecular imprinting of oxyanions.
Journal of Organic Chemistry, 70, (5), 1732-1736, (2005)
   

Hall AJ et al., Polymeric Receptors for the Recognition of Folic Acid and Related Compounds via Substructure Imprinting.
Analytical Chemistry, 78, (24), 8362-8367, (2006)
   

Quan CM

Ye XS et al., Proceeding, The Preparation and Adsorption Properties of Li+-Imprinted Hybrid Gels, 
Tsing L, Luo AQ (Eds.), 435-440, (2016)
   

Quan HJ

Li ZY et al., Photocontrolled solid-phase extraction of guanine from complex samples using a novel photoresponsive molecularly imprinted polymer.
Food Chemistry, 172, 56-62, (2015)
   

Quan J

Ding ZQ et al., Molecularly imprinted polymer based on MWCNT-QDs as fluorescent biomimetic sensor for specific recognition of target protein.
Materials Science and Engineering: C, 48, 469-479, (2015)
   

Quan LS

Yang H et al., Pharmacokinetic study of liquiritin in rat serum using molecularly imprinted solid-phase extraction combined with RP-HPLC.
Analytical Methods, 6, (5), 1563-1568, (2014)
   

Quan X

Lu N et al., Synthesis of molecular imprinted polymer modified TiO2 nanotube array electrode and their photoelectrocatalytic activity.
Journal of Solid State Chemistry, 181, (10), 2852-2858, (2008)
   

Tan F et al., Preparation and evaluation of molecularly imprinted solid-phase microextraction fibers for selective extraction of bisphenol A in complex samples.
Journal of Chromatography A, 1216, (30), 5647-5654, (2009)
   

Yu CY et al., Separation of Phthalocyanine-like Substances from Humic Acids Using a Molecular Imprinting Method and Their Photochemical Activity under Simulated Sunlight Irradiation.
Journal of Agricultural and Food Chemistry, 57, (15), 6927-6931, (2009)
   

Yu CY et al., Photochemical Effect of Humic Acid Components Separated Using Molecular Imprinting Method Applying Porphyrin-like Substances as Templates in Aqueous Solution.
Environmental Science & Technology, 44, (15), 5812-5817, (2010)
   

Tan F et al., Evaluation of a novel microextraction technique for aqueous samples: Porous membrane envelope filled with multiwalled carbon nanotubes coated with molecularly imprinted polymer.
Journal of Separation Science, 34, (6), 707-715, (2011)
   

Wang HT et al., Electrochemical Determination of Tetracycline Using Molecularly Imprinted Polymer Modified Carbon Nanotube-Gold Nanoparticles Electrode.
Electroanalysis, 23, (8), 1863-1869, (2011)
   

Liu X et al., An electrochemically enhanced solid-phase microextraction approach based on molecularly imprinted polypyrrole/multi-walled carbon nanotubes composite coating for selective extraction of fluoroquinolones in aqueous samples.
Analytica Chimica Acta, 727, (1), 26-33, (2012)
   

Wang HT et al., Enhanced photocatalytic degradation of tetracycline hydrochloride by molecular imprinted film modified TiO2 nanotubes.
Chinese Science Bulletin, 57, (6), 601-605, (2012)
   

Zhao HM et al., Selectively Electrochemical Determination of Chloramphenicol in Aqueous Solution Using Molecularly Imprinted Polymer-Carbon Nanotubes-Gold Nanoparticles Modified Electrode.
Journal of The Electrochemical Society, 159, (6), J231-J236, (2012)
   

Tan F et al., Preparation of molecularly imprinted polymer nanoparticles for selective removal of fluoroquinolone antibiotics in aqueous solution.
Journal of Hazardous Materials, 244-245, 750-757, (2013)
   

Zhao HM et al., Amperometric Sensor for Tetracycline Determination Based on Molecularly Imprinted Technique.
Procedia Environmental Sciences, 18, 249-257, (2013)
   

Tan F et al., Molecularly imprinted polymer/mesoporous carbon nanoparticles as electrode sensing material for selective detection of ofloxacin.
Materials Letters, 129, 95-97, (2014)
   

Zhao Y et al., An electrochemical sensor for selective determination of sulfamethoxazole in surface water using a molecularly imprinted polymer modified BDD electrode.
Analytical Methods, 7, (6), 2693-2698, (2015)
   

Tan F et al., An electrochemical sensor based on molecularly imprinted polypyrrole/graphene quantum dots composite for detection of bisphenol A in water samples.
Sensors and Actuators B: Chemical, 233, 599-606, (2016)
   

Quan Y

Quan Y et al., Study on Preparation and Performances of Acrylamide Molecularly Imprinted Polymers.
Food and Fermentation Industries, (12), 177-180, (2010)
   

Que XH

Liu BQ et al., Au(III)-promoted magnetic molecularly imprinted polymer nanospheres for electrochemical determination of streptomycin residues in food.
Biosensors and Bioelectronics, 41, 551-556, (2013)
   

Que XH et al., Molecular Imprint for Electrochemical Detection of Streptomycin Residues Using Enzyme Signal Amplification.
Electroanalysis, 25, (2), 531-537, (2013)
   

Queiros RB

Queiros RB et al., Determination of Microcystin-LR in waters in the subnanomolar range by sol-gel imprinted polymers on solid contact electrodes.
Analyst, 137, (10), 2437-2444, (2012)
   

Queiroz MEC

Melo LP et al., A molecularly imprinted polymer for microdisc solid-phase extraction of parabens from human milk samples.
Analytical Methods, 5, (14), 3538-3545, (2013)
   

Queiroz MEC et al., Selective capillary coating materials for in-tube solid-phase microextraction coupled to liquid chromatography to determine drugs and biomarkers in biological samples: A review.
Analytica Chimica Acta, 826, 1-11, (2014)
   

Miranda LFC et al., Selective solid-phase extraction using molecularly imprinted polymers for analysis of venlafaxine, O-desmethylvenlafaxine, and N-desmethylvenlafaxine in plasma samples by liquid chromatography-tandem mass spectrometry.
Journal of Chromatography A, 1458, 46-53, (2016)
   

Souza ID et al., Selective molecularly imprinted polymer combined with restricted access material for in-tube SPME/UHPLC-MS/MS of parabens in breast milk samples.
Analytica Chimica Acta, 932, 49-59, (2016)
   

Roldão MV et al., Development of Molecularly Imprinted Polymers for Solid Phase Extraction of Parabens in Plasma Samples and Analysis by UHPLC-MS/MS .
Journal of the Brazilian Chemical Society, 28, (2), 257-265, (2017)
   

Queiroz SCN

Queiroz SCN et al., Methods of extraction and/or concentration of compounds found in biological fluids for subsequent chromatographic determination.
Quimica Nova, 24, (1), 68-76, (2001)
   

Queirós RB

Queirós RB et al., Sensors for the Detection and Quantification of Bacterial Contamination in Water for Human Use.
Advanced Engineering Materials, 12, (5), B175-B178, (2010)
   

Queirós RB et al., Proceeding, Optical cavity fibre sensor for detection of microcystin-LR in water, 
In: Fourth European Workshop on Optical Fibre Sensors, Santos JL, Culshaw B, Lopez-Higuera JM, MacPherson WN (Eds.), Art. No. 76531N, (2010)
   

Queirós RB et al., Microcystin-LR detection in water by the Fabry-Pérot interferometer using an optical fibre coated with a sol-gel imprinted sensing membrane.
Biosensors and Bioelectronics, 26, (9), 3932-3937, (2011)
   

Almeida SAA et al., Optimizing potentiometric ionophore and electrode design for environmental on-site control of antibiotic drugs: Application to sulfamethoxazole.
Biosensors and Bioelectronics, 35, (1), 319-326, (2012)
   

Queirós RB et al., Label-free Detection of Microcystin-LR in Waters Using Real-Time Potentiometric Biosensors Based on Single-Walled Carbon Nanotubes Imprinted Polymers.
Procedia Engineering, 47, 758-761, (2012)
   

Moreira FTC et al., Host-tailored sensors for leucomalachite green potentiometric measurements.
Journal of Chemistry, 2013, Article ID 605403-(2013)
   

Queirós RB et al., Recycling old screen-printed electrodes with newly designed plastic antibodies on the wall of carbon nanotubes as sensory element for in situ detection of bacterial toxins in water.
Sensors and Actuators B: Chemical, 189, 21-29, (2013)
   

Quesada-Molina C

Quesada-Molina C et al., Convenient solid phase extraction of cephalosporins in milk using a molecularly imprinted polymer.
Food Chemistry, 135, (2), 775-779, (2012)
   

Quinn LP

Mkhize DS et al., Molecularly imprinted membranes (MIMs) for selective removal of polychlorinated biphenyls (PCBs) in environmental waters: fabrication and characterization.
Environmental Science and Pollution Research, 24, (12), 11694-11707, (2017)
   

Quinn PJ

McStay D et al., Raman spectroscopy of molecular imprinted polymers.
Journal of Optics A: Pure and Applied Optics, 7, (6), S340-S345, (2005)
   

Quinones I

Chen YB et al., Influence of the pH on the behavior of an imprinted polymeric stationary phase - supporting evidence for a binding site model.
Journal of Chromatography A, 927, (1-2), 1-17, (2001)
   

Quint ML

Quint ML et al., Low-Range Detection of the Phosphate Group by a Molecularly Imprinted Polymer-Modified Carbon Paste Electrode.
IEEE Sensors Journal, 15, (2), 1012-1019, (2015)
   

Quintana JB

Quintana JB et al., Book chapter, Analysis of acidic drugs by gas chromatography, 
In: Analysis, Fate and Removal of Pharmaceuticals in the Water Cycle, Petrovic M (Ed.) Elsevier: Ch. 2.5, 185-218, (2007)
   

González-Mariño I et al., Comparison of molecularly imprinted, mixed-mode and hydrophilic balance sorbents performance in the solid-phase extraction of amphetamine drugs from wastewater samples for liquid chromatography-tandem mass spectrometry determination.
Journal of Chromatography A, 1216, (48), 8435-8441, (2009)
   

Quintana JP

Lee B et al., Scattering studies of nanoporous organosilicate thin films imprinted with reactive star porogens.
Macromolecules, 38, (22), 8991-8995, (2005)
   

Quintana MC

Quintana MC et al., Sample preparation for the determination of chlorophenols.
TrAC Trends in Analytical Chemistry, 27, (5), 418-436, (2008)
   

Quintela A

Gomez-Caballero A et al., Water compatible stir-bar devices imprinted with underivatised glyphosate for selective sample clean-up.
Journal of Chromatography A, 1451, 23-32, (2016)
   

Quirarte-Escalante CA

Quirarte-Escalante CA et al., Synthesis of Hybrid Adsorbents Combining Sol-Gel Processing and Molecular Imprinting Applied to Lead Removal from Aqueous Streams.
Chemistry of Materials, 21, (8), 1439-1450, (2009)
   

Quirino JP

Romano EF et al., Assessment of the binding performance of histamine-imprinted microspheres by frontal analysis capillary electrophoresis.
Electrophoresis, 38, (9-10), 1251-1259, (2017)
   

Quiroa-Montalvan CM

Gomez-Pineda LE et al., A Computational Approach to Studying Ciprofloxacin and Methacrylic Acid in Pre-Polymerization Phase.
Revista Mexicana de Ingenieria Quimica, 15, (2), 667-674, (2016)
   

Quiroa-Montalván CM

Gómez-Pineda LE et al., A Computational Approach to Studying Ciprofloxacin and Methacrylic Acid in Pre-polymerization Phase.
Revista Mexicana de Ingeniería Química, 15, (2), 667-674, (2016)
   

Qv X

Zhang YX et al., Recovery and separation of erythromycin from industrial wastewater by imprinted magnetic nanoparticles that exploit [beta]-cyclodextrin as the functional monomer.
Journal of Separation Science, 39, (2), 450-459, (2016)
   



Molecules Special Issue call     Sensors Special Issue call






Join the Society for Molecular Imprinting
Logo of the Society for Molecular Imprinting

New items RSS feed
new items RSS feed  View latest updates

Sign-up for e-mail updates:
Choose between receiving an occasional newsletter or more frequent e-mail alerts.
Click here to go to the sign-up page.


Is your name elemental or peptidic? Enter your name and find out by clicking either of the buttons below!
Other products you may like:
view listings for MIP books on eBay:
UK listings   US listings

Searching for Molecular Imprinting books on Amazon.co.uk:
Molecular Imprinting
Imprinted Polymers
Polymer Chemistry
Organic Chemistry
Biosensors

Lab supplies and Glassware